d/numam-dpdk
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
25b73ba6f3
numam-dpdk/drivers/net/bnxt/hsi_struct_def_dpdk.h
Thierry Herbelot 8f87ba7015 fix typos 
Repeated occurrences of 'the'.

The change was obtained using the following command:

  sed -i "s;the the ;the ;" `git grep -l "the "`

Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
2018-01-11 18:26:46 +01:00

12295 lines
441 KiB
C
Raw Blame History

/*-
* BSD LICENSE
*
* Copyright(c) 2001-2017 Broadcom Limited.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Broadcom Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _HSI_STRUCT_DEF_DPDK_
#define _HSI_STRUCT_DEF_DPDK_
/* HSI and HWRM Specification 1.8.2 */
#define HWRM_VERSION_MAJOR 1
#define HWRM_VERSION_MINOR 8
#define HWRM_VERSION_UPDATE 2
#define HWRM_VERSION_RSVD 0 /* non-zero means beta version */
#define HWRM_VERSION_STR "1.8.2.0"
/*
* Following is the signature for HWRM message field that indicates not
* applicable (All F's). Need to cast it the size of the field if needed.
*/
#define HWRM_NA_SIGNATURE ((uint32_t)(-1))
#define HWRM_MAX_REQ_LEN (128) /* hwrm_func_buf_rgtr */
#define HWRM_MAX_RESP_LEN (280) /* hwrm_selftest_qlist */
#define HW_HASH_INDEX_SIZE 0x80 /* 7 bit indirection table index. */
#define HW_HASH_KEY_SIZE 40
#define HWRM_RESP_VALID_KEY 1 /* valid key for HWRM response */
#define HWRM_ROCE_SP_HSI_VERSION_MAJOR 1
#define HWRM_ROCE_SP_HSI_VERSION_MINOR 8
#define HWRM_ROCE_SP_HSI_VERSION_UPDATE 2
/*
* Request types
*/
#define HWRM_VER_GET (UINT32_C(0x0))
#define HWRM_FUNC_BUF_UNRGTR (UINT32_C(0xe))
#define HWRM_FUNC_VF_CFG (UINT32_C(0xf))
/* Reserved for future use */
#define RESERVED1 (UINT32_C(0x10))
#define HWRM_FUNC_RESET (UINT32_C(0x11))
#define HWRM_FUNC_GETFID (UINT32_C(0x12))
#define HWRM_FUNC_VF_ALLOC (UINT32_C(0x13))
#define HWRM_FUNC_VF_FREE (UINT32_C(0x14))
#define HWRM_FUNC_QCAPS (UINT32_C(0x15))
#define HWRM_FUNC_QCFG (UINT32_C(0x16))
#define HWRM_FUNC_CFG (UINT32_C(0x17))
#define HWRM_FUNC_QSTATS (UINT32_C(0x18))
#define HWRM_FUNC_CLR_STATS (UINT32_C(0x19))
#define HWRM_FUNC_DRV_UNRGTR (UINT32_C(0x1a))
#define HWRM_FUNC_VF_RESC_FREE (UINT32_C(0x1b))
#define HWRM_FUNC_VF_VNIC_IDS_QUERY (UINT32_C(0x1c))
#define HWRM_FUNC_DRV_RGTR (UINT32_C(0x1d))
#define HWRM_FUNC_DRV_QVER (UINT32_C(0x1e))
#define HWRM_FUNC_BUF_RGTR (UINT32_C(0x1f))
#define HWRM_PORT_PHY_CFG (UINT32_C(0x20))
#define HWRM_PORT_MAC_CFG (UINT32_C(0x21))
#define HWRM_PORT_QSTATS (UINT32_C(0x23))
#define HWRM_PORT_LPBK_QSTATS (UINT32_C(0x24))
#define HWRM_PORT_CLR_STATS (UINT32_C(0x25))
#define HWRM_PORT_PHY_QCFG (UINT32_C(0x27))
#define HWRM_PORT_MAC_QCFG (UINT32_C(0x28))
#define HWRM_PORT_PHY_QCAPS (UINT32_C(0x2a))
#define HWRM_PORT_LED_CFG (UINT32_C(0x2d))
#define HWRM_PORT_LED_QCFG (UINT32_C(0x2e))
#define HWRM_PORT_LED_QCAPS (UINT32_C(0x2f))
#define HWRM_QUEUE_QPORTCFG (UINT32_C(0x30))
#define HWRM_QUEUE_QCFG (UINT32_C(0x31))
#define HWRM_QUEUE_CFG (UINT32_C(0x32))
#define HWRM_FUNC_VLAN_CFG (UINT32_C(0x33))
#define HWRM_FUNC_VLAN_QCFG (UINT32_C(0x34))
#define HWRM_QUEUE_PFCENABLE_QCFG (UINT32_C(0x35))
#define HWRM_QUEUE_PFCENABLE_CFG (UINT32_C(0x36))
#define HWRM_QUEUE_PRI2COS_QCFG (UINT32_C(0x37))
#define HWRM_QUEUE_PRI2COS_CFG (UINT32_C(0x38))
#define HWRM_QUEUE_COS2BW_QCFG (UINT32_C(0x39))
#define HWRM_QUEUE_COS2BW_CFG (UINT32_C(0x3a))
#define HWRM_VNIC_ALLOC (UINT32_C(0x40))
#define HWRM_VNIC_ALLOC (UINT32_C(0x40))
#define HWRM_VNIC_FREE (UINT32_C(0x41))
#define HWRM_VNIC_CFG (UINT32_C(0x42))
#define HWRM_VNIC_QCFG (UINT32_C(0x43))
#define HWRM_VNIC_TPA_CFG (UINT32_C(0x44))
#define HWRM_VNIC_RSS_CFG (UINT32_C(0x46))
#define HWRM_VNIC_RSS_QCFG (UINT32_C(0x47))
#define HWRM_VNIC_PLCMODES_CFG (UINT32_C(0x48))
#define HWRM_VNIC_PLCMODES_QCFG (UINT32_C(0x49))
#define HWRM_VNIC_QCAPS (UINT32_C(0x4a))
#define HWRM_RING_ALLOC (UINT32_C(0x50))
#define HWRM_RING_FREE (UINT32_C(0x51))
#define HWRM_RING_CMPL_RING_QAGGINT_PARAMS (UINT32_C(0x52))
#define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS (UINT32_C(0x53))
#define HWRM_RING_RESET (UINT32_C(0x5e))
#define HWRM_RING_GRP_ALLOC (UINT32_C(0x60))
#define HWRM_RING_GRP_FREE (UINT32_C(0x61))
#define HWRM_VNIC_RSS_COS_LB_CTX_ALLOC (UINT32_C(0x70))
#define HWRM_VNIC_RSS_COS_LB_CTX_FREE (UINT32_C(0x71))
#define HWRM_CFA_L2_FILTER_ALLOC (UINT32_C(0x90))
#define HWRM_CFA_L2_FILTER_FREE (UINT32_C(0x91))
#define HWRM_CFA_L2_FILTER_CFG (UINT32_C(0x92))
#define HWRM_CFA_L2_SET_RX_MASK (UINT32_C(0x93))
/* Reserved for future use */
#define HWRM_CFA_VLAN_ANTISPOOF_CFG (UINT32_C(0x94))
#define HWRM_CFA_TUNNEL_FILTER_ALLOC (UINT32_C(0x95))
#define HWRM_CFA_TUNNEL_FILTER_FREE (UINT32_C(0x96))
#define HWRM_CFA_NTUPLE_FILTER_ALLOC (UINT32_C(0x99))
#define HWRM_CFA_NTUPLE_FILTER_FREE (UINT32_C(0x9a))
#define HWRM_CFA_NTUPLE_FILTER_CFG (UINT32_C(0x9b))
#define HWRM_CFA_EM_FLOW_ALLOC (UINT32_C(0x9c))
#define HWRM_CFA_EM_FLOW_FREE (UINT32_C(0x9d))
#define HWRM_CFA_EM_FLOW_CFG (UINT32_C(0x9e))
#define HWRM_TUNNEL_DST_PORT_QUERY (UINT32_C(0xa0))
#define HWRM_TUNNEL_DST_PORT_ALLOC (UINT32_C(0xa1))
#define HWRM_TUNNEL_DST_PORT_FREE (UINT32_C(0xa2))
#define HWRM_STAT_CTX_ALLOC (UINT32_C(0xb0))
#define HWRM_STAT_CTX_FREE (UINT32_C(0xb1))
#define HWRM_STAT_CTX_QUERY (UINT32_C(0xb2))
#define HWRM_STAT_CTX_CLR_STATS (UINT32_C(0xb3))
#define HWRM_FW_RESET (UINT32_C(0xc0))
#define HWRM_FW_QSTATUS (UINT32_C(0xc1))
#define HWRM_EXEC_FWD_RESP (UINT32_C(0xd0))
#define HWRM_REJECT_FWD_RESP (UINT32_C(0xd1))
#define HWRM_FWD_RESP (UINT32_C(0xd2))
#define HWRM_FWD_ASYNC_EVENT_CMPL (UINT32_C(0xd3))
#define HWRM_TEMP_MONITOR_QUERY (UINT32_C(0xe0))
#define HWRM_WOL_FILTER_ALLOC (UINT32_C(0xf0))
#define HWRM_WOL_FILTER_FREE (UINT32_C(0xf1))
#define HWRM_WOL_FILTER_QCFG (UINT32_C(0xf2))
#define HWRM_WOL_REASON_QCFG (UINT32_C(0xf3))
#define HWRM_DBG_DUMP (UINT32_C(0xff14))
#define HWRM_NVM_VALIDATE_OPTION (UINT32_C(0xffef))
#define HWRM_NVM_FLUSH (UINT32_C(0xfff0))
#define HWRM_NVM_GET_VARIABLE (UINT32_C(0xfff1))
#define HWRM_NVM_SET_VARIABLE (UINT32_C(0xfff2))
#define HWRM_NVM_INSTALL_UPDATE (UINT32_C(0xfff3))
#define HWRM_NVM_MODIFY (UINT32_C(0xfff4))
#define HWRM_NVM_VERIFY_UPDATE (UINT32_C(0xfff5))
#define HWRM_NVM_GET_DEV_INFO (UINT32_C(0xfff6))
#define HWRM_NVM_ERASE_DIR_ENTRY (UINT32_C(0xfff7))
#define HWRM_NVM_MOD_DIR_ENTRY (UINT32_C(0xfff8))
#define HWRM_NVM_FIND_DIR_ENTRY (UINT32_C(0xfff9))
#define HWRM_NVM_GET_DIR_ENTRIES (UINT32_C(0xfffa))
#define HWRM_NVM_GET_DIR_INFO (UINT32_C(0xfffb))
#define HWRM_NVM_RAW_DUMP (UINT32_C(0xfffc))
#define HWRM_NVM_READ (UINT32_C(0xfffd))
#define HWRM_NVM_WRITE (UINT32_C(0xfffe))
#define HWRM_NVM_RAW_WRITE_BLK (UINT32_C(0xffff))
/*
* Note: The Host Software Interface (HSI) and Hardware Resource Manager (HWRM)
* specification describes the data structures used in Ethernet packet or RDMA
* message data transfers as well as an abstract interface for managing Ethernet
* NIC hardware resources.
*/
/* Ethernet Data path Host Structures */
/*
* Description: The following three sections document the host structures used
* between device and software drivers for communicating Ethernet packets.
*/
/* BD Ring Structures */
/*
* Description: This structure is used to inform the NIC of a location for and
* an aggregation buffer that will be used for packet data that is received. An
* aggregation buffer creates a different kind of completion operation for a
* packet where a variable number of BDs may be used to place the packet in the
* host. RX Rings that have aggregation buffers are known as aggregation rings
* and must contain only aggregation buffers.
*/
/* Short TX BD (16 bytes) */
struct tx_bd_short {
uint16_t flags_type;
/*
* All bits in this field must be valid on the first BD of a
* packet. Only the packet_end bit must be valid for the
* remaining BDs of a packet.
*/
/* This value identifies the type of buffer descriptor. */
#define TX_BD_SHORT_TYPE_MASK UINT32_C(0x3f)
#define TX_BD_SHORT_TYPE_SFT 0
/*
* Indicates that this BD is 16B long and is
* used for normal L2 packet transmission.
*/
#define TX_BD_SHORT_TYPE_TX_BD_SHORT UINT32_C(0x0)
/*
* If set to 1, the packet ends with the data in the buffer
* pointed to by this descriptor. This flag must be valid on
* every BD.
*/
#define TX_BD_SHORT_FLAGS_PACKET_END UINT32_C(0x40)
/*
* If set to 1, the device will not generate a completion for
* this transmit packet unless there is an error in it's
* processing. If this bit is set to 0, then the packet will be
* completed normally. This bit must be valid only on the first
* BD of a packet.
*/
#define TX_BD_SHORT_FLAGS_NO_CMPL UINT32_C(0x80)
/*
* This value indicates how many 16B BD locations are consumed
* in the ring by this packet. A value of 1 indicates that this
* BD is the only BD (and that the it is a short BD). A value of
* 3 indicates either 3 short BDs or 1 long BD and one short BD
* in the packet. A value of 0 indicates that there are 32 BD
* locations in the packet (the maximum). This field is valid
* only on the first BD of a packet.
*/
#define TX_BD_SHORT_FLAGS_BD_CNT_MASK UINT32_C(0x1f00)
#define TX_BD_SHORT_FLAGS_BD_CNT_SFT 8
/*
* This value is a hint for the length of the entire packet. It
* is used by the chip to optimize internal processing. The
* packet will be dropped if the hint is too short. This field
* is valid only on the first BD of a packet.
*/
#define TX_BD_SHORT_FLAGS_LHINT_MASK UINT32_C(0x6000)
#define TX_BD_SHORT_FLAGS_LHINT_SFT 13
/* indicates packet length < 512B */
#define TX_BD_SHORT_FLAGS_LHINT_LT512 (UINT32_C(0x0) << 13)
/* indicates 512 <= packet length < 1KB */
#define TX_BD_SHORT_FLAGS_LHINT_LT1K (UINT32_C(0x1) << 13)
/* indicates 1KB <= packet length < 2KB */
#define TX_BD_SHORT_FLAGS_LHINT_LT2K (UINT32_C(0x2) << 13)
/* indicates packet length >= 2KB */
#define TX_BD_SHORT_FLAGS_LHINT_GTE2K (UINT32_C(0x3) << 13)
#define TX_BD_SHORT_FLAGS_LHINT_LAST \
TX_BD_SHORT_FLAGS_LHINT_GTE2K
/*
* If set to 1, the device immediately updates the Send Consumer
* Index after the buffer associated with this descriptor has
* been transferred via DMA to NIC memory from host memory. An
* interrupt may or may not be generated according to the state
* of the interrupt avoidance mechanisms. If this bit is set to
* 0, then the Consumer Index is only updated as soon as one of
* the host interrupt coalescing conditions has been met. This
* bit must be valid on the first BD of a packet.
*/
#define TX_BD_SHORT_FLAGS_COAL_NOW UINT32_C(0x8000)
/*
* All bits in this field must be valid on the first BD of a
* packet. Only the packet_end bit must be valid for the
* remaining BDs of a packet.
*/
#define TX_BD_SHORT_FLAGS_MASK UINT32_C(0xffc0)
#define TX_BD_SHORT_FLAGS_SFT 6
uint16_t len;
/*
* This is the length of the host physical buffer this BD
* describes in bytes. This field must be valid on all BDs of a
* packet.
*/
uint32_t opaque;
/*
* The opaque data field is pass through to the completion and
* can be used for any data that the driver wants to associate
* with the transmit BD. This field must be valid on the first
* BD of a packet.
*/
uint64_t addr;
/*
* This is the host physical address for the portion of the
* packet described by this TX BD. This value must be valid on
* all BDs of a packet.
*/
} __attribute__((packed));
/* Long TX BD (32 bytes split to 2 16-byte struct) */
struct tx_bd_long {
uint16_t flags_type;
/*
* All bits in this field must be valid on the first BD of a
* packet. Only the packet_end bit must be valid for the
* remaining BDs of a packet.
*/
/* This value identifies the type of buffer descriptor. */
#define TX_BD_LONG_TYPE_MASK UINT32_C(0x3f)
#define TX_BD_LONG_TYPE_SFT 0
/*
* Indicates that this BD is 32B long and is
* used for normal L2 packet transmission.
*/
#define TX_BD_LONG_TYPE_TX_BD_LONG UINT32_C(0x10)
/*
* If set to 1, the packet ends with the data in the buffer
* pointed to by this descriptor. This flag must be valid on
* every BD.
*/
#define TX_BD_LONG_FLAGS_PACKET_END UINT32_C(0x40)
/*
* If set to 1, the device will not generate a completion for
* this transmit packet unless there is an error in it's
* processing. If this bit is set to 0, then the packet will be
* completed normally. This bit must be valid only on the first
* BD of a packet.
*/
#define TX_BD_LONG_FLAGS_NO_CMPL UINT32_C(0x80)
/*
* This value indicates how many 16B BD locations are consumed
* in the ring by this packet. A value of 1 indicates that this
* BD is the only BD (and that the it is a short BD). A value of
* 3 indicates either 3 short BDs or 1 long BD and one short BD
* in the packet. A value of 0 indicates that there are 32 BD
* locations in the packet (the maximum). This field is valid
* only on the first BD of a packet.
*/
#define TX_BD_LONG_FLAGS_BD_CNT_MASK UINT32_C(0x1f00)
#define TX_BD_LONG_FLAGS_BD_CNT_SFT 8
/*
* This value is a hint for the length of the entire packet. It
* is used by the chip to optimize internal processing. The
* packet will be dropped if the hint is too short. This field
* is valid only on the first BD of a packet.
*/
#define TX_BD_LONG_FLAGS_LHINT_MASK UINT32_C(0x6000)
#define TX_BD_LONG_FLAGS_LHINT_SFT 13
/* indicates packet length < 512B */
#define TX_BD_LONG_FLAGS_LHINT_LT512 (UINT32_C(0x0) << 13)
/* indicates 512 <= packet length < 1KB */
#define TX_BD_LONG_FLAGS_LHINT_LT1K (UINT32_C(0x1) << 13)
/* indicates 1KB <= packet length < 2KB */
#define TX_BD_LONG_FLAGS_LHINT_LT2K (UINT32_C(0x2) << 13)
/* indicates packet length >= 2KB */
#define TX_BD_LONG_FLAGS_LHINT_GTE2K (UINT32_C(0x3) << 13)
#define TX_BD_LONG_FLAGS_LHINT_LAST \
TX_BD_LONG_FLAGS_LHINT_GTE2K
/*
* If set to 1, the device immediately updates the Send Consumer
* Index after the buffer associated with this descriptor has
* been transferred via DMA to NIC memory from host memory. An
* interrupt may or may not be generated according to the state
* of the interrupt avoidance mechanisms. If this bit is set to
* 0, then the Consumer Index is only updated as soon as one of
* the host interrupt coalescing conditions has been met. This
* bit must be valid on the first BD of a packet.
*/
#define TX_BD_LONG_FLAGS_COAL_NOW UINT32_C(0x8000)
/*
* All bits in this field must be valid on the first BD of a
* packet. Only the packet_end bit must be valid for the
* remaining BDs of a packet.
*/
#define TX_BD_LONG_FLAGS_MASK UINT32_C(0xffc0)
#define TX_BD_LONG_FLAGS_SFT 6
uint16_t len;
/*
* This is the length of the host physical buffer this BD
* describes in bytes. This field must be valid on all BDs of a
* packet.
*/
uint32_t opaque;
/*
* The opaque data field is pass through to the completion and
* can be used for any data that the driver wants to associate
* with the transmit BD. This field must be valid on the first
* BD of a packet.
*/
uint64_t addr;
/*
* This is the host physical address for the portion of the
* packet described by this TX BD. This value must be valid on
* all BDs of a packet.
*/
} __attribute__((packed));
/* last 16 bytes of Long TX BD */
struct tx_bd_long_hi {
uint16_t lflags;
/*
* All bits in this field must be valid on the first BD of a
* packet. Their value on other BDs of the packet will be
* ignored.
*/
/*
* If set to 1, the controller replaces the TCP/UPD checksum
* fields of normal TCP/UPD checksum, or the inner TCP/UDP
* checksum field of the encapsulated TCP/UDP packets with the
* hardware calculated TCP/UDP checksum for the packet
* associated with this descriptor. The flag is ignored if the
* LSO flag is set. This bit must be valid on the first BD of a
* packet.
*/
#define TX_BD_LONG_LFLAGS_TCP_UDP_CHKSUM UINT32_C(0x1)
/*
* If set to 1, the controller replaces the IP checksum of the
* normal packets, or the inner IP checksum of the encapsulated
* packets with the hardware calculated IP checksum for the
* packet associated with this descriptor. This bit must be
* valid on the first BD of a packet.
*/
#define TX_BD_LONG_LFLAGS_IP_CHKSUM UINT32_C(0x2)
/*
* If set to 1, the controller will not append an Ethernet CRC
* to the end of the frame. This bit must be valid on the first
* BD of a packet. Packet must be 64B or longer when this flag
* is set. It is not useful to use this bit with any form of TX
* offload such as CSO or LSO. The intent is that the packet
* from the host already has a valid Ethernet CRC on the packet.
*/
#define TX_BD_LONG_LFLAGS_NOCRC UINT32_C(0x4)
/*
* If set to 1, the device will record the time at which the
* packet was actually transmitted at the TX MAC. This bit must
* be valid on the first BD of a packet.
*/
#define TX_BD_LONG_LFLAGS_STAMP UINT32_C(0x8)
/*
* If set to 1, The controller replaces the tunnel IP checksum
* field with hardware calculated IP checksum for the IP header
* of the packet associated with this descriptor. For outer UDP
* checksum, global outer UDP checksum TE_NIC register needs to
* be enabled. If the global outer UDP checksum TE_NIC register
* bit is set, outer UDP checksum will be calculated for the
* following cases: 1. Packets with tcp_udp_chksum flag set to
* offload checksum for inner packet AND the inner packet is
* TCP/UDP. If the inner packet is ICMP for example (non-
* TCP/UDP), even if the tcp_udp_chksum is set, the outer UDP
* checksum will not be calculated. 2. Packets with lso flag set
* which implies inner TCP checksum calculation as part of LSO
* operation.
*/
#define TX_BD_LONG_LFLAGS_T_IP_CHKSUM UINT32_C(0x10)
/*
* If set to 1, the device will treat this packet with LSO(Large
* Send Offload) processing for both normal or encapsulated
* packets, which is a form of TCP segmentation. When this bit
* is 1, the hdr_size and mss fields must be valid. The driver
* doesn't need to set t_ip_chksum, ip_chksum, and
* tcp_udp_chksum flags since the controller will replace the
* appropriate checksum fields for segmented packets. When this
* bit is 1, the hdr_size and mss fields must be valid.
*/
#define TX_BD_LONG_LFLAGS_LSO UINT32_C(0x20)
/*
* If set to zero when LSO is '1', then the IPID will be treated
* as a 16b number and will be wrapped if it exceeds a value of
* 0xffff. If set to one when LSO is '1', then the IPID will be
* treated as a 15b number and will be wrapped if it exceeds a
* value 0f 0x7fff.
*/
#define TX_BD_LONG_LFLAGS_IPID_FMT UINT32_C(0x40)
/*
* If set to zero when LSO is '1', then the IPID of the tunnel
* IP header will not be modified during LSO operations. If set
* to one when LSO is '1', then the IPID of the tunnel IP header
* will be incremented for each subsequent segment of an LSO
* operation. The flag is ignored if the LSO packet is a normal
* (non-tunneled) TCP packet.
*/
#define TX_BD_LONG_LFLAGS_T_IPID UINT32_C(0x80)
/*
* If set to '1', then the RoCE ICRC will be appended to the
* packet. Packet must be a valid RoCE format packet.
*/
#define TX_BD_LONG_LFLAGS_ROCE_CRC UINT32_C(0x100)
/*
* If set to '1', then the FCoE CRC will be appended to the
* packet. Packet must be a valid FCoE format packet.
*/
#define TX_BD_LONG_LFLAGS_FCOE_CRC UINT32_C(0x200)
uint16_t hdr_size;
/*
* When LSO is '1', this field must contain the offset of the
* TCP payload from the beginning of the packet in as 16b words.
* In case of encapsulated/tunneling packet, this field contains
* the offset of the inner TCP payload from beginning of the
* packet as 16-bit words. This value must be valid on the first
* BD of a packet.
*/
#define TX_BD_LONG_HDR_SIZE_MASK UINT32_C(0x1ff)
#define TX_BD_LONG_HDR_SIZE_SFT 0
uint32_t mss;
/*
* This is the MSS value that will be used to do the LSO
* processing. The value is the length in bytes of the TCP
* payload for each segment generated by the LSO operation. This
* value must be valid on the first BD of a packet.
*/
#define TX_BD_LONG_MSS_MASK UINT32_C(0x7fff)
#define TX_BD_LONG_MSS_SFT 0
uint16_t unused_2;
uint16_t cfa_action;
/*
* This value selects a CFA action to perform on the packet. Set
* this value to zero if no CFA action is desired. This value
* must be valid on the first BD of a packet.
*/
uint32_t cfa_meta;
/*
* This value is action meta-data that defines CFA edit
* operations that are done in addition to any action editing.
*/
/* When key=1, This is the VLAN tag VID value. */
#define TX_BD_LONG_CFA_META_VLAN_VID_MASK UINT32_C(0xfff)
#define TX_BD_LONG_CFA_META_VLAN_VID_SFT 0
/* When key=1, This is the VLAN tag DE value. */
#define TX_BD_LONG_CFA_META_VLAN_DE UINT32_C(0x1000)
/* When key=1, This is the VLAN tag PRI value. */
#define TX_BD_LONG_CFA_META_VLAN_PRI_MASK UINT32_C(0xe000)
#define TX_BD_LONG_CFA_META_VLAN_PRI_SFT 13
/* When key=1, This is the VLAN tag TPID select value. */
#define TX_BD_LONG_CFA_META_VLAN_TPID_MASK UINT32_C(0x70000)
#define TX_BD_LONG_CFA_META_VLAN_TPID_SFT 16
/* 0x88a8 */
#define TX_BD_LONG_CFA_META_VLAN_TPID_TPID88A8 (UINT32_C(0x0) << 16)
/* 0x8100 */
#define TX_BD_LONG_CFA_META_VLAN_TPID_TPID8100 (UINT32_C(0x1) << 16)
/* 0x9100 */
#define TX_BD_LONG_CFA_META_VLAN_TPID_TPID9100 (UINT32_C(0x2) << 16)
/* 0x9200 */
#define TX_BD_LONG_CFA_META_VLAN_TPID_TPID9200 (UINT32_C(0x3) << 16)
/* 0x9300 */
#define TX_BD_LONG_CFA_META_VLAN_TPID_TPID9300 (UINT32_C(0x4) << 16)
/* Value programmed in CFA VLANTPID register. */
#define TX_BD_LONG_CFA_META_VLAN_TPID_TPIDCFG (UINT32_C(0x5) << 16)
#define TX_BD_LONG_CFA_META_VLAN_TPID_LAST \
TX_BD_LONG_CFA_META_VLAN_TPID_TPIDCFG
/* When key=1, This is the VLAN tag TPID select value. */
#define TX_BD_LONG_CFA_META_VLAN_RESERVED_MASK UINT32_C(0xff80000)
#define TX_BD_LONG_CFA_META_VLAN_RESERVED_SFT 19
/*
* This field identifies the type of edit to be performed on the
* packet. This value must be valid on the first BD of a packet.
*/
#define TX_BD_LONG_CFA_META_KEY_MASK UINT32_C(0xf0000000)
#define TX_BD_LONG_CFA_META_KEY_SFT 28
/* No editing */
#define TX_BD_LONG_CFA_META_KEY_NONE (UINT32_C(0x0) << 28)
/*
* - meta[17:16] - TPID select value (0 =
* 0x8100). - meta[15:12] - PRI/DE value. -
* meta[11:0] - VID value.
*/
#define TX_BD_LONG_CFA_META_KEY_VLAN_TAG (UINT32_C(0x1) << 28)
#define TX_BD_LONG_CFA_META_KEY_LAST \
TX_BD_LONG_CFA_META_KEY_VLAN_TAG
} __attribute__((packed));
/* RX Producer Packet BD (16 bytes) */
struct rx_prod_pkt_bd {
uint16_t flags_type;
/* This value identifies the type of buffer descriptor. */
#define RX_PROD_PKT_BD_TYPE_MASK UINT32_C(0x3f)
#define RX_PROD_PKT_BD_TYPE_SFT 0
/*
* Indicates that this BD is 16B long and is an
* RX Producer (ie. empty) buffer descriptor.
*/
#define RX_PROD_PKT_BD_TYPE_RX_PROD_PKT UINT32_C(0x4)
/*
* If set to 1, the packet will be placed at the address plus
* 2B. The 2 Bytes of padding will be written as zero.
*/
/*
* This is intended to be used when the host buffer is cache-
* line aligned to produce packets that are easy to parse in
* host memory while still allowing writes to be cache line
* aligned.
*/
#define RX_PROD_PKT_BD_FLAGS_SOP_PAD UINT32_C(0x40)
/*
* If set to 1, the packet write will be padded out to the
* nearest cache-line with zero value padding.
*/
/*
* If receive buffers start/end on cache-line boundaries, this
* feature will ensure that all data writes on the PCI bus
* start/end on cache line boundaries.
*/
#define RX_PROD_PKT_BD_FLAGS_EOP_PAD UINT32_C(0x80)
/*
* This value is the number of additional buffers in the ring
* that describe the buffer space to be consumed for the this
* packet. If the value is zero, then the packet must fit within
* the space described by this BD. If this value is 1 or more,
* it indicates how many additional "buffer" BDs are in the ring
* immediately following this BD to be used for the same network
* packet. Even if the packet to be placed does not need all the
* additional buffers, they will be consumed anyway.
*/
#define RX_PROD_PKT_BD_FLAGS_BUFFERS_MASK UINT32_C(0x300)
#define RX_PROD_PKT_BD_FLAGS_BUFFERS_SFT 8
#define RX_PROD_PKT_BD_FLAGS_MASK UINT32_C(0xffc0)
#define RX_PROD_PKT_BD_FLAGS_SFT 6
uint16_t len;
/*
* This is the length in Bytes of the host physical buffer where
* data for the packet may be placed in host memory.
*/
/*
* While this is a Byte resolution value, it is often
* advantageous to ensure that the buffers provided end on a
* host cache line.
*/
uint32_t opaque;
/*
* The opaque data field is pass through to the completion and
* can be used for any data that the driver wants to associate
* with this receive buffer set.
*/
uint64_t addr;
/*
* This is the host physical address where data for the packet
* may by placed in host memory.
*/
/*
* While this is a Byte resolution value, it is often
* advantageous to ensure that the buffers provide start on a
* host cache line.
*/
} __attribute__((packed));
/* Completion Ring Structures */
/* Note: This structure is used by the HWRM to communicate HWRM Error. */
/* Base Completion Record (16 bytes) */
struct cmpl_base {
uint16_t type;
/* unused is 10 b */
/*
* This field indicates the exact type of the completion. By
* convention, the LSB identifies the length of the record in
* 16B units. Even values indicate 16B records. Odd values
* indicate 32B records.
*/
#define CMPL_BASE_TYPE_MASK UINT32_C(0x3f)
#define CMPL_BASE_TYPE_SFT 0
/* TX L2 completion: Completion of TX packet. Length = 16B */
#define CMPL_BASE_TYPE_TX_L2 UINT32_C(0x0)
/*
* RX L2 completion: Completion of and L2 RX
* packet. Length = 32B
*/
#define CMPL_BASE_TYPE_RX_L2 UINT32_C(0x11)
/*
* RX Aggregation Buffer completion : Completion
* of an L2 aggregation buffer in support of
* TPA, HDS, or Jumbo packet completion. Length
* = 16B
*/
#define CMPL_BASE_TYPE_RX_AGG UINT32_C(0x12)
/*
* RX L2 TPA Start Completion: Completion at the
* beginning of a TPA operation. Length = 32B
*/
#define CMPL_BASE_TYPE_RX_TPA_START UINT32_C(0x13)
/*
* RX L2 TPA End Completion: Completion at the
* end of a TPA operation. Length = 32B
*/
#define CMPL_BASE_TYPE_RX_TPA_END UINT32_C(0x15)
/*
* Statistics Ejection Completion: Completion of
* statistics data ejection buffer. Length = 16B
*/
#define CMPL_BASE_TYPE_STAT_EJECT UINT32_C(0x1a)
/* HWRM Command Completion: Completion of an HWRM command. */
#define CMPL_BASE_TYPE_HWRM_DONE UINT32_C(0x20)
/* Forwarded HWRM Request */
#define CMPL_BASE_TYPE_HWRM_FWD_REQ UINT32_C(0x22)
/* Forwarded HWRM Response */
#define CMPL_BASE_TYPE_HWRM_FWD_RESP UINT32_C(0x24)
/* HWRM Asynchronous Event Information */
#define CMPL_BASE_TYPE_HWRM_ASYNC_EVENT UINT32_C(0x2e)
/* CQ Notification */
#define CMPL_BASE_TYPE_CQ_NOTIFICATION UINT32_C(0x30)
/* SRQ Threshold Event */
#define CMPL_BASE_TYPE_SRQ_EVENT UINT32_C(0x32)
/* DBQ Threshold Event */
#define CMPL_BASE_TYPE_DBQ_EVENT UINT32_C(0x34)
/* QP Async Notification */
#define CMPL_BASE_TYPE_QP_EVENT UINT32_C(0x38)
/* Function Async Notification */
#define CMPL_BASE_TYPE_FUNC_EVENT UINT32_C(0x3a)
/* unused is 10 b */
uint16_t info1;
/* info1 is 16 b */
uint32_t info2;
/* info2 is 32 b */
uint32_t info3_v;
/* info3 is 31 b */
/*
* This value is written by the NIC such that it will be
* different for each pass through the completion queue. The
* even passes will write 1. The odd passes will write 0.
*/
#define CMPL_BASE_V UINT32_C(0x1)
/* info3 is 31 b */
#define CMPL_BASE_INFO3_MASK UINT32_C(0xfffffffe)
#define CMPL_BASE_INFO3_SFT 1
uint32_t info4;
/* info4 is 32 b */
} __attribute__((packed));
/* TX Completion Record (16 bytes) */
struct tx_cmpl {
uint16_t flags_type;
/*
* This field indicates the exact type of the completion. By
* convention, the LSB identifies the length of the record in
* 16B units. Even values indicate 16B records. Odd values
* indicate 32B records.
*/
#define TX_CMPL_TYPE_MASK UINT32_C(0x3f)
#define TX_CMPL_TYPE_SFT 0
/* TX L2 completion: Completion of TX packet. Length = 16B */
#define TX_CMPL_TYPE_TX_L2 UINT32_C(0x0)
/*
* When this bit is '1', it indicates a packet that has an error
* of some type. Type of error is indicated in error_flags.
*/
#define TX_CMPL_FLAGS_ERROR UINT32_C(0x40)
/*
* When this bit is '1', it indicates that the packet completed
* was transmitted using the push acceleration data provided by
* the driver. When this bit is '0', it indicates that the
* packet had not push acceleration data written or was executed
* as a normal packet even though push data was provided.
*/
#define TX_CMPL_FLAGS_PUSH UINT32_C(0x80)
#define TX_CMPL_FLAGS_MASK UINT32_C(0xffc0)
#define TX_CMPL_FLAGS_SFT 6
uint16_t unused_0;
/* unused1 is 16 b */
uint32_t opaque;
/*
* This is a copy of the opaque field from the first TX BD of
* this transmitted packet.
*/
uint16_t errors_v;
/*
* This value is written by the NIC such that it will be
* different for each pass through the completion queue. The
* even passes will write 1. The odd passes will write 0.
*/
#define TX_CMPL_V UINT32_C(0x1)
/*
* This error indicates that there was some sort of problem with
* the BDs for the packet.
*/
#define TX_CMPL_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe)
#define TX_CMPL_ERRORS_BUFFER_ERROR_SFT 1
/* No error */
#define TX_CMPL_ERRORS_BUFFER_ERROR_NO_ERROR (UINT32_C(0x0) << 1)
/* Bad Format: BDs were not formatted correctly. */
#define TX_CMPL_ERRORS_BUFFER_ERROR_BAD_FMT (UINT32_C(0x2) << 1)
#define TX_CMPL_ERRORS_BUFFER_ERROR_LAST \
TX_CMPL_ERRORS_BUFFER_ERROR_BAD_FMT
/*
* When this bit is '1', it indicates that the length of the
* packet was zero. No packet was transmitted.
*/
#define TX_CMPL_ERRORS_ZERO_LENGTH_PKT UINT32_C(0x10)
/*
* When this bit is '1', it indicates that the packet was longer
* than the programmed limit in TDI. No packet was transmitted.
*/
#define TX_CMPL_ERRORS_EXCESSIVE_BD_LENGTH UINT32_C(0x20)
/*
* When this bit is '1', it indicates that one or more of the
* BDs associated with this packet generated a PCI error. This
* probably means the address was not valid.
*/
#define TX_CMPL_ERRORS_DMA_ERROR UINT32_C(0x40)
/*
* When this bit is '1', it indicates that the packet was longer
* than indicated by the hint. No packet was transmitted.
*/
#define TX_CMPL_ERRORS_HINT_TOO_SHORT UINT32_C(0x80)
/*
* When this bit is '1', it indicates that the packet was
* dropped due to Poison TLP error on one or more of the TLPs in
* the PXP completion.
*/
#define TX_CMPL_ERRORS_POISON_TLP_ERROR UINT32_C(0x100)
#define TX_CMPL_ERRORS_MASK UINT32_C(0xfffe)
#define TX_CMPL_ERRORS_SFT 1
uint16_t unused_1;
/* unused2 is 16 b */
uint32_t unused_2;
/* unused3 is 32 b */
} __attribute__((packed));
/* RX Packet Completion Record (32 bytes split to 2 16-byte struct) */
struct rx_pkt_cmpl {
uint16_t flags_type;
/*
* This field indicates the exact type of the completion. By
* convention, the LSB identifies the length of the record in
* 16B units. Even values indicate 16B records. Odd values
* indicate 32B records.
*/
#define RX_PKT_CMPL_TYPE_MASK UINT32_C(0x3f)
#define RX_PKT_CMPL_TYPE_SFT 0
/*
* RX L2 completion: Completion of and L2 RX
* packet. Length = 32B
*/
#define RX_PKT_CMPL_TYPE_RX_L2 UINT32_C(0x11)
/*
* When this bit is '1', it indicates a packet that has an error
* of some type. Type of error is indicated in error_flags.
*/
#define RX_PKT_CMPL_FLAGS_ERROR UINT32_C(0x40)
/* This field indicates how the packet was placed in the buffer. */
#define RX_PKT_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380)
#define RX_PKT_CMPL_FLAGS_PLACEMENT_SFT 7
/* Normal: Packet was placed using normal algorithm. */
#define RX_PKT_CMPL_FLAGS_PLACEMENT_NORMAL (UINT32_C(0x0) << 7)
/* Jumbo: Packet was placed using jumbo algorithm. */
#define RX_PKT_CMPL_FLAGS_PLACEMENT_JUMBO (UINT32_C(0x1) << 7)
/*
* Header/Data Separation: Packet was placed
* using Header/Data separation algorithm. The
* separation location is indicated by the itype
* field.
*/
#define RX_PKT_CMPL_FLAGS_PLACEMENT_HDS (UINT32_C(0x2) << 7)
#define RX_PKT_CMPL_FLAGS_PLACEMENT_LAST \
RX_PKT_CMPL_FLAGS_PLACEMENT_HDS
/* This bit is '1' if the RSS field in this completion is valid. */
#define RX_PKT_CMPL_FLAGS_RSS_VALID UINT32_C(0x400)
/* unused is 1 b */
#define RX_PKT_CMPL_FLAGS_UNUSED UINT32_C(0x800)
/*
* This value indicates what the inner packet determined for the
* packet was.
*/
#define RX_PKT_CMPL_FLAGS_ITYPE_MASK UINT32_C(0xf000)
#define RX_PKT_CMPL_FLAGS_ITYPE_SFT 12
/* Not Known: Indicates that the packet type was not known. */
#define RX_PKT_CMPL_FLAGS_ITYPE_NOT_KNOWN (UINT32_C(0x0) << 12)
/*
* IP Packet: Indicates that the packet was an
* IP packet, but further classification was not
* possible.
*/
#define RX_PKT_CMPL_FLAGS_ITYPE_IP (UINT32_C(0x1) << 12)
/*
* TCP Packet: Indicates that the packet was IP
* and TCP. This indicates that the
* payload_offset field is valid.
*/
#define RX_PKT_CMPL_FLAGS_ITYPE_TCP (UINT32_C(0x2) << 12)
/*
* UDP Packet: Indicates that the packet was IP
* and UDP. This indicates that the
* payload_offset field is valid.
*/
#define RX_PKT_CMPL_FLAGS_ITYPE_UDP (UINT32_C(0x3) << 12)
/*
* FCoE Packet: Indicates that the packet was
* recognized as a FCoE. This also indicates
* that the payload_offset field is valid.
*/
#define RX_PKT_CMPL_FLAGS_ITYPE_FCOE (UINT32_C(0x4) << 12)
/*
* RoCE Packet: Indicates that the packet was
* recognized as a RoCE. This also indicates
* that the payload_offset field is valid.
*/
#define RX_PKT_CMPL_FLAGS_ITYPE_ROCE (UINT32_C(0x5) << 12)
/*
* ICMP Packet: Indicates that the packet was
* recognized as ICMP. This indicates that the
* payload_offset field is valid.
*/
#define RX_PKT_CMPL_FLAGS_ITYPE_ICMP (UINT32_C(0x7) << 12)
/*
* PtP packet wo/timestamp: Indicates that the
* packet was recognized as a PtP packet.
*/
#define RX_PKT_CMPL_FLAGS_ITYPE_PTP_WO_TIMESTAMP (UINT32_C(0x8) << 12)
/*
* PtP packet w/timestamp: Indicates that the
* packet was recognized as a PtP packet and
* that a timestamp was taken for the packet.
*/
#define RX_PKT_CMPL_FLAGS_ITYPE_PTP_W_TIMESTAMP (UINT32_C(0x9) << 12)
#define RX_PKT_CMPL_FLAGS_ITYPE_LAST \
RX_PKT_CMPL_FLAGS_ITYPE_PTP_W_TIMESTAMP
#define RX_PKT_CMPL_FLAGS_MASK UINT32_C(0xffc0)
#define RX_PKT_CMPL_FLAGS_SFT 6
uint16_t len;
/*
* This is the length of the data for the packet stored in the
* buffer(s) identified by the opaque value. This includes the
* packet BD and any associated buffer BDs. This does not
* include the length of any data places in aggregation BDs.
*/
uint32_t opaque;
/*
* This is a copy of the opaque field from the RX BD this
* completion corresponds to.
*/
uint8_t agg_bufs_v1;
/* unused1 is 2 b */
/*
* This value is written by the NIC such that it will be
* different for each pass through the completion queue. The
* even passes will write 1. The odd passes will write 0.
*/
#define RX_PKT_CMPL_V1 UINT32_C(0x1)
/*
* This value is the number of aggregation buffers that follow
* this entry in the completion ring that are a part of this
* packet. If the value is zero, then the packet is completely
* contained in the buffer space provided for the packet in the
* RX ring.
*/
#define RX_PKT_CMPL_AGG_BUFS_MASK UINT32_C(0x3e)
#define RX_PKT_CMPL_AGG_BUFS_SFT 1
/* unused1 is 2 b */
uint8_t rss_hash_type;
/*
* This is the RSS hash type for the packet. The value is packed
* {tuple_extrac_op[1:0],rss_profile_id[4:0],tuple_extrac_op[2]}
* . The value of tuple_extrac_op provides the information about
* what fields the hash was computed on. * 0: The RSS hash was
* computed over source IP address, destination IP address,
* source port, and destination port of inner IP and TCP or UDP
* headers. Note: For non-tunneled packets, the packet headers
* are considered inner packet headers for the RSS hash
* computation purpose. * 1: The RSS hash was computed over
* source IP address and destination IP address of inner IP
* header. Note: For non-tunneled packets, the packet headers
* are considered inner packet headers for the RSS hash
* computation purpose. * 2: The RSS hash was computed over
* source IP address, destination IP address, source port, and
* destination port of IP and TCP or UDP headers of outer tunnel
* headers. Note: For non-tunneled packets, this value is not
* applicable. * 3: The RSS hash was computed over source IP
* address and destination IP address of IP header of outer
* tunnel headers. Note: For non-tunneled packets, this value is
* not applicable. Note that 4-tuples values listed above are
* applicable for layer 4 protocols supported and enabled for
* RSS in the hardware, HWRM firmware, and drivers. For example,
* if RSS hash is supported and enabled for TCP traffic only,
* then the values of tuple_extract_op corresponding to 4-tuples
* are only valid for TCP traffic.
*/
uint8_t payload_offset;
/*
* This value indicates the offset in bytes from the beginning
* of the packet where the inner payload starts. This value is
* valid for TCP, UDP, FCoE, and RoCE packets. A value of zero
* indicates that header is 256B into the packet.
*/
uint8_t unused_1;
/* unused2 is 8 b */
uint32_t rss_hash;
/*
* This value is the RSS hash value calculated for the packet
* based on the mode bits and key value in the VNIC.
*/
} __attribute__((packed));
/* last 16 bytes of RX Packet Completion Record */
struct rx_pkt_cmpl_hi {
uint32_t flags2;
/*
* This indicates that the ip checksum was calculated for the
* inner packet and that the ip_cs_error field indicates if
* there was an error.
*/
#define RX_PKT_CMPL_FLAGS2_IP_CS_CALC UINT32_C(0x1)
/*
* This indicates that the TCP, UDP or ICMP checksum was
* calculated for the inner packet and that the l4_cs_error
* field indicates if there was an error.
*/
#define RX_PKT_CMPL_FLAGS2_L4_CS_CALC UINT32_C(0x2)
/*
* This indicates that the ip checksum was calculated for the
* tunnel header and that the t_ip_cs_error field indicates if
* there was an error.
*/
#define RX_PKT_CMPL_FLAGS2_T_IP_CS_CALC UINT32_C(0x4)
/*
* This indicates that the UDP checksum was calculated for the
* tunnel packet and that the t_l4_cs_error field indicates if
* there was an error.
*/
#define RX_PKT_CMPL_FLAGS2_T_L4_CS_CALC UINT32_C(0x8)
/* This value indicates what format the metadata field is. */
#define RX_PKT_CMPL_FLAGS2_META_FORMAT_MASK UINT32_C(0xf0)
#define RX_PKT_CMPL_FLAGS2_META_FORMAT_SFT 4
/* No metadata informtaion. Value is zero. */
#define RX_PKT_CMPL_FLAGS2_META_FORMAT_NONE (UINT32_C(0x0) << 4)
/*
* The metadata field contains the VLAN tag and
* TPID value. - metadata[11:0] contains the
* vlan VID value. - metadata[12] contains the
* vlan DE value. - metadata[15:13] contains the
* vlan PRI value. - metadata[31:16] contains
* the vlan TPID value.
*/
#define RX_PKT_CMPL_FLAGS2_META_FORMAT_VLAN (UINT32_C(0x1) << 4)
#define RX_PKT_CMPL_FLAGS2_META_FORMAT_LAST \
RX_PKT_CMPL_FLAGS2_META_FORMAT_VLAN
/*
* This field indicates the IP type for the inner-most IP
* header. A value of '0' indicates IPv4. A value of '1'
* indicates IPv6. This value is only valid if itype indicates a
* packet with an IP header.
*/
#define RX_PKT_CMPL_FLAGS2_IP_TYPE UINT32_C(0x100)
uint32_t metadata;
/*
* This is data from the CFA block as indicated by the
* meta_format field.
*/
/* When meta_format=1, this value is the VLAN VID. */
#define RX_PKT_CMPL_METADATA_VID_MASK UINT32_C(0xfff)
#define RX_PKT_CMPL_METADATA_VID_SFT 0
/* When meta_format=1, this value is the VLAN DE. */
#define RX_PKT_CMPL_METADATA_DE UINT32_C(0x1000)
/* When meta_format=1, this value is the VLAN PRI. */
#define RX_PKT_CMPL_METADATA_PRI_MASK UINT32_C(0xe000)
#define RX_PKT_CMPL_METADATA_PRI_SFT 13
/* When meta_format=1, this value is the VLAN TPID. */
#define RX_PKT_CMPL_METADATA_TPID_MASK UINT32_C(0xffff0000)
#define RX_PKT_CMPL_METADATA_TPID_SFT 16
uint16_t errors_v2;
/*
* This value is written by the NIC such that it will be
* different for each pass through the completion queue. The
* even passes will write 1. The odd passes will write 0.
*/
#define RX_PKT_CMPL_V2 UINT32_C(0x1)
/*
* This error indicates that there was some sort of problem with
* the BDs for the packet that was found after part of the
* packet was already placed. The packet should be treated as
* invalid.
*/
#define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe)
#define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_SFT 1
/* No buffer error */
#define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_NO_BUFFER (UINT32_C(0x0) << 1)
/*
* Did Not Fit: Packet did not fit into packet
* buffer provided. For regular placement, this
* means the packet did not fit in the buffer
* provided. For HDS and jumbo placement, this
* means that the packet could not be placed
* into 7 physical buffers or less.
*/
#define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_DID_NOT_FIT \
(UINT32_C(0x1) << 1)
/*
* Not On Chip: All BDs needed for the packet
* were not on-chip when the packet arrived.
*/
#define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_NOT_ON_CHIP \
(UINT32_C(0x2) << 1)
/* Bad Format: BDs were not formatted correctly. */
#define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT \
(UINT32_C(0x3) << 1)
#define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_LAST \
RX_PKT_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT
/* This indicates that there was an error in the IP header checksum. */
#define RX_PKT_CMPL_ERRORS_IP_CS_ERROR UINT32_C(0x10)
/*
* This indicates that there was an error in the TCP, UDP or
* ICMP checksum.
*/
#define RX_PKT_CMPL_ERRORS_L4_CS_ERROR UINT32_C(0x20)
/*
* This indicates that there was an error in the tunnel IP
* header checksum.
*/
#define RX_PKT_CMPL_ERRORS_T_IP_CS_ERROR UINT32_C(0x40)
/*
* This indicates that there was an error in the tunnel UDP
* checksum.
*/
#define RX_PKT_CMPL_ERRORS_T_L4_CS_ERROR UINT32_C(0x80)
/*
* This indicates that there was a CRC error on either an FCoE
* or RoCE packet. The itype indicates the packet type.
*/
#define RX_PKT_CMPL_ERRORS_CRC_ERROR UINT32_C(0x100)
/*
* This indicates that there was an error in the tunnel portion
* of the packet when this field is non-zero.
*/
#define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_MASK UINT32_C(0xe00)
#define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_SFT 9
/*
* No additional error occurred on the tunnel
* portion of the packet of the packet does not
* have a tunnel.
*/
#define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_NO_ERROR (UINT32_C(0x0) << 9)
/*
* Indicates that IP header version does not
* match expectation from L2 Ethertype for IPv4
* and IPv6 in the tunnel header.
*/
#define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_VERSION \
(UINT32_C(0x1) << 9)
/*
* Indicates that header length is out of range
* in the tunnel header. Valid for IPv4.
*/
#define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_HDR_LEN \
(UINT32_C(0x2) << 9)
/*
* Indicates that the physical packet is shorter
* than that claimed by the PPPoE header length
* for a tunnel PPPoE packet.
*/
#define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_TUNNEL_TOTAL_ERROR \
(UINT32_C(0x3) << 9)
/*
* Indicates that physical packet is shorter
* than that claimed by the tunnel l3 header
* length. Valid for IPv4, or IPv6 tunnel packet
* packets.
*/
#define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_IP_TOTAL_ERROR \
(UINT32_C(0x4) << 9)
/*
* Indicates that the physical packet is shorter
* than that claimed by the tunnel UDP header
* length for a tunnel UDP packet that is not
* fragmented.
*/
#define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_UDP_TOTAL_ERROR \
(UINT32_C(0x5) << 9)
/*
* indicates that the IPv4 TTL or IPv6 hop limit
* check have failed (e.g. TTL = 0) in the
* tunnel header. Valid for IPv4, and IPv6.
*/
#define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_TTL \
(UINT32_C(0x6) << 9)
#define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_LAST \
RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_TTL
/*
* This indicates that there was an error in the inner portion
* of the packet when this field is non-zero.
*/
#define RX_PKT_CMPL_ERRORS_PKT_ERROR_MASK UINT32_C(0xf000)
#define RX_PKT_CMPL_ERRORS_PKT_ERROR_SFT 12
/*
* No additional error occurred on the tunnel
* portion of the packet of the packet does not
* have a tunnel.
*/
#define RX_PKT_CMPL_ERRORS_PKT_ERROR_NO_ERROR (UINT32_C(0x0) << 12)
/*
* Indicates that IP header version does not
* match expectation from L2 Ethertype for IPv4
* and IPv6 or that option other than VFT was
* parsed on FCoE packet.
*/
#define RX_PKT_CMPL_ERRORS_PKT_ERROR_L3_BAD_VERSION \
(UINT32_C(0x1) << 12)
/*
* indicates that header length is out of range.
* Valid for IPv4 and RoCE
*/
#define RX_PKT_CMPL_ERRORS_PKT_ERROR_L3_BAD_HDR_LEN \
(UINT32_C(0x2) << 12)
/*
* indicates that the IPv4 TTL or IPv6 hop limit
* check have failed (e.g. TTL = 0). Valid for
* IPv4, and IPv6
*/
#define RX_PKT_CMPL_ERRORS_PKT_ERROR_L3_BAD_TTL (UINT32_C(0x3) << 12)
/*
* Indicates that physical packet is shorter
* than that claimed by the l3 header length.
* Valid for IPv4, IPv6 packet or RoCE packets.
*/
#define RX_PKT_CMPL_ERRORS_PKT_ERROR_IP_TOTAL_ERROR \
(UINT32_C(0x4) << 12)
/*
* Indicates that the physical packet is shorter
* than that claimed by the UDP header length
* for a UDP packet that is not fragmented.
*/
#define RX_PKT_CMPL_ERRORS_PKT_ERROR_UDP_TOTAL_ERROR \
(UINT32_C(0x5) << 12)
/*
* Indicates that TCP header length > IP
* payload. Valid for TCP packets only.
*/
#define RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_HDR_LEN \
(UINT32_C(0x6) << 12)
/* Indicates that TCP header length < 5. Valid for TCP. */
#define RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_HDR_LEN_TOO_SMALL \
(UINT32_C(0x7) << 12)
/*
* Indicates that TCP option headers result in a
* TCP header size that does not match data
* offset in TCP header. Valid for TCP.
*/
#define RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_OPT_LEN \
(UINT32_C(0x8) << 12)
#define RX_PKT_CMPL_ERRORS_PKT_ERROR_LAST \
RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_OPT_LEN
#define RX_PKT_CMPL_ERRORS_MASK UINT32_C(0xfffe)
#define RX_PKT_CMPL_ERRORS_SFT 1
uint16_t cfa_code;
/*
* This field identifies the CFA action rule that was used for
* this packet.
*/
uint32_t reorder;
/*
* This value holds the reordering sequence number for the
* packet. If the reordering sequence is not valid, then this
* value is zero. The reordering domain for the packet is in the
* bottom 8 to 10b of the rss_hash value. The bottom 20b of this
* value contain the ordering domain value for the packet.
*/
#define RX_PKT_CMPL_REORDER_MASK UINT32_C(0xffffff)
#define RX_PKT_CMPL_REORDER_SFT 0
} __attribute__((packed));
/* RX L2 TPA Start Completion Record (32 bytes split to 2 16-byte struct) */
struct rx_tpa_start_cmpl {
uint16_t flags_type;
/*
* This field indicates the exact type of the completion. By
* convention, the LSB identifies the length of the record in
* 16B units. Even values indicate 16B records. Odd values
* indicate 32B records.
*/
#define RX_TPA_START_CMPL_TYPE_MASK UINT32_C(0x3f)
#define RX_TPA_START_CMPL_TYPE_SFT 0
/*
* RX L2 TPA Start Completion: Completion at the
* beginning of a TPA operation. Length = 32B
*/
#define RX_TPA_START_CMPL_TYPE_RX_TPA_START UINT32_C(0x13)
/* This bit will always be '0' for TPA start completions. */
#define RX_TPA_START_CMPL_FLAGS_ERROR UINT32_C(0x40)
/* This field indicates how the packet was placed in the buffer. */
#define RX_TPA_START_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380)
#define RX_TPA_START_CMPL_FLAGS_PLACEMENT_SFT 7
/*
* Jumbo: TPA Packet was placed using jumbo
* algorithm. This means that the first buffer
* will be filled with data before moving to
* aggregation buffers. Each aggregation buffer
* will be filled before moving to the next
* aggregation buffer.
*/
#define RX_TPA_START_CMPL_FLAGS_PLACEMENT_JUMBO (UINT32_C(0x1) << 7)
/*
* Header/Data Separation: Packet was placed
* using Header/Data separation algorithm. The
* separation location is indicated by the itype
* field.
*/
#define RX_TPA_START_CMPL_FLAGS_PLACEMENT_HDS (UINT32_C(0x2) << 7)
/*
* GRO/Jumbo: Packet will be placed using
* GRO/Jumbo where the first packet is filled
* with data. Subsequent packets will be placed
* such that any one packet does not span two
* aggregation buffers unless it starts at the
* beginning of an aggregation buffer.
*/
#define RX_TPA_START_CMPL_FLAGS_PLACEMENT_GRO_JUMBO \
(UINT32_C(0x5) << 7)
/*
* GRO/Header-Data Separation: Packet will be
* placed using GRO/HDS where the header is in
* the first packet. Payload of each packet will
* be placed such that any one packet does not
* span two aggregation buffers unless it starts
* at the beginning of an aggregation buffer.
*/
#define RX_TPA_START_CMPL_FLAGS_PLACEMENT_GRO_HDS (UINT32_C(0x6) << 7)
#define RX_TPA_START_CMPL_FLAGS_PLACEMENT_LAST \
RX_TPA_START_CMPL_FLAGS_PLACEMENT_GRO_HDS
/* This bit is '1' if the RSS field in this completion is valid. */
#define RX_TPA_START_CMPL_FLAGS_RSS_VALID UINT32_C(0x400)
/* unused is 1 b */
#define RX_TPA_START_CMPL_FLAGS_UNUSED UINT32_C(0x800)
/*
* This value indicates what the inner packet determined for the
* packet was.
*/
#define RX_TPA_START_CMPL_FLAGS_ITYPE_MASK UINT32_C(0xf000)
#define RX_TPA_START_CMPL_FLAGS_ITYPE_SFT 12
/* TCP Packet: Indicates that the packet was IP and TCP. */
#define RX_TPA_START_CMPL_FLAGS_ITYPE_TCP (UINT32_C(0x2) << 12)
#define RX_TPA_START_CMPL_FLAGS_ITYPE_LAST \
RX_TPA_START_CMPL_FLAGS_ITYPE_TCP
#define RX_TPA_START_CMPL_FLAGS_MASK UINT32_C(0xffc0)
#define RX_TPA_START_CMPL_FLAGS_SFT 6
uint16_t len;
/*
* This value indicates the amount of packet data written to the
* buffer the opaque field in this completion corresponds to.
*/
uint32_t opaque;
/*
* This is a copy of the opaque field from the RX BD this
* completion corresponds to.
*/
uint8_t v1;
/* unused1 is 7 b */
/*
* This value is written by the NIC such that it will be
* different for each pass through the completion queue. The
* even passes will write 1. The odd passes will write 0.
*/
#define RX_TPA_START_CMPL_V1 UINT32_C(0x1)
/* unused1 is 7 b */
uint8_t rss_hash_type;
/*
* This is the RSS hash type for the packet. The value is packed
* {tuple_extrac_op[1:0],rss_profile_id[4:0],tuple_extrac_op[2]}
* . The value of tuple_extrac_op provides the information about
* what fields the hash was computed on. * 0: The RSS hash was
* computed over source IP address, destination IP address,
* source port, and destination port of inner IP and TCP or UDP
* headers. Note: For non-tunneled packets, the packet headers
* are considered inner packet headers for the RSS hash
* computation purpose. * 1: The RSS hash was computed over
* source IP address and destination IP address of inner IP
* header. Note: For non-tunneled packets, the packet headers
* are considered inner packet headers for the RSS hash
* computation purpose. * 2: The RSS hash was computed over
* source IP address, destination IP address, source port, and
* destination port of IP and TCP or UDP headers of outer tunnel
* headers. Note: For non-tunneled packets, this value is not
* applicable. * 3: The RSS hash was computed over source IP
* address and destination IP address of IP header of outer
* tunnel headers. Note: For non-tunneled packets, this value is
* not applicable. Note that 4-tuples values listed above are
* applicable for layer 4 protocols supported and enabled for
* RSS in the hardware, HWRM firmware, and drivers. For example,
* if RSS hash is supported and enabled for TCP traffic only,
* then the values of tuple_extract_op corresponding to 4-tuples
* are only valid for TCP traffic.
*/
uint16_t agg_id;
/*
* This is the aggregation ID that the completion is associated
* with. Use this number to correlate the TPA start completion
* with the TPA end completion.
*/
/* unused2 is 9 b */
/*
* This is the aggregation ID that the completion is associated
* with. Use this number to correlate the TPA start completion
* with the TPA end completion.
*/
#define RX_TPA_START_CMPL_AGG_ID_MASK UINT32_C(0xfe00)
#define RX_TPA_START_CMPL_AGG_ID_SFT 9
uint32_t rss_hash;
/*
* This value is the RSS hash value calculated for the packet
* based on the mode bits and key value in the VNIC.
*/
} __attribute__((packed));
/* last 16 bytes of RX L2 TPA Start Completion Record */
struct rx_tpa_start_cmpl_hi {
uint32_t flags2;
/*
* This indicates that the ip checksum was calculated for the
* inner packet and that the sum passed for all segments
* included in the aggregation.
*/
#define RX_TPA_START_CMPL_FLAGS2_IP_CS_CALC UINT32_C(0x1)
/*
* This indicates that the TCP, UDP or ICMP checksum was
* calculated for the inner packet and that the sum passed for
* all segments included in the aggregation.
*/
#define RX_TPA_START_CMPL_FLAGS2_L4_CS_CALC UINT32_C(0x2)
/*
* This indicates that the ip checksum was calculated for the
* tunnel header and that the sum passed for all segments
* included in the aggregation.
*/
#define RX_TPA_START_CMPL_FLAGS2_T_IP_CS_CALC UINT32_C(0x4)
/*
* This indicates that the UDP checksum was calculated for the
* tunnel packet and that the sum passed for all segments
* included in the aggregation.
*/
#define RX_TPA_START_CMPL_FLAGS2_T_L4_CS_CALC UINT32_C(0x8)
/* This value indicates what format the metadata field is. */
#define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_MASK UINT32_C(0xf0)
#define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_SFT 4
/* No metadata informtaion. Value is zero. */
#define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_NONE (UINT32_C(0x0) << 4)
/*
* The metadata field contains the VLAN tag and
* TPID value. - metadata[11:0] contains the
* vlan VID value. - metadata[12] contains the
* vlan DE value. - metadata[15:13] contains the
* vlan PRI value. - metadata[31:16] contains
* the vlan TPID value.
*/
#define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_VLAN (UINT32_C(0x1) << 4)
#define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_LAST \
RX_TPA_START_CMPL_FLAGS2_META_FORMAT_VLAN
/*
* This field indicates the IP type for the inner-most IP
* header. A value of '0' indicates IPv4. A value of '1'
* indicates IPv6.
*/
#define RX_TPA_START_CMPL_FLAGS2_IP_TYPE UINT32_C(0x100)
uint32_t metadata;
/*
* This is data from the CFA block as indicated by the
* meta_format field.
*/
/* When meta_format=1, this value is the VLAN VID. */
#define RX_TPA_START_CMPL_METADATA_VID_MASK UINT32_C(0xfff)
#define RX_TPA_START_CMPL_METADATA_VID_SFT 0
/* When meta_format=1, this value is the VLAN DE. */
#define RX_TPA_START_CMPL_METADATA_DE UINT32_C(0x1000)
/* When meta_format=1, this value is the VLAN PRI. */
#define RX_TPA_START_CMPL_METADATA_PRI_MASK UINT32_C(0xe000)
#define RX_TPA_START_CMPL_METADATA_PRI_SFT 13
/* When meta_format=1, this value is the VLAN TPID. */
#define RX_TPA_START_CMPL_METADATA_TPID_MASK UINT32_C(0xffff0000)
#define RX_TPA_START_CMPL_METADATA_TPID_SFT 16
uint16_t v2;
/* unused4 is 15 b */
/*
* This value is written by the NIC such that it will be
* different for each pass through the completion queue. The
* even passes will write 1. The odd passes will write 0.
*/
#define RX_TPA_START_CMPL_V2 UINT32_C(0x1)
/* unused4 is 15 b */
uint16_t cfa_code;
/*
* This field identifies the CFA action rule that was used for
* this packet.
*/
uint32_t inner_l4_size_inner_l3_offset_inner_l2_offset_outer_l3_offset;
/*
* This is the size in bytes of the inner most L4 header. This
* can be subtracted from the payload_offset to determine the
* start of the inner most L4 header.
*/
/*
* This is the offset from the beginning of the packet in bytes
* for the outer L3 header. If there is no outer L3 header, then
* this value is zero.
*/
#define RX_TPA_START_CMPL_OUTER_L3_OFFSET_MASK UINT32_C(0x1ff)
#define RX_TPA_START_CMPL_OUTER_L3_OFFSET_SFT 0
/*
* This is the offset from the beginning of the packet in bytes
* for the inner most L2 header.
*/
#define RX_TPA_START_CMPL_INNER_L2_OFFSET_MASK UINT32_C(0x3fe00)
#define RX_TPA_START_CMPL_INNER_L2_OFFSET_SFT 9
/*
* This is the offset from the beginning of the packet in bytes
* for the inner most L3 header.
*/
#define RX_TPA_START_CMPL_INNER_L3_OFFSET_MASK UINT32_C(0x7fc0000)
#define RX_TPA_START_CMPL_INNER_L3_OFFSET_SFT 18
/*
* This is the size in bytes of the inner most L4 header. This
* can be subtracted from the payload_offset to determine the
* start of the inner most L4 header.
*/
#define RX_TPA_START_CMPL_INNER_L4_SIZE_MASK UINT32_C(0xf8000000)
#define RX_TPA_START_CMPL_INNER_L4_SIZE_SFT 27
} __attribute__((packed));
/* RX TPA End Completion Record (32 bytes split to 2 16-byte struct) */
struct rx_tpa_end_cmpl {
uint16_t flags_type;
/*
* This field indicates the exact type of the completion. By
* convention, the LSB identifies the length of the record in
* 16B units. Even values indicate 16B records. Odd values
* indicate 32B records.
*/
#define RX_TPA_END_CMPL_TYPE_MASK UINT32_C(0x3f)
#define RX_TPA_END_CMPL_TYPE_SFT 0
/*
* RX L2 TPA End Completion: Completion at the
* end of a TPA operation. Length = 32B
*/
#define RX_TPA_END_CMPL_TYPE_RX_TPA_END UINT32_C(0x15)
/*
* When this bit is '1', it indicates a packet that has an error
* of some type. Type of error is indicated in error_flags.
*/
#define RX_TPA_END_CMPL_FLAGS_ERROR UINT32_C(0x40)
/* This field indicates how the packet was placed in the buffer. */
#define RX_TPA_END_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380)
#define RX_TPA_END_CMPL_FLAGS_PLACEMENT_SFT 7
/*
* Jumbo: TPA Packet was placed using jumbo
* algorithm. This means that the first buffer
* will be filled with data before moving to
* aggregation buffers. Each aggregation buffer
* will be filled before moving to the next
* aggregation buffer.
*/
#define RX_TPA_END_CMPL_FLAGS_PLACEMENT_JUMBO (UINT32_C(0x1) << 7)
/*
* Header/Data Separation: Packet was placed
* using Header/Data separation algorithm. The
* separation location is indicated by the itype
* field.
*/
#define RX_TPA_END_CMPL_FLAGS_PLACEMENT_HDS (UINT32_C(0x2) << 7)
/*
* GRO/Jumbo: Packet will be placed using
* GRO/Jumbo where the first packet is filled
* with data. Subsequent packets will be placed
* such that any one packet does not span two
* aggregation buffers unless it starts at the
* beginning of an aggregation buffer.
*/
#define RX_TPA_END_CMPL_FLAGS_PLACEMENT_GRO_JUMBO (UINT32_C(0x5) << 7)
/*
* GRO/Header-Data Separation: Packet will be
* placed using GRO/HDS where the header is in
* the first packet. Payload of each packet will
* be placed such that any one packet does not
* span two aggregation buffers unless it starts
* at the beginning of an aggregation buffer.
*/
#define RX_TPA_END_CMPL_FLAGS_PLACEMENT_GRO_HDS (UINT32_C(0x6) << 7)
#define RX_TPA_END_CMPL_FLAGS_PLACEMENT_LAST \
RX_TPA_END_CMPL_FLAGS_PLACEMENT_GRO_HDS
/* unused is 2 b */
#define RX_TPA_END_CMPL_FLAGS_UNUSED_MASK UINT32_C(0xc00)
#define RX_TPA_END_CMPL_FLAGS_UNUSED_SFT 10
/*
* This value indicates what the inner packet determined for the
* packet was. - 2 TCP Packet Indicates that the packet was IP
* and TCP. This indicates that the ip_cs field is valid and
* that the tcp_udp_cs field is valid and contains the TCP
* checksum. This also indicates that the payload_offset field
* is valid.
*/
#define RX_TPA_END_CMPL_FLAGS_ITYPE_MASK UINT32_C(0xf000)
#define RX_TPA_END_CMPL_FLAGS_ITYPE_SFT 12
#define RX_TPA_END_CMPL_FLAGS_MASK UINT32_C(0xffc0)
#define RX_TPA_END_CMPL_FLAGS_SFT 6
uint16_t len;
/*
* This value is zero for TPA End completions. There is no data
* in the buffer that corresponds to the opaque value in this
* completion.
*/
uint32_t opaque;
/*
* This is a copy of the opaque field from the RX BD this
* completion corresponds to.
*/
uint8_t agg_bufs_v1;
/* unused1 is 1 b */
/*
* This value is written by the NIC such that it will be
* different for each pass through the completion queue. The
* even passes will write 1. The odd passes will write 0.
*/
#define RX_TPA_END_CMPL_V1 UINT32_C(0x1)
/*
* This value is the number of aggregation buffers that follow
* this entry in the completion ring that are a part of this
* aggregation packet. If the value is zero, then the packet is
* completely contained in the buffer space provided in the
* aggregation start completion.
*/
#define RX_TPA_END_CMPL_AGG_BUFS_MASK UINT32_C(0x7e)
#define RX_TPA_END_CMPL_AGG_BUFS_SFT 1
/* unused1 is 1 b */
uint8_t tpa_segs;
/* This value is the number of segments in the TPA operation. */
uint8_t payload_offset;
/*
* This value indicates the offset in bytes from the beginning
* of the packet where the inner payload starts. This value is
* valid for TCP, UDP, FCoE, and RoCE packets. A value of zero
* indicates an offset of 256 bytes.
*/
uint8_t agg_id;
/*
* This is the aggregation ID that the completion is associated
* with. Use this number to correlate the TPA start completion
* with the TPA end completion.
*/
/* unused2 is 1 b */
/*
* This is the aggregation ID that the completion is associated
* with. Use this number to correlate the TPA start completion
* with the TPA end completion.
*/
#define RX_TPA_END_CMPL_AGG_ID_MASK UINT32_C(0xfe)
#define RX_TPA_END_CMPL_AGG_ID_SFT 1
uint32_t tsdelta;
/*
* For non-GRO packets, this value is the timestamp delta
* between earliest and latest timestamp values for TPA packet.
* If packets were not time stamped, then delta will be zero.
* For GRO packets, this field is zero except for the following
* sub-fields. - tsdelta[31] Timestamp present indication. When
* '0', no Timestamp option is in the packet. When '1', then a
* Timestamp option is present in the packet.
*/
} __attribute__((packed));
/* last 16 bytes of RX TPA End Completion Record */
struct rx_tpa_end_cmpl_hi {
uint32_t tpa_dup_acks;
/* unused3 is 28 b */
/*
* This value is the number of duplicate ACKs that have been
* received as part of the TPA operation.
*/
#define RX_TPA_END_CMPL_TPA_DUP_ACKS_MASK UINT32_C(0xf)
#define RX_TPA_END_CMPL_TPA_DUP_ACKS_SFT 0
/* unused3 is 28 b */
uint16_t tpa_seg_len;
/*
* This value is the valid when TPA completion is active. It
* indicates the length of the longest segment of the TPA
* operation for LRO mode and the length of the first segment in
* GRO mode. This value may be used by GRO software to re-
* construct the original packet stream from the TPA packet.
* This is the length of all but the last segment for GRO. In
* LRO mode this value may be used to indicate MSS size to the
* stack.
*/
uint16_t unused_3;
/* unused4 is 16 b */
uint16_t errors_v2;
/*
* This value is written by the NIC such that it will be
* different for each pass through the completion queue. The
* even passes will write 1. The odd passes will write 0.
*/
#define RX_TPA_END_CMPL_V2 UINT32_C(0x1)
/*
* This error indicates that there was some sort of problem with
* the BDs for the packet that was found after part of the
* packet was already placed. The packet should be treated as
* invalid.
*/
#define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe)
#define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_SFT 1
/*
* This error occurs when there is a fatal HW
* problem in the chip only. It indicates that
* there were not BDs on chip but that there was
* adequate reservation. provided by the TPA
* block.
*/
#define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_NOT_ON_CHIP \
(UINT32_C(0x2) << 1)
/*
* This error occurs when TPA block was not
* configured to reserve adequate BDs for TPA
* operations on this RX ring. All data for the
* TPA operation was not placed. This error can
* also be generated when the number of segments
* is not programmed correctly in TPA and the 33
* total aggregation buffers allowed for the TPA
* operation has been exceeded.
*/
#define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_RSV_ERROR \
(UINT32_C(0x4) << 1)
#define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_LAST \
RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_RSV_ERROR
#define RX_TPA_END_CMPL_ERRORS_MASK UINT32_C(0xfffe)
#define RX_TPA_END_CMPL_ERRORS_SFT 1
uint16_t unused_4;
/* unused5 is 16 b */
uint32_t start_opaque;
/*
* This is the opaque value that was completed for the TPA start
* completion that corresponds to this TPA end completion.
*/
} __attribute__((packed));
/* HWRM Forwarded Request (16 bytes) */
struct hwrm_fwd_req_cmpl {
uint16_t req_len_type;
/* Length of forwarded request in bytes. */
/*
* This field indicates the exact type of the completion. By
* convention, the LSB identifies the length of the record in
* 16B units. Even values indicate 16B records. Odd values
* indicate 32B records.
*/
#define HWRM_FWD_INPUT_CMPL_TYPE_MASK UINT32_C(0x3f)
#define HWRM_FWD_INPUT_CMPL_TYPE_SFT 0
/* Forwarded HWRM Request */
#define HWRM_FWD_INPUT_CMPL_TYPE_HWRM_FWD_INPUT UINT32_C(0x22)
/* Length of forwarded request in bytes. */
#define HWRM_FWD_REQ_CMPL_REQ_LEN_MASK UINT32_C(0xffc0)
#define HWRM_FWD_REQ_CMPL_REQ_LEN_SFT 6
uint16_t source_id;
/*
* Source ID of this request. Typically used in forwarding
* requests and responses. 0x0 - 0xFFF8 - Used for function ids
* 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF -
* HWRM
*/
uint32_t unused_0;
/* unused1 is 32 b */
uint32_t req_buf_addr_v[2];
/* Address of forwarded request. */
/*
* This value is written by the NIC such that it will be
* different for each pass through the completion queue. The
* even passes will write 1. The odd passes will write 0.
*/
#define HWRM_FWD_INPUT_CMPL_V UINT32_C(0x1)
/* Address of forwarded request. */
#define HWRM_FWD_REQ_CMPL_REQ_BUF_ADDR_MASK UINT32_C(0xfffffffe)
#define HWRM_FWD_REQ_CMPL_REQ_BUF_ADDR_SFT 1
} __attribute__((packed));
/* HWRM Asynchronous Event Completion Record (16 bytes) */
struct hwrm_async_event_cmpl {
uint16_t type;
/* unused1 is 10 b */
/*
* This field indicates the exact type of the completion. By
* convention, the LSB identifies the length of the record in
* 16B units. Even values indicate 16B records. Odd values
* indicate 32B records.
*/
#define HWRM_ASYNC_EVENT_CMPL_TYPE_MASK UINT32_C(0x3f)
#define HWRM_ASYNC_EVENT_CMPL_TYPE_SFT 0
/* HWRM Asynchronous Event Information */
#define HWRM_ASYNC_EVENT_CMPL_TYPE_HWRM_ASYNC_EVENT UINT32_C(0x2e)
/* unused1 is 10 b */
uint16_t event_id;
/* Identifiers of events. */
/* Link status changed */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_STATUS_CHANGE UINT32_C(0x0)
/* Link MTU changed */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_MTU_CHANGE UINT32_C(0x1)
/* Link speed changed */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CHANGE UINT32_C(0x2)
/* DCB Configuration changed */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_DCB_CONFIG_CHANGE UINT32_C(0x3)
/* Port connection not allowed */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PORT_CONN_NOT_ALLOWED UINT32_C(0x4)
/* Link speed configuration was not allowed */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CFG_NOT_ALLOWED \
UINT32_C(0x5)
/* Link speed configuration change */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CFG_CHANGE UINT32_C(0x6)
/* Port PHY configuration change */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PORT_PHY_CFG_CHANGE UINT32_C(0x7)
/* Function driver unloaded */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_DRVR_UNLOAD UINT32_C(0x10)
/* Function driver loaded */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_DRVR_LOAD UINT32_C(0x11)
/* Function FLR related processing has completed */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_FLR_PROC_CMPLT UINT32_C(0x12)
/* PF driver unloaded */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_DRVR_UNLOAD UINT32_C(0x20)
/* PF driver loaded */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_DRVR_LOAD UINT32_C(0x21)
/* VF Function Level Reset (FLR) */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_FLR UINT32_C(0x30)
/* VF MAC Address Change */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_MAC_ADDR_CHANGE UINT32_C(0x31)
/* PF-VF communication channel status change. */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_VF_COMM_STATUS_CHANGE \
UINT32_C(0x32)
/* VF Configuration Change */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_CFG_CHANGE UINT32_C(0x33)
/* LLFC/PFC Configuration Change */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LLFC_PFC_CHANGE UINT32_C(0x34)
/* HWRM Error */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_HWRM_ERROR UINT32_C(0xff)
uint32_t event_data2;
/* Event specific data */
uint8_t opaque_v;
/* opaque is 7 b */
/*
* This value is written by the NIC such that it will be
* different for each pass through the completion queue. The
* even passes will write 1. The odd passes will write 0.
*/
#define HWRM_ASYNC_EVENT_CMPL_V UINT32_C(0x1)
/* opaque is 7 b */
#define HWRM_ASYNC_EVENT_CMPL_OPAQUE_MASK UINT32_C(0xfe)
#define HWRM_ASYNC_EVENT_CMPL_OPAQUE_SFT 1
uint8_t timestamp_lo;
/* 8-lsb timestamp from POR (100-msec resolution) */
uint16_t timestamp_hi;
/* 16-lsb timestamp from POR (100-msec resolution) */
uint32_t event_data1;
/* Event specific data */
} __attribute__((packed));
/* hwrm_ver_get */
/*
* Description: This function is called by a driver to determine the HWRM
* interface version supported by the HWRM firmware, the version of HWRM
* firmware implementation, the name of HWRM firmware, the versions of other
* embedded firmwares, and the names of other embedded firmwares, etc. Any
* interface or firmware version with major = 0, minor = 0, and update = 0 shall
* be considered an invalid version.
*/
/* Input (24 bytes) */
struct hwrm_ver_get_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint8_t hwrm_intf_maj;
/*
* This field represents the major version of HWRM interface
* specification supported by the driver HWRM implementation.
* The interface major version is intended to change only when
* non backward compatible changes are made to the HWRM
* interface specification.
*/
uint8_t hwrm_intf_min;
/*
* This field represents the minor version of HWRM interface
* specification supported by the driver HWRM implementation. A
* change in interface minor version is used to reflect
* significant backward compatible modification to HWRM
* interface specification. This can be due to addition or
* removal of functionality. HWRM interface specifications with
* the same major version but different minor versions are
* compatible.
*/
uint8_t hwrm_intf_upd;
/*
* This field represents the update version of HWRM interface
* specification supported by the driver HWRM implementation.
* The interface update version is used to reflect minor changes
* or bug fixes to a released HWRM interface specification.
*/
uint8_t unused_0[5];
} __attribute__((packed));
/* Output (128 bytes) */
struct hwrm_ver_get_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint8_t hwrm_intf_maj;
/*
* This field represents the major version of HWRM interface
* specification supported by the HWRM implementation. The
* interface major version is intended to change only when non
* backward compatible changes are made to the HWRM interface
* specification. A HWRM implementation that is compliant with
* this specification shall provide value of 1 in this field.
*/
uint8_t hwrm_intf_min;
/*
* This field represents the minor version of HWRM interface
* specification supported by the HWRM implementation. A change
* in interface minor version is used to reflect significant
* backward compatible modification to HWRM interface
* specification. This can be due to addition or removal of
* functionality. HWRM interface specifications with the same
* major version but different minor versions are compatible. A
* HWRM implementation that is compliant with this specification
* shall provide value of 2 in this field.
*/
uint8_t hwrm_intf_upd;
/*
* This field represents the update version of HWRM interface
* specification supported by the HWRM implementation. The
* interface update version is used to reflect minor changes or
* bug fixes to a released HWRM interface specification. A HWRM
* implementation that is compliant with this specification
* shall provide value of 2 in this field.
*/
uint8_t hwrm_intf_rsvd;
uint8_t hwrm_fw_maj;
/*
* This field represents the major version of HWRM firmware. A
* change in firmware major version represents a major firmware
* release.
*/
uint8_t hwrm_fw_min;
/*
* This field represents the minor version of HWRM firmware. A
* change in firmware minor version represents significant
* firmware functionality changes.
*/
uint8_t hwrm_fw_bld;
/*
* This field represents the build version of HWRM firmware. A
* change in firmware build version represents bug fixes to a
* released firmware.
*/
uint8_t hwrm_fw_rsvd;
/*
* This field is a reserved field. This field can be used to
* represent firmware branches or customer specific releases
* tied to a specific (major,minor,update) version of the HWRM
* firmware.
*/
uint8_t mgmt_fw_maj;
/*
* This field represents the major version of mgmt firmware. A
* change in major version represents a major release.
*/
uint8_t mgmt_fw_min;
/*
* This field represents the minor version of mgmt firmware. A
* change in minor version represents significant functionality
* changes.
*/
uint8_t mgmt_fw_bld;
/*
* This field represents the build version of mgmt firmware. A
* change in update version represents bug fixes.
*/
uint8_t mgmt_fw_rsvd;
/*
* This field is a reserved field. This field can be used to
* represent firmware branches or customer specific releases
* tied to a specific (major,minor,update) version
*/
uint8_t netctrl_fw_maj;
/*
* This field represents the major version of network control
* firmware. A change in major version represents a major
* release.
*/
uint8_t netctrl_fw_min;
/*
* This field represents the minor version of network control
* firmware. A change in minor version represents significant
* functionality changes.
*/
uint8_t netctrl_fw_bld;
/*
* This field represents the build version of network control
* firmware. A change in update version represents bug fixes.
*/
uint8_t netctrl_fw_rsvd;
/*
* This field is a reserved field. This field can be used to
* represent firmware branches or customer specific releases
* tied to a specific (major,minor,update) version
*/
uint32_t dev_caps_cfg;
/*
* This field is used to indicate device's capabilities and
* configurations.
*/
/*
* If set to 1, then secure firmware update behavior is
* supported. If set to 0, then secure firmware update behavior
* is not supported.
*/
#define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_SECURE_FW_UPD_SUPPORTED \
UINT32_C(0x1)
/*
* If set to 1, then firmware based DCBX agent is supported. If
* set to 0, then firmware based DCBX agent capability is not
* supported on this device.
*/
#define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_FW_DCBX_AGENT_SUPPORTED \
UINT32_C(0x2)
/*
* If set to 1, then HWRM short command format is supported. If
* set to 0, then HWRM short command format is not supported.
*/
#define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_SHORT_CMD_SUPPORTED \
UINT32_C(0x4)
/*
* If set to 1, then HWRM short command format is required. If
* set to 0, then HWRM short command format is not required.
*/
#define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_SHORT_CMD_INPUTUIRED \
UINT32_C(0x8)
uint8_t roce_fw_maj;
/*
* This field represents the major version of RoCE firmware. A
* change in major version represents a major release.
*/
uint8_t roce_fw_min;
/*
* This field represents the minor version of RoCE firmware. A
* change in minor version represents significant functionality
* changes.
*/
uint8_t roce_fw_bld;
/*
* This field represents the build version of RoCE firmware. A
* change in update version represents bug fixes.
*/
uint8_t roce_fw_rsvd;
/*
* This field is a reserved field. This field can be used to
* represent firmware branches or customer specific releases
* tied to a specific (major,minor,update) version
*/
char hwrm_fw_name[16];
/*
* This field represents the name of HWRM FW (ASCII chars with
* NULL at the end).
*/
char mgmt_fw_name[16];
/*
* This field represents the name of mgmt FW (ASCII chars with
* NULL at the end).
*/
char netctrl_fw_name[16];
/*
* This field represents the name of network control firmware
* (ASCII chars with NULL at the end).
*/
uint32_t reserved2[4];
/*
* This field is reserved for future use. The responder should
* set it to 0. The requester should ignore this field.
*/
char roce_fw_name[16];
/*
* This field represents the name of RoCE FW (ASCII chars with
* NULL at the end).
*/
uint16_t chip_num;
/* This field returns the chip number. */
uint8_t chip_rev;
/* This field returns the revision of chip. */
uint8_t chip_metal;
/* This field returns the chip metal number. */
uint8_t chip_bond_id;
/* This field returns the bond id of the chip. */
uint8_t chip_platform_type;
/*
* This value indicates the type of platform used for chip
* implementation.
*/
/* ASIC */
#define HWRM_VER_GET_OUTPUT_CHIP_PLATFORM_TYPE_ASIC UINT32_C(0x0)
/* FPGA platform of the chip. */
#define HWRM_VER_GET_OUTPUT_CHIP_PLATFORM_TYPE_FPGA UINT32_C(0x1)
/* Palladium platform of the chip. */
#define HWRM_VER_GET_OUTPUT_CHIP_PLATFORM_TYPE_PALLADIUM UINT32_C(0x2)
uint16_t max_req_win_len;
/*
* This field returns the maximum value of request window that
* is supported by the HWRM. The request window is mapped into
* device address space using MMIO.
*/
uint16_t max_resp_len;
/* This field returns the maximum value of response buffer in bytes. */
uint16_t def_req_timeout;
/*
* This field returns the default request timeout value in
* milliseconds.
*/
uint8_t init_pending;
/*
* This field will indicate if any subsystems is not fully
* initialized.
*/
/*
* If set to 1, device is not ready. If set to 0, device is
* ready to accept all HWRM commands.
*/
#define HWRM_VER_GET_OUTPUT_INIT_PENDING_DEV_NOT_RDY UINT32_C(0x1)
uint8_t unused_0;
uint8_t unused_1;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_func_reset */
/*
* Description: This command resets a hardware function (PCIe function) and
* frees any resources used by the function. This command shall be initiated by
* the driver after an FLR has occurred to prepare the function for re-use. This
* command may also be initiated by a driver prior to doing it's own
* configuration. This command puts the function into the reset state. In the
* reset state, global and port related features of the chip are not available.
*/
/*
* Note: This command will reset a function that has already been disabled or
* idled. The command returns all the resources owned by the function so a new
* driver may allocate and configure resources normally.
*/
/* Input (24 bytes) */
struct hwrm_func_reset_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint32_t enables;
/* This bit must be '1' for the vf_id_valid field to be configured. */
#define HWRM_FUNC_RESET_INPUT_ENABLES_VF_ID_VALID UINT32_C(0x1)
uint16_t vf_id;
/*
* The ID of the VF that this PF is trying to reset. Only the
* parent PF shall be allowed to reset a child VF. A parent PF
* driver shall use this field only when a specific child VF is
* requested to be reset.
*/
uint8_t func_reset_level;
/* This value indicates the level of a function reset. */
/*
* Reset the caller function and its children
* VFs (if any). If no children functions exist,
* then reset the caller function only.
*/
#define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETALL UINT32_C(0x0)
/* Reset the caller function only */
#define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETME UINT32_C(0x1)
/*
* Reset all children VFs of the caller function
* driver if the caller is a PF driver. It is an
* error to specify this level by a VF driver.
* It is an error to specify this level by a PF
* driver with no children VFs.
*/
#define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETCHILDREN \
UINT32_C(0x2)
/*
* Reset a specific VF of the caller function
* driver if the caller is the parent PF driver.
* It is an error to specify this level by a VF
* driver. It is an error to specify this level
* by a PF driver that is not the parent of the
* VF that is being requested to reset.
*/
#define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETVF UINT32_C(0x3)
uint8_t unused_0;
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_func_reset_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_func_vf_cfg */
/*
* Description: This command allows configuration of a VF by its driver. If this
* function is called by a PF driver, then the HWRM shall fail this command. If
* guest VLAN and/or MAC address are provided in this command, then the HWRM
* shall set up appropriate MAC/VLAN filters for the VF that is being
* configured. A VF driver should set VF MTU/MRU using this command prior to
* allocating RX VNICs or TX rings for the corresponding VF.
*/
/* Input (32 bytes) */
struct hwrm_func_vf_cfg_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format for the
* rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request will be
* optionally completed on. If the value is -1, then no CR completion
* will be generated. Any other value must be a valid CR ring_id value
* for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
* 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written when the
* request is complete. This area must be 16B aligned and must be
* cleared to zero before the request is made.
*/
uint32_t enables;
/* This bit must be '1' for the mtu field to be configured. */
#define HWRM_FUNC_VF_CFG_INPUT_ENABLES_MTU UINT32_C(0x1)
/* This bit must be '1' for the guest_vlan field to be configured. */
#define HWRM_FUNC_VF_CFG_INPUT_ENABLES_GUEST_VLAN UINT32_C(0x2)
/*
* This bit must be '1' for the async_event_cr field to be configured.
*/
#define HWRM_FUNC_VF_CFG_INPUT_ENABLES_ASYNC_EVENT_CR UINT32_C(0x4)
/* This bit must be '1' for the dflt_mac_addr field to be configured. */
#define HWRM_FUNC_VF_CFG_INPUT_ENABLES_DFLT_MAC_ADDR UINT32_C(0x8)
uint16_t mtu;
/*
* The maximum transmission unit requested on the function. The HWRM
* should make sure that the mtu of the function does not exceed the mtu
* of the physical port that this function is associated with. In
* addition to requesting mtu per function, it is possible to configure
* mtu per transmit ring. By default, the mtu of each transmit ring
* associated with a function is equal to the mtu of the function. The
* HWRM should make sure that the mtu of each transmit ring that is
* assigned to a function has a valid mtu.
*/
uint16_t guest_vlan;
/*
* The guest VLAN for the function being configured. This field's format
* is same as 802.1Q Tag's Tag Control Information (TCI) format that
* includes both Priority Code Point (PCP) and VLAN Identifier (VID).
*/
uint16_t async_event_cr;
/*
* ID of the target completion ring for receiving asynchronous event
* completions. If this field is not valid, then the HWRM shall use the
* default completion ring of the function that is being configured as
* the target completion ring for providing any asynchronous event
* completions for that function. If this field is valid, then the HWRM
* shall use the completion ring identified by this ID as the target
* completion ring for providing any asynchronous event completions for
* the function that is being configured.
*/
uint8_t dflt_mac_addr[6];
/*
* This value is the current MAC address requested by the VF driver to
* be configured on this VF. A value of 00-00-00-00-00-00 indicates no
* MAC address configuration is requested by the VF driver. The parent
* PF driver may reject or overwrite this MAC address.
*/
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_func_vf_cfg_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in parameters,
* and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the output is
* completely written to RAM. This field should be read as '1' to
* indicate that the output has been completely written. When writing a
* command completion or response to an internal processor, the order of
* writes has to be such that this field is written last.
*/
} __attribute__((packed));
/* hwrm_func_qcaps */
/*
* Description: This command returns capabilities of a function. The input FID
* value is used to indicate what function is being queried. This allows a
* physical function driver to query virtual functions that are children of the
* physical function. The output FID value is needed to configure Rings and
* MSI-X vectors so their DMA operations appear correctly on the PCI bus.
*/
/* Input (24 bytes) */
struct hwrm_func_qcaps_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint16_t fid;
/*
* Function ID of the function that is being queried. 0xFF...
* (All Fs) if the query is for the requesting function.
*/
uint16_t unused_0[3];
} __attribute__((packed));
/* Output (80 bytes) */
struct hwrm_func_qcaps_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint16_t fid;
/*
* FID value. This value is used to identify operations on the
* PCI bus as belonging to a particular PCI function.
*/
uint16_t port_id;
/*
* Port ID of port that this function is associated with. Valid
* only for the PF. 0xFF... (All Fs) if this function is not
* associated with any port. 0xFF... (All Fs) if this function
* is called from a VF.
*/
uint32_t flags;
/* If 1, then Push mode is supported on this function. */
#define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PUSH_MODE_SUPPORTED UINT32_C(0x1)
/*
* If 1, then the global MSI-X auto-masking is enabled for the
* device.
*/
#define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_GLOBAL_MSIX_AUTOMASKING \
UINT32_C(0x2)
/*
* If 1, then the Precision Time Protocol (PTP) processing is
* supported on this function. The HWRM should enable PTP on
* only a single Physical Function (PF) per port.
*/
#define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PTP_SUPPORTED UINT32_C(0x4)
/*
* If 1, then RDMA over Converged Ethernet (RoCE) v1 is
* supported on this function.
*/
#define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ROCE_V1_SUPPORTED UINT32_C(0x8)
/*
* If 1, then RDMA over Converged Ethernet (RoCE) v2 is
* supported on this function.
*/
#define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ROCE_V2_SUPPORTED UINT32_C(0x10)
/*
* If 1, then control and configuration of WoL magic packet are
* supported on this function.
*/
#define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_WOL_MAGICPKT_SUPPORTED \
UINT32_C(0x20)
/*
* If 1, then control and configuration of bitmap pattern packet
* are supported on this function.
*/
#define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_WOL_BMP_SUPPORTED UINT32_C(0x40)
/*
* If set to 1, then the control and configuration of rate limit
* of an allocated TX ring on the queried function is supported.
*/
#define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_TX_RING_RL_SUPPORTED UINT32_C(0x80)
/*
* If 1, then control and configuration of minimum and maximum
* bandwidths are supported on the queried function.
*/
#define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_TX_BW_CFG_SUPPORTED UINT32_C(0x100)
/*
* If the query is for a VF, then this flag shall be ignored. If
* this query is for a PF and this flag is set to 1, then the PF
* has the capability to set the rate limits on the TX rings of
* its children VFs. If this query is for a PF and this flag is
* set to 0, then the PF does not have the capability to set the
* rate limits on the TX rings of its children VFs.
*/
#define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_VF_TX_RING_RL_SUPPORTED \
UINT32_C(0x200)
/*
* If the query is for a VF, then this flag shall be ignored. If
* this query is for a PF and this flag is set to 1, then the PF
* has the capability to set the minimum and/or maximum
* bandwidths for its children VFs. If this query is for a PF
* and this flag is set to 0, then the PF does not have the
* capability to set the minimum or maximum bandwidths for its
* children VFs.
*/
#define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_VF_BW_CFG_SUPPORTED UINT32_C(0x400)
/*
* Standard TX Ring mode is used for the allocation of TX ring
* and underlying scheduling resources that allow bandwidth
* reservation and limit settings on the queried function. If
* set to 1, then standard TX ring mode is supported on the
* queried function. If set to 0, then standard TX ring mode is
* not available on the queried function.
*/
#define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_STD_TX_RING_MODE_SUPPORTED \
UINT32_C(0x800)
uint8_t mac_address[6];
/*
* This value is current MAC address configured for this
* function. A value of 00-00-00-00-00-00 indicates no MAC
* address is currently configured.
*/
uint16_t max_rsscos_ctx;
/*
* The maximum number of RSS/COS contexts that can be allocated
* to the function.
*/
uint16_t max_cmpl_rings;
/*
* The maximum number of completion rings that can be allocated
* to the function.
*/
uint16_t max_tx_rings;
/*
* The maximum number of transmit rings that can be allocated to
* the function.
*/
uint16_t max_rx_rings;
/*
* The maximum number of receive rings that can be allocated to
* the function.
*/
uint16_t max_l2_ctxs;
/*
* The maximum number of L2 contexts that can be allocated to
* the function.
*/
uint16_t max_vnics;
/*
* The maximum number of VNICs that can be allocated to the
* function.
*/
uint16_t first_vf_id;
/*
* The identifier for the first VF enabled on a PF. This is
* valid only on the PF with SR-IOV enabled. 0xFF... (All Fs) if
* this command is called on a PF with SR-IOV disabled or on a
* VF.
*/
uint16_t max_vfs;
/*
* The maximum number of VFs that can be allocated to the
* function. This is valid only on the PF with SR-IOV enabled.
* 0xFF... (All Fs) if this command is called on a PF with SR-
* IOV disabled or on a VF.
*/
uint16_t max_stat_ctx;
/*
* The maximum number of statistic contexts that can be
* allocated to the function.
*/
uint32_t max_encap_records;
/*
* The maximum number of Encapsulation records that can be
* offloaded by this function.
*/
uint32_t max_decap_records;
/*
* The maximum number of decapsulation records that can be
* offloaded by this function.
*/
uint32_t max_tx_em_flows;
/*
* The maximum number of Exact Match (EM) flows that can be
* offloaded by this function on the TX side.
*/
uint32_t max_tx_wm_flows;
/*
* The maximum number of Wildcard Match (WM) flows that can be
* offloaded by this function on the TX side.
*/
uint32_t max_rx_em_flows;
/*
* The maximum number of Exact Match (EM) flows that can be
* offloaded by this function on the RX side.
*/
uint32_t max_rx_wm_flows;
/*
* The maximum number of Wildcard Match (WM) flows that can be
* offloaded by this function on the RX side.
*/
uint32_t max_mcast_filters;
/*
* The maximum number of multicast filters that can be supported
* by this function on the RX side.
*/
uint32_t max_flow_id;
/*
* The maximum value of flow_id that can be supported in
* completion records.
*/
uint32_t max_hw_ring_grps;
/*
* The maximum number of HW ring groups that can be supported on
* this function.
*/
uint16_t max_sp_tx_rings;
/*
* The maximum number of strict priority transmit rings that can
* be allocated to the function. This number indicates the
* maximum number of TX rings that can be assigned strict
* priorities out of the maximum number of TX rings that can be
* allocated (max_tx_rings) to the function.
*/
uint8_t unused_0;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_func_qcfg */
/*
* Description: This command returns the current configuration of a function.
* The input FID value is used to indicate what function is being queried. This
* allows a physical function driver to query virtual functions that are
* children of the physical function. The output FID value is needed to
* configure Rings and MSI-X vectors so their DMA operations appear correctly on
* the PCI bus. This command should be called by every driver after
* 'hwrm_func_cfg' to get the actual number of resources allocated by the HWRM.
* The values returned by hwrm_func_qcfg are the values the driver shall use.
* These values may be different than what was originally requested in the
* 'hwrm_func_cfg' command.
*/
/* Input (24 bytes) */
struct hwrm_func_qcfg_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint16_t fid;
/*
* Function ID of the function that is being queried. 0xFF...
* (All Fs) if the query is for the requesting function.
*/
uint16_t unused_0[3];
} __attribute__((packed));
/* Output (72 bytes) */
struct hwrm_func_qcfg_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint16_t fid;
/*
* FID value. This value is used to identify operations on the
* PCI bus as belonging to a particular PCI function.
*/
uint16_t port_id;
/*
* Port ID of port that this function is associated with.
* 0xFF... (All Fs) if this function is not associated with any
* port.
*/
uint16_t vlan;
/*
* This value is the current VLAN setting for this function. The
* value of 0 for this field indicates no priority tagging or
* VLAN is used. This field's format is same as 802.1Q Tag's Tag
* Control Information (TCI) format that includes both Priority
* Code Point (PCP) and VLAN Identifier (VID).
*/
uint16_t flags;
/*
* If 1, then magic packet based Out-Of-Box WoL is enabled on
* the port associated with this function.
*/
#define HWRM_FUNC_QCFG_OUTPUT_FLAGS_OOB_WOL_MAGICPKT_ENABLED \
UINT32_C(0x1)
/*
* If 1, then bitmap pattern based Out-Of-Box WoL packet is
* enabled on the port associated with this function.
*/
#define HWRM_FUNC_QCFG_OUTPUT_FLAGS_OOB_WOL_BMP_ENABLED UINT32_C(0x2)
/*
* If set to 1, then FW based DCBX agent is enabled and running
* on the port associated with this function. If set to 0, then
* DCBX agent is not running in the firmware.
*/
#define HWRM_FUNC_QCFG_OUTPUT_FLAGS_FW_DCBX_AGENT_ENABLED \
UINT32_C(0x4)
/*
* Standard TX Ring mode is used for the allocation of TX ring
* and underlying scheduling resources that allow bandwidth
* reservation and limit settings on the queried function. If
* set to 1, then standard TX ring mode is enabled on the
* queried function. If set to 0, then the standard TX ring mode
* is disabled on the queried function. In this extended TX ring
* resource mode, the minimum and maximum bandwidth settings are
* not supported to allow the allocation of TX rings to span
* multiple scheduler nodes.
*/
#define HWRM_FUNC_QCFG_OUTPUT_FLAGS_STD_TX_RING_MODE_ENABLED \
UINT32_C(0x8)
/*
* If set to 1 then FW based LLDP agent is enabled and running
* on the port associated with this function. If set to 0 then
* the LLDP agent is not running in the firmware.
*/
#define HWRM_FUNC_QCFG_OUTPUT_FLAGS_FW_LLDP_AGENT_ENABLED UINT32_C(0x10)
/*
* If set to 1, then multi-host mode is active for this
* function. If set to 0, then multi-host mode is inactive for
* this function or not applicable for this device.
*/
#define HWRM_FUNC_QCFG_OUTPUT_FLAGS_MULTI_HOST UINT32_C(0x20)
uint8_t mac_address[6];
/*
* This value is current MAC address configured for this
* function. A value of 00-00-00-00-00-00 indicates no MAC
* address is currently configured.
*/
uint16_t pci_id;
/*
* This value is current PCI ID of this function. If ARI is
* enabled, then it is Bus Number (8b):Function Number(8b).
* Otherwise, it is Bus Number (8b):Device Number (4b):Function
* Number(4b).
*/
uint16_t alloc_rsscos_ctx;
/*
* The number of RSS/COS contexts currently allocated to the
* function.
*/
uint16_t alloc_cmpl_rings;
/*
* The number of completion rings currently allocated to the
* function. This does not include the rings allocated to any
* children functions if any.
*/
uint16_t alloc_tx_rings;
/*
* The number of transmit rings currently allocated to the
* function. This does not include the rings allocated to any
* children functions if any.
*/
uint16_t alloc_rx_rings;
/*
* The number of receive rings currently allocated to the
* function. This does not include the rings allocated to any
* children functions if any.
*/
uint16_t alloc_l2_ctx;
/* The allocated number of L2 contexts to the function. */
uint16_t alloc_vnics;
/* The allocated number of vnics to the function. */
uint16_t mtu;
/*
* The maximum transmission unit of the function. For rings
* allocated on this function, this default value is used if
* ring MTU is not specified.
*/
uint16_t mru;
/*
* The maximum receive unit of the function. For vnics allocated
* on this function, this default value is used if vnic MRU is
* not specified.
*/
uint16_t stat_ctx_id;
/* The statistics context assigned to a function. */
uint8_t port_partition_type;
/*
* The HWRM shall return Unknown value for this field when this
* command is used to query VF's configuration.
*/
/* Single physical function */
#define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_SPF UINT32_C(0x0)
/* Multiple physical functions */
#define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_MPFS UINT32_C(0x1)
/* Network Partitioning 1.0 */
#define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_0 UINT32_C(0x2)
/* Network Partitioning 1.5 */
#define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_5 UINT32_C(0x3)
/* Network Partitioning 2.0 */
#define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR2_0 UINT32_C(0x4)
/* Unknown */
#define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_UNKNOWN UINT32_C(0xff)
uint8_t port_pf_cnt;
/*
* This field will indicate number of physical functions on this
* port_partition. HWRM shall return unavail (i.e. value of 0)
* for this field when this command is used to query VF's
* configuration or from older firmware that doesn't support
* this field.
*/
/* number of PFs is not available */
#define HWRM_FUNC_QCFG_OUTPUT_PORT_PF_CNT_UNAVAIL UINT32_C(0x0)
uint16_t dflt_vnic_id;
/* The default VNIC ID assigned to a function that is being queried. */
uint16_t max_mtu_configured;
/*
* This value specifies the MAX MTU that can be configured by
* host drivers. This 'max_mtu_configure' can be HW max MTU or
* OEM applications specified value. Host drivers can't
* configure the MTU greater than this value. Host drivers
* should read this value prior to configuring the MTU. FW will
* fail the host request with MTU greater than
* 'max_mtu_configured'.
*/
uint32_t min_bw;
/*
* Minimum BW allocated for this function. The HWRM will
* translate this value into byte counter and time interval used
* for the scheduler inside the device. A value of 0 indicates
* the minimum bandwidth is not configured.
*/
/* The bandwidth value. */
#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_MASK UINT32_C(0xfffffff)
#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_SFT 0
/* The granularity of the value (bits or bytes). */
#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE UINT32_C(0x10000000)
/* Value is in bits. */
#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE_BITS (UINT32_C(0x0) << 28)
/* Value is in bytes. */
#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE_BYTES \
(UINT32_C(0x1) << 28)
#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE_LAST \
FUNC_QCFG_OUTPUT_MIN_BW_SCALE_BYTES
/* bw_value_unit is 3 b */
#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_MASK \
UINT32_C(0xe0000000)
#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_SFT 29
/* Value is in Mb or MB (base 10). */
#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_MEGA \
(UINT32_C(0x0) << 29)
/* Value is in Kb or KB (base 10). */
#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_KILO \
(UINT32_C(0x2) << 29)
/* Value is in bits or bytes. */
#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_BASE \
(UINT32_C(0x4) << 29)
/* Value is in Gb or GB (base 10). */
#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_GIGA \
(UINT32_C(0x6) << 29)
/* Value is in 1/100th of a percentage of total bandwidth. */
#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
(UINT32_C(0x1) << 29)
/* Invalid unit */
#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_INVALID \
(UINT32_C(0x7) << 29)
#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_LAST \
FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_INVALID
uint32_t max_bw;
/*
* Maximum BW allocated for this function. The HWRM will
* translate this value into byte counter and time interval used
* for the scheduler inside the device. A value of 0 indicates
* that the maximum bandwidth is not configured.
*/
/* The bandwidth value. */
#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_MASK UINT32_C(0xfffffff)
#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_SFT 0
/* The granularity of the value (bits or bytes). */
#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE UINT32_C(0x10000000)
/* Value is in bits. */
#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE_BITS (UINT32_C(0x0) << 28)
/* Value is in bytes. */
#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE_BYTES \
(UINT32_C(0x1) << 28)
#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE_LAST \
FUNC_QCFG_OUTPUT_MAX_BW_SCALE_BYTES
/* bw_value_unit is 3 b */
#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_MASK \
UINT32_C(0xe0000000)
#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_SFT 29
/* Value is in Mb or MB (base 10). */
#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_MEGA \
(UINT32_C(0x0) << 29)
/* Value is in Kb or KB (base 10). */
#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_KILO \
(UINT32_C(0x2) << 29)
/* Value is in bits or bytes. */
#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_BASE \
(UINT32_C(0x4) << 29)
/* Value is in Gb or GB (base 10). */
#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_GIGA \
(UINT32_C(0x6) << 29)
/* Value is in 1/100th of a percentage of total bandwidth. */
#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
(UINT32_C(0x1) << 29)
/* Invalid unit */
#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_INVALID \
(UINT32_C(0x7) << 29)
#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_LAST \
FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_INVALID
uint8_t evb_mode;
/*
* This value indicates the Edge virtual bridge mode for the
* domain that this function belongs to.
*/
/* No Edge Virtual Bridging (EVB) */
#define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_NO_EVB UINT32_C(0x0)
/* Virtual Ethernet Bridge (VEB) */
#define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_VEB UINT32_C(0x1)
/* Virtual Ethernet Port Aggregator (VEPA) */
#define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_VEPA UINT32_C(0x2)
uint8_t unused_0;
uint16_t alloc_vfs;
/*
* The number of VFs that are allocated to the function. This is
* valid only on the PF with SR-IOV enabled. 0xFF... (All Fs) if
* this command is called on a PF with SR-IOV disabled or on a
* VF.
*/
uint32_t alloc_mcast_filters;
/*
* The number of allocated multicast filters for this function
* on the RX side.
*/
uint32_t alloc_hw_ring_grps;
/* The number of allocated HW ring groups for this function. */
uint16_t alloc_sp_tx_rings;
/*
* The number of strict priority transmit rings out of currently
* allocated TX rings to the function (alloc_tx_rings).
*/
uint8_t unused_1;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_func_vlan_qcfg */
/*
* Description: This command should be called by PF driver to get the current
* C-TAG, S-TAG and correcponsing PCP and TPID values configured for the
* function.
*/
/* Input (24 bytes) */
struct hwrm_func_vlan_qcfg_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint16_t fid;
/*
* Function ID of the function that is being configured. If set
* to 0xFF... (All Fs), then the configuration is for the
* requesting function.
*/
uint16_t unused_0[3];
};
/* Output (40 bytes) */
struct hwrm_func_vlan_qcfg_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
uint16_t stag_vid;
/* S-TAG VLAN identifier configured for the function. */
uint8_t stag_pcp;
/* S-TAG PCP value configured for the function. */
uint8_t unused_4;
uint16_t stag_tpid;
/*
* S-TAG TPID value configured for the function. This field is
* specified in network byte order.
*/
uint16_t ctag_vid;
/* C-TAG VLAN identifier configured for the function. */
uint8_t ctag_pcp;
/* C-TAG PCP value configured for the function. */
uint8_t unused_5;
uint16_t ctag_tpid;
/*
* C-TAG TPID value configured for the function. This field is
* specified in network byte order.
*/
uint32_t rsvd2;
/* Future use. */
uint32_t rsvd3;
/* Future use. */
uint32_t unused_6;
};
/* hwrm_func_vlan_cfg */
/*
* Description: This command allows PF driver to configure C-TAG, S-TAG and
* corresponding PCP and TPID values for a function.
*/
/* Input (48 bytes) */
struct hwrm_func_vlan_cfg_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint16_t fid;
/*
* Function ID of the function that is being configured. If set
* to 0xFF... (All Fs), then the configuration is for the
* requesting function.
*/
uint8_t unused_0;
uint8_t unused_1;
uint32_t enables;
/* This bit must be '1' for the stag_vid field to be configured. */
#define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_STAG_VID UINT32_C(0x1)
/* This bit must be '1' for the ctag_vid field to be configured. */
#define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_CTAG_VID UINT32_C(0x2)
/* This bit must be '1' for the stag_pcp field to be configured. */
#define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_STAG_PCP UINT32_C(0x4)
/* This bit must be '1' for the ctag_pcp field to be configured. */
#define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_CTAG_PCP UINT32_C(0x8)
/* This bit must be '1' for the stag_tpid field to be configured. */
#define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_STAG_TPID UINT32_C(0x10)
/* This bit must be '1' for the ctag_tpid field to be configured. */
#define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_CTAG_TPID UINT32_C(0x20)
uint16_t stag_vid;
/* S-TAG VLAN identifier configured for the function. */
uint8_t stag_pcp;
/* S-TAG PCP value configured for the function. */
uint8_t unused_2;
uint16_t stag_tpid;
/*
* S-TAG TPID value configured for the function. This field is
* specified in network byte order.
*/
uint16_t ctag_vid;
/* C-TAG VLAN identifier configured for the function. */
uint8_t ctag_pcp;
/* C-TAG PCP value configured for the function. */
uint8_t unused_3;
uint16_t ctag_tpid;
/*
* C-TAG TPID value configured for the function. This field is
* specified in network byte order.
*/
uint32_t rsvd1;
/* Future use. */
uint32_t rsvd2;
/* Future use. */
uint32_t unused_4;
};
/* Output (16 bytes) */
struct hwrm_func_vlan_cfg_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
};
/* hwrm_func_cfg */
/*
* Description: This command allows configuration of a PF by the corresponding
* PF driver. This command also allows configuration of a child VF by its parent
* PF driver. The input FID value is used to indicate what function is being
* configured. This allows a PF driver to configure the PF owned by itself or a
* virtual function that is a child of the PF. This command allows to reserve
* resources for a VF by its parent PF. To reverse the process, the command
* should be called with all enables flags cleared for resources. This will free
* allocated resources for the VF and return them to the resource pool. If this
* command is requested by a VF driver to configure or reserve resources, then
* the HWRM shall fail this command. If default MAC address and/or VLAN are
* provided in this command, then the HWRM shall set up appropriate MAC/VLAN
* filters for the function that is being configured. If source properties
* checks are enabled and default MAC address and/or IP address are provided in
* this command, then the HWRM shall set appropriate source property checks
* based on provided MAC and/or IP addresses. The parent PF driver should not
* set MTU/MRU for a VF using this command. This is to allow MTU/MRU setting by
* the VF driver. If the MTU or MRU for a VF is set by the PF driver, then the
* HWRM should ignore it. A function's MTU/MRU should be set prior to allocating
* RX VNICs or TX rings. A PF driver calls hwrm_func_cfg to allocate resources
* for itself or its children VFs. All function drivers shall call hwrm_func_cfg
* to reserve resources. A request to hwrm_func_cfg may not be fully granted;
* that is, a request for resources may be larger than what can be supported by
* the device and the HWRM will allocate the best set of resources available,
* but that may be less than requested. If all the amounts requested could not
* be fulfilled, the HWRM shall allocate what it could and return a status code
* of success. A function driver should call hwrm_func_qcfg immediately after
* hwrm_func_cfg to determine what resources were assigned to the configured
* function. A call by a PF driver to hwrm_func_cfg to allocate resources for
* itself shall only allocate resources for the PF driver to use, not for its
* children VFs. Likewise, a call to hwrm_func_qcfg shall return the resources
* available for the PF driver to use, not what is available to its children
* VFs.
*/
/* Input (88 bytes) */
struct hwrm_func_cfg_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint16_t fid;
/*
* Function ID of the function that is being configured. If set
* to 0xFF... (All Fs), then the configuration is for the
* requesting function.
*/
uint8_t unused_0;
uint8_t unused_1;
uint32_t flags;
/*
* When this bit is '1', the function is disabled with source
* MAC address check. This is an anti-spoofing check. If this
* flag is set, then the function shall be configured to
* disallow transmission of frames with the source MAC address
* that is configured for this function.
*/
#define HWRM_FUNC_CFG_INPUT_FLAGS_SRC_MAC_ADDR_CHECK_DISABLE \
UINT32_C(0x1)
/*
* When this bit is '1', the function is enabled with source MAC
* address check. This is an anti-spoofing check. If this flag
* is set, then the function shall be configured to allow
* transmission of frames with the source MAC address that is
* configured for this function.
*/
#define HWRM_FUNC_CFG_INPUT_FLAGS_SRC_MAC_ADDR_CHECK_ENABLE \
UINT32_C(0x2)
/* reserved */
#define HWRM_FUNC_CFG_INPUT_FLAGS_RSVD_MASK UINT32_C(0x1fc)
#define HWRM_FUNC_CFG_INPUT_FLAGS_RSVD_SFT 2
/*
* Standard TX Ring mode is used for the allocation of TX ring
* and underlying scheduling resources that allow bandwidth
* reservation and limit settings on the queried function. If
* set to 1, then standard TX ring mode is requested to be
* enabled on the function being configured.
*/
#define HWRM_FUNC_CFG_INPUT_FLAGS_STD_TX_RING_MODE_ENABLE \
UINT32_C(0x200)
/*
* Standard TX Ring mode is used for the allocation of TX ring
* and underlying scheduling resources that allow bandwidth
* reservation and limit settings on the queried function. If
* set to 1, then the standard TX ring mode is requested to be
* disabled on the function being configured. In this extended
* TX ring resource mode, the minimum and maximum bandwidth
* settings are not supported to allow the allocation of TX
* rings to span multiple scheduler nodes.
*/
#define HWRM_FUNC_CFG_INPUT_FLAGS_STD_TX_RING_MODE_DISABLE \
UINT32_C(0x400)
/*
* If this bit is set, virtual mac address configured in this
* command will be persistent over warm boot.
*/
#define HWRM_FUNC_CFG_INPUT_FLAGS_VIRT_MAC_PERSIST UINT32_C(0x800)
/*
* This bit only applies to the VF. If this bit is set, the
* statistic context counters will not be cleared when the
* statistic context is freed or a function reset is called on
* VF. This bit will be cleared when the PF is unloaded or a
* function reset is called on the PF.
*/
#define HWRM_FUNC_CFG_INPUT_FLAGS_NO_AUTOCLEAR_STATISTIC \
UINT32_C(0x1000)
/*
* This bit requests that the firmware test to see if all the
* assets requested in this command (i.e. number of TX rings)
* are available. The firmware will return an error if the
* requested assets are not available. The firwmare will NOT
* reserve the assets if they are available.
*/
#define HWRM_FUNC_CFG_INPUT_FLAGS_TX_ASSETS_TEST UINT32_C(0x2000)
uint32_t enables;
/* This bit must be '1' for the mtu field to be configured. */
#define HWRM_FUNC_CFG_INPUT_ENABLES_MTU UINT32_C(0x1)
/* This bit must be '1' for the mru field to be configured. */
#define HWRM_FUNC_CFG_INPUT_ENABLES_MRU UINT32_C(0x2)
/*
* This bit must be '1' for the num_rsscos_ctxs field to be
* configured.
*/
#define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_RSSCOS_CTXS UINT32_C(0x4)
/*
* This bit must be '1' for the num_cmpl_rings field to be
* configured.
*/
#define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_CMPL_RINGS UINT32_C(0x8)
/* This bit must be '1' for the num_tx_rings field to be configured. */
#define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_TX_RINGS UINT32_C(0x10)
/* This bit must be '1' for the num_rx_rings field to be configured. */
#define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_RX_RINGS UINT32_C(0x20)
/* This bit must be '1' for the num_l2_ctxs field to be configured. */
#define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_L2_CTXS UINT32_C(0x40)
/* This bit must be '1' for the num_vnics field to be configured. */
#define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_VNICS UINT32_C(0x80)
/*
* This bit must be '1' for the num_stat_ctxs field to be
* configured.
*/
#define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_STAT_CTXS UINT32_C(0x100)
/*
* This bit must be '1' for the dflt_mac_addr field to be
* configured.
*/
#define HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_MAC_ADDR UINT32_C(0x200)
/* This bit must be '1' for the dflt_vlan field to be configured. */
#define HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_VLAN UINT32_C(0x400)
/* This bit must be '1' for the dflt_ip_addr field to be configured. */
#define HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_IP_ADDR UINT32_C(0x800)
/* This bit must be '1' for the min_bw field to be configured. */
#define HWRM_FUNC_CFG_INPUT_ENABLES_MIN_BW UINT32_C(0x1000)
/* This bit must be '1' for the max_bw field to be configured. */
#define HWRM_FUNC_CFG_INPUT_ENABLES_MAX_BW UINT32_C(0x2000)
/*
* This bit must be '1' for the async_event_cr field to be
* configured.
*/
#define HWRM_FUNC_CFG_INPUT_ENABLES_ASYNC_EVENT_CR UINT32_C(0x4000)
/*
* This bit must be '1' for the vlan_antispoof_mode field to be
* configured.
*/
#define HWRM_FUNC_CFG_INPUT_ENABLES_VLAN_ANTISPOOF_MODE UINT32_C(0x8000)
/*
* This bit must be '1' for the allowed_vlan_pris field to be
* configured.
*/
#define HWRM_FUNC_CFG_INPUT_ENABLES_ALLOWED_VLAN_PRIS UINT32_C(0x10000)
/* This bit must be '1' for the evb_mode field to be configured. */
#define HWRM_FUNC_CFG_INPUT_ENABLES_EVB_MODE UINT32_C(0x20000)
/*
* This bit must be '1' for the num_mcast_filters field to be
* configured.
*/
#define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_MCAST_FILTERS UINT32_C(0x40000)
/*
* This bit must be '1' for the num_hw_ring_grps field to be
* configured.
*/
#define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_HW_RING_GRPS UINT32_C(0x80000)
uint16_t mtu;
/*
* The maximum transmission unit of the function. The HWRM
* should make sure that the mtu of the function does not exceed
* the mtu of the physical port that this function is associated
* with. In addition to configuring mtu per function, it is
* possible to configure mtu per transmit ring. By default, the
* mtu of each transmit ring associated with a function is equal
* to the mtu of the function. The HWRM should make sure that
* the mtu of each transmit ring that is assigned to a function
* has a valid mtu.
*/
uint16_t mru;
/*
* The maximum receive unit of the function. The HWRM should
* make sure that the mru of the function does not exceed the
* mru of the physical port that this function is associated
* with. In addition to configuring mru per function, it is
* possible to configure mru per vnic. By default, the mru of
* each vnic associated with a function is equal to the mru of
* the function. The HWRM should make sure that the mru of each
* vnic that is assigned to a function has a valid mru.
*/
uint16_t num_rsscos_ctxs;
/* The number of RSS/COS contexts requested for the function. */
uint16_t num_cmpl_rings;
/*
* The number of completion rings requested for the function.
* This does not include the rings allocated to any children
* functions if any.
*/
uint16_t num_tx_rings;
/*
* The number of transmit rings requested for the function. This
* does not include the rings allocated to any children
* functions if any.
*/
uint16_t num_rx_rings;
/*
* The number of receive rings requested for the function. This
* does not include the rings allocated to any children
* functions if any.
*/
uint16_t num_l2_ctxs;
/* The requested number of L2 contexts for the function. */
uint16_t num_vnics;
/* The requested number of vnics for the function. */
uint16_t num_stat_ctxs;
/* The requested number of statistic contexts for the function. */
uint16_t num_hw_ring_grps;
/*
* The number of HW ring groups that should be reserved for this
* function.
*/
uint8_t dflt_mac_addr[6];
/* The default MAC address for the function being configured. */
uint16_t dflt_vlan;
/*
* The default VLAN for the function being configured. This
* field's format is same as 802.1Q Tag's Tag Control
* Information (TCI) format that includes both Priority Code
* Point (PCP) and VLAN Identifier (VID).
*/
uint32_t dflt_ip_addr[4];
/*
* The default IP address for the function being configured.
* This address is only used in enabling source property check.
*/
uint32_t min_bw;
/*
* Minimum BW allocated for this function. The HWRM will
* translate this value into byte counter and time interval used
* for the scheduler inside the device.
*/
/* The bandwidth value. */
#define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_MASK UINT32_C(0xfffffff)
#define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_SFT 0
/* The granularity of the value (bits or bytes). */
#define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE UINT32_C(0x10000000)
/* Value is in bits. */
#define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_BITS (UINT32_C(0x0) << 28)
/* Value is in bytes. */
#define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_BYTES (UINT32_C(0x1) << 28)
#define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_LAST \
FUNC_CFG_INPUT_MIN_BW_SCALE_BYTES
/* bw_value_unit is 3 b */
#define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_MASK \
UINT32_C(0xe0000000)
#define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_SFT 29
/* Value is in Mb or MB (base 10). */
#define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_MEGA \
(UINT32_C(0x0) << 29)
/* Value is in Kb or KB (base 10). */
#define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_KILO \
(UINT32_C(0x2) << 29)
/* Value is in bits or bytes. */
#define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_BASE \
(UINT32_C(0x4) << 29)
/* Value is in Gb or GB (base 10). */
#define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_GIGA \
(UINT32_C(0x6) << 29)
/* Value is in 1/100th of a percentage of total bandwidth. */
#define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
(UINT32_C(0x1) << 29)
/* Invalid unit */
#define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_INVALID \
(UINT32_C(0x7) << 29)
#define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_LAST \
FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_INVALID
uint32_t max_bw;
/*
* Maximum BW allocated for this function. The HWRM will
* translate this value into byte counter and time interval used
* for the scheduler inside the device.
*/
/* The bandwidth value. */
#define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_MASK \
UINT32_C(0xfffffff)
#define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_SFT 0
/* The granularity of the value (bits or bytes). */
#define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE UINT32_C(0x10000000)
/* Value is in bits. */
#define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_BITS (UINT32_C(0x0) << 28)
/* Value is in bytes. */
#define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_BYTES (UINT32_C(0x1) << 28)
#define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_LAST \
FUNC_CFG_INPUT_MAX_BW_SCALE_BYTES
/* bw_value_unit is 3 b */
#define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_MASK \
UINT32_C(0xe0000000)
#define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_SFT 29
/* Value is in Mb or MB (base 10). */
#define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_MEGA \
(UINT32_C(0x0) << 29)
/* Value is in Kb or KB (base 10). */
#define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_KILO \
(UINT32_C(0x2) << 29)
/* Value is in bits or bytes. */
#define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_BASE \
(UINT32_C(0x4) << 29)
/* Value is in Gb or GB (base 10). */
#define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_GIGA \
(UINT32_C(0x6) << 29)
/* Value is in 1/100th of a percentage of total bandwidth. */
#define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
(UINT32_C(0x1) << 29)
/* Invalid unit */
#define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID \
(UINT32_C(0x7) << 29)
#define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_LAST \
FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID
uint16_t async_event_cr;
/*
* ID of the target completion ring for receiving asynchronous
* event completions. If this field is not valid, then the HWRM
* shall use the default completion ring of the function that is
* being configured as the target completion ring for providing
* any asynchronous event completions for that function. If this
* field is valid, then the HWRM shall use the completion ring
* identified by this ID as the target completion ring for
* providing any asynchronous event completions for the function
* that is being configured.
*/
uint8_t vlan_antispoof_mode;
/* VLAN Anti-spoofing mode. */
/* No VLAN anti-spoofing checks are enabled */
#define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_NOCHECK UINT32_C(0x0)
/* Validate VLAN against the configured VLAN(s) */
#define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_VALIDATE_VLAN \
UINT32_C(0x1)
/* Insert VLAN if it does not exist, otherwise discard */
#define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_INSERT_IF_VLANDNE \
UINT32_C(0x2)
/*
* Insert VLAN if it does not exist, override
* VLAN if it exists
*/
#define \
HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_INSERT_OR_OVERRIDE_VLAN \
UINT32_C(0x3)
uint8_t allowed_vlan_pris;
/*
* This bit field defines VLAN PRIs that are allowed on this
* function. If nth bit is set, then VLAN PRI n is allowed on
* this function.
*/
uint8_t evb_mode;
/*
* The HWRM shall allow a PF driver to change EVB mode for the
* partition it belongs to. The HWRM shall not allow a VF driver
* to change the EVB mode. The HWRM shall take into account the
* switching of EVB mode from one to another and reconfigure
* hardware resources as appropriately. The switching from VEB
* to VEPA mode requires the disabling of the loopback traffic.
* Additionally, source knock outs are handled differently in
* VEB and VEPA modes.
*/
/* No Edge Virtual Bridging (EVB) */
#define HWRM_FUNC_CFG_INPUT_EVB_MODE_NO_EVB UINT32_C(0x0)
/* Virtual Ethernet Bridge (VEB) */
#define HWRM_FUNC_CFG_INPUT_EVB_MODE_VEB UINT32_C(0x1)
/* Virtual Ethernet Port Aggregator (VEPA) */
#define HWRM_FUNC_CFG_INPUT_EVB_MODE_VEPA UINT32_C(0x2)
uint8_t unused_2;
uint16_t num_mcast_filters;
/*
* The number of multicast filters that should be reserved for
* this function on the RX side.
*/
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_func_cfg_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_func_qstats */
/*
* Description: This command returns statistics of a function. The input FID
* value is used to indicate what function is being queried. This allows a
* physical function driver to query virtual functions that are children of the
* physical function. The HWRM shall return any unsupported counter with a value
* of 0xFFFFFFFF for 32-bit counters and 0xFFFFFFFFFFFFFFFF for 64-bit counters.
*/
/* Input (24 bytes) */
struct hwrm_func_qstats_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint16_t fid;
/*
* Function ID of the function that is being queried. 0xFF...
* (All Fs) if the query is for the requesting function.
*/
uint16_t unused_0[3];
} __attribute__((packed));
/* Output (176 bytes) */
struct hwrm_func_qstats_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint64_t tx_ucast_pkts;
/* Number of transmitted unicast packets on the function. */
uint64_t tx_mcast_pkts;
/* Number of transmitted multicast packets on the function. */
uint64_t tx_bcast_pkts;
/* Number of transmitted broadcast packets on the function. */
uint64_t tx_err_pkts;
/*
* Number of transmitted packets that were discarded due to
* internal NIC resource problems. For transmit, this can only
* happen if TMP is configured to allow dropping in HOL blocking
* conditions, which is not a normal configuration.
*/
uint64_t tx_drop_pkts;
/*
* Number of dropped packets on transmit path on the function.
* These are packets that have been marked for drop by the TE
* CFA block or are packets that exceeded the transmit MTU limit
* for the function.
*/
uint64_t tx_ucast_bytes;
/* Number of transmitted bytes for unicast traffic on the function. */
uint64_t tx_mcast_bytes;
/*
* Number of transmitted bytes for multicast traffic on the
* function.
*/
uint64_t tx_bcast_bytes;
/*
* Number of transmitted bytes for broadcast traffic on the
* function.
*/
uint64_t rx_ucast_pkts;
/* Number of received unicast packets on the function. */
uint64_t rx_mcast_pkts;
/* Number of received multicast packets on the function. */
uint64_t rx_bcast_pkts;
/* Number of received broadcast packets on the function. */
uint64_t rx_err_pkts;
/*
* Number of received packets that were discarded on the
* function due to resource limitations. This can happen for 3
* reasons. # The BD used for the packet has a bad format. #
* There were no BDs available in the ring for the packet. #
* There were no BDs available on-chip for the packet.
*/
uint64_t rx_drop_pkts;
/*
* Number of dropped packets on received path on the function.
* These are packets that have been marked for drop by the RE
* CFA.
*/
uint64_t rx_ucast_bytes;
/* Number of received bytes for unicast traffic on the function. */
uint64_t rx_mcast_bytes;
/* Number of received bytes for multicast traffic on the function. */
uint64_t rx_bcast_bytes;
/* Number of received bytes for broadcast traffic on the function. */
uint64_t rx_agg_pkts;
/* Number of aggregated unicast packets on the function. */
uint64_t rx_agg_bytes;
/* Number of aggregated unicast bytes on the function. */
uint64_t rx_agg_events;
/* Number of aggregation events on the function. */
uint64_t rx_agg_aborts;
/* Number of aborted aggregations on the function. */
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_func_clr_stats */
/*
* Description: This command clears statistics of a function. The input FID
* value is used to indicate what function's statistics is being cleared. This
* allows a physical function driver to clear statistics of virtual functions
* that are children of the physical function.
*/
/* Input (24 bytes) */
struct hwrm_func_clr_stats_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint16_t fid;
/*
* Function ID of the function. 0xFF... (All Fs) if the query is
* for the requesting function.
*/
uint16_t unused_0[3];
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_func_clr_stats_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_func_vf_vnic_ids_query */
/* Description: This command is used to query vf vnic ids. */
/* Input (32 bytes) */
struct hwrm_func_vf_vnic_ids_query_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint16_t vf_id;
/*
* This value is used to identify a Virtual Function (VF). The
* scope of VF ID is local within a PF.
*/
uint8_t unused_0;
uint8_t unused_1;
uint32_t max_vnic_id_cnt;
/* Max number of vnic ids in vnic id table */
uint64_t vnic_id_tbl_addr;
/* This is the address for VF VNIC ID table */
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_func_vf_vnic_ids_query_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t vnic_id_cnt;
/*
* Actual number of vnic ids Each VNIC ID is written as a 32-bit
* number.
*/
uint8_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_func_drv_rgtr */
/*
* Description: This command is used by the function driver to register its
* information with the HWRM. A function driver shall implement this command. A
* function driver shall use this command during the driver initialization right
* after the HWRM version discovery and default ring resources allocation.
*/
/* Input (80 bytes) */
struct hwrm_func_drv_rgtr_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint32_t flags;
/*
* When this bit is '1', the function driver is requesting all
* requests from its children VF drivers to be forwarded to
* itself. This flag can only be set by the PF driver. If a VF
* driver sets this flag, it should be ignored by the HWRM.
*/
#define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FWD_ALL_MODE UINT32_C(0x1)
/*
* When this bit is '1', the function is requesting none of the
* requests from its children VF drivers to be forwarded to
* itself. This flag can only be set by the PF driver. If a VF
* driver sets this flag, it should be ignored by the HWRM.
*/
#define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FWD_NONE_MODE UINT32_C(0x2)
uint32_t enables;
/* This bit must be '1' for the os_type field to be configured. */
#define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_OS_TYPE UINT32_C(0x1)
/* This bit must be '1' for the ver field to be configured. */
#define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VER UINT32_C(0x2)
/* This bit must be '1' for the timestamp field to be configured. */
#define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_TIMESTAMP UINT32_C(0x4)
/* This bit must be '1' for the vf_req_fwd field to be configured. */
#define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VF_INPUT_FWD UINT32_C(0x8)
/*
* This bit must be '1' for the async_event_fwd field to be
* configured.
*/
#define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_ASYNC_EVENT_FWD UINT32_C(0x10)
uint16_t os_type;
/*
* This value indicates the type of OS. The values are based on
* CIM_OperatingSystem.mof file as published by the DMTF.
*/
/* Unknown */
#define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_UNKNOWN UINT32_C(0x0)
/* Other OS not listed below. */
#define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_OTHER UINT32_C(0x1)
/* MSDOS OS. */
#define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_MSDOS UINT32_C(0xe)
/* Windows OS. */
#define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WINDOWS UINT32_C(0x12)
/* Solaris OS. */
#define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_SOLARIS UINT32_C(0x1d)
/* Linux OS. */
#define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_LINUX UINT32_C(0x24)
/* FreeBSD OS. */
#define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_FREEBSD UINT32_C(0x2a)
/* VMware ESXi OS. */
#define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_ESXI UINT32_C(0x68)
/* Microsoft Windows 8 64-bit OS. */
#define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WIN864 UINT32_C(0x73)
/* Microsoft Windows Server 2012 R2 OS. */
#define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WIN2012R2 UINT32_C(0x74)
uint8_t ver_maj;
/* This is the major version of the driver. */
uint8_t ver_min;
/* This is the minor version of the driver. */
uint8_t ver_upd;
/* This is the update version of the driver. */
uint8_t unused_0;
uint16_t unused_1;
uint32_t timestamp;
/*
* This is a 32-bit timestamp provided by the driver for keep
* alive. The timestamp is in multiples of 1ms.
*/
uint32_t unused_2;
uint32_t vf_req_fwd[8];
/*
* This is a 256-bit bit mask provided by the PF driver for
* letting the HWRM know what commands issued by the VF driver
* to the HWRM should be forwarded to the PF driver. Nth bit
* refers to the Nth req_type. Setting Nth bit to 1 indicates
* that requests from the VF driver with req_type equal to N
* shall be forwarded to the parent PF driver. This field is not
* valid for the VF driver.
*/
uint32_t async_event_fwd[8];
/*
* This is a 256-bit bit mask provided by the function driver
* (PF or VF driver) to indicate the list of asynchronous event
* completions to be forwarded. Nth bit refers to the Nth
* event_id. Setting Nth bit to 1 by the function driver shall
* result in the HWRM forwarding asynchronous event completion
* with event_id equal to N. If all bits are set to 0 (value of
* 0), then the HWRM shall not forward any asynchronous event
* completion to this function driver.
*/
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_func_drv_rgtr_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_func_drv_unrgtr */
/*
* Description: This command is used by the function driver to un register with
* the HWRM. A function driver shall implement this command. A function driver
* shall use this command during the driver unloading.
*/
/* Input (24 bytes) */
struct hwrm_func_drv_unrgtr_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint32_t flags;
/*
* When this bit is '1', the function driver is notifying the
* HWRM to prepare for the shutdown.
*/
#define HWRM_FUNC_DRV_UNRGTR_INPUT_FLAGS_PREPARE_FOR_SHUTDOWN \
UINT32_C(0x1)
uint32_t unused_0;
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_func_drv_unrgtr_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_func_buf_rgtr */
/*
* Description: This command is used by the PF driver to register buffers used
* in the PF-VF communication with the HWRM. The PF driver uses this command to
* register buffers for each PF-VF channel. A parent PF may issue this command
* per child VF. If VF ID is not valid, then this command is used to register
* buffers for all children VFs of the PF.
*/
/* Input (128 bytes) */
struct hwrm_func_buf_rgtr_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint32_t enables;
/* This bit must be '1' for the vf_id field to be configured. */
#define HWRM_FUNC_BUF_RGTR_INPUT_ENABLES_VF_ID UINT32_C(0x1)
/* This bit must be '1' for the err_buf_addr field to be configured. */
#define HWRM_FUNC_BUF_RGTR_INPUT_ENABLES_ERR_BUF_ADDR UINT32_C(0x2)
uint16_t vf_id;
/*
* This value is used to identify a Virtual Function (VF). The
* scope of VF ID is local within a PF.
*/
uint16_t req_buf_num_pages;
/*
* This field represents the number of pages used for request
* buffer(s).
*/
uint16_t req_buf_page_size;
/* This field represents the page size used for request buffer(s). */
/* 16 bytes */
#define HWRM_FUNC_BUF_RGTR_INPUT_INPUT_BUF_PAGE_SIZE_16B UINT32_C(0x4)
/* 4 Kbytes */
#define HWRM_FUNC_BUF_RGTR_INPUT_INPUT_BUF_PAGE_SIZE_4K UINT32_C(0xc)
/* 8 Kbytes */
#define HWRM_FUNC_BUF_RGTR_INPUT_INPUT_BUF_PAGE_SIZE_8K UINT32_C(0xd)
/* 64 Kbytes */
#define HWRM_FUNC_BUF_RGTR_INPUT_INPUT_BUF_PAGE_SIZE_64K UINT32_C(0x10)
/* 2 Mbytes */
#define HWRM_FUNC_BUF_RGTR_INPUT_INPUT_BUF_PAGE_SIZE_2M UINT32_C(0x15)
/* 4 Mbytes */
#define HWRM_FUNC_BUF_RGTR_INPUT_INPUT_BUF_PAGE_SIZE_4M UINT32_C(0x16)
/* 1 Gbytes */
#define HWRM_FUNC_BUF_RGTR_INPUT_INPUT_BUF_PAGE_SIZE_1G UINT32_C(0x1e)
uint16_t req_buf_len;
/* The length of the request buffer per VF in bytes. */
uint16_t resp_buf_len;
/* The length of the response buffer in bytes. */
uint8_t unused_0;
uint8_t unused_1;
uint64_t req_buf_page_addr[10];
/* This field represents the page address of req buffer. */
uint64_t error_buf_addr;
/*
* This field is used to receive the error reporting from the
* chipset. Only applicable for PFs.
*/
uint64_t resp_buf_addr;
/* This field is used to receive the response forwarded by the HWRM. */
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_func_buf_rgtr_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_func_buf_unrgtr */
/*
* Description: This command is used by the PF driver to unregister buffers used
* in the PF-VF communication with the HWRM. The PF driver uses this command to
* unregister buffers for PF-VF communication. A parent PF may issue this
* command to unregister buffers for communication between the PF and a specific
* VF. If the VF ID is not valid, then this command is used to unregister
* buffers used for communications with all children VFs of the PF.
*/
/* Input (24 bytes) */
struct hwrm_func_buf_unrgtr_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint32_t enables;
/* This bit must be '1' for the vf_id field to be configured. */
#define HWRM_FUNC_BUF_UNRGTR_INPUT_ENABLES_VF_ID UINT32_C(0x1)
uint16_t vf_id;
/*
* This value is used to identify a Virtual Function (VF). The
* scope of VF ID is local within a PF.
*/
uint16_t unused_0;
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_func_buf_unrgtr_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_port_phy_cfg */
/*
* Description: This command configures the PHY device for the port. It allows
* setting of the most generic settings for the PHY. The HWRM shall complete
* this command as soon as PHY settings are configured. They may not be applied
* when the command response is provided. A VF driver shall not be allowed to
* configure PHY using this command. In a network partition mode, a PF driver
* shall not be allowed to configure PHY using this command.
*/
/* Input (56 bytes) */
struct hwrm_port_phy_cfg_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint32_t flags;
/*
* When this bit is set to '1', the PHY for the port shall be
* reset. # If this bit is set to 1, then the HWRM shall reset
* the PHY after applying PHY configuration changes specified in
* this command. # In order to guarantee that PHY configuration
* changes specified in this command take effect, the HWRM
* client should set this flag to 1. # If this bit is not set to
* 1, then the HWRM may reset the PHY depending on the current
* PHY configuration and settings specified in this command.
*/
#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_RESET_PHY UINT32_C(0x1)
/* deprecated bit. Do not use!!! */
#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_DEPRECATED UINT32_C(0x2)
/*
* When this bit is set to '1', the link shall be forced to the
* force_link_speed value. When this bit is set to '1', the HWRM
* client should not enable any of the auto negotiation related
* fields represented by auto_XXX fields in this command. When
* this bit is set to '1' and the HWRM client has enabled a
* auto_XXX field in this command, then the HWRM shall ignore
* the enabled auto_XXX field. When this bit is set to zero, the
* link shall be allowed to autoneg.
*/
#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FORCE UINT32_C(0x4)
/*
* When this bit is set to '1', the auto-negotiation process
* shall be restarted on the link.
*/
#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_RESTART_AUTONEG UINT32_C(0x8)
/*
* When this bit is set to '1', Energy Efficient Ethernet (EEE)
* is requested to be enabled on this link. If EEE is not
* supported on this port, then this flag shall be ignored by
* the HWRM.
*/
#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_ENABLE UINT32_C(0x10)
/*
* When this bit is set to '1', Energy Efficient Ethernet (EEE)
* is requested to be disabled on this link. If EEE is not
* supported on this port, then this flag shall be ignored by
* the HWRM.
*/
#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_DISABLE UINT32_C(0x20)
/*
* When this bit is set to '1' and EEE is enabled on this link,
* then TX LPI is requested to be enabled on the link. If EEE is
* not supported on this port, then this flag shall be ignored
* by the HWRM. If EEE is disabled on this port, then this flag
* shall be ignored by the HWRM.
*/
#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_TX_LPI_ENABLE UINT32_C(0x40)
/*
* When this bit is set to '1' and EEE is enabled on this link,
* then TX LPI is requested to be disabled on the link. If EEE
* is not supported on this port, then this flag shall be
* ignored by the HWRM. If EEE is disabled on this port, then
* this flag shall be ignored by the HWRM.
*/
#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_TX_LPI_DISABLE UINT32_C(0x80)
/*
* When set to 1, then the HWRM shall enable FEC
* autonegotitation on this port if supported. When set to 0,
* then this flag shall be ignored. If FEC autonegotiation is
* not supported, then the HWRM shall ignore this flag.
*/
#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_AUTONEG_ENABLE UINT32_C(0x100)
/*
* When set to 1, then the HWRM shall disable FEC
* autonegotiation on this port if supported. When set to 0,
* then this flag shall be ignored. If FEC autonegotiation is
* not supported, then the HWRM shall ignore this flag.
*/
#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_AUTONEG_DISABLE \
UINT32_C(0x200)
/*
* When set to 1, then the HWRM shall enable FEC CLAUSE 74 (Fire
* Code) on this port if supported. When set to 0, then this
* flag shall be ignored. If FEC CLAUSE 74 is not supported,
* then the HWRM shall ignore this flag.
*/
#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE74_ENABLE \
UINT32_C(0x400)
/*
* When set to 1, then the HWRM shall disable FEC CLAUSE 74
* (Fire Code) on this port if supported. When set to 0, then
* this flag shall be ignored. If FEC CLAUSE 74 is not
* supported, then the HWRM shall ignore this flag.
*/
#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE74_DISABLE \
UINT32_C(0x800)
/*
* When set to 1, then the HWRM shall enable FEC CLAUSE 91 (Reed
* Solomon) on this port if supported. When set to 0, then this
* flag shall be ignored. If FEC CLAUSE 91 is not supported,
* then the HWRM shall ignore this flag.
*/
#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE91_ENABLE \
UINT32_C(0x1000)
/*
* When set to 1, then the HWRM shall disable FEC CLAUSE 91
* (Reed Solomon) on this port if supported. When set to 0, then
* this flag shall be ignored. If FEC CLAUSE 91 is not
* supported, then the HWRM shall ignore this flag.
*/
#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE91_DISABLE \
UINT32_C(0x2000)
/*
* When this bit is set to '1', the link shall be forced to be
* taken down. # When this bit is set to '1", all other command
* input settings related to the link speed shall be ignored.
* Once the link state is forced down, it can be explicitly
* cleared from that state by setting this flag to '0'. # If
* this flag is set to '0', then the link shall be cleared from
* forced down state if the link is in forced down state. There
* may be conditions (e.g. out-of-band or sideband configuration
* changes for the link) outside the scope of the HWRM
* implementation that may clear forced down link state.
*/
#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FORCE_LINK_DWN UINT32_C(0x4000)
uint32_t enables;
/* This bit must be '1' for the auto_mode field to be configured. */
#define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_MODE UINT32_C(0x1)
/* This bit must be '1' for the auto_duplex field to be configured. */
#define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_DUPLEX UINT32_C(0x2)
/* This bit must be '1' for the auto_pause field to be configured. */
#define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_PAUSE UINT32_C(0x4)
/*
* This bit must be '1' for the auto_link_speed field to be
* configured.
*/
#define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_LINK_SPEED UINT32_C(0x8)
/*
* This bit must be '1' for the auto_link_speed_mask field to be
* configured.
*/
#define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_LINK_SPEED_MASK \
UINT32_C(0x10)
/* This bit must be '1' for the wirespeed field to be configured. */
#define HWRM_PORT_PHY_CFG_INPUT_ENABLES_WIOUTPUTEED UINT32_C(0x20)
/* This bit must be '1' for the lpbk field to be configured. */
#define HWRM_PORT_PHY_CFG_INPUT_ENABLES_LPBK UINT32_C(0x40)
/* This bit must be '1' for the preemphasis field to be configured. */
#define HWRM_PORT_PHY_CFG_INPUT_ENABLES_PREEMPHASIS UINT32_C(0x80)
/* This bit must be '1' for the force_pause field to be configured. */
#define HWRM_PORT_PHY_CFG_INPUT_ENABLES_FORCE_PAUSE UINT32_C(0x100)
/*
* This bit must be '1' for the eee_link_speed_mask field to be
* configured.
*/
#define HWRM_PORT_PHY_CFG_INPUT_ENABLES_EEE_LINK_SPEED_MASK \
UINT32_C(0x200)
/* This bit must be '1' for the tx_lpi_timer field to be configured. */
#define HWRM_PORT_PHY_CFG_INPUT_ENABLES_TX_LPI_TIMER UINT32_C(0x400)
uint16_t port_id;
/* Port ID of port that is to be configured. */
uint16_t force_link_speed;
/*
* This is the speed that will be used if the force bit is '1'.
* If unsupported speed is selected, an error will be generated.
*/
/* 100Mb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_100MB UINT32_C(0x1)
/* 1Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_1GB UINT32_C(0xa)
/* 2Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_2GB UINT32_C(0x14)
/* 2.5Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_2_5GB UINT32_C(0x19)
/* 10Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_10GB UINT32_C(0x64)
/* 20Mb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_20GB UINT32_C(0xc8)
/* 25Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_25GB UINT32_C(0xfa)
/* 40Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_40GB UINT32_C(0x190)
/* 50Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_50GB UINT32_C(0x1f4)
/* 100Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_100GB UINT32_C(0x3e8)
/* 10Mb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_10MB UINT32_C(0xffff)
uint8_t auto_mode;
/*
* This value is used to identify what autoneg mode is used when
* the link speed is not being forced.
*/
/*
* Disable autoneg or autoneg disabled. No
* speeds are selected.
*/
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_NONE UINT32_C(0x0)
/* Select all possible speeds for autoneg mode. */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_ALL_SPEEDS UINT32_C(0x1)
/*
* Select only the auto_link_speed speed for
* autoneg mode. This mode has been DEPRECATED.
* An HWRM client should not use this mode.
*/
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_ONE_SPEED UINT32_C(0x2)
/*
* Select the auto_link_speed or any speed below
* that speed for autoneg. This mode has been
* DEPRECATED. An HWRM client should not use
* this mode.
*/
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_ONE_OR_BELOW UINT32_C(0x3)
/*
* Select the speeds based on the corresponding
* link speed mask value that is provided.
*/
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_SPEED_MASK UINT32_C(0x4)
uint8_t auto_duplex;
/*
* This is the duplex setting that will be used if the
* autoneg_mode is "one_speed" or "one_or_below".
*/
/* Half Duplex will be requested. */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_HALF UINT32_C(0x0)
/* Full duplex will be requested. */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_FULL UINT32_C(0x1)
/* Both Half and Full dupex will be requested. */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_BOTH UINT32_C(0x2)
uint8_t auto_pause;
/*
* This value is used to configure the pause that will be used
* for autonegotiation. Add text on the usage of auto_pause and
* force_pause.
*/
/*
* When this bit is '1', Generation of tx pause messages has
* been requested. Disabled otherwise.
*/
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_TX UINT32_C(0x1)
/*
* When this bit is '1', Reception of rx pause messages has been
* requested. Disabled otherwise.
*/
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_RX UINT32_C(0x2)
/*
* When set to 1, the advertisement of pause is enabled. # When
* the auto_mode is not set to none and this flag is set to 1,
* then the auto_pause bits on this port are being advertised
* and autoneg pause results are being interpreted. # When the
* auto_mode is not set to none and this flag is set to 0, the
* pause is forced as indicated in force_pause, and also
* advertised as auto_pause bits, but the autoneg results are
* not interpreted since the pause configuration is being
* forced. # When the auto_mode is set to none and this flag is
* set to 1, auto_pause bits should be ignored and should be set
* to 0.
*/
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_AUTONEG_PAUSE UINT32_C(0x4)
uint8_t unused_0;
uint16_t auto_link_speed;
/*
* This is the speed that will be used if the autoneg_mode is
* "one_speed" or "one_or_below". If an unsupported speed is
* selected, an error will be generated.
*/
/* 100Mb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_100MB UINT32_C(0x1)
/* 1Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_1GB UINT32_C(0xa)
/* 2Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_2GB UINT32_C(0x14)
/* 2.5Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_2_5GB UINT32_C(0x19)
/* 10Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_10GB UINT32_C(0x64)
/* 20Mb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_20GB UINT32_C(0xc8)
/* 25Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_25GB UINT32_C(0xfa)
/* 40Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_40GB UINT32_C(0x190)
/* 50Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_50GB UINT32_C(0x1f4)
/* 100Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_100GB UINT32_C(0x3e8)
/* 10Mb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_10MB UINT32_C(0xffff)
uint16_t auto_link_speed_mask;
/*
* This is a mask of link speeds that will be used if
* autoneg_mode is "mask". If unsupported speed is enabled an
* error will be generated.
*/
/* 100Mb link speed (Half-duplex) */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100MBHD \
UINT32_C(0x1)
/* 100Mb link speed (Full-duplex) */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100MB \
UINT32_C(0x2)
/* 1Gb link speed (Half-duplex) */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_1GBHD \
UINT32_C(0x4)
/* 1Gb link speed (Full-duplex) */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_1GB \
UINT32_C(0x8)
/* 2Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_2GB \
UINT32_C(0x10)
/* 2.5Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_2_5GB \
UINT32_C(0x20)
/* 10Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10GB UINT32_C(0x40)
/* 20Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_20GB UINT32_C(0x80)
/* 25Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_25GB \
UINT32_C(0x100)
/* 40Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_40GB \
UINT32_C(0x200)
/* 50Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_50GB \
UINT32_C(0x400)
/* 100Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100GB \
UINT32_C(0x800)
/* 10Mb link speed (Half-duplex) */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10MBHD \
UINT32_C(0x1000)
/* 10Mb link speed (Full-duplex) */
#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10MB \
UINT32_C(0x2000)
uint8_t wirespeed;
/* This value controls the wirespeed feature. */
/* Wirespeed feature is disabled. */
#define HWRM_PORT_PHY_CFG_INPUT_WIOUTPUTEED_OFF UINT32_C(0x0)
/* Wirespeed feature is enabled. */
#define HWRM_PORT_PHY_CFG_INPUT_WIOUTPUTEED_ON UINT32_C(0x1)
uint8_t lpbk;
/* This value controls the loopback setting for the PHY. */
/* No loopback is selected. Normal operation. */
#define HWRM_PORT_PHY_CFG_INPUT_LPBK_NONE UINT32_C(0x0)
/*
* The HW will be configured with local loopback
* such that host data is sent back to the host
* without modification.
*/
#define HWRM_PORT_PHY_CFG_INPUT_LPBK_LOCAL UINT32_C(0x1)
/*
* The HW will be configured with remote
* loopback such that port logic will send
* packets back out the transmitter that are
* received.
*/
#define HWRM_PORT_PHY_CFG_INPUT_LPBK_REMOTE UINT32_C(0x2)
uint8_t force_pause;
/*
* This value is used to configure the pause that will be used
* for force mode.
*/
/*
* When this bit is '1', Generation of tx pause messages is
* supported. Disabled otherwise.
*/
#define HWRM_PORT_PHY_CFG_INPUT_FORCE_PAUSE_TX UINT32_C(0x1)
/*
* When this bit is '1', Reception of rx pause messages is
* supported. Disabled otherwise.
*/
#define HWRM_PORT_PHY_CFG_INPUT_FORCE_PAUSE_RX UINT32_C(0x2)
uint8_t unused_1;
uint32_t preemphasis;
/*
* This value controls the pre-emphasis to be used for the link.
* Driver should not set this value (use enable.preemphasis = 0)
* unless driver is sure of setting. Normally HWRM FW will
* determine proper pre-emphasis.
*/
uint16_t eee_link_speed_mask;
/*
* Setting for link speed mask that is used to advertise speeds
* during autonegotiation when EEE is enabled. This field is
* valid only when EEE is enabled. The speeds specified in this
* field shall be a subset of speeds specified in
* auto_link_speed_mask. If EEE is enabled,then at least one
* speed shall be provided in this mask.
*/
/* Reserved */
#define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD1 UINT32_C(0x1)
/* 100Mb link speed (Full-duplex) */
#define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_100MB UINT32_C(0x2)
/* Reserved */
#define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD2 UINT32_C(0x4)
/* 1Gb link speed (Full-duplex) */
#define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_1GB UINT32_C(0x8)
/* Reserved */
#define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD3 UINT32_C(0x10)
/* Reserved */
#define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD4 UINT32_C(0x20)
/* 10Gb link speed */
#define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_10GB UINT32_C(0x40)
uint8_t unused_2;
uint8_t unused_3;
uint32_t tx_lpi_timer;
uint32_t unused_4;
/*
* Reuested setting of TX LPI timer in microseconds. This field
* is valid only when EEE is enabled and TX LPI is enabled.
*/
#define HWRM_PORT_PHY_CFG_INPUT_TX_LPI_TIMER_MASK UINT32_C(0xffffff)
#define HWRM_PORT_PHY_CFG_INPUT_TX_LPI_TIMER_SFT 0
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_port_phy_cfg_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_port_phy_qcfg */
/* Description: This command queries the PHY configuration for the port. */
/* Input (24 bytes) */
struct hwrm_port_phy_qcfg_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint16_t port_id;
/* Port ID of port that is to be queried. */
uint16_t unused_0[3];
} __attribute__((packed));
/* Output (96 bytes) */
struct hwrm_port_phy_qcfg_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint8_t link;
/* This value indicates the current link status. */
/* There is no link or cable detected. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_NO_LINK UINT32_C(0x0)
/* There is no link, but a cable has been detected. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SIGNAL UINT32_C(0x1)
/* There is a link. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_LINK UINT32_C(0x2)
uint8_t unused_0;
uint16_t link_speed;
/* This value indicates the current link speed of the connection. */
/* 100Mb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_100MB UINT32_C(0x1)
/* 1Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_1GB UINT32_C(0xa)
/* 2Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_2GB UINT32_C(0x14)
/* 2.5Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_2_5GB UINT32_C(0x19)
/* 10Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_10GB UINT32_C(0x64)
/* 20Mb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_20GB UINT32_C(0xc8)
/* 25Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_25GB UINT32_C(0xfa)
/* 40Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_40GB UINT32_C(0x190)
/* 50Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_50GB UINT32_C(0x1f4)
/* 100Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_100GB UINT32_C(0x3e8)
/* 10Mb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_10MB UINT32_C(0xffff)
uint8_t duplex_cfg;
/* This value is indicates the duplex of the current connection. */
/* Half Duplex connection. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_CFG_HALF UINT32_C(0x0)
/* Full duplex connection. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_CFG_FULL UINT32_C(0x1)
uint8_t pause;
/*
* This value is used to indicate the current pause
* configuration. When autoneg is enabled, this value represents
* the autoneg results of pause configuration.
*/
/*
* When this bit is '1', Generation of tx pause messages is
* supported. Disabled otherwise.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_TX UINT32_C(0x1)
/*
* When this bit is '1', Reception of rx pause messages is
* supported. Disabled otherwise.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_RX UINT32_C(0x2)
uint16_t support_speeds;
/*
* The supported speeds for the port. This is a bit mask. For
* each speed that is supported, the corrresponding bit will be
* set to '1'.
*/
/* 100Mb link speed (Half-duplex) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100MBHD UINT32_C(0x1)
/* 100Mb link speed (Full-duplex) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100MB UINT32_C(0x2)
/* 1Gb link speed (Half-duplex) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_1GBHD UINT32_C(0x4)
/* 1Gb link speed (Full-duplex) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_1GB UINT32_C(0x8)
/* 2Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_2GB UINT32_C(0x10)
/* 2.5Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_2_5GB UINT32_C(0x20)
/* 10Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10GB UINT32_C(0x40)
/* 20Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_20GB UINT32_C(0x80)
/* 25Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_25GB UINT32_C(0x100)
/* 40Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_40GB UINT32_C(0x200)
/* 50Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_50GB UINT32_C(0x400)
/* 100Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100GB UINT32_C(0x800)
/* 10Mb link speed (Half-duplex) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10MBHD UINT32_C(0x1000)
/* 10Mb link speed (Full-duplex) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10MB UINT32_C(0x2000)
uint16_t force_link_speed;
/*
* Current setting of forced link speed. When the link speed is
* not being forced, this value shall be set to 0.
*/
/* 100Mb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_100MB UINT32_C(0x1)
/* 1Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_1GB UINT32_C(0xa)
/* 2Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_2GB UINT32_C(0x14)
/* 2.5Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_2_5GB UINT32_C(0x19)
/* 10Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_10GB UINT32_C(0x64)
/* 20Mb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_20GB UINT32_C(0xc8)
/* 25Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_25GB UINT32_C(0xfa)
/* 40Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_40GB UINT32_C(0x190)
/* 50Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_50GB UINT32_C(0x1f4)
/* 100Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_100GB UINT32_C(0x3e8)
/* 10Mb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_10MB UINT32_C(0xffff)
uint8_t auto_mode;
/* Current setting of auto negotiation mode. */
/*
* Disable autoneg or autoneg disabled. No
* speeds are selected.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_NONE UINT32_C(0x0)
/* Select all possible speeds for autoneg mode. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_ALL_SPEEDS UINT32_C(0x1)
/*
* Select only the auto_link_speed speed for
* autoneg mode. This mode has been DEPRECATED.
* An HWRM client should not use this mode.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_ONE_SPEED UINT32_C(0x2)
/*
* Select the auto_link_speed or any speed below
* that speed for autoneg. This mode has been
* DEPRECATED. An HWRM client should not use
* this mode.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_ONE_OR_BELOW UINT32_C(0x3)
/*
* Select the speeds based on the corresponding
* link speed mask value that is provided.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_SPEED_MASK UINT32_C(0x4)
uint8_t auto_pause;
/*
* Current setting of pause autonegotiation. Move autoneg_pause
* flag here.
*/
/*
* When this bit is '1', Generation of tx pause messages has
* been requested. Disabled otherwise.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAUSE_TX UINT32_C(0x1)
/*
* When this bit is '1', Reception of rx pause messages has been
* requested. Disabled otherwise.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAUSE_RX UINT32_C(0x2)
/*
* When set to 1, the advertisement of pause is enabled. # When
* the auto_mode is not set to none and this flag is set to 1,
* then the auto_pause bits on this port are being advertised
* and autoneg pause results are being interpreted. # When the
* auto_mode is not set to none and this flag is set to 0, the
* pause is forced as indicated in force_pause, and also
* advertised as auto_pause bits, but the autoneg results are
* not interpreted since the pause configuration is being
* forced. # When the auto_mode is set to none and this flag is
* set to 1, auto_pause bits should be ignored and should be set
* to 0.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAUSE_AUTONEG_PAUSE UINT32_C(0x4)
uint16_t auto_link_speed;
/*
* Current setting for auto_link_speed. This field is only valid
* when auto_mode is set to "one_speed" or "one_or_below".
*/
/* 100Mb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_100MB UINT32_C(0x1)
/* 1Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_1GB UINT32_C(0xa)
/* 2Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_2GB UINT32_C(0x14)
/* 2.5Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_2_5GB UINT32_C(0x19)
/* 10Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_10GB UINT32_C(0x64)
/* 20Mb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_20GB UINT32_C(0xc8)
/* 25Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_25GB UINT32_C(0xfa)
/* 40Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_40GB UINT32_C(0x190)
/* 50Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_50GB UINT32_C(0x1f4)
/* 100Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_100GB UINT32_C(0x3e8)
/* 10Mb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_10MB UINT32_C(0xffff)
uint16_t auto_link_speed_mask;
/*
* Current setting for auto_link_speed_mask that is used to
* advertise speeds during autonegotiation. This field is only
* valid when auto_mode is set to "mask". The speeds specified
* in this field shall be a subset of supported speeds on this
* port.
*/
/* 100Mb link speed (Half-duplex) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_100MBHD \
UINT32_C(0x1)
/* 100Mb link speed (Full-duplex) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_100MB \
UINT32_C(0x2)
/* 1Gb link speed (Half-duplex) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_1GBHD \
UINT32_C(0x4)
/* 1Gb link speed (Full-duplex) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_1GB UINT32_C(0x8)
/* 2Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_2GB \
UINT32_C(0x10)
/* 2.5Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_2_5GB \
UINT32_C(0x20)
/* 10Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_10GB \
UINT32_C(0x40)
/* 20Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_20GB \
UINT32_C(0x80)
/* 25Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_25GB \
UINT32_C(0x100)
/* 40Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_40GB \
UINT32_C(0x200)
/* 50Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_50GB \
UINT32_C(0x400)
/* 100Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_100GB \
UINT32_C(0x800)
/* 10Mb link speed (Half-duplex) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_10MBHD \
UINT32_C(0x1000)
/* 10Mb link speed (Full-duplex) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_10MB \
UINT32_C(0x2000)
uint8_t wirespeed;
/* Current setting for wirespeed. */
/* Wirespeed feature is disabled. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_WIOUTPUTEED_OFF UINT32_C(0x0)
/* Wirespeed feature is enabled. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_WIOUTPUTEED_ON UINT32_C(0x1)
uint8_t lpbk;
/* Current setting for loopback. */
/* No loopback is selected. Normal operation. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_NONE UINT32_C(0x0)
/*
* The HW will be configured with local loopback
* such that host data is sent back to the host
* without modification.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_LOCAL UINT32_C(0x1)
/*
* The HW will be configured with remote
* loopback such that port logic will send
* packets back out the transmitter that are
* received.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_REMOTE UINT32_C(0x2)
uint8_t force_pause;
/*
* Current setting of forced pause. When the pause configuration
* is not being forced, then this value shall be set to 0.
*/
/*
* When this bit is '1', Generation of tx pause messages is
* supported. Disabled otherwise.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_PAUSE_TX UINT32_C(0x1)
/*
* When this bit is '1', Reception of rx pause messages is
* supported. Disabled otherwise.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_PAUSE_RX UINT32_C(0x2)
uint8_t module_status;
/*
* This value indicates the current status of the optics module
* on this port.
*/
/* Module is inserted and accepted */
#define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NONE UINT32_C(0x0)
/* Module is rejected and transmit side Laser is disabled. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_DISABLETX UINT32_C(0x1)
/* Module mismatch warning. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_WARNINGMSG UINT32_C(0x2)
/* Module is rejected and powered down. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_PWRDOWN UINT32_C(0x3)
/* Module is not inserted. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NOTINSERTED \
UINT32_C(0x4)
/* Module status is not applicable. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NOTAPPLICABLE \
UINT32_C(0xff)
uint32_t preemphasis;
/* Current setting for preemphasis. */
uint8_t phy_maj;
/* This field represents the major version of the PHY. */
uint8_t phy_min;
/* This field represents the minor version of the PHY. */
uint8_t phy_bld;
/* This field represents the build version of the PHY. */
uint8_t phy_type;
/* This value represents a PHY type. */
/* Unknown */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_UNKNOWN UINT32_C(0x0)
/* BASE-CR */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASECR UINT32_C(0x1)
/* BASE-KR4 (Deprecated) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR4 UINT32_C(0x2)
/* BASE-LR */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASELR UINT32_C(0x3)
/* BASE-SR */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASESR UINT32_C(0x4)
/* BASE-KR2 (Deprecated) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR2 UINT32_C(0x5)
/* BASE-KX */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKX UINT32_C(0x6)
/* BASE-KR */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR UINT32_C(0x7)
/* BASE-T */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASET UINT32_C(0x8)
/* EEE capable BASE-T */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASETE UINT32_C(0x9)
/* SGMII connected external PHY */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_SGMIIEXTPHY UINT32_C(0xa)
/* 25G_BASECR_CA_L */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASECR_CA_L UINT32_C(0xb)
/* 25G_BASECR_CA_S */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASECR_CA_S UINT32_C(0xc)
/* 25G_BASECR_CA_N */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASECR_CA_N UINT32_C(0xd)
/* 25G_BASESR */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASESR UINT32_C(0xe)
/* 100G_BASECR4 */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASECR4 UINT32_C(0xf)
/* 100G_BASESR4 */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASESR4 UINT32_C(0x10)
/* 100G_BASELR4 */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASELR4 UINT32_C(0x11)
/* 100G_BASEER4 */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASEER4 UINT32_C(0x12)
/* 100G_BASESR10 */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASESR10 UINT32_C(0x13)
/* 40G_BASECR4 */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASECR4 UINT32_C(0x14)
/* 40G_BASESR4 */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASESR4 UINT32_C(0x15)
/* 40G_BASELR4 */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASELR4 UINT32_C(0x16)
/* 40G_BASEER4 */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASEER4 UINT32_C(0x17)
/* 40G_ACTIVE_CABLE */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_ACTIVE_CABLE \
UINT32_C(0x18)
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_1G_BASET UINT32_C(0x19)
/* 1G_baseSX */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_1G_BASESX UINT32_C(0x1a)
/* 1G_baseCX */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_1G_BASECX UINT32_C(0x1b)
uint8_t media_type;
/* This value represents a media type. */
/* Unknown */
#define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_UNKNOWN UINT32_C(0x0)
/* Twisted Pair */
#define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_TP UINT32_C(0x1)
/* Direct Attached Copper */
#define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_DAC UINT32_C(0x2)
/* Fiber */
#define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_FIBRE UINT32_C(0x3)
uint8_t xcvr_pkg_type;
/* This value represents a transceiver type. */
/* PHY and MAC are in the same package */
#define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_XCVR_INTERNAL \
UINT32_C(0x1)
/* PHY and MAC are in different packages */
#define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_XCVR_EXTERNAL \
UINT32_C(0x2)
uint8_t eee_config_phy_addr;
/*
* This field represents flags related to EEE configuration.
* These EEE configuration flags are valid only when the
* auto_mode is not set to none (in other words autonegotiation
* is enabled).
*/
/* This field represents PHY address. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_ADDR_MASK UINT32_C(0x1f)
#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_ADDR_SFT 0
/*
* When set to 1, Energy Efficient Ethernet (EEE) mode is
* enabled. Speeds for autoneg with EEE mode enabled are based
* on eee_link_speed_mask.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_ENABLED UINT32_C(0x20)
/*
* This flag is valid only when eee_enabled is set to 1. # If
* eee_enabled is set to 0, then EEE mode is disabled and this
* flag shall be ignored. # If eee_enabled is set to 1 and this
* flag is set to 1, then Energy Efficient Ethernet (EEE) mode
* is enabled and in use. # If eee_enabled is set to 1 and this
* flag is set to 0, then Energy Efficient Ethernet (EEE) mode
* is enabled but is currently not in use.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_ACTIVE UINT32_C(0x40)
/*
* This flag is valid only when eee_enabled is set to 1. # If
* eee_enabled is set to 0, then EEE mode is disabled and this
* flag shall be ignored. # If eee_enabled is set to 1 and this
* flag is set to 1, then Energy Efficient Ethernet (EEE) mode
* is enabled and TX LPI is enabled. # If eee_enabled is set to
* 1 and this flag is set to 0, then Energy Efficient Ethernet
* (EEE) mode is enabled but TX LPI is disabled.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_TX_LPI UINT32_C(0x80)
/*
* This field represents flags related to EEE configuration.
* These EEE configuration flags are valid only when the
* auto_mode is not set to none (in other words autonegotiation
* is enabled).
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_MASK UINT32_C(0xe0)
#define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_SFT 5
uint8_t parallel_detect;
/* Reserved field, set to 0 */
/*
* When set to 1, the parallel detection is used to determine
* the speed of the link partner. Parallel detection is used
* when a autonegotiation capable device is connected to a link
* parter that is not capable of autonegotiation.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_PARALLEL_DETECT UINT32_C(0x1)
/* Reserved field, set to 0 */
#define HWRM_PORT_PHY_QCFG_OUTPUT_RESERVED_MASK UINT32_C(0xfe)
#define HWRM_PORT_PHY_QCFG_OUTPUT_RESERVED_SFT 1
uint16_t link_partner_adv_speeds;
/*
* The advertised speeds for the port by the link partner. Each
* advertised speed will be set to '1'.
*/
/* 100Mb link speed (Half-duplex) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_100MBHD \
UINT32_C(0x1)
/* 100Mb link speed (Full-duplex) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_100MB \
UINT32_C(0x2)
/* 1Gb link speed (Half-duplex) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_1GBHD \
UINT32_C(0x4)
/* 1Gb link speed (Full-duplex) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_1GB \
UINT32_C(0x8)
/* 2Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_2GB \
UINT32_C(0x10)
/* 2.5Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_2_5GB \
UINT32_C(0x20)
/* 10Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_10GB \
UINT32_C(0x40)
/* 20Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_20GB \
UINT32_C(0x80)
/* 25Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_25GB \
UINT32_C(0x100)
/* 40Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_40GB \
UINT32_C(0x200)
/* 50Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_50GB \
UINT32_C(0x400)
/* 100Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_100GB \
UINT32_C(0x800)
/* 10Mb link speed (Half-duplex) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_10MBHD \
UINT32_C(0x1000)
/* 10Mb link speed (Full-duplex) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_10MB \
UINT32_C(0x2000)
uint8_t link_partner_adv_auto_mode;
/*
* The advertised autoneg for the port by the link partner. This
* field is deprecated and should be set to 0.
*/
/*
* Disable autoneg or autoneg disabled. No
* speeds are selected.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_NONE \
UINT32_C(0x0)
/* Select all possible speeds for autoneg mode. */
#define \
HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ALL_SPEEDS \
UINT32_C(0x1)
/*
* Select only the auto_link_speed speed for
* autoneg mode. This mode has been DEPRECATED.
* An HWRM client should not use this mode.
*/
#define \
HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ONE_SPEED \
UINT32_C(0x2)
/*
* Select the auto_link_speed or any speed below
* that speed for autoneg. This mode has been
* DEPRECATED. An HWRM client should not use
* this mode.
*/
#define \
HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ONE_OR_BELOW \
UINT32_C(0x3)
/*
* Select the speeds based on the corresponding
* link speed mask value that is provided.
*/
#define \
HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_SPEED_MASK \
UINT32_C(0x4)
uint8_t link_partner_adv_pause;
/* The advertised pause settings on the port by the link partner. */
/*
* When this bit is '1', Generation of tx pause messages is
* supported. Disabled otherwise.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_PAUSE_TX \
UINT32_C(0x1)
/*
* When this bit is '1', Reception of rx pause messages is
* supported. Disabled otherwise.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_PAUSE_RX \
UINT32_C(0x2)
uint16_t adv_eee_link_speed_mask;
/*
* Current setting for link speed mask that is used to advertise
* speeds during autonegotiation when EEE is enabled. This field
* is valid only when eee_enabled flags is set to 1. The speeds
* specified in this field shall be a subset of speeds specified
* in auto_link_speed_mask.
*/
/* Reserved */
#define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD1 \
UINT32_C(0x1)
/* 100Mb link speed (Full-duplex) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_100MB \
UINT32_C(0x2)
/* Reserved */
#define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD2 \
UINT32_C(0x4)
/* 1Gb link speed (Full-duplex) */
#define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_1GB \
UINT32_C(0x8)
/* Reserved */
#define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD3 \
UINT32_C(0x10)
/* Reserved */
#define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD4 \
UINT32_C(0x20)
/* 10Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_10GB \
UINT32_C(0x40)
uint16_t link_partner_adv_eee_link_speed_mask;
/*
* Current setting for link speed mask that is advertised by the
* link partner when EEE is enabled. This field is valid only
* when eee_enabled flags is set to 1.
*/
/* Reserved */
#define \
HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD1 \
UINT32_C(0x1)
/* 100Mb link speed (Full-duplex) */
#define \
HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_100MB \
UINT32_C(0x2)
/* Reserved */
#define \
HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD2 \
UINT32_C(0x4)
/* 1Gb link speed (Full-duplex) */
#define \
HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_1GB \
UINT32_C(0x8)
/* Reserved */
#define \
HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD3 \
UINT32_C(0x10)
/* Reserved */
#define \
HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD4 \
UINT32_C(0x20)
/* 10Gb link speed */
#define \
HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_10GB \
UINT32_C(0x40)
uint32_t xcvr_identifier_type_tx_lpi_timer;
/* This value represents transceiver identifier type. */
/*
* Current setting of TX LPI timer in microseconds. This field
* is valid only when_eee_enabled flag is set to 1 and
* tx_lpi_enabled is set to 1.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_TX_LPI_TIMER_MASK UINT32_C(0xffffff)
#define HWRM_PORT_PHY_QCFG_OUTPUT_TX_LPI_TIMER_SFT 0
/* This value represents transceiver identifier type. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_MASK \
UINT32_C(0xff000000)
#define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_SFT 24
/* Unknown */
#define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_UNKNOWN \
(UINT32_C(0x0) << 24)
/* SFP/SFP+/SFP28 */
#define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_SFP \
(UINT32_C(0x3) << 24)
/* QSFP */
#define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFP \
(UINT32_C(0xc) << 24)
/* QSFP+ */
#define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFPPLUS \
(UINT32_C(0xd) << 24)
/* QSFP28 */
#define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFP28 \
(UINT32_C(0x11) << 24)
uint16_t fec_cfg;
/*
* This value represents the current configuration of Forward
* Error Correction (FEC) on the port.
*/
/*
* When set to 1, then FEC is not supported on this port. If
* this flag is set to 1, then all other FEC configuration flags
* shall be ignored. When set to 0, then FEC is supported as
* indicated by other configuration flags. If no cable is
* attached and the HWRM does not yet know the FEC capability,
* then the HWRM shall set this flag to 1 when reporting FEC
* capability.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_NONE_SUPPORTED \
UINT32_C(0x1)
/*
* When set to 1, then FEC autonegotiation is supported on this
* port. When set to 0, then FEC autonegotiation is not
* supported on this port.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_AUTONEG_SUPPORTED \
UINT32_C(0x2)
/*
* When set to 1, then FEC autonegotiation is enabled on this
* port. When set to 0, then FEC autonegotiation is disabled if
* supported. This flag should be ignored if FEC autonegotiation
* is not supported on this port.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_AUTONEG_ENABLED \
UINT32_C(0x4)
/*
* When set to 1, then FEC CLAUSE 74 (Fire Code) is supported on
* this port. When set to 0, then FEC CLAUSE 74 (Fire Code) is
* not supported on this port.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE74_SUPPORTED \
UINT32_C(0x8)
/*
* When set to 1, then FEC CLAUSE 74 (Fire Code) is enabled on
* this port. When set to 0, then FEC CLAUSE 74 (Fire Code) is
* disabled if supported. This flag should be ignored if FEC
* CLAUSE 74 is not supported on this port.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE74_ENABLED \
UINT32_C(0x10)
/*
* When set to 1, then FEC CLAUSE 91 (Reed Solomon) is supported
* on this port. When set to 0, then FEC CLAUSE 91 (Reed
* Solomon) is not supported on this port.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE91_SUPPORTED \
UINT32_C(0x20)
/*
* When set to 1, then FEC CLAUSE 91 (Reed Solomon) is enabled
* on this port. When set to 0, then FEC CLAUSE 91 (Reed
* Solomon) is disabled if supported. This flag should be
* ignored if FEC CLAUSE 91 is not supported on this port.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE91_ENABLED \
UINT32_C(0x40)
uint8_t duplex_state;
/*
* This value is indicates the duplex of the current connection
* state.
*/
/* Half Duplex connection. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_STATE_HALF UINT32_C(0x0)
/* Full duplex connection. */
#define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_STATE_FULL UINT32_C(0x1)
uint8_t unused_1;
char phy_vendor_name[16];
/*
* Up to 16 bytes of null padded ASCII string representing PHY
* vendor. If the string is set to null, then the vendor name is
* not available.
*/
char phy_vendor_partnumber[16];
/*
* Up to 16 bytes of null padded ASCII string that identifies
* vendor specific part number of the PHY. If the string is set
* to null, then the vendor specific part number is not
* available.
*/
uint32_t unused_2;
uint8_t unused_3;
uint8_t unused_4;
uint8_t unused_5;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_port_qstats */
/* Description: This function returns per port Ethernet statistics. */
/* Input (40 bytes) */
struct hwrm_port_qstats_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint16_t port_id;
/* Port ID of port that is being queried. */
uint8_t unused_0;
uint8_t unused_1;
uint8_t unused_2[3];
uint8_t unused_3;
uint64_t tx_stat_host_addr;
/* This is the host address where Tx port statistics will be stored */
uint64_t rx_stat_host_addr;
/* This is the host address where Rx port statistics will be stored */
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_port_qstats_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint16_t tx_stat_size;
/* The size of TX port statistics block in bytes. */
uint16_t rx_stat_size;
/* The size of RX port statistics block in bytes. */
uint8_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_port_clr_stats */
/*
* Description: This function clears per port statistics. The HWRM shall not
* allow a VF driver to clear port statistics. The HWRM shall not allow a PF
* driver to clear port statistics in a partitioning mode. The HWRM may allow a
* PF driver to clear port statistics in the non-partitioning mode.
*/
/* Input (24 bytes) */
struct hwrm_port_clr_stats_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint16_t port_id;
/* Port ID of port that is being queried. */
uint16_t unused_0[3];
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_port_clr_stats_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_port_led_cfg */
/*
* Description: This function is used to configure LEDs on a given port. Each
* port has individual set of LEDs associated with it. These LEDs are used for
* speed/link configuration as well as activity indicator configuration. Up to
* three LEDs can be configured, one for activity and two for speeds.
*/
/* Input (64 bytes) */
struct hwrm_port_led_cfg_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint32_t enables;
/* This bit must be '1' for the led0_id field to be configured. */
#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_ID UINT32_C(0x1)
/* This bit must be '1' for the led0_state field to be configured. */
#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_STATE UINT32_C(0x2)
/* This bit must be '1' for the led0_color field to be configured. */
#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_COLOR UINT32_C(0x4)
/*
* This bit must be '1' for the led0_blink_on field to be
* configured.
*/
#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_BLINK_ON UINT32_C(0x8)
/*
* This bit must be '1' for the led0_blink_off field to be
* configured.
*/
#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_BLINK_OFF UINT32_C(0x10)
/*
* This bit must be '1' for the led0_group_id field to be
* configured.
*/
#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_GROUP_ID UINT32_C(0x20)
/* This bit must be '1' for the led1_id field to be configured. */
#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_ID UINT32_C(0x40)
/* This bit must be '1' for the led1_state field to be configured. */
#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_STATE UINT32_C(0x80)
/* This bit must be '1' for the led1_color field to be configured. */
#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_COLOR UINT32_C(0x100)
/*
* This bit must be '1' for the led1_blink_on field to be
* configured.
*/
#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_BLINK_ON UINT32_C(0x200)
/*
* This bit must be '1' for the led1_blink_off field to be
* configured.
*/
#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_BLINK_OFF UINT32_C(0x400)
/*
* This bit must be '1' for the led1_group_id field to be
* configured.
*/
#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_GROUP_ID UINT32_C(0x800)
/* This bit must be '1' for the led2_id field to be configured. */
#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_ID UINT32_C(0x1000)
/* This bit must be '1' for the led2_state field to be configured. */
#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_STATE UINT32_C(0x2000)
/* This bit must be '1' for the led2_color field to be configured. */
#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_COLOR UINT32_C(0x4000)
/*
* This bit must be '1' for the led2_blink_on field to be
* configured.
*/
#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_BLINK_ON UINT32_C(0x8000)
/*
* This bit must be '1' for the led2_blink_off field to be
* configured.
*/
#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_BLINK_OFF UINT32_C(0x10000)
/*
* This bit must be '1' for the led2_group_id field to be
* configured.
*/
#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_GROUP_ID UINT32_C(0x20000)
/* This bit must be '1' for the led3_id field to be configured. */
#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_ID UINT32_C(0x40000)
/* This bit must be '1' for the led3_state field to be configured. */
#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_STATE UINT32_C(0x80000)
/* This bit must be '1' for the led3_color field to be configured. */
#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_COLOR UINT32_C(0x100000)
/*
* This bit must be '1' for the led3_blink_on field to be
* configured.
*/
#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_BLINK_ON UINT32_C(0x200000)
/*
* This bit must be '1' for the led3_blink_off field to be
* configured.
*/
#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_BLINK_OFF \
UINT32_C(0x400000)
/*
* This bit must be '1' for the led3_group_id field to be
* configured.
*/
#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_GROUP_ID UINT32_C(0x800000)
uint16_t port_id;
/* Port ID of port whose LEDs are configured. */
uint8_t num_leds;
/*
* The number of LEDs that are being configured. Up to 4 LEDs
* can be configured with this command.
*/
uint8_t rsvd;
/* Reserved field. */
uint8_t led0_id;
/* An identifier for the LED #0. */
uint8_t led0_state;
/* The requested state of the LED #0. */
/* Default state of the LED */
#define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_DEFAULT UINT32_C(0x0)
/* Off */
#define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_OFF UINT32_C(0x1)
/* On */
#define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_ON UINT32_C(0x2)
/* Blink */
#define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_BLINK UINT32_C(0x3)
/* Blink Alternately */
#define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_BLINKALT UINT32_C(0x4)
uint8_t led0_color;
/* The requested color of LED #0. */
/* Default */
#define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_DEFAULT UINT32_C(0x0)
/* Amber */
#define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_AMBER UINT32_C(0x1)
/* Green */
#define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_GREEN UINT32_C(0x2)
/* Green or Amber */
#define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_GREENAMBER UINT32_C(0x3)
uint8_t unused_0;
uint16_t led0_blink_on;
/*
* If the LED #0 state is "blink" or "blinkalt", then this field
* represents the requested time in milliseconds to keep LED on
* between cycles.
*/
uint16_t led0_blink_off;
/*
* If the LED #0 state is "blink" or "blinkalt", then this field
* represents the requested time in milliseconds to keep LED off
* between cycles.
*/
uint8_t led0_group_id;
/*
* An identifier for the group of LEDs that LED #0 belongs to.
* If set to 0, then the LED #0 shall not be grouped and shall
* be treated as an individual resource. For all other non-zero
* values of this field, LED #0 shall be grouped together with
* the LEDs with the same group ID value.
*/
uint8_t rsvd0;
/* Reserved field. */
uint8_t led1_id;
/* An identifier for the LED #1. */
uint8_t led1_state;
/* The requested state of the LED #1. */
/* Default state of the LED */
#define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_DEFAULT UINT32_C(0x0)
/* Off */
#define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_OFF UINT32_C(0x1)
/* On */
#define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_ON UINT32_C(0x2)
/* Blink */
#define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_BLINK UINT32_C(0x3)
/* Blink Alternately */
#define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_BLINKALT UINT32_C(0x4)
uint8_t led1_color;
/* The requested color of LED #1. */
/* Default */
#define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_DEFAULT UINT32_C(0x0)
/* Amber */
#define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_AMBER UINT32_C(0x1)
/* Green */
#define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_GREEN UINT32_C(0x2)
/* Green or Amber */
#define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_GREENAMBER UINT32_C(0x3)
uint8_t unused_1;
uint16_t led1_blink_on;
/*
* If the LED #1 state is "blink" or "blinkalt", then this field
* represents the requested time in milliseconds to keep LED on
* between cycles.
*/
uint16_t led1_blink_off;
/*
* If the LED #1 state is "blink" or "blinkalt", then this field
* represents the requested time in milliseconds to keep LED off
* between cycles.
*/
uint8_t led1_group_id;
/*
* An identifier for the group of LEDs that LED #1 belongs to.
* If set to 0, then the LED #1 shall not be grouped and shall
* be treated as an individual resource. For all other non-zero
* values of this field, LED #1 shall be grouped together with
* the LEDs with the same group ID value.
*/
uint8_t rsvd1;
/* Reserved field. */
uint8_t led2_id;
/* An identifier for the LED #2. */
uint8_t led2_state;
/* The requested state of the LED #2. */
/* Default state of the LED */
#define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_DEFAULT UINT32_C(0x0)
/* Off */
#define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_OFF UINT32_C(0x1)
/* On */
#define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_ON UINT32_C(0x2)
/* Blink */
#define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_BLINK UINT32_C(0x3)
/* Blink Alternately */
#define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_BLINKALT UINT32_C(0x4)
uint8_t led2_color;
/* The requested color of LED #2. */
/* Default */
#define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_DEFAULT UINT32_C(0x0)
/* Amber */
#define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_AMBER UINT32_C(0x1)
/* Green */
#define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_GREEN UINT32_C(0x2)
/* Green or Amber */
#define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_GREENAMBER UINT32_C(0x3)
uint8_t unused_2;
uint16_t led2_blink_on;
/*
* If the LED #2 state is "blink" or "blinkalt", then this field
* represents the requested time in milliseconds to keep LED on
* between cycles.
*/
uint16_t led2_blink_off;
/*
* If the LED #2 state is "blink" or "blinkalt", then this field
* represents the requested time in milliseconds to keep LED off
* between cycles.
*/
uint8_t led2_group_id;
/*
* An identifier for the group of LEDs that LED #2 belongs to.
* If set to 0, then the LED #2 shall not be grouped and shall
* be treated as an individual resource. For all other non-zero
* values of this field, LED #2 shall be grouped together with
* the LEDs with the same group ID value.
*/
uint8_t rsvd2;
/* Reserved field. */
uint8_t led3_id;
/* An identifier for the LED #3. */
uint8_t led3_state;
/* The requested state of the LED #3. */
/* Default state of the LED */
#define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_DEFAULT UINT32_C(0x0)
/* Off */
#define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_OFF UINT32_C(0x1)
/* On */
#define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_ON UINT32_C(0x2)
/* Blink */
#define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_BLINK UINT32_C(0x3)
/* Blink Alternately */
#define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_BLINKALT UINT32_C(0x4)
uint8_t led3_color;
/* The requested color of LED #3. */
/* Default */
#define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_DEFAULT UINT32_C(0x0)
/* Amber */
#define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_AMBER UINT32_C(0x1)
/* Green */
#define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_GREEN UINT32_C(0x2)
/* Green or Amber */
#define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_GREENAMBER UINT32_C(0x3)
uint8_t unused_3;
uint16_t led3_blink_on;
/*
* If the LED #3 state is "blink" or "blinkalt", then this field
* represents the requested time in milliseconds to keep LED on
* between cycles.
*/
uint16_t led3_blink_off;
/*
* If the LED #3 state is "blink" or "blinkalt", then this field
* represents the requested time in milliseconds to keep LED off
* between cycles.
*/
uint8_t led3_group_id;
/*
* An identifier for the group of LEDs that LED #3 belongs to.
* If set to 0, then the LED #3 shall not be grouped and shall
* be treated as an individual resource. For all other non-zero
* values of this field, LED #3 shall be grouped together with
* the LEDs with the same group ID value.
*/
uint8_t rsvd3;
/* Reserved field. */
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_port_led_cfg_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_port_led_qcfg */
/*
* Description: This function is used to query configuration of LEDs on a given
* port. Each port has individual set of LEDs associated with it. These LEDs are
* used for speed/link configuration as well as activity indicator
* configuration. Up to three LEDs can be configured, one for activity and two
* for speeds.
*/
/* Input (24 bytes) */
struct hwrm_port_led_qcfg_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint16_t port_id;
/* Port ID of port whose LED configuration is being queried. */
uint16_t unused_0[3];
} __attribute__((packed));
/* Output (56 bytes) */
struct hwrm_port_led_qcfg_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint8_t num_leds;
/*
* The number of LEDs that are configured on this port. Up to 4
* LEDs can be returned in the response.
*/
uint8_t led0_id;
/* An identifier for the LED #0. */
uint8_t led0_type;
/* The type of LED #0. */
/* Speed LED */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_SPEED UINT32_C(0x0)
/* Activity LED */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_ACTIVITY UINT32_C(0x1)
/* Invalid */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_INVALID UINT32_C(0xff)
uint8_t led0_state;
/* The current state of the LED #0. */
/* Default state of the LED */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_DEFAULT UINT32_C(0x0)
/* Off */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_OFF UINT32_C(0x1)
/* On */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_ON UINT32_C(0x2)
/* Blink */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_BLINK UINT32_C(0x3)
/* Blink Alternately */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_BLINKALT UINT32_C(0x4)
uint8_t led0_color;
/* The color of LED #0. */
/* Default */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_DEFAULT UINT32_C(0x0)
/* Amber */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_AMBER UINT32_C(0x1)
/* Green */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_GREEN UINT32_C(0x2)
/* Green or Amber */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_GREENAMBER UINT32_C(0x3)
uint8_t unused_0;
uint16_t led0_blink_on;
/*
* If the LED #0 state is "blink" or "blinkalt", then this field
* represents the requested time in milliseconds to keep LED on
* between cycles.
*/
uint16_t led0_blink_off;
/*
* If the LED #0 state is "blink" or "blinkalt", then this field
* represents the requested time in milliseconds to keep LED off
* between cycles.
*/
uint8_t led0_group_id;
/*
* An identifier for the group of LEDs that LED #0 belongs to.
* If set to 0, then the LED #0 is not grouped. For all other
* non-zero values of this field, LED #0 is grouped together
* with the LEDs with the same group ID value.
*/
uint8_t led1_id;
/* An identifier for the LED #1. */
uint8_t led1_type;
/* The type of LED #1. */
/* Speed LED */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_SPEED UINT32_C(0x0)
/* Activity LED */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_ACTIVITY UINT32_C(0x1)
/* Invalid */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_INVALID UINT32_C(0xff)
uint8_t led1_state;
/* The current state of the LED #1. */
/* Default state of the LED */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_DEFAULT UINT32_C(0x0)
/* Off */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_OFF UINT32_C(0x1)
/* On */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_ON UINT32_C(0x2)
/* Blink */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_BLINK UINT32_C(0x3)
/* Blink Alternately */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_BLINKALT UINT32_C(0x4)
uint8_t led1_color;
/* The color of LED #1. */
/* Default */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_DEFAULT UINT32_C(0x0)
/* Amber */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_AMBER UINT32_C(0x1)
/* Green */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_GREEN UINT32_C(0x2)
/* Green or Amber */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_GREENAMBER UINT32_C(0x3)
uint8_t unused_1;
uint16_t led1_blink_on;
/*
* If the LED #1 state is "blink" or "blinkalt", then this field
* represents the requested time in milliseconds to keep LED on
* between cycles.
*/
uint16_t led1_blink_off;
/*
* If the LED #1 state is "blink" or "blinkalt", then this field
* represents the requested time in milliseconds to keep LED off
* between cycles.
*/
uint8_t led1_group_id;
/*
* An identifier for the group of LEDs that LED #1 belongs to.
* If set to 0, then the LED #1 is not grouped. For all other
* non-zero values of this field, LED #1 is grouped together
* with the LEDs with the same group ID value.
*/
uint8_t led2_id;
/* An identifier for the LED #2. */
uint8_t led2_type;
/* The type of LED #2. */
/* Speed LED */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_SPEED UINT32_C(0x0)
/* Activity LED */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_ACTIVITY UINT32_C(0x1)
/* Invalid */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_INVALID UINT32_C(0xff)
uint8_t led2_state;
/* The current state of the LED #2. */
/* Default state of the LED */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_DEFAULT UINT32_C(0x0)
/* Off */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_OFF UINT32_C(0x1)
/* On */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_ON UINT32_C(0x2)
/* Blink */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_BLINK UINT32_C(0x3)
/* Blink Alternately */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_BLINKALT UINT32_C(0x4)
uint8_t led2_color;
/* The color of LED #2. */
/* Default */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_DEFAULT UINT32_C(0x0)
/* Amber */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_AMBER UINT32_C(0x1)
/* Green */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_GREEN UINT32_C(0x2)
/* Green or Amber */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_GREENAMBER UINT32_C(0x3)
uint8_t unused_2;
uint16_t led2_blink_on;
/*
* If the LED #2 state is "blink" or "blinkalt", then this field
* represents the requested time in milliseconds to keep LED on
* between cycles.
*/
uint16_t led2_blink_off;
/*
* If the LED #2 state is "blink" or "blinkalt", then this field
* represents the requested time in milliseconds to keep LED off
* between cycles.
*/
uint8_t led2_group_id;
/*
* An identifier for the group of LEDs that LED #2 belongs to.
* If set to 0, then the LED #2 is not grouped. For all other
* non-zero values of this field, LED #2 is grouped together
* with the LEDs with the same group ID value.
*/
uint8_t led3_id;
/* An identifier for the LED #3. */
uint8_t led3_type;
/* The type of LED #3. */
/* Speed LED */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_SPEED UINT32_C(0x0)
/* Activity LED */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_ACTIVITY UINT32_C(0x1)
/* Invalid */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_INVALID UINT32_C(0xff)
uint8_t led3_state;
/* The current state of the LED #3. */
/* Default state of the LED */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_DEFAULT UINT32_C(0x0)
/* Off */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_OFF UINT32_C(0x1)
/* On */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_ON UINT32_C(0x2)
/* Blink */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_BLINK UINT32_C(0x3)
/* Blink Alternately */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_BLINKALT UINT32_C(0x4)
uint8_t led3_color;
/* The color of LED #3. */
/* Default */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_DEFAULT UINT32_C(0x0)
/* Amber */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_AMBER UINT32_C(0x1)
/* Green */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_GREEN UINT32_C(0x2)
/* Green or Amber */
#define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_GREENAMBER UINT32_C(0x3)
uint8_t unused_3;
uint16_t led3_blink_on;
/*
* If the LED #3 state is "blink" or "blinkalt", then this field
* represents the requested time in milliseconds to keep LED on
* between cycles.
*/
uint16_t led3_blink_off;
/*
* If the LED #3 state is "blink" or "blinkalt", then this field
* represents the requested time in milliseconds to keep LED off
* between cycles.
*/
uint8_t led3_group_id;
/*
* An identifier for the group of LEDs that LED #3 belongs to.
* If set to 0, then the LED #3 is not grouped. For all other
* non-zero values of this field, LED #3 is grouped together
* with the LEDs with the same group ID value.
*/
uint8_t unused_4;
uint16_t unused_5;
uint8_t unused_6;
uint8_t unused_7;
uint8_t unused_8;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_port_led_qcaps */
/*
* Description: This function is used to query capabilities of LEDs on a given
* port. Each port has individual set of LEDs associated with it. These LEDs are
* used for speed/link configuration as well as activity indicator
* configuration.
*/
/* Input (24 bytes) */
struct hwrm_port_led_qcaps_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint16_t port_id;
/* Port ID of port whose LED configuration is being queried. */
uint16_t unused_0[3];
} __attribute__((packed));
/* Output (48 bytes) */
struct hwrm_port_led_qcaps_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint8_t num_leds;
/*
* The number of LEDs that are configured on this port. Up to 4
* LEDs can be returned in the response.
*/
uint8_t unused_0[3];
/* Reserved for future use. */
uint8_t led0_id;
/* An identifier for the LED #0. */
uint8_t led0_type;
/* The type of LED #0. */
/* Speed LED */
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_SPEED UINT32_C(0x0)
/* Activity LED */
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_ACTIVITY UINT32_C(0x1)
/* Invalid */
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_INVALID UINT32_C(0xff)
uint8_t led0_group_id;
/*
* An identifier for the group of LEDs that LED #0 belongs to.
* If set to 0, then the LED #0 cannot be grouped. For all other
* non-zero values of this field, LED #0 is grouped together
* with the LEDs with the same group ID value.
*/
uint8_t unused_1;
uint16_t led0_state_caps;
/* The states supported by LED #0. */
/*
* If set to 1, this LED is enabled. If set to 0, this LED is
* disabled.
*/
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_ENABLED UINT32_C(0x1)
/*
* If set to 1, off state is supported on this LED. If set to 0,
* off state is not supported on this LED.
*/
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_OFF_SUPPORTED \
UINT32_C(0x2)
/*
* If set to 1, on state is supported on this LED. If set to 0,
* on state is not supported on this LED.
*/
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_ON_SUPPORTED \
UINT32_C(0x4)
/*
* If set to 1, blink state is supported on this LED. If set to
* 0, blink state is not supported on this LED.
*/
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_BLINK_SUPPORTED \
UINT32_C(0x8)
/*
* If set to 1, blink_alt state is supported on this LED. If set
* to 0, blink_alt state is not supported on this LED.
*/
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_BLINK_ALT_SUPPORTED \
UINT32_C(0x10)
uint16_t led0_color_caps;
/* The colors supported by LED #0. */
/* reserved */
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_COLOR_CAPS_RSVD UINT32_C(0x1)
/*
* If set to 1, Amber color is supported on this LED. If set to
* 0, Amber color is not supported on this LED.
*/
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_COLOR_CAPS_AMBER_SUPPORTED \
UINT32_C(0x2)
/*
* If set to 1, Green color is supported on this LED. If set to
* 0, Green color is not supported on this LED.
*/
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_COLOR_CAPS_GREEN_SUPPORTED \
UINT32_C(0x4)
uint8_t led1_id;
/* An identifier for the LED #1. */
uint8_t led1_type;
/* The type of LED #1. */
/* Speed LED */
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_SPEED UINT32_C(0x0)
/* Activity LED */
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_ACTIVITY UINT32_C(0x1)
/* Invalid */
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_INVALID UINT32_C(0xff)
uint8_t led1_group_id;
/*
* An identifier for the group of LEDs that LED #1 belongs to.
* If set to 0, then the LED #0 cannot be grouped. For all other
* non-zero values of this field, LED #0 is grouped together
* with the LEDs with the same group ID value.
*/
uint8_t unused_2;
uint16_t led1_state_caps;
/* The states supported by LED #1. */
/*
* If set to 1, this LED is enabled. If set to 0, this LED is
* disabled.
*/
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_ENABLED UINT32_C(0x1)
/*
* If set to 1, off state is supported on this LED. If set to 0,
* off state is not supported on this LED.
*/
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_OFF_SUPPORTED \
UINT32_C(0x2)
/*
* If set to 1, on state is supported on this LED. If set to 0,
* on state is not supported on this LED.
*/
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_ON_SUPPORTED \
UINT32_C(0x4)
/*
* If set to 1, blink state is supported on this LED. If set to
* 0, blink state is not supported on this LED.
*/
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_BLINK_SUPPORTED \
UINT32_C(0x8)
/*
* If set to 1, blink_alt state is supported on this LED. If set
* to 0, blink_alt state is not supported on this LED.
*/
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_BLINK_ALT_SUPPORTED \
UINT32_C(0x10)
uint16_t led1_color_caps;
/* The colors supported by LED #1. */
/* reserved */
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_COLOR_CAPS_RSVD UINT32_C(0x1)
/*
* If set to 1, Amber color is supported on this LED. If set to
* 0, Amber color is not supported on this LED.
*/
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_COLOR_CAPS_AMBER_SUPPORTED \
UINT32_C(0x2)
/*
* If set to 1, Green color is supported on this LED. If set to
* 0, Green color is not supported on this LED.
*/
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_COLOR_CAPS_GREEN_SUPPORTED \
UINT32_C(0x4)
uint8_t led2_id;
/* An identifier for the LED #2. */
uint8_t led2_type;
/* The type of LED #2. */
/* Speed LED */
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_SPEED UINT32_C(0x0)
/* Activity LED */
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_ACTIVITY UINT32_C(0x1)
/* Invalid */
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_INVALID UINT32_C(0xff)
uint8_t led2_group_id;
/*
* An identifier for the group of LEDs that LED #0 belongs to.
* If set to 0, then the LED #0 cannot be grouped. For all other
* non-zero values of this field, LED #0 is grouped together
* with the LEDs with the same group ID value.
*/
uint8_t unused_3;
uint16_t led2_state_caps;
/* The states supported by LED #2. */
/*
* If set to 1, this LED is enabled. If set to 0, this LED is
* disabled.
*/
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_ENABLED UINT32_C(0x1)
/*
* If set to 1, off state is supported on this LED. If set to 0,
* off state is not supported on this LED.
*/
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_OFF_SUPPORTED \
UINT32_C(0x2)
/*
* If set to 1, on state is supported on this LED. If set to 0,
* on state is not supported on this LED.
*/
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_ON_SUPPORTED \
UINT32_C(0x4)
/*
* If set to 1, blink state is supported on this LED. If set to
* 0, blink state is not supported on this LED.
*/
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_BLINK_SUPPORTED \
UINT32_C(0x8)
/*
* If set to 1, blink_alt state is supported on this LED. If set
* to 0, blink_alt state is not supported on this LED.
*/
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_BLINK_ALT_SUPPORTED \
UINT32_C(0x10)
uint16_t led2_color_caps;
/* The colors supported by LED #2. */
/* reserved */
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_COLOR_CAPS_RSVD UINT32_C(0x1)
/*
* If set to 1, Amber color is supported on this LED. If set to
* 0, Amber color is not supported on this LED.
*/
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_COLOR_CAPS_AMBER_SUPPORTED \
UINT32_C(0x2)
/*
* If set to 1, Green color is supported on this LED. If set to
* 0, Green color is not supported on this LED.
*/
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_COLOR_CAPS_GREEN_SUPPORTED \
UINT32_C(0x4)
uint8_t led3_id;
/* An identifier for the LED #3. */
uint8_t led3_type;
/* The type of LED #3. */
/* Speed LED */
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_SPEED UINT32_C(0x0)
/* Activity LED */
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_ACTIVITY UINT32_C(0x1)
/* Invalid */
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_INVALID UINT32_C(0xff)
uint8_t led3_group_id;
/*
* An identifier for the group of LEDs that LED #3 belongs to.
* If set to 0, then the LED #0 cannot be grouped. For all other
* non-zero values of this field, LED #0 is grouped together
* with the LEDs with the same group ID value.
*/
uint8_t unused_4;
uint16_t led3_state_caps;
/* The states supported by LED #3. */
/*
* If set to 1, this LED is enabled. If set to 0, this LED is
* disabled.
*/
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_ENABLED UINT32_C(0x1)
/*
* If set to 1, off state is supported on this LED. If set to 0,
* off state is not supported on this LED.
*/
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_OFF_SUPPORTED \
UINT32_C(0x2)
/*
* If set to 1, on state is supported on this LED. If set to 0,
* on state is not supported on this LED.
*/
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_ON_SUPPORTED \
UINT32_C(0x4)
/*
* If set to 1, blink state is supported on this LED. If set to
* 0, blink state is not supported on this LED.
*/
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_BLINK_SUPPORTED \
UINT32_C(0x8)
/*
* If set to 1, blink_alt state is supported on this LED. If set
* to 0, blink_alt state is not supported on this LED.
*/
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_BLINK_ALT_SUPPORTED \
UINT32_C(0x10)
uint16_t led3_color_caps;
/* The colors supported by LED #3. */
/* reserved */
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_COLOR_CAPS_RSVD UINT32_C(0x1)
/*
* If set to 1, Amber color is supported on this LED. If set to
* 0, Amber color is not supported on this LED.
*/
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_COLOR_CAPS_AMBER_SUPPORTED \
UINT32_C(0x2)
/*
* If set to 1, Green color is supported on this LED. If set to
* 0, Green color is not supported on this LED.
*/
#define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_COLOR_CAPS_GREEN_SUPPORTED \
UINT32_C(0x4)
uint8_t unused_5;
uint8_t unused_6;
uint8_t unused_7;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_queue_qportcfg */
/*
* Description: This function is called by a driver to query queue configuration
* of a port. # The HWRM shall at least advertise one queue with lossy service
* profile. # The driver shall use this command to query queue ids before
* configuring or using any queues. # If a service profile is not set for a
* queue, then the driver shall not use that queue without configuring a service
* profile for it. # If the driver is not allowed to configure service profiles,
* then the driver shall only use queues for which service profiles are pre-
* configured.
*/
/* Input (24 bytes) */
struct hwrm_queue_qportcfg_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint32_t flags;
/*
* Enumeration denoting the RX, TX type of the resource. This
* enumeration is used for resources that are similar for both
* TX and RX paths of the chip.
*/
#define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH UINT32_C(0x1)
/* tx path */
#define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
/* rx path */
#define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
#define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_LAST \
QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX
uint16_t port_id;
/*
* Port ID of port for which the queue configuration is being
* queried. This field is only required when sent by IPC.
*/
uint16_t unused_0;
} __attribute__((packed));
/* Output (32 bytes) */
struct hwrm_queue_qportcfg_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint8_t max_configurable_queues;
/*
* The maximum number of queues that can be configured on this
* port. Valid values range from 1 through 8.
*/
uint8_t max_configurable_lossless_queues;
/*
* The maximum number of lossless queues that can be configured
* on this port. Valid values range from 0 through 8.
*/
uint8_t queue_cfg_allowed;
/*
* Bitmask indicating which queues can be configured by the
* hwrm_queue_cfg command. Each bit represents a specific queue
* where bit 0 represents queue 0 and bit 7 represents queue 7.
* # A value of 0 indicates that the queue is not configurable
* by the hwrm_queue_cfg command. # A value of 1 indicates that
* the queue is configurable. # A hwrm_queue_cfg command shall
* return error when trying to configure a queue not
* configurable.
*/
uint8_t queue_cfg_info;
/* Information about queue configuration. */
/*
* If this flag is set to '1', then the queues are configured
* asymmetrically on TX and RX sides. If this flag is set to
* '0', then the queues are configured symmetrically on TX and
* RX sides. For symmetric configuration, the queue
* configuration including queue ids and service profiles on the
* TX side is the same as the corresponding queue configuration
* on the RX side.
*/
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_CFG_INFO_ASYM_CFG UINT32_C(0x1)
uint8_t queue_pfcenable_cfg_allowed;
/*
* Bitmask indicating which queues can be configured by the
* hwrm_queue_pfcenable_cfg command. Each bit represents a
* specific priority where bit 0 represents priority 0 and bit 7
* represents priority 7. # A value of 0 indicates that the
* priority is not configurable by the hwrm_queue_pfcenable_cfg
* command. # A value of 1 indicates that the priority is
* configurable. # A hwrm_queue_pfcenable_cfg command shall
* return error when trying to configure a priority that is not
* configurable.
*/
uint8_t queue_pri2cos_cfg_allowed;
/*
* Bitmask indicating which queues can be configured by the
* hwrm_queue_pri2cos_cfg command. Each bit represents a
* specific queue where bit 0 represents queue 0 and bit 7
* represents queue 7. # A value of 0 indicates that the queue
* is not configurable by the hwrm_queue_pri2cos_cfg command. #
* A value of 1 indicates that the queue is configurable. # A
* hwrm_queue_pri2cos_cfg command shall return error when trying
* to configure a queue that is not configurable.
*/
uint8_t queue_cos2bw_cfg_allowed;
/*
* Bitmask indicating which queues can be configured by the
* hwrm_queue_pri2cos_cfg command. Each bit represents a
* specific queue where bit 0 represents queue 0 and bit 7
* represents queue 7. # A value of 0 indicates that the queue
* is not configurable by the hwrm_queue_pri2cos_cfg command. #
* A value of 1 indicates that the queue is configurable. # A
* hwrm_queue_pri2cos_cfg command shall return error when trying
* to configure a queue not configurable.
*/
uint8_t queue_id0;
/*
* ID of CoS Queue 0. FF - Invalid id # This ID can be used on
* any subsequent call to an hwrm command that takes a queue id.
* # IDs must always be queried by this command before any use
* by the driver or software. # Any driver or software should
* not make any assumptions about queue IDs. # A value of 0xff
* indicates that the queue is not available. # Available queues
* may not be in sequential order.
*/
uint8_t queue_id0_service_profile;
/* This value is applicable to CoS queues only. */
/* Lossy (best-effort) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSY \
UINT32_C(0x0)
/* Lossless */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSLESS \
UINT32_C(0x1)
/*
* Set to 0xFF... (All Fs) if there is no
* service profile specified
*/
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_UNKNOWN \
UINT32_C(0xff)
uint8_t queue_id1;
/*
* ID of CoS Queue 1. FF - Invalid id # This ID can be used on
* any subsequent call to an hwrm command that takes a queue id.
* # IDs must always be queried by this command before any use
* by the driver or software. # Any driver or software should
* not make any assumptions about queue IDs. # A value of 0xff
* indicates that the queue is not available. # Available queues
* may not be in sequential order.
*/
uint8_t queue_id1_service_profile;
/* This value is applicable to CoS queues only. */
/* Lossy (best-effort) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSY \
UINT32_C(0x0)
/* Lossless */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSLESS \
UINT32_C(0x1)
/*
* Set to 0xFF... (All Fs) if there is no
* service profile specified
*/
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_UNKNOWN \
UINT32_C(0xff)
uint8_t queue_id2;
/*
* ID of CoS Queue 2. FF - Invalid id # This ID can be used on
* any subsequent call to an hwrm command that takes a queue id.
* # IDs must always be queried by this command before any use
* by the driver or software. # Any driver or software should
* not make any assumptions about queue IDs. # A value of 0xff
* indicates that the queue is not available. # Available queues
* may not be in sequential order.
*/
uint8_t queue_id2_service_profile;
/* This value is applicable to CoS queues only. */
/* Lossy (best-effort) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSY \
UINT32_C(0x0)
/* Lossless */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSLESS \
UINT32_C(0x1)
/*
* Set to 0xFF... (All Fs) if there is no
* service profile specified
*/
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_UNKNOWN \
UINT32_C(0xff)
uint8_t queue_id3;
/*
* ID of CoS Queue 3. FF - Invalid id # This ID can be used on
* any subsequent call to an hwrm command that takes a queue id.
* # IDs must always be queried by this command before any use
* by the driver or software. # Any driver or software should
* not make any assumptions about queue IDs. # A value of 0xff
* indicates that the queue is not available. # Available queues
* may not be in sequential order.
*/
uint8_t queue_id3_service_profile;
/* This value is applicable to CoS queues only. */
/* Lossy (best-effort) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSY \
UINT32_C(0x0)
/* Lossless */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSLESS \
UINT32_C(0x1)
/*
* Set to 0xFF... (All Fs) if there is no
* service profile specified
*/
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_UNKNOWN \
UINT32_C(0xff)
uint8_t queue_id4;
/*
* ID of CoS Queue 4. FF - Invalid id # This ID can be used on
* any subsequent call to an hwrm command that takes a queue id.
* # IDs must always be queried by this command before any use
* by the driver or software. # Any driver or software should
* not make any assumptions about queue IDs. # A value of 0xff
* indicates that the queue is not available. # Available queues
* may not be in sequential order.
*/
uint8_t queue_id4_service_profile;
/* This value is applicable to CoS queues only. */
/* Lossy (best-effort) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSY \
UINT32_C(0x0)
/* Lossless */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSLESS \
UINT32_C(0x1)
/*
* Set to 0xFF... (All Fs) if there is no
* service profile specified
*/
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_UNKNOWN \
UINT32_C(0xff)
uint8_t queue_id5;
/*
* ID of CoS Queue 5. FF - Invalid id # This ID can be used on
* any subsequent call to an hwrm command that takes a queue id.
* # IDs must always be queried by this command before any use
* by the driver or software. # Any driver or software should
* not make any assumptions about queue IDs. # A value of 0xff
* indicates that the queue is not available. # Available queues
* may not be in sequential order.
*/
uint8_t queue_id5_service_profile;
/* This value is applicable to CoS queues only. */
/* Lossy (best-effort) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSY \
UINT32_C(0x0)
/* Lossless */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSLESS \
UINT32_C(0x1)
/*
* Set to 0xFF... (All Fs) if there is no
* service profile specified
*/
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_UNKNOWN \
UINT32_C(0xff)
uint8_t queue_id6;
/*
* ID of CoS Queue 6. FF - Invalid id # This ID can be used on
* any subsequent call to an hwrm command that takes a queue id.
* # IDs must always be queried by this command before any use
* by the driver or software. # Any driver or software should
* not make any assumptions about queue IDs. # A value of 0xff
* indicates that the queue is not available. # Available queues
* may not be in sequential order.
*/
uint8_t queue_id6_service_profile;
/* This value is applicable to CoS queues only. */
/* Lossy (best-effort) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSY \
UINT32_C(0x0)
/* Lossless */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSLESS \
UINT32_C(0x1)
/*
* Set to 0xFF... (All Fs) if there is no
* service profile specified
*/
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_UNKNOWN \
UINT32_C(0xff)
uint8_t queue_id7;
/*
* ID of CoS Queue 7. FF - Invalid id # This ID can be used on
* any subsequent call to an hwrm command that takes a queue id.
* # IDs must always be queried by this command before any use
* by the driver or software. # Any driver or software should
* not make any assumptions about queue IDs. # A value of 0xff
* indicates that the queue is not available. # Available queues
* may not be in sequential order.
*/
uint8_t queue_id7_service_profile;
/* This value is applicable to CoS queues only. */
/* Lossy (best-effort) */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSY \
UINT32_C(0x0)
/* Lossless */
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSLESS \
UINT32_C(0x1)
/*
* Set to 0xFF... (All Fs) if there is no
* service profile specified
*/
#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_UNKNOWN \
UINT32_C(0xff)
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_vnic_alloc */
/*
* Description: This VNIC is a resource in the RX side of the chip that is used
* to represent a virtual host "interface". # At the time of VNIC allocation or
* configuration, the function can specify whether it wants the requested VNIC
* to be the default VNIC for the function or not. # If a function requests
* allocation of a VNIC for the first time and a VNIC is successfully allocated
* by the HWRM, then the HWRM shall make the allocated VNIC as the default VNIC
* for that function. # The default VNIC shall be used for the default action
* for a partition or function. # For each VNIC allocated on a function, a
* mapping on the RX side to map the allocated VNIC to source virtual interface
* shall be performed by the HWRM. This should be hidden to the function driver
* requesting the VNIC allocation. This enables broadcast/multicast replication
* with source knockout. # If multicast replication with source knockout is
* enabled, then the internal VNIC to SVIF mapping data structures shall be
* programmed at the time of VNIC allocation.
*/
/* Input (24 bytes) */
struct hwrm_vnic_alloc_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint32_t flags;
/*
* When this bit is '1', this VNIC is requested to be the
* default VNIC for this function.
*/
#define HWRM_VNIC_ALLOC_INPUT_FLAGS_DEFAULT UINT32_C(0x1)
uint32_t unused_0;
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_vnic_alloc_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t vnic_id;
/* Logical vnic ID */
uint8_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_vnic_free */
/*
* Description: Free a VNIC resource. Idle any resources associated with the
* VNIC as well as the VNIC. Reset and release all resources associated with the
* VNIC.
*/
/* Input (24 bytes) */
struct hwrm_vnic_free_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint32_t vnic_id;
/* Logical vnic ID */
uint32_t unused_0;
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_vnic_free_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_vnic_cfg */
/* Description: Configure the RX VNIC structure. */
/* Input (40 bytes) */
struct hwrm_vnic_cfg_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint32_t flags;
/*
* When this bit is '1', the VNIC is requested to be the default
* VNIC for the function.
*/
#define HWRM_VNIC_CFG_INPUT_FLAGS_DEFAULT UINT32_C(0x1)
/*
* When this bit is '1', the VNIC is being configured to strip
* VLAN in the RX path. If set to '0', then VLAN stripping is
* disabled on this VNIC.
*/
#define HWRM_VNIC_CFG_INPUT_FLAGS_VLAN_STRIP_MODE UINT32_C(0x2)
/*
* When this bit is '1', the VNIC is being configured to buffer
* receive packets in the hardware until the host posts new
* receive buffers. If set to '0', then bd_stall is being
* configured to be disabled on this VNIC.
*/
#define HWRM_VNIC_CFG_INPUT_FLAGS_BD_STALL_MODE UINT32_C(0x4)
/*
* When this bit is '1', the VNIC is being configured to receive
* both RoCE and non-RoCE traffic. If set to '0', then this VNIC
* is not configured to be operating in dual VNIC mode.
*/
#define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_DUAL_VNIC_MODE UINT32_C(0x8)
/*
* When this flag is set to '1', the VNIC is requested to be
* configured to receive only RoCE traffic. If this flag is set
* to '0', then this flag shall be ignored by the HWRM. If
* roce_dual_vnic_mode flag is set to '1', then the HWRM client
* shall not set this flag to '1'.
*/
#define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_ONLY_VNIC_MODE UINT32_C(0x10)
/*
* When a VNIC uses one destination ring group for certain
* application (e.g. Receive Flow Steering) where exact match is
* used to direct packets to a VNIC with one destination ring
* group only, there is no need to configure RSS indirection
* table for that VNIC as only one destination ring group is
* used. This flag is used to enable a mode where RSS is enabled
* in the VNIC using a RSS context for computing RSS hash but
* the RSS indirection table is not configured using
* hwrm_vnic_rss_cfg. If this mode is enabled, then the driver
* should not program RSS indirection table for the RSS context
* that is used for computing RSS hash only.
*/
#define HWRM_VNIC_CFG_INPUT_FLAGS_RSS_DFLT_CR_MODE UINT32_C(0x20)
/*
* When this bit is '1', the VNIC is being configured to receive
* both RoCE and non-RoCE traffic, but forward only the RoCE
* traffic further. Also, RoCE traffic can be mirrored to L2
* driver.
*/
#define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_MODE \
UINT32_C(0x40)
uint32_t enables;
/*
* This bit must be '1' for the dflt_ring_grp field to be
* configured.
*/
#define HWRM_VNIC_CFG_INPUT_ENABLES_DFLT_RING_GRP UINT32_C(0x1)
/* This bit must be '1' for the rss_rule field to be configured. */
#define HWRM_VNIC_CFG_INPUT_ENABLES_RSS_RULE UINT32_C(0x2)
/* This bit must be '1' for the cos_rule field to be configured. */
#define HWRM_VNIC_CFG_INPUT_ENABLES_COS_RULE UINT32_C(0x4)
/* This bit must be '1' for the lb_rule field to be configured. */
#define HWRM_VNIC_CFG_INPUT_ENABLES_LB_RULE UINT32_C(0x8)
/* This bit must be '1' for the mru field to be configured. */
#define HWRM_VNIC_CFG_INPUT_ENABLES_MRU UINT32_C(0x10)
uint16_t vnic_id;
/* Logical vnic ID */
uint16_t dflt_ring_grp;
/*
* Default Completion ring for the VNIC. This ring will be
* chosen if packet does not match any RSS rules and if there is
* no COS rule.
*/
uint16_t rss_rule;
/*
* RSS ID for RSS rule/table structure. 0xFF... (All Fs) if
* there is no RSS rule.
*/
uint16_t cos_rule;
/*
* RSS ID for COS rule/table structure. 0xFF... (All Fs) if
* there is no COS rule.
*/
uint16_t lb_rule;
/*
* RSS ID for load balancing rule/table structure. 0xFF... (All
* Fs) if there is no LB rule.
*/
uint16_t mru;
/*
* The maximum receive unit of the vnic. Each vnic is associated
* with a function. The vnic mru value overwrites the mru
* setting of the associated function. The HWRM shall make sure
* that vnic mru does not exceed the mru of the port the
* function is associated with.
*/
uint32_t unused_0;
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_vnic_cfg_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_vnic_qcfg */
/*
* Description: Query the RX VNIC structure. This function can be used by a PF
* driver to query its own VNIC resource or VNIC resource of its child VF. This
* function can also be used by a VF driver to query its own VNIC resource.
*/
/* Input (32 bytes) */
struct hwrm_vnic_qcfg_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint32_t enables;
/* This bit must be '1' for the vf_id_valid field to be configured. */
#define HWRM_VNIC_QCFG_INPUT_ENABLES_VF_ID_VALID UINT32_C(0x1)
uint32_t vnic_id;
/* Logical vnic ID */
uint16_t vf_id;
/* ID of Virtual Function whose VNIC resource is being queried. */
uint16_t unused_0[3];
} __attribute__((packed));
/* Output (32 bytes) */
struct hwrm_vnic_qcfg_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint16_t dflt_ring_grp;
/* Default Completion ring for the VNIC. */
uint16_t rss_rule;
/*
* RSS ID for RSS rule/table structure. 0xFF... (All Fs) if
* there is no RSS rule.
*/
uint16_t cos_rule;
/*
* RSS ID for COS rule/table structure. 0xFF... (All Fs) if
* there is no COS rule.
*/
uint16_t lb_rule;
/*
* RSS ID for load balancing rule/table structure. 0xFF... (All
* Fs) if there is no LB rule.
*/
uint16_t mru;
/* The maximum receive unit of the vnic. */
uint8_t unused_0;
uint8_t unused_1;
uint32_t flags;
/*
* When this bit is '1', the VNIC is the default VNIC for the
* function.
*/
#define HWRM_VNIC_QCFG_OUTPUT_FLAGS_DEFAULT UINT32_C(0x1)
/*
* When this bit is '1', the VNIC is configured to strip VLAN in
* the RX path. If set to '0', then VLAN stripping is disabled
* on this VNIC.
*/
#define HWRM_VNIC_QCFG_OUTPUT_FLAGS_VLAN_STRIP_MODE UINT32_C(0x2)
/*
* When this bit is '1', the VNIC is configured to buffer
* receive packets in the hardware until the host posts new
* receive buffers. If set to '0', then bd_stall is disabled on
* this VNIC.
*/
#define HWRM_VNIC_QCFG_OUTPUT_FLAGS_BD_STALL_MODE UINT32_C(0x4)
/*
* When this bit is '1', the VNIC is configured to receive both
* RoCE and non-RoCE traffic. If set to '0', then this VNIC is
* not configured to operate in dual VNIC mode.
*/
#define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_DUAL_VNIC_MODE UINT32_C(0x8)
/*
* When this flag is set to '1', the VNIC is configured to
* receive only RoCE traffic. When this flag is set to '0', the
* VNIC is not configured to receive only RoCE traffic. If
* roce_dual_vnic_mode flag and this flag both are set to '1',
* then it is an invalid configuration of the VNIC. The HWRM
* should not allow that type of mis-configuration by HWRM
* clients.
*/
#define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_ONLY_VNIC_MODE UINT32_C(0x10)
/*
* When a VNIC uses one destination ring group for certain
* application (e.g. Receive Flow Steering) where exact match is
* used to direct packets to a VNIC with one destination ring
* group only, there is no need to configure RSS indirection
* table for that VNIC as only one destination ring group is
* used. When this bit is set to '1', then the VNIC is enabled
* in a mode where RSS is enabled in the VNIC using a RSS
* context for computing RSS hash but the RSS indirection table
* is not configured.
*/
#define HWRM_VNIC_QCFG_OUTPUT_FLAGS_RSS_DFLT_CR_MODE UINT32_C(0x20)
/*
* When this bit is '1', the VNIC is configured to receive both
* RoCE and non-RoCE traffic, but forward only RoCE traffic
* further. Also RoCE traffic can be mirrored to L2 driver.
*/
#define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_MODE \
UINT32_C(0x40)
uint32_t unused_2;
uint8_t unused_3;
uint8_t unused_4;
uint8_t unused_5;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_vnic_tpa_cfg */
/* Description: This function is used to enable/configure TPA on the VNIC. */
/* Input (40 bytes) */
struct hwrm_vnic_tpa_cfg_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint32_t flags;
/*
* When this bit is '1', the VNIC shall be configured to perform
* transparent packet aggregation (TPA) of non-tunneled TCP
* packets.
*/
#define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_TPA UINT32_C(0x1)
/*
* When this bit is '1', the VNIC shall be configured to perform
* transparent packet aggregation (TPA) of tunneled TCP packets.
*/
#define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_ENCAP_TPA UINT32_C(0x2)
/*
* When this bit is '1', the VNIC shall be configured to perform
* transparent packet aggregation (TPA) according to Windows
* Receive Segment Coalescing (RSC) rules.
*/
#define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_RSC_WND_UPDATE UINT32_C(0x4)
/*
* When this bit is '1', the VNIC shall be configured to perform
* transparent packet aggregation (TPA) according to Linux
* Generic Receive Offload (GRO) rules.
*/
#define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO UINT32_C(0x8)
/*
* When this bit is '1', the VNIC shall be configured to perform
* transparent packet aggregation (TPA) for TCP packets with IP
* ECN set to non-zero.
*/
#define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_WITH_ECN UINT32_C(0x10)
/*
* When this bit is '1', the VNIC shall be configured to perform
* transparent packet aggregation (TPA) for GRE tunneled TCP
* packets only if all packets have the same GRE sequence.
*/
#define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_WITH_SAME_GRE_SEQ \
UINT32_C(0x20)
/*
* When this bit is '1' and the GRO mode is enabled, the VNIC
* shall be configured to perform transparent packet aggregation
* (TPA) for TCP/IPv4 packets with consecutively increasing
* IPIDs. In other words, the last packet that is being
* aggregated to an already existing aggregation context shall
* have IPID 1 more than the IPID of the last packet that was
* aggregated in that aggregation context.
*/
#define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO_IPID_CHECK UINT32_C(0x40)
/*
* When this bit is '1' and the GRO mode is enabled, the VNIC
* shall be configured to perform transparent packet aggregation
* (TPA) for TCP packets with the same TTL (IPv4) or Hop limit
* (IPv6) value.
*/
#define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO_TTL_CHECK UINT32_C(0x80)
uint32_t enables;
/* This bit must be '1' for the max_agg_segs field to be configured. */
#define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGG_SEGS UINT32_C(0x1)
/* This bit must be '1' for the max_aggs field to be configured. */
#define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGGS UINT32_C(0x2)
/*
* This bit must be '1' for the max_agg_timer field to be
* configured.
*/
#define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGG_TIMER UINT32_C(0x4)
/* This bit must be '1' for the min_agg_len field to be configured. */
#define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MIN_AGG_LEN UINT32_C(0x8)
uint16_t vnic_id;
/* Logical vnic ID */
uint16_t max_agg_segs;
/*
* This is the maximum number of TCP segments that can be
* aggregated (unit is Log2). Max value is 31.
*/
/* 1 segment */
#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_1 UINT32_C(0x0)
/* 2 segments */
#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_2 UINT32_C(0x1)
/* 4 segments */
#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_4 UINT32_C(0x2)
/* 8 segments */
#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_8 UINT32_C(0x3)
/* Any segment size larger than this is not valid */
#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_MAX UINT32_C(0x1f)
uint16_t max_aggs;
/*
* This is the maximum number of aggregations this VNIC is
* allowed (unit is Log2). Max value is 7
*/
/* 1 aggregation */
#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_1 UINT32_C(0x0)
/* 2 aggregations */
#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_2 UINT32_C(0x1)
/* 4 aggregations */
#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_4 UINT32_C(0x2)
/* 8 aggregations */
#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_8 UINT32_C(0x3)
/* 16 aggregations */
#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_16 UINT32_C(0x4)
/* Any aggregation size larger than this is not valid */
#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_MAX UINT32_C(0x7)
uint8_t unused_0;
uint8_t unused_1;
uint32_t max_agg_timer;
/*
* This is the maximum amount of time allowed for an aggregation
* context to complete after it was initiated.
*/
uint32_t min_agg_len;
/*
* This is the minimum amount of payload length required to
* start an aggregation context.
*/
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_vnic_tpa_cfg_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_vnic_rss_cfg */
/* Description: This function is used to enable RSS configuration. */
/* Input (48 bytes) */
struct hwrm_vnic_rss_cfg_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint32_t hash_type;
/*
* When this bit is '1', the RSS hash shall be computed over
* source and destination IPv4 addresses of IPv4 packets.
*/
#define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV4 UINT32_C(0x1)
/*
* When this bit is '1', the RSS hash shall be computed over
* source/destination IPv4 addresses and source/destination
* ports of TCP/IPv4 packets.
*/
#define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV4 UINT32_C(0x2)
/*
* When this bit is '1', the RSS hash shall be computed over
* source/destination IPv4 addresses and source/destination
* ports of UDP/IPv4 packets.
*/
#define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV4 UINT32_C(0x4)
/*
* When this bit is '1', the RSS hash shall be computed over
* source and destination IPv4 addresses of IPv6 packets.
*/
#define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV6 UINT32_C(0x8)
/*
* When this bit is '1', the RSS hash shall be computed over
* source/destination IPv6 addresses and source/destination
* ports of TCP/IPv6 packets.
*/
#define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV6 UINT32_C(0x10)
/*
* When this bit is '1', the RSS hash shall be computed over
* source/destination IPv6 addresses and source/destination
* ports of UDP/IPv6 packets.
*/
#define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV6 UINT32_C(0x20)
uint32_t unused_0;
uint64_t ring_grp_tbl_addr;
/* This is the address for rss ring group table */
uint64_t hash_key_tbl_addr;
/* This is the address for rss hash key table */
uint16_t rss_ctx_idx;
/* Index to the rss indirection table. */
uint16_t unused_1[3];
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_vnic_rss_cfg_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_vnic_plcmodes_cfg */
/*
* Description: This function can be used to set placement mode configuration of
* the VNIC.
*/
/* Input (40 bytes) */
struct hwrm_vnic_plcmodes_cfg_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format for the
* rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request will be
* optionally completed on. If the value is -1, then no CR completion
* will be generated. Any other value must be a valid CR ring_id value
* for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
* 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written when the
* request is complete. This area must be 16B aligned and must be
* cleared to zero before the request is made.
*/
uint32_t flags;
/*
* When this bit is '1', the VNIC shall be configured to use regular
* placement algorithm. By default, the regular placement algorithm
* shall be enabled on the VNIC.
*/
#define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_REGULAR_PLACEMENT \
UINT32_C(0x1)
/*
* When this bit is '1', the VNIC shall be configured use the jumbo
* placement algorithm.
*/
#define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_JUMBO_PLACEMENT \
UINT32_C(0x2)
/*
* When this bit is '1', the VNIC shall be configured to enable Header-
* Data split for IPv4 packets according to the following rules: # If
* the packet is identified as TCP/IPv4, then the packet is split at the
* beginning of the TCP payload. # If the packet is identified as
* UDP/IPv4, then the packet is split at the beginning of UDP payload. #
* If the packet is identified as non-TCP and non-UDP IPv4 packet, then
* the packet is split at the beginning of the upper layer protocol
* header carried in the IPv4 packet.
*/
#define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_IPV4 UINT32_C(0x4)
/*
* When this bit is '1', the VNIC shall be configured to enable Header-
* Data split for IPv6 packets according to the following rules: # If
* the packet is identified as TCP/IPv6, then the packet is split at the
* beginning of the TCP payload. # If the packet is identified as
* UDP/IPv6, then the packet is split at the beginning of UDP payload. #
* If the packet is identified as non-TCP and non-UDP IPv6 packet, then
* the packet is split at the beginning of the upper layer protocol
* header carried in the IPv6 packet.
*/
#define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_IPV6 UINT32_C(0x8)
/*
* When this bit is '1', the VNIC shall be configured to enable Header-
* Data split for FCoE packets at the beginning of FC payload.
*/
#define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_FCOE UINT32_C(0x10)
/*
* When this bit is '1', the VNIC shall be configured to enable Header-
* Data split for RoCE packets at the beginning of RoCE payload (after
* BTH/GRH headers).
*/
#define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_ROCE UINT32_C(0x20)
uint32_t enables;
/*
* This bit must be '1' for the jumbo_thresh_valid field to be
* configured.
*/
#define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_JUMBO_THRESH_VALID \
UINT32_C(0x1)
/*
* This bit must be '1' for the hds_offset_valid field to be configured.
*/
#define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_HDS_OFFSET_VALID \
UINT32_C(0x2)
/*
* This bit must be '1' for the hds_threshold_valid field to be
* configured.
*/
#define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_HDS_THRESHOLD_VALID \
UINT32_C(0x4)
uint32_t vnic_id;
/* Logical vnic ID */
uint16_t jumbo_thresh;
/*
* When jumbo placement algorithm is enabled, this value is used to
* determine the threshold for jumbo placement. Packets with length
* larger than this value will be placed according to the jumbo
* placement algorithm.
*/
uint16_t hds_offset;
/*
* This value is used to determine the offset into packet buffer where
* the split data (payload) will be placed according to one of of HDS
* placement algorithm. The lengths of packet buffers provided for split
* data shall be larger than this value.
*/
uint16_t hds_threshold;
/*
* When one of the HDS placement algorithm is enabled, this value is
* used to determine the threshold for HDS placement. Packets with
* length larger than this value will be placed according to the HDS
* placement algorithm. This value shall be in multiple of 4 bytes.
*/
uint16_t unused_0[3];
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_vnic_plcmodes_cfg_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in parameters,
* and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last byte of
* the response is a valid flag that will read as '1' when the command
* has been completely written to memory.
*/
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the output is
* completely written to RAM. This field should be read as '1' to
* indicate that the output has been completely written. When writing a
* command completion or response to an internal processor, the order of
* writes has to be such that this field is written last.
*/
} __attribute__((packed));
/* hwrm_vnic_plcmodes_qcfg */
/*
* Description: This function can be used to query placement mode configuration
* of the VNIC.
*/
/* Input (24 bytes) */
struct hwrm_vnic_plcmodes_qcfg_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format for the
* rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request will be
* optionally completed on. If the value is -1, then no CR completion
* will be generated. Any other value must be a valid CR ring_id value
* for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
* 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written when the
* request is complete. This area must be 16B aligned and must be
* cleared to zero before the request is made.
*/
uint32_t vnic_id;
/* Logical vnic ID */
uint32_t unused_0;
} __attribute__((packed));
/* Output (24 bytes) */
struct hwrm_vnic_plcmodes_qcfg_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in parameters,
* and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last byte of
* the response is a valid flag that will read as '1' when the command
* has been completely written to memory.
*/
uint32_t flags;
/*
* When this bit is '1', the VNIC is configured to use regular placement
* algorithm.
*/
#define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_REGULAR_PLACEMENT \
UINT32_C(0x1)
/*
* When this bit is '1', the VNIC is configured to use the jumbo
* placement algorithm.
*/
#define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_JUMBO_PLACEMENT \
UINT32_C(0x2)
/*
* When this bit is '1', the VNIC is configured to enable Header-Data
* split for IPv4 packets.
*/
#define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_IPV4 UINT32_C(0x4)
/*
* When this bit is '1', the VNIC is configured to enable Header-Data
* split for IPv6 packets.
*/
#define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_IPV6 UINT32_C(0x8)
/*
* When this bit is '1', the VNIC is configured to enable Header-Data
* split for FCoE packets.
*/
#define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_FCOE UINT32_C(0x10)
/*
* When this bit is '1', the VNIC is configured to enable Header-Data
* split for RoCE packets.
*/
#define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_ROCE UINT32_C(0x20)
/*
* When this bit is '1', the VNIC is configured to be the default VNIC
* of the requesting function.
*/
#define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_DFLT_VNIC UINT32_C(0x40)
uint16_t jumbo_thresh;
/*
* When jumbo placement algorithm is enabled, this value is used to
* determine the threshold for jumbo placement. Packets with length
* larger than this value will be placed according to the jumbo
* placement algorithm.
*/
uint16_t hds_offset;
/*
* This value is used to determine the offset into packet buffer where
* the split data (payload) will be placed according to one of of HDS
* placement algorithm. The lengths of packet buffers provided for split
* data shall be larger than this value.
*/
uint16_t hds_threshold;
/*
* When one of the HDS placement algorithm is enabled, this value is
* used to determine the threshold for HDS placement. Packets with
* length larger than this value will be placed according to the HDS
* placement algorithm. This value shall be in multiple of 4 bytes.
*/
uint8_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t unused_4;
uint8_t valid;
/*
* This field is used in Output records to indicate that the output is
* completely written to RAM. This field should be read as '1' to
* indicate that the output has been completely written. When writing a
* command completion or response to an internal processor, the order of
* writes has to be such that this field is written last.
*/
} __attribute__((packed));
/* hwrm_vnic_rss_cos_lb_ctx_alloc */
/* Description: This function is used to allocate COS/Load Balance context. */
/* Input (16 bytes) */
struct hwrm_vnic_rss_cos_lb_ctx_alloc_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_vnic_rss_cos_lb_ctx_alloc_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint16_t rss_cos_lb_ctx_id;
/* rss_cos_lb_ctx_id is 16 b */
uint8_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t unused_4;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_vnic_rss_cos_lb_ctx_free */
/* Description: This function can be used to free COS/Load Balance context. */
/* Input (24 bytes) */
struct hwrm_vnic_rss_cos_lb_ctx_free_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint16_t rss_cos_lb_ctx_id;
/* rss_cos_lb_ctx_id is 16 b */
uint16_t unused_0[3];
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_vnic_rss_cos_lb_ctx_free_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_ring_alloc */
/*
* Description: This command allocates and does basic preparation for a ring.
*/
/* Input (80 bytes) */
struct hwrm_ring_alloc_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint32_t enables;
/* This bit must be '1' for the Reserved1 field to be configured. */
#define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED1 UINT32_C(0x1)
/* This bit must be '1' for the ring_arb_cfg field to be configured. */
#define HWRM_RING_ALLOC_INPUT_ENABLES_RING_ARB_CFG UINT32_C(0x2)
/* This bit must be '1' for the Reserved3 field to be configured. */
#define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED3 UINT32_C(0x4)
/*
* This bit must be '1' for the stat_ctx_id_valid field to be
* configured.
*/
#define HWRM_RING_ALLOC_INPUT_ENABLES_STAT_CTX_ID_VALID UINT32_C(0x8)
/* This bit must be '1' for the Reserved4 field to be configured. */
#define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED4 UINT32_C(0x10)
/* This bit must be '1' for the max_bw_valid field to be configured. */
#define HWRM_RING_ALLOC_INPUT_ENABLES_MAX_BW_VALID UINT32_C(0x20)
uint8_t ring_type;
/* Ring Type. */
/* L2 Completion Ring (CR) */
#define HWRM_RING_ALLOC_INPUT_RING_TYPE_L2_CMPL UINT32_C(0x0)
/* TX Ring (TR) */
#define HWRM_RING_ALLOC_INPUT_RING_TYPE_TX UINT32_C(0x1)
/* RX Ring (RR) */
#define HWRM_RING_ALLOC_INPUT_RING_TYPE_RX UINT32_C(0x2)
/* RoCE Notification Completion Ring (ROCE_CR) */
#define HWRM_RING_ALLOC_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3)
uint8_t unused_0;
uint16_t unused_1;
uint64_t page_tbl_addr;
/* This value is a pointer to the page table for the Ring. */
uint32_t fbo;
/* First Byte Offset of the first entry in the first page. */
uint8_t page_size;
/*
* Actual page size in 2^page_size. The supported range is
* increments in powers of 2 from 16 bytes to 1GB. - 4 = 16 B
* Page size is 16 B. - 12 = 4 KB Page size is 4 KB. - 13 = 8 KB
* Page size is 8 KB. - 16 = 64 KB Page size is 64 KB. - 21 = 2
* MB Page size is 2 MB. - 22 = 4 MB Page size is 4 MB. - 30 = 1
* GB Page size is 1 GB.
*/
uint8_t page_tbl_depth;
/*
* This value indicates the depth of page table. For this
* version of the specification, value other than 0 or 1 shall
* be considered as an invalid value. When the page_tbl_depth =
* 0, then it is treated as a special case with the following.
* 1. FBO and page size fields are not valid. 2. page_tbl_addr
* is the physical address of the first element of the ring.
*/
uint8_t unused_2;
uint8_t unused_3;
uint32_t length;
/*
* Number of 16B units in the ring. Minimum size for a ring is
* 16 16B entries.
*/
uint16_t logical_id;
/*
* Logical ring number for the ring to be allocated. This value
* determines the position in the doorbell area where the update
* to the ring will be made. For completion rings, this value is
* also the MSI-X vector number for the function the completion
* ring is associated with.
*/
uint16_t cmpl_ring_id;
/*
* This field is used only when ring_type is a TX ring. This
* value indicates what completion ring the TX ring is
* associated with.
*/
uint16_t queue_id;
/*
* This field is used only when ring_type is a TX ring. This
* value indicates what CoS queue the TX ring is associated
* with.
*/
uint8_t unused_4;
uint8_t unused_5;
uint32_t reserved1;
/* This field is reserved for the future use. It shall be set to 0. */
uint16_t ring_arb_cfg;
/*
* This field is used only when ring_type is a TX ring. This
* field is used to configure arbitration related parameters for
* a TX ring.
*/
/* Arbitration policy used for the ring. */
#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_MASK UINT32_C(0xf)
#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_SFT 0
/*
* Use strict priority for the TX ring. Priority
* value is specified in arb_policy_param
*/
#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_SP \
(UINT32_C(0x1) << 0)
/*
* Use weighted fair queue arbitration for the
* TX ring. Weight is specified in
* arb_policy_param
*/
#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_WFQ \
(UINT32_C(0x2) << 0)
#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_LAST \
RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_WFQ
/* Reserved field. */
#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_RSVD_MASK UINT32_C(0xf0)
#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_RSVD_SFT 4
/*
* Arbitration policy specific parameter. # For strict priority
* arbitration policy, this field represents a priority value.
* If set to 0, then the priority is not specified and the HWRM
* is allowed to select any priority for this TX ring. # For
* weighted fair queue arbitration policy, this field represents
* a weight value. If set to 0, then the weight is not specified
* and the HWRM is allowed to select any weight for this TX
* ring.
*/
#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_PARAM_MASK \
UINT32_C(0xff00)
#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_PARAM_SFT 8
uint8_t unused_6;
uint8_t unused_7;
uint32_t reserved3;
/* This field is reserved for the future use. It shall be set to 0. */
uint32_t stat_ctx_id;
/*
* This field is used only when ring_type is a TX ring. This
* input indicates what statistics context this ring should be
* associated with.
*/
uint32_t reserved4;
/* This field is reserved for the future use. It shall be set to 0. */
uint32_t max_bw;
/*
* This field is used only when ring_type is a TX ring to
* specify maximum BW allocated to the TX ring. The HWRM will
* translate this value into byte counter and time interval used
* for this ring inside the device.
*/
/* The bandwidth value. */
#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_MASK UINT32_C(0xfffffff)
#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_SFT 0
/* The granularity of the value (bits or bytes). */
#define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE UINT32_C(0x10000000)
/* Value is in bits. */
#define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BITS (UINT32_C(0x0) << 28)
/* Value is in bytes. */
#define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BYTES (UINT32_C(0x1) << 28)
#define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_LAST \
RING_ALLOC_INPUT_MAX_BW_SCALE_BYTES
/* bw_value_unit is 3 b */
#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_MASK \
UINT32_C(0xe0000000)
#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_SFT 29
/* Value is in Mb or MB (base 10). */
#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_MEGA \
(UINT32_C(0x0) << 29)
/* Value is in Kb or KB (base 10). */
#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_KILO \
(UINT32_C(0x2) << 29)
/* Value is in bits or bytes. */
#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_BASE \
(UINT32_C(0x4) << 29)
/* Value is in Gb or GB (base 10). */
#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_GIGA \
(UINT32_C(0x6) << 29)
/* Value is in 1/100th of a percentage of total bandwidth. */
#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
(UINT32_C(0x1) << 29)
/* Invalid unit */
#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID \
(UINT32_C(0x7) << 29)
#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_LAST \
RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID
uint8_t int_mode;
/*
* This field is used only when ring_type is a Completion ring.
* This value indicates what interrupt mode should be used on
* this completion ring. Note: In the legacy interrupt mode, no
* more than 16 completion rings are allowed.
*/
/* Legacy INTA */
#define HWRM_RING_ALLOC_INPUT_INT_MODE_LEGACY UINT32_C(0x0)
/* Reserved */
#define HWRM_RING_ALLOC_INPUT_INT_MODE_RSVD UINT32_C(0x1)
/* MSI-X */
#define HWRM_RING_ALLOC_INPUT_INT_MODE_MSIX UINT32_C(0x2)
/* No Interrupt - Polled mode */
#define HWRM_RING_ALLOC_INPUT_INT_MODE_POLL UINT32_C(0x3)
uint8_t unused_8[3];
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_ring_alloc_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint16_t ring_id;
/*
* Physical number of ring allocated. This value shall be unique
* for a ring type.
*/
uint16_t logical_ring_id;
/* Logical number of ring allocated. */
uint8_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_ring_free */
/*
* Description: This command is used to free a ring and associated resources.
* With QoS and DCBx agents, it is possible the traffic classes will be moved
* from one CoS queue to another. When this occurs, the driver shall call
* 'hwrm_ring_free' to free the allocated rings and then call 'hwrm_ring_alloc'
* to re-allocate each ring and assign it to a new CoS queue. hwrm_ring_free
* shall be called on a ring only after it has been idle for 500ms or more and
* no frames have been posted to the ring during this time. All frames queued
* for transmission shall be completed and at least 500ms time elapsed from the
* last completion before calling this command.
*/
/* Input (24 bytes) */
struct hwrm_ring_free_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint8_t ring_type;
/* Ring Type. */
/* L2 Completion Ring (CR) */
#define HWRM_RING_FREE_INPUT_RING_TYPE_L2_CMPL UINT32_C(0x0)
/* TX Ring (TR) */
#define HWRM_RING_FREE_INPUT_RING_TYPE_TX UINT32_C(0x1)
/* RX Ring (RR) */
#define HWRM_RING_FREE_INPUT_RING_TYPE_RX UINT32_C(0x2)
/* RoCE Notification Completion Ring (ROCE_CR) */
#define HWRM_RING_FREE_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3)
uint8_t unused_0;
uint16_t ring_id;
/* Physical number of ring allocated. */
uint32_t unused_1;
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_ring_free_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_ring_grp_alloc */
/*
* Description: This API allocates and does basic preparation for a ring group.
*/
/* Input (24 bytes) */
struct hwrm_ring_grp_alloc_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint16_t cr;
/* This value identifies the CR associated with the ring group. */
uint16_t rr;
/* This value identifies the main RR associated with the ring group. */
uint16_t ar;
/*
* This value identifies the aggregation RR associated with the
* ring group. If this value is 0xFF... (All Fs), then no
* Aggregation ring will be set.
*/
uint16_t sc;
/*
* This value identifies the statistics context associated with
* the ring group.
*/
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_ring_grp_alloc_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t ring_group_id;
/*
* This is the ring group ID value. Use this value to program
* the default ring group for the VNIC or as table entries in an
* RSS/COS context.
*/
uint8_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_ring_grp_free */
/*
* Description: This API frees a ring group and associated resources. # If a
* ring in the ring group is reset or free, then the associated rings in the
* ring group shall also be reset/free using hwrm_ring_free. # A function driver
* shall always use hwrm_ring_grp_free after freeing all rings in a group. # As
* a part of executing this command, the HWRM shall reset all associated ring
* group resources.
*/
/* Input (24 bytes) */
struct hwrm_ring_grp_free_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint32_t ring_group_id;
/* This is the ring group ID value. */
uint32_t unused_0;
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_ring_grp_free_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_cfa_l2_filter_alloc */
/*
* Description: An L2 filter is a filter resource that is used to identify a
* vnic or ring for a packet based on layer 2 fields. Layer 2 fields for
* encapsulated packets include both outer L2 header and/or inner l2 header of
* encapsulated packet. The L2 filter resource covers the following OS specific
* L2 filters. Linux/FreeBSD (per function): # Broadcast enable/disable # List
* of individual multicast filters # All multicast enable/disable filter #
* Unicast filters # Promiscuous mode VMware: # Broadcast enable/disable (per
* physical function) # All multicast enable/disable (per function) # Unicast
* filters per ring or vnic # Promiscuous mode per PF Windows: # Broadcast
* enable/disable (per physical function) # List of individual multicast filters
* (Driver needs to advertise the maximum number of filters supported) # All
* multicast enable/disable per physical function # Unicast filters per vnic #
* Promiscuous mode per PF Implementation notes on the use of VNIC in this
* command: # By default, these filters belong to default vnic for the function.
* # Once these filters are set up, only destination VNIC can be modified. # If
* the destination VNIC is not specified in this command, then the HWRM shall
* only create an l2 context id. HWRM Implementation notes for multicast
* filters: # The hwrm_filter_alloc command can be used to set up multicast
* filters (perfect match or partial match). Each individual function driver can
* set up multicast filters independently. # The HWRM needs to keep track of
* multicast filters set up by function drivers and maintain multicast group
* replication records to enable a subset of functions to receive traffic for a
* specific multicast address. # When a specific multicast filter cannot be set,
* the HWRM shall return an error. In this error case, the driver should fall
* back to using one general filter (rather than specific) for all multicast
* traffic. # When the SR-IOV is enabled, the HWRM needs to additionally track
* source knockout per multicast group record. Examples of setting unicast
* filters: For a unicast MAC based filter, one can use a combination of the
* fields and masks provided in this command to set up the filter. Below are
* some examples: # MAC + no VLAN filter: This filter is used to identify
* traffic that does not contain any VLAN tags and matches destination (or
* source) MAC address. This filter can be set up by setting only l2_addr field
* to be a valid field. All other fields are not valid. The following value is
* set for l2_addr. l2_addr = MAC # MAC + Any VLAN filter: This filter is used
* to identify traffic that carries single VLAN tag and matches (destination or
* source) MAC address. This filter can be set up by setting only l2_addr and
* l2_ovlan_mask fields to be valid fields. All other fields are not valid. The
* following values are set for those two valid fields. l2_addr = MAC,
* l2_ovlan_mask = 0xFFFF # MAC + no VLAN or VLAN ID=0: This filter is used to
* identify untagged traffic that does not contain any VLAN tags or a VLAN tag
* with VLAN ID = 0 and matches destination (or source) MAC address. This filter
* can be set up by setting only l2_addr and l2_ovlan fields to be valid fields.
* All other fields are not valid. The following value are set for l2_addr and
* l2_ovlan. l2_addr = MAC, l2_ovlan = 0x0 # MAC + no VLAN or any VLAN: This
* filter is used to identify traffic that contains zero or 1 VLAN tag and
* matches destination (or source) MAC address. This filter can be set up by
* setting only l2_addr, l2_ovlan, and l2_mask fields to be valid fields. All
* other fields are not valid. The following value are set for l2_addr,
* l2_ovlan, and l2_mask fields. l2_addr = MAC, l2_ovlan = 0x0, l2_ovlan_mask =
* 0xFFFF # MAC + VLAN ID filter: This filter can be set up by setting only
* l2_addr, l2_ovlan, and l2_ovlan_mask fields to be valid fields. All other
* fields are not valid. The following values are set for those three valid
* fields. l2_addr = MAC, l2_ovlan = VLAN ID, l2_ovlan_mask = 0xF000
*/
/* Input (96 bytes) */
struct hwrm_cfa_l2_filter_alloc_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint32_t flags;
/*
* Enumeration denoting the RX, TX type of the resource. This
* enumeration is used for resources that are similar for both
* TX and RX paths of the chip.
*/
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH UINT32_C(0x1)
/* tx path */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_TX \
(UINT32_C(0x0) << 0)
/* rx path */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX \
(UINT32_C(0x1) << 0)
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_LAST \
CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX
/*
* Setting of this flag indicates the applicability to the
* loopback path.
*/
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK UINT32_C(0x2)
/*
* Setting of this flag indicates drop action. If this flag is
* not set, then it should be considered accept action.
*/
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_DROP UINT32_C(0x4)
/*
* If this flag is set, all t_l2_* fields are invalid and they
* should not be specified. If this flag is set, then l2_*
* fields refer to fields of outermost L2 header.
*/
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_OUTERMOST UINT32_C(0x8)
uint32_t enables;
/* This bit must be '1' for the l2_addr field to be configured. */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR UINT32_C(0x1)
/* This bit must be '1' for the l2_addr_mask field to be configured. */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR_MASK \
UINT32_C(0x2)
/* This bit must be '1' for the l2_ovlan field to be configured. */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN UINT32_C(0x4)
/*
* This bit must be '1' for the l2_ovlan_mask field to be
* configured.
*/
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN_MASK \
UINT32_C(0x8)
/* This bit must be '1' for the l2_ivlan field to be configured. */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN UINT32_C(0x10)
/*
* This bit must be '1' for the l2_ivlan_mask field to be
* configured.
*/
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN_MASK \
UINT32_C(0x20)
/* This bit must be '1' for the t_l2_addr field to be configured. */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR UINT32_C(0x40)
/*
* This bit must be '1' for the t_l2_addr_mask field to be
* configured.
*/
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR_MASK \
UINT32_C(0x80)
/* This bit must be '1' for the t_l2_ovlan field to be configured. */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN \
UINT32_C(0x100)
/*
* This bit must be '1' for the t_l2_ovlan_mask field to be
* configured.
*/
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN_MASK \
UINT32_C(0x200)
/* This bit must be '1' for the t_l2_ivlan field to be configured. */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN \
UINT32_C(0x400)
/*
* This bit must be '1' for the t_l2_ivlan_mask field to be
* configured.
*/
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN_MASK \
UINT32_C(0x800)
/* This bit must be '1' for the src_type field to be configured. */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_TYPE UINT32_C(0x1000)
/* This bit must be '1' for the src_id field to be configured. */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_ID UINT32_C(0x2000)
/* This bit must be '1' for the tunnel_type field to be configured. */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \
UINT32_C(0x4000)
/* This bit must be '1' for the dst_id field to be configured. */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_DST_ID UINT32_C(0x8000)
/*
* This bit must be '1' for the mirror_vnic_id field to be
* configured.
*/
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \
UINT32_C(0x10000)
uint8_t l2_addr[6];
/*
* This value sets the match value for the L2 MAC address.
* Destination MAC address for RX path. Source MAC address for
* TX path.
*/
uint8_t unused_0;
uint8_t unused_1;
uint8_t l2_addr_mask[6];
/*
* This value sets the mask value for the L2 address. A value of
* 0 will mask the corresponding bit from compare.
*/
uint16_t l2_ovlan;
/* This value sets VLAN ID value for outer VLAN. */
uint16_t l2_ovlan_mask;
/*
* This value sets the mask value for the ovlan id. A value of 0
* will mask the corresponding bit from compare.
*/
uint16_t l2_ivlan;
/* This value sets VLAN ID value for inner VLAN. */
uint16_t l2_ivlan_mask;
/*
* This value sets the mask value for the ivlan id. A value of 0
* will mask the corresponding bit from compare.
*/
uint8_t unused_2;
uint8_t unused_3;
uint8_t t_l2_addr[6];
/*
* This value sets the match value for the tunnel L2 MAC
* address. Destination MAC address for RX path. Source MAC
* address for TX path.
*/
uint8_t unused_4;
uint8_t unused_5;
uint8_t t_l2_addr_mask[6];
/*
* This value sets the mask value for the tunnel L2 address. A
* value of 0 will mask the corresponding bit from compare.
*/
uint16_t t_l2_ovlan;
/* This value sets VLAN ID value for tunnel outer VLAN. */
uint16_t t_l2_ovlan_mask;
/*
* This value sets the mask value for the tunnel ovlan id. A
* value of 0 will mask the corresponding bit from compare.
*/
uint16_t t_l2_ivlan;
/* This value sets VLAN ID value for tunnel inner VLAN. */
uint16_t t_l2_ivlan_mask;
/*
* This value sets the mask value for the tunnel ivlan id. A
* value of 0 will mask the corresponding bit from compare.
*/
uint8_t src_type;
/* This value identifies the type of source of the packet. */
/* Network port */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_NPORT UINT32_C(0x0)
/* Physical function */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_PF UINT32_C(0x1)
/* Virtual function */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VF UINT32_C(0x2)
/* Virtual NIC of a function */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VNIC UINT32_C(0x3)
/* Embedded processor for CFA management */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_KONG UINT32_C(0x4)
/* Embedded processor for OOB management */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_APE UINT32_C(0x5)
/* Embedded processor for RoCE */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_BONO UINT32_C(0x6)
/* Embedded processor for network proxy functions */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_TANG UINT32_C(0x7)
uint8_t unused_6;
uint32_t src_id;
/*
* This value is the id of the source. For a network port, it
* represents port_id. For a physical function, it represents
* fid. For a virtual function, it represents vf_id. For a vnic,
* it represents vnic_id. For embedded processors, this id is
* not valid. Notes: 1. The function ID is implied if it src_id
* is not provided for a src_type that is either
*/
uint8_t tunnel_type;
/* Tunnel Type. */
/* Non-tunnel */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
UINT32_C(0x0)
/* Virtual eXtensible Local Area Network (VXLAN) */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
UINT32_C(0x1)
/*
* Network Virtualization Generic Routing
* Encapsulation (NVGRE)
*/
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
UINT32_C(0x2)
/*
* Generic Routing Encapsulation (GRE) inside
* Ethernet payload
*/
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE UINT32_C(0x3)
/* IP in IP */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP UINT32_C(0x4)
/* Generic Network Virtualization Encapsulation (Geneve) */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE UINT32_C(0x5)
/* Multi-Protocol Lable Switching (MPLS) */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS UINT32_C(0x6)
/* Stateless Transport Tunnel (STT) */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT UINT32_C(0x7)
/*
* Generic Routing Encapsulation (GRE) inside IP
* datagram payload
*/
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE UINT32_C(0x8)
/*
* IPV4 over virtual eXtensible Local Area
* Network (IPV4oVXLAN)
*/
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
UINT32_C(0x9)
/* Any tunneled traffic */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
UINT32_C(0xff)
uint8_t unused_7;
uint16_t dst_id;
/*
* If set, this value shall represent the Logical VNIC ID of the
* destination VNIC for the RX path and network port id of the
* destination port for the TX path.
*/
uint16_t mirror_vnic_id;
/* Logical VNIC ID of the VNIC where traffic is mirrored. */
uint8_t pri_hint;
/*
* This hint is provided to help in placing the filter in the
* filter table.
*/
/* No preference */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_NO_PREFER \
UINT32_C(0x0)
/* Above the given filter */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_ABOVE_FILTER \
UINT32_C(0x1)
/* Below the given filter */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_BELOW_FILTER \
UINT32_C(0x2)
/* As high as possible */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MAX UINT32_C(0x3)
/* As low as possible */
#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MIN UINT32_C(0x4)
uint8_t unused_8;
uint32_t unused_9;
uint64_t l2_filter_id_hint;
/*
* This is the ID of the filter that goes along with the
* pri_hint. This field is valid only for the following values.
* 1 - Above the given filter 2 - Below the given filter
*/
} __attribute__((packed));
/* Output (24 bytes) */
struct hwrm_cfa_l2_filter_alloc_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint64_t l2_filter_id;
/*
* This value identifies a set of CFA data structures used for
* an L2 context.
*/
uint32_t flow_id;
/*
* This is the ID of the flow associated with this filter. This
* value shall be used to match and associate the flow
* identifier returned in completion records. A value of
* 0xFFFFFFFF shall indicate no flow id.
*/
uint8_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_cfa_l2_filter_free */
/*
* Description: Free a L2 filter. The HWRM shall free all associated filter
* resources with the L2 filter.
*/
/* Input (24 bytes) */
struct hwrm_cfa_l2_filter_free_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint64_t l2_filter_id;
/*
* This value identifies a set of CFA data structures used for
* an L2 context.
*/
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_cfa_l2_filter_free_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_cfa_l2_filter_cfg */
/* Description: Change the configuration of an existing L2 filter */
/* Input (40 bytes) */
struct hwrm_cfa_l2_filter_cfg_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint32_t flags;
/*
* Enumeration denoting the RX, TX type of the resource. This
* enumeration is used for resources that are similar for both
* TX and RX paths of the chip.
*/
#define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH UINT32_C(0x1)
/* tx path */
#define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_TX \
(UINT32_C(0x0) << 0)
/* rx path */
#define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_RX \
(UINT32_C(0x1) << 0)
#define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_LAST \
CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_RX
/*
* Setting of this flag indicates drop action. If this flag is
* not set, then it should be considered accept action.
*/
#define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_DROP UINT32_C(0x2)
uint32_t enables;
/* This bit must be '1' for the dst_id field to be configured. */
#define HWRM_CFA_L2_FILTER_CFG_INPUT_ENABLES_DST_ID UINT32_C(0x1)
/*
* This bit must be '1' for the new_mirror_vnic_id field to be
* configured.
*/
#define HWRM_CFA_L2_FILTER_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID \
UINT32_C(0x2)
uint64_t l2_filter_id;
/*
* This value identifies a set of CFA data structures used for
* an L2 context.
*/
uint32_t dst_id;
/*
* If set, this value shall represent the Logical VNIC ID of the
* destination VNIC for the RX path and network port id of the
* destination port for the TX path.
*/
uint32_t new_mirror_vnic_id;
/* New Logical VNIC ID of the VNIC where traffic is mirrored. */
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_cfa_l2_filter_cfg_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_cfa_l2_set_rx_mask */
/* Description: This command will set rx mask of the function. */
/* Input (56 bytes) */
struct hwrm_cfa_l2_set_rx_mask_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint32_t vnic_id;
/* VNIC ID */
uint32_t mask;
/* Reserved for future use. */
#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_RESERVED UINT32_C(0x1)
/*
* When this bit is '1', the function is requested to accept
* multi-cast packets specified by the multicast addr table.
*/
#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_MCAST UINT32_C(0x2)
/*
* When this bit is '1', the function is requested to accept all
* multi-cast packets.
*/
#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ALL_MCAST UINT32_C(0x4)
/*
* When this bit is '1', the function is requested to accept
* broadcast packets.
*/
#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_BCAST UINT32_C(0x8)
/*
* When this bit is '1', the function is requested to be put in
* the promiscuous mode. The HWRM should accept any function to
* set up promiscuous mode. The HWRM shall follow the semantics
* below for the promiscuous mode support. # When partitioning
* is not enabled on a port (i.e. single PF on the port), then
* the PF shall be allowed to be in the promiscuous mode. When
* the PF is in the promiscuous mode, then it shall receive all
* host bound traffic on that port. # When partitioning is
* enabled on a port (i.e. multiple PFs per port) and a PF on
* that port is in the promiscuous mode, then the PF receives
* all traffic within that partition as identified by a unique
* identifier for the PF (e.g. S-Tag). If a unique outer VLAN
* for the PF is specified, then the setting of promiscuous mode
* on that PF shall result in the PF receiving all host bound
* traffic with matching outer VLAN. # A VF shall can be set in
* the promiscuous mode. In the promiscuous mode, the VF does
* not receive any traffic unless a unique outer VLAN for the VF
* is specified. If a unique outer VLAN for the VF is specified,
* then the setting of promiscuous mode on that VF shall result
* in the VF receiving all host bound traffic with the matching
* outer VLAN. # The HWRM shall allow the setting of promiscuous
* mode on a function independently from the promiscuous mode
* settings on other functions.
*/
#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_PROMISCUOUS UINT32_C(0x10)
/*
* If this flag is set, the corresponding RX filters shall be
* set up to cover multicast/broadcast filters for the outermost
* Layer 2 destination MAC address field.
*/
#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_OUTERMOST UINT32_C(0x20)
/*
* If this flag is set, the corresponding RX filters shall be
* set up to cover multicast/broadcast filters for the VLAN-
* tagged packets that match the TPID and VID fields of VLAN
* tags in the VLAN tag table specified in this command.
*/
#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLANONLY UINT32_C(0x40)
/*
* If this flag is set, the corresponding RX filters shall be
* set up to cover multicast/broadcast filters for non-VLAN
* tagged packets and VLAN-tagged packets that match the TPID
* and VID fields of VLAN tags in the VLAN tag table specified
* in this command.
*/
#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLAN_NONVLAN UINT32_C(0x80)
/*
* If this flag is set, the corresponding RX filters shall be
* set up to cover multicast/broadcast filters for non-VLAN
* tagged packets and VLAN-tagged packets matching any VLAN tag.
* If this flag is set, then the HWRM shall ignore VLAN tags
* specified in vlan_tag_tbl. If none of vlanonly, vlan_nonvlan,
* and anyvlan_nonvlan flags is set, then the HWRM shall ignore
* VLAN tags specified in vlan_tag_tbl. The HWRM client shall
* set at most one flag out of vlanonly, vlan_nonvlan, and
* anyvlan_nonvlan.
*/
#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ANYVLAN_NONVLAN \
UINT32_C(0x100)
uint64_t mc_tbl_addr;
/* This is the address for mcast address tbl. */
uint32_t num_mc_entries;
/*
* This value indicates how many entries in mc_tbl are valid.
* Each entry is 6 bytes.
*/
uint32_t unused_0;
uint64_t vlan_tag_tbl_addr;
/*
* This is the address for VLAN tag table. Each VLAN entry in
* the table is 4 bytes of a VLAN tag including TPID, PCP, DEI,
* and VID fields in network byte order.
*/
uint32_t num_vlan_tags;
/*
* This value indicates how many entries in vlan_tag_tbl are
* valid. Each entry is 4 bytes.
*/
uint32_t unused_1;
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_cfa_l2_set_rx_mask_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* Command specific Error Codes (8 bytes) */
struct hwrm_cfa_l2_set_rx_mask_cmd_err {
uint8_t code;
/*
* command specific error codes that goes to the cmd_err field
* in Common HWRM Error Response.
*/
/* Unknown error */
#define HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0)
/*
* Unable to complete operation due to conflict
* with Ntuple Filter
*/
#define \
HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_NTUPLE_FILTER_CONFLICT_ERR \
UINT32_C(0x1)
uint8_t unused_0[7];
} __attribute__((packed));
/* hwrm_cfa_vlan_antispoof_cfg */
/* Description: Configures vlan anti-spoof filters for VF. */
/* Input (32 bytes) */
struct hwrm_cfa_vlan_antispoof_cfg_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format for the
* rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request will be
* optionally completed on. If the value is -1, then no CR completion
* will be generated. Any other value must be a valid CR ring_id value
* for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
* 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written when the
* request is complete. This area must be 16B aligned and must be
* cleared to zero before the request is made.
*/
uint16_t fid;
/*
* Function ID of the function that is being configured. Only valid for
* a VF FID configured by the PF.
*/
uint8_t unused_0;
uint8_t unused_1;
uint32_t num_vlan_entries;
/* Number of VLAN entries in the vlan_tag_mask_tbl. */
uint64_t vlan_tag_mask_tbl_addr;
/*
* The vlan_tag_mask_tbl_addr is the DMA address of the VLAN antispoof
* table. Each table entry contains the 16-bit TPID (0x8100 or 0x88a8
* only), 16-bit VLAN ID, and a 16-bit mask, all in network order to
* match hwrm_cfa_l2_set_rx_mask. For an individual VLAN entry, the mask
* value should be 0xfff for the 12-bit VLAN ID.
*/
};
/* Output (16 bytes) */
struct hwrm_cfa_vlan_antispoof_cfg_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in parameters,
* and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last byte of
* the response is a valid flag that will read as '1' when the command
* has been completely written to memory.
*/
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the output is
* completely written to RAM. This field should be read as '1' to
* indicate that the output has been completely written. When writing a
* command completion or response to an internal processor, the order of
* writes has to be such that this field is written last.
*/
};
/* hwrm_cfa_ntuple_filter_alloc */
/*
* Description: This is a ntuple filter that uses fields from L4/L3 header and
* optionally fields from L2. The ntuple filters apply to receive traffic only.
* All L2/L3/L4 header fields are specified in network byte order. These filters
* can be used for Receive Flow Steering (RFS). # For ethertype value, only
* 0x0800 (IPv4) and 0x86dd (IPv6) shall be supported for ntuple filters. # If a
* field specified in this command is not enabled as a valid field, then that
* field shall not be used in matching packet header fields against this filter.
*/
/* Input (128 bytes) */
struct hwrm_cfa_ntuple_filter_alloc_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint32_t flags;
/*
* Setting of this flag indicates the applicability to the
* loopback path.
*/
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK \
UINT32_C(0x1)
/*
* Setting of this flag indicates drop action. If this flag is
* not set, then it should be considered accept action.
*/
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_DROP UINT32_C(0x2)
/*
* Setting of this flag indicates that a meter is expected to be
* attached to this flow. This hint can be used when choosing
* the action record format required for the flow.
*/
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_METER UINT32_C(0x4)
uint32_t enables;
/* This bit must be '1' for the l2_filter_id field to be configured. */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_L2_FILTER_ID \
UINT32_C(0x1)
/* This bit must be '1' for the ethertype field to be configured. */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_ETHERTYPE \
UINT32_C(0x2)
/* This bit must be '1' for the tunnel_type field to be configured. */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \
UINT32_C(0x4)
/* This bit must be '1' for the src_macaddr field to be configured. */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_MACADDR \
UINT32_C(0x8)
/* This bit must be '1' for the ipaddr_type field to be configured. */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_IPADDR_TYPE \
UINT32_C(0x10)
/* This bit must be '1' for the src_ipaddr field to be configured. */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_IPADDR \
UINT32_C(0x20)
/*
* This bit must be '1' for the src_ipaddr_mask field to be
* configured.
*/
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_IPADDR_MASK \
UINT32_C(0x40)
/* This bit must be '1' for the dst_ipaddr field to be configured. */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_IPADDR \
UINT32_C(0x80)
/*
* This bit must be '1' for the dst_ipaddr_mask field to be
* configured.
*/
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_IPADDR_MASK \
UINT32_C(0x100)
/* This bit must be '1' for the ip_protocol field to be configured. */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_IP_PROTOCOL \
UINT32_C(0x200)
/* This bit must be '1' for the src_port field to be configured. */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_PORT \
UINT32_C(0x400)
/*
* This bit must be '1' for the src_port_mask field to be
* configured.
*/
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_PORT_MASK \
UINT32_C(0x800)
/* This bit must be '1' for the dst_port field to be configured. */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_PORT \
UINT32_C(0x1000)
/*
* This bit must be '1' for the dst_port_mask field to be
* configured.
*/
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_PORT_MASK \
UINT32_C(0x2000)
/* This bit must be '1' for the pri_hint field to be configured. */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_PRI_HINT \
UINT32_C(0x4000)
/*
* This bit must be '1' for the ntuple_filter_id field to be
* configured.
*/
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_NTUPLE_FILTER_ID \
UINT32_C(0x8000)
/* This bit must be '1' for the dst_id field to be configured. */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_ID \
UINT32_C(0x10000)
/*
* This bit must be '1' for the mirror_vnic_id field to be
* configured.
*/
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \
UINT32_C(0x20000)
/* This bit must be '1' for the dst_macaddr field to be configured. */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_MACADDR \
UINT32_C(0x40000)
uint64_t l2_filter_id;
/*
* This value identifies a set of CFA data structures used for
* an L2 context.
*/
uint8_t src_macaddr[6];
/*
* This value indicates the source MAC address in the Ethernet
* header.
*/
uint16_t ethertype;
/* This value indicates the ethertype in the Ethernet header. */
uint8_t ip_addr_type;
/*
* This value indicates the type of IP address. 4 - IPv4 6 -
* IPv6 All others are invalid.
*/
/* invalid */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_UNKNOWN \
UINT32_C(0x0)
/* IPv4 */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV4 \
UINT32_C(0x4)
/* IPv6 */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 \
UINT32_C(0x6)
uint8_t ip_protocol;
/*
* The value of protocol filed in IP header. Applies to UDP and
* TCP traffic. 6 - TCP 17 - UDP
*/
/* invalid */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_UNKNOWN \
UINT32_C(0x0)
/* TCP */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_TCP \
UINT32_C(0x6)
/* UDP */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP \
UINT32_C(0x11)
uint16_t dst_id;
/*
* If set, this value shall represent the Logical VNIC ID of the
* destination VNIC for the RX path and network port id of the
* destination port for the TX path.
*/
uint16_t mirror_vnic_id;
/* Logical VNIC ID of the VNIC where traffic is mirrored. */
uint8_t tunnel_type;
/*
* This value indicates the tunnel type for this filter. If this
* field is not specified, then the filter shall apply to both
* non-tunneled and tunneled packets. If this field conflicts
* with the tunnel_type specified in the l2_filter_id, then the
* HWRM shall return an error for this command.
*/
/* Non-tunnel */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
UINT32_C(0x0)
/* Virtual eXtensible Local Area Network (VXLAN) */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
UINT32_C(0x1)
/*
* Network Virtualization Generic Routing
* Encapsulation (NVGRE)
*/
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
UINT32_C(0x2)
/*
* Generic Routing Encapsulation (GRE) inside
* Ethernet payload
*/
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \
UINT32_C(0x3)
/* IP in IP */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \
UINT32_C(0x4)
/* Generic Network Virtualization Encapsulation (Geneve) */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
UINT32_C(0x5)
/* Multi-Protocol Lable Switching (MPLS) */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \
UINT32_C(0x6)
/* Stateless Transport Tunnel (STT) */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT UINT32_C(0x7)
/*
* Generic Routing Encapsulation (GRE) inside IP
* datagram payload
*/
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \
UINT32_C(0x8)
/* Any tunneled traffic */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
UINT32_C(0xff)
uint8_t pri_hint;
/*
* This hint is provided to help in placing the filter in the
* filter table.
*/
/* No preference */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_NO_PREFER \
UINT32_C(0x0)
/* Above the given filter */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_ABOVE UINT32_C(0x1)
/* Below the given filter */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_BELOW UINT32_C(0x2)
/* As high as possible */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_HIGHEST \
UINT32_C(0x3)
/* As low as possible */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_LOWEST UINT32_C(0x4)
uint32_t src_ipaddr[4];
/*
* The value of source IP address to be used in filtering. For
* IPv4, first four bytes represent the IP address.
*/
uint32_t src_ipaddr_mask[4];
/*
* The value of source IP address mask to be used in filtering.
* For IPv4, first four bytes represent the IP address mask.
*/
uint32_t dst_ipaddr[4];
/*
* The value of destination IP address to be used in filtering.
* For IPv4, first four bytes represent the IP address.
*/
uint32_t dst_ipaddr_mask[4];
/*
* The value of destination IP address mask to be used in
* filtering. For IPv4, first four bytes represent the IP
* address mask.
*/
uint16_t src_port;
/*
* The value of source port to be used in filtering. Applies to
* UDP and TCP traffic.
*/
uint16_t src_port_mask;
/*
* The value of source port mask to be used in filtering.
* Applies to UDP and TCP traffic.
*/
uint16_t dst_port;
/*
* The value of destination port to be used in filtering.
* Applies to UDP and TCP traffic.
*/
uint16_t dst_port_mask;
/*
* The value of destination port mask to be used in filtering.
* Applies to UDP and TCP traffic.
*/
uint64_t ntuple_filter_id_hint;
/* This is the ID of the filter that goes along with the pri_hint. */
} __attribute__((packed));
/* Output (24 bytes) */
struct hwrm_cfa_ntuple_filter_alloc_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint64_t ntuple_filter_id;
/* This value is an opaque id into CFA data structures. */
uint32_t flow_id;
/*
* This is the ID of the flow associated with this filter. This
* value shall be used to match and associate the flow
* identifier returned in completion records. A value of
* 0xFFFFFFFF shall indicate no flow id.
*/
uint8_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* Command specific Error Codes (8 bytes) */
struct hwrm_cfa_ntuple_filter_alloc_cmd_err {
uint8_t code;
/*
* command specific error codes that goes to the cmd_err field
* in Common HWRM Error Response.
*/
/* Unknown error */
#define HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0)
/*
* Unable to complete operation due to conflict
* with Rx Mask VLAN
*/
#define \
HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_RX_MASK_VLAN_CONFLICT_ERR \
UINT32_C(0x1)
uint8_t unused_0[7];
} __attribute__((packed));
/* hwrm_cfa_ntuple_filter_free */
/* Description: Free an ntuple filter */
/* Input (24 bytes) */
struct hwrm_cfa_ntuple_filter_free_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint64_t ntuple_filter_id;
/* This value is an opaque id into CFA data structures. */
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_cfa_ntuple_filter_free_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_cfa_ntuple_filter_cfg */
/*
* Description: Configure an ntuple filter with a new destination VNIC and/or
* meter.
*/
/* Input (48 bytes) */
struct hwrm_cfa_ntuple_filter_cfg_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint32_t enables;
/* This bit must be '1' for the new_dst_id field to be configured. */
#define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_DST_ID \
UINT32_C(0x1)
/*
* This bit must be '1' for the new_mirror_vnic_id field to be
* configured.
*/
#define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID \
UINT32_C(0x2)
/*
* This bit must be '1' for the new_meter_instance_id field to
* be configured.
*/
#define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_METER_INSTANCE_ID \
UINT32_C(0x4)
uint32_t unused_0;
uint64_t ntuple_filter_id;
/* This value is an opaque id into CFA data structures. */
uint32_t new_dst_id;
/*
* If set, this value shall represent the new Logical VNIC ID of
* the destination VNIC for the RX path and new network port id
* of the destination port for the TX path.
*/
uint32_t new_mirror_vnic_id;
/* New Logical VNIC ID of the VNIC where traffic is mirrored. */
uint16_t new_meter_instance_id;
/*
* New meter to attach to the flow. Specifying the invalid
* instance ID is used to remove any existing meter from the
* flow.
*/
/*
* A value of 0xfff is considered invalid and
* implies the instance is not configured.
*/
#define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_NEW_METER_INSTANCE_ID_INVALID \
UINT32_C(0xffff)
uint16_t unused_1[3];
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_cfa_ntuple_filter_cfg_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_cfa_em_flow_alloc */
/*
* Description: This is a generic Exact Match (EM) flow that uses fields from
* L4/L3/L2 headers. The EM flows apply to transmit and receive traffic. All
* L2/L3/L4 header fields are specified in network byte order. For each EM flow,
* there is an associated set of actions specified. For tunneled packets, all
* L2/L3/L4 fields specified are fields of inner headers unless otherwise
* specified. # If a field specified in this command is not enabled as a valid
* field, then that field shall not be used in matching packet header fields
* against this EM flow entry.
*/
/* Input (112 bytes) */
struct hwrm_cfa_em_flow_alloc_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint32_t flags;
/*
* Enumeration denoting the RX, TX type of the resource. This
* enumeration is used for resources that are similar for both
* TX and RX paths of the chip.
*/
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH UINT32_C(0x1)
/* tx path */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_TX \
(UINT32_C(0x0) << 0)
/* rx path */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_RX \
(UINT32_C(0x1) << 0)
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_LAST \
CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_RX
/*
* Setting of this flag indicates enabling of a byte counter for
* a given flow.
*/
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_BYTE_CTR UINT32_C(0x2)
/*
* Setting of this flag indicates enabling of a packet counter
* for a given flow.
*/
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PKT_CTR UINT32_C(0x4)
/*
* Setting of this flag indicates de-capsulation action for the
* given flow.
*/
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_DECAP UINT32_C(0x8)
/*
* Setting of this flag indicates encapsulation action for the
* given flow.
*/
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_ENCAP UINT32_C(0x10)
/*
* Setting of this flag indicates drop action. If this flag is
* not set, then it should be considered accept action.
*/
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_DROP UINT32_C(0x20)
/*
* Setting of this flag indicates that a meter is expected to be
* attached to this flow. This hint can be used when choosing
* the action record format required for the flow.
*/
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_METER UINT32_C(0x40)
uint32_t enables;
/* This bit must be '1' for the l2_filter_id field to be configured. */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_L2_FILTER_ID UINT32_C(0x1)
/* This bit must be '1' for the tunnel_type field to be configured. */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_TUNNEL_TYPE UINT32_C(0x2)
/* This bit must be '1' for the tunnel_id field to be configured. */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_TUNNEL_ID UINT32_C(0x4)
/* This bit must be '1' for the src_macaddr field to be configured. */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_SRC_MACADDR UINT32_C(0x8)
/* This bit must be '1' for the dst_macaddr field to be configured. */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_MACADDR UINT32_C(0x10)
/* This bit must be '1' for the ovlan_vid field to be configured. */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_OVLAN_VID UINT32_C(0x20)
/* This bit must be '1' for the ivlan_vid field to be configured. */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_IVLAN_VID UINT32_C(0x40)
/* This bit must be '1' for the ethertype field to be configured. */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_ETHERTYPE UINT32_C(0x80)
/* This bit must be '1' for the src_ipaddr field to be configured. */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_SRC_IPADDR UINT32_C(0x100)
/* This bit must be '1' for the dst_ipaddr field to be configured. */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_IPADDR UINT32_C(0x200)
/* This bit must be '1' for the ipaddr_type field to be configured. */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_IPADDR_TYPE UINT32_C(0x400)
/* This bit must be '1' for the ip_protocol field to be configured. */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_IP_PROTOCOL UINT32_C(0x800)
/* This bit must be '1' for the src_port field to be configured. */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_SRC_PORT UINT32_C(0x1000)
/* This bit must be '1' for the dst_port field to be configured. */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_PORT UINT32_C(0x2000)
/* This bit must be '1' for the dst_id field to be configured. */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_ID UINT32_C(0x4000)
/*
* This bit must be '1' for the mirror_vnic_id field to be
* configured.
*/
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \
UINT32_C(0x8000)
/*
* This bit must be '1' for the encap_record_id field to be
* configured.
*/
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_ENCAP_RECORD_ID \
UINT32_C(0x10000)
/*
* This bit must be '1' for the meter_instance_id field to be
* configured.
*/
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_METER_INSTANCE_ID \
UINT32_C(0x20000)
uint64_t l2_filter_id;
/*
* This value identifies a set of CFA data structures used for
* an L2 context.
*/
uint8_t tunnel_type;
/* Tunnel Type. */
/* Non-tunnel */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
UINT32_C(0x0)
/* Virtual eXtensible Local Area Network (VXLAN) */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN UINT32_C(0x1)
/*
* Network Virtualization Generic Routing
* Encapsulation (NVGRE)
*/
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_NVGRE UINT32_C(0x2)
/*
* Generic Routing Encapsulation (GRE) inside
* Ethernet payload
*/
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_L2GRE UINT32_C(0x3)
/* IP in IP */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPIP UINT32_C(0x4)
/* Generic Network Virtualization Encapsulation (Geneve) */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_GENEVE UINT32_C(0x5)
/* Multi-Protocol Lable Switching (MPLS) */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_MPLS UINT32_C(0x6)
/* Stateless Transport Tunnel (STT) */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_STT UINT32_C(0x7)
/*
* Generic Routing Encapsulation (GRE) inside IP
* datagram payload
*/
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPGRE UINT32_C(0x8)
/*
* IPV4 over virtual eXtensible Local Area
* Network (IPV4oVXLAN)
*/
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 UINT32_C(0x9)
/* Any tunneled traffic */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
UINT32_C(0xff)
uint8_t unused_0;
uint16_t unused_1;
uint32_t tunnel_id;
/*
* Tunnel identifier. Virtual Network Identifier (VNI). Only
* valid with tunnel_types VXLAN, NVGRE, and Geneve. Only lower
* 24-bits of VNI field are used in setting up the filter.
*/
uint8_t src_macaddr[6];
/*
* This value indicates the source MAC address in the Ethernet
* header.
*/
uint16_t meter_instance_id;
/* The meter instance to attach to the flow. */
/*
* A value of 0xfff is considered invalid and
* implies the instance is not configured.
*/
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_METER_INSTANCE_ID_INVALID \
UINT32_C(0xffff)
uint8_t dst_macaddr[6];
/*
* This value indicates the destination MAC address in the
* Ethernet header.
*/
uint16_t ovlan_vid;
/*
* This value indicates the VLAN ID of the outer VLAN tag in the
* Ethernet header.
*/
uint16_t ivlan_vid;
/*
* This value indicates the VLAN ID of the inner VLAN tag in the
* Ethernet header.
*/
uint16_t ethertype;
/* This value indicates the ethertype in the Ethernet header. */
uint8_t ip_addr_type;
/*
* This value indicates the type of IP address. 4 - IPv4 6 -
* IPv6 All others are invalid.
*/
/* invalid */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_UNKNOWN UINT32_C(0x0)
/* IPv4 */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_IPV4 UINT32_C(0x4)
/* IPv6 */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 UINT32_C(0x6)
uint8_t ip_protocol;
/*
* The value of protocol filed in IP header. Applies to UDP and
* TCP traffic. 6 - TCP 17 - UDP
*/
/* invalid */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_UNKNOWN UINT32_C(0x0)
/* TCP */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_TCP UINT32_C(0x6)
/* UDP */
#define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_UDP UINT32_C(0x11)
uint8_t unused_2;
uint8_t unused_3;
uint32_t src_ipaddr[4];
/*
* The value of source IP address to be used in filtering. For
* IPv4, first four bytes represent the IP address.
*/
uint32_t dst_ipaddr[4];
/*
* big_endian = True The value of destination IP address to be
* used in filtering. For IPv4, first four bytes represent the
* IP address.
*/
uint16_t src_port;
/*
* The value of source port to be used in filtering. Applies to
* UDP and TCP traffic.
*/
uint16_t dst_port;
/*
* The value of destination port to be used in filtering.
* Applies to UDP and TCP traffic.
*/
uint16_t dst_id;
/*
* If set, this value shall represent the Logical VNIC ID of the
* destination VNIC for the RX path and network port id of the
* destination port for the TX path.
*/
uint16_t mirror_vnic_id;
/* Logical VNIC ID of the VNIC where traffic is mirrored. */
uint32_t encap_record_id;
/* Logical ID of the encapsulation record. */
uint32_t unused_4;
} __attribute__((packed));
/* Output (24 bytes) */
struct hwrm_cfa_em_flow_alloc_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint64_t em_filter_id;
/* This value is an opaque id into CFA data structures. */
uint32_t flow_id;
/*
* This is the ID of the flow associated with this filter. This
* value shall be used to match and associate the flow
* identifier returned in completion records. A value of
* 0xFFFFFFFF shall indicate no flow id.
*/
uint8_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_cfa_em_flow_free */
/* Description: Free an EM flow table entry */
/* Input (24 bytes) */
struct hwrm_cfa_em_flow_free_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint64_t em_filter_id;
/* This value is an opaque id into CFA data structures. */
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_cfa_em_flow_free_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_cfa_em_flow_cfg */
/*
* Description: Configure an EM flow with a new destination VNIC and/or meter.
*/
/* Input (48 bytes) */
struct hwrm_cfa_em_flow_cfg_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint32_t enables;
/* This bit must be '1' for the new_dst_id field to be configured. */
#define HWRM_CFA_EM_FLOW_CFG_INPUT_ENABLES_NEW_DST_ID UINT32_C(0x1)
/*
* This bit must be '1' for the new_mirror_vnic_id field to be
* configured.
*/
#define HWRM_CFA_EM_FLOW_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID \
UINT32_C(0x2)
/*
* This bit must be '1' for the new_meter_instance_id field to
* be configured.
*/
#define HWRM_CFA_EM_FLOW_CFG_INPUT_ENABLES_NEW_METER_INSTANCE_ID \
UINT32_C(0x4)
uint32_t unused_0;
uint64_t em_filter_id;
/* This value is an opaque id into CFA data structures. */
uint32_t new_dst_id;
/*
* If set, this value shall represent the new Logical VNIC ID of
* the destination VNIC for the RX path and network port id of
* the destination port for the TX path.
*/
uint32_t new_mirror_vnic_id;
/* New Logical VNIC ID of the VNIC where traffic is mirrored. */
uint16_t new_meter_instance_id;
/*
* New meter to attach to the flow. Specifying the invalid
* instance ID is used to remove any existing meter from the
* flow.
*/
/*
* A value of 0xfff is considered invalid and
* implies the instance is not configured.
*/
#define HWRM_CFA_EM_FLOW_CFG_INPUT_NEW_METER_INSTANCE_ID_INVALID \
UINT32_C(0xffff)
uint16_t unused_1[3];
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_cfa_em_flow_cfg_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_tunnel_dst_port_query */
/*
* Description: This function is called by a driver to query tunnel type
* specific destination port configuration.
*/
/* Input (24 bytes) */
struct hwrm_tunnel_dst_port_query_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint8_t tunnel_type;
/* Tunnel Type. */
/* Virtual eXtensible Local Area Network (VXLAN) */
#define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_VXLAN \
UINT32_C(0x1)
/* Generic Network Virtualization Encapsulation (Geneve) */
#define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_GENEVE \
UINT32_C(0x5)
/*
* IPV4 over virtual eXtensible Local Area
* Network (IPV4oVXLAN)
*/
#define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_VXLAN_V4 \
UINT32_C(0x9)
uint8_t unused_0[7];
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_tunnel_dst_port_query_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint16_t tunnel_dst_port_id;
/*
* This field represents the identifier of L4 destination port
* used for the given tunnel type. This field is valid for
* specific tunnel types that use layer 4 (e.g. UDP) transports
* for tunneling.
*/
uint16_t tunnel_dst_port_val;
/*
* This field represents the value of L4 destination port
* identified by tunnel_dst_port_id. This field is valid for
* specific tunnel types that use layer 4 (e.g. UDP) transports
* for tunneling. This field is in network byte order. A value
* of 0 means that the destination port is not configured.
*/
uint8_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_tunnel_dst_port_alloc */
/*
* Description: This function is called by a driver to allocate l4 destination
* port for a specific tunnel type. The destination port value is provided in
* the input. If the HWRM supports only one global destination port for a tunnel
* type, then the HWRM shall keep track of its usage as described below. # The
* first caller that allocates a destination port shall always succeed and the
* HWRM shall save the destination port configuration for that tunnel type and
* increment the usage count to 1. # Subsequent callers allocating the same
* destination port for that tunnel type shall succeed and the HWRM shall
* increment the usage count for that port for each subsequent caller that
* succeeds. # Any subsequent caller trying to allocate a different destination
* port for that tunnel type shall fail until the usage count for the original
* destination port goes to zero. # A caller that frees a port will cause the
* usage count for that port to decrement.
*/
/* Input (24 bytes) */
struct hwrm_tunnel_dst_port_alloc_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint8_t tunnel_type;
/* Tunnel Type. */
/* Virtual eXtensible Local Area Network (VXLAN) */
#define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_VXLAN UINT32_C(0x1)
/* Generic Network Virtualization Encapsulation (Geneve) */
#define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
UINT32_C(0x5)
/*
* IPV4 over virtual eXtensible Local Area
* Network (IPV4oVXLAN)
*/
#define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
UINT32_C(0x9)
uint8_t unused_0;
uint16_t tunnel_dst_port_val;
/*
* This field represents the value of L4 destination port used
* for the given tunnel type. This field is valid for specific
* tunnel types that use layer 4 (e.g. UDP) transports for
* tunneling. This field is in network byte order. A value of 0
* shall fail the command.
*/
uint32_t unused_1;
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_tunnel_dst_port_alloc_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint16_t tunnel_dst_port_id;
/*
* Identifier of a tunnel L4 destination port value. Only
* applies to tunnel types that has l4 destination port
* parameters.
*/
uint8_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t unused_4;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_tunnel_dst_port_free */
/*
* Description: This function is called by a driver to free l4 destination port
* for a specific tunnel type.
*/
/* Input (24 bytes) */
struct hwrm_tunnel_dst_port_free_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint8_t tunnel_type;
/* Tunnel Type. */
/* Virtual eXtensible Local Area Network (VXLAN) */
#define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_VXLAN UINT32_C(0x1)
/* Generic Network Virtualization Encapsulation (Geneve) */
#define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_GENEVE UINT32_C(0x5)
/*
* IPV4 over virtual eXtensible Local Area
* Network (IPV4oVXLAN)
*/
#define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_VXLAN_V4 \
UINT32_C(0x9)
uint8_t unused_0;
uint16_t tunnel_dst_port_id;
/*
* Identifier of a tunnel L4 destination port value. Only
* applies to tunnel types that has l4 destination port
* parameters.
*/
uint32_t unused_1;
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_tunnel_dst_port_free_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_stat_ctx_alloc */
/*
* Description: This command allocates and does basic preparation for a stat
* context.
*/
/* Input (32 bytes) */
struct hwrm_stat_ctx_alloc_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint64_t stats_dma_addr;
/* This is the address for statistic block. */
uint32_t update_period_ms;
/*
* The statistic block update period in ms. e.g. 250ms, 500ms,
* 750ms, 1000ms. If update_period_ms is 0, then the stats
* update shall be never done and the DMA address shall not be
* used. In this case, the stat block can only be read by
* hwrm_stat_ctx_query command.
*/
uint8_t stat_ctx_flags;
/*
* This field is used to specify statistics context specific
* configuration flags.
*/
/*
* When this bit is set to '1', the statistics context shall be
* allocated for RoCE traffic only. In this case, traffic other
* than offloaded RoCE traffic shall not be included in this
* statistic context. When this bit is set to '0', the
* statistics context shall be used for the network traffic
* other than offloaded RoCE traffic.
*/
#define HWRM_STAT_CTX_ALLOC_INPUT_STAT_CTX_FLAGS_ROCE UINT32_C(0x1)
uint8_t unused_0[3];
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_stat_ctx_alloc_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t stat_ctx_id;
/* This is the statistics context ID value. */
uint8_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_stat_ctx_free */
/* Description: This command is used to free a stat context. */
/* Input (24 bytes) */
struct hwrm_stat_ctx_free_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint32_t stat_ctx_id;
/* ID of the statistics context that is being queried. */
uint32_t unused_0;
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_stat_ctx_free_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t stat_ctx_id;
/* This is the statistics context ID value. */
uint8_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_stat_ctx_query */
/* Description: This command returns statistics of a context. */
/* Input (24 bytes) */
struct hwrm_stat_ctx_query_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format for the
* rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request will be
* optionally completed on. If the value is -1, then no CR completion
* will be generated. Any other value must be a valid CR ring_id value
* for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
* 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written when the
* request is complete. This area must be 16B aligned and must be
* cleared to zero before the request is made.
*/
uint32_t stat_ctx_id;
/* ID of the statistics context that is being queried. */
uint32_t unused_0;
} __attribute__((packed));
/* Output (176 bytes) */
struct hwrm_stat_ctx_query_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in parameters,
* and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last byte of
* the response is a valid flag that will read as '1' when the command
* has been completely written to memory.
*/
uint64_t tx_ucast_pkts;
/* Number of transmitted unicast packets */
uint64_t tx_mcast_pkts;
/* Number of transmitted multicast packets */
uint64_t tx_bcast_pkts;
/* Number of transmitted broadcast packets */
uint64_t tx_err_pkts;
/* Number of transmitted packets with error */
uint64_t tx_drop_pkts;
/* Number of dropped packets on transmit path */
uint64_t tx_ucast_bytes;
/* Number of transmitted bytes for unicast traffic */
uint64_t tx_mcast_bytes;
/* Number of transmitted bytes for multicast traffic */
uint64_t tx_bcast_bytes;
/* Number of transmitted bytes for broadcast traffic */
uint64_t rx_ucast_pkts;
/* Number of received unicast packets */
uint64_t rx_mcast_pkts;
/* Number of received multicast packets */
uint64_t rx_bcast_pkts;
/* Number of received broadcast packets */
uint64_t rx_err_pkts;
/* Number of received packets with error */
uint64_t rx_drop_pkts;
/* Number of dropped packets on received path */
uint64_t rx_ucast_bytes;
/* Number of received bytes for unicast traffic */
uint64_t rx_mcast_bytes;
/* Number of received bytes for multicast traffic */
uint64_t rx_bcast_bytes;
/* Number of received bytes for broadcast traffic */
uint64_t rx_agg_pkts;
/* Number of aggregated unicast packets */
uint64_t rx_agg_bytes;
/* Number of aggregated unicast bytes */
uint64_t rx_agg_events;
/* Number of aggregation events */
uint64_t rx_agg_aborts;
/* Number of aborted aggregations */
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the output is
* completely written to RAM. This field should be read as '1' to
* indicate that the output has been completely written. When writing a
* command completion or response to an internal processor, the order of
* writes has to be such that this field is written last.
*/
} __attribute__((packed));
/* hwrm_stat_ctx_clr_stats */
/* Description: This command clears statistics of a context. */
/* Input (24 bytes) */
struct hwrm_stat_ctx_clr_stats_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint32_t stat_ctx_id;
/* ID of the statistics context that is being queried. */
uint32_t unused_0;
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_stat_ctx_clr_stats_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_exec_fwd_resp */
/*
* Description: This command is used to send an encapsulated request to the
* HWRM. This command instructs the HWRM to execute the request and forward the
* response of the encapsulated request to the location specified in the
* original request that is encapsulated. The target id of this command shall be
* set to 0xFFFF (HWRM). The response location in this command shall be used to
* acknowledge the receipt of the encapsulated request and forwarding of the
* response.
*/
/* Input (128 bytes) */
struct hwrm_exec_fwd_resp_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint32_t encap_request[26];
/*
* This is an encapsulated request. This request should be
* executed by the HWRM and the response should be provided in
* the response buffer inside the encapsulated request.
*/
uint16_t encap_resp_target_id;
/*
* This value indicates the target id of the response to the
* encapsulated request. 0x0 - 0xFFF8 - Used for function ids
* 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF -
* HWRM
*/
uint16_t unused_0[3];
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_exec_fwd_resp_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_reject_fwd_resp */
/*
* Description: This command is used to send an encapsulated request to the
* HWRM. This command instructs the HWRM to reject the request and forward the
* error response of the encapsulated request to the location specified in the
* original request that is encapsulated. The target id of this command shall be
* set to 0xFFFF (HWRM). The response location in this command shall be used to
* acknowledge the receipt of the encapsulated request and forwarding of the
* response.
*/
/* Input (128 bytes) */
struct hwrm_reject_fwd_resp_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint32_t encap_request[26];
/*
* This is an encapsulated request. This request should be
* rejected by the HWRM and the error response should be
* provided in the response buffer inside the encapsulated
* request.
*/
uint16_t encap_resp_target_id;
/*
* This value indicates the target id of the response to the
* encapsulated request. 0x0 - 0xFFF8 - Used for function ids
* 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF -
* HWRM
*/
uint16_t unused_0[3];
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_reject_fwd_resp_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_nvm_get_dir_entries */
/* Input (24 bytes) */
struct hwrm_nvm_get_dir_entries_input {
uint16_t req_type;
uint16_t cmpl_ring;
uint16_t seq_id;
uint16_t target_id;
uint64_t resp_addr;
uint64_t host_dest_addr;
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_nvm_get_dir_entries_output {
uint16_t error_code;
uint16_t req_type;
uint16_t seq_id;
uint16_t resp_len;
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
} __attribute__((packed));
/* hwrm_nvm_erase_dir_entry */
/* Input (24 bytes) */
struct hwrm_nvm_erase_dir_entry_input {
uint16_t req_type;
uint16_t cmpl_ring;
uint16_t seq_id;
uint16_t target_id;
uint64_t resp_addr;
uint16_t dir_idx;
uint16_t unused_0[3];
};
/* Output (16 bytes) */
struct hwrm_nvm_erase_dir_entry_output {
uint16_t error_code;
uint16_t req_type;
uint16_t seq_id;
uint16_t resp_len;
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
};
/* hwrm_nvm_get_dir_info */
/* Input (16 bytes) */
struct hwrm_nvm_get_dir_info_input {
uint16_t req_type;
uint16_t cmpl_ring;
uint16_t seq_id;
uint16_t target_id;
uint64_t resp_addr;
} __attribute__((packed));
/* Output (24 bytes) */
struct hwrm_nvm_get_dir_info_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t entries;
/* Number of directory entries in the directory. */
uint32_t entry_length;
/* Size of each directory entry, in bytes. */
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_nvm_write */
/*
* Note: Write to the allocated NVRAM of an item referenced by an existing
* directory entry.
*/
/* Input (48 bytes) */
struct hwrm_nvm_write_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint64_t host_src_addr;
/* 64-bit Host Source Address. This is where the source data is. */
uint16_t dir_type;
/*
* The Directory Entry Type (valid values are defined in the
* bnxnvm_directory_type enum defined in the file
* bnxnvm_defs.h).
*/
uint16_t dir_ordinal;
/*
* Directory ordinal. The 0-based instance of the combined
* Directory Entry Type and Extension.
*/
uint16_t dir_ext;
/*
* The Directory Entry Extension flags (see BNX_DIR_EXT_* in the
* file bnxnvm_defs.h).
*/
uint16_t dir_attr;
/*
* Directory Entry Attribute flags (see BNX_DIR_ATTR_* in the
* file bnxnvm_defs.h).
*/
uint32_t dir_data_length;
/*
* Length of data to write, in bytes. May be less than or equal
* to the allocated size for the directory entry. The data
* length stored in the directory entry will be updated to
* reflect this value once the write is complete.
*/
uint16_t option;
/* Option. */
uint16_t flags;
/*
* When this bit is '1', the original active image will not be
* removed. TBD: what purpose is this?
*/
#define HWRM_NVM_WRITE_INPUT_FLAGS_KEEP_ORIG_ACTIVE_IMG UINT32_C(0x1)
uint32_t dir_item_length;
/*
* The requested length of the allocated NVM for the item, in
* bytes. This value may be greater than or equal to the
* specified data length (dir_data_length). If this value is
* less than the specified data length, it will be ignored. The
* response will contain the actual allocated item length, which
* may be greater than the requested item length. The purpose
* for allocating more than the required number of bytes for an
* item's data is to pre-allocate extra storage (padding) to
* accommodate the potential future growth of an item (e.g.
* upgraded firmware with a size increase, log growth, expanded
* configuration data).
*/
uint32_t unused_0;
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_nvm_write_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t dir_item_length;
/*
* Length of the allocated NVM for the item, in bytes. The value
* may be greater than or equal to the specified data length or
* the requested item length. The actual item length used when
* creating a new directory entry will be a multiple of an NVM
* block size.
*/
uint16_t dir_idx;
/* The directory index of the created or modified item. */
uint8_t unused_0;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* hwrm_nvm_read */
/*
* Note: Read the contents of an NVRAM item as referenced (indexed) by an
* existing directory entry.
*/
/* Input (40 bytes) */
struct hwrm_nvm_read_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
uint64_t host_dest_addr;
/*
* 64-bit Host Destination Address. This is the host address
* where the data will be written to.
*/
uint16_t dir_idx;
/* The 0-based index of the directory entry. */
uint8_t unused_0;
uint8_t unused_1;
uint32_t offset;
/* The NVRAM byte-offset to read from. */
uint32_t len;
/* The length of the data to be read, in bytes. */
uint32_t unused_2;
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_nvm_read_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* Hardware Resource Manager Specification */
/* Description: This structure is used to specify port description. */
/*
* Note: The Hardware Resource Manager (HWRM) manages various hardware resources
* inside the chip. The HWRM is implemented in firmware, and runs on embedded
* processors inside the chip. This firmware service is vital part of the chip.
* The chip can not be used by a driver or HWRM client without the HWRM.
*/
/* Input (16 bytes) */
struct input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
* This value indicates the what completion ring the request
* will be optionally completed on. If the value is -1, then no
* CR completion will be generated. Any other value must be a
* valid CR ring_id value for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
* Target ID of this command. 0x0 - 0xFFF8 - Used for function
* ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
* - HWRM
*/
uint64_t resp_addr;
/*
* This is the host address where the response will be written
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
} __attribute__((packed));
/* Output (8 bytes) */
struct output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
} __attribute__((packed));
/* Short Command Structure (16 bytes) */
struct hwrm_short_input {
uint16_t req_type;
/*
* This field indicates the type of request in the request
* buffer. The format for the rest of the command (request) is
* determined by this field.
*/
uint16_t signature;
/*
* This field indicates a signature that is used to identify
* short form of the command listed here. This field shall be
* set to 17185 (0x4321).
*/
/* Signature indicating this is a short form of HWRM command */
#define HWRM_SHORT_REQ_SIGNATURE_SHORT_CMD UINT32_C(0x4321)
uint16_t unused_0;
/* Reserved for future use. */
uint16_t size;
/* This value indicates the length of the request. */
uint64_t req_addr;
/*
* This is the host address where the request was written. This
* area must be 16B aligned.
*/
} __attribute__((packed));
#define HWRM_GET_HWRM_ERROR_CODE(arg) \
{ \
typeof(arg) x = (arg); \
((x) == 0xf ? "HWRM_ERROR" : \
((x) == 0xffff ? "CMD_NOT_SUPPORTED" : \
((x) == 0xfffe ? "UNKNOWN_ERR" : \
((x) == 0x4 ? "RESOURCE_ALLOC_ERROR" : \
((x) == 0x5 ? "INVALID_FLAGS" : \
((x) == 0x6 ? "INVALID_ENABLES" : \
((x) == 0x0 ? "SUCCESS" : \
((x) == 0x1 ? "FAIL" : \
((x) == 0x2 ? "INVALID_PARAMS" : \
((x) == 0x3 ? "RESOURCE_ACCESS_DENIED" : \
"Unknown error_code")))))))))) \
}
/* Return Codes (8 bytes) */
struct ret_codes {
uint16_t error_code;
/* These are numbers assigned to return/error codes. */
/* Request was successfully executed by the HWRM. */
#define HWRM_ERR_CODE_SUCCESS (UINT32_C(0x0))
/* THe HWRM failed to execute the request. */
#define HWRM_ERR_CODE_FAIL (UINT32_C(0x1))
/*
* The request contains invalid argument(s) or
* input parameters.
*/
#define HWRM_ERR_CODE_INVALID_PARAMS (UINT32_C(0x2))
/*
* The requester is not allowed to access the
* requested resource. This error code shall be
* provided in a response to a request to query
* or modify an existing resource that is not
* accessible by the requester.
*/
#define HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED (UINT32_C(0x3))
/*
* The HWRM is unable to allocate the requested
* resource. This code only applies to requests
* for HWRM resource allocations.
*/
#define HWRM_ERR_CODE_RESOURCE_ALLOC_ERROR (UINT32_C(0x4))
/* Invalid combination of flags is specified in the request. */
#define HWRM_ERR_CODE_INVALID_FLAGS (UINT32_C(0x5))
/*
* Invalid combination of enables fields is
* specified in the request.
*/
#define HWRM_ERR_CODE_INVALID_ENABLES (UINT32_C(0x6))
/*
* Generic HWRM execution error that represents
* an internal error.
*/
#define HWRM_ERR_CODE_HWRM_ERROR (UINT32_C(0xf))
/* Unknown error */
#define HWRM_ERR_CODE_UNKNOWN_ERR (UINT32_C(0xfffe))
/* Unsupported or invalid command */
#define HWRM_ERR_CODE_CMD_NOT_SUPPORTED (UINT32_C(0xffff))
uint16_t unused_0[3];
} __attribute__((packed));
/* Output (16 bytes) */
struct hwrm_err_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* parameters, and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
uint16_t seq_id;
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
* This field is the length of the response in bytes. The last
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
uint32_t opaque_0;
/* debug info for this error response. */
uint16_t opaque_1;
/* debug info for this error response. */
uint8_t cmd_err;
/*
* In the case of an error response, command specific error code
* is returned in this field.
*/
uint8_t valid;
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
* read as '1' to indicate that the output has been completely
* written. When writing a command completion or response to an
* internal processor, the order of writes has to be such that
* this field is written last.
*/
} __attribute__((packed));
/* Port Tx Statistics Formats (408 bytes) */
struct tx_port_stats {
uint64_t tx_64b_frames;
/* Total Number of 64 Bytes frames transmitted */
uint64_t tx_65b_127b_frames;
/* Total Number of 65-127 Bytes frames transmitted */
uint64_t tx_128b_255b_frames;
/* Total Number of 128-255 Bytes frames transmitted */
uint64_t tx_256b_511b_frames;
/* Total Number of 256-511 Bytes frames transmitted */
uint64_t tx_512b_1023b_frames;
/* Total Number of 512-1023 Bytes frames transmitted */
uint64_t tx_1024b_1518_frames;
/* Total Number of 1024-1518 Bytes frames transmitted */
uint64_t tx_good_vlan_frames;
/*
* Total Number of each good VLAN (exludes FCS errors) frame
* transmitted which is 1519 to 1522 bytes in length inclusive
* (excluding framing bits but including FCS bytes).
*/
uint64_t tx_1519b_2047_frames;
/* Total Number of 1519-2047 Bytes frames transmitted */
uint64_t tx_2048b_4095b_frames;
/* Total Number of 2048-4095 Bytes frames transmitted */
uint64_t tx_4096b_9216b_frames;
/* Total Number of 4096-9216 Bytes frames transmitted */
uint64_t tx_9217b_16383b_frames;
/* Total Number of 9217-16383 Bytes frames transmitted */
uint64_t tx_good_frames;
/* Total Number of good frames transmitted */
uint64_t tx_total_frames;
/* Total Number of frames transmitted */
uint64_t tx_ucast_frames;
/* Total number of unicast frames transmitted */
uint64_t tx_mcast_frames;
/* Total number of multicast frames transmitted */
uint64_t tx_bcast_frames;
/* Total number of broadcast frames transmitted */
uint64_t tx_pause_frames;
/* Total number of PAUSE control frames transmitted */
uint64_t tx_pfc_frames;
/* Total number of PFC/per-priority PAUSE control frames transmitted */
uint64_t tx_jabber_frames;
/* Total number of jabber frames transmitted */
uint64_t tx_fcs_err_frames;
/* Total number of frames transmitted with FCS error */
uint64_t tx_control_frames;
/* Total number of control frames transmitted */
uint64_t tx_oversz_frames;
/* Total number of over-sized frames transmitted */
uint64_t tx_single_dfrl_frames;
/* Total number of frames with single deferral */
uint64_t tx_multi_dfrl_frames;
/* Total number of frames with multiple deferrals */
uint64_t tx_single_coll_frames;
/* Total number of frames with single collision */
uint64_t tx_multi_coll_frames;
/* Total number of frames with multiple collisions */
uint64_t tx_late_coll_frames;
/* Total number of frames with late collisions */
uint64_t tx_excessive_coll_frames;
/* Total number of frames with excessive collisions */
uint64_t tx_frag_frames;
/* Total number of fragmented frames transmitted */
uint64_t tx_err;
/* Total number of transmit errors */
uint64_t tx_tagged_frames;
/* Total number of single VLAN tagged frames transmitted */
uint64_t tx_dbl_tagged_frames;
/* Total number of double VLAN tagged frames transmitted */
uint64_t tx_runt_frames;
/* Total number of runt frames transmitted */
uint64_t tx_fifo_underruns;
/* Total number of TX FIFO under runs */
uint64_t tx_pfc_ena_frames_pri0;
/*
* Total number of PFC frames with PFC enabled bit for Pri 0
* transmitted
*/
uint64_t tx_pfc_ena_frames_pri1;
/*
* Total number of PFC frames with PFC enabled bit for Pri 1
* transmitted
*/
uint64_t tx_pfc_ena_frames_pri2;
/*
* Total number of PFC frames with PFC enabled bit for Pri 2
* transmitted
*/
uint64_t tx_pfc_ena_frames_pri3;
/*
* Total number of PFC frames with PFC enabled bit for Pri 3
* transmitted
*/
uint64_t tx_pfc_ena_frames_pri4;
/*
* Total number of PFC frames with PFC enabled bit for Pri 4
* transmitted
*/
uint64_t tx_pfc_ena_frames_pri5;
/*
* Total number of PFC frames with PFC enabled bit for Pri 5
* transmitted
*/
uint64_t tx_pfc_ena_frames_pri6;
/*
* Total number of PFC frames with PFC enabled bit for Pri 6
* transmitted
*/
uint64_t tx_pfc_ena_frames_pri7;
/*
* Total number of PFC frames with PFC enabled bit for Pri 7
* transmitted
*/
uint64_t tx_eee_lpi_events;
/* Total number of EEE LPI Events on TX */
uint64_t tx_eee_lpi_duration;
/* EEE LPI Duration Counter on TX */
uint64_t tx_llfc_logical_msgs;
/*
* Total number of Link Level Flow Control (LLFC) messages
* transmitted
*/
uint64_t tx_hcfc_msgs;
/* Total number of HCFC messages transmitted */
uint64_t tx_total_collisions;
/* Total number of TX collisions */
uint64_t tx_bytes;
/* Total number of transmitted bytes */
uint64_t tx_xthol_frames;
/* Total number of end-to-end HOL frames */
uint64_t tx_stat_discard;
/* Total Tx Drops per Port reported by STATS block */
uint64_t tx_stat_error;
/* Total Tx Error Drops per Port reported by STATS block */
} __attribute__((packed));
/* Port Rx Statistics Formats (528 bytes) */
struct rx_port_stats {
uint64_t rx_64b_frames;
/* Total Number of 64 Bytes frames received */
uint64_t rx_65b_127b_frames;
/* Total Number of 65-127 Bytes frames received */
uint64_t rx_128b_255b_frames;
/* Total Number of 128-255 Bytes frames received */
uint64_t rx_256b_511b_frames;
/* Total Number of 256-511 Bytes frames received */
uint64_t rx_512b_1023b_frames;
/* Total Number of 512-1023 Bytes frames received */
uint64_t rx_1024b_1518_frames;
/* Total Number of 1024-1518 Bytes frames received */
uint64_t rx_good_vlan_frames;
/*
* Total Number of each good VLAN (exludes FCS errors) frame
* received which is 1519 to 1522 bytes in length inclusive
* (excluding framing bits but including FCS bytes).
*/
uint64_t rx_1519b_2047b_frames;
/* Total Number of 1519-2047 Bytes frames received */
uint64_t rx_2048b_4095b_frames;
/* Total Number of 2048-4095 Bytes frames received */
uint64_t rx_4096b_9216b_frames;
/* Total Number of 4096-9216 Bytes frames received */
uint64_t rx_9217b_16383b_frames;
/* Total Number of 9217-16383 Bytes frames received */
uint64_t rx_total_frames;
/* Total number of frames received */
uint64_t rx_ucast_frames;
/* Total number of unicast frames received */
uint64_t rx_mcast_frames;
/* Total number of multicast frames received */
uint64_t rx_bcast_frames;
/* Total number of broadcast frames received */
uint64_t rx_fcs_err_frames;
/* Total number of received frames with FCS error */
uint64_t rx_ctrl_frames;
/* Total number of control frames received */
uint64_t rx_pause_frames;
/* Total number of PAUSE frames received */
uint64_t rx_pfc_frames;
/* Total number of PFC frames received */
uint64_t rx_unsupported_opcode_frames;
/* Total number of frames received with an unsupported opcode */
uint64_t rx_unsupported_da_pausepfc_frames;
/*
* Total number of frames received with an unsupported DA for
* pause and PFC
*/
uint64_t rx_wrong_sa_frames;
/* Total number of frames received with an unsupported SA */
uint64_t rx_align_err_frames;
/* Total number of received packets with alignment error */
uint64_t rx_oor_len_frames;
/* Total number of received frames with out-of-range length */
uint64_t rx_code_err_frames;
/* Total number of received frames with error termination */
uint64_t rx_false_carrier_frames;
/*
* Total number of received frames with a false carrier is
* detected during idle, as defined by RX_ER samples active and
* RXD is 0xE. The event is reported along with the statistics
* generated on the next received frame. Only one false carrier
* condition can be detected and logged between frames. Carrier
* event, valid for 10M/100M speed modes only.
*/
uint64_t rx_ovrsz_frames;
/* Total number of over-sized frames received */
uint64_t rx_jbr_frames;
/* Total number of jabber packets received */
uint64_t rx_mtu_err_frames;
/* Total number of received frames with MTU error */
uint64_t rx_match_crc_frames;
/* Total number of received frames with CRC match */
uint64_t rx_promiscuous_frames;
/* Total number of frames received promiscuously */
uint64_t rx_tagged_frames;
/* Total number of received frames with one or two VLAN tags */
uint64_t rx_double_tagged_frames;
/* Total number of received frames with two VLAN tags */
uint64_t rx_trunc_frames;
/* Total number of truncated frames received */
uint64_t rx_good_frames;
/* Total number of good frames (without errors) received */
uint64_t rx_pfc_xon2xoff_frames_pri0;
/*
* Total number of received PFC frames with transition from XON
* to XOFF on Pri 0
*/
uint64_t rx_pfc_xon2xoff_frames_pri1;
/*
* Total number of received PFC frames with transition from XON
* to XOFF on Pri 1
*/
uint64_t rx_pfc_xon2xoff_frames_pri2;
/*
* Total number of received PFC frames with transition from XON
* to XOFF on Pri 2
*/
uint64_t rx_pfc_xon2xoff_frames_pri3;
/*
* Total number of received PFC frames with transition from XON
* to XOFF on Pri 3
*/
uint64_t rx_pfc_xon2xoff_frames_pri4;
/*
* Total number of received PFC frames with transition from XON
* to XOFF on Pri 4
*/
uint64_t rx_pfc_xon2xoff_frames_pri5;
/*
* Total number of received PFC frames with transition from XON
* to XOFF on Pri 5
*/
uint64_t rx_pfc_xon2xoff_frames_pri6;
/*
* Total number of received PFC frames with transition from XON
* to XOFF on Pri 6
*/
uint64_t rx_pfc_xon2xoff_frames_pri7;
/*
* Total number of received PFC frames with transition from XON
* to XOFF on Pri 7
*/
uint64_t rx_pfc_ena_frames_pri0;
/*
* Total number of received PFC frames with PFC enabled bit for
* Pri 0
*/
uint64_t rx_pfc_ena_frames_pri1;
/*
* Total number of received PFC frames with PFC enabled bit for
* Pri 1
*/
uint64_t rx_pfc_ena_frames_pri2;
/*
* Total number of received PFC frames with PFC enabled bit for
* Pri 2
*/
uint64_t rx_pfc_ena_frames_pri3;
/*
* Total number of received PFC frames with PFC enabled bit for
* Pri 3
*/
uint64_t rx_pfc_ena_frames_pri4;
/*
* Total number of received PFC frames with PFC enabled bit for
* Pri 4
*/
uint64_t rx_pfc_ena_frames_pri5;
/*
* Total number of received PFC frames with PFC enabled bit for
* Pri 5
*/
uint64_t rx_pfc_ena_frames_pri6;
/*
* Total number of received PFC frames with PFC enabled bit for
* Pri 6
*/
uint64_t rx_pfc_ena_frames_pri7;
/*
* Total number of received PFC frames with PFC enabled bit for
* Pri 7
*/
uint64_t rx_sch_crc_err_frames;
/* Total Number of frames received with SCH CRC error */
uint64_t rx_undrsz_frames;
/* Total Number of under-sized frames received */
uint64_t rx_frag_frames;
/* Total Number of fragmented frames received */
uint64_t rx_eee_lpi_events;
/* Total number of RX EEE LPI Events */
uint64_t rx_eee_lpi_duration;
/* EEE LPI Duration Counter on RX */
uint64_t rx_llfc_physical_msgs;
/*
* Total number of physical type Link Level Flow Control (LLFC)
* messages received
*/
uint64_t rx_llfc_logical_msgs;
/*
* Total number of logical type Link Level Flow Control (LLFC)
* messages received
*/
uint64_t rx_llfc_msgs_with_crc_err;
/*
* Total number of logical type Link Level Flow Control (LLFC)
* messages received with CRC error
*/
uint64_t rx_hcfc_msgs;
/* Total number of HCFC messages received */
uint64_t rx_hcfc_msgs_with_crc_err;
/* Total number of HCFC messages received with CRC error */
uint64_t rx_bytes;
/* Total number of received bytes */
uint64_t rx_runt_bytes;
/* Total number of bytes received in runt frames */
uint64_t rx_runt_frames;
/* Total number of runt frames received */
uint64_t rx_stat_discard;
/* Total Rx Discards per Port reported by STATS block */
uint64_t rx_stat_err;
/* Total Rx Error Drops per Port reported by STATS block */
} __attribute__((packed));
/* Periodic Statistics Context DMA to host (160 bytes) */
/*
* per-context HW statistics -- chip view
*/
struct ctx_hw_stats64 {
uint64_t rx_ucast_pkts;
uint64_t rx_mcast_pkts;
uint64_t rx_bcast_pkts;
uint64_t rx_drop_pkts;
uint64_t rx_discard_pkts;
uint64_t rx_ucast_bytes;
uint64_t rx_mcast_bytes;
uint64_t rx_bcast_bytes;
uint64_t tx_ucast_pkts;
uint64_t tx_mcast_pkts;
uint64_t tx_bcast_pkts;
uint64_t tx_drop_pkts;
uint64_t tx_discard_pkts;
uint64_t tx_ucast_bytes;
uint64_t tx_mcast_bytes;
uint64_t tx_bcast_bytes;
uint64_t tpa_pkts;
uint64_t tpa_bytes;
uint64_t tpa_events;
uint64_t tpa_aborts;
} __attribute__((packed));
#endif /* _HSI_STRUCT_DEF_DPDK_ */
Reference in New Issue View Git Blame Copy Permalink