numam-dpdk/drivers/net/mlx5/mlx5_vlan.c
Michael Baum e96242efa4 net/mlx5: remove Rx queue object type field
Once the separation between Verbs and DevX is done using function
pointers, the type field of the Rx queue object structure becomes
redundant and no more code is used.
Remove the unnecessary field from the structure.

Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
2020-10-09 13:17:42 +02:00

159 lines
4.0 KiB
C

/* SPDX-License-Identifier: BSD-3-Clause
* Copyright 2015 6WIND S.A.
* Copyright 2015 Mellanox Technologies, Ltd
*/
#include <stddef.h>
#include <errno.h>
#include <stdint.h>
#include <unistd.h>
#include <rte_ethdev_driver.h>
#include <rte_common.h>
#include <rte_malloc.h>
#include <rte_hypervisor.h>
#include "mlx5.h"
#include "mlx5_autoconf.h"
#include "mlx5_rxtx.h"
#include "mlx5_utils.h"
#include "mlx5_devx.h"
/**
* DPDK callback to configure a VLAN filter.
*
* @param dev
* Pointer to Ethernet device structure.
* @param vlan_id
* VLAN ID to filter.
* @param on
* Toggle filter.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
{
struct mlx5_priv *priv = dev->data->dev_private;
unsigned int i;
DRV_LOG(DEBUG, "port %u %s VLAN filter ID %" PRIu16,
dev->data->port_id, (on ? "enable" : "disable"), vlan_id);
MLX5_ASSERT(priv->vlan_filter_n <= RTE_DIM(priv->vlan_filter));
for (i = 0; (i != priv->vlan_filter_n); ++i)
if (priv->vlan_filter[i] == vlan_id)
break;
/* Check if there's room for another VLAN filter. */
if (i == RTE_DIM(priv->vlan_filter)) {
rte_errno = ENOMEM;
return -rte_errno;
}
if (i < priv->vlan_filter_n) {
MLX5_ASSERT(priv->vlan_filter_n != 0);
/* Enabling an existing VLAN filter has no effect. */
if (on)
goto out;
/* Remove VLAN filter from list. */
--priv->vlan_filter_n;
memmove(&priv->vlan_filter[i],
&priv->vlan_filter[i + 1],
sizeof(priv->vlan_filter[i]) *
(priv->vlan_filter_n - i));
priv->vlan_filter[priv->vlan_filter_n] = 0;
} else {
MLX5_ASSERT(i == priv->vlan_filter_n);
/* Disabling an unknown VLAN filter has no effect. */
if (!on)
goto out;
/* Add new VLAN filter. */
priv->vlan_filter[priv->vlan_filter_n] = vlan_id;
++priv->vlan_filter_n;
}
out:
if (dev->data->dev_started)
return mlx5_traffic_restart(dev);
return 0;
}
/**
* Callback to set/reset VLAN stripping for a specific queue.
*
* @param dev
* Pointer to Ethernet device structure.
* @param queue
* RX queue index.
* @param on
* Enable/disable VLAN stripping.
*/
void
mlx5_vlan_strip_queue_set(struct rte_eth_dev *dev, uint16_t queue, int on)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_rxq_data *rxq = (*priv->rxqs)[queue];
struct mlx5_rxq_ctrl *rxq_ctrl =
container_of(rxq, struct mlx5_rxq_ctrl, rxq);
int ret = 0;
/* Validate hw support */
if (!priv->config.hw_vlan_strip) {
DRV_LOG(ERR, "port %u VLAN stripping is not supported",
dev->data->port_id);
return;
}
/* Validate queue number */
if (queue >= priv->rxqs_n) {
DRV_LOG(ERR, "port %u VLAN stripping, invalid queue number %d",
dev->data->port_id, queue);
return;
}
DRV_LOG(DEBUG, "port %u set VLAN stripping offloads %d for port %uqueue %d",
dev->data->port_id, on, rxq->port_id, queue);
if (!rxq_ctrl->obj) {
/* Update related bits in RX queue. */
rxq->vlan_strip = !!on;
return;
}
ret = priv->obj_ops.rxq_obj_modify_vlan_strip(rxq_ctrl->obj, on);
if (ret) {
DRV_LOG(ERR, "Port %u failed to modify object stripping mode:"
" %s", dev->data->port_id, strerror(rte_errno));
return;
}
/* Update related bits in RX queue. */
rxq->vlan_strip = !!on;
}
/**
* Callback to set/reset VLAN offloads for a port.
*
* @param dev
* Pointer to Ethernet device structure.
* @param mask
* VLAN offload bit mask.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_vlan_offload_set(struct rte_eth_dev *dev, int mask)
{
struct mlx5_priv *priv = dev->data->dev_private;
unsigned int i;
if (mask & ETH_VLAN_STRIP_MASK) {
int hw_vlan_strip = !!(dev->data->dev_conf.rxmode.offloads &
DEV_RX_OFFLOAD_VLAN_STRIP);
if (!priv->config.hw_vlan_strip) {
DRV_LOG(ERR, "port %u VLAN stripping is not supported",
dev->data->port_id);
return 0;
}
/* Run on every RX queue and set/reset VLAN stripping. */
for (i = 0; (i != priv->rxqs_n); i++)
mlx5_vlan_strip_queue_set(dev, i, hw_vlan_strip);
}
return 0;
}