numam-dpdk/app/test/test_lpm6_perf.c
Wei Dai 5450a8671b app/test: reduce IPv6 LPM data size
copy app/test/test_lpm6_routes.h to app/test/test_lpm6_data.h .
and then delete app/test/test_lpm6_routes.h and clear the
large_ips_table[ ] to make LPM6 test case size much smaller than
before. Also add codes in app/test/test_lpm6_data.h to generate test
data in large_ips_table[ ] at run time.

Signed-off-by: Wei Dai <wei.dai@intel.com>
2016-10-13 15:40:58 +02:00

193 lines
5.6 KiB
C

/*-
* BSD LICENSE
*
* Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <stdio.h>
#include <stdint.h>
#include <stdlib.h>
#include <string.h>
#include <rte_cycles.h>
#include <rte_random.h>
#include <rte_memory.h>
#include <rte_lpm6.h>
#include "test.h"
#include "test_lpm6_data.h"
#define TEST_LPM_ASSERT(cond) do { \
if (!(cond)) { \
printf("Error at line %d: \n", __LINE__); \
return -1; \
} \
} while(0)
#define ITERATIONS (1 << 10)
#define BATCH_SIZE 100000
#define NUMBER_TBL8S (1 << 16)
static void
print_route_distribution(const struct rules_tbl_entry *table, uint32_t n)
{
unsigned i, j;
printf("Route distribution per prefix width: \n");
printf("DEPTH QUANTITY (PERCENT)\n");
printf("--------------------------- \n");
/* Count depths. */
for(i = 1; i <= 128; i++) {
unsigned depth_counter = 0;
double percent_hits;
for (j = 0; j < n; j++)
if (table[j].depth == (uint8_t) i)
depth_counter++;
percent_hits = ((double)depth_counter)/((double)n) * 100;
printf("%.2u%15u (%.2f)\n", i, depth_counter, percent_hits);
}
printf("\n");
}
static int
test_lpm6_perf(void)
{
struct rte_lpm6 *lpm = NULL;
struct rte_lpm6_config config;
uint64_t begin, total_time;
unsigned i, j;
uint8_t next_hop_add = 0xAA, next_hop_return = 0;
int status = 0;
int64_t count = 0;
config.max_rules = 1000000;
config.number_tbl8s = NUMBER_TBL8S;
config.flags = 0;
rte_srand(rte_rdtsc());
printf("No. routes = %u\n", (unsigned) NUM_ROUTE_ENTRIES);
print_route_distribution(large_route_table, (uint32_t) NUM_ROUTE_ENTRIES);
/* Only generate IPv6 address of each item in large IPS table,
* here next_hop is not needed.
*/
generate_large_ips_table(0);
lpm = rte_lpm6_create(__func__, SOCKET_ID_ANY, &config);
TEST_LPM_ASSERT(lpm != NULL);
/* Measure add. */
begin = rte_rdtsc();
for (i = 0; i < NUM_ROUTE_ENTRIES; i++) {
if (rte_lpm6_add(lpm, large_route_table[i].ip,
large_route_table[i].depth, next_hop_add) == 0)
status++;
}
/* End Timer. */
total_time = rte_rdtsc() - begin;
printf("Unique added entries = %d\n", status);
printf("Average LPM Add: %g cycles\n",
(double)total_time / NUM_ROUTE_ENTRIES);
/* Measure single Lookup */
total_time = 0;
count = 0;
for (i = 0; i < ITERATIONS; i ++) {
begin = rte_rdtsc();
for (j = 0; j < NUM_IPS_ENTRIES; j ++) {
if (rte_lpm6_lookup(lpm, large_ips_table[j].ip,
&next_hop_return) != 0)
count++;
}
total_time += rte_rdtsc() - begin;
}
printf("Average LPM Lookup: %.1f cycles (fails = %.1f%%)\n",
(double)total_time / ((double)ITERATIONS * BATCH_SIZE),
(count * 100.0) / (double)(ITERATIONS * BATCH_SIZE));
/* Measure bulk Lookup */
total_time = 0;
count = 0;
uint8_t ip_batch[NUM_IPS_ENTRIES][16];
int16_t next_hops[NUM_IPS_ENTRIES];
for (i = 0; i < NUM_IPS_ENTRIES; i++)
memcpy(ip_batch[i], large_ips_table[i].ip, 16);
for (i = 0; i < ITERATIONS; i ++) {
/* Lookup per batch */
begin = rte_rdtsc();
rte_lpm6_lookup_bulk_func(lpm, ip_batch, next_hops, NUM_IPS_ENTRIES);
total_time += rte_rdtsc() - begin;
for (j = 0; j < NUM_IPS_ENTRIES; j++)
if (next_hops[j] < 0)
count++;
}
printf("BULK LPM Lookup: %.1f cycles (fails = %.1f%%)\n",
(double)total_time / ((double)ITERATIONS * BATCH_SIZE),
(count * 100.0) / (double)(ITERATIONS * BATCH_SIZE));
/* Delete */
status = 0;
begin = rte_rdtsc();
for (i = 0; i < NUM_ROUTE_ENTRIES; i++) {
/* rte_lpm_delete(lpm, ip, depth) */
status += rte_lpm6_delete(lpm, large_route_table[i].ip,
large_route_table[i].depth);
}
total_time += rte_rdtsc() - begin;
printf("Average LPM Delete: %g cycles\n",
(double)total_time / NUM_ROUTE_ENTRIES);
rte_lpm6_delete_all(lpm);
rte_lpm6_free(lpm);
return 0;
}
REGISTER_TEST_COMMAND(lpm6_perf_autotest, test_lpm6_perf);