dde524d3ff
Make is no longer supported for compiling DPDK, references are now removed in the documentation. Signed-off-by: Ciara Power <ciara.power@intel.com> Acked-by: Matan Azrad <matan@nvidia.com>
94 lines
3.4 KiB
ReStructuredText
94 lines
3.4 KiB
ReStructuredText
.. SPDX-License-Identifier: BSD-3-Clause
|
|
Copyright(c) 2018 Intel Corporation.
|
|
|
|
IFCVF vDPA driver
|
|
=================
|
|
|
|
The IFCVF vDPA (vhost data path acceleration) driver provides support for the
|
|
Intel FPGA 100G VF (IFCVF). IFCVF's datapath is virtio ring compatible, it
|
|
works as a HW vhost backend which can send/receive packets to/from virtio
|
|
directly by DMA. Besides, it supports dirty page logging and device state
|
|
report/restore, this driver enables its vDPA functionality.
|
|
|
|
|
|
IFCVF vDPA Implementation
|
|
-------------------------
|
|
|
|
IFCVF's vendor ID and device ID are same as that of virtio net pci device,
|
|
with its specific subsystem vendor ID and device ID. To let the device be
|
|
probed by IFCVF driver, adding "vdpa=1" parameter helps to specify that this
|
|
device is to be used in vDPA mode, rather than polling mode, virtio pmd will
|
|
skip when it detects this message. If no this parameter specified, device
|
|
will not be used as a vDPA device, and it will be driven by virtio pmd.
|
|
|
|
Different VF devices serve different virtio frontends which are in different
|
|
VMs, so each VF needs to have its own DMA address translation service. During
|
|
the driver probe a new container is created for this device, with this
|
|
container vDPA driver can program DMA remapping table with the VM's memory
|
|
region information.
|
|
|
|
The device argument "sw-live-migration=1" will configure the driver into SW
|
|
assisted live migration mode. In this mode, the driver will set up a SW relay
|
|
thread when LM happens, this thread will help device to log dirty pages. Thus
|
|
this mode does not require HW to implement a dirty page logging function block,
|
|
but will consume some percentage of CPU resource depending on the network
|
|
throughput. If no this parameter specified, driver will rely on device's logging
|
|
capability.
|
|
|
|
Key IFCVF vDPA driver ops
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
- ifcvf_dev_config:
|
|
Enable VF data path with virtio information provided by vhost lib, including
|
|
IOMMU programming to enable VF DMA to VM's memory, VFIO interrupt setup to
|
|
route HW interrupt to virtio driver, create notify relay thread to translate
|
|
virtio driver's kick to a MMIO write onto HW, HW queues configuration.
|
|
|
|
This function gets called to set up HW data path backend when virtio driver
|
|
in VM gets ready.
|
|
|
|
- ifcvf_dev_close:
|
|
Revoke all the setup in ifcvf_dev_config.
|
|
|
|
This function gets called when virtio driver stops device in VM.
|
|
|
|
To create a vhost port with IFC VF
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
- Create a vhost socket and assign a VF's device ID to this socket via
|
|
vhost API. When QEMU vhost connection gets ready, the assigned VF will
|
|
get configured automatically.
|
|
|
|
|
|
Features
|
|
--------
|
|
|
|
Features of the IFCVF driver are:
|
|
|
|
- Compatibility with virtio 0.95 and 1.0.
|
|
- SW assisted vDPA live migration.
|
|
|
|
|
|
Prerequisites
|
|
-------------
|
|
|
|
- Platform with IOMMU feature. IFC VF needs address translation service to
|
|
Rx/Tx directly with virtio driver in VM.
|
|
|
|
|
|
Limitations
|
|
-----------
|
|
|
|
Dependency on vfio-pci
|
|
~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
vDPA driver needs to setup VF MSIX interrupts, each queue's interrupt vector
|
|
is mapped to a callfd associated with a virtio ring. Currently only vfio-pci
|
|
allows multiple interrupts, so the IFCVF driver is dependent on vfio-pci.
|
|
|
|
Live Migration with VIRTIO_NET_F_GUEST_ANNOUNCE
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
IFC VF doesn't support RARP packet generation, virtio frontend supporting
|
|
VIRTIO_NET_F_GUEST_ANNOUNCE feature can help to do that.
|