ff6dc76e40
Currently, the logic of the PF and VF initialization codes for multiple process is the same. A common function can be extracted to initialize and unload multiple process. Signed-off-by: Huisong Li <lihuisong@huawei.com> Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
2829 lines
77 KiB
C
2829 lines
77 KiB
C
/* SPDX-License-Identifier: BSD-3-Clause
|
|
* Copyright(c) 2018-2021 HiSilicon Limited.
|
|
*/
|
|
|
|
#include <linux/pci_regs.h>
|
|
#include <rte_alarm.h>
|
|
#include <ethdev_pci.h>
|
|
#include <rte_io.h>
|
|
#include <rte_pci.h>
|
|
#include <rte_vfio.h>
|
|
|
|
#include "hns3_ethdev.h"
|
|
#include "hns3_logs.h"
|
|
#include "hns3_rxtx.h"
|
|
#include "hns3_regs.h"
|
|
#include "hns3_intr.h"
|
|
#include "hns3_dcb.h"
|
|
#include "hns3_mp.h"
|
|
|
|
#define HNS3VF_KEEP_ALIVE_INTERVAL 2000000 /* us */
|
|
#define HNS3VF_SERVICE_INTERVAL 1000000 /* us */
|
|
|
|
#define HNS3VF_RESET_WAIT_MS 20
|
|
#define HNS3VF_RESET_WAIT_CNT 2000
|
|
|
|
/* Reset related Registers */
|
|
#define HNS3_GLOBAL_RESET_BIT 0
|
|
#define HNS3_CORE_RESET_BIT 1
|
|
#define HNS3_IMP_RESET_BIT 2
|
|
#define HNS3_FUN_RST_ING_B 0
|
|
|
|
enum hns3vf_evt_cause {
|
|
HNS3VF_VECTOR0_EVENT_RST,
|
|
HNS3VF_VECTOR0_EVENT_MBX,
|
|
HNS3VF_VECTOR0_EVENT_OTHER,
|
|
};
|
|
|
|
static enum hns3_reset_level hns3vf_get_reset_level(struct hns3_hw *hw,
|
|
uint64_t *levels);
|
|
static int hns3vf_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
|
|
static int hns3vf_dev_configure_vlan(struct rte_eth_dev *dev);
|
|
|
|
static int hns3vf_add_mc_mac_addr(struct hns3_hw *hw,
|
|
struct rte_ether_addr *mac_addr);
|
|
static int hns3vf_remove_mc_mac_addr(struct hns3_hw *hw,
|
|
struct rte_ether_addr *mac_addr);
|
|
static int hns3vf_dev_link_update(struct rte_eth_dev *eth_dev,
|
|
__rte_unused int wait_to_complete);
|
|
|
|
/* set PCI bus mastering */
|
|
static int
|
|
hns3vf_set_bus_master(const struct rte_pci_device *device, bool op)
|
|
{
|
|
uint16_t reg;
|
|
int ret;
|
|
|
|
ret = rte_pci_read_config(device, ®, sizeof(reg), PCI_COMMAND);
|
|
if (ret < 0) {
|
|
PMD_INIT_LOG(ERR, "Failed to read PCI offset 0x%x",
|
|
PCI_COMMAND);
|
|
return ret;
|
|
}
|
|
|
|
if (op)
|
|
/* set the master bit */
|
|
reg |= PCI_COMMAND_MASTER;
|
|
else
|
|
reg &= ~(PCI_COMMAND_MASTER);
|
|
|
|
return rte_pci_write_config(device, ®, sizeof(reg), PCI_COMMAND);
|
|
}
|
|
|
|
/**
|
|
* hns3vf_find_pci_capability - lookup a capability in the PCI capability list
|
|
* @cap: the capability
|
|
*
|
|
* Return the address of the given capability within the PCI capability list.
|
|
*/
|
|
static int
|
|
hns3vf_find_pci_capability(const struct rte_pci_device *device, int cap)
|
|
{
|
|
#define MAX_PCIE_CAPABILITY 48
|
|
uint16_t status;
|
|
uint8_t pos;
|
|
uint8_t id;
|
|
int ttl;
|
|
int ret;
|
|
|
|
ret = rte_pci_read_config(device, &status, sizeof(status), PCI_STATUS);
|
|
if (ret < 0) {
|
|
PMD_INIT_LOG(ERR, "Failed to read PCI offset 0x%x", PCI_STATUS);
|
|
return 0;
|
|
}
|
|
|
|
if (!(status & PCI_STATUS_CAP_LIST))
|
|
return 0;
|
|
|
|
ttl = MAX_PCIE_CAPABILITY;
|
|
ret = rte_pci_read_config(device, &pos, sizeof(pos),
|
|
PCI_CAPABILITY_LIST);
|
|
if (ret < 0) {
|
|
PMD_INIT_LOG(ERR, "Failed to read PCI offset 0x%x",
|
|
PCI_CAPABILITY_LIST);
|
|
return 0;
|
|
}
|
|
|
|
while (ttl-- && pos >= PCI_STD_HEADER_SIZEOF) {
|
|
ret = rte_pci_read_config(device, &id, sizeof(id),
|
|
(pos + PCI_CAP_LIST_ID));
|
|
if (ret < 0) {
|
|
PMD_INIT_LOG(ERR, "Failed to read PCI offset 0x%x",
|
|
(pos + PCI_CAP_LIST_ID));
|
|
break;
|
|
}
|
|
|
|
if (id == 0xFF)
|
|
break;
|
|
|
|
if (id == cap)
|
|
return (int)pos;
|
|
|
|
ret = rte_pci_read_config(device, &pos, sizeof(pos),
|
|
(pos + PCI_CAP_LIST_NEXT));
|
|
if (ret < 0) {
|
|
PMD_INIT_LOG(ERR, "Failed to read PCI offset 0x%x",
|
|
(pos + PCI_CAP_LIST_NEXT));
|
|
break;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3vf_enable_msix(const struct rte_pci_device *device, bool op)
|
|
{
|
|
uint16_t control;
|
|
int pos;
|
|
int ret;
|
|
|
|
pos = hns3vf_find_pci_capability(device, PCI_CAP_ID_MSIX);
|
|
if (pos) {
|
|
ret = rte_pci_read_config(device, &control, sizeof(control),
|
|
(pos + PCI_MSIX_FLAGS));
|
|
if (ret < 0) {
|
|
PMD_INIT_LOG(ERR, "Failed to read PCI offset 0x%x",
|
|
(pos + PCI_MSIX_FLAGS));
|
|
return -ENXIO;
|
|
}
|
|
|
|
if (op)
|
|
control |= PCI_MSIX_FLAGS_ENABLE;
|
|
else
|
|
control &= ~PCI_MSIX_FLAGS_ENABLE;
|
|
ret = rte_pci_write_config(device, &control, sizeof(control),
|
|
(pos + PCI_MSIX_FLAGS));
|
|
if (ret < 0) {
|
|
PMD_INIT_LOG(ERR, "failed to write PCI offset 0x%x",
|
|
(pos + PCI_MSIX_FLAGS));
|
|
return -ENXIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
return -ENXIO;
|
|
}
|
|
|
|
static int
|
|
hns3vf_add_uc_mac_addr(struct hns3_hw *hw, struct rte_ether_addr *mac_addr)
|
|
{
|
|
/* mac address was checked by upper level interface */
|
|
char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
|
|
int ret;
|
|
|
|
ret = hns3_send_mbx_msg(hw, HNS3_MBX_SET_UNICAST,
|
|
HNS3_MBX_MAC_VLAN_UC_ADD, mac_addr->addr_bytes,
|
|
RTE_ETHER_ADDR_LEN, false, NULL, 0);
|
|
if (ret) {
|
|
hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
|
|
mac_addr);
|
|
hns3_err(hw, "failed to add uc mac addr(%s), ret = %d",
|
|
mac_str, ret);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3vf_remove_uc_mac_addr(struct hns3_hw *hw, struct rte_ether_addr *mac_addr)
|
|
{
|
|
/* mac address was checked by upper level interface */
|
|
char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
|
|
int ret;
|
|
|
|
ret = hns3_send_mbx_msg(hw, HNS3_MBX_SET_UNICAST,
|
|
HNS3_MBX_MAC_VLAN_UC_REMOVE,
|
|
mac_addr->addr_bytes, RTE_ETHER_ADDR_LEN,
|
|
false, NULL, 0);
|
|
if (ret) {
|
|
hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
|
|
mac_addr);
|
|
hns3_err(hw, "failed to add uc mac addr(%s), ret = %d",
|
|
mac_str, ret);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3vf_set_default_mac_addr(struct rte_eth_dev *dev,
|
|
struct rte_ether_addr *mac_addr)
|
|
{
|
|
#define HNS3_TWO_ETHER_ADDR_LEN (RTE_ETHER_ADDR_LEN * 2)
|
|
struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
|
|
struct rte_ether_addr *old_addr;
|
|
uint8_t addr_bytes[HNS3_TWO_ETHER_ADDR_LEN]; /* for 2 MAC addresses */
|
|
char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
|
|
int ret;
|
|
|
|
/*
|
|
* It has been guaranteed that input parameter named mac_addr is valid
|
|
* address in the rte layer of DPDK framework.
|
|
*/
|
|
old_addr = (struct rte_ether_addr *)hw->mac.mac_addr;
|
|
rte_spinlock_lock(&hw->lock);
|
|
memcpy(addr_bytes, mac_addr->addr_bytes, RTE_ETHER_ADDR_LEN);
|
|
memcpy(&addr_bytes[RTE_ETHER_ADDR_LEN], old_addr->addr_bytes,
|
|
RTE_ETHER_ADDR_LEN);
|
|
|
|
ret = hns3_send_mbx_msg(hw, HNS3_MBX_SET_UNICAST,
|
|
HNS3_MBX_MAC_VLAN_UC_MODIFY, addr_bytes,
|
|
HNS3_TWO_ETHER_ADDR_LEN, true, NULL, 0);
|
|
if (ret) {
|
|
/*
|
|
* The hns3 VF PMD driver depends on the hns3 PF kernel ethdev
|
|
* driver. When user has configured a MAC address for VF device
|
|
* by "ip link set ..." command based on the PF device, the hns3
|
|
* PF kernel ethdev driver does not allow VF driver to request
|
|
* reconfiguring a different default MAC address, and return
|
|
* -EPREM to VF driver through mailbox.
|
|
*/
|
|
if (ret == -EPERM) {
|
|
hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
|
|
old_addr);
|
|
hns3_warn(hw, "Has permanet mac addr(%s) for vf",
|
|
mac_str);
|
|
} else {
|
|
hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
|
|
mac_addr);
|
|
hns3_err(hw, "Failed to set mac addr(%s) for vf: %d",
|
|
mac_str, ret);
|
|
}
|
|
}
|
|
|
|
rte_ether_addr_copy(mac_addr,
|
|
(struct rte_ether_addr *)hw->mac.mac_addr);
|
|
rte_spinlock_unlock(&hw->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3vf_add_mc_mac_addr(struct hns3_hw *hw,
|
|
struct rte_ether_addr *mac_addr)
|
|
{
|
|
char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
|
|
int ret;
|
|
|
|
ret = hns3_send_mbx_msg(hw, HNS3_MBX_SET_MULTICAST,
|
|
HNS3_MBX_MAC_VLAN_MC_ADD,
|
|
mac_addr->addr_bytes, RTE_ETHER_ADDR_LEN, false,
|
|
NULL, 0);
|
|
if (ret) {
|
|
hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
|
|
mac_addr);
|
|
hns3_err(hw, "Failed to add mc mac addr(%s) for vf: %d",
|
|
mac_str, ret);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3vf_remove_mc_mac_addr(struct hns3_hw *hw,
|
|
struct rte_ether_addr *mac_addr)
|
|
{
|
|
char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
|
|
int ret;
|
|
|
|
ret = hns3_send_mbx_msg(hw, HNS3_MBX_SET_MULTICAST,
|
|
HNS3_MBX_MAC_VLAN_MC_REMOVE,
|
|
mac_addr->addr_bytes, RTE_ETHER_ADDR_LEN, false,
|
|
NULL, 0);
|
|
if (ret) {
|
|
hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
|
|
mac_addr);
|
|
hns3_err(hw, "Failed to remove mc mac addr(%s) for vf: %d",
|
|
mac_str, ret);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3vf_set_promisc_mode(struct hns3_hw *hw, bool en_bc_pmc,
|
|
bool en_uc_pmc, bool en_mc_pmc)
|
|
{
|
|
struct hns3_mbx_vf_to_pf_cmd *req;
|
|
struct hns3_cmd_desc desc;
|
|
int ret;
|
|
|
|
req = (struct hns3_mbx_vf_to_pf_cmd *)desc.data;
|
|
|
|
/*
|
|
* The hns3 VF PMD driver depends on the hns3 PF kernel ethdev driver,
|
|
* so there are some features for promiscuous/allmulticast mode in hns3
|
|
* VF PMD driver as below:
|
|
* 1. The promiscuous/allmulticast mode can be configured successfully
|
|
* only based on the trusted VF device. If based on the non trusted
|
|
* VF device, configuring promiscuous/allmulticast mode will fail.
|
|
* The hns3 VF device can be confiruged as trusted device by hns3 PF
|
|
* kernel ethdev driver on the host by the following command:
|
|
* "ip link set <eth num> vf <vf id> turst on"
|
|
* 2. After the promiscuous mode is configured successfully, hns3 VF PMD
|
|
* driver can receive the ingress and outgoing traffic. In the words,
|
|
* all the ingress packets, all the packets sent from the PF and
|
|
* other VFs on the same physical port.
|
|
* 3. Note: Because of the hardware constraints, By default vlan filter
|
|
* is enabled and couldn't be turned off based on VF device, so vlan
|
|
* filter is still effective even in promiscuous mode. If upper
|
|
* applications don't call rte_eth_dev_vlan_filter API function to
|
|
* set vlan based on VF device, hns3 VF PMD driver will can't receive
|
|
* the packets with vlan tag in promiscuoue mode.
|
|
*/
|
|
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_MBX_VF_TO_PF, false);
|
|
req->msg[0] = HNS3_MBX_SET_PROMISC_MODE;
|
|
req->msg[1] = en_bc_pmc ? 1 : 0;
|
|
req->msg[2] = en_uc_pmc ? 1 : 0;
|
|
req->msg[3] = en_mc_pmc ? 1 : 0;
|
|
req->msg[4] = hw->promisc_mode == HNS3_LIMIT_PROMISC_MODE ? 1 : 0;
|
|
|
|
ret = hns3_cmd_send(hw, &desc, 1);
|
|
if (ret)
|
|
hns3_err(hw, "Set promisc mode fail, ret = %d", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3vf_dev_promiscuous_enable(struct rte_eth_dev *dev)
|
|
{
|
|
struct hns3_adapter *hns = dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int ret;
|
|
|
|
ret = hns3vf_set_promisc_mode(hw, true, true, true);
|
|
if (ret)
|
|
hns3_err(hw, "Failed to enable promiscuous mode, ret = %d",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3vf_dev_promiscuous_disable(struct rte_eth_dev *dev)
|
|
{
|
|
bool allmulti = dev->data->all_multicast ? true : false;
|
|
struct hns3_adapter *hns = dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int ret;
|
|
|
|
ret = hns3vf_set_promisc_mode(hw, true, false, allmulti);
|
|
if (ret)
|
|
hns3_err(hw, "Failed to disable promiscuous mode, ret = %d",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3vf_dev_allmulticast_enable(struct rte_eth_dev *dev)
|
|
{
|
|
struct hns3_adapter *hns = dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int ret;
|
|
|
|
if (dev->data->promiscuous)
|
|
return 0;
|
|
|
|
ret = hns3vf_set_promisc_mode(hw, true, false, true);
|
|
if (ret)
|
|
hns3_err(hw, "Failed to enable allmulticast mode, ret = %d",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3vf_dev_allmulticast_disable(struct rte_eth_dev *dev)
|
|
{
|
|
struct hns3_adapter *hns = dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int ret;
|
|
|
|
if (dev->data->promiscuous)
|
|
return 0;
|
|
|
|
ret = hns3vf_set_promisc_mode(hw, true, false, false);
|
|
if (ret)
|
|
hns3_err(hw, "Failed to disable allmulticast mode, ret = %d",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3vf_restore_promisc(struct hns3_adapter *hns)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
bool allmulti = hw->data->all_multicast ? true : false;
|
|
|
|
if (hw->data->promiscuous)
|
|
return hns3vf_set_promisc_mode(hw, true, true, true);
|
|
|
|
return hns3vf_set_promisc_mode(hw, true, false, allmulti);
|
|
}
|
|
|
|
static int
|
|
hns3vf_bind_ring_with_vector(struct hns3_hw *hw, uint8_t vector_id,
|
|
bool mmap, enum hns3_ring_type queue_type,
|
|
uint16_t queue_id)
|
|
{
|
|
struct hns3_vf_bind_vector_msg bind_msg;
|
|
const char *op_str;
|
|
uint16_t code;
|
|
int ret;
|
|
|
|
memset(&bind_msg, 0, sizeof(bind_msg));
|
|
code = mmap ? HNS3_MBX_MAP_RING_TO_VECTOR :
|
|
HNS3_MBX_UNMAP_RING_TO_VECTOR;
|
|
bind_msg.vector_id = vector_id;
|
|
|
|
if (queue_type == HNS3_RING_TYPE_RX)
|
|
bind_msg.param[0].int_gl_index = HNS3_RING_GL_RX;
|
|
else
|
|
bind_msg.param[0].int_gl_index = HNS3_RING_GL_TX;
|
|
|
|
bind_msg.param[0].ring_type = queue_type;
|
|
bind_msg.ring_num = 1;
|
|
bind_msg.param[0].tqp_index = queue_id;
|
|
op_str = mmap ? "Map" : "Unmap";
|
|
ret = hns3_send_mbx_msg(hw, code, 0, (uint8_t *)&bind_msg,
|
|
sizeof(bind_msg), false, NULL, 0);
|
|
if (ret)
|
|
hns3_err(hw, "%s TQP %u fail, vector_id is %u, ret is %d.",
|
|
op_str, queue_id, bind_msg.vector_id, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3vf_init_ring_with_vector(struct hns3_hw *hw)
|
|
{
|
|
uint16_t vec;
|
|
int ret;
|
|
int i;
|
|
|
|
/*
|
|
* In hns3 network engine, vector 0 is always the misc interrupt of this
|
|
* function, vector 1~N can be used respectively for the queues of the
|
|
* function. Tx and Rx queues with the same number share the interrupt
|
|
* vector. In the initialization clearing the all hardware mapping
|
|
* relationship configurations between queues and interrupt vectors is
|
|
* needed, so some error caused by the residual configurations, such as
|
|
* the unexpected Tx interrupt, can be avoid.
|
|
*/
|
|
vec = hw->num_msi - 1; /* vector 0 for misc interrupt, not for queue */
|
|
if (hw->intr.mapping_mode == HNS3_INTR_MAPPING_VEC_RSV_ONE)
|
|
vec = vec - 1; /* the last interrupt is reserved */
|
|
hw->intr_tqps_num = RTE_MIN(vec, hw->tqps_num);
|
|
for (i = 0; i < hw->intr_tqps_num; i++) {
|
|
/*
|
|
* Set gap limiter/rate limiter/quanity limiter algorithm
|
|
* configuration for interrupt coalesce of queue's interrupt.
|
|
*/
|
|
hns3_set_queue_intr_gl(hw, i, HNS3_RING_GL_RX,
|
|
HNS3_TQP_INTR_GL_DEFAULT);
|
|
hns3_set_queue_intr_gl(hw, i, HNS3_RING_GL_TX,
|
|
HNS3_TQP_INTR_GL_DEFAULT);
|
|
hns3_set_queue_intr_rl(hw, i, HNS3_TQP_INTR_RL_DEFAULT);
|
|
/*
|
|
* QL(quantity limiter) is not used currently, just set 0 to
|
|
* close it.
|
|
*/
|
|
hns3_set_queue_intr_ql(hw, i, HNS3_TQP_INTR_QL_DEFAULT);
|
|
|
|
ret = hns3vf_bind_ring_with_vector(hw, vec, false,
|
|
HNS3_RING_TYPE_TX, i);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "VF fail to unbind TX ring(%d) with "
|
|
"vector: %u, ret=%d", i, vec, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = hns3vf_bind_ring_with_vector(hw, vec, false,
|
|
HNS3_RING_TYPE_RX, i);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "VF fail to unbind RX ring(%d) with "
|
|
"vector: %u, ret=%d", i, vec, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3vf_dev_configure(struct rte_eth_dev *dev)
|
|
{
|
|
struct hns3_adapter *hns = dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
struct rte_eth_conf *conf = &dev->data->dev_conf;
|
|
enum rte_eth_rx_mq_mode mq_mode = conf->rxmode.mq_mode;
|
|
uint16_t nb_rx_q = dev->data->nb_rx_queues;
|
|
uint16_t nb_tx_q = dev->data->nb_tx_queues;
|
|
struct rte_eth_rss_conf rss_conf;
|
|
bool gro_en;
|
|
int ret;
|
|
|
|
hw->cfg_max_queues = RTE_MAX(nb_rx_q, nb_tx_q);
|
|
|
|
/*
|
|
* Some versions of hardware network engine does not support
|
|
* individually enable/disable/reset the Tx or Rx queue. These devices
|
|
* must enable/disable/reset Tx and Rx queues at the same time. When the
|
|
* numbers of Tx queues allocated by upper applications are not equal to
|
|
* the numbers of Rx queues, driver needs to setup fake Tx or Rx queues
|
|
* to adjust numbers of Tx/Rx queues. otherwise, network engine can not
|
|
* work as usual. But these fake queues are imperceptible, and can not
|
|
* be used by upper applications.
|
|
*/
|
|
ret = hns3_set_fake_rx_or_tx_queues(dev, nb_rx_q, nb_tx_q);
|
|
if (ret) {
|
|
hns3_err(hw, "fail to set Rx/Tx fake queues, ret = %d.", ret);
|
|
hw->cfg_max_queues = 0;
|
|
return ret;
|
|
}
|
|
|
|
hw->adapter_state = HNS3_NIC_CONFIGURING;
|
|
if (conf->link_speeds & RTE_ETH_LINK_SPEED_FIXED) {
|
|
hns3_err(hw, "setting link speed/duplex not supported");
|
|
ret = -EINVAL;
|
|
goto cfg_err;
|
|
}
|
|
|
|
/* When RSS is not configured, redirect the packet queue 0 */
|
|
if ((uint32_t)mq_mode & RTE_ETH_MQ_RX_RSS_FLAG) {
|
|
conf->rxmode.offloads |= RTE_ETH_RX_OFFLOAD_RSS_HASH;
|
|
hw->rss_dis_flag = false;
|
|
rss_conf = conf->rx_adv_conf.rss_conf;
|
|
ret = hns3_dev_rss_hash_update(dev, &rss_conf);
|
|
if (ret)
|
|
goto cfg_err;
|
|
}
|
|
|
|
ret = hns3vf_dev_mtu_set(dev, conf->rxmode.mtu);
|
|
if (ret != 0)
|
|
goto cfg_err;
|
|
|
|
ret = hns3vf_dev_configure_vlan(dev);
|
|
if (ret)
|
|
goto cfg_err;
|
|
|
|
/* config hardware GRO */
|
|
gro_en = conf->rxmode.offloads & RTE_ETH_RX_OFFLOAD_TCP_LRO ? true : false;
|
|
ret = hns3_config_gro(hw, gro_en);
|
|
if (ret)
|
|
goto cfg_err;
|
|
|
|
hns3_init_rx_ptype_tble(dev);
|
|
|
|
hw->adapter_state = HNS3_NIC_CONFIGURED;
|
|
return 0;
|
|
|
|
cfg_err:
|
|
hw->cfg_max_queues = 0;
|
|
(void)hns3_set_fake_rx_or_tx_queues(dev, 0, 0);
|
|
hw->adapter_state = HNS3_NIC_INITIALIZED;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3vf_config_mtu(struct hns3_hw *hw, uint16_t mtu)
|
|
{
|
|
int ret;
|
|
|
|
ret = hns3_send_mbx_msg(hw, HNS3_MBX_SET_MTU, 0, (const uint8_t *)&mtu,
|
|
sizeof(mtu), true, NULL, 0);
|
|
if (ret)
|
|
hns3_err(hw, "Failed to set mtu (%u) for vf: %d", mtu, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3vf_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
|
|
{
|
|
struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
|
|
uint32_t frame_size = mtu + HNS3_ETH_OVERHEAD;
|
|
int ret;
|
|
|
|
/*
|
|
* The hns3 PF/VF devices on the same port share the hardware MTU
|
|
* configuration. Currently, we send mailbox to inform hns3 PF kernel
|
|
* ethdev driver to finish hardware MTU configuration in hns3 VF PMD
|
|
* driver, there is no need to stop the port for hns3 VF device, and the
|
|
* MTU value issued by hns3 VF PMD driver must be less than or equal to
|
|
* PF's MTU.
|
|
*/
|
|
if (__atomic_load_n(&hw->reset.resetting, __ATOMIC_RELAXED)) {
|
|
hns3_err(hw, "Failed to set mtu during resetting");
|
|
return -EIO;
|
|
}
|
|
|
|
/*
|
|
* when Rx of scattered packets is off, we have some possibility of
|
|
* using vector Rx process function or simple Rx functions in hns3 PMD
|
|
* driver. If the input MTU is increased and the maximum length of
|
|
* received packets is greater than the length of a buffer for Rx
|
|
* packet, the hardware network engine needs to use multiple BDs and
|
|
* buffers to store these packets. This will cause problems when still
|
|
* using vector Rx process function or simple Rx function to receiving
|
|
* packets. So, when Rx of scattered packets is off and device is
|
|
* started, it is not permitted to increase MTU so that the maximum
|
|
* length of Rx packets is greater than Rx buffer length.
|
|
*/
|
|
if (dev->data->dev_started && !dev->data->scattered_rx &&
|
|
frame_size > hw->rx_buf_len) {
|
|
hns3_err(hw, "failed to set mtu because current is "
|
|
"not scattered rx mode");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
rte_spinlock_lock(&hw->lock);
|
|
ret = hns3vf_config_mtu(hw, mtu);
|
|
if (ret) {
|
|
rte_spinlock_unlock(&hw->lock);
|
|
return ret;
|
|
}
|
|
rte_spinlock_unlock(&hw->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3vf_dev_infos_get(struct rte_eth_dev *eth_dev, struct rte_eth_dev_info *info)
|
|
{
|
|
struct hns3_adapter *hns = eth_dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
uint16_t q_num = hw->tqps_num;
|
|
|
|
/*
|
|
* In interrupt mode, 'max_rx_queues' is set based on the number of
|
|
* MSI-X interrupt resources of the hardware.
|
|
*/
|
|
if (hw->data->dev_conf.intr_conf.rxq == 1)
|
|
q_num = hw->intr_tqps_num;
|
|
|
|
info->max_rx_queues = q_num;
|
|
info->max_tx_queues = hw->tqps_num;
|
|
info->max_rx_pktlen = HNS3_MAX_FRAME_LEN; /* CRC included */
|
|
info->min_rx_bufsize = HNS3_MIN_BD_BUF_SIZE;
|
|
info->max_mac_addrs = HNS3_VF_UC_MACADDR_NUM;
|
|
info->max_mtu = info->max_rx_pktlen - HNS3_ETH_OVERHEAD;
|
|
info->max_lro_pkt_size = HNS3_MAX_LRO_SIZE;
|
|
|
|
info->rx_offload_capa = (RTE_ETH_RX_OFFLOAD_IPV4_CKSUM |
|
|
RTE_ETH_RX_OFFLOAD_UDP_CKSUM |
|
|
RTE_ETH_RX_OFFLOAD_TCP_CKSUM |
|
|
RTE_ETH_RX_OFFLOAD_SCTP_CKSUM |
|
|
RTE_ETH_RX_OFFLOAD_OUTER_IPV4_CKSUM |
|
|
RTE_ETH_RX_OFFLOAD_OUTER_UDP_CKSUM |
|
|
RTE_ETH_RX_OFFLOAD_SCATTER |
|
|
RTE_ETH_RX_OFFLOAD_VLAN_STRIP |
|
|
RTE_ETH_RX_OFFLOAD_VLAN_FILTER |
|
|
RTE_ETH_RX_OFFLOAD_RSS_HASH |
|
|
RTE_ETH_RX_OFFLOAD_TCP_LRO);
|
|
info->tx_offload_capa = (RTE_ETH_TX_OFFLOAD_OUTER_IPV4_CKSUM |
|
|
RTE_ETH_TX_OFFLOAD_IPV4_CKSUM |
|
|
RTE_ETH_TX_OFFLOAD_TCP_CKSUM |
|
|
RTE_ETH_TX_OFFLOAD_UDP_CKSUM |
|
|
RTE_ETH_TX_OFFLOAD_SCTP_CKSUM |
|
|
RTE_ETH_TX_OFFLOAD_MULTI_SEGS |
|
|
RTE_ETH_TX_OFFLOAD_TCP_TSO |
|
|
RTE_ETH_TX_OFFLOAD_VXLAN_TNL_TSO |
|
|
RTE_ETH_TX_OFFLOAD_GRE_TNL_TSO |
|
|
RTE_ETH_TX_OFFLOAD_GENEVE_TNL_TSO |
|
|
RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE |
|
|
hns3_txvlan_cap_get(hw));
|
|
|
|
if (hns3_dev_get_support(hw, OUTER_UDP_CKSUM))
|
|
info->tx_offload_capa |= RTE_ETH_TX_OFFLOAD_OUTER_UDP_CKSUM;
|
|
|
|
if (hns3_dev_get_support(hw, INDEP_TXRX))
|
|
info->dev_capa = RTE_ETH_DEV_CAPA_RUNTIME_RX_QUEUE_SETUP |
|
|
RTE_ETH_DEV_CAPA_RUNTIME_TX_QUEUE_SETUP;
|
|
info->dev_capa &= ~RTE_ETH_DEV_CAPA_FLOW_RULE_KEEP;
|
|
|
|
info->rx_desc_lim = (struct rte_eth_desc_lim) {
|
|
.nb_max = HNS3_MAX_RING_DESC,
|
|
.nb_min = HNS3_MIN_RING_DESC,
|
|
.nb_align = HNS3_ALIGN_RING_DESC,
|
|
};
|
|
|
|
info->tx_desc_lim = (struct rte_eth_desc_lim) {
|
|
.nb_max = HNS3_MAX_RING_DESC,
|
|
.nb_min = HNS3_MIN_RING_DESC,
|
|
.nb_align = HNS3_ALIGN_RING_DESC,
|
|
.nb_seg_max = HNS3_MAX_TSO_BD_PER_PKT,
|
|
.nb_mtu_seg_max = hw->max_non_tso_bd_num,
|
|
};
|
|
|
|
info->default_rxconf = (struct rte_eth_rxconf) {
|
|
.rx_free_thresh = HNS3_DEFAULT_RX_FREE_THRESH,
|
|
/*
|
|
* If there are no available Rx buffer descriptors, incoming
|
|
* packets are always dropped by hardware based on hns3 network
|
|
* engine.
|
|
*/
|
|
.rx_drop_en = 1,
|
|
.offloads = 0,
|
|
};
|
|
info->default_txconf = (struct rte_eth_txconf) {
|
|
.tx_rs_thresh = HNS3_DEFAULT_TX_RS_THRESH,
|
|
.offloads = 0,
|
|
};
|
|
|
|
info->reta_size = hw->rss_ind_tbl_size;
|
|
info->hash_key_size = HNS3_RSS_KEY_SIZE;
|
|
info->flow_type_rss_offloads = HNS3_ETH_RSS_SUPPORT;
|
|
|
|
info->default_rxportconf.burst_size = HNS3_DEFAULT_PORT_CONF_BURST_SIZE;
|
|
info->default_txportconf.burst_size = HNS3_DEFAULT_PORT_CONF_BURST_SIZE;
|
|
info->default_rxportconf.nb_queues = HNS3_DEFAULT_PORT_CONF_QUEUES_NUM;
|
|
info->default_txportconf.nb_queues = HNS3_DEFAULT_PORT_CONF_QUEUES_NUM;
|
|
info->default_rxportconf.ring_size = HNS3_DEFAULT_RING_DESC;
|
|
info->default_txportconf.ring_size = HNS3_DEFAULT_RING_DESC;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
hns3vf_clear_event_cause(struct hns3_hw *hw, uint32_t regclr)
|
|
{
|
|
hns3_write_dev(hw, HNS3_VECTOR0_CMDQ_SRC_REG, regclr);
|
|
}
|
|
|
|
static void
|
|
hns3vf_disable_irq0(struct hns3_hw *hw)
|
|
{
|
|
hns3_write_dev(hw, HNS3_MISC_VECTOR_REG_BASE, 0);
|
|
}
|
|
|
|
static void
|
|
hns3vf_enable_irq0(struct hns3_hw *hw)
|
|
{
|
|
hns3_write_dev(hw, HNS3_MISC_VECTOR_REG_BASE, 1);
|
|
}
|
|
|
|
static enum hns3vf_evt_cause
|
|
hns3vf_check_event_cause(struct hns3_adapter *hns, uint32_t *clearval)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
enum hns3vf_evt_cause ret;
|
|
uint32_t cmdq_stat_reg;
|
|
uint32_t rst_ing_reg;
|
|
uint32_t val;
|
|
|
|
/* Fetch the events from their corresponding regs */
|
|
cmdq_stat_reg = hns3_read_dev(hw, HNS3_VECTOR0_CMDQ_STAT_REG);
|
|
if (BIT(HNS3_VECTOR0_RST_INT_B) & cmdq_stat_reg) {
|
|
rst_ing_reg = hns3_read_dev(hw, HNS3_FUN_RST_ING);
|
|
hns3_warn(hw, "resetting reg: 0x%x", rst_ing_reg);
|
|
hns3_atomic_set_bit(HNS3_VF_RESET, &hw->reset.pending);
|
|
__atomic_store_n(&hw->reset.disable_cmd, 1, __ATOMIC_RELAXED);
|
|
val = hns3_read_dev(hw, HNS3_VF_RST_ING);
|
|
hns3_write_dev(hw, HNS3_VF_RST_ING, val | HNS3_VF_RST_ING_BIT);
|
|
val = cmdq_stat_reg & ~BIT(HNS3_VECTOR0_RST_INT_B);
|
|
if (clearval) {
|
|
hw->reset.stats.global_cnt++;
|
|
hns3_warn(hw, "Global reset detected, clear reset status");
|
|
} else {
|
|
hns3_schedule_delayed_reset(hns);
|
|
hns3_warn(hw, "Global reset detected, don't clear reset status");
|
|
}
|
|
|
|
ret = HNS3VF_VECTOR0_EVENT_RST;
|
|
goto out;
|
|
}
|
|
|
|
/* Check for vector0 mailbox(=CMDQ RX) event source */
|
|
if (BIT(HNS3_VECTOR0_RX_CMDQ_INT_B) & cmdq_stat_reg) {
|
|
val = cmdq_stat_reg & ~BIT(HNS3_VECTOR0_RX_CMDQ_INT_B);
|
|
ret = HNS3VF_VECTOR0_EVENT_MBX;
|
|
goto out;
|
|
}
|
|
|
|
val = 0;
|
|
ret = HNS3VF_VECTOR0_EVENT_OTHER;
|
|
out:
|
|
if (clearval)
|
|
*clearval = val;
|
|
return ret;
|
|
}
|
|
|
|
static void
|
|
hns3vf_interrupt_handler(void *param)
|
|
{
|
|
struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
|
|
struct hns3_adapter *hns = dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
enum hns3vf_evt_cause event_cause;
|
|
uint32_t clearval;
|
|
|
|
/* Disable interrupt */
|
|
hns3vf_disable_irq0(hw);
|
|
|
|
/* Read out interrupt causes */
|
|
event_cause = hns3vf_check_event_cause(hns, &clearval);
|
|
/* Clear interrupt causes */
|
|
hns3vf_clear_event_cause(hw, clearval);
|
|
|
|
switch (event_cause) {
|
|
case HNS3VF_VECTOR0_EVENT_RST:
|
|
hns3_schedule_reset(hns);
|
|
break;
|
|
case HNS3VF_VECTOR0_EVENT_MBX:
|
|
hns3_dev_handle_mbx_msg(hw);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* Enable interrupt */
|
|
hns3vf_enable_irq0(hw);
|
|
}
|
|
|
|
static void
|
|
hns3vf_set_default_dev_specifications(struct hns3_hw *hw)
|
|
{
|
|
hw->max_non_tso_bd_num = HNS3_MAX_NON_TSO_BD_PER_PKT;
|
|
hw->rss_ind_tbl_size = HNS3_RSS_IND_TBL_SIZE;
|
|
hw->rss_key_size = HNS3_RSS_KEY_SIZE;
|
|
hw->intr.int_ql_max = HNS3_INTR_QL_NONE;
|
|
}
|
|
|
|
static void
|
|
hns3vf_parse_dev_specifications(struct hns3_hw *hw, struct hns3_cmd_desc *desc)
|
|
{
|
|
struct hns3_dev_specs_0_cmd *req0;
|
|
|
|
req0 = (struct hns3_dev_specs_0_cmd *)desc[0].data;
|
|
|
|
hw->max_non_tso_bd_num = req0->max_non_tso_bd_num;
|
|
hw->rss_ind_tbl_size = rte_le_to_cpu_16(req0->rss_ind_tbl_size);
|
|
hw->rss_key_size = rte_le_to_cpu_16(req0->rss_key_size);
|
|
hw->intr.int_ql_max = rte_le_to_cpu_16(req0->intr_ql_max);
|
|
}
|
|
|
|
static int
|
|
hns3vf_check_dev_specifications(struct hns3_hw *hw)
|
|
{
|
|
if (hw->rss_ind_tbl_size == 0 ||
|
|
hw->rss_ind_tbl_size > HNS3_RSS_IND_TBL_SIZE_MAX) {
|
|
hns3_warn(hw, "the size of hash lookup table configured (%u)"
|
|
" exceeds the maximum(%u)", hw->rss_ind_tbl_size,
|
|
HNS3_RSS_IND_TBL_SIZE_MAX);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3vf_query_dev_specifications(struct hns3_hw *hw)
|
|
{
|
|
struct hns3_cmd_desc desc[HNS3_QUERY_DEV_SPECS_BD_NUM];
|
|
int ret;
|
|
int i;
|
|
|
|
for (i = 0; i < HNS3_QUERY_DEV_SPECS_BD_NUM - 1; i++) {
|
|
hns3_cmd_setup_basic_desc(&desc[i], HNS3_OPC_QUERY_DEV_SPECS,
|
|
true);
|
|
desc[i].flag |= rte_cpu_to_le_16(HNS3_CMD_FLAG_NEXT);
|
|
}
|
|
hns3_cmd_setup_basic_desc(&desc[i], HNS3_OPC_QUERY_DEV_SPECS, true);
|
|
|
|
ret = hns3_cmd_send(hw, desc, HNS3_QUERY_DEV_SPECS_BD_NUM);
|
|
if (ret)
|
|
return ret;
|
|
|
|
hns3vf_parse_dev_specifications(hw, desc);
|
|
|
|
return hns3vf_check_dev_specifications(hw);
|
|
}
|
|
|
|
void
|
|
hns3vf_update_push_lsc_cap(struct hns3_hw *hw, bool supported)
|
|
{
|
|
uint16_t val = supported ? HNS3_PF_PUSH_LSC_CAP_SUPPORTED :
|
|
HNS3_PF_PUSH_LSC_CAP_NOT_SUPPORTED;
|
|
uint16_t exp = HNS3_PF_PUSH_LSC_CAP_UNKNOWN;
|
|
struct hns3_vf *vf = HNS3_DEV_HW_TO_VF(hw);
|
|
|
|
if (vf->pf_push_lsc_cap == HNS3_PF_PUSH_LSC_CAP_UNKNOWN)
|
|
__atomic_compare_exchange(&vf->pf_push_lsc_cap, &exp, &val, 0,
|
|
__ATOMIC_ACQUIRE, __ATOMIC_ACQUIRE);
|
|
}
|
|
|
|
static void
|
|
hns3vf_get_push_lsc_cap(struct hns3_hw *hw)
|
|
{
|
|
#define HNS3_CHECK_PUSH_LSC_CAP_TIMEOUT_MS 500
|
|
|
|
struct rte_eth_dev *dev = &rte_eth_devices[hw->data->port_id];
|
|
int32_t remain_ms = HNS3_CHECK_PUSH_LSC_CAP_TIMEOUT_MS;
|
|
uint16_t val = HNS3_PF_PUSH_LSC_CAP_NOT_SUPPORTED;
|
|
uint16_t exp = HNS3_PF_PUSH_LSC_CAP_UNKNOWN;
|
|
struct hns3_vf *vf = HNS3_DEV_HW_TO_VF(hw);
|
|
|
|
__atomic_store_n(&vf->pf_push_lsc_cap, HNS3_PF_PUSH_LSC_CAP_UNKNOWN,
|
|
__ATOMIC_RELEASE);
|
|
|
|
(void)hns3_send_mbx_msg(hw, HNS3_MBX_GET_LINK_STATUS, 0, NULL, 0, false,
|
|
NULL, 0);
|
|
|
|
while (remain_ms > 0) {
|
|
rte_delay_ms(HNS3_POLL_RESPONE_MS);
|
|
if (__atomic_load_n(&vf->pf_push_lsc_cap, __ATOMIC_ACQUIRE) !=
|
|
HNS3_PF_PUSH_LSC_CAP_UNKNOWN)
|
|
break;
|
|
remain_ms--;
|
|
}
|
|
|
|
/*
|
|
* When exit above loop, the pf_push_lsc_cap could be one of the three
|
|
* state: unknown (means pf not ack), not_supported, supported.
|
|
* Here config it as 'not_supported' when it's 'unknown' state.
|
|
*/
|
|
__atomic_compare_exchange(&vf->pf_push_lsc_cap, &exp, &val, 0,
|
|
__ATOMIC_ACQUIRE, __ATOMIC_ACQUIRE);
|
|
|
|
if (__atomic_load_n(&vf->pf_push_lsc_cap, __ATOMIC_ACQUIRE) ==
|
|
HNS3_PF_PUSH_LSC_CAP_SUPPORTED) {
|
|
hns3_info(hw, "detect PF support push link status change!");
|
|
} else {
|
|
/*
|
|
* Framework already set RTE_ETH_DEV_INTR_LSC bit because driver
|
|
* declared RTE_PCI_DRV_INTR_LSC in drv_flags. So here cleared
|
|
* the RTE_ETH_DEV_INTR_LSC capability.
|
|
*/
|
|
dev->data->dev_flags &= ~RTE_ETH_DEV_INTR_LSC;
|
|
}
|
|
}
|
|
|
|
static int
|
|
hns3vf_get_capability(struct hns3_hw *hw)
|
|
{
|
|
struct rte_pci_device *pci_dev;
|
|
struct rte_eth_dev *eth_dev;
|
|
uint8_t revision;
|
|
int ret;
|
|
|
|
eth_dev = &rte_eth_devices[hw->data->port_id];
|
|
pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
|
|
|
|
/* Get PCI revision id */
|
|
ret = rte_pci_read_config(pci_dev, &revision, HNS3_PCI_REVISION_ID_LEN,
|
|
HNS3_PCI_REVISION_ID);
|
|
if (ret != HNS3_PCI_REVISION_ID_LEN) {
|
|
PMD_INIT_LOG(ERR, "failed to read pci revision id, ret = %d",
|
|
ret);
|
|
return -EIO;
|
|
}
|
|
hw->revision = revision;
|
|
|
|
if (revision < PCI_REVISION_ID_HIP09_A) {
|
|
hns3vf_set_default_dev_specifications(hw);
|
|
hw->intr.mapping_mode = HNS3_INTR_MAPPING_VEC_RSV_ONE;
|
|
hw->intr.gl_unit = HNS3_INTR_COALESCE_GL_UINT_2US;
|
|
hw->tso_mode = HNS3_TSO_SW_CAL_PSEUDO_H_CSUM;
|
|
hw->drop_stats_mode = HNS3_PKTS_DROP_STATS_MODE1;
|
|
hw->min_tx_pkt_len = HNS3_HIP08_MIN_TX_PKT_LEN;
|
|
hw->rss_info.ipv6_sctp_offload_supported = false;
|
|
hw->promisc_mode = HNS3_UNLIMIT_PROMISC_MODE;
|
|
return 0;
|
|
}
|
|
|
|
ret = hns3vf_query_dev_specifications(hw);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR,
|
|
"failed to query dev specifications, ret = %d",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
hw->intr.mapping_mode = HNS3_INTR_MAPPING_VEC_ALL;
|
|
hw->intr.gl_unit = HNS3_INTR_COALESCE_GL_UINT_1US;
|
|
hw->tso_mode = HNS3_TSO_HW_CAL_PSEUDO_H_CSUM;
|
|
hw->drop_stats_mode = HNS3_PKTS_DROP_STATS_MODE2;
|
|
hw->min_tx_pkt_len = HNS3_HIP09_MIN_TX_PKT_LEN;
|
|
hw->rss_info.ipv6_sctp_offload_supported = true;
|
|
hw->promisc_mode = HNS3_LIMIT_PROMISC_MODE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3vf_check_tqp_info(struct hns3_hw *hw)
|
|
{
|
|
if (hw->tqps_num == 0) {
|
|
PMD_INIT_LOG(ERR, "Get invalid tqps_num(0) from PF.");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (hw->rss_size_max == 0) {
|
|
PMD_INIT_LOG(ERR, "Get invalid rss_size_max(0) from PF.");
|
|
return -EINVAL;
|
|
}
|
|
|
|
hw->tqps_num = RTE_MIN(hw->rss_size_max, hw->tqps_num);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3vf_get_port_base_vlan_filter_state(struct hns3_hw *hw)
|
|
{
|
|
uint8_t resp_msg;
|
|
int ret;
|
|
|
|
ret = hns3_send_mbx_msg(hw, HNS3_MBX_SET_VLAN,
|
|
HNS3_MBX_GET_PORT_BASE_VLAN_STATE, NULL, 0,
|
|
true, &resp_msg, sizeof(resp_msg));
|
|
if (ret) {
|
|
if (ret == -ETIME) {
|
|
/*
|
|
* Getting current port based VLAN state from PF driver
|
|
* will not affect VF driver's basic function. Because
|
|
* the VF driver relies on hns3 PF kernel ether driver,
|
|
* to avoid introducing compatibility issues with older
|
|
* version of PF driver, no failure will be returned
|
|
* when the return value is ETIME. This return value has
|
|
* the following scenarios:
|
|
* 1) Firmware didn't return the results in time
|
|
* 2) the result return by firmware is timeout
|
|
* 3) the older version of kernel side PF driver does
|
|
* not support this mailbox message.
|
|
* For scenarios 1 and 2, it is most likely that a
|
|
* hardware error has occurred, or a hardware reset has
|
|
* occurred. In this case, these errors will be caught
|
|
* by other functions.
|
|
*/
|
|
PMD_INIT_LOG(WARNING,
|
|
"failed to get PVID state for timeout, maybe "
|
|
"kernel side PF driver doesn't support this "
|
|
"mailbox message, or firmware didn't respond.");
|
|
resp_msg = HNS3_PORT_BASE_VLAN_DISABLE;
|
|
} else {
|
|
PMD_INIT_LOG(ERR, "failed to get port based VLAN state,"
|
|
" ret = %d", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
hw->port_base_vlan_cfg.state = resp_msg ?
|
|
HNS3_PORT_BASE_VLAN_ENABLE : HNS3_PORT_BASE_VLAN_DISABLE;
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3vf_get_queue_info(struct hns3_hw *hw)
|
|
{
|
|
#define HNS3VF_TQPS_RSS_INFO_LEN 6
|
|
uint8_t resp_msg[HNS3VF_TQPS_RSS_INFO_LEN];
|
|
int ret;
|
|
|
|
ret = hns3_send_mbx_msg(hw, HNS3_MBX_GET_QINFO, 0, NULL, 0, true,
|
|
resp_msg, HNS3VF_TQPS_RSS_INFO_LEN);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "Failed to get tqp info from PF: %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
memcpy(&hw->tqps_num, &resp_msg[0], sizeof(uint16_t));
|
|
memcpy(&hw->rss_size_max, &resp_msg[2], sizeof(uint16_t));
|
|
|
|
return hns3vf_check_tqp_info(hw);
|
|
}
|
|
|
|
static int
|
|
hns3vf_get_queue_depth(struct hns3_hw *hw)
|
|
{
|
|
#define HNS3VF_TQPS_DEPTH_INFO_LEN 4
|
|
uint8_t resp_msg[HNS3VF_TQPS_DEPTH_INFO_LEN];
|
|
int ret;
|
|
|
|
ret = hns3_send_mbx_msg(hw, HNS3_MBX_GET_QDEPTH, 0, NULL, 0, true,
|
|
resp_msg, HNS3VF_TQPS_DEPTH_INFO_LEN);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "Failed to get tqp depth info from PF: %d",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
memcpy(&hw->num_tx_desc, &resp_msg[0], sizeof(uint16_t));
|
|
memcpy(&hw->num_rx_desc, &resp_msg[2], sizeof(uint16_t));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
hns3vf_update_caps(struct hns3_hw *hw, uint32_t caps)
|
|
{
|
|
if (hns3_get_bit(caps, HNS3VF_CAPS_VLAN_FLT_MOD_B))
|
|
hns3_set_bit(hw->capability,
|
|
HNS3_DEV_SUPPORT_VF_VLAN_FLT_MOD_B, 1);
|
|
}
|
|
|
|
static int
|
|
hns3vf_get_num_tc(struct hns3_hw *hw)
|
|
{
|
|
uint8_t num_tc = 0;
|
|
uint32_t i;
|
|
|
|
for (i = 0; i < HNS3_MAX_TC_NUM; i++) {
|
|
if (hw->hw_tc_map & BIT(i))
|
|
num_tc++;
|
|
}
|
|
return num_tc;
|
|
}
|
|
|
|
static int
|
|
hns3vf_get_basic_info(struct hns3_hw *hw)
|
|
{
|
|
uint8_t resp_msg[HNS3_MBX_MAX_RESP_DATA_SIZE];
|
|
struct hns3_basic_info *basic_info;
|
|
int ret;
|
|
|
|
ret = hns3_send_mbx_msg(hw, HNS3_MBX_GET_BASIC_INFO, 0, NULL, 0,
|
|
true, resp_msg, sizeof(resp_msg));
|
|
if (ret) {
|
|
hns3_err(hw, "failed to get basic info from PF, ret = %d.",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
basic_info = (struct hns3_basic_info *)resp_msg;
|
|
hw->hw_tc_map = basic_info->hw_tc_map;
|
|
hw->num_tc = hns3vf_get_num_tc(hw);
|
|
hw->pf_vf_if_version = basic_info->pf_vf_if_version;
|
|
hns3vf_update_caps(hw, basic_info->caps);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3vf_get_host_mac_addr(struct hns3_hw *hw)
|
|
{
|
|
uint8_t host_mac[RTE_ETHER_ADDR_LEN];
|
|
int ret;
|
|
|
|
ret = hns3_send_mbx_msg(hw, HNS3_MBX_GET_MAC_ADDR, 0, NULL, 0,
|
|
true, host_mac, RTE_ETHER_ADDR_LEN);
|
|
if (ret) {
|
|
hns3_err(hw, "Failed to get mac addr from PF: %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
memcpy(hw->mac.mac_addr, host_mac, RTE_ETHER_ADDR_LEN);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3vf_get_configuration(struct hns3_hw *hw)
|
|
{
|
|
int ret;
|
|
|
|
hw->mac.media_type = HNS3_MEDIA_TYPE_NONE;
|
|
hw->rss_dis_flag = false;
|
|
|
|
/* Get device capability */
|
|
ret = hns3vf_get_capability(hw);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "failed to get device capability: %d.", ret);
|
|
return ret;
|
|
}
|
|
|
|
hns3vf_get_push_lsc_cap(hw);
|
|
|
|
/* Get basic info from PF */
|
|
ret = hns3vf_get_basic_info(hw);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Get queue configuration from PF */
|
|
ret = hns3vf_get_queue_info(hw);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Get queue depth info from PF */
|
|
ret = hns3vf_get_queue_depth(hw);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Get user defined VF MAC addr from PF */
|
|
ret = hns3vf_get_host_mac_addr(hw);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return hns3vf_get_port_base_vlan_filter_state(hw);
|
|
}
|
|
|
|
static int
|
|
hns3vf_set_tc_queue_mapping(struct hns3_adapter *hns, uint16_t nb_rx_q,
|
|
uint16_t nb_tx_q)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
|
|
return hns3_queue_to_tc_mapping(hw, nb_rx_q, nb_tx_q);
|
|
}
|
|
|
|
static void
|
|
hns3vf_request_link_info(struct hns3_hw *hw)
|
|
{
|
|
struct hns3_vf *vf = HNS3_DEV_HW_TO_VF(hw);
|
|
bool send_req;
|
|
int ret;
|
|
|
|
if (__atomic_load_n(&hw->reset.resetting, __ATOMIC_RELAXED))
|
|
return;
|
|
|
|
send_req = vf->pf_push_lsc_cap == HNS3_PF_PUSH_LSC_CAP_NOT_SUPPORTED ||
|
|
vf->req_link_info_cnt > 0;
|
|
if (!send_req)
|
|
return;
|
|
|
|
ret = hns3_send_mbx_msg(hw, HNS3_MBX_GET_LINK_STATUS, 0, NULL, 0, false,
|
|
NULL, 0);
|
|
if (ret) {
|
|
hns3_err(hw, "failed to fetch link status, ret = %d", ret);
|
|
return;
|
|
}
|
|
|
|
if (vf->req_link_info_cnt > 0)
|
|
vf->req_link_info_cnt--;
|
|
}
|
|
|
|
void
|
|
hns3vf_update_link_status(struct hns3_hw *hw, uint8_t link_status,
|
|
uint32_t link_speed, uint8_t link_duplex)
|
|
{
|
|
struct rte_eth_dev *dev = &rte_eth_devices[hw->data->port_id];
|
|
struct hns3_vf *vf = HNS3_DEV_HW_TO_VF(hw);
|
|
struct hns3_mac *mac = &hw->mac;
|
|
int ret;
|
|
|
|
/*
|
|
* PF kernel driver may push link status when VF driver is in resetting,
|
|
* driver will stop polling job in this case, after resetting done
|
|
* driver will start polling job again.
|
|
* When polling job started, driver will get initial link status by
|
|
* sending request to PF kernel driver, then could update link status by
|
|
* process PF kernel driver's link status mailbox message.
|
|
*/
|
|
if (!__atomic_load_n(&vf->poll_job_started, __ATOMIC_RELAXED))
|
|
return;
|
|
|
|
if (hw->adapter_state != HNS3_NIC_STARTED)
|
|
return;
|
|
|
|
mac->link_status = link_status;
|
|
mac->link_speed = link_speed;
|
|
mac->link_duplex = link_duplex;
|
|
ret = hns3vf_dev_link_update(dev, 0);
|
|
if (ret == 0 && dev->data->dev_conf.intr_conf.lsc != 0)
|
|
hns3_start_report_lse(dev);
|
|
}
|
|
|
|
static int
|
|
hns3vf_vlan_filter_configure(struct hns3_adapter *hns, uint16_t vlan_id, int on)
|
|
{
|
|
#define HNS3VF_VLAN_MBX_MSG_LEN 5
|
|
struct hns3_hw *hw = &hns->hw;
|
|
uint8_t msg_data[HNS3VF_VLAN_MBX_MSG_LEN];
|
|
uint16_t proto = htons(RTE_ETHER_TYPE_VLAN);
|
|
uint8_t is_kill = on ? 0 : 1;
|
|
|
|
msg_data[0] = is_kill;
|
|
memcpy(&msg_data[1], &vlan_id, sizeof(vlan_id));
|
|
memcpy(&msg_data[3], &proto, sizeof(proto));
|
|
|
|
return hns3_send_mbx_msg(hw, HNS3_MBX_SET_VLAN, HNS3_MBX_VLAN_FILTER,
|
|
msg_data, HNS3VF_VLAN_MBX_MSG_LEN, true, NULL,
|
|
0);
|
|
}
|
|
|
|
static int
|
|
hns3vf_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
|
|
{
|
|
struct hns3_adapter *hns = dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int ret;
|
|
|
|
if (__atomic_load_n(&hw->reset.resetting, __ATOMIC_RELAXED)) {
|
|
hns3_err(hw,
|
|
"vf set vlan id failed during resetting, vlan_id =%u",
|
|
vlan_id);
|
|
return -EIO;
|
|
}
|
|
rte_spinlock_lock(&hw->lock);
|
|
ret = hns3vf_vlan_filter_configure(hns, vlan_id, on);
|
|
rte_spinlock_unlock(&hw->lock);
|
|
if (ret)
|
|
hns3_err(hw, "vf set vlan id failed, vlan_id =%u, ret =%d",
|
|
vlan_id, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3vf_en_vlan_filter(struct hns3_hw *hw, bool enable)
|
|
{
|
|
uint8_t msg_data;
|
|
int ret;
|
|
|
|
if (!hns3_dev_get_support(hw, VF_VLAN_FLT_MOD))
|
|
return 0;
|
|
|
|
msg_data = enable ? 1 : 0;
|
|
ret = hns3_send_mbx_msg(hw, HNS3_MBX_SET_VLAN,
|
|
HNS3_MBX_ENABLE_VLAN_FILTER, &msg_data,
|
|
sizeof(msg_data), true, NULL, 0);
|
|
if (ret)
|
|
hns3_err(hw, "%s vlan filter failed, ret = %d.",
|
|
enable ? "enable" : "disable", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3vf_en_hw_strip_rxvtag(struct hns3_hw *hw, bool enable)
|
|
{
|
|
uint8_t msg_data;
|
|
int ret;
|
|
|
|
msg_data = enable ? 1 : 0;
|
|
ret = hns3_send_mbx_msg(hw, HNS3_MBX_SET_VLAN, HNS3_MBX_VLAN_RX_OFF_CFG,
|
|
&msg_data, sizeof(msg_data), false, NULL, 0);
|
|
if (ret)
|
|
hns3_err(hw, "vf %s strip failed, ret = %d.",
|
|
enable ? "enable" : "disable", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3vf_vlan_offload_set(struct rte_eth_dev *dev, int mask)
|
|
{
|
|
struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
|
|
struct rte_eth_conf *dev_conf = &dev->data->dev_conf;
|
|
unsigned int tmp_mask;
|
|
int ret = 0;
|
|
|
|
if (__atomic_load_n(&hw->reset.resetting, __ATOMIC_RELAXED)) {
|
|
hns3_err(hw, "vf set vlan offload failed during resetting, "
|
|
"mask = 0x%x", mask);
|
|
return -EIO;
|
|
}
|
|
|
|
tmp_mask = (unsigned int)mask;
|
|
|
|
if (tmp_mask & RTE_ETH_VLAN_FILTER_MASK) {
|
|
rte_spinlock_lock(&hw->lock);
|
|
/* Enable or disable VLAN filter */
|
|
if (dev_conf->rxmode.offloads & RTE_ETH_RX_OFFLOAD_VLAN_FILTER)
|
|
ret = hns3vf_en_vlan_filter(hw, true);
|
|
else
|
|
ret = hns3vf_en_vlan_filter(hw, false);
|
|
rte_spinlock_unlock(&hw->lock);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
/* Vlan stripping setting */
|
|
if (tmp_mask & RTE_ETH_VLAN_STRIP_MASK) {
|
|
rte_spinlock_lock(&hw->lock);
|
|
/* Enable or disable VLAN stripping */
|
|
if (dev_conf->rxmode.offloads & RTE_ETH_RX_OFFLOAD_VLAN_STRIP)
|
|
ret = hns3vf_en_hw_strip_rxvtag(hw, true);
|
|
else
|
|
ret = hns3vf_en_hw_strip_rxvtag(hw, false);
|
|
rte_spinlock_unlock(&hw->lock);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3vf_handle_all_vlan_table(struct hns3_adapter *hns, int on)
|
|
{
|
|
struct rte_vlan_filter_conf *vfc;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
uint16_t vlan_id;
|
|
uint64_t vbit;
|
|
uint64_t ids;
|
|
int ret = 0;
|
|
uint32_t i;
|
|
|
|
vfc = &hw->data->vlan_filter_conf;
|
|
for (i = 0; i < RTE_DIM(vfc->ids); i++) {
|
|
if (vfc->ids[i] == 0)
|
|
continue;
|
|
ids = vfc->ids[i];
|
|
while (ids) {
|
|
/*
|
|
* 64 means the num bits of ids, one bit corresponds to
|
|
* one vlan id
|
|
*/
|
|
vlan_id = 64 * i;
|
|
/* count trailing zeroes */
|
|
vbit = ~ids & (ids - 1);
|
|
/* clear least significant bit set */
|
|
ids ^= (ids ^ (ids - 1)) ^ vbit;
|
|
for (; vbit;) {
|
|
vbit >>= 1;
|
|
vlan_id++;
|
|
}
|
|
ret = hns3vf_vlan_filter_configure(hns, vlan_id, on);
|
|
if (ret) {
|
|
hns3_err(hw,
|
|
"VF handle vlan table failed, ret =%d, on = %d",
|
|
ret, on);
|
|
return ret;
|
|
}
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3vf_remove_all_vlan_table(struct hns3_adapter *hns)
|
|
{
|
|
return hns3vf_handle_all_vlan_table(hns, 0);
|
|
}
|
|
|
|
static int
|
|
hns3vf_restore_vlan_conf(struct hns3_adapter *hns)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
struct rte_eth_conf *dev_conf;
|
|
bool en;
|
|
int ret;
|
|
|
|
dev_conf = &hw->data->dev_conf;
|
|
en = dev_conf->rxmode.offloads & RTE_ETH_RX_OFFLOAD_VLAN_STRIP ? true
|
|
: false;
|
|
ret = hns3vf_en_hw_strip_rxvtag(hw, en);
|
|
if (ret)
|
|
hns3_err(hw, "VF restore vlan conf fail, en =%d, ret =%d", en,
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3vf_dev_configure_vlan(struct rte_eth_dev *dev)
|
|
{
|
|
struct hns3_adapter *hns = dev->data->dev_private;
|
|
struct rte_eth_dev_data *data = dev->data;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int ret;
|
|
|
|
if (data->dev_conf.txmode.hw_vlan_reject_tagged ||
|
|
data->dev_conf.txmode.hw_vlan_reject_untagged ||
|
|
data->dev_conf.txmode.hw_vlan_insert_pvid) {
|
|
hns3_warn(hw, "hw_vlan_reject_tagged, hw_vlan_reject_untagged "
|
|
"or hw_vlan_insert_pvid is not support!");
|
|
}
|
|
|
|
/* Apply vlan offload setting */
|
|
ret = hns3vf_vlan_offload_set(dev, RTE_ETH_VLAN_STRIP_MASK |
|
|
RTE_ETH_VLAN_FILTER_MASK);
|
|
if (ret)
|
|
hns3_err(hw, "dev config vlan offload failed, ret = %d.", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3vf_set_alive(struct hns3_hw *hw, bool alive)
|
|
{
|
|
uint8_t msg_data;
|
|
|
|
msg_data = alive ? 1 : 0;
|
|
return hns3_send_mbx_msg(hw, HNS3_MBX_SET_ALIVE, 0, &msg_data,
|
|
sizeof(msg_data), false, NULL, 0);
|
|
}
|
|
|
|
static void
|
|
hns3vf_keep_alive_handler(void *param)
|
|
{
|
|
struct rte_eth_dev *eth_dev = (struct rte_eth_dev *)param;
|
|
struct hns3_adapter *hns = eth_dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int ret;
|
|
|
|
ret = hns3_send_mbx_msg(hw, HNS3_MBX_KEEP_ALIVE, 0, NULL, 0,
|
|
false, NULL, 0);
|
|
if (ret)
|
|
hns3_err(hw, "VF sends keeping alive cmd failed(=%d)",
|
|
ret);
|
|
|
|
rte_eal_alarm_set(HNS3VF_KEEP_ALIVE_INTERVAL, hns3vf_keep_alive_handler,
|
|
eth_dev);
|
|
}
|
|
|
|
static void
|
|
hns3vf_service_handler(void *param)
|
|
{
|
|
struct rte_eth_dev *eth_dev = (struct rte_eth_dev *)param;
|
|
struct hns3_adapter *hns = eth_dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
|
|
/*
|
|
* The query link status and reset processing are executed in the
|
|
* interrupt thread. When the IMP reset occurs, IMP will not respond,
|
|
* and the query operation will timeout after 30ms. In the case of
|
|
* multiple PF/VFs, each query failure timeout causes the IMP reset
|
|
* interrupt to fail to respond within 100ms.
|
|
* Before querying the link status, check whether there is a reset
|
|
* pending, and if so, abandon the query.
|
|
*/
|
|
if (!hns3vf_is_reset_pending(hns))
|
|
hns3vf_request_link_info(hw);
|
|
else
|
|
hns3_warn(hw, "Cancel the query when reset is pending");
|
|
|
|
rte_eal_alarm_set(HNS3VF_SERVICE_INTERVAL, hns3vf_service_handler,
|
|
eth_dev);
|
|
}
|
|
|
|
static void
|
|
hns3vf_start_poll_job(struct rte_eth_dev *dev)
|
|
{
|
|
#define HNS3_REQUEST_LINK_INFO_REMAINS_CNT 3
|
|
|
|
struct hns3_vf *vf = HNS3_DEV_PRIVATE_TO_VF(dev->data->dev_private);
|
|
|
|
if (vf->pf_push_lsc_cap == HNS3_PF_PUSH_LSC_CAP_SUPPORTED)
|
|
vf->req_link_info_cnt = HNS3_REQUEST_LINK_INFO_REMAINS_CNT;
|
|
|
|
__atomic_store_n(&vf->poll_job_started, 1, __ATOMIC_RELAXED);
|
|
|
|
hns3vf_service_handler(dev);
|
|
}
|
|
|
|
static void
|
|
hns3vf_stop_poll_job(struct rte_eth_dev *dev)
|
|
{
|
|
struct hns3_vf *vf = HNS3_DEV_PRIVATE_TO_VF(dev->data->dev_private);
|
|
|
|
rte_eal_alarm_cancel(hns3vf_service_handler, dev);
|
|
|
|
__atomic_store_n(&vf->poll_job_started, 0, __ATOMIC_RELAXED);
|
|
}
|
|
|
|
static int
|
|
hns3_query_vf_resource(struct hns3_hw *hw)
|
|
{
|
|
struct hns3_vf_res_cmd *req;
|
|
struct hns3_cmd_desc desc;
|
|
uint16_t num_msi;
|
|
int ret;
|
|
|
|
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_QUERY_VF_RSRC, true);
|
|
ret = hns3_cmd_send(hw, &desc, 1);
|
|
if (ret) {
|
|
hns3_err(hw, "query vf resource failed, ret = %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
req = (struct hns3_vf_res_cmd *)desc.data;
|
|
num_msi = hns3_get_field(rte_le_to_cpu_16(req->vf_intr_vector_number),
|
|
HNS3_VF_VEC_NUM_M, HNS3_VF_VEC_NUM_S);
|
|
if (num_msi < HNS3_MIN_VECTOR_NUM) {
|
|
hns3_err(hw, "Just %u msi resources, not enough for vf(min:%d)",
|
|
num_msi, HNS3_MIN_VECTOR_NUM);
|
|
return -EINVAL;
|
|
}
|
|
|
|
hw->num_msi = num_msi;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3vf_init_hardware(struct hns3_adapter *hns)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
uint16_t mtu = hw->data->mtu;
|
|
int ret;
|
|
|
|
ret = hns3vf_set_promisc_mode(hw, true, false, false);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = hns3vf_config_mtu(hw, mtu);
|
|
if (ret)
|
|
goto err_init_hardware;
|
|
|
|
ret = hns3vf_vlan_filter_configure(hns, 0, 1);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "Failed to initialize VLAN config: %d", ret);
|
|
goto err_init_hardware;
|
|
}
|
|
|
|
ret = hns3_config_gro(hw, false);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "Failed to config gro: %d", ret);
|
|
goto err_init_hardware;
|
|
}
|
|
|
|
/*
|
|
* In the initialization clearing the all hardware mapping relationship
|
|
* configurations between queues and interrupt vectors is needed, so
|
|
* some error caused by the residual configurations, such as the
|
|
* unexpected interrupt, can be avoid.
|
|
*/
|
|
ret = hns3vf_init_ring_with_vector(hw);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "Failed to init ring intr vector: %d", ret);
|
|
goto err_init_hardware;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_init_hardware:
|
|
(void)hns3vf_set_promisc_mode(hw, false, false, false);
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3vf_clear_vport_list(struct hns3_hw *hw)
|
|
{
|
|
return hns3_send_mbx_msg(hw, HNS3_MBX_HANDLE_VF_TBL,
|
|
HNS3_MBX_VPORT_LIST_CLEAR, NULL, 0, false,
|
|
NULL, 0);
|
|
}
|
|
|
|
static int
|
|
hns3vf_init_vf(struct rte_eth_dev *eth_dev)
|
|
{
|
|
struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
|
|
struct hns3_adapter *hns = eth_dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int ret;
|
|
|
|
PMD_INIT_FUNC_TRACE();
|
|
|
|
/* Get hardware io base address from pcie BAR2 IO space */
|
|
hw->io_base = pci_dev->mem_resource[2].addr;
|
|
|
|
/* Firmware command queue initialize */
|
|
ret = hns3_cmd_init_queue(hw);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "Failed to init cmd queue: %d", ret);
|
|
goto err_cmd_init_queue;
|
|
}
|
|
|
|
/* Firmware command initialize */
|
|
ret = hns3_cmd_init(hw);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "Failed to init cmd: %d", ret);
|
|
goto err_cmd_init;
|
|
}
|
|
|
|
hns3_tx_push_init(eth_dev);
|
|
|
|
/* Get VF resource */
|
|
ret = hns3_query_vf_resource(hw);
|
|
if (ret)
|
|
goto err_cmd_init;
|
|
|
|
rte_spinlock_init(&hw->mbx_resp.lock);
|
|
|
|
hns3vf_clear_event_cause(hw, 0);
|
|
|
|
ret = rte_intr_callback_register(pci_dev->intr_handle,
|
|
hns3vf_interrupt_handler, eth_dev);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "Failed to register intr: %d", ret);
|
|
goto err_intr_callback_register;
|
|
}
|
|
|
|
/* Enable interrupt */
|
|
rte_intr_enable(pci_dev->intr_handle);
|
|
hns3vf_enable_irq0(hw);
|
|
|
|
/* Get configuration from PF */
|
|
ret = hns3vf_get_configuration(hw);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "Failed to fetch configuration: %d", ret);
|
|
goto err_get_config;
|
|
}
|
|
|
|
ret = hns3_tqp_stats_init(hw);
|
|
if (ret)
|
|
goto err_get_config;
|
|
|
|
/* Hardware statistics of imissed registers cleared. */
|
|
ret = hns3_update_imissed_stats(hw, true);
|
|
if (ret) {
|
|
hns3_err(hw, "clear imissed stats failed, ret = %d", ret);
|
|
goto err_set_tc_queue;
|
|
}
|
|
|
|
ret = hns3vf_set_tc_queue_mapping(hns, hw->tqps_num, hw->tqps_num);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "failed to set tc info, ret = %d.", ret);
|
|
goto err_set_tc_queue;
|
|
}
|
|
|
|
ret = hns3vf_clear_vport_list(hw);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "Failed to clear tbl list: %d", ret);
|
|
goto err_set_tc_queue;
|
|
}
|
|
|
|
ret = hns3vf_init_hardware(hns);
|
|
if (ret)
|
|
goto err_set_tc_queue;
|
|
|
|
hns3_rss_set_default_args(hw);
|
|
|
|
ret = hns3vf_set_alive(hw, true);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "Failed to VF send alive to PF: %d", ret);
|
|
goto err_set_tc_queue;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_set_tc_queue:
|
|
hns3_tqp_stats_uninit(hw);
|
|
|
|
err_get_config:
|
|
hns3vf_disable_irq0(hw);
|
|
rte_intr_disable(pci_dev->intr_handle);
|
|
hns3_intr_unregister(pci_dev->intr_handle, hns3vf_interrupt_handler,
|
|
eth_dev);
|
|
err_intr_callback_register:
|
|
err_cmd_init:
|
|
hns3_cmd_uninit(hw);
|
|
hns3_cmd_destroy_queue(hw);
|
|
err_cmd_init_queue:
|
|
hw->io_base = NULL;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void
|
|
hns3vf_uninit_vf(struct rte_eth_dev *eth_dev)
|
|
{
|
|
struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
|
|
struct hns3_adapter *hns = eth_dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
|
|
PMD_INIT_FUNC_TRACE();
|
|
|
|
hns3_rss_uninit(hns);
|
|
(void)hns3_config_gro(hw, false);
|
|
(void)hns3vf_set_alive(hw, false);
|
|
(void)hns3vf_set_promisc_mode(hw, false, false, false);
|
|
hns3_flow_uninit(eth_dev);
|
|
hns3_tqp_stats_uninit(hw);
|
|
hns3vf_disable_irq0(hw);
|
|
rte_intr_disable(pci_dev->intr_handle);
|
|
hns3_intr_unregister(pci_dev->intr_handle, hns3vf_interrupt_handler,
|
|
eth_dev);
|
|
hns3_cmd_uninit(hw);
|
|
hns3_cmd_destroy_queue(hw);
|
|
hw->io_base = NULL;
|
|
}
|
|
|
|
static int
|
|
hns3vf_do_stop(struct hns3_adapter *hns)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int ret;
|
|
|
|
hw->mac.link_status = RTE_ETH_LINK_DOWN;
|
|
|
|
/*
|
|
* The "hns3vf_do_stop" function will also be called by .stop_service to
|
|
* prepare reset. At the time of global or IMP reset, the command cannot
|
|
* be sent to stop the tx/rx queues. The mbuf in Tx/Rx queues may be
|
|
* accessed during the reset process. So the mbuf can not be released
|
|
* during reset and is required to be released after the reset is
|
|
* completed.
|
|
*/
|
|
if (__atomic_load_n(&hw->reset.resetting, __ATOMIC_RELAXED) == 0)
|
|
hns3_dev_release_mbufs(hns);
|
|
|
|
if (__atomic_load_n(&hw->reset.disable_cmd, __ATOMIC_RELAXED) == 0) {
|
|
hns3_configure_all_mac_addr(hns, true);
|
|
ret = hns3_reset_all_tqps(hns);
|
|
if (ret) {
|
|
hns3_err(hw, "failed to reset all queues ret = %d",
|
|
ret);
|
|
return ret;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
hns3vf_unmap_rx_interrupt(struct rte_eth_dev *dev)
|
|
{
|
|
struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
|
|
struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
|
|
struct rte_intr_handle *intr_handle = pci_dev->intr_handle;
|
|
uint8_t base = RTE_INTR_VEC_ZERO_OFFSET;
|
|
uint8_t vec = RTE_INTR_VEC_ZERO_OFFSET;
|
|
uint16_t q_id;
|
|
|
|
if (dev->data->dev_conf.intr_conf.rxq == 0)
|
|
return;
|
|
|
|
/* unmap the ring with vector */
|
|
if (rte_intr_allow_others(intr_handle)) {
|
|
vec = RTE_INTR_VEC_RXTX_OFFSET;
|
|
base = RTE_INTR_VEC_RXTX_OFFSET;
|
|
}
|
|
if (rte_intr_dp_is_en(intr_handle)) {
|
|
for (q_id = 0; q_id < hw->used_rx_queues; q_id++) {
|
|
(void)hns3vf_bind_ring_with_vector(hw, vec, false,
|
|
HNS3_RING_TYPE_RX,
|
|
q_id);
|
|
if (vec < base + rte_intr_nb_efd_get(intr_handle)
|
|
- 1)
|
|
vec++;
|
|
}
|
|
}
|
|
/* Clean datapath event and queue/vec mapping */
|
|
rte_intr_efd_disable(intr_handle);
|
|
|
|
/* Cleanup vector list */
|
|
rte_intr_vec_list_free(intr_handle);
|
|
}
|
|
|
|
static int
|
|
hns3vf_dev_stop(struct rte_eth_dev *dev)
|
|
{
|
|
struct hns3_adapter *hns = dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
|
|
PMD_INIT_FUNC_TRACE();
|
|
dev->data->dev_started = 0;
|
|
|
|
hw->adapter_state = HNS3_NIC_STOPPING;
|
|
hns3_set_rxtx_function(dev);
|
|
rte_wmb();
|
|
/* Disable datapath on secondary process. */
|
|
hns3_mp_req_stop_rxtx(dev);
|
|
/* Prevent crashes when queues are still in use. */
|
|
rte_delay_ms(hw->cfg_max_queues);
|
|
|
|
rte_spinlock_lock(&hw->lock);
|
|
if (__atomic_load_n(&hw->reset.resetting, __ATOMIC_RELAXED) == 0) {
|
|
hns3_stop_tqps(hw);
|
|
hns3vf_do_stop(hns);
|
|
hns3vf_unmap_rx_interrupt(dev);
|
|
hw->adapter_state = HNS3_NIC_CONFIGURED;
|
|
}
|
|
hns3_rx_scattered_reset(dev);
|
|
hns3vf_stop_poll_job(dev);
|
|
hns3_stop_report_lse(dev);
|
|
rte_spinlock_unlock(&hw->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3vf_dev_close(struct rte_eth_dev *eth_dev)
|
|
{
|
|
struct hns3_adapter *hns = eth_dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int ret = 0;
|
|
|
|
if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
|
|
hns3_mp_uninit(eth_dev);
|
|
return 0;
|
|
}
|
|
|
|
if (hw->adapter_state == HNS3_NIC_STARTED)
|
|
ret = hns3vf_dev_stop(eth_dev);
|
|
|
|
hw->adapter_state = HNS3_NIC_CLOSING;
|
|
hns3_reset_abort(hns);
|
|
hw->adapter_state = HNS3_NIC_CLOSED;
|
|
rte_eal_alarm_cancel(hns3vf_keep_alive_handler, eth_dev);
|
|
hns3_configure_all_mc_mac_addr(hns, true);
|
|
hns3vf_remove_all_vlan_table(hns);
|
|
hns3vf_uninit_vf(eth_dev);
|
|
hns3_free_all_queues(eth_dev);
|
|
rte_free(hw->reset.wait_data);
|
|
hns3_mp_uninit(eth_dev);
|
|
hns3_warn(hw, "Close port %u finished", hw->data->port_id);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3vf_fw_version_get(struct rte_eth_dev *eth_dev, char *fw_version,
|
|
size_t fw_size)
|
|
{
|
|
struct hns3_adapter *hns = eth_dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
uint32_t version = hw->fw_version;
|
|
int ret;
|
|
|
|
ret = snprintf(fw_version, fw_size, "%lu.%lu.%lu.%lu",
|
|
hns3_get_field(version, HNS3_FW_VERSION_BYTE3_M,
|
|
HNS3_FW_VERSION_BYTE3_S),
|
|
hns3_get_field(version, HNS3_FW_VERSION_BYTE2_M,
|
|
HNS3_FW_VERSION_BYTE2_S),
|
|
hns3_get_field(version, HNS3_FW_VERSION_BYTE1_M,
|
|
HNS3_FW_VERSION_BYTE1_S),
|
|
hns3_get_field(version, HNS3_FW_VERSION_BYTE0_M,
|
|
HNS3_FW_VERSION_BYTE0_S));
|
|
if (ret < 0)
|
|
return -EINVAL;
|
|
|
|
ret += 1; /* add the size of '\0' */
|
|
if (fw_size < (size_t)ret)
|
|
return ret;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3vf_dev_link_update(struct rte_eth_dev *eth_dev,
|
|
__rte_unused int wait_to_complete)
|
|
{
|
|
struct hns3_adapter *hns = eth_dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
struct hns3_mac *mac = &hw->mac;
|
|
struct rte_eth_link new_link;
|
|
|
|
memset(&new_link, 0, sizeof(new_link));
|
|
switch (mac->link_speed) {
|
|
case RTE_ETH_SPEED_NUM_10M:
|
|
case RTE_ETH_SPEED_NUM_100M:
|
|
case RTE_ETH_SPEED_NUM_1G:
|
|
case RTE_ETH_SPEED_NUM_10G:
|
|
case RTE_ETH_SPEED_NUM_25G:
|
|
case RTE_ETH_SPEED_NUM_40G:
|
|
case RTE_ETH_SPEED_NUM_50G:
|
|
case RTE_ETH_SPEED_NUM_100G:
|
|
case RTE_ETH_SPEED_NUM_200G:
|
|
if (mac->link_status)
|
|
new_link.link_speed = mac->link_speed;
|
|
break;
|
|
default:
|
|
if (mac->link_status)
|
|
new_link.link_speed = RTE_ETH_SPEED_NUM_UNKNOWN;
|
|
break;
|
|
}
|
|
|
|
if (!mac->link_status)
|
|
new_link.link_speed = RTE_ETH_SPEED_NUM_NONE;
|
|
|
|
new_link.link_duplex = mac->link_duplex;
|
|
new_link.link_status = mac->link_status ? RTE_ETH_LINK_UP : RTE_ETH_LINK_DOWN;
|
|
new_link.link_autoneg =
|
|
!(eth_dev->data->dev_conf.link_speeds & RTE_ETH_LINK_SPEED_FIXED);
|
|
|
|
return rte_eth_linkstatus_set(eth_dev, &new_link);
|
|
}
|
|
|
|
static int
|
|
hns3vf_do_start(struct hns3_adapter *hns, bool reset_queue)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
uint16_t nb_rx_q = hw->data->nb_rx_queues;
|
|
uint16_t nb_tx_q = hw->data->nb_tx_queues;
|
|
int ret;
|
|
|
|
ret = hns3vf_set_tc_queue_mapping(hns, nb_rx_q, nb_tx_q);
|
|
if (ret)
|
|
return ret;
|
|
|
|
hns3_enable_rxd_adv_layout(hw);
|
|
|
|
ret = hns3_init_queues(hns, reset_queue);
|
|
if (ret)
|
|
hns3_err(hw, "failed to init queues, ret = %d.", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3vf_map_rx_interrupt(struct rte_eth_dev *dev)
|
|
{
|
|
struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
|
|
struct rte_intr_handle *intr_handle = pci_dev->intr_handle;
|
|
struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
|
|
uint8_t base = RTE_INTR_VEC_ZERO_OFFSET;
|
|
uint8_t vec = RTE_INTR_VEC_ZERO_OFFSET;
|
|
uint32_t intr_vector;
|
|
uint16_t q_id;
|
|
int ret;
|
|
|
|
/*
|
|
* hns3 needs a separate interrupt to be used as event interrupt which
|
|
* could not be shared with task queue pair, so KERNEL drivers need
|
|
* support multiple interrupt vectors.
|
|
*/
|
|
if (dev->data->dev_conf.intr_conf.rxq == 0 ||
|
|
!rte_intr_cap_multiple(intr_handle))
|
|
return 0;
|
|
|
|
rte_intr_disable(intr_handle);
|
|
intr_vector = hw->used_rx_queues;
|
|
/* It creates event fd for each intr vector when MSIX is used */
|
|
if (rte_intr_efd_enable(intr_handle, intr_vector))
|
|
return -EINVAL;
|
|
|
|
/* Allocate vector list */
|
|
if (rte_intr_vec_list_alloc(intr_handle, "intr_vec",
|
|
hw->used_rx_queues)) {
|
|
hns3_err(hw, "Failed to allocate %u rx_queues"
|
|
" intr_vec", hw->used_rx_queues);
|
|
ret = -ENOMEM;
|
|
goto vf_alloc_intr_vec_error;
|
|
}
|
|
|
|
if (rte_intr_allow_others(intr_handle)) {
|
|
vec = RTE_INTR_VEC_RXTX_OFFSET;
|
|
base = RTE_INTR_VEC_RXTX_OFFSET;
|
|
}
|
|
|
|
for (q_id = 0; q_id < hw->used_rx_queues; q_id++) {
|
|
ret = hns3vf_bind_ring_with_vector(hw, vec, true,
|
|
HNS3_RING_TYPE_RX, q_id);
|
|
if (ret)
|
|
goto vf_bind_vector_error;
|
|
|
|
if (rte_intr_vec_list_index_set(intr_handle, q_id, vec))
|
|
goto vf_bind_vector_error;
|
|
|
|
/*
|
|
* If there are not enough efds (e.g. not enough interrupt),
|
|
* remaining queues will be bond to the last interrupt.
|
|
*/
|
|
if (vec < base + rte_intr_nb_efd_get(intr_handle) - 1)
|
|
vec++;
|
|
}
|
|
rte_intr_enable(intr_handle);
|
|
return 0;
|
|
|
|
vf_bind_vector_error:
|
|
rte_intr_vec_list_free(intr_handle);
|
|
vf_alloc_intr_vec_error:
|
|
rte_intr_efd_disable(intr_handle);
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3vf_restore_rx_interrupt(struct hns3_hw *hw)
|
|
{
|
|
struct rte_eth_dev *dev = &rte_eth_devices[hw->data->port_id];
|
|
struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
|
|
struct rte_intr_handle *intr_handle = pci_dev->intr_handle;
|
|
uint16_t q_id;
|
|
int ret;
|
|
|
|
if (dev->data->dev_conf.intr_conf.rxq == 0)
|
|
return 0;
|
|
|
|
if (rte_intr_dp_is_en(intr_handle)) {
|
|
for (q_id = 0; q_id < hw->used_rx_queues; q_id++) {
|
|
ret = hns3vf_bind_ring_with_vector(hw,
|
|
rte_intr_vec_list_index_get(intr_handle,
|
|
q_id),
|
|
true, HNS3_RING_TYPE_RX, q_id);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
hns3vf_restore_filter(struct rte_eth_dev *dev)
|
|
{
|
|
hns3_restore_rss_filter(dev);
|
|
}
|
|
|
|
static int
|
|
hns3vf_dev_start(struct rte_eth_dev *dev)
|
|
{
|
|
struct hns3_adapter *hns = dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int ret;
|
|
|
|
PMD_INIT_FUNC_TRACE();
|
|
if (__atomic_load_n(&hw->reset.resetting, __ATOMIC_RELAXED))
|
|
return -EBUSY;
|
|
|
|
rte_spinlock_lock(&hw->lock);
|
|
hw->adapter_state = HNS3_NIC_STARTING;
|
|
ret = hns3vf_do_start(hns, true);
|
|
if (ret) {
|
|
hw->adapter_state = HNS3_NIC_CONFIGURED;
|
|
rte_spinlock_unlock(&hw->lock);
|
|
return ret;
|
|
}
|
|
ret = hns3vf_map_rx_interrupt(dev);
|
|
if (ret)
|
|
goto map_rx_inter_err;
|
|
|
|
/*
|
|
* There are three register used to control the status of a TQP
|
|
* (contains a pair of Tx queue and Rx queue) in the new version network
|
|
* engine. One is used to control the enabling of Tx queue, the other is
|
|
* used to control the enabling of Rx queue, and the last is the master
|
|
* switch used to control the enabling of the tqp. The Tx register and
|
|
* TQP register must be enabled at the same time to enable a Tx queue.
|
|
* The same applies to the Rx queue. For the older network enginem, this
|
|
* function only refresh the enabled flag, and it is used to update the
|
|
* status of queue in the dpdk framework.
|
|
*/
|
|
ret = hns3_start_all_txqs(dev);
|
|
if (ret)
|
|
goto map_rx_inter_err;
|
|
|
|
ret = hns3_start_all_rxqs(dev);
|
|
if (ret)
|
|
goto start_all_rxqs_fail;
|
|
|
|
hw->adapter_state = HNS3_NIC_STARTED;
|
|
rte_spinlock_unlock(&hw->lock);
|
|
|
|
hns3_rx_scattered_calc(dev);
|
|
hns3_set_rxtx_function(dev);
|
|
hns3_mp_req_start_rxtx(dev);
|
|
|
|
hns3vf_restore_filter(dev);
|
|
|
|
/* Enable interrupt of all rx queues before enabling queues */
|
|
hns3_dev_all_rx_queue_intr_enable(hw, true);
|
|
hns3_start_tqps(hw);
|
|
|
|
if (dev->data->dev_conf.intr_conf.lsc != 0)
|
|
hns3vf_dev_link_update(dev, 0);
|
|
hns3vf_start_poll_job(dev);
|
|
|
|
return ret;
|
|
|
|
start_all_rxqs_fail:
|
|
hns3_stop_all_txqs(dev);
|
|
map_rx_inter_err:
|
|
(void)hns3vf_do_stop(hns);
|
|
hw->adapter_state = HNS3_NIC_CONFIGURED;
|
|
rte_spinlock_unlock(&hw->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static bool
|
|
is_vf_reset_done(struct hns3_hw *hw)
|
|
{
|
|
#define HNS3_FUN_RST_ING_BITS \
|
|
(BIT(HNS3_VECTOR0_GLOBALRESET_INT_B) | \
|
|
BIT(HNS3_VECTOR0_CORERESET_INT_B) | \
|
|
BIT(HNS3_VECTOR0_IMPRESET_INT_B) | \
|
|
BIT(HNS3_VECTOR0_FUNCRESET_INT_B))
|
|
|
|
uint32_t val;
|
|
|
|
if (hw->reset.level == HNS3_VF_RESET) {
|
|
val = hns3_read_dev(hw, HNS3_VF_RST_ING);
|
|
if (val & HNS3_VF_RST_ING_BIT)
|
|
return false;
|
|
} else {
|
|
val = hns3_read_dev(hw, HNS3_FUN_RST_ING);
|
|
if (val & HNS3_FUN_RST_ING_BITS)
|
|
return false;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
bool
|
|
hns3vf_is_reset_pending(struct hns3_adapter *hns)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
enum hns3_reset_level reset;
|
|
|
|
/*
|
|
* According to the protocol of PCIe, FLR to a PF device resets the PF
|
|
* state as well as the SR-IOV extended capability including VF Enable
|
|
* which means that VFs no longer exist.
|
|
*
|
|
* HNS3_VF_FULL_RESET means PF device is in FLR reset. when PF device
|
|
* is in FLR stage, the register state of VF device is not reliable,
|
|
* so register states detection can not be carried out. In this case,
|
|
* we just ignore the register states and return false to indicate that
|
|
* there are no other reset states that need to be processed by driver.
|
|
*/
|
|
if (hw->reset.level == HNS3_VF_FULL_RESET)
|
|
return false;
|
|
|
|
/* Check the registers to confirm whether there is reset pending */
|
|
hns3vf_check_event_cause(hns, NULL);
|
|
reset = hns3vf_get_reset_level(hw, &hw->reset.pending);
|
|
if (hw->reset.level != HNS3_NONE_RESET && reset != HNS3_NONE_RESET &&
|
|
hw->reset.level < reset) {
|
|
hns3_warn(hw, "High level reset %d is pending", reset);
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
static int
|
|
hns3vf_wait_hardware_ready(struct hns3_adapter *hns)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
struct hns3_wait_data *wait_data = hw->reset.wait_data;
|
|
struct timeval tv;
|
|
|
|
if (wait_data->result == HNS3_WAIT_SUCCESS) {
|
|
/*
|
|
* After vf reset is ready, the PF may not have completed
|
|
* the reset processing. The vf sending mbox to PF may fail
|
|
* during the pf reset, so it is better to add extra delay.
|
|
*/
|
|
if (hw->reset.level == HNS3_VF_FUNC_RESET ||
|
|
hw->reset.level == HNS3_FLR_RESET)
|
|
return 0;
|
|
/* Reset retry process, no need to add extra delay. */
|
|
if (hw->reset.attempts)
|
|
return 0;
|
|
if (wait_data->check_completion == NULL)
|
|
return 0;
|
|
|
|
wait_data->check_completion = NULL;
|
|
wait_data->interval = 1 * MSEC_PER_SEC * USEC_PER_MSEC;
|
|
wait_data->count = 1;
|
|
wait_data->result = HNS3_WAIT_REQUEST;
|
|
rte_eal_alarm_set(wait_data->interval, hns3_wait_callback,
|
|
wait_data);
|
|
hns3_warn(hw, "hardware is ready, delay 1 sec for PF reset complete");
|
|
return -EAGAIN;
|
|
} else if (wait_data->result == HNS3_WAIT_TIMEOUT) {
|
|
hns3_clock_gettime(&tv);
|
|
hns3_warn(hw, "Reset step4 hardware not ready after reset time=%ld.%.6ld",
|
|
tv.tv_sec, tv.tv_usec);
|
|
return -ETIME;
|
|
} else if (wait_data->result == HNS3_WAIT_REQUEST)
|
|
return -EAGAIN;
|
|
|
|
wait_data->hns = hns;
|
|
wait_data->check_completion = is_vf_reset_done;
|
|
wait_data->end_ms = (uint64_t)HNS3VF_RESET_WAIT_CNT *
|
|
HNS3VF_RESET_WAIT_MS + hns3_clock_gettime_ms();
|
|
wait_data->interval = HNS3VF_RESET_WAIT_MS * USEC_PER_MSEC;
|
|
wait_data->count = HNS3VF_RESET_WAIT_CNT;
|
|
wait_data->result = HNS3_WAIT_REQUEST;
|
|
rte_eal_alarm_set(wait_data->interval, hns3_wait_callback, wait_data);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
static int
|
|
hns3vf_prepare_reset(struct hns3_adapter *hns)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int ret;
|
|
|
|
if (hw->reset.level == HNS3_VF_FUNC_RESET) {
|
|
ret = hns3_send_mbx_msg(hw, HNS3_MBX_RESET, 0, NULL,
|
|
0, true, NULL, 0);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
__atomic_store_n(&hw->reset.disable_cmd, 1, __ATOMIC_RELAXED);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3vf_stop_service(struct hns3_adapter *hns)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
struct rte_eth_dev *eth_dev;
|
|
|
|
eth_dev = &rte_eth_devices[hw->data->port_id];
|
|
if (hw->adapter_state == HNS3_NIC_STARTED) {
|
|
/*
|
|
* Make sure call update link status before hns3vf_stop_poll_job
|
|
* because update link status depend on polling job exist.
|
|
*/
|
|
hns3vf_update_link_status(hw, RTE_ETH_LINK_DOWN, hw->mac.link_speed,
|
|
hw->mac.link_duplex);
|
|
hns3vf_stop_poll_job(eth_dev);
|
|
}
|
|
hw->mac.link_status = RTE_ETH_LINK_DOWN;
|
|
|
|
hns3_set_rxtx_function(eth_dev);
|
|
rte_wmb();
|
|
/* Disable datapath on secondary process. */
|
|
hns3_mp_req_stop_rxtx(eth_dev);
|
|
rte_delay_ms(hw->cfg_max_queues);
|
|
|
|
rte_spinlock_lock(&hw->lock);
|
|
if (hw->adapter_state == HNS3_NIC_STARTED ||
|
|
hw->adapter_state == HNS3_NIC_STOPPING) {
|
|
hns3_enable_all_queues(hw, false);
|
|
hns3vf_do_stop(hns);
|
|
hw->reset.mbuf_deferred_free = true;
|
|
} else
|
|
hw->reset.mbuf_deferred_free = false;
|
|
|
|
/*
|
|
* It is cumbersome for hardware to pick-and-choose entries for deletion
|
|
* from table space. Hence, for function reset software intervention is
|
|
* required to delete the entries.
|
|
*/
|
|
if (__atomic_load_n(&hw->reset.disable_cmd, __ATOMIC_RELAXED) == 0)
|
|
hns3_configure_all_mc_mac_addr(hns, true);
|
|
rte_spinlock_unlock(&hw->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3vf_start_service(struct hns3_adapter *hns)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
struct rte_eth_dev *eth_dev;
|
|
|
|
eth_dev = &rte_eth_devices[hw->data->port_id];
|
|
hns3_set_rxtx_function(eth_dev);
|
|
hns3_mp_req_start_rxtx(eth_dev);
|
|
if (hw->adapter_state == HNS3_NIC_STARTED) {
|
|
hns3vf_start_poll_job(eth_dev);
|
|
|
|
/* Enable interrupt of all rx queues before enabling queues */
|
|
hns3_dev_all_rx_queue_intr_enable(hw, true);
|
|
/*
|
|
* Enable state of each rxq and txq will be recovered after
|
|
* reset, so we need to restore them before enable all tqps;
|
|
*/
|
|
hns3_restore_tqp_enable_state(hw);
|
|
/*
|
|
* When finished the initialization, enable queues to receive
|
|
* and transmit packets.
|
|
*/
|
|
hns3_enable_all_queues(hw, true);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3vf_check_default_mac_change(struct hns3_hw *hw)
|
|
{
|
|
char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
|
|
struct rte_ether_addr *hw_mac;
|
|
int ret;
|
|
|
|
/*
|
|
* The hns3 PF ethdev driver in kernel support setting VF MAC address
|
|
* on the host by "ip link set ..." command. If the hns3 PF kernel
|
|
* ethdev driver sets the MAC address for VF device after the
|
|
* initialization of the related VF device, the PF driver will notify
|
|
* VF driver to reset VF device to make the new MAC address effective
|
|
* immediately. The hns3 VF PMD driver should check whether the MAC
|
|
* address has been changed by the PF kernel ethdev driver, if changed
|
|
* VF driver should configure hardware using the new MAC address in the
|
|
* recovering hardware configuration stage of the reset process.
|
|
*/
|
|
ret = hns3vf_get_host_mac_addr(hw);
|
|
if (ret)
|
|
return ret;
|
|
|
|
hw_mac = (struct rte_ether_addr *)hw->mac.mac_addr;
|
|
ret = rte_is_zero_ether_addr(hw_mac);
|
|
if (ret) {
|
|
rte_ether_addr_copy(&hw->data->mac_addrs[0], hw_mac);
|
|
} else {
|
|
ret = rte_is_same_ether_addr(&hw->data->mac_addrs[0], hw_mac);
|
|
if (!ret) {
|
|
rte_ether_addr_copy(hw_mac, &hw->data->mac_addrs[0]);
|
|
hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
|
|
&hw->data->mac_addrs[0]);
|
|
hns3_warn(hw, "Default MAC address has been changed to:"
|
|
" %s by the host PF kernel ethdev driver",
|
|
mac_str);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3vf_restore_conf(struct hns3_adapter *hns)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int ret;
|
|
|
|
ret = hns3vf_check_default_mac_change(hw);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = hns3_configure_all_mac_addr(hns, false);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = hns3_configure_all_mc_mac_addr(hns, false);
|
|
if (ret)
|
|
goto err_mc_mac;
|
|
|
|
ret = hns3vf_restore_promisc(hns);
|
|
if (ret)
|
|
goto err_vlan_table;
|
|
|
|
ret = hns3vf_restore_vlan_conf(hns);
|
|
if (ret)
|
|
goto err_vlan_table;
|
|
|
|
ret = hns3vf_get_port_base_vlan_filter_state(hw);
|
|
if (ret)
|
|
goto err_vlan_table;
|
|
|
|
ret = hns3vf_restore_rx_interrupt(hw);
|
|
if (ret)
|
|
goto err_vlan_table;
|
|
|
|
ret = hns3_restore_gro_conf(hw);
|
|
if (ret)
|
|
goto err_vlan_table;
|
|
|
|
if (hw->adapter_state == HNS3_NIC_STARTED) {
|
|
ret = hns3vf_do_start(hns, false);
|
|
if (ret)
|
|
goto err_vlan_table;
|
|
hns3_info(hw, "hns3vf dev restart successful!");
|
|
} else if (hw->adapter_state == HNS3_NIC_STOPPING)
|
|
hw->adapter_state = HNS3_NIC_CONFIGURED;
|
|
|
|
ret = hns3vf_set_alive(hw, true);
|
|
if (ret) {
|
|
hns3_err(hw, "failed to VF send alive to PF: %d", ret);
|
|
goto err_vlan_table;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_vlan_table:
|
|
hns3_configure_all_mc_mac_addr(hns, true);
|
|
err_mc_mac:
|
|
hns3_configure_all_mac_addr(hns, true);
|
|
return ret;
|
|
}
|
|
|
|
static enum hns3_reset_level
|
|
hns3vf_get_reset_level(struct hns3_hw *hw, uint64_t *levels)
|
|
{
|
|
enum hns3_reset_level reset_level;
|
|
|
|
/* return the highest priority reset level amongst all */
|
|
if (hns3_atomic_test_bit(HNS3_VF_RESET, levels))
|
|
reset_level = HNS3_VF_RESET;
|
|
else if (hns3_atomic_test_bit(HNS3_VF_FULL_RESET, levels))
|
|
reset_level = HNS3_VF_FULL_RESET;
|
|
else if (hns3_atomic_test_bit(HNS3_VF_PF_FUNC_RESET, levels))
|
|
reset_level = HNS3_VF_PF_FUNC_RESET;
|
|
else if (hns3_atomic_test_bit(HNS3_VF_FUNC_RESET, levels))
|
|
reset_level = HNS3_VF_FUNC_RESET;
|
|
else if (hns3_atomic_test_bit(HNS3_FLR_RESET, levels))
|
|
reset_level = HNS3_FLR_RESET;
|
|
else
|
|
reset_level = HNS3_NONE_RESET;
|
|
|
|
if (hw->reset.level != HNS3_NONE_RESET && reset_level < hw->reset.level)
|
|
return HNS3_NONE_RESET;
|
|
|
|
return reset_level;
|
|
}
|
|
|
|
static void
|
|
hns3vf_reset_service(void *param)
|
|
{
|
|
struct hns3_adapter *hns = (struct hns3_adapter *)param;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
enum hns3_reset_level reset_level;
|
|
struct timeval tv_delta;
|
|
struct timeval tv_start;
|
|
struct timeval tv;
|
|
uint64_t msec;
|
|
|
|
/*
|
|
* The interrupt is not triggered within the delay time.
|
|
* The interrupt may have been lost. It is necessary to handle
|
|
* the interrupt to recover from the error.
|
|
*/
|
|
if (__atomic_load_n(&hw->reset.schedule, __ATOMIC_RELAXED) ==
|
|
SCHEDULE_DEFERRED) {
|
|
__atomic_store_n(&hw->reset.schedule, SCHEDULE_REQUESTED,
|
|
__ATOMIC_RELAXED);
|
|
hns3_err(hw, "Handling interrupts in delayed tasks");
|
|
hns3vf_interrupt_handler(&rte_eth_devices[hw->data->port_id]);
|
|
reset_level = hns3vf_get_reset_level(hw, &hw->reset.pending);
|
|
if (reset_level == HNS3_NONE_RESET) {
|
|
hns3_err(hw, "No reset level is set, try global reset");
|
|
hns3_atomic_set_bit(HNS3_VF_RESET, &hw->reset.pending);
|
|
}
|
|
}
|
|
__atomic_store_n(&hw->reset.schedule, SCHEDULE_NONE, __ATOMIC_RELAXED);
|
|
|
|
/*
|
|
* Hardware reset has been notified, we now have to poll & check if
|
|
* hardware has actually completed the reset sequence.
|
|
*/
|
|
reset_level = hns3vf_get_reset_level(hw, &hw->reset.pending);
|
|
if (reset_level != HNS3_NONE_RESET) {
|
|
hns3_clock_gettime(&tv_start);
|
|
hns3_reset_process(hns, reset_level);
|
|
hns3_clock_gettime(&tv);
|
|
timersub(&tv, &tv_start, &tv_delta);
|
|
msec = hns3_clock_calctime_ms(&tv_delta);
|
|
if (msec > HNS3_RESET_PROCESS_MS)
|
|
hns3_err(hw, "%d handle long time delta %" PRIu64
|
|
" ms time=%ld.%.6ld",
|
|
hw->reset.level, msec, tv.tv_sec, tv.tv_usec);
|
|
}
|
|
}
|
|
|
|
static int
|
|
hns3vf_reinit_dev(struct hns3_adapter *hns)
|
|
{
|
|
struct rte_eth_dev *eth_dev = &rte_eth_devices[hns->hw.data->port_id];
|
|
struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int ret;
|
|
|
|
if (hw->reset.level == HNS3_VF_FULL_RESET) {
|
|
rte_intr_disable(pci_dev->intr_handle);
|
|
ret = hns3vf_set_bus_master(pci_dev, true);
|
|
if (ret < 0) {
|
|
hns3_err(hw, "failed to set pci bus, ret = %d", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/* Firmware command initialize */
|
|
ret = hns3_cmd_init(hw);
|
|
if (ret) {
|
|
hns3_err(hw, "Failed to init cmd: %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (hw->reset.level == HNS3_VF_FULL_RESET) {
|
|
/*
|
|
* UIO enables msix by writing the pcie configuration space
|
|
* vfio_pci enables msix in rte_intr_enable.
|
|
*/
|
|
if (pci_dev->kdrv == RTE_PCI_KDRV_IGB_UIO ||
|
|
pci_dev->kdrv == RTE_PCI_KDRV_UIO_GENERIC) {
|
|
if (hns3vf_enable_msix(pci_dev, true))
|
|
hns3_err(hw, "Failed to enable msix");
|
|
}
|
|
|
|
rte_intr_enable(pci_dev->intr_handle);
|
|
}
|
|
|
|
ret = hns3_reset_all_tqps(hns);
|
|
if (ret) {
|
|
hns3_err(hw, "Failed to reset all queues: %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = hns3vf_init_hardware(hns);
|
|
if (ret) {
|
|
hns3_err(hw, "Failed to init hardware: %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct eth_dev_ops hns3vf_eth_dev_ops = {
|
|
.dev_configure = hns3vf_dev_configure,
|
|
.dev_start = hns3vf_dev_start,
|
|
.dev_stop = hns3vf_dev_stop,
|
|
.dev_close = hns3vf_dev_close,
|
|
.mtu_set = hns3vf_dev_mtu_set,
|
|
.promiscuous_enable = hns3vf_dev_promiscuous_enable,
|
|
.promiscuous_disable = hns3vf_dev_promiscuous_disable,
|
|
.allmulticast_enable = hns3vf_dev_allmulticast_enable,
|
|
.allmulticast_disable = hns3vf_dev_allmulticast_disable,
|
|
.stats_get = hns3_stats_get,
|
|
.stats_reset = hns3_stats_reset,
|
|
.xstats_get = hns3_dev_xstats_get,
|
|
.xstats_get_names = hns3_dev_xstats_get_names,
|
|
.xstats_reset = hns3_dev_xstats_reset,
|
|
.xstats_get_by_id = hns3_dev_xstats_get_by_id,
|
|
.xstats_get_names_by_id = hns3_dev_xstats_get_names_by_id,
|
|
.dev_infos_get = hns3vf_dev_infos_get,
|
|
.fw_version_get = hns3vf_fw_version_get,
|
|
.rx_queue_setup = hns3_rx_queue_setup,
|
|
.tx_queue_setup = hns3_tx_queue_setup,
|
|
.rx_queue_release = hns3_dev_rx_queue_release,
|
|
.tx_queue_release = hns3_dev_tx_queue_release,
|
|
.rx_queue_start = hns3_dev_rx_queue_start,
|
|
.rx_queue_stop = hns3_dev_rx_queue_stop,
|
|
.tx_queue_start = hns3_dev_tx_queue_start,
|
|
.tx_queue_stop = hns3_dev_tx_queue_stop,
|
|
.rx_queue_intr_enable = hns3_dev_rx_queue_intr_enable,
|
|
.rx_queue_intr_disable = hns3_dev_rx_queue_intr_disable,
|
|
.rxq_info_get = hns3_rxq_info_get,
|
|
.txq_info_get = hns3_txq_info_get,
|
|
.rx_burst_mode_get = hns3_rx_burst_mode_get,
|
|
.tx_burst_mode_get = hns3_tx_burst_mode_get,
|
|
.mac_addr_add = hns3_add_mac_addr,
|
|
.mac_addr_remove = hns3_remove_mac_addr,
|
|
.mac_addr_set = hns3vf_set_default_mac_addr,
|
|
.set_mc_addr_list = hns3_set_mc_mac_addr_list,
|
|
.link_update = hns3vf_dev_link_update,
|
|
.rss_hash_update = hns3_dev_rss_hash_update,
|
|
.rss_hash_conf_get = hns3_dev_rss_hash_conf_get,
|
|
.reta_update = hns3_dev_rss_reta_update,
|
|
.reta_query = hns3_dev_rss_reta_query,
|
|
.flow_ops_get = hns3_dev_flow_ops_get,
|
|
.vlan_filter_set = hns3vf_vlan_filter_set,
|
|
.vlan_offload_set = hns3vf_vlan_offload_set,
|
|
.get_reg = hns3_get_regs,
|
|
.dev_supported_ptypes_get = hns3_dev_supported_ptypes_get,
|
|
.tx_done_cleanup = hns3_tx_done_cleanup,
|
|
};
|
|
|
|
static const struct hns3_reset_ops hns3vf_reset_ops = {
|
|
.reset_service = hns3vf_reset_service,
|
|
.stop_service = hns3vf_stop_service,
|
|
.prepare_reset = hns3vf_prepare_reset,
|
|
.wait_hardware_ready = hns3vf_wait_hardware_ready,
|
|
.reinit_dev = hns3vf_reinit_dev,
|
|
.restore_conf = hns3vf_restore_conf,
|
|
.start_service = hns3vf_start_service,
|
|
};
|
|
|
|
static void
|
|
hns3vf_init_hw_ops(struct hns3_hw *hw)
|
|
{
|
|
hw->ops.add_mc_mac_addr = hns3vf_add_mc_mac_addr;
|
|
hw->ops.del_mc_mac_addr = hns3vf_remove_mc_mac_addr;
|
|
hw->ops.add_uc_mac_addr = hns3vf_add_uc_mac_addr;
|
|
hw->ops.del_uc_mac_addr = hns3vf_remove_uc_mac_addr;
|
|
}
|
|
|
|
static int
|
|
hns3vf_dev_init(struct rte_eth_dev *eth_dev)
|
|
{
|
|
struct hns3_adapter *hns = eth_dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int ret;
|
|
|
|
PMD_INIT_FUNC_TRACE();
|
|
|
|
hns3_flow_init(eth_dev);
|
|
|
|
hns3_set_rxtx_function(eth_dev);
|
|
eth_dev->dev_ops = &hns3vf_eth_dev_ops;
|
|
eth_dev->rx_queue_count = hns3_rx_queue_count;
|
|
ret = hns3_mp_init(eth_dev);
|
|
if (ret)
|
|
goto err_mp_init;
|
|
|
|
if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
|
|
hns3_tx_push_init(eth_dev);
|
|
return 0;
|
|
}
|
|
|
|
hw->adapter_state = HNS3_NIC_UNINITIALIZED;
|
|
hns->is_vf = true;
|
|
hw->data = eth_dev->data;
|
|
hns3_parse_devargs(eth_dev);
|
|
|
|
ret = hns3_reset_init(hw);
|
|
if (ret)
|
|
goto err_init_reset;
|
|
hw->reset.ops = &hns3vf_reset_ops;
|
|
|
|
hns3vf_init_hw_ops(hw);
|
|
ret = hns3vf_init_vf(eth_dev);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "Failed to init vf: %d", ret);
|
|
goto err_init_vf;
|
|
}
|
|
|
|
/* Allocate memory for storing MAC addresses */
|
|
eth_dev->data->mac_addrs = rte_zmalloc("hns3vf-mac",
|
|
sizeof(struct rte_ether_addr) *
|
|
HNS3_VF_UC_MACADDR_NUM, 0);
|
|
if (eth_dev->data->mac_addrs == NULL) {
|
|
PMD_INIT_LOG(ERR, "Failed to allocate %zx bytes needed "
|
|
"to store MAC addresses",
|
|
sizeof(struct rte_ether_addr) *
|
|
HNS3_VF_UC_MACADDR_NUM);
|
|
ret = -ENOMEM;
|
|
goto err_rte_zmalloc;
|
|
}
|
|
|
|
/*
|
|
* The hns3 PF ethdev driver in kernel support setting VF MAC address
|
|
* on the host by "ip link set ..." command. To avoid some incorrect
|
|
* scenes, for example, hns3 VF PMD driver fails to receive and send
|
|
* packets after user configure the MAC address by using the
|
|
* "ip link set ..." command, hns3 VF PMD driver keep the same MAC
|
|
* address strategy as the hns3 kernel ethdev driver in the
|
|
* initialization. If user configure a MAC address by the ip command
|
|
* for VF device, then hns3 VF PMD driver will start with it, otherwise
|
|
* start with a random MAC address in the initialization.
|
|
*/
|
|
if (rte_is_zero_ether_addr((struct rte_ether_addr *)hw->mac.mac_addr))
|
|
rte_eth_random_addr(hw->mac.mac_addr);
|
|
rte_ether_addr_copy((struct rte_ether_addr *)hw->mac.mac_addr,
|
|
ð_dev->data->mac_addrs[0]);
|
|
|
|
hw->adapter_state = HNS3_NIC_INITIALIZED;
|
|
|
|
if (__atomic_load_n(&hw->reset.schedule, __ATOMIC_RELAXED) ==
|
|
SCHEDULE_PENDING) {
|
|
hns3_err(hw, "Reschedule reset service after dev_init");
|
|
hns3_schedule_reset(hns);
|
|
} else {
|
|
/* IMP will wait ready flag before reset */
|
|
hns3_notify_reset_ready(hw, false);
|
|
}
|
|
rte_eal_alarm_set(HNS3VF_KEEP_ALIVE_INTERVAL, hns3vf_keep_alive_handler,
|
|
eth_dev);
|
|
return 0;
|
|
|
|
err_rte_zmalloc:
|
|
hns3vf_uninit_vf(eth_dev);
|
|
|
|
err_init_vf:
|
|
rte_free(hw->reset.wait_data);
|
|
|
|
err_init_reset:
|
|
hns3_mp_uninit(eth_dev);
|
|
|
|
err_mp_init:
|
|
eth_dev->dev_ops = NULL;
|
|
eth_dev->rx_pkt_burst = NULL;
|
|
eth_dev->rx_descriptor_status = NULL;
|
|
eth_dev->tx_pkt_burst = NULL;
|
|
eth_dev->tx_pkt_prepare = NULL;
|
|
eth_dev->tx_descriptor_status = NULL;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3vf_dev_uninit(struct rte_eth_dev *eth_dev)
|
|
{
|
|
struct hns3_adapter *hns = eth_dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
|
|
PMD_INIT_FUNC_TRACE();
|
|
|
|
if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
|
|
__atomic_fetch_sub(&hw->secondary_cnt, 1, __ATOMIC_RELAXED);
|
|
hns3_mp_uninit(eth_dev);
|
|
return 0;
|
|
}
|
|
|
|
if (hw->adapter_state < HNS3_NIC_CLOSING)
|
|
hns3vf_dev_close(eth_dev);
|
|
|
|
hw->adapter_state = HNS3_NIC_REMOVED;
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
eth_hns3vf_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
|
|
struct rte_pci_device *pci_dev)
|
|
{
|
|
return rte_eth_dev_pci_generic_probe(pci_dev,
|
|
sizeof(struct hns3_adapter),
|
|
hns3vf_dev_init);
|
|
}
|
|
|
|
static int
|
|
eth_hns3vf_pci_remove(struct rte_pci_device *pci_dev)
|
|
{
|
|
return rte_eth_dev_pci_generic_remove(pci_dev, hns3vf_dev_uninit);
|
|
}
|
|
|
|
static const struct rte_pci_id pci_id_hns3vf_map[] = {
|
|
{ RTE_PCI_DEVICE(PCI_VENDOR_ID_HUAWEI, HNS3_DEV_ID_100G_VF) },
|
|
{ RTE_PCI_DEVICE(PCI_VENDOR_ID_HUAWEI, HNS3_DEV_ID_100G_RDMA_PFC_VF) },
|
|
{ .vendor_id = 0, }, /* sentinel */
|
|
};
|
|
|
|
static struct rte_pci_driver rte_hns3vf_pmd = {
|
|
.id_table = pci_id_hns3vf_map,
|
|
.drv_flags = RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_INTR_LSC,
|
|
.probe = eth_hns3vf_pci_probe,
|
|
.remove = eth_hns3vf_pci_remove,
|
|
};
|
|
|
|
RTE_PMD_REGISTER_PCI(net_hns3_vf, rte_hns3vf_pmd);
|
|
RTE_PMD_REGISTER_PCI_TABLE(net_hns3_vf, pci_id_hns3vf_map);
|
|
RTE_PMD_REGISTER_KMOD_DEP(net_hns3_vf, "* igb_uio | vfio-pci");
|
|
RTE_PMD_REGISTER_PARAM_STRING(net_hns3_vf,
|
|
HNS3_DEVARG_RX_FUNC_HINT "=vec|sve|simple|common "
|
|
HNS3_DEVARG_TX_FUNC_HINT "=vec|sve|simple|common "
|
|
HNS3_DEVARG_DEV_CAPS_MASK "=<1-65535> "
|
|
HNS3_DEVARG_MBX_TIME_LIMIT_MS "=<uint16_t> ");
|