0ec753e6e0
This patch bumps bnx2x PMD version to 1.0.5.1 to track the recent fixes to the driver. Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
11808 lines
311 KiB
C
11808 lines
311 KiB
C
/*-
|
|
* Copyright (c) 2007-2013 Broadcom Corporation.
|
|
*
|
|
* Eric Davis <edavis@broadcom.com>
|
|
* David Christensen <davidch@broadcom.com>
|
|
* Gary Zambrano <zambrano@broadcom.com>
|
|
*
|
|
* Copyright (c) 2013-2015 Brocade Communications Systems, Inc.
|
|
* Copyright (c) 2015 QLogic Corporation.
|
|
* All rights reserved.
|
|
* www.qlogic.com
|
|
*
|
|
* See LICENSE.bnx2x_pmd for copyright and licensing details.
|
|
*/
|
|
|
|
#define BNX2X_DRIVER_VERSION "1.78.18"
|
|
|
|
#include "bnx2x.h"
|
|
#include "bnx2x_vfpf.h"
|
|
#include "ecore_sp.h"
|
|
#include "ecore_init.h"
|
|
#include "ecore_init_ops.h"
|
|
|
|
#include "rte_version.h"
|
|
|
|
#include <sys/types.h>
|
|
#include <sys/stat.h>
|
|
#include <fcntl.h>
|
|
#include <zlib.h>
|
|
|
|
#define BNX2X_PMD_VER_PREFIX "BNX2X PMD"
|
|
#define BNX2X_PMD_VERSION_MAJOR 1
|
|
#define BNX2X_PMD_VERSION_MINOR 0
|
|
#define BNX2X_PMD_VERSION_REVISION 5
|
|
#define BNX2X_PMD_VERSION_PATCH 1
|
|
|
|
static inline const char *
|
|
bnx2x_pmd_version(void)
|
|
{
|
|
static char version[32];
|
|
|
|
snprintf(version, sizeof(version), "%s %s_%d.%d.%d.%d",
|
|
BNX2X_PMD_VER_PREFIX,
|
|
BNX2X_DRIVER_VERSION,
|
|
BNX2X_PMD_VERSION_MAJOR,
|
|
BNX2X_PMD_VERSION_MINOR,
|
|
BNX2X_PMD_VERSION_REVISION,
|
|
BNX2X_PMD_VERSION_PATCH);
|
|
|
|
return version;
|
|
}
|
|
|
|
static z_stream zlib_stream;
|
|
|
|
#define EVL_VLID_MASK 0x0FFF
|
|
|
|
#define BNX2X_DEF_SB_ATT_IDX 0x0001
|
|
#define BNX2X_DEF_SB_IDX 0x0002
|
|
|
|
/*
|
|
* FLR Support - bnx2x_pf_flr_clnup() is called during nic_load in the per
|
|
* function HW initialization.
|
|
*/
|
|
#define FLR_WAIT_USEC 10000 /* 10 msecs */
|
|
#define FLR_WAIT_INTERVAL 50 /* usecs */
|
|
#define FLR_POLL_CNT (FLR_WAIT_USEC / FLR_WAIT_INTERVAL) /* 200 */
|
|
|
|
struct pbf_pN_buf_regs {
|
|
int pN;
|
|
uint32_t init_crd;
|
|
uint32_t crd;
|
|
uint32_t crd_freed;
|
|
};
|
|
|
|
struct pbf_pN_cmd_regs {
|
|
int pN;
|
|
uint32_t lines_occup;
|
|
uint32_t lines_freed;
|
|
};
|
|
|
|
/* resources needed for unloading a previously loaded device */
|
|
|
|
#define BNX2X_PREV_WAIT_NEEDED 1
|
|
rte_spinlock_t bnx2x_prev_mtx;
|
|
struct bnx2x_prev_list_node {
|
|
LIST_ENTRY(bnx2x_prev_list_node) node;
|
|
uint8_t bus;
|
|
uint8_t slot;
|
|
uint8_t path;
|
|
uint8_t aer;
|
|
uint8_t undi;
|
|
};
|
|
|
|
static LIST_HEAD(, bnx2x_prev_list_node) bnx2x_prev_list
|
|
= LIST_HEAD_INITIALIZER(bnx2x_prev_list);
|
|
|
|
static int load_count[2][3] = { { 0 } };
|
|
/* per-path: 0-common, 1-port0, 2-port1 */
|
|
|
|
static void bnx2x_cmng_fns_init(struct bnx2x_softc *sc, uint8_t read_cfg,
|
|
uint8_t cmng_type);
|
|
static int bnx2x_get_cmng_fns_mode(struct bnx2x_softc *sc);
|
|
static void storm_memset_cmng(struct bnx2x_softc *sc, struct cmng_init *cmng,
|
|
uint8_t port);
|
|
static void bnx2x_set_reset_global(struct bnx2x_softc *sc);
|
|
static void bnx2x_set_reset_in_progress(struct bnx2x_softc *sc);
|
|
static uint8_t bnx2x_reset_is_done(struct bnx2x_softc *sc, int engine);
|
|
static uint8_t bnx2x_clear_pf_load(struct bnx2x_softc *sc);
|
|
static uint8_t bnx2x_chk_parity_attn(struct bnx2x_softc *sc, uint8_t * global,
|
|
uint8_t print);
|
|
static void bnx2x_int_disable(struct bnx2x_softc *sc);
|
|
static int bnx2x_release_leader_lock(struct bnx2x_softc *sc);
|
|
static void bnx2x_pf_disable(struct bnx2x_softc *sc);
|
|
static void bnx2x_update_rx_prod(struct bnx2x_softc *sc,
|
|
struct bnx2x_fastpath *fp,
|
|
uint16_t rx_bd_prod, uint16_t rx_cq_prod);
|
|
static void bnx2x_link_report(struct bnx2x_softc *sc);
|
|
void bnx2x_link_status_update(struct bnx2x_softc *sc);
|
|
static int bnx2x_alloc_mem(struct bnx2x_softc *sc);
|
|
static void bnx2x_free_mem(struct bnx2x_softc *sc);
|
|
static int bnx2x_alloc_fw_stats_mem(struct bnx2x_softc *sc);
|
|
static void bnx2x_free_fw_stats_mem(struct bnx2x_softc *sc);
|
|
static __attribute__ ((noinline))
|
|
int bnx2x_nic_load(struct bnx2x_softc *sc);
|
|
|
|
static int bnx2x_handle_sp_tq(struct bnx2x_softc *sc);
|
|
static void bnx2x_handle_fp_tq(struct bnx2x_fastpath *fp, int scan_fp);
|
|
static void bnx2x_periodic_stop(struct bnx2x_softc *sc);
|
|
static void bnx2x_ack_sb(struct bnx2x_softc *sc, uint8_t igu_sb_id,
|
|
uint8_t storm, uint16_t index, uint8_t op,
|
|
uint8_t update);
|
|
|
|
int bnx2x_test_bit(int nr, volatile unsigned long *addr)
|
|
{
|
|
int res;
|
|
|
|
mb();
|
|
res = ((*addr) & (1UL << nr)) != 0;
|
|
mb();
|
|
return res;
|
|
}
|
|
|
|
void bnx2x_set_bit(unsigned int nr, volatile unsigned long *addr)
|
|
{
|
|
__sync_fetch_and_or(addr, (1UL << nr));
|
|
}
|
|
|
|
void bnx2x_clear_bit(int nr, volatile unsigned long *addr)
|
|
{
|
|
__sync_fetch_and_and(addr, ~(1UL << nr));
|
|
}
|
|
|
|
int bnx2x_test_and_clear_bit(int nr, volatile unsigned long *addr)
|
|
{
|
|
unsigned long mask = (1UL << nr);
|
|
return __sync_fetch_and_and(addr, ~mask) & mask;
|
|
}
|
|
|
|
int bnx2x_cmpxchg(volatile int *addr, int old, int new)
|
|
{
|
|
return __sync_val_compare_and_swap(addr, old, new);
|
|
}
|
|
|
|
int
|
|
bnx2x_dma_alloc(struct bnx2x_softc *sc, size_t size, struct bnx2x_dma *dma,
|
|
const char *msg, uint32_t align)
|
|
{
|
|
char mz_name[RTE_MEMZONE_NAMESIZE];
|
|
const struct rte_memzone *z;
|
|
|
|
dma->sc = sc;
|
|
if (IS_PF(sc))
|
|
sprintf(mz_name, "bnx2x%d_%s_%" PRIx64, SC_ABS_FUNC(sc), msg,
|
|
rte_get_timer_cycles());
|
|
else
|
|
sprintf(mz_name, "bnx2x%d_%s_%" PRIx64, sc->pcie_device, msg,
|
|
rte_get_timer_cycles());
|
|
|
|
/* Caller must take care that strlen(mz_name) < RTE_MEMZONE_NAMESIZE */
|
|
z = rte_memzone_reserve_aligned(mz_name, (uint64_t) (size),
|
|
SOCKET_ID_ANY,
|
|
0, align);
|
|
if (z == NULL) {
|
|
PMD_DRV_LOG(ERR, "DMA alloc failed for %s", msg);
|
|
return -ENOMEM;
|
|
}
|
|
dma->paddr = (uint64_t) z->phys_addr;
|
|
dma->vaddr = z->addr;
|
|
|
|
PMD_DRV_LOG(DEBUG, "%s: virt=%p phys=%" PRIx64, msg, dma->vaddr, dma->paddr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_acquire_hw_lock(struct bnx2x_softc *sc, uint32_t resource)
|
|
{
|
|
uint32_t lock_status;
|
|
uint32_t resource_bit = (1 << resource);
|
|
int func = SC_FUNC(sc);
|
|
uint32_t hw_lock_control_reg;
|
|
int cnt;
|
|
|
|
PMD_INIT_FUNC_TRACE();
|
|
|
|
/* validate the resource is within range */
|
|
if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
|
|
PMD_DRV_LOG(NOTICE,
|
|
"resource 0x%x > HW_LOCK_MAX_RESOURCE_VALUE",
|
|
resource);
|
|
return -1;
|
|
}
|
|
|
|
if (func <= 5) {
|
|
hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + (func * 8));
|
|
} else {
|
|
hw_lock_control_reg =
|
|
(MISC_REG_DRIVER_CONTROL_7 + ((func - 6) * 8));
|
|
}
|
|
|
|
/* validate the resource is not already taken */
|
|
lock_status = REG_RD(sc, hw_lock_control_reg);
|
|
if (lock_status & resource_bit) {
|
|
PMD_DRV_LOG(NOTICE,
|
|
"resource in use (status 0x%x bit 0x%x)",
|
|
lock_status, resource_bit);
|
|
return -1;
|
|
}
|
|
|
|
/* try every 5ms for 5 seconds */
|
|
for (cnt = 0; cnt < 1000; cnt++) {
|
|
REG_WR(sc, (hw_lock_control_reg + 4), resource_bit);
|
|
lock_status = REG_RD(sc, hw_lock_control_reg);
|
|
if (lock_status & resource_bit) {
|
|
return 0;
|
|
}
|
|
DELAY(5000);
|
|
}
|
|
|
|
PMD_DRV_LOG(NOTICE, "Resource lock timeout!");
|
|
return -1;
|
|
}
|
|
|
|
static int bnx2x_release_hw_lock(struct bnx2x_softc *sc, uint32_t resource)
|
|
{
|
|
uint32_t lock_status;
|
|
uint32_t resource_bit = (1 << resource);
|
|
int func = SC_FUNC(sc);
|
|
uint32_t hw_lock_control_reg;
|
|
|
|
PMD_INIT_FUNC_TRACE();
|
|
|
|
/* validate the resource is within range */
|
|
if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
|
|
PMD_DRV_LOG(NOTICE,
|
|
"resource 0x%x > HW_LOCK_MAX_RESOURCE_VALUE",
|
|
resource);
|
|
return -1;
|
|
}
|
|
|
|
if (func <= 5) {
|
|
hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + (func * 8));
|
|
} else {
|
|
hw_lock_control_reg =
|
|
(MISC_REG_DRIVER_CONTROL_7 + ((func - 6) * 8));
|
|
}
|
|
|
|
/* validate the resource is currently taken */
|
|
lock_status = REG_RD(sc, hw_lock_control_reg);
|
|
if (!(lock_status & resource_bit)) {
|
|
PMD_DRV_LOG(NOTICE,
|
|
"resource not in use (status 0x%x bit 0x%x)",
|
|
lock_status, resource_bit);
|
|
return -1;
|
|
}
|
|
|
|
REG_WR(sc, hw_lock_control_reg, resource_bit);
|
|
return 0;
|
|
}
|
|
|
|
/* copy command into DMAE command memory and set DMAE command Go */
|
|
void bnx2x_post_dmae(struct bnx2x_softc *sc, struct dmae_command *dmae, int idx)
|
|
{
|
|
uint32_t cmd_offset;
|
|
uint32_t i;
|
|
|
|
cmd_offset = (DMAE_REG_CMD_MEM + (sizeof(struct dmae_command) * idx));
|
|
for (i = 0; i < ((sizeof(struct dmae_command) / 4)); i++) {
|
|
REG_WR(sc, (cmd_offset + (i * 4)), *(((uint32_t *) dmae) + i));
|
|
}
|
|
|
|
REG_WR(sc, dmae_reg_go_c[idx], 1);
|
|
}
|
|
|
|
uint32_t bnx2x_dmae_opcode_add_comp(uint32_t opcode, uint8_t comp_type)
|
|
{
|
|
return opcode | ((comp_type << DMAE_COMMAND_C_DST_SHIFT) |
|
|
DMAE_COMMAND_C_TYPE_ENABLE);
|
|
}
|
|
|
|
uint32_t bnx2x_dmae_opcode_clr_src_reset(uint32_t opcode)
|
|
{
|
|
return opcode & ~DMAE_COMMAND_SRC_RESET;
|
|
}
|
|
|
|
uint32_t
|
|
bnx2x_dmae_opcode(struct bnx2x_softc * sc, uint8_t src_type, uint8_t dst_type,
|
|
uint8_t with_comp, uint8_t comp_type)
|
|
{
|
|
uint32_t opcode = 0;
|
|
|
|
opcode |= ((src_type << DMAE_COMMAND_SRC_SHIFT) |
|
|
(dst_type << DMAE_COMMAND_DST_SHIFT));
|
|
|
|
opcode |= (DMAE_COMMAND_SRC_RESET | DMAE_COMMAND_DST_RESET);
|
|
|
|
opcode |= (SC_PORT(sc) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0);
|
|
|
|
opcode |= ((SC_VN(sc) << DMAE_COMMAND_E1HVN_SHIFT) |
|
|
(SC_VN(sc) << DMAE_COMMAND_DST_VN_SHIFT));
|
|
|
|
opcode |= (DMAE_COM_SET_ERR << DMAE_COMMAND_ERR_POLICY_SHIFT);
|
|
|
|
#ifdef __BIG_ENDIAN
|
|
opcode |= DMAE_CMD_ENDIANITY_B_DW_SWAP;
|
|
#else
|
|
opcode |= DMAE_CMD_ENDIANITY_DW_SWAP;
|
|
#endif
|
|
|
|
if (with_comp) {
|
|
opcode = bnx2x_dmae_opcode_add_comp(opcode, comp_type);
|
|
}
|
|
|
|
return opcode;
|
|
}
|
|
|
|
static void
|
|
bnx2x_prep_dmae_with_comp(struct bnx2x_softc *sc, struct dmae_command *dmae,
|
|
uint8_t src_type, uint8_t dst_type)
|
|
{
|
|
memset(dmae, 0, sizeof(struct dmae_command));
|
|
|
|
/* set the opcode */
|
|
dmae->opcode = bnx2x_dmae_opcode(sc, src_type, dst_type,
|
|
TRUE, DMAE_COMP_PCI);
|
|
|
|
/* fill in the completion parameters */
|
|
dmae->comp_addr_lo = U64_LO(BNX2X_SP_MAPPING(sc, wb_comp));
|
|
dmae->comp_addr_hi = U64_HI(BNX2X_SP_MAPPING(sc, wb_comp));
|
|
dmae->comp_val = DMAE_COMP_VAL;
|
|
}
|
|
|
|
/* issue a DMAE command over the init channel and wait for completion */
|
|
static int
|
|
bnx2x_issue_dmae_with_comp(struct bnx2x_softc *sc, struct dmae_command *dmae)
|
|
{
|
|
uint32_t *wb_comp = BNX2X_SP(sc, wb_comp);
|
|
int timeout = CHIP_REV_IS_SLOW(sc) ? 400000 : 4000;
|
|
|
|
/* reset completion */
|
|
*wb_comp = 0;
|
|
|
|
/* post the command on the channel used for initializations */
|
|
bnx2x_post_dmae(sc, dmae, INIT_DMAE_C(sc));
|
|
|
|
/* wait for completion */
|
|
DELAY(500);
|
|
|
|
while ((*wb_comp & ~DMAE_PCI_ERR_FLAG) != DMAE_COMP_VAL) {
|
|
if (!timeout ||
|
|
(sc->recovery_state != BNX2X_RECOVERY_DONE &&
|
|
sc->recovery_state != BNX2X_RECOVERY_NIC_LOADING)) {
|
|
PMD_DRV_LOG(INFO, "DMAE timeout!");
|
|
return DMAE_TIMEOUT;
|
|
}
|
|
|
|
timeout--;
|
|
DELAY(50);
|
|
}
|
|
|
|
if (*wb_comp & DMAE_PCI_ERR_FLAG) {
|
|
PMD_DRV_LOG(INFO, "DMAE PCI error!");
|
|
return DMAE_PCI_ERROR;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void bnx2x_read_dmae(struct bnx2x_softc *sc, uint32_t src_addr, uint32_t len32)
|
|
{
|
|
struct dmae_command dmae;
|
|
uint32_t *data;
|
|
uint32_t i;
|
|
int rc;
|
|
|
|
if (!sc->dmae_ready) {
|
|
data = BNX2X_SP(sc, wb_data[0]);
|
|
|
|
for (i = 0; i < len32; i++) {
|
|
data[i] = REG_RD(sc, (src_addr + (i * 4)));
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/* set opcode and fixed command fields */
|
|
bnx2x_prep_dmae_with_comp(sc, &dmae, DMAE_SRC_GRC, DMAE_DST_PCI);
|
|
|
|
/* fill in addresses and len */
|
|
dmae.src_addr_lo = (src_addr >> 2); /* GRC addr has dword resolution */
|
|
dmae.src_addr_hi = 0;
|
|
dmae.dst_addr_lo = U64_LO(BNX2X_SP_MAPPING(sc, wb_data));
|
|
dmae.dst_addr_hi = U64_HI(BNX2X_SP_MAPPING(sc, wb_data));
|
|
dmae.len = len32;
|
|
|
|
/* issue the command and wait for completion */
|
|
if ((rc = bnx2x_issue_dmae_with_comp(sc, &dmae)) != 0) {
|
|
rte_panic("DMAE failed (%d)", rc);
|
|
};
|
|
}
|
|
|
|
void
|
|
bnx2x_write_dmae(struct bnx2x_softc *sc, phys_addr_t dma_addr, uint32_t dst_addr,
|
|
uint32_t len32)
|
|
{
|
|
struct dmae_command dmae;
|
|
int rc;
|
|
|
|
if (!sc->dmae_ready) {
|
|
ecore_init_str_wr(sc, dst_addr, BNX2X_SP(sc, wb_data[0]), len32);
|
|
return;
|
|
}
|
|
|
|
/* set opcode and fixed command fields */
|
|
bnx2x_prep_dmae_with_comp(sc, &dmae, DMAE_SRC_PCI, DMAE_DST_GRC);
|
|
|
|
/* fill in addresses and len */
|
|
dmae.src_addr_lo = U64_LO(dma_addr);
|
|
dmae.src_addr_hi = U64_HI(dma_addr);
|
|
dmae.dst_addr_lo = (dst_addr >> 2); /* GRC addr has dword resolution */
|
|
dmae.dst_addr_hi = 0;
|
|
dmae.len = len32;
|
|
|
|
/* issue the command and wait for completion */
|
|
if ((rc = bnx2x_issue_dmae_with_comp(sc, &dmae)) != 0) {
|
|
rte_panic("DMAE failed (%d)", rc);
|
|
}
|
|
}
|
|
|
|
static void
|
|
bnx2x_write_dmae_phys_len(struct bnx2x_softc *sc, phys_addr_t phys_addr,
|
|
uint32_t addr, uint32_t len)
|
|
{
|
|
uint32_t dmae_wr_max = DMAE_LEN32_WR_MAX(sc);
|
|
uint32_t offset = 0;
|
|
|
|
while (len > dmae_wr_max) {
|
|
bnx2x_write_dmae(sc, (phys_addr + offset), /* src DMA address */
|
|
(addr + offset), /* dst GRC address */
|
|
dmae_wr_max);
|
|
offset += (dmae_wr_max * 4);
|
|
len -= dmae_wr_max;
|
|
}
|
|
|
|
bnx2x_write_dmae(sc, (phys_addr + offset), /* src DMA address */
|
|
(addr + offset), /* dst GRC address */
|
|
len);
|
|
}
|
|
|
|
void
|
|
bnx2x_set_ctx_validation(struct bnx2x_softc *sc, struct eth_context *cxt,
|
|
uint32_t cid)
|
|
{
|
|
/* ustorm cxt validation */
|
|
cxt->ustorm_ag_context.cdu_usage =
|
|
CDU_RSRVD_VALUE_TYPE_A(HW_CID(sc, cid),
|
|
CDU_REGION_NUMBER_UCM_AG,
|
|
ETH_CONNECTION_TYPE);
|
|
/* xcontext validation */
|
|
cxt->xstorm_ag_context.cdu_reserved =
|
|
CDU_RSRVD_VALUE_TYPE_A(HW_CID(sc, cid),
|
|
CDU_REGION_NUMBER_XCM_AG,
|
|
ETH_CONNECTION_TYPE);
|
|
}
|
|
|
|
static void
|
|
bnx2x_storm_memset_hc_timeout(struct bnx2x_softc *sc, uint8_t fw_sb_id,
|
|
uint8_t sb_index, uint8_t ticks)
|
|
{
|
|
uint32_t addr =
|
|
(BAR_CSTRORM_INTMEM +
|
|
CSTORM_STATUS_BLOCK_DATA_TIMEOUT_OFFSET(fw_sb_id, sb_index));
|
|
|
|
REG_WR8(sc, addr, ticks);
|
|
}
|
|
|
|
static void
|
|
bnx2x_storm_memset_hc_disable(struct bnx2x_softc *sc, uint16_t fw_sb_id,
|
|
uint8_t sb_index, uint8_t disable)
|
|
{
|
|
uint32_t enable_flag =
|
|
(disable) ? 0 : (1 << HC_INDEX_DATA_HC_ENABLED_SHIFT);
|
|
uint32_t addr =
|
|
(BAR_CSTRORM_INTMEM +
|
|
CSTORM_STATUS_BLOCK_DATA_FLAGS_OFFSET(fw_sb_id, sb_index));
|
|
uint8_t flags;
|
|
|
|
/* clear and set */
|
|
flags = REG_RD8(sc, addr);
|
|
flags &= ~HC_INDEX_DATA_HC_ENABLED;
|
|
flags |= enable_flag;
|
|
REG_WR8(sc, addr, flags);
|
|
}
|
|
|
|
void
|
|
bnx2x_update_coalesce_sb_index(struct bnx2x_softc *sc, uint8_t fw_sb_id,
|
|
uint8_t sb_index, uint8_t disable, uint16_t usec)
|
|
{
|
|
uint8_t ticks = (usec / 4);
|
|
|
|
bnx2x_storm_memset_hc_timeout(sc, fw_sb_id, sb_index, ticks);
|
|
|
|
disable = (disable) ? 1 : ((usec) ? 0 : 1);
|
|
bnx2x_storm_memset_hc_disable(sc, fw_sb_id, sb_index, disable);
|
|
}
|
|
|
|
uint32_t elink_cb_reg_read(struct bnx2x_softc *sc, uint32_t reg_addr)
|
|
{
|
|
return REG_RD(sc, reg_addr);
|
|
}
|
|
|
|
void elink_cb_reg_write(struct bnx2x_softc *sc, uint32_t reg_addr, uint32_t val)
|
|
{
|
|
REG_WR(sc, reg_addr, val);
|
|
}
|
|
|
|
void
|
|
elink_cb_event_log(__rte_unused struct bnx2x_softc *sc,
|
|
__rte_unused const elink_log_id_t elink_log_id, ...)
|
|
{
|
|
PMD_DRV_LOG(DEBUG, "ELINK EVENT LOG (%d)", elink_log_id);
|
|
}
|
|
|
|
static int bnx2x_set_spio(struct bnx2x_softc *sc, int spio, uint32_t mode)
|
|
{
|
|
uint32_t spio_reg;
|
|
|
|
/* Only 2 SPIOs are configurable */
|
|
if ((spio != MISC_SPIO_SPIO4) && (spio != MISC_SPIO_SPIO5)) {
|
|
PMD_DRV_LOG(NOTICE, "Invalid SPIO 0x%x", spio);
|
|
return -1;
|
|
}
|
|
|
|
bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_SPIO);
|
|
|
|
/* read SPIO and mask except the float bits */
|
|
spio_reg = (REG_RD(sc, MISC_REG_SPIO) & MISC_SPIO_FLOAT);
|
|
|
|
switch (mode) {
|
|
case MISC_SPIO_OUTPUT_LOW:
|
|
/* clear FLOAT and set CLR */
|
|
spio_reg &= ~(spio << MISC_SPIO_FLOAT_POS);
|
|
spio_reg |= (spio << MISC_SPIO_CLR_POS);
|
|
break;
|
|
|
|
case MISC_SPIO_OUTPUT_HIGH:
|
|
/* clear FLOAT and set SET */
|
|
spio_reg &= ~(spio << MISC_SPIO_FLOAT_POS);
|
|
spio_reg |= (spio << MISC_SPIO_SET_POS);
|
|
break;
|
|
|
|
case MISC_SPIO_INPUT_HI_Z:
|
|
/* set FLOAT */
|
|
spio_reg |= (spio << MISC_SPIO_FLOAT_POS);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
REG_WR(sc, MISC_REG_SPIO, spio_reg);
|
|
bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_SPIO);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_gpio_read(struct bnx2x_softc *sc, int gpio_num, uint8_t port)
|
|
{
|
|
/* The GPIO should be swapped if swap register is set and active */
|
|
int gpio_port = ((REG_RD(sc, NIG_REG_PORT_SWAP) &&
|
|
REG_RD(sc, NIG_REG_STRAP_OVERRIDE)) ^ port);
|
|
int gpio_shift = gpio_num;
|
|
if (gpio_port)
|
|
gpio_shift += MISC_REGISTERS_GPIO_PORT_SHIFT;
|
|
|
|
uint32_t gpio_mask = (1 << gpio_shift);
|
|
uint32_t gpio_reg;
|
|
|
|
if (gpio_num > MISC_REGISTERS_GPIO_3) {
|
|
PMD_DRV_LOG(NOTICE, "Invalid GPIO %d", gpio_num);
|
|
return -1;
|
|
}
|
|
|
|
/* read GPIO value */
|
|
gpio_reg = REG_RD(sc, MISC_REG_GPIO);
|
|
|
|
/* get the requested pin value */
|
|
return ((gpio_reg & gpio_mask) == gpio_mask) ? 1 : 0;
|
|
}
|
|
|
|
static int
|
|
bnx2x_gpio_write(struct bnx2x_softc *sc, int gpio_num, uint32_t mode, uint8_t port)
|
|
{
|
|
/* The GPIO should be swapped if swap register is set and active */
|
|
int gpio_port = ((REG_RD(sc, NIG_REG_PORT_SWAP) &&
|
|
REG_RD(sc, NIG_REG_STRAP_OVERRIDE)) ^ port);
|
|
int gpio_shift = gpio_num;
|
|
if (gpio_port)
|
|
gpio_shift += MISC_REGISTERS_GPIO_PORT_SHIFT;
|
|
|
|
uint32_t gpio_mask = (1 << gpio_shift);
|
|
uint32_t gpio_reg;
|
|
|
|
if (gpio_num > MISC_REGISTERS_GPIO_3) {
|
|
PMD_DRV_LOG(NOTICE, "Invalid GPIO %d", gpio_num);
|
|
return -1;
|
|
}
|
|
|
|
bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
|
|
|
|
/* read GPIO and mask except the float bits */
|
|
gpio_reg = (REG_RD(sc, MISC_REG_GPIO) & MISC_REGISTERS_GPIO_FLOAT);
|
|
|
|
switch (mode) {
|
|
case MISC_REGISTERS_GPIO_OUTPUT_LOW:
|
|
/* clear FLOAT and set CLR */
|
|
gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
|
|
gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_CLR_POS);
|
|
break;
|
|
|
|
case MISC_REGISTERS_GPIO_OUTPUT_HIGH:
|
|
/* clear FLOAT and set SET */
|
|
gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
|
|
gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_SET_POS);
|
|
break;
|
|
|
|
case MISC_REGISTERS_GPIO_INPUT_HI_Z:
|
|
/* set FLOAT */
|
|
gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
REG_WR(sc, MISC_REG_GPIO, gpio_reg);
|
|
bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
bnx2x_gpio_mult_write(struct bnx2x_softc *sc, uint8_t pins, uint32_t mode)
|
|
{
|
|
uint32_t gpio_reg;
|
|
|
|
/* any port swapping should be handled by caller */
|
|
|
|
bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
|
|
|
|
/* read GPIO and mask except the float bits */
|
|
gpio_reg = REG_RD(sc, MISC_REG_GPIO);
|
|
gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_FLOAT_POS);
|
|
gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_CLR_POS);
|
|
gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_SET_POS);
|
|
|
|
switch (mode) {
|
|
case MISC_REGISTERS_GPIO_OUTPUT_LOW:
|
|
/* set CLR */
|
|
gpio_reg |= (pins << MISC_REGISTERS_GPIO_CLR_POS);
|
|
break;
|
|
|
|
case MISC_REGISTERS_GPIO_OUTPUT_HIGH:
|
|
/* set SET */
|
|
gpio_reg |= (pins << MISC_REGISTERS_GPIO_SET_POS);
|
|
break;
|
|
|
|
case MISC_REGISTERS_GPIO_INPUT_HI_Z:
|
|
/* set FLOAT */
|
|
gpio_reg |= (pins << MISC_REGISTERS_GPIO_FLOAT_POS);
|
|
break;
|
|
|
|
default:
|
|
PMD_DRV_LOG(NOTICE, "Invalid GPIO mode assignment %d", mode);
|
|
bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
|
|
return -1;
|
|
}
|
|
|
|
REG_WR(sc, MISC_REG_GPIO, gpio_reg);
|
|
bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
bnx2x_gpio_int_write(struct bnx2x_softc *sc, int gpio_num, uint32_t mode,
|
|
uint8_t port)
|
|
{
|
|
/* The GPIO should be swapped if swap register is set and active */
|
|
int gpio_port = ((REG_RD(sc, NIG_REG_PORT_SWAP) &&
|
|
REG_RD(sc, NIG_REG_STRAP_OVERRIDE)) ^ port);
|
|
int gpio_shift = gpio_num;
|
|
if (gpio_port)
|
|
gpio_shift += MISC_REGISTERS_GPIO_PORT_SHIFT;
|
|
|
|
uint32_t gpio_mask = (1 << gpio_shift);
|
|
uint32_t gpio_reg;
|
|
|
|
if (gpio_num > MISC_REGISTERS_GPIO_3) {
|
|
PMD_DRV_LOG(NOTICE, "Invalid GPIO %d", gpio_num);
|
|
return -1;
|
|
}
|
|
|
|
bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
|
|
|
|
/* read GPIO int */
|
|
gpio_reg = REG_RD(sc, MISC_REG_GPIO_INT);
|
|
|
|
switch (mode) {
|
|
case MISC_REGISTERS_GPIO_INT_OUTPUT_CLR:
|
|
/* clear SET and set CLR */
|
|
gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS);
|
|
gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS);
|
|
break;
|
|
|
|
case MISC_REGISTERS_GPIO_INT_OUTPUT_SET:
|
|
/* clear CLR and set SET */
|
|
gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS);
|
|
gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
REG_WR(sc, MISC_REG_GPIO_INT, gpio_reg);
|
|
bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
|
|
|
|
return 0;
|
|
}
|
|
|
|
uint32_t
|
|
elink_cb_gpio_read(struct bnx2x_softc * sc, uint16_t gpio_num, uint8_t port)
|
|
{
|
|
return bnx2x_gpio_read(sc, gpio_num, port);
|
|
}
|
|
|
|
uint8_t elink_cb_gpio_write(struct bnx2x_softc * sc, uint16_t gpio_num, uint8_t mode, /* 0=low 1=high */
|
|
uint8_t port)
|
|
{
|
|
return bnx2x_gpio_write(sc, gpio_num, mode, port);
|
|
}
|
|
|
|
uint8_t
|
|
elink_cb_gpio_mult_write(struct bnx2x_softc * sc, uint8_t pins,
|
|
uint8_t mode /* 0=low 1=high */ )
|
|
{
|
|
return bnx2x_gpio_mult_write(sc, pins, mode);
|
|
}
|
|
|
|
uint8_t elink_cb_gpio_int_write(struct bnx2x_softc * sc, uint16_t gpio_num, uint8_t mode, /* 0=low 1=high */
|
|
uint8_t port)
|
|
{
|
|
return bnx2x_gpio_int_write(sc, gpio_num, mode, port);
|
|
}
|
|
|
|
void elink_cb_notify_link_changed(struct bnx2x_softc *sc)
|
|
{
|
|
REG_WR(sc, (MISC_REG_AEU_GENERAL_ATTN_12 +
|
|
(SC_FUNC(sc) * sizeof(uint32_t))), 1);
|
|
}
|
|
|
|
/* send the MCP a request, block until there is a reply */
|
|
uint32_t
|
|
elink_cb_fw_command(struct bnx2x_softc *sc, uint32_t command, uint32_t param)
|
|
{
|
|
int mb_idx = SC_FW_MB_IDX(sc);
|
|
uint32_t seq;
|
|
uint32_t rc = 0;
|
|
uint32_t cnt = 1;
|
|
uint8_t delay = CHIP_REV_IS_SLOW(sc) ? 100 : 10;
|
|
|
|
seq = ++sc->fw_seq;
|
|
SHMEM_WR(sc, func_mb[mb_idx].drv_mb_param, param);
|
|
SHMEM_WR(sc, func_mb[mb_idx].drv_mb_header, (command | seq));
|
|
|
|
PMD_DRV_LOG(DEBUG,
|
|
"wrote command 0x%08x to FW MB param 0x%08x",
|
|
(command | seq), param);
|
|
|
|
/* Let the FW do it's magic. GIve it up to 5 seconds... */
|
|
do {
|
|
DELAY(delay * 1000);
|
|
rc = SHMEM_RD(sc, func_mb[mb_idx].fw_mb_header);
|
|
} while ((seq != (rc & FW_MSG_SEQ_NUMBER_MASK)) && (cnt++ < 500));
|
|
|
|
/* is this a reply to our command? */
|
|
if (seq == (rc & FW_MSG_SEQ_NUMBER_MASK)) {
|
|
rc &= FW_MSG_CODE_MASK;
|
|
} else {
|
|
/* Ruh-roh! */
|
|
PMD_DRV_LOG(NOTICE, "FW failed to respond!");
|
|
rc = 0;
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static uint32_t
|
|
bnx2x_fw_command(struct bnx2x_softc *sc, uint32_t command, uint32_t param)
|
|
{
|
|
return elink_cb_fw_command(sc, command, param);
|
|
}
|
|
|
|
static void
|
|
__storm_memset_dma_mapping(struct bnx2x_softc *sc, uint32_t addr,
|
|
phys_addr_t mapping)
|
|
{
|
|
REG_WR(sc, addr, U64_LO(mapping));
|
|
REG_WR(sc, (addr + 4), U64_HI(mapping));
|
|
}
|
|
|
|
static void
|
|
storm_memset_spq_addr(struct bnx2x_softc *sc, phys_addr_t mapping,
|
|
uint16_t abs_fid)
|
|
{
|
|
uint32_t addr = (XSEM_REG_FAST_MEMORY +
|
|
XSTORM_SPQ_PAGE_BASE_OFFSET(abs_fid));
|
|
__storm_memset_dma_mapping(sc, addr, mapping);
|
|
}
|
|
|
|
static void
|
|
storm_memset_vf_to_pf(struct bnx2x_softc *sc, uint16_t abs_fid, uint16_t pf_id)
|
|
{
|
|
REG_WR8(sc, (BAR_XSTRORM_INTMEM + XSTORM_VF_TO_PF_OFFSET(abs_fid)),
|
|
pf_id);
|
|
REG_WR8(sc, (BAR_CSTRORM_INTMEM + CSTORM_VF_TO_PF_OFFSET(abs_fid)),
|
|
pf_id);
|
|
REG_WR8(sc, (BAR_TSTRORM_INTMEM + TSTORM_VF_TO_PF_OFFSET(abs_fid)),
|
|
pf_id);
|
|
REG_WR8(sc, (BAR_USTRORM_INTMEM + USTORM_VF_TO_PF_OFFSET(abs_fid)),
|
|
pf_id);
|
|
}
|
|
|
|
static void
|
|
storm_memset_func_en(struct bnx2x_softc *sc, uint16_t abs_fid, uint8_t enable)
|
|
{
|
|
REG_WR8(sc, (BAR_XSTRORM_INTMEM + XSTORM_FUNC_EN_OFFSET(abs_fid)),
|
|
enable);
|
|
REG_WR8(sc, (BAR_CSTRORM_INTMEM + CSTORM_FUNC_EN_OFFSET(abs_fid)),
|
|
enable);
|
|
REG_WR8(sc, (BAR_TSTRORM_INTMEM + TSTORM_FUNC_EN_OFFSET(abs_fid)),
|
|
enable);
|
|
REG_WR8(sc, (BAR_USTRORM_INTMEM + USTORM_FUNC_EN_OFFSET(abs_fid)),
|
|
enable);
|
|
}
|
|
|
|
static void
|
|
storm_memset_eq_data(struct bnx2x_softc *sc, struct event_ring_data *eq_data,
|
|
uint16_t pfid)
|
|
{
|
|
uint32_t addr;
|
|
size_t size;
|
|
|
|
addr = (BAR_CSTRORM_INTMEM + CSTORM_EVENT_RING_DATA_OFFSET(pfid));
|
|
size = sizeof(struct event_ring_data);
|
|
ecore_storm_memset_struct(sc, addr, size, (uint32_t *) eq_data);
|
|
}
|
|
|
|
static void
|
|
storm_memset_eq_prod(struct bnx2x_softc *sc, uint16_t eq_prod, uint16_t pfid)
|
|
{
|
|
uint32_t addr = (BAR_CSTRORM_INTMEM +
|
|
CSTORM_EVENT_RING_PROD_OFFSET(pfid));
|
|
REG_WR16(sc, addr, eq_prod);
|
|
}
|
|
|
|
/*
|
|
* Post a slowpath command.
|
|
*
|
|
* A slowpath command is used to propogate a configuration change through
|
|
* the controller in a controlled manner, allowing each STORM processor and
|
|
* other H/W blocks to phase in the change. The commands sent on the
|
|
* slowpath are referred to as ramrods. Depending on the ramrod used the
|
|
* completion of the ramrod will occur in different ways. Here's a
|
|
* breakdown of ramrods and how they complete:
|
|
*
|
|
* RAMROD_CMD_ID_ETH_PORT_SETUP
|
|
* Used to setup the leading connection on a port. Completes on the
|
|
* Receive Completion Queue (RCQ) of that port (typically fp[0]).
|
|
*
|
|
* RAMROD_CMD_ID_ETH_CLIENT_SETUP
|
|
* Used to setup an additional connection on a port. Completes on the
|
|
* RCQ of the multi-queue/RSS connection being initialized.
|
|
*
|
|
* RAMROD_CMD_ID_ETH_STAT_QUERY
|
|
* Used to force the storm processors to update the statistics database
|
|
* in host memory. This ramrod is send on the leading connection CID and
|
|
* completes as an index increment of the CSTORM on the default status
|
|
* block.
|
|
*
|
|
* RAMROD_CMD_ID_ETH_UPDATE
|
|
* Used to update the state of the leading connection, usually to udpate
|
|
* the RSS indirection table. Completes on the RCQ of the leading
|
|
* connection. (Not currently used under FreeBSD until OS support becomes
|
|
* available.)
|
|
*
|
|
* RAMROD_CMD_ID_ETH_HALT
|
|
* Used when tearing down a connection prior to driver unload. Completes
|
|
* on the RCQ of the multi-queue/RSS connection being torn down. Don't
|
|
* use this on the leading connection.
|
|
*
|
|
* RAMROD_CMD_ID_ETH_SET_MAC
|
|
* Sets the Unicast/Broadcast/Multicast used by the port. Completes on
|
|
* the RCQ of the leading connection.
|
|
*
|
|
* RAMROD_CMD_ID_ETH_CFC_DEL
|
|
* Used when tearing down a conneciton prior to driver unload. Completes
|
|
* on the RCQ of the leading connection (since the current connection
|
|
* has been completely removed from controller memory).
|
|
*
|
|
* RAMROD_CMD_ID_ETH_PORT_DEL
|
|
* Used to tear down the leading connection prior to driver unload,
|
|
* typically fp[0]. Completes as an index increment of the CSTORM on the
|
|
* default status block.
|
|
*
|
|
* RAMROD_CMD_ID_ETH_FORWARD_SETUP
|
|
* Used for connection offload. Completes on the RCQ of the multi-queue
|
|
* RSS connection that is being offloaded. (Not currently used under
|
|
* FreeBSD.)
|
|
*
|
|
* There can only be one command pending per function.
|
|
*
|
|
* Returns:
|
|
* 0 = Success, !0 = Failure.
|
|
*/
|
|
|
|
/* must be called under the spq lock */
|
|
static inline struct eth_spe *bnx2x_sp_get_next(struct bnx2x_softc *sc)
|
|
{
|
|
struct eth_spe *next_spe = sc->spq_prod_bd;
|
|
|
|
if (sc->spq_prod_bd == sc->spq_last_bd) {
|
|
/* wrap back to the first eth_spq */
|
|
sc->spq_prod_bd = sc->spq;
|
|
sc->spq_prod_idx = 0;
|
|
} else {
|
|
sc->spq_prod_bd++;
|
|
sc->spq_prod_idx++;
|
|
}
|
|
|
|
return next_spe;
|
|
}
|
|
|
|
/* must be called under the spq lock */
|
|
static void bnx2x_sp_prod_update(struct bnx2x_softc *sc)
|
|
{
|
|
int func = SC_FUNC(sc);
|
|
|
|
/*
|
|
* Make sure that BD data is updated before writing the producer.
|
|
* BD data is written to the memory, the producer is read from the
|
|
* memory, thus we need a full memory barrier to ensure the ordering.
|
|
*/
|
|
mb();
|
|
|
|
REG_WR16(sc, (BAR_XSTRORM_INTMEM + XSTORM_SPQ_PROD_OFFSET(func)),
|
|
sc->spq_prod_idx);
|
|
|
|
mb();
|
|
}
|
|
|
|
/**
|
|
* bnx2x_is_contextless_ramrod - check if the current command ends on EQ
|
|
*
|
|
* @cmd: command to check
|
|
* @cmd_type: command type
|
|
*/
|
|
static int bnx2x_is_contextless_ramrod(int cmd, int cmd_type)
|
|
{
|
|
if ((cmd_type == NONE_CONNECTION_TYPE) ||
|
|
(cmd == RAMROD_CMD_ID_ETH_FORWARD_SETUP) ||
|
|
(cmd == RAMROD_CMD_ID_ETH_CLASSIFICATION_RULES) ||
|
|
(cmd == RAMROD_CMD_ID_ETH_FILTER_RULES) ||
|
|
(cmd == RAMROD_CMD_ID_ETH_MULTICAST_RULES) ||
|
|
(cmd == RAMROD_CMD_ID_ETH_SET_MAC) ||
|
|
(cmd == RAMROD_CMD_ID_ETH_RSS_UPDATE)) {
|
|
return TRUE;
|
|
} else {
|
|
return FALSE;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* bnx2x_sp_post - place a single command on an SP ring
|
|
*
|
|
* @sc: driver handle
|
|
* @command: command to place (e.g. SETUP, FILTER_RULES, etc.)
|
|
* @cid: SW CID the command is related to
|
|
* @data_hi: command private data address (high 32 bits)
|
|
* @data_lo: command private data address (low 32 bits)
|
|
* @cmd_type: command type (e.g. NONE, ETH)
|
|
*
|
|
* SP data is handled as if it's always an address pair, thus data fields are
|
|
* not swapped to little endian in upper functions. Instead this function swaps
|
|
* data as if it's two uint32 fields.
|
|
*/
|
|
int
|
|
bnx2x_sp_post(struct bnx2x_softc *sc, int command, int cid, uint32_t data_hi,
|
|
uint32_t data_lo, int cmd_type)
|
|
{
|
|
struct eth_spe *spe;
|
|
uint16_t type;
|
|
int common;
|
|
|
|
common = bnx2x_is_contextless_ramrod(command, cmd_type);
|
|
|
|
if (common) {
|
|
if (!atomic_load_acq_long(&sc->eq_spq_left)) {
|
|
PMD_DRV_LOG(INFO, "EQ ring is full!");
|
|
return -1;
|
|
}
|
|
} else {
|
|
if (!atomic_load_acq_long(&sc->cq_spq_left)) {
|
|
PMD_DRV_LOG(INFO, "SPQ ring is full!");
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
spe = bnx2x_sp_get_next(sc);
|
|
|
|
/* CID needs port number to be encoded int it */
|
|
spe->hdr.conn_and_cmd_data =
|
|
htole32((command << SPE_HDR_CMD_ID_SHIFT) | HW_CID(sc, cid));
|
|
|
|
type = (cmd_type << SPE_HDR_CONN_TYPE_SHIFT) & SPE_HDR_CONN_TYPE;
|
|
|
|
/* TBD: Check if it works for VFs */
|
|
type |= ((SC_FUNC(sc) << SPE_HDR_FUNCTION_ID_SHIFT) &
|
|
SPE_HDR_FUNCTION_ID);
|
|
|
|
spe->hdr.type = htole16(type);
|
|
|
|
spe->data.update_data_addr.hi = htole32(data_hi);
|
|
spe->data.update_data_addr.lo = htole32(data_lo);
|
|
|
|
/*
|
|
* It's ok if the actual decrement is issued towards the memory
|
|
* somewhere between the lock and unlock. Thus no more explict
|
|
* memory barrier is needed.
|
|
*/
|
|
if (common) {
|
|
atomic_subtract_acq_long(&sc->eq_spq_left, 1);
|
|
} else {
|
|
atomic_subtract_acq_long(&sc->cq_spq_left, 1);
|
|
}
|
|
|
|
PMD_DRV_LOG(DEBUG,
|
|
"SPQE[%x] (%x:%x) (cmd, common?) (%d,%d) hw_cid %x"
|
|
"data (%x:%x) type(0x%x) left (CQ, EQ) (%lx,%lx)",
|
|
sc->spq_prod_idx,
|
|
(uint32_t) U64_HI(sc->spq_dma.paddr),
|
|
(uint32_t) (U64_LO(sc->spq_dma.paddr) +
|
|
(uint8_t *) sc->spq_prod_bd -
|
|
(uint8_t *) sc->spq), command, common,
|
|
HW_CID(sc, cid), data_hi, data_lo, type,
|
|
atomic_load_acq_long(&sc->cq_spq_left),
|
|
atomic_load_acq_long(&sc->eq_spq_left));
|
|
|
|
bnx2x_sp_prod_update(sc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bnx2x_drv_pulse(struct bnx2x_softc *sc)
|
|
{
|
|
SHMEM_WR(sc, func_mb[SC_FW_MB_IDX(sc)].drv_pulse_mb,
|
|
sc->fw_drv_pulse_wr_seq);
|
|
}
|
|
|
|
static int bnx2x_tx_queue_has_work(const struct bnx2x_fastpath *fp)
|
|
{
|
|
uint16_t hw_cons;
|
|
struct bnx2x_tx_queue *txq = fp->sc->tx_queues[fp->index];
|
|
|
|
if (unlikely(!txq)) {
|
|
PMD_TX_LOG(ERR, "ERROR: TX queue is NULL");
|
|
return 0;
|
|
}
|
|
|
|
mb(); /* status block fields can change */
|
|
hw_cons = le16toh(*fp->tx_cons_sb);
|
|
return hw_cons != txq->tx_pkt_head;
|
|
}
|
|
|
|
static uint8_t bnx2x_has_tx_work(struct bnx2x_fastpath *fp)
|
|
{
|
|
/* expand this for multi-cos if ever supported */
|
|
return bnx2x_tx_queue_has_work(fp);
|
|
}
|
|
|
|
static int bnx2x_has_rx_work(struct bnx2x_fastpath *fp)
|
|
{
|
|
uint16_t rx_cq_cons_sb;
|
|
struct bnx2x_rx_queue *rxq;
|
|
rxq = fp->sc->rx_queues[fp->index];
|
|
if (unlikely(!rxq)) {
|
|
PMD_RX_LOG(ERR, "ERROR: RX queue is NULL");
|
|
return 0;
|
|
}
|
|
|
|
mb(); /* status block fields can change */
|
|
rx_cq_cons_sb = le16toh(*fp->rx_cq_cons_sb);
|
|
if (unlikely((rx_cq_cons_sb & MAX_RCQ_ENTRIES(rxq)) ==
|
|
MAX_RCQ_ENTRIES(rxq)))
|
|
rx_cq_cons_sb++;
|
|
return rxq->rx_cq_head != rx_cq_cons_sb;
|
|
}
|
|
|
|
static void
|
|
bnx2x_sp_event(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
|
|
union eth_rx_cqe *rr_cqe)
|
|
{
|
|
#ifdef RTE_LIBRTE_BNX2X_DEBUG
|
|
int cid = SW_CID(rr_cqe->ramrod_cqe.conn_and_cmd_data);
|
|
#endif
|
|
int command = CQE_CMD(rr_cqe->ramrod_cqe.conn_and_cmd_data);
|
|
enum ecore_queue_cmd drv_cmd = ECORE_Q_CMD_MAX;
|
|
struct ecore_queue_sp_obj *q_obj = &BNX2X_SP_OBJ(sc, fp).q_obj;
|
|
|
|
PMD_DRV_LOG(DEBUG,
|
|
"fp=%d cid=%d got ramrod #%d state is %x type is %d",
|
|
fp->index, cid, command, sc->state,
|
|
rr_cqe->ramrod_cqe.ramrod_type);
|
|
|
|
switch (command) {
|
|
case (RAMROD_CMD_ID_ETH_CLIENT_UPDATE):
|
|
PMD_DRV_LOG(DEBUG, "got UPDATE ramrod. CID %d", cid);
|
|
drv_cmd = ECORE_Q_CMD_UPDATE;
|
|
break;
|
|
|
|
case (RAMROD_CMD_ID_ETH_CLIENT_SETUP):
|
|
PMD_DRV_LOG(DEBUG, "got MULTI[%d] setup ramrod", cid);
|
|
drv_cmd = ECORE_Q_CMD_SETUP;
|
|
break;
|
|
|
|
case (RAMROD_CMD_ID_ETH_TX_QUEUE_SETUP):
|
|
PMD_DRV_LOG(DEBUG, "got MULTI[%d] tx-only setup ramrod", cid);
|
|
drv_cmd = ECORE_Q_CMD_SETUP_TX_ONLY;
|
|
break;
|
|
|
|
case (RAMROD_CMD_ID_ETH_HALT):
|
|
PMD_DRV_LOG(DEBUG, "got MULTI[%d] halt ramrod", cid);
|
|
drv_cmd = ECORE_Q_CMD_HALT;
|
|
break;
|
|
|
|
case (RAMROD_CMD_ID_ETH_TERMINATE):
|
|
PMD_DRV_LOG(DEBUG, "got MULTI[%d] teminate ramrod", cid);
|
|
drv_cmd = ECORE_Q_CMD_TERMINATE;
|
|
break;
|
|
|
|
case (RAMROD_CMD_ID_ETH_EMPTY):
|
|
PMD_DRV_LOG(DEBUG, "got MULTI[%d] empty ramrod", cid);
|
|
drv_cmd = ECORE_Q_CMD_EMPTY;
|
|
break;
|
|
|
|
default:
|
|
PMD_DRV_LOG(DEBUG,
|
|
"ERROR: unexpected MC reply (%d)"
|
|
"on fp[%d]", command, fp->index);
|
|
return;
|
|
}
|
|
|
|
if ((drv_cmd != ECORE_Q_CMD_MAX) &&
|
|
q_obj->complete_cmd(sc, q_obj, drv_cmd)) {
|
|
/*
|
|
* q_obj->complete_cmd() failure means that this was
|
|
* an unexpected completion.
|
|
*
|
|
* In this case we don't want to increase the sc->spq_left
|
|
* because apparently we haven't sent this command the first
|
|
* place.
|
|
*/
|
|
// rte_panic("Unexpected SP completion");
|
|
return;
|
|
}
|
|
|
|
atomic_add_acq_long(&sc->cq_spq_left, 1);
|
|
|
|
PMD_DRV_LOG(DEBUG, "sc->cq_spq_left 0x%lx",
|
|
atomic_load_acq_long(&sc->cq_spq_left));
|
|
}
|
|
|
|
static uint8_t bnx2x_rxeof(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp)
|
|
{
|
|
struct bnx2x_rx_queue *rxq;
|
|
uint16_t bd_cons, bd_prod, bd_prod_fw, comp_ring_cons;
|
|
uint16_t hw_cq_cons, sw_cq_cons, sw_cq_prod;
|
|
|
|
rxq = sc->rx_queues[fp->index];
|
|
if (!rxq) {
|
|
PMD_RX_LOG(ERR, "RX queue %d is NULL", fp->index);
|
|
return 0;
|
|
}
|
|
|
|
/* CQ "next element" is of the size of the regular element */
|
|
hw_cq_cons = le16toh(*fp->rx_cq_cons_sb);
|
|
if (unlikely((hw_cq_cons & USABLE_RCQ_ENTRIES_PER_PAGE) ==
|
|
USABLE_RCQ_ENTRIES_PER_PAGE)) {
|
|
hw_cq_cons++;
|
|
}
|
|
|
|
bd_cons = rxq->rx_bd_head;
|
|
bd_prod = rxq->rx_bd_tail;
|
|
bd_prod_fw = bd_prod;
|
|
sw_cq_cons = rxq->rx_cq_head;
|
|
sw_cq_prod = rxq->rx_cq_tail;
|
|
|
|
/*
|
|
* Memory barrier necessary as speculative reads of the rx
|
|
* buffer can be ahead of the index in the status block
|
|
*/
|
|
rmb();
|
|
|
|
while (sw_cq_cons != hw_cq_cons) {
|
|
union eth_rx_cqe *cqe;
|
|
struct eth_fast_path_rx_cqe *cqe_fp;
|
|
uint8_t cqe_fp_flags;
|
|
enum eth_rx_cqe_type cqe_fp_type;
|
|
|
|
comp_ring_cons = RCQ_ENTRY(sw_cq_cons, rxq);
|
|
bd_prod = RX_BD(bd_prod, rxq);
|
|
bd_cons = RX_BD(bd_cons, rxq);
|
|
|
|
cqe = &rxq->cq_ring[comp_ring_cons];
|
|
cqe_fp = &cqe->fast_path_cqe;
|
|
cqe_fp_flags = cqe_fp->type_error_flags;
|
|
cqe_fp_type = cqe_fp_flags & ETH_FAST_PATH_RX_CQE_TYPE;
|
|
|
|
/* is this a slowpath msg? */
|
|
if (CQE_TYPE_SLOW(cqe_fp_type)) {
|
|
bnx2x_sp_event(sc, fp, cqe);
|
|
goto next_cqe;
|
|
}
|
|
|
|
/* is this an error packet? */
|
|
if (unlikely(cqe_fp_flags &
|
|
ETH_FAST_PATH_RX_CQE_PHY_DECODE_ERR_FLG)) {
|
|
PMD_RX_LOG(DEBUG, "flags 0x%x rx packet %u",
|
|
cqe_fp_flags, sw_cq_cons);
|
|
goto next_rx;
|
|
}
|
|
|
|
PMD_RX_LOG(DEBUG, "Dropping fastpath called from attn poller!");
|
|
|
|
next_rx:
|
|
bd_cons = NEXT_RX_BD(bd_cons);
|
|
bd_prod = NEXT_RX_BD(bd_prod);
|
|
bd_prod_fw = NEXT_RX_BD(bd_prod_fw);
|
|
|
|
next_cqe:
|
|
sw_cq_prod = NEXT_RCQ_IDX(sw_cq_prod);
|
|
sw_cq_cons = NEXT_RCQ_IDX(sw_cq_cons);
|
|
|
|
} /* while work to do */
|
|
|
|
rxq->rx_bd_head = bd_cons;
|
|
rxq->rx_bd_tail = bd_prod_fw;
|
|
rxq->rx_cq_head = sw_cq_cons;
|
|
rxq->rx_cq_tail = sw_cq_prod;
|
|
|
|
/* Update producers */
|
|
bnx2x_update_rx_prod(sc, fp, bd_prod_fw, sw_cq_prod);
|
|
|
|
return sw_cq_cons != hw_cq_cons;
|
|
}
|
|
|
|
static uint16_t
|
|
bnx2x_free_tx_pkt(__rte_unused struct bnx2x_fastpath *fp, struct bnx2x_tx_queue *txq,
|
|
uint16_t pkt_idx, uint16_t bd_idx)
|
|
{
|
|
struct eth_tx_start_bd *tx_start_bd =
|
|
&txq->tx_ring[TX_BD(bd_idx, txq)].start_bd;
|
|
uint16_t nbd = rte_le_to_cpu_16(tx_start_bd->nbd);
|
|
struct rte_mbuf *tx_mbuf = txq->sw_ring[TX_BD(pkt_idx, txq)];
|
|
|
|
if (likely(tx_mbuf != NULL)) {
|
|
rte_pktmbuf_free_seg(tx_mbuf);
|
|
} else {
|
|
PMD_RX_LOG(ERR, "fp[%02d] lost mbuf %lu",
|
|
fp->index, (unsigned long)TX_BD(pkt_idx, txq));
|
|
}
|
|
|
|
txq->sw_ring[TX_BD(pkt_idx, txq)] = NULL;
|
|
txq->nb_tx_avail += nbd;
|
|
|
|
while (nbd--)
|
|
bd_idx = NEXT_TX_BD(bd_idx);
|
|
|
|
return bd_idx;
|
|
}
|
|
|
|
/* processes transmit completions */
|
|
uint8_t bnx2x_txeof(__rte_unused struct bnx2x_softc * sc, struct bnx2x_fastpath * fp)
|
|
{
|
|
uint16_t bd_cons, hw_cons, sw_cons;
|
|
__rte_unused uint16_t tx_bd_avail;
|
|
|
|
struct bnx2x_tx_queue *txq = fp->sc->tx_queues[fp->index];
|
|
|
|
if (unlikely(!txq)) {
|
|
PMD_TX_LOG(ERR, "ERROR: TX queue is NULL");
|
|
return 0;
|
|
}
|
|
|
|
bd_cons = txq->tx_bd_head;
|
|
hw_cons = rte_le_to_cpu_16(*fp->tx_cons_sb);
|
|
sw_cons = txq->tx_pkt_head;
|
|
|
|
while (sw_cons != hw_cons) {
|
|
bd_cons = bnx2x_free_tx_pkt(fp, txq, sw_cons, bd_cons);
|
|
sw_cons++;
|
|
}
|
|
|
|
txq->tx_pkt_head = sw_cons;
|
|
txq->tx_bd_head = bd_cons;
|
|
|
|
tx_bd_avail = txq->nb_tx_avail;
|
|
|
|
PMD_TX_LOG(DEBUG, "fp[%02d] avail=%u cons_sb=%u, "
|
|
"pkt_head=%u pkt_tail=%u bd_head=%u bd_tail=%u",
|
|
fp->index, tx_bd_avail, hw_cons,
|
|
txq->tx_pkt_head, txq->tx_pkt_tail,
|
|
txq->tx_bd_head, txq->tx_bd_tail);
|
|
return TRUE;
|
|
}
|
|
|
|
static void bnx2x_drain_tx_queues(struct bnx2x_softc *sc)
|
|
{
|
|
struct bnx2x_fastpath *fp;
|
|
int i, count;
|
|
|
|
/* wait until all TX fastpath tasks have completed */
|
|
for (i = 0; i < sc->num_queues; i++) {
|
|
fp = &sc->fp[i];
|
|
|
|
count = 1000;
|
|
|
|
while (bnx2x_has_tx_work(fp)) {
|
|
bnx2x_txeof(sc, fp);
|
|
|
|
if (count == 0) {
|
|
PMD_TX_LOG(ERR,
|
|
"Timeout waiting for fp[%d] "
|
|
"transmits to complete!", i);
|
|
rte_panic("tx drain failure");
|
|
return;
|
|
}
|
|
|
|
count--;
|
|
DELAY(1000);
|
|
rmb();
|
|
}
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static int
|
|
bnx2x_del_all_macs(struct bnx2x_softc *sc, struct ecore_vlan_mac_obj *mac_obj,
|
|
int mac_type, uint8_t wait_for_comp)
|
|
{
|
|
unsigned long ramrod_flags = 0, vlan_mac_flags = 0;
|
|
int rc;
|
|
|
|
/* wait for completion of requested */
|
|
if (wait_for_comp) {
|
|
bnx2x_set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
|
|
}
|
|
|
|
/* Set the mac type of addresses we want to clear */
|
|
bnx2x_set_bit(mac_type, &vlan_mac_flags);
|
|
|
|
rc = mac_obj->delete_all(sc, mac_obj, &vlan_mac_flags, &ramrod_flags);
|
|
if (rc < 0)
|
|
PMD_DRV_LOG(ERR, "Failed to delete MACs (%d)", rc);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int
|
|
bnx2x_fill_accept_flags(struct bnx2x_softc *sc, uint32_t rx_mode,
|
|
unsigned long *rx_accept_flags,
|
|
unsigned long *tx_accept_flags)
|
|
{
|
|
/* Clear the flags first */
|
|
*rx_accept_flags = 0;
|
|
*tx_accept_flags = 0;
|
|
|
|
switch (rx_mode) {
|
|
case BNX2X_RX_MODE_NONE:
|
|
/*
|
|
* 'drop all' supersedes any accept flags that may have been
|
|
* passed to the function.
|
|
*/
|
|
break;
|
|
|
|
case BNX2X_RX_MODE_NORMAL:
|
|
bnx2x_set_bit(ECORE_ACCEPT_UNICAST, rx_accept_flags);
|
|
bnx2x_set_bit(ECORE_ACCEPT_MULTICAST, rx_accept_flags);
|
|
bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, rx_accept_flags);
|
|
|
|
/* internal switching mode */
|
|
bnx2x_set_bit(ECORE_ACCEPT_UNICAST, tx_accept_flags);
|
|
bnx2x_set_bit(ECORE_ACCEPT_MULTICAST, tx_accept_flags);
|
|
bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, tx_accept_flags);
|
|
|
|
break;
|
|
|
|
case BNX2X_RX_MODE_ALLMULTI:
|
|
bnx2x_set_bit(ECORE_ACCEPT_UNICAST, rx_accept_flags);
|
|
bnx2x_set_bit(ECORE_ACCEPT_ALL_MULTICAST, rx_accept_flags);
|
|
bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, rx_accept_flags);
|
|
|
|
/* internal switching mode */
|
|
bnx2x_set_bit(ECORE_ACCEPT_UNICAST, tx_accept_flags);
|
|
bnx2x_set_bit(ECORE_ACCEPT_ALL_MULTICAST, tx_accept_flags);
|
|
bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, tx_accept_flags);
|
|
|
|
break;
|
|
|
|
case BNX2X_RX_MODE_ALLMULTI_PROMISC:
|
|
case BNX2X_RX_MODE_PROMISC:
|
|
/*
|
|
* According to deffinition of SI mode, iface in promisc mode
|
|
* should receive matched and unmatched (in resolution of port)
|
|
* unicast packets.
|
|
*/
|
|
bnx2x_set_bit(ECORE_ACCEPT_UNMATCHED, rx_accept_flags);
|
|
bnx2x_set_bit(ECORE_ACCEPT_UNICAST, rx_accept_flags);
|
|
bnx2x_set_bit(ECORE_ACCEPT_ALL_MULTICAST, rx_accept_flags);
|
|
bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, rx_accept_flags);
|
|
|
|
/* internal switching mode */
|
|
bnx2x_set_bit(ECORE_ACCEPT_ALL_MULTICAST, tx_accept_flags);
|
|
bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, tx_accept_flags);
|
|
|
|
if (IS_MF_SI(sc)) {
|
|
bnx2x_set_bit(ECORE_ACCEPT_ALL_UNICAST, tx_accept_flags);
|
|
} else {
|
|
bnx2x_set_bit(ECORE_ACCEPT_UNICAST, tx_accept_flags);
|
|
}
|
|
|
|
break;
|
|
|
|
default:
|
|
PMD_RX_LOG(ERR, "Unknown rx_mode (%d)", rx_mode);
|
|
return -1;
|
|
}
|
|
|
|
/* Set ACCEPT_ANY_VLAN as we do not enable filtering by VLAN */
|
|
if (rx_mode != BNX2X_RX_MODE_NONE) {
|
|
bnx2x_set_bit(ECORE_ACCEPT_ANY_VLAN, rx_accept_flags);
|
|
bnx2x_set_bit(ECORE_ACCEPT_ANY_VLAN, tx_accept_flags);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
bnx2x_set_q_rx_mode(struct bnx2x_softc *sc, uint8_t cl_id,
|
|
unsigned long rx_mode_flags,
|
|
unsigned long rx_accept_flags,
|
|
unsigned long tx_accept_flags, unsigned long ramrod_flags)
|
|
{
|
|
struct ecore_rx_mode_ramrod_params ramrod_param;
|
|
int rc;
|
|
|
|
memset(&ramrod_param, 0, sizeof(ramrod_param));
|
|
|
|
/* Prepare ramrod parameters */
|
|
ramrod_param.cid = 0;
|
|
ramrod_param.cl_id = cl_id;
|
|
ramrod_param.rx_mode_obj = &sc->rx_mode_obj;
|
|
ramrod_param.func_id = SC_FUNC(sc);
|
|
|
|
ramrod_param.pstate = &sc->sp_state;
|
|
ramrod_param.state = ECORE_FILTER_RX_MODE_PENDING;
|
|
|
|
ramrod_param.rdata = BNX2X_SP(sc, rx_mode_rdata);
|
|
ramrod_param.rdata_mapping =
|
|
(phys_addr_t)BNX2X_SP_MAPPING(sc, rx_mode_rdata),
|
|
bnx2x_set_bit(ECORE_FILTER_RX_MODE_PENDING, &sc->sp_state);
|
|
|
|
ramrod_param.ramrod_flags = ramrod_flags;
|
|
ramrod_param.rx_mode_flags = rx_mode_flags;
|
|
|
|
ramrod_param.rx_accept_flags = rx_accept_flags;
|
|
ramrod_param.tx_accept_flags = tx_accept_flags;
|
|
|
|
rc = ecore_config_rx_mode(sc, &ramrod_param);
|
|
if (rc < 0) {
|
|
PMD_RX_LOG(ERR, "Set rx_mode %d failed", sc->rx_mode);
|
|
return rc;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int bnx2x_set_storm_rx_mode(struct bnx2x_softc *sc)
|
|
{
|
|
unsigned long rx_mode_flags = 0, ramrod_flags = 0;
|
|
unsigned long rx_accept_flags = 0, tx_accept_flags = 0;
|
|
int rc;
|
|
|
|
rc = bnx2x_fill_accept_flags(sc, sc->rx_mode, &rx_accept_flags,
|
|
&tx_accept_flags);
|
|
if (rc) {
|
|
return rc;
|
|
}
|
|
|
|
bnx2x_set_bit(RAMROD_RX, &ramrod_flags);
|
|
bnx2x_set_bit(RAMROD_TX, &ramrod_flags);
|
|
bnx2x_set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
|
|
|
|
return bnx2x_set_q_rx_mode(sc, sc->fp[0].cl_id, rx_mode_flags,
|
|
rx_accept_flags, tx_accept_flags,
|
|
ramrod_flags);
|
|
}
|
|
|
|
/* returns the "mcp load_code" according to global load_count array */
|
|
static int bnx2x_nic_load_no_mcp(struct bnx2x_softc *sc)
|
|
{
|
|
int path = SC_PATH(sc);
|
|
int port = SC_PORT(sc);
|
|
|
|
PMD_DRV_LOG(INFO, "NO MCP - load counts[%d] %d, %d, %d",
|
|
path, load_count[path][0], load_count[path][1],
|
|
load_count[path][2]);
|
|
|
|
load_count[path][0]++;
|
|
load_count[path][1 + port]++;
|
|
PMD_DRV_LOG(INFO, "NO MCP - new load counts[%d] %d, %d, %d",
|
|
path, load_count[path][0], load_count[path][1],
|
|
load_count[path][2]);
|
|
if (load_count[path][0] == 1)
|
|
return FW_MSG_CODE_DRV_LOAD_COMMON;
|
|
else if (load_count[path][1 + port] == 1)
|
|
return FW_MSG_CODE_DRV_LOAD_PORT;
|
|
else
|
|
return FW_MSG_CODE_DRV_LOAD_FUNCTION;
|
|
}
|
|
|
|
/* returns the "mcp load_code" according to global load_count array */
|
|
static int bnx2x_nic_unload_no_mcp(struct bnx2x_softc *sc)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
int path = SC_PATH(sc);
|
|
|
|
PMD_DRV_LOG(INFO, "NO MCP - load counts[%d] %d, %d, %d",
|
|
path, load_count[path][0], load_count[path][1],
|
|
load_count[path][2]);
|
|
load_count[path][0]--;
|
|
load_count[path][1 + port]--;
|
|
PMD_DRV_LOG(INFO, "NO MCP - new load counts[%d] %d, %d, %d",
|
|
path, load_count[path][0], load_count[path][1],
|
|
load_count[path][2]);
|
|
if (load_count[path][0] == 0) {
|
|
return FW_MSG_CODE_DRV_UNLOAD_COMMON;
|
|
} else if (load_count[path][1 + port] == 0) {
|
|
return FW_MSG_CODE_DRV_UNLOAD_PORT;
|
|
} else {
|
|
return FW_MSG_CODE_DRV_UNLOAD_FUNCTION;
|
|
}
|
|
}
|
|
|
|
/* request unload mode from the MCP: COMMON, PORT or FUNCTION */
|
|
static uint32_t bnx2x_send_unload_req(struct bnx2x_softc *sc, int unload_mode)
|
|
{
|
|
uint32_t reset_code = 0;
|
|
|
|
/* Select the UNLOAD request mode */
|
|
if (unload_mode == UNLOAD_NORMAL) {
|
|
reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
|
|
} else {
|
|
reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
|
|
}
|
|
|
|
/* Send the request to the MCP */
|
|
if (!BNX2X_NOMCP(sc)) {
|
|
reset_code = bnx2x_fw_command(sc, reset_code, 0);
|
|
} else {
|
|
reset_code = bnx2x_nic_unload_no_mcp(sc);
|
|
}
|
|
|
|
return reset_code;
|
|
}
|
|
|
|
/* send UNLOAD_DONE command to the MCP */
|
|
static void bnx2x_send_unload_done(struct bnx2x_softc *sc, uint8_t keep_link)
|
|
{
|
|
uint32_t reset_param =
|
|
keep_link ? DRV_MSG_CODE_UNLOAD_SKIP_LINK_RESET : 0;
|
|
|
|
/* Report UNLOAD_DONE to MCP */
|
|
if (!BNX2X_NOMCP(sc)) {
|
|
bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_DONE, reset_param);
|
|
}
|
|
}
|
|
|
|
static int bnx2x_func_wait_started(struct bnx2x_softc *sc)
|
|
{
|
|
int tout = 50;
|
|
|
|
if (!sc->port.pmf) {
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* (assumption: No Attention from MCP at this stage)
|
|
* PMF probably in the middle of TX disable/enable transaction
|
|
* 1. Sync IRS for default SB
|
|
* 2. Sync SP queue - this guarantees us that attention handling started
|
|
* 3. Wait, that TX disable/enable transaction completes
|
|
*
|
|
* 1+2 guarantee that if DCBX attention was scheduled it already changed
|
|
* pending bit of transaction from STARTED-->TX_STOPPED, if we already
|
|
* received completion for the transaction the state is TX_STOPPED.
|
|
* State will return to STARTED after completion of TX_STOPPED-->STARTED
|
|
* transaction.
|
|
*/
|
|
|
|
while (ecore_func_get_state(sc, &sc->func_obj) !=
|
|
ECORE_F_STATE_STARTED && tout--) {
|
|
DELAY(20000);
|
|
}
|
|
|
|
if (ecore_func_get_state(sc, &sc->func_obj) != ECORE_F_STATE_STARTED) {
|
|
/*
|
|
* Failed to complete the transaction in a "good way"
|
|
* Force both transactions with CLR bit.
|
|
*/
|
|
struct ecore_func_state_params func_params = { NULL };
|
|
|
|
PMD_DRV_LOG(NOTICE, "Unexpected function state! "
|
|
"Forcing STARTED-->TX_STOPPED-->STARTED");
|
|
|
|
func_params.f_obj = &sc->func_obj;
|
|
bnx2x_set_bit(RAMROD_DRV_CLR_ONLY, &func_params.ramrod_flags);
|
|
|
|
/* STARTED-->TX_STOPPED */
|
|
func_params.cmd = ECORE_F_CMD_TX_STOP;
|
|
ecore_func_state_change(sc, &func_params);
|
|
|
|
/* TX_STOPPED-->STARTED */
|
|
func_params.cmd = ECORE_F_CMD_TX_START;
|
|
return ecore_func_state_change(sc, &func_params);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_stop_queue(struct bnx2x_softc *sc, int index)
|
|
{
|
|
struct bnx2x_fastpath *fp = &sc->fp[index];
|
|
struct ecore_queue_state_params q_params = { NULL };
|
|
int rc;
|
|
|
|
PMD_DRV_LOG(DEBUG, "stopping queue %d cid %d", index, fp->index);
|
|
|
|
q_params.q_obj = &sc->sp_objs[fp->index].q_obj;
|
|
/* We want to wait for completion in this context */
|
|
bnx2x_set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags);
|
|
|
|
/* Stop the primary connection: */
|
|
|
|
/* ...halt the connection */
|
|
q_params.cmd = ECORE_Q_CMD_HALT;
|
|
rc = ecore_queue_state_change(sc, &q_params);
|
|
if (rc) {
|
|
return rc;
|
|
}
|
|
|
|
/* ...terminate the connection */
|
|
q_params.cmd = ECORE_Q_CMD_TERMINATE;
|
|
memset(&q_params.params.terminate, 0,
|
|
sizeof(q_params.params.terminate));
|
|
q_params.params.terminate.cid_index = FIRST_TX_COS_INDEX;
|
|
rc = ecore_queue_state_change(sc, &q_params);
|
|
if (rc) {
|
|
return rc;
|
|
}
|
|
|
|
/* ...delete cfc entry */
|
|
q_params.cmd = ECORE_Q_CMD_CFC_DEL;
|
|
memset(&q_params.params.cfc_del, 0, sizeof(q_params.params.cfc_del));
|
|
q_params.params.cfc_del.cid_index = FIRST_TX_COS_INDEX;
|
|
return ecore_queue_state_change(sc, &q_params);
|
|
}
|
|
|
|
/* wait for the outstanding SP commands */
|
|
static uint8_t bnx2x_wait_sp_comp(struct bnx2x_softc *sc, unsigned long mask)
|
|
{
|
|
unsigned long tmp;
|
|
int tout = 5000; /* wait for 5 secs tops */
|
|
|
|
while (tout--) {
|
|
mb();
|
|
if (!(atomic_load_acq_long(&sc->sp_state) & mask)) {
|
|
return TRUE;
|
|
}
|
|
|
|
DELAY(1000);
|
|
}
|
|
|
|
mb();
|
|
|
|
tmp = atomic_load_acq_long(&sc->sp_state);
|
|
if (tmp & mask) {
|
|
PMD_DRV_LOG(INFO, "Filtering completion timed out: "
|
|
"sp_state 0x%lx, mask 0x%lx", tmp, mask);
|
|
return FALSE;
|
|
}
|
|
|
|
return FALSE;
|
|
}
|
|
|
|
static int bnx2x_func_stop(struct bnx2x_softc *sc)
|
|
{
|
|
struct ecore_func_state_params func_params = { NULL };
|
|
int rc;
|
|
|
|
/* prepare parameters for function state transitions */
|
|
bnx2x_set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
|
|
func_params.f_obj = &sc->func_obj;
|
|
func_params.cmd = ECORE_F_CMD_STOP;
|
|
|
|
/*
|
|
* Try to stop the function the 'good way'. If it fails (in case
|
|
* of a parity error during bnx2x_chip_cleanup()) and we are
|
|
* not in a debug mode, perform a state transaction in order to
|
|
* enable further HW_RESET transaction.
|
|
*/
|
|
rc = ecore_func_state_change(sc, &func_params);
|
|
if (rc) {
|
|
PMD_DRV_LOG(NOTICE, "FUNC_STOP ramrod failed. "
|
|
"Running a dry transaction");
|
|
bnx2x_set_bit(RAMROD_DRV_CLR_ONLY, &func_params.ramrod_flags);
|
|
return ecore_func_state_change(sc, &func_params);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_reset_hw(struct bnx2x_softc *sc, uint32_t load_code)
|
|
{
|
|
struct ecore_func_state_params func_params = { NULL };
|
|
|
|
/* Prepare parameters for function state transitions */
|
|
bnx2x_set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
|
|
|
|
func_params.f_obj = &sc->func_obj;
|
|
func_params.cmd = ECORE_F_CMD_HW_RESET;
|
|
|
|
func_params.params.hw_init.load_phase = load_code;
|
|
|
|
return ecore_func_state_change(sc, &func_params);
|
|
}
|
|
|
|
static void bnx2x_int_disable_sync(struct bnx2x_softc *sc, int disable_hw)
|
|
{
|
|
if (disable_hw) {
|
|
/* prevent the HW from sending interrupts */
|
|
bnx2x_int_disable(sc);
|
|
}
|
|
}
|
|
|
|
static void
|
|
bnx2x_chip_cleanup(struct bnx2x_softc *sc, uint32_t unload_mode, uint8_t keep_link)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
struct ecore_mcast_ramrod_params rparam = { NULL };
|
|
uint32_t reset_code;
|
|
int i, rc = 0;
|
|
|
|
bnx2x_drain_tx_queues(sc);
|
|
|
|
/* give HW time to discard old tx messages */
|
|
DELAY(1000);
|
|
|
|
/* Clean all ETH MACs */
|
|
rc = bnx2x_del_all_macs(sc, &sc->sp_objs[0].mac_obj, ECORE_ETH_MAC,
|
|
FALSE);
|
|
if (rc < 0) {
|
|
PMD_DRV_LOG(NOTICE, "Failed to delete all ETH MACs (%d)", rc);
|
|
}
|
|
|
|
/* Clean up UC list */
|
|
rc = bnx2x_del_all_macs(sc, &sc->sp_objs[0].mac_obj, ECORE_UC_LIST_MAC,
|
|
TRUE);
|
|
if (rc < 0) {
|
|
PMD_DRV_LOG(NOTICE, "Failed to delete UC MACs list (%d)", rc);
|
|
}
|
|
|
|
/* Disable LLH */
|
|
REG_WR(sc, NIG_REG_LLH0_FUNC_EN + port * 8, 0);
|
|
|
|
/* Set "drop all" to stop Rx */
|
|
|
|
/*
|
|
* We need to take the if_maddr_lock() here in order to prevent
|
|
* a race between the completion code and this code.
|
|
*/
|
|
|
|
if (bnx2x_test_bit(ECORE_FILTER_RX_MODE_PENDING, &sc->sp_state)) {
|
|
bnx2x_set_bit(ECORE_FILTER_RX_MODE_SCHED, &sc->sp_state);
|
|
} else {
|
|
bnx2x_set_storm_rx_mode(sc);
|
|
}
|
|
|
|
/* Clean up multicast configuration */
|
|
rparam.mcast_obj = &sc->mcast_obj;
|
|
rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_DEL);
|
|
if (rc < 0) {
|
|
PMD_DRV_LOG(NOTICE,
|
|
"Failed to send DEL MCAST command (%d)", rc);
|
|
}
|
|
|
|
/*
|
|
* Send the UNLOAD_REQUEST to the MCP. This will return if
|
|
* this function should perform FUNCTION, PORT, or COMMON HW
|
|
* reset.
|
|
*/
|
|
reset_code = bnx2x_send_unload_req(sc, unload_mode);
|
|
|
|
/*
|
|
* (assumption: No Attention from MCP at this stage)
|
|
* PMF probably in the middle of TX disable/enable transaction
|
|
*/
|
|
rc = bnx2x_func_wait_started(sc);
|
|
if (rc) {
|
|
PMD_DRV_LOG(NOTICE, "bnx2x_func_wait_started failed");
|
|
}
|
|
|
|
/*
|
|
* Close multi and leading connections
|
|
* Completions for ramrods are collected in a synchronous way
|
|
*/
|
|
for (i = 0; i < sc->num_queues; i++) {
|
|
if (bnx2x_stop_queue(sc, i)) {
|
|
goto unload_error;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* If SP settings didn't get completed so far - something
|
|
* very wrong has happen.
|
|
*/
|
|
if (!bnx2x_wait_sp_comp(sc, ~0x0UL)) {
|
|
PMD_DRV_LOG(NOTICE, "Common slow path ramrods got stuck!");
|
|
}
|
|
|
|
unload_error:
|
|
|
|
rc = bnx2x_func_stop(sc);
|
|
if (rc) {
|
|
PMD_DRV_LOG(NOTICE, "Function stop failed!");
|
|
}
|
|
|
|
/* disable HW interrupts */
|
|
bnx2x_int_disable_sync(sc, TRUE);
|
|
|
|
/* Reset the chip */
|
|
rc = bnx2x_reset_hw(sc, reset_code);
|
|
if (rc) {
|
|
PMD_DRV_LOG(NOTICE, "Hardware reset failed");
|
|
}
|
|
|
|
/* Report UNLOAD_DONE to MCP */
|
|
bnx2x_send_unload_done(sc, keep_link);
|
|
}
|
|
|
|
static void bnx2x_disable_close_the_gate(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
|
|
PMD_DRV_LOG(DEBUG, "Disabling 'close the gates'");
|
|
|
|
val = REG_RD(sc, MISC_REG_AEU_GENERAL_MASK);
|
|
val &= ~(MISC_AEU_GENERAL_MASK_REG_AEU_PXP_CLOSE_MASK |
|
|
MISC_AEU_GENERAL_MASK_REG_AEU_NIG_CLOSE_MASK);
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_MASK, val);
|
|
}
|
|
|
|
/*
|
|
* Cleans the object that have internal lists without sending
|
|
* ramrods. Should be run when interrutps are disabled.
|
|
*/
|
|
static void bnx2x_squeeze_objects(struct bnx2x_softc *sc)
|
|
{
|
|
unsigned long ramrod_flags = 0, vlan_mac_flags = 0;
|
|
struct ecore_mcast_ramrod_params rparam = { NULL };
|
|
struct ecore_vlan_mac_obj *mac_obj = &sc->sp_objs->mac_obj;
|
|
int rc;
|
|
|
|
/* Cleanup MACs' object first... */
|
|
|
|
/* Wait for completion of requested */
|
|
bnx2x_set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
|
|
/* Perform a dry cleanup */
|
|
bnx2x_set_bit(RAMROD_DRV_CLR_ONLY, &ramrod_flags);
|
|
|
|
/* Clean ETH primary MAC */
|
|
bnx2x_set_bit(ECORE_ETH_MAC, &vlan_mac_flags);
|
|
rc = mac_obj->delete_all(sc, &sc->sp_objs->mac_obj, &vlan_mac_flags,
|
|
&ramrod_flags);
|
|
if (rc != 0) {
|
|
PMD_DRV_LOG(NOTICE, "Failed to clean ETH MACs (%d)", rc);
|
|
}
|
|
|
|
/* Cleanup UC list */
|
|
vlan_mac_flags = 0;
|
|
bnx2x_set_bit(ECORE_UC_LIST_MAC, &vlan_mac_flags);
|
|
rc = mac_obj->delete_all(sc, mac_obj, &vlan_mac_flags, &ramrod_flags);
|
|
if (rc != 0) {
|
|
PMD_DRV_LOG(NOTICE, "Failed to clean UC list MACs (%d)", rc);
|
|
}
|
|
|
|
/* Now clean mcast object... */
|
|
|
|
rparam.mcast_obj = &sc->mcast_obj;
|
|
bnx2x_set_bit(RAMROD_DRV_CLR_ONLY, &rparam.ramrod_flags);
|
|
|
|
/* Add a DEL command... */
|
|
rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_DEL);
|
|
if (rc < 0) {
|
|
PMD_DRV_LOG(NOTICE,
|
|
"Failed to send DEL MCAST command (%d)", rc);
|
|
}
|
|
|
|
/* now wait until all pending commands are cleared */
|
|
|
|
rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_CONT);
|
|
while (rc != 0) {
|
|
if (rc < 0) {
|
|
PMD_DRV_LOG(NOTICE,
|
|
"Failed to clean MCAST object (%d)", rc);
|
|
return;
|
|
}
|
|
|
|
rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_CONT);
|
|
}
|
|
}
|
|
|
|
/* stop the controller */
|
|
__attribute__ ((noinline))
|
|
int
|
|
bnx2x_nic_unload(struct bnx2x_softc *sc, uint32_t unload_mode, uint8_t keep_link)
|
|
{
|
|
uint8_t global = FALSE;
|
|
uint32_t val;
|
|
|
|
PMD_DRV_LOG(DEBUG, "Starting NIC unload...");
|
|
|
|
/* stop the periodic callout */
|
|
bnx2x_periodic_stop(sc);
|
|
|
|
/* mark driver as unloaded in shmem2 */
|
|
if (IS_PF(sc) && SHMEM2_HAS(sc, drv_capabilities_flag)) {
|
|
val = SHMEM2_RD(sc, drv_capabilities_flag[SC_FW_MB_IDX(sc)]);
|
|
SHMEM2_WR(sc, drv_capabilities_flag[SC_FW_MB_IDX(sc)],
|
|
val & ~DRV_FLAGS_CAPABILITIES_LOADED_L2);
|
|
}
|
|
|
|
if (IS_PF(sc) && sc->recovery_state != BNX2X_RECOVERY_DONE &&
|
|
(sc->state == BNX2X_STATE_CLOSED || sc->state == BNX2X_STATE_ERROR)) {
|
|
/*
|
|
* We can get here if the driver has been unloaded
|
|
* during parity error recovery and is either waiting for a
|
|
* leader to complete or for other functions to unload and
|
|
* then ifconfig down has been issued. In this case we want to
|
|
* unload and let other functions to complete a recovery
|
|
* process.
|
|
*/
|
|
sc->recovery_state = BNX2X_RECOVERY_DONE;
|
|
sc->is_leader = 0;
|
|
bnx2x_release_leader_lock(sc);
|
|
mb();
|
|
|
|
PMD_DRV_LOG(NOTICE, "Can't unload in closed or error state");
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* Nothing to do during unload if previous bnx2x_nic_load()
|
|
* did not completed succesfully - all resourses are released.
|
|
*/
|
|
if ((sc->state == BNX2X_STATE_CLOSED) || (sc->state == BNX2X_STATE_ERROR)) {
|
|
return 0;
|
|
}
|
|
|
|
sc->state = BNX2X_STATE_CLOSING_WAITING_HALT;
|
|
mb();
|
|
|
|
sc->rx_mode = BNX2X_RX_MODE_NONE;
|
|
bnx2x_set_rx_mode(sc);
|
|
mb();
|
|
|
|
if (IS_PF(sc)) {
|
|
/* set ALWAYS_ALIVE bit in shmem */
|
|
sc->fw_drv_pulse_wr_seq |= DRV_PULSE_ALWAYS_ALIVE;
|
|
|
|
bnx2x_drv_pulse(sc);
|
|
|
|
bnx2x_stats_handle(sc, STATS_EVENT_STOP);
|
|
bnx2x_save_statistics(sc);
|
|
}
|
|
|
|
/* wait till consumers catch up with producers in all queues */
|
|
bnx2x_drain_tx_queues(sc);
|
|
|
|
/* if VF indicate to PF this function is going down (PF will delete sp
|
|
* elements and clear initializations
|
|
*/
|
|
if (IS_VF(sc)) {
|
|
bnx2x_vf_unload(sc);
|
|
} else if (unload_mode != UNLOAD_RECOVERY) {
|
|
/* if this is a normal/close unload need to clean up chip */
|
|
bnx2x_chip_cleanup(sc, unload_mode, keep_link);
|
|
} else {
|
|
/* Send the UNLOAD_REQUEST to the MCP */
|
|
bnx2x_send_unload_req(sc, unload_mode);
|
|
|
|
/*
|
|
* Prevent transactions to host from the functions on the
|
|
* engine that doesn't reset global blocks in case of global
|
|
* attention once gloabl blocks are reset and gates are opened
|
|
* (the engine which leader will perform the recovery
|
|
* last).
|
|
*/
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
bnx2x_pf_disable(sc);
|
|
}
|
|
|
|
/* disable HW interrupts */
|
|
bnx2x_int_disable_sync(sc, TRUE);
|
|
|
|
/* Report UNLOAD_DONE to MCP */
|
|
bnx2x_send_unload_done(sc, FALSE);
|
|
}
|
|
|
|
/*
|
|
* At this stage no more interrupts will arrive so we may safely clean
|
|
* the queue'able objects here in case they failed to get cleaned so far.
|
|
*/
|
|
if (IS_PF(sc)) {
|
|
bnx2x_squeeze_objects(sc);
|
|
}
|
|
|
|
/* There should be no more pending SP commands at this stage */
|
|
sc->sp_state = 0;
|
|
|
|
sc->port.pmf = 0;
|
|
|
|
if (IS_PF(sc)) {
|
|
bnx2x_free_mem(sc);
|
|
}
|
|
|
|
bnx2x_free_fw_stats_mem(sc);
|
|
|
|
sc->state = BNX2X_STATE_CLOSED;
|
|
|
|
/*
|
|
* Check if there are pending parity attentions. If there are - set
|
|
* RECOVERY_IN_PROGRESS.
|
|
*/
|
|
if (IS_PF(sc) && bnx2x_chk_parity_attn(sc, &global, FALSE)) {
|
|
bnx2x_set_reset_in_progress(sc);
|
|
|
|
/* Set RESET_IS_GLOBAL if needed */
|
|
if (global) {
|
|
bnx2x_set_reset_global(sc);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* The last driver must disable a "close the gate" if there is no
|
|
* parity attention or "process kill" pending.
|
|
*/
|
|
if (IS_PF(sc) && !bnx2x_clear_pf_load(sc) &&
|
|
bnx2x_reset_is_done(sc, SC_PATH(sc))) {
|
|
bnx2x_disable_close_the_gate(sc);
|
|
}
|
|
|
|
PMD_DRV_LOG(DEBUG, "Ended NIC unload");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Encapsulte an mbuf cluster into the tx bd chain and makes the memory
|
|
* visible to the controller.
|
|
*
|
|
* If an mbuf is submitted to this routine and cannot be given to the
|
|
* controller (e.g. it has too many fragments) then the function may free
|
|
* the mbuf and return to the caller.
|
|
*
|
|
* Returns:
|
|
* int: Number of TX BDs used for the mbuf
|
|
*
|
|
* Note the side effect that an mbuf may be freed if it causes a problem.
|
|
*/
|
|
int bnx2x_tx_encap(struct bnx2x_tx_queue *txq, struct rte_mbuf *m0)
|
|
{
|
|
struct eth_tx_start_bd *tx_start_bd;
|
|
uint16_t bd_prod, pkt_prod;
|
|
struct bnx2x_softc *sc;
|
|
uint32_t nbds = 0;
|
|
|
|
sc = txq->sc;
|
|
bd_prod = txq->tx_bd_tail;
|
|
pkt_prod = txq->tx_pkt_tail;
|
|
|
|
txq->sw_ring[TX_BD(pkt_prod, txq)] = m0;
|
|
|
|
tx_start_bd = &txq->tx_ring[TX_BD(bd_prod, txq)].start_bd;
|
|
|
|
tx_start_bd->addr =
|
|
rte_cpu_to_le_64(rte_mbuf_data_dma_addr(m0));
|
|
tx_start_bd->nbytes = rte_cpu_to_le_16(m0->data_len);
|
|
tx_start_bd->bd_flags.as_bitfield = ETH_TX_BD_FLAGS_START_BD;
|
|
tx_start_bd->general_data =
|
|
(1 << ETH_TX_START_BD_HDR_NBDS_SHIFT);
|
|
|
|
tx_start_bd->nbd = rte_cpu_to_le_16(2);
|
|
|
|
if (m0->ol_flags & PKT_TX_VLAN_PKT) {
|
|
tx_start_bd->vlan_or_ethertype =
|
|
rte_cpu_to_le_16(m0->vlan_tci);
|
|
tx_start_bd->bd_flags.as_bitfield |=
|
|
(X_ETH_OUTBAND_VLAN <<
|
|
ETH_TX_BD_FLAGS_VLAN_MODE_SHIFT);
|
|
} else {
|
|
if (IS_PF(sc))
|
|
tx_start_bd->vlan_or_ethertype =
|
|
rte_cpu_to_le_16(pkt_prod);
|
|
else {
|
|
struct ether_hdr *eh =
|
|
rte_pktmbuf_mtod(m0, struct ether_hdr *);
|
|
|
|
tx_start_bd->vlan_or_ethertype =
|
|
rte_cpu_to_le_16(rte_be_to_cpu_16(eh->ether_type));
|
|
}
|
|
}
|
|
|
|
bd_prod = NEXT_TX_BD(bd_prod);
|
|
if (IS_VF(sc)) {
|
|
struct eth_tx_parse_bd_e2 *tx_parse_bd;
|
|
const struct ether_hdr *eh =
|
|
rte_pktmbuf_mtod(m0, struct ether_hdr *);
|
|
uint8_t mac_type = UNICAST_ADDRESS;
|
|
|
|
tx_parse_bd =
|
|
&txq->tx_ring[TX_BD(bd_prod, txq)].parse_bd_e2;
|
|
if (is_multicast_ether_addr(&eh->d_addr)) {
|
|
if (is_broadcast_ether_addr(&eh->d_addr))
|
|
mac_type = BROADCAST_ADDRESS;
|
|
else
|
|
mac_type = MULTICAST_ADDRESS;
|
|
}
|
|
tx_parse_bd->parsing_data =
|
|
(mac_type << ETH_TX_PARSE_BD_E2_ETH_ADDR_TYPE_SHIFT);
|
|
|
|
rte_memcpy(&tx_parse_bd->data.mac_addr.dst_hi,
|
|
&eh->d_addr.addr_bytes[0], 2);
|
|
rte_memcpy(&tx_parse_bd->data.mac_addr.dst_mid,
|
|
&eh->d_addr.addr_bytes[2], 2);
|
|
rte_memcpy(&tx_parse_bd->data.mac_addr.dst_lo,
|
|
&eh->d_addr.addr_bytes[4], 2);
|
|
rte_memcpy(&tx_parse_bd->data.mac_addr.src_hi,
|
|
&eh->s_addr.addr_bytes[0], 2);
|
|
rte_memcpy(&tx_parse_bd->data.mac_addr.src_mid,
|
|
&eh->s_addr.addr_bytes[2], 2);
|
|
rte_memcpy(&tx_parse_bd->data.mac_addr.src_lo,
|
|
&eh->s_addr.addr_bytes[4], 2);
|
|
|
|
tx_parse_bd->data.mac_addr.dst_hi =
|
|
rte_cpu_to_be_16(tx_parse_bd->data.mac_addr.dst_hi);
|
|
tx_parse_bd->data.mac_addr.dst_mid =
|
|
rte_cpu_to_be_16(tx_parse_bd->data.
|
|
mac_addr.dst_mid);
|
|
tx_parse_bd->data.mac_addr.dst_lo =
|
|
rte_cpu_to_be_16(tx_parse_bd->data.mac_addr.dst_lo);
|
|
tx_parse_bd->data.mac_addr.src_hi =
|
|
rte_cpu_to_be_16(tx_parse_bd->data.mac_addr.src_hi);
|
|
tx_parse_bd->data.mac_addr.src_mid =
|
|
rte_cpu_to_be_16(tx_parse_bd->data.
|
|
mac_addr.src_mid);
|
|
tx_parse_bd->data.mac_addr.src_lo =
|
|
rte_cpu_to_be_16(tx_parse_bd->data.mac_addr.src_lo);
|
|
|
|
PMD_TX_LOG(DEBUG,
|
|
"PBD dst %x %x %x src %x %x %x p_data %x",
|
|
tx_parse_bd->data.mac_addr.dst_hi,
|
|
tx_parse_bd->data.mac_addr.dst_mid,
|
|
tx_parse_bd->data.mac_addr.dst_lo,
|
|
tx_parse_bd->data.mac_addr.src_hi,
|
|
tx_parse_bd->data.mac_addr.src_mid,
|
|
tx_parse_bd->data.mac_addr.src_lo,
|
|
tx_parse_bd->parsing_data);
|
|
}
|
|
|
|
PMD_TX_LOG(DEBUG,
|
|
"start bd: nbytes %d flags %x vlan %x",
|
|
tx_start_bd->nbytes,
|
|
tx_start_bd->bd_flags.as_bitfield,
|
|
tx_start_bd->vlan_or_ethertype);
|
|
|
|
bd_prod = NEXT_TX_BD(bd_prod);
|
|
pkt_prod++;
|
|
|
|
if (TX_IDX(bd_prod) < 2)
|
|
nbds++;
|
|
|
|
txq->nb_tx_avail -= 2;
|
|
txq->tx_bd_tail = bd_prod;
|
|
txq->tx_pkt_tail = pkt_prod;
|
|
|
|
return nbds + 2;
|
|
}
|
|
|
|
static uint16_t bnx2x_cid_ilt_lines(struct bnx2x_softc *sc)
|
|
{
|
|
return L2_ILT_LINES(sc);
|
|
}
|
|
|
|
static void bnx2x_ilt_set_info(struct bnx2x_softc *sc)
|
|
{
|
|
struct ilt_client_info *ilt_client;
|
|
struct ecore_ilt *ilt = sc->ilt;
|
|
uint16_t line = 0;
|
|
|
|
PMD_INIT_FUNC_TRACE();
|
|
|
|
ilt->start_line = FUNC_ILT_BASE(SC_FUNC(sc));
|
|
|
|
/* CDU */
|
|
ilt_client = &ilt->clients[ILT_CLIENT_CDU];
|
|
ilt_client->client_num = ILT_CLIENT_CDU;
|
|
ilt_client->page_size = CDU_ILT_PAGE_SZ;
|
|
ilt_client->flags = ILT_CLIENT_SKIP_MEM;
|
|
ilt_client->start = line;
|
|
line += bnx2x_cid_ilt_lines(sc);
|
|
|
|
if (CNIC_SUPPORT(sc)) {
|
|
line += CNIC_ILT_LINES;
|
|
}
|
|
|
|
ilt_client->end = (line - 1);
|
|
|
|
/* QM */
|
|
if (QM_INIT(sc->qm_cid_count)) {
|
|
ilt_client = &ilt->clients[ILT_CLIENT_QM];
|
|
ilt_client->client_num = ILT_CLIENT_QM;
|
|
ilt_client->page_size = QM_ILT_PAGE_SZ;
|
|
ilt_client->flags = 0;
|
|
ilt_client->start = line;
|
|
|
|
/* 4 bytes for each cid */
|
|
line += DIV_ROUND_UP(sc->qm_cid_count * QM_QUEUES_PER_FUNC * 4,
|
|
QM_ILT_PAGE_SZ);
|
|
|
|
ilt_client->end = (line - 1);
|
|
}
|
|
|
|
if (CNIC_SUPPORT(sc)) {
|
|
/* SRC */
|
|
ilt_client = &ilt->clients[ILT_CLIENT_SRC];
|
|
ilt_client->client_num = ILT_CLIENT_SRC;
|
|
ilt_client->page_size = SRC_ILT_PAGE_SZ;
|
|
ilt_client->flags = 0;
|
|
ilt_client->start = line;
|
|
line += SRC_ILT_LINES;
|
|
ilt_client->end = (line - 1);
|
|
|
|
/* TM */
|
|
ilt_client = &ilt->clients[ILT_CLIENT_TM];
|
|
ilt_client->client_num = ILT_CLIENT_TM;
|
|
ilt_client->page_size = TM_ILT_PAGE_SZ;
|
|
ilt_client->flags = 0;
|
|
ilt_client->start = line;
|
|
line += TM_ILT_LINES;
|
|
ilt_client->end = (line - 1);
|
|
}
|
|
|
|
assert((line <= ILT_MAX_LINES));
|
|
}
|
|
|
|
static void bnx2x_set_fp_rx_buf_size(struct bnx2x_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < sc->num_queues; i++) {
|
|
/* get the Rx buffer size for RX frames */
|
|
sc->fp[i].rx_buf_size =
|
|
(IP_HEADER_ALIGNMENT_PADDING + ETH_OVERHEAD + sc->mtu);
|
|
}
|
|
}
|
|
|
|
int bnx2x_alloc_ilt_mem(struct bnx2x_softc *sc)
|
|
{
|
|
|
|
sc->ilt = rte_malloc("", sizeof(struct ecore_ilt), RTE_CACHE_LINE_SIZE);
|
|
|
|
return sc->ilt == NULL;
|
|
}
|
|
|
|
static int bnx2x_alloc_ilt_lines_mem(struct bnx2x_softc *sc)
|
|
{
|
|
sc->ilt->lines = rte_calloc("",
|
|
sizeof(struct ilt_line), ILT_MAX_LINES,
|
|
RTE_CACHE_LINE_SIZE);
|
|
return sc->ilt->lines == NULL;
|
|
}
|
|
|
|
void bnx2x_free_ilt_mem(struct bnx2x_softc *sc)
|
|
{
|
|
rte_free(sc->ilt);
|
|
sc->ilt = NULL;
|
|
}
|
|
|
|
static void bnx2x_free_ilt_lines_mem(struct bnx2x_softc *sc)
|
|
{
|
|
if (sc->ilt->lines != NULL) {
|
|
rte_free(sc->ilt->lines);
|
|
sc->ilt->lines = NULL;
|
|
}
|
|
}
|
|
|
|
static void bnx2x_free_mem(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t i;
|
|
|
|
for (i = 0; i < L2_ILT_LINES(sc); i++) {
|
|
sc->context[i].vcxt = NULL;
|
|
sc->context[i].size = 0;
|
|
}
|
|
|
|
ecore_ilt_mem_op(sc, ILT_MEMOP_FREE);
|
|
|
|
bnx2x_free_ilt_lines_mem(sc);
|
|
}
|
|
|
|
static int bnx2x_alloc_mem(struct bnx2x_softc *sc)
|
|
{
|
|
int context_size;
|
|
int allocated;
|
|
int i;
|
|
char cdu_name[RTE_MEMZONE_NAMESIZE];
|
|
|
|
/*
|
|
* Allocate memory for CDU context:
|
|
* This memory is allocated separately and not in the generic ILT
|
|
* functions because CDU differs in few aspects:
|
|
* 1. There can be multiple entities allocating memory for context -
|
|
* regular L2, CNIC, and SRIOV drivers. Each separately controls
|
|
* its own ILT lines.
|
|
* 2. Since CDU page-size is not a single 4KB page (which is the case
|
|
* for the other ILT clients), to be efficient we want to support
|
|
* allocation of sub-page-size in the last entry.
|
|
* 3. Context pointers are used by the driver to pass to FW / update
|
|
* the context (for the other ILT clients the pointers are used just to
|
|
* free the memory during unload).
|
|
*/
|
|
context_size = (sizeof(union cdu_context) * BNX2X_L2_CID_COUNT(sc));
|
|
for (i = 0, allocated = 0; allocated < context_size; i++) {
|
|
sc->context[i].size = min(CDU_ILT_PAGE_SZ,
|
|
(context_size - allocated));
|
|
|
|
snprintf(cdu_name, sizeof(cdu_name), "cdu_%d", i);
|
|
if (bnx2x_dma_alloc(sc, sc->context[i].size,
|
|
&sc->context[i].vcxt_dma,
|
|
cdu_name, BNX2X_PAGE_SIZE) != 0) {
|
|
bnx2x_free_mem(sc);
|
|
return -1;
|
|
}
|
|
|
|
sc->context[i].vcxt =
|
|
(union cdu_context *)sc->context[i].vcxt_dma.vaddr;
|
|
|
|
allocated += sc->context[i].size;
|
|
}
|
|
|
|
bnx2x_alloc_ilt_lines_mem(sc);
|
|
|
|
if (ecore_ilt_mem_op(sc, ILT_MEMOP_ALLOC)) {
|
|
PMD_DRV_LOG(NOTICE, "ecore_ilt_mem_op ILT_MEMOP_ALLOC failed");
|
|
bnx2x_free_mem(sc);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bnx2x_free_fw_stats_mem(struct bnx2x_softc *sc)
|
|
{
|
|
sc->fw_stats_num = 0;
|
|
|
|
sc->fw_stats_req_size = 0;
|
|
sc->fw_stats_req = NULL;
|
|
sc->fw_stats_req_mapping = 0;
|
|
|
|
sc->fw_stats_data_size = 0;
|
|
sc->fw_stats_data = NULL;
|
|
sc->fw_stats_data_mapping = 0;
|
|
}
|
|
|
|
static int bnx2x_alloc_fw_stats_mem(struct bnx2x_softc *sc)
|
|
{
|
|
uint8_t num_queue_stats;
|
|
int num_groups, vf_headroom = 0;
|
|
|
|
/* number of queues for statistics is number of eth queues */
|
|
num_queue_stats = BNX2X_NUM_ETH_QUEUES(sc);
|
|
|
|
/*
|
|
* Total number of FW statistics requests =
|
|
* 1 for port stats + 1 for PF stats + num of queues
|
|
*/
|
|
sc->fw_stats_num = (2 + num_queue_stats);
|
|
|
|
/*
|
|
* Request is built from stats_query_header and an array of
|
|
* stats_query_cmd_group each of which contains STATS_QUERY_CMD_COUNT
|
|
* rules. The real number or requests is configured in the
|
|
* stats_query_header.
|
|
*/
|
|
num_groups = (sc->fw_stats_num + vf_headroom) / STATS_QUERY_CMD_COUNT;
|
|
if ((sc->fw_stats_num + vf_headroom) % STATS_QUERY_CMD_COUNT)
|
|
num_groups++;
|
|
|
|
sc->fw_stats_req_size =
|
|
(sizeof(struct stats_query_header) +
|
|
(num_groups * sizeof(struct stats_query_cmd_group)));
|
|
|
|
/*
|
|
* Data for statistics requests + stats_counter.
|
|
* stats_counter holds per-STORM counters that are incremented when
|
|
* STORM has finished with the current request. Memory for FCoE
|
|
* offloaded statistics are counted anyway, even if they will not be sent.
|
|
* VF stats are not accounted for here as the data of VF stats is stored
|
|
* in memory allocated by the VF, not here.
|
|
*/
|
|
sc->fw_stats_data_size =
|
|
(sizeof(struct stats_counter) +
|
|
sizeof(struct per_port_stats) + sizeof(struct per_pf_stats) +
|
|
/* sizeof(struct fcoe_statistics_params) + */
|
|
(sizeof(struct per_queue_stats) * num_queue_stats));
|
|
|
|
if (bnx2x_dma_alloc(sc, (sc->fw_stats_req_size + sc->fw_stats_data_size),
|
|
&sc->fw_stats_dma, "fw_stats",
|
|
RTE_CACHE_LINE_SIZE) != 0) {
|
|
bnx2x_free_fw_stats_mem(sc);
|
|
return -1;
|
|
}
|
|
|
|
/* set up the shortcuts */
|
|
|
|
sc->fw_stats_req = (struct bnx2x_fw_stats_req *)sc->fw_stats_dma.vaddr;
|
|
sc->fw_stats_req_mapping = sc->fw_stats_dma.paddr;
|
|
|
|
sc->fw_stats_data =
|
|
(struct bnx2x_fw_stats_data *)((uint8_t *) sc->fw_stats_dma.vaddr +
|
|
sc->fw_stats_req_size);
|
|
sc->fw_stats_data_mapping = (sc->fw_stats_dma.paddr +
|
|
sc->fw_stats_req_size);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Bits map:
|
|
* 0-7 - Engine0 load counter.
|
|
* 8-15 - Engine1 load counter.
|
|
* 16 - Engine0 RESET_IN_PROGRESS bit.
|
|
* 17 - Engine1 RESET_IN_PROGRESS bit.
|
|
* 18 - Engine0 ONE_IS_LOADED. Set when there is at least one active
|
|
* function on the engine
|
|
* 19 - Engine1 ONE_IS_LOADED.
|
|
* 20 - Chip reset flow bit. When set none-leader must wait for both engines
|
|
* leader to complete (check for both RESET_IN_PROGRESS bits and not
|
|
* for just the one belonging to its engine).
|
|
*/
|
|
#define BNX2X_RECOVERY_GLOB_REG MISC_REG_GENERIC_POR_1
|
|
#define BNX2X_PATH0_LOAD_CNT_MASK 0x000000ff
|
|
#define BNX2X_PATH0_LOAD_CNT_SHIFT 0
|
|
#define BNX2X_PATH1_LOAD_CNT_MASK 0x0000ff00
|
|
#define BNX2X_PATH1_LOAD_CNT_SHIFT 8
|
|
#define BNX2X_PATH0_RST_IN_PROG_BIT 0x00010000
|
|
#define BNX2X_PATH1_RST_IN_PROG_BIT 0x00020000
|
|
#define BNX2X_GLOBAL_RESET_BIT 0x00040000
|
|
|
|
/* set the GLOBAL_RESET bit, should be run under rtnl lock */
|
|
static void bnx2x_set_reset_global(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
|
|
val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
|
|
REG_WR(sc, BNX2X_RECOVERY_GLOB_REG, val | BNX2X_GLOBAL_RESET_BIT);
|
|
bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
|
|
}
|
|
|
|
/* clear the GLOBAL_RESET bit, should be run under rtnl lock */
|
|
static void bnx2x_clear_reset_global(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
|
|
val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
|
|
REG_WR(sc, BNX2X_RECOVERY_GLOB_REG, val & (~BNX2X_GLOBAL_RESET_BIT));
|
|
bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
|
|
}
|
|
|
|
/* checks the GLOBAL_RESET bit, should be run under rtnl lock */
|
|
static uint8_t bnx2x_reset_is_global(struct bnx2x_softc *sc)
|
|
{
|
|
return REG_RD(sc, BNX2X_RECOVERY_GLOB_REG) & BNX2X_GLOBAL_RESET_BIT;
|
|
}
|
|
|
|
/* clear RESET_IN_PROGRESS bit for the engine, should be run under rtnl lock */
|
|
static void bnx2x_set_reset_done(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
uint32_t bit = SC_PATH(sc) ? BNX2X_PATH1_RST_IN_PROG_BIT :
|
|
BNX2X_PATH0_RST_IN_PROG_BIT;
|
|
|
|
bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
|
|
|
|
val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
|
|
/* Clear the bit */
|
|
val &= ~bit;
|
|
REG_WR(sc, BNX2X_RECOVERY_GLOB_REG, val);
|
|
|
|
bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
|
|
}
|
|
|
|
/* set RESET_IN_PROGRESS for the engine, should be run under rtnl lock */
|
|
static void bnx2x_set_reset_in_progress(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
uint32_t bit = SC_PATH(sc) ? BNX2X_PATH1_RST_IN_PROG_BIT :
|
|
BNX2X_PATH0_RST_IN_PROG_BIT;
|
|
|
|
bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
|
|
|
|
val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
|
|
/* Set the bit */
|
|
val |= bit;
|
|
REG_WR(sc, BNX2X_RECOVERY_GLOB_REG, val);
|
|
|
|
bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
|
|
}
|
|
|
|
/* check RESET_IN_PROGRESS bit for an engine, should be run under rtnl lock */
|
|
static uint8_t bnx2x_reset_is_done(struct bnx2x_softc *sc, int engine)
|
|
{
|
|
uint32_t val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
|
|
uint32_t bit = engine ? BNX2X_PATH1_RST_IN_PROG_BIT :
|
|
BNX2X_PATH0_RST_IN_PROG_BIT;
|
|
|
|
/* return false if bit is set */
|
|
return (val & bit) ? FALSE : TRUE;
|
|
}
|
|
|
|
/* get the load status for an engine, should be run under rtnl lock */
|
|
static uint8_t bnx2x_get_load_status(struct bnx2x_softc *sc, int engine)
|
|
{
|
|
uint32_t mask = engine ? BNX2X_PATH1_LOAD_CNT_MASK :
|
|
BNX2X_PATH0_LOAD_CNT_MASK;
|
|
uint32_t shift = engine ? BNX2X_PATH1_LOAD_CNT_SHIFT :
|
|
BNX2X_PATH0_LOAD_CNT_SHIFT;
|
|
uint32_t val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
|
|
|
|
val = ((val & mask) >> shift);
|
|
|
|
return val != 0;
|
|
}
|
|
|
|
/* set pf load mark */
|
|
static void bnx2x_set_pf_load(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
uint32_t val1;
|
|
uint32_t mask = SC_PATH(sc) ? BNX2X_PATH1_LOAD_CNT_MASK :
|
|
BNX2X_PATH0_LOAD_CNT_MASK;
|
|
uint32_t shift = SC_PATH(sc) ? BNX2X_PATH1_LOAD_CNT_SHIFT :
|
|
BNX2X_PATH0_LOAD_CNT_SHIFT;
|
|
|
|
bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
|
|
|
|
PMD_INIT_FUNC_TRACE();
|
|
|
|
val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
|
|
|
|
/* get the current counter value */
|
|
val1 = ((val & mask) >> shift);
|
|
|
|
/* set bit of this PF */
|
|
val1 |= (1 << SC_ABS_FUNC(sc));
|
|
|
|
/* clear the old value */
|
|
val &= ~mask;
|
|
|
|
/* set the new one */
|
|
val |= ((val1 << shift) & mask);
|
|
|
|
REG_WR(sc, BNX2X_RECOVERY_GLOB_REG, val);
|
|
|
|
bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
|
|
}
|
|
|
|
/* clear pf load mark */
|
|
static uint8_t bnx2x_clear_pf_load(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t val1, val;
|
|
uint32_t mask = SC_PATH(sc) ? BNX2X_PATH1_LOAD_CNT_MASK :
|
|
BNX2X_PATH0_LOAD_CNT_MASK;
|
|
uint32_t shift = SC_PATH(sc) ? BNX2X_PATH1_LOAD_CNT_SHIFT :
|
|
BNX2X_PATH0_LOAD_CNT_SHIFT;
|
|
|
|
bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
|
|
val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
|
|
|
|
/* get the current counter value */
|
|
val1 = (val & mask) >> shift;
|
|
|
|
/* clear bit of that PF */
|
|
val1 &= ~(1 << SC_ABS_FUNC(sc));
|
|
|
|
/* clear the old value */
|
|
val &= ~mask;
|
|
|
|
/* set the new one */
|
|
val |= ((val1 << shift) & mask);
|
|
|
|
REG_WR(sc, BNX2X_RECOVERY_GLOB_REG, val);
|
|
bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
|
|
return val1 != 0;
|
|
}
|
|
|
|
/* send load requrest to mcp and analyze response */
|
|
static int bnx2x_nic_load_request(struct bnx2x_softc *sc, uint32_t * load_code)
|
|
{
|
|
PMD_INIT_FUNC_TRACE();
|
|
|
|
/* init fw_seq */
|
|
sc->fw_seq =
|
|
(SHMEM_RD(sc, func_mb[SC_FW_MB_IDX(sc)].drv_mb_header) &
|
|
DRV_MSG_SEQ_NUMBER_MASK);
|
|
|
|
PMD_DRV_LOG(DEBUG, "initial fw_seq 0x%04x", sc->fw_seq);
|
|
|
|
#ifdef BNX2X_PULSE
|
|
/* get the current FW pulse sequence */
|
|
sc->fw_drv_pulse_wr_seq =
|
|
(SHMEM_RD(sc, func_mb[SC_FW_MB_IDX(sc)].drv_pulse_mb) &
|
|
DRV_PULSE_SEQ_MASK);
|
|
#else
|
|
/* set ALWAYS_ALIVE bit in shmem */
|
|
sc->fw_drv_pulse_wr_seq |= DRV_PULSE_ALWAYS_ALIVE;
|
|
bnx2x_drv_pulse(sc);
|
|
#endif
|
|
|
|
/* load request */
|
|
(*load_code) = bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_REQ,
|
|
DRV_MSG_CODE_LOAD_REQ_WITH_LFA);
|
|
|
|
/* if the MCP fails to respond we must abort */
|
|
if (!(*load_code)) {
|
|
PMD_DRV_LOG(NOTICE, "MCP response failure!");
|
|
return -1;
|
|
}
|
|
|
|
/* if MCP refused then must abort */
|
|
if ((*load_code) == FW_MSG_CODE_DRV_LOAD_REFUSED) {
|
|
PMD_DRV_LOG(NOTICE, "MCP refused load request");
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Check whether another PF has already loaded FW to chip. In virtualized
|
|
* environments a pf from anoth VM may have already initialized the device
|
|
* including loading FW.
|
|
*/
|
|
static int bnx2x_nic_load_analyze_req(struct bnx2x_softc *sc, uint32_t load_code)
|
|
{
|
|
uint32_t my_fw, loaded_fw;
|
|
|
|
/* is another pf loaded on this engine? */
|
|
if ((load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) &&
|
|
(load_code != FW_MSG_CODE_DRV_LOAD_COMMON)) {
|
|
/* build my FW version dword */
|
|
my_fw = (BNX2X_5710_FW_MAJOR_VERSION +
|
|
(BNX2X_5710_FW_MINOR_VERSION << 8) +
|
|
(BNX2X_5710_FW_REVISION_VERSION << 16) +
|
|
(BNX2X_5710_FW_ENGINEERING_VERSION << 24));
|
|
|
|
/* read loaded FW from chip */
|
|
loaded_fw = REG_RD(sc, XSEM_REG_PRAM);
|
|
PMD_DRV_LOG(DEBUG, "loaded FW 0x%08x / my FW 0x%08x",
|
|
loaded_fw, my_fw);
|
|
|
|
/* abort nic load if version mismatch */
|
|
if (my_fw != loaded_fw) {
|
|
PMD_DRV_LOG(NOTICE,
|
|
"FW 0x%08x already loaded (mine is 0x%08x)",
|
|
loaded_fw, my_fw);
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* mark PMF if applicable */
|
|
static void bnx2x_nic_load_pmf(struct bnx2x_softc *sc, uint32_t load_code)
|
|
{
|
|
uint32_t ncsi_oem_data_addr;
|
|
|
|
PMD_INIT_FUNC_TRACE();
|
|
|
|
if ((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) ||
|
|
(load_code == FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) ||
|
|
(load_code == FW_MSG_CODE_DRV_LOAD_PORT)) {
|
|
/*
|
|
* Barrier here for ordering between the writing to sc->port.pmf here
|
|
* and reading it from the periodic task.
|
|
*/
|
|
sc->port.pmf = 1;
|
|
mb();
|
|
} else {
|
|
sc->port.pmf = 0;
|
|
}
|
|
|
|
PMD_DRV_LOG(DEBUG, "pmf %d", sc->port.pmf);
|
|
|
|
if (load_code == FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) {
|
|
if (SHMEM2_HAS(sc, ncsi_oem_data_addr)) {
|
|
ncsi_oem_data_addr = SHMEM2_RD(sc, ncsi_oem_data_addr);
|
|
if (ncsi_oem_data_addr) {
|
|
REG_WR(sc,
|
|
(ncsi_oem_data_addr +
|
|
offsetof(struct glob_ncsi_oem_data,
|
|
driver_version)), 0);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static void bnx2x_read_mf_cfg(struct bnx2x_softc *sc)
|
|
{
|
|
int n = (CHIP_IS_MODE_4_PORT(sc) ? 2 : 1);
|
|
int abs_func;
|
|
int vn;
|
|
|
|
if (BNX2X_NOMCP(sc)) {
|
|
return; /* what should be the default bvalue in this case */
|
|
}
|
|
|
|
/*
|
|
* The formula for computing the absolute function number is...
|
|
* For 2 port configuration (4 functions per port):
|
|
* abs_func = 2 * vn + SC_PORT + SC_PATH
|
|
* For 4 port configuration (2 functions per port):
|
|
* abs_func = 4 * vn + 2 * SC_PORT + SC_PATH
|
|
*/
|
|
for (vn = VN_0; vn < SC_MAX_VN_NUM(sc); vn++) {
|
|
abs_func = (n * (2 * vn + SC_PORT(sc)) + SC_PATH(sc));
|
|
if (abs_func >= E1H_FUNC_MAX) {
|
|
break;
|
|
}
|
|
sc->devinfo.mf_info.mf_config[vn] =
|
|
MFCFG_RD(sc, func_mf_config[abs_func].config);
|
|
}
|
|
|
|
if (sc->devinfo.mf_info.mf_config[SC_VN(sc)] &
|
|
FUNC_MF_CFG_FUNC_DISABLED) {
|
|
PMD_DRV_LOG(DEBUG, "mf_cfg function disabled");
|
|
sc->flags |= BNX2X_MF_FUNC_DIS;
|
|
} else {
|
|
PMD_DRV_LOG(DEBUG, "mf_cfg function enabled");
|
|
sc->flags &= ~BNX2X_MF_FUNC_DIS;
|
|
}
|
|
}
|
|
|
|
/* acquire split MCP access lock register */
|
|
static int bnx2x_acquire_alr(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t j, val;
|
|
|
|
for (j = 0; j < 1000; j++) {
|
|
val = (1UL << 31);
|
|
REG_WR(sc, GRCBASE_MCP + 0x9c, val);
|
|
val = REG_RD(sc, GRCBASE_MCP + 0x9c);
|
|
if (val & (1L << 31))
|
|
break;
|
|
|
|
DELAY(5000);
|
|
}
|
|
|
|
if (!(val & (1L << 31))) {
|
|
PMD_DRV_LOG(NOTICE, "Cannot acquire MCP access lock register");
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* release split MCP access lock register */
|
|
static void bnx2x_release_alr(struct bnx2x_softc *sc)
|
|
{
|
|
REG_WR(sc, GRCBASE_MCP + 0x9c, 0);
|
|
}
|
|
|
|
static void bnx2x_fan_failure(struct bnx2x_softc *sc)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
uint32_t ext_phy_config;
|
|
|
|
/* mark the failure */
|
|
ext_phy_config =
|
|
SHMEM_RD(sc, dev_info.port_hw_config[port].external_phy_config);
|
|
|
|
ext_phy_config &= ~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK;
|
|
ext_phy_config |= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE;
|
|
SHMEM_WR(sc, dev_info.port_hw_config[port].external_phy_config,
|
|
ext_phy_config);
|
|
|
|
/* log the failure */
|
|
PMD_DRV_LOG(INFO,
|
|
"Fan Failure has caused the driver to shutdown "
|
|
"the card to prevent permanent damage. "
|
|
"Please contact OEM Support for assistance");
|
|
|
|
rte_panic("Schedule task to handle fan failure");
|
|
}
|
|
|
|
/* this function is called upon a link interrupt */
|
|
static void bnx2x_link_attn(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t pause_enabled = 0;
|
|
struct host_port_stats *pstats;
|
|
int cmng_fns;
|
|
|
|
/* Make sure that we are synced with the current statistics */
|
|
bnx2x_stats_handle(sc, STATS_EVENT_STOP);
|
|
|
|
elink_link_update(&sc->link_params, &sc->link_vars);
|
|
|
|
if (sc->link_vars.link_up) {
|
|
|
|
/* dropless flow control */
|
|
if (sc->dropless_fc) {
|
|
pause_enabled = 0;
|
|
|
|
if (sc->link_vars.flow_ctrl & ELINK_FLOW_CTRL_TX) {
|
|
pause_enabled = 1;
|
|
}
|
|
|
|
REG_WR(sc,
|
|
(BAR_USTRORM_INTMEM +
|
|
USTORM_ETH_PAUSE_ENABLED_OFFSET(SC_PORT(sc))),
|
|
pause_enabled);
|
|
}
|
|
|
|
if (sc->link_vars.mac_type != ELINK_MAC_TYPE_EMAC) {
|
|
pstats = BNX2X_SP(sc, port_stats);
|
|
/* reset old mac stats */
|
|
memset(&(pstats->mac_stx[0]), 0,
|
|
sizeof(struct mac_stx));
|
|
}
|
|
|
|
if (sc->state == BNX2X_STATE_OPEN) {
|
|
bnx2x_stats_handle(sc, STATS_EVENT_LINK_UP);
|
|
}
|
|
}
|
|
|
|
if (sc->link_vars.link_up && sc->link_vars.line_speed) {
|
|
cmng_fns = bnx2x_get_cmng_fns_mode(sc);
|
|
|
|
if (cmng_fns != CMNG_FNS_NONE) {
|
|
bnx2x_cmng_fns_init(sc, FALSE, cmng_fns);
|
|
storm_memset_cmng(sc, &sc->cmng, SC_PORT(sc));
|
|
}
|
|
}
|
|
|
|
bnx2x_link_report(sc);
|
|
|
|
if (IS_MF(sc)) {
|
|
bnx2x_link_sync_notify(sc);
|
|
}
|
|
}
|
|
|
|
static void bnx2x_attn_int_asserted(struct bnx2x_softc *sc, uint32_t asserted)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
uint32_t aeu_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
|
|
MISC_REG_AEU_MASK_ATTN_FUNC_0;
|
|
uint32_t nig_int_mask_addr = port ? NIG_REG_MASK_INTERRUPT_PORT1 :
|
|
NIG_REG_MASK_INTERRUPT_PORT0;
|
|
uint32_t aeu_mask;
|
|
uint32_t nig_mask = 0;
|
|
uint32_t reg_addr;
|
|
uint32_t igu_acked;
|
|
uint32_t cnt;
|
|
|
|
if (sc->attn_state & asserted) {
|
|
PMD_DRV_LOG(ERR, "IGU ERROR attn=0x%08x", asserted);
|
|
}
|
|
|
|
bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
|
|
|
|
aeu_mask = REG_RD(sc, aeu_addr);
|
|
|
|
aeu_mask &= ~(asserted & 0x3ff);
|
|
|
|
REG_WR(sc, aeu_addr, aeu_mask);
|
|
|
|
bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
|
|
|
|
sc->attn_state |= asserted;
|
|
|
|
if (asserted & ATTN_HARD_WIRED_MASK) {
|
|
if (asserted & ATTN_NIG_FOR_FUNC) {
|
|
|
|
/* save nig interrupt mask */
|
|
nig_mask = REG_RD(sc, nig_int_mask_addr);
|
|
|
|
/* If nig_mask is not set, no need to call the update function */
|
|
if (nig_mask) {
|
|
REG_WR(sc, nig_int_mask_addr, 0);
|
|
|
|
bnx2x_link_attn(sc);
|
|
}
|
|
|
|
/* handle unicore attn? */
|
|
}
|
|
|
|
if (asserted & ATTN_SW_TIMER_4_FUNC) {
|
|
PMD_DRV_LOG(DEBUG, "ATTN_SW_TIMER_4_FUNC!");
|
|
}
|
|
|
|
if (asserted & GPIO_2_FUNC) {
|
|
PMD_DRV_LOG(DEBUG, "GPIO_2_FUNC!");
|
|
}
|
|
|
|
if (asserted & GPIO_3_FUNC) {
|
|
PMD_DRV_LOG(DEBUG, "GPIO_3_FUNC!");
|
|
}
|
|
|
|
if (asserted & GPIO_4_FUNC) {
|
|
PMD_DRV_LOG(DEBUG, "GPIO_4_FUNC!");
|
|
}
|
|
|
|
if (port == 0) {
|
|
if (asserted & ATTN_GENERAL_ATTN_1) {
|
|
PMD_DRV_LOG(DEBUG, "ATTN_GENERAL_ATTN_1!");
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_1, 0x0);
|
|
}
|
|
if (asserted & ATTN_GENERAL_ATTN_2) {
|
|
PMD_DRV_LOG(DEBUG, "ATTN_GENERAL_ATTN_2!");
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_2, 0x0);
|
|
}
|
|
if (asserted & ATTN_GENERAL_ATTN_3) {
|
|
PMD_DRV_LOG(DEBUG, "ATTN_GENERAL_ATTN_3!");
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_3, 0x0);
|
|
}
|
|
} else {
|
|
if (asserted & ATTN_GENERAL_ATTN_4) {
|
|
PMD_DRV_LOG(DEBUG, "ATTN_GENERAL_ATTN_4!");
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_4, 0x0);
|
|
}
|
|
if (asserted & ATTN_GENERAL_ATTN_5) {
|
|
PMD_DRV_LOG(DEBUG, "ATTN_GENERAL_ATTN_5!");
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_5, 0x0);
|
|
}
|
|
if (asserted & ATTN_GENERAL_ATTN_6) {
|
|
PMD_DRV_LOG(DEBUG, "ATTN_GENERAL_ATTN_6!");
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_6, 0x0);
|
|
}
|
|
}
|
|
}
|
|
/* hardwired */
|
|
if (sc->devinfo.int_block == INT_BLOCK_HC) {
|
|
reg_addr =
|
|
(HC_REG_COMMAND_REG + port * 32 +
|
|
COMMAND_REG_ATTN_BITS_SET);
|
|
} else {
|
|
reg_addr = (BAR_IGU_INTMEM + IGU_CMD_ATTN_BIT_SET_UPPER * 8);
|
|
}
|
|
|
|
PMD_DRV_LOG(DEBUG, "about to mask 0x%08x at %s addr 0x%08x",
|
|
asserted,
|
|
(sc->devinfo.int_block == INT_BLOCK_HC) ? "HC" : "IGU",
|
|
reg_addr);
|
|
REG_WR(sc, reg_addr, asserted);
|
|
|
|
/* now set back the mask */
|
|
if (asserted & ATTN_NIG_FOR_FUNC) {
|
|
/*
|
|
* Verify that IGU ack through BAR was written before restoring
|
|
* NIG mask. This loop should exit after 2-3 iterations max.
|
|
*/
|
|
if (sc->devinfo.int_block != INT_BLOCK_HC) {
|
|
cnt = 0;
|
|
|
|
do {
|
|
igu_acked =
|
|
REG_RD(sc, IGU_REG_ATTENTION_ACK_BITS);
|
|
} while (((igu_acked & ATTN_NIG_FOR_FUNC) == 0)
|
|
&& (++cnt < MAX_IGU_ATTN_ACK_TO));
|
|
|
|
if (!igu_acked) {
|
|
PMD_DRV_LOG(ERR,
|
|
"Failed to verify IGU ack on time");
|
|
}
|
|
|
|
mb();
|
|
}
|
|
|
|
REG_WR(sc, nig_int_mask_addr, nig_mask);
|
|
|
|
}
|
|
}
|
|
|
|
static void
|
|
bnx2x_print_next_block(__rte_unused struct bnx2x_softc *sc, __rte_unused int idx,
|
|
__rte_unused const char *blk)
|
|
{
|
|
PMD_DRV_LOG(INFO, "%s%s", idx ? ", " : "", blk);
|
|
}
|
|
|
|
static int
|
|
bnx2x_check_blocks_with_parity0(struct bnx2x_softc *sc, uint32_t sig, int par_num,
|
|
uint8_t print)
|
|
{
|
|
uint32_t cur_bit = 0;
|
|
int i = 0;
|
|
|
|
for (i = 0; sig; i++) {
|
|
cur_bit = ((uint32_t) 0x1 << i);
|
|
if (sig & cur_bit) {
|
|
switch (cur_bit) {
|
|
case AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"BRB");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"PARSER");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"TSDM");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"SEARCHER");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"TCM");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"TSEMI");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"XPB");
|
|
break;
|
|
}
|
|
|
|
/* Clear the bit */
|
|
sig &= ~cur_bit;
|
|
}
|
|
}
|
|
|
|
return par_num;
|
|
}
|
|
|
|
static int
|
|
bnx2x_check_blocks_with_parity1(struct bnx2x_softc *sc, uint32_t sig, int par_num,
|
|
uint8_t * global, uint8_t print)
|
|
{
|
|
int i = 0;
|
|
uint32_t cur_bit = 0;
|
|
for (i = 0; sig; i++) {
|
|
cur_bit = ((uint32_t) 0x1 << i);
|
|
if (sig & cur_bit) {
|
|
switch (cur_bit) {
|
|
case AEU_INPUTS_ATTN_BITS_PBF_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"PBF");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"QM");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_TIMERS_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"TM");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"XSDM");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_XCM_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"XCM");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"XSEMI");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"DOORBELLQ");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_NIG_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"NIG");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"VAUX PCI CORE");
|
|
*global = TRUE;
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"DEBUG");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"USDM");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_UCM_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"UCM");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"USEMI");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"UPB");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"CSDM");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"CCM");
|
|
break;
|
|
}
|
|
|
|
/* Clear the bit */
|
|
sig &= ~cur_bit;
|
|
}
|
|
}
|
|
|
|
return par_num;
|
|
}
|
|
|
|
static int
|
|
bnx2x_check_blocks_with_parity2(struct bnx2x_softc *sc, uint32_t sig, int par_num,
|
|
uint8_t print)
|
|
{
|
|
uint32_t cur_bit = 0;
|
|
int i = 0;
|
|
|
|
for (i = 0; sig; i++) {
|
|
cur_bit = ((uint32_t) 0x1 << i);
|
|
if (sig & cur_bit) {
|
|
switch (cur_bit) {
|
|
case AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"CSEMI");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"PXP");
|
|
break;
|
|
case AEU_IN_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"PXPPCICLOCKCLIENT");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"CFC");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"CDU");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"DMAE");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"IGU");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"MISC");
|
|
break;
|
|
}
|
|
|
|
/* Clear the bit */
|
|
sig &= ~cur_bit;
|
|
}
|
|
}
|
|
|
|
return par_num;
|
|
}
|
|
|
|
static int
|
|
bnx2x_check_blocks_with_parity3(struct bnx2x_softc *sc, uint32_t sig, int par_num,
|
|
uint8_t * global, uint8_t print)
|
|
{
|
|
uint32_t cur_bit = 0;
|
|
int i = 0;
|
|
|
|
for (i = 0; sig; i++) {
|
|
cur_bit = ((uint32_t) 0x1 << i);
|
|
if (sig & cur_bit) {
|
|
switch (cur_bit) {
|
|
case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"MCP ROM");
|
|
*global = TRUE;
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"MCP UMP RX");
|
|
*global = TRUE;
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"MCP UMP TX");
|
|
*global = TRUE;
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"MCP SCPAD");
|
|
*global = TRUE;
|
|
break;
|
|
}
|
|
|
|
/* Clear the bit */
|
|
sig &= ~cur_bit;
|
|
}
|
|
}
|
|
|
|
return par_num;
|
|
}
|
|
|
|
static int
|
|
bnx2x_check_blocks_with_parity4(struct bnx2x_softc *sc, uint32_t sig, int par_num,
|
|
uint8_t print)
|
|
{
|
|
uint32_t cur_bit = 0;
|
|
int i = 0;
|
|
|
|
for (i = 0; sig; i++) {
|
|
cur_bit = ((uint32_t) 0x1 << i);
|
|
if (sig & cur_bit) {
|
|
switch (cur_bit) {
|
|
case AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"PGLUE_B");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"ATC");
|
|
break;
|
|
}
|
|
|
|
/* Clear the bit */
|
|
sig &= ~cur_bit;
|
|
}
|
|
}
|
|
|
|
return par_num;
|
|
}
|
|
|
|
static uint8_t
|
|
bnx2x_parity_attn(struct bnx2x_softc *sc, uint8_t * global, uint8_t print,
|
|
uint32_t * sig)
|
|
{
|
|
int par_num = 0;
|
|
|
|
if ((sig[0] & HW_PRTY_ASSERT_SET_0) ||
|
|
(sig[1] & HW_PRTY_ASSERT_SET_1) ||
|
|
(sig[2] & HW_PRTY_ASSERT_SET_2) ||
|
|
(sig[3] & HW_PRTY_ASSERT_SET_3) ||
|
|
(sig[4] & HW_PRTY_ASSERT_SET_4)) {
|
|
PMD_DRV_LOG(ERR,
|
|
"Parity error: HW block parity attention:"
|
|
"[0]:0x%08x [1]:0x%08x [2]:0x%08x [3]:0x%08x [4]:0x%08x",
|
|
(uint32_t) (sig[0] & HW_PRTY_ASSERT_SET_0),
|
|
(uint32_t) (sig[1] & HW_PRTY_ASSERT_SET_1),
|
|
(uint32_t) (sig[2] & HW_PRTY_ASSERT_SET_2),
|
|
(uint32_t) (sig[3] & HW_PRTY_ASSERT_SET_3),
|
|
(uint32_t) (sig[4] & HW_PRTY_ASSERT_SET_4));
|
|
|
|
if (print)
|
|
PMD_DRV_LOG(INFO, "Parity errors detected in blocks: ");
|
|
|
|
par_num =
|
|
bnx2x_check_blocks_with_parity0(sc, sig[0] &
|
|
HW_PRTY_ASSERT_SET_0,
|
|
par_num, print);
|
|
par_num =
|
|
bnx2x_check_blocks_with_parity1(sc, sig[1] &
|
|
HW_PRTY_ASSERT_SET_1,
|
|
par_num, global, print);
|
|
par_num =
|
|
bnx2x_check_blocks_with_parity2(sc, sig[2] &
|
|
HW_PRTY_ASSERT_SET_2,
|
|
par_num, print);
|
|
par_num =
|
|
bnx2x_check_blocks_with_parity3(sc, sig[3] &
|
|
HW_PRTY_ASSERT_SET_3,
|
|
par_num, global, print);
|
|
par_num =
|
|
bnx2x_check_blocks_with_parity4(sc, sig[4] &
|
|
HW_PRTY_ASSERT_SET_4,
|
|
par_num, print);
|
|
|
|
if (print)
|
|
PMD_DRV_LOG(INFO, "");
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
return FALSE;
|
|
}
|
|
|
|
static uint8_t
|
|
bnx2x_chk_parity_attn(struct bnx2x_softc *sc, uint8_t * global, uint8_t print)
|
|
{
|
|
struct attn_route attn = { {0} };
|
|
int port = SC_PORT(sc);
|
|
|
|
attn.sig[0] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + port * 4);
|
|
attn.sig[1] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 + port * 4);
|
|
attn.sig[2] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 + port * 4);
|
|
attn.sig[3] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 + port * 4);
|
|
|
|
if (!CHIP_IS_E1x(sc))
|
|
attn.sig[4] =
|
|
REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 + port * 4);
|
|
|
|
return bnx2x_parity_attn(sc, global, print, attn.sig);
|
|
}
|
|
|
|
static void bnx2x_attn_int_deasserted4(struct bnx2x_softc *sc, uint32_t attn)
|
|
{
|
|
uint32_t val;
|
|
|
|
if (attn & AEU_INPUTS_ATTN_BITS_PGLUE_HW_INTERRUPT) {
|
|
val = REG_RD(sc, PGLUE_B_REG_PGLUE_B_INT_STS_CLR);
|
|
PMD_DRV_LOG(INFO, "ERROR: PGLUE hw attention 0x%08x", val);
|
|
if (val & PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR)
|
|
PMD_DRV_LOG(INFO,
|
|
"ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR");
|
|
if (val & PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR)
|
|
PMD_DRV_LOG(INFO,
|
|
"ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR");
|
|
if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN)
|
|
PMD_DRV_LOG(INFO,
|
|
"ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN");
|
|
if (val & PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN)
|
|
PMD_DRV_LOG(INFO,
|
|
"ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN");
|
|
if (val &
|
|
PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN)
|
|
PMD_DRV_LOG(INFO,
|
|
"ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN");
|
|
if (val &
|
|
PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN)
|
|
PMD_DRV_LOG(INFO,
|
|
"ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN");
|
|
if (val & PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN)
|
|
PMD_DRV_LOG(INFO,
|
|
"ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN");
|
|
if (val & PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN)
|
|
PMD_DRV_LOG(INFO,
|
|
"ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN");
|
|
if (val & PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW)
|
|
PMD_DRV_LOG(INFO,
|
|
"ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW");
|
|
}
|
|
|
|
if (attn & AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT) {
|
|
val = REG_RD(sc, ATC_REG_ATC_INT_STS_CLR);
|
|
PMD_DRV_LOG(INFO, "ERROR: ATC hw attention 0x%08x", val);
|
|
if (val & ATC_ATC_INT_STS_REG_ADDRESS_ERROR)
|
|
PMD_DRV_LOG(INFO,
|
|
"ERROR: ATC_ATC_INT_STS_REG_ADDRESS_ERROR");
|
|
if (val & ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND)
|
|
PMD_DRV_LOG(INFO,
|
|
"ERROR: ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND");
|
|
if (val & ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS)
|
|
PMD_DRV_LOG(INFO,
|
|
"ERROR: ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS");
|
|
if (val & ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT)
|
|
PMD_DRV_LOG(INFO,
|
|
"ERROR: ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT");
|
|
if (val & ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR)
|
|
PMD_DRV_LOG(INFO,
|
|
"ERROR: ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR");
|
|
if (val & ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU)
|
|
PMD_DRV_LOG(INFO,
|
|
"ERROR: ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU");
|
|
}
|
|
|
|
if (attn & (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR |
|
|
AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR)) {
|
|
PMD_DRV_LOG(INFO,
|
|
"ERROR: FATAL parity attention set4 0x%08x",
|
|
(uint32_t) (attn &
|
|
(AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR
|
|
|
|
|
AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR)));
|
|
}
|
|
}
|
|
|
|
static void bnx2x_e1h_disable(struct bnx2x_softc *sc)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
|
|
REG_WR(sc, NIG_REG_LLH0_FUNC_EN + port * 8, 0);
|
|
}
|
|
|
|
static void bnx2x_e1h_enable(struct bnx2x_softc *sc)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
|
|
REG_WR(sc, NIG_REG_LLH0_FUNC_EN + port * 8, 1);
|
|
}
|
|
|
|
/*
|
|
* called due to MCP event (on pmf):
|
|
* reread new bandwidth configuration
|
|
* configure FW
|
|
* notify others function about the change
|
|
*/
|
|
static void bnx2x_config_mf_bw(struct bnx2x_softc *sc)
|
|
{
|
|
if (sc->link_vars.link_up) {
|
|
bnx2x_cmng_fns_init(sc, TRUE, CMNG_FNS_MINMAX);
|
|
bnx2x_link_sync_notify(sc);
|
|
}
|
|
|
|
storm_memset_cmng(sc, &sc->cmng, SC_PORT(sc));
|
|
}
|
|
|
|
static void bnx2x_set_mf_bw(struct bnx2x_softc *sc)
|
|
{
|
|
bnx2x_config_mf_bw(sc);
|
|
bnx2x_fw_command(sc, DRV_MSG_CODE_SET_MF_BW_ACK, 0);
|
|
}
|
|
|
|
static void bnx2x_handle_eee_event(struct bnx2x_softc *sc)
|
|
{
|
|
bnx2x_fw_command(sc, DRV_MSG_CODE_EEE_RESULTS_ACK, 0);
|
|
}
|
|
|
|
#define DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED 3
|
|
|
|
static void bnx2x_drv_info_ether_stat(struct bnx2x_softc *sc)
|
|
{
|
|
struct eth_stats_info *ether_stat = &sc->sp->drv_info_to_mcp.ether_stat;
|
|
|
|
strncpy(ether_stat->version, BNX2X_DRIVER_VERSION,
|
|
ETH_STAT_INFO_VERSION_LEN);
|
|
|
|
sc->sp_objs[0].mac_obj.get_n_elements(sc, &sc->sp_objs[0].mac_obj,
|
|
DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED,
|
|
ether_stat->mac_local + MAC_PAD,
|
|
MAC_PAD, ETH_ALEN);
|
|
|
|
ether_stat->mtu_size = sc->mtu;
|
|
|
|
ether_stat->feature_flags |= FEATURE_ETH_CHKSUM_OFFLOAD_MASK;
|
|
ether_stat->promiscuous_mode = 0; // (flags & PROMISC) ? 1 : 0;
|
|
|
|
ether_stat->txq_size = sc->tx_ring_size;
|
|
ether_stat->rxq_size = sc->rx_ring_size;
|
|
}
|
|
|
|
static void bnx2x_handle_drv_info_req(struct bnx2x_softc *sc)
|
|
{
|
|
enum drv_info_opcode op_code;
|
|
uint32_t drv_info_ctl = SHMEM2_RD(sc, drv_info_control);
|
|
|
|
/* if drv_info version supported by MFW doesn't match - send NACK */
|
|
if ((drv_info_ctl & DRV_INFO_CONTROL_VER_MASK) != DRV_INFO_CUR_VER) {
|
|
bnx2x_fw_command(sc, DRV_MSG_CODE_DRV_INFO_NACK, 0);
|
|
return;
|
|
}
|
|
|
|
op_code = ((drv_info_ctl & DRV_INFO_CONTROL_OP_CODE_MASK) >>
|
|
DRV_INFO_CONTROL_OP_CODE_SHIFT);
|
|
|
|
memset(&sc->sp->drv_info_to_mcp, 0, sizeof(union drv_info_to_mcp));
|
|
|
|
switch (op_code) {
|
|
case ETH_STATS_OPCODE:
|
|
bnx2x_drv_info_ether_stat(sc);
|
|
break;
|
|
case FCOE_STATS_OPCODE:
|
|
case ISCSI_STATS_OPCODE:
|
|
default:
|
|
/* if op code isn't supported - send NACK */
|
|
bnx2x_fw_command(sc, DRV_MSG_CODE_DRV_INFO_NACK, 0);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* If we got drv_info attn from MFW then these fields are defined in
|
|
* shmem2 for sure
|
|
*/
|
|
SHMEM2_WR(sc, drv_info_host_addr_lo,
|
|
U64_LO(BNX2X_SP_MAPPING(sc, drv_info_to_mcp)));
|
|
SHMEM2_WR(sc, drv_info_host_addr_hi,
|
|
U64_HI(BNX2X_SP_MAPPING(sc, drv_info_to_mcp)));
|
|
|
|
bnx2x_fw_command(sc, DRV_MSG_CODE_DRV_INFO_ACK, 0);
|
|
}
|
|
|
|
static void bnx2x_dcc_event(struct bnx2x_softc *sc, uint32_t dcc_event)
|
|
{
|
|
if (dcc_event & DRV_STATUS_DCC_DISABLE_ENABLE_PF) {
|
|
/*
|
|
* This is the only place besides the function initialization
|
|
* where the sc->flags can change so it is done without any
|
|
* locks
|
|
*/
|
|
if (sc->devinfo.
|
|
mf_info.mf_config[SC_VN(sc)] & FUNC_MF_CFG_FUNC_DISABLED) {
|
|
PMD_DRV_LOG(DEBUG, "mf_cfg function disabled");
|
|
sc->flags |= BNX2X_MF_FUNC_DIS;
|
|
bnx2x_e1h_disable(sc);
|
|
} else {
|
|
PMD_DRV_LOG(DEBUG, "mf_cfg function enabled");
|
|
sc->flags &= ~BNX2X_MF_FUNC_DIS;
|
|
bnx2x_e1h_enable(sc);
|
|
}
|
|
dcc_event &= ~DRV_STATUS_DCC_DISABLE_ENABLE_PF;
|
|
}
|
|
|
|
if (dcc_event & DRV_STATUS_DCC_BANDWIDTH_ALLOCATION) {
|
|
bnx2x_config_mf_bw(sc);
|
|
dcc_event &= ~DRV_STATUS_DCC_BANDWIDTH_ALLOCATION;
|
|
}
|
|
|
|
/* Report results to MCP */
|
|
if (dcc_event)
|
|
bnx2x_fw_command(sc, DRV_MSG_CODE_DCC_FAILURE, 0);
|
|
else
|
|
bnx2x_fw_command(sc, DRV_MSG_CODE_DCC_OK, 0);
|
|
}
|
|
|
|
static void bnx2x_pmf_update(struct bnx2x_softc *sc)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
uint32_t val;
|
|
|
|
sc->port.pmf = 1;
|
|
|
|
/*
|
|
* We need the mb() to ensure the ordering between the writing to
|
|
* sc->port.pmf here and reading it from the bnx2x_periodic_task().
|
|
*/
|
|
mb();
|
|
|
|
/* enable nig attention */
|
|
val = (0xff0f | (1 << (SC_VN(sc) + 4)));
|
|
if (sc->devinfo.int_block == INT_BLOCK_HC) {
|
|
REG_WR(sc, HC_REG_TRAILING_EDGE_0 + port * 8, val);
|
|
REG_WR(sc, HC_REG_LEADING_EDGE_0 + port * 8, val);
|
|
} else if (!CHIP_IS_E1x(sc)) {
|
|
REG_WR(sc, IGU_REG_TRAILING_EDGE_LATCH, val);
|
|
REG_WR(sc, IGU_REG_LEADING_EDGE_LATCH, val);
|
|
}
|
|
|
|
bnx2x_stats_handle(sc, STATS_EVENT_PMF);
|
|
}
|
|
|
|
static int bnx2x_mc_assert(struct bnx2x_softc *sc)
|
|
{
|
|
char last_idx;
|
|
int i, rc = 0;
|
|
__rte_unused uint32_t row0, row1, row2, row3;
|
|
|
|
/* XSTORM */
|
|
last_idx =
|
|
REG_RD8(sc, BAR_XSTRORM_INTMEM + XSTORM_ASSERT_LIST_INDEX_OFFSET);
|
|
if (last_idx)
|
|
PMD_DRV_LOG(ERR, "XSTORM_ASSERT_LIST_INDEX 0x%x", last_idx);
|
|
|
|
/* print the asserts */
|
|
for (i = 0; i < STORM_ASSERT_ARRAY_SIZE; i++) {
|
|
|
|
row0 =
|
|
REG_RD(sc,
|
|
BAR_XSTRORM_INTMEM + XSTORM_ASSERT_LIST_OFFSET(i));
|
|
row1 =
|
|
REG_RD(sc,
|
|
BAR_XSTRORM_INTMEM + XSTORM_ASSERT_LIST_OFFSET(i) +
|
|
4);
|
|
row2 =
|
|
REG_RD(sc,
|
|
BAR_XSTRORM_INTMEM + XSTORM_ASSERT_LIST_OFFSET(i) +
|
|
8);
|
|
row3 =
|
|
REG_RD(sc,
|
|
BAR_XSTRORM_INTMEM + XSTORM_ASSERT_LIST_OFFSET(i) +
|
|
12);
|
|
|
|
if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
|
|
PMD_DRV_LOG(ERR,
|
|
"XSTORM_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x",
|
|
i, row3, row2, row1, row0);
|
|
rc++;
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* TSTORM */
|
|
last_idx =
|
|
REG_RD8(sc, BAR_TSTRORM_INTMEM + TSTORM_ASSERT_LIST_INDEX_OFFSET);
|
|
if (last_idx) {
|
|
PMD_DRV_LOG(ERR, "TSTORM_ASSERT_LIST_INDEX 0x%x", last_idx);
|
|
}
|
|
|
|
/* print the asserts */
|
|
for (i = 0; i < STORM_ASSERT_ARRAY_SIZE; i++) {
|
|
|
|
row0 =
|
|
REG_RD(sc,
|
|
BAR_TSTRORM_INTMEM + TSTORM_ASSERT_LIST_OFFSET(i));
|
|
row1 =
|
|
REG_RD(sc,
|
|
BAR_TSTRORM_INTMEM + TSTORM_ASSERT_LIST_OFFSET(i) +
|
|
4);
|
|
row2 =
|
|
REG_RD(sc,
|
|
BAR_TSTRORM_INTMEM + TSTORM_ASSERT_LIST_OFFSET(i) +
|
|
8);
|
|
row3 =
|
|
REG_RD(sc,
|
|
BAR_TSTRORM_INTMEM + TSTORM_ASSERT_LIST_OFFSET(i) +
|
|
12);
|
|
|
|
if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
|
|
PMD_DRV_LOG(ERR,
|
|
"TSTORM_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x",
|
|
i, row3, row2, row1, row0);
|
|
rc++;
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* CSTORM */
|
|
last_idx =
|
|
REG_RD8(sc, BAR_CSTRORM_INTMEM + CSTORM_ASSERT_LIST_INDEX_OFFSET);
|
|
if (last_idx) {
|
|
PMD_DRV_LOG(ERR, "CSTORM_ASSERT_LIST_INDEX 0x%x", last_idx);
|
|
}
|
|
|
|
/* print the asserts */
|
|
for (i = 0; i < STORM_ASSERT_ARRAY_SIZE; i++) {
|
|
|
|
row0 =
|
|
REG_RD(sc,
|
|
BAR_CSTRORM_INTMEM + CSTORM_ASSERT_LIST_OFFSET(i));
|
|
row1 =
|
|
REG_RD(sc,
|
|
BAR_CSTRORM_INTMEM + CSTORM_ASSERT_LIST_OFFSET(i) +
|
|
4);
|
|
row2 =
|
|
REG_RD(sc,
|
|
BAR_CSTRORM_INTMEM + CSTORM_ASSERT_LIST_OFFSET(i) +
|
|
8);
|
|
row3 =
|
|
REG_RD(sc,
|
|
BAR_CSTRORM_INTMEM + CSTORM_ASSERT_LIST_OFFSET(i) +
|
|
12);
|
|
|
|
if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
|
|
PMD_DRV_LOG(ERR,
|
|
"CSTORM_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x",
|
|
i, row3, row2, row1, row0);
|
|
rc++;
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* USTORM */
|
|
last_idx =
|
|
REG_RD8(sc, BAR_USTRORM_INTMEM + USTORM_ASSERT_LIST_INDEX_OFFSET);
|
|
if (last_idx) {
|
|
PMD_DRV_LOG(ERR, "USTORM_ASSERT_LIST_INDEX 0x%x", last_idx);
|
|
}
|
|
|
|
/* print the asserts */
|
|
for (i = 0; i < STORM_ASSERT_ARRAY_SIZE; i++) {
|
|
|
|
row0 =
|
|
REG_RD(sc,
|
|
BAR_USTRORM_INTMEM + USTORM_ASSERT_LIST_OFFSET(i));
|
|
row1 =
|
|
REG_RD(sc,
|
|
BAR_USTRORM_INTMEM + USTORM_ASSERT_LIST_OFFSET(i) +
|
|
4);
|
|
row2 =
|
|
REG_RD(sc,
|
|
BAR_USTRORM_INTMEM + USTORM_ASSERT_LIST_OFFSET(i) +
|
|
8);
|
|
row3 =
|
|
REG_RD(sc,
|
|
BAR_USTRORM_INTMEM + USTORM_ASSERT_LIST_OFFSET(i) +
|
|
12);
|
|
|
|
if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
|
|
PMD_DRV_LOG(ERR,
|
|
"USTORM_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x",
|
|
i, row3, row2, row1, row0);
|
|
rc++;
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void bnx2x_attn_int_deasserted3(struct bnx2x_softc *sc, uint32_t attn)
|
|
{
|
|
int func = SC_FUNC(sc);
|
|
uint32_t val;
|
|
|
|
if (attn & EVEREST_GEN_ATTN_IN_USE_MASK) {
|
|
|
|
if (attn & BNX2X_PMF_LINK_ASSERT(sc)) {
|
|
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_12 + func * 4, 0);
|
|
bnx2x_read_mf_cfg(sc);
|
|
sc->devinfo.mf_info.mf_config[SC_VN(sc)] =
|
|
MFCFG_RD(sc,
|
|
func_mf_config[SC_ABS_FUNC(sc)].config);
|
|
val =
|
|
SHMEM_RD(sc, func_mb[SC_FW_MB_IDX(sc)].drv_status);
|
|
|
|
if (val & DRV_STATUS_DCC_EVENT_MASK)
|
|
bnx2x_dcc_event(sc,
|
|
(val &
|
|
DRV_STATUS_DCC_EVENT_MASK));
|
|
|
|
if (val & DRV_STATUS_SET_MF_BW)
|
|
bnx2x_set_mf_bw(sc);
|
|
|
|
if (val & DRV_STATUS_DRV_INFO_REQ)
|
|
bnx2x_handle_drv_info_req(sc);
|
|
|
|
if ((sc->port.pmf == 0) && (val & DRV_STATUS_PMF))
|
|
bnx2x_pmf_update(sc);
|
|
|
|
if (val & DRV_STATUS_EEE_NEGOTIATION_RESULTS)
|
|
bnx2x_handle_eee_event(sc);
|
|
|
|
if (sc->link_vars.periodic_flags &
|
|
ELINK_PERIODIC_FLAGS_LINK_EVENT) {
|
|
/* sync with link */
|
|
sc->link_vars.periodic_flags &=
|
|
~ELINK_PERIODIC_FLAGS_LINK_EVENT;
|
|
if (IS_MF(sc)) {
|
|
bnx2x_link_sync_notify(sc);
|
|
}
|
|
bnx2x_link_report(sc);
|
|
}
|
|
|
|
/*
|
|
* Always call it here: bnx2x_link_report() will
|
|
* prevent the link indication duplication.
|
|
*/
|
|
bnx2x_link_status_update(sc);
|
|
|
|
} else if (attn & BNX2X_MC_ASSERT_BITS) {
|
|
|
|
PMD_DRV_LOG(ERR, "MC assert!");
|
|
bnx2x_mc_assert(sc);
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_10, 0);
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_9, 0);
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_8, 0);
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_7, 0);
|
|
rte_panic("MC assert!");
|
|
|
|
} else if (attn & BNX2X_MCP_ASSERT) {
|
|
|
|
PMD_DRV_LOG(ERR, "MCP assert!");
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_11, 0);
|
|
|
|
} else {
|
|
PMD_DRV_LOG(ERR,
|
|
"Unknown HW assert! (attn 0x%08x)", attn);
|
|
}
|
|
}
|
|
|
|
if (attn & EVEREST_LATCHED_ATTN_IN_USE_MASK) {
|
|
PMD_DRV_LOG(ERR, "LATCHED attention 0x%08x (masked)", attn);
|
|
if (attn & BNX2X_GRC_TIMEOUT) {
|
|
val = REG_RD(sc, MISC_REG_GRC_TIMEOUT_ATTN);
|
|
PMD_DRV_LOG(ERR, "GRC time-out 0x%08x", val);
|
|
}
|
|
if (attn & BNX2X_GRC_RSV) {
|
|
val = REG_RD(sc, MISC_REG_GRC_RSV_ATTN);
|
|
PMD_DRV_LOG(ERR, "GRC reserved 0x%08x", val);
|
|
}
|
|
REG_WR(sc, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0x7ff);
|
|
}
|
|
}
|
|
|
|
static void bnx2x_attn_int_deasserted2(struct bnx2x_softc *sc, uint32_t attn)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
int reg_offset;
|
|
uint32_t val0, mask0, val1, mask1;
|
|
uint32_t val;
|
|
|
|
if (attn & AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT) {
|
|
val = REG_RD(sc, CFC_REG_CFC_INT_STS_CLR);
|
|
PMD_DRV_LOG(ERR, "CFC hw attention 0x%08x", val);
|
|
/* CFC error attention */
|
|
if (val & 0x2) {
|
|
PMD_DRV_LOG(ERR, "FATAL error from CFC");
|
|
}
|
|
}
|
|
|
|
if (attn & AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT) {
|
|
val = REG_RD(sc, PXP_REG_PXP_INT_STS_CLR_0);
|
|
PMD_DRV_LOG(ERR, "PXP hw attention-0 0x%08x", val);
|
|
/* RQ_USDMDP_FIFO_OVERFLOW */
|
|
if (val & 0x18000) {
|
|
PMD_DRV_LOG(ERR, "FATAL error from PXP");
|
|
}
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
val = REG_RD(sc, PXP_REG_PXP_INT_STS_CLR_1);
|
|
PMD_DRV_LOG(ERR, "PXP hw attention-1 0x%08x", val);
|
|
}
|
|
}
|
|
#define PXP2_EOP_ERROR_BIT PXP2_PXP2_INT_STS_CLR_0_REG_WR_PGLUE_EOP_ERROR
|
|
#define AEU_PXP2_HW_INT_BIT AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_HW_INTERRUPT
|
|
|
|
if (attn & AEU_PXP2_HW_INT_BIT) {
|
|
/* CQ47854 workaround do not panic on
|
|
* PXP2_PXP2_INT_STS_0_REG_WR_PGLUE_EOP_ERROR
|
|
*/
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
mask0 = REG_RD(sc, PXP2_REG_PXP2_INT_MASK_0);
|
|
val1 = REG_RD(sc, PXP2_REG_PXP2_INT_STS_1);
|
|
mask1 = REG_RD(sc, PXP2_REG_PXP2_INT_MASK_1);
|
|
val0 = REG_RD(sc, PXP2_REG_PXP2_INT_STS_0);
|
|
/*
|
|
* If the olny PXP2_EOP_ERROR_BIT is set in
|
|
* STS0 and STS1 - clear it
|
|
*
|
|
* probably we lose additional attentions between
|
|
* STS0 and STS_CLR0, in this case user will not
|
|
* be notified about them
|
|
*/
|
|
if (val0 & mask0 & PXP2_EOP_ERROR_BIT &&
|
|
!(val1 & mask1))
|
|
val0 = REG_RD(sc, PXP2_REG_PXP2_INT_STS_CLR_0);
|
|
|
|
/* print the register, since no one can restore it */
|
|
PMD_DRV_LOG(ERR,
|
|
"PXP2_REG_PXP2_INT_STS_CLR_0 0x%08x", val0);
|
|
|
|
/*
|
|
* if PXP2_PXP2_INT_STS_0_REG_WR_PGLUE_EOP_ERROR
|
|
* then notify
|
|
*/
|
|
if (val0 & PXP2_EOP_ERROR_BIT) {
|
|
PMD_DRV_LOG(ERR, "PXP2_WR_PGLUE_EOP_ERROR");
|
|
|
|
/*
|
|
* if only PXP2_PXP2_INT_STS_0_REG_WR_PGLUE_EOP_ERROR is
|
|
* set then clear attention from PXP2 block without panic
|
|
*/
|
|
if (((val0 & mask0) == PXP2_EOP_ERROR_BIT) &&
|
|
((val1 & mask1) == 0))
|
|
attn &= ~AEU_PXP2_HW_INT_BIT;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (attn & HW_INTERRUT_ASSERT_SET_2) {
|
|
reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_2 :
|
|
MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2);
|
|
|
|
val = REG_RD(sc, reg_offset);
|
|
val &= ~(attn & HW_INTERRUT_ASSERT_SET_2);
|
|
REG_WR(sc, reg_offset, val);
|
|
|
|
PMD_DRV_LOG(ERR,
|
|
"FATAL HW block attention set2 0x%x",
|
|
(uint32_t) (attn & HW_INTERRUT_ASSERT_SET_2));
|
|
rte_panic("HW block attention set2");
|
|
}
|
|
}
|
|
|
|
static void bnx2x_attn_int_deasserted1(struct bnx2x_softc *sc, uint32_t attn)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
int reg_offset;
|
|
uint32_t val;
|
|
|
|
if (attn & AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT) {
|
|
val = REG_RD(sc, DORQ_REG_DORQ_INT_STS_CLR);
|
|
PMD_DRV_LOG(ERR, "DB hw attention 0x%08x", val);
|
|
/* DORQ discard attention */
|
|
if (val & 0x2) {
|
|
PMD_DRV_LOG(ERR, "FATAL error from DORQ");
|
|
}
|
|
}
|
|
|
|
if (attn & HW_INTERRUT_ASSERT_SET_1) {
|
|
reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1 :
|
|
MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1);
|
|
|
|
val = REG_RD(sc, reg_offset);
|
|
val &= ~(attn & HW_INTERRUT_ASSERT_SET_1);
|
|
REG_WR(sc, reg_offset, val);
|
|
|
|
PMD_DRV_LOG(ERR,
|
|
"FATAL HW block attention set1 0x%08x",
|
|
(uint32_t) (attn & HW_INTERRUT_ASSERT_SET_1));
|
|
rte_panic("HW block attention set1");
|
|
}
|
|
}
|
|
|
|
static void bnx2x_attn_int_deasserted0(struct bnx2x_softc *sc, uint32_t attn)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
int reg_offset;
|
|
uint32_t val;
|
|
|
|
reg_offset = (port) ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
|
|
MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0;
|
|
|
|
if (attn & AEU_INPUTS_ATTN_BITS_SPIO5) {
|
|
val = REG_RD(sc, reg_offset);
|
|
val &= ~AEU_INPUTS_ATTN_BITS_SPIO5;
|
|
REG_WR(sc, reg_offset, val);
|
|
|
|
PMD_DRV_LOG(WARNING, "SPIO5 hw attention");
|
|
|
|
/* Fan failure attention */
|
|
elink_hw_reset_phy(&sc->link_params);
|
|
bnx2x_fan_failure(sc);
|
|
}
|
|
|
|
if ((attn & sc->link_vars.aeu_int_mask) && sc->port.pmf) {
|
|
elink_handle_module_detect_int(&sc->link_params);
|
|
}
|
|
|
|
if (attn & HW_INTERRUT_ASSERT_SET_0) {
|
|
val = REG_RD(sc, reg_offset);
|
|
val &= ~(attn & HW_INTERRUT_ASSERT_SET_0);
|
|
REG_WR(sc, reg_offset, val);
|
|
|
|
rte_panic("FATAL HW block attention set0 0x%lx",
|
|
(attn & HW_INTERRUT_ASSERT_SET_0));
|
|
}
|
|
}
|
|
|
|
static void bnx2x_attn_int_deasserted(struct bnx2x_softc *sc, uint32_t deasserted)
|
|
{
|
|
struct attn_route attn;
|
|
struct attn_route *group_mask;
|
|
int port = SC_PORT(sc);
|
|
int index;
|
|
uint32_t reg_addr;
|
|
uint32_t val;
|
|
uint32_t aeu_mask;
|
|
uint8_t global = FALSE;
|
|
|
|
/*
|
|
* Need to take HW lock because MCP or other port might also
|
|
* try to handle this event.
|
|
*/
|
|
bnx2x_acquire_alr(sc);
|
|
|
|
if (bnx2x_chk_parity_attn(sc, &global, TRUE)) {
|
|
sc->recovery_state = BNX2X_RECOVERY_INIT;
|
|
|
|
/* disable HW interrupts */
|
|
bnx2x_int_disable(sc);
|
|
bnx2x_release_alr(sc);
|
|
return;
|
|
}
|
|
|
|
attn.sig[0] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + port * 4);
|
|
attn.sig[1] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 + port * 4);
|
|
attn.sig[2] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 + port * 4);
|
|
attn.sig[3] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 + port * 4);
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
attn.sig[4] =
|
|
REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 + port * 4);
|
|
} else {
|
|
attn.sig[4] = 0;
|
|
}
|
|
|
|
for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) {
|
|
if (deasserted & (1 << index)) {
|
|
group_mask = &sc->attn_group[index];
|
|
|
|
bnx2x_attn_int_deasserted4(sc,
|
|
attn.
|
|
sig[4] & group_mask->sig[4]);
|
|
bnx2x_attn_int_deasserted3(sc,
|
|
attn.
|
|
sig[3] & group_mask->sig[3]);
|
|
bnx2x_attn_int_deasserted1(sc,
|
|
attn.
|
|
sig[1] & group_mask->sig[1]);
|
|
bnx2x_attn_int_deasserted2(sc,
|
|
attn.
|
|
sig[2] & group_mask->sig[2]);
|
|
bnx2x_attn_int_deasserted0(sc,
|
|
attn.
|
|
sig[0] & group_mask->sig[0]);
|
|
}
|
|
}
|
|
|
|
bnx2x_release_alr(sc);
|
|
|
|
if (sc->devinfo.int_block == INT_BLOCK_HC) {
|
|
reg_addr = (HC_REG_COMMAND_REG + port * 32 +
|
|
COMMAND_REG_ATTN_BITS_CLR);
|
|
} else {
|
|
reg_addr = (BAR_IGU_INTMEM + IGU_CMD_ATTN_BIT_CLR_UPPER * 8);
|
|
}
|
|
|
|
val = ~deasserted;
|
|
PMD_DRV_LOG(DEBUG,
|
|
"about to mask 0x%08x at %s addr 0x%08x", val,
|
|
(sc->devinfo.int_block == INT_BLOCK_HC) ? "HC" : "IGU",
|
|
reg_addr);
|
|
REG_WR(sc, reg_addr, val);
|
|
|
|
if (~sc->attn_state & deasserted) {
|
|
PMD_DRV_LOG(ERR, "IGU error");
|
|
}
|
|
|
|
reg_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
|
|
MISC_REG_AEU_MASK_ATTN_FUNC_0;
|
|
|
|
bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
|
|
|
|
aeu_mask = REG_RD(sc, reg_addr);
|
|
|
|
aeu_mask |= (deasserted & 0x3ff);
|
|
|
|
REG_WR(sc, reg_addr, aeu_mask);
|
|
bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
|
|
|
|
sc->attn_state &= ~deasserted;
|
|
}
|
|
|
|
static void bnx2x_attn_int(struct bnx2x_softc *sc)
|
|
{
|
|
/* read local copy of bits */
|
|
uint32_t attn_bits = le32toh(sc->def_sb->atten_status_block.attn_bits);
|
|
uint32_t attn_ack =
|
|
le32toh(sc->def_sb->atten_status_block.attn_bits_ack);
|
|
uint32_t attn_state = sc->attn_state;
|
|
|
|
/* look for changed bits */
|
|
uint32_t asserted = attn_bits & ~attn_ack & ~attn_state;
|
|
uint32_t deasserted = ~attn_bits & attn_ack & attn_state;
|
|
|
|
PMD_DRV_LOG(DEBUG,
|
|
"attn_bits 0x%08x attn_ack 0x%08x asserted 0x%08x deasserted 0x%08x",
|
|
attn_bits, attn_ack, asserted, deasserted);
|
|
|
|
if (~(attn_bits ^ attn_ack) & (attn_bits ^ attn_state)) {
|
|
PMD_DRV_LOG(ERR, "BAD attention state");
|
|
}
|
|
|
|
/* handle bits that were raised */
|
|
if (asserted) {
|
|
bnx2x_attn_int_asserted(sc, asserted);
|
|
}
|
|
|
|
if (deasserted) {
|
|
bnx2x_attn_int_deasserted(sc, deasserted);
|
|
}
|
|
}
|
|
|
|
static uint16_t bnx2x_update_dsb_idx(struct bnx2x_softc *sc)
|
|
{
|
|
struct host_sp_status_block *def_sb = sc->def_sb;
|
|
uint16_t rc = 0;
|
|
|
|
mb(); /* status block is written to by the chip */
|
|
|
|
if (sc->def_att_idx != def_sb->atten_status_block.attn_bits_index) {
|
|
sc->def_att_idx = def_sb->atten_status_block.attn_bits_index;
|
|
rc |= BNX2X_DEF_SB_ATT_IDX;
|
|
}
|
|
|
|
if (sc->def_idx != def_sb->sp_sb.running_index) {
|
|
sc->def_idx = def_sb->sp_sb.running_index;
|
|
rc |= BNX2X_DEF_SB_IDX;
|
|
}
|
|
|
|
mb();
|
|
|
|
return rc;
|
|
}
|
|
|
|
static struct ecore_queue_sp_obj *bnx2x_cid_to_q_obj(struct bnx2x_softc *sc,
|
|
uint32_t cid)
|
|
{
|
|
return &sc->sp_objs[CID_TO_FP(cid, sc)].q_obj;
|
|
}
|
|
|
|
static void bnx2x_handle_mcast_eqe(struct bnx2x_softc *sc)
|
|
{
|
|
struct ecore_mcast_ramrod_params rparam;
|
|
int rc;
|
|
|
|
memset(&rparam, 0, sizeof(rparam));
|
|
|
|
rparam.mcast_obj = &sc->mcast_obj;
|
|
|
|
/* clear pending state for the last command */
|
|
sc->mcast_obj.raw.clear_pending(&sc->mcast_obj.raw);
|
|
|
|
/* if there are pending mcast commands - send them */
|
|
if (sc->mcast_obj.check_pending(&sc->mcast_obj)) {
|
|
rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_CONT);
|
|
if (rc < 0) {
|
|
PMD_DRV_LOG(INFO,
|
|
"Failed to send pending mcast commands (%d)",
|
|
rc);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
bnx2x_handle_classification_eqe(struct bnx2x_softc *sc, union event_ring_elem *elem)
|
|
{
|
|
unsigned long ramrod_flags = 0;
|
|
int rc = 0;
|
|
uint32_t cid = elem->message.data.eth_event.echo & BNX2X_SWCID_MASK;
|
|
struct ecore_vlan_mac_obj *vlan_mac_obj;
|
|
|
|
/* always push next commands out, don't wait here */
|
|
bnx2x_set_bit(RAMROD_CONT, &ramrod_flags);
|
|
|
|
switch (le32toh(elem->message.data.eth_event.echo) >> BNX2X_SWCID_SHIFT) {
|
|
case ECORE_FILTER_MAC_PENDING:
|
|
PMD_DRV_LOG(DEBUG, "Got SETUP_MAC completions");
|
|
vlan_mac_obj = &sc->sp_objs[cid].mac_obj;
|
|
break;
|
|
|
|
case ECORE_FILTER_MCAST_PENDING:
|
|
PMD_DRV_LOG(DEBUG, "Got SETUP_MCAST completions");
|
|
bnx2x_handle_mcast_eqe(sc);
|
|
return;
|
|
|
|
default:
|
|
PMD_DRV_LOG(NOTICE, "Unsupported classification command: %d",
|
|
elem->message.data.eth_event.echo);
|
|
return;
|
|
}
|
|
|
|
rc = vlan_mac_obj->complete(sc, vlan_mac_obj, elem, &ramrod_flags);
|
|
|
|
if (rc < 0) {
|
|
PMD_DRV_LOG(NOTICE, "Failed to schedule new commands (%d)", rc);
|
|
} else if (rc > 0) {
|
|
PMD_DRV_LOG(DEBUG, "Scheduled next pending commands...");
|
|
}
|
|
}
|
|
|
|
static void bnx2x_handle_rx_mode_eqe(struct bnx2x_softc *sc)
|
|
{
|
|
bnx2x_clear_bit(ECORE_FILTER_RX_MODE_PENDING, &sc->sp_state);
|
|
|
|
/* send rx_mode command again if was requested */
|
|
if (bnx2x_test_and_clear_bit(ECORE_FILTER_RX_MODE_SCHED, &sc->sp_state)) {
|
|
bnx2x_set_storm_rx_mode(sc);
|
|
}
|
|
}
|
|
|
|
static void bnx2x_update_eq_prod(struct bnx2x_softc *sc, uint16_t prod)
|
|
{
|
|
storm_memset_eq_prod(sc, prod, SC_FUNC(sc));
|
|
wmb(); /* keep prod updates ordered */
|
|
}
|
|
|
|
static void bnx2x_eq_int(struct bnx2x_softc *sc)
|
|
{
|
|
uint16_t hw_cons, sw_cons, sw_prod;
|
|
union event_ring_elem *elem;
|
|
uint8_t echo;
|
|
uint32_t cid;
|
|
uint8_t opcode;
|
|
int spqe_cnt = 0;
|
|
struct ecore_queue_sp_obj *q_obj;
|
|
struct ecore_func_sp_obj *f_obj = &sc->func_obj;
|
|
struct ecore_raw_obj *rss_raw = &sc->rss_conf_obj.raw;
|
|
|
|
hw_cons = le16toh(*sc->eq_cons_sb);
|
|
|
|
/*
|
|
* The hw_cons range is 1-255, 257 - the sw_cons range is 0-254, 256.
|
|
* when we get to the next-page we need to adjust so the loop
|
|
* condition below will be met. The next element is the size of a
|
|
* regular element and hence incrementing by 1
|
|
*/
|
|
if ((hw_cons & EQ_DESC_MAX_PAGE) == EQ_DESC_MAX_PAGE) {
|
|
hw_cons++;
|
|
}
|
|
|
|
/*
|
|
* This function may never run in parallel with itself for a
|
|
* specific sc and no need for a read memory barrier here.
|
|
*/
|
|
sw_cons = sc->eq_cons;
|
|
sw_prod = sc->eq_prod;
|
|
|
|
for (;
|
|
sw_cons != hw_cons;
|
|
sw_prod = NEXT_EQ_IDX(sw_prod), sw_cons = NEXT_EQ_IDX(sw_cons)) {
|
|
|
|
elem = &sc->eq[EQ_DESC(sw_cons)];
|
|
|
|
/* elem CID originates from FW, actually LE */
|
|
cid = SW_CID(elem->message.data.cfc_del_event.cid);
|
|
opcode = elem->message.opcode;
|
|
|
|
/* handle eq element */
|
|
switch (opcode) {
|
|
case EVENT_RING_OPCODE_STAT_QUERY:
|
|
PMD_DEBUG_PERIODIC_LOG(DEBUG, "got statistics completion event %d",
|
|
sc->stats_comp++);
|
|
/* nothing to do with stats comp */
|
|
goto next_spqe;
|
|
|
|
case EVENT_RING_OPCODE_CFC_DEL:
|
|
/* handle according to cid range */
|
|
/* we may want to verify here that the sc state is HALTING */
|
|
PMD_DRV_LOG(DEBUG, "got delete ramrod for MULTI[%d]",
|
|
cid);
|
|
q_obj = bnx2x_cid_to_q_obj(sc, cid);
|
|
if (q_obj->complete_cmd(sc, q_obj, ECORE_Q_CMD_CFC_DEL)) {
|
|
break;
|
|
}
|
|
goto next_spqe;
|
|
|
|
case EVENT_RING_OPCODE_STOP_TRAFFIC:
|
|
PMD_DRV_LOG(DEBUG, "got STOP TRAFFIC");
|
|
if (f_obj->complete_cmd(sc, f_obj, ECORE_F_CMD_TX_STOP)) {
|
|
break;
|
|
}
|
|
goto next_spqe;
|
|
|
|
case EVENT_RING_OPCODE_START_TRAFFIC:
|
|
PMD_DRV_LOG(DEBUG, "got START TRAFFIC");
|
|
if (f_obj->complete_cmd
|
|
(sc, f_obj, ECORE_F_CMD_TX_START)) {
|
|
break;
|
|
}
|
|
goto next_spqe;
|
|
|
|
case EVENT_RING_OPCODE_FUNCTION_UPDATE:
|
|
echo = elem->message.data.function_update_event.echo;
|
|
if (echo == SWITCH_UPDATE) {
|
|
PMD_DRV_LOG(DEBUG,
|
|
"got FUNC_SWITCH_UPDATE ramrod");
|
|
if (f_obj->complete_cmd(sc, f_obj,
|
|
ECORE_F_CMD_SWITCH_UPDATE))
|
|
{
|
|
break;
|
|
}
|
|
} else {
|
|
PMD_DRV_LOG(DEBUG,
|
|
"AFEX: ramrod completed FUNCTION_UPDATE");
|
|
f_obj->complete_cmd(sc, f_obj,
|
|
ECORE_F_CMD_AFEX_UPDATE);
|
|
}
|
|
goto next_spqe;
|
|
|
|
case EVENT_RING_OPCODE_FORWARD_SETUP:
|
|
q_obj = &bnx2x_fwd_sp_obj(sc, q_obj);
|
|
if (q_obj->complete_cmd(sc, q_obj,
|
|
ECORE_Q_CMD_SETUP_TX_ONLY)) {
|
|
break;
|
|
}
|
|
goto next_spqe;
|
|
|
|
case EVENT_RING_OPCODE_FUNCTION_START:
|
|
PMD_DRV_LOG(DEBUG, "got FUNC_START ramrod");
|
|
if (f_obj->complete_cmd(sc, f_obj, ECORE_F_CMD_START)) {
|
|
break;
|
|
}
|
|
goto next_spqe;
|
|
|
|
case EVENT_RING_OPCODE_FUNCTION_STOP:
|
|
PMD_DRV_LOG(DEBUG, "got FUNC_STOP ramrod");
|
|
if (f_obj->complete_cmd(sc, f_obj, ECORE_F_CMD_STOP)) {
|
|
break;
|
|
}
|
|
goto next_spqe;
|
|
}
|
|
|
|
switch (opcode | sc->state) {
|
|
case (EVENT_RING_OPCODE_RSS_UPDATE_RULES | BNX2X_STATE_OPEN):
|
|
case (EVENT_RING_OPCODE_RSS_UPDATE_RULES | BNX2X_STATE_OPENING_WAITING_PORT):
|
|
cid =
|
|
elem->message.data.eth_event.echo & BNX2X_SWCID_MASK;
|
|
PMD_DRV_LOG(DEBUG, "got RSS_UPDATE ramrod. CID %d",
|
|
cid);
|
|
rss_raw->clear_pending(rss_raw);
|
|
break;
|
|
|
|
case (EVENT_RING_OPCODE_SET_MAC | BNX2X_STATE_OPEN):
|
|
case (EVENT_RING_OPCODE_SET_MAC | BNX2X_STATE_DIAG):
|
|
case (EVENT_RING_OPCODE_SET_MAC | BNX2X_STATE_CLOSING_WAITING_HALT):
|
|
case (EVENT_RING_OPCODE_CLASSIFICATION_RULES | BNX2X_STATE_OPEN):
|
|
case (EVENT_RING_OPCODE_CLASSIFICATION_RULES | BNX2X_STATE_DIAG):
|
|
case (EVENT_RING_OPCODE_CLASSIFICATION_RULES | BNX2X_STATE_CLOSING_WAITING_HALT):
|
|
PMD_DRV_LOG(DEBUG,
|
|
"got (un)set mac ramrod");
|
|
bnx2x_handle_classification_eqe(sc, elem);
|
|
break;
|
|
|
|
case (EVENT_RING_OPCODE_MULTICAST_RULES | BNX2X_STATE_OPEN):
|
|
case (EVENT_RING_OPCODE_MULTICAST_RULES | BNX2X_STATE_DIAG):
|
|
case (EVENT_RING_OPCODE_MULTICAST_RULES | BNX2X_STATE_CLOSING_WAITING_HALT):
|
|
PMD_DRV_LOG(DEBUG,
|
|
"got mcast ramrod");
|
|
bnx2x_handle_mcast_eqe(sc);
|
|
break;
|
|
|
|
case (EVENT_RING_OPCODE_FILTERS_RULES | BNX2X_STATE_OPEN):
|
|
case (EVENT_RING_OPCODE_FILTERS_RULES | BNX2X_STATE_DIAG):
|
|
case (EVENT_RING_OPCODE_FILTERS_RULES | BNX2X_STATE_CLOSING_WAITING_HALT):
|
|
PMD_DRV_LOG(DEBUG,
|
|
"got rx_mode ramrod");
|
|
bnx2x_handle_rx_mode_eqe(sc);
|
|
break;
|
|
|
|
default:
|
|
/* unknown event log error and continue */
|
|
PMD_DRV_LOG(INFO, "Unknown EQ event %d, sc->state 0x%x",
|
|
elem->message.opcode, sc->state);
|
|
}
|
|
|
|
next_spqe:
|
|
spqe_cnt++;
|
|
} /* for */
|
|
|
|
mb();
|
|
atomic_add_acq_long(&sc->eq_spq_left, spqe_cnt);
|
|
|
|
sc->eq_cons = sw_cons;
|
|
sc->eq_prod = sw_prod;
|
|
|
|
/* make sure that above mem writes were issued towards the memory */
|
|
wmb();
|
|
|
|
/* update producer */
|
|
bnx2x_update_eq_prod(sc, sc->eq_prod);
|
|
}
|
|
|
|
static int bnx2x_handle_sp_tq(struct bnx2x_softc *sc)
|
|
{
|
|
uint16_t status;
|
|
int rc = 0;
|
|
|
|
/* what work needs to be performed? */
|
|
status = bnx2x_update_dsb_idx(sc);
|
|
|
|
/* HW attentions */
|
|
if (status & BNX2X_DEF_SB_ATT_IDX) {
|
|
PMD_DRV_LOG(DEBUG, "---> ATTN INTR <---");
|
|
bnx2x_attn_int(sc);
|
|
status &= ~BNX2X_DEF_SB_ATT_IDX;
|
|
rc = 1;
|
|
}
|
|
|
|
/* SP events: STAT_QUERY and others */
|
|
if (status & BNX2X_DEF_SB_IDX) {
|
|
/* handle EQ completions */
|
|
PMD_DEBUG_PERIODIC_LOG(DEBUG, "---> EQ INTR <---");
|
|
bnx2x_eq_int(sc);
|
|
bnx2x_ack_sb(sc, sc->igu_dsb_id, USTORM_ID,
|
|
le16toh(sc->def_idx), IGU_INT_NOP, 1);
|
|
status &= ~BNX2X_DEF_SB_IDX;
|
|
}
|
|
|
|
/* if status is non zero then something went wrong */
|
|
if (unlikely(status)) {
|
|
PMD_DRV_LOG(INFO,
|
|
"Got an unknown SP interrupt! (0x%04x)", status);
|
|
}
|
|
|
|
/* ack status block only if something was actually handled */
|
|
bnx2x_ack_sb(sc, sc->igu_dsb_id, ATTENTION_ID,
|
|
le16toh(sc->def_att_idx), IGU_INT_ENABLE, 1);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void bnx2x_handle_fp_tq(struct bnx2x_fastpath *fp, int scan_fp)
|
|
{
|
|
struct bnx2x_softc *sc = fp->sc;
|
|
uint8_t more_rx = FALSE;
|
|
|
|
/* update the fastpath index */
|
|
bnx2x_update_fp_sb_idx(fp);
|
|
|
|
if (scan_fp) {
|
|
if (bnx2x_has_rx_work(fp)) {
|
|
more_rx = bnx2x_rxeof(sc, fp);
|
|
}
|
|
|
|
if (more_rx) {
|
|
/* still more work to do */
|
|
bnx2x_handle_fp_tq(fp, scan_fp);
|
|
return;
|
|
}
|
|
}
|
|
|
|
bnx2x_ack_sb(sc, fp->igu_sb_id, USTORM_ID,
|
|
le16toh(fp->fp_hc_idx), IGU_INT_DISABLE, 1);
|
|
}
|
|
|
|
/*
|
|
* Legacy interrupt entry point.
|
|
*
|
|
* Verifies that the controller generated the interrupt and
|
|
* then calls a separate routine to handle the various
|
|
* interrupt causes: link, RX, and TX.
|
|
*/
|
|
int bnx2x_intr_legacy(struct bnx2x_softc *sc, int scan_fp)
|
|
{
|
|
struct bnx2x_fastpath *fp;
|
|
uint32_t status, mask;
|
|
int i, rc = 0;
|
|
|
|
/*
|
|
* 0 for ustorm, 1 for cstorm
|
|
* the bits returned from ack_int() are 0-15
|
|
* bit 0 = attention status block
|
|
* bit 1 = fast path status block
|
|
* a mask of 0x2 or more = tx/rx event
|
|
* a mask of 1 = slow path event
|
|
*/
|
|
|
|
status = bnx2x_ack_int(sc);
|
|
|
|
/* the interrupt is not for us */
|
|
if (unlikely(status == 0)) {
|
|
return 0;
|
|
}
|
|
|
|
PMD_DEBUG_PERIODIC_LOG(DEBUG, "Interrupt status 0x%04x", status);
|
|
//bnx2x_dump_status_block(sc);
|
|
|
|
FOR_EACH_ETH_QUEUE(sc, i) {
|
|
fp = &sc->fp[i];
|
|
mask = (0x2 << (fp->index + CNIC_SUPPORT(sc)));
|
|
if (status & mask) {
|
|
bnx2x_handle_fp_tq(fp, scan_fp);
|
|
status &= ~mask;
|
|
}
|
|
}
|
|
|
|
if (unlikely(status & 0x1)) {
|
|
rc = bnx2x_handle_sp_tq(sc);
|
|
status &= ~0x1;
|
|
}
|
|
|
|
if (unlikely(status)) {
|
|
PMD_DRV_LOG(WARNING,
|
|
"Unexpected fastpath status (0x%08x)!", status);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int bnx2x_init_hw_common_chip(struct bnx2x_softc *sc);
|
|
static int bnx2x_init_hw_common(struct bnx2x_softc *sc);
|
|
static int bnx2x_init_hw_port(struct bnx2x_softc *sc);
|
|
static int bnx2x_init_hw_func(struct bnx2x_softc *sc);
|
|
static void bnx2x_reset_common(struct bnx2x_softc *sc);
|
|
static void bnx2x_reset_port(struct bnx2x_softc *sc);
|
|
static void bnx2x_reset_func(struct bnx2x_softc *sc);
|
|
static int bnx2x_init_firmware(struct bnx2x_softc *sc);
|
|
static void bnx2x_release_firmware(struct bnx2x_softc *sc);
|
|
|
|
static struct
|
|
ecore_func_sp_drv_ops bnx2x_func_sp_drv = {
|
|
.init_hw_cmn_chip = bnx2x_init_hw_common_chip,
|
|
.init_hw_cmn = bnx2x_init_hw_common,
|
|
.init_hw_port = bnx2x_init_hw_port,
|
|
.init_hw_func = bnx2x_init_hw_func,
|
|
|
|
.reset_hw_cmn = bnx2x_reset_common,
|
|
.reset_hw_port = bnx2x_reset_port,
|
|
.reset_hw_func = bnx2x_reset_func,
|
|
|
|
.init_fw = bnx2x_init_firmware,
|
|
.release_fw = bnx2x_release_firmware,
|
|
};
|
|
|
|
static void bnx2x_init_func_obj(struct bnx2x_softc *sc)
|
|
{
|
|
sc->dmae_ready = 0;
|
|
|
|
PMD_INIT_FUNC_TRACE();
|
|
|
|
ecore_init_func_obj(sc,
|
|
&sc->func_obj,
|
|
BNX2X_SP(sc, func_rdata),
|
|
(phys_addr_t)BNX2X_SP_MAPPING(sc, func_rdata),
|
|
BNX2X_SP(sc, func_afex_rdata),
|
|
(phys_addr_t)BNX2X_SP_MAPPING(sc, func_afex_rdata),
|
|
&bnx2x_func_sp_drv);
|
|
}
|
|
|
|
static int bnx2x_init_hw(struct bnx2x_softc *sc, uint32_t load_code)
|
|
{
|
|
struct ecore_func_state_params func_params = { NULL };
|
|
int rc;
|
|
|
|
PMD_INIT_FUNC_TRACE();
|
|
|
|
/* prepare the parameters for function state transitions */
|
|
bnx2x_set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
|
|
|
|
func_params.f_obj = &sc->func_obj;
|
|
func_params.cmd = ECORE_F_CMD_HW_INIT;
|
|
|
|
func_params.params.hw_init.load_phase = load_code;
|
|
|
|
/*
|
|
* Via a plethora of function pointers, we will eventually reach
|
|
* bnx2x_init_hw_common(), bnx2x_init_hw_port(), or bnx2x_init_hw_func().
|
|
*/
|
|
rc = ecore_func_state_change(sc, &func_params);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void
|
|
bnx2x_fill(struct bnx2x_softc *sc, uint32_t addr, int fill, uint32_t len)
|
|
{
|
|
uint32_t i;
|
|
|
|
if (!(len % 4) && !(addr % 4)) {
|
|
for (i = 0; i < len; i += 4) {
|
|
REG_WR(sc, (addr + i), fill);
|
|
}
|
|
} else {
|
|
for (i = 0; i < len; i++) {
|
|
REG_WR8(sc, (addr + i), fill);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* writes FP SP data to FW - data_size in dwords */
|
|
static void
|
|
bnx2x_wr_fp_sb_data(struct bnx2x_softc *sc, int fw_sb_id, uint32_t * sb_data_p,
|
|
uint32_t data_size)
|
|
{
|
|
uint32_t index;
|
|
|
|
for (index = 0; index < data_size; index++) {
|
|
REG_WR(sc,
|
|
(BAR_CSTRORM_INTMEM +
|
|
CSTORM_STATUS_BLOCK_DATA_OFFSET(fw_sb_id) +
|
|
(sizeof(uint32_t) * index)), *(sb_data_p + index));
|
|
}
|
|
}
|
|
|
|
static void bnx2x_zero_fp_sb(struct bnx2x_softc *sc, int fw_sb_id)
|
|
{
|
|
struct hc_status_block_data_e2 sb_data_e2;
|
|
struct hc_status_block_data_e1x sb_data_e1x;
|
|
uint32_t *sb_data_p;
|
|
uint32_t data_size = 0;
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
memset(&sb_data_e2, 0, sizeof(struct hc_status_block_data_e2));
|
|
sb_data_e2.common.state = SB_DISABLED;
|
|
sb_data_e2.common.p_func.vf_valid = FALSE;
|
|
sb_data_p = (uint32_t *) & sb_data_e2;
|
|
data_size = (sizeof(struct hc_status_block_data_e2) /
|
|
sizeof(uint32_t));
|
|
} else {
|
|
memset(&sb_data_e1x, 0,
|
|
sizeof(struct hc_status_block_data_e1x));
|
|
sb_data_e1x.common.state = SB_DISABLED;
|
|
sb_data_e1x.common.p_func.vf_valid = FALSE;
|
|
sb_data_p = (uint32_t *) & sb_data_e1x;
|
|
data_size = (sizeof(struct hc_status_block_data_e1x) /
|
|
sizeof(uint32_t));
|
|
}
|
|
|
|
bnx2x_wr_fp_sb_data(sc, fw_sb_id, sb_data_p, data_size);
|
|
|
|
bnx2x_fill(sc,
|
|
(BAR_CSTRORM_INTMEM + CSTORM_STATUS_BLOCK_OFFSET(fw_sb_id)), 0,
|
|
CSTORM_STATUS_BLOCK_SIZE);
|
|
bnx2x_fill(sc, (BAR_CSTRORM_INTMEM + CSTORM_SYNC_BLOCK_OFFSET(fw_sb_id)),
|
|
0, CSTORM_SYNC_BLOCK_SIZE);
|
|
}
|
|
|
|
static void
|
|
bnx2x_wr_sp_sb_data(struct bnx2x_softc *sc,
|
|
struct hc_sp_status_block_data *sp_sb_data)
|
|
{
|
|
uint32_t i;
|
|
|
|
for (i = 0;
|
|
i < (sizeof(struct hc_sp_status_block_data) / sizeof(uint32_t));
|
|
i++) {
|
|
REG_WR(sc,
|
|
(BAR_CSTRORM_INTMEM +
|
|
CSTORM_SP_STATUS_BLOCK_DATA_OFFSET(SC_FUNC(sc)) +
|
|
(i * sizeof(uint32_t))),
|
|
*((uint32_t *) sp_sb_data + i));
|
|
}
|
|
}
|
|
|
|
static void bnx2x_zero_sp_sb(struct bnx2x_softc *sc)
|
|
{
|
|
struct hc_sp_status_block_data sp_sb_data;
|
|
|
|
memset(&sp_sb_data, 0, sizeof(struct hc_sp_status_block_data));
|
|
|
|
sp_sb_data.state = SB_DISABLED;
|
|
sp_sb_data.p_func.vf_valid = FALSE;
|
|
|
|
bnx2x_wr_sp_sb_data(sc, &sp_sb_data);
|
|
|
|
bnx2x_fill(sc,
|
|
(BAR_CSTRORM_INTMEM +
|
|
CSTORM_SP_STATUS_BLOCK_OFFSET(SC_FUNC(sc))),
|
|
0, CSTORM_SP_STATUS_BLOCK_SIZE);
|
|
bnx2x_fill(sc,
|
|
(BAR_CSTRORM_INTMEM +
|
|
CSTORM_SP_SYNC_BLOCK_OFFSET(SC_FUNC(sc))),
|
|
0, CSTORM_SP_SYNC_BLOCK_SIZE);
|
|
}
|
|
|
|
static void
|
|
bnx2x_setup_ndsb_state_machine(struct hc_status_block_sm *hc_sm, int igu_sb_id,
|
|
int igu_seg_id)
|
|
{
|
|
hc_sm->igu_sb_id = igu_sb_id;
|
|
hc_sm->igu_seg_id = igu_seg_id;
|
|
hc_sm->timer_value = 0xFF;
|
|
hc_sm->time_to_expire = 0xFFFFFFFF;
|
|
}
|
|
|
|
static void bnx2x_map_sb_state_machines(struct hc_index_data *index_data)
|
|
{
|
|
/* zero out state machine indices */
|
|
|
|
/* rx indices */
|
|
index_data[HC_INDEX_ETH_RX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID;
|
|
|
|
/* tx indices */
|
|
index_data[HC_INDEX_OOO_TX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID;
|
|
index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags &= ~HC_INDEX_DATA_SM_ID;
|
|
index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags &= ~HC_INDEX_DATA_SM_ID;
|
|
index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags &= ~HC_INDEX_DATA_SM_ID;
|
|
|
|
/* map indices */
|
|
|
|
/* rx indices */
|
|
index_data[HC_INDEX_ETH_RX_CQ_CONS].flags |=
|
|
(SM_RX_ID << HC_INDEX_DATA_SM_ID_SHIFT);
|
|
|
|
/* tx indices */
|
|
index_data[HC_INDEX_OOO_TX_CQ_CONS].flags |=
|
|
(SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT);
|
|
index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags |=
|
|
(SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT);
|
|
index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags |=
|
|
(SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT);
|
|
index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags |=
|
|
(SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT);
|
|
}
|
|
|
|
static void
|
|
bnx2x_init_sb(struct bnx2x_softc *sc, phys_addr_t busaddr, int vfid,
|
|
uint8_t vf_valid, int fw_sb_id, int igu_sb_id)
|
|
{
|
|
struct hc_status_block_data_e2 sb_data_e2;
|
|
struct hc_status_block_data_e1x sb_data_e1x;
|
|
struct hc_status_block_sm *hc_sm_p;
|
|
uint32_t *sb_data_p;
|
|
int igu_seg_id;
|
|
int data_size;
|
|
|
|
if (CHIP_INT_MODE_IS_BC(sc)) {
|
|
igu_seg_id = HC_SEG_ACCESS_NORM;
|
|
} else {
|
|
igu_seg_id = IGU_SEG_ACCESS_NORM;
|
|
}
|
|
|
|
bnx2x_zero_fp_sb(sc, fw_sb_id);
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
memset(&sb_data_e2, 0, sizeof(struct hc_status_block_data_e2));
|
|
sb_data_e2.common.state = SB_ENABLED;
|
|
sb_data_e2.common.p_func.pf_id = SC_FUNC(sc);
|
|
sb_data_e2.common.p_func.vf_id = vfid;
|
|
sb_data_e2.common.p_func.vf_valid = vf_valid;
|
|
sb_data_e2.common.p_func.vnic_id = SC_VN(sc);
|
|
sb_data_e2.common.same_igu_sb_1b = TRUE;
|
|
sb_data_e2.common.host_sb_addr.hi = U64_HI(busaddr);
|
|
sb_data_e2.common.host_sb_addr.lo = U64_LO(busaddr);
|
|
hc_sm_p = sb_data_e2.common.state_machine;
|
|
sb_data_p = (uint32_t *) & sb_data_e2;
|
|
data_size = (sizeof(struct hc_status_block_data_e2) /
|
|
sizeof(uint32_t));
|
|
bnx2x_map_sb_state_machines(sb_data_e2.index_data);
|
|
} else {
|
|
memset(&sb_data_e1x, 0,
|
|
sizeof(struct hc_status_block_data_e1x));
|
|
sb_data_e1x.common.state = SB_ENABLED;
|
|
sb_data_e1x.common.p_func.pf_id = SC_FUNC(sc);
|
|
sb_data_e1x.common.p_func.vf_id = 0xff;
|
|
sb_data_e1x.common.p_func.vf_valid = FALSE;
|
|
sb_data_e1x.common.p_func.vnic_id = SC_VN(sc);
|
|
sb_data_e1x.common.same_igu_sb_1b = TRUE;
|
|
sb_data_e1x.common.host_sb_addr.hi = U64_HI(busaddr);
|
|
sb_data_e1x.common.host_sb_addr.lo = U64_LO(busaddr);
|
|
hc_sm_p = sb_data_e1x.common.state_machine;
|
|
sb_data_p = (uint32_t *) & sb_data_e1x;
|
|
data_size = (sizeof(struct hc_status_block_data_e1x) /
|
|
sizeof(uint32_t));
|
|
bnx2x_map_sb_state_machines(sb_data_e1x.index_data);
|
|
}
|
|
|
|
bnx2x_setup_ndsb_state_machine(&hc_sm_p[SM_RX_ID], igu_sb_id, igu_seg_id);
|
|
bnx2x_setup_ndsb_state_machine(&hc_sm_p[SM_TX_ID], igu_sb_id, igu_seg_id);
|
|
|
|
/* write indices to HW - PCI guarantees endianity of regpairs */
|
|
bnx2x_wr_fp_sb_data(sc, fw_sb_id, sb_data_p, data_size);
|
|
}
|
|
|
|
static uint8_t bnx2x_fp_qzone_id(struct bnx2x_fastpath *fp)
|
|
{
|
|
if (CHIP_IS_E1x(fp->sc)) {
|
|
return fp->cl_id + SC_PORT(fp->sc) * ETH_MAX_RX_CLIENTS_E1H;
|
|
} else {
|
|
return fp->cl_id;
|
|
}
|
|
}
|
|
|
|
static uint32_t
|
|
bnx2x_rx_ustorm_prods_offset(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp)
|
|
{
|
|
uint32_t offset = BAR_USTRORM_INTMEM;
|
|
|
|
if (IS_VF(sc)) {
|
|
return PXP_VF_ADDR_USDM_QUEUES_START +
|
|
(sc->acquire_resp.resc.hw_qid[fp->index] *
|
|
sizeof(struct ustorm_queue_zone_data));
|
|
} else if (!CHIP_IS_E1x(sc)) {
|
|
offset += USTORM_RX_PRODS_E2_OFFSET(fp->cl_qzone_id);
|
|
} else {
|
|
offset += USTORM_RX_PRODS_E1X_OFFSET(SC_PORT(sc), fp->cl_id);
|
|
}
|
|
|
|
return offset;
|
|
}
|
|
|
|
static void bnx2x_init_eth_fp(struct bnx2x_softc *sc, int idx)
|
|
{
|
|
struct bnx2x_fastpath *fp = &sc->fp[idx];
|
|
uint32_t cids[ECORE_MULTI_TX_COS] = { 0 };
|
|
unsigned long q_type = 0;
|
|
int cos;
|
|
|
|
fp->sc = sc;
|
|
fp->index = idx;
|
|
|
|
fp->igu_sb_id = (sc->igu_base_sb + idx + CNIC_SUPPORT(sc));
|
|
fp->fw_sb_id = (sc->base_fw_ndsb + idx + CNIC_SUPPORT(sc));
|
|
|
|
if (CHIP_IS_E1x(sc))
|
|
fp->cl_id = SC_L_ID(sc) + idx;
|
|
else
|
|
/* want client ID same as IGU SB ID for non-E1 */
|
|
fp->cl_id = fp->igu_sb_id;
|
|
fp->cl_qzone_id = bnx2x_fp_qzone_id(fp);
|
|
|
|
/* setup sb indices */
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
fp->sb_index_values = fp->status_block.e2_sb->sb.index_values;
|
|
fp->sb_running_index = fp->status_block.e2_sb->sb.running_index;
|
|
} else {
|
|
fp->sb_index_values = fp->status_block.e1x_sb->sb.index_values;
|
|
fp->sb_running_index =
|
|
fp->status_block.e1x_sb->sb.running_index;
|
|
}
|
|
|
|
/* init shortcut */
|
|
fp->ustorm_rx_prods_offset = bnx2x_rx_ustorm_prods_offset(sc, fp);
|
|
|
|
fp->rx_cq_cons_sb = &fp->sb_index_values[HC_INDEX_ETH_RX_CQ_CONS];
|
|
|
|
for (cos = 0; cos < sc->max_cos; cos++) {
|
|
cids[cos] = idx;
|
|
}
|
|
fp->tx_cons_sb = &fp->sb_index_values[HC_INDEX_ETH_TX_CQ_CONS_COS0];
|
|
|
|
/* nothing more for a VF to do */
|
|
if (IS_VF(sc)) {
|
|
return;
|
|
}
|
|
|
|
bnx2x_init_sb(sc, fp->sb_dma.paddr, BNX2X_VF_ID_INVALID, FALSE,
|
|
fp->fw_sb_id, fp->igu_sb_id);
|
|
|
|
bnx2x_update_fp_sb_idx(fp);
|
|
|
|
/* Configure Queue State object */
|
|
bnx2x_set_bit(ECORE_Q_TYPE_HAS_RX, &q_type);
|
|
bnx2x_set_bit(ECORE_Q_TYPE_HAS_TX, &q_type);
|
|
|
|
ecore_init_queue_obj(sc,
|
|
&sc->sp_objs[idx].q_obj,
|
|
fp->cl_id,
|
|
cids,
|
|
sc->max_cos,
|
|
SC_FUNC(sc),
|
|
BNX2X_SP(sc, q_rdata),
|
|
(phys_addr_t)BNX2X_SP_MAPPING(sc, q_rdata),
|
|
q_type);
|
|
|
|
/* configure classification DBs */
|
|
ecore_init_mac_obj(sc,
|
|
&sc->sp_objs[idx].mac_obj,
|
|
fp->cl_id,
|
|
idx,
|
|
SC_FUNC(sc),
|
|
BNX2X_SP(sc, mac_rdata),
|
|
(phys_addr_t)BNX2X_SP_MAPPING(sc, mac_rdata),
|
|
ECORE_FILTER_MAC_PENDING, &sc->sp_state,
|
|
ECORE_OBJ_TYPE_RX_TX, &sc->macs_pool);
|
|
}
|
|
|
|
static void
|
|
bnx2x_update_rx_prod(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
|
|
uint16_t rx_bd_prod, uint16_t rx_cq_prod)
|
|
{
|
|
union ustorm_eth_rx_producers rx_prods;
|
|
uint32_t i;
|
|
|
|
/* update producers */
|
|
rx_prods.prod.bd_prod = rx_bd_prod;
|
|
rx_prods.prod.cqe_prod = rx_cq_prod;
|
|
rx_prods.prod.reserved = 0;
|
|
|
|
/*
|
|
* Make sure that the BD and SGE data is updated before updating the
|
|
* producers since FW might read the BD/SGE right after the producer
|
|
* is updated.
|
|
* This is only applicable for weak-ordered memory model archs such
|
|
* as IA-64. The following barrier is also mandatory since FW will
|
|
* assumes BDs must have buffers.
|
|
*/
|
|
wmb();
|
|
|
|
for (i = 0; i < (sizeof(rx_prods) / 4); i++) {
|
|
REG_WR(sc,
|
|
(fp->ustorm_rx_prods_offset + (i * 4)),
|
|
rx_prods.raw_data[i]);
|
|
}
|
|
|
|
wmb(); /* keep prod updates ordered */
|
|
}
|
|
|
|
static void bnx2x_init_rx_rings(struct bnx2x_softc *sc)
|
|
{
|
|
struct bnx2x_fastpath *fp;
|
|
int i;
|
|
struct bnx2x_rx_queue *rxq;
|
|
|
|
for (i = 0; i < sc->num_queues; i++) {
|
|
fp = &sc->fp[i];
|
|
rxq = sc->rx_queues[fp->index];
|
|
if (!rxq) {
|
|
PMD_RX_LOG(ERR, "RX queue is NULL");
|
|
return;
|
|
}
|
|
|
|
rxq->rx_bd_head = 0;
|
|
rxq->rx_bd_tail = rxq->nb_rx_desc;
|
|
rxq->rx_cq_head = 0;
|
|
rxq->rx_cq_tail = TOTAL_RCQ_ENTRIES(rxq);
|
|
*fp->rx_cq_cons_sb = 0;
|
|
|
|
/*
|
|
* Activate the BD ring...
|
|
* Warning, this will generate an interrupt (to the TSTORM)
|
|
* so this can only be done after the chip is initialized
|
|
*/
|
|
bnx2x_update_rx_prod(sc, fp, rxq->rx_bd_tail, rxq->rx_cq_tail);
|
|
|
|
if (i != 0) {
|
|
continue;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void bnx2x_init_tx_ring_one(struct bnx2x_fastpath *fp)
|
|
{
|
|
struct bnx2x_tx_queue *txq = fp->sc->tx_queues[fp->index];
|
|
|
|
fp->tx_db.data.header.header = 1 << DOORBELL_HDR_DB_TYPE_SHIFT;
|
|
fp->tx_db.data.zero_fill1 = 0;
|
|
fp->tx_db.data.prod = 0;
|
|
|
|
if (!txq) {
|
|
PMD_TX_LOG(ERR, "ERROR: TX queue is NULL");
|
|
return;
|
|
}
|
|
|
|
txq->tx_pkt_tail = 0;
|
|
txq->tx_pkt_head = 0;
|
|
txq->tx_bd_tail = 0;
|
|
txq->tx_bd_head = 0;
|
|
}
|
|
|
|
static void bnx2x_init_tx_rings(struct bnx2x_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < sc->num_queues; i++) {
|
|
bnx2x_init_tx_ring_one(&sc->fp[i]);
|
|
}
|
|
}
|
|
|
|
static void bnx2x_init_def_sb(struct bnx2x_softc *sc)
|
|
{
|
|
struct host_sp_status_block *def_sb = sc->def_sb;
|
|
phys_addr_t mapping = sc->def_sb_dma.paddr;
|
|
int igu_sp_sb_index;
|
|
int igu_seg_id;
|
|
int port = SC_PORT(sc);
|
|
int func = SC_FUNC(sc);
|
|
int reg_offset, reg_offset_en5;
|
|
uint64_t section;
|
|
int index, sindex;
|
|
struct hc_sp_status_block_data sp_sb_data;
|
|
|
|
memset(&sp_sb_data, 0, sizeof(struct hc_sp_status_block_data));
|
|
|
|
if (CHIP_INT_MODE_IS_BC(sc)) {
|
|
igu_sp_sb_index = DEF_SB_IGU_ID;
|
|
igu_seg_id = HC_SEG_ACCESS_DEF;
|
|
} else {
|
|
igu_sp_sb_index = sc->igu_dsb_id;
|
|
igu_seg_id = IGU_SEG_ACCESS_DEF;
|
|
}
|
|
|
|
/* attentions */
|
|
section = ((uint64_t) mapping +
|
|
offsetof(struct host_sp_status_block, atten_status_block));
|
|
def_sb->atten_status_block.status_block_id = igu_sp_sb_index;
|
|
sc->attn_state = 0;
|
|
|
|
reg_offset = (port) ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
|
|
MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0;
|
|
|
|
reg_offset_en5 = (port) ? MISC_REG_AEU_ENABLE5_FUNC_1_OUT_0 :
|
|
MISC_REG_AEU_ENABLE5_FUNC_0_OUT_0;
|
|
|
|
for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) {
|
|
/* take care of sig[0]..sig[4] */
|
|
for (sindex = 0; sindex < 4; sindex++) {
|
|
sc->attn_group[index].sig[sindex] =
|
|
REG_RD(sc,
|
|
(reg_offset + (sindex * 0x4) +
|
|
(0x10 * index)));
|
|
}
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
/*
|
|
* enable5 is separate from the rest of the registers,
|
|
* and the address skip is 4 and not 16 between the
|
|
* different groups
|
|
*/
|
|
sc->attn_group[index].sig[4] =
|
|
REG_RD(sc, (reg_offset_en5 + (0x4 * index)));
|
|
} else {
|
|
sc->attn_group[index].sig[4] = 0;
|
|
}
|
|
}
|
|
|
|
if (sc->devinfo.int_block == INT_BLOCK_HC) {
|
|
reg_offset =
|
|
port ? HC_REG_ATTN_MSG1_ADDR_L : HC_REG_ATTN_MSG0_ADDR_L;
|
|
REG_WR(sc, reg_offset, U64_LO(section));
|
|
REG_WR(sc, (reg_offset + 4), U64_HI(section));
|
|
} else if (!CHIP_IS_E1x(sc)) {
|
|
REG_WR(sc, IGU_REG_ATTN_MSG_ADDR_L, U64_LO(section));
|
|
REG_WR(sc, IGU_REG_ATTN_MSG_ADDR_H, U64_HI(section));
|
|
}
|
|
|
|
section = ((uint64_t) mapping +
|
|
offsetof(struct host_sp_status_block, sp_sb));
|
|
|
|
bnx2x_zero_sp_sb(sc);
|
|
|
|
/* PCI guarantees endianity of regpair */
|
|
sp_sb_data.state = SB_ENABLED;
|
|
sp_sb_data.host_sb_addr.lo = U64_LO(section);
|
|
sp_sb_data.host_sb_addr.hi = U64_HI(section);
|
|
sp_sb_data.igu_sb_id = igu_sp_sb_index;
|
|
sp_sb_data.igu_seg_id = igu_seg_id;
|
|
sp_sb_data.p_func.pf_id = func;
|
|
sp_sb_data.p_func.vnic_id = SC_VN(sc);
|
|
sp_sb_data.p_func.vf_id = 0xff;
|
|
|
|
bnx2x_wr_sp_sb_data(sc, &sp_sb_data);
|
|
|
|
bnx2x_ack_sb(sc, sc->igu_dsb_id, USTORM_ID, 0, IGU_INT_ENABLE, 0);
|
|
}
|
|
|
|
static void bnx2x_init_sp_ring(struct bnx2x_softc *sc)
|
|
{
|
|
atomic_store_rel_long(&sc->cq_spq_left, MAX_SPQ_PENDING);
|
|
sc->spq_prod_idx = 0;
|
|
sc->dsb_sp_prod =
|
|
&sc->def_sb->sp_sb.index_values[HC_SP_INDEX_ETH_DEF_CONS];
|
|
sc->spq_prod_bd = sc->spq;
|
|
sc->spq_last_bd = (sc->spq_prod_bd + MAX_SP_DESC_CNT);
|
|
}
|
|
|
|
static void bnx2x_init_eq_ring(struct bnx2x_softc *sc)
|
|
{
|
|
union event_ring_elem *elem;
|
|
int i;
|
|
|
|
for (i = 1; i <= NUM_EQ_PAGES; i++) {
|
|
elem = &sc->eq[EQ_DESC_CNT_PAGE * i - 1];
|
|
|
|
elem->next_page.addr.hi = htole32(U64_HI(sc->eq_dma.paddr +
|
|
BNX2X_PAGE_SIZE *
|
|
(i % NUM_EQ_PAGES)));
|
|
elem->next_page.addr.lo = htole32(U64_LO(sc->eq_dma.paddr +
|
|
BNX2X_PAGE_SIZE *
|
|
(i % NUM_EQ_PAGES)));
|
|
}
|
|
|
|
sc->eq_cons = 0;
|
|
sc->eq_prod = NUM_EQ_DESC;
|
|
sc->eq_cons_sb = &sc->def_sb->sp_sb.index_values[HC_SP_INDEX_EQ_CONS];
|
|
|
|
atomic_store_rel_long(&sc->eq_spq_left,
|
|
(min((MAX_SP_DESC_CNT - MAX_SPQ_PENDING),
|
|
NUM_EQ_DESC) - 1));
|
|
}
|
|
|
|
static void bnx2x_init_internal_common(struct bnx2x_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
if (IS_MF_SI(sc)) {
|
|
/*
|
|
* In switch independent mode, the TSTORM needs to accept
|
|
* packets that failed classification, since approximate match
|
|
* mac addresses aren't written to NIG LLH.
|
|
*/
|
|
REG_WR8(sc,
|
|
(BAR_TSTRORM_INTMEM +
|
|
TSTORM_ACCEPT_CLASSIFY_FAILED_OFFSET), 2);
|
|
} else
|
|
REG_WR8(sc,
|
|
(BAR_TSTRORM_INTMEM +
|
|
TSTORM_ACCEPT_CLASSIFY_FAILED_OFFSET), 0);
|
|
|
|
/*
|
|
* Zero this manually as its initialization is currently missing
|
|
* in the initTool.
|
|
*/
|
|
for (i = 0; i < (USTORM_AGG_DATA_SIZE >> 2); i++) {
|
|
REG_WR(sc,
|
|
(BAR_USTRORM_INTMEM + USTORM_AGG_DATA_OFFSET + (i * 4)),
|
|
0);
|
|
}
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
REG_WR8(sc, (BAR_CSTRORM_INTMEM + CSTORM_IGU_MODE_OFFSET),
|
|
CHIP_INT_MODE_IS_BC(sc) ? HC_IGU_BC_MODE :
|
|
HC_IGU_NBC_MODE);
|
|
}
|
|
}
|
|
|
|
static void bnx2x_init_internal(struct bnx2x_softc *sc, uint32_t load_code)
|
|
{
|
|
switch (load_code) {
|
|
case FW_MSG_CODE_DRV_LOAD_COMMON:
|
|
case FW_MSG_CODE_DRV_LOAD_COMMON_CHIP:
|
|
bnx2x_init_internal_common(sc);
|
|
/* no break */
|
|
|
|
case FW_MSG_CODE_DRV_LOAD_PORT:
|
|
/* nothing to do */
|
|
/* no break */
|
|
|
|
case FW_MSG_CODE_DRV_LOAD_FUNCTION:
|
|
/* internal memory per function is initialized inside bnx2x_pf_init */
|
|
break;
|
|
|
|
default:
|
|
PMD_DRV_LOG(NOTICE, "Unknown load_code (0x%x) from MCP",
|
|
load_code);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void
|
|
storm_memset_func_cfg(struct bnx2x_softc *sc,
|
|
struct tstorm_eth_function_common_config *tcfg,
|
|
uint16_t abs_fid)
|
|
{
|
|
uint32_t addr;
|
|
size_t size;
|
|
|
|
addr = (BAR_TSTRORM_INTMEM +
|
|
TSTORM_FUNCTION_COMMON_CONFIG_OFFSET(abs_fid));
|
|
size = sizeof(struct tstorm_eth_function_common_config);
|
|
ecore_storm_memset_struct(sc, addr, size, (uint32_t *) tcfg);
|
|
}
|
|
|
|
static void bnx2x_func_init(struct bnx2x_softc *sc, struct bnx2x_func_init_params *p)
|
|
{
|
|
struct tstorm_eth_function_common_config tcfg = { 0 };
|
|
|
|
if (CHIP_IS_E1x(sc)) {
|
|
storm_memset_func_cfg(sc, &tcfg, p->func_id);
|
|
}
|
|
|
|
/* Enable the function in the FW */
|
|
storm_memset_vf_to_pf(sc, p->func_id, p->pf_id);
|
|
storm_memset_func_en(sc, p->func_id, 1);
|
|
|
|
/* spq */
|
|
if (p->func_flgs & FUNC_FLG_SPQ) {
|
|
storm_memset_spq_addr(sc, p->spq_map, p->func_id);
|
|
REG_WR(sc,
|
|
(XSEM_REG_FAST_MEMORY +
|
|
XSTORM_SPQ_PROD_OFFSET(p->func_id)), p->spq_prod);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Calculates the sum of vn_min_rates.
|
|
* It's needed for further normalizing of the min_rates.
|
|
* Returns:
|
|
* sum of vn_min_rates.
|
|
* or
|
|
* 0 - if all the min_rates are 0.
|
|
* In the later case fainess algorithm should be deactivated.
|
|
* If all min rates are not zero then those that are zeroes will be set to 1.
|
|
*/
|
|
static void bnx2x_calc_vn_min(struct bnx2x_softc *sc, struct cmng_init_input *input)
|
|
{
|
|
uint32_t vn_cfg;
|
|
uint32_t vn_min_rate;
|
|
int all_zero = 1;
|
|
int vn;
|
|
|
|
for (vn = VN_0; vn < SC_MAX_VN_NUM(sc); vn++) {
|
|
vn_cfg = sc->devinfo.mf_info.mf_config[vn];
|
|
vn_min_rate = (((vn_cfg & FUNC_MF_CFG_MIN_BW_MASK) >>
|
|
FUNC_MF_CFG_MIN_BW_SHIFT) * 100);
|
|
|
|
if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE) {
|
|
/* skip hidden VNs */
|
|
vn_min_rate = 0;
|
|
} else if (!vn_min_rate) {
|
|
/* If min rate is zero - set it to 100 */
|
|
vn_min_rate = DEF_MIN_RATE;
|
|
} else {
|
|
all_zero = 0;
|
|
}
|
|
|
|
input->vnic_min_rate[vn] = vn_min_rate;
|
|
}
|
|
|
|
/* if ETS or all min rates are zeros - disable fairness */
|
|
if (all_zero) {
|
|
input->flags.cmng_enables &= ~CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
|
|
} else {
|
|
input->flags.cmng_enables |= CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
|
|
}
|
|
}
|
|
|
|
static uint16_t
|
|
bnx2x_extract_max_cfg(__rte_unused struct bnx2x_softc *sc, uint32_t mf_cfg)
|
|
{
|
|
uint16_t max_cfg = ((mf_cfg & FUNC_MF_CFG_MAX_BW_MASK) >>
|
|
FUNC_MF_CFG_MAX_BW_SHIFT);
|
|
|
|
if (!max_cfg) {
|
|
PMD_DRV_LOG(DEBUG,
|
|
"Max BW configured to 0 - using 100 instead");
|
|
max_cfg = 100;
|
|
}
|
|
|
|
return max_cfg;
|
|
}
|
|
|
|
static void
|
|
bnx2x_calc_vn_max(struct bnx2x_softc *sc, int vn, struct cmng_init_input *input)
|
|
{
|
|
uint16_t vn_max_rate;
|
|
uint32_t vn_cfg = sc->devinfo.mf_info.mf_config[vn];
|
|
uint32_t max_cfg;
|
|
|
|
if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE) {
|
|
vn_max_rate = 0;
|
|
} else {
|
|
max_cfg = bnx2x_extract_max_cfg(sc, vn_cfg);
|
|
|
|
if (IS_MF_SI(sc)) {
|
|
/* max_cfg in percents of linkspeed */
|
|
vn_max_rate =
|
|
((sc->link_vars.line_speed * max_cfg) / 100);
|
|
} else { /* SD modes */
|
|
/* max_cfg is absolute in 100Mb units */
|
|
vn_max_rate = (max_cfg * 100);
|
|
}
|
|
}
|
|
|
|
input->vnic_max_rate[vn] = vn_max_rate;
|
|
}
|
|
|
|
static void
|
|
bnx2x_cmng_fns_init(struct bnx2x_softc *sc, uint8_t read_cfg, uint8_t cmng_type)
|
|
{
|
|
struct cmng_init_input input;
|
|
int vn;
|
|
|
|
memset(&input, 0, sizeof(struct cmng_init_input));
|
|
|
|
input.port_rate = sc->link_vars.line_speed;
|
|
|
|
if (cmng_type == CMNG_FNS_MINMAX) {
|
|
/* read mf conf from shmem */
|
|
if (read_cfg) {
|
|
bnx2x_read_mf_cfg(sc);
|
|
}
|
|
|
|
/* get VN min rate and enable fairness if not 0 */
|
|
bnx2x_calc_vn_min(sc, &input);
|
|
|
|
/* get VN max rate */
|
|
if (sc->port.pmf) {
|
|
for (vn = VN_0; vn < SC_MAX_VN_NUM(sc); vn++) {
|
|
bnx2x_calc_vn_max(sc, vn, &input);
|
|
}
|
|
}
|
|
|
|
/* always enable rate shaping and fairness */
|
|
input.flags.cmng_enables |= CMNG_FLAGS_PER_PORT_RATE_SHAPING_VN;
|
|
|
|
ecore_init_cmng(&input, &sc->cmng);
|
|
return;
|
|
}
|
|
}
|
|
|
|
static int bnx2x_get_cmng_fns_mode(struct bnx2x_softc *sc)
|
|
{
|
|
if (CHIP_REV_IS_SLOW(sc)) {
|
|
return CMNG_FNS_NONE;
|
|
}
|
|
|
|
if (IS_MF(sc)) {
|
|
return CMNG_FNS_MINMAX;
|
|
}
|
|
|
|
return CMNG_FNS_NONE;
|
|
}
|
|
|
|
static void
|
|
storm_memset_cmng(struct bnx2x_softc *sc, struct cmng_init *cmng, uint8_t port)
|
|
{
|
|
int vn;
|
|
int func;
|
|
uint32_t addr;
|
|
size_t size;
|
|
|
|
addr = (BAR_XSTRORM_INTMEM + XSTORM_CMNG_PER_PORT_VARS_OFFSET(port));
|
|
size = sizeof(struct cmng_struct_per_port);
|
|
ecore_storm_memset_struct(sc, addr, size, (uint32_t *) & cmng->port);
|
|
|
|
for (vn = VN_0; vn < SC_MAX_VN_NUM(sc); vn++) {
|
|
func = func_by_vn(sc, vn);
|
|
|
|
addr = (BAR_XSTRORM_INTMEM +
|
|
XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(func));
|
|
size = sizeof(struct rate_shaping_vars_per_vn);
|
|
ecore_storm_memset_struct(sc, addr, size,
|
|
(uint32_t *) & cmng->
|
|
vnic.vnic_max_rate[vn]);
|
|
|
|
addr = (BAR_XSTRORM_INTMEM +
|
|
XSTORM_FAIRNESS_PER_VN_VARS_OFFSET(func));
|
|
size = sizeof(struct fairness_vars_per_vn);
|
|
ecore_storm_memset_struct(sc, addr, size,
|
|
(uint32_t *) & cmng->
|
|
vnic.vnic_min_rate[vn]);
|
|
}
|
|
}
|
|
|
|
static void bnx2x_pf_init(struct bnx2x_softc *sc)
|
|
{
|
|
struct bnx2x_func_init_params func_init;
|
|
struct event_ring_data eq_data;
|
|
uint16_t flags;
|
|
|
|
memset(&eq_data, 0, sizeof(struct event_ring_data));
|
|
memset(&func_init, 0, sizeof(struct bnx2x_func_init_params));
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
/* reset IGU PF statistics: MSIX + ATTN */
|
|
/* PF */
|
|
REG_WR(sc,
|
|
(IGU_REG_STATISTIC_NUM_MESSAGE_SENT +
|
|
(BNX2X_IGU_STAS_MSG_VF_CNT * 4) +
|
|
((CHIP_IS_MODE_4_PORT(sc) ? SC_FUNC(sc) : SC_VN(sc)) *
|
|
4)), 0);
|
|
/* ATTN */
|
|
REG_WR(sc,
|
|
(IGU_REG_STATISTIC_NUM_MESSAGE_SENT +
|
|
(BNX2X_IGU_STAS_MSG_VF_CNT * 4) +
|
|
(BNX2X_IGU_STAS_MSG_PF_CNT * 4) +
|
|
((CHIP_IS_MODE_4_PORT(sc) ? SC_FUNC(sc) : SC_VN(sc)) *
|
|
4)), 0);
|
|
}
|
|
|
|
/* function setup flags */
|
|
flags = (FUNC_FLG_STATS | FUNC_FLG_LEADING | FUNC_FLG_SPQ);
|
|
|
|
func_init.func_flgs = flags;
|
|
func_init.pf_id = SC_FUNC(sc);
|
|
func_init.func_id = SC_FUNC(sc);
|
|
func_init.spq_map = sc->spq_dma.paddr;
|
|
func_init.spq_prod = sc->spq_prod_idx;
|
|
|
|
bnx2x_func_init(sc, &func_init);
|
|
|
|
memset(&sc->cmng, 0, sizeof(struct cmng_struct_per_port));
|
|
|
|
/*
|
|
* Congestion management values depend on the link rate.
|
|
* There is no active link so initial link rate is set to 10Gbps.
|
|
* When the link comes up the congestion management values are
|
|
* re-calculated according to the actual link rate.
|
|
*/
|
|
sc->link_vars.line_speed = SPEED_10000;
|
|
bnx2x_cmng_fns_init(sc, TRUE, bnx2x_get_cmng_fns_mode(sc));
|
|
|
|
/* Only the PMF sets the HW */
|
|
if (sc->port.pmf) {
|
|
storm_memset_cmng(sc, &sc->cmng, SC_PORT(sc));
|
|
}
|
|
|
|
/* init Event Queue - PCI bus guarantees correct endainity */
|
|
eq_data.base_addr.hi = U64_HI(sc->eq_dma.paddr);
|
|
eq_data.base_addr.lo = U64_LO(sc->eq_dma.paddr);
|
|
eq_data.producer = sc->eq_prod;
|
|
eq_data.index_id = HC_SP_INDEX_EQ_CONS;
|
|
eq_data.sb_id = DEF_SB_ID;
|
|
storm_memset_eq_data(sc, &eq_data, SC_FUNC(sc));
|
|
}
|
|
|
|
static void bnx2x_hc_int_enable(struct bnx2x_softc *sc)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
uint32_t addr = (port) ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0;
|
|
uint32_t val = REG_RD(sc, addr);
|
|
uint8_t msix = (sc->interrupt_mode == INTR_MODE_MSIX)
|
|
|| (sc->interrupt_mode == INTR_MODE_SINGLE_MSIX);
|
|
uint8_t single_msix = (sc->interrupt_mode == INTR_MODE_SINGLE_MSIX);
|
|
uint8_t msi = (sc->interrupt_mode == INTR_MODE_MSI);
|
|
|
|
if (msix) {
|
|
val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
|
|
HC_CONFIG_0_REG_INT_LINE_EN_0);
|
|
val |= (HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
|
|
HC_CONFIG_0_REG_ATTN_BIT_EN_0);
|
|
if (single_msix) {
|
|
val |= HC_CONFIG_0_REG_SINGLE_ISR_EN_0;
|
|
}
|
|
} else if (msi) {
|
|
val &= ~HC_CONFIG_0_REG_INT_LINE_EN_0;
|
|
val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
|
|
HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
|
|
HC_CONFIG_0_REG_ATTN_BIT_EN_0);
|
|
} else {
|
|
val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
|
|
HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
|
|
HC_CONFIG_0_REG_INT_LINE_EN_0 |
|
|
HC_CONFIG_0_REG_ATTN_BIT_EN_0);
|
|
|
|
REG_WR(sc, addr, val);
|
|
|
|
val &= ~HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0;
|
|
}
|
|
|
|
REG_WR(sc, addr, val);
|
|
|
|
/* ensure that HC_CONFIG is written before leading/trailing edge config */
|
|
mb();
|
|
|
|
/* init leading/trailing edge */
|
|
if (IS_MF(sc)) {
|
|
val = (0xee0f | (1 << (SC_VN(sc) + 4)));
|
|
if (sc->port.pmf) {
|
|
/* enable nig and gpio3 attention */
|
|
val |= 0x1100;
|
|
}
|
|
} else {
|
|
val = 0xffff;
|
|
}
|
|
|
|
REG_WR(sc, (HC_REG_TRAILING_EDGE_0 + port * 8), val);
|
|
REG_WR(sc, (HC_REG_LEADING_EDGE_0 + port * 8), val);
|
|
|
|
/* make sure that interrupts are indeed enabled from here on */
|
|
mb();
|
|
}
|
|
|
|
static void bnx2x_igu_int_enable(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
uint8_t msix = (sc->interrupt_mode == INTR_MODE_MSIX)
|
|
|| (sc->interrupt_mode == INTR_MODE_SINGLE_MSIX);
|
|
uint8_t single_msix = (sc->interrupt_mode == INTR_MODE_SINGLE_MSIX);
|
|
uint8_t msi = (sc->interrupt_mode == INTR_MODE_MSI);
|
|
|
|
val = REG_RD(sc, IGU_REG_PF_CONFIGURATION);
|
|
|
|
if (msix) {
|
|
val &= ~(IGU_PF_CONF_INT_LINE_EN | IGU_PF_CONF_SINGLE_ISR_EN);
|
|
val |= (IGU_PF_CONF_MSI_MSIX_EN | IGU_PF_CONF_ATTN_BIT_EN);
|
|
if (single_msix) {
|
|
val |= IGU_PF_CONF_SINGLE_ISR_EN;
|
|
}
|
|
} else if (msi) {
|
|
val &= ~IGU_PF_CONF_INT_LINE_EN;
|
|
val |= (IGU_PF_CONF_MSI_MSIX_EN |
|
|
IGU_PF_CONF_ATTN_BIT_EN | IGU_PF_CONF_SINGLE_ISR_EN);
|
|
} else {
|
|
val &= ~IGU_PF_CONF_MSI_MSIX_EN;
|
|
val |= (IGU_PF_CONF_INT_LINE_EN |
|
|
IGU_PF_CONF_ATTN_BIT_EN | IGU_PF_CONF_SINGLE_ISR_EN);
|
|
}
|
|
|
|
/* clean previous status - need to configure igu prior to ack */
|
|
if ((!msix) || single_msix) {
|
|
REG_WR(sc, IGU_REG_PF_CONFIGURATION, val);
|
|
bnx2x_ack_int(sc);
|
|
}
|
|
|
|
val |= IGU_PF_CONF_FUNC_EN;
|
|
|
|
PMD_DRV_LOG(DEBUG, "write 0x%x to IGU mode %s",
|
|
val, ((msix) ? "MSI-X" : ((msi) ? "MSI" : "INTx")));
|
|
|
|
REG_WR(sc, IGU_REG_PF_CONFIGURATION, val);
|
|
|
|
mb();
|
|
|
|
/* init leading/trailing edge */
|
|
if (IS_MF(sc)) {
|
|
val = (0xee0f | (1 << (SC_VN(sc) + 4)));
|
|
if (sc->port.pmf) {
|
|
/* enable nig and gpio3 attention */
|
|
val |= 0x1100;
|
|
}
|
|
} else {
|
|
val = 0xffff;
|
|
}
|
|
|
|
REG_WR(sc, IGU_REG_TRAILING_EDGE_LATCH, val);
|
|
REG_WR(sc, IGU_REG_LEADING_EDGE_LATCH, val);
|
|
|
|
/* make sure that interrupts are indeed enabled from here on */
|
|
mb();
|
|
}
|
|
|
|
static void bnx2x_int_enable(struct bnx2x_softc *sc)
|
|
{
|
|
if (sc->devinfo.int_block == INT_BLOCK_HC) {
|
|
bnx2x_hc_int_enable(sc);
|
|
} else {
|
|
bnx2x_igu_int_enable(sc);
|
|
}
|
|
}
|
|
|
|
static void bnx2x_hc_int_disable(struct bnx2x_softc *sc)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
uint32_t addr = (port) ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0;
|
|
uint32_t val = REG_RD(sc, addr);
|
|
|
|
val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
|
|
HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
|
|
HC_CONFIG_0_REG_INT_LINE_EN_0 | HC_CONFIG_0_REG_ATTN_BIT_EN_0);
|
|
/* flush all outstanding writes */
|
|
mb();
|
|
|
|
REG_WR(sc, addr, val);
|
|
if (REG_RD(sc, addr) != val) {
|
|
PMD_DRV_LOG(ERR, "proper val not read from HC IGU!");
|
|
}
|
|
}
|
|
|
|
static void bnx2x_igu_int_disable(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t val = REG_RD(sc, IGU_REG_PF_CONFIGURATION);
|
|
|
|
val &= ~(IGU_PF_CONF_MSI_MSIX_EN |
|
|
IGU_PF_CONF_INT_LINE_EN | IGU_PF_CONF_ATTN_BIT_EN);
|
|
|
|
PMD_DRV_LOG(DEBUG, "write %x to IGU", val);
|
|
|
|
/* flush all outstanding writes */
|
|
mb();
|
|
|
|
REG_WR(sc, IGU_REG_PF_CONFIGURATION, val);
|
|
if (REG_RD(sc, IGU_REG_PF_CONFIGURATION) != val) {
|
|
PMD_DRV_LOG(ERR, "proper val not read from IGU!");
|
|
}
|
|
}
|
|
|
|
static void bnx2x_int_disable(struct bnx2x_softc *sc)
|
|
{
|
|
if (sc->devinfo.int_block == INT_BLOCK_HC) {
|
|
bnx2x_hc_int_disable(sc);
|
|
} else {
|
|
bnx2x_igu_int_disable(sc);
|
|
}
|
|
}
|
|
|
|
static void bnx2x_nic_init(struct bnx2x_softc *sc, int load_code)
|
|
{
|
|
int i;
|
|
|
|
PMD_INIT_FUNC_TRACE();
|
|
|
|
for (i = 0; i < sc->num_queues; i++) {
|
|
bnx2x_init_eth_fp(sc, i);
|
|
}
|
|
|
|
rmb(); /* ensure status block indices were read */
|
|
|
|
bnx2x_init_rx_rings(sc);
|
|
bnx2x_init_tx_rings(sc);
|
|
|
|
if (IS_VF(sc)) {
|
|
bnx2x_memset_stats(sc);
|
|
return;
|
|
}
|
|
|
|
/* initialize MOD_ABS interrupts */
|
|
elink_init_mod_abs_int(sc, &sc->link_vars,
|
|
sc->devinfo.chip_id,
|
|
sc->devinfo.shmem_base,
|
|
sc->devinfo.shmem2_base, SC_PORT(sc));
|
|
|
|
bnx2x_init_def_sb(sc);
|
|
bnx2x_update_dsb_idx(sc);
|
|
bnx2x_init_sp_ring(sc);
|
|
bnx2x_init_eq_ring(sc);
|
|
bnx2x_init_internal(sc, load_code);
|
|
bnx2x_pf_init(sc);
|
|
bnx2x_stats_init(sc);
|
|
|
|
/* flush all before enabling interrupts */
|
|
mb();
|
|
|
|
bnx2x_int_enable(sc);
|
|
|
|
/* check for SPIO5 */
|
|
bnx2x_attn_int_deasserted0(sc,
|
|
REG_RD(sc,
|
|
(MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 +
|
|
SC_PORT(sc) * 4)) &
|
|
AEU_INPUTS_ATTN_BITS_SPIO5);
|
|
}
|
|
|
|
static void bnx2x_init_objs(struct bnx2x_softc *sc)
|
|
{
|
|
/* mcast rules must be added to tx if tx switching is enabled */
|
|
ecore_obj_type o_type;
|
|
if (sc->flags & BNX2X_TX_SWITCHING)
|
|
o_type = ECORE_OBJ_TYPE_RX_TX;
|
|
else
|
|
o_type = ECORE_OBJ_TYPE_RX;
|
|
|
|
/* RX_MODE controlling object */
|
|
ecore_init_rx_mode_obj(sc, &sc->rx_mode_obj);
|
|
|
|
/* multicast configuration controlling object */
|
|
ecore_init_mcast_obj(sc,
|
|
&sc->mcast_obj,
|
|
sc->fp[0].cl_id,
|
|
sc->fp[0].index,
|
|
SC_FUNC(sc),
|
|
SC_FUNC(sc),
|
|
BNX2X_SP(sc, mcast_rdata),
|
|
(phys_addr_t)BNX2X_SP_MAPPING(sc, mcast_rdata),
|
|
ECORE_FILTER_MCAST_PENDING,
|
|
&sc->sp_state, o_type);
|
|
|
|
/* Setup CAM credit pools */
|
|
ecore_init_mac_credit_pool(sc,
|
|
&sc->macs_pool,
|
|
SC_FUNC(sc),
|
|
CHIP_IS_E1x(sc) ? VNICS_PER_PORT(sc) :
|
|
VNICS_PER_PATH(sc));
|
|
|
|
ecore_init_vlan_credit_pool(sc,
|
|
&sc->vlans_pool,
|
|
SC_ABS_FUNC(sc) >> 1,
|
|
CHIP_IS_E1x(sc) ? VNICS_PER_PORT(sc) :
|
|
VNICS_PER_PATH(sc));
|
|
|
|
/* RSS configuration object */
|
|
ecore_init_rss_config_obj(&sc->rss_conf_obj,
|
|
sc->fp[0].cl_id,
|
|
sc->fp[0].index,
|
|
SC_FUNC(sc),
|
|
SC_FUNC(sc),
|
|
BNX2X_SP(sc, rss_rdata),
|
|
(phys_addr_t)BNX2X_SP_MAPPING(sc, rss_rdata),
|
|
ECORE_FILTER_RSS_CONF_PENDING,
|
|
&sc->sp_state, ECORE_OBJ_TYPE_RX);
|
|
}
|
|
|
|
/*
|
|
* Initialize the function. This must be called before sending CLIENT_SETUP
|
|
* for the first client.
|
|
*/
|
|
static int bnx2x_func_start(struct bnx2x_softc *sc)
|
|
{
|
|
struct ecore_func_state_params func_params = { NULL };
|
|
struct ecore_func_start_params *start_params =
|
|
&func_params.params.start;
|
|
|
|
/* Prepare parameters for function state transitions */
|
|
bnx2x_set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
|
|
|
|
func_params.f_obj = &sc->func_obj;
|
|
func_params.cmd = ECORE_F_CMD_START;
|
|
|
|
/* Function parameters */
|
|
start_params->mf_mode = sc->devinfo.mf_info.mf_mode;
|
|
start_params->sd_vlan_tag = OVLAN(sc);
|
|
|
|
if (CHIP_IS_E2(sc) || CHIP_IS_E3(sc)) {
|
|
start_params->network_cos_mode = STATIC_COS;
|
|
} else { /* CHIP_IS_E1X */
|
|
start_params->network_cos_mode = FW_WRR;
|
|
}
|
|
|
|
start_params->gre_tunnel_mode = 0;
|
|
start_params->gre_tunnel_rss = 0;
|
|
|
|
return ecore_func_state_change(sc, &func_params);
|
|
}
|
|
|
|
static int bnx2x_set_power_state(struct bnx2x_softc *sc, uint8_t state)
|
|
{
|
|
uint16_t pmcsr;
|
|
|
|
/* If there is no power capability, silently succeed */
|
|
if (!(sc->devinfo.pcie_cap_flags & BNX2X_PM_CAPABLE_FLAG)) {
|
|
PMD_DRV_LOG(WARNING, "No power capability");
|
|
return 0;
|
|
}
|
|
|
|
pci_read(sc, (sc->devinfo.pcie_pm_cap_reg + PCIR_POWER_STATUS), &pmcsr,
|
|
2);
|
|
|
|
switch (state) {
|
|
case PCI_PM_D0:
|
|
pci_write_word(sc,
|
|
(sc->devinfo.pcie_pm_cap_reg +
|
|
PCIR_POWER_STATUS),
|
|
((pmcsr & ~PCIM_PSTAT_DMASK) | PCIM_PSTAT_PME));
|
|
|
|
if (pmcsr & PCIM_PSTAT_DMASK) {
|
|
/* delay required during transition out of D3hot */
|
|
DELAY(20000);
|
|
}
|
|
|
|
break;
|
|
|
|
case PCI_PM_D3hot:
|
|
/* don't shut down the power for emulation and FPGA */
|
|
if (CHIP_REV_IS_SLOW(sc)) {
|
|
return 0;
|
|
}
|
|
|
|
pmcsr &= ~PCIM_PSTAT_DMASK;
|
|
pmcsr |= PCIM_PSTAT_D3;
|
|
|
|
if (sc->wol) {
|
|
pmcsr |= PCIM_PSTAT_PMEENABLE;
|
|
}
|
|
|
|
pci_write_long(sc,
|
|
(sc->devinfo.pcie_pm_cap_reg +
|
|
PCIR_POWER_STATUS), pmcsr);
|
|
|
|
/*
|
|
* No more memory access after this point until device is brought back
|
|
* to D0 state.
|
|
*/
|
|
break;
|
|
|
|
default:
|
|
PMD_DRV_LOG(NOTICE, "Can't support PCI power state = %d",
|
|
state);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* return true if succeeded to acquire the lock */
|
|
static uint8_t bnx2x_trylock_hw_lock(struct bnx2x_softc *sc, uint32_t resource)
|
|
{
|
|
uint32_t lock_status;
|
|
uint32_t resource_bit = (1 << resource);
|
|
int func = SC_FUNC(sc);
|
|
uint32_t hw_lock_control_reg;
|
|
|
|
/* Validating that the resource is within range */
|
|
if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
|
|
PMD_DRV_LOG(INFO,
|
|
"resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)",
|
|
resource, HW_LOCK_MAX_RESOURCE_VALUE);
|
|
return FALSE;
|
|
}
|
|
|
|
if (func <= 5) {
|
|
hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func * 8);
|
|
} else {
|
|
hw_lock_control_reg =
|
|
(MISC_REG_DRIVER_CONTROL_7 + (func - 6) * 8);
|
|
}
|
|
|
|
/* try to acquire the lock */
|
|
REG_WR(sc, hw_lock_control_reg + 4, resource_bit);
|
|
lock_status = REG_RD(sc, hw_lock_control_reg);
|
|
if (lock_status & resource_bit) {
|
|
return TRUE;
|
|
}
|
|
|
|
PMD_DRV_LOG(NOTICE, "Failed to get a resource lock 0x%x", resource);
|
|
|
|
return FALSE;
|
|
}
|
|
|
|
/*
|
|
* Get the recovery leader resource id according to the engine this function
|
|
* belongs to. Currently only only 2 engines is supported.
|
|
*/
|
|
static int bnx2x_get_leader_lock_resource(struct bnx2x_softc *sc)
|
|
{
|
|
if (SC_PATH(sc)) {
|
|
return HW_LOCK_RESOURCE_RECOVERY_LEADER_1;
|
|
} else {
|
|
return HW_LOCK_RESOURCE_RECOVERY_LEADER_0;
|
|
}
|
|
}
|
|
|
|
/* try to acquire a leader lock for current engine */
|
|
static uint8_t bnx2x_trylock_leader_lock(struct bnx2x_softc *sc)
|
|
{
|
|
return bnx2x_trylock_hw_lock(sc, bnx2x_get_leader_lock_resource(sc));
|
|
}
|
|
|
|
static int bnx2x_release_leader_lock(struct bnx2x_softc *sc)
|
|
{
|
|
return bnx2x_release_hw_lock(sc, bnx2x_get_leader_lock_resource(sc));
|
|
}
|
|
|
|
/* close gates #2, #3 and #4 */
|
|
static void bnx2x_set_234_gates(struct bnx2x_softc *sc, uint8_t close)
|
|
{
|
|
uint32_t val;
|
|
|
|
/* gates #2 and #4a are closed/opened */
|
|
/* #4 */
|
|
REG_WR(sc, PXP_REG_HST_DISCARD_DOORBELLS, ! !close);
|
|
/* #2 */
|
|
REG_WR(sc, PXP_REG_HST_DISCARD_INTERNAL_WRITES, ! !close);
|
|
|
|
/* #3 */
|
|
if (CHIP_IS_E1x(sc)) {
|
|
/* prevent interrupts from HC on both ports */
|
|
val = REG_RD(sc, HC_REG_CONFIG_1);
|
|
if (close)
|
|
REG_WR(sc, HC_REG_CONFIG_1, (val & ~(uint32_t)
|
|
HC_CONFIG_1_REG_BLOCK_DISABLE_1));
|
|
else
|
|
REG_WR(sc, HC_REG_CONFIG_1,
|
|
(val | HC_CONFIG_1_REG_BLOCK_DISABLE_1));
|
|
|
|
val = REG_RD(sc, HC_REG_CONFIG_0);
|
|
if (close)
|
|
REG_WR(sc, HC_REG_CONFIG_0, (val & ~(uint32_t)
|
|
HC_CONFIG_0_REG_BLOCK_DISABLE_0));
|
|
else
|
|
REG_WR(sc, HC_REG_CONFIG_0,
|
|
(val | HC_CONFIG_0_REG_BLOCK_DISABLE_0));
|
|
|
|
} else {
|
|
/* Prevent incomming interrupts in IGU */
|
|
val = REG_RD(sc, IGU_REG_BLOCK_CONFIGURATION);
|
|
|
|
if (close)
|
|
REG_WR(sc, IGU_REG_BLOCK_CONFIGURATION,
|
|
(val & ~(uint32_t)
|
|
IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE));
|
|
else
|
|
REG_WR(sc, IGU_REG_BLOCK_CONFIGURATION,
|
|
(val |
|
|
IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE));
|
|
}
|
|
|
|
wmb();
|
|
}
|
|
|
|
/* poll for pending writes bit, it should get cleared in no more than 1s */
|
|
static int bnx2x_er_poll_igu_vq(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t cnt = 1000;
|
|
uint32_t pend_bits = 0;
|
|
|
|
do {
|
|
pend_bits = REG_RD(sc, IGU_REG_PENDING_BITS_STATUS);
|
|
|
|
if (pend_bits == 0) {
|
|
break;
|
|
}
|
|
|
|
DELAY(1000);
|
|
} while (cnt-- > 0);
|
|
|
|
if (cnt <= 0) {
|
|
PMD_DRV_LOG(NOTICE, "Still pending IGU requests bits=0x%08x!",
|
|
pend_bits);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define SHARED_MF_CLP_MAGIC 0x80000000 /* 'magic' bit */
|
|
|
|
static void bnx2x_clp_reset_prep(struct bnx2x_softc *sc, uint32_t * magic_val)
|
|
{
|
|
/* Do some magic... */
|
|
uint32_t val = MFCFG_RD(sc, shared_mf_config.clp_mb);
|
|
*magic_val = val & SHARED_MF_CLP_MAGIC;
|
|
MFCFG_WR(sc, shared_mf_config.clp_mb, val | SHARED_MF_CLP_MAGIC);
|
|
}
|
|
|
|
/* restore the value of the 'magic' bit */
|
|
static void bnx2x_clp_reset_done(struct bnx2x_softc *sc, uint32_t magic_val)
|
|
{
|
|
/* Restore the 'magic' bit value... */
|
|
uint32_t val = MFCFG_RD(sc, shared_mf_config.clp_mb);
|
|
MFCFG_WR(sc, shared_mf_config.clp_mb,
|
|
(val & (~SHARED_MF_CLP_MAGIC)) | magic_val);
|
|
}
|
|
|
|
/* prepare for MCP reset, takes care of CLP configurations */
|
|
static void bnx2x_reset_mcp_prep(struct bnx2x_softc *sc, uint32_t * magic_val)
|
|
{
|
|
uint32_t shmem;
|
|
uint32_t validity_offset;
|
|
|
|
/* set `magic' bit in order to save MF config */
|
|
bnx2x_clp_reset_prep(sc, magic_val);
|
|
|
|
/* get shmem offset */
|
|
shmem = REG_RD(sc, MISC_REG_SHARED_MEM_ADDR);
|
|
validity_offset =
|
|
offsetof(struct shmem_region, validity_map[SC_PORT(sc)]);
|
|
|
|
/* Clear validity map flags */
|
|
if (shmem > 0) {
|
|
REG_WR(sc, shmem + validity_offset, 0);
|
|
}
|
|
}
|
|
|
|
#define MCP_TIMEOUT 5000 /* 5 seconds (in ms) */
|
|
#define MCP_ONE_TIMEOUT 100 /* 100 ms */
|
|
|
|
static void bnx2x_mcp_wait_one(struct bnx2x_softc *sc)
|
|
{
|
|
/* special handling for emulation and FPGA (10 times longer) */
|
|
if (CHIP_REV_IS_SLOW(sc)) {
|
|
DELAY((MCP_ONE_TIMEOUT * 10) * 1000);
|
|
} else {
|
|
DELAY((MCP_ONE_TIMEOUT) * 1000);
|
|
}
|
|
}
|
|
|
|
/* initialize shmem_base and waits for validity signature to appear */
|
|
static int bnx2x_init_shmem(struct bnx2x_softc *sc)
|
|
{
|
|
int cnt = 0;
|
|
uint32_t val = 0;
|
|
|
|
do {
|
|
sc->devinfo.shmem_base =
|
|
sc->link_params.shmem_base =
|
|
REG_RD(sc, MISC_REG_SHARED_MEM_ADDR);
|
|
|
|
if (sc->devinfo.shmem_base) {
|
|
val = SHMEM_RD(sc, validity_map[SC_PORT(sc)]);
|
|
if (val & SHR_MEM_VALIDITY_MB)
|
|
return 0;
|
|
}
|
|
|
|
bnx2x_mcp_wait_one(sc);
|
|
|
|
} while (cnt++ < (MCP_TIMEOUT / MCP_ONE_TIMEOUT));
|
|
|
|
PMD_DRV_LOG(NOTICE, "BAD MCP validity signature");
|
|
|
|
return -1;
|
|
}
|
|
|
|
static int bnx2x_reset_mcp_comp(struct bnx2x_softc *sc, uint32_t magic_val)
|
|
{
|
|
int rc = bnx2x_init_shmem(sc);
|
|
|
|
/* Restore the `magic' bit value */
|
|
bnx2x_clp_reset_done(sc, magic_val);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void bnx2x_pxp_prep(struct bnx2x_softc *sc)
|
|
{
|
|
REG_WR(sc, PXP2_REG_RD_START_INIT, 0);
|
|
REG_WR(sc, PXP2_REG_RQ_RBC_DONE, 0);
|
|
wmb();
|
|
}
|
|
|
|
/*
|
|
* Reset the whole chip except for:
|
|
* - PCIE core
|
|
* - PCI Glue, PSWHST, PXP/PXP2 RF (all controlled by one reset bit)
|
|
* - IGU
|
|
* - MISC (including AEU)
|
|
* - GRC
|
|
* - RBCN, RBCP
|
|
*/
|
|
static void bnx2x_process_kill_chip_reset(struct bnx2x_softc *sc, uint8_t global)
|
|
{
|
|
uint32_t not_reset_mask1, reset_mask1, not_reset_mask2, reset_mask2;
|
|
uint32_t global_bits2, stay_reset2;
|
|
|
|
/*
|
|
* Bits that have to be set in reset_mask2 if we want to reset 'global'
|
|
* (per chip) blocks.
|
|
*/
|
|
global_bits2 =
|
|
MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CPU |
|
|
MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CORE;
|
|
|
|
/*
|
|
* Don't reset the following blocks.
|
|
* Important: per port blocks (such as EMAC, BMAC, UMAC) can't be
|
|
* reset, as in 4 port device they might still be owned
|
|
* by the MCP (there is only one leader per path).
|
|
*/
|
|
not_reset_mask1 =
|
|
MISC_REGISTERS_RESET_REG_1_RST_HC |
|
|
MISC_REGISTERS_RESET_REG_1_RST_PXPV |
|
|
MISC_REGISTERS_RESET_REG_1_RST_PXP;
|
|
|
|
not_reset_mask2 =
|
|
MISC_REGISTERS_RESET_REG_2_RST_PCI_MDIO |
|
|
MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE |
|
|
MISC_REGISTERS_RESET_REG_2_RST_EMAC1_HARD_CORE |
|
|
MISC_REGISTERS_RESET_REG_2_RST_MISC_CORE |
|
|
MISC_REGISTERS_RESET_REG_2_RST_RBCN |
|
|
MISC_REGISTERS_RESET_REG_2_RST_GRC |
|
|
MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_REG_HARD_CORE |
|
|
MISC_REGISTERS_RESET_REG_2_RST_MCP_N_HARD_CORE_RST_B |
|
|
MISC_REGISTERS_RESET_REG_2_RST_ATC |
|
|
MISC_REGISTERS_RESET_REG_2_PGLC |
|
|
MISC_REGISTERS_RESET_REG_2_RST_BMAC0 |
|
|
MISC_REGISTERS_RESET_REG_2_RST_BMAC1 |
|
|
MISC_REGISTERS_RESET_REG_2_RST_EMAC0 |
|
|
MISC_REGISTERS_RESET_REG_2_RST_EMAC1 |
|
|
MISC_REGISTERS_RESET_REG_2_UMAC0 | MISC_REGISTERS_RESET_REG_2_UMAC1;
|
|
|
|
/*
|
|
* Keep the following blocks in reset:
|
|
* - all xxMACs are handled by the elink code.
|
|
*/
|
|
stay_reset2 =
|
|
MISC_REGISTERS_RESET_REG_2_XMAC |
|
|
MISC_REGISTERS_RESET_REG_2_XMAC_SOFT;
|
|
|
|
/* Full reset masks according to the chip */
|
|
reset_mask1 = 0xffffffff;
|
|
|
|
if (CHIP_IS_E1H(sc))
|
|
reset_mask2 = 0x1ffff;
|
|
else if (CHIP_IS_E2(sc))
|
|
reset_mask2 = 0xfffff;
|
|
else /* CHIP_IS_E3 */
|
|
reset_mask2 = 0x3ffffff;
|
|
|
|
/* Don't reset global blocks unless we need to */
|
|
if (!global)
|
|
reset_mask2 &= ~global_bits2;
|
|
|
|
/*
|
|
* In case of attention in the QM, we need to reset PXP
|
|
* (MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR) before QM
|
|
* because otherwise QM reset would release 'close the gates' shortly
|
|
* before resetting the PXP, then the PSWRQ would send a write
|
|
* request to PGLUE. Then when PXP is reset, PGLUE would try to
|
|
* read the payload data from PSWWR, but PSWWR would not
|
|
* respond. The write queue in PGLUE would stuck, dmae commands
|
|
* would not return. Therefore it's important to reset the second
|
|
* reset register (containing the
|
|
* MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR bit) before the
|
|
* first one (containing the MISC_REGISTERS_RESET_REG_1_RST_QM
|
|
* bit).
|
|
*/
|
|
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
|
|
reset_mask2 & (~not_reset_mask2));
|
|
|
|
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
|
|
reset_mask1 & (~not_reset_mask1));
|
|
|
|
mb();
|
|
wmb();
|
|
|
|
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
|
|
reset_mask2 & (~stay_reset2));
|
|
|
|
mb();
|
|
wmb();
|
|
|
|
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, reset_mask1);
|
|
wmb();
|
|
}
|
|
|
|
static int bnx2x_process_kill(struct bnx2x_softc *sc, uint8_t global)
|
|
{
|
|
int cnt = 1000;
|
|
uint32_t val = 0;
|
|
uint32_t sr_cnt, blk_cnt, port_is_idle_0, port_is_idle_1, pgl_exp_rom2;
|
|
uint32_t tags_63_32 = 0;
|
|
|
|
/* Empty the Tetris buffer, wait for 1s */
|
|
do {
|
|
sr_cnt = REG_RD(sc, PXP2_REG_RD_SR_CNT);
|
|
blk_cnt = REG_RD(sc, PXP2_REG_RD_BLK_CNT);
|
|
port_is_idle_0 = REG_RD(sc, PXP2_REG_RD_PORT_IS_IDLE_0);
|
|
port_is_idle_1 = REG_RD(sc, PXP2_REG_RD_PORT_IS_IDLE_1);
|
|
pgl_exp_rom2 = REG_RD(sc, PXP2_REG_PGL_EXP_ROM2);
|
|
if (CHIP_IS_E3(sc)) {
|
|
tags_63_32 = REG_RD(sc, PGLUE_B_REG_TAGS_63_32);
|
|
}
|
|
|
|
if ((sr_cnt == 0x7e) && (blk_cnt == 0xa0) &&
|
|
((port_is_idle_0 & 0x1) == 0x1) &&
|
|
((port_is_idle_1 & 0x1) == 0x1) &&
|
|
(pgl_exp_rom2 == 0xffffffff) &&
|
|
(!CHIP_IS_E3(sc) || (tags_63_32 == 0xffffffff)))
|
|
break;
|
|
DELAY(1000);
|
|
} while (cnt-- > 0);
|
|
|
|
if (cnt <= 0) {
|
|
PMD_DRV_LOG(NOTICE,
|
|
"ERROR: Tetris buffer didn't get empty or there "
|
|
"are still outstanding read requests after 1s! "
|
|
"sr_cnt=0x%08x, blk_cnt=0x%08x, port_is_idle_0=0x%08x, "
|
|
"port_is_idle_1=0x%08x, pgl_exp_rom2=0x%08x",
|
|
sr_cnt, blk_cnt, port_is_idle_0, port_is_idle_1,
|
|
pgl_exp_rom2);
|
|
return -1;
|
|
}
|
|
|
|
mb();
|
|
|
|
/* Close gates #2, #3 and #4 */
|
|
bnx2x_set_234_gates(sc, TRUE);
|
|
|
|
/* Poll for IGU VQs for 57712 and newer chips */
|
|
if (!CHIP_IS_E1x(sc) && bnx2x_er_poll_igu_vq(sc)) {
|
|
return -1;
|
|
}
|
|
|
|
/* clear "unprepared" bit */
|
|
REG_WR(sc, MISC_REG_UNPREPARED, 0);
|
|
mb();
|
|
|
|
/* Make sure all is written to the chip before the reset */
|
|
wmb();
|
|
|
|
/*
|
|
* Wait for 1ms to empty GLUE and PCI-E core queues,
|
|
* PSWHST, GRC and PSWRD Tetris buffer.
|
|
*/
|
|
DELAY(1000);
|
|
|
|
/* Prepare to chip reset: */
|
|
/* MCP */
|
|
if (global) {
|
|
bnx2x_reset_mcp_prep(sc, &val);
|
|
}
|
|
|
|
/* PXP */
|
|
bnx2x_pxp_prep(sc);
|
|
mb();
|
|
|
|
/* reset the chip */
|
|
bnx2x_process_kill_chip_reset(sc, global);
|
|
mb();
|
|
|
|
/* Recover after reset: */
|
|
/* MCP */
|
|
if (global && bnx2x_reset_mcp_comp(sc, val)) {
|
|
return -1;
|
|
}
|
|
|
|
/* Open the gates #2, #3 and #4 */
|
|
bnx2x_set_234_gates(sc, FALSE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_leader_reset(struct bnx2x_softc *sc)
|
|
{
|
|
int rc = 0;
|
|
uint8_t global = bnx2x_reset_is_global(sc);
|
|
uint32_t load_code;
|
|
|
|
/*
|
|
* If not going to reset MCP, load "fake" driver to reset HW while
|
|
* driver is owner of the HW.
|
|
*/
|
|
if (!global && !BNX2X_NOMCP(sc)) {
|
|
load_code = bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_REQ,
|
|
DRV_MSG_CODE_LOAD_REQ_WITH_LFA);
|
|
if (!load_code) {
|
|
PMD_DRV_LOG(NOTICE, "MCP response failure, aborting");
|
|
rc = -1;
|
|
goto exit_leader_reset;
|
|
}
|
|
|
|
if ((load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) &&
|
|
(load_code != FW_MSG_CODE_DRV_LOAD_COMMON)) {
|
|
PMD_DRV_LOG(NOTICE,
|
|
"MCP unexpected response, aborting");
|
|
rc = -1;
|
|
goto exit_leader_reset2;
|
|
}
|
|
|
|
load_code = bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_DONE, 0);
|
|
if (!load_code) {
|
|
PMD_DRV_LOG(NOTICE, "MCP response failure, aborting");
|
|
rc = -1;
|
|
goto exit_leader_reset2;
|
|
}
|
|
}
|
|
|
|
/* try to recover after the failure */
|
|
if (bnx2x_process_kill(sc, global)) {
|
|
PMD_DRV_LOG(NOTICE, "Something bad occurred on engine %d!",
|
|
SC_PATH(sc));
|
|
rc = -1;
|
|
goto exit_leader_reset2;
|
|
}
|
|
|
|
/*
|
|
* Clear the RESET_IN_PROGRESS and RESET_GLOBAL bits and update the driver
|
|
* state.
|
|
*/
|
|
bnx2x_set_reset_done(sc);
|
|
if (global) {
|
|
bnx2x_clear_reset_global(sc);
|
|
}
|
|
|
|
exit_leader_reset2:
|
|
|
|
/* unload "fake driver" if it was loaded */
|
|
if (!global &&!BNX2X_NOMCP(sc)) {
|
|
bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP, 0);
|
|
bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_DONE, 0);
|
|
}
|
|
|
|
exit_leader_reset:
|
|
|
|
sc->is_leader = 0;
|
|
bnx2x_release_leader_lock(sc);
|
|
|
|
mb();
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* prepare INIT transition, parameters configured:
|
|
* - HC configuration
|
|
* - Queue's CDU context
|
|
*/
|
|
static void
|
|
bnx2x_pf_q_prep_init(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
|
|
struct ecore_queue_init_params *init_params)
|
|
{
|
|
uint8_t cos;
|
|
int cxt_index, cxt_offset;
|
|
|
|
bnx2x_set_bit(ECORE_Q_FLG_HC, &init_params->rx.flags);
|
|
bnx2x_set_bit(ECORE_Q_FLG_HC, &init_params->tx.flags);
|
|
|
|
bnx2x_set_bit(ECORE_Q_FLG_HC_EN, &init_params->rx.flags);
|
|
bnx2x_set_bit(ECORE_Q_FLG_HC_EN, &init_params->tx.flags);
|
|
|
|
/* HC rate */
|
|
init_params->rx.hc_rate =
|
|
sc->hc_rx_ticks ? (1000000 / sc->hc_rx_ticks) : 0;
|
|
init_params->tx.hc_rate =
|
|
sc->hc_tx_ticks ? (1000000 / sc->hc_tx_ticks) : 0;
|
|
|
|
/* FW SB ID */
|
|
init_params->rx.fw_sb_id = init_params->tx.fw_sb_id = fp->fw_sb_id;
|
|
|
|
/* CQ index among the SB indices */
|
|
init_params->rx.sb_cq_index = HC_INDEX_ETH_RX_CQ_CONS;
|
|
init_params->tx.sb_cq_index = HC_INDEX_ETH_FIRST_TX_CQ_CONS;
|
|
|
|
/* set maximum number of COSs supported by this queue */
|
|
init_params->max_cos = sc->max_cos;
|
|
|
|
/* set the context pointers queue object */
|
|
for (cos = FIRST_TX_COS_INDEX; cos < init_params->max_cos; cos++) {
|
|
cxt_index = fp->index / ILT_PAGE_CIDS;
|
|
cxt_offset = fp->index - (cxt_index * ILT_PAGE_CIDS);
|
|
init_params->cxts[cos] =
|
|
&sc->context[cxt_index].vcxt[cxt_offset].eth;
|
|
}
|
|
}
|
|
|
|
/* set flags that are common for the Tx-only and not normal connections */
|
|
static unsigned long
|
|
bnx2x_get_common_flags(struct bnx2x_softc *sc, uint8_t zero_stats)
|
|
{
|
|
unsigned long flags = 0;
|
|
|
|
/* PF driver will always initialize the Queue to an ACTIVE state */
|
|
bnx2x_set_bit(ECORE_Q_FLG_ACTIVE, &flags);
|
|
|
|
/*
|
|
* tx only connections collect statistics (on the same index as the
|
|
* parent connection). The statistics are zeroed when the parent
|
|
* connection is initialized.
|
|
*/
|
|
|
|
bnx2x_set_bit(ECORE_Q_FLG_STATS, &flags);
|
|
if (zero_stats) {
|
|
bnx2x_set_bit(ECORE_Q_FLG_ZERO_STATS, &flags);
|
|
}
|
|
|
|
/*
|
|
* tx only connections can support tx-switching, though their
|
|
* CoS-ness doesn't survive the loopback
|
|
*/
|
|
if (sc->flags & BNX2X_TX_SWITCHING) {
|
|
bnx2x_set_bit(ECORE_Q_FLG_TX_SWITCH, &flags);
|
|
}
|
|
|
|
bnx2x_set_bit(ECORE_Q_FLG_PCSUM_ON_PKT, &flags);
|
|
|
|
return flags;
|
|
}
|
|
|
|
static unsigned long bnx2x_get_q_flags(struct bnx2x_softc *sc, uint8_t leading)
|
|
{
|
|
unsigned long flags = 0;
|
|
|
|
if (IS_MF_SD(sc)) {
|
|
bnx2x_set_bit(ECORE_Q_FLG_OV, &flags);
|
|
}
|
|
|
|
if (leading) {
|
|
bnx2x_set_bit(ECORE_Q_FLG_LEADING_RSS, &flags);
|
|
bnx2x_set_bit(ECORE_Q_FLG_MCAST, &flags);
|
|
}
|
|
|
|
bnx2x_set_bit(ECORE_Q_FLG_VLAN, &flags);
|
|
|
|
/* merge with common flags */
|
|
return flags | bnx2x_get_common_flags(sc, TRUE);
|
|
}
|
|
|
|
static void
|
|
bnx2x_pf_q_prep_general(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
|
|
struct ecore_general_setup_params *gen_init, uint8_t cos)
|
|
{
|
|
gen_init->stat_id = bnx2x_stats_id(fp);
|
|
gen_init->spcl_id = fp->cl_id;
|
|
gen_init->mtu = sc->mtu;
|
|
gen_init->cos = cos;
|
|
}
|
|
|
|
static void
|
|
bnx2x_pf_rx_q_prep(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
|
|
struct rxq_pause_params *pause,
|
|
struct ecore_rxq_setup_params *rxq_init)
|
|
{
|
|
struct bnx2x_rx_queue *rxq;
|
|
|
|
rxq = sc->rx_queues[fp->index];
|
|
if (!rxq) {
|
|
PMD_RX_LOG(ERR, "RX queue is NULL");
|
|
return;
|
|
}
|
|
/* pause */
|
|
pause->bd_th_lo = BD_TH_LO(sc);
|
|
pause->bd_th_hi = BD_TH_HI(sc);
|
|
|
|
pause->rcq_th_lo = RCQ_TH_LO(sc);
|
|
pause->rcq_th_hi = RCQ_TH_HI(sc);
|
|
|
|
/* validate rings have enough entries to cross high thresholds */
|
|
if (sc->dropless_fc &&
|
|
pause->bd_th_hi + FW_PREFETCH_CNT > sc->rx_ring_size) {
|
|
PMD_DRV_LOG(WARNING, "rx bd ring threshold limit");
|
|
}
|
|
|
|
if (sc->dropless_fc &&
|
|
pause->rcq_th_hi + FW_PREFETCH_CNT > USABLE_RCQ_ENTRIES(rxq)) {
|
|
PMD_DRV_LOG(WARNING, "rcq ring threshold limit");
|
|
}
|
|
|
|
pause->pri_map = 1;
|
|
|
|
/* rxq setup */
|
|
rxq_init->dscr_map = (phys_addr_t)rxq->rx_ring_phys_addr;
|
|
rxq_init->rcq_map = (phys_addr_t)rxq->cq_ring_phys_addr;
|
|
rxq_init->rcq_np_map = (phys_addr_t)(rxq->cq_ring_phys_addr +
|
|
BNX2X_PAGE_SIZE);
|
|
|
|
/*
|
|
* This should be a maximum number of data bytes that may be
|
|
* placed on the BD (not including paddings).
|
|
*/
|
|
rxq_init->buf_sz = (fp->rx_buf_size - IP_HEADER_ALIGNMENT_PADDING);
|
|
|
|
rxq_init->cl_qzone_id = fp->cl_qzone_id;
|
|
rxq_init->rss_engine_id = SC_FUNC(sc);
|
|
rxq_init->mcast_engine_id = SC_FUNC(sc);
|
|
|
|
rxq_init->cache_line_log = BNX2X_RX_ALIGN_SHIFT;
|
|
rxq_init->fw_sb_id = fp->fw_sb_id;
|
|
|
|
rxq_init->sb_cq_index = HC_INDEX_ETH_RX_CQ_CONS;
|
|
|
|
/*
|
|
* configure silent vlan removal
|
|
* if multi function mode is afex, then mask default vlan
|
|
*/
|
|
if (IS_MF_AFEX(sc)) {
|
|
rxq_init->silent_removal_value =
|
|
sc->devinfo.mf_info.afex_def_vlan_tag;
|
|
rxq_init->silent_removal_mask = EVL_VLID_MASK;
|
|
}
|
|
}
|
|
|
|
static void
|
|
bnx2x_pf_tx_q_prep(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
|
|
struct ecore_txq_setup_params *txq_init, uint8_t cos)
|
|
{
|
|
struct bnx2x_tx_queue *txq = fp->sc->tx_queues[fp->index];
|
|
|
|
if (!txq) {
|
|
PMD_TX_LOG(ERR, "ERROR: TX queue is NULL");
|
|
return;
|
|
}
|
|
txq_init->dscr_map = (phys_addr_t)txq->tx_ring_phys_addr;
|
|
txq_init->sb_cq_index = HC_INDEX_ETH_FIRST_TX_CQ_CONS + cos;
|
|
txq_init->traffic_type = LLFC_TRAFFIC_TYPE_NW;
|
|
txq_init->fw_sb_id = fp->fw_sb_id;
|
|
|
|
/*
|
|
* set the TSS leading client id for TX classfication to the
|
|
* leading RSS client id
|
|
*/
|
|
txq_init->tss_leading_cl_id = BNX2X_FP(sc, 0, cl_id);
|
|
}
|
|
|
|
/*
|
|
* This function performs 2 steps in a queue state machine:
|
|
* 1) RESET->INIT
|
|
* 2) INIT->SETUP
|
|
*/
|
|
static int
|
|
bnx2x_setup_queue(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp, uint8_t leading)
|
|
{
|
|
struct ecore_queue_state_params q_params = { NULL };
|
|
struct ecore_queue_setup_params *setup_params = &q_params.params.setup;
|
|
int rc;
|
|
|
|
PMD_DRV_LOG(DEBUG, "setting up queue %d", fp->index);
|
|
|
|
bnx2x_ack_sb(sc, fp->igu_sb_id, USTORM_ID, 0, IGU_INT_ENABLE, 0);
|
|
|
|
q_params.q_obj = &BNX2X_SP_OBJ(sc, fp).q_obj;
|
|
|
|
/* we want to wait for completion in this context */
|
|
bnx2x_set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags);
|
|
|
|
/* prepare the INIT parameters */
|
|
bnx2x_pf_q_prep_init(sc, fp, &q_params.params.init);
|
|
|
|
/* Set the command */
|
|
q_params.cmd = ECORE_Q_CMD_INIT;
|
|
|
|
/* Change the state to INIT */
|
|
rc = ecore_queue_state_change(sc, &q_params);
|
|
if (rc) {
|
|
PMD_DRV_LOG(NOTICE, "Queue(%d) INIT failed", fp->index);
|
|
return rc;
|
|
}
|
|
|
|
PMD_DRV_LOG(DEBUG, "init complete");
|
|
|
|
/* now move the Queue to the SETUP state */
|
|
memset(setup_params, 0, sizeof(*setup_params));
|
|
|
|
/* set Queue flags */
|
|
setup_params->flags = bnx2x_get_q_flags(sc, leading);
|
|
|
|
/* set general SETUP parameters */
|
|
bnx2x_pf_q_prep_general(sc, fp, &setup_params->gen_params,
|
|
FIRST_TX_COS_INDEX);
|
|
|
|
bnx2x_pf_rx_q_prep(sc, fp,
|
|
&setup_params->pause_params,
|
|
&setup_params->rxq_params);
|
|
|
|
bnx2x_pf_tx_q_prep(sc, fp, &setup_params->txq_params, FIRST_TX_COS_INDEX);
|
|
|
|
/* Set the command */
|
|
q_params.cmd = ECORE_Q_CMD_SETUP;
|
|
|
|
/* change the state to SETUP */
|
|
rc = ecore_queue_state_change(sc, &q_params);
|
|
if (rc) {
|
|
PMD_DRV_LOG(NOTICE, "Queue(%d) SETUP failed", fp->index);
|
|
return rc;
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int bnx2x_setup_leading(struct bnx2x_softc *sc)
|
|
{
|
|
if (IS_PF(sc))
|
|
return bnx2x_setup_queue(sc, &sc->fp[0], TRUE);
|
|
else /* VF */
|
|
return bnx2x_vf_setup_queue(sc, &sc->fp[0], TRUE);
|
|
}
|
|
|
|
static int
|
|
bnx2x_config_rss_pf(struct bnx2x_softc *sc, struct ecore_rss_config_obj *rss_obj,
|
|
uint8_t config_hash)
|
|
{
|
|
struct ecore_config_rss_params params = { NULL };
|
|
uint32_t i;
|
|
|
|
/*
|
|
* Although RSS is meaningless when there is a single HW queue we
|
|
* still need it enabled in order to have HW Rx hash generated.
|
|
*/
|
|
|
|
params.rss_obj = rss_obj;
|
|
|
|
bnx2x_set_bit(RAMROD_COMP_WAIT, ¶ms.ramrod_flags);
|
|
|
|
bnx2x_set_bit(ECORE_RSS_MODE_REGULAR, ¶ms.rss_flags);
|
|
|
|
/* RSS configuration */
|
|
bnx2x_set_bit(ECORE_RSS_IPV4, ¶ms.rss_flags);
|
|
bnx2x_set_bit(ECORE_RSS_IPV4_TCP, ¶ms.rss_flags);
|
|
bnx2x_set_bit(ECORE_RSS_IPV6, ¶ms.rss_flags);
|
|
bnx2x_set_bit(ECORE_RSS_IPV6_TCP, ¶ms.rss_flags);
|
|
if (rss_obj->udp_rss_v4) {
|
|
bnx2x_set_bit(ECORE_RSS_IPV4_UDP, ¶ms.rss_flags);
|
|
}
|
|
if (rss_obj->udp_rss_v6) {
|
|
bnx2x_set_bit(ECORE_RSS_IPV6_UDP, ¶ms.rss_flags);
|
|
}
|
|
|
|
/* Hash bits */
|
|
params.rss_result_mask = MULTI_MASK;
|
|
|
|
(void)rte_memcpy(params.ind_table, rss_obj->ind_table,
|
|
sizeof(params.ind_table));
|
|
|
|
if (config_hash) {
|
|
/* RSS keys */
|
|
for (i = 0; i < sizeof(params.rss_key) / 4; i++) {
|
|
params.rss_key[i] = (uint32_t) rte_rand();
|
|
}
|
|
|
|
bnx2x_set_bit(ECORE_RSS_SET_SRCH, ¶ms.rss_flags);
|
|
}
|
|
|
|
if (IS_PF(sc))
|
|
return ecore_config_rss(sc, ¶ms);
|
|
else
|
|
return bnx2x_vf_config_rss(sc, ¶ms);
|
|
}
|
|
|
|
static int bnx2x_config_rss_eth(struct bnx2x_softc *sc, uint8_t config_hash)
|
|
{
|
|
return bnx2x_config_rss_pf(sc, &sc->rss_conf_obj, config_hash);
|
|
}
|
|
|
|
static int bnx2x_init_rss_pf(struct bnx2x_softc *sc)
|
|
{
|
|
uint8_t num_eth_queues = BNX2X_NUM_ETH_QUEUES(sc);
|
|
uint32_t i;
|
|
|
|
/*
|
|
* Prepare the initial contents of the indirection table if
|
|
* RSS is enabled
|
|
*/
|
|
for (i = 0; i < sizeof(sc->rss_conf_obj.ind_table); i++) {
|
|
sc->rss_conf_obj.ind_table[i] =
|
|
(sc->fp->cl_id + (i % num_eth_queues));
|
|
}
|
|
|
|
if (sc->udp_rss) {
|
|
sc->rss_conf_obj.udp_rss_v4 = sc->rss_conf_obj.udp_rss_v6 = 1;
|
|
}
|
|
|
|
/*
|
|
* For 57711 SEARCHER configuration (rss_keys) is
|
|
* per-port, so if explicit configuration is needed, do it only
|
|
* for a PMF.
|
|
*
|
|
* For 57712 and newer it's a per-function configuration.
|
|
*/
|
|
return bnx2x_config_rss_eth(sc, sc->port.pmf || !CHIP_IS_E1x(sc));
|
|
}
|
|
|
|
static int
|
|
bnx2x_set_mac_one(struct bnx2x_softc *sc, uint8_t * mac,
|
|
struct ecore_vlan_mac_obj *obj, uint8_t set, int mac_type,
|
|
unsigned long *ramrod_flags)
|
|
{
|
|
struct ecore_vlan_mac_ramrod_params ramrod_param;
|
|
int rc;
|
|
|
|
memset(&ramrod_param, 0, sizeof(ramrod_param));
|
|
|
|
/* fill in general parameters */
|
|
ramrod_param.vlan_mac_obj = obj;
|
|
ramrod_param.ramrod_flags = *ramrod_flags;
|
|
|
|
/* fill a user request section if needed */
|
|
if (!bnx2x_test_bit(RAMROD_CONT, ramrod_flags)) {
|
|
(void)rte_memcpy(ramrod_param.user_req.u.mac.mac, mac,
|
|
ETH_ALEN);
|
|
|
|
bnx2x_set_bit(mac_type, &ramrod_param.user_req.vlan_mac_flags);
|
|
|
|
/* Set the command: ADD or DEL */
|
|
ramrod_param.user_req.cmd = (set) ? ECORE_VLAN_MAC_ADD :
|
|
ECORE_VLAN_MAC_DEL;
|
|
}
|
|
|
|
rc = ecore_config_vlan_mac(sc, &ramrod_param);
|
|
|
|
if (rc == ECORE_EXISTS) {
|
|
PMD_DRV_LOG(INFO, "Failed to schedule ADD operations (EEXIST)");
|
|
/* do not treat adding same MAC as error */
|
|
rc = 0;
|
|
} else if (rc < 0) {
|
|
PMD_DRV_LOG(ERR,
|
|
"%s MAC failed (%d)", (set ? "Set" : "Delete"), rc);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int bnx2x_set_eth_mac(struct bnx2x_softc *sc, uint8_t set)
|
|
{
|
|
unsigned long ramrod_flags = 0;
|
|
|
|
PMD_DRV_LOG(DEBUG, "Adding Ethernet MAC");
|
|
|
|
bnx2x_set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
|
|
|
|
/* Eth MAC is set on RSS leading client (fp[0]) */
|
|
return bnx2x_set_mac_one(sc, sc->link_params.mac_addr,
|
|
&sc->sp_objs->mac_obj,
|
|
set, ECORE_ETH_MAC, &ramrod_flags);
|
|
}
|
|
|
|
static int bnx2x_get_cur_phy_idx(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t sel_phy_idx = 0;
|
|
|
|
if (sc->link_params.num_phys <= 1) {
|
|
return ELINK_INT_PHY;
|
|
}
|
|
|
|
if (sc->link_vars.link_up) {
|
|
sel_phy_idx = ELINK_EXT_PHY1;
|
|
/* In case link is SERDES, check if the ELINK_EXT_PHY2 is the one */
|
|
if ((sc->link_vars.link_status & LINK_STATUS_SERDES_LINK) &&
|
|
(sc->link_params.phy[ELINK_EXT_PHY2].supported &
|
|
ELINK_SUPPORTED_FIBRE))
|
|
sel_phy_idx = ELINK_EXT_PHY2;
|
|
} else {
|
|
switch (elink_phy_selection(&sc->link_params)) {
|
|
case PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT:
|
|
case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY:
|
|
case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY:
|
|
sel_phy_idx = ELINK_EXT_PHY1;
|
|
break;
|
|
case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY:
|
|
case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY:
|
|
sel_phy_idx = ELINK_EXT_PHY2;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return sel_phy_idx;
|
|
}
|
|
|
|
static int bnx2x_get_link_cfg_idx(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t sel_phy_idx = bnx2x_get_cur_phy_idx(sc);
|
|
|
|
/*
|
|
* The selected activated PHY is always after swapping (in case PHY
|
|
* swapping is enabled). So when swapping is enabled, we need to reverse
|
|
* the configuration
|
|
*/
|
|
|
|
if (sc->link_params.multi_phy_config & PORT_HW_CFG_PHY_SWAPPED_ENABLED) {
|
|
if (sel_phy_idx == ELINK_EXT_PHY1)
|
|
sel_phy_idx = ELINK_EXT_PHY2;
|
|
else if (sel_phy_idx == ELINK_EXT_PHY2)
|
|
sel_phy_idx = ELINK_EXT_PHY1;
|
|
}
|
|
|
|
return ELINK_LINK_CONFIG_IDX(sel_phy_idx);
|
|
}
|
|
|
|
static void bnx2x_set_requested_fc(struct bnx2x_softc *sc)
|
|
{
|
|
/*
|
|
* Initialize link parameters structure variables
|
|
* It is recommended to turn off RX FC for jumbo frames
|
|
* for better performance
|
|
*/
|
|
if (CHIP_IS_E1x(sc) && (sc->mtu > 5000)) {
|
|
sc->link_params.req_fc_auto_adv = ELINK_FLOW_CTRL_TX;
|
|
} else {
|
|
sc->link_params.req_fc_auto_adv = ELINK_FLOW_CTRL_BOTH;
|
|
}
|
|
}
|
|
|
|
static void bnx2x_calc_fc_adv(struct bnx2x_softc *sc)
|
|
{
|
|
uint8_t cfg_idx = bnx2x_get_link_cfg_idx(sc);
|
|
switch (sc->link_vars.ieee_fc &
|
|
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK) {
|
|
case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE:
|
|
default:
|
|
sc->port.advertising[cfg_idx] &= ~(ADVERTISED_Asym_Pause |
|
|
ADVERTISED_Pause);
|
|
break;
|
|
|
|
case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH:
|
|
sc->port.advertising[cfg_idx] |= (ADVERTISED_Asym_Pause |
|
|
ADVERTISED_Pause);
|
|
break;
|
|
|
|
case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC:
|
|
sc->port.advertising[cfg_idx] |= ADVERTISED_Asym_Pause;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static uint16_t bnx2x_get_mf_speed(struct bnx2x_softc *sc)
|
|
{
|
|
uint16_t line_speed = sc->link_vars.line_speed;
|
|
if (IS_MF(sc)) {
|
|
uint16_t maxCfg = bnx2x_extract_max_cfg(sc,
|
|
sc->devinfo.
|
|
mf_info.mf_config[SC_VN
|
|
(sc)]);
|
|
|
|
/* calculate the current MAX line speed limit for the MF devices */
|
|
if (IS_MF_SI(sc)) {
|
|
line_speed = (line_speed * maxCfg) / 100;
|
|
} else { /* SD mode */
|
|
uint16_t vn_max_rate = maxCfg * 100;
|
|
|
|
if (vn_max_rate < line_speed) {
|
|
line_speed = vn_max_rate;
|
|
}
|
|
}
|
|
}
|
|
|
|
return line_speed;
|
|
}
|
|
|
|
static void
|
|
bnx2x_fill_report_data(struct bnx2x_softc *sc, struct bnx2x_link_report_data *data)
|
|
{
|
|
uint16_t line_speed = bnx2x_get_mf_speed(sc);
|
|
|
|
memset(data, 0, sizeof(*data));
|
|
|
|
/* fill the report data with the effective line speed */
|
|
data->line_speed = line_speed;
|
|
|
|
/* Link is down */
|
|
if (!sc->link_vars.link_up || (sc->flags & BNX2X_MF_FUNC_DIS)) {
|
|
bnx2x_set_bit(BNX2X_LINK_REPORT_LINK_DOWN,
|
|
&data->link_report_flags);
|
|
}
|
|
|
|
/* Full DUPLEX */
|
|
if (sc->link_vars.duplex == DUPLEX_FULL) {
|
|
bnx2x_set_bit(BNX2X_LINK_REPORT_FULL_DUPLEX,
|
|
&data->link_report_flags);
|
|
}
|
|
|
|
/* Rx Flow Control is ON */
|
|
if (sc->link_vars.flow_ctrl & ELINK_FLOW_CTRL_RX) {
|
|
bnx2x_set_bit(BNX2X_LINK_REPORT_RX_FC_ON, &data->link_report_flags);
|
|
}
|
|
|
|
/* Tx Flow Control is ON */
|
|
if (sc->link_vars.flow_ctrl & ELINK_FLOW_CTRL_TX) {
|
|
bnx2x_set_bit(BNX2X_LINK_REPORT_TX_FC_ON, &data->link_report_flags);
|
|
}
|
|
}
|
|
|
|
/* report link status to OS, should be called under phy_lock */
|
|
static void bnx2x_link_report(struct bnx2x_softc *sc)
|
|
{
|
|
struct bnx2x_link_report_data cur_data;
|
|
|
|
/* reread mf_cfg */
|
|
if (IS_PF(sc)) {
|
|
bnx2x_read_mf_cfg(sc);
|
|
}
|
|
|
|
/* Read the current link report info */
|
|
bnx2x_fill_report_data(sc, &cur_data);
|
|
|
|
/* Don't report link down or exactly the same link status twice */
|
|
if (!memcmp(&cur_data, &sc->last_reported_link, sizeof(cur_data)) ||
|
|
(bnx2x_test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
|
|
&sc->last_reported_link.link_report_flags) &&
|
|
bnx2x_test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
|
|
&cur_data.link_report_flags))) {
|
|
return;
|
|
}
|
|
|
|
sc->link_cnt++;
|
|
|
|
/* report new link params and remember the state for the next time */
|
|
(void)rte_memcpy(&sc->last_reported_link, &cur_data, sizeof(cur_data));
|
|
|
|
if (bnx2x_test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
|
|
&cur_data.link_report_flags)) {
|
|
PMD_DRV_LOG(INFO, "NIC Link is Down");
|
|
} else {
|
|
__rte_unused const char *duplex;
|
|
__rte_unused const char *flow;
|
|
|
|
if (bnx2x_test_and_clear_bit(BNX2X_LINK_REPORT_FULL_DUPLEX,
|
|
&cur_data.link_report_flags)) {
|
|
duplex = "full";
|
|
} else {
|
|
duplex = "half";
|
|
}
|
|
|
|
/*
|
|
* Handle the FC at the end so that only these flags would be
|
|
* possibly set. This way we may easily check if there is no FC
|
|
* enabled.
|
|
*/
|
|
if (cur_data.link_report_flags) {
|
|
if (bnx2x_test_bit(BNX2X_LINK_REPORT_RX_FC_ON,
|
|
&cur_data.link_report_flags) &&
|
|
bnx2x_test_bit(BNX2X_LINK_REPORT_TX_FC_ON,
|
|
&cur_data.link_report_flags)) {
|
|
flow = "ON - receive & transmit";
|
|
} else if (bnx2x_test_bit(BNX2X_LINK_REPORT_RX_FC_ON,
|
|
&cur_data.link_report_flags) &&
|
|
!bnx2x_test_bit(BNX2X_LINK_REPORT_TX_FC_ON,
|
|
&cur_data.link_report_flags)) {
|
|
flow = "ON - receive";
|
|
} else if (!bnx2x_test_bit(BNX2X_LINK_REPORT_RX_FC_ON,
|
|
&cur_data.link_report_flags) &&
|
|
bnx2x_test_bit(BNX2X_LINK_REPORT_TX_FC_ON,
|
|
&cur_data.link_report_flags)) {
|
|
flow = "ON - transmit";
|
|
} else {
|
|
flow = "none"; /* possible? */
|
|
}
|
|
} else {
|
|
flow = "none";
|
|
}
|
|
|
|
PMD_DRV_LOG(INFO,
|
|
"NIC Link is Up, %d Mbps %s duplex, Flow control: %s",
|
|
cur_data.line_speed, duplex, flow);
|
|
}
|
|
}
|
|
|
|
void bnx2x_link_status_update(struct bnx2x_softc *sc)
|
|
{
|
|
if (sc->state != BNX2X_STATE_OPEN) {
|
|
return;
|
|
}
|
|
|
|
if (IS_PF(sc) && !CHIP_REV_IS_SLOW(sc)) {
|
|
elink_link_status_update(&sc->link_params, &sc->link_vars);
|
|
} else {
|
|
sc->port.supported[0] |= (ELINK_SUPPORTED_10baseT_Half |
|
|
ELINK_SUPPORTED_10baseT_Full |
|
|
ELINK_SUPPORTED_100baseT_Half |
|
|
ELINK_SUPPORTED_100baseT_Full |
|
|
ELINK_SUPPORTED_1000baseT_Full |
|
|
ELINK_SUPPORTED_2500baseX_Full |
|
|
ELINK_SUPPORTED_10000baseT_Full |
|
|
ELINK_SUPPORTED_TP |
|
|
ELINK_SUPPORTED_FIBRE |
|
|
ELINK_SUPPORTED_Autoneg |
|
|
ELINK_SUPPORTED_Pause |
|
|
ELINK_SUPPORTED_Asym_Pause);
|
|
sc->port.advertising[0] = sc->port.supported[0];
|
|
|
|
sc->link_params.sc = sc;
|
|
sc->link_params.port = SC_PORT(sc);
|
|
sc->link_params.req_duplex[0] = DUPLEX_FULL;
|
|
sc->link_params.req_flow_ctrl[0] = ELINK_FLOW_CTRL_NONE;
|
|
sc->link_params.req_line_speed[0] = SPEED_10000;
|
|
sc->link_params.speed_cap_mask[0] = 0x7f0000;
|
|
sc->link_params.switch_cfg = ELINK_SWITCH_CFG_10G;
|
|
|
|
if (CHIP_REV_IS_FPGA(sc)) {
|
|
sc->link_vars.mac_type = ELINK_MAC_TYPE_EMAC;
|
|
sc->link_vars.line_speed = ELINK_SPEED_1000;
|
|
sc->link_vars.link_status = (LINK_STATUS_LINK_UP |
|
|
LINK_STATUS_SPEED_AND_DUPLEX_1000TFD);
|
|
} else {
|
|
sc->link_vars.mac_type = ELINK_MAC_TYPE_BMAC;
|
|
sc->link_vars.line_speed = ELINK_SPEED_10000;
|
|
sc->link_vars.link_status = (LINK_STATUS_LINK_UP |
|
|
LINK_STATUS_SPEED_AND_DUPLEX_10GTFD);
|
|
}
|
|
|
|
sc->link_vars.link_up = 1;
|
|
|
|
sc->link_vars.duplex = DUPLEX_FULL;
|
|
sc->link_vars.flow_ctrl = ELINK_FLOW_CTRL_NONE;
|
|
|
|
if (IS_PF(sc)) {
|
|
REG_WR(sc,
|
|
NIG_REG_EGRESS_DRAIN0_MODE +
|
|
sc->link_params.port * 4, 0);
|
|
bnx2x_stats_handle(sc, STATS_EVENT_LINK_UP);
|
|
bnx2x_link_report(sc);
|
|
}
|
|
}
|
|
|
|
if (IS_PF(sc)) {
|
|
if (sc->link_vars.link_up) {
|
|
bnx2x_stats_handle(sc, STATS_EVENT_LINK_UP);
|
|
} else {
|
|
bnx2x_stats_handle(sc, STATS_EVENT_STOP);
|
|
}
|
|
bnx2x_link_report(sc);
|
|
} else {
|
|
bnx2x_link_report(sc);
|
|
bnx2x_stats_handle(sc, STATS_EVENT_LINK_UP);
|
|
}
|
|
}
|
|
|
|
static void bnx2x_periodic_start(struct bnx2x_softc *sc)
|
|
{
|
|
atomic_store_rel_long(&sc->periodic_flags, PERIODIC_GO);
|
|
}
|
|
|
|
static void bnx2x_periodic_stop(struct bnx2x_softc *sc)
|
|
{
|
|
atomic_store_rel_long(&sc->periodic_flags, PERIODIC_STOP);
|
|
}
|
|
|
|
static int bnx2x_initial_phy_init(struct bnx2x_softc *sc, int load_mode)
|
|
{
|
|
int rc, cfg_idx = bnx2x_get_link_cfg_idx(sc);
|
|
uint16_t req_line_speed = sc->link_params.req_line_speed[cfg_idx];
|
|
struct elink_params *lp = &sc->link_params;
|
|
|
|
bnx2x_set_requested_fc(sc);
|
|
|
|
if (load_mode == LOAD_DIAG) {
|
|
lp->loopback_mode = ELINK_LOOPBACK_XGXS;
|
|
/* Prefer doing PHY loopback at 10G speed, if possible */
|
|
if (lp->req_line_speed[cfg_idx] < ELINK_SPEED_10000) {
|
|
if (lp->speed_cap_mask[cfg_idx] &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) {
|
|
lp->req_line_speed[cfg_idx] = ELINK_SPEED_10000;
|
|
} else {
|
|
lp->req_line_speed[cfg_idx] = ELINK_SPEED_1000;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (load_mode == LOAD_LOOPBACK_EXT) {
|
|
lp->loopback_mode = ELINK_LOOPBACK_EXT;
|
|
}
|
|
|
|
rc = elink_phy_init(&sc->link_params, &sc->link_vars);
|
|
|
|
bnx2x_calc_fc_adv(sc);
|
|
|
|
if (sc->link_vars.link_up) {
|
|
bnx2x_stats_handle(sc, STATS_EVENT_LINK_UP);
|
|
bnx2x_link_report(sc);
|
|
}
|
|
|
|
if (!CHIP_REV_IS_SLOW(sc)) {
|
|
bnx2x_periodic_start(sc);
|
|
}
|
|
|
|
sc->link_params.req_line_speed[cfg_idx] = req_line_speed;
|
|
return rc;
|
|
}
|
|
|
|
/* update flags in shmem */
|
|
static void
|
|
bnx2x_update_drv_flags(struct bnx2x_softc *sc, uint32_t flags, uint32_t set)
|
|
{
|
|
uint32_t drv_flags;
|
|
|
|
if (SHMEM2_HAS(sc, drv_flags)) {
|
|
bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_DRV_FLAGS);
|
|
drv_flags = SHMEM2_RD(sc, drv_flags);
|
|
|
|
if (set) {
|
|
drv_flags |= flags;
|
|
} else {
|
|
drv_flags &= ~flags;
|
|
}
|
|
|
|
SHMEM2_WR(sc, drv_flags, drv_flags);
|
|
|
|
bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_DRV_FLAGS);
|
|
}
|
|
}
|
|
|
|
/* periodic timer callout routine, only runs when the interface is up */
|
|
void bnx2x_periodic_callout(struct bnx2x_softc *sc)
|
|
{
|
|
if ((sc->state != BNX2X_STATE_OPEN) ||
|
|
(atomic_load_acq_long(&sc->periodic_flags) == PERIODIC_STOP)) {
|
|
PMD_DRV_LOG(WARNING, "periodic callout exit (state=0x%x)",
|
|
sc->state);
|
|
return;
|
|
}
|
|
if (!CHIP_REV_IS_SLOW(sc)) {
|
|
/*
|
|
* This barrier is needed to ensure the ordering between the writing
|
|
* to the sc->port.pmf in the bnx2x_nic_load() or bnx2x_pmf_update() and
|
|
* the reading here.
|
|
*/
|
|
mb();
|
|
if (sc->port.pmf) {
|
|
elink_period_func(&sc->link_params, &sc->link_vars);
|
|
}
|
|
}
|
|
#ifdef BNX2X_PULSE
|
|
if (IS_PF(sc) && !BNX2X_NOMCP(sc)) {
|
|
int mb_idx = SC_FW_MB_IDX(sc);
|
|
uint32_t drv_pulse;
|
|
uint32_t mcp_pulse;
|
|
|
|
++sc->fw_drv_pulse_wr_seq;
|
|
sc->fw_drv_pulse_wr_seq &= DRV_PULSE_SEQ_MASK;
|
|
|
|
drv_pulse = sc->fw_drv_pulse_wr_seq;
|
|
bnx2x_drv_pulse(sc);
|
|
|
|
mcp_pulse = (SHMEM_RD(sc, func_mb[mb_idx].mcp_pulse_mb) &
|
|
MCP_PULSE_SEQ_MASK);
|
|
|
|
/*
|
|
* The delta between driver pulse and mcp response should
|
|
* be 1 (before mcp response) or 0 (after mcp response).
|
|
*/
|
|
if ((drv_pulse != mcp_pulse) &&
|
|
(drv_pulse != ((mcp_pulse + 1) & MCP_PULSE_SEQ_MASK))) {
|
|
/* someone lost a heartbeat... */
|
|
PMD_DRV_LOG(ERR,
|
|
"drv_pulse (0x%x) != mcp_pulse (0x%x)",
|
|
drv_pulse, mcp_pulse);
|
|
}
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/* start the controller */
|
|
static __attribute__ ((noinline))
|
|
int bnx2x_nic_load(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
uint32_t load_code = 0;
|
|
int i, rc = 0;
|
|
|
|
PMD_INIT_FUNC_TRACE();
|
|
|
|
sc->state = BNX2X_STATE_OPENING_WAITING_LOAD;
|
|
|
|
if (IS_PF(sc)) {
|
|
/* must be called before memory allocation and HW init */
|
|
bnx2x_ilt_set_info(sc);
|
|
}
|
|
|
|
bnx2x_set_fp_rx_buf_size(sc);
|
|
|
|
if (IS_PF(sc)) {
|
|
if (bnx2x_alloc_mem(sc) != 0) {
|
|
sc->state = BNX2X_STATE_CLOSED;
|
|
rc = -ENOMEM;
|
|
goto bnx2x_nic_load_error0;
|
|
}
|
|
}
|
|
|
|
if (bnx2x_alloc_fw_stats_mem(sc) != 0) {
|
|
sc->state = BNX2X_STATE_CLOSED;
|
|
rc = -ENOMEM;
|
|
goto bnx2x_nic_load_error0;
|
|
}
|
|
|
|
if (IS_VF(sc)) {
|
|
rc = bnx2x_vf_init(sc);
|
|
if (rc) {
|
|
sc->state = BNX2X_STATE_ERROR;
|
|
goto bnx2x_nic_load_error0;
|
|
}
|
|
}
|
|
|
|
if (IS_PF(sc)) {
|
|
/* set pf load just before approaching the MCP */
|
|
bnx2x_set_pf_load(sc);
|
|
|
|
/* if MCP exists send load request and analyze response */
|
|
if (!BNX2X_NOMCP(sc)) {
|
|
/* attempt to load pf */
|
|
if (bnx2x_nic_load_request(sc, &load_code) != 0) {
|
|
sc->state = BNX2X_STATE_CLOSED;
|
|
rc = -ENXIO;
|
|
goto bnx2x_nic_load_error1;
|
|
}
|
|
|
|
/* what did the MCP say? */
|
|
if (bnx2x_nic_load_analyze_req(sc, load_code) != 0) {
|
|
bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_DONE, 0);
|
|
sc->state = BNX2X_STATE_CLOSED;
|
|
rc = -ENXIO;
|
|
goto bnx2x_nic_load_error2;
|
|
}
|
|
} else {
|
|
PMD_DRV_LOG(INFO, "Device has no MCP!");
|
|
load_code = bnx2x_nic_load_no_mcp(sc);
|
|
}
|
|
|
|
/* mark PMF if applicable */
|
|
bnx2x_nic_load_pmf(sc, load_code);
|
|
|
|
/* Init Function state controlling object */
|
|
bnx2x_init_func_obj(sc);
|
|
|
|
/* Initialize HW */
|
|
if (bnx2x_init_hw(sc, load_code) != 0) {
|
|
PMD_DRV_LOG(NOTICE, "HW init failed");
|
|
bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_DONE, 0);
|
|
sc->state = BNX2X_STATE_CLOSED;
|
|
rc = -ENXIO;
|
|
goto bnx2x_nic_load_error2;
|
|
}
|
|
}
|
|
|
|
bnx2x_nic_init(sc, load_code);
|
|
|
|
/* Init per-function objects */
|
|
if (IS_PF(sc)) {
|
|
bnx2x_init_objs(sc);
|
|
|
|
/* set AFEX default VLAN tag to an invalid value */
|
|
sc->devinfo.mf_info.afex_def_vlan_tag = -1;
|
|
|
|
sc->state = BNX2X_STATE_OPENING_WAITING_PORT;
|
|
rc = bnx2x_func_start(sc);
|
|
if (rc) {
|
|
PMD_DRV_LOG(NOTICE, "Function start failed!");
|
|
bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_DONE, 0);
|
|
sc->state = BNX2X_STATE_ERROR;
|
|
goto bnx2x_nic_load_error3;
|
|
}
|
|
|
|
/* send LOAD_DONE command to MCP */
|
|
if (!BNX2X_NOMCP(sc)) {
|
|
load_code =
|
|
bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_DONE, 0);
|
|
if (!load_code) {
|
|
PMD_DRV_LOG(NOTICE,
|
|
"MCP response failure, aborting");
|
|
sc->state = BNX2X_STATE_ERROR;
|
|
rc = -ENXIO;
|
|
goto bnx2x_nic_load_error3;
|
|
}
|
|
}
|
|
}
|
|
|
|
rc = bnx2x_setup_leading(sc);
|
|
if (rc) {
|
|
PMD_DRV_LOG(NOTICE, "Setup leading failed!");
|
|
sc->state = BNX2X_STATE_ERROR;
|
|
goto bnx2x_nic_load_error3;
|
|
}
|
|
|
|
FOR_EACH_NONDEFAULT_ETH_QUEUE(sc, i) {
|
|
if (IS_PF(sc))
|
|
rc = bnx2x_setup_queue(sc, &sc->fp[i], FALSE);
|
|
else /* IS_VF(sc) */
|
|
rc = bnx2x_vf_setup_queue(sc, &sc->fp[i], FALSE);
|
|
|
|
if (rc) {
|
|
PMD_DRV_LOG(NOTICE, "Queue(%d) setup failed", i);
|
|
sc->state = BNX2X_STATE_ERROR;
|
|
goto bnx2x_nic_load_error3;
|
|
}
|
|
}
|
|
|
|
rc = bnx2x_init_rss_pf(sc);
|
|
if (rc) {
|
|
PMD_DRV_LOG(NOTICE, "PF RSS init failed");
|
|
sc->state = BNX2X_STATE_ERROR;
|
|
goto bnx2x_nic_load_error3;
|
|
}
|
|
|
|
/* now when Clients are configured we are ready to work */
|
|
sc->state = BNX2X_STATE_OPEN;
|
|
|
|
/* Configure a ucast MAC */
|
|
if (IS_PF(sc)) {
|
|
rc = bnx2x_set_eth_mac(sc, TRUE);
|
|
} else { /* IS_VF(sc) */
|
|
rc = bnx2x_vf_set_mac(sc, TRUE);
|
|
}
|
|
|
|
if (rc) {
|
|
PMD_DRV_LOG(NOTICE, "Setting Ethernet MAC failed");
|
|
sc->state = BNX2X_STATE_ERROR;
|
|
goto bnx2x_nic_load_error3;
|
|
}
|
|
|
|
if (sc->port.pmf) {
|
|
rc = bnx2x_initial_phy_init(sc, LOAD_OPEN);
|
|
if (rc) {
|
|
sc->state = BNX2X_STATE_ERROR;
|
|
goto bnx2x_nic_load_error3;
|
|
}
|
|
}
|
|
|
|
sc->link_params.feature_config_flags &=
|
|
~ELINK_FEATURE_CONFIG_BOOT_FROM_SAN;
|
|
|
|
/* start the Tx */
|
|
switch (LOAD_OPEN) {
|
|
case LOAD_NORMAL:
|
|
case LOAD_OPEN:
|
|
break;
|
|
|
|
case LOAD_DIAG:
|
|
case LOAD_LOOPBACK_EXT:
|
|
sc->state = BNX2X_STATE_DIAG;
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (sc->port.pmf) {
|
|
bnx2x_update_drv_flags(sc, 1 << DRV_FLAGS_PORT_MASK, 0);
|
|
} else {
|
|
bnx2x_link_status_update(sc);
|
|
}
|
|
|
|
if (IS_PF(sc) && SHMEM2_HAS(sc, drv_capabilities_flag)) {
|
|
/* mark driver is loaded in shmem2 */
|
|
val = SHMEM2_RD(sc, drv_capabilities_flag[SC_FW_MB_IDX(sc)]);
|
|
SHMEM2_WR(sc, drv_capabilities_flag[SC_FW_MB_IDX(sc)],
|
|
(val |
|
|
DRV_FLAGS_CAPABILITIES_LOADED_SUPPORTED |
|
|
DRV_FLAGS_CAPABILITIES_LOADED_L2));
|
|
}
|
|
|
|
/* start fast path */
|
|
/* Initialize Rx filter */
|
|
bnx2x_set_rx_mode(sc);
|
|
|
|
/* wait for all pending SP commands to complete */
|
|
if (IS_PF(sc) && !bnx2x_wait_sp_comp(sc, ~0x0UL)) {
|
|
PMD_DRV_LOG(NOTICE, "Timeout waiting for all SPs to complete!");
|
|
bnx2x_periodic_stop(sc);
|
|
bnx2x_nic_unload(sc, UNLOAD_CLOSE, FALSE);
|
|
return -ENXIO;
|
|
}
|
|
|
|
PMD_DRV_LOG(DEBUG, "NIC successfully loaded");
|
|
|
|
return 0;
|
|
|
|
bnx2x_nic_load_error3:
|
|
|
|
if (IS_PF(sc)) {
|
|
bnx2x_int_disable_sync(sc, 1);
|
|
|
|
/* clean out queued objects */
|
|
bnx2x_squeeze_objects(sc);
|
|
}
|
|
|
|
bnx2x_nic_load_error2:
|
|
|
|
if (IS_PF(sc) && !BNX2X_NOMCP(sc)) {
|
|
bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP, 0);
|
|
bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_DONE, 0);
|
|
}
|
|
|
|
sc->port.pmf = 0;
|
|
|
|
bnx2x_nic_load_error1:
|
|
|
|
/* clear pf_load status, as it was already set */
|
|
if (IS_PF(sc)) {
|
|
bnx2x_clear_pf_load(sc);
|
|
}
|
|
|
|
bnx2x_nic_load_error0:
|
|
|
|
bnx2x_free_fw_stats_mem(sc);
|
|
bnx2x_free_mem(sc);
|
|
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* Handles controller initialization.
|
|
*/
|
|
int bnx2x_init(struct bnx2x_softc *sc)
|
|
{
|
|
int other_engine = SC_PATH(sc) ? 0 : 1;
|
|
uint8_t other_load_status, load_status;
|
|
uint8_t global = FALSE;
|
|
int rc;
|
|
|
|
/* Check if the driver is still running and bail out if it is. */
|
|
if (sc->state != BNX2X_STATE_CLOSED) {
|
|
PMD_DRV_LOG(DEBUG, "Init called while driver is running!");
|
|
rc = 0;
|
|
goto bnx2x_init_done;
|
|
}
|
|
|
|
bnx2x_set_power_state(sc, PCI_PM_D0);
|
|
|
|
/*
|
|
* If parity occurred during the unload, then attentions and/or
|
|
* RECOVERY_IN_PROGRESS may still be set. If so we want the first function
|
|
* loaded on the current engine to complete the recovery. Parity recovery
|
|
* is only relevant for PF driver.
|
|
*/
|
|
if (IS_PF(sc)) {
|
|
other_load_status = bnx2x_get_load_status(sc, other_engine);
|
|
load_status = bnx2x_get_load_status(sc, SC_PATH(sc));
|
|
|
|
if (!bnx2x_reset_is_done(sc, SC_PATH(sc)) ||
|
|
bnx2x_chk_parity_attn(sc, &global, TRUE)) {
|
|
do {
|
|
/*
|
|
* If there are attentions and they are in global blocks, set
|
|
* the GLOBAL_RESET bit regardless whether it will be this
|
|
* function that will complete the recovery or not.
|
|
*/
|
|
if (global) {
|
|
bnx2x_set_reset_global(sc);
|
|
}
|
|
|
|
/*
|
|
* Only the first function on the current engine should try
|
|
* to recover in open. In case of attentions in global blocks
|
|
* only the first in the chip should try to recover.
|
|
*/
|
|
if ((!load_status
|
|
&& (!global ||!other_load_status))
|
|
&& bnx2x_trylock_leader_lock(sc)
|
|
&& !bnx2x_leader_reset(sc)) {
|
|
PMD_DRV_LOG(INFO,
|
|
"Recovered during init");
|
|
break;
|
|
}
|
|
|
|
/* recovery has failed... */
|
|
bnx2x_set_power_state(sc, PCI_PM_D3hot);
|
|
|
|
sc->recovery_state = BNX2X_RECOVERY_FAILED;
|
|
|
|
PMD_DRV_LOG(NOTICE,
|
|
"Recovery flow hasn't properly "
|
|
"completed yet, try again later. "
|
|
"If you still see this message after a "
|
|
"few retries then power cycle is required.");
|
|
|
|
rc = -ENXIO;
|
|
goto bnx2x_init_done;
|
|
} while (0);
|
|
}
|
|
}
|
|
|
|
sc->recovery_state = BNX2X_RECOVERY_DONE;
|
|
|
|
rc = bnx2x_nic_load(sc);
|
|
|
|
bnx2x_init_done:
|
|
|
|
if (rc) {
|
|
PMD_DRV_LOG(NOTICE, "Initialization failed, "
|
|
"stack notified driver is NOT running!");
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void bnx2x_get_function_num(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t val = 0;
|
|
|
|
/*
|
|
* Read the ME register to get the function number. The ME register
|
|
* holds the relative-function number and absolute-function number. The
|
|
* absolute-function number appears only in E2 and above. Before that
|
|
* these bits always contained zero, therefore we cannot blindly use them.
|
|
*/
|
|
|
|
val = REG_RD(sc, BAR_ME_REGISTER);
|
|
|
|
sc->pfunc_rel =
|
|
(uint8_t) ((val & ME_REG_PF_NUM) >> ME_REG_PF_NUM_SHIFT);
|
|
sc->path_id =
|
|
(uint8_t) ((val & ME_REG_ABS_PF_NUM) >> ME_REG_ABS_PF_NUM_SHIFT) &
|
|
1;
|
|
|
|
if (CHIP_PORT_MODE(sc) == CHIP_4_PORT_MODE) {
|
|
sc->pfunc_abs = ((sc->pfunc_rel << 1) | sc->path_id);
|
|
} else {
|
|
sc->pfunc_abs = (sc->pfunc_rel | sc->path_id);
|
|
}
|
|
|
|
PMD_DRV_LOG(DEBUG,
|
|
"Relative function %d, Absolute function %d, Path %d",
|
|
sc->pfunc_rel, sc->pfunc_abs, sc->path_id);
|
|
}
|
|
|
|
static uint32_t bnx2x_get_shmem_mf_cfg_base(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t shmem2_size;
|
|
uint32_t offset;
|
|
uint32_t mf_cfg_offset_value;
|
|
|
|
/* Non 57712 */
|
|
offset = (SHMEM_ADDR(sc, func_mb) +
|
|
(MAX_FUNC_NUM * sizeof(struct drv_func_mb)));
|
|
|
|
/* 57712 plus */
|
|
if (sc->devinfo.shmem2_base != 0) {
|
|
shmem2_size = SHMEM2_RD(sc, size);
|
|
if (shmem2_size > offsetof(struct shmem2_region, mf_cfg_addr)) {
|
|
mf_cfg_offset_value = SHMEM2_RD(sc, mf_cfg_addr);
|
|
if (SHMEM_MF_CFG_ADDR_NONE != mf_cfg_offset_value) {
|
|
offset = mf_cfg_offset_value;
|
|
}
|
|
}
|
|
}
|
|
|
|
return offset;
|
|
}
|
|
|
|
static uint32_t bnx2x_pcie_capability_read(struct bnx2x_softc *sc, int reg)
|
|
{
|
|
uint32_t ret;
|
|
struct bnx2x_pci_cap *caps;
|
|
|
|
/* ensure PCIe capability is enabled */
|
|
caps = pci_find_cap(sc, PCIY_EXPRESS, BNX2X_PCI_CAP);
|
|
if (NULL != caps) {
|
|
PMD_DRV_LOG(DEBUG, "Found PCIe capability: "
|
|
"id=0x%04X type=0x%04X addr=0x%08X",
|
|
caps->id, caps->type, caps->addr);
|
|
pci_read(sc, (caps->addr + reg), &ret, 2);
|
|
return ret;
|
|
}
|
|
|
|
PMD_DRV_LOG(WARNING, "PCIe capability NOT FOUND!!!");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static uint8_t bnx2x_is_pcie_pending(struct bnx2x_softc *sc)
|
|
{
|
|
return bnx2x_pcie_capability_read(sc, PCIR_EXPRESS_DEVICE_STA) &
|
|
PCIM_EXP_STA_TRANSACTION_PND;
|
|
}
|
|
|
|
/*
|
|
* Walk the PCI capabiites list for the device to find what features are
|
|
* supported. These capabilites may be enabled/disabled by firmware so it's
|
|
* best to walk the list rather than make assumptions.
|
|
*/
|
|
static void bnx2x_probe_pci_caps(struct bnx2x_softc *sc)
|
|
{
|
|
PMD_INIT_FUNC_TRACE();
|
|
|
|
struct bnx2x_pci_cap *caps;
|
|
uint16_t link_status;
|
|
#ifdef RTE_LIBRTE_BNX2X_DEBUG
|
|
int reg = 0;
|
|
#endif
|
|
|
|
/* check if PCI Power Management is enabled */
|
|
caps = pci_find_cap(sc, PCIY_PMG, BNX2X_PCI_CAP);
|
|
if (NULL != caps) {
|
|
PMD_DRV_LOG(DEBUG, "Found PM capability: "
|
|
"id=0x%04X type=0x%04X addr=0x%08X",
|
|
caps->id, caps->type, caps->addr);
|
|
|
|
sc->devinfo.pcie_cap_flags |= BNX2X_PM_CAPABLE_FLAG;
|
|
sc->devinfo.pcie_pm_cap_reg = caps->addr;
|
|
}
|
|
|
|
link_status = bnx2x_pcie_capability_read(sc, PCIR_EXPRESS_LINK_STA);
|
|
|
|
sc->devinfo.pcie_link_speed = (link_status & PCIM_LINK_STA_SPEED);
|
|
sc->devinfo.pcie_link_width =
|
|
((link_status & PCIM_LINK_STA_WIDTH) >> 4);
|
|
|
|
PMD_DRV_LOG(DEBUG, "PCIe link speed=%d width=%d",
|
|
sc->devinfo.pcie_link_speed, sc->devinfo.pcie_link_width);
|
|
|
|
sc->devinfo.pcie_cap_flags |= BNX2X_PCIE_CAPABLE_FLAG;
|
|
|
|
/* check if MSI capability is enabled */
|
|
caps = pci_find_cap(sc, PCIY_MSI, BNX2X_PCI_CAP);
|
|
if (NULL != caps) {
|
|
PMD_DRV_LOG(DEBUG, "Found MSI capability at 0x%04x", reg);
|
|
|
|
sc->devinfo.pcie_cap_flags |= BNX2X_MSI_CAPABLE_FLAG;
|
|
sc->devinfo.pcie_msi_cap_reg = caps->addr;
|
|
}
|
|
|
|
/* check if MSI-X capability is enabled */
|
|
caps = pci_find_cap(sc, PCIY_MSIX, BNX2X_PCI_CAP);
|
|
if (NULL != caps) {
|
|
PMD_DRV_LOG(DEBUG, "Found MSI-X capability at 0x%04x", reg);
|
|
|
|
sc->devinfo.pcie_cap_flags |= BNX2X_MSIX_CAPABLE_FLAG;
|
|
sc->devinfo.pcie_msix_cap_reg = caps->addr;
|
|
}
|
|
}
|
|
|
|
static int bnx2x_get_shmem_mf_cfg_info_sd(struct bnx2x_softc *sc)
|
|
{
|
|
struct bnx2x_mf_info *mf_info = &sc->devinfo.mf_info;
|
|
uint32_t val;
|
|
|
|
/* get the outer vlan if we're in switch-dependent mode */
|
|
|
|
val = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].e1hov_tag);
|
|
mf_info->ext_id = (uint16_t) val;
|
|
|
|
mf_info->multi_vnics_mode = 1;
|
|
|
|
if (!VALID_OVLAN(mf_info->ext_id)) {
|
|
PMD_DRV_LOG(NOTICE, "Invalid VLAN (%d)", mf_info->ext_id);
|
|
return 1;
|
|
}
|
|
|
|
/* get the capabilities */
|
|
if ((mf_info->mf_config[SC_VN(sc)] & FUNC_MF_CFG_PROTOCOL_MASK) ==
|
|
FUNC_MF_CFG_PROTOCOL_ISCSI) {
|
|
mf_info->mf_protos_supported |= MF_PROTO_SUPPORT_ISCSI;
|
|
} else if ((mf_info->mf_config[SC_VN(sc)] & FUNC_MF_CFG_PROTOCOL_MASK)
|
|
== FUNC_MF_CFG_PROTOCOL_FCOE) {
|
|
mf_info->mf_protos_supported |= MF_PROTO_SUPPORT_FCOE;
|
|
} else {
|
|
mf_info->mf_protos_supported |= MF_PROTO_SUPPORT_ETHERNET;
|
|
}
|
|
|
|
mf_info->vnics_per_port =
|
|
(CHIP_PORT_MODE(sc) == CHIP_4_PORT_MODE) ? 2 : 4;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static uint32_t bnx2x_get_shmem_ext_proto_support_flags(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t retval = 0;
|
|
uint32_t val;
|
|
|
|
val = MFCFG_RD(sc, func_ext_config[SC_ABS_FUNC(sc)].func_cfg);
|
|
|
|
if (val & MACP_FUNC_CFG_FLAGS_ENABLED) {
|
|
if (val & MACP_FUNC_CFG_FLAGS_ETHERNET) {
|
|
retval |= MF_PROTO_SUPPORT_ETHERNET;
|
|
}
|
|
if (val & MACP_FUNC_CFG_FLAGS_ISCSI_OFFLOAD) {
|
|
retval |= MF_PROTO_SUPPORT_ISCSI;
|
|
}
|
|
if (val & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD) {
|
|
retval |= MF_PROTO_SUPPORT_FCOE;
|
|
}
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int bnx2x_get_shmem_mf_cfg_info_si(struct bnx2x_softc *sc)
|
|
{
|
|
struct bnx2x_mf_info *mf_info = &sc->devinfo.mf_info;
|
|
uint32_t val;
|
|
|
|
/*
|
|
* There is no outer vlan if we're in switch-independent mode.
|
|
* If the mac is valid then assume multi-function.
|
|
*/
|
|
|
|
val = MFCFG_RD(sc, func_ext_config[SC_ABS_FUNC(sc)].func_cfg);
|
|
|
|
mf_info->multi_vnics_mode = ((val & MACP_FUNC_CFG_FLAGS_MASK) != 0);
|
|
|
|
mf_info->mf_protos_supported =
|
|
bnx2x_get_shmem_ext_proto_support_flags(sc);
|
|
|
|
mf_info->vnics_per_port =
|
|
(CHIP_PORT_MODE(sc) == CHIP_4_PORT_MODE) ? 2 : 4;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_get_shmem_mf_cfg_info_niv(struct bnx2x_softc *sc)
|
|
{
|
|
struct bnx2x_mf_info *mf_info = &sc->devinfo.mf_info;
|
|
uint32_t e1hov_tag;
|
|
uint32_t func_config;
|
|
uint32_t niv_config;
|
|
|
|
mf_info->multi_vnics_mode = 1;
|
|
|
|
e1hov_tag = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].e1hov_tag);
|
|
func_config = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].config);
|
|
niv_config = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].afex_config);
|
|
|
|
mf_info->ext_id =
|
|
(uint16_t) ((e1hov_tag & FUNC_MF_CFG_E1HOV_TAG_MASK) >>
|
|
FUNC_MF_CFG_E1HOV_TAG_SHIFT);
|
|
|
|
mf_info->default_vlan =
|
|
(uint16_t) ((e1hov_tag & FUNC_MF_CFG_AFEX_VLAN_MASK) >>
|
|
FUNC_MF_CFG_AFEX_VLAN_SHIFT);
|
|
|
|
mf_info->niv_allowed_priorities =
|
|
(uint8_t) ((niv_config & FUNC_MF_CFG_AFEX_COS_FILTER_MASK) >>
|
|
FUNC_MF_CFG_AFEX_COS_FILTER_SHIFT);
|
|
|
|
mf_info->niv_default_cos =
|
|
(uint8_t) ((func_config & FUNC_MF_CFG_TRANSMIT_PRIORITY_MASK) >>
|
|
FUNC_MF_CFG_TRANSMIT_PRIORITY_SHIFT);
|
|
|
|
mf_info->afex_vlan_mode =
|
|
((niv_config & FUNC_MF_CFG_AFEX_VLAN_MODE_MASK) >>
|
|
FUNC_MF_CFG_AFEX_VLAN_MODE_SHIFT);
|
|
|
|
mf_info->niv_mba_enabled =
|
|
((niv_config & FUNC_MF_CFG_AFEX_MBA_ENABLED_MASK) >>
|
|
FUNC_MF_CFG_AFEX_MBA_ENABLED_SHIFT);
|
|
|
|
mf_info->mf_protos_supported =
|
|
bnx2x_get_shmem_ext_proto_support_flags(sc);
|
|
|
|
mf_info->vnics_per_port =
|
|
(CHIP_PORT_MODE(sc) == CHIP_4_PORT_MODE) ? 2 : 4;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_check_valid_mf_cfg(struct bnx2x_softc *sc)
|
|
{
|
|
struct bnx2x_mf_info *mf_info = &sc->devinfo.mf_info;
|
|
uint32_t mf_cfg1;
|
|
uint32_t mf_cfg2;
|
|
uint32_t ovlan1;
|
|
uint32_t ovlan2;
|
|
uint8_t i, j;
|
|
|
|
/* various MF mode sanity checks... */
|
|
|
|
if (mf_info->mf_config[SC_VN(sc)] & FUNC_MF_CFG_FUNC_HIDE) {
|
|
PMD_DRV_LOG(NOTICE,
|
|
"Enumerated function %d is marked as hidden",
|
|
SC_PORT(sc));
|
|
return 1;
|
|
}
|
|
|
|
if ((mf_info->vnics_per_port > 1) && !mf_info->multi_vnics_mode) {
|
|
PMD_DRV_LOG(NOTICE, "vnics_per_port=%d multi_vnics_mode=%d",
|
|
mf_info->vnics_per_port, mf_info->multi_vnics_mode);
|
|
return 1;
|
|
}
|
|
|
|
if (mf_info->mf_mode == MULTI_FUNCTION_SD) {
|
|
/* vnic id > 0 must have valid ovlan in switch-dependent mode */
|
|
if ((SC_VN(sc) > 0) && !VALID_OVLAN(OVLAN(sc))) {
|
|
PMD_DRV_LOG(NOTICE, "mf_mode=SD vnic_id=%d ovlan=%d",
|
|
SC_VN(sc), OVLAN(sc));
|
|
return 1;
|
|
}
|
|
|
|
if (!VALID_OVLAN(OVLAN(sc)) && mf_info->multi_vnics_mode) {
|
|
PMD_DRV_LOG(NOTICE,
|
|
"mf_mode=SD multi_vnics_mode=%d ovlan=%d",
|
|
mf_info->multi_vnics_mode, OVLAN(sc));
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Verify all functions are either MF or SF mode. If MF, make sure
|
|
* sure that all non-hidden functions have a valid ovlan. If SF,
|
|
* make sure that all non-hidden functions have an invalid ovlan.
|
|
*/
|
|
FOREACH_ABS_FUNC_IN_PORT(sc, i) {
|
|
mf_cfg1 = MFCFG_RD(sc, func_mf_config[i].config);
|
|
ovlan1 = MFCFG_RD(sc, func_mf_config[i].e1hov_tag);
|
|
if (!(mf_cfg1 & FUNC_MF_CFG_FUNC_HIDE) &&
|
|
(((mf_info->multi_vnics_mode)
|
|
&& !VALID_OVLAN(ovlan1))
|
|
|| ((!mf_info->multi_vnics_mode)
|
|
&& VALID_OVLAN(ovlan1)))) {
|
|
PMD_DRV_LOG(NOTICE,
|
|
"mf_mode=SD function %d MF config "
|
|
"mismatch, multi_vnics_mode=%d ovlan=%d",
|
|
i, mf_info->multi_vnics_mode,
|
|
ovlan1);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
/* Verify all funcs on the same port each have a different ovlan. */
|
|
FOREACH_ABS_FUNC_IN_PORT(sc, i) {
|
|
mf_cfg1 = MFCFG_RD(sc, func_mf_config[i].config);
|
|
ovlan1 = MFCFG_RD(sc, func_mf_config[i].e1hov_tag);
|
|
/* iterate from the next function on the port to the max func */
|
|
for (j = i + 2; j < MAX_FUNC_NUM; j += 2) {
|
|
mf_cfg2 =
|
|
MFCFG_RD(sc, func_mf_config[j].config);
|
|
ovlan2 =
|
|
MFCFG_RD(sc, func_mf_config[j].e1hov_tag);
|
|
if (!(mf_cfg1 & FUNC_MF_CFG_FUNC_HIDE)
|
|
&& VALID_OVLAN(ovlan1)
|
|
&& !(mf_cfg2 & FUNC_MF_CFG_FUNC_HIDE)
|
|
&& VALID_OVLAN(ovlan2)
|
|
&& (ovlan1 == ovlan2)) {
|
|
PMD_DRV_LOG(NOTICE,
|
|
"mf_mode=SD functions %d and %d "
|
|
"have the same ovlan (%d)",
|
|
i, j, ovlan1);
|
|
return 1;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
/* MULTI_FUNCTION_SD */
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_get_mf_cfg_info(struct bnx2x_softc *sc)
|
|
{
|
|
struct bnx2x_mf_info *mf_info = &sc->devinfo.mf_info;
|
|
uint32_t val, mac_upper;
|
|
uint8_t i, vnic;
|
|
|
|
/* initialize mf_info defaults */
|
|
mf_info->vnics_per_port = 1;
|
|
mf_info->multi_vnics_mode = FALSE;
|
|
mf_info->path_has_ovlan = FALSE;
|
|
mf_info->mf_mode = SINGLE_FUNCTION;
|
|
|
|
if (!CHIP_IS_MF_CAP(sc)) {
|
|
return 0;
|
|
}
|
|
|
|
if (sc->devinfo.mf_cfg_base == SHMEM_MF_CFG_ADDR_NONE) {
|
|
PMD_DRV_LOG(NOTICE, "Invalid mf_cfg_base!");
|
|
return 1;
|
|
}
|
|
|
|
/* get the MF mode (switch dependent / independent / single-function) */
|
|
|
|
val = SHMEM_RD(sc, dev_info.shared_feature_config.config);
|
|
|
|
switch (val & SHARED_FEAT_CFG_FORCE_SF_MODE_MASK) {
|
|
case SHARED_FEAT_CFG_FORCE_SF_MODE_SWITCH_INDEPT:
|
|
|
|
mac_upper =
|
|
MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].mac_upper);
|
|
|
|
/* check for legal upper mac bytes */
|
|
if (mac_upper != FUNC_MF_CFG_UPPERMAC_DEFAULT) {
|
|
mf_info->mf_mode = MULTI_FUNCTION_SI;
|
|
} else {
|
|
PMD_DRV_LOG(NOTICE,
|
|
"Invalid config for Switch Independent mode");
|
|
}
|
|
|
|
break;
|
|
|
|
case SHARED_FEAT_CFG_FORCE_SF_MODE_MF_ALLOWED:
|
|
case SHARED_FEAT_CFG_FORCE_SF_MODE_SPIO4:
|
|
|
|
/* get outer vlan configuration */
|
|
val = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].e1hov_tag);
|
|
|
|
if ((val & FUNC_MF_CFG_E1HOV_TAG_MASK) !=
|
|
FUNC_MF_CFG_E1HOV_TAG_DEFAULT) {
|
|
mf_info->mf_mode = MULTI_FUNCTION_SD;
|
|
} else {
|
|
PMD_DRV_LOG(NOTICE,
|
|
"Invalid config for Switch Dependent mode");
|
|
}
|
|
|
|
break;
|
|
|
|
case SHARED_FEAT_CFG_FORCE_SF_MODE_FORCED_SF:
|
|
|
|
/* not in MF mode, vnics_per_port=1 and multi_vnics_mode=FALSE */
|
|
return 0;
|
|
|
|
case SHARED_FEAT_CFG_FORCE_SF_MODE_AFEX_MODE:
|
|
|
|
/*
|
|
* Mark MF mode as NIV if MCP version includes NPAR-SD support
|
|
* and the MAC address is valid.
|
|
*/
|
|
mac_upper =
|
|
MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].mac_upper);
|
|
|
|
if ((SHMEM2_HAS(sc, afex_driver_support)) &&
|
|
(mac_upper != FUNC_MF_CFG_UPPERMAC_DEFAULT)) {
|
|
mf_info->mf_mode = MULTI_FUNCTION_AFEX;
|
|
} else {
|
|
PMD_DRV_LOG(NOTICE, "Invalid config for AFEX mode");
|
|
}
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
PMD_DRV_LOG(NOTICE, "Unknown MF mode (0x%08x)",
|
|
(val & SHARED_FEAT_CFG_FORCE_SF_MODE_MASK));
|
|
|
|
return 1;
|
|
}
|
|
|
|
/* set path mf_mode (which could be different than function mf_mode) */
|
|
if (mf_info->mf_mode == MULTI_FUNCTION_SD) {
|
|
mf_info->path_has_ovlan = TRUE;
|
|
} else if (mf_info->mf_mode == SINGLE_FUNCTION) {
|
|
/*
|
|
* Decide on path multi vnics mode. If we're not in MF mode and in
|
|
* 4-port mode, this is good enough to check vnic-0 of the other port
|
|
* on the same path
|
|
*/
|
|
if (CHIP_PORT_MODE(sc) == CHIP_4_PORT_MODE) {
|
|
uint8_t other_port = !(PORT_ID(sc) & 1);
|
|
uint8_t abs_func_other_port =
|
|
(SC_PATH(sc) + (2 * other_port));
|
|
|
|
val =
|
|
MFCFG_RD(sc,
|
|
func_mf_config
|
|
[abs_func_other_port].e1hov_tag);
|
|
|
|
mf_info->path_has_ovlan = VALID_OVLAN((uint16_t) val);
|
|
}
|
|
}
|
|
|
|
if (mf_info->mf_mode == SINGLE_FUNCTION) {
|
|
/* invalid MF config */
|
|
if (SC_VN(sc) >= 1) {
|
|
PMD_DRV_LOG(NOTICE, "VNIC ID >= 1 in SF mode");
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* get the MF configuration */
|
|
mf_info->mf_config[SC_VN(sc)] =
|
|
MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].config);
|
|
|
|
switch (mf_info->mf_mode) {
|
|
case MULTI_FUNCTION_SD:
|
|
|
|
bnx2x_get_shmem_mf_cfg_info_sd(sc);
|
|
break;
|
|
|
|
case MULTI_FUNCTION_SI:
|
|
|
|
bnx2x_get_shmem_mf_cfg_info_si(sc);
|
|
break;
|
|
|
|
case MULTI_FUNCTION_AFEX:
|
|
|
|
bnx2x_get_shmem_mf_cfg_info_niv(sc);
|
|
break;
|
|
|
|
default:
|
|
|
|
PMD_DRV_LOG(NOTICE, "Get MF config failed (mf_mode=0x%08x)",
|
|
mf_info->mf_mode);
|
|
return 1;
|
|
}
|
|
|
|
/* get the congestion management parameters */
|
|
|
|
vnic = 0;
|
|
FOREACH_ABS_FUNC_IN_PORT(sc, i) {
|
|
/* get min/max bw */
|
|
val = MFCFG_RD(sc, func_mf_config[i].config);
|
|
mf_info->min_bw[vnic] =
|
|
((val & FUNC_MF_CFG_MIN_BW_MASK) >>
|
|
FUNC_MF_CFG_MIN_BW_SHIFT);
|
|
mf_info->max_bw[vnic] =
|
|
((val & FUNC_MF_CFG_MAX_BW_MASK) >>
|
|
FUNC_MF_CFG_MAX_BW_SHIFT);
|
|
vnic++;
|
|
}
|
|
|
|
return bnx2x_check_valid_mf_cfg(sc);
|
|
}
|
|
|
|
static int bnx2x_get_shmem_info(struct bnx2x_softc *sc)
|
|
{
|
|
int port;
|
|
uint32_t mac_hi, mac_lo, val;
|
|
|
|
PMD_INIT_FUNC_TRACE();
|
|
|
|
port = SC_PORT(sc);
|
|
mac_hi = mac_lo = 0;
|
|
|
|
sc->link_params.sc = sc;
|
|
sc->link_params.port = port;
|
|
|
|
/* get the hardware config info */
|
|
sc->devinfo.hw_config = SHMEM_RD(sc, dev_info.shared_hw_config.config);
|
|
sc->devinfo.hw_config2 =
|
|
SHMEM_RD(sc, dev_info.shared_hw_config.config2);
|
|
|
|
sc->link_params.hw_led_mode =
|
|
((sc->devinfo.hw_config & SHARED_HW_CFG_LED_MODE_MASK) >>
|
|
SHARED_HW_CFG_LED_MODE_SHIFT);
|
|
|
|
/* get the port feature config */
|
|
sc->port.config =
|
|
SHMEM_RD(sc, dev_info.port_feature_config[port].config);
|
|
|
|
/* get the link params */
|
|
sc->link_params.speed_cap_mask[ELINK_INT_PHY] =
|
|
SHMEM_RD(sc, dev_info.port_hw_config[port].speed_capability_mask)
|
|
& PORT_HW_CFG_SPEED_CAPABILITY_D0_MASK;
|
|
sc->link_params.speed_cap_mask[ELINK_EXT_PHY1] =
|
|
SHMEM_RD(sc, dev_info.port_hw_config[port].speed_capability_mask2)
|
|
& PORT_HW_CFG_SPEED_CAPABILITY_D0_MASK;
|
|
|
|
/* get the lane config */
|
|
sc->link_params.lane_config =
|
|
SHMEM_RD(sc, dev_info.port_hw_config[port].lane_config);
|
|
|
|
/* get the link config */
|
|
val = SHMEM_RD(sc, dev_info.port_feature_config[port].link_config);
|
|
sc->port.link_config[ELINK_INT_PHY] = val;
|
|
sc->link_params.switch_cfg = (val & PORT_FEATURE_CONNECTED_SWITCH_MASK);
|
|
sc->port.link_config[ELINK_EXT_PHY1] =
|
|
SHMEM_RD(sc, dev_info.port_feature_config[port].link_config2);
|
|
|
|
/* get the override preemphasis flag and enable it or turn it off */
|
|
val = SHMEM_RD(sc, dev_info.shared_feature_config.config);
|
|
if (val & SHARED_FEAT_CFG_OVERRIDE_PREEMPHASIS_CFG_ENABLED) {
|
|
sc->link_params.feature_config_flags |=
|
|
ELINK_FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED;
|
|
} else {
|
|
sc->link_params.feature_config_flags &=
|
|
~ELINK_FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED;
|
|
}
|
|
|
|
/* get the initial value of the link params */
|
|
sc->link_params.multi_phy_config =
|
|
SHMEM_RD(sc, dev_info.port_hw_config[port].multi_phy_config);
|
|
|
|
/* get external phy info */
|
|
sc->port.ext_phy_config =
|
|
SHMEM_RD(sc, dev_info.port_hw_config[port].external_phy_config);
|
|
|
|
/* get the multifunction configuration */
|
|
bnx2x_get_mf_cfg_info(sc);
|
|
|
|
/* get the mac address */
|
|
if (IS_MF(sc)) {
|
|
mac_hi =
|
|
MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].mac_upper);
|
|
mac_lo =
|
|
MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].mac_lower);
|
|
} else {
|
|
mac_hi = SHMEM_RD(sc, dev_info.port_hw_config[port].mac_upper);
|
|
mac_lo = SHMEM_RD(sc, dev_info.port_hw_config[port].mac_lower);
|
|
}
|
|
|
|
if ((mac_lo == 0) && (mac_hi == 0)) {
|
|
*sc->mac_addr_str = 0;
|
|
PMD_DRV_LOG(NOTICE, "No Ethernet address programmed!");
|
|
} else {
|
|
sc->link_params.mac_addr[0] = (uint8_t) (mac_hi >> 8);
|
|
sc->link_params.mac_addr[1] = (uint8_t) (mac_hi);
|
|
sc->link_params.mac_addr[2] = (uint8_t) (mac_lo >> 24);
|
|
sc->link_params.mac_addr[3] = (uint8_t) (mac_lo >> 16);
|
|
sc->link_params.mac_addr[4] = (uint8_t) (mac_lo >> 8);
|
|
sc->link_params.mac_addr[5] = (uint8_t) (mac_lo);
|
|
snprintf(sc->mac_addr_str, sizeof(sc->mac_addr_str),
|
|
"%02x:%02x:%02x:%02x:%02x:%02x",
|
|
sc->link_params.mac_addr[0],
|
|
sc->link_params.mac_addr[1],
|
|
sc->link_params.mac_addr[2],
|
|
sc->link_params.mac_addr[3],
|
|
sc->link_params.mac_addr[4],
|
|
sc->link_params.mac_addr[5]);
|
|
PMD_DRV_LOG(DEBUG, "Ethernet address: %s", sc->mac_addr_str);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bnx2x_media_detect(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t phy_idx = bnx2x_get_cur_phy_idx(sc);
|
|
switch (sc->link_params.phy[phy_idx].media_type) {
|
|
case ELINK_ETH_PHY_SFPP_10G_FIBER:
|
|
case ELINK_ETH_PHY_SFP_1G_FIBER:
|
|
case ELINK_ETH_PHY_XFP_FIBER:
|
|
case ELINK_ETH_PHY_KR:
|
|
case ELINK_ETH_PHY_CX4:
|
|
PMD_DRV_LOG(INFO, "Found 10GBase-CX4 media.");
|
|
sc->media = IFM_10G_CX4;
|
|
break;
|
|
case ELINK_ETH_PHY_DA_TWINAX:
|
|
PMD_DRV_LOG(INFO, "Found 10Gb Twinax media.");
|
|
sc->media = IFM_10G_TWINAX;
|
|
break;
|
|
case ELINK_ETH_PHY_BASE_T:
|
|
PMD_DRV_LOG(INFO, "Found 10GBase-T media.");
|
|
sc->media = IFM_10G_T;
|
|
break;
|
|
case ELINK_ETH_PHY_NOT_PRESENT:
|
|
PMD_DRV_LOG(INFO, "Media not present.");
|
|
sc->media = 0;
|
|
break;
|
|
case ELINK_ETH_PHY_UNSPECIFIED:
|
|
default:
|
|
PMD_DRV_LOG(INFO, "Unknown media!");
|
|
sc->media = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
#define GET_FIELD(value, fname) \
|
|
(((value) & (fname##_MASK)) >> (fname##_SHIFT))
|
|
#define IGU_FID(val) GET_FIELD((val), IGU_REG_MAPPING_MEMORY_FID)
|
|
#define IGU_VEC(val) GET_FIELD((val), IGU_REG_MAPPING_MEMORY_VECTOR)
|
|
|
|
static int bnx2x_get_igu_cam_info(struct bnx2x_softc *sc)
|
|
{
|
|
int pfid = SC_FUNC(sc);
|
|
int igu_sb_id;
|
|
uint32_t val;
|
|
uint8_t fid, igu_sb_cnt = 0;
|
|
|
|
sc->igu_base_sb = 0xff;
|
|
|
|
if (CHIP_INT_MODE_IS_BC(sc)) {
|
|
int vn = SC_VN(sc);
|
|
igu_sb_cnt = sc->igu_sb_cnt;
|
|
sc->igu_base_sb = ((CHIP_IS_MODE_4_PORT(sc) ? pfid : vn) *
|
|
FP_SB_MAX_E1x);
|
|
sc->igu_dsb_id = (E1HVN_MAX * FP_SB_MAX_E1x +
|
|
(CHIP_IS_MODE_4_PORT(sc) ? pfid : vn));
|
|
return 0;
|
|
}
|
|
|
|
/* IGU in normal mode - read CAM */
|
|
for (igu_sb_id = 0;
|
|
igu_sb_id < IGU_REG_MAPPING_MEMORY_SIZE; igu_sb_id++) {
|
|
val = REG_RD(sc, IGU_REG_MAPPING_MEMORY + igu_sb_id * 4);
|
|
if (!(val & IGU_REG_MAPPING_MEMORY_VALID)) {
|
|
continue;
|
|
}
|
|
fid = IGU_FID(val);
|
|
if ((fid & IGU_FID_ENCODE_IS_PF)) {
|
|
if ((fid & IGU_FID_PF_NUM_MASK) != pfid) {
|
|
continue;
|
|
}
|
|
if (IGU_VEC(val) == 0) {
|
|
/* default status block */
|
|
sc->igu_dsb_id = igu_sb_id;
|
|
} else {
|
|
if (sc->igu_base_sb == 0xff) {
|
|
sc->igu_base_sb = igu_sb_id;
|
|
}
|
|
igu_sb_cnt++;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Due to new PF resource allocation by MFW T7.4 and above, it's optional
|
|
* that number of CAM entries will not be equal to the value advertised in
|
|
* PCI. Driver should use the minimal value of both as the actual status
|
|
* block count
|
|
*/
|
|
sc->igu_sb_cnt = min(sc->igu_sb_cnt, igu_sb_cnt);
|
|
|
|
if (igu_sb_cnt == 0) {
|
|
PMD_DRV_LOG(ERR, "CAM configuration error");
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Gather various information from the device config space, the device itself,
|
|
* shmem, and the user input.
|
|
*/
|
|
static int bnx2x_get_device_info(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
int rc;
|
|
|
|
/* get the chip revision (chip metal comes from pci config space) */
|
|
sc->devinfo.chip_id = sc->link_params.chip_id =
|
|
(((REG_RD(sc, MISC_REG_CHIP_NUM) & 0xffff) << 16) |
|
|
((REG_RD(sc, MISC_REG_CHIP_REV) & 0xf) << 12) |
|
|
(((REG_RD(sc, PCICFG_OFFSET + PCI_ID_VAL3) >> 24) & 0xf) << 4) |
|
|
((REG_RD(sc, MISC_REG_BOND_ID) & 0xf) << 0));
|
|
|
|
/* force 57811 according to MISC register */
|
|
if (REG_RD(sc, MISC_REG_CHIP_TYPE) & MISC_REG_CHIP_TYPE_57811_MASK) {
|
|
if (CHIP_IS_57810(sc)) {
|
|
sc->devinfo.chip_id = ((CHIP_NUM_57811 << 16) |
|
|
(sc->
|
|
devinfo.chip_id & 0x0000ffff));
|
|
} else if (CHIP_IS_57810_MF(sc)) {
|
|
sc->devinfo.chip_id = ((CHIP_NUM_57811_MF << 16) |
|
|
(sc->
|
|
devinfo.chip_id & 0x0000ffff));
|
|
}
|
|
sc->devinfo.chip_id |= 0x1;
|
|
}
|
|
|
|
PMD_DRV_LOG(DEBUG,
|
|
"chip_id=0x%08x (num=0x%04x rev=0x%01x metal=0x%02x bond=0x%01x)",
|
|
sc->devinfo.chip_id,
|
|
((sc->devinfo.chip_id >> 16) & 0xffff),
|
|
((sc->devinfo.chip_id >> 12) & 0xf),
|
|
((sc->devinfo.chip_id >> 4) & 0xff),
|
|
((sc->devinfo.chip_id >> 0) & 0xf));
|
|
|
|
val = (REG_RD(sc, 0x2874) & 0x55);
|
|
if ((sc->devinfo.chip_id & 0x1) || (CHIP_IS_E1H(sc) && (val == 0x55))) {
|
|
sc->flags |= BNX2X_ONE_PORT_FLAG;
|
|
PMD_DRV_LOG(DEBUG, "single port device");
|
|
}
|
|
|
|
/* set the doorbell size */
|
|
sc->doorbell_size = (1 << BNX2X_DB_SHIFT);
|
|
|
|
/* determine whether the device is in 2 port or 4 port mode */
|
|
sc->devinfo.chip_port_mode = CHIP_PORT_MODE_NONE; /* E1h */
|
|
if (CHIP_IS_E2E3(sc)) {
|
|
/*
|
|
* Read port4mode_en_ovwr[0]:
|
|
* If 1, four port mode is in port4mode_en_ovwr[1].
|
|
* If 0, four port mode is in port4mode_en[0].
|
|
*/
|
|
val = REG_RD(sc, MISC_REG_PORT4MODE_EN_OVWR);
|
|
if (val & 1) {
|
|
val = ((val >> 1) & 1);
|
|
} else {
|
|
val = REG_RD(sc, MISC_REG_PORT4MODE_EN);
|
|
}
|
|
|
|
sc->devinfo.chip_port_mode =
|
|
(val) ? CHIP_4_PORT_MODE : CHIP_2_PORT_MODE;
|
|
|
|
PMD_DRV_LOG(DEBUG, "Port mode = %s", (val) ? "4" : "2");
|
|
}
|
|
|
|
/* get the function and path info for the device */
|
|
bnx2x_get_function_num(sc);
|
|
|
|
/* get the shared memory base address */
|
|
sc->devinfo.shmem_base =
|
|
sc->link_params.shmem_base = REG_RD(sc, MISC_REG_SHARED_MEM_ADDR);
|
|
sc->devinfo.shmem2_base =
|
|
REG_RD(sc, (SC_PATH(sc) ? MISC_REG_GENERIC_CR_1 :
|
|
MISC_REG_GENERIC_CR_0));
|
|
|
|
if (!sc->devinfo.shmem_base) {
|
|
/* this should ONLY prevent upcoming shmem reads */
|
|
PMD_DRV_LOG(INFO, "MCP not active");
|
|
sc->flags |= BNX2X_NO_MCP_FLAG;
|
|
return 0;
|
|
}
|
|
|
|
/* make sure the shared memory contents are valid */
|
|
val = SHMEM_RD(sc, validity_map[SC_PORT(sc)]);
|
|
if ((val & (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) !=
|
|
(SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) {
|
|
PMD_DRV_LOG(NOTICE, "Invalid SHMEM validity signature: 0x%08x",
|
|
val);
|
|
return 0;
|
|
}
|
|
|
|
/* get the bootcode version */
|
|
sc->devinfo.bc_ver = SHMEM_RD(sc, dev_info.bc_rev);
|
|
snprintf(sc->devinfo.bc_ver_str,
|
|
sizeof(sc->devinfo.bc_ver_str),
|
|
"%d.%d.%d",
|
|
((sc->devinfo.bc_ver >> 24) & 0xff),
|
|
((sc->devinfo.bc_ver >> 16) & 0xff),
|
|
((sc->devinfo.bc_ver >> 8) & 0xff));
|
|
PMD_DRV_LOG(INFO, "Bootcode version: %s", sc->devinfo.bc_ver_str);
|
|
|
|
/* get the bootcode shmem address */
|
|
sc->devinfo.mf_cfg_base = bnx2x_get_shmem_mf_cfg_base(sc);
|
|
|
|
/* clean indirect addresses as they're not used */
|
|
pci_write_long(sc, PCICFG_GRC_ADDRESS, 0);
|
|
if (IS_PF(sc)) {
|
|
REG_WR(sc, PXP2_REG_PGL_ADDR_88_F0, 0);
|
|
REG_WR(sc, PXP2_REG_PGL_ADDR_8C_F0, 0);
|
|
REG_WR(sc, PXP2_REG_PGL_ADDR_90_F0, 0);
|
|
REG_WR(sc, PXP2_REG_PGL_ADDR_94_F0, 0);
|
|
if (CHIP_IS_E1x(sc)) {
|
|
REG_WR(sc, PXP2_REG_PGL_ADDR_88_F1, 0);
|
|
REG_WR(sc, PXP2_REG_PGL_ADDR_8C_F1, 0);
|
|
REG_WR(sc, PXP2_REG_PGL_ADDR_90_F1, 0);
|
|
REG_WR(sc, PXP2_REG_PGL_ADDR_94_F1, 0);
|
|
}
|
|
|
|
/*
|
|
* Enable internal target-read (in case we are probed after PF
|
|
* FLR). Must be done prior to any BAR read access. Only for
|
|
* 57712 and up
|
|
*/
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ,
|
|
1);
|
|
}
|
|
}
|
|
|
|
/* get the nvram size */
|
|
val = REG_RD(sc, MCP_REG_MCPR_NVM_CFG4);
|
|
sc->devinfo.flash_size =
|
|
(NVRAM_1MB_SIZE << (val & MCPR_NVM_CFG4_FLASH_SIZE));
|
|
|
|
bnx2x_set_power_state(sc, PCI_PM_D0);
|
|
/* get various configuration parameters from shmem */
|
|
bnx2x_get_shmem_info(sc);
|
|
|
|
/* initialize IGU parameters */
|
|
if (CHIP_IS_E1x(sc)) {
|
|
sc->devinfo.int_block = INT_BLOCK_HC;
|
|
sc->igu_dsb_id = DEF_SB_IGU_ID;
|
|
sc->igu_base_sb = 0;
|
|
} else {
|
|
sc->devinfo.int_block = INT_BLOCK_IGU;
|
|
|
|
/* do not allow device reset during IGU info preocessing */
|
|
bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RESET);
|
|
|
|
val = REG_RD(sc, IGU_REG_BLOCK_CONFIGURATION);
|
|
|
|
if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) {
|
|
int tout = 5000;
|
|
|
|
val &= ~(IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN);
|
|
REG_WR(sc, IGU_REG_BLOCK_CONFIGURATION, val);
|
|
REG_WR(sc, IGU_REG_RESET_MEMORIES, 0x7f);
|
|
|
|
while (tout && REG_RD(sc, IGU_REG_RESET_MEMORIES)) {
|
|
tout--;
|
|
DELAY(1000);
|
|
}
|
|
|
|
if (REG_RD(sc, IGU_REG_RESET_MEMORIES)) {
|
|
PMD_DRV_LOG(NOTICE,
|
|
"FORCING IGU Normal Mode failed!!!");
|
|
bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RESET);
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) {
|
|
PMD_DRV_LOG(DEBUG, "IGU Backward Compatible Mode");
|
|
sc->devinfo.int_block |= INT_BLOCK_MODE_BW_COMP;
|
|
} else {
|
|
PMD_DRV_LOG(DEBUG, "IGU Normal Mode");
|
|
}
|
|
|
|
rc = bnx2x_get_igu_cam_info(sc);
|
|
|
|
bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RESET);
|
|
|
|
if (rc) {
|
|
return rc;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Get base FW non-default (fast path) status block ID. This value is
|
|
* used to initialize the fw_sb_id saved on the fp/queue structure to
|
|
* determine the id used by the FW.
|
|
*/
|
|
if (CHIP_IS_E1x(sc)) {
|
|
sc->base_fw_ndsb =
|
|
((SC_PORT(sc) * FP_SB_MAX_E1x) + SC_L_ID(sc));
|
|
} else {
|
|
/*
|
|
* 57712+ - We currently use one FW SB per IGU SB (Rx and Tx of
|
|
* the same queue are indicated on the same IGU SB). So we prefer
|
|
* FW and IGU SBs to be the same value.
|
|
*/
|
|
sc->base_fw_ndsb = sc->igu_base_sb;
|
|
}
|
|
|
|
elink_phy_probe(&sc->link_params);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
bnx2x_link_settings_supported(struct bnx2x_softc *sc, uint32_t switch_cfg)
|
|
{
|
|
uint32_t cfg_size = 0;
|
|
uint32_t idx;
|
|
uint8_t port = SC_PORT(sc);
|
|
|
|
/* aggregation of supported attributes of all external phys */
|
|
sc->port.supported[0] = 0;
|
|
sc->port.supported[1] = 0;
|
|
|
|
switch (sc->link_params.num_phys) {
|
|
case 1:
|
|
sc->port.supported[0] =
|
|
sc->link_params.phy[ELINK_INT_PHY].supported;
|
|
cfg_size = 1;
|
|
break;
|
|
case 2:
|
|
sc->port.supported[0] =
|
|
sc->link_params.phy[ELINK_EXT_PHY1].supported;
|
|
cfg_size = 1;
|
|
break;
|
|
case 3:
|
|
if (sc->link_params.multi_phy_config &
|
|
PORT_HW_CFG_PHY_SWAPPED_ENABLED) {
|
|
sc->port.supported[1] =
|
|
sc->link_params.phy[ELINK_EXT_PHY1].supported;
|
|
sc->port.supported[0] =
|
|
sc->link_params.phy[ELINK_EXT_PHY2].supported;
|
|
} else {
|
|
sc->port.supported[0] =
|
|
sc->link_params.phy[ELINK_EXT_PHY1].supported;
|
|
sc->port.supported[1] =
|
|
sc->link_params.phy[ELINK_EXT_PHY2].supported;
|
|
}
|
|
cfg_size = 2;
|
|
break;
|
|
}
|
|
|
|
if (!(sc->port.supported[0] || sc->port.supported[1])) {
|
|
PMD_DRV_LOG(ERR,
|
|
"Invalid phy config in NVRAM (PHY1=0x%08x PHY2=0x%08x)",
|
|
SHMEM_RD(sc,
|
|
dev_info.port_hw_config
|
|
[port].external_phy_config),
|
|
SHMEM_RD(sc,
|
|
dev_info.port_hw_config
|
|
[port].external_phy_config2));
|
|
return;
|
|
}
|
|
|
|
if (CHIP_IS_E3(sc))
|
|
sc->port.phy_addr = REG_RD(sc, MISC_REG_WC0_CTRL_PHY_ADDR);
|
|
else {
|
|
switch (switch_cfg) {
|
|
case ELINK_SWITCH_CFG_1G:
|
|
sc->port.phy_addr =
|
|
REG_RD(sc,
|
|
NIG_REG_SERDES0_CTRL_PHY_ADDR + port * 0x10);
|
|
break;
|
|
case ELINK_SWITCH_CFG_10G:
|
|
sc->port.phy_addr =
|
|
REG_RD(sc,
|
|
NIG_REG_XGXS0_CTRL_PHY_ADDR + port * 0x18);
|
|
break;
|
|
default:
|
|
PMD_DRV_LOG(ERR,
|
|
"Invalid switch config in"
|
|
"link_config=0x%08x",
|
|
sc->port.link_config[0]);
|
|
return;
|
|
}
|
|
}
|
|
|
|
PMD_DRV_LOG(INFO, "PHY addr 0x%08x", sc->port.phy_addr);
|
|
|
|
/* mask what we support according to speed_cap_mask per configuration */
|
|
for (idx = 0; idx < cfg_size; idx++) {
|
|
if (!(sc->link_params.speed_cap_mask[idx] &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)) {
|
|
sc->port.supported[idx] &=
|
|
~ELINK_SUPPORTED_10baseT_Half;
|
|
}
|
|
|
|
if (!(sc->link_params.speed_cap_mask[idx] &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL)) {
|
|
sc->port.supported[idx] &=
|
|
~ELINK_SUPPORTED_10baseT_Full;
|
|
}
|
|
|
|
if (!(sc->link_params.speed_cap_mask[idx] &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)) {
|
|
sc->port.supported[idx] &=
|
|
~ELINK_SUPPORTED_100baseT_Half;
|
|
}
|
|
|
|
if (!(sc->link_params.speed_cap_mask[idx] &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL)) {
|
|
sc->port.supported[idx] &=
|
|
~ELINK_SUPPORTED_100baseT_Full;
|
|
}
|
|
|
|
if (!(sc->link_params.speed_cap_mask[idx] &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) {
|
|
sc->port.supported[idx] &=
|
|
~ELINK_SUPPORTED_1000baseT_Full;
|
|
}
|
|
|
|
if (!(sc->link_params.speed_cap_mask[idx] &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G)) {
|
|
sc->port.supported[idx] &=
|
|
~ELINK_SUPPORTED_2500baseX_Full;
|
|
}
|
|
|
|
if (!(sc->link_params.speed_cap_mask[idx] &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) {
|
|
sc->port.supported[idx] &=
|
|
~ELINK_SUPPORTED_10000baseT_Full;
|
|
}
|
|
|
|
if (!(sc->link_params.speed_cap_mask[idx] &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_20G)) {
|
|
sc->port.supported[idx] &=
|
|
~ELINK_SUPPORTED_20000baseKR2_Full;
|
|
}
|
|
}
|
|
|
|
PMD_DRV_LOG(INFO, "PHY supported 0=0x%08x 1=0x%08x",
|
|
sc->port.supported[0], sc->port.supported[1]);
|
|
}
|
|
|
|
static void bnx2x_link_settings_requested(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t link_config;
|
|
uint32_t idx;
|
|
uint32_t cfg_size = 0;
|
|
|
|
sc->port.advertising[0] = 0;
|
|
sc->port.advertising[1] = 0;
|
|
|
|
switch (sc->link_params.num_phys) {
|
|
case 1:
|
|
case 2:
|
|
cfg_size = 1;
|
|
break;
|
|
case 3:
|
|
cfg_size = 2;
|
|
break;
|
|
}
|
|
|
|
for (idx = 0; idx < cfg_size; idx++) {
|
|
sc->link_params.req_duplex[idx] = DUPLEX_FULL;
|
|
link_config = sc->port.link_config[idx];
|
|
|
|
switch (link_config & PORT_FEATURE_LINK_SPEED_MASK) {
|
|
case PORT_FEATURE_LINK_SPEED_AUTO:
|
|
if (sc->port.supported[idx] & ELINK_SUPPORTED_Autoneg) {
|
|
sc->link_params.req_line_speed[idx] =
|
|
ELINK_SPEED_AUTO_NEG;
|
|
sc->port.advertising[idx] |=
|
|
sc->port.supported[idx];
|
|
if (sc->link_params.phy[ELINK_EXT_PHY1].type ==
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833)
|
|
sc->port.advertising[idx] |=
|
|
(ELINK_SUPPORTED_100baseT_Half |
|
|
ELINK_SUPPORTED_100baseT_Full);
|
|
} else {
|
|
/* force 10G, no AN */
|
|
sc->link_params.req_line_speed[idx] =
|
|
ELINK_SPEED_10000;
|
|
sc->port.advertising[idx] |=
|
|
(ADVERTISED_10000baseT_Full |
|
|
ADVERTISED_FIBRE);
|
|
continue;
|
|
}
|
|
break;
|
|
|
|
case PORT_FEATURE_LINK_SPEED_10M_FULL:
|
|
if (sc->
|
|
port.supported[idx] & ELINK_SUPPORTED_10baseT_Full)
|
|
{
|
|
sc->link_params.req_line_speed[idx] =
|
|
ELINK_SPEED_10;
|
|
sc->port.advertising[idx] |=
|
|
(ADVERTISED_10baseT_Full | ADVERTISED_TP);
|
|
} else {
|
|
PMD_DRV_LOG(ERR,
|
|
"Invalid NVRAM config link_config=0x%08x "
|
|
"speed_cap_mask=0x%08x",
|
|
link_config,
|
|
sc->
|
|
link_params.speed_cap_mask[idx]);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case PORT_FEATURE_LINK_SPEED_10M_HALF:
|
|
if (sc->
|
|
port.supported[idx] & ELINK_SUPPORTED_10baseT_Half)
|
|
{
|
|
sc->link_params.req_line_speed[idx] =
|
|
ELINK_SPEED_10;
|
|
sc->link_params.req_duplex[idx] = DUPLEX_HALF;
|
|
sc->port.advertising[idx] |=
|
|
(ADVERTISED_10baseT_Half | ADVERTISED_TP);
|
|
} else {
|
|
PMD_DRV_LOG(ERR,
|
|
"Invalid NVRAM config link_config=0x%08x "
|
|
"speed_cap_mask=0x%08x",
|
|
link_config,
|
|
sc->
|
|
link_params.speed_cap_mask[idx]);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case PORT_FEATURE_LINK_SPEED_100M_FULL:
|
|
if (sc->
|
|
port.supported[idx] & ELINK_SUPPORTED_100baseT_Full)
|
|
{
|
|
sc->link_params.req_line_speed[idx] =
|
|
ELINK_SPEED_100;
|
|
sc->port.advertising[idx] |=
|
|
(ADVERTISED_100baseT_Full | ADVERTISED_TP);
|
|
} else {
|
|
PMD_DRV_LOG(ERR,
|
|
"Invalid NVRAM config link_config=0x%08x "
|
|
"speed_cap_mask=0x%08x",
|
|
link_config,
|
|
sc->
|
|
link_params.speed_cap_mask[idx]);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case PORT_FEATURE_LINK_SPEED_100M_HALF:
|
|
if (sc->
|
|
port.supported[idx] & ELINK_SUPPORTED_100baseT_Half)
|
|
{
|
|
sc->link_params.req_line_speed[idx] =
|
|
ELINK_SPEED_100;
|
|
sc->link_params.req_duplex[idx] = DUPLEX_HALF;
|
|
sc->port.advertising[idx] |=
|
|
(ADVERTISED_100baseT_Half | ADVERTISED_TP);
|
|
} else {
|
|
PMD_DRV_LOG(ERR,
|
|
"Invalid NVRAM config link_config=0x%08x "
|
|
"speed_cap_mask=0x%08x",
|
|
link_config,
|
|
sc->
|
|
link_params.speed_cap_mask[idx]);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case PORT_FEATURE_LINK_SPEED_1G:
|
|
if (sc->port.supported[idx] &
|
|
ELINK_SUPPORTED_1000baseT_Full) {
|
|
sc->link_params.req_line_speed[idx] =
|
|
ELINK_SPEED_1000;
|
|
sc->port.advertising[idx] |=
|
|
(ADVERTISED_1000baseT_Full | ADVERTISED_TP);
|
|
} else {
|
|
PMD_DRV_LOG(ERR,
|
|
"Invalid NVRAM config link_config=0x%08x "
|
|
"speed_cap_mask=0x%08x",
|
|
link_config,
|
|
sc->
|
|
link_params.speed_cap_mask[idx]);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case PORT_FEATURE_LINK_SPEED_2_5G:
|
|
if (sc->port.supported[idx] &
|
|
ELINK_SUPPORTED_2500baseX_Full) {
|
|
sc->link_params.req_line_speed[idx] =
|
|
ELINK_SPEED_2500;
|
|
sc->port.advertising[idx] |=
|
|
(ADVERTISED_2500baseX_Full | ADVERTISED_TP);
|
|
} else {
|
|
PMD_DRV_LOG(ERR,
|
|
"Invalid NVRAM config link_config=0x%08x "
|
|
"speed_cap_mask=0x%08x",
|
|
link_config,
|
|
sc->
|
|
link_params.speed_cap_mask[idx]);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case PORT_FEATURE_LINK_SPEED_10G_CX4:
|
|
if (sc->port.supported[idx] &
|
|
ELINK_SUPPORTED_10000baseT_Full) {
|
|
sc->link_params.req_line_speed[idx] =
|
|
ELINK_SPEED_10000;
|
|
sc->port.advertising[idx] |=
|
|
(ADVERTISED_10000baseT_Full |
|
|
ADVERTISED_FIBRE);
|
|
} else {
|
|
PMD_DRV_LOG(ERR,
|
|
"Invalid NVRAM config link_config=0x%08x "
|
|
"speed_cap_mask=0x%08x",
|
|
link_config,
|
|
sc->
|
|
link_params.speed_cap_mask[idx]);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case PORT_FEATURE_LINK_SPEED_20G:
|
|
sc->link_params.req_line_speed[idx] = ELINK_SPEED_20000;
|
|
break;
|
|
|
|
default:
|
|
PMD_DRV_LOG(ERR,
|
|
"Invalid NVRAM config link_config=0x%08x "
|
|
"speed_cap_mask=0x%08x", link_config,
|
|
sc->link_params.speed_cap_mask[idx]);
|
|
sc->link_params.req_line_speed[idx] =
|
|
ELINK_SPEED_AUTO_NEG;
|
|
sc->port.advertising[idx] = sc->port.supported[idx];
|
|
break;
|
|
}
|
|
|
|
sc->link_params.req_flow_ctrl[idx] =
|
|
(link_config & PORT_FEATURE_FLOW_CONTROL_MASK);
|
|
|
|
if (sc->link_params.req_flow_ctrl[idx] == ELINK_FLOW_CTRL_AUTO) {
|
|
if (!
|
|
(sc->
|
|
port.supported[idx] & ELINK_SUPPORTED_Autoneg)) {
|
|
sc->link_params.req_flow_ctrl[idx] =
|
|
ELINK_FLOW_CTRL_NONE;
|
|
} else {
|
|
bnx2x_set_requested_fc(sc);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static void bnx2x_get_phy_info(struct bnx2x_softc *sc)
|
|
{
|
|
uint8_t port = SC_PORT(sc);
|
|
uint32_t eee_mode;
|
|
|
|
PMD_INIT_FUNC_TRACE();
|
|
|
|
/* shmem data already read in bnx2x_get_shmem_info() */
|
|
|
|
bnx2x_link_settings_supported(sc, sc->link_params.switch_cfg);
|
|
bnx2x_link_settings_requested(sc);
|
|
|
|
/* configure link feature according to nvram value */
|
|
eee_mode =
|
|
(((SHMEM_RD(sc, dev_info.port_feature_config[port].eee_power_mode))
|
|
& PORT_FEAT_CFG_EEE_POWER_MODE_MASK) >>
|
|
PORT_FEAT_CFG_EEE_POWER_MODE_SHIFT);
|
|
if (eee_mode != PORT_FEAT_CFG_EEE_POWER_MODE_DISABLED) {
|
|
sc->link_params.eee_mode = (ELINK_EEE_MODE_ADV_LPI |
|
|
ELINK_EEE_MODE_ENABLE_LPI |
|
|
ELINK_EEE_MODE_OUTPUT_TIME);
|
|
} else {
|
|
sc->link_params.eee_mode = 0;
|
|
}
|
|
|
|
/* get the media type */
|
|
bnx2x_media_detect(sc);
|
|
}
|
|
|
|
static void bnx2x_set_modes_bitmap(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t flags = MODE_ASIC | MODE_PORT2;
|
|
|
|
if (CHIP_IS_E2(sc)) {
|
|
flags |= MODE_E2;
|
|
} else if (CHIP_IS_E3(sc)) {
|
|
flags |= MODE_E3;
|
|
if (CHIP_REV(sc) == CHIP_REV_Ax) {
|
|
flags |= MODE_E3_A0;
|
|
} else { /*if (CHIP_REV(sc) == CHIP_REV_Bx) */
|
|
|
|
flags |= MODE_E3_B0 | MODE_COS3;
|
|
}
|
|
}
|
|
|
|
if (IS_MF(sc)) {
|
|
flags |= MODE_MF;
|
|
switch (sc->devinfo.mf_info.mf_mode) {
|
|
case MULTI_FUNCTION_SD:
|
|
flags |= MODE_MF_SD;
|
|
break;
|
|
case MULTI_FUNCTION_SI:
|
|
flags |= MODE_MF_SI;
|
|
break;
|
|
case MULTI_FUNCTION_AFEX:
|
|
flags |= MODE_MF_AFEX;
|
|
break;
|
|
}
|
|
} else {
|
|
flags |= MODE_SF;
|
|
}
|
|
|
|
#if defined(__LITTLE_ENDIAN)
|
|
flags |= MODE_LITTLE_ENDIAN;
|
|
#else /* __BIG_ENDIAN */
|
|
flags |= MODE_BIG_ENDIAN;
|
|
#endif
|
|
|
|
INIT_MODE_FLAGS(sc) = flags;
|
|
}
|
|
|
|
int bnx2x_alloc_hsi_mem(struct bnx2x_softc *sc)
|
|
{
|
|
struct bnx2x_fastpath *fp;
|
|
char buf[32];
|
|
uint32_t i;
|
|
|
|
if (IS_PF(sc)) {
|
|
/************************/
|
|
/* DEFAULT STATUS BLOCK */
|
|
/************************/
|
|
|
|
if (bnx2x_dma_alloc(sc, sizeof(struct host_sp_status_block),
|
|
&sc->def_sb_dma, "def_sb",
|
|
RTE_CACHE_LINE_SIZE) != 0) {
|
|
return -1;
|
|
}
|
|
|
|
sc->def_sb =
|
|
(struct host_sp_status_block *)sc->def_sb_dma.vaddr;
|
|
/***************/
|
|
/* EVENT QUEUE */
|
|
/***************/
|
|
|
|
if (bnx2x_dma_alloc(sc, BNX2X_PAGE_SIZE,
|
|
&sc->eq_dma, "ev_queue",
|
|
RTE_CACHE_LINE_SIZE) != 0) {
|
|
sc->def_sb = NULL;
|
|
return -1;
|
|
}
|
|
|
|
sc->eq = (union event_ring_elem *)sc->eq_dma.vaddr;
|
|
|
|
/*************/
|
|
/* SLOW PATH */
|
|
/*************/
|
|
|
|
if (bnx2x_dma_alloc(sc, sizeof(struct bnx2x_slowpath),
|
|
&sc->sp_dma, "sp",
|
|
RTE_CACHE_LINE_SIZE) != 0) {
|
|
sc->eq = NULL;
|
|
sc->def_sb = NULL;
|
|
return -1;
|
|
}
|
|
|
|
sc->sp = (struct bnx2x_slowpath *)sc->sp_dma.vaddr;
|
|
|
|
/*******************/
|
|
/* SLOW PATH QUEUE */
|
|
/*******************/
|
|
|
|
if (bnx2x_dma_alloc(sc, BNX2X_PAGE_SIZE,
|
|
&sc->spq_dma, "sp_queue",
|
|
RTE_CACHE_LINE_SIZE) != 0) {
|
|
sc->sp = NULL;
|
|
sc->eq = NULL;
|
|
sc->def_sb = NULL;
|
|
return -1;
|
|
}
|
|
|
|
sc->spq = (struct eth_spe *)sc->spq_dma.vaddr;
|
|
|
|
/***************************/
|
|
/* FW DECOMPRESSION BUFFER */
|
|
/***************************/
|
|
|
|
if (bnx2x_dma_alloc(sc, FW_BUF_SIZE, &sc->gz_buf_dma,
|
|
"fw_buf", RTE_CACHE_LINE_SIZE) != 0) {
|
|
sc->spq = NULL;
|
|
sc->sp = NULL;
|
|
sc->eq = NULL;
|
|
sc->def_sb = NULL;
|
|
return -1;
|
|
}
|
|
|
|
sc->gz_buf = (void *)sc->gz_buf_dma.vaddr;
|
|
}
|
|
|
|
/*************/
|
|
/* FASTPATHS */
|
|
/*************/
|
|
|
|
/* allocate DMA memory for each fastpath structure */
|
|
for (i = 0; i < sc->num_queues; i++) {
|
|
fp = &sc->fp[i];
|
|
fp->sc = sc;
|
|
fp->index = i;
|
|
|
|
/*******************/
|
|
/* FP STATUS BLOCK */
|
|
/*******************/
|
|
|
|
snprintf(buf, sizeof(buf), "fp_%d_sb", i);
|
|
if (bnx2x_dma_alloc(sc, sizeof(union bnx2x_host_hc_status_block),
|
|
&fp->sb_dma, buf, RTE_CACHE_LINE_SIZE) != 0) {
|
|
PMD_DRV_LOG(NOTICE, "Failed to alloc %s", buf);
|
|
return -1;
|
|
} else {
|
|
if (CHIP_IS_E2E3(sc)) {
|
|
fp->status_block.e2_sb =
|
|
(struct host_hc_status_block_e2 *)
|
|
fp->sb_dma.vaddr;
|
|
} else {
|
|
fp->status_block.e1x_sb =
|
|
(struct host_hc_status_block_e1x *)
|
|
fp->sb_dma.vaddr;
|
|
}
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void bnx2x_free_hsi_mem(struct bnx2x_softc *sc)
|
|
{
|
|
struct bnx2x_fastpath *fp;
|
|
int i;
|
|
|
|
for (i = 0; i < sc->num_queues; i++) {
|
|
fp = &sc->fp[i];
|
|
|
|
/*******************/
|
|
/* FP STATUS BLOCK */
|
|
/*******************/
|
|
|
|
memset(&fp->status_block, 0, sizeof(fp->status_block));
|
|
}
|
|
|
|
/***************************/
|
|
/* FW DECOMPRESSION BUFFER */
|
|
/***************************/
|
|
|
|
sc->gz_buf = NULL;
|
|
|
|
/*******************/
|
|
/* SLOW PATH QUEUE */
|
|
/*******************/
|
|
|
|
sc->spq = NULL;
|
|
|
|
/*************/
|
|
/* SLOW PATH */
|
|
/*************/
|
|
|
|
sc->sp = NULL;
|
|
|
|
/***************/
|
|
/* EVENT QUEUE */
|
|
/***************/
|
|
|
|
sc->eq = NULL;
|
|
|
|
/************************/
|
|
/* DEFAULT STATUS BLOCK */
|
|
/************************/
|
|
|
|
sc->def_sb = NULL;
|
|
|
|
}
|
|
|
|
/*
|
|
* Previous driver DMAE transaction may have occurred when pre-boot stage
|
|
* ended and boot began. This would invalidate the addresses of the
|
|
* transaction, resulting in was-error bit set in the PCI causing all
|
|
* hw-to-host PCIe transactions to timeout. If this happened we want to clear
|
|
* the interrupt which detected this from the pglueb and the was-done bit
|
|
*/
|
|
static void bnx2x_prev_interrupted_dmae(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
val = REG_RD(sc, PGLUE_B_REG_PGLUE_B_INT_STS);
|
|
if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN) {
|
|
REG_WR(sc, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR,
|
|
1 << SC_FUNC(sc));
|
|
}
|
|
}
|
|
}
|
|
|
|
static int bnx2x_prev_mcp_done(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t rc = bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_DONE,
|
|
DRV_MSG_CODE_UNLOAD_SKIP_LINK_RESET);
|
|
if (!rc) {
|
|
PMD_DRV_LOG(NOTICE, "MCP response failure, aborting");
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct bnx2x_prev_list_node *bnx2x_prev_path_get_entry(struct bnx2x_softc *sc)
|
|
{
|
|
struct bnx2x_prev_list_node *tmp;
|
|
|
|
LIST_FOREACH(tmp, &bnx2x_prev_list, node) {
|
|
if ((sc->pcie_bus == tmp->bus) &&
|
|
(sc->pcie_device == tmp->slot) &&
|
|
(SC_PATH(sc) == tmp->path)) {
|
|
return tmp;
|
|
}
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static uint8_t bnx2x_prev_is_path_marked(struct bnx2x_softc *sc)
|
|
{
|
|
struct bnx2x_prev_list_node *tmp;
|
|
int rc = FALSE;
|
|
|
|
rte_spinlock_lock(&bnx2x_prev_mtx);
|
|
|
|
tmp = bnx2x_prev_path_get_entry(sc);
|
|
if (tmp) {
|
|
if (tmp->aer) {
|
|
PMD_DRV_LOG(DEBUG,
|
|
"Path %d/%d/%d was marked by AER",
|
|
sc->pcie_bus, sc->pcie_device, SC_PATH(sc));
|
|
} else {
|
|
rc = TRUE;
|
|
PMD_DRV_LOG(DEBUG,
|
|
"Path %d/%d/%d was already cleaned from previous drivers",
|
|
sc->pcie_bus, sc->pcie_device, SC_PATH(sc));
|
|
}
|
|
}
|
|
|
|
rte_spinlock_unlock(&bnx2x_prev_mtx);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int bnx2x_prev_mark_path(struct bnx2x_softc *sc, uint8_t after_undi)
|
|
{
|
|
struct bnx2x_prev_list_node *tmp;
|
|
|
|
rte_spinlock_lock(&bnx2x_prev_mtx);
|
|
|
|
/* Check whether the entry for this path already exists */
|
|
tmp = bnx2x_prev_path_get_entry(sc);
|
|
if (tmp) {
|
|
if (!tmp->aer) {
|
|
PMD_DRV_LOG(DEBUG,
|
|
"Re-marking AER in path %d/%d/%d",
|
|
sc->pcie_bus, sc->pcie_device, SC_PATH(sc));
|
|
} else {
|
|
PMD_DRV_LOG(DEBUG,
|
|
"Removing AER indication from path %d/%d/%d",
|
|
sc->pcie_bus, sc->pcie_device, SC_PATH(sc));
|
|
tmp->aer = 0;
|
|
}
|
|
|
|
rte_spinlock_unlock(&bnx2x_prev_mtx);
|
|
return 0;
|
|
}
|
|
|
|
rte_spinlock_unlock(&bnx2x_prev_mtx);
|
|
|
|
/* Create an entry for this path and add it */
|
|
tmp = rte_malloc("", sizeof(struct bnx2x_prev_list_node),
|
|
RTE_CACHE_LINE_SIZE);
|
|
if (!tmp) {
|
|
PMD_DRV_LOG(NOTICE, "Failed to allocate 'bnx2x_prev_list_node'");
|
|
return -1;
|
|
}
|
|
|
|
tmp->bus = sc->pcie_bus;
|
|
tmp->slot = sc->pcie_device;
|
|
tmp->path = SC_PATH(sc);
|
|
tmp->aer = 0;
|
|
tmp->undi = after_undi ? (1 << SC_PORT(sc)) : 0;
|
|
|
|
rte_spinlock_lock(&bnx2x_prev_mtx);
|
|
|
|
LIST_INSERT_HEAD(&bnx2x_prev_list, tmp, node);
|
|
|
|
rte_spinlock_unlock(&bnx2x_prev_mtx);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_do_flr(struct bnx2x_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
/* only E2 and onwards support FLR */
|
|
if (CHIP_IS_E1x(sc)) {
|
|
PMD_DRV_LOG(WARNING, "FLR not supported in E1H");
|
|
return -1;
|
|
}
|
|
|
|
/* only bootcode REQ_BC_VER_4_INITIATE_FLR and onwards support flr */
|
|
if (sc->devinfo.bc_ver < REQ_BC_VER_4_INITIATE_FLR) {
|
|
PMD_DRV_LOG(WARNING,
|
|
"FLR not supported by BC_VER: 0x%08x",
|
|
sc->devinfo.bc_ver);
|
|
return -1;
|
|
}
|
|
|
|
/* Wait for Transaction Pending bit clean */
|
|
for (i = 0; i < 4; i++) {
|
|
if (i) {
|
|
DELAY(((1 << (i - 1)) * 100) * 1000);
|
|
}
|
|
|
|
if (!bnx2x_is_pcie_pending(sc)) {
|
|
goto clear;
|
|
}
|
|
}
|
|
|
|
PMD_DRV_LOG(NOTICE, "PCIE transaction is not cleared, "
|
|
"proceeding with reset anyway");
|
|
|
|
clear:
|
|
bnx2x_fw_command(sc, DRV_MSG_CODE_INITIATE_FLR, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct bnx2x_mac_vals {
|
|
uint32_t xmac_addr;
|
|
uint32_t xmac_val;
|
|
uint32_t emac_addr;
|
|
uint32_t emac_val;
|
|
uint32_t umac_addr;
|
|
uint32_t umac_val;
|
|
uint32_t bmac_addr;
|
|
uint32_t bmac_val[2];
|
|
};
|
|
|
|
static void
|
|
bnx2x_prev_unload_close_mac(struct bnx2x_softc *sc, struct bnx2x_mac_vals *vals)
|
|
{
|
|
uint32_t val, base_addr, offset, mask, reset_reg;
|
|
uint8_t mac_stopped = FALSE;
|
|
uint8_t port = SC_PORT(sc);
|
|
uint32_t wb_data[2];
|
|
|
|
/* reset addresses as they also mark which values were changed */
|
|
vals->bmac_addr = 0;
|
|
vals->umac_addr = 0;
|
|
vals->xmac_addr = 0;
|
|
vals->emac_addr = 0;
|
|
|
|
reset_reg = REG_RD(sc, MISC_REG_RESET_REG_2);
|
|
|
|
if (!CHIP_IS_E3(sc)) {
|
|
val = REG_RD(sc, NIG_REG_BMAC0_REGS_OUT_EN + port * 4);
|
|
mask = MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port;
|
|
if ((mask & reset_reg) && val) {
|
|
base_addr = SC_PORT(sc) ? NIG_REG_INGRESS_BMAC1_MEM
|
|
: NIG_REG_INGRESS_BMAC0_MEM;
|
|
offset = CHIP_IS_E2(sc) ? BIGMAC2_REGISTER_BMAC_CONTROL
|
|
: BIGMAC_REGISTER_BMAC_CONTROL;
|
|
|
|
/*
|
|
* use rd/wr since we cannot use dmae. This is safe
|
|
* since MCP won't access the bus due to the request
|
|
* to unload, and no function on the path can be
|
|
* loaded at this time.
|
|
*/
|
|
wb_data[0] = REG_RD(sc, base_addr + offset);
|
|
wb_data[1] = REG_RD(sc, base_addr + offset + 0x4);
|
|
vals->bmac_addr = base_addr + offset;
|
|
vals->bmac_val[0] = wb_data[0];
|
|
vals->bmac_val[1] = wb_data[1];
|
|
wb_data[0] &= ~ELINK_BMAC_CONTROL_RX_ENABLE;
|
|
REG_WR(sc, vals->bmac_addr, wb_data[0]);
|
|
REG_WR(sc, vals->bmac_addr + 0x4, wb_data[1]);
|
|
}
|
|
|
|
vals->emac_addr = NIG_REG_NIG_EMAC0_EN + SC_PORT(sc) * 4;
|
|
vals->emac_val = REG_RD(sc, vals->emac_addr);
|
|
REG_WR(sc, vals->emac_addr, 0);
|
|
mac_stopped = TRUE;
|
|
} else {
|
|
if (reset_reg & MISC_REGISTERS_RESET_REG_2_XMAC) {
|
|
base_addr = SC_PORT(sc) ? GRCBASE_XMAC1 : GRCBASE_XMAC0;
|
|
val = REG_RD(sc, base_addr + XMAC_REG_PFC_CTRL_HI);
|
|
REG_WR(sc, base_addr + XMAC_REG_PFC_CTRL_HI,
|
|
val & ~(1 << 1));
|
|
REG_WR(sc, base_addr + XMAC_REG_PFC_CTRL_HI,
|
|
val | (1 << 1));
|
|
vals->xmac_addr = base_addr + XMAC_REG_CTRL;
|
|
vals->xmac_val = REG_RD(sc, vals->xmac_addr);
|
|
REG_WR(sc, vals->xmac_addr, 0);
|
|
mac_stopped = TRUE;
|
|
}
|
|
|
|
mask = MISC_REGISTERS_RESET_REG_2_UMAC0 << port;
|
|
if (mask & reset_reg) {
|
|
base_addr = SC_PORT(sc) ? GRCBASE_UMAC1 : GRCBASE_UMAC0;
|
|
vals->umac_addr = base_addr + UMAC_REG_COMMAND_CONFIG;
|
|
vals->umac_val = REG_RD(sc, vals->umac_addr);
|
|
REG_WR(sc, vals->umac_addr, 0);
|
|
mac_stopped = TRUE;
|
|
}
|
|
}
|
|
|
|
if (mac_stopped) {
|
|
DELAY(20000);
|
|
}
|
|
}
|
|
|
|
#define BNX2X_PREV_UNDI_PROD_ADDR(p) (BAR_TSTRORM_INTMEM + 0x1508 + ((p) << 4))
|
|
#define BNX2X_PREV_UNDI_RCQ(val) ((val) & 0xffff)
|
|
#define BNX2X_PREV_UNDI_BD(val) ((val) >> 16 & 0xffff)
|
|
#define BNX2X_PREV_UNDI_PROD(rcq, bd) ((bd) << 16 | (rcq))
|
|
|
|
static void
|
|
bnx2x_prev_unload_undi_inc(struct bnx2x_softc *sc, uint8_t port, uint8_t inc)
|
|
{
|
|
uint16_t rcq, bd;
|
|
uint32_t tmp_reg = REG_RD(sc, BNX2X_PREV_UNDI_PROD_ADDR(port));
|
|
|
|
rcq = BNX2X_PREV_UNDI_RCQ(tmp_reg) + inc;
|
|
bd = BNX2X_PREV_UNDI_BD(tmp_reg) + inc;
|
|
|
|
tmp_reg = BNX2X_PREV_UNDI_PROD(rcq, bd);
|
|
REG_WR(sc, BNX2X_PREV_UNDI_PROD_ADDR(port), tmp_reg);
|
|
}
|
|
|
|
static int bnx2x_prev_unload_common(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t reset_reg, tmp_reg = 0, rc;
|
|
uint8_t prev_undi = FALSE;
|
|
struct bnx2x_mac_vals mac_vals;
|
|
uint32_t timer_count = 1000;
|
|
uint32_t prev_brb;
|
|
|
|
/*
|
|
* It is possible a previous function received 'common' answer,
|
|
* but hasn't loaded yet, therefore creating a scenario of
|
|
* multiple functions receiving 'common' on the same path.
|
|
*/
|
|
memset(&mac_vals, 0, sizeof(mac_vals));
|
|
|
|
if (bnx2x_prev_is_path_marked(sc)) {
|
|
return bnx2x_prev_mcp_done(sc);
|
|
}
|
|
|
|
reset_reg = REG_RD(sc, MISC_REG_RESET_REG_1);
|
|
|
|
/* Reset should be performed after BRB is emptied */
|
|
if (reset_reg & MISC_REGISTERS_RESET_REG_1_RST_BRB1) {
|
|
/* Close the MAC Rx to prevent BRB from filling up */
|
|
bnx2x_prev_unload_close_mac(sc, &mac_vals);
|
|
|
|
/* close LLH filters towards the BRB */
|
|
elink_set_rx_filter(&sc->link_params, 0);
|
|
|
|
/*
|
|
* Check if the UNDI driver was previously loaded.
|
|
* UNDI driver initializes CID offset for normal bell to 0x7
|
|
*/
|
|
if (reset_reg & MISC_REGISTERS_RESET_REG_1_RST_DORQ) {
|
|
tmp_reg = REG_RD(sc, DORQ_REG_NORM_CID_OFST);
|
|
if (tmp_reg == 0x7) {
|
|
PMD_DRV_LOG(DEBUG, "UNDI previously loaded");
|
|
prev_undi = TRUE;
|
|
/* clear the UNDI indication */
|
|
REG_WR(sc, DORQ_REG_NORM_CID_OFST, 0);
|
|
/* clear possible idle check errors */
|
|
REG_RD(sc, NIG_REG_NIG_INT_STS_CLR_0);
|
|
}
|
|
}
|
|
|
|
/* wait until BRB is empty */
|
|
tmp_reg = REG_RD(sc, BRB1_REG_NUM_OF_FULL_BLOCKS);
|
|
while (timer_count) {
|
|
prev_brb = tmp_reg;
|
|
|
|
tmp_reg = REG_RD(sc, BRB1_REG_NUM_OF_FULL_BLOCKS);
|
|
if (!tmp_reg) {
|
|
break;
|
|
}
|
|
|
|
PMD_DRV_LOG(DEBUG, "BRB still has 0x%08x", tmp_reg);
|
|
|
|
/* reset timer as long as BRB actually gets emptied */
|
|
if (prev_brb > tmp_reg) {
|
|
timer_count = 1000;
|
|
} else {
|
|
timer_count--;
|
|
}
|
|
|
|
/* If UNDI resides in memory, manually increment it */
|
|
if (prev_undi) {
|
|
bnx2x_prev_unload_undi_inc(sc, SC_PORT(sc), 1);
|
|
}
|
|
|
|
DELAY(10);
|
|
}
|
|
|
|
if (!timer_count) {
|
|
PMD_DRV_LOG(NOTICE, "Failed to empty BRB");
|
|
}
|
|
}
|
|
|
|
/* No packets are in the pipeline, path is ready for reset */
|
|
bnx2x_reset_common(sc);
|
|
|
|
if (mac_vals.xmac_addr) {
|
|
REG_WR(sc, mac_vals.xmac_addr, mac_vals.xmac_val);
|
|
}
|
|
if (mac_vals.umac_addr) {
|
|
REG_WR(sc, mac_vals.umac_addr, mac_vals.umac_val);
|
|
}
|
|
if (mac_vals.emac_addr) {
|
|
REG_WR(sc, mac_vals.emac_addr, mac_vals.emac_val);
|
|
}
|
|
if (mac_vals.bmac_addr) {
|
|
REG_WR(sc, mac_vals.bmac_addr, mac_vals.bmac_val[0]);
|
|
REG_WR(sc, mac_vals.bmac_addr + 4, mac_vals.bmac_val[1]);
|
|
}
|
|
|
|
rc = bnx2x_prev_mark_path(sc, prev_undi);
|
|
if (rc) {
|
|
bnx2x_prev_mcp_done(sc);
|
|
return rc;
|
|
}
|
|
|
|
return bnx2x_prev_mcp_done(sc);
|
|
}
|
|
|
|
static int bnx2x_prev_unload_uncommon(struct bnx2x_softc *sc)
|
|
{
|
|
int rc;
|
|
|
|
/* Test if previous unload process was already finished for this path */
|
|
if (bnx2x_prev_is_path_marked(sc)) {
|
|
return bnx2x_prev_mcp_done(sc);
|
|
}
|
|
|
|
/*
|
|
* If function has FLR capabilities, and existing FW version matches
|
|
* the one required, then FLR will be sufficient to clean any residue
|
|
* left by previous driver
|
|
*/
|
|
rc = bnx2x_nic_load_analyze_req(sc, FW_MSG_CODE_DRV_LOAD_FUNCTION);
|
|
if (!rc) {
|
|
/* fw version is good */
|
|
rc = bnx2x_do_flr(sc);
|
|
}
|
|
|
|
if (!rc) {
|
|
/* FLR was performed */
|
|
return 0;
|
|
}
|
|
|
|
PMD_DRV_LOG(INFO, "Could not FLR");
|
|
|
|
/* Close the MCP request, return failure */
|
|
rc = bnx2x_prev_mcp_done(sc);
|
|
if (!rc) {
|
|
rc = BNX2X_PREV_WAIT_NEEDED;
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int bnx2x_prev_unload(struct bnx2x_softc *sc)
|
|
{
|
|
int time_counter = 10;
|
|
uint32_t fw, hw_lock_reg, hw_lock_val;
|
|
uint32_t rc = 0;
|
|
|
|
/*
|
|
* Clear HW from errors which may have resulted from an interrupted
|
|
* DMAE transaction.
|
|
*/
|
|
bnx2x_prev_interrupted_dmae(sc);
|
|
|
|
/* Release previously held locks */
|
|
if (SC_FUNC(sc) <= 5)
|
|
hw_lock_reg = (MISC_REG_DRIVER_CONTROL_1 + SC_FUNC(sc) * 8);
|
|
else
|
|
hw_lock_reg =
|
|
(MISC_REG_DRIVER_CONTROL_7 + (SC_FUNC(sc) - 6) * 8);
|
|
|
|
hw_lock_val = (REG_RD(sc, hw_lock_reg));
|
|
if (hw_lock_val) {
|
|
if (hw_lock_val & HW_LOCK_RESOURCE_NVRAM) {
|
|
REG_WR(sc, MCP_REG_MCPR_NVM_SW_ARB,
|
|
(MCPR_NVM_SW_ARB_ARB_REQ_CLR1 << SC_PORT(sc)));
|
|
}
|
|
REG_WR(sc, hw_lock_reg, 0xffffffff);
|
|
}
|
|
|
|
if (MCPR_ACCESS_LOCK_LOCK & REG_RD(sc, MCP_REG_MCPR_ACCESS_LOCK)) {
|
|
REG_WR(sc, MCP_REG_MCPR_ACCESS_LOCK, 0);
|
|
}
|
|
|
|
do {
|
|
/* Lock MCP using an unload request */
|
|
fw = bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS, 0);
|
|
if (!fw) {
|
|
PMD_DRV_LOG(NOTICE, "MCP response failure, aborting");
|
|
rc = -1;
|
|
break;
|
|
}
|
|
|
|
if (fw == FW_MSG_CODE_DRV_UNLOAD_COMMON) {
|
|
rc = bnx2x_prev_unload_common(sc);
|
|
break;
|
|
}
|
|
|
|
/* non-common reply from MCP might require looping */
|
|
rc = bnx2x_prev_unload_uncommon(sc);
|
|
if (rc != BNX2X_PREV_WAIT_NEEDED) {
|
|
break;
|
|
}
|
|
|
|
DELAY(20000);
|
|
} while (--time_counter);
|
|
|
|
if (!time_counter || rc) {
|
|
PMD_DRV_LOG(NOTICE, "Failed to unload previous driver!");
|
|
rc = -1;
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void
|
|
bnx2x_dcbx_set_state(struct bnx2x_softc *sc, uint8_t dcb_on, uint32_t dcbx_enabled)
|
|
{
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
sc->dcb_state = dcb_on;
|
|
sc->dcbx_enabled = dcbx_enabled;
|
|
} else {
|
|
sc->dcb_state = FALSE;
|
|
sc->dcbx_enabled = BNX2X_DCBX_ENABLED_INVALID;
|
|
}
|
|
PMD_DRV_LOG(DEBUG,
|
|
"DCB state [%s:%s]",
|
|
dcb_on ? "ON" : "OFF",
|
|
(dcbx_enabled == BNX2X_DCBX_ENABLED_OFF) ? "user-mode" :
|
|
(dcbx_enabled ==
|
|
BNX2X_DCBX_ENABLED_ON_NEG_OFF) ? "on-chip static"
|
|
: (dcbx_enabled ==
|
|
BNX2X_DCBX_ENABLED_ON_NEG_ON) ?
|
|
"on-chip with negotiation" : "invalid");
|
|
}
|
|
|
|
static int bnx2x_set_qm_cid_count(struct bnx2x_softc *sc)
|
|
{
|
|
int cid_count = BNX2X_L2_MAX_CID(sc);
|
|
|
|
if (CNIC_SUPPORT(sc)) {
|
|
cid_count += CNIC_CID_MAX;
|
|
}
|
|
|
|
return roundup(cid_count, QM_CID_ROUND);
|
|
}
|
|
|
|
static void bnx2x_init_multi_cos(struct bnx2x_softc *sc)
|
|
{
|
|
int pri, cos;
|
|
|
|
uint32_t pri_map = 0;
|
|
|
|
for (pri = 0; pri < BNX2X_MAX_PRIORITY; pri++) {
|
|
cos = ((pri_map & (0xf << (pri * 4))) >> (pri * 4));
|
|
if (cos < sc->max_cos) {
|
|
sc->prio_to_cos[pri] = cos;
|
|
} else {
|
|
PMD_DRV_LOG(WARNING,
|
|
"Invalid COS %d for priority %d "
|
|
"(max COS is %d), setting to 0", cos, pri,
|
|
(sc->max_cos - 1));
|
|
sc->prio_to_cos[pri] = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int bnx2x_pci_get_caps(struct bnx2x_softc *sc)
|
|
{
|
|
struct {
|
|
uint8_t id;
|
|
uint8_t next;
|
|
} pci_cap;
|
|
uint16_t status;
|
|
struct bnx2x_pci_cap *cap;
|
|
|
|
cap = sc->pci_caps = rte_zmalloc("caps", sizeof(struct bnx2x_pci_cap),
|
|
RTE_CACHE_LINE_SIZE);
|
|
if (!cap) {
|
|
PMD_DRV_LOG(NOTICE, "Failed to allocate memory");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
#ifndef __FreeBSD__
|
|
pci_read(sc, PCI_STATUS, &status, 2);
|
|
if (!(status & PCI_STATUS_CAP_LIST)) {
|
|
#else
|
|
pci_read(sc, PCIR_STATUS, &status, 2);
|
|
if (!(status & PCIM_STATUS_CAPPRESENT)) {
|
|
#endif
|
|
PMD_DRV_LOG(NOTICE, "PCIe capability reading failed");
|
|
return -1;
|
|
}
|
|
|
|
#ifndef __FreeBSD__
|
|
pci_read(sc, PCI_CAPABILITY_LIST, &pci_cap.next, 1);
|
|
#else
|
|
pci_read(sc, PCIR_CAP_PTR, &pci_cap.next, 1);
|
|
#endif
|
|
while (pci_cap.next) {
|
|
cap->addr = pci_cap.next & ~3;
|
|
pci_read(sc, pci_cap.next & ~3, &pci_cap, 2);
|
|
if (pci_cap.id == 0xff)
|
|
break;
|
|
cap->id = pci_cap.id;
|
|
cap->type = BNX2X_PCI_CAP;
|
|
cap->next = rte_zmalloc("pci_cap",
|
|
sizeof(struct bnx2x_pci_cap),
|
|
RTE_CACHE_LINE_SIZE);
|
|
if (!cap->next) {
|
|
PMD_DRV_LOG(NOTICE, "Failed to allocate memory");
|
|
return -ENOMEM;
|
|
}
|
|
cap = cap->next;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bnx2x_init_rte(struct bnx2x_softc *sc)
|
|
{
|
|
if (IS_VF(sc)) {
|
|
sc->max_tx_queues = min(BNX2X_VF_MAX_QUEUES_PER_VF,
|
|
sc->igu_sb_cnt);
|
|
sc->max_rx_queues = min(BNX2X_VF_MAX_QUEUES_PER_VF,
|
|
sc->igu_sb_cnt);
|
|
} else {
|
|
sc->max_rx_queues = BNX2X_MAX_RSS_COUNT(sc);
|
|
sc->max_tx_queues = sc->max_rx_queues;
|
|
}
|
|
}
|
|
|
|
#define FW_HEADER_LEN 104
|
|
#define FW_NAME_57711 "/lib/firmware/bnx2x/bnx2x-e1h-7.2.51.0.fw"
|
|
#define FW_NAME_57810 "/lib/firmware/bnx2x/bnx2x-e2-7.2.51.0.fw"
|
|
|
|
void bnx2x_load_firmware(struct bnx2x_softc *sc)
|
|
{
|
|
const char *fwname;
|
|
int f;
|
|
struct stat st;
|
|
|
|
fwname = sc->devinfo.device_id == CHIP_NUM_57711
|
|
? FW_NAME_57711 : FW_NAME_57810;
|
|
f = open(fwname, O_RDONLY);
|
|
if (f < 0) {
|
|
PMD_DRV_LOG(NOTICE, "Can't open firmware file");
|
|
return;
|
|
}
|
|
|
|
if (fstat(f, &st) < 0) {
|
|
PMD_DRV_LOG(NOTICE, "Can't stat firmware file");
|
|
close(f);
|
|
return;
|
|
}
|
|
|
|
sc->firmware = rte_zmalloc("bnx2x_fw", st.st_size, RTE_CACHE_LINE_SIZE);
|
|
if (!sc->firmware) {
|
|
PMD_DRV_LOG(NOTICE, "Can't allocate memory for firmware");
|
|
close(f);
|
|
return;
|
|
}
|
|
|
|
if (read(f, sc->firmware, st.st_size) != st.st_size) {
|
|
PMD_DRV_LOG(NOTICE, "Can't read firmware data");
|
|
close(f);
|
|
return;
|
|
}
|
|
close(f);
|
|
|
|
sc->fw_len = st.st_size;
|
|
if (sc->fw_len < FW_HEADER_LEN) {
|
|
PMD_DRV_LOG(NOTICE, "Invalid fw size: %" PRIu64, sc->fw_len);
|
|
return;
|
|
}
|
|
PMD_DRV_LOG(DEBUG, "fw_len = %" PRIu64, sc->fw_len);
|
|
}
|
|
|
|
static void
|
|
bnx2x_data_to_init_ops(uint8_t * data, struct raw_op *dst, uint32_t len)
|
|
{
|
|
uint32_t *src = (uint32_t *) data;
|
|
uint32_t i, j, tmp;
|
|
|
|
for (i = 0, j = 0; i < len / 8; ++i, j += 2) {
|
|
tmp = rte_be_to_cpu_32(src[j]);
|
|
dst[i].op = (tmp >> 24) & 0xFF;
|
|
dst[i].offset = tmp & 0xFFFFFF;
|
|
dst[i].raw_data = rte_be_to_cpu_32(src[j + 1]);
|
|
}
|
|
}
|
|
|
|
static void
|
|
bnx2x_data_to_init_offsets(uint8_t * data, uint16_t * dst, uint32_t len)
|
|
{
|
|
uint16_t *src = (uint16_t *) data;
|
|
uint32_t i;
|
|
|
|
for (i = 0; i < len / 2; ++i)
|
|
dst[i] = rte_be_to_cpu_16(src[i]);
|
|
}
|
|
|
|
static void bnx2x_data_to_init_data(uint8_t * data, uint32_t * dst, uint32_t len)
|
|
{
|
|
uint32_t *src = (uint32_t *) data;
|
|
uint32_t i;
|
|
|
|
for (i = 0; i < len / 4; ++i)
|
|
dst[i] = rte_be_to_cpu_32(src[i]);
|
|
}
|
|
|
|
static void bnx2x_data_to_iro_array(uint8_t * data, struct iro *dst, uint32_t len)
|
|
{
|
|
uint32_t *src = (uint32_t *) data;
|
|
uint32_t i, j, tmp;
|
|
|
|
for (i = 0, j = 0; i < len / sizeof(struct iro); ++i, ++j) {
|
|
dst[i].base = rte_be_to_cpu_32(src[j++]);
|
|
tmp = rte_be_to_cpu_32(src[j]);
|
|
dst[i].m1 = (tmp >> 16) & 0xFFFF;
|
|
dst[i].m2 = tmp & 0xFFFF;
|
|
++j;
|
|
tmp = rte_be_to_cpu_32(src[j]);
|
|
dst[i].m3 = (tmp >> 16) & 0xFFFF;
|
|
dst[i].size = tmp & 0xFFFF;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Device attach function.
|
|
*
|
|
* Allocates device resources, performs secondary chip identification, and
|
|
* initializes driver instance variables. This function is called from driver
|
|
* load after a successful probe.
|
|
*
|
|
* Returns:
|
|
* 0 = Success, >0 = Failure
|
|
*/
|
|
int bnx2x_attach(struct bnx2x_softc *sc)
|
|
{
|
|
int rc;
|
|
|
|
PMD_DRV_LOG(DEBUG, "Starting attach...");
|
|
|
|
rc = bnx2x_pci_get_caps(sc);
|
|
if (rc) {
|
|
PMD_DRV_LOG(NOTICE, "PCIe caps reading was failed");
|
|
return rc;
|
|
}
|
|
|
|
sc->state = BNX2X_STATE_CLOSED;
|
|
|
|
pci_write_long(sc, PCICFG_GRC_ADDRESS, PCICFG_VENDOR_ID_OFFSET);
|
|
|
|
sc->igu_base_addr = IS_VF(sc) ? PXP_VF_ADDR_IGU_START : BAR_IGU_INTMEM;
|
|
|
|
/* get PCI capabilites */
|
|
bnx2x_probe_pci_caps(sc);
|
|
|
|
if (sc->devinfo.pcie_msix_cap_reg != 0) {
|
|
uint32_t val;
|
|
pci_read(sc,
|
|
(sc->devinfo.pcie_msix_cap_reg + PCIR_MSIX_CTRL), &val,
|
|
2);
|
|
sc->igu_sb_cnt = (val & PCIM_MSIXCTRL_TABLE_SIZE) + 1;
|
|
} else {
|
|
sc->igu_sb_cnt = 1;
|
|
}
|
|
|
|
/* Init RTE stuff */
|
|
bnx2x_init_rte(sc);
|
|
|
|
if (IS_PF(sc)) {
|
|
/* get device info and set params */
|
|
if (bnx2x_get_device_info(sc) != 0) {
|
|
PMD_DRV_LOG(NOTICE, "getting device info");
|
|
return -ENXIO;
|
|
}
|
|
|
|
/* get phy settings from shmem and 'and' against admin settings */
|
|
bnx2x_get_phy_info(sc);
|
|
} else {
|
|
/* Left mac of VF unfilled, PF should set it for VF */
|
|
memset(sc->link_params.mac_addr, 0, ETHER_ADDR_LEN);
|
|
}
|
|
|
|
sc->wol = 0;
|
|
|
|
/* set the default MTU (changed via ifconfig) */
|
|
sc->mtu = ETHER_MTU;
|
|
|
|
bnx2x_set_modes_bitmap(sc);
|
|
|
|
/* need to reset chip if UNDI was active */
|
|
if (IS_PF(sc) && !BNX2X_NOMCP(sc)) {
|
|
/* init fw_seq */
|
|
sc->fw_seq =
|
|
(SHMEM_RD(sc, func_mb[SC_FW_MB_IDX(sc)].drv_mb_header) &
|
|
DRV_MSG_SEQ_NUMBER_MASK);
|
|
bnx2x_prev_unload(sc);
|
|
}
|
|
|
|
bnx2x_dcbx_set_state(sc, FALSE, BNX2X_DCBX_ENABLED_OFF);
|
|
|
|
/* calculate qm_cid_count */
|
|
sc->qm_cid_count = bnx2x_set_qm_cid_count(sc);
|
|
|
|
sc->max_cos = 1;
|
|
bnx2x_init_multi_cos(sc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
bnx2x_igu_ack_sb(struct bnx2x_softc *sc, uint8_t igu_sb_id, uint8_t segment,
|
|
uint16_t index, uint8_t op, uint8_t update)
|
|
{
|
|
uint32_t igu_addr = sc->igu_base_addr;
|
|
igu_addr += (IGU_CMD_INT_ACK_BASE + igu_sb_id) * 8;
|
|
bnx2x_igu_ack_sb_gen(sc, segment, index, op, update, igu_addr);
|
|
}
|
|
|
|
static void
|
|
bnx2x_ack_sb(struct bnx2x_softc *sc, uint8_t igu_sb_id, uint8_t storm,
|
|
uint16_t index, uint8_t op, uint8_t update)
|
|
{
|
|
if (unlikely(sc->devinfo.int_block == INT_BLOCK_HC))
|
|
bnx2x_hc_ack_sb(sc, igu_sb_id, storm, index, op, update);
|
|
else {
|
|
uint8_t segment;
|
|
if (CHIP_INT_MODE_IS_BC(sc)) {
|
|
segment = storm;
|
|
} else if (igu_sb_id != sc->igu_dsb_id) {
|
|
segment = IGU_SEG_ACCESS_DEF;
|
|
} else if (storm == ATTENTION_ID) {
|
|
segment = IGU_SEG_ACCESS_ATTN;
|
|
} else {
|
|
segment = IGU_SEG_ACCESS_DEF;
|
|
}
|
|
bnx2x_igu_ack_sb(sc, igu_sb_id, segment, index, op, update);
|
|
}
|
|
}
|
|
|
|
static void
|
|
bnx2x_igu_clear_sb_gen(struct bnx2x_softc *sc, uint8_t func, uint8_t idu_sb_id,
|
|
uint8_t is_pf)
|
|
{
|
|
uint32_t data, ctl, cnt = 100;
|
|
uint32_t igu_addr_data = IGU_REG_COMMAND_REG_32LSB_DATA;
|
|
uint32_t igu_addr_ctl = IGU_REG_COMMAND_REG_CTRL;
|
|
uint32_t igu_addr_ack = IGU_REG_CSTORM_TYPE_0_SB_CLEANUP +
|
|
(idu_sb_id / 32) * 4;
|
|
uint32_t sb_bit = 1 << (idu_sb_id % 32);
|
|
uint32_t func_encode = func |
|
|
(is_pf ? 1 : 0) << IGU_FID_ENCODE_IS_PF_SHIFT;
|
|
uint32_t addr_encode = IGU_CMD_E2_PROD_UPD_BASE + idu_sb_id;
|
|
|
|
/* Not supported in BC mode */
|
|
if (CHIP_INT_MODE_IS_BC(sc)) {
|
|
return;
|
|
}
|
|
|
|
data = ((IGU_USE_REGISTER_cstorm_type_0_sb_cleanup <<
|
|
IGU_REGULAR_CLEANUP_TYPE_SHIFT) |
|
|
IGU_REGULAR_CLEANUP_SET | IGU_REGULAR_BCLEANUP);
|
|
|
|
ctl = ((addr_encode << IGU_CTRL_REG_ADDRESS_SHIFT) |
|
|
(func_encode << IGU_CTRL_REG_FID_SHIFT) |
|
|
(IGU_CTRL_CMD_TYPE_WR << IGU_CTRL_REG_TYPE_SHIFT));
|
|
|
|
REG_WR(sc, igu_addr_data, data);
|
|
|
|
mb();
|
|
|
|
PMD_DRV_LOG(DEBUG, "write 0x%08x to IGU(via GRC) addr 0x%x",
|
|
ctl, igu_addr_ctl);
|
|
REG_WR(sc, igu_addr_ctl, ctl);
|
|
|
|
mb();
|
|
|
|
/* wait for clean up to finish */
|
|
while (!(REG_RD(sc, igu_addr_ack) & sb_bit) && --cnt) {
|
|
DELAY(20000);
|
|
}
|
|
|
|
if (!(REG_RD(sc, igu_addr_ack) & sb_bit)) {
|
|
PMD_DRV_LOG(DEBUG,
|
|
"Unable to finish IGU cleanup: "
|
|
"idu_sb_id %d offset %d bit %d (cnt %d)",
|
|
idu_sb_id, idu_sb_id / 32, idu_sb_id % 32, cnt);
|
|
}
|
|
}
|
|
|
|
static void bnx2x_igu_clear_sb(struct bnx2x_softc *sc, uint8_t idu_sb_id)
|
|
{
|
|
bnx2x_igu_clear_sb_gen(sc, SC_FUNC(sc), idu_sb_id, TRUE /*PF*/);
|
|
}
|
|
|
|
/*******************/
|
|
/* ECORE CALLBACKS */
|
|
/*******************/
|
|
|
|
static void bnx2x_reset_common(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t val = 0x1400;
|
|
|
|
PMD_INIT_FUNC_TRACE();
|
|
|
|
/* reset_common */
|
|
REG_WR(sc, (GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR),
|
|
0xd3ffff7f);
|
|
|
|
if (CHIP_IS_E3(sc)) {
|
|
val |= MISC_REGISTERS_RESET_REG_2_MSTAT0;
|
|
val |= MISC_REGISTERS_RESET_REG_2_MSTAT1;
|
|
}
|
|
|
|
REG_WR(sc, (GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR), val);
|
|
}
|
|
|
|
static void bnx2x_common_init_phy(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t shmem_base[2];
|
|
uint32_t shmem2_base[2];
|
|
|
|
/* Avoid common init in case MFW supports LFA */
|
|
if (SHMEM2_RD(sc, size) >
|
|
(uint32_t) offsetof(struct shmem2_region,
|
|
lfa_host_addr[SC_PORT(sc)])) {
|
|
return;
|
|
}
|
|
|
|
shmem_base[0] = sc->devinfo.shmem_base;
|
|
shmem2_base[0] = sc->devinfo.shmem2_base;
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
shmem_base[1] = SHMEM2_RD(sc, other_shmem_base_addr);
|
|
shmem2_base[1] = SHMEM2_RD(sc, other_shmem2_base_addr);
|
|
}
|
|
|
|
elink_common_init_phy(sc, shmem_base, shmem2_base,
|
|
sc->devinfo.chip_id, 0);
|
|
}
|
|
|
|
static void bnx2x_pf_disable(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t val = REG_RD(sc, IGU_REG_PF_CONFIGURATION);
|
|
|
|
val &= ~IGU_PF_CONF_FUNC_EN;
|
|
|
|
REG_WR(sc, IGU_REG_PF_CONFIGURATION, val);
|
|
REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0);
|
|
REG_WR(sc, CFC_REG_WEAK_ENABLE_PF, 0);
|
|
}
|
|
|
|
static void bnx2x_init_pxp(struct bnx2x_softc *sc)
|
|
{
|
|
uint16_t devctl;
|
|
int r_order, w_order;
|
|
|
|
devctl = bnx2x_pcie_capability_read(sc, PCIR_EXPRESS_DEVICE_CTL);
|
|
|
|
w_order = ((devctl & PCIM_EXP_CTL_MAX_PAYLOAD) >> 5);
|
|
r_order = ((devctl & PCIM_EXP_CTL_MAX_READ_REQUEST) >> 12);
|
|
|
|
ecore_init_pxp_arb(sc, r_order, w_order);
|
|
}
|
|
|
|
static uint32_t bnx2x_get_pretend_reg(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t base = PXP2_REG_PGL_PRETEND_FUNC_F0;
|
|
uint32_t stride = (PXP2_REG_PGL_PRETEND_FUNC_F1 - base);
|
|
return base + (SC_ABS_FUNC(sc)) * stride;
|
|
}
|
|
|
|
/*
|
|
* Called only on E1H or E2.
|
|
* When pretending to be PF, the pretend value is the function number 0..7.
|
|
* When pretending to be VF, the pretend val is the PF-num:VF-valid:ABS-VFID
|
|
* combination.
|
|
*/
|
|
static int bnx2x_pretend_func(struct bnx2x_softc *sc, uint16_t pretend_func_val)
|
|
{
|
|
uint32_t pretend_reg;
|
|
|
|
if (CHIP_IS_E1H(sc) && (pretend_func_val > E1H_FUNC_MAX))
|
|
return -1;
|
|
|
|
/* get my own pretend register */
|
|
pretend_reg = bnx2x_get_pretend_reg(sc);
|
|
REG_WR(sc, pretend_reg, pretend_func_val);
|
|
REG_RD(sc, pretend_reg);
|
|
return 0;
|
|
}
|
|
|
|
static void bnx2x_setup_fan_failure_detection(struct bnx2x_softc *sc)
|
|
{
|
|
int is_required;
|
|
uint32_t val;
|
|
int port;
|
|
|
|
is_required = 0;
|
|
val = (SHMEM_RD(sc, dev_info.shared_hw_config.config2) &
|
|
SHARED_HW_CFG_FAN_FAILURE_MASK);
|
|
|
|
if (val == SHARED_HW_CFG_FAN_FAILURE_ENABLED) {
|
|
is_required = 1;
|
|
}
|
|
/*
|
|
* The fan failure mechanism is usually related to the PHY type since
|
|
* the power consumption of the board is affected by the PHY. Currently,
|
|
* fan is required for most designs with SFX7101, BNX2X8727 and BNX2X8481.
|
|
*/
|
|
else if (val == SHARED_HW_CFG_FAN_FAILURE_PHY_TYPE) {
|
|
for (port = PORT_0; port < PORT_MAX; port++) {
|
|
is_required |= elink_fan_failure_det_req(sc,
|
|
sc->
|
|
devinfo.shmem_base,
|
|
sc->
|
|
devinfo.shmem2_base,
|
|
port);
|
|
}
|
|
}
|
|
|
|
if (is_required == 0) {
|
|
return;
|
|
}
|
|
|
|
/* Fan failure is indicated by SPIO 5 */
|
|
bnx2x_set_spio(sc, MISC_SPIO_SPIO5, MISC_SPIO_INPUT_HI_Z);
|
|
|
|
/* set to active low mode */
|
|
val = REG_RD(sc, MISC_REG_SPIO_INT);
|
|
val |= (MISC_SPIO_SPIO5 << MISC_SPIO_INT_OLD_SET_POS);
|
|
REG_WR(sc, MISC_REG_SPIO_INT, val);
|
|
|
|
/* enable interrupt to signal the IGU */
|
|
val = REG_RD(sc, MISC_REG_SPIO_EVENT_EN);
|
|
val |= MISC_SPIO_SPIO5;
|
|
REG_WR(sc, MISC_REG_SPIO_EVENT_EN, val);
|
|
}
|
|
|
|
static void bnx2x_enable_blocks_attention(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
|
|
REG_WR(sc, PXP_REG_PXP_INT_MASK_0, 0);
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
REG_WR(sc, PXP_REG_PXP_INT_MASK_1, 0x40);
|
|
} else {
|
|
REG_WR(sc, PXP_REG_PXP_INT_MASK_1, 0);
|
|
}
|
|
REG_WR(sc, DORQ_REG_DORQ_INT_MASK, 0);
|
|
REG_WR(sc, CFC_REG_CFC_INT_MASK, 0);
|
|
/*
|
|
* mask read length error interrupts in brb for parser
|
|
* (parsing unit and 'checksum and crc' unit)
|
|
* these errors are legal (PU reads fixed length and CAC can cause
|
|
* read length error on truncated packets)
|
|
*/
|
|
REG_WR(sc, BRB1_REG_BRB1_INT_MASK, 0xFC00);
|
|
REG_WR(sc, QM_REG_QM_INT_MASK, 0);
|
|
REG_WR(sc, TM_REG_TM_INT_MASK, 0);
|
|
REG_WR(sc, XSDM_REG_XSDM_INT_MASK_0, 0);
|
|
REG_WR(sc, XSDM_REG_XSDM_INT_MASK_1, 0);
|
|
REG_WR(sc, XCM_REG_XCM_INT_MASK, 0);
|
|
/* REG_WR(sc, XSEM_REG_XSEM_INT_MASK_0, 0); */
|
|
/* REG_WR(sc, XSEM_REG_XSEM_INT_MASK_1, 0); */
|
|
REG_WR(sc, USDM_REG_USDM_INT_MASK_0, 0);
|
|
REG_WR(sc, USDM_REG_USDM_INT_MASK_1, 0);
|
|
REG_WR(sc, UCM_REG_UCM_INT_MASK, 0);
|
|
/* REG_WR(sc, USEM_REG_USEM_INT_MASK_0, 0); */
|
|
/* REG_WR(sc, USEM_REG_USEM_INT_MASK_1, 0); */
|
|
REG_WR(sc, GRCBASE_UPB + PB_REG_PB_INT_MASK, 0);
|
|
REG_WR(sc, CSDM_REG_CSDM_INT_MASK_0, 0);
|
|
REG_WR(sc, CSDM_REG_CSDM_INT_MASK_1, 0);
|
|
REG_WR(sc, CCM_REG_CCM_INT_MASK, 0);
|
|
/* REG_WR(sc, CSEM_REG_CSEM_INT_MASK_0, 0); */
|
|
/* REG_WR(sc, CSEM_REG_CSEM_INT_MASK_1, 0); */
|
|
|
|
val = (PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_AFT |
|
|
PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_OF |
|
|
PXP2_PXP2_INT_MASK_0_REG_PGL_PCIE_ATTN);
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
val |= (PXP2_PXP2_INT_MASK_0_REG_PGL_READ_BLOCKED |
|
|
PXP2_PXP2_INT_MASK_0_REG_PGL_WRITE_BLOCKED);
|
|
}
|
|
REG_WR(sc, PXP2_REG_PXP2_INT_MASK_0, val);
|
|
|
|
REG_WR(sc, TSDM_REG_TSDM_INT_MASK_0, 0);
|
|
REG_WR(sc, TSDM_REG_TSDM_INT_MASK_1, 0);
|
|
REG_WR(sc, TCM_REG_TCM_INT_MASK, 0);
|
|
/* REG_WR(sc, TSEM_REG_TSEM_INT_MASK_0, 0); */
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
/* enable VFC attentions: bits 11 and 12, bits 31:13 reserved */
|
|
REG_WR(sc, TSEM_REG_TSEM_INT_MASK_1, 0x07ff);
|
|
}
|
|
|
|
REG_WR(sc, CDU_REG_CDU_INT_MASK, 0);
|
|
REG_WR(sc, DMAE_REG_DMAE_INT_MASK, 0);
|
|
/* REG_WR(sc, MISC_REG_MISC_INT_MASK, 0); */
|
|
REG_WR(sc, PBF_REG_PBF_INT_MASK, 0x18); /* bit 3,4 masked */
|
|
}
|
|
|
|
/**
|
|
* bnx2x_init_hw_common - initialize the HW at the COMMON phase.
|
|
*
|
|
* @sc: driver handle
|
|
*/
|
|
static int bnx2x_init_hw_common(struct bnx2x_softc *sc)
|
|
{
|
|
uint8_t abs_func_id;
|
|
uint32_t val;
|
|
|
|
PMD_DRV_LOG(DEBUG, "starting common init for func %d", SC_ABS_FUNC(sc));
|
|
|
|
/*
|
|
* take the RESET lock to protect undi_unload flow from accessing
|
|
* registers while we are resetting the chip
|
|
*/
|
|
bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RESET);
|
|
|
|
bnx2x_reset_common(sc);
|
|
|
|
REG_WR(sc, (GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET), 0xffffffff);
|
|
|
|
val = 0xfffc;
|
|
if (CHIP_IS_E3(sc)) {
|
|
val |= MISC_REGISTERS_RESET_REG_2_MSTAT0;
|
|
val |= MISC_REGISTERS_RESET_REG_2_MSTAT1;
|
|
}
|
|
|
|
REG_WR(sc, (GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET), val);
|
|
|
|
bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RESET);
|
|
|
|
ecore_init_block(sc, BLOCK_MISC, PHASE_COMMON);
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
/*
|
|
* 4-port mode or 2-port mode we need to turn off master-enable for
|
|
* everyone. After that we turn it back on for self. So, we disregard
|
|
* multi-function, and always disable all functions on the given path,
|
|
* this means 0,2,4,6 for path 0 and 1,3,5,7 for path 1
|
|
*/
|
|
for (abs_func_id = SC_PATH(sc);
|
|
abs_func_id < (E2_FUNC_MAX * 2); abs_func_id += 2) {
|
|
if (abs_func_id == SC_ABS_FUNC(sc)) {
|
|
REG_WR(sc,
|
|
PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER,
|
|
1);
|
|
continue;
|
|
}
|
|
|
|
bnx2x_pretend_func(sc, abs_func_id);
|
|
|
|
/* clear pf enable */
|
|
bnx2x_pf_disable(sc);
|
|
|
|
bnx2x_pretend_func(sc, SC_ABS_FUNC(sc));
|
|
}
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_PXP, PHASE_COMMON);
|
|
|
|
ecore_init_block(sc, BLOCK_PXP2, PHASE_COMMON);
|
|
bnx2x_init_pxp(sc);
|
|
|
|
#ifdef __BIG_ENDIAN
|
|
REG_WR(sc, PXP2_REG_RQ_QM_ENDIAN_M, 1);
|
|
REG_WR(sc, PXP2_REG_RQ_TM_ENDIAN_M, 1);
|
|
REG_WR(sc, PXP2_REG_RQ_SRC_ENDIAN_M, 1);
|
|
REG_WR(sc, PXP2_REG_RQ_CDU_ENDIAN_M, 1);
|
|
REG_WR(sc, PXP2_REG_RQ_DBG_ENDIAN_M, 1);
|
|
/* make sure this value is 0 */
|
|
REG_WR(sc, PXP2_REG_RQ_HC_ENDIAN_M, 0);
|
|
|
|
//REG_WR(sc, PXP2_REG_RD_PBF_SWAP_MODE, 1);
|
|
REG_WR(sc, PXP2_REG_RD_QM_SWAP_MODE, 1);
|
|
REG_WR(sc, PXP2_REG_RD_TM_SWAP_MODE, 1);
|
|
REG_WR(sc, PXP2_REG_RD_SRC_SWAP_MODE, 1);
|
|
REG_WR(sc, PXP2_REG_RD_CDURD_SWAP_MODE, 1);
|
|
#endif
|
|
|
|
ecore_ilt_init_page_size(sc, INITOP_SET);
|
|
|
|
if (CHIP_REV_IS_FPGA(sc) && CHIP_IS_E1H(sc)) {
|
|
REG_WR(sc, PXP2_REG_PGL_TAGS_LIMIT, 0x1);
|
|
}
|
|
|
|
/* let the HW do it's magic... */
|
|
DELAY(100000);
|
|
|
|
/* finish PXP init */
|
|
|
|
val = REG_RD(sc, PXP2_REG_RQ_CFG_DONE);
|
|
if (val != 1) {
|
|
PMD_DRV_LOG(NOTICE, "PXP2 CFG failed");
|
|
return -1;
|
|
}
|
|
val = REG_RD(sc, PXP2_REG_RD_INIT_DONE);
|
|
if (val != 1) {
|
|
PMD_DRV_LOG(NOTICE, "PXP2 RD_INIT failed");
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* Timer bug workaround for E2 only. We need to set the entire ILT to have
|
|
* entries with value "0" and valid bit on. This needs to be done by the
|
|
* first PF that is loaded in a path (i.e. common phase)
|
|
*/
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
/*
|
|
* In E2 there is a bug in the timers block that can cause function 6 / 7
|
|
* (i.e. vnic3) to start even if it is marked as "scan-off".
|
|
* This occurs when a different function (func2,3) is being marked
|
|
* as "scan-off". Real-life scenario for example: if a driver is being
|
|
* load-unloaded while func6,7 are down. This will cause the timer to access
|
|
* the ilt, translate to a logical address and send a request to read/write.
|
|
* Since the ilt for the function that is down is not valid, this will cause
|
|
* a translation error which is unrecoverable.
|
|
* The Workaround is intended to make sure that when this happens nothing
|
|
* fatal will occur. The workaround:
|
|
* 1. First PF driver which loads on a path will:
|
|
* a. After taking the chip out of reset, by using pretend,
|
|
* it will write "0" to the following registers of
|
|
* the other vnics.
|
|
* REG_WR(pdev, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0);
|
|
* REG_WR(pdev, CFC_REG_WEAK_ENABLE_PF,0);
|
|
* REG_WR(pdev, CFC_REG_STRONG_ENABLE_PF,0);
|
|
* And for itself it will write '1' to
|
|
* PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER to enable
|
|
* dmae-operations (writing to pram for example.)
|
|
* note: can be done for only function 6,7 but cleaner this
|
|
* way.
|
|
* b. Write zero+valid to the entire ILT.
|
|
* c. Init the first_timers_ilt_entry, last_timers_ilt_entry of
|
|
* VNIC3 (of that port). The range allocated will be the
|
|
* entire ILT. This is needed to prevent ILT range error.
|
|
* 2. Any PF driver load flow:
|
|
* a. ILT update with the physical addresses of the allocated
|
|
* logical pages.
|
|
* b. Wait 20msec. - note that this timeout is needed to make
|
|
* sure there are no requests in one of the PXP internal
|
|
* queues with "old" ILT addresses.
|
|
* c. PF enable in the PGLC.
|
|
* d. Clear the was_error of the PF in the PGLC. (could have
|
|
* occurred while driver was down)
|
|
* e. PF enable in the CFC (WEAK + STRONG)
|
|
* f. Timers scan enable
|
|
* 3. PF driver unload flow:
|
|
* a. Clear the Timers scan_en.
|
|
* b. Polling for scan_on=0 for that PF.
|
|
* c. Clear the PF enable bit in the PXP.
|
|
* d. Clear the PF enable in the CFC (WEAK + STRONG)
|
|
* e. Write zero+valid to all ILT entries (The valid bit must
|
|
* stay set)
|
|
* f. If this is VNIC 3 of a port then also init
|
|
* first_timers_ilt_entry to zero and last_timers_ilt_entry
|
|
* to the last enrty in the ILT.
|
|
*
|
|
* Notes:
|
|
* Currently the PF error in the PGLC is non recoverable.
|
|
* In the future the there will be a recovery routine for this error.
|
|
* Currently attention is masked.
|
|
* Having an MCP lock on the load/unload process does not guarantee that
|
|
* there is no Timer disable during Func6/7 enable. This is because the
|
|
* Timers scan is currently being cleared by the MCP on FLR.
|
|
* Step 2.d can be done only for PF6/7 and the driver can also check if
|
|
* there is error before clearing it. But the flow above is simpler and
|
|
* more general.
|
|
* All ILT entries are written by zero+valid and not just PF6/7
|
|
* ILT entries since in the future the ILT entries allocation for
|
|
* PF-s might be dynamic.
|
|
*/
|
|
struct ilt_client_info ilt_cli;
|
|
struct ecore_ilt ilt;
|
|
|
|
memset(&ilt_cli, 0, sizeof(struct ilt_client_info));
|
|
memset(&ilt, 0, sizeof(struct ecore_ilt));
|
|
|
|
/* initialize dummy TM client */
|
|
ilt_cli.start = 0;
|
|
ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1;
|
|
ilt_cli.client_num = ILT_CLIENT_TM;
|
|
|
|
/*
|
|
* Step 1: set zeroes to all ilt page entries with valid bit on
|
|
* Step 2: set the timers first/last ilt entry to point
|
|
* to the entire range to prevent ILT range error for 3rd/4th
|
|
* vnic (this code assumes existence of the vnic)
|
|
*
|
|
* both steps performed by call to ecore_ilt_client_init_op()
|
|
* with dummy TM client
|
|
*
|
|
* we must use pretend since PXP2_REG_RQ_##blk##_FIRST_ILT
|
|
* and his brother are split registers
|
|
*/
|
|
|
|
bnx2x_pretend_func(sc, (SC_PATH(sc) + 6));
|
|
ecore_ilt_client_init_op_ilt(sc, &ilt, &ilt_cli, INITOP_CLEAR);
|
|
bnx2x_pretend_func(sc, SC_ABS_FUNC(sc));
|
|
|
|
REG_WR(sc, PXP2_REG_RQ_DRAM_ALIGN, BNX2X_PXP_DRAM_ALIGN);
|
|
REG_WR(sc, PXP2_REG_RQ_DRAM_ALIGN_RD, BNX2X_PXP_DRAM_ALIGN);
|
|
REG_WR(sc, PXP2_REG_RQ_DRAM_ALIGN_SEL, 1);
|
|
}
|
|
|
|
REG_WR(sc, PXP2_REG_RQ_DISABLE_INPUTS, 0);
|
|
REG_WR(sc, PXP2_REG_RD_DISABLE_INPUTS, 0);
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
int factor = 0;
|
|
|
|
ecore_init_block(sc, BLOCK_PGLUE_B, PHASE_COMMON);
|
|
ecore_init_block(sc, BLOCK_ATC, PHASE_COMMON);
|
|
|
|
/* let the HW do it's magic... */
|
|
do {
|
|
DELAY(200000);
|
|
val = REG_RD(sc, ATC_REG_ATC_INIT_DONE);
|
|
} while (factor-- && (val != 1));
|
|
|
|
if (val != 1) {
|
|
PMD_DRV_LOG(NOTICE, "ATC_INIT failed");
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_DMAE, PHASE_COMMON);
|
|
|
|
/* clean the DMAE memory */
|
|
sc->dmae_ready = 1;
|
|
ecore_init_fill(sc, TSEM_REG_PRAM, 0, 8);
|
|
|
|
ecore_init_block(sc, BLOCK_TCM, PHASE_COMMON);
|
|
|
|
ecore_init_block(sc, BLOCK_UCM, PHASE_COMMON);
|
|
|
|
ecore_init_block(sc, BLOCK_CCM, PHASE_COMMON);
|
|
|
|
ecore_init_block(sc, BLOCK_XCM, PHASE_COMMON);
|
|
|
|
bnx2x_read_dmae(sc, XSEM_REG_PASSIVE_BUFFER, 3);
|
|
bnx2x_read_dmae(sc, CSEM_REG_PASSIVE_BUFFER, 3);
|
|
bnx2x_read_dmae(sc, TSEM_REG_PASSIVE_BUFFER, 3);
|
|
bnx2x_read_dmae(sc, USEM_REG_PASSIVE_BUFFER, 3);
|
|
|
|
ecore_init_block(sc, BLOCK_QM, PHASE_COMMON);
|
|
|
|
/* QM queues pointers table */
|
|
ecore_qm_init_ptr_table(sc, sc->qm_cid_count, INITOP_SET);
|
|
|
|
/* soft reset pulse */
|
|
REG_WR(sc, QM_REG_SOFT_RESET, 1);
|
|
REG_WR(sc, QM_REG_SOFT_RESET, 0);
|
|
|
|
if (CNIC_SUPPORT(sc))
|
|
ecore_init_block(sc, BLOCK_TM, PHASE_COMMON);
|
|
|
|
ecore_init_block(sc, BLOCK_DORQ, PHASE_COMMON);
|
|
REG_WR(sc, DORQ_REG_DPM_CID_OFST, BNX2X_DB_SHIFT);
|
|
|
|
if (!CHIP_REV_IS_SLOW(sc)) {
|
|
/* enable hw interrupt from doorbell Q */
|
|
REG_WR(sc, DORQ_REG_DORQ_INT_MASK, 0);
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_BRB1, PHASE_COMMON);
|
|
|
|
ecore_init_block(sc, BLOCK_PRS, PHASE_COMMON);
|
|
REG_WR(sc, PRS_REG_A_PRSU_20, 0xf);
|
|
REG_WR(sc, PRS_REG_E1HOV_MODE, sc->devinfo.mf_info.path_has_ovlan);
|
|
|
|
if (!CHIP_IS_E1x(sc) && !CHIP_IS_E3B0(sc)) {
|
|
if (IS_MF_AFEX(sc)) {
|
|
/*
|
|
* configure that AFEX and VLAN headers must be
|
|
* received in AFEX mode
|
|
*/
|
|
REG_WR(sc, PRS_REG_HDRS_AFTER_BASIC, 0xE);
|
|
REG_WR(sc, PRS_REG_MUST_HAVE_HDRS, 0xA);
|
|
REG_WR(sc, PRS_REG_HDRS_AFTER_TAG_0, 0x6);
|
|
REG_WR(sc, PRS_REG_TAG_ETHERTYPE_0, 0x8926);
|
|
REG_WR(sc, PRS_REG_TAG_LEN_0, 0x4);
|
|
} else {
|
|
/*
|
|
* Bit-map indicating which L2 hdrs may appear
|
|
* after the basic Ethernet header
|
|
*/
|
|
REG_WR(sc, PRS_REG_HDRS_AFTER_BASIC,
|
|
sc->devinfo.mf_info.path_has_ovlan ? 7 : 6);
|
|
}
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_TSDM, PHASE_COMMON);
|
|
ecore_init_block(sc, BLOCK_CSDM, PHASE_COMMON);
|
|
ecore_init_block(sc, BLOCK_USDM, PHASE_COMMON);
|
|
ecore_init_block(sc, BLOCK_XSDM, PHASE_COMMON);
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
/* reset VFC memories */
|
|
REG_WR(sc, TSEM_REG_FAST_MEMORY + VFC_REG_MEMORIES_RST,
|
|
VFC_MEMORIES_RST_REG_CAM_RST |
|
|
VFC_MEMORIES_RST_REG_RAM_RST);
|
|
REG_WR(sc, XSEM_REG_FAST_MEMORY + VFC_REG_MEMORIES_RST,
|
|
VFC_MEMORIES_RST_REG_CAM_RST |
|
|
VFC_MEMORIES_RST_REG_RAM_RST);
|
|
|
|
DELAY(20000);
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_TSEM, PHASE_COMMON);
|
|
ecore_init_block(sc, BLOCK_USEM, PHASE_COMMON);
|
|
ecore_init_block(sc, BLOCK_CSEM, PHASE_COMMON);
|
|
ecore_init_block(sc, BLOCK_XSEM, PHASE_COMMON);
|
|
|
|
/* sync semi rtc */
|
|
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 0x80000000);
|
|
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x80000000);
|
|
|
|
ecore_init_block(sc, BLOCK_UPB, PHASE_COMMON);
|
|
ecore_init_block(sc, BLOCK_XPB, PHASE_COMMON);
|
|
ecore_init_block(sc, BLOCK_PBF, PHASE_COMMON);
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
if (IS_MF_AFEX(sc)) {
|
|
/*
|
|
* configure that AFEX and VLAN headers must be
|
|
* sent in AFEX mode
|
|
*/
|
|
REG_WR(sc, PBF_REG_HDRS_AFTER_BASIC, 0xE);
|
|
REG_WR(sc, PBF_REG_MUST_HAVE_HDRS, 0xA);
|
|
REG_WR(sc, PBF_REG_HDRS_AFTER_TAG_0, 0x6);
|
|
REG_WR(sc, PBF_REG_TAG_ETHERTYPE_0, 0x8926);
|
|
REG_WR(sc, PBF_REG_TAG_LEN_0, 0x4);
|
|
} else {
|
|
REG_WR(sc, PBF_REG_HDRS_AFTER_BASIC,
|
|
sc->devinfo.mf_info.path_has_ovlan ? 7 : 6);
|
|
}
|
|
}
|
|
|
|
REG_WR(sc, SRC_REG_SOFT_RST, 1);
|
|
|
|
ecore_init_block(sc, BLOCK_SRC, PHASE_COMMON);
|
|
|
|
if (CNIC_SUPPORT(sc)) {
|
|
REG_WR(sc, SRC_REG_KEYSEARCH_0, 0x63285672);
|
|
REG_WR(sc, SRC_REG_KEYSEARCH_1, 0x24b8f2cc);
|
|
REG_WR(sc, SRC_REG_KEYSEARCH_2, 0x223aef9b);
|
|
REG_WR(sc, SRC_REG_KEYSEARCH_3, 0x26001e3a);
|
|
REG_WR(sc, SRC_REG_KEYSEARCH_4, 0x7ae91116);
|
|
REG_WR(sc, SRC_REG_KEYSEARCH_5, 0x5ce5230b);
|
|
REG_WR(sc, SRC_REG_KEYSEARCH_6, 0x298d8adf);
|
|
REG_WR(sc, SRC_REG_KEYSEARCH_7, 0x6eb0ff09);
|
|
REG_WR(sc, SRC_REG_KEYSEARCH_8, 0x1830f82f);
|
|
REG_WR(sc, SRC_REG_KEYSEARCH_9, 0x01e46be7);
|
|
}
|
|
REG_WR(sc, SRC_REG_SOFT_RST, 0);
|
|
|
|
if (sizeof(union cdu_context) != 1024) {
|
|
/* we currently assume that a context is 1024 bytes */
|
|
PMD_DRV_LOG(NOTICE,
|
|
"please adjust the size of cdu_context(%ld)",
|
|
(long)sizeof(union cdu_context));
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_CDU, PHASE_COMMON);
|
|
val = (4 << 24) + (0 << 12) + 1024;
|
|
REG_WR(sc, CDU_REG_CDU_GLOBAL_PARAMS, val);
|
|
|
|
ecore_init_block(sc, BLOCK_CFC, PHASE_COMMON);
|
|
|
|
REG_WR(sc, CFC_REG_INIT_REG, 0x7FF);
|
|
/* enable context validation interrupt from CFC */
|
|
REG_WR(sc, CFC_REG_CFC_INT_MASK, 0);
|
|
|
|
/* set the thresholds to prevent CFC/CDU race */
|
|
REG_WR(sc, CFC_REG_DEBUG0, 0x20020000);
|
|
ecore_init_block(sc, BLOCK_HC, PHASE_COMMON);
|
|
|
|
if (!CHIP_IS_E1x(sc) && BNX2X_NOMCP(sc)) {
|
|
REG_WR(sc, IGU_REG_RESET_MEMORIES, 0x36);
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_IGU, PHASE_COMMON);
|
|
ecore_init_block(sc, BLOCK_MISC_AEU, PHASE_COMMON);
|
|
|
|
/* Reset PCIE errors for debug */
|
|
REG_WR(sc, 0x2814, 0xffffffff);
|
|
REG_WR(sc, 0x3820, 0xffffffff);
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
REG_WR(sc, PCICFG_OFFSET + PXPCS_TL_CONTROL_5,
|
|
(PXPCS_TL_CONTROL_5_ERR_UNSPPORT1 |
|
|
PXPCS_TL_CONTROL_5_ERR_UNSPPORT));
|
|
REG_WR(sc, PCICFG_OFFSET + PXPCS_TL_FUNC345_STAT,
|
|
(PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT4 |
|
|
PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT3 |
|
|
PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT2));
|
|
REG_WR(sc, PCICFG_OFFSET + PXPCS_TL_FUNC678_STAT,
|
|
(PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT7 |
|
|
PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT6 |
|
|
PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT5));
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_NIG, PHASE_COMMON);
|
|
|
|
/* in E3 this done in per-port section */
|
|
if (!CHIP_IS_E3(sc))
|
|
REG_WR(sc, NIG_REG_LLH_MF_MODE, IS_MF(sc));
|
|
|
|
if (CHIP_IS_E1H(sc)) {
|
|
/* not applicable for E2 (and above ...) */
|
|
REG_WR(sc, NIG_REG_LLH_E1HOV_MODE, IS_MF_SD(sc));
|
|
}
|
|
|
|
if (CHIP_REV_IS_SLOW(sc)) {
|
|
DELAY(200000);
|
|
}
|
|
|
|
/* finish CFC init */
|
|
val = reg_poll(sc, CFC_REG_LL_INIT_DONE, 1, 100, 10);
|
|
if (val != 1) {
|
|
PMD_DRV_LOG(NOTICE, "CFC LL_INIT failed");
|
|
return -1;
|
|
}
|
|
val = reg_poll(sc, CFC_REG_AC_INIT_DONE, 1, 100, 10);
|
|
if (val != 1) {
|
|
PMD_DRV_LOG(NOTICE, "CFC AC_INIT failed");
|
|
return -1;
|
|
}
|
|
val = reg_poll(sc, CFC_REG_CAM_INIT_DONE, 1, 100, 10);
|
|
if (val != 1) {
|
|
PMD_DRV_LOG(NOTICE, "CFC CAM_INIT failed");
|
|
return -1;
|
|
}
|
|
REG_WR(sc, CFC_REG_DEBUG0, 0);
|
|
|
|
bnx2x_setup_fan_failure_detection(sc);
|
|
|
|
/* clear PXP2 attentions */
|
|
REG_RD(sc, PXP2_REG_PXP2_INT_STS_CLR_0);
|
|
|
|
bnx2x_enable_blocks_attention(sc);
|
|
|
|
if (!CHIP_REV_IS_SLOW(sc)) {
|
|
ecore_enable_blocks_parity(sc);
|
|
}
|
|
|
|
if (!BNX2X_NOMCP(sc)) {
|
|
if (CHIP_IS_E1x(sc)) {
|
|
bnx2x_common_init_phy(sc);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* bnx2x_init_hw_common_chip - init HW at the COMMON_CHIP phase.
|
|
*
|
|
* @sc: driver handle
|
|
*/
|
|
static int bnx2x_init_hw_common_chip(struct bnx2x_softc *sc)
|
|
{
|
|
int rc = bnx2x_init_hw_common(sc);
|
|
|
|
if (rc) {
|
|
return rc;
|
|
}
|
|
|
|
/* In E2 2-PORT mode, same ext phy is used for the two paths */
|
|
if (!BNX2X_NOMCP(sc)) {
|
|
bnx2x_common_init_phy(sc);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_init_hw_port(struct bnx2x_softc *sc)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
int init_phase = port ? PHASE_PORT1 : PHASE_PORT0;
|
|
uint32_t low, high;
|
|
uint32_t val;
|
|
|
|
PMD_DRV_LOG(DEBUG, "starting port init for port %d", port);
|
|
|
|
REG_WR(sc, NIG_REG_MASK_INTERRUPT_PORT0 + port * 4, 0);
|
|
|
|
ecore_init_block(sc, BLOCK_MISC, init_phase);
|
|
ecore_init_block(sc, BLOCK_PXP, init_phase);
|
|
ecore_init_block(sc, BLOCK_PXP2, init_phase);
|
|
|
|
/*
|
|
* Timers bug workaround: disables the pf_master bit in pglue at
|
|
* common phase, we need to enable it here before any dmae access are
|
|
* attempted. Therefore we manually added the enable-master to the
|
|
* port phase (it also happens in the function phase)
|
|
*/
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1);
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_ATC, init_phase);
|
|
ecore_init_block(sc, BLOCK_DMAE, init_phase);
|
|
ecore_init_block(sc, BLOCK_PGLUE_B, init_phase);
|
|
ecore_init_block(sc, BLOCK_QM, init_phase);
|
|
|
|
ecore_init_block(sc, BLOCK_TCM, init_phase);
|
|
ecore_init_block(sc, BLOCK_UCM, init_phase);
|
|
ecore_init_block(sc, BLOCK_CCM, init_phase);
|
|
ecore_init_block(sc, BLOCK_XCM, init_phase);
|
|
|
|
/* QM cid (connection) count */
|
|
ecore_qm_init_cid_count(sc, sc->qm_cid_count, INITOP_SET);
|
|
|
|
if (CNIC_SUPPORT(sc)) {
|
|
ecore_init_block(sc, BLOCK_TM, init_phase);
|
|
REG_WR(sc, TM_REG_LIN0_SCAN_TIME + port * 4, 20);
|
|
REG_WR(sc, TM_REG_LIN0_MAX_ACTIVE_CID + port * 4, 31);
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_DORQ, init_phase);
|
|
|
|
ecore_init_block(sc, BLOCK_BRB1, init_phase);
|
|
|
|
if (CHIP_IS_E1H(sc)) {
|
|
if (IS_MF(sc)) {
|
|
low = (BNX2X_ONE_PORT(sc) ? 160 : 246);
|
|
} else if (sc->mtu > 4096) {
|
|
if (BNX2X_ONE_PORT(sc)) {
|
|
low = 160;
|
|
} else {
|
|
val = sc->mtu;
|
|
/* (24*1024 + val*4)/256 */
|
|
low = (96 + (val / 64) + ((val % 64) ? 1 : 0));
|
|
}
|
|
} else {
|
|
low = (BNX2X_ONE_PORT(sc) ? 80 : 160);
|
|
}
|
|
high = (low + 56); /* 14*1024/256 */
|
|
REG_WR(sc, BRB1_REG_PAUSE_LOW_THRESHOLD_0 + port * 4, low);
|
|
REG_WR(sc, BRB1_REG_PAUSE_HIGH_THRESHOLD_0 + port * 4, high);
|
|
}
|
|
|
|
if (CHIP_IS_MODE_4_PORT(sc)) {
|
|
REG_WR(sc, SC_PORT(sc) ?
|
|
BRB1_REG_MAC_GUARANTIED_1 :
|
|
BRB1_REG_MAC_GUARANTIED_0, 40);
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_PRS, init_phase);
|
|
if (CHIP_IS_E3B0(sc)) {
|
|
if (IS_MF_AFEX(sc)) {
|
|
/* configure headers for AFEX mode */
|
|
if (SC_PORT(sc)) {
|
|
REG_WR(sc, PRS_REG_HDRS_AFTER_BASIC_PORT_1,
|
|
0xE);
|
|
REG_WR(sc, PRS_REG_HDRS_AFTER_TAG_0_PORT_1,
|
|
0x6);
|
|
REG_WR(sc, PRS_REG_MUST_HAVE_HDRS_PORT_1, 0xA);
|
|
} else {
|
|
REG_WR(sc, PRS_REG_HDRS_AFTER_BASIC_PORT_0,
|
|
0xE);
|
|
REG_WR(sc, PRS_REG_HDRS_AFTER_TAG_0_PORT_0,
|
|
0x6);
|
|
REG_WR(sc, PRS_REG_MUST_HAVE_HDRS_PORT_0, 0xA);
|
|
}
|
|
} else {
|
|
/* Ovlan exists only if we are in multi-function +
|
|
* switch-dependent mode, in switch-independent there
|
|
* is no ovlan headers
|
|
*/
|
|
REG_WR(sc, SC_PORT(sc) ?
|
|
PRS_REG_HDRS_AFTER_BASIC_PORT_1 :
|
|
PRS_REG_HDRS_AFTER_BASIC_PORT_0,
|
|
(sc->devinfo.mf_info.path_has_ovlan ? 7 : 6));
|
|
}
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_TSDM, init_phase);
|
|
ecore_init_block(sc, BLOCK_CSDM, init_phase);
|
|
ecore_init_block(sc, BLOCK_USDM, init_phase);
|
|
ecore_init_block(sc, BLOCK_XSDM, init_phase);
|
|
|
|
ecore_init_block(sc, BLOCK_TSEM, init_phase);
|
|
ecore_init_block(sc, BLOCK_USEM, init_phase);
|
|
ecore_init_block(sc, BLOCK_CSEM, init_phase);
|
|
ecore_init_block(sc, BLOCK_XSEM, init_phase);
|
|
|
|
ecore_init_block(sc, BLOCK_UPB, init_phase);
|
|
ecore_init_block(sc, BLOCK_XPB, init_phase);
|
|
|
|
ecore_init_block(sc, BLOCK_PBF, init_phase);
|
|
|
|
if (CHIP_IS_E1x(sc)) {
|
|
/* configure PBF to work without PAUSE mtu 9000 */
|
|
REG_WR(sc, PBF_REG_P0_PAUSE_ENABLE + port * 4, 0);
|
|
|
|
/* update threshold */
|
|
REG_WR(sc, PBF_REG_P0_ARB_THRSH + port * 4, (9040 / 16));
|
|
/* update init credit */
|
|
REG_WR(sc, PBF_REG_P0_INIT_CRD + port * 4,
|
|
(9040 / 16) + 553 - 22);
|
|
|
|
/* probe changes */
|
|
REG_WR(sc, PBF_REG_INIT_P0 + port * 4, 1);
|
|
DELAY(50);
|
|
REG_WR(sc, PBF_REG_INIT_P0 + port * 4, 0);
|
|
}
|
|
|
|
if (CNIC_SUPPORT(sc)) {
|
|
ecore_init_block(sc, BLOCK_SRC, init_phase);
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_CDU, init_phase);
|
|
ecore_init_block(sc, BLOCK_CFC, init_phase);
|
|
ecore_init_block(sc, BLOCK_HC, init_phase);
|
|
ecore_init_block(sc, BLOCK_IGU, init_phase);
|
|
ecore_init_block(sc, BLOCK_MISC_AEU, init_phase);
|
|
/* init aeu_mask_attn_func_0/1:
|
|
* - SF mode: bits 3-7 are masked. only bits 0-2 are in use
|
|
* - MF mode: bit 3 is masked. bits 0-2 are in use as in SF
|
|
* bits 4-7 are used for "per vn group attention" */
|
|
val = IS_MF(sc) ? 0xF7 : 0x7;
|
|
val |= 0x10;
|
|
REG_WR(sc, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port * 4, val);
|
|
|
|
ecore_init_block(sc, BLOCK_NIG, init_phase);
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
/* Bit-map indicating which L2 hdrs may appear after the
|
|
* basic Ethernet header
|
|
*/
|
|
if (IS_MF_AFEX(sc)) {
|
|
REG_WR(sc, SC_PORT(sc) ?
|
|
NIG_REG_P1_HDRS_AFTER_BASIC :
|
|
NIG_REG_P0_HDRS_AFTER_BASIC, 0xE);
|
|
} else {
|
|
REG_WR(sc, SC_PORT(sc) ?
|
|
NIG_REG_P1_HDRS_AFTER_BASIC :
|
|
NIG_REG_P0_HDRS_AFTER_BASIC,
|
|
IS_MF_SD(sc) ? 7 : 6);
|
|
}
|
|
|
|
if (CHIP_IS_E3(sc)) {
|
|
REG_WR(sc, SC_PORT(sc) ?
|
|
NIG_REG_LLH1_MF_MODE :
|
|
NIG_REG_LLH_MF_MODE, IS_MF(sc));
|
|
}
|
|
}
|
|
if (!CHIP_IS_E3(sc)) {
|
|
REG_WR(sc, NIG_REG_XGXS_SERDES0_MODE_SEL + port * 4, 1);
|
|
}
|
|
|
|
/* 0x2 disable mf_ov, 0x1 enable */
|
|
REG_WR(sc, NIG_REG_LLH0_BRB1_DRV_MASK_MF + port * 4,
|
|
(IS_MF_SD(sc) ? 0x1 : 0x2));
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
val = 0;
|
|
switch (sc->devinfo.mf_info.mf_mode) {
|
|
case MULTI_FUNCTION_SD:
|
|
val = 1;
|
|
break;
|
|
case MULTI_FUNCTION_SI:
|
|
case MULTI_FUNCTION_AFEX:
|
|
val = 2;
|
|
break;
|
|
}
|
|
|
|
REG_WR(sc, (SC_PORT(sc) ? NIG_REG_LLH1_CLS_TYPE :
|
|
NIG_REG_LLH0_CLS_TYPE), val);
|
|
}
|
|
REG_WR(sc, NIG_REG_LLFC_ENABLE_0 + port * 4, 0);
|
|
REG_WR(sc, NIG_REG_LLFC_OUT_EN_0 + port * 4, 0);
|
|
REG_WR(sc, NIG_REG_PAUSE_ENABLE_0 + port * 4, 1);
|
|
|
|
/* If SPIO5 is set to generate interrupts, enable it for this port */
|
|
val = REG_RD(sc, MISC_REG_SPIO_EVENT_EN);
|
|
if (val & MISC_SPIO_SPIO5) {
|
|
uint32_t reg_addr = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
|
|
MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
|
|
val = REG_RD(sc, reg_addr);
|
|
val |= AEU_INPUTS_ATTN_BITS_SPIO5;
|
|
REG_WR(sc, reg_addr, val);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static uint32_t
|
|
bnx2x_flr_clnup_reg_poll(struct bnx2x_softc *sc, uint32_t reg,
|
|
uint32_t expected, uint32_t poll_count)
|
|
{
|
|
uint32_t cur_cnt = poll_count;
|
|
uint32_t val;
|
|
|
|
while ((val = REG_RD(sc, reg)) != expected && cur_cnt--) {
|
|
DELAY(FLR_WAIT_INTERVAL);
|
|
}
|
|
|
|
return val;
|
|
}
|
|
|
|
static int
|
|
bnx2x_flr_clnup_poll_hw_counter(struct bnx2x_softc *sc, uint32_t reg,
|
|
__rte_unused const char *msg, uint32_t poll_cnt)
|
|
{
|
|
uint32_t val = bnx2x_flr_clnup_reg_poll(sc, reg, 0, poll_cnt);
|
|
|
|
if (val != 0) {
|
|
PMD_DRV_LOG(NOTICE, "%s usage count=%d", msg, val);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Common routines with VF FLR cleanup */
|
|
static uint32_t bnx2x_flr_clnup_poll_count(struct bnx2x_softc *sc)
|
|
{
|
|
/* adjust polling timeout */
|
|
if (CHIP_REV_IS_EMUL(sc)) {
|
|
return FLR_POLL_CNT * 2000;
|
|
}
|
|
|
|
if (CHIP_REV_IS_FPGA(sc)) {
|
|
return FLR_POLL_CNT * 120;
|
|
}
|
|
|
|
return FLR_POLL_CNT;
|
|
}
|
|
|
|
static int bnx2x_poll_hw_usage_counters(struct bnx2x_softc *sc, uint32_t poll_cnt)
|
|
{
|
|
/* wait for CFC PF usage-counter to zero (includes all the VFs) */
|
|
if (bnx2x_flr_clnup_poll_hw_counter(sc,
|
|
CFC_REG_NUM_LCIDS_INSIDE_PF,
|
|
"CFC PF usage counter timed out",
|
|
poll_cnt)) {
|
|
return -1;
|
|
}
|
|
|
|
/* Wait for DQ PF usage-counter to zero (until DQ cleanup) */
|
|
if (bnx2x_flr_clnup_poll_hw_counter(sc,
|
|
DORQ_REG_PF_USAGE_CNT,
|
|
"DQ PF usage counter timed out",
|
|
poll_cnt)) {
|
|
return -1;
|
|
}
|
|
|
|
/* Wait for QM PF usage-counter to zero (until DQ cleanup) */
|
|
if (bnx2x_flr_clnup_poll_hw_counter(sc,
|
|
QM_REG_PF_USG_CNT_0 + 4 * SC_FUNC(sc),
|
|
"QM PF usage counter timed out",
|
|
poll_cnt)) {
|
|
return -1;
|
|
}
|
|
|
|
/* Wait for Timer PF usage-counters to zero (until DQ cleanup) */
|
|
if (bnx2x_flr_clnup_poll_hw_counter(sc,
|
|
TM_REG_LIN0_VNIC_UC + 4 * SC_PORT(sc),
|
|
"Timers VNIC usage counter timed out",
|
|
poll_cnt)) {
|
|
return -1;
|
|
}
|
|
|
|
if (bnx2x_flr_clnup_poll_hw_counter(sc,
|
|
TM_REG_LIN0_NUM_SCANS +
|
|
4 * SC_PORT(sc),
|
|
"Timers NUM_SCANS usage counter timed out",
|
|
poll_cnt)) {
|
|
return -1;
|
|
}
|
|
|
|
/* Wait DMAE PF usage counter to zero */
|
|
if (bnx2x_flr_clnup_poll_hw_counter(sc,
|
|
dmae_reg_go_c[INIT_DMAE_C(sc)],
|
|
"DMAE dommand register timed out",
|
|
poll_cnt)) {
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define OP_GEN_PARAM(param) \
|
|
(((param) << SDM_OP_GEN_COMP_PARAM_SHIFT) & SDM_OP_GEN_COMP_PARAM)
|
|
#define OP_GEN_TYPE(type) \
|
|
(((type) << SDM_OP_GEN_COMP_TYPE_SHIFT) & SDM_OP_GEN_COMP_TYPE)
|
|
#define OP_GEN_AGG_VECT(index) \
|
|
(((index) << SDM_OP_GEN_AGG_VECT_IDX_SHIFT) & SDM_OP_GEN_AGG_VECT_IDX)
|
|
|
|
static int
|
|
bnx2x_send_final_clnup(struct bnx2x_softc *sc, uint8_t clnup_func,
|
|
uint32_t poll_cnt)
|
|
{
|
|
uint32_t op_gen_command = 0;
|
|
uint32_t comp_addr = (BAR_CSTRORM_INTMEM +
|
|
CSTORM_FINAL_CLEANUP_COMPLETE_OFFSET(clnup_func));
|
|
int ret = 0;
|
|
|
|
if (REG_RD(sc, comp_addr)) {
|
|
PMD_DRV_LOG(NOTICE,
|
|
"Cleanup complete was not 0 before sending");
|
|
return -1;
|
|
}
|
|
|
|
op_gen_command |= OP_GEN_PARAM(XSTORM_AGG_INT_FINAL_CLEANUP_INDEX);
|
|
op_gen_command |= OP_GEN_TYPE(XSTORM_AGG_INT_FINAL_CLEANUP_COMP_TYPE);
|
|
op_gen_command |= OP_GEN_AGG_VECT(clnup_func);
|
|
op_gen_command |= 1 << SDM_OP_GEN_AGG_VECT_IDX_VALID_SHIFT;
|
|
|
|
REG_WR(sc, XSDM_REG_OPERATION_GEN, op_gen_command);
|
|
|
|
if (bnx2x_flr_clnup_reg_poll(sc, comp_addr, 1, poll_cnt) != 1) {
|
|
PMD_DRV_LOG(NOTICE, "FW final cleanup did not succeed");
|
|
PMD_DRV_LOG(DEBUG, "At timeout completion address contained %x",
|
|
(REG_RD(sc, comp_addr)));
|
|
rte_panic("FLR cleanup failed");
|
|
return -1;
|
|
}
|
|
|
|
/* Zero completion for nxt FLR */
|
|
REG_WR(sc, comp_addr, 0);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void
|
|
bnx2x_pbf_pN_buf_flushed(struct bnx2x_softc *sc, struct pbf_pN_buf_regs *regs,
|
|
uint32_t poll_count)
|
|
{
|
|
uint32_t init_crd, crd, crd_start, crd_freed, crd_freed_start;
|
|
uint32_t cur_cnt = poll_count;
|
|
|
|
crd_freed = crd_freed_start = REG_RD(sc, regs->crd_freed);
|
|
crd = crd_start = REG_RD(sc, regs->crd);
|
|
init_crd = REG_RD(sc, regs->init_crd);
|
|
|
|
while ((crd != init_crd) &&
|
|
((uint32_t) ((int32_t) crd_freed - (int32_t) crd_freed_start) <
|
|
(init_crd - crd_start))) {
|
|
if (cur_cnt--) {
|
|
DELAY(FLR_WAIT_INTERVAL);
|
|
crd = REG_RD(sc, regs->crd);
|
|
crd_freed = REG_RD(sc, regs->crd_freed);
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
bnx2x_pbf_pN_cmd_flushed(struct bnx2x_softc *sc, struct pbf_pN_cmd_regs *regs,
|
|
uint32_t poll_count)
|
|
{
|
|
uint32_t occup, to_free, freed, freed_start;
|
|
uint32_t cur_cnt = poll_count;
|
|
|
|
occup = to_free = REG_RD(sc, regs->lines_occup);
|
|
freed = freed_start = REG_RD(sc, regs->lines_freed);
|
|
|
|
while (occup &&
|
|
((uint32_t) ((int32_t) freed - (int32_t) freed_start) <
|
|
to_free)) {
|
|
if (cur_cnt--) {
|
|
DELAY(FLR_WAIT_INTERVAL);
|
|
occup = REG_RD(sc, regs->lines_occup);
|
|
freed = REG_RD(sc, regs->lines_freed);
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void bnx2x_tx_hw_flushed(struct bnx2x_softc *sc, uint32_t poll_count)
|
|
{
|
|
struct pbf_pN_cmd_regs cmd_regs[] = {
|
|
{0, (CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_TQ_OCCUPANCY_Q0 : PBF_REG_P0_TQ_OCCUPANCY,
|
|
(CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_TQ_LINES_FREED_CNT_Q0 : PBF_REG_P0_TQ_LINES_FREED_CNT},
|
|
{1, (CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_TQ_OCCUPANCY_Q1 : PBF_REG_P1_TQ_OCCUPANCY,
|
|
(CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_TQ_LINES_FREED_CNT_Q1 : PBF_REG_P1_TQ_LINES_FREED_CNT},
|
|
{4, (CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_TQ_OCCUPANCY_LB_Q : PBF_REG_P4_TQ_OCCUPANCY,
|
|
(CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_TQ_LINES_FREED_CNT_LB_Q :
|
|
PBF_REG_P4_TQ_LINES_FREED_CNT}
|
|
};
|
|
|
|
struct pbf_pN_buf_regs buf_regs[] = {
|
|
{0, (CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_INIT_CRD_Q0 : PBF_REG_P0_INIT_CRD,
|
|
(CHIP_IS_E3B0(sc)) ? PBF_REG_CREDIT_Q0 : PBF_REG_P0_CREDIT,
|
|
(CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_INTERNAL_CRD_FREED_CNT_Q0 :
|
|
PBF_REG_P0_INTERNAL_CRD_FREED_CNT},
|
|
{1, (CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_INIT_CRD_Q1 : PBF_REG_P1_INIT_CRD,
|
|
(CHIP_IS_E3B0(sc)) ? PBF_REG_CREDIT_Q1 : PBF_REG_P1_CREDIT,
|
|
(CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_INTERNAL_CRD_FREED_CNT_Q1 :
|
|
PBF_REG_P1_INTERNAL_CRD_FREED_CNT},
|
|
{4, (CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_INIT_CRD_LB_Q : PBF_REG_P4_INIT_CRD,
|
|
(CHIP_IS_E3B0(sc)) ? PBF_REG_CREDIT_LB_Q : PBF_REG_P4_CREDIT,
|
|
(CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_INTERNAL_CRD_FREED_CNT_LB_Q :
|
|
PBF_REG_P4_INTERNAL_CRD_FREED_CNT},
|
|
};
|
|
|
|
uint32_t i;
|
|
|
|
/* Verify the command queues are flushed P0, P1, P4 */
|
|
for (i = 0; i < ARRAY_SIZE(cmd_regs); i++) {
|
|
bnx2x_pbf_pN_cmd_flushed(sc, &cmd_regs[i], poll_count);
|
|
}
|
|
|
|
/* Verify the transmission buffers are flushed P0, P1, P4 */
|
|
for (i = 0; i < ARRAY_SIZE(buf_regs); i++) {
|
|
bnx2x_pbf_pN_buf_flushed(sc, &buf_regs[i], poll_count);
|
|
}
|
|
}
|
|
|
|
static void bnx2x_hw_enable_status(struct bnx2x_softc *sc)
|
|
{
|
|
__rte_unused uint32_t val;
|
|
|
|
val = REG_RD(sc, CFC_REG_WEAK_ENABLE_PF);
|
|
PMD_DRV_LOG(DEBUG, "CFC_REG_WEAK_ENABLE_PF is 0x%x", val);
|
|
|
|
val = REG_RD(sc, PBF_REG_DISABLE_PF);
|
|
PMD_DRV_LOG(DEBUG, "PBF_REG_DISABLE_PF is 0x%x", val);
|
|
|
|
val = REG_RD(sc, IGU_REG_PCI_PF_MSI_EN);
|
|
PMD_DRV_LOG(DEBUG, "IGU_REG_PCI_PF_MSI_EN is 0x%x", val);
|
|
|
|
val = REG_RD(sc, IGU_REG_PCI_PF_MSIX_EN);
|
|
PMD_DRV_LOG(DEBUG, "IGU_REG_PCI_PF_MSIX_EN is 0x%x", val);
|
|
|
|
val = REG_RD(sc, IGU_REG_PCI_PF_MSIX_FUNC_MASK);
|
|
PMD_DRV_LOG(DEBUG, "IGU_REG_PCI_PF_MSIX_FUNC_MASK is 0x%x", val);
|
|
|
|
val = REG_RD(sc, PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR);
|
|
PMD_DRV_LOG(DEBUG, "PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR is 0x%x", val);
|
|
|
|
val = REG_RD(sc, PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR);
|
|
PMD_DRV_LOG(DEBUG, "PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR is 0x%x", val);
|
|
|
|
val = REG_RD(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER);
|
|
PMD_DRV_LOG(DEBUG, "PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER is 0x%x",
|
|
val);
|
|
}
|
|
|
|
/**
|
|
* bnx2x_pf_flr_clnup
|
|
* a. re-enable target read on the PF
|
|
* b. poll cfc per function usgae counter
|
|
* c. poll the qm perfunction usage counter
|
|
* d. poll the tm per function usage counter
|
|
* e. poll the tm per function scan-done indication
|
|
* f. clear the dmae channel associated wit hthe PF
|
|
* g. zero the igu 'trailing edge' and 'leading edge' regs (attentions)
|
|
* h. call the common flr cleanup code with -1 (pf indication)
|
|
*/
|
|
static int bnx2x_pf_flr_clnup(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t poll_cnt = bnx2x_flr_clnup_poll_count(sc);
|
|
|
|
/* Re-enable PF target read access */
|
|
REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1);
|
|
|
|
/* Poll HW usage counters */
|
|
if (bnx2x_poll_hw_usage_counters(sc, poll_cnt)) {
|
|
return -1;
|
|
}
|
|
|
|
/* Zero the igu 'trailing edge' and 'leading edge' */
|
|
|
|
/* Send the FW cleanup command */
|
|
if (bnx2x_send_final_clnup(sc, (uint8_t) SC_FUNC(sc), poll_cnt)) {
|
|
return -1;
|
|
}
|
|
|
|
/* ATC cleanup */
|
|
|
|
/* Verify TX hw is flushed */
|
|
bnx2x_tx_hw_flushed(sc, poll_cnt);
|
|
|
|
/* Wait 100ms (not adjusted according to platform) */
|
|
DELAY(100000);
|
|
|
|
/* Verify no pending pci transactions */
|
|
if (bnx2x_is_pcie_pending(sc)) {
|
|
PMD_DRV_LOG(NOTICE, "PCIE Transactions still pending");
|
|
}
|
|
|
|
/* Debug */
|
|
bnx2x_hw_enable_status(sc);
|
|
|
|
/*
|
|
* Master enable - Due to WB DMAE writes performed before this
|
|
* register is re-initialized as part of the regular function init
|
|
*/
|
|
REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_init_hw_func(struct bnx2x_softc *sc)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
int func = SC_FUNC(sc);
|
|
int init_phase = PHASE_PF0 + func;
|
|
struct ecore_ilt *ilt = sc->ilt;
|
|
uint16_t cdu_ilt_start;
|
|
uint32_t addr, val;
|
|
uint32_t main_mem_base, main_mem_size, main_mem_prty_clr;
|
|
int main_mem_width, rc;
|
|
uint32_t i;
|
|
|
|
PMD_DRV_LOG(DEBUG, "starting func init for func %d", func);
|
|
|
|
/* FLR cleanup */
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
rc = bnx2x_pf_flr_clnup(sc);
|
|
if (rc) {
|
|
PMD_DRV_LOG(NOTICE, "FLR cleanup failed!");
|
|
return rc;
|
|
}
|
|
}
|
|
|
|
/* set MSI reconfigure capability */
|
|
if (sc->devinfo.int_block == INT_BLOCK_HC) {
|
|
addr = (port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0);
|
|
val = REG_RD(sc, addr);
|
|
val |= HC_CONFIG_0_REG_MSI_ATTN_EN_0;
|
|
REG_WR(sc, addr, val);
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_PXP, init_phase);
|
|
ecore_init_block(sc, BLOCK_PXP2, init_phase);
|
|
|
|
ilt = sc->ilt;
|
|
cdu_ilt_start = ilt->clients[ILT_CLIENT_CDU].start;
|
|
|
|
for (i = 0; i < L2_ILT_LINES(sc); i++) {
|
|
ilt->lines[cdu_ilt_start + i].page = sc->context[i].vcxt;
|
|
ilt->lines[cdu_ilt_start + i].page_mapping =
|
|
(phys_addr_t)sc->context[i].vcxt_dma.paddr;
|
|
ilt->lines[cdu_ilt_start + i].size = sc->context[i].size;
|
|
}
|
|
ecore_ilt_init_op(sc, INITOP_SET);
|
|
|
|
REG_WR(sc, PRS_REG_NIC_MODE, 1);
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
uint32_t pf_conf = IGU_PF_CONF_FUNC_EN;
|
|
|
|
/* Turn on a single ISR mode in IGU if driver is going to use
|
|
* INT#x or MSI
|
|
*/
|
|
if ((sc->interrupt_mode != INTR_MODE_MSIX)
|
|
|| (sc->interrupt_mode != INTR_MODE_SINGLE_MSIX)) {
|
|
pf_conf |= IGU_PF_CONF_SINGLE_ISR_EN;
|
|
}
|
|
|
|
/*
|
|
* Timers workaround bug: function init part.
|
|
* Need to wait 20msec after initializing ILT,
|
|
* needed to make sure there are no requests in
|
|
* one of the PXP internal queues with "old" ILT addresses
|
|
*/
|
|
DELAY(20000);
|
|
|
|
/*
|
|
* Master enable - Due to WB DMAE writes performed before this
|
|
* register is re-initialized as part of the regular function
|
|
* init
|
|
*/
|
|
REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1);
|
|
/* Enable the function in IGU */
|
|
REG_WR(sc, IGU_REG_PF_CONFIGURATION, pf_conf);
|
|
}
|
|
|
|
sc->dmae_ready = 1;
|
|
|
|
ecore_init_block(sc, BLOCK_PGLUE_B, init_phase);
|
|
|
|
if (!CHIP_IS_E1x(sc))
|
|
REG_WR(sc, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR, func);
|
|
|
|
ecore_init_block(sc, BLOCK_ATC, init_phase);
|
|
ecore_init_block(sc, BLOCK_DMAE, init_phase);
|
|
ecore_init_block(sc, BLOCK_NIG, init_phase);
|
|
ecore_init_block(sc, BLOCK_SRC, init_phase);
|
|
ecore_init_block(sc, BLOCK_MISC, init_phase);
|
|
ecore_init_block(sc, BLOCK_TCM, init_phase);
|
|
ecore_init_block(sc, BLOCK_UCM, init_phase);
|
|
ecore_init_block(sc, BLOCK_CCM, init_phase);
|
|
ecore_init_block(sc, BLOCK_XCM, init_phase);
|
|
ecore_init_block(sc, BLOCK_TSEM, init_phase);
|
|
ecore_init_block(sc, BLOCK_USEM, init_phase);
|
|
ecore_init_block(sc, BLOCK_CSEM, init_phase);
|
|
ecore_init_block(sc, BLOCK_XSEM, init_phase);
|
|
|
|
if (!CHIP_IS_E1x(sc))
|
|
REG_WR(sc, QM_REG_PF_EN, 1);
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
REG_WR(sc, TSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
|
|
REG_WR(sc, USEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
|
|
REG_WR(sc, CSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
|
|
REG_WR(sc, XSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
|
|
}
|
|
ecore_init_block(sc, BLOCK_QM, init_phase);
|
|
|
|
ecore_init_block(sc, BLOCK_TM, init_phase);
|
|
ecore_init_block(sc, BLOCK_DORQ, init_phase);
|
|
|
|
ecore_init_block(sc, BLOCK_BRB1, init_phase);
|
|
ecore_init_block(sc, BLOCK_PRS, init_phase);
|
|
ecore_init_block(sc, BLOCK_TSDM, init_phase);
|
|
ecore_init_block(sc, BLOCK_CSDM, init_phase);
|
|
ecore_init_block(sc, BLOCK_USDM, init_phase);
|
|
ecore_init_block(sc, BLOCK_XSDM, init_phase);
|
|
ecore_init_block(sc, BLOCK_UPB, init_phase);
|
|
ecore_init_block(sc, BLOCK_XPB, init_phase);
|
|
ecore_init_block(sc, BLOCK_PBF, init_phase);
|
|
if (!CHIP_IS_E1x(sc))
|
|
REG_WR(sc, PBF_REG_DISABLE_PF, 0);
|
|
|
|
ecore_init_block(sc, BLOCK_CDU, init_phase);
|
|
|
|
ecore_init_block(sc, BLOCK_CFC, init_phase);
|
|
|
|
if (!CHIP_IS_E1x(sc))
|
|
REG_WR(sc, CFC_REG_WEAK_ENABLE_PF, 1);
|
|
|
|
if (IS_MF(sc)) {
|
|
REG_WR(sc, NIG_REG_LLH0_FUNC_EN + port * 8, 1);
|
|
REG_WR(sc, NIG_REG_LLH0_FUNC_VLAN_ID + port * 8, OVLAN(sc));
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_MISC_AEU, init_phase);
|
|
|
|
/* HC init per function */
|
|
if (sc->devinfo.int_block == INT_BLOCK_HC) {
|
|
if (CHIP_IS_E1H(sc)) {
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_12 + func * 4, 0);
|
|
|
|
REG_WR(sc, HC_REG_LEADING_EDGE_0 + port * 8, 0);
|
|
REG_WR(sc, HC_REG_TRAILING_EDGE_0 + port * 8, 0);
|
|
}
|
|
ecore_init_block(sc, BLOCK_HC, init_phase);
|
|
|
|
} else {
|
|
uint32_t num_segs, sb_idx, prod_offset;
|
|
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_12 + func * 4, 0);
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
REG_WR(sc, IGU_REG_LEADING_EDGE_LATCH, 0);
|
|
REG_WR(sc, IGU_REG_TRAILING_EDGE_LATCH, 0);
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_IGU, init_phase);
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
int dsb_idx = 0;
|
|
/**
|
|
* Producer memory:
|
|
* E2 mode: address 0-135 match to the mapping memory;
|
|
* 136 - PF0 default prod; 137 - PF1 default prod;
|
|
* 138 - PF2 default prod; 139 - PF3 default prod;
|
|
* 140 - PF0 attn prod; 141 - PF1 attn prod;
|
|
* 142 - PF2 attn prod; 143 - PF3 attn prod;
|
|
* 144-147 reserved.
|
|
*
|
|
* E1.5 mode - In backward compatible mode;
|
|
* for non default SB; each even line in the memory
|
|
* holds the U producer and each odd line hold
|
|
* the C producer. The first 128 producers are for
|
|
* NDSB (PF0 - 0-31; PF1 - 32-63 and so on). The last 20
|
|
* producers are for the DSB for each PF.
|
|
* Each PF has five segments: (the order inside each
|
|
* segment is PF0; PF1; PF2; PF3) - 128-131 U prods;
|
|
* 132-135 C prods; 136-139 X prods; 140-143 T prods;
|
|
* 144-147 attn prods;
|
|
*/
|
|
/* non-default-status-blocks */
|
|
num_segs = CHIP_INT_MODE_IS_BC(sc) ?
|
|
IGU_BC_NDSB_NUM_SEGS : IGU_NORM_NDSB_NUM_SEGS;
|
|
for (sb_idx = 0; sb_idx < sc->igu_sb_cnt; sb_idx++) {
|
|
prod_offset = (sc->igu_base_sb + sb_idx) *
|
|
num_segs;
|
|
|
|
for (i = 0; i < num_segs; i++) {
|
|
addr = IGU_REG_PROD_CONS_MEMORY +
|
|
(prod_offset + i) * 4;
|
|
REG_WR(sc, addr, 0);
|
|
}
|
|
/* send consumer update with value 0 */
|
|
bnx2x_ack_sb(sc, sc->igu_base_sb + sb_idx,
|
|
USTORM_ID, 0, IGU_INT_NOP, 1);
|
|
bnx2x_igu_clear_sb(sc, sc->igu_base_sb + sb_idx);
|
|
}
|
|
|
|
/* default-status-blocks */
|
|
num_segs = CHIP_INT_MODE_IS_BC(sc) ?
|
|
IGU_BC_DSB_NUM_SEGS : IGU_NORM_DSB_NUM_SEGS;
|
|
|
|
if (CHIP_IS_MODE_4_PORT(sc))
|
|
dsb_idx = SC_FUNC(sc);
|
|
else
|
|
dsb_idx = SC_VN(sc);
|
|
|
|
prod_offset = (CHIP_INT_MODE_IS_BC(sc) ?
|
|
IGU_BC_BASE_DSB_PROD + dsb_idx :
|
|
IGU_NORM_BASE_DSB_PROD + dsb_idx);
|
|
|
|
/*
|
|
* igu prods come in chunks of E1HVN_MAX (4) -
|
|
* does not matters what is the current chip mode
|
|
*/
|
|
for (i = 0; i < (num_segs * E1HVN_MAX); i += E1HVN_MAX) {
|
|
addr = IGU_REG_PROD_CONS_MEMORY +
|
|
(prod_offset + i) * 4;
|
|
REG_WR(sc, addr, 0);
|
|
}
|
|
/* send consumer update with 0 */
|
|
if (CHIP_INT_MODE_IS_BC(sc)) {
|
|
bnx2x_ack_sb(sc, sc->igu_dsb_id,
|
|
USTORM_ID, 0, IGU_INT_NOP, 1);
|
|
bnx2x_ack_sb(sc, sc->igu_dsb_id,
|
|
CSTORM_ID, 0, IGU_INT_NOP, 1);
|
|
bnx2x_ack_sb(sc, sc->igu_dsb_id,
|
|
XSTORM_ID, 0, IGU_INT_NOP, 1);
|
|
bnx2x_ack_sb(sc, sc->igu_dsb_id,
|
|
TSTORM_ID, 0, IGU_INT_NOP, 1);
|
|
bnx2x_ack_sb(sc, sc->igu_dsb_id,
|
|
ATTENTION_ID, 0, IGU_INT_NOP, 1);
|
|
} else {
|
|
bnx2x_ack_sb(sc, sc->igu_dsb_id,
|
|
USTORM_ID, 0, IGU_INT_NOP, 1);
|
|
bnx2x_ack_sb(sc, sc->igu_dsb_id,
|
|
ATTENTION_ID, 0, IGU_INT_NOP, 1);
|
|
}
|
|
bnx2x_igu_clear_sb(sc, sc->igu_dsb_id);
|
|
|
|
/* !!! these should become driver const once
|
|
rf-tool supports split-68 const */
|
|
REG_WR(sc, IGU_REG_SB_INT_BEFORE_MASK_LSB, 0);
|
|
REG_WR(sc, IGU_REG_SB_INT_BEFORE_MASK_MSB, 0);
|
|
REG_WR(sc, IGU_REG_SB_MASK_LSB, 0);
|
|
REG_WR(sc, IGU_REG_SB_MASK_MSB, 0);
|
|
REG_WR(sc, IGU_REG_PBA_STATUS_LSB, 0);
|
|
REG_WR(sc, IGU_REG_PBA_STATUS_MSB, 0);
|
|
}
|
|
}
|
|
|
|
/* Reset PCIE errors for debug */
|
|
REG_WR(sc, 0x2114, 0xffffffff);
|
|
REG_WR(sc, 0x2120, 0xffffffff);
|
|
|
|
if (CHIP_IS_E1x(sc)) {
|
|
main_mem_size = HC_REG_MAIN_MEMORY_SIZE / 2; /*dwords */
|
|
main_mem_base = HC_REG_MAIN_MEMORY +
|
|
SC_PORT(sc) * (main_mem_size * 4);
|
|
main_mem_prty_clr = HC_REG_HC_PRTY_STS_CLR;
|
|
main_mem_width = 8;
|
|
|
|
val = REG_RD(sc, main_mem_prty_clr);
|
|
if (val) {
|
|
PMD_DRV_LOG(DEBUG,
|
|
"Parity errors in HC block during function init (0x%x)!",
|
|
val);
|
|
}
|
|
|
|
/* Clear "false" parity errors in MSI-X table */
|
|
for (i = main_mem_base;
|
|
i < main_mem_base + main_mem_size * 4;
|
|
i += main_mem_width) {
|
|
bnx2x_read_dmae(sc, i, main_mem_width / 4);
|
|
bnx2x_write_dmae(sc, BNX2X_SP_MAPPING(sc, wb_data),
|
|
i, main_mem_width / 4);
|
|
}
|
|
/* Clear HC parity attention */
|
|
REG_RD(sc, main_mem_prty_clr);
|
|
}
|
|
|
|
/* Enable STORMs SP logging */
|
|
REG_WR8(sc, BAR_USTRORM_INTMEM +
|
|
USTORM_RECORD_SLOW_PATH_OFFSET(SC_FUNC(sc)), 1);
|
|
REG_WR8(sc, BAR_TSTRORM_INTMEM +
|
|
TSTORM_RECORD_SLOW_PATH_OFFSET(SC_FUNC(sc)), 1);
|
|
REG_WR8(sc, BAR_CSTRORM_INTMEM +
|
|
CSTORM_RECORD_SLOW_PATH_OFFSET(SC_FUNC(sc)), 1);
|
|
REG_WR8(sc, BAR_XSTRORM_INTMEM +
|
|
XSTORM_RECORD_SLOW_PATH_OFFSET(SC_FUNC(sc)), 1);
|
|
|
|
elink_phy_probe(&sc->link_params);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bnx2x_link_reset(struct bnx2x_softc *sc)
|
|
{
|
|
if (!BNX2X_NOMCP(sc)) {
|
|
elink_lfa_reset(&sc->link_params, &sc->link_vars);
|
|
} else {
|
|
if (!CHIP_REV_IS_SLOW(sc)) {
|
|
PMD_DRV_LOG(WARNING,
|
|
"Bootcode is missing - cannot reset link");
|
|
}
|
|
}
|
|
}
|
|
|
|
static void bnx2x_reset_port(struct bnx2x_softc *sc)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
uint32_t val;
|
|
|
|
/* reset physical Link */
|
|
bnx2x_link_reset(sc);
|
|
|
|
REG_WR(sc, NIG_REG_MASK_INTERRUPT_PORT0 + port * 4, 0);
|
|
|
|
/* Do not rcv packets to BRB */
|
|
REG_WR(sc, NIG_REG_LLH0_BRB1_DRV_MASK + port * 4, 0x0);
|
|
/* Do not direct rcv packets that are not for MCP to the BRB */
|
|
REG_WR(sc, (port ? NIG_REG_LLH1_BRB1_NOT_MCP :
|
|
NIG_REG_LLH0_BRB1_NOT_MCP), 0x0);
|
|
|
|
/* Configure AEU */
|
|
REG_WR(sc, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port * 4, 0);
|
|
|
|
DELAY(100000);
|
|
|
|
/* Check for BRB port occupancy */
|
|
val = REG_RD(sc, BRB1_REG_PORT_NUM_OCC_BLOCKS_0 + port * 4);
|
|
if (val) {
|
|
PMD_DRV_LOG(DEBUG,
|
|
"BRB1 is not empty, %d blocks are occupied", val);
|
|
}
|
|
}
|
|
|
|
static void bnx2x_ilt_wr(struct bnx2x_softc *sc, uint32_t index, phys_addr_t addr)
|
|
{
|
|
int reg;
|
|
uint32_t wb_write[2];
|
|
|
|
reg = PXP2_REG_RQ_ONCHIP_AT_B0 + index * 8;
|
|
|
|
wb_write[0] = ONCHIP_ADDR1(addr);
|
|
wb_write[1] = ONCHIP_ADDR2(addr);
|
|
REG_WR_DMAE(sc, reg, wb_write, 2);
|
|
}
|
|
|
|
static void bnx2x_clear_func_ilt(struct bnx2x_softc *sc, uint32_t func)
|
|
{
|
|
uint32_t i, base = FUNC_ILT_BASE(func);
|
|
for (i = base; i < base + ILT_PER_FUNC; i++) {
|
|
bnx2x_ilt_wr(sc, i, 0);
|
|
}
|
|
}
|
|
|
|
static void bnx2x_reset_func(struct bnx2x_softc *sc)
|
|
{
|
|
struct bnx2x_fastpath *fp;
|
|
int port = SC_PORT(sc);
|
|
int func = SC_FUNC(sc);
|
|
int i;
|
|
|
|
/* Disable the function in the FW */
|
|
REG_WR8(sc, BAR_XSTRORM_INTMEM + XSTORM_FUNC_EN_OFFSET(func), 0);
|
|
REG_WR8(sc, BAR_CSTRORM_INTMEM + CSTORM_FUNC_EN_OFFSET(func), 0);
|
|
REG_WR8(sc, BAR_TSTRORM_INTMEM + TSTORM_FUNC_EN_OFFSET(func), 0);
|
|
REG_WR8(sc, BAR_USTRORM_INTMEM + USTORM_FUNC_EN_OFFSET(func), 0);
|
|
|
|
/* FP SBs */
|
|
FOR_EACH_ETH_QUEUE(sc, i) {
|
|
fp = &sc->fp[i];
|
|
REG_WR8(sc, BAR_CSTRORM_INTMEM +
|
|
CSTORM_STATUS_BLOCK_DATA_STATE_OFFSET(fp->fw_sb_id),
|
|
SB_DISABLED);
|
|
}
|
|
|
|
/* SP SB */
|
|
REG_WR8(sc, BAR_CSTRORM_INTMEM +
|
|
CSTORM_SP_STATUS_BLOCK_DATA_STATE_OFFSET(func), SB_DISABLED);
|
|
|
|
for (i = 0; i < XSTORM_SPQ_DATA_SIZE / 4; i++) {
|
|
REG_WR(sc, BAR_XSTRORM_INTMEM + XSTORM_SPQ_DATA_OFFSET(func),
|
|
0);
|
|
}
|
|
|
|
/* Configure IGU */
|
|
if (sc->devinfo.int_block == INT_BLOCK_HC) {
|
|
REG_WR(sc, HC_REG_LEADING_EDGE_0 + port * 8, 0);
|
|
REG_WR(sc, HC_REG_TRAILING_EDGE_0 + port * 8, 0);
|
|
} else {
|
|
REG_WR(sc, IGU_REG_LEADING_EDGE_LATCH, 0);
|
|
REG_WR(sc, IGU_REG_TRAILING_EDGE_LATCH, 0);
|
|
}
|
|
|
|
if (CNIC_LOADED(sc)) {
|
|
/* Disable Timer scan */
|
|
REG_WR(sc, TM_REG_EN_LINEAR0_TIMER + port * 4, 0);
|
|
/*
|
|
* Wait for at least 10ms and up to 2 second for the timers
|
|
* scan to complete
|
|
*/
|
|
for (i = 0; i < 200; i++) {
|
|
DELAY(10000);
|
|
if (!REG_RD(sc, TM_REG_LIN0_SCAN_ON + port * 4))
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Clear ILT */
|
|
bnx2x_clear_func_ilt(sc, func);
|
|
|
|
/*
|
|
* Timers workaround bug for E2: if this is vnic-3,
|
|
* we need to set the entire ilt range for this timers.
|
|
*/
|
|
if (!CHIP_IS_E1x(sc) && SC_VN(sc) == 3) {
|
|
struct ilt_client_info ilt_cli;
|
|
/* use dummy TM client */
|
|
memset(&ilt_cli, 0, sizeof(struct ilt_client_info));
|
|
ilt_cli.start = 0;
|
|
ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1;
|
|
ilt_cli.client_num = ILT_CLIENT_TM;
|
|
|
|
ecore_ilt_boundry_init_op(sc, &ilt_cli, 0);
|
|
}
|
|
|
|
/* this assumes that reset_port() called before reset_func() */
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
bnx2x_pf_disable(sc);
|
|
}
|
|
|
|
sc->dmae_ready = 0;
|
|
}
|
|
|
|
static void bnx2x_release_firmware(struct bnx2x_softc *sc)
|
|
{
|
|
rte_free(sc->init_ops);
|
|
rte_free(sc->init_ops_offsets);
|
|
rte_free(sc->init_data);
|
|
rte_free(sc->iro_array);
|
|
}
|
|
|
|
static int bnx2x_init_firmware(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t len, i;
|
|
uint8_t *p = sc->firmware;
|
|
uint32_t off[24];
|
|
|
|
for (i = 0; i < 24; ++i)
|
|
off[i] = rte_be_to_cpu_32(*((uint32_t *) sc->firmware + i));
|
|
|
|
len = off[0];
|
|
sc->init_ops = rte_zmalloc("", len, RTE_CACHE_LINE_SIZE);
|
|
if (!sc->init_ops)
|
|
goto alloc_failed;
|
|
bnx2x_data_to_init_ops(p + off[1], sc->init_ops, len);
|
|
|
|
len = off[2];
|
|
sc->init_ops_offsets = rte_zmalloc("", len, RTE_CACHE_LINE_SIZE);
|
|
if (!sc->init_ops_offsets)
|
|
goto alloc_failed;
|
|
bnx2x_data_to_init_offsets(p + off[3], sc->init_ops_offsets, len);
|
|
|
|
len = off[4];
|
|
sc->init_data = rte_zmalloc("", len, RTE_CACHE_LINE_SIZE);
|
|
if (!sc->init_data)
|
|
goto alloc_failed;
|
|
bnx2x_data_to_init_data(p + off[5], sc->init_data, len);
|
|
|
|
sc->tsem_int_table_data = p + off[7];
|
|
sc->tsem_pram_data = p + off[9];
|
|
sc->usem_int_table_data = p + off[11];
|
|
sc->usem_pram_data = p + off[13];
|
|
sc->csem_int_table_data = p + off[15];
|
|
sc->csem_pram_data = p + off[17];
|
|
sc->xsem_int_table_data = p + off[19];
|
|
sc->xsem_pram_data = p + off[21];
|
|
|
|
len = off[22];
|
|
sc->iro_array = rte_zmalloc("", len, RTE_CACHE_LINE_SIZE);
|
|
if (!sc->iro_array)
|
|
goto alloc_failed;
|
|
bnx2x_data_to_iro_array(p + off[23], sc->iro_array, len);
|
|
|
|
return 0;
|
|
|
|
alloc_failed:
|
|
bnx2x_release_firmware(sc);
|
|
return -1;
|
|
}
|
|
|
|
static int cut_gzip_prefix(const uint8_t * zbuf, int len)
|
|
{
|
|
#define MIN_PREFIX_SIZE (10)
|
|
|
|
int n = MIN_PREFIX_SIZE;
|
|
uint16_t xlen;
|
|
|
|
if (!(zbuf[0] == 0x1f && zbuf[1] == 0x8b && zbuf[2] == Z_DEFLATED) ||
|
|
len <= MIN_PREFIX_SIZE) {
|
|
return -1;
|
|
}
|
|
|
|
/* optional extra fields are present */
|
|
if (zbuf[3] & 0x4) {
|
|
xlen = zbuf[13];
|
|
xlen <<= 8;
|
|
xlen += zbuf[12];
|
|
|
|
n += xlen;
|
|
}
|
|
/* file name is present */
|
|
if (zbuf[3] & 0x8) {
|
|
while ((zbuf[n++] != 0) && (n < len)) ;
|
|
}
|
|
|
|
return n;
|
|
}
|
|
|
|
static int ecore_gunzip(struct bnx2x_softc *sc, const uint8_t * zbuf, int len)
|
|
{
|
|
int ret;
|
|
int data_begin = cut_gzip_prefix(zbuf, len);
|
|
|
|
PMD_DRV_LOG(DEBUG, "ecore_gunzip %d", len);
|
|
|
|
if (data_begin <= 0) {
|
|
PMD_DRV_LOG(NOTICE, "bad gzip prefix");
|
|
return -1;
|
|
}
|
|
|
|
memset(&zlib_stream, 0, sizeof(zlib_stream));
|
|
zlib_stream.next_in = zbuf + data_begin;
|
|
zlib_stream.avail_in = len - data_begin;
|
|
zlib_stream.next_out = sc->gz_buf;
|
|
zlib_stream.avail_out = FW_BUF_SIZE;
|
|
|
|
ret = inflateInit2(&zlib_stream, -MAX_WBITS);
|
|
if (ret != Z_OK) {
|
|
PMD_DRV_LOG(NOTICE, "zlib inflateInit2 error");
|
|
return ret;
|
|
}
|
|
|
|
ret = inflate(&zlib_stream, Z_FINISH);
|
|
if ((ret != Z_STREAM_END) && (ret != Z_OK)) {
|
|
PMD_DRV_LOG(NOTICE, "zlib inflate error: %d %s", ret,
|
|
zlib_stream.msg);
|
|
}
|
|
|
|
sc->gz_outlen = zlib_stream.total_out;
|
|
if (sc->gz_outlen & 0x3) {
|
|
PMD_DRV_LOG(NOTICE, "firmware is not aligned. gz_outlen == %d",
|
|
sc->gz_outlen);
|
|
}
|
|
sc->gz_outlen >>= 2;
|
|
|
|
inflateEnd(&zlib_stream);
|
|
|
|
if (ret == Z_STREAM_END)
|
|
return 0;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void
|
|
ecore_write_dmae_phys_len(struct bnx2x_softc *sc, phys_addr_t phys_addr,
|
|
uint32_t addr, uint32_t len)
|
|
{
|
|
bnx2x_write_dmae_phys_len(sc, phys_addr, addr, len);
|
|
}
|
|
|
|
void
|
|
ecore_storm_memset_struct(struct bnx2x_softc *sc, uint32_t addr, size_t size,
|
|
uint32_t * data)
|
|
{
|
|
uint8_t i;
|
|
for (i = 0; i < size / 4; i++) {
|
|
REG_WR(sc, addr + (i * 4), data[i]);
|
|
}
|
|
}
|
|
|
|
static const char *get_ext_phy_type(uint32_t ext_phy_type)
|
|
{
|
|
uint32_t phy_type_idx = ext_phy_type >> 8;
|
|
static const char *types[] =
|
|
{ "DIRECT", "BNX2X-8071", "BNX2X-8072", "BNX2X-8073",
|
|
"BNX2X-8705", "BNX2X-8706", "BNX2X-8726", "BNX2X-8481", "SFX-7101",
|
|
"BNX2X-8727",
|
|
"BNX2X-8727-NOC", "BNX2X-84823", "NOT_CONN", "FAILURE"
|
|
};
|
|
|
|
if (phy_type_idx < 12)
|
|
return types[phy_type_idx];
|
|
else if (PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN == ext_phy_type)
|
|
return types[12];
|
|
else
|
|
return types[13];
|
|
}
|
|
|
|
static const char *get_state(uint32_t state)
|
|
{
|
|
uint32_t state_idx = state >> 12;
|
|
static const char *states[] = { "CLOSED", "OPENING_WAIT4_LOAD",
|
|
"OPENING_WAIT4_PORT", "OPEN", "CLOSING_WAIT4_HALT",
|
|
"CLOSING_WAIT4_DELETE", "CLOSING_WAIT4_UNLOAD",
|
|
"UNKNOWN", "UNKNOWN", "UNKNOWN", "UNKNOWN", "UNKNOWN",
|
|
"UNKNOWN", "DISABLED", "DIAG", "ERROR", "UNDEFINED"
|
|
};
|
|
|
|
if (state_idx <= 0xF)
|
|
return states[state_idx];
|
|
else
|
|
return states[0x10];
|
|
}
|
|
|
|
static const char *get_recovery_state(uint32_t state)
|
|
{
|
|
static const char *states[] = { "NONE", "DONE", "INIT",
|
|
"WAIT", "FAILED", "NIC_LOADING"
|
|
};
|
|
return states[state];
|
|
}
|
|
|
|
static const char *get_rx_mode(uint32_t mode)
|
|
{
|
|
static const char *modes[] = { "NONE", "NORMAL", "ALLMULTI",
|
|
"PROMISC", "MAX_MULTICAST", "ERROR"
|
|
};
|
|
|
|
if (mode < 0x4)
|
|
return modes[mode];
|
|
else if (BNX2X_MAX_MULTICAST == mode)
|
|
return modes[4];
|
|
else
|
|
return modes[5];
|
|
}
|
|
|
|
#define BNX2X_INFO_STR_MAX 256
|
|
static const char *get_bnx2x_flags(uint32_t flags)
|
|
{
|
|
int i;
|
|
static const char *flag[] = { "ONE_PORT ", "NO_ISCSI ",
|
|
"NO_FCOE ", "NO_WOL ", "USING_DAC ", "USING_MSIX ",
|
|
"USING_MSI ", "DISABLE_MSI ", "UNKNOWN ", "NO_MCP ",
|
|
"SAFC_TX_FLAG ", "MF_FUNC_DIS ", "TX_SWITCHING "
|
|
};
|
|
static char flag_str[BNX2X_INFO_STR_MAX];
|
|
memset(flag_str, 0, BNX2X_INFO_STR_MAX);
|
|
|
|
for (i = 0; i < 5; i++)
|
|
if (flags & (1 << i)) {
|
|
strcat(flag_str, flag[i]);
|
|
flags ^= (1 << i);
|
|
}
|
|
if (flags) {
|
|
static char unknown[BNX2X_INFO_STR_MAX];
|
|
snprintf(unknown, 32, "Unknown flag mask %x", flags);
|
|
strcat(flag_str, unknown);
|
|
}
|
|
return flag_str;
|
|
}
|
|
|
|
/*
|
|
* Prints useful adapter info.
|
|
*/
|
|
void bnx2x_print_adapter_info(struct bnx2x_softc *sc)
|
|
{
|
|
int i = 0;
|
|
__rte_unused uint32_t ext_phy_type;
|
|
|
|
PMD_INIT_FUNC_TRACE();
|
|
if (sc->link_vars.phy_flags & PHY_XGXS_FLAG)
|
|
ext_phy_type = ELINK_XGXS_EXT_PHY_TYPE(REG_RD(sc,
|
|
sc->
|
|
devinfo.shmem_base
|
|
+ offsetof(struct
|
|
shmem_region,
|
|
dev_info.port_hw_config
|
|
[0].external_phy_config)));
|
|
else
|
|
ext_phy_type = ELINK_SERDES_EXT_PHY_TYPE(REG_RD(sc,
|
|
sc->
|
|
devinfo.shmem_base
|
|
+
|
|
offsetof(struct
|
|
shmem_region,
|
|
dev_info.port_hw_config
|
|
[0].external_phy_config)));
|
|
|
|
PMD_INIT_LOG(DEBUG, "\n\n===================================\n");
|
|
/* Hardware chip info. */
|
|
PMD_INIT_LOG(DEBUG, "%12s : %#08x", "ASIC", sc->devinfo.chip_id);
|
|
PMD_INIT_LOG(DEBUG, "%12s : %c%d", "Rev", (CHIP_REV(sc) >> 12) + 'A',
|
|
(CHIP_METAL(sc) >> 4));
|
|
|
|
/* Bus info. */
|
|
PMD_INIT_LOG(DEBUG, "%12s : %d, ", "Bus PCIe", sc->devinfo.pcie_link_width);
|
|
switch (sc->devinfo.pcie_link_speed) {
|
|
case 1:
|
|
PMD_INIT_LOG(DEBUG, "%23s", "2.5 Gbps");
|
|
break;
|
|
case 2:
|
|
PMD_INIT_LOG(DEBUG, "%21s", "5 Gbps");
|
|
break;
|
|
case 4:
|
|
PMD_INIT_LOG(DEBUG, "%21s", "8 Gbps");
|
|
break;
|
|
default:
|
|
PMD_INIT_LOG(DEBUG, "%33s", "Unknown link speed");
|
|
}
|
|
|
|
/* Device features. */
|
|
PMD_INIT_LOG(DEBUG, "%12s : ", "Flags");
|
|
|
|
/* Miscellaneous flags. */
|
|
if (sc->devinfo.pcie_cap_flags & BNX2X_MSI_CAPABLE_FLAG) {
|
|
PMD_INIT_LOG(DEBUG, "%18s", "MSI");
|
|
i++;
|
|
}
|
|
|
|
if (sc->devinfo.pcie_cap_flags & BNX2X_MSIX_CAPABLE_FLAG) {
|
|
if (i > 0)
|
|
PMD_INIT_LOG(DEBUG, "|");
|
|
PMD_INIT_LOG(DEBUG, "%20s", "MSI-X");
|
|
i++;
|
|
}
|
|
|
|
if (IS_PF(sc)) {
|
|
PMD_INIT_LOG(DEBUG, "%12s : ", "Queues");
|
|
switch (sc->sp->rss_rdata.rss_mode) {
|
|
case ETH_RSS_MODE_DISABLED:
|
|
PMD_INIT_LOG(DEBUG, "%19s", "None");
|
|
break;
|
|
case ETH_RSS_MODE_REGULAR:
|
|
PMD_INIT_LOG(DEBUG, "%18s : %d", "RSS", sc->num_queues);
|
|
break;
|
|
default:
|
|
PMD_INIT_LOG(DEBUG, "%22s", "Unknown");
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* RTE and Driver versions */
|
|
PMD_INIT_LOG(DEBUG, "%12s : %s", "DPDK",
|
|
rte_version());
|
|
PMD_INIT_LOG(DEBUG, "%12s : %s", "Driver",
|
|
bnx2x_pmd_version());
|
|
|
|
/* Firmware versions and device features. */
|
|
PMD_INIT_LOG(DEBUG, "%12s : %d.%d.%d",
|
|
"Firmware",
|
|
BNX2X_5710_FW_MAJOR_VERSION,
|
|
BNX2X_5710_FW_MINOR_VERSION,
|
|
BNX2X_5710_FW_REVISION_VERSION);
|
|
PMD_INIT_LOG(DEBUG, "%12s : %s",
|
|
"Bootcode", sc->devinfo.bc_ver_str);
|
|
|
|
PMD_INIT_LOG(DEBUG, "\n\n===================================\n");
|
|
PMD_INIT_LOG(DEBUG, "%12s : %u", "Bnx2x Func", sc->pcie_func);
|
|
PMD_INIT_LOG(DEBUG, "%12s : %s", "Bnx2x Flags", get_bnx2x_flags(sc->flags));
|
|
PMD_INIT_LOG(DEBUG, "%12s : %s", "DMAE Is",
|
|
(sc->dmae_ready ? "Ready" : "Not Ready"));
|
|
PMD_INIT_LOG(DEBUG, "%12s : %s", "OVLAN", (OVLAN(sc) ? "YES" : "NO"));
|
|
PMD_INIT_LOG(DEBUG, "%12s : %s", "MF", (IS_MF(sc) ? "YES" : "NO"));
|
|
PMD_INIT_LOG(DEBUG, "%12s : %u", "MTU", sc->mtu);
|
|
PMD_INIT_LOG(DEBUG, "%12s : %s", "PHY Type", get_ext_phy_type(ext_phy_type));
|
|
PMD_INIT_LOG(DEBUG, "%12s : %x:%x:%x:%x:%x:%x", "MAC Addr",
|
|
sc->link_params.mac_addr[0],
|
|
sc->link_params.mac_addr[1],
|
|
sc->link_params.mac_addr[2],
|
|
sc->link_params.mac_addr[3],
|
|
sc->link_params.mac_addr[4],
|
|
sc->link_params.mac_addr[5]);
|
|
PMD_INIT_LOG(DEBUG, "%12s : %s", "RX Mode", get_rx_mode(sc->rx_mode));
|
|
PMD_INIT_LOG(DEBUG, "%12s : %s", "State", get_state(sc->state));
|
|
if (sc->recovery_state)
|
|
PMD_INIT_LOG(DEBUG, "%12s : %s", "Recovery",
|
|
get_recovery_state(sc->recovery_state));
|
|
PMD_INIT_LOG(DEBUG, "%12s : CQ = %lx, EQ = %lx", "SPQ Left",
|
|
sc->cq_spq_left, sc->eq_spq_left);
|
|
PMD_INIT_LOG(DEBUG, "%12s : %x", "Switch", sc->link_params.switch_cfg);
|
|
PMD_INIT_LOG(DEBUG, "\n\n===================================\n");
|
|
}
|