d/numam-dpdk
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
3df380f617
numam-dpdk/drivers/net/mlx5/mlx5_flow_dv.c
Jiawei Wang bfa87e21bd net/mlx5: fix tunnel header with IPIP offload 
For the flows with multiple tunnel layers and containing
tunnel decap and modify actions, for example:

... / vxlan / eth / ipv4 proto is 4 / end
actions raw_decap / modify_field / ...
(note: proto 4 means we have the IP-over-IP tunnel in VXLAN payload)

We have added the multiple tunnel layers validation rejecting
the flows like above mentioned one.

The hardware supports the above match combination till the inner
IP-over-IP header (not including the last one), both for IP-over-IPv4
and IP-over-IPv6, so we should not blindly reject. Also, for the modify
actions following the decap we should set the layer attributes correctly.

This patch reverts the below code changes to support the match, and
adjusts the layers update in case of decap with outer tunnel header.

Fixes: fa06906a48 ("net/mlx5: fix IPIP multi-tunnel validation")
Cc: stable@dpdk.org

Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
2022-10-26 13:33:45 +02:00

19305 lines
575 KiB
C
Raw Blame History

/* SPDX-License-Identifier: BSD-3-Clause
* Copyright 2018 Mellanox Technologies, Ltd
*/
#include <sys/queue.h>
#include <stdalign.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h>
#include <rte_common.h>
#include <rte_ether.h>
#include <ethdev_driver.h>
#include <rte_flow.h>
#include <rte_flow_driver.h>
#include <rte_malloc.h>
#include <rte_cycles.h>
#include <bus_pci_driver.h>
#include <rte_ip.h>
#include <rte_gre.h>
#include <rte_vxlan.h>
#include <rte_gtp.h>
#include <rte_eal_paging.h>
#include <rte_mpls.h>
#include <rte_mtr.h>
#include <rte_mtr_driver.h>
#include <rte_tailq.h>
#include <mlx5_glue.h>
#include <mlx5_devx_cmds.h>
#include <mlx5_prm.h>
#include <mlx5_malloc.h>
#include "mlx5_defs.h"
#include "mlx5.h"
#include "mlx5_common_os.h"
#include "mlx5_flow.h"
#include "mlx5_flow_os.h"
#include "mlx5_rx.h"
#include "mlx5_tx.h"
#include "rte_pmd_mlx5.h"
#if defined(HAVE_IBV_FLOW_DV_SUPPORT) || !defined(HAVE_INFINIBAND_VERBS_H)
#ifndef HAVE_IBV_FLOW_DEVX_COUNTERS
#define MLX5DV_FLOW_ACTION_COUNTERS_DEVX 0
#endif
#ifndef HAVE_MLX5DV_DR_ESWITCH
#ifndef MLX5DV_FLOW_TABLE_TYPE_FDB
#define MLX5DV_FLOW_TABLE_TYPE_FDB 0
#endif
#endif
#ifndef HAVE_MLX5DV_DR
#define MLX5DV_DR_ACTION_FLAGS_ROOT_LEVEL 1
#endif
/* VLAN header definitions */
#define MLX5DV_FLOW_VLAN_PCP_SHIFT 13
#define MLX5DV_FLOW_VLAN_PCP_MASK (0x7 << MLX5DV_FLOW_VLAN_PCP_SHIFT)
#define MLX5DV_FLOW_VLAN_VID_MASK 0x0fff
#define MLX5DV_FLOW_VLAN_PCP_MASK_BE RTE_BE16(MLX5DV_FLOW_VLAN_PCP_MASK)
#define MLX5DV_FLOW_VLAN_VID_MASK_BE RTE_BE16(MLX5DV_FLOW_VLAN_VID_MASK)
#define MLX5_ITEM_VALID(item, key_type) \
(((MLX5_SET_MATCHER_SW & (key_type)) && !((item)->spec)) || \
((MLX5_SET_MATCHER_HS_V == (key_type)) && !((item)->spec)) || \
((MLX5_SET_MATCHER_HS_M == (key_type)) && !((item)->mask)))
#define MLX5_ITEM_UPDATE(item, key_type, v, m, gm) \
do { \
if ((key_type) == MLX5_SET_MATCHER_SW_V) { \
v = (item)->spec; \
m = (item)->mask ? (item)->mask : (gm); \
} else if ((key_type) == MLX5_SET_MATCHER_HS_V) { \
v = (item)->spec; \
m = (v); \
} else { \
v = (item)->mask ? (item)->mask : (gm); \
m = (v); \
} \
} while (0)
union flow_dv_attr {
struct {
uint32_t valid:1;
uint32_t ipv4:1;
uint32_t ipv6:1;
uint32_t tcp:1;
uint32_t udp:1;
uint32_t reserved:27;
};
uint32_t attr;
};
static int
flow_dv_encap_decap_resource_release(struct rte_eth_dev *dev,
uint32_t encap_decap_idx);
static int
flow_dv_port_id_action_resource_release(struct rte_eth_dev *dev,
uint32_t port_id);
static void
flow_dv_shared_rss_action_release(struct rte_eth_dev *dev, uint32_t srss);
static int
flow_dv_jump_tbl_resource_release(struct rte_eth_dev *dev,
uint32_t rix_jump);
/**
* Initialize flow attributes structure according to flow items' types.
*
* flow_dv_validate() avoids multiple L3/L4 layers cases other than tunnel
* mode. For tunnel mode, the items to be modified are the outermost ones.
*
* @param[in] item
* Pointer to item specification.
* @param[out] attr
* Pointer to flow attributes structure.
* @param[in] dev_flow
* Pointer to the sub flow.
* @param[in] tunnel_decap
* Whether action is after tunnel decapsulation.
*/
static void
flow_dv_attr_init(const struct rte_flow_item *item, union flow_dv_attr *attr,
struct mlx5_flow *dev_flow, bool tunnel_decap)
{
uint64_t layers = dev_flow->handle->layers;
bool tunnel_match = false;
/*
* If layers is already initialized, it means this dev_flow is the
* suffix flow, the layers flags is set by the prefix flow. Need to
* use the layer flags from prefix flow as the suffix flow may not
* have the user defined items as the flow is split.
*/
if (layers) {
if (tunnel_decap) {
/*
* If decap action before modify, it means the driver
* should take the inner as outer for the modify actions.
*/
layers = ((layers >> 6) & MLX5_FLOW_LAYER_OUTER);
}
if (layers & MLX5_FLOW_LAYER_OUTER_L3_IPV4)
attr->ipv4 = 1;
else if (layers & MLX5_FLOW_LAYER_OUTER_L3_IPV6)
attr->ipv6 = 1;
if (layers & MLX5_FLOW_LAYER_OUTER_L4_TCP)
attr->tcp = 1;
else if (layers & MLX5_FLOW_LAYER_OUTER_L4_UDP)
attr->udp = 1;
attr->valid = 1;
return;
}
for (; item->type != RTE_FLOW_ITEM_TYPE_END; item++) {
uint8_t next_protocol = 0xff;
switch (item->type) {
case RTE_FLOW_ITEM_TYPE_GRE:
case RTE_FLOW_ITEM_TYPE_NVGRE:
case RTE_FLOW_ITEM_TYPE_VXLAN:
case RTE_FLOW_ITEM_TYPE_VXLAN_GPE:
case RTE_FLOW_ITEM_TYPE_GENEVE:
case RTE_FLOW_ITEM_TYPE_MPLS:
case RTE_FLOW_ITEM_TYPE_GTP:
if (tunnel_decap) {
attr->attr = 0;
tunnel_match = true;
}
break;
case RTE_FLOW_ITEM_TYPE_IPV4:
if (!attr->ipv6)
attr->ipv4 = 1;
if (item->mask != NULL &&
((const struct rte_flow_item_ipv4 *)
item->mask)->hdr.next_proto_id)
next_protocol =
((const struct rte_flow_item_ipv4 *)
(item->spec))->hdr.next_proto_id &
((const struct rte_flow_item_ipv4 *)
(item->mask))->hdr.next_proto_id;
if ((next_protocol == IPPROTO_IPIP ||
next_protocol == IPPROTO_IPV6) && tunnel_decap &&
!tunnel_match)
attr->attr = 0;
break;
case RTE_FLOW_ITEM_TYPE_IPV6:
if (!attr->ipv4)
attr->ipv6 = 1;
if (item->mask != NULL &&
((const struct rte_flow_item_ipv6 *)
item->mask)->hdr.proto)
next_protocol =
((const struct rte_flow_item_ipv6 *)
(item->spec))->hdr.proto &
((const struct rte_flow_item_ipv6 *)
(item->mask))->hdr.proto;
if ((next_protocol == IPPROTO_IPIP ||
next_protocol == IPPROTO_IPV6) && tunnel_decap &&
!tunnel_match)
attr->attr = 0;
break;
case RTE_FLOW_ITEM_TYPE_UDP:
if (!attr->tcp)
attr->udp = 1;
break;
case RTE_FLOW_ITEM_TYPE_TCP:
if (!attr->udp)
attr->tcp = 1;
break;
default:
break;
}
}
attr->valid = 1;
}
struct field_modify_info modify_eth[] = {
{4, 0, MLX5_MODI_OUT_DMAC_47_16},
{2, 4, MLX5_MODI_OUT_DMAC_15_0},
{4, 6, MLX5_MODI_OUT_SMAC_47_16},
{2, 10, MLX5_MODI_OUT_SMAC_15_0},
{0, 0, 0},
};
struct field_modify_info modify_vlan_out_first_vid[] = {
/* Size in bits !!! */
{12, 0, MLX5_MODI_OUT_FIRST_VID},
{0, 0, 0},
};
struct field_modify_info modify_ipv4[] = {
{1, 1, MLX5_MODI_OUT_IP_DSCP},
{1, 8, MLX5_MODI_OUT_IPV4_TTL},
{4, 12, MLX5_MODI_OUT_SIPV4},
{4, 16, MLX5_MODI_OUT_DIPV4},
{0, 0, 0},
};
struct field_modify_info modify_ipv6[] = {
{1, 0, MLX5_MODI_OUT_IP_DSCP},
{1, 7, MLX5_MODI_OUT_IPV6_HOPLIMIT},
{4, 8, MLX5_MODI_OUT_SIPV6_127_96},
{4, 12, MLX5_MODI_OUT_SIPV6_95_64},
{4, 16, MLX5_MODI_OUT_SIPV6_63_32},
{4, 20, MLX5_MODI_OUT_SIPV6_31_0},
{4, 24, MLX5_MODI_OUT_DIPV6_127_96},
{4, 28, MLX5_MODI_OUT_DIPV6_95_64},
{4, 32, MLX5_MODI_OUT_DIPV6_63_32},
{4, 36, MLX5_MODI_OUT_DIPV6_31_0},
{0, 0, 0},
};
struct field_modify_info modify_udp[] = {
{2, 0, MLX5_MODI_OUT_UDP_SPORT},
{2, 2, MLX5_MODI_OUT_UDP_DPORT},
{0, 0, 0},
};
struct field_modify_info modify_tcp[] = {
{2, 0, MLX5_MODI_OUT_TCP_SPORT},
{2, 2, MLX5_MODI_OUT_TCP_DPORT},
{4, 4, MLX5_MODI_OUT_TCP_SEQ_NUM},
{4, 8, MLX5_MODI_OUT_TCP_ACK_NUM},
{0, 0, 0},
};
static void
mlx5_flow_tunnel_ip_check(const struct rte_flow_item *item __rte_unused,
uint8_t next_protocol, uint64_t *item_flags,
int *tunnel)
{
MLX5_ASSERT(item->type == RTE_FLOW_ITEM_TYPE_IPV4 ||
item->type == RTE_FLOW_ITEM_TYPE_IPV6);
if (next_protocol == IPPROTO_IPIP) {
*item_flags |= MLX5_FLOW_LAYER_IPIP;
*tunnel = 1;
}
if (next_protocol == IPPROTO_IPV6) {
*item_flags |= MLX5_FLOW_LAYER_IPV6_ENCAP;
*tunnel = 1;
}
}
static inline struct mlx5_hlist *
flow_dv_hlist_prepare(struct mlx5_dev_ctx_shared *sh, struct mlx5_hlist **phl,
const char *name, uint32_t size, bool direct_key,
bool lcores_share, void *ctx,
mlx5_list_create_cb cb_create,
mlx5_list_match_cb cb_match,
mlx5_list_remove_cb cb_remove,
mlx5_list_clone_cb cb_clone,
mlx5_list_clone_free_cb cb_clone_free,
struct rte_flow_error *error)
{
struct mlx5_hlist *hl;
struct mlx5_hlist *expected = NULL;
char s[MLX5_NAME_SIZE];
hl = __atomic_load_n(phl, __ATOMIC_SEQ_CST);
if (likely(hl))
return hl;
snprintf(s, sizeof(s), "%s_%s", sh->ibdev_name, name);
hl = mlx5_hlist_create(s, size, direct_key, lcores_share,
ctx, cb_create, cb_match, cb_remove, cb_clone,
cb_clone_free);
if (!hl) {
DRV_LOG(ERR, "%s hash creation failed", name);
rte_flow_error_set(error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"cannot allocate resource memory");
return NULL;
}
if (!__atomic_compare_exchange_n(phl, &expected, hl, false,
__ATOMIC_SEQ_CST,
__ATOMIC_SEQ_CST)) {
mlx5_hlist_destroy(hl);
hl = __atomic_load_n(phl, __ATOMIC_SEQ_CST);
}
return hl;
}
/* Update VLAN's VID/PCP based on input rte_flow_action.
*
* @param[in] action
* Pointer to struct rte_flow_action.
* @param[out] vlan
* Pointer to struct rte_vlan_hdr.
*/
static void
mlx5_update_vlan_vid_pcp(const struct rte_flow_action *action,
struct rte_vlan_hdr *vlan)
{
uint16_t vlan_tci;
if (action->type == RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP) {
vlan_tci =
((const struct rte_flow_action_of_set_vlan_pcp *)
action->conf)->vlan_pcp;
vlan_tci = vlan_tci << MLX5DV_FLOW_VLAN_PCP_SHIFT;
vlan->vlan_tci &= ~MLX5DV_FLOW_VLAN_PCP_MASK;
vlan->vlan_tci |= vlan_tci;
} else if (action->type == RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID) {
vlan->vlan_tci &= ~MLX5DV_FLOW_VLAN_VID_MASK;
vlan->vlan_tci |= rte_be_to_cpu_16
(((const struct rte_flow_action_of_set_vlan_vid *)
action->conf)->vlan_vid);
}
}
/**
* Convert modify-header action to DV specification.
*
* Data length of each action is determined by provided field description
* and the item mask. Data bit offset and width of each action is determined
* by provided item mask.
*
* @param[in] item
* Pointer to item specification.
* @param[in] field
* Pointer to field modification information.
* For MLX5_MODIFICATION_TYPE_SET specifies destination field.
* For MLX5_MODIFICATION_TYPE_ADD specifies destination field.
* For MLX5_MODIFICATION_TYPE_COPY specifies source field.
* @param[in] dcopy
* Destination field info for MLX5_MODIFICATION_TYPE_COPY in @type.
* Negative offset value sets the same offset as source offset.
* size field is ignored, value is taken from source field.
* @param[in,out] resource
* Pointer to the modify-header resource.
* @param[in] type
* Type of modification.
* @param[out] error
* Pointer to the error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
flow_dv_convert_modify_action(struct rte_flow_item *item,
struct field_modify_info *field,
struct field_modify_info *dcopy,
struct mlx5_flow_dv_modify_hdr_resource *resource,
uint32_t type, struct rte_flow_error *error)
{
uint32_t i = resource->actions_num;
struct mlx5_modification_cmd *actions = resource->actions;
uint32_t carry_b = 0;
/*
* The item and mask are provided in big-endian format.
* The fields should be presented as in big-endian format either.
* Mask must be always present, it defines the actual field width.
*/
MLX5_ASSERT(item->mask);
MLX5_ASSERT(field->size);
do {
uint32_t size_b;
uint32_t off_b;
uint32_t mask;
uint32_t data;
bool next_field = true;
bool next_dcopy = true;
if (i >= MLX5_MAX_MODIFY_NUM)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"too many items to modify");
/* Fetch variable byte size mask from the array. */
mask = flow_dv_fetch_field((const uint8_t *)item->mask +
field->offset, field->size);
if (!mask) {
++field;
continue;
}
/* Deduce actual data width in bits from mask value. */
off_b = rte_bsf32(mask) + carry_b;
size_b = sizeof(uint32_t) * CHAR_BIT -
off_b - __builtin_clz(mask);
MLX5_ASSERT(size_b);
actions[i] = (struct mlx5_modification_cmd) {
.action_type = type,
.field = field->id,
.offset = off_b,
.length = (size_b == sizeof(uint32_t) * CHAR_BIT) ?
0 : size_b,
};
if (type == MLX5_MODIFICATION_TYPE_COPY) {
MLX5_ASSERT(dcopy);
actions[i].dst_field = dcopy->id;
actions[i].dst_offset =
(int)dcopy->offset < 0 ? off_b : dcopy->offset;
/* Convert entire record to big-endian format. */
actions[i].data1 = rte_cpu_to_be_32(actions[i].data1);
/*
* Destination field overflow. Copy leftovers of
* a source field to the next destination field.
*/
carry_b = 0;
if ((size_b > dcopy->size * CHAR_BIT - dcopy->offset) &&
dcopy->size != 0) {
actions[i].length =
dcopy->size * CHAR_BIT - dcopy->offset;
carry_b = actions[i].length;
next_field = false;
}
/*
* Not enough bits in a source filed to fill a
* destination field. Switch to the next source.
*/
if ((size_b < dcopy->size * CHAR_BIT - dcopy->offset) &&
(size_b == field->size * CHAR_BIT - off_b)) {
actions[i].length =
field->size * CHAR_BIT - off_b;
dcopy->offset += actions[i].length;
next_dcopy = false;
}
if (next_dcopy)
++dcopy;
} else {
MLX5_ASSERT(item->spec);
data = flow_dv_fetch_field((const uint8_t *)item->spec +
field->offset, field->size);
/* Shift out the trailing masked bits from data. */
data = (data & mask) >> off_b;
actions[i].data1 = rte_cpu_to_be_32(data);
}
/* Convert entire record to expected big-endian format. */
actions[i].data0 = rte_cpu_to_be_32(actions[i].data0);
if (next_field)
++field;
++i;
} while (field->size);
if (resource->actions_num == i)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"invalid modification flow item");
resource->actions_num = i;
return 0;
}
/**
* Convert modify-header set IPv4 address action to DV specification.
*
* @param[in,out] resource
* Pointer to the modify-header resource.
* @param[in] action
* Pointer to action specification.
* @param[out] error
* Pointer to the error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_convert_action_modify_ipv4
(struct mlx5_flow_dv_modify_hdr_resource *resource,
const struct rte_flow_action *action,
struct rte_flow_error *error)
{
const struct rte_flow_action_set_ipv4 *conf =
(const struct rte_flow_action_set_ipv4 *)(action->conf);
struct rte_flow_item item = { .type = RTE_FLOW_ITEM_TYPE_IPV4 };
struct rte_flow_item_ipv4 ipv4;
struct rte_flow_item_ipv4 ipv4_mask;
memset(&ipv4, 0, sizeof(ipv4));
memset(&ipv4_mask, 0, sizeof(ipv4_mask));
if (action->type == RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC) {
ipv4.hdr.src_addr = conf->ipv4_addr;
ipv4_mask.hdr.src_addr = rte_flow_item_ipv4_mask.hdr.src_addr;
} else {
ipv4.hdr.dst_addr = conf->ipv4_addr;
ipv4_mask.hdr.dst_addr = rte_flow_item_ipv4_mask.hdr.dst_addr;
}
item.spec = &ipv4;
item.mask = &ipv4_mask;
return flow_dv_convert_modify_action(&item, modify_ipv4, NULL, resource,
MLX5_MODIFICATION_TYPE_SET, error);
}
/**
* Convert modify-header set IPv6 address action to DV specification.
*
* @param[in,out] resource
* Pointer to the modify-header resource.
* @param[in] action
* Pointer to action specification.
* @param[out] error
* Pointer to the error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_convert_action_modify_ipv6
(struct mlx5_flow_dv_modify_hdr_resource *resource,
const struct rte_flow_action *action,
struct rte_flow_error *error)
{
const struct rte_flow_action_set_ipv6 *conf =
(const struct rte_flow_action_set_ipv6 *)(action->conf);
struct rte_flow_item item = { .type = RTE_FLOW_ITEM_TYPE_IPV6 };
struct rte_flow_item_ipv6 ipv6;
struct rte_flow_item_ipv6 ipv6_mask;
memset(&ipv6, 0, sizeof(ipv6));
memset(&ipv6_mask, 0, sizeof(ipv6_mask));
if (action->type == RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC) {
memcpy(&ipv6.hdr.src_addr, &conf->ipv6_addr,
sizeof(ipv6.hdr.src_addr));
memcpy(&ipv6_mask.hdr.src_addr,
&rte_flow_item_ipv6_mask.hdr.src_addr,
sizeof(ipv6.hdr.src_addr));
} else {
memcpy(&ipv6.hdr.dst_addr, &conf->ipv6_addr,
sizeof(ipv6.hdr.dst_addr));
memcpy(&ipv6_mask.hdr.dst_addr,
&rte_flow_item_ipv6_mask.hdr.dst_addr,
sizeof(ipv6.hdr.dst_addr));
}
item.spec = &ipv6;
item.mask = &ipv6_mask;
return flow_dv_convert_modify_action(&item, modify_ipv6, NULL, resource,
MLX5_MODIFICATION_TYPE_SET, error);
}
/**
* Convert modify-header set MAC address action to DV specification.
*
* @param[in,out] resource
* Pointer to the modify-header resource.
* @param[in] action
* Pointer to action specification.
* @param[out] error
* Pointer to the error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_convert_action_modify_mac
(struct mlx5_flow_dv_modify_hdr_resource *resource,
const struct rte_flow_action *action,
struct rte_flow_error *error)
{
const struct rte_flow_action_set_mac *conf =
(const struct rte_flow_action_set_mac *)(action->conf);
struct rte_flow_item item = { .type = RTE_FLOW_ITEM_TYPE_ETH };
struct rte_flow_item_eth eth;
struct rte_flow_item_eth eth_mask;
memset(&eth, 0, sizeof(eth));
memset(&eth_mask, 0, sizeof(eth_mask));
if (action->type == RTE_FLOW_ACTION_TYPE_SET_MAC_SRC) {
memcpy(&eth.src.addr_bytes, &conf->mac_addr,
sizeof(eth.src.addr_bytes));
memcpy(&eth_mask.src.addr_bytes,
&rte_flow_item_eth_mask.src.addr_bytes,
sizeof(eth_mask.src.addr_bytes));
} else {
memcpy(&eth.dst.addr_bytes, &conf->mac_addr,
sizeof(eth.dst.addr_bytes));
memcpy(&eth_mask.dst.addr_bytes,
&rte_flow_item_eth_mask.dst.addr_bytes,
sizeof(eth_mask.dst.addr_bytes));
}
item.spec = &eth;
item.mask = &eth_mask;
return flow_dv_convert_modify_action(&item, modify_eth, NULL, resource,
MLX5_MODIFICATION_TYPE_SET, error);
}
/**
* Convert modify-header set VLAN VID action to DV specification.
*
* @param[in,out] resource
* Pointer to the modify-header resource.
* @param[in] action
* Pointer to action specification.
* @param[out] error
* Pointer to the error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_convert_action_modify_vlan_vid
(struct mlx5_flow_dv_modify_hdr_resource *resource,
const struct rte_flow_action *action,
struct rte_flow_error *error)
{
const struct rte_flow_action_of_set_vlan_vid *conf =
(const struct rte_flow_action_of_set_vlan_vid *)(action->conf);
int i = resource->actions_num;
struct mlx5_modification_cmd *actions = resource->actions;
struct field_modify_info *field = modify_vlan_out_first_vid;
if (i >= MLX5_MAX_MODIFY_NUM)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"too many items to modify");
actions[i] = (struct mlx5_modification_cmd) {
.action_type = MLX5_MODIFICATION_TYPE_SET,
.field = field->id,
.length = field->size,
.offset = field->offset,
};
actions[i].data0 = rte_cpu_to_be_32(actions[i].data0);
actions[i].data1 = conf->vlan_vid;
actions[i].data1 = actions[i].data1 << 16;
resource->actions_num = ++i;
return 0;
}
/**
* Convert modify-header set TP action to DV specification.
*
* @param[in,out] resource
* Pointer to the modify-header resource.
* @param[in] action
* Pointer to action specification.
* @param[in] items
* Pointer to rte_flow_item objects list.
* @param[in] attr
* Pointer to flow attributes structure.
* @param[in] dev_flow
* Pointer to the sub flow.
* @param[in] tunnel_decap
* Whether action is after tunnel decapsulation.
* @param[out] error
* Pointer to the error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_convert_action_modify_tp
(struct mlx5_flow_dv_modify_hdr_resource *resource,
const struct rte_flow_action *action,
const struct rte_flow_item *items,
union flow_dv_attr *attr, struct mlx5_flow *dev_flow,
bool tunnel_decap, struct rte_flow_error *error)
{
const struct rte_flow_action_set_tp *conf =
(const struct rte_flow_action_set_tp *)(action->conf);
struct rte_flow_item item;
struct rte_flow_item_udp udp;
struct rte_flow_item_udp udp_mask;
struct rte_flow_item_tcp tcp;
struct rte_flow_item_tcp tcp_mask;
struct field_modify_info *field;
if (!attr->valid)
flow_dv_attr_init(items, attr, dev_flow, tunnel_decap);
if (attr->udp) {
memset(&udp, 0, sizeof(udp));
memset(&udp_mask, 0, sizeof(udp_mask));
if (action->type == RTE_FLOW_ACTION_TYPE_SET_TP_SRC) {
udp.hdr.src_port = conf->port;
udp_mask.hdr.src_port =
rte_flow_item_udp_mask.hdr.src_port;
} else {
udp.hdr.dst_port = conf->port;
udp_mask.hdr.dst_port =
rte_flow_item_udp_mask.hdr.dst_port;
}
item.type = RTE_FLOW_ITEM_TYPE_UDP;
item.spec = &udp;
item.mask = &udp_mask;
field = modify_udp;
} else {
MLX5_ASSERT(attr->tcp);
memset(&tcp, 0, sizeof(tcp));
memset(&tcp_mask, 0, sizeof(tcp_mask));
if (action->type == RTE_FLOW_ACTION_TYPE_SET_TP_SRC) {
tcp.hdr.src_port = conf->port;
tcp_mask.hdr.src_port =
rte_flow_item_tcp_mask.hdr.src_port;
} else {
tcp.hdr.dst_port = conf->port;
tcp_mask.hdr.dst_port =
rte_flow_item_tcp_mask.hdr.dst_port;
}
item.type = RTE_FLOW_ITEM_TYPE_TCP;
item.spec = &tcp;
item.mask = &tcp_mask;
field = modify_tcp;
}
return flow_dv_convert_modify_action(&item, field, NULL, resource,
MLX5_MODIFICATION_TYPE_SET, error);
}
/**
* Convert modify-header set TTL action to DV specification.
*
* @param[in,out] resource
* Pointer to the modify-header resource.
* @param[in] action
* Pointer to action specification.
* @param[in] items
* Pointer to rte_flow_item objects list.
* @param[in] attr
* Pointer to flow attributes structure.
* @param[in] dev_flow
* Pointer to the sub flow.
* @param[in] tunnel_decap
* Whether action is after tunnel decapsulation.
* @param[out] error
* Pointer to the error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_convert_action_modify_ttl
(struct mlx5_flow_dv_modify_hdr_resource *resource,
const struct rte_flow_action *action,
const struct rte_flow_item *items,
union flow_dv_attr *attr, struct mlx5_flow *dev_flow,
bool tunnel_decap, struct rte_flow_error *error)
{
const struct rte_flow_action_set_ttl *conf =
(const struct rte_flow_action_set_ttl *)(action->conf);
struct rte_flow_item item;
struct rte_flow_item_ipv4 ipv4;
struct rte_flow_item_ipv4 ipv4_mask;
struct rte_flow_item_ipv6 ipv6;
struct rte_flow_item_ipv6 ipv6_mask;
struct field_modify_info *field;
if (!attr->valid)
flow_dv_attr_init(items, attr, dev_flow, tunnel_decap);
if (attr->ipv4) {
memset(&ipv4, 0, sizeof(ipv4));
memset(&ipv4_mask, 0, sizeof(ipv4_mask));
ipv4.hdr.time_to_live = conf->ttl_value;
ipv4_mask.hdr.time_to_live = 0xFF;
item.type = RTE_FLOW_ITEM_TYPE_IPV4;
item.spec = &ipv4;
item.mask = &ipv4_mask;
field = modify_ipv4;
} else {
MLX5_ASSERT(attr->ipv6);
memset(&ipv6, 0, sizeof(ipv6));
memset(&ipv6_mask, 0, sizeof(ipv6_mask));
ipv6.hdr.hop_limits = conf->ttl_value;
ipv6_mask.hdr.hop_limits = 0xFF;
item.type = RTE_FLOW_ITEM_TYPE_IPV6;
item.spec = &ipv6;
item.mask = &ipv6_mask;
field = modify_ipv6;
}
return flow_dv_convert_modify_action(&item, field, NULL, resource,
MLX5_MODIFICATION_TYPE_SET, error);
}
/**
* Convert modify-header decrement TTL action to DV specification.
*
* @param[in,out] resource
* Pointer to the modify-header resource.
* @param[in] action
* Pointer to action specification.
* @param[in] items
* Pointer to rte_flow_item objects list.
* @param[in] attr
* Pointer to flow attributes structure.
* @param[in] dev_flow
* Pointer to the sub flow.
* @param[in] tunnel_decap
* Whether action is after tunnel decapsulation.
* @param[out] error
* Pointer to the error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_convert_action_modify_dec_ttl
(struct mlx5_flow_dv_modify_hdr_resource *resource,
const struct rte_flow_item *items,
union flow_dv_attr *attr, struct mlx5_flow *dev_flow,
bool tunnel_decap, struct rte_flow_error *error)
{
struct rte_flow_item item;
struct rte_flow_item_ipv4 ipv4;
struct rte_flow_item_ipv4 ipv4_mask;
struct rte_flow_item_ipv6 ipv6;
struct rte_flow_item_ipv6 ipv6_mask;
struct field_modify_info *field;
if (!attr->valid)
flow_dv_attr_init(items, attr, dev_flow, tunnel_decap);
if (attr->ipv4) {
memset(&ipv4, 0, sizeof(ipv4));
memset(&ipv4_mask, 0, sizeof(ipv4_mask));
ipv4.hdr.time_to_live = 0xFF;
ipv4_mask.hdr.time_to_live = 0xFF;
item.type = RTE_FLOW_ITEM_TYPE_IPV4;
item.spec = &ipv4;
item.mask = &ipv4_mask;
field = modify_ipv4;
} else {
MLX5_ASSERT(attr->ipv6);
memset(&ipv6, 0, sizeof(ipv6));
memset(&ipv6_mask, 0, sizeof(ipv6_mask));
ipv6.hdr.hop_limits = 0xFF;
ipv6_mask.hdr.hop_limits = 0xFF;
item.type = RTE_FLOW_ITEM_TYPE_IPV6;
item.spec = &ipv6;
item.mask = &ipv6_mask;
field = modify_ipv6;
}
return flow_dv_convert_modify_action(&item, field, NULL, resource,
MLX5_MODIFICATION_TYPE_ADD, error);
}
/**
* Convert modify-header increment/decrement TCP Sequence number
* to DV specification.
*
* @param[in,out] resource
* Pointer to the modify-header resource.
* @param[in] action
* Pointer to action specification.
* @param[out] error
* Pointer to the error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_convert_action_modify_tcp_seq
(struct mlx5_flow_dv_modify_hdr_resource *resource,
const struct rte_flow_action *action,
struct rte_flow_error *error)
{
const rte_be32_t *conf = (const rte_be32_t *)(action->conf);
uint64_t value = rte_be_to_cpu_32(*conf);
struct rte_flow_item item;
struct rte_flow_item_tcp tcp;
struct rte_flow_item_tcp tcp_mask;
memset(&tcp, 0, sizeof(tcp));
memset(&tcp_mask, 0, sizeof(tcp_mask));
if (action->type == RTE_FLOW_ACTION_TYPE_DEC_TCP_SEQ)
/*
* The HW has no decrement operation, only increment operation.
* To simulate decrement X from Y using increment operation
* we need to add UINT32_MAX X times to Y.
* Each adding of UINT32_MAX decrements Y by 1.
*/
value *= UINT32_MAX;
tcp.hdr.sent_seq = rte_cpu_to_be_32((uint32_t)value);
tcp_mask.hdr.sent_seq = RTE_BE32(UINT32_MAX);
item.type = RTE_FLOW_ITEM_TYPE_TCP;
item.spec = &tcp;
item.mask = &tcp_mask;
return flow_dv_convert_modify_action(&item, modify_tcp, NULL, resource,
MLX5_MODIFICATION_TYPE_ADD, error);
}
/**
* Convert modify-header increment/decrement TCP Acknowledgment number
* to DV specification.
*
* @param[in,out] resource
* Pointer to the modify-header resource.
* @param[in] action
* Pointer to action specification.
* @param[out] error
* Pointer to the error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_convert_action_modify_tcp_ack
(struct mlx5_flow_dv_modify_hdr_resource *resource,
const struct rte_flow_action *action,
struct rte_flow_error *error)
{
const rte_be32_t *conf = (const rte_be32_t *)(action->conf);
uint64_t value = rte_be_to_cpu_32(*conf);
struct rte_flow_item item;
struct rte_flow_item_tcp tcp;
struct rte_flow_item_tcp tcp_mask;
memset(&tcp, 0, sizeof(tcp));
memset(&tcp_mask, 0, sizeof(tcp_mask));
if (action->type == RTE_FLOW_ACTION_TYPE_DEC_TCP_ACK)
/*
* The HW has no decrement operation, only increment operation.
* To simulate decrement X from Y using increment operation
* we need to add UINT32_MAX X times to Y.
* Each adding of UINT32_MAX decrements Y by 1.
*/
value *= UINT32_MAX;
tcp.hdr.recv_ack = rte_cpu_to_be_32((uint32_t)value);
tcp_mask.hdr.recv_ack = RTE_BE32(UINT32_MAX);
item.type = RTE_FLOW_ITEM_TYPE_TCP;
item.spec = &tcp;
item.mask = &tcp_mask;
return flow_dv_convert_modify_action(&item, modify_tcp, NULL, resource,
MLX5_MODIFICATION_TYPE_ADD, error);
}
static enum mlx5_modification_field reg_to_field[] = {
[REG_NON] = MLX5_MODI_OUT_NONE,
[REG_A] = MLX5_MODI_META_DATA_REG_A,
[REG_B] = MLX5_MODI_META_DATA_REG_B,
[REG_C_0] = MLX5_MODI_META_REG_C_0,
[REG_C_1] = MLX5_MODI_META_REG_C_1,
[REG_C_2] = MLX5_MODI_META_REG_C_2,
[REG_C_3] = MLX5_MODI_META_REG_C_3,
[REG_C_4] = MLX5_MODI_META_REG_C_4,
[REG_C_5] = MLX5_MODI_META_REG_C_5,
[REG_C_6] = MLX5_MODI_META_REG_C_6,
[REG_C_7] = MLX5_MODI_META_REG_C_7,
};
/**
* Convert register set to DV specification.
*
* @param[in,out] resource
* Pointer to the modify-header resource.
* @param[in] action
* Pointer to action specification.
* @param[out] error
* Pointer to the error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_convert_action_set_reg
(struct mlx5_flow_dv_modify_hdr_resource *resource,
const struct rte_flow_action *action,
struct rte_flow_error *error)
{
const struct mlx5_rte_flow_action_set_tag *conf = action->conf;
struct mlx5_modification_cmd *actions = resource->actions;
uint32_t i = resource->actions_num;
if (i >= MLX5_MAX_MODIFY_NUM)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"too many items to modify");
MLX5_ASSERT(conf->id != REG_NON);
MLX5_ASSERT(conf->id < (enum modify_reg)RTE_DIM(reg_to_field));
actions[i] = (struct mlx5_modification_cmd) {
.action_type = MLX5_MODIFICATION_TYPE_SET,
.field = reg_to_field[conf->id],
.offset = conf->offset,
.length = conf->length,
};
actions[i].data0 = rte_cpu_to_be_32(actions[i].data0);
actions[i].data1 = rte_cpu_to_be_32(conf->data);
++i;
resource->actions_num = i;
return 0;
}
/**
* Convert SET_TAG action to DV specification.
*
* @param[in] dev
* Pointer to the rte_eth_dev structure.
* @param[in,out] resource
* Pointer to the modify-header resource.
* @param[in] conf
* Pointer to action specification.
* @param[out] error
* Pointer to the error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_convert_action_set_tag
(struct rte_eth_dev *dev,
struct mlx5_flow_dv_modify_hdr_resource *resource,
const struct rte_flow_action_set_tag *conf,
struct rte_flow_error *error)
{
rte_be32_t data = rte_cpu_to_be_32(conf->data);
rte_be32_t mask = rte_cpu_to_be_32(conf->mask);
struct rte_flow_item item = {
.spec = &data,
.mask = &mask,
};
struct field_modify_info reg_c_x[] = {
[1] = {0, 0, 0},
};
enum mlx5_modification_field reg_type;
int ret;
ret = mlx5_flow_get_reg_id(dev, MLX5_APP_TAG, conf->index, error);
if (ret < 0)
return ret;
MLX5_ASSERT(ret != REG_NON);
MLX5_ASSERT((unsigned int)ret < RTE_DIM(reg_to_field));
reg_type = reg_to_field[ret];
MLX5_ASSERT(reg_type > 0);
reg_c_x[0] = (struct field_modify_info){4, 0, reg_type};
return flow_dv_convert_modify_action(&item, reg_c_x, NULL, resource,
MLX5_MODIFICATION_TYPE_SET, error);
}
/**
* Convert internal COPY_REG action to DV specification.
*
* @param[in] dev
* Pointer to the rte_eth_dev structure.
* @param[in,out] res
* Pointer to the modify-header resource.
* @param[in] action
* Pointer to action specification.
* @param[out] error
* Pointer to the error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_convert_action_copy_mreg(struct rte_eth_dev *dev,
struct mlx5_flow_dv_modify_hdr_resource *res,
const struct rte_flow_action *action,
struct rte_flow_error *error)
{
const struct mlx5_flow_action_copy_mreg *conf = action->conf;
rte_be32_t mask = RTE_BE32(UINT32_MAX);
struct rte_flow_item item = {
.spec = NULL,
.mask = &mask,
};
struct field_modify_info reg_src[] = {
{4, 0, reg_to_field[conf->src]},
{0, 0, 0},
};
struct field_modify_info reg_dst = {
.offset = 0,
.id = reg_to_field[conf->dst],
};
/* Adjust reg_c[0] usage according to reported mask. */
if (conf->dst == REG_C_0 || conf->src == REG_C_0) {
struct mlx5_priv *priv = dev->data->dev_private;
uint32_t reg_c0 = priv->sh->dv_regc0_mask;
MLX5_ASSERT(reg_c0);
MLX5_ASSERT(priv->sh->config.dv_xmeta_en !=
MLX5_XMETA_MODE_LEGACY);
if (conf->dst == REG_C_0) {
/* Copy to reg_c[0], within mask only. */
reg_dst.offset = rte_bsf32(reg_c0);
mask = rte_cpu_to_be_32(reg_c0 >> reg_dst.offset);
} else {
reg_dst.offset = 0;
mask = rte_cpu_to_be_32(reg_c0);
}
}
return flow_dv_convert_modify_action(&item,
reg_src, &reg_dst, res,
MLX5_MODIFICATION_TYPE_COPY,
error);
}
/**
* Convert MARK action to DV specification. This routine is used
* in extensive metadata only and requires metadata register to be
* handled. In legacy mode hardware tag resource is engaged.
*
* @param[in] dev
* Pointer to the rte_eth_dev structure.
* @param[in] conf
* Pointer to MARK action specification.
* @param[in,out] resource
* Pointer to the modify-header resource.
* @param[out] error
* Pointer to the error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_convert_action_mark(struct rte_eth_dev *dev,
const struct rte_flow_action_mark *conf,
struct mlx5_flow_dv_modify_hdr_resource *resource,
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
rte_be32_t mask = rte_cpu_to_be_32(MLX5_FLOW_MARK_MASK &
priv->sh->dv_mark_mask);
rte_be32_t data = rte_cpu_to_be_32(conf->id) & mask;
struct rte_flow_item item = {
.spec = &data,
.mask = &mask,
};
struct field_modify_info reg_c_x[] = {
[1] = {0, 0, 0},
};
int reg;
if (!mask)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION_CONF,
NULL, "zero mark action mask");
reg = mlx5_flow_get_reg_id(dev, MLX5_FLOW_MARK, 0, error);
if (reg < 0)
return reg;
MLX5_ASSERT(reg > 0);
if (reg == REG_C_0) {
uint32_t msk_c0 = priv->sh->dv_regc0_mask;
uint32_t shl_c0 = rte_bsf32(msk_c0);
data = rte_cpu_to_be_32(rte_cpu_to_be_32(data) << shl_c0);
mask = rte_cpu_to_be_32(mask) & msk_c0;
mask = rte_cpu_to_be_32(mask << shl_c0);
}
reg_c_x[0] = (struct field_modify_info){4, 0, reg_to_field[reg]};
return flow_dv_convert_modify_action(&item, reg_c_x, NULL, resource,
MLX5_MODIFICATION_TYPE_SET, error);
}
/**
* Get metadata register index for specified steering domain.
*
* @param[in] dev
* Pointer to the rte_eth_dev structure.
* @param[in] attr
* Attributes of flow to determine steering domain.
* @param[out] error
* Pointer to the error structure.
*
* @return
* positive index on success, a negative errno value otherwise
* and rte_errno is set.
*/
static enum modify_reg
flow_dv_get_metadata_reg(struct rte_eth_dev *dev,
const struct rte_flow_attr *attr,
struct rte_flow_error *error)
{
int reg =
mlx5_flow_get_reg_id(dev, attr->transfer ?
MLX5_METADATA_FDB :
attr->egress ?
MLX5_METADATA_TX :
MLX5_METADATA_RX, 0, error);
if (reg < 0)
return rte_flow_error_set(error,
ENOTSUP, RTE_FLOW_ERROR_TYPE_ITEM,
NULL, "unavailable "
"metadata register");
return reg;
}
/**
* Convert SET_META action to DV specification.
*
* @param[in] dev
* Pointer to the rte_eth_dev structure.
* @param[in,out] resource
* Pointer to the modify-header resource.
* @param[in] attr
* Attributes of flow that includes this item.
* @param[in] conf
* Pointer to action specification.
* @param[out] error
* Pointer to the error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_convert_action_set_meta
(struct rte_eth_dev *dev,
struct mlx5_flow_dv_modify_hdr_resource *resource,
const struct rte_flow_attr *attr,
const struct rte_flow_action_set_meta *conf,
struct rte_flow_error *error)
{
uint32_t mask = rte_cpu_to_be_32(conf->mask);
uint32_t data = rte_cpu_to_be_32(conf->data) & mask;
struct rte_flow_item item = {
.spec = &data,
.mask = &mask,
};
struct field_modify_info reg_c_x[] = {
[1] = {0, 0, 0},
};
int reg = flow_dv_get_metadata_reg(dev, attr, error);
if (reg < 0)
return reg;
MLX5_ASSERT(reg != REG_NON);
if (reg == REG_C_0) {
struct mlx5_priv *priv = dev->data->dev_private;
uint32_t msk_c0 = priv->sh->dv_regc0_mask;
uint32_t shl_c0 = rte_bsf32(msk_c0);
data = rte_cpu_to_be_32(rte_cpu_to_be_32(data) << shl_c0);
mask = rte_cpu_to_be_32(mask) & msk_c0;
mask = rte_cpu_to_be_32(mask << shl_c0);
}
reg_c_x[0] = (struct field_modify_info){4, 0, reg_to_field[reg]};
/* The routine expects parameters in memory as big-endian ones. */
return flow_dv_convert_modify_action(&item, reg_c_x, NULL, resource,
MLX5_MODIFICATION_TYPE_SET, error);
}
/**
* Convert modify-header set IPv4 DSCP action to DV specification.
*
* @param[in,out] resource
* Pointer to the modify-header resource.
* @param[in] action
* Pointer to action specification.
* @param[out] error
* Pointer to the error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_convert_action_modify_ipv4_dscp
(struct mlx5_flow_dv_modify_hdr_resource *resource,
const struct rte_flow_action *action,
struct rte_flow_error *error)
{
const struct rte_flow_action_set_dscp *conf =
(const struct rte_flow_action_set_dscp *)(action->conf);
struct rte_flow_item item = { .type = RTE_FLOW_ITEM_TYPE_IPV4 };
struct rte_flow_item_ipv4 ipv4;
struct rte_flow_item_ipv4 ipv4_mask;
memset(&ipv4, 0, sizeof(ipv4));
memset(&ipv4_mask, 0, sizeof(ipv4_mask));
ipv4.hdr.type_of_service = conf->dscp;
ipv4_mask.hdr.type_of_service = RTE_IPV4_HDR_DSCP_MASK >> 2;
item.spec = &ipv4;
item.mask = &ipv4_mask;
return flow_dv_convert_modify_action(&item, modify_ipv4, NULL, resource,
MLX5_MODIFICATION_TYPE_SET, error);
}
/**
* Convert modify-header set IPv6 DSCP action to DV specification.
*
* @param[in,out] resource
* Pointer to the modify-header resource.
* @param[in] action
* Pointer to action specification.
* @param[out] error
* Pointer to the error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_convert_action_modify_ipv6_dscp
(struct mlx5_flow_dv_modify_hdr_resource *resource,
const struct rte_flow_action *action,
struct rte_flow_error *error)
{
const struct rte_flow_action_set_dscp *conf =
(const struct rte_flow_action_set_dscp *)(action->conf);
struct rte_flow_item item = { .type = RTE_FLOW_ITEM_TYPE_IPV6 };
struct rte_flow_item_ipv6 ipv6;
struct rte_flow_item_ipv6 ipv6_mask;
memset(&ipv6, 0, sizeof(ipv6));
memset(&ipv6_mask, 0, sizeof(ipv6_mask));
/*
* Even though the DSCP bits offset of IPv6 is not byte aligned,
* rdma-core only accept the DSCP bits byte aligned start from
* bit 0 to 5 as to be compatible with IPv4. No need to shift the
* bits in IPv6 case as rdma-core requires byte aligned value.
*/
ipv6.hdr.vtc_flow = conf->dscp;
ipv6_mask.hdr.vtc_flow = RTE_IPV6_HDR_DSCP_MASK >> 22;
item.spec = &ipv6;
item.mask = &ipv6_mask;
return flow_dv_convert_modify_action(&item, modify_ipv6, NULL, resource,
MLX5_MODIFICATION_TYPE_SET, error);
}
int
mlx5_flow_item_field_width(struct rte_eth_dev *dev,
enum rte_flow_field_id field, int inherit,
const struct rte_flow_attr *attr,
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
switch (field) {
case RTE_FLOW_FIELD_START:
return 32;
case RTE_FLOW_FIELD_MAC_DST:
case RTE_FLOW_FIELD_MAC_SRC:
return 48;
case RTE_FLOW_FIELD_VLAN_TYPE:
return 16;
case RTE_FLOW_FIELD_VLAN_ID:
return 12;
case RTE_FLOW_FIELD_MAC_TYPE:
return 16;
case RTE_FLOW_FIELD_IPV4_DSCP:
return 6;
case RTE_FLOW_FIELD_IPV4_TTL:
return 8;
case RTE_FLOW_FIELD_IPV4_SRC:
case RTE_FLOW_FIELD_IPV4_DST:
return 32;
case RTE_FLOW_FIELD_IPV6_DSCP:
return 6;
case RTE_FLOW_FIELD_IPV6_HOPLIMIT:
return 8;
case RTE_FLOW_FIELD_IPV6_SRC:
case RTE_FLOW_FIELD_IPV6_DST:
return 128;
case RTE_FLOW_FIELD_TCP_PORT_SRC:
case RTE_FLOW_FIELD_TCP_PORT_DST:
return 16;
case RTE_FLOW_FIELD_TCP_SEQ_NUM:
case RTE_FLOW_FIELD_TCP_ACK_NUM:
return 32;
case RTE_FLOW_FIELD_TCP_FLAGS:
return 9;
case RTE_FLOW_FIELD_UDP_PORT_SRC:
case RTE_FLOW_FIELD_UDP_PORT_DST:
return 16;
case RTE_FLOW_FIELD_VXLAN_VNI:
case RTE_FLOW_FIELD_GENEVE_VNI:
return 24;
case RTE_FLOW_FIELD_GTP_TEID:
case RTE_FLOW_FIELD_TAG:
return 32;
case RTE_FLOW_FIELD_MARK:
return __builtin_popcount(priv->sh->dv_mark_mask);
case RTE_FLOW_FIELD_META:
return (flow_dv_get_metadata_reg(dev, attr, error) == REG_C_0) ?
__builtin_popcount(priv->sh->dv_meta_mask) : 32;
case RTE_FLOW_FIELD_POINTER:
case RTE_FLOW_FIELD_VALUE:
return inherit < 0 ? 0 : inherit;
case RTE_FLOW_FIELD_IPV4_ECN:
case RTE_FLOW_FIELD_IPV6_ECN:
case RTE_FLOW_FIELD_METER_COLOR:
return 2;
default:
MLX5_ASSERT(false);
}
return 0;
}
static __rte_always_inline uint8_t
flow_modify_info_mask_8(uint32_t length, uint32_t off)
{
return (0xffu >> (8 - length)) << off;
}
static __rte_always_inline uint16_t
flow_modify_info_mask_16(uint32_t length, uint32_t off)
{
return rte_cpu_to_be_16((0xffffu >> (16 - length)) << off);
}
static __rte_always_inline uint32_t
flow_modify_info_mask_32(uint32_t length, uint32_t off)
{
return rte_cpu_to_be_32((0xffffffffu >> (32 - length)) << off);
}
static __rte_always_inline uint32_t
flow_modify_info_mask_32_masked(uint32_t length, uint32_t off, uint32_t post_mask)
{
uint32_t mask = (0xffffffffu >> (32 - length)) << off;
return rte_cpu_to_be_32(mask & post_mask);
}
void
mlx5_flow_field_id_to_modify_info
(const struct rte_flow_action_modify_data *data,
struct field_modify_info *info, uint32_t *mask,
uint32_t width, struct rte_eth_dev *dev,
const struct rte_flow_attr *attr, struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
uint32_t idx = 0;
uint32_t off_be = 0;
uint32_t length = 0;
switch ((int)data->field) {
case RTE_FLOW_FIELD_START:
/* not supported yet */
MLX5_ASSERT(false);
break;
case RTE_FLOW_FIELD_MAC_DST:
MLX5_ASSERT(data->offset + width <= 48);
off_be = 48 - (data->offset + width);
if (off_be < 16) {
info[idx] = (struct field_modify_info){2, 4,
MLX5_MODI_OUT_DMAC_15_0};
length = off_be + width <= 16 ? width : 16 - off_be;
if (mask)
mask[1] = flow_modify_info_mask_16(length,
off_be);
else
info[idx].offset = off_be;
width -= length;
if (!width)
break;
off_be = 0;
idx++;
} else {
off_be -= 16;
}
info[idx] = (struct field_modify_info){4, 0,
MLX5_MODI_OUT_DMAC_47_16};
if (mask)
mask[0] = flow_modify_info_mask_32(width, off_be);
else
info[idx].offset = off_be;
break;
case RTE_FLOW_FIELD_MAC_SRC:
MLX5_ASSERT(data->offset + width <= 48);
off_be = 48 - (data->offset + width);
if (off_be < 16) {
info[idx] = (struct field_modify_info){2, 4,
MLX5_MODI_OUT_SMAC_15_0};
length = off_be + width <= 16 ? width : 16 - off_be;
if (mask)
mask[1] = flow_modify_info_mask_16(length,
off_be);
else
info[idx].offset = off_be;
width -= length;
if (!width)
break;
off_be = 0;
idx++;
} else {
off_be -= 16;
}
info[idx] = (struct field_modify_info){4, 0,
MLX5_MODI_OUT_SMAC_47_16};
if (mask)
mask[0] = flow_modify_info_mask_32(width, off_be);
else
info[idx].offset = off_be;
break;
case RTE_FLOW_FIELD_VLAN_TYPE:
/* not supported yet */
break;
case RTE_FLOW_FIELD_VLAN_ID:
MLX5_ASSERT(data->offset + width <= 12);
off_be = 12 - (data->offset + width);
info[idx] = (struct field_modify_info){2, 0,
MLX5_MODI_OUT_FIRST_VID};
if (mask)
mask[idx] = flow_modify_info_mask_16(width, off_be);
else
info[idx].offset = off_be;
break;
case RTE_FLOW_FIELD_MAC_TYPE:
MLX5_ASSERT(data->offset + width <= 16);
off_be = 16 - (data->offset + width);
info[idx] = (struct field_modify_info){2, 0,
MLX5_MODI_OUT_ETHERTYPE};
if (mask)
mask[idx] = flow_modify_info_mask_16(width, off_be);
else
info[idx].offset = off_be;
break;
case RTE_FLOW_FIELD_IPV4_DSCP:
MLX5_ASSERT(data->offset + width <= 6);
off_be = 6 - (data->offset + width);
info[idx] = (struct field_modify_info){1, 0,
MLX5_MODI_OUT_IP_DSCP};
if (mask)
mask[idx] = flow_modify_info_mask_8(width, off_be);
else
info[idx].offset = off_be;
break;
case RTE_FLOW_FIELD_IPV4_TTL:
MLX5_ASSERT(data->offset + width <= 8);
off_be = 8 - (data->offset + width);
info[idx] = (struct field_modify_info){1, 0,
MLX5_MODI_OUT_IPV4_TTL};
if (mask)
mask[idx] = flow_modify_info_mask_8(width, off_be);
else
info[idx].offset = off_be;
break;
case RTE_FLOW_FIELD_IPV4_SRC:
MLX5_ASSERT(data->offset + width <= 32);
off_be = 32 - (data->offset + width);
info[idx] = (struct field_modify_info){4, 0,
MLX5_MODI_OUT_SIPV4};
if (mask)
mask[idx] = flow_modify_info_mask_32(width, off_be);
else
info[idx].offset = off_be;
break;
case RTE_FLOW_FIELD_IPV4_DST:
MLX5_ASSERT(data->offset + width <= 32);
off_be = 32 - (data->offset + width);
info[idx] = (struct field_modify_info){4, 0,
MLX5_MODI_OUT_DIPV4};
if (mask)
mask[idx] = flow_modify_info_mask_32(width, off_be);
else
info[idx].offset = off_be;
break;
case RTE_FLOW_FIELD_IPV6_DSCP:
MLX5_ASSERT(data->offset + width <= 6);
off_be = 6 - (data->offset + width);
info[idx] = (struct field_modify_info){1, 0,
MLX5_MODI_OUT_IP_DSCP};
if (mask)
mask[idx] = flow_modify_info_mask_8(width, off_be);
else
info[idx].offset = off_be;
break;
case RTE_FLOW_FIELD_IPV6_HOPLIMIT:
MLX5_ASSERT(data->offset + width <= 8);
off_be = 8 - (data->offset + width);
info[idx] = (struct field_modify_info){1, 0,
MLX5_MODI_OUT_IPV6_HOPLIMIT};
if (mask)
mask[idx] = flow_modify_info_mask_8(width, off_be);
else
info[idx].offset = off_be;
break;
case RTE_FLOW_FIELD_IPV6_SRC: {
/*
* Fields corresponding to IPv6 source address bytes
* arranged according to network byte ordering.
*/
struct field_modify_info fields[] = {
{ 4, 0, MLX5_MODI_OUT_SIPV6_127_96 },
{ 4, 4, MLX5_MODI_OUT_SIPV6_95_64 },
{ 4, 8, MLX5_MODI_OUT_SIPV6_63_32 },
{ 4, 12, MLX5_MODI_OUT_SIPV6_31_0 },
};
/* First mask to be modified is the mask of 4th address byte. */
uint32_t midx = 3;
MLX5_ASSERT(data->offset + width <= 128);
off_be = 128 - (data->offset + width);
while (width > 0 && midx > 0) {
if (off_be < 32) {
info[idx] = fields[midx];
length = off_be + width <= 32 ?
width : 32 - off_be;
if (mask)
mask[midx] = flow_modify_info_mask_32
(length, off_be);
else
info[idx].offset = off_be;
width -= length;
off_be = 0;
idx++;
} else {
off_be -= 32;
}
midx--;
}
if (!width)
break;
info[idx] = fields[midx];
if (mask)
mask[midx] = flow_modify_info_mask_32(width, off_be);
else
info[idx].offset = off_be;
break;
}
case RTE_FLOW_FIELD_IPV6_DST: {
/*
* Fields corresponding to IPv6 destination address bytes
* arranged according to network byte ordering.
*/
struct field_modify_info fields[] = {
{ 4, 0, MLX5_MODI_OUT_DIPV6_127_96 },
{ 4, 4, MLX5_MODI_OUT_DIPV6_95_64 },
{ 4, 8, MLX5_MODI_OUT_DIPV6_63_32 },
{ 4, 12, MLX5_MODI_OUT_DIPV6_31_0 },
};
/* First mask to be modified is the mask of 4th address byte. */
uint32_t midx = 3;
MLX5_ASSERT(data->offset + width <= 128);
off_be = 128 - (data->offset + width);
while (width > 0 && midx > 0) {
if (off_be < 32) {
info[idx] = fields[midx];
length = off_be + width <= 32 ?
width : 32 - off_be;
if (mask)
mask[midx] = flow_modify_info_mask_32
(length, off_be);
else
info[idx].offset = off_be;
width -= length;
off_be = 0;
idx++;
} else {
off_be -= 32;
}
midx--;
}
if (!width)
break;
info[idx] = fields[midx];
if (mask)
mask[midx] = flow_modify_info_mask_32(width, off_be);
else
info[idx].offset = off_be;
break;
}
case RTE_FLOW_FIELD_TCP_PORT_SRC:
MLX5_ASSERT(data->offset + width <= 16);
off_be = 16 - (data->offset + width);
info[idx] = (struct field_modify_info){2, 0,
MLX5_MODI_OUT_TCP_SPORT};
if (mask)
mask[idx] = flow_modify_info_mask_16(width, off_be);
else
info[idx].offset = off_be;
break;
case RTE_FLOW_FIELD_TCP_PORT_DST:
MLX5_ASSERT(data->offset + width <= 16);
off_be = 16 - (data->offset + width);
info[idx] = (struct field_modify_info){2, 0,
MLX5_MODI_OUT_TCP_DPORT};
if (mask)
mask[idx] = flow_modify_info_mask_16(width, off_be);
else
info[idx].offset = off_be;
break;
case RTE_FLOW_FIELD_TCP_SEQ_NUM:
MLX5_ASSERT(data->offset + width <= 32);
off_be = 32 - (data->offset + width);
info[idx] = (struct field_modify_info){4, 0,
MLX5_MODI_OUT_TCP_SEQ_NUM};
if (mask)
mask[idx] = flow_modify_info_mask_32(width, off_be);
else
info[idx].offset = off_be;
break;
case RTE_FLOW_FIELD_TCP_ACK_NUM:
MLX5_ASSERT(data->offset + width <= 32);
off_be = 32 - (data->offset + width);
info[idx] = (struct field_modify_info){4, 0,
MLX5_MODI_OUT_TCP_ACK_NUM};
if (mask)
mask[idx] = flow_modify_info_mask_32(width, off_be);
else
info[idx].offset = off_be;
break;
case RTE_FLOW_FIELD_TCP_FLAGS:
MLX5_ASSERT(data->offset + width <= 9);
off_be = 9 - (data->offset + width);
info[idx] = (struct field_modify_info){2, 0,
MLX5_MODI_OUT_TCP_FLAGS};
if (mask)
mask[idx] = flow_modify_info_mask_16(width, off_be);
else
info[idx].offset = off_be;
break;
case RTE_FLOW_FIELD_UDP_PORT_SRC:
MLX5_ASSERT(data->offset + width <= 16);
off_be = 16 - (data->offset + width);
info[idx] = (struct field_modify_info){2, 0,
MLX5_MODI_OUT_UDP_SPORT};
if (mask)
mask[idx] = flow_modify_info_mask_16(width, off_be);
else
info[idx].offset = off_be;
break;
case RTE_FLOW_FIELD_UDP_PORT_DST:
MLX5_ASSERT(data->offset + width <= 16);
off_be = 16 - (data->offset + width);
info[idx] = (struct field_modify_info){2, 0,
MLX5_MODI_OUT_UDP_DPORT};
if (mask)
mask[idx] = flow_modify_info_mask_16(width, off_be);
else
info[idx].offset = off_be;
break;
case RTE_FLOW_FIELD_VXLAN_VNI:
MLX5_ASSERT(data->offset + width <= 24);
/* VNI is on bits 31-8 of TUNNEL_HDR_DW_1. */
off_be = 24 - (data->offset + width) + 8;
info[idx] = (struct field_modify_info){4, 0,
MLX5_MODI_TUNNEL_HDR_DW_1};
if (mask)
mask[idx] = flow_modify_info_mask_32(width, off_be);
else
info[idx].offset = off_be;
break;
case RTE_FLOW_FIELD_GENEVE_VNI:
/* not supported yet*/
break;
case RTE_FLOW_FIELD_GTP_TEID:
MLX5_ASSERT(data->offset + width <= 32);
off_be = 32 - (data->offset + width);
info[idx] = (struct field_modify_info){4, 0,
MLX5_MODI_GTP_TEID};
if (mask)
mask[idx] = flow_modify_info_mask_32(width, off_be);
else
info[idx].offset = off_be;
break;
case RTE_FLOW_FIELD_TAG:
{
MLX5_ASSERT(data->offset + width <= 32);
int reg;
if (priv->sh->config.dv_flow_en == 2)
reg = flow_hw_get_reg_id(RTE_FLOW_ITEM_TYPE_TAG,
data->level);
else
reg = mlx5_flow_get_reg_id(dev, MLX5_APP_TAG,
data->level, error);
if (reg < 0)
return;
MLX5_ASSERT(reg != REG_NON);
MLX5_ASSERT((unsigned int)reg < RTE_DIM(reg_to_field));
info[idx] = (struct field_modify_info){4, 0,
reg_to_field[reg]};
if (mask)
mask[idx] = flow_modify_info_mask_32
(width, data->offset);
else
info[idx].offset = data->offset;
}
break;
case RTE_FLOW_FIELD_MARK:
{
uint32_t mark_mask = priv->sh->dv_mark_mask;
uint32_t mark_count = __builtin_popcount(mark_mask);
RTE_SET_USED(mark_count);
MLX5_ASSERT(data->offset + width <= mark_count);
int reg = mlx5_flow_get_reg_id(dev, MLX5_FLOW_MARK,
0, error);
if (reg < 0)
return;
MLX5_ASSERT(reg != REG_NON);
MLX5_ASSERT((unsigned int)reg < RTE_DIM(reg_to_field));
info[idx] = (struct field_modify_info){4, 0,
reg_to_field[reg]};
if (mask)
mask[idx] = flow_modify_info_mask_32_masked
(width, data->offset, mark_mask);
else
info[idx].offset = data->offset;
}
break;
case RTE_FLOW_FIELD_META:
{
uint32_t meta_mask = priv->sh->dv_meta_mask;
uint32_t meta_count = __builtin_popcount(meta_mask);
RTE_SET_USED(meta_count);
MLX5_ASSERT(data->offset + width <= meta_count);
int reg = flow_dv_get_metadata_reg(dev, attr, error);
if (reg < 0)
return;
MLX5_ASSERT(reg != REG_NON);
MLX5_ASSERT((unsigned int)reg < RTE_DIM(reg_to_field));
info[idx] = (struct field_modify_info){4, 0,
reg_to_field[reg]};
if (mask)
mask[idx] = flow_modify_info_mask_32_masked
(width, data->offset, meta_mask);
else
info[idx].offset = data->offset;
}
break;
case RTE_FLOW_FIELD_IPV4_ECN:
case RTE_FLOW_FIELD_IPV6_ECN:
MLX5_ASSERT(data->offset + width <= 2);
off_be = 2 - (data->offset + width);
info[idx] = (struct field_modify_info){1, 0,
MLX5_MODI_OUT_IP_ECN};
if (mask)
mask[idx] = flow_modify_info_mask_8(width, off_be);
else
info[idx].offset = off_be;
break;
case RTE_FLOW_FIELD_GTP_PSC_QFI:
MLX5_ASSERT(data->offset + width <= 8);
off_be = data->offset + 8;
info[idx] = (struct field_modify_info){4, 0,
MLX5_MODI_GTPU_FIRST_EXT_DW_0};
if (mask)
mask[idx] = flow_modify_info_mask_32(width, off_be);
else
info[idx].offset = off_be;
break;
case MLX5_RTE_FLOW_FIELD_META_REG:
{
uint32_t meta_mask = priv->sh->dv_meta_mask;
uint32_t meta_count = __builtin_popcount(meta_mask);
uint32_t reg = data->level;
RTE_SET_USED(meta_count);
MLX5_ASSERT(data->offset + width <= meta_count);
MLX5_ASSERT(reg != REG_NON);
MLX5_ASSERT(reg < RTE_DIM(reg_to_field));
info[idx] = (struct field_modify_info){4, 0, reg_to_field[reg]};
if (mask)
mask[idx] = flow_modify_info_mask_32_masked
(width, data->offset, meta_mask);
else
info[idx].offset = data->offset;
}
break;
case RTE_FLOW_FIELD_METER_COLOR:
{
const uint32_t color_mask =
(UINT32_C(1) << MLX5_MTR_COLOR_BITS) - 1;
int reg;
if (priv->sh->config.dv_flow_en == 2)
reg = flow_hw_get_reg_id
(RTE_FLOW_ITEM_TYPE_METER_COLOR, 0);
else
reg = mlx5_flow_get_reg_id(dev, MLX5_MTR_COLOR,
0, error);
if (reg < 0)
return;
MLX5_ASSERT(reg != REG_NON);
MLX5_ASSERT((unsigned int)reg < RTE_DIM(reg_to_field));
info[idx] = (struct field_modify_info){4, 0,
reg_to_field[reg]};
if (mask)
mask[idx] = flow_modify_info_mask_32_masked
(width, data->offset, color_mask);
else
info[idx].offset = data->offset;
}
break;
case RTE_FLOW_FIELD_POINTER:
case RTE_FLOW_FIELD_VALUE:
default:
MLX5_ASSERT(false);
break;
}
}
/**
* Convert modify_field action to DV specification.
*
* @param[in] dev
* Pointer to the rte_eth_dev structure.
* @param[in,out] resource
* Pointer to the modify-header resource.
* @param[in] action
* Pointer to action specification.
* @param[in] attr
* Attributes of flow that includes this item.
* @param[out] error
* Pointer to the error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_convert_action_modify_field
(struct rte_eth_dev *dev,
struct mlx5_flow_dv_modify_hdr_resource *resource,
const struct rte_flow_action *action,
const struct rte_flow_attr *attr,
struct rte_flow_error *error)
{
const struct rte_flow_action_modify_field *conf =
(const struct rte_flow_action_modify_field *)(action->conf);
struct rte_flow_item item = {
.spec = NULL,
.mask = NULL
};
struct field_modify_info field[MLX5_ACT_MAX_MOD_FIELDS] = {
{0, 0, 0} };
struct field_modify_info dcopy[MLX5_ACT_MAX_MOD_FIELDS] = {
{0, 0, 0} };
uint32_t mask[MLX5_ACT_MAX_MOD_FIELDS] = {0, 0, 0, 0, 0};
uint32_t type, meta = 0;
if (conf->src.field == RTE_FLOW_FIELD_POINTER ||
conf->src.field == RTE_FLOW_FIELD_VALUE) {
type = conf->operation == RTE_FLOW_MODIFY_SET ?
MLX5_MODIFICATION_TYPE_SET : MLX5_MODIFICATION_TYPE_ADD;
/** For SET fill the destination field (field) first. */
mlx5_flow_field_id_to_modify_info(&conf->dst, field, mask,
conf->width, dev,
attr, error);
item.spec = conf->src.field == RTE_FLOW_FIELD_POINTER ?
(void *)(uintptr_t)conf->src.pvalue :
(void *)(uintptr_t)&conf->src.value;
if (conf->dst.field == RTE_FLOW_FIELD_META ||
conf->dst.field == RTE_FLOW_FIELD_TAG ||
conf->dst.field == RTE_FLOW_FIELD_METER_COLOR) {
meta = *(const unaligned_uint32_t *)item.spec;
meta = rte_cpu_to_be_32(meta);
item.spec = &meta;
}
} else {
type = MLX5_MODIFICATION_TYPE_COPY;
/** For COPY fill the destination field (dcopy) without mask. */
mlx5_flow_field_id_to_modify_info(&conf->dst, dcopy, NULL,
conf->width, dev,
attr, error);
/** Then construct the source field (field) with mask. */
mlx5_flow_field_id_to_modify_info(&conf->src, field, mask,
conf->width, dev,
attr, error);
}
item.mask = &mask;
return flow_dv_convert_modify_action(&item,
field, dcopy, resource, type, error);
}
/**
* Validate MARK item.
*
* @param[in] dev
* Pointer to the rte_eth_dev structure.
* @param[in] item
* Item specification.
* @param[in] attr
* Attributes of flow that includes this item.
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_item_mark(struct rte_eth_dev *dev,
const struct rte_flow_item *item,
const struct rte_flow_attr *attr __rte_unused,
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_sh_config *config = &priv->sh->config;
const struct rte_flow_item_mark *spec = item->spec;
const struct rte_flow_item_mark *mask = item->mask;
const struct rte_flow_item_mark nic_mask = {
.id = priv->sh->dv_mark_mask,
};
int ret;
if (config->dv_xmeta_en == MLX5_XMETA_MODE_LEGACY)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM, item,
"extended metadata feature"
" isn't enabled");
if (!mlx5_flow_ext_mreg_supported(dev))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM, item,
"extended metadata register"
" isn't supported");
if (!nic_mask.id)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM, item,
"extended metadata register"
" isn't available");
ret = mlx5_flow_get_reg_id(dev, MLX5_FLOW_MARK, 0, error);
if (ret < 0)
return ret;
if (!spec)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
item->spec,
"data cannot be empty");
if (spec->id >= (MLX5_FLOW_MARK_MAX & nic_mask.id))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION_CONF,
&spec->id,
"mark id exceeds the limit");
if (!mask)
mask = &nic_mask;
if (!mask->id)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM_SPEC, NULL,
"mask cannot be zero");
ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
(const uint8_t *)&nic_mask,
sizeof(struct rte_flow_item_mark),
MLX5_ITEM_RANGE_NOT_ACCEPTED, error);
if (ret < 0)
return ret;
return 0;
}
/**
* Validate META item.
*
* @param[in] dev
* Pointer to the rte_eth_dev structure.
* @param[in] item
* Item specification.
* @param[in] attr
* Attributes of flow that includes this item.
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_item_meta(struct rte_eth_dev *dev __rte_unused,
const struct rte_flow_item *item,
const struct rte_flow_attr *attr,
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_sh_config *config = &priv->sh->config;
const struct rte_flow_item_meta *spec = item->spec;
const struct rte_flow_item_meta *mask = item->mask;
struct rte_flow_item_meta nic_mask = {
.data = UINT32_MAX
};
int reg;
int ret;
if (!spec)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
item->spec,
"data cannot be empty");
if (config->dv_xmeta_en != MLX5_XMETA_MODE_LEGACY) {
if (!mlx5_flow_ext_mreg_supported(dev))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM, item,
"extended metadata register"
" isn't supported");
reg = flow_dv_get_metadata_reg(dev, attr, error);
if (reg < 0)
return reg;
if (reg == REG_NON)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM, item,
"unavailable extended metadata register");
if (reg == REG_B)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM, item,
"match on reg_b "
"isn't supported");
if (reg != REG_A)
nic_mask.data = priv->sh->dv_meta_mask;
} else {
if (attr->transfer)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM, item,
"extended metadata feature "
"should be enabled when "
"meta item is requested "
"with e-switch mode ");
if (attr->ingress)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM, item,
"match on metadata for ingress "
"is not supported in legacy "
"metadata mode");
}
if (!mask)
mask = &rte_flow_item_meta_mask;
if (!mask->data)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM_SPEC, NULL,
"mask cannot be zero");
ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
(const uint8_t *)&nic_mask,
sizeof(struct rte_flow_item_meta),
MLX5_ITEM_RANGE_NOT_ACCEPTED, error);
return ret;
}
/**
* Validate TAG item.
*
* @param[in] dev
* Pointer to the rte_eth_dev structure.
* @param[in] item
* Item specification.
* @param[in] attr
* Attributes of flow that includes this item.
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_item_tag(struct rte_eth_dev *dev,
const struct rte_flow_item *item,
const struct rte_flow_attr *attr __rte_unused,
struct rte_flow_error *error)
{
const struct rte_flow_item_tag *spec = item->spec;
const struct rte_flow_item_tag *mask = item->mask;
const struct rte_flow_item_tag nic_mask = {
.data = RTE_BE32(UINT32_MAX),
.index = 0xff,
};
int ret;
if (!mlx5_flow_ext_mreg_supported(dev))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM, item,
"extensive metadata register"
" isn't supported");
if (!spec)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
item->spec,
"data cannot be empty");
if (!mask)
mask = &rte_flow_item_tag_mask;
if (!mask->data)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM_SPEC, NULL,
"mask cannot be zero");
ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
(const uint8_t *)&nic_mask,
sizeof(struct rte_flow_item_tag),
MLX5_ITEM_RANGE_NOT_ACCEPTED, error);
if (ret < 0)
return ret;
if (mask->index != 0xff)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM_SPEC, NULL,
"partial mask for tag index"
" is not supported");
ret = mlx5_flow_get_reg_id(dev, MLX5_APP_TAG, spec->index, error);
if (ret < 0)
return ret;
MLX5_ASSERT(ret != REG_NON);
return 0;
}
/**
* Validate vport item.
*
* @param[in] dev
* Pointer to the rte_eth_dev structure.
* @param[in] item
* Item specification.
* @param[in] attr
* Attributes of flow that includes this item.
* @param[in] item_flags
* Bit-fields that holds the items detected until now.
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_item_port_id(struct rte_eth_dev *dev,
const struct rte_flow_item *item,
const struct rte_flow_attr *attr,
uint64_t item_flags,
struct rte_flow_error *error)
{
const struct rte_flow_item_port_id *spec = item->spec;
const struct rte_flow_item_port_id *mask = item->mask;
const struct rte_flow_item_port_id switch_mask = {
.id = 0xffffffff,
};
struct mlx5_priv *esw_priv;
struct mlx5_priv *dev_priv;
int ret;
if (!attr->transfer)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM,
NULL,
"match on port id is valid only"
" when transfer flag is enabled");
if (item_flags & MLX5_FLOW_ITEM_PORT_ID)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM, item,
"multiple source ports are not"
" supported");
if (!mask)
mask = &switch_mask;
if (mask->id != 0xffffffff)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM_MASK,
mask,
"no support for partial mask on"
" \"id\" field");
ret = mlx5_flow_item_acceptable
(item, (const uint8_t *)mask,
(const uint8_t *)&rte_flow_item_port_id_mask,
sizeof(struct rte_flow_item_port_id),
MLX5_ITEM_RANGE_NOT_ACCEPTED, error);
if (ret)
return ret;
if (!spec)
return 0;
if (spec->id == MLX5_PORT_ESW_MGR)
return 0;
esw_priv = mlx5_port_to_eswitch_info(spec->id, false);
if (!esw_priv)
return rte_flow_error_set(error, rte_errno,
RTE_FLOW_ERROR_TYPE_ITEM_SPEC, spec,
"failed to obtain E-Switch info for"
" port");
dev_priv = mlx5_dev_to_eswitch_info(dev);
if (!dev_priv)
return rte_flow_error_set(error, rte_errno,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"failed to obtain E-Switch info");
if (esw_priv->domain_id != dev_priv->domain_id)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM_SPEC, spec,
"cannot match on a port from a"
" different E-Switch");
return 0;
}
/**
* Validate represented port item.
*
* @param[in] dev
* Pointer to the rte_eth_dev structure.
* @param[in] item
* Item specification.
* @param[in] attr
* Attributes of flow that includes this item.
* @param[in] item_flags
* Bit-fields that holds the items detected until now.
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_item_represented_port(struct rte_eth_dev *dev,
const struct rte_flow_item *item,
const struct rte_flow_attr *attr,
uint64_t item_flags,
struct rte_flow_error *error)
{
const struct rte_flow_item_ethdev *spec = item->spec;
const struct rte_flow_item_ethdev *mask = item->mask;
const struct rte_flow_item_ethdev switch_mask = {
.port_id = UINT16_MAX,
};
struct mlx5_priv *esw_priv;
struct mlx5_priv *dev_priv;
int ret;
if (!attr->transfer)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM, NULL,
"match on port id is valid only when transfer flag is enabled");
if (item_flags & MLX5_FLOW_ITEM_REPRESENTED_PORT)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM, item,
"multiple source ports are not supported");
if (!mask)
mask = &switch_mask;
if (mask->port_id != UINT16_MAX)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
"no support for partial mask on \"id\" field");
ret = mlx5_flow_item_acceptable
(item, (const uint8_t *)mask,
(const uint8_t *)&rte_flow_item_ethdev_mask,
sizeof(struct rte_flow_item_ethdev),
MLX5_ITEM_RANGE_NOT_ACCEPTED, error);
if (ret)
return ret;
if (!spec || spec->port_id == UINT16_MAX)
return 0;
esw_priv = mlx5_port_to_eswitch_info(spec->port_id, false);
if (!esw_priv)
return rte_flow_error_set(error, rte_errno,
RTE_FLOW_ERROR_TYPE_ITEM_SPEC, spec,
"failed to obtain E-Switch info for port");
dev_priv = mlx5_dev_to_eswitch_info(dev);
if (!dev_priv)
return rte_flow_error_set(error, rte_errno,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"failed to obtain E-Switch info");
if (esw_priv->domain_id != dev_priv->domain_id)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM_SPEC, spec,
"cannot match on a port from a different E-Switch");
return 0;
}
/**
* Validate VLAN item.
*
* @param[in] item
* Item specification.
* @param[in] item_flags
* Bit-fields that holds the items detected until now.
* @param[in] dev
* Ethernet device flow is being created on.
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_item_vlan(const struct rte_flow_item *item,
uint64_t item_flags,
struct rte_eth_dev *dev,
struct rte_flow_error *error)
{
const struct rte_flow_item_vlan *mask = item->mask;
const struct rte_flow_item_vlan nic_mask = {
.tci = RTE_BE16(UINT16_MAX),
.inner_type = RTE_BE16(UINT16_MAX),
.has_more_vlan = 1,
};
const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
int ret;
const uint64_t l34m = tunnel ? (MLX5_FLOW_LAYER_INNER_L3 |
MLX5_FLOW_LAYER_INNER_L4) :
(MLX5_FLOW_LAYER_OUTER_L3 |
MLX5_FLOW_LAYER_OUTER_L4);
const uint64_t vlanm = tunnel ? MLX5_FLOW_LAYER_INNER_VLAN :
MLX5_FLOW_LAYER_OUTER_VLAN;
if (item_flags & vlanm)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM, item,
"multiple VLAN layers not supported");
else if ((item_flags & l34m) != 0)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM, item,
"VLAN cannot follow L3/L4 layer");
if (!mask)
mask = &rte_flow_item_vlan_mask;
ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
(const uint8_t *)&nic_mask,
sizeof(struct rte_flow_item_vlan),
MLX5_ITEM_RANGE_NOT_ACCEPTED, error);
if (ret)
return ret;
if (!tunnel && mask->tci != RTE_BE16(0x0fff)) {
struct mlx5_priv *priv = dev->data->dev_private;
if (priv->vmwa_context) {
/*
* Non-NULL context means we have a virtual machine
* and SR-IOV enabled, we have to create VLAN interface
* to make hypervisor to setup E-Switch vport
* context correctly. We avoid creating the multiple
* VLAN interfaces, so we cannot support VLAN tag mask.
*/
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM,
item,
"VLAN tag mask is not"
" supported in virtual"
" environment");
}
}
return 0;
}
/*
* GTP flags are contained in 1 byte of the format:
* -------------------------------------------
* | bit | 0 - 2 | 3 | 4 | 5 | 6 | 7 |
* |-----------------------------------------|
* | value | Version | PT | Res | E | S | PN |
* -------------------------------------------
*
* Matching is supported only for GTP flags E, S, PN.
*/
#define MLX5_GTP_FLAGS_MASK 0x07
/**
* Validate GTP item.
*
* @param[in] dev
* Pointer to the rte_eth_dev structure.
* @param[in] item
* Item specification.
* @param[in] item_flags
* Bit-fields that holds the items detected until now.
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_item_gtp(struct rte_eth_dev *dev,
const struct rte_flow_item *item,
uint64_t item_flags,
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
const struct rte_flow_item_gtp *spec = item->spec;
const struct rte_flow_item_gtp *mask = item->mask;
const struct rte_flow_item_gtp nic_mask = {
.v_pt_rsv_flags = MLX5_GTP_FLAGS_MASK,
.msg_type = 0xff,
.teid = RTE_BE32(0xffffffff),
};
if (!priv->sh->cdev->config.hca_attr.tunnel_stateless_gtp)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM, item,
"GTP support is not enabled");
if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM, item,
"multiple tunnel layers not"
" supported");
if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L4_UDP))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM, item,
"no outer UDP layer found");
if (!mask)
mask = &rte_flow_item_gtp_mask;
if (spec && spec->v_pt_rsv_flags & ~MLX5_GTP_FLAGS_MASK)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM, item,
"Match is supported for GTP"
" flags only");
return mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
(const uint8_t *)&nic_mask,
sizeof(struct rte_flow_item_gtp),
MLX5_ITEM_RANGE_NOT_ACCEPTED, error);
}
/**
* Validate GTP PSC item.
*
* @param[in] item
* Item specification.
* @param[in] last_item
* Previous validated item in the pattern items.
* @param[in] gtp_item
* Previous GTP item specification.
* @param root
* Whether action is on root table.
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_item_gtp_psc(const struct rte_flow_item *item,
uint64_t last_item,
const struct rte_flow_item *gtp_item,
bool root,
struct rte_flow_error *error)
{
const struct rte_flow_item_gtp *gtp_spec;
const struct rte_flow_item_gtp *gtp_mask;
const struct rte_flow_item_gtp_psc *mask;
const struct rte_flow_item_gtp_psc nic_mask = {
.hdr.type = 0xF,
.hdr.qfi = 0x3F,
};
if (!gtp_item || !(last_item & MLX5_FLOW_LAYER_GTP))
return rte_flow_error_set
(error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ITEM, item,
"GTP PSC item must be preceded with GTP item");
gtp_spec = gtp_item->spec;
gtp_mask = gtp_item->mask ? gtp_item->mask : &rte_flow_item_gtp_mask;
/* GTP spec and E flag is requested to match zero. */
if (gtp_spec &&
(gtp_mask->v_pt_rsv_flags &
~gtp_spec->v_pt_rsv_flags & MLX5_GTP_EXT_HEADER_FLAG))
return rte_flow_error_set
(error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ITEM, item,
"GTP E flag must be 1 to match GTP PSC");
/* Check the flow is not created in group zero. */
if (root)
return rte_flow_error_set
(error, ENOTSUP, RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"GTP PSC is not supported for group 0");
/* GTP spec is here and E flag is requested to match zero. */
if (!item->spec)
return 0;
mask = item->mask ? item->mask : &rte_flow_item_gtp_psc_mask;
return mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
(const uint8_t *)&nic_mask,
sizeof(struct rte_flow_item_gtp_psc),
MLX5_ITEM_RANGE_NOT_ACCEPTED, error);
}
/**
* Validate IPV4 item.
* Use existing validation function mlx5_flow_validate_item_ipv4(), and
* add specific validation of fragment_offset field,
*
* @param[in] item
* Item specification.
* @param[in] item_flags
* Bit-fields that holds the items detected until now.
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_item_ipv4(struct rte_eth_dev *dev,
const struct rte_flow_item *item,
uint64_t item_flags, uint64_t last_item,
uint16_t ether_type, struct rte_flow_error *error)
{
int ret;
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_hca_attr *attr = &priv->sh->cdev->config.hca_attr;
const struct rte_flow_item_ipv4 *spec = item->spec;
const struct rte_flow_item_ipv4 *last = item->last;
const struct rte_flow_item_ipv4 *mask = item->mask;
rte_be16_t fragment_offset_spec = 0;
rte_be16_t fragment_offset_last = 0;
struct rte_flow_item_ipv4 nic_ipv4_mask = {
.hdr = {
.src_addr = RTE_BE32(0xffffffff),
.dst_addr = RTE_BE32(0xffffffff),
.type_of_service = 0xff,
.fragment_offset = RTE_BE16(0xffff),
.next_proto_id = 0xff,
.time_to_live = 0xff,
},
};
if (mask && (mask->hdr.version_ihl & RTE_IPV4_HDR_IHL_MASK)) {
int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
bool ihl_cap = !tunnel ?
attr->outer_ipv4_ihl : attr->inner_ipv4_ihl;
if (!ihl_cap)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM,
item,
"IPV4 ihl offload not supported");
nic_ipv4_mask.hdr.version_ihl = mask->hdr.version_ihl;
}
ret = mlx5_flow_validate_item_ipv4(item, item_flags, last_item,
ether_type, &nic_ipv4_mask,
MLX5_ITEM_RANGE_ACCEPTED, error);
if (ret < 0)
return ret;
if (spec && mask)
fragment_offset_spec = spec->hdr.fragment_offset &
mask->hdr.fragment_offset;
if (!fragment_offset_spec)
return 0;
/*
* spec and mask are valid, enforce using full mask to make sure the
* complete value is used correctly.
*/
if ((mask->hdr.fragment_offset & RTE_BE16(MLX5_IPV4_FRAG_OFFSET_MASK))
!= RTE_BE16(MLX5_IPV4_FRAG_OFFSET_MASK))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM_MASK,
item, "must use full mask for"
" fragment_offset");
/*
* Match on fragment_offset 0x2000 means MF is 1 and frag-offset is 0,
* indicating this is 1st fragment of fragmented packet.
* This is not yet supported in MLX5, return appropriate error message.
*/
if (fragment_offset_spec == RTE_BE16(RTE_IPV4_HDR_MF_FLAG))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM, item,
"match on first fragment not "
"supported");
if (fragment_offset_spec && !last)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM, item,
"specified value not supported");
/* spec and last are valid, validate the specified range. */
fragment_offset_last = last->hdr.fragment_offset &
mask->hdr.fragment_offset;
/*
* Match on fragment_offset spec 0x2001 and last 0x3fff
* means MF is 1 and frag-offset is > 0.
* This packet is fragment 2nd and onward, excluding last.
* This is not yet supported in MLX5, return appropriate
* error message.
*/
if (fragment_offset_spec == RTE_BE16(RTE_IPV4_HDR_MF_FLAG + 1) &&
fragment_offset_last == RTE_BE16(MLX5_IPV4_FRAG_OFFSET_MASK))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM_LAST,
last, "match on following "
"fragments not supported");
/*
* Match on fragment_offset spec 0x0001 and last 0x1fff
* means MF is 0 and frag-offset is > 0.
* This packet is last fragment of fragmented packet.
* This is not yet supported in MLX5, return appropriate
* error message.
*/
if (fragment_offset_spec == RTE_BE16(1) &&
fragment_offset_last == RTE_BE16(RTE_IPV4_HDR_OFFSET_MASK))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM_LAST,
last, "match on last "
"fragment not supported");
/*
* Match on fragment_offset spec 0x0001 and last 0x3fff
* means MF and/or frag-offset is not 0.
* This is a fragmented packet.
* Other range values are invalid and rejected.
*/
if (!(fragment_offset_spec == RTE_BE16(1) &&
fragment_offset_last == RTE_BE16(MLX5_IPV4_FRAG_OFFSET_MASK)))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM_LAST, last,
"specified range not supported");
return 0;
}
/**
* Validate IPV6 fragment extension item.
*
* @param[in] item
* Item specification.
* @param[in] item_flags
* Bit-fields that holds the items detected until now.
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_item_ipv6_frag_ext(const struct rte_flow_item *item,
uint64_t item_flags,
struct rte_flow_error *error)
{
const struct rte_flow_item_ipv6_frag_ext *spec = item->spec;
const struct rte_flow_item_ipv6_frag_ext *last = item->last;
const struct rte_flow_item_ipv6_frag_ext *mask = item->mask;
rte_be16_t frag_data_spec = 0;
rte_be16_t frag_data_last = 0;
const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
const uint64_t l4m = tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
MLX5_FLOW_LAYER_OUTER_L4;
int ret = 0;
struct rte_flow_item_ipv6_frag_ext nic_mask = {
.hdr = {
.next_header = 0xff,
.frag_data = RTE_BE16(0xffff),
},
};
if (item_flags & l4m)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM, item,
"ipv6 fragment extension item cannot "
"follow L4 item.");
if ((tunnel && !(item_flags & MLX5_FLOW_LAYER_INNER_L3_IPV6)) ||
(!tunnel && !(item_flags & MLX5_FLOW_LAYER_OUTER_L3_IPV6)))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM, item,
"ipv6 fragment extension item must "
"follow ipv6 item");
if (spec && mask)
frag_data_spec = spec->hdr.frag_data & mask->hdr.frag_data;
if (!frag_data_spec)
return 0;
/*
* spec and mask are valid, enforce using full mask to make sure the
* complete value is used correctly.
*/
if ((mask->hdr.frag_data & RTE_BE16(RTE_IPV6_FRAG_USED_MASK)) !=
RTE_BE16(RTE_IPV6_FRAG_USED_MASK))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM_MASK,
item, "must use full mask for"
" frag_data");
/*
* Match on frag_data 0x00001 means M is 1 and frag-offset is 0.
* This is 1st fragment of fragmented packet.
*/
if (frag_data_spec == RTE_BE16(RTE_IPV6_EHDR_MF_MASK))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM, item,
"match on first fragment not "
"supported");
if (frag_data_spec && !last)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM, item,
"specified value not supported");
ret = mlx5_flow_item_acceptable
(item, (const uint8_t *)mask,
(const uint8_t *)&nic_mask,
sizeof(struct rte_flow_item_ipv6_frag_ext),
MLX5_ITEM_RANGE_ACCEPTED, error);
if (ret)
return ret;
/* spec and last are valid, validate the specified range. */
frag_data_last = last->hdr.frag_data & mask->hdr.frag_data;
/*
* Match on frag_data spec 0x0009 and last 0xfff9
* means M is 1 and frag-offset is > 0.
* This packet is fragment 2nd and onward, excluding last.
* This is not yet supported in MLX5, return appropriate
* error message.
*/
if (frag_data_spec == RTE_BE16(RTE_IPV6_EHDR_FO_ALIGN |
RTE_IPV6_EHDR_MF_MASK) &&
frag_data_last == RTE_BE16(RTE_IPV6_FRAG_USED_MASK))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM_LAST,
last, "match on following "
"fragments not supported");
/*
* Match on frag_data spec 0x0008 and last 0xfff8
* means M is 0 and frag-offset is > 0.
* This packet is last fragment of fragmented packet.
* This is not yet supported in MLX5, return appropriate
* error message.
*/
if (frag_data_spec == RTE_BE16(RTE_IPV6_EHDR_FO_ALIGN) &&
frag_data_last == RTE_BE16(RTE_IPV6_EHDR_FO_MASK))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM_LAST,
last, "match on last "
"fragment not supported");
/* Other range values are invalid and rejected. */
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM_LAST, last,
"specified range not supported");
}
/*
* Validate ASO CT item.
*
* @param[in] dev
* Pointer to the rte_eth_dev structure.
* @param[in] item
* Item specification.
* @param[in] item_flags
* Pointer to bit-fields that holds the items detected until now.
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_item_aso_ct(struct rte_eth_dev *dev,
const struct rte_flow_item *item,
uint64_t *item_flags,
struct rte_flow_error *error)
{
const struct rte_flow_item_conntrack *spec = item->spec;
const struct rte_flow_item_conntrack *mask = item->mask;
RTE_SET_USED(dev);
uint32_t flags;
if (*item_flags & MLX5_FLOW_LAYER_ASO_CT)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM, NULL,
"Only one CT is supported");
if (!mask)
mask = &rte_flow_item_conntrack_mask;
flags = spec->flags & mask->flags;
if ((flags & RTE_FLOW_CONNTRACK_PKT_STATE_VALID) &&
((flags & RTE_FLOW_CONNTRACK_PKT_STATE_INVALID) ||
(flags & RTE_FLOW_CONNTRACK_PKT_STATE_BAD) ||
(flags & RTE_FLOW_CONNTRACK_PKT_STATE_DISABLED)))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM, NULL,
"Conflict status bits");
/* State change also needs to be considered. */
*item_flags |= MLX5_FLOW_LAYER_ASO_CT;
return 0;
}
/**
* Validate the pop VLAN action.
*
* @param[in] dev
* Pointer to the rte_eth_dev structure.
* @param[in] action_flags
* Holds the actions detected until now.
* @param[in] action
* Pointer to the pop vlan action.
* @param[in] item_flags
* The items found in this flow rule.
* @param[in] attr
* Pointer to flow attributes.
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_action_pop_vlan(struct rte_eth_dev *dev,
uint64_t action_flags,
const struct rte_flow_action *action,
uint64_t item_flags,
const struct rte_flow_attr *attr,
struct rte_flow_error *error)
{
const struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_dev_ctx_shared *sh = priv->sh;
bool direction_error = false;
if (!priv->sh->pop_vlan_action)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"pop vlan action is not supported");
/* Pop VLAN is not supported in egress except for CX6 FDB mode. */
if (attr->transfer) {
bool fdb_tx = priv->representor_id != UINT16_MAX;
bool is_cx5 = sh->steering_format_version ==
MLX5_STEERING_LOGIC_FORMAT_CONNECTX_5;
if (fdb_tx && is_cx5)
direction_error = true;
} else if (attr->egress) {
direction_error = true;
}
if (direction_error)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ATTR_EGRESS,
NULL,
"pop vlan action not supported for egress");
if (action_flags & MLX5_FLOW_VLAN_ACTIONS)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"no support for multiple VLAN "
"actions");
/* Pop VLAN with preceding Decap requires inner header with VLAN. */
if ((action_flags & MLX5_FLOW_ACTION_DECAP) &&
!(item_flags & MLX5_FLOW_LAYER_INNER_VLAN))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"cannot pop vlan after decap without "
"match on inner vlan in the flow");
/* Pop VLAN without preceding Decap requires outer header with VLAN. */
if (!(action_flags & MLX5_FLOW_ACTION_DECAP) &&
!(item_flags & MLX5_FLOW_LAYER_OUTER_VLAN))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"cannot pop vlan without a "
"match on (outer) vlan in the flow");
if (action_flags & MLX5_FLOW_ACTION_PORT_ID)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"wrong action order, port_id should "
"be after pop VLAN action");
if (!attr->transfer && priv->representor)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"pop vlan action for VF representor "
"not supported on NIC table");
return 0;
}
/**
* Get VLAN default info from vlan match info.
*
* @param[in] items
* the list of item specifications.
* @param[out] vlan
* pointer VLAN info to fill to.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static void
flow_dev_get_vlan_info_from_items(const struct rte_flow_item *items,
struct rte_vlan_hdr *vlan)
{
const struct rte_flow_item_vlan nic_mask = {
.tci = RTE_BE16(MLX5DV_FLOW_VLAN_PCP_MASK |
MLX5DV_FLOW_VLAN_VID_MASK),
.inner_type = RTE_BE16(0xffff),
};
if (items == NULL)
return;
for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
int type = items->type;
if (type == RTE_FLOW_ITEM_TYPE_VLAN ||
type == MLX5_RTE_FLOW_ITEM_TYPE_VLAN)
break;
}
if (items->type != RTE_FLOW_ITEM_TYPE_END) {
const struct rte_flow_item_vlan *vlan_m = items->mask;
const struct rte_flow_item_vlan *vlan_v = items->spec;
/* If VLAN item in pattern doesn't contain data, return here. */
if (!vlan_v)
return;
if (!vlan_m)
vlan_m = &nic_mask;
/* Only full match values are accepted */
if ((vlan_m->tci & MLX5DV_FLOW_VLAN_PCP_MASK_BE) ==
MLX5DV_FLOW_VLAN_PCP_MASK_BE) {
vlan->vlan_tci &= ~MLX5DV_FLOW_VLAN_PCP_MASK;
vlan->vlan_tci |=
rte_be_to_cpu_16(vlan_v->tci &
MLX5DV_FLOW_VLAN_PCP_MASK_BE);
}
if ((vlan_m->tci & MLX5DV_FLOW_VLAN_VID_MASK_BE) ==
MLX5DV_FLOW_VLAN_VID_MASK_BE) {
vlan->vlan_tci &= ~MLX5DV_FLOW_VLAN_VID_MASK;
vlan->vlan_tci |=
rte_be_to_cpu_16(vlan_v->tci &
MLX5DV_FLOW_VLAN_VID_MASK_BE);
}
if (vlan_m->inner_type == nic_mask.inner_type)
vlan->eth_proto = rte_be_to_cpu_16(vlan_v->inner_type &
vlan_m->inner_type);
}
}
/**
* Validate the push VLAN action.
*
* @param[in] dev
* Pointer to the rte_eth_dev structure.
* @param[in] action_flags
* Holds the actions detected until now.
* @param[in] item_flags
* The items found in this flow rule.
* @param[in] action
* Pointer to the action structure.
* @param[in] attr
* Pointer to flow attributes
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_action_push_vlan(struct rte_eth_dev *dev,
uint64_t action_flags,
const struct rte_flow_item_vlan *vlan_m,
const struct rte_flow_action *action,
const struct rte_flow_attr *attr,
struct rte_flow_error *error)
{
const struct rte_flow_action_of_push_vlan *push_vlan = action->conf;
const struct mlx5_priv *priv = dev->data->dev_private;
if (push_vlan->ethertype != RTE_BE16(RTE_ETHER_TYPE_VLAN) &&
push_vlan->ethertype != RTE_BE16(RTE_ETHER_TYPE_QINQ))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"invalid vlan ethertype");
if (action_flags & MLX5_FLOW_ACTION_PORT_ID)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"wrong action order, port_id should "
"be after push VLAN");
if (!attr->transfer && priv->representor)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"push vlan action for VF representor "
"not supported on NIC table");
if (vlan_m &&
(vlan_m->tci & MLX5DV_FLOW_VLAN_PCP_MASK_BE) &&
(vlan_m->tci & MLX5DV_FLOW_VLAN_PCP_MASK_BE) !=
MLX5DV_FLOW_VLAN_PCP_MASK_BE &&
!(action_flags & MLX5_FLOW_ACTION_OF_SET_VLAN_PCP) &&
!(mlx5_flow_find_action
(action + 1, RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP)))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"not full match mask on VLAN PCP and "
"there is no of_set_vlan_pcp action, "
"push VLAN action cannot figure out "
"PCP value");
if (vlan_m &&
(vlan_m->tci & MLX5DV_FLOW_VLAN_VID_MASK_BE) &&
(vlan_m->tci & MLX5DV_FLOW_VLAN_VID_MASK_BE) !=
MLX5DV_FLOW_VLAN_VID_MASK_BE &&
!(action_flags & MLX5_FLOW_ACTION_OF_SET_VLAN_VID) &&
!(mlx5_flow_find_action
(action + 1, RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID)))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"not full match mask on VLAN VID and "
"there is no of_set_vlan_vid action, "
"push VLAN action cannot figure out "
"VID value");
(void)attr;
return 0;
}
/**
* Validate the set VLAN PCP.
*
* @param[in] action_flags
* Holds the actions detected until now.
* @param[in] actions
* Pointer to the list of actions remaining in the flow rule.
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_action_set_vlan_pcp(uint64_t action_flags,
const struct rte_flow_action actions[],
struct rte_flow_error *error)
{
const struct rte_flow_action *action = actions;
const struct rte_flow_action_of_set_vlan_pcp *conf = action->conf;
if (conf->vlan_pcp > 7)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"VLAN PCP value is too big");
if (!(action_flags & MLX5_FLOW_ACTION_OF_PUSH_VLAN))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"set VLAN PCP action must follow "
"the push VLAN action");
if (action_flags & MLX5_FLOW_ACTION_OF_SET_VLAN_PCP)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"Multiple VLAN PCP modification are "
"not supported");
if (action_flags & MLX5_FLOW_ACTION_PORT_ID)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"wrong action order, port_id should "
"be after set VLAN PCP");
return 0;
}
/**
* Validate the set VLAN VID.
*
* @param[in] item_flags
* Holds the items detected in this rule.
* @param[in] action_flags
* Holds the actions detected until now.
* @param[in] actions
* Pointer to the list of actions remaining in the flow rule.
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_action_set_vlan_vid(uint64_t item_flags,
uint64_t action_flags,
const struct rte_flow_action actions[],
struct rte_flow_error *error)
{
const struct rte_flow_action *action = actions;
const struct rte_flow_action_of_set_vlan_vid *conf = action->conf;
if (rte_be_to_cpu_16(conf->vlan_vid) > 0xFFE)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"VLAN VID value is too big");
if (!(action_flags & MLX5_FLOW_ACTION_OF_PUSH_VLAN) &&
!(item_flags & MLX5_FLOW_LAYER_OUTER_VLAN))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"set VLAN VID action must follow push"
" VLAN action or match on VLAN item");
if (action_flags & MLX5_FLOW_ACTION_OF_SET_VLAN_VID)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"Multiple VLAN VID modifications are "
"not supported");
if (action_flags & MLX5_FLOW_ACTION_PORT_ID)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"wrong action order, port_id should "
"be after set VLAN VID");
return 0;
}
/*
* Validate the FLAG action.
*
* @param[in] dev
* Pointer to the rte_eth_dev structure.
* @param[in] action_flags
* Holds the actions detected until now.
* @param[in] attr
* Pointer to flow attributes
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_action_flag(struct rte_eth_dev *dev,
uint64_t action_flags,
const struct rte_flow_attr *attr,
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_sh_config *config = &priv->sh->config;
int ret;
/* Fall back if no extended metadata register support. */
if (config->dv_xmeta_en == MLX5_XMETA_MODE_LEGACY)
return mlx5_flow_validate_action_flag(action_flags, attr,
error);
/* Extensive metadata mode requires registers. */
if (!mlx5_flow_ext_mreg_supported(dev))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"no metadata registers "
"to support flag action");
if (!(priv->sh->dv_mark_mask & MLX5_FLOW_MARK_DEFAULT))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"extended metadata register"
" isn't available");
ret = mlx5_flow_get_reg_id(dev, MLX5_FLOW_MARK, 0, error);
if (ret < 0)
return ret;
MLX5_ASSERT(ret > 0);
if (action_flags & MLX5_FLOW_ACTION_MARK)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"can't mark and flag in same flow");
if (action_flags & MLX5_FLOW_ACTION_FLAG)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"can't have 2 flag"
" actions in same flow");
return 0;
}
/**
* Validate MARK action.
*
* @param[in] dev
* Pointer to the rte_eth_dev structure.
* @param[in] action
* Pointer to action.
* @param[in] action_flags
* Holds the actions detected until now.
* @param[in] attr
* Pointer to flow attributes
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_action_mark(struct rte_eth_dev *dev,
const struct rte_flow_action *action,
uint64_t action_flags,
const struct rte_flow_attr *attr,
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_sh_config *config = &priv->sh->config;
const struct rte_flow_action_mark *mark = action->conf;
int ret;
if (is_tunnel_offload_active(dev))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"no mark action "
"if tunnel offload active");
/* Fall back if no extended metadata register support. */
if (config->dv_xmeta_en == MLX5_XMETA_MODE_LEGACY)
return mlx5_flow_validate_action_mark(action, action_flags,
attr, error);
/* Extensive metadata mode requires registers. */
if (!mlx5_flow_ext_mreg_supported(dev))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"no metadata registers "
"to support mark action");
if (!priv->sh->dv_mark_mask)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"extended metadata register"
" isn't available");
ret = mlx5_flow_get_reg_id(dev, MLX5_FLOW_MARK, 0, error);
if (ret < 0)
return ret;
MLX5_ASSERT(ret > 0);
if (!mark)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"configuration cannot be null");
if (mark->id >= (MLX5_FLOW_MARK_MAX & priv->sh->dv_mark_mask))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION_CONF,
&mark->id,
"mark id exceeds the limit");
if (action_flags & MLX5_FLOW_ACTION_FLAG)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"can't flag and mark in same flow");
if (action_flags & MLX5_FLOW_ACTION_MARK)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"can't have 2 mark actions in same"
" flow");
return 0;
}
/**
* Validate SET_META action.
*
* @param[in] dev
* Pointer to the rte_eth_dev structure.
* @param[in] action
* Pointer to the action structure.
* @param[in] action_flags
* Holds the actions detected until now.
* @param[in] attr
* Pointer to flow attributes
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_action_set_meta(struct rte_eth_dev *dev,
const struct rte_flow_action *action,
uint64_t action_flags __rte_unused,
const struct rte_flow_attr *attr,
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_sh_config *config = &priv->sh->config;
const struct rte_flow_action_set_meta *conf;
uint32_t nic_mask = UINT32_MAX;
int reg;
if (config->dv_xmeta_en != MLX5_XMETA_MODE_LEGACY &&
!mlx5_flow_ext_mreg_supported(dev))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"extended metadata register"
" isn't supported");
reg = flow_dv_get_metadata_reg(dev, attr, error);
if (reg < 0)
return reg;
if (reg == REG_NON)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"unavailable extended metadata register");
if (reg != REG_A && reg != REG_B) {
struct mlx5_priv *priv = dev->data->dev_private;
nic_mask = priv->sh->dv_meta_mask;
}
if (!(action->conf))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"configuration cannot be null");
conf = (const struct rte_flow_action_set_meta *)action->conf;
if (!conf->mask)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"zero mask doesn't have any effect");
if (conf->mask & ~nic_mask)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"meta data must be within reg C0");
return 0;
}
/**
* Validate SET_TAG action.
*
* @param[in] dev
* Pointer to the rte_eth_dev structure.
* @param[in] action
* Pointer to the action structure.
* @param[in] action_flags
* Holds the actions detected until now.
* @param[in] attr
* Pointer to flow attributes
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_action_set_tag(struct rte_eth_dev *dev,
const struct rte_flow_action *action,
uint64_t action_flags,
const struct rte_flow_attr *attr,
struct rte_flow_error *error)
{
const struct rte_flow_action_set_tag *conf;
const uint64_t terminal_action_flags =
MLX5_FLOW_ACTION_DROP | MLX5_FLOW_ACTION_QUEUE |
MLX5_FLOW_ACTION_RSS;
int ret;
if (!mlx5_flow_ext_mreg_supported(dev))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"extensive metadata register"
" isn't supported");
if (!(action->conf))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"configuration cannot be null");
conf = (const struct rte_flow_action_set_tag *)action->conf;
if (!conf->mask)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"zero mask doesn't have any effect");
ret = mlx5_flow_get_reg_id(dev, MLX5_APP_TAG, conf->index, error);
if (ret < 0)
return ret;
if (!attr->transfer && attr->ingress &&
(action_flags & terminal_action_flags))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"set_tag has no effect"
" with terminal actions");
return 0;
}
/**
* Indicates whether ASO aging is supported.
*
* @param[in] priv
* Pointer to device private context structure.
* @param[in] root
* Whether action is on root table.
*
* @return
* True when ASO aging is supported, false otherwise.
*/
static inline bool
flow_hit_aso_supported(const struct mlx5_priv *priv, bool root)
{
MLX5_ASSERT(priv);
return (priv->sh->flow_hit_aso_en && !root);
}
/**
* Validate count action.
*
* @param[in] dev
* Pointer to rte_eth_dev structure.
* @param[in] shared
* Indicator if action is shared.
* @param[in] action_flags
* Holds the actions detected until now.
* @param[in] root
* Whether action is on root table.
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_action_count(struct rte_eth_dev *dev, bool shared,
uint64_t action_flags,
bool root,
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
if (!priv->sh->cdev->config.devx)
goto notsup_err;
if (action_flags & MLX5_FLOW_ACTION_COUNT)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"duplicate count actions set");
if (shared && (action_flags & MLX5_FLOW_ACTION_AGE) &&
!flow_hit_aso_supported(priv, root))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"old age and indirect count combination is not supported");
#ifdef HAVE_IBV_FLOW_DEVX_COUNTERS
return 0;
#endif
notsup_err:
return rte_flow_error_set
(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"count action not supported");
}
/**
* Validate the L2 encap action.
*
* @param[in] dev
* Pointer to the rte_eth_dev structure.
* @param[in] action_flags
* Holds the actions detected until now.
* @param[in] action
* Pointer to the action structure.
* @param[in] attr
* Pointer to flow attributes.
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_action_l2_encap(struct rte_eth_dev *dev,
uint64_t action_flags,
const struct rte_flow_action *action,
const struct rte_flow_attr *attr,
struct rte_flow_error *error)
{
const struct mlx5_priv *priv = dev->data->dev_private;
if (!(action->conf))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"configuration cannot be null");
if (action_flags & MLX5_FLOW_ACTION_ENCAP)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"can only have a single encap action "
"in a flow");
if (!attr->transfer && priv->representor)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"encap action for VF representor "
"not supported on NIC table");
return 0;
}
/**
* Validate a decap action.
*
* @param[in] dev
* Pointer to the rte_eth_dev structure.
* @param[in] action_flags
* Holds the actions detected until now.
* @param[in] action
* Pointer to the action structure.
* @param[in] item_flags
* Holds the items detected.
* @param[in] attr
* Pointer to flow attributes
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_action_decap(struct rte_eth_dev *dev,
uint64_t action_flags,
const struct rte_flow_action *action,
const uint64_t item_flags,
const struct rte_flow_attr *attr,
struct rte_flow_error *error)
{
const struct mlx5_priv *priv = dev->data->dev_private;
if (priv->sh->cdev->config.hca_attr.scatter_fcs_w_decap_disable &&
!priv->sh->config.decap_en)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"decap is not enabled");
if (action_flags & MLX5_FLOW_XCAP_ACTIONS)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
action_flags &
MLX5_FLOW_ACTION_DECAP ? "can only "
"have a single decap action" : "decap "
"after encap is not supported");
if (action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"can't have decap action after"
" modify action");
if (attr->egress)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ATTR_EGRESS,
NULL,
"decap action not supported for "
"egress");
if (!attr->transfer && priv->representor)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"decap action for VF representor "
"not supported on NIC table");
if (action->type == RTE_FLOW_ACTION_TYPE_VXLAN_DECAP &&
!(item_flags & MLX5_FLOW_LAYER_VXLAN))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"VXLAN item should be present for VXLAN decap");
return 0;
}
const struct rte_flow_action_raw_decap empty_decap = {.data = NULL, .size = 0,};
/**
* Validate the raw encap and decap actions.
*
* @param[in] dev
* Pointer to the rte_eth_dev structure.
* @param[in] decap
* Pointer to the decap action.
* @param[in] encap
* Pointer to the encap action.
* @param[in] attr
* Pointer to flow attributes
* @param[in/out] action_flags
* Holds the actions detected until now.
* @param[out] actions_n
* pointer to the number of actions counter.
* @param[in] action
* Pointer to the action structure.
* @param[in] item_flags
* Holds the items detected.
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_action_raw_encap_decap
(struct rte_eth_dev *dev,
const struct rte_flow_action_raw_decap *decap,
const struct rte_flow_action_raw_encap *encap,
const struct rte_flow_attr *attr, uint64_t *action_flags,
int *actions_n, const struct rte_flow_action *action,
uint64_t item_flags, struct rte_flow_error *error)
{
const struct mlx5_priv *priv = dev->data->dev_private;
int ret;
if (encap && (!encap->size || !encap->data))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"raw encap data cannot be empty");
if (decap && encap) {
if (decap->size <= MLX5_ENCAPSULATION_DECISION_SIZE &&
encap->size > MLX5_ENCAPSULATION_DECISION_SIZE)
/* L3 encap. */
decap = NULL;
else if (encap->size <=
MLX5_ENCAPSULATION_DECISION_SIZE &&
decap->size >
MLX5_ENCAPSULATION_DECISION_SIZE)
/* L3 decap. */
encap = NULL;
else if (encap->size >
MLX5_ENCAPSULATION_DECISION_SIZE &&
decap->size >
MLX5_ENCAPSULATION_DECISION_SIZE)
/* 2 L2 actions: encap and decap. */
;
else
return rte_flow_error_set(error,
ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL, "unsupported too small "
"raw decap and too small raw "
"encap combination");
}
if (decap) {
ret = flow_dv_validate_action_decap(dev, *action_flags, action,
item_flags, attr, error);
if (ret < 0)
return ret;
*action_flags |= MLX5_FLOW_ACTION_DECAP;
++(*actions_n);
}
if (encap) {
if (encap->size <= MLX5_ENCAPSULATION_DECISION_SIZE)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"small raw encap size");
if (*action_flags & MLX5_FLOW_ACTION_ENCAP)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"more than one encap action");
if (!attr->transfer && priv->representor)
return rte_flow_error_set
(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"encap action for VF representor "
"not supported on NIC table");
*action_flags |= MLX5_FLOW_ACTION_ENCAP;
++(*actions_n);
}
return 0;
}
/*
* Validate the ASO CT action.
*
* @param[in] dev
* Pointer to the rte_eth_dev structure.
* @param[in] action_flags
* Holds the actions detected until now.
* @param[in] item_flags
* The items found in this flow rule.
* @param root
* Whether action is on root table.
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_action_aso_ct(struct rte_eth_dev *dev,
uint64_t action_flags,
uint64_t item_flags,
bool root,
struct rte_flow_error *error)
{
RTE_SET_USED(dev);
if (root)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"Only support non-root table");
if (action_flags & MLX5_FLOW_FATE_ACTIONS)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"CT cannot follow a fate action");
if ((action_flags & MLX5_FLOW_ACTION_METER) ||
(action_flags & MLX5_FLOW_ACTION_AGE))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"Only one ASO action is supported");
if (action_flags & MLX5_FLOW_ACTION_ENCAP)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"Encap cannot exist before CT");
if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L4_TCP))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"Not a outer TCP packet");
return 0;
}
/**
* Validate METER_COLOR item.
*
* @param[in] dev
* Pointer to the rte_eth_dev structure.
* @param[in] item
* Item specification.
* @param[in] attr
* Attributes of flow that includes this item.
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_item_meter_color(struct rte_eth_dev *dev,
const struct rte_flow_item *item,
const struct rte_flow_attr *attr __rte_unused,
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
const struct rte_flow_item_meter_color *spec = item->spec;
const struct rte_flow_item_meter_color *mask = item->mask;
struct rte_flow_item_meter_color nic_mask = {
.color = RTE_COLORS
};
int ret;
if (priv->mtr_color_reg == REG_NON)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM, item,
"meter color register"
" isn't available");
ret = mlx5_flow_get_reg_id(dev, MLX5_MTR_COLOR, 0, error);
if (ret < 0)
return ret;
if (!spec)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
item->spec,
"data cannot be empty");
if (spec->color > RTE_COLORS)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION_CONF,
&spec->color,
"meter color is invalid");
if (!mask)
mask = &rte_flow_item_meter_color_mask;
if (!mask->color)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM_SPEC, NULL,
"mask cannot be zero");
ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
(const uint8_t *)&nic_mask,
sizeof(struct rte_flow_item_meter_color),
MLX5_ITEM_RANGE_NOT_ACCEPTED, error);
if (ret < 0)
return ret;
return 0;
}
int
flow_dv_encap_decap_match_cb(void *tool_ctx __rte_unused,
struct mlx5_list_entry *entry, void *cb_ctx)
{
struct mlx5_flow_cb_ctx *ctx = cb_ctx;
struct mlx5_flow_dv_encap_decap_resource *ctx_resource = ctx->data;
struct mlx5_flow_dv_encap_decap_resource *resource;
resource = container_of(entry, struct mlx5_flow_dv_encap_decap_resource,
entry);
if (resource->reformat_type == ctx_resource->reformat_type &&
resource->ft_type == ctx_resource->ft_type &&
resource->flags == ctx_resource->flags &&
resource->size == ctx_resource->size &&
!memcmp((const void *)resource->buf,
(const void *)ctx_resource->buf,
resource->size))
return 0;
return -1;
}
struct mlx5_list_entry *
flow_dv_encap_decap_create_cb(void *tool_ctx, void *cb_ctx)
{
struct mlx5_dev_ctx_shared *sh = tool_ctx;
struct mlx5_flow_cb_ctx *ctx = cb_ctx;
struct mlx5dv_dr_domain *domain;
struct mlx5_flow_dv_encap_decap_resource *ctx_resource = ctx->data;
struct mlx5_flow_dv_encap_decap_resource *resource;
uint32_t idx;
int ret;
if (ctx_resource->ft_type == MLX5DV_FLOW_TABLE_TYPE_FDB)
domain = sh->fdb_domain;
else if (ctx_resource->ft_type == MLX5DV_FLOW_TABLE_TYPE_NIC_RX)
domain = sh->rx_domain;
else
domain = sh->tx_domain;
/* Register new encap/decap resource. */
resource = mlx5_ipool_zmalloc(sh->ipool[MLX5_IPOOL_DECAP_ENCAP], &idx);
if (!resource) {
rte_flow_error_set(ctx->error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"cannot allocate resource memory");
return NULL;
}
*resource = *ctx_resource;
resource->idx = idx;
ret = mlx5_flow_os_create_flow_action_packet_reformat(sh->cdev->ctx,
domain, resource,
&resource->action);
if (ret) {
mlx5_ipool_free(sh->ipool[MLX5_IPOOL_DECAP_ENCAP], idx);
rte_flow_error_set(ctx->error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL, "cannot create action");
return NULL;
}
return &resource->entry;
}
struct mlx5_list_entry *
flow_dv_encap_decap_clone_cb(void *tool_ctx, struct mlx5_list_entry *oentry,
void *cb_ctx)
{
struct mlx5_dev_ctx_shared *sh = tool_ctx;
struct mlx5_flow_cb_ctx *ctx = cb_ctx;
struct mlx5_flow_dv_encap_decap_resource *cache_resource;
uint32_t idx;
cache_resource = mlx5_ipool_malloc(sh->ipool[MLX5_IPOOL_DECAP_ENCAP],
&idx);
if (!cache_resource) {
rte_flow_error_set(ctx->error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"cannot allocate resource memory");
return NULL;
}
memcpy(cache_resource, oentry, sizeof(*cache_resource));
cache_resource->idx = idx;
return &cache_resource->entry;
}
void
flow_dv_encap_decap_clone_free_cb(void *tool_ctx, struct mlx5_list_entry *entry)
{
struct mlx5_dev_ctx_shared *sh = tool_ctx;
struct mlx5_flow_dv_encap_decap_resource *res =
container_of(entry, typeof(*res), entry);
mlx5_ipool_free(sh->ipool[MLX5_IPOOL_DECAP_ENCAP], res->idx);
}
/**
* Find existing encap/decap resource or create and register a new one.
*
* @param[in, out] dev
* Pointer to rte_eth_dev structure.
* @param[in, out] resource
* Pointer to encap/decap resource.
* @parm[in, out] dev_flow
* Pointer to the dev_flow.
* @param[out] error
* pointer to error structure.
*
* @return
* 0 on success otherwise -errno and errno is set.
*/
static int
flow_dv_encap_decap_resource_register
(struct rte_eth_dev *dev,
struct mlx5_flow_dv_encap_decap_resource *resource,
struct mlx5_flow *dev_flow,
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_dev_ctx_shared *sh = priv->sh;
struct mlx5_list_entry *entry;
union {
struct {
uint32_t ft_type:8;
uint32_t refmt_type:8;
/*
* Header reformat actions can be shared between
* non-root tables. One bit to indicate non-root
* table or not.
*/
uint32_t is_root:1;
uint32_t reserve:15;
};
uint32_t v32;
} encap_decap_key = {
{
.ft_type = resource->ft_type,
.refmt_type = resource->reformat_type,
.is_root = !!dev_flow->dv.group,
.reserve = 0,
}
};
struct mlx5_flow_cb_ctx ctx = {
.error = error,
.data = resource,
};
struct mlx5_hlist *encaps_decaps;
uint64_t key64;
encaps_decaps = flow_dv_hlist_prepare(sh, &sh->encaps_decaps,
"encaps_decaps",
MLX5_FLOW_ENCAP_DECAP_HTABLE_SZ,
true, true, sh,
flow_dv_encap_decap_create_cb,
flow_dv_encap_decap_match_cb,
flow_dv_encap_decap_remove_cb,
flow_dv_encap_decap_clone_cb,
flow_dv_encap_decap_clone_free_cb,
error);
if (unlikely(!encaps_decaps))
return -rte_errno;
resource->flags = dev_flow->dv.group ? 0 : 1;
key64 = __rte_raw_cksum(&encap_decap_key.v32,
sizeof(encap_decap_key.v32), 0);
if (resource->reformat_type !=
MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L2_TUNNEL_TO_L2 &&
resource->size)
key64 = __rte_raw_cksum(resource->buf, resource->size, key64);
entry = mlx5_hlist_register(encaps_decaps, key64, &ctx);
if (!entry)
return -rte_errno;
resource = container_of(entry, typeof(*resource), entry);
dev_flow->dv.encap_decap = resource;
dev_flow->handle->dvh.rix_encap_decap = resource->idx;
return 0;
}
/**
* Find existing table jump resource or create and register a new one.
*
* @param[in, out] dev
* Pointer to rte_eth_dev structure.
* @param[in, out] tbl
* Pointer to flow table resource.
* @parm[in, out] dev_flow
* Pointer to the dev_flow.
* @param[out] error
* pointer to error structure.
*
* @return
* 0 on success otherwise -errno and errno is set.
*/
static int
flow_dv_jump_tbl_resource_register
(struct rte_eth_dev *dev __rte_unused,
struct mlx5_flow_tbl_resource *tbl,
struct mlx5_flow *dev_flow,
struct rte_flow_error *error __rte_unused)
{
struct mlx5_flow_tbl_data_entry *tbl_data =
container_of(tbl, struct mlx5_flow_tbl_data_entry, tbl);
MLX5_ASSERT(tbl);
MLX5_ASSERT(tbl_data->jump.action);
dev_flow->handle->rix_jump = tbl_data->idx;
dev_flow->dv.jump = &tbl_data->jump;
return 0;
}
int
flow_dv_port_id_match_cb(void *tool_ctx __rte_unused,
struct mlx5_list_entry *entry, void *cb_ctx)
{
struct mlx5_flow_cb_ctx *ctx = cb_ctx;
struct mlx5_flow_dv_port_id_action_resource *ref = ctx->data;
struct mlx5_flow_dv_port_id_action_resource *res =
container_of(entry, typeof(*res), entry);
return ref->port_id != res->port_id;
}
struct mlx5_list_entry *
flow_dv_port_id_create_cb(void *tool_ctx, void *cb_ctx)
{
struct mlx5_dev_ctx_shared *sh = tool_ctx;
struct mlx5_flow_cb_ctx *ctx = cb_ctx;
struct mlx5_flow_dv_port_id_action_resource *ref = ctx->data;
struct mlx5_flow_dv_port_id_action_resource *resource;
uint32_t idx;
int ret;
/* Register new port id action resource. */
resource = mlx5_ipool_zmalloc(sh->ipool[MLX5_IPOOL_PORT_ID], &idx);
if (!resource) {
rte_flow_error_set(ctx->error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"cannot allocate port_id action memory");
return NULL;
}
*resource = *ref;
ret = mlx5_flow_os_create_flow_action_dest_port(sh->fdb_domain,
ref->port_id,
&resource->action);
if (ret) {
mlx5_ipool_free(sh->ipool[MLX5_IPOOL_PORT_ID], idx);
rte_flow_error_set(ctx->error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"cannot create action");
return NULL;
}
resource->idx = idx;
return &resource->entry;
}
struct mlx5_list_entry *
flow_dv_port_id_clone_cb(void *tool_ctx,
struct mlx5_list_entry *entry __rte_unused,
void *cb_ctx)
{
struct mlx5_dev_ctx_shared *sh = tool_ctx;
struct mlx5_flow_cb_ctx *ctx = cb_ctx;
struct mlx5_flow_dv_port_id_action_resource *resource;
uint32_t idx;
resource = mlx5_ipool_zmalloc(sh->ipool[MLX5_IPOOL_PORT_ID], &idx);
if (!resource) {
rte_flow_error_set(ctx->error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"cannot allocate port_id action memory");
return NULL;
}
memcpy(resource, entry, sizeof(*resource));
resource->idx = idx;
return &resource->entry;
}
void
flow_dv_port_id_clone_free_cb(void *tool_ctx, struct mlx5_list_entry *entry)
{
struct mlx5_dev_ctx_shared *sh = tool_ctx;
struct mlx5_flow_dv_port_id_action_resource *resource =
container_of(entry, typeof(*resource), entry);
mlx5_ipool_free(sh->ipool[MLX5_IPOOL_PORT_ID], resource->idx);
}
/**
* Find existing table port ID resource or create and register a new one.
*
* @param[in, out] dev
* Pointer to rte_eth_dev structure.
* @param[in, out] ref
* Pointer to port ID action resource reference.
* @parm[in, out] dev_flow
* Pointer to the dev_flow.
* @param[out] error
* pointer to error structure.
*
* @return
* 0 on success otherwise -errno and errno is set.
*/
static int
flow_dv_port_id_action_resource_register
(struct rte_eth_dev *dev,
struct mlx5_flow_dv_port_id_action_resource *ref,
struct mlx5_flow *dev_flow,
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_list_entry *entry;
struct mlx5_flow_dv_port_id_action_resource *resource;
struct mlx5_flow_cb_ctx ctx = {
.error = error,
.data = ref,
};
entry = mlx5_list_register(priv->sh->port_id_action_list, &ctx);
if (!entry)
return -rte_errno;
resource = container_of(entry, typeof(*resource), entry);
dev_flow->dv.port_id_action = resource;
dev_flow->handle->rix_port_id_action = resource->idx;
return 0;
}
int
flow_dv_push_vlan_match_cb(void *tool_ctx __rte_unused,
struct mlx5_list_entry *entry, void *cb_ctx)
{
struct mlx5_flow_cb_ctx *ctx = cb_ctx;
struct mlx5_flow_dv_push_vlan_action_resource *ref = ctx->data;
struct mlx5_flow_dv_push_vlan_action_resource *res =
container_of(entry, typeof(*res), entry);
return ref->vlan_tag != res->vlan_tag || ref->ft_type != res->ft_type;
}
struct mlx5_list_entry *
flow_dv_push_vlan_create_cb(void *tool_ctx, void *cb_ctx)
{
struct mlx5_dev_ctx_shared *sh = tool_ctx;
struct mlx5_flow_cb_ctx *ctx = cb_ctx;
struct mlx5_flow_dv_push_vlan_action_resource *ref = ctx->data;
struct mlx5_flow_dv_push_vlan_action_resource *resource;
struct mlx5dv_dr_domain *domain;
uint32_t idx;
int ret;
/* Register new port id action resource. */
resource = mlx5_ipool_zmalloc(sh->ipool[MLX5_IPOOL_PUSH_VLAN], &idx);
if (!resource) {
rte_flow_error_set(ctx->error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"cannot allocate push_vlan action memory");
return NULL;
}
*resource = *ref;
if (ref->ft_type == MLX5DV_FLOW_TABLE_TYPE_FDB)
domain = sh->fdb_domain;
else if (ref->ft_type == MLX5DV_FLOW_TABLE_TYPE_NIC_RX)
domain = sh->rx_domain;
else
domain = sh->tx_domain;
ret = mlx5_flow_os_create_flow_action_push_vlan(domain, ref->vlan_tag,
&resource->action);
if (ret) {
mlx5_ipool_free(sh->ipool[MLX5_IPOOL_PUSH_VLAN], idx);
rte_flow_error_set(ctx->error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"cannot create push vlan action");
return NULL;
}
resource->idx = idx;
return &resource->entry;
}
struct mlx5_list_entry *
flow_dv_push_vlan_clone_cb(void *tool_ctx,
struct mlx5_list_entry *entry __rte_unused,
void *cb_ctx)
{
struct mlx5_dev_ctx_shared *sh = tool_ctx;
struct mlx5_flow_cb_ctx *ctx = cb_ctx;
struct mlx5_flow_dv_push_vlan_action_resource *resource;
uint32_t idx;
resource = mlx5_ipool_zmalloc(sh->ipool[MLX5_IPOOL_PUSH_VLAN], &idx);
if (!resource) {
rte_flow_error_set(ctx->error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"cannot allocate push_vlan action memory");
return NULL;
}
memcpy(resource, entry, sizeof(*resource));
resource->idx = idx;
return &resource->entry;
}
void
flow_dv_push_vlan_clone_free_cb(void *tool_ctx, struct mlx5_list_entry *entry)
{
struct mlx5_dev_ctx_shared *sh = tool_ctx;
struct mlx5_flow_dv_push_vlan_action_resource *resource =
container_of(entry, typeof(*resource), entry);
mlx5_ipool_free(sh->ipool[MLX5_IPOOL_PUSH_VLAN], resource->idx);
}
/**
* Find existing push vlan resource or create and register a new one.
*
* @param [in, out] dev
* Pointer to rte_eth_dev structure.
* @param[in, out] ref
* Pointer to port ID action resource reference.
* @parm[in, out] dev_flow
* Pointer to the dev_flow.
* @param[out] error
* pointer to error structure.
*
* @return
* 0 on success otherwise -errno and errno is set.
*/
static int
flow_dv_push_vlan_action_resource_register
(struct rte_eth_dev *dev,
struct mlx5_flow_dv_push_vlan_action_resource *ref,
struct mlx5_flow *dev_flow,
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_flow_dv_push_vlan_action_resource *resource;
struct mlx5_list_entry *entry;
struct mlx5_flow_cb_ctx ctx = {
.error = error,
.data = ref,
};
entry = mlx5_list_register(priv->sh->push_vlan_action_list, &ctx);
if (!entry)
return -rte_errno;
resource = container_of(entry, typeof(*resource), entry);
dev_flow->handle->dvh.rix_push_vlan = resource->idx;
dev_flow->dv.push_vlan_res = resource;
return 0;
}
/**
* Get the size of specific rte_flow_item_type hdr size
*
* @param[in] item_type
* Tested rte_flow_item_type.
*
* @return
* sizeof struct item_type, 0 if void or irrelevant.
*/
size_t
flow_dv_get_item_hdr_len(const enum rte_flow_item_type item_type)
{
size_t retval;
switch (item_type) {
case RTE_FLOW_ITEM_TYPE_ETH:
retval = sizeof(struct rte_ether_hdr);
break;
case RTE_FLOW_ITEM_TYPE_VLAN:
retval = sizeof(struct rte_vlan_hdr);
break;
case RTE_FLOW_ITEM_TYPE_IPV4:
retval = sizeof(struct rte_ipv4_hdr);
break;
case RTE_FLOW_ITEM_TYPE_IPV6:
retval = sizeof(struct rte_ipv6_hdr);
break;
case RTE_FLOW_ITEM_TYPE_UDP:
retval = sizeof(struct rte_udp_hdr);
break;
case RTE_FLOW_ITEM_TYPE_TCP:
retval = sizeof(struct rte_tcp_hdr);
break;
case RTE_FLOW_ITEM_TYPE_VXLAN:
case RTE_FLOW_ITEM_TYPE_VXLAN_GPE:
retval = sizeof(struct rte_vxlan_hdr);
break;
case RTE_FLOW_ITEM_TYPE_GRE:
case RTE_FLOW_ITEM_TYPE_NVGRE:
retval = sizeof(struct rte_gre_hdr);
break;
case RTE_FLOW_ITEM_TYPE_MPLS:
retval = sizeof(struct rte_mpls_hdr);
break;
case RTE_FLOW_ITEM_TYPE_VOID: /* Fall through. */
default:
retval = 0;
break;
}
return retval;
}
#define MLX5_ENCAP_IPV4_VERSION 0x40
#define MLX5_ENCAP_IPV4_IHL_MIN 0x05
#define MLX5_ENCAP_IPV4_TTL_DEF 0x40
#define MLX5_ENCAP_IPV6_VTC_FLOW 0x60000000
#define MLX5_ENCAP_IPV6_HOP_LIMIT 0xff
#define MLX5_ENCAP_VXLAN_FLAGS 0x08000000
#define MLX5_ENCAP_VXLAN_GPE_FLAGS 0x04
/**
* Convert the encap action data from list of rte_flow_item to raw buffer
*
* @param[in] items
* Pointer to rte_flow_item objects list.
* @param[out] buf
* Pointer to the output buffer.
* @param[out] size
* Pointer to the output buffer size.
* @param[out] error
* Pointer to the error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
flow_dv_convert_encap_data(const struct rte_flow_item *items, uint8_t *buf,
size_t *size, struct rte_flow_error *error)
{
struct rte_ether_hdr *eth = NULL;
struct rte_vlan_hdr *vlan = NULL;
struct rte_ipv4_hdr *ipv4 = NULL;
struct rte_ipv6_hdr *ipv6 = NULL;
struct rte_udp_hdr *udp = NULL;
struct rte_vxlan_hdr *vxlan = NULL;
struct rte_vxlan_gpe_hdr *vxlan_gpe = NULL;
struct rte_gre_hdr *gre = NULL;
size_t len;
size_t temp_size = 0;
if (!items)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL, "invalid empty data");
for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
len = flow_dv_get_item_hdr_len(items->type);
if (len + temp_size > MLX5_ENCAP_MAX_LEN)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
(void *)items->type,
"items total size is too big"
" for encap action");
rte_memcpy((void *)&buf[temp_size], items->spec, len);
switch (items->type) {
case RTE_FLOW_ITEM_TYPE_ETH:
eth = (struct rte_ether_hdr *)&buf[temp_size];
break;
case RTE_FLOW_ITEM_TYPE_VLAN:
vlan = (struct rte_vlan_hdr *)&buf[temp_size];
if (!eth)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
(void *)items->type,
"eth header not found");
if (!eth->ether_type)
eth->ether_type = RTE_BE16(RTE_ETHER_TYPE_VLAN);
break;
case RTE_FLOW_ITEM_TYPE_IPV4:
ipv4 = (struct rte_ipv4_hdr *)&buf[temp_size];
if (!vlan && !eth)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
(void *)items->type,
"neither eth nor vlan"
" header found");
if (vlan && !vlan->eth_proto)
vlan->eth_proto = RTE_BE16(RTE_ETHER_TYPE_IPV4);
else if (eth && !eth->ether_type)
eth->ether_type = RTE_BE16(RTE_ETHER_TYPE_IPV4);
if (!ipv4->version_ihl)
ipv4->version_ihl = MLX5_ENCAP_IPV4_VERSION |
MLX5_ENCAP_IPV4_IHL_MIN;
if (!ipv4->time_to_live)
ipv4->time_to_live = MLX5_ENCAP_IPV4_TTL_DEF;
break;
case RTE_FLOW_ITEM_TYPE_IPV6:
ipv6 = (struct rte_ipv6_hdr *)&buf[temp_size];
if (!vlan && !eth)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
(void *)items->type,
"neither eth nor vlan"
" header found");
if (vlan && !vlan->eth_proto)
vlan->eth_proto = RTE_BE16(RTE_ETHER_TYPE_IPV6);
else if (eth && !eth->ether_type)
eth->ether_type = RTE_BE16(RTE_ETHER_TYPE_IPV6);
if (!ipv6->vtc_flow)
ipv6->vtc_flow =
RTE_BE32(MLX5_ENCAP_IPV6_VTC_FLOW);
if (!ipv6->hop_limits)
ipv6->hop_limits = MLX5_ENCAP_IPV6_HOP_LIMIT;
break;
case RTE_FLOW_ITEM_TYPE_UDP:
udp = (struct rte_udp_hdr *)&buf[temp_size];
if (!ipv4 && !ipv6)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
(void *)items->type,
"ip header not found");
if (ipv4 && !ipv4->next_proto_id)
ipv4->next_proto_id = IPPROTO_UDP;
else if (ipv6 && !ipv6->proto)
ipv6->proto = IPPROTO_UDP;
break;
case RTE_FLOW_ITEM_TYPE_VXLAN:
vxlan = (struct rte_vxlan_hdr *)&buf[temp_size];
if (!udp)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
(void *)items->type,
"udp header not found");
if (!udp->dst_port)
udp->dst_port = RTE_BE16(MLX5_UDP_PORT_VXLAN);
if (!vxlan->vx_flags)
vxlan->vx_flags =
RTE_BE32(MLX5_ENCAP_VXLAN_FLAGS);
break;
case RTE_FLOW_ITEM_TYPE_VXLAN_GPE:
vxlan_gpe = (struct rte_vxlan_gpe_hdr *)&buf[temp_size];
if (!udp)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
(void *)items->type,
"udp header not found");
if (!vxlan_gpe->proto)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
(void *)items->type,
"next protocol not found");
if (!udp->dst_port)
udp->dst_port =
RTE_BE16(MLX5_UDP_PORT_VXLAN_GPE);
if (!vxlan_gpe->vx_flags)
vxlan_gpe->vx_flags =
MLX5_ENCAP_VXLAN_GPE_FLAGS;
break;
case RTE_FLOW_ITEM_TYPE_GRE:
case RTE_FLOW_ITEM_TYPE_NVGRE:
gre = (struct rte_gre_hdr *)&buf[temp_size];
if (!gre->proto)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
(void *)items->type,
"next protocol not found");
if (!ipv4 && !ipv6)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
(void *)items->type,
"ip header not found");
if (ipv4 && !ipv4->next_proto_id)
ipv4->next_proto_id = IPPROTO_GRE;
else if (ipv6 && !ipv6->proto)
ipv6->proto = IPPROTO_GRE;
break;
case RTE_FLOW_ITEM_TYPE_VOID:
break;
default:
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
(void *)items->type,
"unsupported item type");
break;
}
temp_size += len;
}
*size = temp_size;
return 0;
}
static int
flow_dv_zero_encap_udp_csum(void *data, struct rte_flow_error *error)
{
struct rte_ether_hdr *eth = NULL;
struct rte_vlan_hdr *vlan = NULL;
struct rte_ipv6_hdr *ipv6 = NULL;
struct rte_udp_hdr *udp = NULL;
char *next_hdr;
uint16_t proto;
eth = (struct rte_ether_hdr *)data;
next_hdr = (char *)(eth + 1);
proto = RTE_BE16(eth->ether_type);
/* VLAN skipping */
while (proto == RTE_ETHER_TYPE_VLAN || proto == RTE_ETHER_TYPE_QINQ) {
vlan = (struct rte_vlan_hdr *)next_hdr;
proto = RTE_BE16(vlan->eth_proto);
next_hdr += sizeof(struct rte_vlan_hdr);
}
/* HW calculates IPv4 csum. no need to proceed */
if (proto == RTE_ETHER_TYPE_IPV4)
return 0;
/* non IPv4/IPv6 header. not supported */
if (proto != RTE_ETHER_TYPE_IPV6) {
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL, "Cannot offload non IPv4/IPv6");
}
ipv6 = (struct rte_ipv6_hdr *)next_hdr;
/* ignore non UDP */
if (ipv6->proto != IPPROTO_UDP)
return 0;
udp = (struct rte_udp_hdr *)(ipv6 + 1);
udp->dgram_cksum = 0;
return 0;
}
/**
* Convert L2 encap action to DV specification.
*
* @param[in] dev
* Pointer to rte_eth_dev structure.
* @param[in] action
* Pointer to action structure.
* @param[in, out] dev_flow
* Pointer to the mlx5_flow.
* @param[in] transfer
* Mark if the flow is E-Switch flow.
* @param[out] error
* Pointer to the error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_create_action_l2_encap(struct rte_eth_dev *dev,
const struct rte_flow_action *action,
struct mlx5_flow *dev_flow,
uint8_t transfer,
struct rte_flow_error *error)
{
const struct rte_flow_item *encap_data;
const struct rte_flow_action_raw_encap *raw_encap_data;
struct mlx5_flow_dv_encap_decap_resource res = {
.reformat_type =
MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L2_TO_L2_TUNNEL,
.ft_type = transfer ? MLX5DV_FLOW_TABLE_TYPE_FDB :
MLX5DV_FLOW_TABLE_TYPE_NIC_TX,
};
if (action->type == RTE_FLOW_ACTION_TYPE_RAW_ENCAP) {
raw_encap_data =
(const struct rte_flow_action_raw_encap *)action->conf;
res.size = raw_encap_data->size;
memcpy(res.buf, raw_encap_data->data, res.size);
} else {
if (action->type == RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP)
encap_data =
((const struct rte_flow_action_vxlan_encap *)
action->conf)->definition;
else
encap_data =
((const struct rte_flow_action_nvgre_encap *)
action->conf)->definition;
if (flow_dv_convert_encap_data(encap_data, res.buf,
&res.size, error))
return -rte_errno;
}
if (flow_dv_zero_encap_udp_csum(res.buf, error))
return -rte_errno;
if (flow_dv_encap_decap_resource_register(dev, &res, dev_flow, error))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL, "can't create L2 encap action");
return 0;
}
/**
* Convert L2 decap action to DV specification.
*
* @param[in] dev
* Pointer to rte_eth_dev structure.
* @param[in, out] dev_flow
* Pointer to the mlx5_flow.
* @param[in] transfer
* Mark if the flow is E-Switch flow.
* @param[out] error
* Pointer to the error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_create_action_l2_decap(struct rte_eth_dev *dev,
struct mlx5_flow *dev_flow,
uint8_t transfer,
struct rte_flow_error *error)
{
struct mlx5_flow_dv_encap_decap_resource res = {
.size = 0,
.reformat_type =
MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L2_TUNNEL_TO_L2,
.ft_type = transfer ? MLX5DV_FLOW_TABLE_TYPE_FDB :
MLX5DV_FLOW_TABLE_TYPE_NIC_RX,
};
if (flow_dv_encap_decap_resource_register(dev, &res, dev_flow, error))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL, "can't create L2 decap action");
return 0;
}
/**
* Convert raw decap/encap (L3 tunnel) action to DV specification.
*
* @param[in] dev
* Pointer to rte_eth_dev structure.
* @param[in] action
* Pointer to action structure.
* @param[in, out] dev_flow
* Pointer to the mlx5_flow.
* @param[in] attr
* Pointer to the flow attributes.
* @param[out] error
* Pointer to the error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_create_action_raw_encap(struct rte_eth_dev *dev,
const struct rte_flow_action *action,
struct mlx5_flow *dev_flow,
const struct rte_flow_attr *attr,
struct rte_flow_error *error)
{
const struct rte_flow_action_raw_encap *encap_data;
struct mlx5_flow_dv_encap_decap_resource res;
memset(&res, 0, sizeof(res));
encap_data = (const struct rte_flow_action_raw_encap *)action->conf;
res.size = encap_data->size;
memcpy(res.buf, encap_data->data, res.size);
res.reformat_type = res.size < MLX5_ENCAPSULATION_DECISION_SIZE ?
MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L3_TUNNEL_TO_L2 :
MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L2_TO_L3_TUNNEL;
if (attr->transfer)
res.ft_type = MLX5DV_FLOW_TABLE_TYPE_FDB;
else
res.ft_type = attr->egress ? MLX5DV_FLOW_TABLE_TYPE_NIC_TX :
MLX5DV_FLOW_TABLE_TYPE_NIC_RX;
if (flow_dv_encap_decap_resource_register(dev, &res, dev_flow, error))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL, "can't create encap action");
return 0;
}
/**
* Create action push VLAN.
*
* @param[in] dev
* Pointer to rte_eth_dev structure.
* @param[in] attr
* Pointer to the flow attributes.
* @param[in] vlan
* Pointer to the vlan to push to the Ethernet header.
* @param[in, out] dev_flow
* Pointer to the mlx5_flow.
* @param[out] error
* Pointer to the error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_create_action_push_vlan(struct rte_eth_dev *dev,
const struct rte_flow_attr *attr,
const struct rte_vlan_hdr *vlan,
struct mlx5_flow *dev_flow,
struct rte_flow_error *error)
{
struct mlx5_flow_dv_push_vlan_action_resource res;
memset(&res, 0, sizeof(res));
res.vlan_tag =
rte_cpu_to_be_32(((uint32_t)vlan->eth_proto) << 16 |
vlan->vlan_tci);
if (attr->transfer)
res.ft_type = MLX5DV_FLOW_TABLE_TYPE_FDB;
else
res.ft_type = attr->egress ? MLX5DV_FLOW_TABLE_TYPE_NIC_TX :
MLX5DV_FLOW_TABLE_TYPE_NIC_RX;
return flow_dv_push_vlan_action_resource_register
(dev, &res, dev_flow, error);
}
/**
* Validate the modify-header actions.
*
* @param[in] action_flags
* Holds the actions detected until now.
* @param[in] action
* Pointer to the modify action.
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_action_modify_hdr(const uint64_t action_flags,
const struct rte_flow_action *action,
struct rte_flow_error *error)
{
if (action->type != RTE_FLOW_ACTION_TYPE_DEC_TTL && !action->conf)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION_CONF,
NULL, "action configuration not set");
if (action_flags & MLX5_FLOW_ACTION_ENCAP)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"can't have encap action before"
" modify action");
return 0;
}
/**
* Validate the modify-header MAC address actions.
*
* @param[in] action_flags
* Holds the actions detected until now.
* @param[in] action
* Pointer to the modify action.
* @param[in] item_flags
* Holds the items detected.
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_action_modify_mac(const uint64_t action_flags,
const struct rte_flow_action *action,
const uint64_t item_flags,
struct rte_flow_error *error)
{
int ret = 0;
ret = flow_dv_validate_action_modify_hdr(action_flags, action, error);
if (!ret) {
if (!(item_flags & MLX5_FLOW_LAYER_L2))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"no L2 item in pattern");
}
return ret;
}
/**
* Validate the modify-header IPv4 address actions.
*
* @param[in] action_flags
* Holds the actions detected until now.
* @param[in] action
* Pointer to the modify action.
* @param[in] item_flags
* Holds the items detected.
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_action_modify_ipv4(const uint64_t action_flags,
const struct rte_flow_action *action,
const uint64_t item_flags,
struct rte_flow_error *error)
{
int ret = 0;
uint64_t layer;
ret = flow_dv_validate_action_modify_hdr(action_flags, action, error);
if (!ret) {
layer = (action_flags & MLX5_FLOW_ACTION_DECAP) ?
MLX5_FLOW_LAYER_INNER_L3_IPV4 :
MLX5_FLOW_LAYER_OUTER_L3_IPV4;
if (!(item_flags & layer))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"no ipv4 item in pattern");
}
return ret;
}
/**
* Validate the modify-header IPv6 address actions.
*
* @param[in] action_flags
* Holds the actions detected until now.
* @param[in] action
* Pointer to the modify action.
* @param[in] item_flags
* Holds the items detected.
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_action_modify_ipv6(const uint64_t action_flags,
const struct rte_flow_action *action,
const uint64_t item_flags,
struct rte_flow_error *error)
{
int ret = 0;
uint64_t layer;
ret = flow_dv_validate_action_modify_hdr(action_flags, action, error);
if (!ret) {
layer = (action_flags & MLX5_FLOW_ACTION_DECAP) ?
MLX5_FLOW_LAYER_INNER_L3_IPV6 :
MLX5_FLOW_LAYER_OUTER_L3_IPV6;
if (!(item_flags & layer))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"no ipv6 item in pattern");
}
return ret;
}
/**
* Validate the modify-header TP actions.
*
* @param[in] action_flags
* Holds the actions detected until now.
* @param[in] action
* Pointer to the modify action.
* @param[in] item_flags
* Holds the items detected.
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_action_modify_tp(const uint64_t action_flags,
const struct rte_flow_action *action,
const uint64_t item_flags,
struct rte_flow_error *error)
{
int ret = 0;
uint64_t layer;
ret = flow_dv_validate_action_modify_hdr(action_flags, action, error);
if (!ret) {
layer = (action_flags & MLX5_FLOW_ACTION_DECAP) ?
MLX5_FLOW_LAYER_INNER_L4 :
MLX5_FLOW_LAYER_OUTER_L4;
if (!(item_flags & layer))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL, "no transport layer "
"in pattern");
}
return ret;
}
/**
* Validate the modify-header actions of increment/decrement
* TCP Sequence-number.
*
* @param[in] action_flags
* Holds the actions detected until now.
* @param[in] action
* Pointer to the modify action.
* @param[in] item_flags
* Holds the items detected.
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_action_modify_tcp_seq(const uint64_t action_flags,
const struct rte_flow_action *action,
const uint64_t item_flags,
struct rte_flow_error *error)
{
int ret = 0;
uint64_t layer;
ret = flow_dv_validate_action_modify_hdr(action_flags, action, error);
if (!ret) {
layer = (action_flags & MLX5_FLOW_ACTION_DECAP) ?
MLX5_FLOW_LAYER_INNER_L4_TCP :
MLX5_FLOW_LAYER_OUTER_L4_TCP;
if (!(item_flags & layer))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL, "no TCP item in"
" pattern");
if ((action->type == RTE_FLOW_ACTION_TYPE_INC_TCP_SEQ &&
(action_flags & MLX5_FLOW_ACTION_DEC_TCP_SEQ)) ||
(action->type == RTE_FLOW_ACTION_TYPE_DEC_TCP_SEQ &&
(action_flags & MLX5_FLOW_ACTION_INC_TCP_SEQ)))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"cannot decrease and increase"
" TCP sequence number"
" at the same time");
}
return ret;
}
/**
* Validate the modify-header actions of increment/decrement
* TCP Acknowledgment number.
*
* @param[in] action_flags
* Holds the actions detected until now.
* @param[in] action
* Pointer to the modify action.
* @param[in] item_flags
* Holds the items detected.
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_action_modify_tcp_ack(const uint64_t action_flags,
const struct rte_flow_action *action,
const uint64_t item_flags,
struct rte_flow_error *error)
{
int ret = 0;
uint64_t layer;
ret = flow_dv_validate_action_modify_hdr(action_flags, action, error);
if (!ret) {
layer = (action_flags & MLX5_FLOW_ACTION_DECAP) ?
MLX5_FLOW_LAYER_INNER_L4_TCP :
MLX5_FLOW_LAYER_OUTER_L4_TCP;
if (!(item_flags & layer))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL, "no TCP item in"
" pattern");
if ((action->type == RTE_FLOW_ACTION_TYPE_INC_TCP_ACK &&
(action_flags & MLX5_FLOW_ACTION_DEC_TCP_ACK)) ||
(action->type == RTE_FLOW_ACTION_TYPE_DEC_TCP_ACK &&
(action_flags & MLX5_FLOW_ACTION_INC_TCP_ACK)))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"cannot decrease and increase"
" TCP acknowledgment number"
" at the same time");
}
return ret;
}
/**
* Validate the modify-header TTL actions.
*
* @param[in] action_flags
* Holds the actions detected until now.
* @param[in] action
* Pointer to the modify action.
* @param[in] item_flags
* Holds the items detected.
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_action_modify_ttl(const uint64_t action_flags,
const struct rte_flow_action *action,
const uint64_t item_flags,
struct rte_flow_error *error)
{
int ret = 0;
uint64_t layer;
ret = flow_dv_validate_action_modify_hdr(action_flags, action, error);
if (!ret) {
layer = (action_flags & MLX5_FLOW_ACTION_DECAP) ?
MLX5_FLOW_LAYER_INNER_L3 :
MLX5_FLOW_LAYER_OUTER_L3;
if (!(item_flags & layer))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"no IP protocol in pattern");
}
return ret;
}
/**
* Validate the generic modify field actions.
* @param[in] dev
* Pointer to the rte_eth_dev structure.
* @param[in] action_flags
* Holds the actions detected until now.
* @param[in] action
* Pointer to the modify action.
* @param[in] attr
* Pointer to the flow attributes.
* @param root
* Whether action is on root table.
* @param[out] error
* Pointer to error structure.
*
* @return
* Number of header fields to modify (0 or more) on success,
* a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_action_modify_field(struct rte_eth_dev *dev,
const uint64_t action_flags,
const struct rte_flow_action *action,
const struct rte_flow_attr *attr,
bool root,
struct rte_flow_error *error)
{
int ret = 0;
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_sh_config *config = &priv->sh->config;
struct mlx5_hca_attr *hca_attr = &priv->sh->cdev->config.hca_attr;
const struct rte_flow_action_modify_field *action_modify_field =
action->conf;
uint32_t dst_width = mlx5_flow_item_field_width(dev,
action_modify_field->dst.field,
-1, attr, error);
uint32_t src_width = mlx5_flow_item_field_width(dev,
action_modify_field->src.field,
dst_width, attr, error);
ret = flow_dv_validate_action_modify_hdr(action_flags, action, error);
if (ret)
return ret;
if (action_modify_field->width == 0)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"no bits are requested to be modified");
else if (action_modify_field->width > dst_width ||
action_modify_field->width > src_width)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"cannot modify more bits than"
" the width of a field");
if (action_modify_field->dst.field != RTE_FLOW_FIELD_VALUE &&
action_modify_field->dst.field != RTE_FLOW_FIELD_POINTER) {
if ((action_modify_field->dst.offset +
action_modify_field->width > dst_width) ||
(action_modify_field->dst.offset % 32))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"destination offset is too big"
" or not aligned to 4 bytes");
if (action_modify_field->dst.level &&
action_modify_field->dst.field != RTE_FLOW_FIELD_TAG)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"inner header fields modification"
" is not supported");
}
if (action_modify_field->src.field != RTE_FLOW_FIELD_VALUE &&
action_modify_field->src.field != RTE_FLOW_FIELD_POINTER) {
if (root)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"modify field action is not"
" supported for group 0");
if ((action_modify_field->src.offset +
action_modify_field->width > src_width) ||
(action_modify_field->src.offset % 32))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"source offset is too big"
" or not aligned to 4 bytes");
if (action_modify_field->src.level &&
action_modify_field->src.field != RTE_FLOW_FIELD_TAG)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"inner header fields modification"
" is not supported");
}
if ((action_modify_field->dst.field ==
action_modify_field->src.field) &&
(action_modify_field->dst.level ==
action_modify_field->src.level))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"source and destination fields"
" cannot be the same");
if (action_modify_field->dst.field == RTE_FLOW_FIELD_VALUE ||
action_modify_field->dst.field == RTE_FLOW_FIELD_POINTER ||
action_modify_field->dst.field == RTE_FLOW_FIELD_MARK)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"mark, immediate value or a pointer to it"
" cannot be used as a destination");
if (action_modify_field->dst.field == RTE_FLOW_FIELD_START ||
action_modify_field->src.field == RTE_FLOW_FIELD_START)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"modifications of an arbitrary"
" place in a packet is not supported");
if (action_modify_field->dst.field == RTE_FLOW_FIELD_VLAN_TYPE ||
action_modify_field->src.field == RTE_FLOW_FIELD_VLAN_TYPE)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"modifications of the 802.1Q Tag"
" Identifier is not supported");
if (action_modify_field->dst.field == RTE_FLOW_FIELD_VXLAN_VNI ||
action_modify_field->src.field == RTE_FLOW_FIELD_VXLAN_VNI)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"modifications of the VXLAN Network"
" Identifier is not supported");
if (action_modify_field->dst.field == RTE_FLOW_FIELD_GENEVE_VNI ||
action_modify_field->src.field == RTE_FLOW_FIELD_GENEVE_VNI)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"modifications of the GENEVE Network"
" Identifier is not supported");
if (action_modify_field->dst.field == RTE_FLOW_FIELD_MARK ||
action_modify_field->src.field == RTE_FLOW_FIELD_MARK)
if (config->dv_xmeta_en == MLX5_XMETA_MODE_LEGACY ||
!mlx5_flow_ext_mreg_supported(dev))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"cannot modify mark in legacy mode"
" or without extensive registers");
if (action_modify_field->dst.field == RTE_FLOW_FIELD_META ||
action_modify_field->src.field == RTE_FLOW_FIELD_META) {
if (config->dv_xmeta_en != MLX5_XMETA_MODE_LEGACY &&
!mlx5_flow_ext_mreg_supported(dev))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"cannot modify meta without"
" extensive registers support");
ret = flow_dv_get_metadata_reg(dev, attr, error);
if (ret < 0 || ret == REG_NON)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"cannot modify meta without"
" extensive registers available");
}
if (action_modify_field->operation != RTE_FLOW_MODIFY_SET)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"add and sub operations"
" are not supported");
if (action_modify_field->dst.field == RTE_FLOW_FIELD_IPV4_ECN ||
action_modify_field->src.field == RTE_FLOW_FIELD_IPV4_ECN ||
action_modify_field->dst.field == RTE_FLOW_FIELD_IPV6_ECN ||
action_modify_field->src.field == RTE_FLOW_FIELD_IPV6_ECN)
if (!hca_attr->modify_outer_ip_ecn && root)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"modifications of the ECN for current firmware is not supported");
return (action_modify_field->width / 32) +
!!(action_modify_field->width % 32);
}
/**
* Validate jump action.
*
* @param[in] action
* Pointer to the jump action.
* @param[in] action_flags
* Holds the actions detected until now.
* @param[in] attributes
* Pointer to flow attributes
* @param[in] external
* Action belongs to flow rule created by request external to PMD.
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_action_jump(struct rte_eth_dev *dev,
const struct mlx5_flow_tunnel *tunnel,
const struct rte_flow_action *action,
uint64_t action_flags,
const struct rte_flow_attr *attributes,
bool external, struct rte_flow_error *error)
{
uint32_t target_group, table = 0;
struct mlx5_priv *priv = dev->data->dev_private;
int ret = 0;
struct flow_grp_info grp_info = {
.external = !!external,
.transfer = !!attributes->transfer,
.fdb_def_rule = !!priv->fdb_def_rule,
.std_tbl_fix = 0
};
if (action_flags & (MLX5_FLOW_FATE_ACTIONS |
MLX5_FLOW_FATE_ESWITCH_ACTIONS))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"can't have 2 fate actions in"
" same flow");
if (!action->conf)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION_CONF,
NULL, "action configuration not set");
target_group =
((const struct rte_flow_action_jump *)action->conf)->group;
ret = mlx5_flow_group_to_table(dev, tunnel, target_group, &table,
&grp_info, error);
if (ret)
return ret;
if (attributes->group == target_group &&
!(action_flags & (MLX5_FLOW_ACTION_TUNNEL_SET |
MLX5_FLOW_ACTION_TUNNEL_MATCH)))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"target group must be other than"
" the current flow group");
if (table == 0)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION_CONF,
NULL, "root table shouldn't be destination");
return 0;
}
/*
* Validate action PORT_ID / REPRESENTED_PORT.
*
* @param[in] dev
* Pointer to rte_eth_dev structure.
* @param[in] action_flags
* Bit-fields that holds the actions detected until now.
* @param[in] action
* PORT_ID / REPRESENTED_PORT action structure.
* @param[in] attr
* Attributes of flow that includes this action.
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_action_port_id(struct rte_eth_dev *dev,
uint64_t action_flags,
const struct rte_flow_action *action,
const struct rte_flow_attr *attr,
struct rte_flow_error *error)
{
const struct rte_flow_action_port_id *port_id;
const struct rte_flow_action_ethdev *ethdev;
struct mlx5_priv *act_priv;
struct mlx5_priv *dev_priv;
uint16_t port;
if (!attr->transfer)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"port action is valid in transfer"
" mode only");
if (!action || !action->conf)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION_CONF,
NULL,
"port action parameters must be"
" specified");
if (action_flags & (MLX5_FLOW_FATE_ACTIONS |
MLX5_FLOW_FATE_ESWITCH_ACTIONS))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"can have only one fate actions in"
" a flow");
dev_priv = mlx5_dev_to_eswitch_info(dev);
if (!dev_priv)
return rte_flow_error_set(error, rte_errno,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"failed to obtain E-Switch info");
switch (action->type) {
case RTE_FLOW_ACTION_TYPE_PORT_ID:
port_id = action->conf;
port = port_id->original ? dev->data->port_id : port_id->id;
break;
case RTE_FLOW_ACTION_TYPE_REPRESENTED_PORT:
ethdev = action->conf;
port = ethdev->port_id;
break;
default:
MLX5_ASSERT(false);
return rte_flow_error_set
(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"unknown E-Switch action");
}
act_priv = mlx5_port_to_eswitch_info(port, false);
if (!act_priv)
return rte_flow_error_set
(error, rte_errno,
RTE_FLOW_ERROR_TYPE_ACTION_CONF, action->conf,
"failed to obtain E-Switch port id for port");
if (act_priv->domain_id != dev_priv->domain_id)
return rte_flow_error_set
(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"port does not belong to"
" E-Switch being configured");
return 0;
}
/**
* Get the maximum number of modify header actions.
*
* @param dev
* Pointer to rte_eth_dev structure.
* @param root
* Whether action is on root table.
*
* @return
* Max number of modify header actions device can support.
*/
static inline unsigned int
flow_dv_modify_hdr_action_max(struct rte_eth_dev *dev __rte_unused,
bool root)
{
/*
* There's no way to directly query the max capacity from FW.
* The maximal value on root table should be assumed to be supported.
*/
if (!root)
return MLX5_MAX_MODIFY_NUM;
else
return MLX5_ROOT_TBL_MODIFY_NUM;
}
/**
* Validate the meter action.
*
* @param[in] dev
* Pointer to rte_eth_dev structure.
* @param[in] action_flags
* Bit-fields that holds the actions detected until now.
* @param[in] item_flags
* Holds the items detected.
* @param[in] action
* Pointer to the meter action.
* @param[in] attr
* Attributes of flow that includes this action.
* @param[in] port_id_item
* Pointer to item indicating port id.
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
mlx5_flow_validate_action_meter(struct rte_eth_dev *dev,
uint64_t action_flags, uint64_t item_flags,
const struct rte_flow_action *action,
const struct rte_flow_attr *attr,
const struct rte_flow_item *port_id_item,
bool *def_policy,
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
const struct rte_flow_action_meter *am = action->conf;
struct mlx5_flow_meter_info *fm;
struct mlx5_flow_meter_policy *mtr_policy;
struct mlx5_flow_mtr_mng *mtrmng = priv->sh->mtrmng;
uint16_t flow_src_port = priv->representor_id;
bool all_ports = false;
if (!am)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"meter action conf is NULL");
if (action_flags & MLX5_FLOW_ACTION_METER)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"meter chaining not support");
if (action_flags & MLX5_FLOW_ACTION_JUMP)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"meter with jump not support");
if (!priv->mtr_en)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"meter action not supported");
fm = mlx5_flow_meter_find(priv, am->mtr_id, NULL);
if (!fm)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"Meter not found");
/* aso meter can always be shared by different domains */
if (fm->ref_cnt && !priv->sh->meter_aso_en &&
!(fm->transfer == attr->transfer ||
(!fm->ingress && !attr->ingress && attr->egress) ||
(!fm->egress && !attr->egress && attr->ingress)))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"Flow attributes domain are either invalid "
"or have a domain conflict with current "
"meter attributes");
if (fm->def_policy) {
if (!((attr->transfer &&
mtrmng->def_policy[MLX5_MTR_DOMAIN_TRANSFER]) ||
(attr->egress &&
mtrmng->def_policy[MLX5_MTR_DOMAIN_EGRESS]) ||
(attr->ingress &&
mtrmng->def_policy[MLX5_MTR_DOMAIN_INGRESS])))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"Flow attributes domain "
"have a conflict with current "
"meter domain attributes");
*def_policy = true;
} else {
mtr_policy = mlx5_flow_meter_policy_find(dev,
fm->policy_id, NULL);
if (!mtr_policy)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"Invalid policy id for meter ");
if (!((attr->transfer && mtr_policy->transfer) ||
(attr->egress && mtr_policy->egress) ||
(attr->ingress && mtr_policy->ingress)))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"Flow attributes domain "
"have a conflict with current "
"meter domain attributes");
if (port_id_item) {
if (mlx5_flow_get_item_vport_id(dev, port_id_item, &flow_src_port,
&all_ports, error))
return -rte_errno;
}
if (attr->transfer) {
if (mtr_policy->dev) {
/**
* When policy has fate action of port_id,
* the flow should have the same src port as policy.
*/
struct mlx5_priv *policy_port_priv =
mtr_policy->dev->data->dev_private;
if (all_ports || flow_src_port != policy_port_priv->representor_id)
return rte_flow_error_set(error,
rte_errno,
RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
NULL,
"Flow and meter policy "
"have different src port.");
}
/* When flow matching all src ports, meter should not have drop count. */
if (all_ports && (fm->drop_cnt || mtr_policy->hierarchy_drop_cnt))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM_SPEC, NULL,
"Meter drop count not supported "
"when matching all ports.");
} else if (mtr_policy->is_rss) {
struct mlx5_flow_meter_policy *fp;
struct mlx5_meter_policy_action_container *acg;
struct mlx5_meter_policy_action_container *acy;
const struct rte_flow_action *rss_act;
int ret;
fp = mlx5_flow_meter_hierarchy_get_final_policy(dev,
mtr_policy);
if (fp == NULL)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"Unable to get the final "
"policy in the hierarchy");
acg = &fp->act_cnt[RTE_COLOR_GREEN];
acy = &fp->act_cnt[RTE_COLOR_YELLOW];
MLX5_ASSERT(acg->fate_action ==
MLX5_FLOW_FATE_SHARED_RSS ||
acy->fate_action ==
MLX5_FLOW_FATE_SHARED_RSS);
if (acg->fate_action == MLX5_FLOW_FATE_SHARED_RSS)
rss_act = acg->rss;
else
rss_act = acy->rss;
ret = mlx5_flow_validate_action_rss(rss_act,
action_flags, dev, attr,
item_flags, error);
if (ret)
return ret;
}
*def_policy = false;
}
return 0;
}
/**
* Validate the age action.
*
* @param[in] action_flags
* Holds the actions detected until now.
* @param[in] action
* Pointer to the age action.
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_action_age(uint64_t action_flags,
const struct rte_flow_action *action,
struct rte_eth_dev *dev,
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
const struct rte_flow_action_age *age = action->conf;
if (!priv->sh->cdev->config.devx ||
(priv->sh->sws_cmng.counter_fallback && !priv->sh->aso_age_mng))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"age action not supported");
if (!(action->conf))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"configuration cannot be null");
if (!(age->timeout))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"invalid timeout value 0");
if (action_flags & MLX5_FLOW_ACTION_AGE)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"duplicate age actions set");
return 0;
}
/**
* Validate the modify-header IPv4 DSCP actions.
*
* @param[in] action_flags
* Holds the actions detected until now.
* @param[in] action
* Pointer to the modify action.
* @param[in] item_flags
* Holds the items detected.
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_action_modify_ipv4_dscp(const uint64_t action_flags,
const struct rte_flow_action *action,
const uint64_t item_flags,
struct rte_flow_error *error)
{
int ret = 0;
ret = flow_dv_validate_action_modify_hdr(action_flags, action, error);
if (!ret) {
if (!(item_flags & MLX5_FLOW_LAYER_L3_IPV4))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"no ipv4 item in pattern");
}
return ret;
}
/**
* Validate the modify-header IPv6 DSCP actions.
*
* @param[in] action_flags
* Holds the actions detected until now.
* @param[in] action
* Pointer to the modify action.
* @param[in] item_flags
* Holds the items detected.
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_action_modify_ipv6_dscp(const uint64_t action_flags,
const struct rte_flow_action *action,
const uint64_t item_flags,
struct rte_flow_error *error)
{
int ret = 0;
ret = flow_dv_validate_action_modify_hdr(action_flags, action, error);
if (!ret) {
if (!(item_flags & MLX5_FLOW_LAYER_L3_IPV6))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"no ipv6 item in pattern");
}
return ret;
}
int
flow_dv_modify_match_cb(void *tool_ctx __rte_unused,
struct mlx5_list_entry *entry, void *cb_ctx)
{
struct mlx5_flow_cb_ctx *ctx = cb_ctx;
struct mlx5_flow_dv_modify_hdr_resource *ref = ctx->data;
struct mlx5_flow_dv_modify_hdr_resource *resource =
container_of(entry, typeof(*resource), entry);
uint32_t key_len = sizeof(*ref) - offsetof(typeof(*ref), ft_type);
key_len += ref->actions_num * sizeof(ref->actions[0]);
return ref->actions_num != resource->actions_num ||
memcmp(&ref->ft_type, &resource->ft_type, key_len);
}
static struct mlx5_indexed_pool *
flow_dv_modify_ipool_get(struct mlx5_dev_ctx_shared *sh, uint8_t index)
{
struct mlx5_indexed_pool *ipool = __atomic_load_n
(&sh->mdh_ipools[index], __ATOMIC_SEQ_CST);
if (!ipool) {
struct mlx5_indexed_pool *expected = NULL;
struct mlx5_indexed_pool_config cfg =
(struct mlx5_indexed_pool_config) {
.size = sizeof(struct mlx5_flow_dv_modify_hdr_resource) +
(index + 1) *
sizeof(struct mlx5_modification_cmd),
.trunk_size = 64,
.grow_trunk = 3,
.grow_shift = 2,
.need_lock = 1,
.release_mem_en = !!sh->config.reclaim_mode,
.per_core_cache =
sh->config.reclaim_mode ? 0 : (1 << 16),
.malloc = mlx5_malloc,
.free = mlx5_free,
.type = "mlx5_modify_action_resource",
};
cfg.size = RTE_ALIGN(cfg.size, sizeof(ipool));
ipool = mlx5_ipool_create(&cfg);
if (!ipool)
return NULL;
if (!__atomic_compare_exchange_n(&sh->mdh_ipools[index],
&expected, ipool, false,
__ATOMIC_SEQ_CST,
__ATOMIC_SEQ_CST)) {
mlx5_ipool_destroy(ipool);
ipool = __atomic_load_n(&sh->mdh_ipools[index],
__ATOMIC_SEQ_CST);
}
}
return ipool;
}
struct mlx5_list_entry *
flow_dv_modify_create_cb(void *tool_ctx, void *cb_ctx)
{
struct mlx5_dev_ctx_shared *sh = tool_ctx;
struct mlx5_flow_cb_ctx *ctx = cb_ctx;
struct mlx5dv_dr_domain *ns;
struct mlx5_flow_dv_modify_hdr_resource *entry;
struct mlx5_flow_dv_modify_hdr_resource *ref = ctx->data;
struct mlx5_indexed_pool *ipool = flow_dv_modify_ipool_get(sh,
ref->actions_num - 1);
int ret;
uint32_t data_len = ref->actions_num * sizeof(ref->actions[0]);
uint32_t key_len = sizeof(*ref) - offsetof(typeof(*ref), ft_type);
uint32_t idx;
if (unlikely(!ipool)) {
rte_flow_error_set(ctx->error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL, "cannot allocate modify ipool");
return NULL;
}
entry = mlx5_ipool_zmalloc(ipool, &idx);
if (!entry) {
rte_flow_error_set(ctx->error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"cannot allocate resource memory");
return NULL;
}
rte_memcpy(&entry->ft_type,
RTE_PTR_ADD(ref, offsetof(typeof(*ref), ft_type)),
key_len + data_len);
if (entry->ft_type == MLX5DV_FLOW_TABLE_TYPE_FDB)
ns = sh->fdb_domain;
else if (entry->ft_type == MLX5DV_FLOW_TABLE_TYPE_NIC_TX)
ns = sh->tx_domain;
else
ns = sh->rx_domain;
ret = mlx5_flow_os_create_flow_action_modify_header
(sh->cdev->ctx, ns, entry,
data_len, &entry->action);
if (ret) {
mlx5_ipool_free(sh->mdh_ipools[ref->actions_num - 1], idx);
rte_flow_error_set(ctx->error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL, "cannot create modification action");
return NULL;
}
entry->idx = idx;
return &entry->entry;
}
struct mlx5_list_entry *
flow_dv_modify_clone_cb(void *tool_ctx, struct mlx5_list_entry *oentry,
void *cb_ctx)
{
struct mlx5_dev_ctx_shared *sh = tool_ctx;
struct mlx5_flow_cb_ctx *ctx = cb_ctx;
struct mlx5_flow_dv_modify_hdr_resource *entry;
struct mlx5_flow_dv_modify_hdr_resource *ref = ctx->data;
uint32_t data_len = ref->actions_num * sizeof(ref->actions[0]);
uint32_t idx;
entry = mlx5_ipool_malloc(sh->mdh_ipools[ref->actions_num - 1],
&idx);
if (!entry) {
rte_flow_error_set(ctx->error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"cannot allocate resource memory");
return NULL;
}
memcpy(entry, oentry, sizeof(*entry) + data_len);
entry->idx = idx;
return &entry->entry;
}
void
flow_dv_modify_clone_free_cb(void *tool_ctx, struct mlx5_list_entry *entry)
{
struct mlx5_dev_ctx_shared *sh = tool_ctx;
struct mlx5_flow_dv_modify_hdr_resource *res =
container_of(entry, typeof(*res), entry);
mlx5_ipool_free(sh->mdh_ipools[res->actions_num - 1], res->idx);
}
/**
* Validate the sample action.
*
* @param[in, out] action_flags
* Holds the actions detected until now.
* @param[in] action
* Pointer to the sample action.
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[in] attr
* Attributes of flow that includes this action.
* @param[in] item_flags
* Holds the items detected.
* @param[in] rss
* Pointer to the RSS action.
* @param[out] sample_rss
* Pointer to the RSS action in sample action list.
* @param[out] count
* Pointer to the COUNT action in sample action list.
* @param[out] fdb_mirror_limit
* Pointer to the FDB mirror limitation flag.
* @param root
* Whether action is on root table.
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_action_sample(uint64_t *action_flags,
const struct rte_flow_action *action,
struct rte_eth_dev *dev,
const struct rte_flow_attr *attr,
uint64_t item_flags,
const struct rte_flow_action_rss *rss,
const struct rte_flow_action_rss **sample_rss,
const struct rte_flow_action_count **count,
int *fdb_mirror_limit,
bool root,
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_sh_config *dev_conf = &priv->sh->config;
const struct rte_flow_action_sample *sample = action->conf;
const struct rte_flow_action *act;
uint64_t sub_action_flags = 0;
uint16_t queue_index = 0xFFFF;
int actions_n = 0;
int ret;
if (!sample)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"configuration cannot be NULL");
if (sample->ratio == 0)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"ratio value starts from 1");
if (!priv->sh->cdev->config.devx ||
(sample->ratio > 0 && !priv->sampler_en))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"sample action not supported");
if (*action_flags & MLX5_FLOW_ACTION_SAMPLE)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"Multiple sample actions not "
"supported");
if (*action_flags & MLX5_FLOW_ACTION_METER)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"wrong action order, meter should "
"be after sample action");
if (*action_flags & MLX5_FLOW_ACTION_JUMP)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"wrong action order, jump should "
"be after sample action");
if (*action_flags & MLX5_FLOW_ACTION_CT)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"Sample after CT not supported");
act = sample->actions;
for (; act->type != RTE_FLOW_ACTION_TYPE_END; act++) {
if (actions_n == MLX5_DV_MAX_NUMBER_OF_ACTIONS)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
act, "too many actions");
switch (act->type) {
case RTE_FLOW_ACTION_TYPE_QUEUE:
ret = mlx5_flow_validate_action_queue(act,
sub_action_flags,
dev,
attr, error);
if (ret < 0)
return ret;
queue_index = ((const struct rte_flow_action_queue *)
(act->conf))->index;
sub_action_flags |= MLX5_FLOW_ACTION_QUEUE;
++actions_n;
break;
case RTE_FLOW_ACTION_TYPE_RSS:
*sample_rss = act->conf;
ret = mlx5_flow_validate_action_rss(act,
sub_action_flags,
dev, attr,
item_flags,
error);
if (ret < 0)
return ret;
if (rss && *sample_rss &&
((*sample_rss)->level != rss->level ||
(*sample_rss)->types != rss->types))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"Can't use the different RSS types "
"or level in the same flow");
if (*sample_rss != NULL && (*sample_rss)->queue_num)
queue_index = (*sample_rss)->queue[0];
sub_action_flags |= MLX5_FLOW_ACTION_RSS;
++actions_n;
break;
case RTE_FLOW_ACTION_TYPE_MARK:
ret = flow_dv_validate_action_mark(dev, act,
sub_action_flags,
attr, error);
if (ret < 0)
return ret;
if (dev_conf->dv_xmeta_en != MLX5_XMETA_MODE_LEGACY)
sub_action_flags |= MLX5_FLOW_ACTION_MARK |
MLX5_FLOW_ACTION_MARK_EXT;
else
sub_action_flags |= MLX5_FLOW_ACTION_MARK;
++actions_n;
break;
case RTE_FLOW_ACTION_TYPE_COUNT:
ret = flow_dv_validate_action_count
(dev, false, *action_flags | sub_action_flags,
root, error);
if (ret < 0)
return ret;
*count = act->conf;
sub_action_flags |= MLX5_FLOW_ACTION_COUNT;
*action_flags |= MLX5_FLOW_ACTION_COUNT;
++actions_n;
break;
case RTE_FLOW_ACTION_TYPE_PORT_ID:
case RTE_FLOW_ACTION_TYPE_REPRESENTED_PORT:
ret = flow_dv_validate_action_port_id(dev,
sub_action_flags,
act,
attr,
error);
if (ret)
return ret;
sub_action_flags |= MLX5_FLOW_ACTION_PORT_ID;
++actions_n;
break;
case RTE_FLOW_ACTION_TYPE_RAW_ENCAP:
ret = flow_dv_validate_action_raw_encap_decap
(dev, NULL, act->conf, attr, &sub_action_flags,
&actions_n, action, item_flags, error);
if (ret < 0)
return ret;
++actions_n;
break;
case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP:
case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP:
ret = flow_dv_validate_action_l2_encap(dev,
sub_action_flags,
act, attr,
error);
if (ret < 0)
return ret;
sub_action_flags |= MLX5_FLOW_ACTION_ENCAP;
++actions_n;
break;
default:
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"Doesn't support optional "
"action");
}
}
if (attr->ingress && !attr->transfer) {
if (!(sub_action_flags & (MLX5_FLOW_ACTION_QUEUE |
MLX5_FLOW_ACTION_RSS)))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"Ingress must has a dest "
"QUEUE for Sample");
} else if (attr->egress && !attr->transfer) {
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"Sample Only support Ingress "
"or E-Switch");
} else if (sample->actions->type != RTE_FLOW_ACTION_TYPE_END) {
MLX5_ASSERT(attr->transfer);
if (sample->ratio > 1)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"E-Switch doesn't support "
"any optional action "
"for sampling");
if (sub_action_flags & MLX5_FLOW_ACTION_QUEUE)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"unsupported action QUEUE");
if (sub_action_flags & MLX5_FLOW_ACTION_RSS)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"unsupported action QUEUE");
if (!(sub_action_flags & MLX5_FLOW_ACTION_PORT_ID))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"E-Switch must has a dest "
"port for mirroring");
if (!priv->sh->cdev->config.hca_attr.reg_c_preserve &&
priv->representor_id != UINT16_MAX)
*fdb_mirror_limit = 1;
}
/* Continue validation for Xcap actions.*/
if ((sub_action_flags & MLX5_FLOW_XCAP_ACTIONS) &&
(queue_index == 0xFFFF || !mlx5_rxq_is_hairpin(dev, queue_index))) {
if ((sub_action_flags & MLX5_FLOW_XCAP_ACTIONS) ==
MLX5_FLOW_XCAP_ACTIONS)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL, "encap and decap "
"combination aren't "
"supported");
if (!attr->transfer && attr->ingress && (sub_action_flags &
MLX5_FLOW_ACTION_ENCAP))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL, "encap is not supported"
" for ingress traffic");
}
return 0;
}
/**
* Find existing modify-header resource or create and register a new one.
*
* @param dev[in, out]
* Pointer to rte_eth_dev structure.
* @param[in, out] resource
* Pointer to modify-header resource.
* @parm[in, out] dev_flow
* Pointer to the dev_flow.
* @param[out] error
* pointer to error structure.
*
* @return
* 0 on success otherwise -errno and errno is set.
*/
static int
flow_dv_modify_hdr_resource_register
(struct rte_eth_dev *dev,
struct mlx5_flow_dv_modify_hdr_resource *resource,
struct mlx5_flow *dev_flow,
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_dev_ctx_shared *sh = priv->sh;
uint32_t key_len = sizeof(*resource) -
offsetof(typeof(*resource), ft_type) +
resource->actions_num * sizeof(resource->actions[0]);
struct mlx5_list_entry *entry;
struct mlx5_flow_cb_ctx ctx = {
.error = error,
.data = resource,
};
struct mlx5_hlist *modify_cmds;
uint64_t key64;
modify_cmds = flow_dv_hlist_prepare(sh, &sh->modify_cmds,
"hdr_modify",
MLX5_FLOW_HDR_MODIFY_HTABLE_SZ,
true, false, sh,
flow_dv_modify_create_cb,
flow_dv_modify_match_cb,
flow_dv_modify_remove_cb,
flow_dv_modify_clone_cb,
flow_dv_modify_clone_free_cb,
error);
if (unlikely(!modify_cmds))
return -rte_errno;
resource->root = !dev_flow->dv.group;
if (resource->actions_num > flow_dv_modify_hdr_action_max(dev,
resource->root))
return rte_flow_error_set(error, EOVERFLOW,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"too many modify header items");
key64 = __rte_raw_cksum(&resource->ft_type, key_len, 0);
entry = mlx5_hlist_register(modify_cmds, key64, &ctx);
if (!entry)
return -rte_errno;
resource = container_of(entry, typeof(*resource), entry);
dev_flow->handle->dvh.modify_hdr = resource;
return 0;
}
/**
* Get DV flow counter by index.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[in] idx
* mlx5 flow counter index in the container.
* @param[out] ppool
* mlx5 flow counter pool in the container.
*
* @return
* Pointer to the counter, NULL otherwise.
*/
static struct mlx5_flow_counter *
flow_dv_counter_get_by_idx(struct rte_eth_dev *dev,
uint32_t idx,
struct mlx5_flow_counter_pool **ppool)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_flow_counter_mng *cmng = &priv->sh->sws_cmng;
struct mlx5_flow_counter_pool *pool;
/* Decrease to original index and clear shared bit. */
idx = (idx - 1) & (MLX5_CNT_SHARED_OFFSET - 1);
MLX5_ASSERT(idx / MLX5_COUNTERS_PER_POOL < cmng->n);
pool = cmng->pools[idx / MLX5_COUNTERS_PER_POOL];
MLX5_ASSERT(pool);
if (ppool)
*ppool = pool;
return MLX5_POOL_GET_CNT(pool, idx % MLX5_COUNTERS_PER_POOL);
}
/**
* Check the devx counter belongs to the pool.
*
* @param[in] pool
* Pointer to the counter pool.
* @param[in] id
* The counter devx ID.
*
* @return
* True if counter belongs to the pool, false otherwise.
*/
static bool
flow_dv_is_counter_in_pool(struct mlx5_flow_counter_pool *pool, int id)
{
int base = (pool->min_dcs->id / MLX5_COUNTERS_PER_POOL) *
MLX5_COUNTERS_PER_POOL;
if (id >= base && id < base + MLX5_COUNTERS_PER_POOL)
return true;
return false;
}
/**
* Get a pool by devx counter ID.
*
* @param[in] cmng
* Pointer to the counter management.
* @param[in] id
* The counter devx ID.
*
* @return
* The counter pool pointer if exists, NULL otherwise,
*/
static struct mlx5_flow_counter_pool *
flow_dv_find_pool_by_id(struct mlx5_flow_counter_mng *cmng, int id)
{
uint32_t i;
struct mlx5_flow_counter_pool *pool = NULL;
rte_spinlock_lock(&cmng->pool_update_sl);
/* Check last used pool. */
if (cmng->last_pool_idx != POOL_IDX_INVALID &&
flow_dv_is_counter_in_pool(cmng->pools[cmng->last_pool_idx], id)) {
pool = cmng->pools[cmng->last_pool_idx];
goto out;
}
/* ID out of range means no suitable pool in the container. */
if (id > cmng->max_id || id < cmng->min_id)
goto out;
/*
* Find the pool from the end of the container, since mostly counter
* ID is sequence increasing, and the last pool should be the needed
* one.
*/
i = cmng->n_valid;
while (i--) {
struct mlx5_flow_counter_pool *pool_tmp = cmng->pools[i];
if (flow_dv_is_counter_in_pool(pool_tmp, id)) {
pool = pool_tmp;
break;
}
}
out:
rte_spinlock_unlock(&cmng->pool_update_sl);
return pool;
}
/**
* Resize a counter container.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
*
* @return
* 0 on success, otherwise negative errno value and rte_errno is set.
*/
static int
flow_dv_container_resize(struct rte_eth_dev *dev)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_flow_counter_mng *cmng = &priv->sh->sws_cmng;
void *old_pools = cmng->pools;
uint32_t resize = cmng->n + MLX5_CNT_CONTAINER_RESIZE;
uint32_t mem_size = sizeof(struct mlx5_flow_counter_pool *) * resize;
void *pools = mlx5_malloc(MLX5_MEM_ZERO, mem_size, 0, SOCKET_ID_ANY);
if (!pools) {
rte_errno = ENOMEM;
return -ENOMEM;
}
if (old_pools)
memcpy(pools, old_pools, cmng->n *
sizeof(struct mlx5_flow_counter_pool *));
cmng->n = resize;
cmng->pools = pools;
if (old_pools)
mlx5_free(old_pools);
return 0;
}
/**
* Query a devx flow counter.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[in] counter
* Index to the flow counter.
* @param[out] pkts
* The statistics value of packets.
* @param[out] bytes
* The statistics value of bytes.
*
* @return
* 0 on success, otherwise a negative errno value and rte_errno is set.
*/
static inline int
_flow_dv_query_count(struct rte_eth_dev *dev, uint32_t counter, uint64_t *pkts,
uint64_t *bytes)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_flow_counter_pool *pool = NULL;
struct mlx5_flow_counter *cnt;
int offset;
cnt = flow_dv_counter_get_by_idx(dev, counter, &pool);
MLX5_ASSERT(pool);
if (priv->sh->sws_cmng.counter_fallback)
return mlx5_devx_cmd_flow_counter_query(cnt->dcs_when_active, 0,
0, pkts, bytes, 0, NULL, NULL, 0);
rte_spinlock_lock(&pool->sl);
if (!pool->raw) {
*pkts = 0;
*bytes = 0;
} else {
offset = MLX5_CNT_ARRAY_IDX(pool, cnt);
*pkts = rte_be_to_cpu_64(pool->raw->data[offset].hits);
*bytes = rte_be_to_cpu_64(pool->raw->data[offset].bytes);
}
rte_spinlock_unlock(&pool->sl);
return 0;
}
/**
* Create and initialize a new counter pool.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[out] dcs
* The devX counter handle.
* @param[in] age
* Whether the pool is for counter that was allocated for aging.
* @param[in/out] cont_cur
* Pointer to the container pointer, it will be update in pool resize.
*
* @return
* The pool container pointer on success, NULL otherwise and rte_errno is set.
*/
static struct mlx5_flow_counter_pool *
flow_dv_pool_create(struct rte_eth_dev *dev, struct mlx5_devx_obj *dcs,
uint32_t age)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_flow_counter_pool *pool;
struct mlx5_flow_counter_mng *cmng = &priv->sh->sws_cmng;
bool fallback = priv->sh->sws_cmng.counter_fallback;
uint32_t size = sizeof(*pool);
size += MLX5_COUNTERS_PER_POOL * MLX5_CNT_SIZE;
size += (!age ? 0 : MLX5_COUNTERS_PER_POOL * MLX5_AGE_SIZE);
pool = mlx5_malloc(MLX5_MEM_ZERO, size, 0, SOCKET_ID_ANY);
if (!pool) {
rte_errno = ENOMEM;
return NULL;
}
pool->raw = NULL;
pool->is_aged = !!age;
pool->query_gen = 0;
pool->min_dcs = dcs;
rte_spinlock_init(&pool->sl);
rte_spinlock_init(&pool->csl);
TAILQ_INIT(&pool->counters[0]);
TAILQ_INIT(&pool->counters[1]);
pool->time_of_last_age_check = MLX5_CURR_TIME_SEC;
rte_spinlock_lock(&cmng->pool_update_sl);
pool->index = cmng->n_valid;
if (pool->index == cmng->n && flow_dv_container_resize(dev)) {
mlx5_free(pool);
rte_spinlock_unlock(&cmng->pool_update_sl);
return NULL;
}
cmng->pools[pool->index] = pool;
cmng->n_valid++;
if (unlikely(fallback)) {
int base = RTE_ALIGN_FLOOR(dcs->id, MLX5_COUNTERS_PER_POOL);
if (base < cmng->min_id)
cmng->min_id = base;
if (base > cmng->max_id)
cmng->max_id = base + MLX5_COUNTERS_PER_POOL - 1;
cmng->last_pool_idx = pool->index;
}
rte_spinlock_unlock(&cmng->pool_update_sl);
return pool;
}
/**
* Prepare a new counter and/or a new counter pool.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[out] cnt_free
* Where to put the pointer of a new counter.
* @param[in] age
* Whether the pool is for counter that was allocated for aging.
*
* @return
* The counter pool pointer and @p cnt_free is set on success,
* NULL otherwise and rte_errno is set.
*/
static struct mlx5_flow_counter_pool *
flow_dv_counter_pool_prepare(struct rte_eth_dev *dev,
struct mlx5_flow_counter **cnt_free,
uint32_t age)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_flow_counter_mng *cmng = &priv->sh->sws_cmng;
struct mlx5_flow_counter_pool *pool;
struct mlx5_counters tmp_tq;
struct mlx5_devx_obj *dcs = NULL;
struct mlx5_flow_counter *cnt;
enum mlx5_counter_type cnt_type =
age ? MLX5_COUNTER_TYPE_AGE : MLX5_COUNTER_TYPE_ORIGIN;
bool fallback = priv->sh->sws_cmng.counter_fallback;
uint32_t i;
if (fallback) {
/* bulk_bitmap must be 0 for single counter allocation. */
dcs = mlx5_devx_cmd_flow_counter_alloc(priv->sh->cdev->ctx, 0);
if (!dcs)
return NULL;
pool = flow_dv_find_pool_by_id(cmng, dcs->id);
if (!pool) {
pool = flow_dv_pool_create(dev, dcs, age);
if (!pool) {
mlx5_devx_cmd_destroy(dcs);
return NULL;
}
}
i = dcs->id % MLX5_COUNTERS_PER_POOL;
cnt = MLX5_POOL_GET_CNT(pool, i);
cnt->pool = pool;
cnt->dcs_when_free = dcs;
*cnt_free = cnt;
return pool;
}
dcs = mlx5_devx_cmd_flow_counter_alloc(priv->sh->cdev->ctx, 0x4);
if (!dcs) {
rte_errno = ENODATA;
return NULL;
}
pool = flow_dv_pool_create(dev, dcs, age);
if (!pool) {
mlx5_devx_cmd_destroy(dcs);
return NULL;
}
TAILQ_INIT(&tmp_tq);
for (i = 1; i < MLX5_COUNTERS_PER_POOL; ++i) {
cnt = MLX5_POOL_GET_CNT(pool, i);
cnt->pool = pool;
TAILQ_INSERT_HEAD(&tmp_tq, cnt, next);
}
rte_spinlock_lock(&cmng->csl[cnt_type]);
TAILQ_CONCAT(&cmng->counters[cnt_type], &tmp_tq, next);
rte_spinlock_unlock(&cmng->csl[cnt_type]);
*cnt_free = MLX5_POOL_GET_CNT(pool, 0);
(*cnt_free)->pool = pool;
return pool;
}
/**
* Allocate a flow counter.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[in] age
* Whether the counter was allocated for aging.
*
* @return
* Index to flow counter on success, 0 otherwise and rte_errno is set.
*/
static uint32_t
flow_dv_counter_alloc(struct rte_eth_dev *dev, uint32_t age)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_flow_counter_pool *pool = NULL;
struct mlx5_flow_counter *cnt_free = NULL;
bool fallback = priv->sh->sws_cmng.counter_fallback;
struct mlx5_flow_counter_mng *cmng = &priv->sh->sws_cmng;
enum mlx5_counter_type cnt_type =
age ? MLX5_COUNTER_TYPE_AGE : MLX5_COUNTER_TYPE_ORIGIN;
uint32_t cnt_idx;
if (!priv->sh->cdev->config.devx) {
rte_errno = ENOTSUP;
return 0;
}
/* Get free counters from container. */
rte_spinlock_lock(&cmng->csl[cnt_type]);
cnt_free = TAILQ_FIRST(&cmng->counters[cnt_type]);
if (cnt_free)
TAILQ_REMOVE(&cmng->counters[cnt_type], cnt_free, next);
rte_spinlock_unlock(&cmng->csl[cnt_type]);
if (!cnt_free && !flow_dv_counter_pool_prepare(dev, &cnt_free, age))
goto err;
pool = cnt_free->pool;
if (fallback)
cnt_free->dcs_when_active = cnt_free->dcs_when_free;
/* Create a DV counter action only in the first time usage. */
if (!cnt_free->action) {
uint16_t offset;
struct mlx5_devx_obj *dcs;
int ret;
if (!fallback) {
offset = MLX5_CNT_ARRAY_IDX(pool, cnt_free);
dcs = pool->min_dcs;
} else {
offset = 0;
dcs = cnt_free->dcs_when_free;
}
ret = mlx5_flow_os_create_flow_action_count(dcs->obj, offset,
&cnt_free->action);
if (ret) {
rte_errno = errno;
goto err;
}
}
cnt_idx = MLX5_MAKE_CNT_IDX(pool->index,
MLX5_CNT_ARRAY_IDX(pool, cnt_free));
/* Update the counter reset values. */
if (_flow_dv_query_count(dev, cnt_idx, &cnt_free->hits,
&cnt_free->bytes))
goto err;
if (!fallback && !priv->sh->sws_cmng.query_thread_on)
/* Start the asynchronous batch query by the host thread. */
mlx5_set_query_alarm(priv->sh);
/*
* When the count action isn't shared (by ID), shared_info field is
* used for indirect action API's refcnt.
* When the counter action is not shared neither by ID nor by indirect
* action API, shared info must be 1.
*/
cnt_free->shared_info.refcnt = 1;
return cnt_idx;
err:
if (cnt_free) {
cnt_free->pool = pool;
if (fallback)
cnt_free->dcs_when_free = cnt_free->dcs_when_active;
rte_spinlock_lock(&cmng->csl[cnt_type]);
TAILQ_INSERT_TAIL(&cmng->counters[cnt_type], cnt_free, next);
rte_spinlock_unlock(&cmng->csl[cnt_type]);
}
return 0;
}
/**
* Get age param from counter index.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[in] counter
* Index to the counter handler.
*
* @return
* The aging parameter specified for the counter index.
*/
static struct mlx5_age_param*
flow_dv_counter_idx_get_age(struct rte_eth_dev *dev,
uint32_t counter)
{
struct mlx5_flow_counter *cnt;
struct mlx5_flow_counter_pool *pool = NULL;
flow_dv_counter_get_by_idx(dev, counter, &pool);
counter = (counter - 1) % MLX5_COUNTERS_PER_POOL;
cnt = MLX5_POOL_GET_CNT(pool, counter);
return MLX5_CNT_TO_AGE(cnt);
}
/**
* Remove a flow counter from aged counter list.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[in] counter
* Index to the counter handler.
* @param[in] cnt
* Pointer to the counter handler.
*/
static void
flow_dv_counter_remove_from_age(struct rte_eth_dev *dev,
uint32_t counter, struct mlx5_flow_counter *cnt)
{
struct mlx5_age_info *age_info;
struct mlx5_age_param *age_param;
struct mlx5_priv *priv = dev->data->dev_private;
uint16_t expected = AGE_CANDIDATE;
age_info = GET_PORT_AGE_INFO(priv);
age_param = flow_dv_counter_idx_get_age(dev, counter);
if (!__atomic_compare_exchange_n(&age_param->state, &expected,
AGE_FREE, false, __ATOMIC_RELAXED,
__ATOMIC_RELAXED)) {
/**
* We need the lock even it is age timeout,
* since counter may still in process.
*/
rte_spinlock_lock(&age_info->aged_sl);
TAILQ_REMOVE(&age_info->aged_counters, cnt, next);
rte_spinlock_unlock(&age_info->aged_sl);
__atomic_store_n(&age_param->state, AGE_FREE, __ATOMIC_RELAXED);
}
}
/**
* Release a flow counter.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[in] counter
* Index to the counter handler.
*/
static void
flow_dv_counter_free(struct rte_eth_dev *dev, uint32_t counter)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_flow_counter_pool *pool = NULL;
struct mlx5_flow_counter *cnt;
enum mlx5_counter_type cnt_type;
if (!counter)
return;
cnt = flow_dv_counter_get_by_idx(dev, counter, &pool);
MLX5_ASSERT(pool);
if (pool->is_aged) {
flow_dv_counter_remove_from_age(dev, counter, cnt);
} else {
/*
* If the counter action is shared by indirect action API,
* the atomic function reduces its references counter.
* If after the reduction the action is still referenced, the
* function returns here and does not release it.
* When the counter action is not shared by
* indirect action API, shared info is 1 before the reduction,
* so this condition is failed and function doesn't return here.
*/
if (__atomic_sub_fetch(&cnt->shared_info.refcnt, 1,
__ATOMIC_RELAXED))
return;
}
cnt->pool = pool;
/*
* Put the counter back to list to be updated in none fallback mode.
* Currently, we are using two list alternately, while one is in query,
* add the freed counter to the other list based on the pool query_gen
* value. After query finishes, add counter the list to the global
* container counter list. The list changes while query starts. In
* this case, lock will not be needed as query callback and release
* function both operate with the different list.
*/
if (!priv->sh->sws_cmng.counter_fallback) {
rte_spinlock_lock(&pool->csl);
TAILQ_INSERT_TAIL(&pool->counters[pool->query_gen], cnt, next);
rte_spinlock_unlock(&pool->csl);
} else {
cnt->dcs_when_free = cnt->dcs_when_active;
cnt_type = pool->is_aged ? MLX5_COUNTER_TYPE_AGE :
MLX5_COUNTER_TYPE_ORIGIN;
rte_spinlock_lock(&priv->sh->sws_cmng.csl[cnt_type]);
TAILQ_INSERT_TAIL(&priv->sh->sws_cmng.counters[cnt_type],
cnt, next);
rte_spinlock_unlock(&priv->sh->sws_cmng.csl[cnt_type]);
}
}
/**
* Resize a meter id container.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
*
* @return
* 0 on success, otherwise negative errno value and rte_errno is set.
*/
static int
flow_dv_mtr_container_resize(struct rte_eth_dev *dev)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_aso_mtr_pools_mng *pools_mng =
&priv->sh->mtrmng->pools_mng;
void *old_pools = pools_mng->pools;
uint32_t resize = pools_mng->n + MLX5_MTRS_CONTAINER_RESIZE;
uint32_t mem_size = sizeof(struct mlx5_aso_mtr_pool *) * resize;
void *pools = mlx5_malloc(MLX5_MEM_ZERO, mem_size, 0, SOCKET_ID_ANY);
if (!pools) {
rte_errno = ENOMEM;
return -ENOMEM;
}
if (!pools_mng->n)
if (mlx5_aso_queue_init(priv->sh, ASO_OPC_MOD_POLICER, 1)) {
mlx5_free(pools);
return -ENOMEM;
}
if (old_pools)
memcpy(pools, old_pools, pools_mng->n *
sizeof(struct mlx5_aso_mtr_pool *));
pools_mng->n = resize;
pools_mng->pools = pools;
if (old_pools)
mlx5_free(old_pools);
return 0;
}
/**
* Prepare a new meter and/or a new meter pool.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[out] mtr_free
* Where to put the pointer of a new meter.g.
*
* @return
* The meter pool pointer and @mtr_free is set on success,
* NULL otherwise and rte_errno is set.
*/
static struct mlx5_aso_mtr_pool *
flow_dv_mtr_pool_create(struct rte_eth_dev *dev, struct mlx5_aso_mtr **mtr_free)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_aso_mtr_pools_mng *pools_mng = &priv->sh->mtrmng->pools_mng;
struct mlx5_aso_mtr_pool *pool = NULL;
struct mlx5_devx_obj *dcs = NULL;
uint32_t i;
uint32_t log_obj_size;
log_obj_size = rte_log2_u32(MLX5_ASO_MTRS_PER_POOL >> 1);
dcs = mlx5_devx_cmd_create_flow_meter_aso_obj(priv->sh->cdev->ctx,
priv->sh->cdev->pdn,
log_obj_size);
if (!dcs) {
rte_errno = ENODATA;
return NULL;
}
pool = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*pool), 0, SOCKET_ID_ANY);
if (!pool) {
rte_errno = ENOMEM;
claim_zero(mlx5_devx_cmd_destroy(dcs));
return NULL;
}
pool->devx_obj = dcs;
rte_rwlock_write_lock(&pools_mng->resize_mtrwl);
pool->index = pools_mng->n_valid;
if (pool->index == pools_mng->n && flow_dv_mtr_container_resize(dev)) {
mlx5_free(pool);
claim_zero(mlx5_devx_cmd_destroy(dcs));
rte_rwlock_write_unlock(&pools_mng->resize_mtrwl);
return NULL;
}
pools_mng->pools[pool->index] = pool;
pools_mng->n_valid++;
rte_rwlock_write_unlock(&pools_mng->resize_mtrwl);
for (i = 1; i < MLX5_ASO_MTRS_PER_POOL; ++i) {
pool->mtrs[i].offset = i;
LIST_INSERT_HEAD(&pools_mng->meters, &pool->mtrs[i], next);
}
pool->mtrs[0].offset = 0;
*mtr_free = &pool->mtrs[0];
return pool;
}
/**
* Release a flow meter into pool.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[in] mtr_idx
* Index to aso flow meter.
*/
static void
flow_dv_aso_mtr_release_to_pool(struct rte_eth_dev *dev, uint32_t mtr_idx)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_aso_mtr_pools_mng *pools_mng =
&priv->sh->mtrmng->pools_mng;
struct mlx5_aso_mtr *aso_mtr = mlx5_aso_meter_by_idx(priv, mtr_idx);
MLX5_ASSERT(aso_mtr);
rte_spinlock_lock(&pools_mng->mtrsl);
memset(&aso_mtr->fm, 0, sizeof(struct mlx5_flow_meter_info));
aso_mtr->state = ASO_METER_FREE;
LIST_INSERT_HEAD(&pools_mng->meters, aso_mtr, next);
rte_spinlock_unlock(&pools_mng->mtrsl);
}
/**
* Allocate a aso flow meter.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
*
* @return
* Index to aso flow meter on success, 0 otherwise and rte_errno is set.
*/
static uint32_t
flow_dv_mtr_alloc(struct rte_eth_dev *dev)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_aso_mtr *mtr_free = NULL;
struct mlx5_aso_mtr_pools_mng *pools_mng =
&priv->sh->mtrmng->pools_mng;
struct mlx5_aso_mtr_pool *pool;
uint32_t mtr_idx = 0;
if (!priv->sh->cdev->config.devx) {
rte_errno = ENOTSUP;
return 0;
}
/* Allocate the flow meter memory. */
/* Get free meters from management. */
rte_spinlock_lock(&pools_mng->mtrsl);
mtr_free = LIST_FIRST(&pools_mng->meters);
if (mtr_free)
LIST_REMOVE(mtr_free, next);
if (!mtr_free && !flow_dv_mtr_pool_create(dev, &mtr_free)) {
rte_spinlock_unlock(&pools_mng->mtrsl);
return 0;
}
mtr_free->state = ASO_METER_WAIT;
rte_spinlock_unlock(&pools_mng->mtrsl);
pool = container_of(mtr_free,
struct mlx5_aso_mtr_pool,
mtrs[mtr_free->offset]);
mtr_idx = MLX5_MAKE_MTR_IDX(pool->index, mtr_free->offset);
if (!mtr_free->fm.meter_action_g) {
#ifdef HAVE_MLX5_DR_CREATE_ACTION_ASO
struct rte_flow_error error;
uint8_t reg_id;
reg_id = mlx5_flow_get_reg_id(dev, MLX5_MTR_COLOR, 0, &error);
mtr_free->fm.meter_action_g =
mlx5_glue->dv_create_flow_action_aso
(priv->sh->rx_domain,
pool->devx_obj->obj,
mtr_free->offset,
(1 << MLX5_FLOW_COLOR_GREEN),
reg_id - REG_C_0);
#endif /* HAVE_MLX5_DR_CREATE_ACTION_ASO */
if (!mtr_free->fm.meter_action_g) {
flow_dv_aso_mtr_release_to_pool(dev, mtr_idx);
return 0;
}
}
return mtr_idx;
}
/**
* Verify the @p attributes will be correctly understood by the NIC and store
* them in the @p flow if everything is correct.
*
* @param[in] dev
* Pointer to dev struct.
* @param[in] attributes
* Pointer to flow attributes
* @param[in] external
* This flow rule is created by request external to PMD.
* @param[out] error
* Pointer to error structure.
*
* @return
* - 0 on success and non root table.
* - 1 on success and root table.
* - a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate_attributes(struct rte_eth_dev *dev,
const struct mlx5_flow_tunnel *tunnel,
const struct rte_flow_attr *attributes,
const struct flow_grp_info *grp_info,
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
uint32_t lowest_priority = mlx5_get_lowest_priority(dev, attributes);
int ret = 0;
#ifndef HAVE_MLX5DV_DR
RTE_SET_USED(tunnel);
RTE_SET_USED(grp_info);
if (attributes->group)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ATTR_GROUP,
NULL,
"groups are not supported");
#else
uint32_t table = 0;
ret = mlx5_flow_group_to_table(dev, tunnel, attributes->group, &table,
grp_info, error);
if (ret)
return ret;
if (!table)
ret = MLX5DV_DR_ACTION_FLAGS_ROOT_LEVEL;
#endif
if (attributes->priority != MLX5_FLOW_LOWEST_PRIO_INDICATOR &&
attributes->priority > lowest_priority)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY,
NULL,
"priority out of range");
if (attributes->transfer) {
if (!priv->sh->config.dv_esw_en)
return rte_flow_error_set
(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"E-Switch dr is not supported");
if (attributes->egress)
return rte_flow_error_set
(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, attributes,
"egress is not supported");
}
if (!(attributes->egress ^ attributes->ingress))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ATTR, NULL,
"must specify exactly one of "
"ingress or egress");
return ret;
}
static int
validate_integrity_bits(const struct rte_flow_item_integrity *mask,
int64_t pattern_flags, uint64_t l3_flags,
uint64_t l4_flags, uint64_t ip4_flag,
struct rte_flow_error *error)
{
if (mask->l3_ok && !(pattern_flags & l3_flags))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM,
NULL, "missing L3 protocol");
if (mask->ipv4_csum_ok && !(pattern_flags & ip4_flag))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM,
NULL, "missing IPv4 protocol");
if ((mask->l4_ok || mask->l4_csum_ok) && !(pattern_flags & l4_flags))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM,
NULL, "missing L4 protocol");
return 0;
}
static int
flow_dv_validate_item_integrity_post(const struct
rte_flow_item *integrity_items[2],
int64_t pattern_flags,
struct rte_flow_error *error)
{
const struct rte_flow_item_integrity *mask;
int ret;
if (pattern_flags & MLX5_FLOW_ITEM_OUTER_INTEGRITY) {
mask = (typeof(mask))integrity_items[0]->mask;
ret = validate_integrity_bits(mask, pattern_flags,
MLX5_FLOW_LAYER_OUTER_L3,
MLX5_FLOW_LAYER_OUTER_L4,
MLX5_FLOW_LAYER_OUTER_L3_IPV4,
error);
if (ret)
return ret;
}
if (pattern_flags & MLX5_FLOW_ITEM_INNER_INTEGRITY) {
mask = (typeof(mask))integrity_items[1]->mask;
ret = validate_integrity_bits(mask, pattern_flags,
MLX5_FLOW_LAYER_INNER_L3,
MLX5_FLOW_LAYER_INNER_L4,
MLX5_FLOW_LAYER_INNER_L3_IPV4,
error);
if (ret)
return ret;
}
return 0;
}
static int
flow_dv_validate_item_integrity(struct rte_eth_dev *dev,
const struct rte_flow_item *integrity_item,
uint64_t pattern_flags, uint64_t *last_item,
const struct rte_flow_item *integrity_items[2],
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
const struct rte_flow_item_integrity *mask = (typeof(mask))
integrity_item->mask;
const struct rte_flow_item_integrity *spec = (typeof(spec))
integrity_item->spec;
if (!priv->sh->cdev->config.hca_attr.pkt_integrity_match)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM,
integrity_item,
"packet integrity integrity_item not supported");
if (!spec)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM,
integrity_item,
"no spec for integrity item");
if (!mask)
mask = &rte_flow_item_integrity_mask;
if (!mlx5_validate_integrity_item(mask))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM,
integrity_item,
"unsupported integrity filter");
if ((mask->l3_ok & !spec->l3_ok) || (mask->l4_ok & !spec->l4_ok) ||
(mask->ipv4_csum_ok & !spec->ipv4_csum_ok) ||
(mask->l4_csum_ok & !spec->l4_csum_ok))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM,
NULL, "negative integrity flow is not supported");
if (spec->level > 1) {
if (pattern_flags & MLX5_FLOW_ITEM_INNER_INTEGRITY)
return rte_flow_error_set
(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM,
NULL, "multiple inner integrity items not supported");
integrity_items[1] = integrity_item;
*last_item |= MLX5_FLOW_ITEM_INNER_INTEGRITY;
} else {
if (pattern_flags & MLX5_FLOW_ITEM_OUTER_INTEGRITY)
return rte_flow_error_set
(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM,
NULL, "multiple outer integrity items not supported");
integrity_items[0] = integrity_item;
*last_item |= MLX5_FLOW_ITEM_OUTER_INTEGRITY;
}
return 0;
}
static int
flow_dv_validate_item_flex(struct rte_eth_dev *dev,
const struct rte_flow_item *item,
uint64_t item_flags,
uint64_t *last_item,
bool is_inner,
struct rte_flow_error *error)
{
const struct rte_flow_item_flex *flow_spec = item->spec;
const struct rte_flow_item_flex *flow_mask = item->mask;
struct mlx5_flex_item *flex;
if (!flow_spec)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM, NULL,
"flex flow item spec cannot be NULL");
if (!flow_mask)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM, NULL,
"flex flow item mask cannot be NULL");
if (item->last)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM, NULL,
"flex flow item last not supported");
if (mlx5_flex_acquire_index(dev, flow_spec->handle, false) < 0)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM, NULL,
"invalid flex flow item handle");
flex = (struct mlx5_flex_item *)flow_spec->handle;
switch (flex->tunnel_mode) {
case FLEX_TUNNEL_MODE_SINGLE:
if (item_flags &
(MLX5_FLOW_ITEM_OUTER_FLEX | MLX5_FLOW_ITEM_INNER_FLEX))
rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM,
NULL, "multiple flex items not supported");
break;
case FLEX_TUNNEL_MODE_OUTER:
if (is_inner)
rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM,
NULL, "inner flex item was not configured");
if (item_flags & MLX5_FLOW_ITEM_OUTER_FLEX)
rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM,
NULL, "multiple flex items not supported");
break;
case FLEX_TUNNEL_MODE_INNER:
if (!is_inner)
rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM,
NULL, "outer flex item was not configured");
if (item_flags & MLX5_FLOW_ITEM_INNER_FLEX)
rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM,
NULL, "multiple flex items not supported");
break;
case FLEX_TUNNEL_MODE_MULTI:
if ((is_inner && (item_flags & MLX5_FLOW_ITEM_INNER_FLEX)) ||
(!is_inner && (item_flags & MLX5_FLOW_ITEM_OUTER_FLEX))) {
rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM,
NULL, "multiple flex items not supported");
}
break;
case FLEX_TUNNEL_MODE_TUNNEL:
if (is_inner || (item_flags & MLX5_FLOW_ITEM_FLEX_TUNNEL))
rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM,
NULL, "multiple flex tunnel items not supported");
break;
default:
rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM,
NULL, "invalid flex item configuration");
}
*last_item = flex->tunnel_mode == FLEX_TUNNEL_MODE_TUNNEL ?
MLX5_FLOW_ITEM_FLEX_TUNNEL : is_inner ?
MLX5_FLOW_ITEM_INNER_FLEX : MLX5_FLOW_ITEM_OUTER_FLEX;
return 0;
}
/**
* Internal validation function. For validating both actions and items.
*
* @param[in] dev
* Pointer to the rte_eth_dev structure.
* @param[in] attr
* Pointer to the flow attributes.
* @param[in] items
* Pointer to the list of items.
* @param[in] actions
* Pointer to the list of actions.
* @param[in] external
* This flow rule is created by request external to PMD.
* @param[in] hairpin
* Number of hairpin TX actions, 0 means classic flow.
* @param[out] error
* Pointer to the error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_validate(struct rte_eth_dev *dev, const struct rte_flow_attr *attr,
const struct rte_flow_item items[],
const struct rte_flow_action actions[],
bool external, int hairpin, struct rte_flow_error *error)
{
int ret;
uint64_t aso_mask, action_flags = 0;
uint64_t item_flags = 0;
uint64_t last_item = 0;
uint8_t next_protocol = 0xff;
uint16_t ether_type = 0;
int actions_n = 0;
uint8_t item_ipv6_proto = 0;
int fdb_mirror_limit = 0;
int modify_after_mirror = 0;
const struct rte_flow_item *geneve_item = NULL;
const struct rte_flow_item *gre_item = NULL;
const struct rte_flow_item *gtp_item = NULL;
const struct rte_flow_action_raw_decap *decap;
const struct rte_flow_action_raw_encap *encap;
const struct rte_flow_action_rss *rss = NULL;
const struct rte_flow_action_rss *sample_rss = NULL;
const struct rte_flow_action_count *sample_count = NULL;
const struct rte_flow_item_tcp nic_tcp_mask = {
.hdr = {
.tcp_flags = 0xFF,
.src_port = RTE_BE16(UINT16_MAX),
.dst_port = RTE_BE16(UINT16_MAX),
}
};
const struct rte_flow_item_ipv6 nic_ipv6_mask = {
.hdr = {
.src_addr =
"\xff\xff\xff\xff\xff\xff\xff\xff"
"\xff\xff\xff\xff\xff\xff\xff\xff",
.dst_addr =
"\xff\xff\xff\xff\xff\xff\xff\xff"
"\xff\xff\xff\xff\xff\xff\xff\xff",
.vtc_flow = RTE_BE32(0xffffffff),
.proto = 0xff,
.hop_limits = 0xff,
},
.has_frag_ext = 1,
};
const struct rte_flow_item_ecpri nic_ecpri_mask = {
.hdr = {
.common = {
.u32 =
RTE_BE32(((const struct rte_ecpri_common_hdr) {
.type = 0xFF,
}).u32),
},
.dummy[0] = 0xffffffff,
},
};
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_sh_config *dev_conf = &priv->sh->config;
uint16_t queue_index = 0xFFFF;
const struct rte_flow_item_vlan *vlan_m = NULL;
uint32_t rw_act_num = 0;
uint64_t is_root;
const struct mlx5_flow_tunnel *tunnel;
enum mlx5_tof_rule_type tof_rule_type;
struct flow_grp_info grp_info = {
.external = !!external,
.transfer = !!attr->transfer,
.fdb_def_rule = !!priv->fdb_def_rule,
.std_tbl_fix = true,
};
const struct rte_eth_hairpin_conf *conf;
const struct rte_flow_item *integrity_items[2] = {NULL, NULL};
const struct rte_flow_item *port_id_item = NULL;
bool def_policy = false;
bool shared_count = false;
uint16_t udp_dport = 0;
uint32_t tag_id = 0;
const struct rte_flow_action_age *non_shared_age = NULL;
const struct rte_flow_action_count *count = NULL;
if (items == NULL)
return -1;
tunnel = is_tunnel_offload_active(dev) ?
mlx5_get_tof(items, actions, &tof_rule_type) : NULL;
if (tunnel) {
if (!dev_conf->dv_flow_en)
return rte_flow_error_set
(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL, "tunnel offload requires DV flow interface");
if (priv->representor)
return rte_flow_error_set
(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL, "decap not supported for VF representor");
if (tof_rule_type == MLX5_TUNNEL_OFFLOAD_SET_RULE)
action_flags |= MLX5_FLOW_ACTION_TUNNEL_SET;
else if (tof_rule_type == MLX5_TUNNEL_OFFLOAD_MATCH_RULE)
action_flags |= MLX5_FLOW_ACTION_TUNNEL_MATCH |
MLX5_FLOW_ACTION_DECAP;
grp_info.std_tbl_fix = tunnel_use_standard_attr_group_translate
(dev, attr, tunnel, tof_rule_type);
}
ret = flow_dv_validate_attributes(dev, tunnel, attr, &grp_info, error);
if (ret < 0)
return ret;
is_root = (uint64_t)ret;
for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
int type = items->type;
if (!mlx5_flow_os_item_supported(type))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM,
NULL, "item not supported");
switch (type) {
case RTE_FLOW_ITEM_TYPE_VOID:
break;
case RTE_FLOW_ITEM_TYPE_ESP:
ret = mlx5_flow_os_validate_item_esp(items, item_flags,
next_protocol,
error);
if (ret < 0)
return ret;
last_item = MLX5_FLOW_ITEM_ESP;
break;
case RTE_FLOW_ITEM_TYPE_PORT_ID:
ret = flow_dv_validate_item_port_id
(dev, items, attr, item_flags, error);
if (ret < 0)
return ret;
last_item = MLX5_FLOW_ITEM_PORT_ID;
port_id_item = items;
break;
case RTE_FLOW_ITEM_TYPE_REPRESENTED_PORT:
case RTE_FLOW_ITEM_TYPE_PORT_REPRESENTOR:
ret = flow_dv_validate_item_represented_port
(dev, items, attr, item_flags, error);
if (ret < 0)
return ret;
last_item = MLX5_FLOW_ITEM_REPRESENTED_PORT;
port_id_item = items;
break;
case RTE_FLOW_ITEM_TYPE_ETH:
ret = mlx5_flow_validate_item_eth(items, item_flags,
true, error);
if (ret < 0)
return ret;
last_item = tunnel ? MLX5_FLOW_LAYER_INNER_L2 :
MLX5_FLOW_LAYER_OUTER_L2;
if (items->mask != NULL && items->spec != NULL) {
ether_type =
((const struct rte_flow_item_eth *)
items->spec)->type;
ether_type &=
((const struct rte_flow_item_eth *)
items->mask)->type;
ether_type = rte_be_to_cpu_16(ether_type);
} else {
ether_type = 0;
}
break;
case RTE_FLOW_ITEM_TYPE_VLAN:
ret = flow_dv_validate_item_vlan(items, item_flags,
dev, error);
if (ret < 0)
return ret;
last_item = tunnel ? MLX5_FLOW_LAYER_INNER_VLAN :
MLX5_FLOW_LAYER_OUTER_VLAN;
if (items->mask != NULL && items->spec != NULL) {
ether_type =
((const struct rte_flow_item_vlan *)
items->spec)->inner_type;
ether_type &=
((const struct rte_flow_item_vlan *)
items->mask)->inner_type;
ether_type = rte_be_to_cpu_16(ether_type);
} else {
ether_type = 0;
}
/* Store outer VLAN mask for of_push_vlan action. */
if (!tunnel)
vlan_m = items->mask;
break;
case RTE_FLOW_ITEM_TYPE_IPV4:
mlx5_flow_tunnel_ip_check(items, next_protocol,
&item_flags, &tunnel);
ret = flow_dv_validate_item_ipv4(dev, items, item_flags,
last_item, ether_type,
error);
if (ret < 0)
return ret;
last_item = tunnel ? MLX5_FLOW_LAYER_INNER_L3_IPV4 :
MLX5_FLOW_LAYER_OUTER_L3_IPV4;
if (items->mask != NULL &&
((const struct rte_flow_item_ipv4 *)
items->mask)->hdr.next_proto_id) {
next_protocol =
((const struct rte_flow_item_ipv4 *)
(items->spec))->hdr.next_proto_id;
next_protocol &=
((const struct rte_flow_item_ipv4 *)
(items->mask))->hdr.next_proto_id;
} else {
/* Reset for inner layer. */
next_protocol = 0xff;
}
break;
case RTE_FLOW_ITEM_TYPE_IPV6:
mlx5_flow_tunnel_ip_check(items, next_protocol,
&item_flags, &tunnel);
ret = mlx5_flow_validate_item_ipv6(items, item_flags,
last_item,
ether_type,
&nic_ipv6_mask,
error);
if (ret < 0)
return ret;
last_item = tunnel ? MLX5_FLOW_LAYER_INNER_L3_IPV6 :
MLX5_FLOW_LAYER_OUTER_L3_IPV6;
if (items->mask != NULL &&
((const struct rte_flow_item_ipv6 *)
items->mask)->hdr.proto) {
item_ipv6_proto =
((const struct rte_flow_item_ipv6 *)
items->spec)->hdr.proto;
next_protocol =
((const struct rte_flow_item_ipv6 *)
items->spec)->hdr.proto;
next_protocol &=
((const struct rte_flow_item_ipv6 *)
items->mask)->hdr.proto;
} else {
/* Reset for inner layer. */
next_protocol = 0xff;
}
break;
case RTE_FLOW_ITEM_TYPE_IPV6_FRAG_EXT:
ret = flow_dv_validate_item_ipv6_frag_ext(items,
item_flags,
error);
if (ret < 0)
return ret;
last_item = tunnel ?
MLX5_FLOW_LAYER_INNER_L3_IPV6_FRAG_EXT :
MLX5_FLOW_LAYER_OUTER_L3_IPV6_FRAG_EXT;
if (items->mask != NULL &&
((const struct rte_flow_item_ipv6_frag_ext *)
items->mask)->hdr.next_header) {
next_protocol =
((const struct rte_flow_item_ipv6_frag_ext *)
items->spec)->hdr.next_header;
next_protocol &=
((const struct rte_flow_item_ipv6_frag_ext *)
items->mask)->hdr.next_header;
} else {
/* Reset for inner layer. */
next_protocol = 0xff;
}
break;
case RTE_FLOW_ITEM_TYPE_TCP:
ret = mlx5_flow_validate_item_tcp
(items, item_flags,
next_protocol,
&nic_tcp_mask,
error);
if (ret < 0)
return ret;
last_item = tunnel ? MLX5_FLOW_LAYER_INNER_L4_TCP :
MLX5_FLOW_LAYER_OUTER_L4_TCP;
break;
case RTE_FLOW_ITEM_TYPE_UDP:
ret = mlx5_flow_validate_item_udp(items, item_flags,
next_protocol,
error);
const struct rte_flow_item_udp *spec = items->spec;
const struct rte_flow_item_udp *mask = items->mask;
if (!mask)
mask = &rte_flow_item_udp_mask;
if (spec != NULL)
udp_dport = rte_be_to_cpu_16
(spec->hdr.dst_port &
mask->hdr.dst_port);
if (ret < 0)
return ret;
last_item = tunnel ? MLX5_FLOW_LAYER_INNER_L4_UDP :
MLX5_FLOW_LAYER_OUTER_L4_UDP;
break;
case RTE_FLOW_ITEM_TYPE_GRE:
ret = mlx5_flow_validate_item_gre(items, item_flags,
next_protocol, error);
if (ret < 0)
return ret;
gre_item = items;
last_item = MLX5_FLOW_LAYER_GRE;
break;
case RTE_FLOW_ITEM_TYPE_GRE_OPTION:
ret = mlx5_flow_validate_item_gre_option(dev, items, item_flags,
attr, gre_item, error);
if (ret < 0)
return ret;
last_item = MLX5_FLOW_LAYER_GRE;
break;
case RTE_FLOW_ITEM_TYPE_NVGRE:
ret = mlx5_flow_validate_item_nvgre(items, item_flags,
next_protocol,
error);
if (ret < 0)
return ret;
last_item = MLX5_FLOW_LAYER_NVGRE;
break;
case RTE_FLOW_ITEM_TYPE_GRE_KEY:
ret = mlx5_flow_validate_item_gre_key
(items, item_flags, gre_item, error);
if (ret < 0)
return ret;
last_item = MLX5_FLOW_LAYER_GRE_KEY;
break;
case RTE_FLOW_ITEM_TYPE_VXLAN:
ret = mlx5_flow_validate_item_vxlan(dev, udp_dport,
items, item_flags,
is_root, error);
if (ret < 0)
return ret;
last_item = MLX5_FLOW_LAYER_VXLAN;
break;
case RTE_FLOW_ITEM_TYPE_VXLAN_GPE:
ret = mlx5_flow_validate_item_vxlan_gpe(items,
item_flags, dev,
error);
if (ret < 0)
return ret;
last_item = MLX5_FLOW_LAYER_VXLAN_GPE;
break;
case RTE_FLOW_ITEM_TYPE_GENEVE:
ret = mlx5_flow_validate_item_geneve(items,
item_flags, dev,
error);
if (ret < 0)
return ret;
geneve_item = items;
last_item = MLX5_FLOW_LAYER_GENEVE;
break;
case RTE_FLOW_ITEM_TYPE_GENEVE_OPT:
ret = mlx5_flow_validate_item_geneve_opt(items,
last_item,
geneve_item,
dev,
error);
if (ret < 0)
return ret;
last_item = MLX5_FLOW_LAYER_GENEVE_OPT;
break;
case RTE_FLOW_ITEM_TYPE_MPLS:
ret = mlx5_flow_validate_item_mpls(dev, items,
item_flags,
last_item, error);
if (ret < 0)
return ret;
last_item = MLX5_FLOW_LAYER_MPLS;
break;
case RTE_FLOW_ITEM_TYPE_MARK:
ret = flow_dv_validate_item_mark(dev, items, attr,
error);
if (ret < 0)
return ret;
last_item = MLX5_FLOW_ITEM_MARK;
break;
case RTE_FLOW_ITEM_TYPE_META:
ret = flow_dv_validate_item_meta(dev, items, attr,
error);
if (ret < 0)
return ret;
last_item = MLX5_FLOW_ITEM_METADATA;
break;
case RTE_FLOW_ITEM_TYPE_ICMP:
ret = mlx5_flow_validate_item_icmp(items, item_flags,
next_protocol,
error);
if (ret < 0)
return ret;
last_item = MLX5_FLOW_LAYER_ICMP;
break;
case RTE_FLOW_ITEM_TYPE_ICMP6:
ret = mlx5_flow_validate_item_icmp6(items, item_flags,
next_protocol,
error);
if (ret < 0)
return ret;
item_ipv6_proto = IPPROTO_ICMPV6;
last_item = MLX5_FLOW_LAYER_ICMP6;
break;
case RTE_FLOW_ITEM_TYPE_TAG:
ret = flow_dv_validate_item_tag(dev, items,
attr, error);
if (ret < 0)
return ret;
last_item = MLX5_FLOW_ITEM_TAG;
break;
case MLX5_RTE_FLOW_ITEM_TYPE_SQ:
last_item = MLX5_FLOW_ITEM_SQ;
break;
case MLX5_RTE_FLOW_ITEM_TYPE_TAG:
break;
case RTE_FLOW_ITEM_TYPE_GTP:
ret = flow_dv_validate_item_gtp(dev, items, item_flags,
error);
if (ret < 0)
return ret;
gtp_item = items;
last_item = MLX5_FLOW_LAYER_GTP;
break;
case RTE_FLOW_ITEM_TYPE_GTP_PSC:
ret = flow_dv_validate_item_gtp_psc(items, last_item,
gtp_item, is_root,
error);
if (ret < 0)
return ret;
last_item = MLX5_FLOW_LAYER_GTP_PSC;
break;
case RTE_FLOW_ITEM_TYPE_ECPRI:
/* Capacity will be checked in the translate stage. */
ret = mlx5_flow_validate_item_ecpri(items, item_flags,
last_item,
ether_type,
&nic_ecpri_mask,
error);
if (ret < 0)
return ret;
last_item = MLX5_FLOW_LAYER_ECPRI;
break;
case RTE_FLOW_ITEM_TYPE_INTEGRITY:
ret = flow_dv_validate_item_integrity(dev, items,
item_flags,
&last_item,
integrity_items,
error);
if (ret < 0)
return ret;
break;
case RTE_FLOW_ITEM_TYPE_CONNTRACK:
ret = flow_dv_validate_item_aso_ct(dev, items,
&item_flags, error);
if (ret < 0)
return ret;
break;
case MLX5_RTE_FLOW_ITEM_TYPE_TUNNEL:
/* tunnel offload item was processed before
* list it here as a supported type
*/
break;
case RTE_FLOW_ITEM_TYPE_FLEX:
ret = flow_dv_validate_item_flex(dev, items, item_flags,
&last_item,
tunnel != 0, error);
if (ret < 0)
return ret;
break;
case RTE_FLOW_ITEM_TYPE_METER_COLOR:
ret = flow_dv_validate_item_meter_color(dev, items,
attr, error);
if (ret < 0)
return ret;
last_item = MLX5_FLOW_ITEM_METER_COLOR;
break;
default:
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM,
NULL, "item not supported");
}
item_flags |= last_item;
}
if (item_flags & MLX5_FLOW_ITEM_INTEGRITY) {
ret = flow_dv_validate_item_integrity_post(integrity_items,
item_flags, error);
if (ret)
return ret;
}
for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
int type = actions->type;
if (!mlx5_flow_os_action_supported(type))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
actions,
"action not supported");
if (actions_n == MLX5_DV_MAX_NUMBER_OF_ACTIONS)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
actions, "too many actions");
if (action_flags &
MLX5_FLOW_ACTION_METER_WITH_TERMINATED_POLICY)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL, "meter action with policy "
"must be the last action");
switch (type) {
case RTE_FLOW_ACTION_TYPE_VOID:
break;
case RTE_FLOW_ACTION_TYPE_PORT_ID:
case RTE_FLOW_ACTION_TYPE_REPRESENTED_PORT:
ret = flow_dv_validate_action_port_id(dev,
action_flags,
actions,
attr,
error);
if (ret)
return ret;
action_flags |= MLX5_FLOW_ACTION_PORT_ID;
++actions_n;
break;
case RTE_FLOW_ACTION_TYPE_FLAG:
ret = flow_dv_validate_action_flag(dev, action_flags,
attr, error);
if (ret < 0)
return ret;
if (dev_conf->dv_xmeta_en != MLX5_XMETA_MODE_LEGACY) {
/* Count all modify-header actions as one. */
if (!(action_flags &
MLX5_FLOW_MODIFY_HDR_ACTIONS))
++actions_n;
action_flags |= MLX5_FLOW_ACTION_FLAG |
MLX5_FLOW_ACTION_MARK_EXT;
if (action_flags & MLX5_FLOW_ACTION_SAMPLE)
modify_after_mirror = 1;
} else {
action_flags |= MLX5_FLOW_ACTION_FLAG;
++actions_n;
}
rw_act_num += MLX5_ACT_NUM_SET_MARK;
break;
case RTE_FLOW_ACTION_TYPE_MARK:
ret = flow_dv_validate_action_mark(dev, actions,
action_flags,
attr, error);
if (ret < 0)
return ret;
if (dev_conf->dv_xmeta_en != MLX5_XMETA_MODE_LEGACY) {
/* Count all modify-header actions as one. */
if (!(action_flags &
MLX5_FLOW_MODIFY_HDR_ACTIONS))
++actions_n;
action_flags |= MLX5_FLOW_ACTION_MARK |
MLX5_FLOW_ACTION_MARK_EXT;
if (action_flags & MLX5_FLOW_ACTION_SAMPLE)
modify_after_mirror = 1;
} else {
action_flags |= MLX5_FLOW_ACTION_MARK;
++actions_n;
}
rw_act_num += MLX5_ACT_NUM_SET_MARK;
break;
case RTE_FLOW_ACTION_TYPE_SET_META:
ret = flow_dv_validate_action_set_meta(dev, actions,
action_flags,
attr, error);
if (ret < 0)
return ret;
/* Count all modify-header actions as one action. */
if (!(action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS))
++actions_n;
if (action_flags & MLX5_FLOW_ACTION_SAMPLE)
modify_after_mirror = 1;
action_flags |= MLX5_FLOW_ACTION_SET_META;
rw_act_num += MLX5_ACT_NUM_SET_META;
break;
case RTE_FLOW_ACTION_TYPE_SET_TAG:
ret = flow_dv_validate_action_set_tag(dev, actions,
action_flags,
attr, error);
if (ret < 0)
return ret;
/* Count all modify-header actions as one action. */
if (!(action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS))
++actions_n;
if (action_flags & MLX5_FLOW_ACTION_SAMPLE)
modify_after_mirror = 1;
tag_id = ((const struct rte_flow_action_set_tag *)
actions->conf)->index;
action_flags |= MLX5_FLOW_ACTION_SET_TAG;
rw_act_num += MLX5_ACT_NUM_SET_TAG;
break;
case RTE_FLOW_ACTION_TYPE_DROP:
ret = mlx5_flow_validate_action_drop(action_flags,
attr, error);
if (ret < 0)
return ret;
action_flags |= MLX5_FLOW_ACTION_DROP;
++actions_n;
break;
case RTE_FLOW_ACTION_TYPE_QUEUE:
ret = mlx5_flow_validate_action_queue(actions,
action_flags, dev,
attr, error);
if (ret < 0)
return ret;
queue_index = ((const struct rte_flow_action_queue *)
(actions->conf))->index;
action_flags |= MLX5_FLOW_ACTION_QUEUE;
++actions_n;
break;
case RTE_FLOW_ACTION_TYPE_RSS:
rss = actions->conf;
ret = mlx5_flow_validate_action_rss(actions,
action_flags, dev,
attr, item_flags,
error);
if (ret < 0)
return ret;
if (rss && sample_rss &&
(sample_rss->level != rss->level ||
sample_rss->types != rss->types))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"Can't use the different RSS types "
"or level in the same flow");
if (rss != NULL && rss->queue_num)
queue_index = rss->queue[0];
action_flags |= MLX5_FLOW_ACTION_RSS;
++actions_n;
break;
case MLX5_RTE_FLOW_ACTION_TYPE_DEFAULT_MISS:
ret =
mlx5_flow_validate_action_default_miss(action_flags,
attr, error);
if (ret < 0)
return ret;
action_flags |= MLX5_FLOW_ACTION_DEFAULT_MISS;
++actions_n;
break;
case MLX5_RTE_FLOW_ACTION_TYPE_COUNT:
shared_count = true;
/* fall-through. */
case RTE_FLOW_ACTION_TYPE_COUNT:
ret = flow_dv_validate_action_count(dev, shared_count,
action_flags,
is_root, error);
if (ret < 0)
return ret;
count = actions->conf;
action_flags |= MLX5_FLOW_ACTION_COUNT;
++actions_n;
break;
case RTE_FLOW_ACTION_TYPE_OF_POP_VLAN:
if (flow_dv_validate_action_pop_vlan(dev,
action_flags,
actions,
item_flags, attr,
error))
return -rte_errno;
if (action_flags & MLX5_FLOW_ACTION_SAMPLE)
modify_after_mirror = 1;
action_flags |= MLX5_FLOW_ACTION_OF_POP_VLAN;
++actions_n;
break;
case RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN:
ret = flow_dv_validate_action_push_vlan(dev,
action_flags,
vlan_m,
actions, attr,
error);
if (ret < 0)
return ret;
if (action_flags & MLX5_FLOW_ACTION_SAMPLE)
modify_after_mirror = 1;
action_flags |= MLX5_FLOW_ACTION_OF_PUSH_VLAN;
++actions_n;
break;
case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP:
ret = flow_dv_validate_action_set_vlan_pcp
(action_flags, actions, error);
if (ret < 0)
return ret;
if (action_flags & MLX5_FLOW_ACTION_SAMPLE)
modify_after_mirror = 1;
/* Count PCP with push_vlan command. */
action_flags |= MLX5_FLOW_ACTION_OF_SET_VLAN_PCP;
break;
case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID:
ret = flow_dv_validate_action_set_vlan_vid
(item_flags, action_flags,
actions, error);
if (ret < 0)
return ret;
if (action_flags & MLX5_FLOW_ACTION_SAMPLE)
modify_after_mirror = 1;
/* Count VID with push_vlan command. */
action_flags |= MLX5_FLOW_ACTION_OF_SET_VLAN_VID;
rw_act_num += MLX5_ACT_NUM_MDF_VID;
break;
case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP:
case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP:
ret = flow_dv_validate_action_l2_encap(dev,
action_flags,
actions, attr,
error);
if (ret < 0)
return ret;
action_flags |= MLX5_FLOW_ACTION_ENCAP;
++actions_n;
break;
case RTE_FLOW_ACTION_TYPE_VXLAN_DECAP:
case RTE_FLOW_ACTION_TYPE_NVGRE_DECAP:
ret = flow_dv_validate_action_decap(dev, action_flags,
actions, item_flags,
attr, error);
if (ret < 0)
return ret;
if (action_flags & MLX5_FLOW_ACTION_SAMPLE)
modify_after_mirror = 1;
action_flags |= MLX5_FLOW_ACTION_DECAP;
++actions_n;
break;
case RTE_FLOW_ACTION_TYPE_RAW_ENCAP:
ret = flow_dv_validate_action_raw_encap_decap
(dev, NULL, actions->conf, attr, &action_flags,
&actions_n, actions, item_flags, error);
if (ret < 0)
return ret;
break;
case RTE_FLOW_ACTION_TYPE_RAW_DECAP:
decap = actions->conf;
while ((++actions)->type == RTE_FLOW_ACTION_TYPE_VOID)
;
if (actions->type != RTE_FLOW_ACTION_TYPE_RAW_ENCAP) {
encap = NULL;
actions--;
} else {
encap = actions->conf;
}
ret = flow_dv_validate_action_raw_encap_decap
(dev,
decap ? decap : &empty_decap, encap,
attr, &action_flags, &actions_n,
actions, item_flags, error);
if (ret < 0)
return ret;
if ((action_flags & MLX5_FLOW_ACTION_SAMPLE) &&
(action_flags & MLX5_FLOW_ACTION_DECAP))
modify_after_mirror = 1;
break;
case RTE_FLOW_ACTION_TYPE_SET_MAC_SRC:
case RTE_FLOW_ACTION_TYPE_SET_MAC_DST:
ret = flow_dv_validate_action_modify_mac(action_flags,
actions,
item_flags,
error);
if (ret < 0)
return ret;
/* Count all modify-header actions as one action. */
if (!(action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS))
++actions_n;
action_flags |= actions->type ==
RTE_FLOW_ACTION_TYPE_SET_MAC_SRC ?
MLX5_FLOW_ACTION_SET_MAC_SRC :
MLX5_FLOW_ACTION_SET_MAC_DST;
if (action_flags & MLX5_FLOW_ACTION_SAMPLE)
modify_after_mirror = 1;
/*
* Even if the source and destination MAC addresses have
* overlap in the header with 4B alignment, the convert
* function will handle them separately and 4 SW actions
* will be created. And 2 actions will be added each
* time no matter how many bytes of address will be set.
*/
rw_act_num += MLX5_ACT_NUM_MDF_MAC;
break;
case RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC:
case RTE_FLOW_ACTION_TYPE_SET_IPV4_DST:
ret = flow_dv_validate_action_modify_ipv4(action_flags,
actions,
item_flags,
error);
if (ret < 0)
return ret;
/* Count all modify-header actions as one action. */
if (!(action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS))
++actions_n;
if (action_flags & MLX5_FLOW_ACTION_SAMPLE)
modify_after_mirror = 1;
action_flags |= actions->type ==
RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC ?
MLX5_FLOW_ACTION_SET_IPV4_SRC :
MLX5_FLOW_ACTION_SET_IPV4_DST;
rw_act_num += MLX5_ACT_NUM_MDF_IPV4;
break;
case RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC:
case RTE_FLOW_ACTION_TYPE_SET_IPV6_DST:
ret = flow_dv_validate_action_modify_ipv6(action_flags,
actions,
item_flags,
error);
if (ret < 0)
return ret;
if (item_ipv6_proto == IPPROTO_ICMPV6)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
actions,
"Can't change header "
"with ICMPv6 proto");
/* Count all modify-header actions as one action. */
if (!(action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS))
++actions_n;
if (action_flags & MLX5_FLOW_ACTION_SAMPLE)
modify_after_mirror = 1;
action_flags |= actions->type ==
RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC ?
MLX5_FLOW_ACTION_SET_IPV6_SRC :
MLX5_FLOW_ACTION_SET_IPV6_DST;
rw_act_num += MLX5_ACT_NUM_MDF_IPV6;
break;
case RTE_FLOW_ACTION_TYPE_SET_TP_SRC:
case RTE_FLOW_ACTION_TYPE_SET_TP_DST:
ret = flow_dv_validate_action_modify_tp(action_flags,
actions,
item_flags,
error);
if (ret < 0)
return ret;
/* Count all modify-header actions as one action. */
if (!(action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS))
++actions_n;
if (action_flags & MLX5_FLOW_ACTION_SAMPLE)
modify_after_mirror = 1;
action_flags |= actions->type ==
RTE_FLOW_ACTION_TYPE_SET_TP_SRC ?
MLX5_FLOW_ACTION_SET_TP_SRC :
MLX5_FLOW_ACTION_SET_TP_DST;
rw_act_num += MLX5_ACT_NUM_MDF_PORT;
break;
case RTE_FLOW_ACTION_TYPE_DEC_TTL:
case RTE_FLOW_ACTION_TYPE_SET_TTL:
ret = flow_dv_validate_action_modify_ttl(action_flags,
actions,
item_flags,
error);
if (ret < 0)
return ret;
/* Count all modify-header actions as one action. */
if (!(action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS))
++actions_n;
if (action_flags & MLX5_FLOW_ACTION_SAMPLE)
modify_after_mirror = 1;
action_flags |= actions->type ==
RTE_FLOW_ACTION_TYPE_SET_TTL ?
MLX5_FLOW_ACTION_SET_TTL :
MLX5_FLOW_ACTION_DEC_TTL;
rw_act_num += MLX5_ACT_NUM_MDF_TTL;
break;
case RTE_FLOW_ACTION_TYPE_JUMP:
ret = flow_dv_validate_action_jump(dev, tunnel, actions,
action_flags,
attr, external,
error);
if (ret)
return ret;
if ((action_flags & MLX5_FLOW_ACTION_SAMPLE) &&
fdb_mirror_limit)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"sample and jump action combination is not supported");
++actions_n;
action_flags |= MLX5_FLOW_ACTION_JUMP;
break;
case RTE_FLOW_ACTION_TYPE_INC_TCP_SEQ:
case RTE_FLOW_ACTION_TYPE_DEC_TCP_SEQ:
ret = flow_dv_validate_action_modify_tcp_seq
(action_flags,
actions,
item_flags,
error);
if (ret < 0)
return ret;
/* Count all modify-header actions as one action. */
if (!(action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS))
++actions_n;
if (action_flags & MLX5_FLOW_ACTION_SAMPLE)
modify_after_mirror = 1;
action_flags |= actions->type ==
RTE_FLOW_ACTION_TYPE_INC_TCP_SEQ ?
MLX5_FLOW_ACTION_INC_TCP_SEQ :
MLX5_FLOW_ACTION_DEC_TCP_SEQ;
rw_act_num += MLX5_ACT_NUM_MDF_TCPSEQ;
break;
case RTE_FLOW_ACTION_TYPE_INC_TCP_ACK:
case RTE_FLOW_ACTION_TYPE_DEC_TCP_ACK:
ret = flow_dv_validate_action_modify_tcp_ack
(action_flags,
actions,
item_flags,
error);
if (ret < 0)
return ret;
/* Count all modify-header actions as one action. */
if (!(action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS))
++actions_n;
if (action_flags & MLX5_FLOW_ACTION_SAMPLE)
modify_after_mirror = 1;
action_flags |= actions->type ==
RTE_FLOW_ACTION_TYPE_INC_TCP_ACK ?
MLX5_FLOW_ACTION_INC_TCP_ACK :
MLX5_FLOW_ACTION_DEC_TCP_ACK;
rw_act_num += MLX5_ACT_NUM_MDF_TCPACK;
break;
case MLX5_RTE_FLOW_ACTION_TYPE_MARK:
break;
case MLX5_RTE_FLOW_ACTION_TYPE_TAG:
case MLX5_RTE_FLOW_ACTION_TYPE_COPY_MREG:
rw_act_num += MLX5_ACT_NUM_SET_TAG;
break;
case RTE_FLOW_ACTION_TYPE_METER:
ret = mlx5_flow_validate_action_meter(dev,
action_flags,
item_flags,
actions, attr,
port_id_item,
&def_policy,
error);
if (ret < 0)
return ret;
action_flags |= MLX5_FLOW_ACTION_METER;
if (!def_policy)
action_flags |=
MLX5_FLOW_ACTION_METER_WITH_TERMINATED_POLICY;
++actions_n;
/* Meter action will add one more TAG action. */
rw_act_num += MLX5_ACT_NUM_SET_TAG;
break;
case MLX5_RTE_FLOW_ACTION_TYPE_AGE:
if (is_root)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"Shared ASO age action is not supported for group 0");
if (action_flags & MLX5_FLOW_ACTION_AGE)
return rte_flow_error_set
(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"duplicate age actions set");
action_flags |= MLX5_FLOW_ACTION_AGE;
++actions_n;
break;
case RTE_FLOW_ACTION_TYPE_AGE:
non_shared_age = actions->conf;
ret = flow_dv_validate_action_age(action_flags,
actions, dev,
error);
if (ret < 0)
return ret;
/*
* Validate the regular AGE action (using counter)
* mutual exclusion with indirect counter actions.
*/
if (!flow_hit_aso_supported(priv, is_root)) {
if (shared_count)
return rte_flow_error_set
(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"old age and indirect count combination is not supported");
if (sample_count)
return rte_flow_error_set
(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"old age action and count must be in the same sub flow");
}
action_flags |= MLX5_FLOW_ACTION_AGE;
++actions_n;
break;
case RTE_FLOW_ACTION_TYPE_SET_IPV4_DSCP:
ret = flow_dv_validate_action_modify_ipv4_dscp
(action_flags,
actions,
item_flags,
error);
if (ret < 0)
return ret;
/* Count all modify-header actions as one action. */
if (!(action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS))
++actions_n;
if (action_flags & MLX5_FLOW_ACTION_SAMPLE)
modify_after_mirror = 1;
action_flags |= MLX5_FLOW_ACTION_SET_IPV4_DSCP;
rw_act_num += MLX5_ACT_NUM_SET_DSCP;
break;
case RTE_FLOW_ACTION_TYPE_SET_IPV6_DSCP:
ret = flow_dv_validate_action_modify_ipv6_dscp
(action_flags,
actions,
item_flags,
error);
if (ret < 0)
return ret;
/* Count all modify-header actions as one action. */
if (!(action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS))
++actions_n;
if (action_flags & MLX5_FLOW_ACTION_SAMPLE)
modify_after_mirror = 1;
action_flags |= MLX5_FLOW_ACTION_SET_IPV6_DSCP;
rw_act_num += MLX5_ACT_NUM_SET_DSCP;
break;
case RTE_FLOW_ACTION_TYPE_SAMPLE:
ret = flow_dv_validate_action_sample(&action_flags,
actions, dev,
attr, item_flags,
rss, &sample_rss,
&sample_count,
&fdb_mirror_limit,
is_root,
error);
if (ret < 0)
return ret;
if ((action_flags & MLX5_FLOW_ACTION_SET_TAG) &&
tag_id == 0 && priv->mtr_color_reg == REG_NON)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"sample after tag action causes metadata tag index 0 corruption");
action_flags |= MLX5_FLOW_ACTION_SAMPLE;
++actions_n;
break;
case RTE_FLOW_ACTION_TYPE_MODIFY_FIELD:
ret = flow_dv_validate_action_modify_field(dev,
action_flags,
actions,
attr,
is_root,
error);
if (ret < 0)
return ret;
if (action_flags & MLX5_FLOW_ACTION_SAMPLE)
modify_after_mirror = 1;
/* Count all modify-header actions as one action. */
if (!(action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS))
++actions_n;
action_flags |= MLX5_FLOW_ACTION_MODIFY_FIELD;
rw_act_num += ret;
break;
case RTE_FLOW_ACTION_TYPE_CONNTRACK:
ret = flow_dv_validate_action_aso_ct(dev, action_flags,
item_flags,
is_root, error);
if (ret < 0)
return ret;
action_flags |= MLX5_FLOW_ACTION_CT;
break;
case MLX5_RTE_FLOW_ACTION_TYPE_TUNNEL_SET:
/* tunnel offload action was processed before
* list it here as a supported type
*/
break;
#ifdef HAVE_MLX5DV_DR_ACTION_CREATE_DEST_ROOT_TABLE
case RTE_FLOW_ACTION_TYPE_SEND_TO_KERNEL:
action_flags |= MLX5_FLOW_ACTION_SEND_TO_KERNEL;
++actions_n;
break;
#endif
default:
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
actions,
"action not supported");
}
}
/*
* Validate actions in flow rules
* - Explicit decap action is prohibited by the tunnel offload API.
* - Drop action in tunnel steer rule is prohibited by the API.
* - Application cannot use MARK action because it's value can mask
* tunnel default miss notification.
* - JUMP in tunnel match rule has no support in current PMD
* implementation.
* - TAG & META are reserved for future uses.
*/
if (action_flags & MLX5_FLOW_ACTION_TUNNEL_SET) {
uint64_t bad_actions_mask = MLX5_FLOW_ACTION_DECAP |
MLX5_FLOW_ACTION_MARK |
MLX5_FLOW_ACTION_SET_TAG |
MLX5_FLOW_ACTION_SET_META |
MLX5_FLOW_ACTION_DROP;
if (action_flags & bad_actions_mask)
return rte_flow_error_set
(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"Invalid RTE action in tunnel "
"set decap rule");
if (!(action_flags & MLX5_FLOW_ACTION_JUMP))
return rte_flow_error_set
(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"tunnel set decap rule must terminate "
"with JUMP");
if (!attr->ingress)
return rte_flow_error_set
(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"tunnel flows for ingress traffic only");
}
if (action_flags & MLX5_FLOW_ACTION_TUNNEL_MATCH) {
uint64_t bad_actions_mask = MLX5_FLOW_ACTION_JUMP |
MLX5_FLOW_ACTION_MARK |
MLX5_FLOW_ACTION_SET_TAG |
MLX5_FLOW_ACTION_SET_META;
if (action_flags & bad_actions_mask)
return rte_flow_error_set
(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"Invalid RTE action in tunnel "
"set match rule");
}
/*
* Validate the drop action mutual exclusion with other actions.
* Drop action is mutually-exclusive with any other action, except for
* Count action.
* Drop action compatibility with tunnel offload was already validated.
*/
if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_MATCH |
MLX5_FLOW_ACTION_TUNNEL_MATCH));
else if ((action_flags & MLX5_FLOW_ACTION_DROP) &&
(action_flags & ~(MLX5_FLOW_ACTION_DROP | MLX5_FLOW_ACTION_COUNT)))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"Drop action is mutually-exclusive "
"with any other action, except for "
"Count action");
/* Eswitch has few restrictions on using items and actions */
if (attr->transfer) {
if (!mlx5_flow_ext_mreg_supported(dev) &&
action_flags & MLX5_FLOW_ACTION_FLAG)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"unsupported action FLAG");
if (!mlx5_flow_ext_mreg_supported(dev) &&
action_flags & MLX5_FLOW_ACTION_MARK)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"unsupported action MARK");
if (action_flags & MLX5_FLOW_ACTION_QUEUE)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"unsupported action QUEUE");
if (action_flags & MLX5_FLOW_ACTION_RSS)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"unsupported action RSS");
if (!(action_flags & MLX5_FLOW_FATE_ESWITCH_ACTIONS))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
actions,
"no fate action is found");
} else {
if (!(action_flags & MLX5_FLOW_FATE_ACTIONS) && attr->ingress)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
actions,
"no fate action is found");
}
/*
* Continue validation for Xcap and VLAN actions.
* If hairpin is working in explicit TX rule mode, there is no actions
* splitting and the validation of hairpin ingress flow should be the
* same as other standard flows.
*/
if ((action_flags & (MLX5_FLOW_XCAP_ACTIONS |
MLX5_FLOW_VLAN_ACTIONS)) &&
(queue_index == 0xFFFF || !mlx5_rxq_is_hairpin(dev, queue_index) ||
((conf = mlx5_rxq_get_hairpin_conf(dev, queue_index)) != NULL &&
conf->tx_explicit != 0))) {
if ((action_flags & MLX5_FLOW_XCAP_ACTIONS) ==
MLX5_FLOW_XCAP_ACTIONS)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL, "encap and decap "
"combination aren't supported");
/* Push VLAN is not supported in ingress except for NICs newer than CX5. */
if (action_flags & MLX5_FLOW_ACTION_OF_PUSH_VLAN) {
struct mlx5_dev_ctx_shared *sh = priv->sh;
bool direction_error = false;
if (attr->transfer) {
bool fdb_tx = priv->representor_id != UINT16_MAX;
bool is_cx5 = sh->steering_format_version ==
MLX5_STEERING_LOGIC_FORMAT_CONNECTX_5;
if (!fdb_tx && is_cx5)
direction_error = true;
} else if (attr->ingress) {
direction_error = true;
}
if (direction_error)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
NULL,
"push VLAN action not supported "
"for ingress");
}
if (!attr->transfer && attr->ingress) {
if (action_flags & MLX5_FLOW_ACTION_ENCAP)
return rte_flow_error_set
(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL, "encap is not supported"
" for ingress traffic");
else if ((action_flags & MLX5_FLOW_VLAN_ACTIONS) ==
MLX5_FLOW_VLAN_ACTIONS)
return rte_flow_error_set
(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL, "no support for "
"multiple VLAN actions");
}
}
if (action_flags & MLX5_FLOW_ACTION_METER_WITH_TERMINATED_POLICY) {
if ((action_flags & (MLX5_FLOW_FATE_ACTIONS &
~MLX5_FLOW_ACTION_METER_WITH_TERMINATED_POLICY)) &&
attr->ingress)
return rte_flow_error_set
(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL, "fate action not supported for "
"meter with policy");
if (attr->egress) {
if (action_flags & MLX5_FLOW_MODIFY_HDR_ACTIONS)
return rte_flow_error_set
(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL, "modify header action in egress "
"cannot be done before meter action");
if (action_flags & MLX5_FLOW_ACTION_ENCAP)
return rte_flow_error_set
(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL, "encap action in egress "
"cannot be done before meter action");
if (action_flags & MLX5_FLOW_ACTION_OF_PUSH_VLAN)
return rte_flow_error_set
(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL, "push vlan action in egress "
"cannot be done before meter action");
}
}
/*
* Only support one ASO action in a single flow rule.
* non-shared AGE + counter will fallback to use HW counter, no ASO hit object.
* Group 0 uses HW counter for AGE too even if no counter action.
*/
aso_mask = (action_flags & MLX5_FLOW_ACTION_METER && priv->sh->meter_aso_en) << 2 |
(action_flags & MLX5_FLOW_ACTION_CT && priv->sh->ct_aso_en) << 1 |
(action_flags & MLX5_FLOW_ACTION_AGE &&
!(non_shared_age && count) &&
(attr->group || (attr->transfer && priv->fdb_def_rule)) &&
priv->sh->flow_hit_aso_en);
if (__builtin_popcountl(aso_mask) > 1)
return rte_flow_error_set(error, ENOTSUP, RTE_FLOW_ERROR_TYPE_ACTION,
NULL, "unsupported combining AGE, METER, CT ASO actions in a single rule");
/*
* Hairpin flow will add one more TAG action in TX implicit mode.
* In TX explicit mode, there will be no hairpin flow ID.
*/
if (hairpin > 0)
rw_act_num += MLX5_ACT_NUM_SET_TAG;
/* extra metadata enabled: one more TAG action will be add. */
if (dev_conf->dv_flow_en &&
dev_conf->dv_xmeta_en != MLX5_XMETA_MODE_LEGACY &&
mlx5_flow_ext_mreg_supported(dev))
rw_act_num += MLX5_ACT_NUM_SET_TAG;
if (rw_act_num >
flow_dv_modify_hdr_action_max(dev, is_root)) {
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL, "too many header modify"
" actions to support");
}
/* Eswitch egress mirror and modify flow has limitation on CX5 */
if (fdb_mirror_limit && modify_after_mirror)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"sample before modify action is not supported");
/*
* Validation the NIC Egress flow on representor, except implicit
* hairpin default egress flow with TX_QUEUE item, other flows not
* work due to metadata regC0 mismatch.
*/
if ((!attr->transfer && attr->egress) && priv->representor &&
!(item_flags & MLX5_FLOW_ITEM_SQ))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ITEM,
NULL,
"NIC egress rules on representors"
" is not supported");
return 0;
}
/**
* Internal preparation function. Allocates the DV flow size,
* this size is constant.
*
* @param[in] dev
* Pointer to the rte_eth_dev structure.
* @param[in] attr
* Pointer to the flow attributes.
* @param[in] items
* Pointer to the list of items.
* @param[in] actions
* Pointer to the list of actions.
* @param[out] error
* Pointer to the error structure.
*
* @return
* Pointer to mlx5_flow object on success,
* otherwise NULL and rte_errno is set.
*/
static struct mlx5_flow *
flow_dv_prepare(struct rte_eth_dev *dev,
const struct rte_flow_attr *attr __rte_unused,
const struct rte_flow_item items[] __rte_unused,
const struct rte_flow_action actions[] __rte_unused,
struct rte_flow_error *error)
{
uint32_t handle_idx = 0;
struct mlx5_flow *dev_flow;
struct mlx5_flow_handle *dev_handle;
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_flow_workspace *wks = mlx5_flow_get_thread_workspace();
MLX5_ASSERT(wks);
wks->skip_matcher_reg = 0;
wks->policy = NULL;
wks->final_policy = NULL;
/* In case of corrupting the memory. */
if (wks->flow_idx >= MLX5_NUM_MAX_DEV_FLOWS) {
rte_flow_error_set(error, ENOSPC,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"not free temporary device flow");
return NULL;
}
dev_handle = mlx5_ipool_zmalloc(priv->sh->ipool[MLX5_IPOOL_MLX5_FLOW],
&handle_idx);
if (!dev_handle) {
rte_flow_error_set(error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"not enough memory to create flow handle");
return NULL;
}
MLX5_ASSERT(wks->flow_idx < RTE_DIM(wks->flows));
dev_flow = &wks->flows[wks->flow_idx++];
memset(dev_flow, 0, sizeof(*dev_flow));
dev_flow->handle = dev_handle;
dev_flow->handle_idx = handle_idx;
dev_flow->dv.value.size = MLX5_ST_SZ_BYTES(fte_match_param);
dev_flow->ingress = attr->ingress;
dev_flow->dv.transfer = attr->transfer;
return dev_flow;
}
#ifdef RTE_LIBRTE_MLX5_DEBUG
/**
* Sanity check for match mask and value. Similar to check_valid_spec() in
* kernel driver. If unmasked bit is present in value, it returns failure.
*
* @param match_mask
* pointer to match mask buffer.
* @param match_value
* pointer to match value buffer.
*
* @return
* 0 if valid, -EINVAL otherwise.
*/
static int
flow_dv_check_valid_spec(void *match_mask, void *match_value)
{
uint8_t *m = match_mask;
uint8_t *v = match_value;
unsigned int i;
for (i = 0; i < MLX5_ST_SZ_BYTES(fte_match_param); ++i) {
if (v[i] & ~m[i]) {
DRV_LOG(ERR,
"match_value differs from match_criteria"
" %p[%u] != %p[%u]",
match_value, i, match_mask, i);
return -EINVAL;
}
}
return 0;
}
#endif
/**
* Add match of ip_version.
*
* @param[in] group
* Flow group.
* @param[in] headers_v
* Values header pointer.
* @param[in] headers_m
* Masks header pointer.
* @param[in] ip_version
* The IP version to set.
*/
static inline void
flow_dv_set_match_ip_version(uint32_t group,
void *headers_v,
uint32_t key_type,
uint8_t ip_version)
{
if (group == 0 && (key_type & MLX5_SET_MATCHER_M))
MLX5_SET(fte_match_set_lyr_2_4, headers_v, ip_version, 0xf);
else
MLX5_SET(fte_match_set_lyr_2_4, headers_v, ip_version,
ip_version);
MLX5_SET(fte_match_set_lyr_2_4, headers_v, ethertype, 0);
}
/**
* Add Ethernet item to the value.
*
* @param[in, out] key
* Flow matcher value.
* @param[in] item
* Flow pattern to translate.
* @param[in] inner
* Item is inner pattern.
* @param[in] grpup
* Flow matcher group.
* @param[in] key_type
* Set flow matcher mask or value.
*/
static void
flow_dv_translate_item_eth(void *key, const struct rte_flow_item *item,
int inner, uint32_t group, uint32_t key_type)
{
const struct rte_flow_item_eth *eth_vv = item->spec;
const struct rte_flow_item_eth *eth_m;
const struct rte_flow_item_eth *eth_v;
const struct rte_flow_item_eth nic_mask = {
.dst.addr_bytes = "\xff\xff\xff\xff\xff\xff",
.src.addr_bytes = "\xff\xff\xff\xff\xff\xff",
.type = RTE_BE16(0xffff),
.has_vlan = 0,
};
void *hdrs_v;
char *l24_v;
unsigned int i;
if (MLX5_ITEM_VALID(item, key_type))
return;
MLX5_ITEM_UPDATE(item, key_type, eth_v, eth_m, &nic_mask);
if (!eth_vv)
eth_vv = eth_v;
if (inner)
hdrs_v = MLX5_ADDR_OF(fte_match_param, key, inner_headers);
else
hdrs_v = MLX5_ADDR_OF(fte_match_param, key, outer_headers);
/* The value must be in the range of the mask. */
l24_v = MLX5_ADDR_OF(fte_match_set_lyr_2_4, hdrs_v, dmac_47_16);
for (i = 0; i < sizeof(eth_m->dst); ++i)
l24_v[i] = eth_m->dst.addr_bytes[i] & eth_v->dst.addr_bytes[i];
l24_v = MLX5_ADDR_OF(fte_match_set_lyr_2_4, hdrs_v, smac_47_16);
/* The value must be in the range of the mask. */
for (i = 0; i < sizeof(eth_m->dst); ++i)
l24_v[i] = eth_m->src.addr_bytes[i] & eth_v->src.addr_bytes[i];
/*
* HW supports match on one Ethertype, the Ethertype following the last
* VLAN tag of the packet (see PRM).
* Set match on ethertype only if ETH header is not followed by VLAN.
* HW is optimized for IPv4/IPv6. In such cases, avoid setting
* ethertype, and use ip_version field instead.
* eCPRI over Ether layer will use type value 0xAEFE.
*/
if (eth_m->type == 0xFFFF) {
rte_be16_t type = eth_v->type;
/*
* When set the matcher mask, refer to the original spec
* value.
*/
if (key_type == MLX5_SET_MATCHER_SW_M) {
MLX5_SET(fte_match_set_lyr_2_4, hdrs_v, cvlan_tag, 1);
type = eth_vv->type;
}
/* Set cvlan_tag mask for any single\multi\un-tagged case. */
switch (type) {
case RTE_BE16(RTE_ETHER_TYPE_VLAN):
MLX5_SET(fte_match_set_lyr_2_4, hdrs_v, cvlan_tag, 1);
return;
case RTE_BE16(RTE_ETHER_TYPE_QINQ):
MLX5_SET(fte_match_set_lyr_2_4, hdrs_v, svlan_tag, 1);
return;
case RTE_BE16(RTE_ETHER_TYPE_IPV4):
flow_dv_set_match_ip_version(group, hdrs_v, key_type,
4);
return;
case RTE_BE16(RTE_ETHER_TYPE_IPV6):
flow_dv_set_match_ip_version(group, hdrs_v, key_type,
6);
return;
default:
break;
}
}
/*
* Only SW steering value should refer to the mask value.
* Other cases are using the fake masks, just ignore the mask.
*/
if (eth_v->has_vlan && eth_m->has_vlan) {
/*
* Here, when also has_more_vlan field in VLAN item is
* not set, only single-tagged packets will be matched.
*/
MLX5_SET(fte_match_set_lyr_2_4, hdrs_v, cvlan_tag, 1);
if (key_type != MLX5_SET_MATCHER_HS_M && eth_vv->has_vlan)
return;
}
l24_v = MLX5_ADDR_OF(fte_match_set_lyr_2_4, hdrs_v, ethertype);
*(uint16_t *)(l24_v) = eth_m->type & eth_v->type;
}
/**
* Add VLAN item to the value.
*
* @param[in, out] key
* Flow matcher value.
* @param[in] item
* Flow pattern to translate.
* @param[in] inner
* Item is inner pattern.
* @param[in] wks
* Item workspace.
* @param[in] key_type
* Set flow matcher mask or value.
*/
static void
flow_dv_translate_item_vlan(void *key, const struct rte_flow_item *item,
int inner, struct mlx5_dv_matcher_workspace *wks,
uint32_t key_type)
{
const struct rte_flow_item_vlan *vlan_m;
const struct rte_flow_item_vlan *vlan_v;
const struct rte_flow_item_vlan *vlan_vv = item->spec;
void *hdrs_v;
uint16_t tci_v;
if (inner) {
hdrs_v = MLX5_ADDR_OF(fte_match_param, key, inner_headers);
} else {
hdrs_v = MLX5_ADDR_OF(fte_match_param, key, outer_headers);
/*
* This is workaround, masks are not supported,
* and pre-validated.
*/
if (vlan_vv)
wks->vlan_tag = rte_be_to_cpu_16(vlan_vv->tci) & 0x0fff;
}
/*
* When VLAN item exists in flow, mark packet as tagged,
* even if TCI is not specified.
*/
if (!MLX5_GET(fte_match_set_lyr_2_4, hdrs_v, svlan_tag))
MLX5_SET(fte_match_set_lyr_2_4, hdrs_v, cvlan_tag, 1);
if (MLX5_ITEM_VALID(item, key_type))
return;
MLX5_ITEM_UPDATE(item, key_type, vlan_v, vlan_m,
&rte_flow_item_vlan_mask);
tci_v = rte_be_to_cpu_16(vlan_m->tci & vlan_v->tci);
MLX5_SET(fte_match_set_lyr_2_4, hdrs_v, first_vid, tci_v);
MLX5_SET(fte_match_set_lyr_2_4, hdrs_v, first_cfi, tci_v >> 12);
MLX5_SET(fte_match_set_lyr_2_4, hdrs_v, first_prio, tci_v >> 13);
/*
* HW is optimized for IPv4/IPv6. In such cases, avoid setting
* ethertype, and use ip_version field instead.
*/
if (vlan_m->inner_type == 0xFFFF) {
rte_be16_t inner_type = vlan_v->inner_type;
/*
* When set the matcher mask, refer to the original spec
* value.
*/
if (key_type == MLX5_SET_MATCHER_SW_M)
inner_type = vlan_vv->inner_type;
switch (inner_type) {
case RTE_BE16(RTE_ETHER_TYPE_VLAN):
MLX5_SET(fte_match_set_lyr_2_4, hdrs_v, svlan_tag, 1);
if (key_type & MLX5_SET_MATCHER_V)
MLX5_SET(fte_match_set_lyr_2_4, hdrs_v,
cvlan_tag, 0);
return;
case RTE_BE16(RTE_ETHER_TYPE_IPV4):
flow_dv_set_match_ip_version
(wks->group, hdrs_v, key_type, 4);
return;
case RTE_BE16(RTE_ETHER_TYPE_IPV6):
flow_dv_set_match_ip_version
(wks->group, hdrs_v, key_type, 6);
return;
default:
break;
}
}
if (vlan_m->has_more_vlan && vlan_v->has_more_vlan) {
MLX5_SET(fte_match_set_lyr_2_4, hdrs_v, svlan_tag, 1);
/* Only one vlan_tag bit can be set. */
if (key_type & MLX5_SET_MATCHER_V)
MLX5_SET(fte_match_set_lyr_2_4, hdrs_v, cvlan_tag, 0);
return;
}
MLX5_SET(fte_match_set_lyr_2_4, hdrs_v, ethertype,
rte_be_to_cpu_16(vlan_m->inner_type & vlan_v->inner_type));
}
/**
* Add IPV4 item to the value.
*
* @param[in, out] key
* Flow matcher value.
* @param[in] item
* Flow pattern to translate.
* @param[in] inner
* Item is inner pattern.
* @param[in] group
* The group to insert the rule.
* @param[in] key_type
* Set flow matcher mask or value.
*/
static void
flow_dv_translate_item_ipv4(void *key, const struct rte_flow_item *item,
int inner, uint32_t group, uint32_t key_type)
{
const struct rte_flow_item_ipv4 *ipv4_m;
const struct rte_flow_item_ipv4 *ipv4_v;
const struct rte_flow_item_ipv4 nic_mask = {
.hdr = {
.src_addr = RTE_BE32(0xffffffff),
.dst_addr = RTE_BE32(0xffffffff),
.type_of_service = 0xff,
.next_proto_id = 0xff,
.time_to_live = 0xff,
},
};
void *headers_v;
char *l24_v;
uint8_t tos;
headers_v = inner ? MLX5_ADDR_OF(fte_match_param, key, inner_headers) :
MLX5_ADDR_OF(fte_match_param, key, outer_headers);
flow_dv_set_match_ip_version(group, headers_v, key_type, 4);
if (MLX5_ITEM_VALID(item, key_type))
return;
MLX5_ITEM_UPDATE(item, key_type, ipv4_v, ipv4_m, &nic_mask);
l24_v = MLX5_ADDR_OF(fte_match_set_lyr_2_4, headers_v,
dst_ipv4_dst_ipv6.ipv4_layout.ipv4);
*(uint32_t *)l24_v = ipv4_m->hdr.dst_addr & ipv4_v->hdr.dst_addr;
l24_v = MLX5_ADDR_OF(fte_match_set_lyr_2_4, headers_v,
src_ipv4_src_ipv6.ipv4_layout.ipv4);
*(uint32_t *)l24_v = ipv4_m->hdr.src_addr & ipv4_v->hdr.src_addr;
tos = ipv4_m->hdr.type_of_service & ipv4_v->hdr.type_of_service;
MLX5_SET(fte_match_set_lyr_2_4, headers_v, ipv4_ihl,
ipv4_v->hdr.ihl & ipv4_m->hdr.ihl);
if (key_type == MLX5_SET_MATCHER_SW_M)
MLX5_SET(fte_match_set_lyr_2_4, headers_v, ip_ecn,
ipv4_v->hdr.type_of_service);
MLX5_SET(fte_match_set_lyr_2_4, headers_v, ip_ecn, tos);
MLX5_SET(fte_match_set_lyr_2_4, headers_v, ip_dscp, tos >> 2);
MLX5_SET(fte_match_set_lyr_2_4, headers_v, ip_protocol,
ipv4_v->hdr.next_proto_id & ipv4_m->hdr.next_proto_id);
MLX5_SET(fte_match_set_lyr_2_4, headers_v, ip_ttl_hoplimit,
ipv4_v->hdr.time_to_live & ipv4_m->hdr.time_to_live);
MLX5_SET(fte_match_set_lyr_2_4, headers_v, frag,
!!(ipv4_v->hdr.fragment_offset & ipv4_m->hdr.fragment_offset));
}
/**
* Add IPV6 item to the value.
*
* @param[in, out] key
* Flow matcher value.
* @param[in] item
* Flow pattern to translate.
* @param[in] inner
* Item is inner pattern.
* @param[in] group
* The group to insert the rule.
* @param[in] key_type
* Set flow matcher mask or value.
*/
static void
flow_dv_translate_item_ipv6(void *key, const struct rte_flow_item *item,
int inner, uint32_t group, uint32_t key_type)
{
const struct rte_flow_item_ipv6 *ipv6_m;
const struct rte_flow_item_ipv6 *ipv6_v;
const struct rte_flow_item_ipv6 nic_mask = {
.hdr = {
.src_addr =
"\xff\xff\xff\xff\xff\xff\xff\xff"
"\xff\xff\xff\xff\xff\xff\xff\xff",
.dst_addr =
"\xff\xff\xff\xff\xff\xff\xff\xff"
"\xff\xff\xff\xff\xff\xff\xff\xff",
.vtc_flow = RTE_BE32(0xffffffff),
.proto = 0xff,
.hop_limits = 0xff,
},
};
void *headers_v;
void *misc_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters);
char *l24_v;
uint32_t vtc_v;
int i;
int size;
headers_v = inner ? MLX5_ADDR_OF(fte_match_param, key, inner_headers) :
MLX5_ADDR_OF(fte_match_param, key, outer_headers);
flow_dv_set_match_ip_version(group, headers_v, key_type, 6);
if (MLX5_ITEM_VALID(item, key_type))
return;
MLX5_ITEM_UPDATE(item, key_type, ipv6_v, ipv6_m, &nic_mask);
size = sizeof(ipv6_m->hdr.dst_addr);
l24_v = MLX5_ADDR_OF(fte_match_set_lyr_2_4, headers_v,
dst_ipv4_dst_ipv6.ipv6_layout.ipv6);
for (i = 0; i < size; ++i)
l24_v[i] = ipv6_m->hdr.dst_addr[i] & ipv6_v->hdr.dst_addr[i];
l24_v = MLX5_ADDR_OF(fte_match_set_lyr_2_4, headers_v,
src_ipv4_src_ipv6.ipv6_layout.ipv6);
for (i = 0; i < size; ++i)
l24_v[i] = ipv6_m->hdr.src_addr[i] & ipv6_v->hdr.src_addr[i];
/* TOS. */
vtc_v = rte_be_to_cpu_32(ipv6_m->hdr.vtc_flow & ipv6_v->hdr.vtc_flow);
MLX5_SET(fte_match_set_lyr_2_4, headers_v, ip_ecn, vtc_v >> 20);
MLX5_SET(fte_match_set_lyr_2_4, headers_v, ip_dscp, vtc_v >> 22);
/* Label. */
if (inner)
MLX5_SET(fte_match_set_misc, misc_v, inner_ipv6_flow_label,
vtc_v);
else
MLX5_SET(fte_match_set_misc, misc_v, outer_ipv6_flow_label,
vtc_v);
/* Protocol. */
MLX5_SET(fte_match_set_lyr_2_4, headers_v, ip_protocol,
ipv6_v->hdr.proto & ipv6_m->hdr.proto);
/* Hop limit. */
MLX5_SET(fte_match_set_lyr_2_4, headers_v, ip_ttl_hoplimit,
ipv6_v->hdr.hop_limits & ipv6_m->hdr.hop_limits);
MLX5_SET(fte_match_set_lyr_2_4, headers_v, frag,
!!(ipv6_v->has_frag_ext & ipv6_m->has_frag_ext));
}
/**
* Add IPV6 fragment extension item to the value.
*
* @param[in, out] key
* Flow matcher value.
* @param[in] item
* Flow pattern to translate.
* @param[in] inner
* Item is inner pattern.
* @param[in] key_type
* Set flow matcher mask or value.
*/
static void
flow_dv_translate_item_ipv6_frag_ext(void *key,
const struct rte_flow_item *item,
int inner, uint32_t key_type)
{
const struct rte_flow_item_ipv6_frag_ext *ipv6_frag_ext_m;
const struct rte_flow_item_ipv6_frag_ext *ipv6_frag_ext_v;
const struct rte_flow_item_ipv6_frag_ext nic_mask = {
.hdr = {
.next_header = 0xff,
.frag_data = RTE_BE16(0xffff),
},
};
void *headers_v;
headers_v = inner ? MLX5_ADDR_OF(fte_match_param, key, inner_headers) :
MLX5_ADDR_OF(fte_match_param, key, outer_headers);
/* IPv6 fragment extension item exists, so packet is IP fragment. */
MLX5_SET(fte_match_set_lyr_2_4, headers_v, frag, 1);
if (MLX5_ITEM_VALID(item, key_type))
return;
MLX5_ITEM_UPDATE(item, key_type, ipv6_frag_ext_v,
ipv6_frag_ext_m, &nic_mask);
MLX5_SET(fte_match_set_lyr_2_4, headers_v, ip_protocol,
ipv6_frag_ext_v->hdr.next_header &
ipv6_frag_ext_m->hdr.next_header);
}
/**
* Add TCP item to the value.
*
* @param[in, out] key
* Flow matcher value.
* @param[in] item
* Flow pattern to translate.
* @param[in] inner
* Item is inner pattern.
* @param[in] key_type
* Set flow matcher mask or value.
*/
static void
flow_dv_translate_item_tcp(void *key, const struct rte_flow_item *item,
int inner, uint32_t key_type)
{
const struct rte_flow_item_tcp *tcp_m;
const struct rte_flow_item_tcp *tcp_v;
void *headers_v;
headers_v = inner ? MLX5_ADDR_OF(fte_match_param, key, inner_headers) :
MLX5_ADDR_OF(fte_match_param, key, outer_headers);
if (key_type & MLX5_SET_MATCHER_M)
MLX5_SET(fte_match_set_lyr_2_4, headers_v,
ip_protocol, 0xff);
else
MLX5_SET(fte_match_set_lyr_2_4, headers_v,
ip_protocol, IPPROTO_TCP);
if (MLX5_ITEM_VALID(item, key_type))
return;
MLX5_ITEM_UPDATE(item, key_type, tcp_v, tcp_m,
&rte_flow_item_tcp_mask);
MLX5_SET(fte_match_set_lyr_2_4, headers_v, tcp_sport,
rte_be_to_cpu_16(tcp_v->hdr.src_port & tcp_m->hdr.src_port));
MLX5_SET(fte_match_set_lyr_2_4, headers_v, tcp_dport,
rte_be_to_cpu_16(tcp_v->hdr.dst_port & tcp_m->hdr.dst_port));
MLX5_SET(fte_match_set_lyr_2_4, headers_v, tcp_flags,
tcp_v->hdr.tcp_flags & tcp_m->hdr.tcp_flags);
}
/**
* Add ESP item to the value.
*
* @param[in, out] key
* Flow matcher value.
* @param[in] item
* Flow pattern to translate.
* @param[in] inner
* Item is inner pattern.
* @param[in] key_type
* Set flow matcher mask or value.
*/
static void
flow_dv_translate_item_esp(void *key, const struct rte_flow_item *item,
int inner, uint32_t key_type)
{
const struct rte_flow_item_esp *esp_m;
const struct rte_flow_item_esp *esp_v;
void *headers_v;
char *spi_v;
headers_v = inner ? MLX5_ADDR_OF(fte_match_param, key, inner_headers) :
MLX5_ADDR_OF(fte_match_param, key, outer_headers);
if (key_type & MLX5_SET_MATCHER_M)
MLX5_SET(fte_match_set_lyr_2_4, headers_v,
ip_protocol, 0xff);
else
MLX5_SET(fte_match_set_lyr_2_4, headers_v,
ip_protocol, IPPROTO_ESP);
if (MLX5_ITEM_VALID(item, key_type))
return;
MLX5_ITEM_UPDATE(item, key_type, esp_v, esp_m,
&rte_flow_item_esp_mask);
headers_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters);
spi_v = inner ? MLX5_ADDR_OF(fte_match_set_misc, headers_v,
inner_esp_spi) : MLX5_ADDR_OF(fte_match_set_misc
, headers_v, outer_esp_spi);
*(uint32_t *)spi_v = esp_m->hdr.spi & esp_v->hdr.spi;
}
/**
* Add UDP item to the value.
*
* @param[in, out] key
* Flow matcher value.
* @param[in] item
* Flow pattern to translate.
* @param[in] inner
* Item is inner pattern.
* @param[in] key_type
* Set flow matcher mask or value.
*/
static void
flow_dv_translate_item_udp(void *key, const struct rte_flow_item *item,
int inner, struct mlx5_dv_matcher_workspace *wks,
uint32_t key_type)
{
const struct rte_flow_item_udp *udp_m;
const struct rte_flow_item_udp *udp_v;
void *headers_v;
headers_v = inner ? MLX5_ADDR_OF(fte_match_param, key, inner_headers) :
MLX5_ADDR_OF(fte_match_param, key, outer_headers);
if (key_type & MLX5_SET_MATCHER_M)
MLX5_SET(fte_match_set_lyr_2_4, headers_v,
ip_protocol, 0xff);
else
MLX5_SET(fte_match_set_lyr_2_4, headers_v,
ip_protocol, IPPROTO_UDP);
if (MLX5_ITEM_VALID(item, key_type))
return;
MLX5_ITEM_UPDATE(item, key_type, udp_v, udp_m,
&rte_flow_item_udp_mask);
MLX5_SET(fte_match_set_lyr_2_4, headers_v, udp_sport,
rte_be_to_cpu_16(udp_v->hdr.src_port & udp_m->hdr.src_port));
MLX5_SET(fte_match_set_lyr_2_4, headers_v, udp_dport,
rte_be_to_cpu_16(udp_v->hdr.dst_port & udp_m->hdr.dst_port));
/* Force get UDP dport in case to be used in VXLAN translate. */
if (key_type & MLX5_SET_MATCHER_SW) {
udp_v = item->spec;
wks->udp_dport = rte_be_to_cpu_16(udp_v->hdr.dst_port &
udp_m->hdr.dst_port);
}
}
/**
* Add GRE optional Key item to the value.
*
* @param[in, out] key
* Flow matcher value.
* @param[in] item
* Flow pattern to translate.
* @param[in] inner
* Item is inner pattern.
*/
static void
flow_dv_translate_item_gre_key(void *key, const struct rte_flow_item *item,
uint32_t key_type)
{
const rte_be32_t *key_m;
const rte_be32_t *key_v;
void *misc_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters);
rte_be32_t gre_key_default_mask = RTE_BE32(UINT32_MAX);
/* GRE K bit must be on and should already be validated */
MLX5_SET(fte_match_set_misc, misc_v, gre_k_present, 1);
if (MLX5_ITEM_VALID(item, key_type))
return;
MLX5_ITEM_UPDATE(item, key_type, key_v, key_m,
&gre_key_default_mask);
MLX5_SET(fte_match_set_misc, misc_v, gre_key_h,
rte_be_to_cpu_32((*key_v) & (*key_m)) >> 8);
MLX5_SET(fte_match_set_misc, misc_v, gre_key_l,
rte_be_to_cpu_32((*key_v) & (*key_m)) & 0xFF);
}
/**
* Add GRE item to the value.
*
* @param[in, out] key
* Flow matcher value.
* @param[in] item
* Flow pattern to translate.
* @param[in] pattern_flags
* Accumulated pattern flags.
* @param[in] key_type
* Set flow matcher mask or value.
*/
static void
flow_dv_translate_item_gre(void *key, const struct rte_flow_item *item,
uint64_t pattern_flags, uint32_t key_type)
{
static const struct rte_flow_item_gre empty_gre = {0,};
const struct rte_flow_item_gre *gre_m = item->mask;
const struct rte_flow_item_gre *gre_v = item->spec;
void *headers_v = MLX5_ADDR_OF(fte_match_param, key, outer_headers);
void *misc_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters);
struct {
union {
__extension__
struct {
uint16_t version:3;
uint16_t rsvd0:9;
uint16_t s_present:1;
uint16_t k_present:1;
uint16_t rsvd_bit1:1;
uint16_t c_present:1;
};
uint16_t value;
};
} gre_crks_rsvd0_ver_m, gre_crks_rsvd0_ver_v;
uint16_t protocol_m, protocol_v;
if (key_type & MLX5_SET_MATCHER_M)
MLX5_SET(fte_match_set_lyr_2_4, headers_v, ip_protocol, 0xff);
else
MLX5_SET(fte_match_set_lyr_2_4, headers_v, ip_protocol,
IPPROTO_GRE);
if (!gre_v) {
gre_v = &empty_gre;
gre_m = &empty_gre;
} else {
if (!gre_m)
gre_m = &rte_flow_item_gre_mask;
}
if (key_type & MLX5_SET_MATCHER_M)
gre_v = gre_m;
else if (key_type == MLX5_SET_MATCHER_HS_V)
gre_m = gre_v;
gre_crks_rsvd0_ver_m.value = rte_be_to_cpu_16(gre_m->c_rsvd0_ver);
gre_crks_rsvd0_ver_v.value = rte_be_to_cpu_16(gre_v->c_rsvd0_ver);
MLX5_SET(fte_match_set_misc, misc_v, gre_c_present,
gre_crks_rsvd0_ver_v.c_present &
gre_crks_rsvd0_ver_m.c_present);
MLX5_SET(fte_match_set_misc, misc_v, gre_k_present,
gre_crks_rsvd0_ver_v.k_present &
gre_crks_rsvd0_ver_m.k_present);
MLX5_SET(fte_match_set_misc, misc_v, gre_s_present,
gre_crks_rsvd0_ver_v.s_present &
gre_crks_rsvd0_ver_m.s_present);
protocol_m = rte_be_to_cpu_16(gre_m->protocol);
protocol_v = rte_be_to_cpu_16(gre_v->protocol);
if (!protocol_m) {
/* Force next protocol to prevent matchers duplication */
protocol_v = mlx5_translate_tunnel_etypes(pattern_flags);
if (protocol_v)
protocol_m = 0xFFFF;
/* Restore the value to mask in mask case. */
if (key_type & MLX5_SET_MATCHER_M)
protocol_v = protocol_m;
}
MLX5_SET(fte_match_set_misc, misc_v, gre_protocol,
protocol_m & protocol_v);
}
/**
* Add GRE optional items to the value.
*
* @param[in, out] key
* Flow matcher value.
* @param[in] item
* Flow pattern to translate.
* @param[in] gre_item
* Pointer to gre_item.
* @param[in] pattern_flags
* Accumulated pattern flags.
* @param[in] key_type
* Set flow matcher mask or value.
*/
static void
flow_dv_translate_item_gre_option(void *key,
const struct rte_flow_item *item,
const struct rte_flow_item *gre_item,
uint64_t pattern_flags, uint32_t key_type)
{
void *misc5_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters_5);
const struct rte_flow_item_gre_opt *option_m = item->mask;
const struct rte_flow_item_gre_opt *option_v = item->spec;
const struct rte_flow_item_gre *gre_m = gre_item->mask;
const struct rte_flow_item_gre *gre_v = gre_item->spec;
static const struct rte_flow_item_gre empty_gre = {0};
struct rte_flow_item gre_key_item;
uint16_t c_rsvd0_ver_m, c_rsvd0_ver_v;
uint16_t protocol_m, protocol_v;
/*
* If only match key field, keep using misc for matching.
* If need to match checksum or sequence, using misc5 and do
* not need using misc.
*/
if (!(option_m->sequence.sequence ||
option_m->checksum_rsvd.checksum)) {
flow_dv_translate_item_gre(key, gre_item, pattern_flags, key_type);
gre_key_item.spec = &option_v->key.key;
gre_key_item.mask = &option_m->key.key;
flow_dv_translate_item_gre_key(key, &gre_key_item, key_type);
return;
}
if (!gre_v) {
gre_v = &empty_gre;
gre_m = &empty_gre;
} else {
if (!gre_m)
gre_m = &rte_flow_item_gre_mask;
}
protocol_v = gre_v->protocol;
protocol_m = gre_m->protocol;
if (!protocol_m) {
/* Force next protocol to prevent matchers duplication */
uint16_t ether_type =
mlx5_translate_tunnel_etypes(pattern_flags);
if (ether_type) {
protocol_v = rte_be_to_cpu_16(ether_type);
protocol_m = UINT16_MAX;
}
}
c_rsvd0_ver_v = gre_v->c_rsvd0_ver;
c_rsvd0_ver_m = gre_m->c_rsvd0_ver;
if (option_m->sequence.sequence) {
c_rsvd0_ver_v |= RTE_BE16(0x1000);
c_rsvd0_ver_m |= RTE_BE16(0x1000);
}
if (option_m->key.key) {
c_rsvd0_ver_v |= RTE_BE16(0x2000);
c_rsvd0_ver_m |= RTE_BE16(0x2000);
}
if (option_m->checksum_rsvd.checksum) {
c_rsvd0_ver_v |= RTE_BE16(0x8000);
c_rsvd0_ver_m |= RTE_BE16(0x8000);
}
if (key_type & MLX5_SET_MATCHER_M) {
c_rsvd0_ver_v = c_rsvd0_ver_m;
protocol_v = protocol_m;
option_v = option_m;
}
/*
* Hardware parses GRE optional field into the fixed location,
* do not need to adjust the tunnel dword indices.
*/
MLX5_SET(fte_match_set_misc5, misc5_v, tunnel_header_0,
rte_be_to_cpu_32((c_rsvd0_ver_v | protocol_v << 16) &
(c_rsvd0_ver_m | protocol_m << 16)));
MLX5_SET(fte_match_set_misc5, misc5_v, tunnel_header_1,
rte_be_to_cpu_32(option_v->checksum_rsvd.checksum &
option_m->checksum_rsvd.checksum));
MLX5_SET(fte_match_set_misc5, misc5_v, tunnel_header_2,
rte_be_to_cpu_32(option_v->key.key & option_m->key.key));
MLX5_SET(fte_match_set_misc5, misc5_v, tunnel_header_3,
rte_be_to_cpu_32(option_v->sequence.sequence &
option_m->sequence.sequence));
}
/**
* Add NVGRE item to matcher and to the value.
*
* @param[in, out] key
* Flow matcher value.
* @param[in] item
* Flow pattern to translate.
* @param[in] pattern_flags
* Accumulated pattern flags.
* @param[in] key_type
* Set flow matcher mask or value.
*/
static void
flow_dv_translate_item_nvgre(void *key, const struct rte_flow_item *item,
unsigned long pattern_flags, uint32_t key_type)
{
const struct rte_flow_item_nvgre *nvgre_m;
const struct rte_flow_item_nvgre *nvgre_v;
void *misc_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters);
const char *tni_flow_id_m;
const char *tni_flow_id_v;
char *gre_key_v;
int size;
int i;
/* For NVGRE, GRE header fields must be set with defined values. */
const struct rte_flow_item_gre gre_spec = {
.c_rsvd0_ver = RTE_BE16(0x2000),
.protocol = RTE_BE16(RTE_ETHER_TYPE_TEB)
};
const struct rte_flow_item_gre gre_mask = {
.c_rsvd0_ver = RTE_BE16(0xB000),
.protocol = RTE_BE16(UINT16_MAX),
};
const struct rte_flow_item gre_item = {
.spec = &gre_spec,
.mask = &gre_mask,
.last = NULL,
};
flow_dv_translate_item_gre(key, &gre_item, pattern_flags, key_type);
if (MLX5_ITEM_VALID(item, key_type))
return;
MLX5_ITEM_UPDATE(item, key_type, nvgre_v, nvgre_m,
&rte_flow_item_nvgre_mask);
tni_flow_id_m = (const char *)nvgre_m->tni;
tni_flow_id_v = (const char *)nvgre_v->tni;
size = sizeof(nvgre_m->tni) + sizeof(nvgre_m->flow_id);
gre_key_v = MLX5_ADDR_OF(fte_match_set_misc, misc_v, gre_key_h);
for (i = 0; i < size; ++i)
gre_key_v[i] = tni_flow_id_m[i] & tni_flow_id_v[i];
}
/**
* Add VXLAN item to the value.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[in] attr
* Flow rule attributes.
* @param[in, out] key
* Flow matcher value.
* @param[in] item
* Flow pattern to translate.
* @param[in] inner
* Item is inner pattern.
* @param[in] wks
* Matcher workspace.
* @param[in] key_type
* Set flow matcher mask or value.
*/
static void
flow_dv_translate_item_vxlan(struct rte_eth_dev *dev,
const struct rte_flow_attr *attr,
void *key, const struct rte_flow_item *item,
int inner, struct mlx5_dv_matcher_workspace *wks,
uint32_t key_type)
{
const struct rte_flow_item_vxlan *vxlan_m;
const struct rte_flow_item_vxlan *vxlan_v;
const struct rte_flow_item_vxlan *vxlan_vv = item->spec;
void *headers_v;
void *misc_v;
void *misc5_v;
uint32_t tunnel_v;
uint32_t *tunnel_header_v;
char *vni_v;
uint16_t dport;
int size;
int i;
struct mlx5_priv *priv = dev->data->dev_private;
const struct rte_flow_item_vxlan nic_mask = {
.vni = "\xff\xff\xff",
.rsvd1 = 0xff,
};
misc5_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters_5);
headers_v = inner ? MLX5_ADDR_OF(fte_match_param, key, inner_headers) :
MLX5_ADDR_OF(fte_match_param, key, outer_headers);
dport = item->type == RTE_FLOW_ITEM_TYPE_VXLAN ?
MLX5_UDP_PORT_VXLAN : MLX5_UDP_PORT_VXLAN_GPE;
if (!MLX5_GET16(fte_match_set_lyr_2_4, headers_v, udp_dport)) {
if (key_type & MLX5_SET_MATCHER_M)
MLX5_SET(fte_match_set_lyr_2_4, headers_v,
udp_dport, 0xFFFF);
else
MLX5_SET(fte_match_set_lyr_2_4, headers_v,
udp_dport, dport);
}
/*
* Read the UDP dport to check if the value satisfies the VXLAN
* matching with MISC5 for CX5.
*/
if (wks->udp_dport)
dport = wks->udp_dport;
if (MLX5_ITEM_VALID(item, key_type))
return;
MLX5_ITEM_UPDATE(item, key_type, vxlan_v, vxlan_m, &nic_mask);
if ((item->mask == &nic_mask) &&
((!attr->group && !(attr->transfer && priv->fdb_def_rule) &&
!priv->sh->tunnel_header_0_1) ||
((attr->group || (attr->transfer && priv->fdb_def_rule)) &&
!priv->sh->misc5_cap)))
vxlan_m = &rte_flow_item_vxlan_mask;
if ((priv->sh->steering_format_version ==
MLX5_STEERING_LOGIC_FORMAT_CONNECTX_5 &&
dport != MLX5_UDP_PORT_VXLAN) ||
(!attr->group && !(attr->transfer && priv->fdb_def_rule)) ||
((attr->group || (attr->transfer && priv->fdb_def_rule)) &&
!priv->sh->misc5_cap)) {
misc_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters);
size = sizeof(vxlan_m->vni);
vni_v = MLX5_ADDR_OF(fte_match_set_misc, misc_v, vxlan_vni);
for (i = 0; i < size; ++i)
vni_v[i] = vxlan_m->vni[i] & vxlan_v->vni[i];
return;
}
tunnel_header_v = (uint32_t *)MLX5_ADDR_OF(fte_match_set_misc5,
misc5_v,
tunnel_header_1);
tunnel_v = (vxlan_v->vni[0] & vxlan_m->vni[0]) |
(vxlan_v->vni[1] & vxlan_m->vni[1]) << 8 |
(vxlan_v->vni[2] & vxlan_m->vni[2]) << 16;
*tunnel_header_v = tunnel_v;
if (key_type == MLX5_SET_MATCHER_SW_M) {
tunnel_v = (vxlan_vv->vni[0] & vxlan_m->vni[0]) |
(vxlan_vv->vni[1] & vxlan_m->vni[1]) << 8 |
(vxlan_vv->vni[2] & vxlan_m->vni[2]) << 16;
if (!tunnel_v)
*tunnel_header_v = 0x0;
if (vxlan_vv->rsvd1 & vxlan_m->rsvd1)
*tunnel_header_v |= vxlan_v->rsvd1 << 24;
} else {
*tunnel_header_v |= (vxlan_v->rsvd1 & vxlan_m->rsvd1) << 24;
}
}
/**
* Add VXLAN-GPE item to the value.
*
* @param[in, out] key
* Flow matcher value.
* @param[in] item
* Flow pattern to translate.
* @param[in] pattern_flags
* Item pattern flags.
* @param[in] key_type
* Set flow matcher mask or value.
*/
static void
flow_dv_translate_item_vxlan_gpe(void *key, const struct rte_flow_item *item,
const uint64_t pattern_flags,
uint32_t key_type)
{
static const struct rte_flow_item_vxlan_gpe dummy_vxlan_gpe_hdr = {0, };
const struct rte_flow_item_vxlan_gpe *vxlan_m = item->mask;
const struct rte_flow_item_vxlan_gpe *vxlan_v = item->spec;
/* The item was validated to be on the outer side */
void *headers_v = MLX5_ADDR_OF(fte_match_param, key, outer_headers);
void *misc_v =
MLX5_ADDR_OF(fte_match_param, key, misc_parameters_3);
char *vni_v =
MLX5_ADDR_OF(fte_match_set_misc3, misc_v, outer_vxlan_gpe_vni);
int i, size = sizeof(vxlan_m->vni);
uint8_t flags_m = 0xff;
uint8_t flags_v = 0xc;
uint8_t m_protocol, v_protocol;
if (!MLX5_GET16(fte_match_set_lyr_2_4, headers_v, udp_dport)) {
if (key_type & MLX5_SET_MATCHER_M)
MLX5_SET(fte_match_set_lyr_2_4, headers_v, udp_dport,
0xFFFF);
else
MLX5_SET(fte_match_set_lyr_2_4, headers_v, udp_dport,
MLX5_UDP_PORT_VXLAN_GPE);
}
if (!vxlan_v) {
vxlan_v = &dummy_vxlan_gpe_hdr;
vxlan_m = &dummy_vxlan_gpe_hdr;
} else {
if (!vxlan_m)
vxlan_m = &rte_flow_item_vxlan_gpe_mask;
}
if (key_type & MLX5_SET_MATCHER_M)
vxlan_v = vxlan_m;
else if (key_type == MLX5_SET_MATCHER_HS_V)
vxlan_m = vxlan_v;
for (i = 0; i < size; ++i)
vni_v[i] = vxlan_m->vni[i] & vxlan_v->vni[i];
if (vxlan_m->flags) {
flags_m = vxlan_m->flags;
flags_v = vxlan_v->flags;
}
MLX5_SET(fte_match_set_misc3, misc_v, outer_vxlan_gpe_flags,
flags_m & flags_v);
m_protocol = vxlan_m->protocol;
v_protocol = vxlan_v->protocol;
if (!m_protocol) {
/* Force next protocol to ensure next headers parsing. */
if (pattern_flags & MLX5_FLOW_LAYER_INNER_L2)
v_protocol = RTE_VXLAN_GPE_TYPE_ETH;
else if (pattern_flags & MLX5_FLOW_LAYER_INNER_L3_IPV4)
v_protocol = RTE_VXLAN_GPE_TYPE_IPV4;
else if (pattern_flags & MLX5_FLOW_LAYER_INNER_L3_IPV6)
v_protocol = RTE_VXLAN_GPE_TYPE_IPV6;
if (v_protocol)
m_protocol = 0xFF;
/* Restore the value to mask in mask case. */
if (key_type & MLX5_SET_MATCHER_M)
v_protocol = m_protocol;
}
MLX5_SET(fte_match_set_misc3, misc_v,
outer_vxlan_gpe_next_protocol, m_protocol & v_protocol);
}
/**
* Add Geneve item to the value.
*
* @param[in, out] key
* Flow matcher value.
* @param[in] item
* Flow pattern to translate.
* @param[in] pattern_flags
* Item pattern flags.
* @param[in] key_type
* Set flow matcher mask or value.
*/
static void
flow_dv_translate_item_geneve(void *key, const struct rte_flow_item *item,
uint64_t pattern_flags, uint32_t key_type)
{
static const struct rte_flow_item_geneve empty_geneve = {0,};
const struct rte_flow_item_geneve *geneve_m = item->mask;
const struct rte_flow_item_geneve *geneve_v = item->spec;
/* GENEVE flow item validation allows single tunnel item */
void *headers_v = MLX5_ADDR_OF(fte_match_param, key, outer_headers);
void *misc_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters);
uint16_t gbhdr_m;
uint16_t gbhdr_v;
char *vni_v = MLX5_ADDR_OF(fte_match_set_misc, misc_v, geneve_vni);
size_t size = sizeof(geneve_m->vni), i;
uint16_t protocol_m, protocol_v;
if (!MLX5_GET16(fte_match_set_lyr_2_4, headers_v, udp_dport)) {
if (key_type & MLX5_SET_MATCHER_M)
MLX5_SET(fte_match_set_lyr_2_4, headers_v, udp_dport,
0xFFFF);
else
MLX5_SET(fte_match_set_lyr_2_4, headers_v, udp_dport,
MLX5_UDP_PORT_GENEVE);
}
if (!geneve_v) {
geneve_v = &empty_geneve;
geneve_m = &empty_geneve;
} else {
if (!geneve_m)
geneve_m = &rte_flow_item_geneve_mask;
}
if (key_type & MLX5_SET_MATCHER_M)
geneve_v = geneve_m;
else if (key_type == MLX5_SET_MATCHER_HS_V)
geneve_m = geneve_v;
for (i = 0; i < size; ++i)
vni_v[i] = geneve_m->vni[i] & geneve_v->vni[i];
gbhdr_m = rte_be_to_cpu_16(geneve_m->ver_opt_len_o_c_rsvd0);
gbhdr_v = rte_be_to_cpu_16(geneve_v->ver_opt_len_o_c_rsvd0);
MLX5_SET(fte_match_set_misc, misc_v, geneve_oam,
MLX5_GENEVE_OAMF_VAL(gbhdr_v) & MLX5_GENEVE_OAMF_VAL(gbhdr_m));
MLX5_SET(fte_match_set_misc, misc_v, geneve_opt_len,
MLX5_GENEVE_OPTLEN_VAL(gbhdr_v) &
MLX5_GENEVE_OPTLEN_VAL(gbhdr_m));
protocol_m = rte_be_to_cpu_16(geneve_m->protocol);
protocol_v = rte_be_to_cpu_16(geneve_v->protocol);
if (!protocol_m) {
/* Force next protocol to prevent matchers duplication */
protocol_v = mlx5_translate_tunnel_etypes(pattern_flags);
if (protocol_v)
protocol_m = 0xFFFF;
/* Restore the value to mask in mask case. */
if (key_type & MLX5_SET_MATCHER_M)
protocol_v = protocol_m;
}
MLX5_SET(fte_match_set_misc, misc_v, geneve_protocol_type,
protocol_m & protocol_v);
}
/**
* Create Geneve TLV option resource.
*
* @param dev[in, out]
* Pointer to rte_eth_dev structure.
* @param[in] item
* Flow pattern to translate.
* @param[out] error
* pointer to error structure.
*
* @return
* 0 on success otherwise -errno and errno is set.
*/
int
flow_dev_geneve_tlv_option_resource_register(struct rte_eth_dev *dev,
const struct rte_flow_item *item,
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_dev_ctx_shared *sh = priv->sh;
struct mlx5_geneve_tlv_option_resource *geneve_opt_resource =
sh->geneve_tlv_option_resource;
struct mlx5_devx_obj *obj;
const struct rte_flow_item_geneve_opt *geneve_opt_v = item->spec;
int ret = 0;
if (!geneve_opt_v)
return -1;
rte_spinlock_lock(&sh->geneve_tlv_opt_sl);
if (geneve_opt_resource != NULL) {
if (geneve_opt_resource->option_class ==
geneve_opt_v->option_class &&
geneve_opt_resource->option_type ==
geneve_opt_v->option_type &&
geneve_opt_resource->length ==
geneve_opt_v->option_len) {
/* We already have GENEVE TLV option obj allocated. */
__atomic_fetch_add(&geneve_opt_resource->refcnt, 1,
__ATOMIC_RELAXED);
} else {
ret = rte_flow_error_set(error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"Only one GENEVE TLV option supported");
goto exit;
}
} else {
/* Create a GENEVE TLV object and resource. */
obj = mlx5_devx_cmd_create_geneve_tlv_option(sh->cdev->ctx,
geneve_opt_v->option_class,
geneve_opt_v->option_type,
geneve_opt_v->option_len);
if (!obj) {
ret = rte_flow_error_set(error, ENODATA,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"Failed to create GENEVE TLV Devx object");
goto exit;
}
sh->geneve_tlv_option_resource =
mlx5_malloc(MLX5_MEM_ZERO,
sizeof(*geneve_opt_resource),
0, SOCKET_ID_ANY);
if (!sh->geneve_tlv_option_resource) {
claim_zero(mlx5_devx_cmd_destroy(obj));
ret = rte_flow_error_set(error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"GENEVE TLV object memory allocation failed");
goto exit;
}
geneve_opt_resource = sh->geneve_tlv_option_resource;
geneve_opt_resource->obj = obj;
geneve_opt_resource->option_class = geneve_opt_v->option_class;
geneve_opt_resource->option_type = geneve_opt_v->option_type;
geneve_opt_resource->length = geneve_opt_v->option_len;
__atomic_store_n(&geneve_opt_resource->refcnt, 1,
__ATOMIC_RELAXED);
}
exit:
rte_spinlock_unlock(&sh->geneve_tlv_opt_sl);
return ret;
}
/**
* Add Geneve TLV option item to value.
*
* @param[in, out] dev
* Pointer to rte_eth_dev structure.
* @param[in, out] key
* Flow matcher value.
* @param[in] item
* Flow pattern to translate.
* @param[in] key_type
* Set flow matcher mask or value.
* @param[out] error
* Pointer to error structure.
*/
static int
flow_dv_translate_item_geneve_opt(struct rte_eth_dev *dev, void *key,
const struct rte_flow_item *item,
uint32_t key_type,
struct rte_flow_error *error)
{
const struct rte_flow_item_geneve_opt *geneve_opt_m;
const struct rte_flow_item_geneve_opt *geneve_opt_v;
const struct rte_flow_item_geneve_opt *geneve_opt_vv = item->spec;
void *misc_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters);
void *misc3_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters_3);
rte_be32_t opt_data_key = 0, opt_data_mask = 0;
uint32_t *data;
int ret = 0;
if (MLX5_ITEM_VALID(item, key_type))
return -1;
MLX5_ITEM_UPDATE(item, key_type, geneve_opt_v, geneve_opt_m,
&rte_flow_item_geneve_opt_mask);
ret = flow_dev_geneve_tlv_option_resource_register(dev, item,
error);
if (ret) {
DRV_LOG(ERR, "Failed to create geneve_tlv_obj");
return ret;
}
/*
* Set the option length in GENEVE header if not requested.
* The GENEVE TLV option length is expressed by the option length field
* in the GENEVE header.
* If the option length was not requested but the GENEVE TLV option item
* is present we set the option length field implicitly.
*/
if (!MLX5_GET16(fte_match_set_misc, misc_v, geneve_opt_len)) {
if (key_type & MLX5_SET_MATCHER_M)
MLX5_SET(fte_match_set_misc, misc_v, geneve_opt_len,
MLX5_GENEVE_OPTLEN_MASK);
else
MLX5_SET(fte_match_set_misc, misc_v, geneve_opt_len,
geneve_opt_v->option_len + 1);
}
/* Set the data. */
if (key_type == MLX5_SET_MATCHER_SW_V)
data = geneve_opt_vv->data;
else
data = geneve_opt_v->data;
if (data) {
memcpy(&opt_data_key, data,
RTE_MIN((uint32_t)(geneve_opt_v->option_len * 4),
sizeof(opt_data_key)));
MLX5_ASSERT((uint32_t)(geneve_opt_v->option_len * 4) <=
sizeof(opt_data_key));
memcpy(&opt_data_mask, geneve_opt_m->data,
RTE_MIN((uint32_t)(geneve_opt_v->option_len * 4),
sizeof(opt_data_mask)));
MLX5_ASSERT((uint32_t)(geneve_opt_v->option_len * 4) <=
sizeof(opt_data_mask));
MLX5_SET(fte_match_set_misc3, misc3_v,
geneve_tlv_option_0_data,
rte_be_to_cpu_32(opt_data_key & opt_data_mask));
}
return ret;
}
/**
* Add MPLS item to the value.
*
* @param[in, out] key
* Flow matcher value.
* @param[in] item
* Flow pattern to translate.
* @param[in] prev_layer
* The protocol layer indicated in previous item.
* @param[in] inner
* Item is inner pattern.
* @param[in] key_type
* Set flow matcher mask or value.
*/
static void
flow_dv_translate_item_mpls(void *key, const struct rte_flow_item *item,
uint64_t prev_layer, int inner,
uint32_t key_type)
{
const uint32_t *in_mpls_m;
const uint32_t *in_mpls_v;
uint32_t *out_mpls_v = 0;
void *misc_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters);
void *misc2_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters_2);
void *headers_v = MLX5_ADDR_OF(fte_match_param, key, outer_headers);
switch (prev_layer) {
case MLX5_FLOW_LAYER_OUTER_L4_UDP:
if (!MLX5_GET16(fte_match_set_lyr_2_4, headers_v, udp_dport)) {
if (key_type & MLX5_SET_MATCHER_M)
MLX5_SET(fte_match_set_lyr_2_4, headers_v,
udp_dport, 0xffff);
else
MLX5_SET(fte_match_set_lyr_2_4, headers_v,
udp_dport, MLX5_UDP_PORT_MPLS);
}
break;
case MLX5_FLOW_LAYER_GRE:
/* Fall-through. */
case MLX5_FLOW_LAYER_GRE_KEY:
if (!MLX5_GET16(fte_match_set_misc, misc_v, gre_protocol)) {
if (key_type & MLX5_SET_MATCHER_M)
MLX5_SET(fte_match_set_misc, misc_v,
gre_protocol, 0xffff);
else
MLX5_SET(fte_match_set_misc, misc_v,
gre_protocol, RTE_ETHER_TYPE_MPLS);
}
break;
default:
break;
}
if (MLX5_ITEM_VALID(item, key_type))
return;
MLX5_ITEM_UPDATE(item, key_type, in_mpls_v, in_mpls_m,
&rte_flow_item_mpls_mask);
switch (prev_layer) {
case MLX5_FLOW_LAYER_OUTER_L4_UDP:
out_mpls_v =
(uint32_t *)MLX5_ADDR_OF(fte_match_set_misc2, misc2_v,
outer_first_mpls_over_udp);
break;
case MLX5_FLOW_LAYER_GRE:
out_mpls_v =
(uint32_t *)MLX5_ADDR_OF(fte_match_set_misc2, misc2_v,
outer_first_mpls_over_gre);
break;
default:
/* Inner MPLS not over GRE is not supported. */
if (!inner)
out_mpls_v =
(uint32_t *)MLX5_ADDR_OF(fte_match_set_misc2,
misc2_v,
outer_first_mpls);
break;
}
if (out_mpls_v)
*out_mpls_v = *in_mpls_v & *in_mpls_m;
}
/**
* Add metadata register item to matcher
*
* @param[in, out] key
* Flow matcher value.
* @param[in] reg_type
* Type of device metadata register
* @param[in] value
* Register value
* @param[in] mask
* Register mask
*/
static void
flow_dv_match_meta_reg(void *key, enum modify_reg reg_type,
uint32_t data, uint32_t mask)
{
void *misc2_v =
MLX5_ADDR_OF(fte_match_param, key, misc_parameters_2);
uint32_t temp;
data &= mask;
switch (reg_type) {
case REG_A:
MLX5_SET(fte_match_set_misc2, misc2_v, metadata_reg_a, data);
break;
case REG_B:
MLX5_SET(fte_match_set_misc2, misc2_v, metadata_reg_b, data);
break;
case REG_C_0:
/*
* The metadata register C0 field might be divided into
* source vport index and META item value, we should set
* this field according to specified mask, not as whole one.
*/
temp = MLX5_GET(fte_match_set_misc2, misc2_v, metadata_reg_c_0);
if (mask)
temp &= ~mask;
temp |= data;
MLX5_SET(fte_match_set_misc2, misc2_v, metadata_reg_c_0, temp);
break;
case REG_C_1:
MLX5_SET(fte_match_set_misc2, misc2_v, metadata_reg_c_1, data);
break;
case REG_C_2:
MLX5_SET(fte_match_set_misc2, misc2_v, metadata_reg_c_2, data);
break;
case REG_C_3:
MLX5_SET(fte_match_set_misc2, misc2_v, metadata_reg_c_3, data);
break;
case REG_C_4:
MLX5_SET(fte_match_set_misc2, misc2_v, metadata_reg_c_4, data);
break;
case REG_C_5:
MLX5_SET(fte_match_set_misc2, misc2_v, metadata_reg_c_5, data);
break;
case REG_C_6:
MLX5_SET(fte_match_set_misc2, misc2_v, metadata_reg_c_6, data);
break;
case REG_C_7:
MLX5_SET(fte_match_set_misc2, misc2_v, metadata_reg_c_7, data);
break;
default:
MLX5_ASSERT(false);
break;
}
}
/**
* Add metadata register item to matcher
*
* @param[in, out] matcher
* Flow matcher.
* @param[in, out] key
* Flow matcher value.
* @param[in] reg_type
* Type of device metadata register
* @param[in] value
* Register value
* @param[in] mask
* Register mask
*/
static void
flow_dv_match_meta_reg_all(void *matcher, void *key, enum modify_reg reg_type,
uint32_t data, uint32_t mask)
{
flow_dv_match_meta_reg(key, reg_type, data, mask);
flow_dv_match_meta_reg(matcher, reg_type, mask, mask);
}
/**
* Add MARK item to matcher
*
* @param[in] dev
* The device to configure through.
* @param[in, out] key
* Flow matcher value.
* @param[in] item
* Flow pattern to translate.
* @param[in] key_type
* Set flow matcher mask or value.
*/
static void
flow_dv_translate_item_mark(struct rte_eth_dev *dev, void *key,
const struct rte_flow_item *item,
uint32_t key_type)
{
struct mlx5_priv *priv = dev->data->dev_private;
const struct rte_flow_item_mark *mark;
uint32_t value;
uint32_t mask = 0;
if (key_type & MLX5_SET_MATCHER_SW) {
mark = item->mask ? (const void *)item->mask :
&rte_flow_item_mark_mask;
mask = mark->id;
if (key_type == MLX5_SET_MATCHER_SW_M) {
value = mask;
} else {
mark = (const void *)item->spec;
MLX5_ASSERT(mark);
value = mark->id;
}
} else {
mark = (key_type == MLX5_SET_MATCHER_HS_V) ?
(const void *)item->spec : (const void *)item->mask;
MLX5_ASSERT(mark);
value = mark->id;
if (key_type == MLX5_SET_MATCHER_HS_M)
mask = value;
}
mask &= priv->sh->dv_mark_mask;
value &= mask;
if (mask) {
enum modify_reg reg;
/* Get the metadata register index for the mark. */
reg = mlx5_flow_get_reg_id(dev, MLX5_FLOW_MARK, 0, NULL);
MLX5_ASSERT(reg > 0);
if (reg == REG_C_0) {
struct mlx5_priv *priv = dev->data->dev_private;
uint32_t msk_c0 = priv->sh->dv_regc0_mask;
uint32_t shl_c0 = rte_bsf32(msk_c0);
mask &= msk_c0;
mask <<= shl_c0;
value <<= shl_c0;
}
flow_dv_match_meta_reg(key, reg, value, mask);
}
}
/**
* Add META item to matcher
*
* @param[in] dev
* The devich to configure through.
* @param[in, out] key
* Flow matcher value.
* @param[in] attr
* Attributes of flow that includes this item.
* @param[in] item
* Flow pattern to translate.
* @param[in] key_type
* Set flow matcher mask or value.
*/
static void
flow_dv_translate_item_meta(struct rte_eth_dev *dev,
void *key,
const struct rte_flow_attr *attr,
const struct rte_flow_item *item,
uint32_t key_type)
{
const struct rte_flow_item_meta *meta_m;
const struct rte_flow_item_meta *meta_v;
uint32_t value;
uint32_t mask = 0;
int reg;
if (MLX5_ITEM_VALID(item, key_type))
return;
MLX5_ITEM_UPDATE(item, key_type, meta_v, meta_m,
&rte_flow_item_meta_mask);
value = meta_v->data;
mask = meta_m->data;
if (key_type == MLX5_SET_MATCHER_HS_M)
mask = value;
/*
* In the current implementation, REG_B cannot be used to match.
* Force to use REG_C_1 in HWS root table as other tables.
* This map may change.
* NIC: modify - REG_B to be present in SW
* match - REG_C_1 when copied from FDB, different from SWS
* FDB: modify - REG_C_1 in Xmeta mode, REG_NON in legacy mode
* match - REG_C_1 in FDB
*/
if (!!(key_type & MLX5_SET_MATCHER_SW))
reg = flow_dv_get_metadata_reg(dev, attr, NULL);
else
reg = flow_hw_get_reg_id(RTE_FLOW_ITEM_TYPE_META, 0);
if (reg < 0)
return;
MLX5_ASSERT(reg != REG_NON);
if (reg == REG_C_0) {
struct mlx5_priv *priv = dev->data->dev_private;
uint32_t msk_c0 = priv->sh->dv_regc0_mask;
uint32_t shl_c0 = rte_bsf32(msk_c0);
mask &= msk_c0;
mask <<= shl_c0;
value <<= shl_c0;
}
flow_dv_match_meta_reg(key, reg, value, mask);
}
/**
* Add vport metadata Reg C0 item to matcher
*
* @param[in, out] key
* Flow matcher value.
* @param[in] value
* Register value
* @param[in] mask
* Register mask
*/
static void
flow_dv_translate_item_meta_vport(void *key, uint32_t value, uint32_t mask)
{
flow_dv_match_meta_reg(key, REG_C_0, value, mask);
}
/**
* Add tag item to matcher
*
* @param[in] dev
* The devich to configure through.
* @param[in, out] key
* Flow matcher value.
* @param[in] item
* Flow pattern to translate.
* @param[in] key_type
* Set flow matcher mask or value.
*/
static void
flow_dv_translate_mlx5_item_tag(struct rte_eth_dev *dev, void *key,
const struct rte_flow_item *item,
uint32_t key_type)
{
const struct mlx5_rte_flow_item_tag *tag_v = item->spec;
const struct mlx5_rte_flow_item_tag *tag_m = item->mask;
uint32_t mask, value;
MLX5_ASSERT(tag_v);
value = tag_v->data;
mask = tag_m ? tag_m->data : UINT32_MAX;
if (key_type & MLX5_SET_MATCHER_M)
value = mask;
if (tag_v->id == REG_C_0) {
struct mlx5_priv *priv = dev->data->dev_private;
uint32_t msk_c0 = priv->sh->dv_regc0_mask;
uint32_t shl_c0 = rte_bsf32(msk_c0);
mask &= msk_c0;
mask <<= shl_c0;
value <<= shl_c0;
}
flow_dv_match_meta_reg(key, tag_v->id, value, mask);
}
/**
* Add TAG item to matcher
*
* @param[in] dev
* The devich to configure through.
* @param[in, out] key
* Flow matcher value.
* @param[in] item
* Flow pattern to translate.
* @param[in] key_type
* Set flow matcher mask or value.
*/
static void
flow_dv_translate_item_tag(struct rte_eth_dev *dev, void *key,
const struct rte_flow_item *item,
uint32_t key_type)
{
const struct rte_flow_item_tag *tag_vv = item->spec;
const struct rte_flow_item_tag *tag_v;
const struct rte_flow_item_tag *tag_m;
enum modify_reg reg;
uint32_t index;
if (MLX5_ITEM_VALID(item, key_type))
return;
MLX5_ITEM_UPDATE(item, key_type, tag_v, tag_m,
&rte_flow_item_tag_mask);
/* When set mask, the index should be from spec. */
index = tag_vv ? tag_vv->index : tag_v->index;
/* Get the metadata register index for the tag. */
if (!!(key_type & MLX5_SET_MATCHER_SW))
reg = mlx5_flow_get_reg_id(dev, MLX5_APP_TAG, index, NULL);
else
reg = flow_hw_get_reg_id(RTE_FLOW_ITEM_TYPE_TAG, index);
MLX5_ASSERT(reg > 0);
flow_dv_match_meta_reg(key, reg, tag_v->data, tag_m->data);
}
/**
* Add source vport match to the specified matcher.
*
* @param[in, out] key
* Flow matcher value.
* @param[in] port
* Source vport value to match
*/
static void
flow_dv_translate_item_source_vport(void *key,
int16_t port)
{
void *misc_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters);
MLX5_SET(fte_match_set_misc, misc_v, source_port, port);
}
/**
* Translate port-id item to eswitch match on port-id.
*
* @param[in] dev
* The devich to configure through.
* @param[in, out] key
* Flow matcher value.
* @param[in] item
* Flow pattern to translate.
* @param[in] attr
* Flow attributes.
* @param[in] key_type
* Set flow matcher mask or value.
*
* @return
* 0 on success, a negative errno value otherwise.
*/
static int
flow_dv_translate_item_port_id(struct rte_eth_dev *dev, void *key,
const struct rte_flow_item *item,
const struct rte_flow_attr *attr,
uint32_t key_type)
{
const struct rte_flow_item_port_id *pid_m = item ? item->mask : NULL;
const struct rte_flow_item_port_id *pid_v = item ? item->spec : NULL;
struct mlx5_priv *priv;
uint16_t mask, id;
uint32_t vport_meta;
if (pid_v && pid_v->id == MLX5_PORT_ESW_MGR) {
flow_dv_translate_item_source_vport(key,
key_type & MLX5_SET_MATCHER_V ?
mlx5_flow_get_esw_manager_vport_id(dev) : 0xffff);
return 0;
}
mask = pid_m ? pid_m->id : 0xffff;
id = pid_v ? pid_v->id : dev->data->port_id;
priv = mlx5_port_to_eswitch_info(id, item == NULL);
if (!priv)
return -rte_errno;
if (key_type & MLX5_SET_MATCHER_M) {
id = mask;
vport_meta = priv->vport_meta_mask;
} else {
id = priv->vport_id;
vport_meta = priv->vport_meta_tag;
}
/*
* Translate to vport field or to metadata, depending on mode.
* Kernel can use either misc.source_port or half of C0 metadata
* register.
*/
if (priv->vport_meta_mask) {
/*
* Provide the hint for SW steering library
* to insert the flow into ingress domain and
* save the extra vport match.
*/
if (mask == 0xffff && priv->vport_id == 0xffff &&
priv->pf_bond < 0 && attr->transfer)
flow_dv_translate_item_source_vport(key, id);
/*
* We should always set the vport metadata register,
* otherwise the SW steering library can drop
* the rule if wire vport metadata value is not zero,
* it depends on kernel configuration.
*/
flow_dv_translate_item_meta_vport
(key, vport_meta, priv->vport_meta_mask);
} else {
flow_dv_translate_item_source_vport(key, id);
}
return 0;
}
/**
* Translate port representor item to eswitch match on port id.
*
* @param[in] dev
* The devich to configure through.
* @param[in, out] key
* Flow matcher value.
* @param[in] key_type
* Set flow matcher mask or value.
*
* @return
* 0 on success, a negative errno value otherwise.
*/
static int
flow_dv_translate_item_port_representor(struct rte_eth_dev *dev, void *key,
uint32_t key_type)
{
flow_dv_translate_item_source_vport(key,
key_type & MLX5_SET_MATCHER_V ?
mlx5_flow_get_esw_manager_vport_id(dev) : 0xffff);
return 0;
}
/**
* Translate represented port item to eswitch match on port id.
*
* @param[in] dev
* The devich to configure through.
* @param[in, out] key
* Flow matcher value.
* @param[in] item
* Flow pattern to translate.
* @param[in]
* Flow attributes.
*
* @return
* 0 on success, a negative errno value otherwise.
*/
static int
flow_dv_translate_item_represented_port(struct rte_eth_dev *dev, void *key,
const struct rte_flow_item *item,
const struct rte_flow_attr *attr,
uint32_t key_type)
{
const struct rte_flow_item_ethdev *pid_m = item ? item->mask : NULL;
const struct rte_flow_item_ethdev *pid_v = item ? item->spec : NULL;
struct mlx5_flow_workspace *wks = mlx5_flow_get_thread_workspace();
struct mlx5_priv *priv;
uint16_t mask, id;
uint32_t vport_meta;
MLX5_ASSERT(wks);
if (!pid_m && !pid_v)
return 0;
if (pid_v && pid_v->port_id == UINT16_MAX) {
flow_dv_translate_item_source_vport(key,
key_type & MLX5_SET_MATCHER_V ?
mlx5_flow_get_esw_manager_vport_id(dev) : 0xffff);
return 0;
}
mask = pid_m ? pid_m->port_id : UINT16_MAX;
id = pid_v ? pid_v->port_id : dev->data->port_id;
priv = mlx5_port_to_eswitch_info(id, item == NULL);
if (!priv)
return -rte_errno;
if (key_type & MLX5_SET_MATCHER_M) {
id = mask;
vport_meta = priv->vport_meta_mask;
} else {
id = priv->vport_id;
vport_meta = priv->vport_meta_tag;
wks->vport_meta_tag = vport_meta;
}
/*
* Translate to vport field or to metadata, depending on mode.
* Kernel can use either misc.source_port or half of C0 metadata
* register.
*/
if (priv->vport_meta_mask) {
/*
* Provide the hint for SW steering library
* to insert the flow into ingress domain and
* save the extra vport match.
*/
if (mask == UINT16_MAX && priv->vport_id == UINT16_MAX &&
priv->pf_bond < 0 && attr->transfer &&
priv->sh->config.dv_flow_en != 2)
flow_dv_translate_item_source_vport(key, id);
/*
* We should always set the vport metadata register,
* otherwise the SW steering library can drop
* the rule if wire vport metadata value is not zero,
* it depends on kernel configuration.
*/
flow_dv_translate_item_meta_vport(key, vport_meta,
priv->vport_meta_mask);
} else {
flow_dv_translate_item_source_vport(key, id);
}
return 0;
}
/**
* Translate port-id item to eswitch match on port-id.
*
* @param[in] dev
* The devich to configure through.
* @param[in, out] matcher
* Flow matcher.
* @param[in, out] key
* Flow matcher value.
* @param[in] item
* Flow pattern to translate.
* @param[in] attr
* Flow attributes.
*
* @return
* 0 on success, a negative errno value otherwise.
*/
static int
flow_dv_translate_item_port_id_all(struct rte_eth_dev *dev,
void *matcher, void *key,
const struct rte_flow_item *item,
const struct rte_flow_attr *attr)
{
int ret;
ret = flow_dv_translate_item_port_id
(dev, matcher, item, attr, MLX5_SET_MATCHER_SW_M);
if (ret)
return ret;
ret = flow_dv_translate_item_port_id
(dev, key, item, attr, MLX5_SET_MATCHER_SW_V);
return ret;
}
/**
* Add ICMP6 item to the value.
*
* @param[in, out] key
* Flow matcher value.
* @param[in] item
* Flow pattern to translate.
* @param[in] inner
* Item is inner pattern.
* @param[in] key_type
* Set flow matcher mask or value.
*/
static void
flow_dv_translate_item_icmp6(void *key, const struct rte_flow_item *item,
int inner, uint32_t key_type)
{
const struct rte_flow_item_icmp6 *icmp6_m;
const struct rte_flow_item_icmp6 *icmp6_v;
void *headers_v;
void *misc3_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters_3);
headers_v = inner ? MLX5_ADDR_OF(fte_match_param, key, inner_headers) :
MLX5_ADDR_OF(fte_match_param, key, outer_headers);
if (key_type & MLX5_SET_MATCHER_M)
MLX5_SET(fte_match_set_lyr_2_4, headers_v, ip_protocol, 0xFF);
else
MLX5_SET(fte_match_set_lyr_2_4, headers_v, ip_protocol,
IPPROTO_ICMPV6);
if (MLX5_ITEM_VALID(item, key_type))
return;
MLX5_ITEM_UPDATE(item, key_type, icmp6_v, icmp6_m,
&rte_flow_item_icmp6_mask);
MLX5_SET(fte_match_set_misc3, misc3_v, icmpv6_type,
icmp6_v->type & icmp6_m->type);
MLX5_SET(fte_match_set_misc3, misc3_v, icmpv6_code,
icmp6_v->code & icmp6_m->code);
}
/**
* Add ICMP item to the value.
*
* @param[in, out] key
* Flow matcher value.
* @param[in] item
* Flow pattern to translate.
* @param[in] inner
* Item is inner pattern.
* @param[in] key_type
* Set flow matcher mask or value.
*/
static void
flow_dv_translate_item_icmp(void *key, const struct rte_flow_item *item,
int inner, uint32_t key_type)
{
const struct rte_flow_item_icmp *icmp_m;
const struct rte_flow_item_icmp *icmp_v;
uint32_t icmp_header_data_m = 0;
uint32_t icmp_header_data_v = 0;
void *headers_v;
void *misc3_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters_3);
headers_v = inner ? MLX5_ADDR_OF(fte_match_param, key, inner_headers) :
MLX5_ADDR_OF(fte_match_param, key, outer_headers);
if (key_type & MLX5_SET_MATCHER_M)
MLX5_SET(fte_match_set_lyr_2_4, headers_v,
ip_protocol, 0xFF);
else
MLX5_SET(fte_match_set_lyr_2_4, headers_v,
ip_protocol, IPPROTO_ICMP);
if (MLX5_ITEM_VALID(item, key_type))
return;
MLX5_ITEM_UPDATE(item, key_type, icmp_v, icmp_m,
&rte_flow_item_icmp_mask);
MLX5_SET(fte_match_set_misc3, misc3_v, icmp_type,
icmp_v->hdr.icmp_type & icmp_m->hdr.icmp_type);
MLX5_SET(fte_match_set_misc3, misc3_v, icmp_code,
icmp_v->hdr.icmp_code & icmp_m->hdr.icmp_code);
icmp_header_data_m = rte_be_to_cpu_16(icmp_m->hdr.icmp_seq_nb);
icmp_header_data_m |= rte_be_to_cpu_16(icmp_m->hdr.icmp_ident) << 16;
if (icmp_header_data_m) {
icmp_header_data_v = rte_be_to_cpu_16(icmp_v->hdr.icmp_seq_nb);
icmp_header_data_v |=
rte_be_to_cpu_16(icmp_v->hdr.icmp_ident) << 16;
MLX5_SET(fte_match_set_misc3, misc3_v, icmp_header_data,
icmp_header_data_v & icmp_header_data_m);
}
}
/**
* Add GTP item to the value.
*
* @param[in, out] key
* Flow matcher value.
* @param[in] item
* Flow pattern to translate.
* @param[in] inner
* Item is inner pattern.
* @param[in] key_type
* Set flow matcher mask or value.
*/
static void
flow_dv_translate_item_gtp(void *key, const struct rte_flow_item *item,
int inner, uint32_t key_type)
{
const struct rte_flow_item_gtp *gtp_m;
const struct rte_flow_item_gtp *gtp_v;
void *headers_v;
void *misc3_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters_3);
uint16_t dport = RTE_GTPU_UDP_PORT;
headers_v = inner ? MLX5_ADDR_OF(fte_match_param, key, inner_headers) :
MLX5_ADDR_OF(fte_match_param, key, outer_headers);
if (!MLX5_GET16(fte_match_set_lyr_2_4, headers_v, udp_dport)) {
if (key_type & MLX5_SET_MATCHER_M)
MLX5_SET(fte_match_set_lyr_2_4, headers_v,
udp_dport, 0xFFFF);
else
MLX5_SET(fte_match_set_lyr_2_4, headers_v,
udp_dport, dport);
}
if (MLX5_ITEM_VALID(item, key_type))
return;
MLX5_ITEM_UPDATE(item, key_type, gtp_v, gtp_m,
&rte_flow_item_gtp_mask);
MLX5_SET(fte_match_set_misc3, misc3_v, gtpu_msg_flags,
gtp_v->v_pt_rsv_flags & gtp_m->v_pt_rsv_flags);
MLX5_SET(fte_match_set_misc3, misc3_v, gtpu_msg_type,
gtp_v->msg_type & gtp_m->msg_type);
MLX5_SET(fte_match_set_misc3, misc3_v, gtpu_teid,
rte_be_to_cpu_32(gtp_v->teid & gtp_m->teid));
}
/**
* Add GTP PSC item to matcher.
*
* @param[in, out] key
* Flow matcher value.
* @param[in] item
* Flow pattern to translate.
* @param[in] key_type
* Set flow matcher mask or value.
*/
static int
flow_dv_translate_item_gtp_psc(void *key, const struct rte_flow_item *item,
uint32_t key_type)
{
const struct rte_flow_item_gtp_psc *gtp_psc_m;
const struct rte_flow_item_gtp_psc *gtp_psc_v;
void *misc3_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters_3);
union {
uint32_t w32;
struct {
uint16_t seq_num;
uint8_t npdu_num;
uint8_t next_ext_header_type;
};
} dw_2;
union {
uint32_t w32;
struct {
uint8_t len;
uint8_t type_flags;
uint8_t qfi;
uint8_t reserved;
};
} dw_0;
uint8_t gtp_flags;
/* Always set E-flag match on one, regardless of GTP item settings. */
gtp_flags = MLX5_GET(fte_match_set_misc3, misc3_v, gtpu_msg_flags);
gtp_flags |= MLX5_GTP_EXT_HEADER_FLAG;
MLX5_SET(fte_match_set_misc3, misc3_v, gtpu_msg_flags, gtp_flags);
/*Set next extension header type. */
dw_2.seq_num = 0;
dw_2.npdu_num = 0;
if (key_type & MLX5_SET_MATCHER_M)
dw_2.next_ext_header_type = 0xff;
else
dw_2.next_ext_header_type = 0x85;
MLX5_SET(fte_match_set_misc3, misc3_v, gtpu_dw_2,
rte_cpu_to_be_32(dw_2.w32));
if (MLX5_ITEM_VALID(item, key_type))
return 0;
MLX5_ITEM_UPDATE(item, key_type, gtp_psc_v,
gtp_psc_m, &rte_flow_item_gtp_psc_mask);
dw_0.w32 = 0;
dw_0.type_flags = MLX5_GTP_PDU_TYPE_SHIFT(gtp_psc_v->hdr.type &
gtp_psc_m->hdr.type);
dw_0.qfi = gtp_psc_v->hdr.qfi & gtp_psc_m->hdr.qfi;
MLX5_SET(fte_match_set_misc3, misc3_v, gtpu_first_ext_dw_0,
rte_cpu_to_be_32(dw_0.w32));
return 0;
}
/**
* Add eCPRI item to matcher and to the value.
*
* @param[in] dev
* The devich to configure through.
* @param[in, out] key
* Flow matcher value.
* @param[in] item
* Flow pattern to translate.
* @param[in] last_item
* Last item flags.
* @param[in] key_type
* Set flow matcher mask or value.
*/
static void
flow_dv_translate_item_ecpri(struct rte_eth_dev *dev, void *key,
const struct rte_flow_item *item,
uint64_t last_item, uint32_t key_type)
{
struct mlx5_priv *priv = dev->data->dev_private;
const struct rte_flow_item_ecpri *ecpri_m;
const struct rte_flow_item_ecpri *ecpri_v;
const struct rte_flow_item_ecpri *ecpri_vv = item->spec;
struct rte_ecpri_common_hdr common;
void *misc4_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters_4);
uint32_t *samples;
void *dw_v;
/*
* In case of eCPRI over Ethernet, if EtherType is not specified,
* match on eCPRI EtherType implicitly.
*/
if (last_item & MLX5_FLOW_LAYER_OUTER_L2) {
void *hdrs_v, *l2v;
hdrs_v = MLX5_ADDR_OF(fte_match_param, key, outer_headers);
l2v = MLX5_ADDR_OF(fte_match_set_lyr_2_4, hdrs_v, ethertype);
if (*(uint16_t *)l2v == 0) {
if (key_type & MLX5_SET_MATCHER_M)
*(uint16_t *)l2v = UINT16_MAX;
else
*(uint16_t *)l2v =
RTE_BE16(RTE_ETHER_TYPE_ECPRI);
}
}
if (MLX5_ITEM_VALID(item, key_type))
return;
MLX5_ITEM_UPDATE(item, key_type, ecpri_v, ecpri_m,
&rte_flow_item_ecpri_mask);
/*
* Maximal four DW samples are supported in a single matching now.
* Two are used now for a eCPRI matching:
* 1. Type: one byte, mask should be 0x00ff0000 in network order
* 2. ID of a message: one or two bytes, mask 0xffff0000 or 0xff000000
* if any.
*/
if (!ecpri_m->hdr.common.u32)
return;
samples = priv->sh->ecpri_parser.ids;
/* Need to take the whole DW as the mask to fill the entry. */
dw_v = MLX5_ADDR_OF(fte_match_set_misc4, misc4_v,
prog_sample_field_value_0);
/* Already big endian (network order) in the header. */
*(uint32_t *)dw_v = ecpri_v->hdr.common.u32 & ecpri_m->hdr.common.u32;
/* Sample#0, used for matching type, offset 0. */
/* It makes no sense to set the sample ID in the mask field. */
MLX5_SET(fte_match_set_misc4, misc4_v,
prog_sample_field_id_0, samples[0]);
/*
* Checking if message body part needs to be matched.
* Some wildcard rules only matching type field should be supported.
*/
if (ecpri_m->hdr.dummy[0]) {
if (key_type == MLX5_SET_MATCHER_SW_M)
common.u32 = rte_be_to_cpu_32(ecpri_vv->hdr.common.u32);
else
common.u32 = rte_be_to_cpu_32(ecpri_v->hdr.common.u32);
switch (common.type) {
case RTE_ECPRI_MSG_TYPE_IQ_DATA:
case RTE_ECPRI_MSG_TYPE_RTC_CTRL:
case RTE_ECPRI_MSG_TYPE_DLY_MSR:
dw_v = MLX5_ADDR_OF(fte_match_set_misc4, misc4_v,
prog_sample_field_value_1);
*(uint32_t *)dw_v = ecpri_v->hdr.dummy[0] &
ecpri_m->hdr.dummy[0];
/* Sample#1, to match message body, offset 4. */
MLX5_SET(fte_match_set_misc4, misc4_v,
prog_sample_field_id_1, samples[1]);
break;
default:
/* Others, do not match any sample ID. */
break;
}
}
}
/*
* Add connection tracking status item to matcher
*
* @param[in] dev
* The devich to configure through.
* @param[in, out] matcher
* Flow matcher.
* @param[in, out] key
* Flow matcher value.
* @param[in] item
* Flow pattern to translate.
*/
static void
flow_dv_translate_item_aso_ct(struct rte_eth_dev *dev,
void *matcher, void *key,
const struct rte_flow_item *item)
{
uint32_t reg_value = 0;
int reg_id;
/* 8LSB 0b 11/0000/11, middle 4 bits are reserved. */
uint32_t reg_mask = 0;
const struct rte_flow_item_conntrack *spec = item->spec;
const struct rte_flow_item_conntrack *mask = item->mask;
uint32_t flags;
struct rte_flow_error error;
if (!mask)
mask = &rte_flow_item_conntrack_mask;
if (!spec || !mask->flags)
return;
flags = spec->flags & mask->flags;
/* The conflict should be checked in the validation. */
if (flags & RTE_FLOW_CONNTRACK_PKT_STATE_VALID)
reg_value |= MLX5_CT_SYNDROME_VALID;
if (flags & RTE_FLOW_CONNTRACK_PKT_STATE_CHANGED)
reg_value |= MLX5_CT_SYNDROME_STATE_CHANGE;
if (flags & RTE_FLOW_CONNTRACK_PKT_STATE_INVALID)
reg_value |= MLX5_CT_SYNDROME_INVALID;
if (flags & RTE_FLOW_CONNTRACK_PKT_STATE_DISABLED)
reg_value |= MLX5_CT_SYNDROME_TRAP;
if (flags & RTE_FLOW_CONNTRACK_PKT_STATE_BAD)
reg_value |= MLX5_CT_SYNDROME_BAD_PACKET;
if (mask->flags & (RTE_FLOW_CONNTRACK_PKT_STATE_VALID |
RTE_FLOW_CONNTRACK_PKT_STATE_INVALID |
RTE_FLOW_CONNTRACK_PKT_STATE_DISABLED))
reg_mask |= 0xc0;
if (mask->flags & RTE_FLOW_CONNTRACK_PKT_STATE_CHANGED)
reg_mask |= MLX5_CT_SYNDROME_STATE_CHANGE;
if (mask->flags & RTE_FLOW_CONNTRACK_PKT_STATE_BAD)
reg_mask |= MLX5_CT_SYNDROME_BAD_PACKET;
/* The REG_C_x value could be saved during startup. */
reg_id = mlx5_flow_get_reg_id(dev, MLX5_ASO_CONNTRACK, 0, &error);
if (reg_id == REG_NON)
return;
flow_dv_match_meta_reg_all(matcher, key, (enum modify_reg)reg_id,
reg_value, reg_mask);
}
static void
flow_dv_translate_item_flex(struct rte_eth_dev *dev, void *matcher, void *key,
const struct rte_flow_item *item,
struct mlx5_flow *dev_flow, bool is_inner)
{
const struct rte_flow_item_flex *spec =
(const struct rte_flow_item_flex *)item->spec;
int index = mlx5_flex_acquire_index(dev, spec->handle, false);
MLX5_ASSERT(index >= 0 && index <= (int)(sizeof(uint32_t) * CHAR_BIT));
if (index < 0)
return;
if (!(dev_flow->handle->flex_item & RTE_BIT32(index))) {
/* Don't count both inner and outer flex items in one rule. */
if (mlx5_flex_acquire_index(dev, spec->handle, true) != index)
MLX5_ASSERT(false);
dev_flow->handle->flex_item |= (uint8_t)RTE_BIT32(index);
}
mlx5_flex_flow_translate_item(dev, matcher, key, item, is_inner);
}
/**
* Add METER_COLOR item to matcher
*
* @param[in] dev
* The device to configure through.
* @param[in, out] key
* Flow matcher value.
* @param[in] item
* Flow pattern to translate.
* @param[in] key_type
* Set flow matcher mask or value.
*/
static void
flow_dv_translate_item_meter_color(struct rte_eth_dev *dev, void *key,
const struct rte_flow_item *item,
uint32_t key_type)
{
const struct rte_flow_item_meter_color *color_m = item->mask;
const struct rte_flow_item_meter_color *color_v = item->spec;
uint32_t value, mask;
int reg = REG_NON;
MLX5_ASSERT(color_v);
if (MLX5_ITEM_VALID(item, key_type))
return;
MLX5_ITEM_UPDATE(item, key_type, color_v, color_m,
&rte_flow_item_meter_color_mask);
value = rte_col_2_mlx5_col(color_v->color);
mask = color_m ?
color_m->color : (UINT32_C(1) << MLX5_MTR_COLOR_BITS) - 1;
if (!!(key_type & MLX5_SET_MATCHER_SW))
reg = mlx5_flow_get_reg_id(dev, MLX5_MTR_COLOR, 0, NULL);
else
reg = flow_hw_get_reg_id(RTE_FLOW_ITEM_TYPE_METER_COLOR, 0);
if (reg == REG_NON)
return;
flow_dv_match_meta_reg(key, (enum modify_reg)reg, value, mask);
}
static uint32_t matcher_zero[MLX5_ST_SZ_DW(fte_match_param)] = { 0 };
#define HEADER_IS_ZERO(match_criteria, headers) \
!(memcmp(MLX5_ADDR_OF(fte_match_param, match_criteria, headers), \
matcher_zero, MLX5_FLD_SZ_BYTES(fte_match_param, headers))) \
/**
* Calculate flow matcher enable bitmap.
*
* @param match_criteria
* Pointer to flow matcher criteria.
*
* @return
* Bitmap of enabled fields.
*/
static uint8_t
flow_dv_matcher_enable(uint32_t *match_criteria)
{
uint8_t match_criteria_enable;
match_criteria_enable =
(!HEADER_IS_ZERO(match_criteria, outer_headers)) <<
MLX5_MATCH_CRITERIA_ENABLE_OUTER_BIT;
match_criteria_enable |=
(!HEADER_IS_ZERO(match_criteria, misc_parameters)) <<
MLX5_MATCH_CRITERIA_ENABLE_MISC_BIT;
match_criteria_enable |=
(!HEADER_IS_ZERO(match_criteria, inner_headers)) <<
MLX5_MATCH_CRITERIA_ENABLE_INNER_BIT;
match_criteria_enable |=
(!HEADER_IS_ZERO(match_criteria, misc_parameters_2)) <<
MLX5_MATCH_CRITERIA_ENABLE_MISC2_BIT;
match_criteria_enable |=
(!HEADER_IS_ZERO(match_criteria, misc_parameters_3)) <<
MLX5_MATCH_CRITERIA_ENABLE_MISC3_BIT;
match_criteria_enable |=
(!HEADER_IS_ZERO(match_criteria, misc_parameters_4)) <<
MLX5_MATCH_CRITERIA_ENABLE_MISC4_BIT;
match_criteria_enable |=
(!HEADER_IS_ZERO(match_criteria, misc_parameters_5)) <<
MLX5_MATCH_CRITERIA_ENABLE_MISC5_BIT;
return match_criteria_enable;
}
static void
__flow_dv_adjust_buf_size(size_t *size, uint8_t match_criteria)
{
/*
* Check flow matching criteria first, subtract misc5/4 length if flow
* doesn't own misc5/4 parameters. In some old rdma-core releases,
* misc5/4 are not supported, and matcher creation failure is expected
* w/o subtraction. If misc5 is provided, misc4 must be counted in since
* misc5 is right after misc4.
*/
if (!(match_criteria & (1 << MLX5_MATCH_CRITERIA_ENABLE_MISC5_BIT))) {
*size = MLX5_ST_SZ_BYTES(fte_match_param) -
MLX5_ST_SZ_BYTES(fte_match_set_misc5);
if (!(match_criteria & (1 <<
MLX5_MATCH_CRITERIA_ENABLE_MISC4_BIT))) {
*size -= MLX5_ST_SZ_BYTES(fte_match_set_misc4);
}
}
}
static struct mlx5_list_entry *
flow_dv_matcher_clone_cb(void *tool_ctx __rte_unused,
struct mlx5_list_entry *entry, void *cb_ctx)
{
struct mlx5_flow_cb_ctx *ctx = cb_ctx;
struct mlx5_flow_dv_matcher *ref = ctx->data;
struct mlx5_flow_tbl_data_entry *tbl = container_of(ref->tbl,
typeof(*tbl), tbl);
struct mlx5_flow_dv_matcher *resource = mlx5_malloc(MLX5_MEM_ANY,
sizeof(*resource),
0, SOCKET_ID_ANY);
if (!resource) {
rte_flow_error_set(ctx->error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"cannot create matcher");
return NULL;
}
memcpy(resource, entry, sizeof(*resource));
resource->tbl = &tbl->tbl;
return &resource->entry;
}
static void
flow_dv_matcher_clone_free_cb(void *tool_ctx __rte_unused,
struct mlx5_list_entry *entry)
{
mlx5_free(entry);
}
struct mlx5_list_entry *
flow_dv_tbl_create_cb(void *tool_ctx, void *cb_ctx)
{
struct mlx5_dev_ctx_shared *sh = tool_ctx;
struct mlx5_flow_cb_ctx *ctx = cb_ctx;
struct rte_eth_dev *dev = ctx->dev;
struct mlx5_flow_tbl_data_entry *tbl_data;
struct mlx5_flow_tbl_tunnel_prm *tt_prm = ctx->data2;
struct rte_flow_error *error = ctx->error;
union mlx5_flow_tbl_key key = { .v64 = *(uint64_t *)(ctx->data) };
struct mlx5_flow_tbl_resource *tbl;
void *domain;
uint32_t idx = 0;
int ret;
tbl_data = mlx5_ipool_zmalloc(sh->ipool[MLX5_IPOOL_JUMP], &idx);
if (!tbl_data) {
rte_flow_error_set(error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"cannot allocate flow table data entry");
return NULL;
}
tbl_data->idx = idx;
tbl_data->tunnel = tt_prm->tunnel;
tbl_data->group_id = tt_prm->group_id;
tbl_data->external = !!tt_prm->external;
tbl_data->tunnel_offload = is_tunnel_offload_active(dev);
tbl_data->is_egress = !!key.is_egress;
tbl_data->is_transfer = !!key.is_fdb;
tbl_data->dummy = !!key.dummy;
tbl_data->level = key.level;
tbl_data->id = key.id;
tbl = &tbl_data->tbl;
if (key.dummy)
return &tbl_data->entry;
if (key.is_fdb)
domain = sh->fdb_domain;
else if (key.is_egress)
domain = sh->tx_domain;
else
domain = sh->rx_domain;
ret = mlx5_flow_os_create_flow_tbl(domain, key.level, &tbl->obj);
if (ret) {
rte_flow_error_set(error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL, "cannot create flow table object");
mlx5_ipool_free(sh->ipool[MLX5_IPOOL_JUMP], idx);
return NULL;
}
if (key.level != 0) {
ret = mlx5_flow_os_create_flow_action_dest_flow_tbl
(tbl->obj, &tbl_data->jump.action);
if (ret) {
rte_flow_error_set(error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"cannot create flow jump action");
mlx5_flow_os_destroy_flow_tbl(tbl->obj);
mlx5_ipool_free(sh->ipool[MLX5_IPOOL_JUMP], idx);
return NULL;
}
}
MKSTR(matcher_name, "%s_%s_%u_%u_matcher_list",
key.is_fdb ? "FDB" : "NIC", key.is_egress ? "egress" : "ingress",
key.level, key.id);
tbl_data->matchers = mlx5_list_create(matcher_name, sh, true,
flow_dv_matcher_create_cb,
flow_dv_matcher_match_cb,
flow_dv_matcher_remove_cb,
flow_dv_matcher_clone_cb,
flow_dv_matcher_clone_free_cb);
if (!tbl_data->matchers) {
rte_flow_error_set(error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"cannot create tbl matcher list");
mlx5_flow_os_destroy_flow_action(tbl_data->jump.action);
mlx5_flow_os_destroy_flow_tbl(tbl->obj);
mlx5_ipool_free(sh->ipool[MLX5_IPOOL_JUMP], idx);
return NULL;
}
return &tbl_data->entry;
}
int
flow_dv_tbl_match_cb(void *tool_ctx __rte_unused, struct mlx5_list_entry *entry,
void *cb_ctx)
{
struct mlx5_flow_cb_ctx *ctx = cb_ctx;
struct mlx5_flow_tbl_data_entry *tbl_data =
container_of(entry, struct mlx5_flow_tbl_data_entry, entry);
union mlx5_flow_tbl_key key = { .v64 = *(uint64_t *)(ctx->data) };
return tbl_data->level != key.level ||
tbl_data->id != key.id ||
tbl_data->dummy != key.dummy ||
tbl_data->is_transfer != !!key.is_fdb ||
tbl_data->is_egress != !!key.is_egress;
}
struct mlx5_list_entry *
flow_dv_tbl_clone_cb(void *tool_ctx, struct mlx5_list_entry *oentry,
void *cb_ctx)
{
struct mlx5_dev_ctx_shared *sh = tool_ctx;
struct mlx5_flow_cb_ctx *ctx = cb_ctx;
struct mlx5_flow_tbl_data_entry *tbl_data;
struct rte_flow_error *error = ctx->error;
uint32_t idx = 0;
tbl_data = mlx5_ipool_malloc(sh->ipool[MLX5_IPOOL_JUMP], &idx);
if (!tbl_data) {
rte_flow_error_set(error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"cannot allocate flow table data entry");
return NULL;
}
memcpy(tbl_data, oentry, sizeof(*tbl_data));
tbl_data->idx = idx;
return &tbl_data->entry;
}
void
flow_dv_tbl_clone_free_cb(void *tool_ctx, struct mlx5_list_entry *entry)
{
struct mlx5_dev_ctx_shared *sh = tool_ctx;
struct mlx5_flow_tbl_data_entry *tbl_data =
container_of(entry, struct mlx5_flow_tbl_data_entry, entry);
mlx5_ipool_free(sh->ipool[MLX5_IPOOL_JUMP], tbl_data->idx);
}
/**
* Get a flow table.
*
* @param[in, out] dev
* Pointer to rte_eth_dev structure.
* @param[in] table_level
* Table level to use.
* @param[in] egress
* Direction of the table.
* @param[in] transfer
* E-Switch or NIC flow.
* @param[in] dummy
* Dummy entry for dv API.
* @param[in] table_id
* Table id to use.
* @param[out] error
* pointer to error structure.
*
* @return
* Returns tables resource based on the index, NULL in case of failed.
*/
struct mlx5_flow_tbl_resource *
flow_dv_tbl_resource_get(struct rte_eth_dev *dev,
uint32_t table_level, uint8_t egress,
uint8_t transfer,
bool external,
const struct mlx5_flow_tunnel *tunnel,
uint32_t group_id, uint8_t dummy,
uint32_t table_id,
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
union mlx5_flow_tbl_key table_key = {
{
.level = table_level,
.id = table_id,
.reserved = 0,
.dummy = !!dummy,
.is_fdb = !!transfer,
.is_egress = !!egress,
}
};
struct mlx5_flow_tbl_tunnel_prm tt_prm = {
.tunnel = tunnel,
.group_id = group_id,
.external = external,
};
struct mlx5_flow_cb_ctx ctx = {
.dev = dev,
.error = error,
.data = &table_key.v64,
.data2 = &tt_prm,
};
struct mlx5_list_entry *entry;
struct mlx5_flow_tbl_data_entry *tbl_data;
entry = mlx5_hlist_register(priv->sh->flow_tbls, table_key.v64, &ctx);
if (!entry) {
rte_flow_error_set(error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"cannot get table");
return NULL;
}
DRV_LOG(DEBUG, "table_level %u table_id %u "
"tunnel %u group %u registered.",
table_level, table_id,
tunnel ? tunnel->tunnel_id : 0, group_id);
tbl_data = container_of(entry, struct mlx5_flow_tbl_data_entry, entry);
return &tbl_data->tbl;
}
void
flow_dv_tbl_remove_cb(void *tool_ctx, struct mlx5_list_entry *entry)
{
struct mlx5_dev_ctx_shared *sh = tool_ctx;
struct mlx5_flow_tbl_data_entry *tbl_data =
container_of(entry, struct mlx5_flow_tbl_data_entry, entry);
MLX5_ASSERT(entry && sh);
if (tbl_data->jump.action)
mlx5_flow_os_destroy_flow_action(tbl_data->jump.action);
if (tbl_data->tbl.obj)
mlx5_flow_os_destroy_flow_tbl(tbl_data->tbl.obj);
if (tbl_data->tunnel_offload && tbl_data->external) {
struct mlx5_list_entry *he;
struct mlx5_hlist *tunnel_grp_hash;
struct mlx5_flow_tunnel_hub *thub = sh->tunnel_hub;
union tunnel_tbl_key tunnel_key = {
.tunnel_id = tbl_data->tunnel ?
tbl_data->tunnel->tunnel_id : 0,
.group = tbl_data->group_id
};
uint32_t table_level = tbl_data->level;
struct mlx5_flow_cb_ctx ctx = {
.data = (void *)&tunnel_key.val,
};
tunnel_grp_hash = tbl_data->tunnel ?
tbl_data->tunnel->groups :
thub->groups;
he = mlx5_hlist_lookup(tunnel_grp_hash, tunnel_key.val, &ctx);
if (he)
mlx5_hlist_unregister(tunnel_grp_hash, he);
DRV_LOG(DEBUG,
"table_level %u id %u tunnel %u group %u released.",
table_level,
tbl_data->id,
tbl_data->tunnel ?
tbl_data->tunnel->tunnel_id : 0,
tbl_data->group_id);
}
if (tbl_data->matchers)
mlx5_list_destroy(tbl_data->matchers);
mlx5_ipool_free(sh->ipool[MLX5_IPOOL_JUMP], tbl_data->idx);
}
/**
* Release a flow table.
*
* @param[in] sh
* Pointer to device shared structure.
* @param[in] tbl
* Table resource to be released.
*
* @return
* Returns 0 if table was released, else return 1;
*/
int
flow_dv_tbl_resource_release(struct mlx5_dev_ctx_shared *sh,
struct mlx5_flow_tbl_resource *tbl)
{
struct mlx5_flow_tbl_data_entry *tbl_data =
container_of(tbl, struct mlx5_flow_tbl_data_entry, tbl);
if (!tbl)
return 0;
return mlx5_hlist_unregister(sh->flow_tbls, &tbl_data->entry);
}
int
flow_dv_matcher_match_cb(void *tool_ctx __rte_unused,
struct mlx5_list_entry *entry, void *cb_ctx)
{
struct mlx5_flow_cb_ctx *ctx = cb_ctx;
struct mlx5_flow_dv_matcher *ref = ctx->data;
struct mlx5_flow_dv_matcher *cur = container_of(entry, typeof(*cur),
entry);
return cur->crc != ref->crc ||
cur->priority != ref->priority ||
memcmp((const void *)cur->mask.buf,
(const void *)ref->mask.buf, ref->mask.size);
}
struct mlx5_list_entry *
flow_dv_matcher_create_cb(void *tool_ctx, void *cb_ctx)
{
struct mlx5_dev_ctx_shared *sh = tool_ctx;
struct mlx5_flow_cb_ctx *ctx = cb_ctx;
struct mlx5_flow_dv_matcher *ref = ctx->data;
struct mlx5_flow_dv_matcher *resource;
struct mlx5dv_flow_matcher_attr dv_attr = {
.type = IBV_FLOW_ATTR_NORMAL,
.match_mask = (void *)&ref->mask,
};
struct mlx5_flow_tbl_data_entry *tbl = container_of(ref->tbl,
typeof(*tbl), tbl);
int ret;
resource = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*resource), 0,
SOCKET_ID_ANY);
if (!resource) {
rte_flow_error_set(ctx->error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"cannot create matcher");
return NULL;
}
*resource = *ref;
dv_attr.match_criteria_enable =
flow_dv_matcher_enable(resource->mask.buf);
__flow_dv_adjust_buf_size(&ref->mask.size,
dv_attr.match_criteria_enable);
dv_attr.priority = ref->priority;
if (tbl->is_egress)
dv_attr.flags |= IBV_FLOW_ATTR_FLAGS_EGRESS;
ret = mlx5_flow_os_create_flow_matcher(sh->cdev->ctx, &dv_attr,
tbl->tbl.obj,
&resource->matcher_object);
if (ret) {
mlx5_free(resource);
rte_flow_error_set(ctx->error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"cannot create matcher");
return NULL;
}
return &resource->entry;
}
/**
* Register the flow matcher.
*
* @param[in, out] dev
* Pointer to rte_eth_dev structure.
* @param[in, out] matcher
* Pointer to flow matcher.
* @param[in, out] key
* Pointer to flow table key.
* @parm[in, out] dev_flow
* Pointer to the dev_flow.
* @param[out] error
* pointer to error structure.
*
* @return
* 0 on success otherwise -errno and errno is set.
*/
static int
flow_dv_matcher_register(struct rte_eth_dev *dev,
struct mlx5_flow_dv_matcher *ref,
union mlx5_flow_tbl_key *key,
struct mlx5_flow *dev_flow,
const struct mlx5_flow_tunnel *tunnel,
uint32_t group_id,
struct rte_flow_error *error)
{
struct mlx5_list_entry *entry;
struct mlx5_flow_dv_matcher *resource;
struct mlx5_flow_tbl_resource *tbl;
struct mlx5_flow_tbl_data_entry *tbl_data;
struct mlx5_flow_cb_ctx ctx = {
.error = error,
.data = ref,
};
/**
* tunnel offload API requires this registration for cases when
* tunnel match rule was inserted before tunnel set rule.
*/
tbl = flow_dv_tbl_resource_get(dev, key->level,
key->is_egress, key->is_fdb,
dev_flow->external, tunnel,
group_id, 0, key->id, error);
if (!tbl)
return -rte_errno; /* No need to refill the error info */
tbl_data = container_of(tbl, struct mlx5_flow_tbl_data_entry, tbl);
ref->tbl = tbl;
entry = mlx5_list_register(tbl_data->matchers, &ctx);
if (!entry) {
flow_dv_tbl_resource_release(MLX5_SH(dev), tbl);
return rte_flow_error_set(error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"cannot allocate ref memory");
}
resource = container_of(entry, typeof(*resource), entry);
dev_flow->handle->dvh.matcher = resource;
return 0;
}
struct mlx5_list_entry *
flow_dv_tag_create_cb(void *tool_ctx, void *cb_ctx)
{
struct mlx5_dev_ctx_shared *sh = tool_ctx;
struct mlx5_flow_cb_ctx *ctx = cb_ctx;
struct mlx5_flow_dv_tag_resource *entry;
uint32_t idx = 0;
int ret;
entry = mlx5_ipool_zmalloc(sh->ipool[MLX5_IPOOL_TAG], &idx);
if (!entry) {
rte_flow_error_set(ctx->error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"cannot allocate resource memory");
return NULL;
}
entry->idx = idx;
entry->tag_id = *(uint32_t *)(ctx->data);
ret = mlx5_flow_os_create_flow_action_tag(entry->tag_id,
&entry->action);
if (ret) {
mlx5_ipool_free(sh->ipool[MLX5_IPOOL_TAG], idx);
rte_flow_error_set(ctx->error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL, "cannot create action");
return NULL;
}
return &entry->entry;
}
int
flow_dv_tag_match_cb(void *tool_ctx __rte_unused, struct mlx5_list_entry *entry,
void *cb_ctx)
{
struct mlx5_flow_cb_ctx *ctx = cb_ctx;
struct mlx5_flow_dv_tag_resource *tag =
container_of(entry, struct mlx5_flow_dv_tag_resource, entry);
return *(uint32_t *)(ctx->data) != tag->tag_id;
}
struct mlx5_list_entry *
flow_dv_tag_clone_cb(void *tool_ctx, struct mlx5_list_entry *oentry,
void *cb_ctx)
{
struct mlx5_dev_ctx_shared *sh = tool_ctx;
struct mlx5_flow_cb_ctx *ctx = cb_ctx;
struct mlx5_flow_dv_tag_resource *entry;
uint32_t idx = 0;
entry = mlx5_ipool_malloc(sh->ipool[MLX5_IPOOL_TAG], &idx);
if (!entry) {
rte_flow_error_set(ctx->error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"cannot allocate tag resource memory");
return NULL;
}
memcpy(entry, oentry, sizeof(*entry));
entry->idx = idx;
return &entry->entry;
}
void
flow_dv_tag_clone_free_cb(void *tool_ctx, struct mlx5_list_entry *entry)
{
struct mlx5_dev_ctx_shared *sh = tool_ctx;
struct mlx5_flow_dv_tag_resource *tag =
container_of(entry, struct mlx5_flow_dv_tag_resource, entry);
mlx5_ipool_free(sh->ipool[MLX5_IPOOL_TAG], tag->idx);
}
/**
* Find existing tag resource or create and register a new one.
*
* @param dev[in, out]
* Pointer to rte_eth_dev structure.
* @param[in, out] tag_be24
* Tag value in big endian then R-shift 8.
* @parm[in, out] dev_flow
* Pointer to the dev_flow.
* @param[out] error
* pointer to error structure.
*
* @return
* 0 on success otherwise -errno and errno is set.
*/
static int
flow_dv_tag_resource_register
(struct rte_eth_dev *dev,
uint32_t tag_be24,
struct mlx5_flow *dev_flow,
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_flow_dv_tag_resource *resource;
struct mlx5_list_entry *entry;
struct mlx5_flow_cb_ctx ctx = {
.error = error,
.data = &tag_be24,
};
struct mlx5_hlist *tag_table;
tag_table = flow_dv_hlist_prepare(priv->sh, &priv->sh->tag_table,
"tags",
MLX5_TAGS_HLIST_ARRAY_SIZE,
false, false, priv->sh,
flow_dv_tag_create_cb,
flow_dv_tag_match_cb,
flow_dv_tag_remove_cb,
flow_dv_tag_clone_cb,
flow_dv_tag_clone_free_cb,
error);
if (unlikely(!tag_table))
return -rte_errno;
entry = mlx5_hlist_register(tag_table, tag_be24, &ctx);
if (entry) {
resource = container_of(entry, struct mlx5_flow_dv_tag_resource,
entry);
dev_flow->handle->dvh.rix_tag = resource->idx;
dev_flow->dv.tag_resource = resource;
return 0;
}
return -rte_errno;
}
void
flow_dv_tag_remove_cb(void *tool_ctx, struct mlx5_list_entry *entry)
{
struct mlx5_dev_ctx_shared *sh = tool_ctx;
struct mlx5_flow_dv_tag_resource *tag =
container_of(entry, struct mlx5_flow_dv_tag_resource, entry);
MLX5_ASSERT(tag && sh && tag->action);
claim_zero(mlx5_flow_os_destroy_flow_action(tag->action));
DRV_LOG(DEBUG, "Tag %p: removed.", (void *)tag);
mlx5_ipool_free(sh->ipool[MLX5_IPOOL_TAG], tag->idx);
}
/**
* Release the tag.
*
* @param dev
* Pointer to Ethernet device.
* @param tag_idx
* Tag index.
*
* @return
* 1 while a reference on it exists, 0 when freed.
*/
static int
flow_dv_tag_release(struct rte_eth_dev *dev,
uint32_t tag_idx)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_flow_dv_tag_resource *tag;
tag = mlx5_ipool_get(priv->sh->ipool[MLX5_IPOOL_TAG], tag_idx);
if (!tag)
return 0;
DRV_LOG(DEBUG, "port %u tag %p: refcnt %d--",
dev->data->port_id, (void *)tag, tag->entry.ref_cnt);
return mlx5_hlist_unregister(priv->sh->tag_table, &tag->entry);
}
/**
* Translate action PORT_ID / REPRESENTED_PORT to vport.
*
* @param[in] dev
* Pointer to rte_eth_dev structure.
* @param[in] action
* Pointer to action PORT_ID / REPRESENTED_PORT.
* @param[out] dst_port_id
* The target port ID.
* @param[out] error
* Pointer to the error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_translate_action_port_id(struct rte_eth_dev *dev,
const struct rte_flow_action *action,
uint32_t *dst_port_id,
struct rte_flow_error *error)
{
uint32_t port;
struct mlx5_priv *priv;
switch (action->type) {
case RTE_FLOW_ACTION_TYPE_PORT_ID: {
const struct rte_flow_action_port_id *conf;
conf = (const struct rte_flow_action_port_id *)action->conf;
port = conf->original ? dev->data->port_id : conf->id;
break;
}
case RTE_FLOW_ACTION_TYPE_REPRESENTED_PORT: {
const struct rte_flow_action_ethdev *ethdev;
ethdev = (const struct rte_flow_action_ethdev *)action->conf;
port = ethdev->port_id;
break;
}
default:
MLX5_ASSERT(false);
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, action,
"unknown E-Switch action");
}
priv = mlx5_port_to_eswitch_info(port, false);
if (!priv)
return rte_flow_error_set(error, -rte_errno,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"No eswitch info was found for port");
#ifdef HAVE_MLX5DV_DR_CREATE_DEST_IB_PORT
/*
* This parameter is transferred to
* mlx5dv_dr_action_create_dest_ib_port().
*/
*dst_port_id = priv->dev_port;
#else
/*
* Legacy mode, no LAG configurations is supported.
* This parameter is transferred to
* mlx5dv_dr_action_create_dest_vport().
*/
*dst_port_id = priv->vport_id;
#endif
return 0;
}
/**
* Create a counter with aging configuration.
*
* @param[in] dev
* Pointer to rte_eth_dev structure.
* @param[in] dev_flow
* Pointer to the mlx5_flow.
* @param[out] count
* Pointer to the counter action configuration.
* @param[in] age
* Pointer to the aging action configuration.
*
* @return
* Index to flow counter on success, 0 otherwise.
*/
static uint32_t
flow_dv_translate_create_counter(struct rte_eth_dev *dev,
struct mlx5_flow *dev_flow,
const struct rte_flow_action_count *count
__rte_unused,
const struct rte_flow_action_age *age)
{
uint32_t counter;
struct mlx5_age_param *age_param;
counter = flow_dv_counter_alloc(dev, !!age);
if (!counter || age == NULL)
return counter;
age_param = flow_dv_counter_idx_get_age(dev, counter);
age_param->context = age->context ? age->context :
(void *)(uintptr_t)(dev_flow->flow_idx);
age_param->timeout = age->timeout;
age_param->port_id = dev->data->port_id;
__atomic_store_n(&age_param->sec_since_last_hit, 0, __ATOMIC_RELAXED);
__atomic_store_n(&age_param->state, AGE_CANDIDATE, __ATOMIC_RELAXED);
return counter;
}
/**
* Add SQ matcher
*
* @param[in, out] matcher
* Flow matcher.
* @param[in, out] key
* Flow matcher value.
* @param[in] item
* Flow pattern to translate.
* @param[in] key_type
* Set flow matcher mask or value.
*/
static void
flow_dv_translate_item_sq(void *key,
const struct rte_flow_item *item,
uint32_t key_type)
{
const struct mlx5_rte_flow_item_sq *queue_m;
const struct mlx5_rte_flow_item_sq *queue_v;
const struct mlx5_rte_flow_item_sq queue_mask = {
.queue = UINT32_MAX,
};
void *misc_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters);
uint32_t queue;
MLX5_ITEM_UPDATE(item, key_type, queue_v, queue_m, &queue_mask);
if (!queue_m || !queue_v)
return;
if (key_type & MLX5_SET_MATCHER_V) {
queue = queue_v->queue;
if (key_type == MLX5_SET_MATCHER_SW_V)
queue &= queue_m->queue;
} else {
queue = queue_m->queue;
}
MLX5_SET(fte_match_set_misc, misc_v, source_sqn, queue);
}
/**
* Set the hash fields according to the @p flow information.
*
* @param[in] item_flags
* The match pattern item flags.
* @param[in] rss_desc
* Pointer to the mlx5_flow_rss_desc.
* @param[out] hash_fields
* Pointer to the RSS hash fields.
*/
void
flow_dv_hashfields_set(uint64_t item_flags,
struct mlx5_flow_rss_desc *rss_desc,
uint64_t *hash_fields)
{
uint64_t items = item_flags;
uint64_t fields = 0;
int rss_inner = 0;
uint64_t rss_types = rte_eth_rss_hf_refine(rss_desc->types);
*hash_fields = 0;
#ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
if (rss_desc->level >= 2)
rss_inner = 1;
#endif
if ((rss_inner && (items & MLX5_FLOW_LAYER_INNER_L3_IPV4)) ||
(!rss_inner && (items & MLX5_FLOW_LAYER_OUTER_L3_IPV4))) {
if (rss_types & MLX5_IPV4_LAYER_TYPES) {
if (rss_types & RTE_ETH_RSS_L3_SRC_ONLY)
fields |= IBV_RX_HASH_SRC_IPV4;
else if (rss_types & RTE_ETH_RSS_L3_DST_ONLY)
fields |= IBV_RX_HASH_DST_IPV4;
else
fields |= MLX5_IPV4_IBV_RX_HASH;
}
} else if ((rss_inner && (items & MLX5_FLOW_LAYER_INNER_L3_IPV6)) ||
(!rss_inner && (items & MLX5_FLOW_LAYER_OUTER_L3_IPV6))) {
if (rss_types & MLX5_IPV6_LAYER_TYPES) {
if (rss_types & RTE_ETH_RSS_L3_SRC_ONLY)
fields |= IBV_RX_HASH_SRC_IPV6;
else if (rss_types & RTE_ETH_RSS_L3_DST_ONLY)
fields |= IBV_RX_HASH_DST_IPV6;
else
fields |= MLX5_IPV6_IBV_RX_HASH;
}
}
if (items & MLX5_FLOW_ITEM_ESP) {
if (rss_types & RTE_ETH_RSS_ESP)
fields |= IBV_RX_HASH_IPSEC_SPI;
}
if ((fields & ~IBV_RX_HASH_IPSEC_SPI) == 0) {
*hash_fields = fields;
/*
* There is no match between the RSS types and the
* L3 protocol (IPv4/IPv6) defined in the flow rule.
*/
return;
}
if ((rss_inner && (items & MLX5_FLOW_LAYER_INNER_L4_UDP)) ||
(!rss_inner && (items & MLX5_FLOW_LAYER_OUTER_L4_UDP))) {
if (rss_types & RTE_ETH_RSS_UDP) {
if (rss_types & RTE_ETH_RSS_L4_SRC_ONLY)
fields |= IBV_RX_HASH_SRC_PORT_UDP;
else if (rss_types & RTE_ETH_RSS_L4_DST_ONLY)
fields |= IBV_RX_HASH_DST_PORT_UDP;
else
fields |= MLX5_UDP_IBV_RX_HASH;
}
} else if ((rss_inner && (items & MLX5_FLOW_LAYER_INNER_L4_TCP)) ||
(!rss_inner && (items & MLX5_FLOW_LAYER_OUTER_L4_TCP))) {
if (rss_types & RTE_ETH_RSS_TCP) {
if (rss_types & RTE_ETH_RSS_L4_SRC_ONLY)
fields |= IBV_RX_HASH_SRC_PORT_TCP;
else if (rss_types & RTE_ETH_RSS_L4_DST_ONLY)
fields |= IBV_RX_HASH_DST_PORT_TCP;
else
fields |= MLX5_TCP_IBV_RX_HASH;
}
}
if (rss_inner)
fields |= IBV_RX_HASH_INNER;
*hash_fields = fields;
}
/**
* Prepare an Rx Hash queue.
*
* @param dev
* Pointer to Ethernet device.
* @param[in] dev_flow
* Pointer to the mlx5_flow.
* @param[in] rss_desc
* Pointer to the mlx5_flow_rss_desc.
* @param[out] hrxq_idx
* Hash Rx queue index.
*
* @return
* The Verbs/DevX object initialised, NULL otherwise and rte_errno is set.
*/
static struct mlx5_hrxq *
flow_dv_hrxq_prepare(struct rte_eth_dev *dev,
struct mlx5_flow *dev_flow,
struct mlx5_flow_rss_desc *rss_desc,
uint32_t *hrxq_idx)
{
struct mlx5_flow_handle *dh = dev_flow->handle;
uint32_t shared_rss = rss_desc->shared_rss;
struct mlx5_hrxq *hrxq;
MLX5_ASSERT(rss_desc->queue_num);
rss_desc->key_len = MLX5_RSS_HASH_KEY_LEN;
rss_desc->hash_fields = dev_flow->hash_fields;
rss_desc->tunnel = !!(dh->layers & MLX5_FLOW_LAYER_TUNNEL);
rss_desc->shared_rss = 0;
if (rss_desc->hash_fields == 0)
rss_desc->queue_num = 1;
hrxq = mlx5_hrxq_get(dev, rss_desc);
*hrxq_idx = hrxq ? hrxq->idx : 0;
rss_desc->shared_rss = shared_rss;
return hrxq;
}
/**
* Release sample sub action resource.
*
* @param[in, out] dev
* Pointer to rte_eth_dev structure.
* @param[in] act_res
* Pointer to sample sub action resource.
*/
static void
flow_dv_sample_sub_actions_release(struct rte_eth_dev *dev,
struct mlx5_flow_sub_actions_idx *act_res)
{
if (act_res->rix_hrxq) {
mlx5_hrxq_release(dev, act_res->rix_hrxq);
act_res->rix_hrxq = 0;
}
if (act_res->rix_encap_decap) {
flow_dv_encap_decap_resource_release(dev,
act_res->rix_encap_decap);
act_res->rix_encap_decap = 0;
}
if (act_res->rix_port_id_action) {
flow_dv_port_id_action_resource_release(dev,
act_res->rix_port_id_action);
act_res->rix_port_id_action = 0;
}
if (act_res->rix_tag) {
flow_dv_tag_release(dev, act_res->rix_tag);
act_res->rix_tag = 0;
}
if (act_res->rix_jump) {
flow_dv_jump_tbl_resource_release(dev, act_res->rix_jump);
act_res->rix_jump = 0;
}
}
int
flow_dv_sample_match_cb(void *tool_ctx __rte_unused,
struct mlx5_list_entry *entry, void *cb_ctx)
{
struct mlx5_flow_cb_ctx *ctx = cb_ctx;
struct rte_eth_dev *dev = ctx->dev;
struct mlx5_flow_dv_sample_resource *ctx_resource = ctx->data;
struct mlx5_flow_dv_sample_resource *resource = container_of(entry,
typeof(*resource),
entry);
if (ctx_resource->ratio == resource->ratio &&
ctx_resource->ft_type == resource->ft_type &&
ctx_resource->ft_id == resource->ft_id &&
ctx_resource->set_action == resource->set_action &&
!memcmp((void *)&ctx_resource->sample_act,
(void *)&resource->sample_act,
sizeof(struct mlx5_flow_sub_actions_list))) {
/*
* Existing sample action should release the prepared
* sub-actions reference counter.
*/
flow_dv_sample_sub_actions_release(dev,
&ctx_resource->sample_idx);
return 0;
}
return 1;
}
struct mlx5_list_entry *
flow_dv_sample_create_cb(void *tool_ctx __rte_unused, void *cb_ctx)
{
struct mlx5_flow_cb_ctx *ctx = cb_ctx;
struct rte_eth_dev *dev = ctx->dev;
struct mlx5_flow_dv_sample_resource *ctx_resource = ctx->data;
void **sample_dv_actions = ctx_resource->sub_actions;
struct mlx5_flow_dv_sample_resource *resource;
struct mlx5dv_dr_flow_sampler_attr sampler_attr;
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_dev_ctx_shared *sh = priv->sh;
struct mlx5_flow_tbl_resource *tbl;
uint32_t idx = 0;
const uint32_t next_ft_step = 1;
uint32_t next_ft_id = ctx_resource->ft_id + next_ft_step;
uint8_t is_egress = 0;
uint8_t is_transfer = 0;
struct rte_flow_error *error = ctx->error;
/* Register new sample resource. */
resource = mlx5_ipool_zmalloc(sh->ipool[MLX5_IPOOL_SAMPLE], &idx);
if (!resource) {
rte_flow_error_set(error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"cannot allocate resource memory");
return NULL;
}
*resource = *ctx_resource;
/* Create normal path table level */
if (ctx_resource->ft_type == MLX5DV_FLOW_TABLE_TYPE_FDB)
is_transfer = 1;
else if (ctx_resource->ft_type == MLX5DV_FLOW_TABLE_TYPE_NIC_TX)
is_egress = 1;
tbl = flow_dv_tbl_resource_get(dev, next_ft_id,
is_egress, is_transfer,
true, NULL, 0, 0, 0, error);
if (!tbl) {
rte_flow_error_set(error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"fail to create normal path table "
"for sample");
goto error;
}
resource->normal_path_tbl = tbl;
if (ctx_resource->ft_type == MLX5DV_FLOW_TABLE_TYPE_FDB) {
if (!sh->default_miss_action) {
rte_flow_error_set(error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"default miss action was not "
"created");
goto error;
}
sample_dv_actions[ctx_resource->sample_act.actions_num++] =
sh->default_miss_action;
}
/* Create a DR sample action */
sampler_attr.sample_ratio = resource->ratio;
sampler_attr.default_next_table = tbl->obj;
sampler_attr.num_sample_actions = ctx_resource->sample_act.actions_num;
sampler_attr.sample_actions = (struct mlx5dv_dr_action **)
&sample_dv_actions[0];
sampler_attr.action = resource->set_action;
if (mlx5_os_flow_dr_create_flow_action_sampler
(&sampler_attr, &resource->verbs_action)) {
rte_flow_error_set(error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL, "cannot create sample action");
goto error;
}
resource->idx = idx;
resource->dev = dev;
return &resource->entry;
error:
if (resource->ft_type != MLX5DV_FLOW_TABLE_TYPE_FDB)
flow_dv_sample_sub_actions_release(dev,
&resource->sample_idx);
if (resource->normal_path_tbl)
flow_dv_tbl_resource_release(MLX5_SH(dev),
resource->normal_path_tbl);
mlx5_ipool_free(sh->ipool[MLX5_IPOOL_SAMPLE], idx);
return NULL;
}
struct mlx5_list_entry *
flow_dv_sample_clone_cb(void *tool_ctx __rte_unused,
struct mlx5_list_entry *entry __rte_unused,
void *cb_ctx)
{
struct mlx5_flow_cb_ctx *ctx = cb_ctx;
struct rte_eth_dev *dev = ctx->dev;
struct mlx5_flow_dv_sample_resource *resource;
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_dev_ctx_shared *sh = priv->sh;
uint32_t idx = 0;
resource = mlx5_ipool_zmalloc(sh->ipool[MLX5_IPOOL_SAMPLE], &idx);
if (!resource) {
rte_flow_error_set(ctx->error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"cannot allocate resource memory");
return NULL;
}
memcpy(resource, entry, sizeof(*resource));
resource->idx = idx;
resource->dev = dev;
return &resource->entry;
}
void
flow_dv_sample_clone_free_cb(void *tool_ctx __rte_unused,
struct mlx5_list_entry *entry)
{
struct mlx5_flow_dv_sample_resource *resource =
container_of(entry, typeof(*resource), entry);
struct rte_eth_dev *dev = resource->dev;
struct mlx5_priv *priv = dev->data->dev_private;
mlx5_ipool_free(priv->sh->ipool[MLX5_IPOOL_SAMPLE], resource->idx);
}
/**
* Find existing sample resource or create and register a new one.
*
* @param[in, out] dev
* Pointer to rte_eth_dev structure.
* @param[in] ref
* Pointer to sample resource reference.
* @parm[in, out] dev_flow
* Pointer to the dev_flow.
* @param[out] error
* pointer to error structure.
*
* @return
* 0 on success otherwise -errno and errno is set.
*/
static int
flow_dv_sample_resource_register(struct rte_eth_dev *dev,
struct mlx5_flow_dv_sample_resource *ref,
struct mlx5_flow *dev_flow,
struct rte_flow_error *error)
{
struct mlx5_flow_dv_sample_resource *resource;
struct mlx5_list_entry *entry;
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_flow_cb_ctx ctx = {
.dev = dev,
.error = error,
.data = ref,
};
entry = mlx5_list_register(priv->sh->sample_action_list, &ctx);
if (!entry)
return -rte_errno;
resource = container_of(entry, typeof(*resource), entry);
dev_flow->handle->dvh.rix_sample = resource->idx;
dev_flow->dv.sample_res = resource;
return 0;
}
int
flow_dv_dest_array_match_cb(void *tool_ctx __rte_unused,
struct mlx5_list_entry *entry, void *cb_ctx)
{
struct mlx5_flow_cb_ctx *ctx = cb_ctx;
struct mlx5_flow_dv_dest_array_resource *ctx_resource = ctx->data;
struct rte_eth_dev *dev = ctx->dev;
struct mlx5_flow_dv_dest_array_resource *resource =
container_of(entry, typeof(*resource), entry);
uint32_t idx = 0;
if (ctx_resource->num_of_dest == resource->num_of_dest &&
ctx_resource->ft_type == resource->ft_type &&
!memcmp((void *)resource->sample_act,
(void *)ctx_resource->sample_act,
(ctx_resource->num_of_dest *
sizeof(struct mlx5_flow_sub_actions_list)))) {
/*
* Existing sample action should release the prepared
* sub-actions reference counter.
*/
for (idx = 0; idx < ctx_resource->num_of_dest; idx++)
flow_dv_sample_sub_actions_release(dev,
&ctx_resource->sample_idx[idx]);
return 0;
}
return 1;
}
struct mlx5_list_entry *
flow_dv_dest_array_create_cb(void *tool_ctx __rte_unused, void *cb_ctx)
{
struct mlx5_flow_cb_ctx *ctx = cb_ctx;
struct rte_eth_dev *dev = ctx->dev;
struct mlx5_flow_dv_dest_array_resource *resource;
struct mlx5_flow_dv_dest_array_resource *ctx_resource = ctx->data;
struct mlx5dv_dr_action_dest_attr *dest_attr[MLX5_MAX_DEST_NUM] = { 0 };
struct mlx5dv_dr_action_dest_reformat dest_reformat[MLX5_MAX_DEST_NUM];
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_dev_ctx_shared *sh = priv->sh;
struct mlx5_flow_sub_actions_list *sample_act;
struct mlx5dv_dr_domain *domain;
uint32_t idx = 0, res_idx = 0;
struct rte_flow_error *error = ctx->error;
uint64_t action_flags;
int ret;
/* Register new destination array resource. */
resource = mlx5_ipool_zmalloc(sh->ipool[MLX5_IPOOL_DEST_ARRAY],
&res_idx);
if (!resource) {
rte_flow_error_set(error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"cannot allocate resource memory");
return NULL;
}
*resource = *ctx_resource;
if (resource->ft_type == MLX5DV_FLOW_TABLE_TYPE_FDB)
domain = sh->fdb_domain;
else if (resource->ft_type == MLX5DV_FLOW_TABLE_TYPE_NIC_RX)
domain = sh->rx_domain;
else
domain = sh->tx_domain;
for (idx = 0; idx < ctx_resource->num_of_dest; idx++) {
dest_attr[idx] = (struct mlx5dv_dr_action_dest_attr *)
mlx5_malloc(MLX5_MEM_ZERO,
sizeof(struct mlx5dv_dr_action_dest_attr),
0, SOCKET_ID_ANY);
if (!dest_attr[idx]) {
rte_flow_error_set(error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"cannot allocate resource memory");
goto error;
}
dest_attr[idx]->type = MLX5DV_DR_ACTION_DEST;
sample_act = &ctx_resource->sample_act[idx];
action_flags = sample_act->action_flags;
switch (action_flags) {
case MLX5_FLOW_ACTION_QUEUE:
dest_attr[idx]->dest = sample_act->dr_queue_action;
break;
case (MLX5_FLOW_ACTION_PORT_ID | MLX5_FLOW_ACTION_ENCAP):
dest_attr[idx]->type = MLX5DV_DR_ACTION_DEST_REFORMAT;
dest_attr[idx]->dest_reformat = &dest_reformat[idx];
dest_attr[idx]->dest_reformat->reformat =
sample_act->dr_encap_action;
dest_attr[idx]->dest_reformat->dest =
sample_act->dr_port_id_action;
break;
case MLX5_FLOW_ACTION_PORT_ID:
dest_attr[idx]->dest = sample_act->dr_port_id_action;
break;
case MLX5_FLOW_ACTION_JUMP:
dest_attr[idx]->dest = sample_act->dr_jump_action;
break;
default:
rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"unsupported actions type");
goto error;
}
}
/* create a dest array action */
ret = mlx5_os_flow_dr_create_flow_action_dest_array
(domain,
resource->num_of_dest,
dest_attr,
&resource->action);
if (ret) {
rte_flow_error_set(error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"cannot create destination array action");
goto error;
}
resource->idx = res_idx;
resource->dev = dev;
for (idx = 0; idx < ctx_resource->num_of_dest; idx++)
mlx5_free(dest_attr[idx]);
return &resource->entry;
error:
for (idx = 0; idx < ctx_resource->num_of_dest; idx++) {
flow_dv_sample_sub_actions_release(dev,
&resource->sample_idx[idx]);
if (dest_attr[idx])
mlx5_free(dest_attr[idx]);
}
mlx5_ipool_free(sh->ipool[MLX5_IPOOL_DEST_ARRAY], res_idx);
return NULL;
}
struct mlx5_list_entry *
flow_dv_dest_array_clone_cb(void *tool_ctx __rte_unused,
struct mlx5_list_entry *entry __rte_unused,
void *cb_ctx)
{
struct mlx5_flow_cb_ctx *ctx = cb_ctx;
struct rte_eth_dev *dev = ctx->dev;
struct mlx5_flow_dv_dest_array_resource *resource;
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_dev_ctx_shared *sh = priv->sh;
uint32_t res_idx = 0;
struct rte_flow_error *error = ctx->error;
resource = mlx5_ipool_zmalloc(sh->ipool[MLX5_IPOOL_DEST_ARRAY],
&res_idx);
if (!resource) {
rte_flow_error_set(error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"cannot allocate dest-array memory");
return NULL;
}
memcpy(resource, entry, sizeof(*resource));
resource->idx = res_idx;
resource->dev = dev;
return &resource->entry;
}
void
flow_dv_dest_array_clone_free_cb(void *tool_ctx __rte_unused,
struct mlx5_list_entry *entry)
{
struct mlx5_flow_dv_dest_array_resource *resource =
container_of(entry, typeof(*resource), entry);
struct rte_eth_dev *dev = resource->dev;
struct mlx5_priv *priv = dev->data->dev_private;
mlx5_ipool_free(priv->sh->ipool[MLX5_IPOOL_DEST_ARRAY], resource->idx);
}
/**
* Find existing destination array resource or create and register a new one.
*
* @param[in, out] dev
* Pointer to rte_eth_dev structure.
* @param[in] ref
* Pointer to destination array resource reference.
* @parm[in, out] dev_flow
* Pointer to the dev_flow.
* @param[out] error
* pointer to error structure.
*
* @return
* 0 on success otherwise -errno and errno is set.
*/
static int
flow_dv_dest_array_resource_register(struct rte_eth_dev *dev,
struct mlx5_flow_dv_dest_array_resource *ref,
struct mlx5_flow *dev_flow,
struct rte_flow_error *error)
{
struct mlx5_flow_dv_dest_array_resource *resource;
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_list_entry *entry;
struct mlx5_flow_cb_ctx ctx = {
.dev = dev,
.error = error,
.data = ref,
};
entry = mlx5_list_register(priv->sh->dest_array_list, &ctx);
if (!entry)
return -rte_errno;
resource = container_of(entry, typeof(*resource), entry);
dev_flow->handle->dvh.rix_dest_array = resource->idx;
dev_flow->dv.dest_array_res = resource;
return 0;
}
/**
* Convert Sample action to DV specification.
*
* @param[in] dev
* Pointer to rte_eth_dev structure.
* @param[in] action
* Pointer to sample action structure.
* @param[in, out] dev_flow
* Pointer to the mlx5_flow.
* @param[in] attr
* Pointer to the flow attributes.
* @param[in, out] num_of_dest
* Pointer to the num of destination.
* @param[in, out] sample_actions
* Pointer to sample actions list.
* @param[in, out] res
* Pointer to sample resource.
* @param[out] error
* Pointer to the error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_translate_action_sample(struct rte_eth_dev *dev,
const struct rte_flow_action_sample *action,
struct mlx5_flow *dev_flow,
const struct rte_flow_attr *attr,
uint32_t *num_of_dest,
void **sample_actions,
struct mlx5_flow_dv_sample_resource *res,
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
const struct rte_flow_action *sub_actions;
struct mlx5_flow_sub_actions_list *sample_act;
struct mlx5_flow_sub_actions_idx *sample_idx;
struct mlx5_flow_workspace *wks = mlx5_flow_get_thread_workspace();
struct rte_flow *flow = dev_flow->flow;
struct mlx5_flow_rss_desc *rss_desc;
uint64_t action_flags = 0;
MLX5_ASSERT(wks);
rss_desc = &wks->rss_desc;
sample_act = &res->sample_act;
sample_idx = &res->sample_idx;
res->ratio = action->ratio;
sub_actions = action->actions;
for (; sub_actions->type != RTE_FLOW_ACTION_TYPE_END; sub_actions++) {
int type = sub_actions->type;
uint32_t pre_rix = 0;
void *pre_r;
switch (type) {
case RTE_FLOW_ACTION_TYPE_QUEUE:
{
const struct rte_flow_action_queue *queue;
struct mlx5_hrxq *hrxq;
uint32_t hrxq_idx;
queue = sub_actions->conf;
rss_desc->queue_num = 1;
rss_desc->queue[0] = queue->index;
hrxq = flow_dv_hrxq_prepare(dev, dev_flow,
rss_desc, &hrxq_idx);
if (!hrxq)
return rte_flow_error_set
(error, rte_errno,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"cannot create fate queue");
sample_act->dr_queue_action = hrxq->action;
sample_idx->rix_hrxq = hrxq_idx;
sample_actions[sample_act->actions_num++] =
hrxq->action;
(*num_of_dest)++;
action_flags |= MLX5_FLOW_ACTION_QUEUE;
if (action_flags & MLX5_FLOW_ACTION_MARK)
dev_flow->handle->rix_hrxq = hrxq_idx;
dev_flow->handle->fate_action =
MLX5_FLOW_FATE_QUEUE;
break;
}
case RTE_FLOW_ACTION_TYPE_RSS:
{
struct mlx5_hrxq *hrxq;
uint32_t hrxq_idx;
const struct rte_flow_action_rss *rss;
const uint8_t *rss_key;
rss = sub_actions->conf;
memcpy(rss_desc->queue, rss->queue,
rss->queue_num * sizeof(uint16_t));
rss_desc->queue_num = rss->queue_num;
/* NULL RSS key indicates default RSS key. */
rss_key = !rss->key ? rss_hash_default_key : rss->key;
memcpy(rss_desc->key, rss_key, MLX5_RSS_HASH_KEY_LEN);
/*
* rss->level and rss.types should be set in advance
* when expanding items for RSS.
*/
flow_dv_hashfields_set(dev_flow->handle->layers,
rss_desc,
&dev_flow->hash_fields);
hrxq = flow_dv_hrxq_prepare(dev, dev_flow,
rss_desc, &hrxq_idx);
if (!hrxq)
return rte_flow_error_set
(error, rte_errno,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"cannot create fate queue");
sample_act->dr_queue_action = hrxq->action;
sample_idx->rix_hrxq = hrxq_idx;
sample_actions[sample_act->actions_num++] =
hrxq->action;
(*num_of_dest)++;
action_flags |= MLX5_FLOW_ACTION_RSS;
if (action_flags & MLX5_FLOW_ACTION_MARK)
dev_flow->handle->rix_hrxq = hrxq_idx;
dev_flow->handle->fate_action =
MLX5_FLOW_FATE_QUEUE;
break;
}
case RTE_FLOW_ACTION_TYPE_MARK:
{
uint32_t tag_be = mlx5_flow_mark_set
(((const struct rte_flow_action_mark *)
(sub_actions->conf))->id);
wks->mark = 1;
pre_rix = dev_flow->handle->dvh.rix_tag;
/* Save the mark resource before sample */
pre_r = dev_flow->dv.tag_resource;
if (flow_dv_tag_resource_register(dev, tag_be,
dev_flow, error))
return -rte_errno;
MLX5_ASSERT(dev_flow->dv.tag_resource);
sample_act->dr_tag_action =
dev_flow->dv.tag_resource->action;
sample_idx->rix_tag =
dev_flow->handle->dvh.rix_tag;
sample_actions[sample_act->actions_num++] =
sample_act->dr_tag_action;
/* Recover the mark resource after sample */
dev_flow->dv.tag_resource = pre_r;
dev_flow->handle->dvh.rix_tag = pre_rix;
action_flags |= MLX5_FLOW_ACTION_MARK;
break;
}
case RTE_FLOW_ACTION_TYPE_COUNT:
{
if (!flow->counter) {
flow->counter =
flow_dv_translate_create_counter(dev,
dev_flow, sub_actions->conf,
0);
if (!flow->counter)
return rte_flow_error_set
(error, rte_errno,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"cannot create counter"
" object.");
}
sample_act->dr_cnt_action =
(flow_dv_counter_get_by_idx(dev,
flow->counter, NULL))->action;
sample_actions[sample_act->actions_num++] =
sample_act->dr_cnt_action;
action_flags |= MLX5_FLOW_ACTION_COUNT;
break;
}
case RTE_FLOW_ACTION_TYPE_PORT_ID:
case RTE_FLOW_ACTION_TYPE_REPRESENTED_PORT:
{
struct mlx5_flow_dv_port_id_action_resource
port_id_resource;
uint32_t port_id = 0;
memset(&port_id_resource, 0, sizeof(port_id_resource));
/* Save the port id resource before sample */
pre_rix = dev_flow->handle->rix_port_id_action;
pre_r = dev_flow->dv.port_id_action;
if (flow_dv_translate_action_port_id(dev, sub_actions,
&port_id, error))
return -rte_errno;
port_id_resource.port_id = port_id;
if (flow_dv_port_id_action_resource_register
(dev, &port_id_resource, dev_flow, error))
return -rte_errno;
sample_act->dr_port_id_action =
dev_flow->dv.port_id_action->action;
sample_idx->rix_port_id_action =
dev_flow->handle->rix_port_id_action;
sample_actions[sample_act->actions_num++] =
sample_act->dr_port_id_action;
/* Recover the port id resource after sample */
dev_flow->dv.port_id_action = pre_r;
dev_flow->handle->rix_port_id_action = pre_rix;
(*num_of_dest)++;
action_flags |= MLX5_FLOW_ACTION_PORT_ID;
break;
}
case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP:
case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP:
case RTE_FLOW_ACTION_TYPE_RAW_ENCAP:
/* Save the encap resource before sample */
pre_rix = dev_flow->handle->dvh.rix_encap_decap;
pre_r = dev_flow->dv.encap_decap;
if (flow_dv_create_action_l2_encap(dev, sub_actions,
dev_flow,
attr->transfer,
error))
return -rte_errno;
sample_act->dr_encap_action =
dev_flow->dv.encap_decap->action;
sample_idx->rix_encap_decap =
dev_flow->handle->dvh.rix_encap_decap;
sample_actions[sample_act->actions_num++] =
sample_act->dr_encap_action;
/* Recover the encap resource after sample */
dev_flow->dv.encap_decap = pre_r;
dev_flow->handle->dvh.rix_encap_decap = pre_rix;
action_flags |= MLX5_FLOW_ACTION_ENCAP;
break;
default:
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"Not support for sampler action");
}
}
sample_act->action_flags = action_flags;
res->ft_id = dev_flow->dv.group;
if (attr->transfer) {
union {
uint32_t action_in[MLX5_ST_SZ_DW(set_action_in)];
uint64_t set_action;
} action_ctx = { .set_action = 0 };
res->ft_type = MLX5DV_FLOW_TABLE_TYPE_FDB;
MLX5_SET(set_action_in, action_ctx.action_in, action_type,
MLX5_MODIFICATION_TYPE_SET);
MLX5_SET(set_action_in, action_ctx.action_in, field,
MLX5_MODI_META_REG_C_0);
MLX5_SET(set_action_in, action_ctx.action_in, data,
priv->vport_meta_tag);
res->set_action = action_ctx.set_action;
} else if (attr->ingress) {
res->ft_type = MLX5DV_FLOW_TABLE_TYPE_NIC_RX;
} else {
res->ft_type = MLX5DV_FLOW_TABLE_TYPE_NIC_TX;
}
return 0;
}
static void *
flow_dv_translate_action_send_to_kernel(struct rte_eth_dev *dev,
struct rte_flow_error *error)
{
struct mlx5_flow_tbl_resource *tbl;
struct mlx5_dev_ctx_shared *sh;
uint32_t priority;
void *action;
int ret;
sh = MLX5_SH(dev);
if (sh->send_to_kernel_action.action)
return sh->send_to_kernel_action.action;
priority = mlx5_get_send_to_kernel_priority(dev);
if (priority == (uint32_t)-1) {
rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"required priority is not available");
return NULL;
}
tbl = flow_dv_tbl_resource_get(dev, 0, 0, 0, false, NULL, 0, 0, 0,
error);
if (!tbl) {
rte_flow_error_set(error, ENODATA,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"cannot find destination root table");
return NULL;
}
ret = mlx5_flow_os_create_flow_action_send_to_kernel(tbl->obj,
priority, &action);
if (ret) {
rte_flow_error_set(error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"cannot create action");
goto err;
}
MLX5_ASSERT(action);
sh->send_to_kernel_action.action = action;
sh->send_to_kernel_action.tbl = tbl;
return action;
err:
flow_dv_tbl_resource_release(sh, tbl);
return NULL;
}
/**
* Convert Sample action to DV specification.
*
* @param[in] dev
* Pointer to rte_eth_dev structure.
* @param[in, out] dev_flow
* Pointer to the mlx5_flow.
* @param[in] num_of_dest
* The num of destination.
* @param[in, out] res
* Pointer to sample resource.
* @param[in, out] mdest_res
* Pointer to destination array resource.
* @param[in] sample_actions
* Pointer to sample path actions list.
* @param[in] action_flags
* Holds the actions detected until now.
* @param[out] error
* Pointer to the error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_create_action_sample(struct rte_eth_dev *dev,
struct mlx5_flow *dev_flow,
uint32_t num_of_dest,
struct mlx5_flow_dv_sample_resource *res,
struct mlx5_flow_dv_dest_array_resource *mdest_res,
void **sample_actions,
uint64_t action_flags,
struct rte_flow_error *error)
{
/* update normal path action resource into last index of array */
uint32_t dest_index = MLX5_MAX_DEST_NUM - 1;
struct mlx5_flow_sub_actions_list *sample_act =
&mdest_res->sample_act[dest_index];
struct mlx5_flow_workspace *wks = mlx5_flow_get_thread_workspace();
struct mlx5_flow_rss_desc *rss_desc;
uint32_t normal_idx = 0;
struct mlx5_hrxq *hrxq;
uint32_t hrxq_idx;
MLX5_ASSERT(wks);
rss_desc = &wks->rss_desc;
if (num_of_dest > 1) {
if (sample_act->action_flags & MLX5_FLOW_ACTION_QUEUE) {
/* Handle QP action for mirroring */
hrxq = flow_dv_hrxq_prepare(dev, dev_flow,
rss_desc, &hrxq_idx);
if (!hrxq)
return rte_flow_error_set
(error, rte_errno,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"cannot create rx queue");
normal_idx++;
mdest_res->sample_idx[dest_index].rix_hrxq = hrxq_idx;
sample_act->dr_queue_action = hrxq->action;
if (action_flags & MLX5_FLOW_ACTION_MARK)
dev_flow->handle->rix_hrxq = hrxq_idx;
dev_flow->handle->fate_action = MLX5_FLOW_FATE_QUEUE;
}
if (sample_act->action_flags & MLX5_FLOW_ACTION_ENCAP) {
normal_idx++;
mdest_res->sample_idx[dest_index].rix_encap_decap =
dev_flow->handle->dvh.rix_encap_decap;
sample_act->dr_encap_action =
dev_flow->dv.encap_decap->action;
dev_flow->handle->dvh.rix_encap_decap = 0;
}
if (sample_act->action_flags & MLX5_FLOW_ACTION_PORT_ID) {
normal_idx++;
mdest_res->sample_idx[dest_index].rix_port_id_action =
dev_flow->handle->rix_port_id_action;
sample_act->dr_port_id_action =
dev_flow->dv.port_id_action->action;
dev_flow->handle->rix_port_id_action = 0;
}
if (sample_act->action_flags & MLX5_FLOW_ACTION_JUMP) {
normal_idx++;
mdest_res->sample_idx[dest_index].rix_jump =
dev_flow->handle->rix_jump;
sample_act->dr_jump_action =
dev_flow->dv.jump->action;
dev_flow->handle->rix_jump = 0;
}
sample_act->actions_num = normal_idx;
/* update sample action resource into first index of array */
mdest_res->ft_type = res->ft_type;
memcpy(&mdest_res->sample_idx[0], &res->sample_idx,
sizeof(struct mlx5_flow_sub_actions_idx));
memcpy(&mdest_res->sample_act[0], &res->sample_act,
sizeof(struct mlx5_flow_sub_actions_list));
mdest_res->num_of_dest = num_of_dest;
if (flow_dv_dest_array_resource_register(dev, mdest_res,
dev_flow, error))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL, "can't create sample "
"action");
} else {
res->sub_actions = sample_actions;
if (flow_dv_sample_resource_register(dev, res, dev_flow, error))
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"can't create sample action");
}
return 0;
}
/**
* Remove an ASO age action from age actions list.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[in] age
* Pointer to the aso age action handler.
*/
static void
flow_dv_aso_age_remove_from_age(struct rte_eth_dev *dev,
struct mlx5_aso_age_action *age)
{
struct mlx5_age_info *age_info;
struct mlx5_age_param *age_param = &age->age_params;
struct mlx5_priv *priv = dev->data->dev_private;
uint16_t expected = AGE_CANDIDATE;
age_info = GET_PORT_AGE_INFO(priv);
if (!__atomic_compare_exchange_n(&age_param->state, &expected,
AGE_FREE, false, __ATOMIC_RELAXED,
__ATOMIC_RELAXED)) {
/**
* We need the lock even it is age timeout,
* since age action may still in process.
*/
rte_spinlock_lock(&age_info->aged_sl);
LIST_REMOVE(age, next);
rte_spinlock_unlock(&age_info->aged_sl);
__atomic_store_n(&age_param->state, AGE_FREE, __ATOMIC_RELAXED);
}
}
/**
* Release an ASO age action.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[in] age_idx
* Index of ASO age action to release.
* @param[in] flow
* True if the release operation is during flow destroy operation.
* False if the release operation is during action destroy operation.
*
* @return
* 0 when age action was removed, otherwise the number of references.
*/
static int
flow_dv_aso_age_release(struct rte_eth_dev *dev, uint32_t age_idx)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_aso_age_mng *mng = priv->sh->aso_age_mng;
struct mlx5_aso_age_action *age = flow_aso_age_get_by_idx(dev, age_idx);
uint32_t ret = __atomic_sub_fetch(&age->refcnt, 1, __ATOMIC_RELAXED);
if (!ret) {
flow_dv_aso_age_remove_from_age(dev, age);
rte_spinlock_lock(&mng->free_sl);
LIST_INSERT_HEAD(&mng->free, age, next);
rte_spinlock_unlock(&mng->free_sl);
}
return ret;
}
/**
* Resize the ASO age pools array by MLX5_CNT_CONTAINER_RESIZE pools.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
*
* @return
* 0 on success, otherwise negative errno value and rte_errno is set.
*/
static int
flow_dv_aso_age_pools_resize(struct rte_eth_dev *dev)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_aso_age_mng *mng = priv->sh->aso_age_mng;
void *old_pools = mng->pools;
uint32_t resize = mng->n + MLX5_CNT_CONTAINER_RESIZE;
uint32_t mem_size = sizeof(struct mlx5_aso_age_pool *) * resize;
void *pools = mlx5_malloc(MLX5_MEM_ZERO, mem_size, 0, SOCKET_ID_ANY);
if (!pools) {
rte_errno = ENOMEM;
return -ENOMEM;
}
if (old_pools) {
memcpy(pools, old_pools,
mng->n * sizeof(struct mlx5_flow_counter_pool *));
mlx5_free(old_pools);
} else {
/* First ASO flow hit allocation - starting ASO data-path. */
int ret = mlx5_aso_flow_hit_queue_poll_start(priv->sh);
if (ret) {
mlx5_free(pools);
return ret;
}
}
mng->n = resize;
mng->pools = pools;
return 0;
}
/**
* Create and initialize a new ASO aging pool.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[out] age_free
* Where to put the pointer of a new age action.
*
* @return
* The age actions pool pointer and @p age_free is set on success,
* NULL otherwise and rte_errno is set.
*/
static struct mlx5_aso_age_pool *
flow_dv_age_pool_create(struct rte_eth_dev *dev,
struct mlx5_aso_age_action **age_free)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_aso_age_mng *mng = priv->sh->aso_age_mng;
struct mlx5_aso_age_pool *pool = NULL;
struct mlx5_devx_obj *obj = NULL;
uint32_t i;
obj = mlx5_devx_cmd_create_flow_hit_aso_obj(priv->sh->cdev->ctx,
priv->sh->cdev->pdn);
if (!obj) {
rte_errno = ENODATA;
DRV_LOG(ERR, "Failed to create flow_hit_aso_obj using DevX.");
return NULL;
}
pool = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*pool), 0, SOCKET_ID_ANY);
if (!pool) {
claim_zero(mlx5_devx_cmd_destroy(obj));
rte_errno = ENOMEM;
return NULL;
}
pool->flow_hit_aso_obj = obj;
pool->time_of_last_age_check = MLX5_CURR_TIME_SEC;
rte_rwlock_write_lock(&mng->resize_rwl);
pool->index = mng->next;
/* Resize pools array if there is no room for the new pool in it. */
if (pool->index == mng->n && flow_dv_aso_age_pools_resize(dev)) {
claim_zero(mlx5_devx_cmd_destroy(obj));
mlx5_free(pool);
rte_rwlock_write_unlock(&mng->resize_rwl);
return NULL;
}
mng->pools[pool->index] = pool;
mng->next++;
rte_rwlock_write_unlock(&mng->resize_rwl);
/* Assign the first action in the new pool, the rest go to free list. */
*age_free = &pool->actions[0];
for (i = 1; i < MLX5_ASO_AGE_ACTIONS_PER_POOL; i++) {
pool->actions[i].offset = i;
LIST_INSERT_HEAD(&mng->free, &pool->actions[i], next);
}
return pool;
}
/**
* Allocate a ASO aging bit.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[out] error
* Pointer to the error structure.
*
* @return
* Index to ASO age action on success, 0 otherwise and rte_errno is set.
*/
static uint32_t
flow_dv_aso_age_alloc(struct rte_eth_dev *dev, struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
const struct mlx5_aso_age_pool *pool;
struct mlx5_aso_age_action *age_free = NULL;
struct mlx5_aso_age_mng *mng = priv->sh->aso_age_mng;
MLX5_ASSERT(mng);
/* Try to get the next free age action bit. */
rte_spinlock_lock(&mng->free_sl);
age_free = LIST_FIRST(&mng->free);
if (age_free) {
LIST_REMOVE(age_free, next);
} else if (!flow_dv_age_pool_create(dev, &age_free)) {
rte_spinlock_unlock(&mng->free_sl);
rte_flow_error_set(error, rte_errno, RTE_FLOW_ERROR_TYPE_ACTION,
NULL, "failed to create ASO age pool");
return 0; /* 0 is an error. */
}
rte_spinlock_unlock(&mng->free_sl);
pool = container_of
((const struct mlx5_aso_age_action (*)[MLX5_ASO_AGE_ACTIONS_PER_POOL])
(age_free - age_free->offset), const struct mlx5_aso_age_pool,
actions);
if (!age_free->dr_action) {
int reg_c = mlx5_flow_get_reg_id(dev, MLX5_ASO_FLOW_HIT, 0,
error);
if (reg_c < 0) {
rte_flow_error_set(error, rte_errno,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL, "failed to get reg_c "
"for ASO flow hit");
return 0; /* 0 is an error. */
}
#ifdef HAVE_MLX5_DR_CREATE_ACTION_ASO
age_free->dr_action = mlx5_glue->dv_create_flow_action_aso
(priv->sh->rx_domain,
pool->flow_hit_aso_obj->obj, age_free->offset,
MLX5DV_DR_ACTION_FLAGS_ASO_FIRST_HIT_SET,
(reg_c - REG_C_0));
#endif /* HAVE_MLX5_DR_CREATE_ACTION_ASO */
if (!age_free->dr_action) {
rte_errno = errno;
rte_spinlock_lock(&mng->free_sl);
LIST_INSERT_HEAD(&mng->free, age_free, next);
rte_spinlock_unlock(&mng->free_sl);
rte_flow_error_set(error, rte_errno,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL, "failed to create ASO "
"flow hit action");
return 0; /* 0 is an error. */
}
}
__atomic_store_n(&age_free->refcnt, 1, __ATOMIC_RELAXED);
return pool->index | ((age_free->offset + 1) << 16);
}
/**
* Initialize flow ASO age parameters.
*
* @param[in] dev
* Pointer to rte_eth_dev structure.
* @param[in] age_idx
* Index of ASO age action.
* @param[in] context
* Pointer to flow counter age context.
* @param[in] timeout
* Aging timeout in seconds.
*
*/
static void
flow_dv_aso_age_params_init(struct rte_eth_dev *dev,
uint32_t age_idx,
void *context,
uint32_t timeout)
{
struct mlx5_aso_age_action *aso_age;
aso_age = flow_aso_age_get_by_idx(dev, age_idx);
MLX5_ASSERT(aso_age);
aso_age->age_params.context = context;
aso_age->age_params.timeout = timeout;
aso_age->age_params.port_id = dev->data->port_id;
__atomic_store_n(&aso_age->age_params.sec_since_last_hit, 0,
__ATOMIC_RELAXED);
__atomic_store_n(&aso_age->age_params.state, AGE_CANDIDATE,
__ATOMIC_RELAXED);
}
static void
flow_dv_translate_integrity_l4(const struct rte_flow_item_integrity *mask,
void *headers)
{
/*
* In HWS mode MLX5_ITEM_UPDATE() macro assigns the same pointer to
* both mask and value, therefore ether can be used.
* In SWS SW_V mode mask points to item mask and value points to item
* spec. Integrity item value is used only if matching mask is set.
* Use mask reference here to keep SWS functionality.
*/
if (mask->l4_ok) {
/* RTE l4_ok filter aggregates hardware l4_ok and
* l4_checksum_ok filters.
* Positive RTE l4_ok match requires hardware match on both L4
* hardware integrity bits.
* PMD supports positive integrity item semantics only.
*/
MLX5_SET(fte_match_set_lyr_2_4, headers, l4_ok, 1);
MLX5_SET(fte_match_set_lyr_2_4, headers, l4_checksum_ok, 1);
} else if (mask->l4_csum_ok) {
MLX5_SET(fte_match_set_lyr_2_4, headers, l4_checksum_ok, 1);
}
}
static void
flow_dv_translate_integrity_l3(const struct rte_flow_item_integrity *mask,
void *headers, bool is_ipv4)
{
/*
* In HWS mode MLX5_ITEM_UPDATE() macro assigns the same pointer to
* both mask and value, therefore ether can be used.
* In SWS SW_V mode mask points to item mask and value points to item
* spec. Integrity item value used only if matching mask is set.
* Use mask reference here to keep SWS functionality.
*/
if (mask->l3_ok) {
/* RTE l3_ok filter aggregates for IPv4 hardware l3_ok and
* ipv4_csum_ok filters.
* Positive RTE l3_ok match requires hardware match on both L3
* hardware integrity bits.
* PMD supports positive integrity item semantics only.
*/
MLX5_SET(fte_match_set_lyr_2_4, headers, l3_ok, 1);
if (is_ipv4) {
MLX5_SET(fte_match_set_lyr_2_4, headers,
ipv4_checksum_ok, 1);
}
} else if (is_ipv4 && mask->ipv4_csum_ok) {
MLX5_SET(fte_match_set_lyr_2_4, headers, ipv4_checksum_ok, 1);
}
}
static void
set_integrity_bits(void *headers, const struct rte_flow_item *integrity_item,
bool is_l3_ip4, uint32_t key_type)
{
const struct rte_flow_item_integrity *spec;
const struct rte_flow_item_integrity *mask;
/* Integrity bits validation cleared spec pointer */
if (MLX5_ITEM_VALID(integrity_item, key_type))
return;
MLX5_ITEM_UPDATE(integrity_item, key_type, spec, mask,
&rte_flow_item_integrity_mask);
flow_dv_translate_integrity_l3(mask, headers, is_l3_ip4);
flow_dv_translate_integrity_l4(mask, headers);
}
static void
flow_dv_translate_item_integrity_post(void *key,
const
struct rte_flow_item *integrity_items[2],
uint64_t pattern_flags, uint32_t key_type)
{
void *headers;
bool is_l3_ip4;
if (pattern_flags & MLX5_FLOW_ITEM_INNER_INTEGRITY) {
headers = MLX5_ADDR_OF(fte_match_param, key, inner_headers);
is_l3_ip4 = (pattern_flags & MLX5_FLOW_LAYER_INNER_L3_IPV4) !=
0;
set_integrity_bits(headers, integrity_items[1], is_l3_ip4,
key_type);
}
if (pattern_flags & MLX5_FLOW_ITEM_OUTER_INTEGRITY) {
headers = MLX5_ADDR_OF(fte_match_param, key, outer_headers);
is_l3_ip4 = (pattern_flags & MLX5_FLOW_LAYER_OUTER_L3_IPV4) !=
0;
set_integrity_bits(headers, integrity_items[0], is_l3_ip4,
key_type);
}
}
static uint64_t
flow_dv_translate_item_integrity(const struct rte_flow_item *item,
struct mlx5_dv_matcher_workspace *wks,
uint64_t key_type)
{
if ((key_type & MLX5_SET_MATCHER_SW) != 0) {
const struct rte_flow_item_integrity
*spec = (typeof(spec))item->spec;
/* SWS integrity bits validation cleared spec pointer */
if (spec->level > 1) {
wks->integrity_items[1] = item;
wks->last_item |= MLX5_FLOW_ITEM_INNER_INTEGRITY;
} else {
wks->integrity_items[0] = item;
wks->last_item |= MLX5_FLOW_ITEM_OUTER_INTEGRITY;
}
} else {
/* HWS supports outer integrity only */
wks->integrity_items[0] = item;
wks->last_item |= MLX5_FLOW_ITEM_OUTER_INTEGRITY;
}
return wks->last_item;
}
/**
* Prepares DV flow counter with aging configuration.
* Gets it by index when exists, creates a new one when doesn't.
*
* @param[in] dev
* Pointer to rte_eth_dev structure.
* @param[in] dev_flow
* Pointer to the mlx5_flow.
* @param[in, out] flow
* Pointer to the sub flow.
* @param[in] count
* Pointer to the counter action configuration.
* @param[in] age
* Pointer to the aging action configuration.
* @param[out] error
* Pointer to the error structure.
*
* @return
* Pointer to the counter, NULL otherwise.
*/
static struct mlx5_flow_counter *
flow_dv_prepare_counter(struct rte_eth_dev *dev,
struct mlx5_flow *dev_flow,
struct rte_flow *flow,
const struct rte_flow_action_count *count,
const struct rte_flow_action_age *age,
struct rte_flow_error *error)
{
if (!flow->counter) {
flow->counter = flow_dv_translate_create_counter(dev, dev_flow,
count, age);
if (!flow->counter) {
rte_flow_error_set(error, rte_errno,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"cannot create counter object.");
return NULL;
}
}
return flow_dv_counter_get_by_idx(dev, flow->counter, NULL);
}
/*
* Release an ASO CT action by its own device.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[in] idx
* Index of ASO CT action to release.
*
* @return
* 0 when CT action was removed, otherwise the number of references.
*/
static inline int
flow_dv_aso_ct_dev_release(struct rte_eth_dev *dev, uint32_t idx)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_aso_ct_pools_mng *mng = priv->sh->ct_mng;
uint32_t ret;
struct mlx5_aso_ct_action *ct = flow_aso_ct_get_by_dev_idx(dev, idx);
enum mlx5_aso_ct_state state =
__atomic_load_n(&ct->state, __ATOMIC_RELAXED);
/* Cannot release when CT is in the ASO SQ. */
if (state == ASO_CONNTRACK_WAIT || state == ASO_CONNTRACK_QUERY)
return -1;
ret = __atomic_sub_fetch(&ct->refcnt, 1, __ATOMIC_RELAXED);
if (!ret) {
if (ct->dr_action_orig) {
#ifdef HAVE_MLX5_DR_ACTION_ASO_CT
claim_zero(mlx5_glue->destroy_flow_action
(ct->dr_action_orig));
#endif
ct->dr_action_orig = NULL;
}
if (ct->dr_action_rply) {
#ifdef HAVE_MLX5_DR_ACTION_ASO_CT
claim_zero(mlx5_glue->destroy_flow_action
(ct->dr_action_rply));
#endif
ct->dr_action_rply = NULL;
}
/* Clear the state to free, no need in 1st allocation. */
MLX5_ASO_CT_UPDATE_STATE(ct, ASO_CONNTRACK_FREE);
rte_spinlock_lock(&mng->ct_sl);
LIST_INSERT_HEAD(&mng->free_cts, ct, next);
rte_spinlock_unlock(&mng->ct_sl);
}
return (int)ret;
}
static inline int
flow_dv_aso_ct_release(struct rte_eth_dev *dev, uint32_t own_idx,
struct rte_flow_error *error)
{
uint16_t owner = (uint16_t)MLX5_INDIRECT_ACT_CT_GET_OWNER(own_idx);
uint32_t idx = MLX5_INDIRECT_ACT_CT_GET_IDX(own_idx);
struct rte_eth_dev *owndev = &rte_eth_devices[owner];
int ret;
MLX5_ASSERT(owner < RTE_MAX_ETHPORTS);
if (dev->data->dev_started != 1)
return rte_flow_error_set(error, EAGAIN,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"Indirect CT action cannot be destroyed when the port is stopped");
ret = flow_dv_aso_ct_dev_release(owndev, idx);
if (ret < 0)
return rte_flow_error_set(error, EAGAIN,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"Current state prevents indirect CT action from being destroyed");
return ret;
}
/*
* Resize the ASO CT pools array by 64 pools.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
*
* @return
* 0 on success, otherwise negative errno value and rte_errno is set.
*/
static int
flow_dv_aso_ct_pools_resize(struct rte_eth_dev *dev)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_aso_ct_pools_mng *mng = priv->sh->ct_mng;
void *old_pools = mng->pools;
/* Magic number now, need a macro. */
uint32_t resize = mng->n + 64;
uint32_t mem_size = sizeof(struct mlx5_aso_ct_pool *) * resize;
void *pools = mlx5_malloc(MLX5_MEM_ZERO, mem_size, 0, SOCKET_ID_ANY);
if (!pools) {
rte_errno = ENOMEM;
return -rte_errno;
}
rte_rwlock_write_lock(&mng->resize_rwl);
/* ASO SQ/QP was already initialized in the startup. */
if (old_pools) {
/* Realloc could be an alternative choice. */
rte_memcpy(pools, old_pools,
mng->n * sizeof(struct mlx5_aso_ct_pool *));
mlx5_free(old_pools);
}
mng->n = resize;
mng->pools = pools;
rte_rwlock_write_unlock(&mng->resize_rwl);
return 0;
}
/*
* Create and initialize a new ASO CT pool.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[out] ct_free
* Where to put the pointer of a new CT action.
*
* @return
* The CT actions pool pointer and @p ct_free is set on success,
* NULL otherwise and rte_errno is set.
*/
static struct mlx5_aso_ct_pool *
flow_dv_ct_pool_create(struct rte_eth_dev *dev,
struct mlx5_aso_ct_action **ct_free)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_aso_ct_pools_mng *mng = priv->sh->ct_mng;
struct mlx5_aso_ct_pool *pool = NULL;
struct mlx5_devx_obj *obj = NULL;
uint32_t i;
uint32_t log_obj_size = rte_log2_u32(MLX5_ASO_CT_ACTIONS_PER_POOL);
size_t mem_size;
obj = mlx5_devx_cmd_create_conn_track_offload_obj(priv->sh->cdev->ctx,
priv->sh->cdev->pdn,
log_obj_size);
if (!obj) {
rte_errno = ENODATA;
DRV_LOG(ERR, "Failed to create conn_track_offload_obj using DevX.");
return NULL;
}
mem_size = sizeof(struct mlx5_aso_ct_action) *
MLX5_ASO_CT_ACTIONS_PER_POOL +
sizeof(*pool);
pool = mlx5_malloc(MLX5_MEM_ZERO, mem_size, 0, SOCKET_ID_ANY);
if (!pool) {
rte_errno = ENOMEM;
claim_zero(mlx5_devx_cmd_destroy(obj));
return NULL;
}
pool->devx_obj = obj;
pool->index = mng->next;
/* Resize pools array if there is no room for the new pool in it. */
if (pool->index == mng->n && flow_dv_aso_ct_pools_resize(dev)) {
claim_zero(mlx5_devx_cmd_destroy(obj));
mlx5_free(pool);
return NULL;
}
mng->pools[pool->index] = pool;
mng->next++;
/* Assign the first action in the new pool, the rest go to free list. */
*ct_free = &pool->actions[0];
/* Lock outside, the list operation is safe here. */
for (i = 1; i < MLX5_ASO_CT_ACTIONS_PER_POOL; i++) {
/* refcnt is 0 when allocating the memory. */
pool->actions[i].offset = i;
LIST_INSERT_HEAD(&mng->free_cts, &pool->actions[i], next);
}
return pool;
}
/*
* Allocate a ASO CT action from free list.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[out] error
* Pointer to the error structure.
*
* @return
* Index to ASO CT action on success, 0 otherwise and rte_errno is set.
*/
static uint32_t
flow_dv_aso_ct_alloc(struct rte_eth_dev *dev, struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_aso_ct_pools_mng *mng = priv->sh->ct_mng;
struct mlx5_aso_ct_action *ct = NULL;
struct mlx5_aso_ct_pool *pool;
uint8_t reg_c;
uint32_t ct_idx;
MLX5_ASSERT(mng);
if (!priv->sh->cdev->config.devx) {
rte_errno = ENOTSUP;
return 0;
}
/* Get a free CT action, if no, a new pool will be created. */
rte_spinlock_lock(&mng->ct_sl);
ct = LIST_FIRST(&mng->free_cts);
if (ct) {
LIST_REMOVE(ct, next);
} else if (!flow_dv_ct_pool_create(dev, &ct)) {
rte_spinlock_unlock(&mng->ct_sl);
rte_flow_error_set(error, rte_errno, RTE_FLOW_ERROR_TYPE_ACTION,
NULL, "failed to create ASO CT pool");
return 0;
}
rte_spinlock_unlock(&mng->ct_sl);
pool = container_of(ct, struct mlx5_aso_ct_pool, actions[ct->offset]);
ct_idx = MLX5_MAKE_CT_IDX(pool->index, ct->offset);
/* 0: inactive, 1: created, 2+: used by flows. */
__atomic_store_n(&ct->refcnt, 1, __ATOMIC_RELAXED);
reg_c = mlx5_flow_get_reg_id(dev, MLX5_ASO_CONNTRACK, 0, error);
if (!ct->dr_action_orig) {
#ifdef HAVE_MLX5_DR_ACTION_ASO_CT
ct->dr_action_orig = mlx5_glue->dv_create_flow_action_aso
(priv->sh->rx_domain, pool->devx_obj->obj,
ct->offset,
MLX5DV_DR_ACTION_FLAGS_ASO_CT_DIRECTION_INITIATOR,
reg_c - REG_C_0);
#else
RTE_SET_USED(reg_c);
#endif
if (!ct->dr_action_orig) {
flow_dv_aso_ct_dev_release(dev, ct_idx);
rte_flow_error_set(error, rte_errno,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"failed to create ASO CT action");
return 0;
}
}
if (!ct->dr_action_rply) {
#ifdef HAVE_MLX5_DR_ACTION_ASO_CT
ct->dr_action_rply = mlx5_glue->dv_create_flow_action_aso
(priv->sh->rx_domain, pool->devx_obj->obj,
ct->offset,
MLX5DV_DR_ACTION_FLAGS_ASO_CT_DIRECTION_RESPONDER,
reg_c - REG_C_0);
#endif
if (!ct->dr_action_rply) {
flow_dv_aso_ct_dev_release(dev, ct_idx);
rte_flow_error_set(error, rte_errno,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"failed to create ASO CT action");
return 0;
}
}
return ct_idx;
}
/*
* Create a conntrack object with context and actions by using ASO mechanism.
*
* @param[in] dev
* Pointer to rte_eth_dev structure.
* @param[in] pro
* Pointer to conntrack information profile.
* @param[out] error
* Pointer to the error structure.
*
* @return
* Index to conntrack object on success, 0 otherwise.
*/
static uint32_t
flow_dv_translate_create_conntrack(struct rte_eth_dev *dev,
const struct rte_flow_action_conntrack *pro,
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_dev_ctx_shared *sh = priv->sh;
struct mlx5_aso_ct_action *ct;
uint32_t idx;
if (!sh->ct_aso_en)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"Connection is not supported");
idx = flow_dv_aso_ct_alloc(dev, error);
if (!idx)
return rte_flow_error_set(error, rte_errno,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"Failed to allocate CT object");
ct = flow_aso_ct_get_by_dev_idx(dev, idx);
if (mlx5_aso_ct_update_by_wqe(sh, MLX5_HW_INV_QUEUE, ct, pro, NULL, true)) {
flow_dv_aso_ct_dev_release(dev, idx);
rte_flow_error_set(error, EBUSY,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"Failed to update CT");
return 0;
}
ct->is_original = !!pro->is_original_dir;
ct->peer = pro->peer_port;
return idx;
}
/**
* Fill the flow matcher with DV spec.
*
* @param[in] dev
* Pointer to rte_eth_dev structure.
* @param[in] items
* Pointer to the list of items.
* @param[in] wks
* Pointer to the matcher workspace.
* @param[in] key
* Pointer to the flow matcher key.
* @param[in] key_type
* Key type.
* @param[out] error
* Pointer to the error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_translate_items(struct rte_eth_dev *dev,
const struct rte_flow_item *items,
struct mlx5_dv_matcher_workspace *wks,
void *key, uint32_t key_type,
struct rte_flow_error *error)
{
struct mlx5_flow_rss_desc *rss_desc = wks->rss_desc;
uint8_t next_protocol = wks->next_protocol;
int tunnel = !!(wks->item_flags & MLX5_FLOW_LAYER_TUNNEL);
int item_type = items->type;
uint64_t last_item = wks->last_item;
int ret;
switch (item_type) {
case RTE_FLOW_ITEM_TYPE_ESP:
flow_dv_translate_item_esp(key, items, tunnel, key_type);
wks->priority = MLX5_PRIORITY_MAP_L4;
last_item = MLX5_FLOW_ITEM_ESP;
break;
case RTE_FLOW_ITEM_TYPE_PORT_ID:
flow_dv_translate_item_port_id
(dev, key, items, wks->attr, key_type);
last_item = MLX5_FLOW_ITEM_PORT_ID;
break;
case RTE_FLOW_ITEM_TYPE_PORT_REPRESENTOR:
flow_dv_translate_item_port_representor
(dev, key, key_type);
last_item = MLX5_FLOW_ITEM_PORT_REPRESENTOR;
break;
case RTE_FLOW_ITEM_TYPE_REPRESENTED_PORT:
flow_dv_translate_item_represented_port
(dev, key, items, wks->attr, key_type);
last_item = MLX5_FLOW_ITEM_REPRESENTED_PORT;
break;
case RTE_FLOW_ITEM_TYPE_ETH:
flow_dv_translate_item_eth(key, items, tunnel,
wks->group, key_type);
wks->priority = wks->action_flags &
MLX5_FLOW_ACTION_DEFAULT_MISS &&
!wks->external ?
MLX5_PRIORITY_MAP_L3 :
MLX5_PRIORITY_MAP_L2;
last_item = tunnel ? MLX5_FLOW_LAYER_INNER_L2 :
MLX5_FLOW_LAYER_OUTER_L2;
break;
case RTE_FLOW_ITEM_TYPE_VLAN:
flow_dv_translate_item_vlan(key, items, tunnel, wks, key_type);
wks->priority = MLX5_PRIORITY_MAP_L2;
last_item = tunnel ? (MLX5_FLOW_LAYER_INNER_L2 |
MLX5_FLOW_LAYER_INNER_VLAN) :
(MLX5_FLOW_LAYER_OUTER_L2 |
MLX5_FLOW_LAYER_OUTER_VLAN);
break;
case RTE_FLOW_ITEM_TYPE_IPV4:
mlx5_flow_tunnel_ip_check(items, next_protocol,
&wks->item_flags, &tunnel);
flow_dv_translate_item_ipv4(key, items, tunnel,
wks->group, key_type);
wks->priority = MLX5_PRIORITY_MAP_L3;
last_item = tunnel ? MLX5_FLOW_LAYER_INNER_L3_IPV4 :
MLX5_FLOW_LAYER_OUTER_L3_IPV4;
if (items->mask != NULL &&
items->spec != NULL &&
((const struct rte_flow_item_ipv4 *)
items->mask)->hdr.next_proto_id) {
next_protocol =
((const struct rte_flow_item_ipv4 *)
(items->spec))->hdr.next_proto_id;
next_protocol &=
((const struct rte_flow_item_ipv4 *)
(items->mask))->hdr.next_proto_id;
} else if (key_type == MLX5_SET_MATCHER_HS_M &&
items->mask != NULL) {
next_protocol = ((const struct rte_flow_item_ipv4 *)
(items->mask))->hdr.next_proto_id;
} else if (key_type == MLX5_SET_MATCHER_HS_V &&
items->spec != NULL) {
next_protocol = ((const struct rte_flow_item_ipv4 *)
(items->spec))->hdr.next_proto_id;
} else {
/* Reset for inner layer. */
next_protocol = 0xff;
}
break;
case RTE_FLOW_ITEM_TYPE_IPV6:
mlx5_flow_tunnel_ip_check(items, next_protocol,
&wks->item_flags, &tunnel);
flow_dv_translate_item_ipv6(key, items, tunnel,
wks->group, key_type);
wks->priority = MLX5_PRIORITY_MAP_L3;
last_item = tunnel ? MLX5_FLOW_LAYER_INNER_L3_IPV6 :
MLX5_FLOW_LAYER_OUTER_L3_IPV6;
if (items->mask != NULL &&
items->spec != NULL &&
((const struct rte_flow_item_ipv6 *)
items->mask)->hdr.proto) {
next_protocol =
((const struct rte_flow_item_ipv6 *)
items->spec)->hdr.proto;
next_protocol &=
((const struct rte_flow_item_ipv6 *)
items->mask)->hdr.proto;
} else if (key_type == MLX5_SET_MATCHER_HS_M &&
items->mask != NULL) {
next_protocol = ((const struct rte_flow_item_ipv6 *)
(items->mask))->hdr.proto;
} else if (key_type == MLX5_SET_MATCHER_HS_V &&
items->spec != NULL) {
next_protocol = ((const struct rte_flow_item_ipv6 *)
(items->spec))->hdr.proto;
} else {
/* Reset for inner layer. */
next_protocol = 0xff;
}
break;
case RTE_FLOW_ITEM_TYPE_IPV6_FRAG_EXT:
flow_dv_translate_item_ipv6_frag_ext
(key, items, tunnel, key_type);
last_item = tunnel ? MLX5_FLOW_LAYER_INNER_L3_IPV6_FRAG_EXT :
MLX5_FLOW_LAYER_OUTER_L3_IPV6_FRAG_EXT;
if (items->mask != NULL &&
items->spec != NULL &&
((const struct rte_flow_item_ipv6_frag_ext *)
items->mask)->hdr.next_header) {
next_protocol =
((const struct rte_flow_item_ipv6_frag_ext *)
items->spec)->hdr.next_header;
next_protocol &=
((const struct rte_flow_item_ipv6_frag_ext *)
items->mask)->hdr.next_header;
} else if (key_type == MLX5_SET_MATCHER_HS_M &&
items->mask != NULL) {
next_protocol = ((const struct rte_flow_item_ipv6_frag_ext *)
(items->mask))->hdr.next_header;
} else if (key_type == MLX5_SET_MATCHER_HS_V &&
items->spec != NULL) {
next_protocol = ((const struct rte_flow_item_ipv6_frag_ext *)
(items->spec))->hdr.next_header;
} else {
/* Reset for inner layer. */
next_protocol = 0xff;
}
break;
case RTE_FLOW_ITEM_TYPE_TCP:
flow_dv_translate_item_tcp(key, items, tunnel, key_type);
wks->priority = MLX5_PRIORITY_MAP_L4;
last_item = tunnel ? MLX5_FLOW_LAYER_INNER_L4_TCP :
MLX5_FLOW_LAYER_OUTER_L4_TCP;
break;
case RTE_FLOW_ITEM_TYPE_UDP:
flow_dv_translate_item_udp(key, items, tunnel, wks, key_type);
wks->priority = MLX5_PRIORITY_MAP_L4;
last_item = tunnel ? MLX5_FLOW_LAYER_INNER_L4_UDP :
MLX5_FLOW_LAYER_OUTER_L4_UDP;
break;
case RTE_FLOW_ITEM_TYPE_GRE:
wks->priority = MLX5_TUNNEL_PRIO_GET(rss_desc);
wks->tunnel_item = items;
wks->gre_item = items;
last_item = MLX5_FLOW_LAYER_GRE;
break;
case RTE_FLOW_ITEM_TYPE_GRE_KEY:
flow_dv_translate_item_gre_key(key, items, key_type);
last_item = MLX5_FLOW_LAYER_GRE_KEY;
break;
case RTE_FLOW_ITEM_TYPE_GRE_OPTION:
wks->priority = MLX5_TUNNEL_PRIO_GET(rss_desc);
wks->tunnel_item = items;
last_item = MLX5_FLOW_LAYER_GRE;
break;
case RTE_FLOW_ITEM_TYPE_NVGRE:
wks->priority = MLX5_TUNNEL_PRIO_GET(rss_desc);
wks->tunnel_item = items;
last_item = MLX5_FLOW_LAYER_GRE;
break;
case RTE_FLOW_ITEM_TYPE_VXLAN:
flow_dv_translate_item_vxlan(dev, wks->attr, key,
items, tunnel, wks, key_type);
wks->priority = MLX5_TUNNEL_PRIO_GET(rss_desc);
last_item = MLX5_FLOW_LAYER_VXLAN;
break;
case RTE_FLOW_ITEM_TYPE_VXLAN_GPE:
wks->priority = MLX5_TUNNEL_PRIO_GET(rss_desc);
wks->tunnel_item = items;
last_item = MLX5_FLOW_LAYER_VXLAN_GPE;
break;
case RTE_FLOW_ITEM_TYPE_GENEVE:
wks->priority = MLX5_TUNNEL_PRIO_GET(rss_desc);
wks->tunnel_item = items;
last_item = MLX5_FLOW_LAYER_GENEVE;
break;
case RTE_FLOW_ITEM_TYPE_GENEVE_OPT:
ret = flow_dv_translate_item_geneve_opt
(dev, key, items, key_type, error);
if (ret)
return rte_flow_error_set(error, -ret,
RTE_FLOW_ERROR_TYPE_ITEM, NULL,
"cannot create GENEVE TLV option");
wks->geneve_tlv_option = 1;
last_item = MLX5_FLOW_LAYER_GENEVE_OPT;
break;
case RTE_FLOW_ITEM_TYPE_MPLS:
flow_dv_translate_item_mpls(key, items, last_item,
tunnel, key_type);
wks->priority = MLX5_TUNNEL_PRIO_GET(rss_desc);
last_item = MLX5_FLOW_LAYER_MPLS;
break;
case RTE_FLOW_ITEM_TYPE_MARK:
flow_dv_translate_item_mark(dev, key, items, key_type);
last_item = MLX5_FLOW_ITEM_MARK;
break;
case RTE_FLOW_ITEM_TYPE_META:
flow_dv_translate_item_meta
(dev, key, wks->attr, items, key_type);
last_item = MLX5_FLOW_ITEM_METADATA;
break;
case RTE_FLOW_ITEM_TYPE_ICMP:
flow_dv_translate_item_icmp(key, items, tunnel, key_type);
wks->priority = MLX5_PRIORITY_MAP_L4;
last_item = MLX5_FLOW_LAYER_ICMP;
break;
case RTE_FLOW_ITEM_TYPE_ICMP6:
flow_dv_translate_item_icmp6(key, items, tunnel, key_type);
wks->priority = MLX5_PRIORITY_MAP_L4;
last_item = MLX5_FLOW_LAYER_ICMP6;
break;
case RTE_FLOW_ITEM_TYPE_TAG:
flow_dv_translate_item_tag(dev, key, items, key_type);
last_item = MLX5_FLOW_ITEM_TAG;
break;
case MLX5_RTE_FLOW_ITEM_TYPE_TAG:
flow_dv_translate_mlx5_item_tag(dev, key, items, key_type);
last_item = MLX5_FLOW_ITEM_TAG;
break;
case MLX5_RTE_FLOW_ITEM_TYPE_SQ:
flow_dv_translate_item_sq(key, items, key_type);
last_item = MLX5_FLOW_ITEM_SQ;
break;
case RTE_FLOW_ITEM_TYPE_GTP:
flow_dv_translate_item_gtp(key, items, tunnel, key_type);
wks->priority = MLX5_TUNNEL_PRIO_GET(rss_desc);
last_item = MLX5_FLOW_LAYER_GTP;
break;
case RTE_FLOW_ITEM_TYPE_GTP_PSC:
ret = flow_dv_translate_item_gtp_psc(key, items, key_type);
if (ret)
return rte_flow_error_set(error, -ret,
RTE_FLOW_ERROR_TYPE_ITEM, NULL,
"cannot create GTP PSC item");
last_item = MLX5_FLOW_LAYER_GTP_PSC;
break;
case RTE_FLOW_ITEM_TYPE_ECPRI:
if (!mlx5_flex_parser_ecpri_exist(dev)) {
/* Create it only the first time to be used. */
ret = mlx5_flex_parser_ecpri_alloc(dev);
if (ret)
return rte_flow_error_set
(error, -ret,
RTE_FLOW_ERROR_TYPE_ITEM,
NULL,
"cannot create eCPRI parser");
}
flow_dv_translate_item_ecpri
(dev, key, items, last_item, key_type);
/* No other protocol should follow eCPRI layer. */
last_item = MLX5_FLOW_LAYER_ECPRI;
break;
case RTE_FLOW_ITEM_TYPE_METER_COLOR:
flow_dv_translate_item_meter_color(dev, key, items, key_type);
last_item = MLX5_FLOW_ITEM_METER_COLOR;
break;
case RTE_FLOW_ITEM_TYPE_INTEGRITY:
last_item = flow_dv_translate_item_integrity(items,
wks, key_type);
break;
default:
break;
}
wks->item_flags |= last_item;
wks->last_item = last_item;
wks->next_protocol = next_protocol;
return 0;
}
/**
* Fill the HW steering flow with DV spec.
*
* @param[in] items
* Pointer to the list of items.
* @param[in] attr
* Pointer to the flow attributes.
* @param[in] key
* Pointer to the flow matcher key.
* @param[in] key_type
* Key type.
* @param[in, out] item_flags
* Pointer to the flow item flags.
* @param[out] error
* Pointer to the error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
flow_dv_translate_items_hws(const struct rte_flow_item *items,
struct mlx5_flow_attr *attr, void *key,
uint32_t key_type, uint64_t *item_flags,
uint8_t *match_criteria,
struct rte_flow_error *error)
{
struct mlx5_flow_workspace *flow_wks = mlx5_flow_push_thread_workspace();
struct mlx5_flow_rss_desc rss_desc = { .level = attr->rss_level };
struct rte_flow_attr rattr = {
.group = attr->group,
.priority = attr->priority,
.ingress = !!(attr->tbl_type == MLX5DR_TABLE_TYPE_NIC_RX),
.egress = !!(attr->tbl_type == MLX5DR_TABLE_TYPE_NIC_TX),
.transfer = !!(attr->tbl_type == MLX5DR_TABLE_TYPE_FDB),
};
struct mlx5_dv_matcher_workspace wks = {
.action_flags = attr->act_flags,
.item_flags = item_flags ? *item_flags : 0,
.external = 0,
.next_protocol = 0xff,
.attr = &rattr,
.rss_desc = &rss_desc,
};
int ret = 0;
RTE_SET_USED(flow_wks);
for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
if (!mlx5_flow_os_item_supported(items->type)) {
ret = rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM,
NULL, "item not supported");
goto exit;
}
ret = flow_dv_translate_items(&rte_eth_devices[attr->port_id],
items, &wks, key, key_type, NULL);
if (ret)
goto exit;
}
if (wks.item_flags & MLX5_FLOW_ITEM_INTEGRITY) {
flow_dv_translate_item_integrity_post(key,
wks.integrity_items,
wks.item_flags,
key_type);
}
if (wks.item_flags & MLX5_FLOW_LAYER_VXLAN_GPE) {
flow_dv_translate_item_vxlan_gpe(key,
wks.tunnel_item,
wks.item_flags,
key_type);
} else if (wks.item_flags & MLX5_FLOW_LAYER_GENEVE) {
flow_dv_translate_item_geneve(key,
wks.tunnel_item,
wks.item_flags,
key_type);
} else if (wks.item_flags & MLX5_FLOW_LAYER_GRE) {
if (wks.tunnel_item->type == RTE_FLOW_ITEM_TYPE_GRE) {
flow_dv_translate_item_gre(key,
wks.tunnel_item,
wks.item_flags,
key_type);
} else if (wks.tunnel_item->type == RTE_FLOW_ITEM_TYPE_GRE_OPTION) {
flow_dv_translate_item_gre_option(key,
wks.tunnel_item,
wks.gre_item,
wks.item_flags,
key_type);
} else if (wks.tunnel_item->type == RTE_FLOW_ITEM_TYPE_NVGRE) {
flow_dv_translate_item_nvgre(key,
wks.tunnel_item,
wks.item_flags,
key_type);
} else {
MLX5_ASSERT(false);
}
}
if (match_criteria)
*match_criteria = flow_dv_matcher_enable(key);
if (item_flags)
*item_flags = wks.item_flags;
exit:
mlx5_flow_pop_thread_workspace();
return ret;
}
/**
* Fill the SW steering flow with DV spec.
*
* @param[in] dev
* Pointer to rte_eth_dev structure.
* @param[in, out] dev_flow
* Pointer to the sub flow.
* @param[in] attr
* Pointer to the flow attributes.
* @param[in] items
* Pointer to the list of items.
* @param[in, out] matcher
* Pointer to the flow matcher.
* @param[out] error
* Pointer to the error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_translate_items_sws(struct rte_eth_dev *dev,
struct mlx5_flow *dev_flow,
const struct rte_flow_attr *attr,
const struct rte_flow_item *items,
struct mlx5_flow_dv_matcher *matcher,
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
void *match_mask = matcher->mask.buf;
void *match_value = dev_flow->dv.value.buf;
struct mlx5_dv_matcher_workspace wks = {
.action_flags = dev_flow->act_flags,
.item_flags = 0,
.external = dev_flow->external,
.next_protocol = 0xff,
.group = dev_flow->dv.group,
.attr = attr,
.rss_desc = &((struct mlx5_flow_workspace *)
mlx5_flow_get_thread_workspace())->rss_desc,
};
struct mlx5_dv_matcher_workspace wks_m = wks;
int item_type;
int ret = 0;
int tunnel;
for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
if (!mlx5_flow_os_item_supported(items->type))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM,
NULL, "item not supported");
tunnel = !!(wks.item_flags & MLX5_FLOW_LAYER_TUNNEL);
item_type = items->type;
switch (item_type) {
case RTE_FLOW_ITEM_TYPE_CONNTRACK:
flow_dv_translate_item_aso_ct(dev, match_mask,
match_value, items);
break;
case RTE_FLOW_ITEM_TYPE_FLEX:
flow_dv_translate_item_flex(dev, match_mask,
match_value, items,
dev_flow, tunnel != 0);
wks.last_item = tunnel ? MLX5_FLOW_ITEM_INNER_FLEX :
MLX5_FLOW_ITEM_OUTER_FLEX;
break;
case MLX5_RTE_FLOW_ITEM_TYPE_SQ:
flow_dv_translate_item_sq(match_value, items,
MLX5_SET_MATCHER_SW_V);
flow_dv_translate_item_sq(match_mask, items,
MLX5_SET_MATCHER_SW_M);
break;
default:
ret = flow_dv_translate_items(dev, items, &wks_m,
match_mask, MLX5_SET_MATCHER_SW_M, error);
if (ret)
return ret;
ret = flow_dv_translate_items(dev, items, &wks,
match_value, MLX5_SET_MATCHER_SW_V, error);
if (ret)
return ret;
break;
}
wks.item_flags |= wks.last_item;
}
/*
* When E-Switch mode is enabled, we have two cases where we need to
* set the source port manually.
* The first one, is in case of NIC ingress steering rule, and the
* second is E-Switch rule where no port_id item was found.
* In both cases the source port is set according the current port
* in use.
*/
if (!(wks.item_flags & MLX5_FLOW_ITEM_PORT_ID) &&
!(wks.item_flags & MLX5_FLOW_ITEM_REPRESENTED_PORT) &&
!(wks.item_flags & MLX5_FLOW_ITEM_PORT_REPRESENTOR) &&
priv->sh->esw_mode &&
!(attr->egress && !attr->transfer) &&
attr->group != MLX5_FLOW_MREG_CP_TABLE_GROUP) {
if (flow_dv_translate_item_port_id_all(dev, match_mask,
match_value, NULL, attr))
return -rte_errno;
}
if (wks.item_flags & MLX5_FLOW_ITEM_INTEGRITY) {
flow_dv_translate_item_integrity_post(match_mask,
wks_m.integrity_items,
wks_m.item_flags,
MLX5_SET_MATCHER_SW_M);
flow_dv_translate_item_integrity_post(match_value,
wks.integrity_items,
wks.item_flags,
MLX5_SET_MATCHER_SW_V);
}
if (wks.item_flags & MLX5_FLOW_LAYER_VXLAN_GPE) {
flow_dv_translate_item_vxlan_gpe(match_mask,
wks.tunnel_item,
wks.item_flags,
MLX5_SET_MATCHER_SW_M);
flow_dv_translate_item_vxlan_gpe(match_value,
wks.tunnel_item,
wks.item_flags,
MLX5_SET_MATCHER_SW_V);
} else if (wks.item_flags & MLX5_FLOW_LAYER_GENEVE) {
flow_dv_translate_item_geneve(match_mask,
wks.tunnel_item,
wks.item_flags,
MLX5_SET_MATCHER_SW_M);
flow_dv_translate_item_geneve(match_value,
wks.tunnel_item,
wks.item_flags,
MLX5_SET_MATCHER_SW_V);
} else if (wks.item_flags & MLX5_FLOW_LAYER_GRE) {
if (wks.tunnel_item->type == RTE_FLOW_ITEM_TYPE_GRE) {
flow_dv_translate_item_gre(match_mask,
wks.tunnel_item,
wks.item_flags,
MLX5_SET_MATCHER_SW_M);
flow_dv_translate_item_gre(match_value,
wks.tunnel_item,
wks.item_flags,
MLX5_SET_MATCHER_SW_V);
} else if (wks.tunnel_item->type == RTE_FLOW_ITEM_TYPE_NVGRE) {
flow_dv_translate_item_nvgre(match_mask,
wks.tunnel_item,
wks.item_flags,
MLX5_SET_MATCHER_SW_M);
flow_dv_translate_item_nvgre(match_value,
wks.tunnel_item,
wks.item_flags,
MLX5_SET_MATCHER_SW_V);
} else if (wks.tunnel_item->type == RTE_FLOW_ITEM_TYPE_GRE_OPTION) {
flow_dv_translate_item_gre_option(match_mask,
wks.tunnel_item,
wks.gre_item,
wks.item_flags,
MLX5_SET_MATCHER_SW_M);
flow_dv_translate_item_gre_option(match_value,
wks.tunnel_item,
wks.gre_item,
wks.item_flags,
MLX5_SET_MATCHER_SW_V);
} else {
MLX5_ASSERT(false);
}
}
dev_flow->handle->vf_vlan.tag = wks.vlan_tag;
matcher->priority = wks.priority;
#ifdef RTE_LIBRTE_MLX5_DEBUG
MLX5_ASSERT(!flow_dv_check_valid_spec(match_mask, match_value));
#endif
/*
* Layers may be already initialized from prefix flow if this dev_flow
* is the suffix flow.
*/
dev_flow->handle->layers |= wks.item_flags;
dev_flow->flow->geneve_tlv_option = wks.geneve_tlv_option;
return 0;
}
/**
* Fill the flow with DV spec, lock free
* (mutex should be acquired by caller).
*
* @param[in] dev
* Pointer to rte_eth_dev structure.
* @param[in, out] dev_flow
* Pointer to the sub flow.
* @param[in] attr
* Pointer to the flow attributes.
* @param[in] items
* Pointer to the list of items.
* @param[in] actions
* Pointer to the list of actions.
* @param[out] error
* Pointer to the error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_translate(struct rte_eth_dev *dev,
struct mlx5_flow *dev_flow,
const struct rte_flow_attr *attr,
const struct rte_flow_item items[],
const struct rte_flow_action actions[],
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_sh_config *dev_conf = &priv->sh->config;
struct rte_flow *flow = dev_flow->flow;
struct mlx5_flow_handle *handle = dev_flow->handle;
struct mlx5_flow_workspace *wks = mlx5_flow_get_thread_workspace();
struct mlx5_flow_rss_desc *rss_desc;
uint64_t action_flags = 0;
struct mlx5_flow_dv_matcher matcher = {
.mask = {
.size = sizeof(matcher.mask.buf),
},
};
int actions_n = 0;
bool actions_end = false;
union {
struct mlx5_flow_dv_modify_hdr_resource res;
uint8_t len[sizeof(struct mlx5_flow_dv_modify_hdr_resource) +
sizeof(struct mlx5_modification_cmd) *
(MLX5_MAX_MODIFY_NUM + 1)];
} mhdr_dummy;
struct mlx5_flow_dv_modify_hdr_resource *mhdr_res = &mhdr_dummy.res;
const struct rte_flow_action_count *count = NULL;
const struct rte_flow_action_age *non_shared_age = NULL;
union flow_dv_attr flow_attr = { .attr = 0 };
uint32_t tag_be;
union mlx5_flow_tbl_key tbl_key;
uint32_t modify_action_position = UINT32_MAX;
struct rte_vlan_hdr vlan = { 0 };
struct mlx5_flow_dv_dest_array_resource mdest_res;
struct mlx5_flow_dv_sample_resource sample_res;
void *sample_actions[MLX5_DV_MAX_NUMBER_OF_ACTIONS] = {0};
const struct rte_flow_action_sample *sample = NULL;
struct mlx5_flow_sub_actions_list *sample_act;
uint32_t sample_act_pos = UINT32_MAX;
uint32_t age_act_pos = UINT32_MAX;
uint32_t num_of_dest = 0;
int tmp_actions_n = 0;
uint32_t table;
int ret = 0;
const struct mlx5_flow_tunnel *tunnel = NULL;
struct flow_grp_info grp_info = {
.external = !!dev_flow->external,
.transfer = !!attr->transfer,
.fdb_def_rule = !!priv->fdb_def_rule,
.skip_scale = dev_flow->skip_scale &
(1 << MLX5_SCALE_FLOW_GROUP_BIT),
.std_tbl_fix = true,
};
if (!wks)
return rte_flow_error_set(error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"failed to push flow workspace");
rss_desc = &wks->rss_desc;
memset(&mdest_res, 0, sizeof(struct mlx5_flow_dv_dest_array_resource));
memset(&sample_res, 0, sizeof(struct mlx5_flow_dv_sample_resource));
mhdr_res->ft_type = attr->egress ? MLX5DV_FLOW_TABLE_TYPE_NIC_TX :
MLX5DV_FLOW_TABLE_TYPE_NIC_RX;
/* update normal path action resource into last index of array */
sample_act = &mdest_res.sample_act[MLX5_MAX_DEST_NUM - 1];
if (is_tunnel_offload_active(dev)) {
if (dev_flow->tunnel) {
RTE_VERIFY(dev_flow->tof_type ==
MLX5_TUNNEL_OFFLOAD_MISS_RULE);
tunnel = dev_flow->tunnel;
} else {
tunnel = mlx5_get_tof(items, actions,
&dev_flow->tof_type);
dev_flow->tunnel = tunnel;
}
grp_info.std_tbl_fix = tunnel_use_standard_attr_group_translate
(dev, attr, tunnel, dev_flow->tof_type);
}
mhdr_res->ft_type = attr->egress ? MLX5DV_FLOW_TABLE_TYPE_NIC_TX :
MLX5DV_FLOW_TABLE_TYPE_NIC_RX;
ret = mlx5_flow_group_to_table(dev, tunnel, attr->group, &table,
&grp_info, error);
if (ret)
return ret;
dev_flow->dv.group = table;
if (attr->transfer)
mhdr_res->ft_type = MLX5DV_FLOW_TABLE_TYPE_FDB;
/* number of actions must be set to 0 in case of dirty stack. */
mhdr_res->actions_num = 0;
if (is_flow_tunnel_match_rule(dev_flow->tof_type)) {
/*
* do not add decap action if match rule drops packet
* HW rejects rules with decap & drop
*
* if tunnel match rule was inserted before matching tunnel set
* rule flow table used in the match rule must be registered.
* current implementation handles that in the
* flow_dv_match_register() at the function end.
*/
bool add_decap = true;
const struct rte_flow_action *ptr = actions;
for (; ptr->type != RTE_FLOW_ACTION_TYPE_END; ptr++) {
if (ptr->type == RTE_FLOW_ACTION_TYPE_DROP) {
add_decap = false;
break;
}
}
if (add_decap) {
if (flow_dv_create_action_l2_decap(dev, dev_flow,
attr->transfer,
error))
return -rte_errno;
dev_flow->dv.actions[actions_n++] =
dev_flow->dv.encap_decap->action;
action_flags |= MLX5_FLOW_ACTION_DECAP;
}
}
for (; !actions_end ; actions++) {
const struct rte_flow_action_queue *queue;
const struct rte_flow_action_rss *rss;
const struct rte_flow_action *action = actions;
const uint8_t *rss_key;
struct mlx5_flow_tbl_resource *tbl;
struct mlx5_aso_age_action *age_act;
struct mlx5_flow_counter *cnt_act;
uint32_t port_id = 0;
struct mlx5_flow_dv_port_id_action_resource port_id_resource;
int action_type = actions->type;
const struct rte_flow_action *found_action = NULL;
uint32_t jump_group = 0;
uint32_t owner_idx;
struct mlx5_aso_ct_action *ct;
if (!mlx5_flow_os_action_supported(action_type))
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
actions,
"action not supported");
switch (action_type) {
case MLX5_RTE_FLOW_ACTION_TYPE_TUNNEL_SET:
action_flags |= MLX5_FLOW_ACTION_TUNNEL_SET;
break;
case RTE_FLOW_ACTION_TYPE_VOID:
break;
case RTE_FLOW_ACTION_TYPE_PORT_ID:
case RTE_FLOW_ACTION_TYPE_REPRESENTED_PORT:
if (flow_dv_translate_action_port_id(dev, action,
&port_id, error))
return -rte_errno;
port_id_resource.port_id = port_id;
MLX5_ASSERT(!handle->rix_port_id_action);
if (flow_dv_port_id_action_resource_register
(dev, &port_id_resource, dev_flow, error))
return -rte_errno;
dev_flow->dv.actions[actions_n++] =
dev_flow->dv.port_id_action->action;
action_flags |= MLX5_FLOW_ACTION_PORT_ID;
dev_flow->handle->fate_action = MLX5_FLOW_FATE_PORT_ID;
sample_act->action_flags |= MLX5_FLOW_ACTION_PORT_ID;
num_of_dest++;
break;
case RTE_FLOW_ACTION_TYPE_FLAG:
action_flags |= MLX5_FLOW_ACTION_FLAG;
wks->mark = 1;
if (dev_conf->dv_xmeta_en != MLX5_XMETA_MODE_LEGACY) {
struct rte_flow_action_mark mark = {
.id = MLX5_FLOW_MARK_DEFAULT,
};
if (flow_dv_convert_action_mark(dev, &mark,
mhdr_res,
error))
return -rte_errno;
action_flags |= MLX5_FLOW_ACTION_MARK_EXT;
break;
}
tag_be = mlx5_flow_mark_set(MLX5_FLOW_MARK_DEFAULT);
/*
* Only one FLAG or MARK is supported per device flow
* right now. So the pointer to the tag resource must be
* zero before the register process.
*/
MLX5_ASSERT(!handle->dvh.rix_tag);
if (flow_dv_tag_resource_register(dev, tag_be,
dev_flow, error))
return -rte_errno;
MLX5_ASSERT(dev_flow->dv.tag_resource);
dev_flow->dv.actions[actions_n++] =
dev_flow->dv.tag_resource->action;
break;
case RTE_FLOW_ACTION_TYPE_MARK:
action_flags |= MLX5_FLOW_ACTION_MARK;
wks->mark = 1;
if (dev_conf->dv_xmeta_en != MLX5_XMETA_MODE_LEGACY) {
const struct rte_flow_action_mark *mark =
(const struct rte_flow_action_mark *)
actions->conf;
if (flow_dv_convert_action_mark(dev, mark,
mhdr_res,
error))
return -rte_errno;
action_flags |= MLX5_FLOW_ACTION_MARK_EXT;
break;
}
/* Fall-through */
case MLX5_RTE_FLOW_ACTION_TYPE_MARK:
/* Legacy (non-extensive) MARK action. */
tag_be = mlx5_flow_mark_set
(((const struct rte_flow_action_mark *)
(actions->conf))->id);
MLX5_ASSERT(!handle->dvh.rix_tag);
if (flow_dv_tag_resource_register(dev, tag_be,
dev_flow, error))
return -rte_errno;
MLX5_ASSERT(dev_flow->dv.tag_resource);
dev_flow->dv.actions[actions_n++] =
dev_flow->dv.tag_resource->action;
break;
case RTE_FLOW_ACTION_TYPE_SET_META:
if (flow_dv_convert_action_set_meta
(dev, mhdr_res, attr,
(const struct rte_flow_action_set_meta *)
actions->conf, error))
return -rte_errno;
action_flags |= MLX5_FLOW_ACTION_SET_META;
break;
case RTE_FLOW_ACTION_TYPE_SET_TAG:
if (flow_dv_convert_action_set_tag
(dev, mhdr_res,
(const struct rte_flow_action_set_tag *)
actions->conf, error))
return -rte_errno;
action_flags |= MLX5_FLOW_ACTION_SET_TAG;
break;
case RTE_FLOW_ACTION_TYPE_DROP:
action_flags |= MLX5_FLOW_ACTION_DROP;
dev_flow->handle->fate_action = MLX5_FLOW_FATE_DROP;
break;
case RTE_FLOW_ACTION_TYPE_QUEUE:
queue = actions->conf;
rss_desc->queue_num = 1;
rss_desc->queue[0] = queue->index;
action_flags |= MLX5_FLOW_ACTION_QUEUE;
dev_flow->handle->fate_action = MLX5_FLOW_FATE_QUEUE;
sample_act->action_flags |= MLX5_FLOW_ACTION_QUEUE;
num_of_dest++;
break;
case RTE_FLOW_ACTION_TYPE_RSS:
rss = actions->conf;
memcpy(rss_desc->queue, rss->queue,
rss->queue_num * sizeof(uint16_t));
rss_desc->queue_num = rss->queue_num;
/* NULL RSS key indicates default RSS key. */
rss_key = !rss->key ? rss_hash_default_key : rss->key;
memcpy(rss_desc->key, rss_key, MLX5_RSS_HASH_KEY_LEN);
/*
* rss->level and rss.types should be set in advance
* when expanding items for RSS.
*/
action_flags |= MLX5_FLOW_ACTION_RSS;
dev_flow->handle->fate_action = rss_desc->shared_rss ?
MLX5_FLOW_FATE_SHARED_RSS :
MLX5_FLOW_FATE_QUEUE;
break;
case MLX5_RTE_FLOW_ACTION_TYPE_AGE:
owner_idx = (uint32_t)(uintptr_t)action->conf;
age_act = flow_aso_age_get_by_idx(dev, owner_idx);
if (flow->age == 0) {
flow->age = owner_idx;
__atomic_fetch_add(&age_act->refcnt, 1,
__ATOMIC_RELAXED);
}
age_act_pos = actions_n++;
action_flags |= MLX5_FLOW_ACTION_AGE;
break;
case RTE_FLOW_ACTION_TYPE_SEND_TO_KERNEL:
dev_flow->dv.actions[actions_n] =
flow_dv_translate_action_send_to_kernel(dev,
error);
if (!dev_flow->dv.actions[actions_n])
return -rte_errno;
actions_n++;
action_flags |= MLX5_FLOW_ACTION_SEND_TO_KERNEL;
dev_flow->handle->fate_action =
MLX5_FLOW_FATE_SEND_TO_KERNEL;
break;
case RTE_FLOW_ACTION_TYPE_AGE:
non_shared_age = action->conf;
age_act_pos = actions_n++;
action_flags |= MLX5_FLOW_ACTION_AGE;
break;
case MLX5_RTE_FLOW_ACTION_TYPE_COUNT:
owner_idx = (uint32_t)(uintptr_t)action->conf;
cnt_act = flow_dv_counter_get_by_idx(dev, owner_idx,
NULL);
MLX5_ASSERT(cnt_act != NULL);
/**
* When creating meter drop flow in drop table, the
* counter should not overwrite the rte flow counter.
*/
if (attr->group == MLX5_FLOW_TABLE_LEVEL_METER &&
dev_flow->dv.table_id == MLX5_MTR_TABLE_ID_DROP) {
dev_flow->dv.actions[actions_n++] =
cnt_act->action;
} else {
if (flow->counter == 0) {
flow->counter = owner_idx;
__atomic_fetch_add
(&cnt_act->shared_info.refcnt,
1, __ATOMIC_RELAXED);
}
/* Save information first, will apply later. */
action_flags |= MLX5_FLOW_ACTION_COUNT;
}
break;
case RTE_FLOW_ACTION_TYPE_COUNT:
if (!priv->sh->cdev->config.devx) {
return rte_flow_error_set
(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"count action not supported");
}
/* Save information first, will apply later. */
count = action->conf;
action_flags |= MLX5_FLOW_ACTION_COUNT;
break;
case RTE_FLOW_ACTION_TYPE_OF_POP_VLAN:
dev_flow->dv.actions[actions_n++] =
priv->sh->pop_vlan_action;
action_flags |= MLX5_FLOW_ACTION_OF_POP_VLAN;
break;
case RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN:
if (!(action_flags &
MLX5_FLOW_ACTION_OF_SET_VLAN_VID))
flow_dev_get_vlan_info_from_items(items, &vlan);
vlan.eth_proto = rte_be_to_cpu_16
((((const struct rte_flow_action_of_push_vlan *)
actions->conf)->ethertype));
found_action = mlx5_flow_find_action
(actions + 1,
RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID);
if (found_action)
mlx5_update_vlan_vid_pcp(found_action, &vlan);
found_action = mlx5_flow_find_action
(actions + 1,
RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP);
if (found_action)
mlx5_update_vlan_vid_pcp(found_action, &vlan);
if (flow_dv_create_action_push_vlan
(dev, attr, &vlan, dev_flow, error))
return -rte_errno;
dev_flow->dv.actions[actions_n++] =
dev_flow->dv.push_vlan_res->action;
action_flags |= MLX5_FLOW_ACTION_OF_PUSH_VLAN;
break;
case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP:
/* of_vlan_push action handled this action */
MLX5_ASSERT(action_flags &
MLX5_FLOW_ACTION_OF_PUSH_VLAN);
break;
case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID:
if (action_flags & MLX5_FLOW_ACTION_OF_PUSH_VLAN)
break;
flow_dev_get_vlan_info_from_items(items, &vlan);
mlx5_update_vlan_vid_pcp(actions, &vlan);
/* If no VLAN push - this is a modify header action */
if (flow_dv_convert_action_modify_vlan_vid
(mhdr_res, actions, error))
return -rte_errno;
action_flags |= MLX5_FLOW_ACTION_OF_SET_VLAN_VID;
break;
case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP:
case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP:
if (flow_dv_create_action_l2_encap(dev, actions,
dev_flow,
attr->transfer,
error))
return -rte_errno;
dev_flow->dv.actions[actions_n++] =
dev_flow->dv.encap_decap->action;
action_flags |= MLX5_FLOW_ACTION_ENCAP;
if (action_flags & MLX5_FLOW_ACTION_SAMPLE)
sample_act->action_flags |=
MLX5_FLOW_ACTION_ENCAP;
break;
case RTE_FLOW_ACTION_TYPE_VXLAN_DECAP:
case RTE_FLOW_ACTION_TYPE_NVGRE_DECAP:
if (flow_dv_create_action_l2_decap(dev, dev_flow,
attr->transfer,
error))
return -rte_errno;
dev_flow->dv.actions[actions_n++] =
dev_flow->dv.encap_decap->action;
action_flags |= MLX5_FLOW_ACTION_DECAP;
break;
case RTE_FLOW_ACTION_TYPE_RAW_ENCAP:
/* Handle encap with preceding decap. */
if (action_flags & MLX5_FLOW_ACTION_DECAP) {
if (flow_dv_create_action_raw_encap
(dev, actions, dev_flow, attr, error))
return -rte_errno;
dev_flow->dv.actions[actions_n++] =
dev_flow->dv.encap_decap->action;
} else {
/* Handle encap without preceding decap. */
if (flow_dv_create_action_l2_encap
(dev, actions, dev_flow, attr->transfer,
error))
return -rte_errno;
dev_flow->dv.actions[actions_n++] =
dev_flow->dv.encap_decap->action;
}
action_flags |= MLX5_FLOW_ACTION_ENCAP;
if (action_flags & MLX5_FLOW_ACTION_SAMPLE)
sample_act->action_flags |=
MLX5_FLOW_ACTION_ENCAP;
break;
case RTE_FLOW_ACTION_TYPE_RAW_DECAP:
while ((++action)->type == RTE_FLOW_ACTION_TYPE_VOID)
;
if (action->type != RTE_FLOW_ACTION_TYPE_RAW_ENCAP) {
if (flow_dv_create_action_l2_decap
(dev, dev_flow, attr->transfer, error))
return -rte_errno;
dev_flow->dv.actions[actions_n++] =
dev_flow->dv.encap_decap->action;
}
/* If decap is followed by encap, handle it at encap. */
action_flags |= MLX5_FLOW_ACTION_DECAP;
break;
case MLX5_RTE_FLOW_ACTION_TYPE_JUMP:
dev_flow->dv.actions[actions_n++] =
(void *)(uintptr_t)action->conf;
action_flags |= MLX5_FLOW_ACTION_JUMP;
break;
case RTE_FLOW_ACTION_TYPE_JUMP:
jump_group = ((const struct rte_flow_action_jump *)
action->conf)->group;
grp_info.std_tbl_fix = 0;
if (dev_flow->skip_scale &
(1 << MLX5_SCALE_JUMP_FLOW_GROUP_BIT))
grp_info.skip_scale = 1;
else
grp_info.skip_scale = 0;
ret = mlx5_flow_group_to_table(dev, tunnel,
jump_group,
&table,
&grp_info, error);
if (ret)
return ret;
tbl = flow_dv_tbl_resource_get(dev, table, attr->egress,
attr->transfer,
!!dev_flow->external,
tunnel, jump_group, 0,
0, error);
if (!tbl)
return rte_flow_error_set
(error, errno,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"cannot create jump action.");
if (flow_dv_jump_tbl_resource_register
(dev, tbl, dev_flow, error)) {
flow_dv_tbl_resource_release(MLX5_SH(dev), tbl);
return rte_flow_error_set
(error, errno,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"cannot create jump action.");
}
dev_flow->dv.actions[actions_n++] =
dev_flow->dv.jump->action;
action_flags |= MLX5_FLOW_ACTION_JUMP;
dev_flow->handle->fate_action = MLX5_FLOW_FATE_JUMP;
sample_act->action_flags |= MLX5_FLOW_ACTION_JUMP;
num_of_dest++;
break;
case RTE_FLOW_ACTION_TYPE_SET_MAC_SRC:
case RTE_FLOW_ACTION_TYPE_SET_MAC_DST:
if (flow_dv_convert_action_modify_mac
(mhdr_res, actions, error))
return -rte_errno;
action_flags |= actions->type ==
RTE_FLOW_ACTION_TYPE_SET_MAC_SRC ?
MLX5_FLOW_ACTION_SET_MAC_SRC :
MLX5_FLOW_ACTION_SET_MAC_DST;
break;
case RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC:
case RTE_FLOW_ACTION_TYPE_SET_IPV4_DST:
if (flow_dv_convert_action_modify_ipv4
(mhdr_res, actions, error))
return -rte_errno;
action_flags |= actions->type ==
RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC ?
MLX5_FLOW_ACTION_SET_IPV4_SRC :
MLX5_FLOW_ACTION_SET_IPV4_DST;
break;
case RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC:
case RTE_FLOW_ACTION_TYPE_SET_IPV6_DST:
if (flow_dv_convert_action_modify_ipv6
(mhdr_res, actions, error))
return -rte_errno;
action_flags |= actions->type ==
RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC ?
MLX5_FLOW_ACTION_SET_IPV6_SRC :
MLX5_FLOW_ACTION_SET_IPV6_DST;
break;
case RTE_FLOW_ACTION_TYPE_SET_TP_SRC:
case RTE_FLOW_ACTION_TYPE_SET_TP_DST:
if (flow_dv_convert_action_modify_tp
(mhdr_res, actions, items,
&flow_attr, dev_flow, !!(action_flags &
MLX5_FLOW_ACTION_DECAP), error))
return -rte_errno;
action_flags |= actions->type ==
RTE_FLOW_ACTION_TYPE_SET_TP_SRC ?
MLX5_FLOW_ACTION_SET_TP_SRC :
MLX5_FLOW_ACTION_SET_TP_DST;
break;
case RTE_FLOW_ACTION_TYPE_DEC_TTL:
if (flow_dv_convert_action_modify_dec_ttl
(mhdr_res, items, &flow_attr, dev_flow,
!!(action_flags &
MLX5_FLOW_ACTION_DECAP), error))
return -rte_errno;
action_flags |= MLX5_FLOW_ACTION_DEC_TTL;
break;
case RTE_FLOW_ACTION_TYPE_SET_TTL:
if (flow_dv_convert_action_modify_ttl
(mhdr_res, actions, items, &flow_attr,
dev_flow, !!(action_flags &
MLX5_FLOW_ACTION_DECAP), error))
return -rte_errno;
action_flags |= MLX5_FLOW_ACTION_SET_TTL;
break;
case RTE_FLOW_ACTION_TYPE_INC_TCP_SEQ:
case RTE_FLOW_ACTION_TYPE_DEC_TCP_SEQ:
if (flow_dv_convert_action_modify_tcp_seq
(mhdr_res, actions, error))
return -rte_errno;
action_flags |= actions->type ==
RTE_FLOW_ACTION_TYPE_INC_TCP_SEQ ?
MLX5_FLOW_ACTION_INC_TCP_SEQ :
MLX5_FLOW_ACTION_DEC_TCP_SEQ;
break;
case RTE_FLOW_ACTION_TYPE_INC_TCP_ACK:
case RTE_FLOW_ACTION_TYPE_DEC_TCP_ACK:
if (flow_dv_convert_action_modify_tcp_ack
(mhdr_res, actions, error))
return -rte_errno;
action_flags |= actions->type ==
RTE_FLOW_ACTION_TYPE_INC_TCP_ACK ?
MLX5_FLOW_ACTION_INC_TCP_ACK :
MLX5_FLOW_ACTION_DEC_TCP_ACK;
break;
case MLX5_RTE_FLOW_ACTION_TYPE_TAG:
if (flow_dv_convert_action_set_reg
(mhdr_res, actions, error))
return -rte_errno;
action_flags |= MLX5_FLOW_ACTION_SET_TAG;
break;
case MLX5_RTE_FLOW_ACTION_TYPE_COPY_MREG:
if (flow_dv_convert_action_copy_mreg
(dev, mhdr_res, actions, error))
return -rte_errno;
action_flags |= MLX5_FLOW_ACTION_SET_TAG;
break;
case MLX5_RTE_FLOW_ACTION_TYPE_DEFAULT_MISS:
action_flags |= MLX5_FLOW_ACTION_DEFAULT_MISS;
dev_flow->handle->fate_action =
MLX5_FLOW_FATE_DEFAULT_MISS;
break;
case RTE_FLOW_ACTION_TYPE_METER:
if (!wks->fm)
return rte_flow_error_set(error, rte_errno,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL, "Failed to get meter in flow.");
/* Set the meter action. */
dev_flow->dv.actions[actions_n++] =
wks->fm->meter_action_g;
action_flags |= MLX5_FLOW_ACTION_METER;
break;
case RTE_FLOW_ACTION_TYPE_SET_IPV4_DSCP:
if (flow_dv_convert_action_modify_ipv4_dscp(mhdr_res,
actions, error))
return -rte_errno;
action_flags |= MLX5_FLOW_ACTION_SET_IPV4_DSCP;
break;
case RTE_FLOW_ACTION_TYPE_SET_IPV6_DSCP:
if (flow_dv_convert_action_modify_ipv6_dscp(mhdr_res,
actions, error))
return -rte_errno;
action_flags |= MLX5_FLOW_ACTION_SET_IPV6_DSCP;
break;
case RTE_FLOW_ACTION_TYPE_SAMPLE:
sample_act_pos = actions_n;
sample = (const struct rte_flow_action_sample *)
action->conf;
actions_n++;
action_flags |= MLX5_FLOW_ACTION_SAMPLE;
/* put encap action into group if work with port id */
if ((action_flags & MLX5_FLOW_ACTION_ENCAP) &&
(action_flags & MLX5_FLOW_ACTION_PORT_ID))
sample_act->action_flags |=
MLX5_FLOW_ACTION_ENCAP;
break;
case RTE_FLOW_ACTION_TYPE_MODIFY_FIELD:
if (flow_dv_convert_action_modify_field
(dev, mhdr_res, actions, attr, error))
return -rte_errno;
action_flags |= MLX5_FLOW_ACTION_MODIFY_FIELD;
break;
case RTE_FLOW_ACTION_TYPE_CONNTRACK:
owner_idx = (uint32_t)(uintptr_t)action->conf;
ct = flow_aso_ct_get_by_idx(dev, owner_idx);
if (!ct)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"Failed to get CT object.");
if (mlx5_aso_ct_available(priv->sh, MLX5_HW_INV_QUEUE, ct))
return rte_flow_error_set(error, rte_errno,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"CT is unavailable.");
if (ct->is_original)
dev_flow->dv.actions[actions_n] =
ct->dr_action_orig;
else
dev_flow->dv.actions[actions_n] =
ct->dr_action_rply;
if (flow->ct == 0) {
flow->indirect_type =
MLX5_INDIRECT_ACTION_TYPE_CT;
flow->ct = owner_idx;
__atomic_fetch_add(&ct->refcnt, 1,
__ATOMIC_RELAXED);
}
actions_n++;
action_flags |= MLX5_FLOW_ACTION_CT;
break;
case RTE_FLOW_ACTION_TYPE_END:
actions_end = true;
if (mhdr_res->actions_num) {
/* create modify action if needed. */
if (flow_dv_modify_hdr_resource_register
(dev, mhdr_res, dev_flow, error))
return -rte_errno;
dev_flow->dv.actions[modify_action_position] =
handle->dvh.modify_hdr->action;
}
/*
* Handle AGE and COUNT action by single HW counter
* when they are not shared.
*/
if (action_flags & MLX5_FLOW_ACTION_AGE) {
if ((non_shared_age && count) ||
!flow_hit_aso_supported(priv, !dev_flow->dv.group)) {
/* Creates age by counters. */
cnt_act = flow_dv_prepare_counter
(dev, dev_flow,
flow, count,
non_shared_age,
error);
if (!cnt_act)
return -rte_errno;
dev_flow->dv.actions[age_act_pos] =
cnt_act->action;
break;
}
if (!flow->age && non_shared_age) {
flow->age = flow_dv_aso_age_alloc
(dev, error);
if (!flow->age)
return -rte_errno;
flow_dv_aso_age_params_init
(dev, flow->age,
non_shared_age->context ?
non_shared_age->context :
(void *)(uintptr_t)
(dev_flow->flow_idx),
non_shared_age->timeout);
}
age_act = flow_aso_age_get_by_idx(dev,
flow->age);
dev_flow->dv.actions[age_act_pos] =
age_act->dr_action;
}
if (action_flags & MLX5_FLOW_ACTION_COUNT) {
/*
* Create one count action, to be used
* by all sub-flows.
*/
cnt_act = flow_dv_prepare_counter(dev, dev_flow,
flow, count,
NULL, error);
if (!cnt_act)
return -rte_errno;
dev_flow->dv.actions[actions_n++] =
cnt_act->action;
}
default:
break;
}
if (mhdr_res->actions_num &&
modify_action_position == UINT32_MAX)
modify_action_position = actions_n++;
}
dev_flow->act_flags = action_flags;
ret = flow_dv_translate_items_sws(dev, dev_flow, attr, items, &matcher,
error);
if (ret)
return -rte_errno;
if (action_flags & MLX5_FLOW_ACTION_RSS)
flow_dv_hashfields_set(dev_flow->handle->layers,
rss_desc,
&dev_flow->hash_fields);
/* If has RSS action in the sample action, the Sample/Mirror resource
* should be registered after the hash filed be update.
*/
if (action_flags & MLX5_FLOW_ACTION_SAMPLE) {
ret = flow_dv_translate_action_sample(dev,
sample,
dev_flow, attr,
&num_of_dest,
sample_actions,
&sample_res,
error);
if (ret < 0)
return ret;
ret = flow_dv_create_action_sample(dev,
dev_flow,
num_of_dest,
&sample_res,
&mdest_res,
sample_actions,
action_flags,
error);
if (ret < 0)
return rte_flow_error_set
(error, rte_errno,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"cannot create sample action");
if (num_of_dest > 1) {
dev_flow->dv.actions[sample_act_pos] =
dev_flow->dv.dest_array_res->action;
} else {
dev_flow->dv.actions[sample_act_pos] =
dev_flow->dv.sample_res->verbs_action;
}
}
/*
* For multiple destination (sample action with ratio=1), the encap
* action and port id action will be combined into group action.
* So need remove the original these actions in the flow and only
* use the sample action instead of.
*/
if (num_of_dest > 1 &&
(sample_act->dr_port_id_action || sample_act->dr_jump_action)) {
int i;
void *temp_actions[MLX5_DV_MAX_NUMBER_OF_ACTIONS] = {0};
for (i = 0; i < actions_n; i++) {
if ((sample_act->dr_encap_action &&
sample_act->dr_encap_action ==
dev_flow->dv.actions[i]) ||
(sample_act->dr_port_id_action &&
sample_act->dr_port_id_action ==
dev_flow->dv.actions[i]) ||
(sample_act->dr_jump_action &&
sample_act->dr_jump_action ==
dev_flow->dv.actions[i]))
continue;
temp_actions[tmp_actions_n++] = dev_flow->dv.actions[i];
}
memcpy((void *)dev_flow->dv.actions,
(void *)temp_actions,
tmp_actions_n * sizeof(void *));
actions_n = tmp_actions_n;
}
dev_flow->dv.actions_n = actions_n;
if (wks->skip_matcher_reg)
return 0;
/* Register matcher. */
matcher.crc = rte_raw_cksum((const void *)matcher.mask.buf,
matcher.mask.size);
matcher.priority = mlx5_get_matcher_priority(dev, attr,
matcher.priority,
dev_flow->external);
/**
* When creating meter drop flow in drop table, using original
* 5-tuple match, the matcher priority should be lower than
* mtr_id matcher.
*/
if (attr->group == MLX5_FLOW_TABLE_LEVEL_METER &&
dev_flow->dv.table_id == MLX5_MTR_TABLE_ID_DROP &&
matcher.priority <= MLX5_REG_BITS)
matcher.priority += MLX5_REG_BITS;
/* reserved field no needs to be set to 0 here. */
tbl_key.is_fdb = attr->transfer;
tbl_key.is_egress = attr->egress;
tbl_key.level = dev_flow->dv.group;
tbl_key.id = dev_flow->dv.table_id;
if (flow_dv_matcher_register(dev, &matcher, &tbl_key, dev_flow,
tunnel, attr->group, error))
return -rte_errno;
return 0;
}
/**
* Set hash RX queue by hash fields (see enum ibv_rx_hash_fields)
* and tunnel.
*
* @param[in, out] action
* Shred RSS action holding hash RX queue objects.
* @param[in] hash_fields
* Defines combination of packet fields to participate in RX hash.
* @param[in] tunnel
* Tunnel type
* @param[in] hrxq_idx
* Hash RX queue index to set.
*
* @return
* 0 on success, otherwise negative errno value.
*/
static int
__flow_dv_action_rss_hrxq_set(struct mlx5_shared_action_rss *action,
const uint64_t hash_fields,
uint32_t hrxq_idx)
{
uint32_t *hrxqs = action->hrxq;
switch (hash_fields & ~IBV_RX_HASH_INNER) {
case MLX5_RSS_HASH_IPV4:
/* fall-through. */
case MLX5_RSS_HASH_IPV4_DST_ONLY:
/* fall-through. */
case MLX5_RSS_HASH_IPV4_SRC_ONLY:
hrxqs[0] = hrxq_idx;
return 0;
case MLX5_RSS_HASH_IPV4_TCP:
/* fall-through. */
case MLX5_RSS_HASH_IPV4_TCP_DST_ONLY:
/* fall-through. */
case MLX5_RSS_HASH_IPV4_TCP_SRC_ONLY:
hrxqs[1] = hrxq_idx;
return 0;
case MLX5_RSS_HASH_IPV4_UDP:
/* fall-through. */
case MLX5_RSS_HASH_IPV4_UDP_DST_ONLY:
/* fall-through. */
case MLX5_RSS_HASH_IPV4_UDP_SRC_ONLY:
hrxqs[2] = hrxq_idx;
return 0;
case MLX5_RSS_HASH_IPV6:
/* fall-through. */
case MLX5_RSS_HASH_IPV6_DST_ONLY:
/* fall-through. */
case MLX5_RSS_HASH_IPV6_SRC_ONLY:
hrxqs[3] = hrxq_idx;
return 0;
case MLX5_RSS_HASH_IPV6_TCP:
/* fall-through. */
case MLX5_RSS_HASH_IPV6_TCP_DST_ONLY:
/* fall-through. */
case MLX5_RSS_HASH_IPV6_TCP_SRC_ONLY:
hrxqs[4] = hrxq_idx;
return 0;
case MLX5_RSS_HASH_IPV6_UDP:
/* fall-through. */
case MLX5_RSS_HASH_IPV6_UDP_DST_ONLY:
/* fall-through. */
case MLX5_RSS_HASH_IPV6_UDP_SRC_ONLY:
hrxqs[5] = hrxq_idx;
return 0;
case MLX5_RSS_HASH_NONE:
hrxqs[6] = hrxq_idx;
return 0;
case MLX5_RSS_HASH_IPV4_ESP:
hrxqs[7] = hrxq_idx;
return 0;
case MLX5_RSS_HASH_IPV6_ESP:
hrxqs[8] = hrxq_idx;
return 0;
case MLX5_RSS_HASH_ESP_SPI:
hrxqs[9] = hrxq_idx;
return 0;
default:
return -1;
}
}
/**
* Look up for hash RX queue by hash fields (see enum ibv_rx_hash_fields)
* and tunnel.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[in] idx
* Shared RSS action ID holding hash RX queue objects.
* @param[in] hash_fields
* Defines combination of packet fields to participate in RX hash.
* @param[in] tunnel
* Tunnel type
*
* @return
* Valid hash RX queue index, otherwise 0.
*/
uint32_t
flow_dv_action_rss_hrxq_lookup(struct rte_eth_dev *dev, uint32_t idx,
const uint64_t hash_fields)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_shared_action_rss *shared_rss =
mlx5_ipool_get(priv->sh->ipool[MLX5_IPOOL_RSS_SHARED_ACTIONS], idx);
const uint32_t *hrxqs = shared_rss->hrxq;
switch (hash_fields & ~IBV_RX_HASH_INNER) {
case MLX5_RSS_HASH_IPV4:
/* fall-through. */
case MLX5_RSS_HASH_IPV4_DST_ONLY:
/* fall-through. */
case MLX5_RSS_HASH_IPV4_SRC_ONLY:
return hrxqs[0];
case MLX5_RSS_HASH_IPV4_TCP:
/* fall-through. */
case MLX5_RSS_HASH_IPV4_TCP_DST_ONLY:
/* fall-through. */
case MLX5_RSS_HASH_IPV4_TCP_SRC_ONLY:
return hrxqs[1];
case MLX5_RSS_HASH_IPV4_UDP:
/* fall-through. */
case MLX5_RSS_HASH_IPV4_UDP_DST_ONLY:
/* fall-through. */
case MLX5_RSS_HASH_IPV4_UDP_SRC_ONLY:
return hrxqs[2];
case MLX5_RSS_HASH_IPV6:
/* fall-through. */
case MLX5_RSS_HASH_IPV6_DST_ONLY:
/* fall-through. */
case MLX5_RSS_HASH_IPV6_SRC_ONLY:
return hrxqs[3];
case MLX5_RSS_HASH_IPV6_TCP:
/* fall-through. */
case MLX5_RSS_HASH_IPV6_TCP_DST_ONLY:
/* fall-through. */
case MLX5_RSS_HASH_IPV6_TCP_SRC_ONLY:
return hrxqs[4];
case MLX5_RSS_HASH_IPV6_UDP:
/* fall-through. */
case MLX5_RSS_HASH_IPV6_UDP_DST_ONLY:
/* fall-through. */
case MLX5_RSS_HASH_IPV6_UDP_SRC_ONLY:
return hrxqs[5];
case MLX5_RSS_HASH_NONE:
return hrxqs[6];
case MLX5_RSS_HASH_IPV4_ESP:
return hrxqs[7];
case MLX5_RSS_HASH_IPV6_ESP:
return hrxqs[8];
case MLX5_RSS_HASH_ESP_SPI:
return hrxqs[9];
default:
return 0;
}
}
/**
* Apply the flow to the NIC, lock free,
* (mutex should be acquired by caller).
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[in, out] flow
* Pointer to flow structure.
* @param[out] error
* Pointer to error structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_apply(struct rte_eth_dev *dev, struct rte_flow *flow,
struct rte_flow_error *error)
{
struct mlx5_flow_dv_workspace *dv;
struct mlx5_flow_handle *dh;
struct mlx5_flow_handle_dv *dv_h;
struct mlx5_flow *dev_flow;
struct mlx5_priv *priv = dev->data->dev_private;
uint32_t handle_idx;
int n;
int err;
int idx;
struct mlx5_flow_workspace *wks = mlx5_flow_get_thread_workspace();
struct mlx5_flow_rss_desc *rss_desc = &wks->rss_desc;
uint8_t misc_mask;
MLX5_ASSERT(wks);
for (idx = wks->flow_idx - 1; idx >= 0; idx--) {
dev_flow = &wks->flows[idx];
dv = &dev_flow->dv;
dh = dev_flow->handle;
dv_h = &dh->dvh;
n = dv->actions_n;
if (dh->fate_action == MLX5_FLOW_FATE_DROP) {
if (dv->transfer) {
MLX5_ASSERT(priv->sh->dr_drop_action);
dv->actions[n++] = priv->sh->dr_drop_action;
} else {
#ifdef HAVE_MLX5DV_DR
/* DR supports drop action placeholder. */
MLX5_ASSERT(priv->sh->dr_drop_action);
dv->actions[n++] = dv->group ?
priv->sh->dr_drop_action :
priv->root_drop_action;
#else
/* For DV we use the explicit drop queue. */
MLX5_ASSERT(priv->drop_queue.hrxq);
dv->actions[n++] =
priv->drop_queue.hrxq->action;
#endif
}
} else if ((dh->fate_action == MLX5_FLOW_FATE_QUEUE &&
!dv_h->rix_sample && !dv_h->rix_dest_array)) {
struct mlx5_hrxq *hrxq;
uint32_t hrxq_idx;
hrxq = flow_dv_hrxq_prepare(dev, dev_flow, rss_desc,
&hrxq_idx);
if (!hrxq) {
rte_flow_error_set
(error, rte_errno,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"cannot get hash queue");
goto error;
}
dh->rix_hrxq = hrxq_idx;
dv->actions[n++] = hrxq->action;
} else if (dh->fate_action == MLX5_FLOW_FATE_SHARED_RSS) {
struct mlx5_hrxq *hrxq = NULL;
uint32_t hrxq_idx;
hrxq_idx = flow_dv_action_rss_hrxq_lookup(dev,
rss_desc->shared_rss,
dev_flow->hash_fields);
if (hrxq_idx)
hrxq = mlx5_ipool_get
(priv->sh->ipool[MLX5_IPOOL_HRXQ],
hrxq_idx);
if (!hrxq) {
rte_flow_error_set
(error, rte_errno,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"cannot get hash queue");
goto error;
}
dh->rix_srss = rss_desc->shared_rss;
dv->actions[n++] = hrxq->action;
} else if (dh->fate_action == MLX5_FLOW_FATE_DEFAULT_MISS) {
if (!priv->sh->default_miss_action) {
rte_flow_error_set
(error, rte_errno,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"default miss action not be created.");
goto error;
}
dv->actions[n++] = priv->sh->default_miss_action;
}
misc_mask = flow_dv_matcher_enable(dv->value.buf);
__flow_dv_adjust_buf_size(&dv->value.size, misc_mask);
err = mlx5_flow_os_create_flow(dv_h->matcher->matcher_object,
(void *)&dv->value, n,
dv->actions, &dh->drv_flow);
if (err) {
rte_flow_error_set
(error, errno,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
(!priv->sh->config.allow_duplicate_pattern &&
errno == EEXIST) ?
"duplicating pattern is not allowed" :
"hardware refuses to create flow");
goto error;
}
if (priv->vmwa_context &&
dh->vf_vlan.tag && !dh->vf_vlan.created) {
/*
* The rule contains the VLAN pattern.
* For VF we are going to create VLAN
* interface to make hypervisor set correct
* e-Switch vport context.
*/
mlx5_vlan_vmwa_acquire(dev, &dh->vf_vlan);
}
}
return 0;
error:
err = rte_errno; /* Save rte_errno before cleanup. */
SILIST_FOREACH(priv->sh->ipool[MLX5_IPOOL_MLX5_FLOW], flow->dev_handles,
handle_idx, dh, next) {
/* hrxq is union, don't clear it if the flag is not set. */
if (dh->fate_action == MLX5_FLOW_FATE_QUEUE && dh->rix_hrxq) {
mlx5_hrxq_release(dev, dh->rix_hrxq);
dh->rix_hrxq = 0;
} else if (dh->fate_action == MLX5_FLOW_FATE_SHARED_RSS) {
dh->rix_srss = 0;
}
if (dh->vf_vlan.tag && dh->vf_vlan.created)
mlx5_vlan_vmwa_release(dev, &dh->vf_vlan);
}
rte_errno = err; /* Restore rte_errno. */
return -rte_errno;
}
void
flow_dv_matcher_remove_cb(void *tool_ctx __rte_unused,
struct mlx5_list_entry *entry)
{
struct mlx5_flow_dv_matcher *resource = container_of(entry,
typeof(*resource),
entry);
claim_zero(mlx5_flow_os_destroy_flow_matcher(resource->matcher_object));
mlx5_free(resource);
}
/**
* Release the flow matcher.
*
* @param dev
* Pointer to Ethernet device.
* @param port_id
* Index to port ID action resource.
*
* @return
* 1 while a reference on it exists, 0 when freed.
*/
static int
flow_dv_matcher_release(struct rte_eth_dev *dev,
struct mlx5_flow_handle *handle)
{
struct mlx5_flow_dv_matcher *matcher = handle->dvh.matcher;
struct mlx5_flow_tbl_data_entry *tbl = container_of(matcher->tbl,
typeof(*tbl), tbl);
int ret;
MLX5_ASSERT(matcher->matcher_object);
ret = mlx5_list_unregister(tbl->matchers, &matcher->entry);
flow_dv_tbl_resource_release(MLX5_SH(dev), &tbl->tbl);
return ret;
}
void
flow_dv_encap_decap_remove_cb(void *tool_ctx, struct mlx5_list_entry *entry)
{
struct mlx5_dev_ctx_shared *sh = tool_ctx;
struct mlx5_flow_dv_encap_decap_resource *res =
container_of(entry, typeof(*res), entry);
claim_zero(mlx5_flow_os_destroy_flow_action(res->action));
mlx5_ipool_free(sh->ipool[MLX5_IPOOL_DECAP_ENCAP], res->idx);
}
/**
* Release an encap/decap resource.
*
* @param dev
* Pointer to Ethernet device.
* @param encap_decap_idx
* Index of encap decap resource.
*
* @return
* 1 while a reference on it exists, 0 when freed.
*/
static int
flow_dv_encap_decap_resource_release(struct rte_eth_dev *dev,
uint32_t encap_decap_idx)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_flow_dv_encap_decap_resource *resource;
resource = mlx5_ipool_get(priv->sh->ipool[MLX5_IPOOL_DECAP_ENCAP],
encap_decap_idx);
if (!resource)
return 0;
MLX5_ASSERT(resource->action);
return mlx5_hlist_unregister(priv->sh->encaps_decaps, &resource->entry);
}
/**
* Release an jump to table action resource.
*
* @param dev
* Pointer to Ethernet device.
* @param rix_jump
* Index to the jump action resource.
*
* @return
* 1 while a reference on it exists, 0 when freed.
*/
static int
flow_dv_jump_tbl_resource_release(struct rte_eth_dev *dev,
uint32_t rix_jump)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_flow_tbl_data_entry *tbl_data;
tbl_data = mlx5_ipool_get(priv->sh->ipool[MLX5_IPOOL_JUMP],
rix_jump);
if (!tbl_data)
return 0;
return flow_dv_tbl_resource_release(MLX5_SH(dev), &tbl_data->tbl);
}
void
flow_dv_modify_remove_cb(void *tool_ctx, struct mlx5_list_entry *entry)
{
struct mlx5_flow_dv_modify_hdr_resource *res =
container_of(entry, typeof(*res), entry);
struct mlx5_dev_ctx_shared *sh = tool_ctx;
claim_zero(mlx5_flow_os_destroy_flow_action(res->action));
mlx5_ipool_free(sh->mdh_ipools[res->actions_num - 1], res->idx);
}
/**
* Release a modify-header resource.
*
* @param dev
* Pointer to Ethernet device.
* @param handle
* Pointer to mlx5_flow_handle.
*
* @return
* 1 while a reference on it exists, 0 when freed.
*/
static int
flow_dv_modify_hdr_resource_release(struct rte_eth_dev *dev,
struct mlx5_flow_handle *handle)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_flow_dv_modify_hdr_resource *entry = handle->dvh.modify_hdr;
MLX5_ASSERT(entry->action);
return mlx5_hlist_unregister(priv->sh->modify_cmds, &entry->entry);
}
void
flow_dv_port_id_remove_cb(void *tool_ctx, struct mlx5_list_entry *entry)
{
struct mlx5_dev_ctx_shared *sh = tool_ctx;
struct mlx5_flow_dv_port_id_action_resource *resource =
container_of(entry, typeof(*resource), entry);
claim_zero(mlx5_flow_os_destroy_flow_action(resource->action));
mlx5_ipool_free(sh->ipool[MLX5_IPOOL_PORT_ID], resource->idx);
}
/**
* Release port ID action resource.
*
* @param dev
* Pointer to Ethernet device.
* @param handle
* Pointer to mlx5_flow_handle.
*
* @return
* 1 while a reference on it exists, 0 when freed.
*/
static int
flow_dv_port_id_action_resource_release(struct rte_eth_dev *dev,
uint32_t port_id)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_flow_dv_port_id_action_resource *resource;
resource = mlx5_ipool_get(priv->sh->ipool[MLX5_IPOOL_PORT_ID], port_id);
if (!resource)
return 0;
MLX5_ASSERT(resource->action);
return mlx5_list_unregister(priv->sh->port_id_action_list,
&resource->entry);
}
/**
* Release shared RSS action resource.
*
* @param dev
* Pointer to Ethernet device.
* @param srss
* Shared RSS action index.
*/
static void
flow_dv_shared_rss_action_release(struct rte_eth_dev *dev, uint32_t srss)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_shared_action_rss *shared_rss;
shared_rss = mlx5_ipool_get
(priv->sh->ipool[MLX5_IPOOL_RSS_SHARED_ACTIONS], srss);
__atomic_sub_fetch(&shared_rss->refcnt, 1, __ATOMIC_RELAXED);
}
void
flow_dv_push_vlan_remove_cb(void *tool_ctx, struct mlx5_list_entry *entry)
{
struct mlx5_dev_ctx_shared *sh = tool_ctx;
struct mlx5_flow_dv_push_vlan_action_resource *resource =
container_of(entry, typeof(*resource), entry);
claim_zero(mlx5_flow_os_destroy_flow_action(resource->action));
mlx5_ipool_free(sh->ipool[MLX5_IPOOL_PUSH_VLAN], resource->idx);
}
/**
* Release push vlan action resource.
*
* @param dev
* Pointer to Ethernet device.
* @param handle
* Pointer to mlx5_flow_handle.
*
* @return
* 1 while a reference on it exists, 0 when freed.
*/
static int
flow_dv_push_vlan_action_resource_release(struct rte_eth_dev *dev,
struct mlx5_flow_handle *handle)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_flow_dv_push_vlan_action_resource *resource;
uint32_t idx = handle->dvh.rix_push_vlan;
resource = mlx5_ipool_get(priv->sh->ipool[MLX5_IPOOL_PUSH_VLAN], idx);
if (!resource)
return 0;
MLX5_ASSERT(resource->action);
return mlx5_list_unregister(priv->sh->push_vlan_action_list,
&resource->entry);
}
/**
* Release the fate resource.
*
* @param dev
* Pointer to Ethernet device.
* @param handle
* Pointer to mlx5_flow_handle.
*/
static void
flow_dv_fate_resource_release(struct rte_eth_dev *dev,
struct mlx5_flow_handle *handle)
{
if (!handle->rix_fate)
return;
switch (handle->fate_action) {
case MLX5_FLOW_FATE_QUEUE:
if (!handle->dvh.rix_sample && !handle->dvh.rix_dest_array)
mlx5_hrxq_release(dev, handle->rix_hrxq);
break;
case MLX5_FLOW_FATE_JUMP:
flow_dv_jump_tbl_resource_release(dev, handle->rix_jump);
break;
case MLX5_FLOW_FATE_PORT_ID:
flow_dv_port_id_action_resource_release(dev,
handle->rix_port_id_action);
break;
case MLX5_FLOW_FATE_SEND_TO_KERNEL:
/* In case of send_to_kernel action the actual release of
* resource is done when all shared DR resources are released
* since this resource is created once and always reused.
*/
break;
default:
DRV_LOG(DEBUG, "Incorrect fate action:%d", handle->fate_action);
break;
}
handle->rix_fate = 0;
}
void
flow_dv_sample_remove_cb(void *tool_ctx __rte_unused,
struct mlx5_list_entry *entry)
{
struct mlx5_flow_dv_sample_resource *resource = container_of(entry,
typeof(*resource),
entry);
struct rte_eth_dev *dev = resource->dev;
struct mlx5_priv *priv = dev->data->dev_private;
if (resource->verbs_action)
claim_zero(mlx5_flow_os_destroy_flow_action
(resource->verbs_action));
if (resource->normal_path_tbl)
flow_dv_tbl_resource_release(MLX5_SH(dev),
resource->normal_path_tbl);
flow_dv_sample_sub_actions_release(dev, &resource->sample_idx);
mlx5_ipool_free(priv->sh->ipool[MLX5_IPOOL_SAMPLE], resource->idx);
DRV_LOG(DEBUG, "sample resource %p: removed", (void *)resource);
}
/**
* Release an sample resource.
*
* @param dev
* Pointer to Ethernet device.
* @param handle
* Pointer to mlx5_flow_handle.
*
* @return
* 1 while a reference on it exists, 0 when freed.
*/
static int
flow_dv_sample_resource_release(struct rte_eth_dev *dev,
struct mlx5_flow_handle *handle)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_flow_dv_sample_resource *resource;
resource = mlx5_ipool_get(priv->sh->ipool[MLX5_IPOOL_SAMPLE],
handle->dvh.rix_sample);
if (!resource)
return 0;
MLX5_ASSERT(resource->verbs_action);
return mlx5_list_unregister(priv->sh->sample_action_list,
&resource->entry);
}
void
flow_dv_dest_array_remove_cb(void *tool_ctx __rte_unused,
struct mlx5_list_entry *entry)
{
struct mlx5_flow_dv_dest_array_resource *resource =
container_of(entry, typeof(*resource), entry);
struct rte_eth_dev *dev = resource->dev;
struct mlx5_priv *priv = dev->data->dev_private;
uint32_t i = 0;
MLX5_ASSERT(resource->action);
if (resource->action)
claim_zero(mlx5_flow_os_destroy_flow_action(resource->action));
for (; i < resource->num_of_dest; i++)
flow_dv_sample_sub_actions_release(dev,
&resource->sample_idx[i]);
mlx5_ipool_free(priv->sh->ipool[MLX5_IPOOL_DEST_ARRAY], resource->idx);
DRV_LOG(DEBUG, "destination array resource %p: removed",
(void *)resource);
}
/**
* Release an destination array resource.
*
* @param dev
* Pointer to Ethernet device.
* @param handle
* Pointer to mlx5_flow_handle.
*
* @return
* 1 while a reference on it exists, 0 when freed.
*/
static int
flow_dv_dest_array_resource_release(struct rte_eth_dev *dev,
struct mlx5_flow_handle *handle)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_flow_dv_dest_array_resource *resource;
resource = mlx5_ipool_get(priv->sh->ipool[MLX5_IPOOL_DEST_ARRAY],
handle->dvh.rix_dest_array);
if (!resource)
return 0;
MLX5_ASSERT(resource->action);
return mlx5_list_unregister(priv->sh->dest_array_list,
&resource->entry);
}
static void
flow_dv_geneve_tlv_option_resource_release(struct rte_eth_dev *dev)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_dev_ctx_shared *sh = priv->sh;
struct mlx5_geneve_tlv_option_resource *geneve_opt_resource =
sh->geneve_tlv_option_resource;
rte_spinlock_lock(&sh->geneve_tlv_opt_sl);
if (geneve_opt_resource) {
if (!(__atomic_sub_fetch(&geneve_opt_resource->refcnt, 1,
__ATOMIC_RELAXED))) {
claim_zero(mlx5_devx_cmd_destroy
(geneve_opt_resource->obj));
mlx5_free(sh->geneve_tlv_option_resource);
sh->geneve_tlv_option_resource = NULL;
}
}
rte_spinlock_unlock(&sh->geneve_tlv_opt_sl);
}
/**
* Remove the flow from the NIC but keeps it in memory.
* Lock free, (mutex should be acquired by caller).
*
* @param[in] dev
* Pointer to Ethernet device.
* @param[in, out] flow
* Pointer to flow structure.
*/
static void
flow_dv_remove(struct rte_eth_dev *dev, struct rte_flow *flow)
{
struct mlx5_flow_handle *dh;
uint32_t handle_idx;
struct mlx5_priv *priv = dev->data->dev_private;
if (!flow)
return;
handle_idx = flow->dev_handles;
while (handle_idx) {
dh = mlx5_ipool_get(priv->sh->ipool[MLX5_IPOOL_MLX5_FLOW],
handle_idx);
if (!dh)
return;
if (dh->drv_flow) {
claim_zero(mlx5_flow_os_destroy_flow(dh->drv_flow));
dh->drv_flow = NULL;
}
if (dh->fate_action == MLX5_FLOW_FATE_QUEUE)
flow_dv_fate_resource_release(dev, dh);
if (dh->vf_vlan.tag && dh->vf_vlan.created)
mlx5_vlan_vmwa_release(dev, &dh->vf_vlan);
handle_idx = dh->next.next;
}
}
/**
* Remove the flow from the NIC and the memory.
* Lock free, (mutex should be acquired by caller).
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[in, out] flow
* Pointer to flow structure.
*/
static void
flow_dv_destroy(struct rte_eth_dev *dev, struct rte_flow *flow)
{
struct mlx5_flow_handle *dev_handle;
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_flow_meter_info *fm = NULL;
uint32_t srss = 0;
if (!flow)
return;
flow_dv_remove(dev, flow);
if (flow->counter) {
flow_dv_counter_free(dev, flow->counter);
flow->counter = 0;
}
if (flow->meter) {
fm = flow_dv_meter_find_by_idx(priv, flow->meter);
if (fm)
mlx5_flow_meter_detach(priv, fm);
flow->meter = 0;
}
/* Keep the current age handling by default. */
if (flow->indirect_type == MLX5_INDIRECT_ACTION_TYPE_CT && flow->ct)
flow_dv_aso_ct_release(dev, flow->ct, NULL);
else if (flow->age)
flow_dv_aso_age_release(dev, flow->age);
if (flow->geneve_tlv_option) {
flow_dv_geneve_tlv_option_resource_release(dev);
flow->geneve_tlv_option = 0;
}
while (flow->dev_handles) {
uint32_t tmp_idx = flow->dev_handles;
dev_handle = mlx5_ipool_get(priv->sh->ipool
[MLX5_IPOOL_MLX5_FLOW], tmp_idx);
if (!dev_handle)
return;
flow->dev_handles = dev_handle->next.next;
while (dev_handle->flex_item) {
int index = rte_bsf32(dev_handle->flex_item);
mlx5_flex_release_index(dev, index);
dev_handle->flex_item &= ~(uint8_t)RTE_BIT32(index);
}
if (dev_handle->dvh.matcher)
flow_dv_matcher_release(dev, dev_handle);
if (dev_handle->dvh.rix_sample)
flow_dv_sample_resource_release(dev, dev_handle);
if (dev_handle->dvh.rix_dest_array)
flow_dv_dest_array_resource_release(dev, dev_handle);
if (dev_handle->dvh.rix_encap_decap)
flow_dv_encap_decap_resource_release(dev,
dev_handle->dvh.rix_encap_decap);
if (dev_handle->dvh.modify_hdr)
flow_dv_modify_hdr_resource_release(dev, dev_handle);
if (dev_handle->dvh.rix_push_vlan)
flow_dv_push_vlan_action_resource_release(dev,
dev_handle);
if (dev_handle->dvh.rix_tag)
flow_dv_tag_release(dev,
dev_handle->dvh.rix_tag);
if (dev_handle->fate_action != MLX5_FLOW_FATE_SHARED_RSS)
flow_dv_fate_resource_release(dev, dev_handle);
else if (!srss)
srss = dev_handle->rix_srss;
if (fm && dev_handle->is_meter_flow_id &&
dev_handle->split_flow_id)
mlx5_ipool_free(fm->flow_ipool,
dev_handle->split_flow_id);
else if (dev_handle->split_flow_id &&
!dev_handle->is_meter_flow_id)
mlx5_ipool_free(priv->sh->ipool
[MLX5_IPOOL_RSS_EXPANTION_FLOW_ID],
dev_handle->split_flow_id);
mlx5_ipool_free(priv->sh->ipool[MLX5_IPOOL_MLX5_FLOW],
tmp_idx);
}
if (srss)
flow_dv_shared_rss_action_release(dev, srss);
}
/**
* Release array of hash RX queue objects.
* Helper function.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[in, out] hrxqs
* Array of hash RX queue objects.
*
* @return
* Total number of references to hash RX queue objects in *hrxqs* array
* after this operation.
*/
static int
__flow_dv_hrxqs_release(struct rte_eth_dev *dev,
uint32_t (*hrxqs)[MLX5_RSS_HASH_FIELDS_LEN])
{
size_t i;
int remaining = 0;
for (i = 0; i < RTE_DIM(*hrxqs); i++) {
int ret = mlx5_hrxq_release(dev, (*hrxqs)[i]);
if (!ret)
(*hrxqs)[i] = 0;
remaining += ret;
}
return remaining;
}
/**
* Release all hash RX queue objects representing shared RSS action.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[in, out] action
* Shared RSS action to remove hash RX queue objects from.
*
* @return
* Total number of references to hash RX queue objects stored in *action*
* after this operation.
* Expected to be 0 if no external references held.
*/
static int
__flow_dv_action_rss_hrxqs_release(struct rte_eth_dev *dev,
struct mlx5_shared_action_rss *shared_rss)
{
return __flow_dv_hrxqs_release(dev, &shared_rss->hrxq);
}
/**
* Adjust L3/L4 hash value of pre-created shared RSS hrxq according to
* user input.
*
* Only one hash value is available for one L3+L4 combination:
* for example:
* MLX5_RSS_HASH_IPV4, MLX5_RSS_HASH_IPV4_SRC_ONLY, and
* MLX5_RSS_HASH_IPV4_DST_ONLY are mutually exclusive so they can share
* same slot in mlx5_rss_hash_fields.
*
* @param[in] orig_rss_types
* RSS type as provided in shared RSS action.
* @param[in, out] hash_field
* hash_field variable needed to be adjusted.
*
* @return
* void
*/
void
flow_dv_action_rss_l34_hash_adjust(uint64_t orig_rss_types,
uint64_t *hash_field)
{
uint64_t rss_types = rte_eth_rss_hf_refine(orig_rss_types);
switch (*hash_field & ~IBV_RX_HASH_INNER) {
case MLX5_RSS_HASH_IPV4:
if (rss_types & MLX5_IPV4_LAYER_TYPES) {
*hash_field &= ~MLX5_RSS_HASH_IPV4;
if (rss_types & RTE_ETH_RSS_L3_DST_ONLY)
*hash_field |= IBV_RX_HASH_DST_IPV4;
else if (rss_types & RTE_ETH_RSS_L3_SRC_ONLY)
*hash_field |= IBV_RX_HASH_SRC_IPV4;
else
*hash_field |= MLX5_RSS_HASH_IPV4;
}
return;
case MLX5_RSS_HASH_IPV6:
if (rss_types & MLX5_IPV6_LAYER_TYPES) {
*hash_field &= ~MLX5_RSS_HASH_IPV6;
if (rss_types & RTE_ETH_RSS_L3_DST_ONLY)
*hash_field |= IBV_RX_HASH_DST_IPV6;
else if (rss_types & RTE_ETH_RSS_L3_SRC_ONLY)
*hash_field |= IBV_RX_HASH_SRC_IPV6;
else
*hash_field |= MLX5_RSS_HASH_IPV6;
}
return;
case MLX5_RSS_HASH_IPV4_UDP:
/* fall-through. */
case MLX5_RSS_HASH_IPV6_UDP:
if (rss_types & RTE_ETH_RSS_UDP) {
*hash_field &= ~MLX5_UDP_IBV_RX_HASH;
if (rss_types & RTE_ETH_RSS_L4_DST_ONLY)
*hash_field |= IBV_RX_HASH_DST_PORT_UDP;
else if (rss_types & RTE_ETH_RSS_L4_SRC_ONLY)
*hash_field |= IBV_RX_HASH_SRC_PORT_UDP;
else
*hash_field |= MLX5_UDP_IBV_RX_HASH;
}
return;
case MLX5_RSS_HASH_IPV4_TCP:
/* fall-through. */
case MLX5_RSS_HASH_IPV6_TCP:
if (rss_types & RTE_ETH_RSS_TCP) {
*hash_field &= ~MLX5_TCP_IBV_RX_HASH;
if (rss_types & RTE_ETH_RSS_L4_DST_ONLY)
*hash_field |= IBV_RX_HASH_DST_PORT_TCP;
else if (rss_types & RTE_ETH_RSS_L4_SRC_ONLY)
*hash_field |= IBV_RX_HASH_SRC_PORT_TCP;
else
*hash_field |= MLX5_TCP_IBV_RX_HASH;
}
return;
default:
return;
}
}
/**
* Setup shared RSS action.
* Prepare set of hash RX queue objects sufficient to handle all valid
* hash_fields combinations (see enum ibv_rx_hash_fields).
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[in] action_idx
* Shared RSS action ipool index.
* @param[in, out] action
* Partially initialized shared RSS action.
* @param[out] error
* Perform verbose error reporting if not NULL. Initialized in case of
* error only.
*
* @return
* 0 on success, otherwise negative errno value.
*/
static int
__flow_dv_action_rss_setup(struct rte_eth_dev *dev,
uint32_t action_idx,
struct mlx5_shared_action_rss *shared_rss,
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_flow_rss_desc rss_desc = { 0 };
size_t i;
int err;
shared_rss->ind_tbl = mlx5_ind_table_obj_new
(dev, shared_rss->origin.queue,
shared_rss->origin.queue_num,
true,
!!dev->data->dev_started);
if (!shared_rss->ind_tbl)
return rte_flow_error_set(error, rte_errno,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"cannot setup indirection table");
memcpy(rss_desc.key, shared_rss->origin.key, MLX5_RSS_HASH_KEY_LEN);
rss_desc.key_len = MLX5_RSS_HASH_KEY_LEN;
rss_desc.const_q = shared_rss->origin.queue;
rss_desc.queue_num = shared_rss->origin.queue_num;
/* Set non-zero value to indicate a shared RSS. */
rss_desc.shared_rss = action_idx;
rss_desc.ind_tbl = shared_rss->ind_tbl;
if (priv->sh->config.dv_flow_en == 2)
rss_desc.hws_flags = MLX5DR_ACTION_FLAG_HWS_RX;
for (i = 0; i < MLX5_RSS_HASH_FIELDS_LEN; i++) {
struct mlx5_hrxq *hrxq;
uint64_t hash_fields = mlx5_rss_hash_fields[i];
int tunnel = 0;
flow_dv_action_rss_l34_hash_adjust(shared_rss->origin.types,
&hash_fields);
if (shared_rss->origin.level > 1) {
hash_fields |= IBV_RX_HASH_INNER;
tunnel = 1;
}
rss_desc.tunnel = tunnel;
rss_desc.hash_fields = hash_fields;
hrxq = mlx5_hrxq_get(dev, &rss_desc);
if (!hrxq) {
rte_flow_error_set
(error, rte_errno,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"cannot get hash queue");
goto error_hrxq_new;
}
err = __flow_dv_action_rss_hrxq_set
(shared_rss, hash_fields, hrxq->idx);
MLX5_ASSERT(!err);
}
return 0;
error_hrxq_new:
err = rte_errno;
__flow_dv_action_rss_hrxqs_release(dev, shared_rss);
if (!mlx5_ind_table_obj_release(dev, shared_rss->ind_tbl, true))
shared_rss->ind_tbl = NULL;
rte_errno = err;
return -rte_errno;
}
/**
* Create shared RSS action.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[in] conf
* Shared action configuration.
* @param[in] rss
* RSS action specification used to create shared action.
* @param[out] error
* Perform verbose error reporting if not NULL. Initialized in case of
* error only.
*
* @return
* A valid shared action ID in case of success, 0 otherwise and
* rte_errno is set.
*/
static uint32_t
__flow_dv_action_rss_create(struct rte_eth_dev *dev,
const struct rte_flow_indir_action_conf *conf,
const struct rte_flow_action_rss *rss,
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_shared_action_rss *shared_rss = NULL;
struct rte_flow_action_rss *origin;
const uint8_t *rss_key;
uint32_t idx;
RTE_SET_USED(conf);
shared_rss = mlx5_ipool_zmalloc
(priv->sh->ipool[MLX5_IPOOL_RSS_SHARED_ACTIONS], &idx);
if (!shared_rss) {
rte_flow_error_set(error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"cannot allocate resource memory");
goto error_rss_init;
}
if (idx > (1u << MLX5_INDIRECT_ACTION_TYPE_OFFSET)) {
rte_flow_error_set(error, E2BIG,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"rss action number out of range");
goto error_rss_init;
}
origin = &shared_rss->origin;
origin->func = rss->func;
origin->level = rss->level;
/* RSS type 0 indicates default RSS type (RTE_ETH_RSS_IP). */
origin->types = !rss->types ? RTE_ETH_RSS_IP : rss->types;
/* NULL RSS key indicates default RSS key. */
rss_key = !rss->key ? rss_hash_default_key : rss->key;
memcpy(shared_rss->key, rss_key, MLX5_RSS_HASH_KEY_LEN);
origin->key = &shared_rss->key[0];
origin->key_len = MLX5_RSS_HASH_KEY_LEN;
origin->queue = rss->queue;
origin->queue_num = rss->queue_num;
if (__flow_dv_action_rss_setup(dev, idx, shared_rss, error))
goto error_rss_init;
/* Update queue with indirect table queue memoyr. */
origin->queue = shared_rss->ind_tbl->queues;
rte_spinlock_init(&shared_rss->action_rss_sl);
__atomic_add_fetch(&shared_rss->refcnt, 1, __ATOMIC_RELAXED);
rte_spinlock_lock(&priv->shared_act_sl);
ILIST_INSERT(priv->sh->ipool[MLX5_IPOOL_RSS_SHARED_ACTIONS],
&priv->rss_shared_actions, idx, shared_rss, next);
rte_spinlock_unlock(&priv->shared_act_sl);
return idx;
error_rss_init:
if (shared_rss) {
if (shared_rss->ind_tbl)
mlx5_ind_table_obj_release(dev, shared_rss->ind_tbl,
!!dev->data->dev_started);
mlx5_ipool_free(priv->sh->ipool[MLX5_IPOOL_RSS_SHARED_ACTIONS],
idx);
}
return 0;
}
/**
* Destroy the shared RSS action.
* Release related hash RX queue objects.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[in] idx
* The shared RSS action object ID to be removed.
* @param[out] error
* Perform verbose error reporting if not NULL. Initialized in case of
* error only.
*
* @return
* 0 on success, otherwise negative errno value.
*/
static int
__flow_dv_action_rss_release(struct rte_eth_dev *dev, uint32_t idx,
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_shared_action_rss *shared_rss =
mlx5_ipool_get(priv->sh->ipool[MLX5_IPOOL_RSS_SHARED_ACTIONS], idx);
uint32_t old_refcnt = 1;
int remaining;
if (!shared_rss)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"invalid shared action");
if (!__atomic_compare_exchange_n(&shared_rss->refcnt, &old_refcnt,
0, 0, __ATOMIC_ACQUIRE,
__ATOMIC_RELAXED))
return rte_flow_error_set(error, EBUSY,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"shared rss has references");
remaining = __flow_dv_action_rss_hrxqs_release(dev, shared_rss);
if (remaining)
return rte_flow_error_set(error, EBUSY,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"shared rss hrxq has references");
remaining = mlx5_ind_table_obj_release(dev, shared_rss->ind_tbl,
!!dev->data->dev_started);
if (remaining)
return rte_flow_error_set(error, EBUSY,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"shared rss indirection table has"
" references");
rte_spinlock_lock(&priv->shared_act_sl);
ILIST_REMOVE(priv->sh->ipool[MLX5_IPOOL_RSS_SHARED_ACTIONS],
&priv->rss_shared_actions, idx, shared_rss, next);
rte_spinlock_unlock(&priv->shared_act_sl);
mlx5_ipool_free(priv->sh->ipool[MLX5_IPOOL_RSS_SHARED_ACTIONS],
idx);
return 0;
}
/**
* Create indirect action, lock free,
* (mutex should be acquired by caller).
* Dispatcher for action type specific call.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[in] conf
* Shared action configuration.
* @param[in] action
* Action specification used to create indirect action.
* @param[out] error
* Perform verbose error reporting if not NULL. Initialized in case of
* error only.
*
* @return
* A valid shared action handle in case of success, NULL otherwise and
* rte_errno is set.
*/
struct rte_flow_action_handle *
flow_dv_action_create(struct rte_eth_dev *dev,
const struct rte_flow_indir_action_conf *conf,
const struct rte_flow_action *action,
struct rte_flow_error *err)
{
struct mlx5_priv *priv = dev->data->dev_private;
uint32_t age_idx = 0;
uint32_t idx = 0;
uint32_t ret = 0;
switch (action->type) {
case RTE_FLOW_ACTION_TYPE_RSS:
ret = __flow_dv_action_rss_create(dev, conf, action->conf, err);
idx = (MLX5_INDIRECT_ACTION_TYPE_RSS <<
MLX5_INDIRECT_ACTION_TYPE_OFFSET) | ret;
break;
case RTE_FLOW_ACTION_TYPE_AGE:
age_idx = flow_dv_aso_age_alloc(dev, err);
if (!age_idx) {
ret = -rte_errno;
break;
}
idx = (MLX5_INDIRECT_ACTION_TYPE_AGE <<
MLX5_INDIRECT_ACTION_TYPE_OFFSET) | age_idx;
flow_dv_aso_age_params_init(dev, age_idx,
((const struct rte_flow_action_age *)
action->conf)->context ?
((const struct rte_flow_action_age *)
action->conf)->context :
(void *)(uintptr_t)idx,
((const struct rte_flow_action_age *)
action->conf)->timeout);
ret = age_idx;
break;
case RTE_FLOW_ACTION_TYPE_COUNT:
ret = flow_dv_translate_create_counter(dev, NULL, NULL, NULL);
idx = (MLX5_INDIRECT_ACTION_TYPE_COUNT <<
MLX5_INDIRECT_ACTION_TYPE_OFFSET) | ret;
break;
case RTE_FLOW_ACTION_TYPE_CONNTRACK:
ret = flow_dv_translate_create_conntrack(dev, action->conf,
err);
idx = MLX5_INDIRECT_ACT_CT_GEN_IDX(PORT_ID(priv), ret);
break;
default:
rte_flow_error_set(err, ENOTSUP, RTE_FLOW_ERROR_TYPE_ACTION,
NULL, "action type not supported");
break;
}
return ret ? (struct rte_flow_action_handle *)(uintptr_t)idx : NULL;
}
/**
* Destroy the indirect action.
* Release action related resources on the NIC and the memory.
* Lock free, (mutex should be acquired by caller).
* Dispatcher for action type specific call.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[in] handle
* The indirect action object handle to be removed.
* @param[out] error
* Perform verbose error reporting if not NULL. Initialized in case of
* error only.
*
* @return
* 0 on success, otherwise negative errno value.
*/
int
flow_dv_action_destroy(struct rte_eth_dev *dev,
struct rte_flow_action_handle *handle,
struct rte_flow_error *error)
{
uint32_t act_idx = (uint32_t)(uintptr_t)handle;
uint32_t type = act_idx >> MLX5_INDIRECT_ACTION_TYPE_OFFSET;
uint32_t idx = act_idx & ((1u << MLX5_INDIRECT_ACTION_TYPE_OFFSET) - 1);
struct mlx5_flow_counter *cnt;
uint32_t no_flow_refcnt = 1;
int ret;
switch (type) {
case MLX5_INDIRECT_ACTION_TYPE_RSS:
return __flow_dv_action_rss_release(dev, idx, error);
case MLX5_INDIRECT_ACTION_TYPE_COUNT:
cnt = flow_dv_counter_get_by_idx(dev, idx, NULL);
if (!__atomic_compare_exchange_n(&cnt->shared_info.refcnt,
&no_flow_refcnt, 1, false,
__ATOMIC_ACQUIRE,
__ATOMIC_RELAXED))
return rte_flow_error_set(error, EBUSY,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"Indirect count action has references");
flow_dv_counter_free(dev, idx);
return 0;
case MLX5_INDIRECT_ACTION_TYPE_AGE:
ret = flow_dv_aso_age_release(dev, idx);
if (ret)
/*
* In this case, the last flow has a reference will
* actually release the age action.
*/
DRV_LOG(DEBUG, "Indirect age action %" PRIu32 " was"
" released with references %d.", idx, ret);
return 0;
case MLX5_INDIRECT_ACTION_TYPE_CT:
ret = flow_dv_aso_ct_release(dev, idx, error);
if (ret < 0)
return ret;
if (ret > 0)
DRV_LOG(DEBUG, "Connection tracking object %u still "
"has references %d.", idx, ret);
return 0;
default:
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"action type not supported");
}
}
/**
* Updates in place shared RSS action configuration.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[in] idx
* The shared RSS action object ID to be updated.
* @param[in] action_conf
* RSS action specification used to modify *shared_rss*.
* @param[out] error
* Perform verbose error reporting if not NULL. Initialized in case of
* error only.
*
* @return
* 0 on success, otherwise negative errno value.
* @note: currently only support update of RSS queues.
*/
static int
__flow_dv_action_rss_update(struct rte_eth_dev *dev, uint32_t idx,
const struct rte_flow_action_rss *action_conf,
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_shared_action_rss *shared_rss =
mlx5_ipool_get(priv->sh->ipool[MLX5_IPOOL_RSS_SHARED_ACTIONS], idx);
int ret = 0;
void *queue = NULL;
void *queue_i = NULL;
uint32_t queue_size = action_conf->queue_num * sizeof(uint16_t);
bool dev_started = !!dev->data->dev_started;
if (!shared_rss)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"invalid shared action to update");
if (priv->obj_ops.ind_table_modify == NULL)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"cannot modify indirection table");
queue = mlx5_malloc(MLX5_MEM_ZERO,
RTE_ALIGN_CEIL(queue_size, sizeof(void *)),
0, SOCKET_ID_ANY);
if (!queue)
return rte_flow_error_set(error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"cannot allocate resource memory");
memcpy(queue, action_conf->queue, queue_size);
MLX5_ASSERT(shared_rss->ind_tbl);
rte_spinlock_lock(&shared_rss->action_rss_sl);
queue_i = shared_rss->ind_tbl->queues;
ret = mlx5_ind_table_obj_modify(dev, shared_rss->ind_tbl,
queue, action_conf->queue_num,
true /* standalone */,
dev_started /* ref_new_qs */,
dev_started /* deref_old_qs */);
if (ret) {
ret = rte_flow_error_set(error, rte_errno,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"cannot update indirection table");
} else {
/* Restore the queue to indirect table internal queue. */
memcpy(queue_i, queue, queue_size);
shared_rss->ind_tbl->queues = queue_i;
shared_rss->origin.queue_num = action_conf->queue_num;
}
mlx5_free(queue);
rte_spinlock_unlock(&shared_rss->action_rss_sl);
return ret;
}
/*
* Updates in place conntrack context or direction.
* Context update should be synchronized.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[in] idx
* The conntrack object ID to be updated.
* @param[in] update
* Pointer to the structure of information to update.
* @param[out] error
* Perform verbose error reporting if not NULL. Initialized in case of
* error only.
*
* @return
* 0 on success, otherwise negative errno value.
*/
static int
__flow_dv_action_ct_update(struct rte_eth_dev *dev, uint32_t idx,
const struct rte_flow_modify_conntrack *update,
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_aso_ct_action *ct;
const struct rte_flow_action_conntrack *new_prf;
int ret = 0;
uint16_t owner = (uint16_t)MLX5_INDIRECT_ACT_CT_GET_OWNER(idx);
uint32_t dev_idx;
if (PORT_ID(priv) != owner)
return rte_flow_error_set(error, EACCES,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"CT object owned by another port");
dev_idx = MLX5_INDIRECT_ACT_CT_GET_IDX(idx);
ct = flow_aso_ct_get_by_dev_idx(dev, dev_idx);
if (!ct->refcnt)
return rte_flow_error_set(error, ENOMEM,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"CT object is inactive");
new_prf = &update->new_ct;
if (update->direction)
ct->is_original = !!new_prf->is_original_dir;
if (update->state) {
/* Only validate the profile when it needs to be updated. */
ret = mlx5_validate_action_ct(dev, new_prf, error);
if (ret)
return ret;
ret = mlx5_aso_ct_update_by_wqe(priv->sh, MLX5_HW_INV_QUEUE,
ct, new_prf, NULL, true);
if (ret)
return rte_flow_error_set(error, EIO,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"Failed to send CT context update WQE");
/* Block until ready or a failure, default is asynchronous. */
ret = mlx5_aso_ct_available(priv->sh, MLX5_HW_INV_QUEUE, ct);
if (ret)
rte_flow_error_set(error, rte_errno,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"Timeout to get the CT update");
}
return ret;
}
/**
* Updates in place shared action configuration, lock free,
* (mutex should be acquired by caller).
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[in] handle
* The indirect action object handle to be updated.
* @param[in] update
* Action specification used to modify the action pointed by *handle*.
* *update* could be of same type with the action pointed by the *handle*
* handle argument, or some other structures like a wrapper, depending on
* the indirect action type.
* @param[out] error
* Perform verbose error reporting if not NULL. Initialized in case of
* error only.
*
* @return
* 0 on success, otherwise negative errno value.
*/
int
flow_dv_action_update(struct rte_eth_dev *dev,
struct rte_flow_action_handle *handle,
const void *update,
struct rte_flow_error *err)
{
uint32_t act_idx = (uint32_t)(uintptr_t)handle;
uint32_t type = act_idx >> MLX5_INDIRECT_ACTION_TYPE_OFFSET;
uint32_t idx = act_idx & ((1u << MLX5_INDIRECT_ACTION_TYPE_OFFSET) - 1);
const void *action_conf;
switch (type) {
case MLX5_INDIRECT_ACTION_TYPE_RSS:
action_conf = ((const struct rte_flow_action *)update)->conf;
return __flow_dv_action_rss_update(dev, idx, action_conf, err);
case MLX5_INDIRECT_ACTION_TYPE_CT:
return __flow_dv_action_ct_update(dev, idx, update, err);
default:
return rte_flow_error_set(err, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"action type update not supported");
}
}
/**
* Destroy the meter sub policy table rules.
* Lock free, (mutex should be acquired by caller).
*
* @param[in] dev
* Pointer to Ethernet device.
* @param[in] sub_policy
* Pointer to meter sub policy table.
*/
static void
__flow_dv_destroy_sub_policy_rules(struct rte_eth_dev *dev,
struct mlx5_flow_meter_sub_policy *sub_policy)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_flow_tbl_data_entry *tbl;
struct mlx5_flow_meter_policy *policy = sub_policy->main_policy;
struct mlx5_flow_meter_info *next_fm;
struct mlx5_sub_policy_color_rule *color_rule;
void *tmp;
uint32_t i;
for (i = 0; i < RTE_COLORS; i++) {
next_fm = NULL;
if (i <= RTE_COLOR_YELLOW && policy &&
policy->act_cnt[i].fate_action == MLX5_FLOW_FATE_MTR)
next_fm = mlx5_flow_meter_find(priv,
policy->act_cnt[i].next_mtr_id, NULL);
RTE_TAILQ_FOREACH_SAFE(color_rule, &sub_policy->color_rules[i],
next_port, tmp) {
claim_zero(mlx5_flow_os_destroy_flow(color_rule->rule));
tbl = container_of(color_rule->matcher->tbl,
typeof(*tbl), tbl);
mlx5_list_unregister(tbl->matchers,
&color_rule->matcher->entry);
TAILQ_REMOVE(&sub_policy->color_rules[i],
color_rule, next_port);
mlx5_free(color_rule);
if (next_fm)
mlx5_flow_meter_detach(priv, next_fm);
}
}
for (i = 0; i < MLX5_MTR_RTE_COLORS; i++) {
if (sub_policy->rix_hrxq[i]) {
if (policy && !policy->is_hierarchy)
mlx5_hrxq_release(dev, sub_policy->rix_hrxq[i]);
sub_policy->rix_hrxq[i] = 0;
}
if (sub_policy->jump_tbl[i]) {
flow_dv_tbl_resource_release(MLX5_SH(dev),
sub_policy->jump_tbl[i]);
sub_policy->jump_tbl[i] = NULL;
}
}
if (sub_policy->tbl_rsc) {
flow_dv_tbl_resource_release(MLX5_SH(dev),
sub_policy->tbl_rsc);
sub_policy->tbl_rsc = NULL;
}
}
/**
* Destroy policy rules, lock free,
* (mutex should be acquired by caller).
* Dispatcher for action type specific call.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[in] mtr_policy
* Meter policy struct.
*/
static void
flow_dv_destroy_policy_rules(struct rte_eth_dev *dev,
struct mlx5_flow_meter_policy *mtr_policy)
{
uint32_t i, j;
struct mlx5_flow_meter_sub_policy *sub_policy;
uint16_t sub_policy_num;
for (i = 0; i < MLX5_MTR_DOMAIN_MAX; i++) {
sub_policy_num = (mtr_policy->sub_policy_num >>
(MLX5_MTR_SUB_POLICY_NUM_SHIFT * i)) &
MLX5_MTR_SUB_POLICY_NUM_MASK;
for (j = 0; j < sub_policy_num; j++) {
sub_policy = mtr_policy->sub_policys[i][j];
if (sub_policy)
__flow_dv_destroy_sub_policy_rules(dev,
sub_policy);
}
}
}
/**
* Destroy policy action, lock free,
* (mutex should be acquired by caller).
* Dispatcher for action type specific call.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[in] mtr_policy
* Meter policy struct.
*/
static void
flow_dv_destroy_mtr_policy_acts(struct rte_eth_dev *dev,
struct mlx5_flow_meter_policy *mtr_policy)
{
struct rte_flow_action *rss_action;
struct mlx5_flow_handle dev_handle;
uint32_t i, j;
for (i = 0; i < MLX5_MTR_RTE_COLORS; i++) {
if (mtr_policy->act_cnt[i].rix_mark) {
flow_dv_tag_release(dev,
mtr_policy->act_cnt[i].rix_mark);
mtr_policy->act_cnt[i].rix_mark = 0;
}
if (mtr_policy->act_cnt[i].modify_hdr) {
dev_handle.dvh.modify_hdr =
mtr_policy->act_cnt[i].modify_hdr;
flow_dv_modify_hdr_resource_release(dev, &dev_handle);
}
switch (mtr_policy->act_cnt[i].fate_action) {
case MLX5_FLOW_FATE_SHARED_RSS:
rss_action = mtr_policy->act_cnt[i].rss;
mlx5_free(rss_action);
break;
case MLX5_FLOW_FATE_PORT_ID:
if (mtr_policy->act_cnt[i].rix_port_id_action) {
flow_dv_port_id_action_resource_release(dev,
mtr_policy->act_cnt[i].rix_port_id_action);
mtr_policy->act_cnt[i].rix_port_id_action = 0;
}
break;
case MLX5_FLOW_FATE_DROP:
case MLX5_FLOW_FATE_JUMP:
for (j = 0; j < MLX5_MTR_DOMAIN_MAX; j++)
mtr_policy->act_cnt[i].dr_jump_action[j] =
NULL;
break;
default:
/*Queue action do nothing*/
break;
}
}
for (j = 0; j < MLX5_MTR_DOMAIN_MAX; j++)
mtr_policy->dr_drop_action[j] = NULL;
}
/**
* Create yellow action for color aware meter.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[in] fm
* Meter information table.
* @param[out] error
* Perform verbose error reporting if not NULL. Initialized in case of
* error only.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
__flow_dv_create_mtr_yellow_action(struct rte_eth_dev *dev,
struct mlx5_flow_meter_info *fm,
struct rte_mtr_error *error)
{
#ifdef HAVE_MLX5_DR_CREATE_ACTION_ASO
struct mlx5_priv *priv = dev->data->dev_private;
struct rte_flow_error flow_err;
struct mlx5_aso_mtr *aso_mtr;
struct mlx5_aso_mtr_pool *pool;
uint8_t reg_id;
aso_mtr = container_of(fm, struct mlx5_aso_mtr, fm);
pool = container_of(aso_mtr, struct mlx5_aso_mtr_pool, mtrs[aso_mtr->offset]);
reg_id = mlx5_flow_get_reg_id(dev, MLX5_MTR_COLOR, 0, &flow_err);
fm->meter_action_y =
mlx5_glue->dv_create_flow_action_aso(priv->sh->rx_domain,
pool->devx_obj->obj,
aso_mtr->offset,
(1 << MLX5_FLOW_COLOR_YELLOW),
reg_id - REG_C_0);
#else
RTE_SET_USED(dev);
#endif
if (!fm->meter_action_y) {
return -rte_mtr_error_set(error, EINVAL, RTE_MTR_ERROR_TYPE_MTR_ID, NULL,
"Fail to create yellow meter action.");
}
return 0;
}
/**
* Create policy action per domain, lock free,
* (mutex should be acquired by caller).
* Dispatcher for action type specific call.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[in] mtr_policy
* Meter policy struct.
* @param[in] action
* Action specification used to create meter actions.
* @param[in] attr
* Pointer to the flow attributes.
* @param[out] error
* Perform verbose error reporting if not NULL. Initialized in case of
* error only.
*
* @return
* 0 on success, otherwise negative errno value.
*/
static int
__flow_dv_create_domain_policy_acts(struct rte_eth_dev *dev,
struct mlx5_flow_meter_policy *mtr_policy,
const struct rte_flow_action *actions[RTE_COLORS],
struct rte_flow_attr *attr,
enum mlx5_meter_domain domain,
struct rte_mtr_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct rte_flow_error flow_err;
const struct rte_flow_action *act;
uint64_t action_flags;
struct mlx5_flow_handle dh;
struct mlx5_flow dev_flow;
struct mlx5_flow_dv_port_id_action_resource port_id_action;
int i, ret;
uint8_t egress, transfer;
struct mlx5_meter_policy_action_container *act_cnt = NULL;
union {
struct mlx5_flow_dv_modify_hdr_resource res;
uint8_t len[sizeof(struct mlx5_flow_dv_modify_hdr_resource) +
sizeof(struct mlx5_modification_cmd) *
(MLX5_MAX_MODIFY_NUM + 1)];
} mhdr_dummy;
struct mlx5_flow_dv_modify_hdr_resource *mhdr_res = &mhdr_dummy.res;
egress = (domain == MLX5_MTR_DOMAIN_EGRESS) ? 1 : 0;
transfer = (domain == MLX5_MTR_DOMAIN_TRANSFER) ? 1 : 0;
memset(&dh, 0, sizeof(struct mlx5_flow_handle));
memset(&dev_flow, 0, sizeof(struct mlx5_flow));
memset(&port_id_action, 0,
sizeof(struct mlx5_flow_dv_port_id_action_resource));
memset(mhdr_res, 0, sizeof(*mhdr_res));
mhdr_res->ft_type = transfer ? MLX5DV_FLOW_TABLE_TYPE_FDB :
(egress ? MLX5DV_FLOW_TABLE_TYPE_NIC_TX :
MLX5DV_FLOW_TABLE_TYPE_NIC_RX);
dev_flow.handle = &dh;
dev_flow.dv.port_id_action = &port_id_action;
dev_flow.external = true;
for (i = 0; i < RTE_COLORS; i++) {
if (i < MLX5_MTR_RTE_COLORS)
act_cnt = &mtr_policy->act_cnt[i];
/* Skip the color policy actions creation. */
if ((i == RTE_COLOR_YELLOW && mtr_policy->skip_y) ||
(i == RTE_COLOR_GREEN && mtr_policy->skip_g))
continue;
action_flags = 0;
for (act = actions[i];
act && act->type != RTE_FLOW_ACTION_TYPE_END; act++) {
switch (act->type) {
case RTE_FLOW_ACTION_TYPE_MARK:
{
uint32_t tag_be = mlx5_flow_mark_set
(((const struct rte_flow_action_mark *)
(act->conf))->id);
if (i >= MLX5_MTR_RTE_COLORS)
return -rte_mtr_error_set(error,
ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL,
"cannot create policy "
"mark action for this color");
if (flow_dv_tag_resource_register(dev, tag_be,
&dev_flow, &flow_err))
return -rte_mtr_error_set(error,
ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL,
"cannot setup policy mark action");
MLX5_ASSERT(dev_flow.dv.tag_resource);
act_cnt->rix_mark =
dev_flow.handle->dvh.rix_tag;
action_flags |= MLX5_FLOW_ACTION_MARK;
mtr_policy->mark = 1;
break;
}
case RTE_FLOW_ACTION_TYPE_SET_TAG:
if (i >= MLX5_MTR_RTE_COLORS)
return -rte_mtr_error_set(error,
ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL,
"cannot create policy "
"set tag action for this color");
if (flow_dv_convert_action_set_tag
(dev, mhdr_res,
(const struct rte_flow_action_set_tag *)
act->conf, &flow_err))
return -rte_mtr_error_set(error,
ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL, "cannot convert policy "
"set tag action");
if (!mhdr_res->actions_num)
return -rte_mtr_error_set(error,
ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL, "cannot find policy "
"set tag action");
action_flags |= MLX5_FLOW_ACTION_SET_TAG;
break;
case RTE_FLOW_ACTION_TYPE_DROP:
{
struct mlx5_flow_mtr_mng *mtrmng =
priv->sh->mtrmng;
struct mlx5_flow_tbl_data_entry *tbl_data;
/*
* Create the drop table with
* METER DROP level.
*/
if (!mtrmng->drop_tbl[domain]) {
mtrmng->drop_tbl[domain] =
flow_dv_tbl_resource_get(dev,
MLX5_FLOW_TABLE_LEVEL_METER,
egress, transfer, false, NULL, 0,
0, MLX5_MTR_TABLE_ID_DROP, &flow_err);
if (!mtrmng->drop_tbl[domain])
return -rte_mtr_error_set
(error, ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL,
"Failed to create meter drop table");
}
tbl_data = container_of
(mtrmng->drop_tbl[domain],
struct mlx5_flow_tbl_data_entry, tbl);
if (i < MLX5_MTR_RTE_COLORS) {
act_cnt->dr_jump_action[domain] =
tbl_data->jump.action;
act_cnt->fate_action =
MLX5_FLOW_FATE_DROP;
}
if (i == RTE_COLOR_RED)
mtr_policy->dr_drop_action[domain] =
tbl_data->jump.action;
action_flags |= MLX5_FLOW_ACTION_DROP;
break;
}
case RTE_FLOW_ACTION_TYPE_QUEUE:
{
if (i >= MLX5_MTR_RTE_COLORS)
return -rte_mtr_error_set(error,
ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL, "cannot create policy "
"fate queue for this color");
act_cnt->queue =
((const struct rte_flow_action_queue *)
(act->conf))->index;
act_cnt->fate_action =
MLX5_FLOW_FATE_QUEUE;
dev_flow.handle->fate_action =
MLX5_FLOW_FATE_QUEUE;
mtr_policy->is_queue = 1;
action_flags |= MLX5_FLOW_ACTION_QUEUE;
break;
}
case RTE_FLOW_ACTION_TYPE_RSS:
{
int rss_size;
if (i >= MLX5_MTR_RTE_COLORS)
return -rte_mtr_error_set(error,
ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL,
"cannot create policy "
"rss action for this color");
/*
* Save RSS conf into policy struct
* for translate stage.
*/
rss_size = (int)rte_flow_conv
(RTE_FLOW_CONV_OP_ACTION,
NULL, 0, act, &flow_err);
if (rss_size <= 0)
return -rte_mtr_error_set(error,
ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL, "Get the wrong "
"rss action struct size");
act_cnt->rss = mlx5_malloc(MLX5_MEM_ZERO,
rss_size, 0, SOCKET_ID_ANY);
if (!act_cnt->rss)
return -rte_mtr_error_set(error,
ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL,
"Fail to malloc rss action memory");
ret = rte_flow_conv(RTE_FLOW_CONV_OP_ACTION,
act_cnt->rss, rss_size,
act, &flow_err);
if (ret < 0)
return -rte_mtr_error_set(error,
ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL, "Fail to save "
"rss action into policy struct");
act_cnt->fate_action =
MLX5_FLOW_FATE_SHARED_RSS;
action_flags |= MLX5_FLOW_ACTION_RSS;
break;
}
case RTE_FLOW_ACTION_TYPE_PORT_ID:
case RTE_FLOW_ACTION_TYPE_REPRESENTED_PORT:
{
struct mlx5_flow_dv_port_id_action_resource
port_id_resource;
uint32_t port_id = 0;
if (i >= MLX5_MTR_RTE_COLORS)
return -rte_mtr_error_set(error,
ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL, "cannot create policy "
"port action for this color");
memset(&port_id_resource, 0,
sizeof(port_id_resource));
if (flow_dv_translate_action_port_id(dev, act,
&port_id, &flow_err))
return -rte_mtr_error_set(error,
ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL, "cannot translate "
"policy port action");
port_id_resource.port_id = port_id;
if (flow_dv_port_id_action_resource_register
(dev, &port_id_resource,
&dev_flow, &flow_err))
return -rte_mtr_error_set(error,
ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL, "cannot setup "
"policy port action");
act_cnt->rix_port_id_action =
dev_flow.handle->rix_port_id_action;
act_cnt->fate_action =
MLX5_FLOW_FATE_PORT_ID;
action_flags |= MLX5_FLOW_ACTION_PORT_ID;
break;
}
case RTE_FLOW_ACTION_TYPE_JUMP:
{
uint32_t jump_group = 0;
uint32_t table = 0;
struct mlx5_flow_tbl_data_entry *tbl_data;
struct flow_grp_info grp_info = {
.external = !!dev_flow.external,
.transfer = !!transfer,
.fdb_def_rule = !!priv->fdb_def_rule,
.std_tbl_fix = 0,
.skip_scale = dev_flow.skip_scale &
(1 << MLX5_SCALE_FLOW_GROUP_BIT),
};
struct mlx5_flow_meter_sub_policy *sub_policy =
mtr_policy->sub_policys[domain][0];
if (i >= MLX5_MTR_RTE_COLORS)
return -rte_mtr_error_set(error,
ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL,
"cannot create policy "
"jump action for this color");
jump_group =
((const struct rte_flow_action_jump *)
act->conf)->group;
if (mlx5_flow_group_to_table(dev, NULL,
jump_group,
&table,
&grp_info, &flow_err))
return -rte_mtr_error_set(error,
ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL, "cannot setup "
"policy jump action");
sub_policy->jump_tbl[i] =
flow_dv_tbl_resource_get(dev,
table, egress,
transfer,
!!dev_flow.external,
NULL, jump_group, 0,
0, &flow_err);
if
(!sub_policy->jump_tbl[i])
return -rte_mtr_error_set(error,
ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL, "cannot create jump action.");
tbl_data = container_of
(sub_policy->jump_tbl[i],
struct mlx5_flow_tbl_data_entry, tbl);
act_cnt->dr_jump_action[domain] =
tbl_data->jump.action;
act_cnt->fate_action =
MLX5_FLOW_FATE_JUMP;
action_flags |= MLX5_FLOW_ACTION_JUMP;
break;
}
case RTE_FLOW_ACTION_TYPE_MODIFY_FIELD:
{
if (i >= MLX5_MTR_RTE_COLORS)
return -rte_mtr_error_set(error,
ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL,
"cannot create policy modify field for this color");
if (flow_dv_convert_action_modify_field
(dev, mhdr_res, act, attr, &flow_err))
return -rte_mtr_error_set(error,
ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL, "cannot setup policy modify field action");
if (!mhdr_res->actions_num)
return -rte_mtr_error_set(error,
ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL, "cannot find policy modify field action");
action_flags |= MLX5_FLOW_ACTION_MODIFY_FIELD;
break;
}
/*
* No need to check meter hierarchy for R colors
* here since it is done in the validation stage.
*/
case RTE_FLOW_ACTION_TYPE_METER:
{
const struct rte_flow_action_meter *mtr;
struct mlx5_flow_meter_info *next_fm;
struct mlx5_flow_meter_policy *next_policy;
struct rte_flow_action tag_action;
struct mlx5_rte_flow_action_set_tag set_tag;
uint32_t next_mtr_idx = 0;
mtr = act->conf;
next_fm = mlx5_flow_meter_find(priv,
mtr->mtr_id,
&next_mtr_idx);
if (!next_fm)
return -rte_mtr_error_set(error, EINVAL,
RTE_MTR_ERROR_TYPE_MTR_ID, NULL,
"Fail to find next meter.");
if (next_fm->def_policy)
return -rte_mtr_error_set(error, EINVAL,
RTE_MTR_ERROR_TYPE_MTR_ID, NULL,
"Hierarchy only supports termination meter.");
next_policy = mlx5_flow_meter_policy_find(dev,
next_fm->policy_id, NULL);
MLX5_ASSERT(next_policy);
if (next_fm->drop_cnt) {
set_tag.id =
(enum modify_reg)
mlx5_flow_get_reg_id(dev,
MLX5_MTR_ID,
0,
(struct rte_flow_error *)error);
set_tag.offset = (priv->mtr_reg_share ?
MLX5_MTR_COLOR_BITS : 0);
set_tag.length = (priv->mtr_reg_share ?
MLX5_MTR_IDLE_BITS_IN_COLOR_REG :
MLX5_REG_BITS);
set_tag.data = next_mtr_idx;
tag_action.type =
(enum rte_flow_action_type)
MLX5_RTE_FLOW_ACTION_TYPE_TAG;
tag_action.conf = &set_tag;
if (flow_dv_convert_action_set_reg
(mhdr_res, &tag_action,
(struct rte_flow_error *)error))
return -rte_errno;
action_flags |=
MLX5_FLOW_ACTION_SET_TAG;
}
if (i == RTE_COLOR_YELLOW && next_fm->color_aware &&
!next_fm->meter_action_y)
if (__flow_dv_create_mtr_yellow_action(dev, next_fm, error))
return -rte_errno;
act_cnt->fate_action = MLX5_FLOW_FATE_MTR;
act_cnt->next_mtr_id = next_fm->meter_id;
act_cnt->next_sub_policy = NULL;
mtr_policy->is_hierarchy = 1;
mtr_policy->dev = next_policy->dev;
if (next_policy->mark)
mtr_policy->mark = 1;
if (next_fm->drop_cnt || next_policy->hierarchy_drop_cnt)
mtr_policy->hierarchy_drop_cnt = 1;
action_flags |=
MLX5_FLOW_ACTION_METER_WITH_TERMINATED_POLICY;
break;
}
default:
return -rte_mtr_error_set(error, ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL, "action type not supported");
}
if ((action_flags & MLX5_FLOW_ACTION_SET_TAG) ||
(action_flags & MLX5_FLOW_ACTION_MODIFY_FIELD)) {
/* create modify action if needed. */
dev_flow.dv.group = 1;
if (flow_dv_modify_hdr_resource_register
(dev, mhdr_res, &dev_flow, &flow_err))
return -rte_mtr_error_set(error,
ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL, "cannot register policy set tag/modify field action");
act_cnt->modify_hdr =
dev_flow.handle->dvh.modify_hdr;
}
}
}
return 0;
}
/**
* Create policy action per domain, lock free,
* (mutex should be acquired by caller).
* Dispatcher for action type specific call.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[in] mtr_policy
* Meter policy struct.
* @param[in] action
* Action specification used to create meter actions.
* @param[in] attr
* Pointer to the flow attributes.
* @param[out] error
* Perform verbose error reporting if not NULL. Initialized in case of
* error only.
*
* @return
* 0 on success, otherwise negative errno value.
*/
static int
flow_dv_create_mtr_policy_acts(struct rte_eth_dev *dev,
struct mlx5_flow_meter_policy *mtr_policy,
const struct rte_flow_action *actions[RTE_COLORS],
struct rte_flow_attr *attr,
struct rte_mtr_error *error)
{
int ret, i;
uint16_t sub_policy_num;
for (i = 0; i < MLX5_MTR_DOMAIN_MAX; i++) {
sub_policy_num = (mtr_policy->sub_policy_num >>
(MLX5_MTR_SUB_POLICY_NUM_SHIFT * i)) &
MLX5_MTR_SUB_POLICY_NUM_MASK;
if (sub_policy_num) {
ret = __flow_dv_create_domain_policy_acts(dev,
mtr_policy, actions, attr,
(enum mlx5_meter_domain)i, error);
/* Cleaning resource is done in the caller level. */
if (ret)
return ret;
}
}
return 0;
}
/**
* Query a DV flow rule for its statistics via DevX.
*
* @param[in] dev
* Pointer to Ethernet device.
* @param[in] cnt_idx
* Index to the flow counter.
* @param[out] data
* Data retrieved by the query.
* @param[out] error
* Perform verbose error reporting if not NULL.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_query_count(struct rte_eth_dev *dev, uint32_t cnt_idx, void *data,
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct rte_flow_query_count *qc = data;
if (!priv->sh->cdev->config.devx)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"counters are not supported");
if (cnt_idx) {
uint64_t pkts, bytes;
struct mlx5_flow_counter *cnt;
int err = _flow_dv_query_count(dev, cnt_idx, &pkts, &bytes);
if (err)
return rte_flow_error_set(error, -err,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL, "cannot read counters");
cnt = flow_dv_counter_get_by_idx(dev, cnt_idx, NULL);
qc->hits_set = 1;
qc->bytes_set = 1;
qc->hits = pkts - cnt->hits;
qc->bytes = bytes - cnt->bytes;
if (qc->reset) {
cnt->hits = pkts;
cnt->bytes = bytes;
}
return 0;
}
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"counters are not available");
}
int
flow_dv_action_query(struct rte_eth_dev *dev,
const struct rte_flow_action_handle *handle, void *data,
struct rte_flow_error *error)
{
struct mlx5_age_param *age_param;
struct rte_flow_query_age *resp;
uint32_t act_idx = (uint32_t)(uintptr_t)handle;
uint32_t type = act_idx >> MLX5_INDIRECT_ACTION_TYPE_OFFSET;
uint32_t idx = act_idx & ((1u << MLX5_INDIRECT_ACTION_TYPE_OFFSET) - 1);
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_aso_ct_action *ct;
uint16_t owner;
uint32_t dev_idx;
switch (type) {
case MLX5_INDIRECT_ACTION_TYPE_AGE:
age_param = &flow_aso_age_get_by_idx(dev, idx)->age_params;
resp = data;
resp->aged = __atomic_load_n(&age_param->state,
__ATOMIC_RELAXED) == AGE_TMOUT ?
1 : 0;
resp->sec_since_last_hit_valid = !resp->aged;
if (resp->sec_since_last_hit_valid)
resp->sec_since_last_hit = __atomic_load_n
(&age_param->sec_since_last_hit, __ATOMIC_RELAXED);
return 0;
case MLX5_INDIRECT_ACTION_TYPE_COUNT:
return flow_dv_query_count(dev, idx, data, error);
case MLX5_INDIRECT_ACTION_TYPE_CT:
owner = (uint16_t)MLX5_INDIRECT_ACT_CT_GET_OWNER(idx);
if (owner != PORT_ID(priv))
return rte_flow_error_set(error, EACCES,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"CT object owned by another port");
dev_idx = MLX5_INDIRECT_ACT_CT_GET_IDX(idx);
ct = flow_aso_ct_get_by_dev_idx(dev, dev_idx);
MLX5_ASSERT(ct);
if (!ct->refcnt)
return rte_flow_error_set(error, EFAULT,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"CT object is inactive");
((struct rte_flow_action_conntrack *)data)->peer_port =
ct->peer;
((struct rte_flow_action_conntrack *)data)->is_original_dir =
ct->is_original;
if (mlx5_aso_ct_query_by_wqe(priv->sh, MLX5_HW_INV_QUEUE, ct,
data, NULL, true))
return rte_flow_error_set(error, EIO,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"Failed to query CT context");
return 0;
default:
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"action type query not supported");
}
}
/**
* Query a flow rule AGE action for aging information.
*
* @param[in] dev
* Pointer to Ethernet device.
* @param[in] flow
* Pointer to the sub flow.
* @param[out] data
* data retrieved by the query.
* @param[out] error
* Perform verbose error reporting if not NULL.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_query_age(struct rte_eth_dev *dev, struct rte_flow *flow,
void *data, struct rte_flow_error *error)
{
struct rte_flow_query_age *resp = data;
struct mlx5_age_param *age_param;
if (flow->age) {
struct mlx5_aso_age_action *act =
flow_aso_age_get_by_idx(dev, flow->age);
age_param = &act->age_params;
} else if (flow->counter) {
age_param = flow_dv_counter_idx_get_age(dev, flow->counter);
if (!age_param || !age_param->timeout)
return rte_flow_error_set
(error, EINVAL,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL, "cannot read age data");
} else {
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL, "age data not available");
}
resp->aged = __atomic_load_n(&age_param->state, __ATOMIC_RELAXED) ==
AGE_TMOUT ? 1 : 0;
resp->sec_since_last_hit_valid = !resp->aged;
if (resp->sec_since_last_hit_valid)
resp->sec_since_last_hit = __atomic_load_n
(&age_param->sec_since_last_hit, __ATOMIC_RELAXED);
return 0;
}
/**
* Query a flow.
*
* @see rte_flow_query()
* @see rte_flow_ops
*/
static int
flow_dv_query(struct rte_eth_dev *dev,
struct rte_flow *flow __rte_unused,
const struct rte_flow_action *actions __rte_unused,
void *data __rte_unused,
struct rte_flow_error *error __rte_unused)
{
int ret = -EINVAL;
for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
switch (actions->type) {
case RTE_FLOW_ACTION_TYPE_VOID:
break;
case RTE_FLOW_ACTION_TYPE_COUNT:
ret = flow_dv_query_count(dev, flow->counter, data,
error);
break;
case RTE_FLOW_ACTION_TYPE_AGE:
ret = flow_dv_query_age(dev, flow, data, error);
break;
default:
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
actions,
"action not supported");
}
}
return ret;
}
/**
* Destroy the meter table set.
* Lock free, (mutex should be acquired by caller).
*
* @param[in] dev
* Pointer to Ethernet device.
* @param[in] fm
* Meter information table.
*/
static void
flow_dv_destroy_mtr_tbls(struct rte_eth_dev *dev,
struct mlx5_flow_meter_info *fm)
{
struct mlx5_priv *priv = dev->data->dev_private;
int i;
if (!fm || !priv->sh->config.dv_flow_en)
return;
for (i = 0; i < MLX5_MTR_DOMAIN_MAX; i++) {
if (fm->drop_rule[i]) {
claim_zero(mlx5_flow_os_destroy_flow(fm->drop_rule[i]));
fm->drop_rule[i] = NULL;
}
}
}
static void
flow_dv_destroy_mtr_drop_tbls(struct rte_eth_dev *dev)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_flow_mtr_mng *mtrmng = priv->sh->mtrmng;
struct mlx5_flow_tbl_data_entry *tbl;
int i, j;
for (i = 0; i < MLX5_MTR_DOMAIN_MAX; i++) {
if (mtrmng->def_rule[i]) {
claim_zero(mlx5_flow_os_destroy_flow
(mtrmng->def_rule[i]));
mtrmng->def_rule[i] = NULL;
}
if (mtrmng->def_matcher[i]) {
tbl = container_of(mtrmng->def_matcher[i]->tbl,
struct mlx5_flow_tbl_data_entry, tbl);
mlx5_list_unregister(tbl->matchers,
&mtrmng->def_matcher[i]->entry);
mtrmng->def_matcher[i] = NULL;
}
for (j = 0; j < MLX5_REG_BITS; j++) {
if (mtrmng->drop_matcher[i][j]) {
tbl =
container_of(mtrmng->drop_matcher[i][j]->tbl,
struct mlx5_flow_tbl_data_entry,
tbl);
mlx5_list_unregister(tbl->matchers,
&mtrmng->drop_matcher[i][j]->entry);
mtrmng->drop_matcher[i][j] = NULL;
}
}
if (mtrmng->drop_tbl[i]) {
flow_dv_tbl_resource_release(MLX5_SH(dev),
mtrmng->drop_tbl[i]);
mtrmng->drop_tbl[i] = NULL;
}
}
}
/* Number of meter flow actions, count and jump or count and drop. */
#define METER_ACTIONS 2
static void
__flow_dv_destroy_domain_def_policy(struct rte_eth_dev *dev,
enum mlx5_meter_domain domain)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_flow_meter_def_policy *def_policy =
priv->sh->mtrmng->def_policy[domain];
__flow_dv_destroy_sub_policy_rules(dev, &def_policy->sub_policy);
mlx5_free(def_policy);
priv->sh->mtrmng->def_policy[domain] = NULL;
}
/**
* Destroy the default policy table set.
*
* @param[in] dev
* Pointer to Ethernet device.
*/
static void
flow_dv_destroy_def_policy(struct rte_eth_dev *dev)
{
struct mlx5_priv *priv = dev->data->dev_private;
int i;
for (i = 0; i < MLX5_MTR_DOMAIN_MAX; i++)
if (priv->sh->mtrmng->def_policy[i])
__flow_dv_destroy_domain_def_policy(dev,
(enum mlx5_meter_domain)i);
priv->sh->mtrmng->def_policy_id = MLX5_INVALID_POLICY_ID;
}
static int
__flow_dv_create_policy_flow(struct rte_eth_dev *dev,
uint32_t color_reg_c_idx,
enum rte_color color, void *matcher_object,
int actions_n, void *actions,
bool match_src_port, const struct rte_flow_item *item,
void **rule, const struct rte_flow_attr *attr)
{
int ret;
struct mlx5_flow_dv_match_params value = {
.size = sizeof(value.buf),
};
struct mlx5_priv *priv = dev->data->dev_private;
uint8_t misc_mask;
if (match_src_port && priv->sh->esw_mode) {
if (item && item->type == RTE_FLOW_ITEM_TYPE_REPRESENTED_PORT)
ret = flow_dv_translate_item_represented_port(dev, value.buf,
item, attr, MLX5_SET_MATCHER_SW_V);
else
ret = flow_dv_translate_item_port_id(dev, value.buf,
item, attr, MLX5_SET_MATCHER_SW_V);
if (ret) {
DRV_LOG(ERR, "Failed to create meter policy%d flow's"
" value with port.", color);
return -1;
}
}
flow_dv_match_meta_reg(value.buf, (enum modify_reg)color_reg_c_idx,
rte_col_2_mlx5_col(color), UINT32_MAX);
misc_mask = flow_dv_matcher_enable(value.buf);
__flow_dv_adjust_buf_size(&value.size, misc_mask);
ret = mlx5_flow_os_create_flow(matcher_object, (void *)&value,
actions_n, actions, rule);
if (ret) {
DRV_LOG(ERR, "Failed to create meter policy%d flow.", color);
return -1;
}
return 0;
}
static int
__flow_dv_create_policy_matcher(struct rte_eth_dev *dev,
uint32_t color_reg_c_idx,
uint16_t priority,
struct mlx5_flow_meter_sub_policy *sub_policy,
const struct rte_flow_attr *attr,
bool match_src_port,
const struct rte_flow_item *item,
struct mlx5_flow_dv_matcher **policy_matcher,
struct rte_flow_error *error)
{
struct mlx5_list_entry *entry;
struct mlx5_flow_tbl_resource *tbl_rsc = sub_policy->tbl_rsc;
struct mlx5_flow_dv_matcher matcher = {
.mask = {
.size = sizeof(matcher.mask.buf),
},
.tbl = tbl_rsc,
};
struct mlx5_flow_cb_ctx ctx = {
.error = error,
.data = &matcher,
};
struct mlx5_flow_tbl_data_entry *tbl_data;
struct mlx5_priv *priv = dev->data->dev_private;
const uint32_t color_mask = (UINT32_C(1) << MLX5_MTR_COLOR_BITS) - 1;
int ret;
if (match_src_port && priv->sh->esw_mode) {
if (item && item->type == RTE_FLOW_ITEM_TYPE_REPRESENTED_PORT)
ret = flow_dv_translate_item_represented_port(dev, matcher.mask.buf,
item, attr, MLX5_SET_MATCHER_SW_M);
else
ret = flow_dv_translate_item_port_id(dev, matcher.mask.buf,
item, attr, MLX5_SET_MATCHER_SW_M);
if (ret) {
DRV_LOG(ERR, "Failed to register meter policy%d matcher"
" with port.", priority);
return -1;
}
}
tbl_data = container_of(tbl_rsc, struct mlx5_flow_tbl_data_entry, tbl);
if (priority < RTE_COLOR_RED)
flow_dv_match_meta_reg(matcher.mask.buf,
(enum modify_reg)color_reg_c_idx, 0, color_mask);
matcher.priority = priority;
matcher.crc = rte_raw_cksum((const void *)matcher.mask.buf,
matcher.mask.size);
entry = mlx5_list_register(tbl_data->matchers, &ctx);
if (!entry) {
DRV_LOG(ERR, "Failed to register meter drop matcher.");
return -1;
}
*policy_matcher =
container_of(entry, struct mlx5_flow_dv_matcher, entry);
return 0;
}
/**
* Create the policy rules per domain.
*
* @param[in] dev
* Pointer to Ethernet device.
* @param[in] sub_policy
* Pointer to sub policy table..
* @param[in] egress
* Direction of the table.
* @param[in] transfer
* E-Switch or NIC flow.
* @param[in] acts
* Pointer to policy action list per color.
*
* @return
* 0 on success, -1 otherwise.
*/
static int
__flow_dv_create_domain_policy_rules(struct rte_eth_dev *dev,
struct mlx5_flow_meter_sub_policy *sub_policy,
uint8_t egress, uint8_t transfer, bool match_src_port,
struct mlx5_meter_policy_acts acts[RTE_COLORS])
{
struct mlx5_priv *priv = dev->data->dev_private;
struct rte_flow_error flow_err;
uint32_t color_reg_c_idx;
struct rte_flow_attr attr = {
.group = MLX5_FLOW_TABLE_LEVEL_POLICY,
.priority = 0,
.ingress = 0,
.egress = !!egress,
.transfer = !!transfer,
.reserved = 0,
};
int i;
int ret = mlx5_flow_get_reg_id(dev, MLX5_MTR_COLOR, 0, &flow_err);
struct mlx5_sub_policy_color_rule *color_rule;
bool svport_match;
struct mlx5_sub_policy_color_rule *tmp_rules[RTE_COLORS] = {NULL};
if (ret < 0)
return -1;
/* Create policy table with POLICY level. */
if (!sub_policy->tbl_rsc)
sub_policy->tbl_rsc = flow_dv_tbl_resource_get(dev,
MLX5_FLOW_TABLE_LEVEL_POLICY,
egress, transfer, false, NULL, 0, 0,
sub_policy->idx, &flow_err);
if (!sub_policy->tbl_rsc) {
DRV_LOG(ERR,
"Failed to create meter sub policy table.");
return -1;
}
/* Prepare matchers. */
color_reg_c_idx = ret;
for (i = 0; i < RTE_COLORS; i++) {
TAILQ_INIT(&sub_policy->color_rules[i]);
if (!acts[i].actions_n)
continue;
color_rule = mlx5_malloc(MLX5_MEM_ZERO,
sizeof(struct mlx5_sub_policy_color_rule),
0, SOCKET_ID_ANY);
if (!color_rule) {
DRV_LOG(ERR, "No memory to create color rule.");
goto err_exit;
}
tmp_rules[i] = color_rule;
TAILQ_INSERT_TAIL(&sub_policy->color_rules[i],
color_rule, next_port);
color_rule->src_port = priv->representor_id;
/* No use. */
attr.priority = i;
/* Create matchers for colors. */
svport_match = (i != RTE_COLOR_RED) ? match_src_port : false;
if (__flow_dv_create_policy_matcher(dev, color_reg_c_idx,
MLX5_MTR_POLICY_MATCHER_PRIO, sub_policy,
&attr, svport_match, NULL,
&color_rule->matcher, &flow_err)) {
DRV_LOG(ERR, "Failed to create color%u matcher.", i);
goto err_exit;
}
/* Create flow, matching color. */
if (__flow_dv_create_policy_flow(dev,
color_reg_c_idx, (enum rte_color)i,
color_rule->matcher->matcher_object,
acts[i].actions_n, acts[i].dv_actions,
svport_match, NULL, &color_rule->rule,
&attr)) {
DRV_LOG(ERR, "Failed to create color%u rule.", i);
goto err_exit;
}
}
return 0;
err_exit:
/* All the policy rules will be cleared. */
do {
color_rule = tmp_rules[i];
if (color_rule) {
if (color_rule->rule)
mlx5_flow_os_destroy_flow(color_rule->rule);
if (color_rule->matcher) {
struct mlx5_flow_tbl_data_entry *tbl =
container_of(color_rule->matcher->tbl,
typeof(*tbl), tbl);
mlx5_list_unregister(tbl->matchers,
&color_rule->matcher->entry);
}
TAILQ_REMOVE(&sub_policy->color_rules[i],
color_rule, next_port);
mlx5_free(color_rule);
}
} while (i--);
return -1;
}
static int
__flow_dv_create_policy_acts_rules(struct rte_eth_dev *dev,
struct mlx5_flow_meter_policy *mtr_policy,
struct mlx5_flow_meter_sub_policy *sub_policy,
uint32_t domain)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_meter_policy_acts acts[RTE_COLORS];
struct mlx5_flow_dv_tag_resource *tag;
struct mlx5_flow_dv_port_id_action_resource *port_action;
struct mlx5_hrxq *hrxq;
struct mlx5_flow_meter_info *next_fm[RTE_COLORS] = {NULL};
struct mlx5_flow_meter_policy *next_policy;
struct mlx5_flow_meter_sub_policy *next_sub_policy;
struct mlx5_flow_tbl_data_entry *tbl_data;
struct rte_flow_error error;
uint8_t egress = (domain == MLX5_MTR_DOMAIN_EGRESS) ? 1 : 0;
uint8_t transfer = (domain == MLX5_MTR_DOMAIN_TRANSFER) ? 1 : 0;
bool mtr_first = egress || (transfer && priv->representor_id != UINT16_MAX);
bool match_src_port = false;
int i;
/* If RSS or Queue, no previous actions / rules is created. */
for (i = 0; i < RTE_COLORS; i++) {
acts[i].actions_n = 0;
if (i == RTE_COLOR_RED) {
/* Only support drop on red. */
acts[i].dv_actions[0] =
mtr_policy->dr_drop_action[domain];
acts[i].actions_n = 1;
continue;
}
if (mtr_policy->act_cnt[i].fate_action == MLX5_FLOW_FATE_MTR) {
struct rte_flow_attr attr = {
.transfer = transfer
};
next_fm[i] = mlx5_flow_meter_find(priv,
mtr_policy->act_cnt[i].next_mtr_id,
NULL);
if (!next_fm[i]) {
DRV_LOG(ERR,
"Failed to get next hierarchy meter.");
goto err_exit;
}
if (mlx5_flow_meter_attach(priv, next_fm[i],
&attr, &error)) {
DRV_LOG(ERR, "%s", error.message);
next_fm[i] = NULL;
goto err_exit;
}
/* Meter action must be the first for TX. */
if (mtr_first) {
acts[i].dv_actions[acts[i].actions_n] =
(next_fm[i]->color_aware && i == RTE_COLOR_YELLOW) ?
next_fm[i]->meter_action_y :
next_fm[i]->meter_action_g;
acts[i].actions_n++;
}
}
if (mtr_policy->act_cnt[i].rix_mark) {
tag = mlx5_ipool_get(priv->sh->ipool[MLX5_IPOOL_TAG],
mtr_policy->act_cnt[i].rix_mark);
if (!tag) {
DRV_LOG(ERR, "Failed to find "
"mark action for policy.");
goto err_exit;
}
acts[i].dv_actions[acts[i].actions_n] = tag->action;
acts[i].actions_n++;
}
if (mtr_policy->act_cnt[i].modify_hdr) {
acts[i].dv_actions[acts[i].actions_n] =
mtr_policy->act_cnt[i].modify_hdr->action;
acts[i].actions_n++;
}
if (mtr_policy->act_cnt[i].fate_action) {
switch (mtr_policy->act_cnt[i].fate_action) {
case MLX5_FLOW_FATE_PORT_ID:
port_action = mlx5_ipool_get
(priv->sh->ipool[MLX5_IPOOL_PORT_ID],
mtr_policy->act_cnt[i].rix_port_id_action);
if (!port_action) {
DRV_LOG(ERR, "Failed to find "
"port action for policy.");
goto err_exit;
}
acts[i].dv_actions[acts[i].actions_n] =
port_action->action;
acts[i].actions_n++;
mtr_policy->dev = dev;
match_src_port = true;
break;
case MLX5_FLOW_FATE_DROP:
case MLX5_FLOW_FATE_JUMP:
acts[i].dv_actions[acts[i].actions_n] =
mtr_policy->act_cnt[i].dr_jump_action[domain];
acts[i].actions_n++;
break;
case MLX5_FLOW_FATE_SHARED_RSS:
case MLX5_FLOW_FATE_QUEUE:
hrxq = mlx5_ipool_get
(priv->sh->ipool[MLX5_IPOOL_HRXQ],
sub_policy->rix_hrxq[i]);
if (!hrxq) {
DRV_LOG(ERR, "Failed to find "
"queue action for policy.");
goto err_exit;
}
acts[i].dv_actions[acts[i].actions_n] =
hrxq->action;
acts[i].actions_n++;
break;
case MLX5_FLOW_FATE_MTR:
if (!next_fm[i]) {
DRV_LOG(ERR,
"No next hierarchy meter.");
goto err_exit;
}
if (!mtr_first) {
acts[i].dv_actions[acts[i].actions_n] =
(next_fm[i]->color_aware && i == RTE_COLOR_YELLOW) ?
next_fm[i]->meter_action_y :
next_fm[i]->meter_action_g;
acts[i].actions_n++;
}
if (mtr_policy->act_cnt[i].next_sub_policy) {
next_sub_policy =
mtr_policy->act_cnt[i].next_sub_policy;
} else {
next_policy =
mlx5_flow_meter_policy_find(dev,
next_fm[i]->policy_id, NULL);
MLX5_ASSERT(next_policy);
next_sub_policy =
next_policy->sub_policys[domain][0];
}
tbl_data =
container_of(next_sub_policy->tbl_rsc,
struct mlx5_flow_tbl_data_entry, tbl);
acts[i].dv_actions[acts[i].actions_n++] =
tbl_data->jump.action;
if (mtr_policy->act_cnt[i].modify_hdr)
match_src_port = !!transfer;
break;
default:
/*Queue action do nothing*/
break;
}
}
}
if (__flow_dv_create_domain_policy_rules(dev, sub_policy,
egress, transfer, match_src_port, acts)) {
DRV_LOG(ERR,
"Failed to create policy rules per domain.");
goto err_exit;
}
return 0;
err_exit:
for (i = 0; i < RTE_COLORS; i++)
if (next_fm[i])
mlx5_flow_meter_detach(priv, next_fm[i]);
return -1;
}
/**
* Create the policy rules.
*
* @param[in] dev
* Pointer to Ethernet device.
* @param[in,out] mtr_policy
* Pointer to meter policy table.
*
* @return
* 0 on success, -1 otherwise.
*/
static int
flow_dv_create_policy_rules(struct rte_eth_dev *dev,
struct mlx5_flow_meter_policy *mtr_policy)
{
int i;
uint16_t sub_policy_num;
for (i = 0; i < MLX5_MTR_DOMAIN_MAX; i++) {
sub_policy_num = (mtr_policy->sub_policy_num >>
(MLX5_MTR_SUB_POLICY_NUM_SHIFT * i)) &
MLX5_MTR_SUB_POLICY_NUM_MASK;
if (!sub_policy_num)
continue;
/* Prepare actions list and create policy rules. */
if (__flow_dv_create_policy_acts_rules(dev, mtr_policy,
mtr_policy->sub_policys[i][0], i)) {
DRV_LOG(ERR, "Failed to create policy action "
"list per domain.");
return -1;
}
}
return 0;
}
static int
__flow_dv_create_domain_def_policy(struct rte_eth_dev *dev, uint32_t domain)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_flow_mtr_mng *mtrmng = priv->sh->mtrmng;
struct mlx5_flow_meter_def_policy *def_policy;
struct mlx5_flow_tbl_resource *jump_tbl;
struct mlx5_flow_tbl_data_entry *tbl_data;
uint8_t egress, transfer;
struct rte_flow_error error;
struct mlx5_meter_policy_acts acts[RTE_COLORS];
int ret;
egress = (domain == MLX5_MTR_DOMAIN_EGRESS) ? 1 : 0;
transfer = (domain == MLX5_MTR_DOMAIN_TRANSFER) ? 1 : 0;
def_policy = mtrmng->def_policy[domain];
if (!def_policy) {
def_policy = mlx5_malloc(MLX5_MEM_ZERO,
sizeof(struct mlx5_flow_meter_def_policy),
RTE_CACHE_LINE_SIZE, SOCKET_ID_ANY);
if (!def_policy) {
DRV_LOG(ERR, "Failed to alloc default policy table.");
goto def_policy_error;
}
mtrmng->def_policy[domain] = def_policy;
/* Create the meter suffix table with SUFFIX level. */
jump_tbl = flow_dv_tbl_resource_get(dev,
MLX5_FLOW_TABLE_LEVEL_METER,
egress, transfer, false, NULL, 0,
0, MLX5_MTR_TABLE_ID_SUFFIX, &error);
if (!jump_tbl) {
DRV_LOG(ERR,
"Failed to create meter suffix table.");
goto def_policy_error;
}
def_policy->sub_policy.jump_tbl[RTE_COLOR_GREEN] = jump_tbl;
tbl_data = container_of(jump_tbl,
struct mlx5_flow_tbl_data_entry, tbl);
def_policy->dr_jump_action[RTE_COLOR_GREEN] =
tbl_data->jump.action;
acts[RTE_COLOR_GREEN].dv_actions[0] = tbl_data->jump.action;
acts[RTE_COLOR_GREEN].actions_n = 1;
/*
* YELLOW has the same default policy as GREEN does.
* G & Y share the same table and action. The 2nd time of table
* resource getting is just to update the reference count for
* the releasing stage.
*/
jump_tbl = flow_dv_tbl_resource_get(dev,
MLX5_FLOW_TABLE_LEVEL_METER,
egress, transfer, false, NULL, 0,
0, MLX5_MTR_TABLE_ID_SUFFIX, &error);
if (!jump_tbl) {
DRV_LOG(ERR,
"Failed to get meter suffix table.");
goto def_policy_error;
}
def_policy->sub_policy.jump_tbl[RTE_COLOR_YELLOW] = jump_tbl;
tbl_data = container_of(jump_tbl,
struct mlx5_flow_tbl_data_entry, tbl);
def_policy->dr_jump_action[RTE_COLOR_YELLOW] =
tbl_data->jump.action;
acts[RTE_COLOR_YELLOW].dv_actions[0] = tbl_data->jump.action;
acts[RTE_COLOR_YELLOW].actions_n = 1;
/* Create jump action to the drop table. */
if (!mtrmng->drop_tbl[domain]) {
mtrmng->drop_tbl[domain] = flow_dv_tbl_resource_get
(dev, MLX5_FLOW_TABLE_LEVEL_METER,
egress, transfer, false, NULL, 0,
0, MLX5_MTR_TABLE_ID_DROP, &error);
if (!mtrmng->drop_tbl[domain]) {
DRV_LOG(ERR, "Failed to create meter "
"drop table for default policy.");
goto def_policy_error;
}
}
/* all RED: unique Drop table for jump action. */
tbl_data = container_of(mtrmng->drop_tbl[domain],
struct mlx5_flow_tbl_data_entry, tbl);
def_policy->dr_jump_action[RTE_COLOR_RED] =
tbl_data->jump.action;
acts[RTE_COLOR_RED].dv_actions[0] = tbl_data->jump.action;
acts[RTE_COLOR_RED].actions_n = 1;
/* Create default policy rules. */
ret = __flow_dv_create_domain_policy_rules(dev,
&def_policy->sub_policy,
egress, transfer, false, acts);
if (ret) {
DRV_LOG(ERR, "Failed to create default policy rules.");
goto def_policy_error;
}
}
return 0;
def_policy_error:
__flow_dv_destroy_domain_def_policy(dev,
(enum mlx5_meter_domain)domain);
return -1;
}
/**
* Create the default policy table set.
*
* @param[in] dev
* Pointer to Ethernet device.
* @return
* 0 on success, -1 otherwise.
*/
static int
flow_dv_create_def_policy(struct rte_eth_dev *dev)
{
struct mlx5_priv *priv = dev->data->dev_private;
int i;
/* Non-termination policy table. */
for (i = 0; i < MLX5_MTR_DOMAIN_MAX; i++) {
if (!priv->sh->config.dv_esw_en &&
i == MLX5_MTR_DOMAIN_TRANSFER)
continue;
if (__flow_dv_create_domain_def_policy(dev, i)) {
DRV_LOG(ERR, "Failed to create default policy");
/* Rollback the created default policies for others. */
flow_dv_destroy_def_policy(dev);
return -1;
}
}
return 0;
}
/**
* Create the needed meter tables.
* Lock free, (mutex should be acquired by caller).
*
* @param[in] dev
* Pointer to Ethernet device.
* @param[in] fm
* Meter information table.
* @param[in] mtr_idx
* Meter index.
* @param[in] domain_bitmap
* Domain bitmap.
* @return
* 0 on success, -1 otherwise.
*/
static int
flow_dv_create_mtr_tbls(struct rte_eth_dev *dev,
struct mlx5_flow_meter_info *fm,
uint32_t mtr_idx,
uint8_t domain_bitmap)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_flow_mtr_mng *mtrmng = priv->sh->mtrmng;
struct rte_flow_error error;
struct mlx5_flow_tbl_data_entry *tbl_data;
uint8_t egress, transfer;
void *actions[METER_ACTIONS];
int domain, ret, i;
struct mlx5_flow_counter *cnt;
struct mlx5_flow_dv_match_params value = {
.size = sizeof(value.buf),
};
struct mlx5_flow_dv_match_params matcher_para = {
.size = sizeof(matcher_para.buf),
};
int mtr_id_reg_c = mlx5_flow_get_reg_id(dev, MLX5_MTR_ID,
0, &error);
uint32_t mtr_id_mask = (UINT32_C(1) << mtrmng->max_mtr_bits) - 1;
uint8_t mtr_id_offset = priv->mtr_reg_share ? MLX5_MTR_COLOR_BITS : 0;
struct mlx5_list_entry *entry;
struct mlx5_flow_dv_matcher matcher = {
.mask = {
.size = sizeof(matcher.mask.buf),
},
};
struct mlx5_flow_dv_matcher *drop_matcher;
struct mlx5_flow_cb_ctx ctx = {
.error = &error,
.data = &matcher,
};
uint8_t misc_mask;
if (!priv->mtr_en || mtr_id_reg_c < 0) {
rte_errno = ENOTSUP;
return -1;
}
for (domain = 0; domain < MLX5_MTR_DOMAIN_MAX; domain++) {
if (!(domain_bitmap & (1 << domain)) ||
(mtrmng->def_rule[domain] && !fm->drop_cnt))
continue;
egress = (domain == MLX5_MTR_DOMAIN_EGRESS) ? 1 : 0;
transfer = (domain == MLX5_MTR_DOMAIN_TRANSFER) ? 1 : 0;
/* Create the drop table with METER DROP level. */
if (!mtrmng->drop_tbl[domain]) {
mtrmng->drop_tbl[domain] = flow_dv_tbl_resource_get(dev,
MLX5_FLOW_TABLE_LEVEL_METER,
egress, transfer, false, NULL, 0,
0, MLX5_MTR_TABLE_ID_DROP, &error);
if (!mtrmng->drop_tbl[domain]) {
DRV_LOG(ERR, "Failed to create meter drop table.");
goto policy_error;
}
}
/* Create default matcher in drop table. */
matcher.tbl = mtrmng->drop_tbl[domain],
tbl_data = container_of(mtrmng->drop_tbl[domain],
struct mlx5_flow_tbl_data_entry, tbl);
if (!mtrmng->def_matcher[domain]) {
flow_dv_match_meta_reg_all(matcher.mask.buf, value.buf,
(enum modify_reg)mtr_id_reg_c,
0, 0);
matcher.priority = MLX5_MTRS_DEFAULT_RULE_PRIORITY;
matcher.crc = rte_raw_cksum
((const void *)matcher.mask.buf,
matcher.mask.size);
entry = mlx5_list_register(tbl_data->matchers, &ctx);
if (!entry) {
DRV_LOG(ERR, "Failed to register meter "
"drop default matcher.");
goto policy_error;
}
mtrmng->def_matcher[domain] = container_of(entry,
struct mlx5_flow_dv_matcher, entry);
}
/* Create default rule in drop table. */
if (!mtrmng->def_rule[domain]) {
i = 0;
actions[i++] = priv->sh->dr_drop_action;
flow_dv_match_meta_reg_all(matcher_para.buf, value.buf,
(enum modify_reg)mtr_id_reg_c, 0, 0);
misc_mask = flow_dv_matcher_enable(value.buf);
__flow_dv_adjust_buf_size(&value.size, misc_mask);
ret = mlx5_flow_os_create_flow
(mtrmng->def_matcher[domain]->matcher_object,
(void *)&value, i, actions,
&mtrmng->def_rule[domain]);
if (ret) {
DRV_LOG(ERR, "Failed to create meter "
"default drop rule for drop table.");
goto policy_error;
}
}
if (!fm->drop_cnt)
continue;
MLX5_ASSERT(mtrmng->max_mtr_bits);
if (!mtrmng->drop_matcher[domain][mtrmng->max_mtr_bits - 1]) {
/* Create matchers for Drop. */
flow_dv_match_meta_reg_all(matcher.mask.buf, value.buf,
(enum modify_reg)mtr_id_reg_c, 0,
(mtr_id_mask << mtr_id_offset));
matcher.priority = MLX5_REG_BITS - mtrmng->max_mtr_bits;
matcher.crc = rte_raw_cksum
((const void *)matcher.mask.buf,
matcher.mask.size);
entry = mlx5_list_register(tbl_data->matchers, &ctx);
if (!entry) {
DRV_LOG(ERR,
"Failed to register meter drop matcher.");
goto policy_error;
}
mtrmng->drop_matcher[domain][mtrmng->max_mtr_bits - 1] =
container_of(entry, struct mlx5_flow_dv_matcher,
entry);
}
drop_matcher =
mtrmng->drop_matcher[domain][mtrmng->max_mtr_bits - 1];
/* Create drop rule, matching meter_id only. */
flow_dv_match_meta_reg_all(matcher_para.buf, value.buf,
(enum modify_reg)mtr_id_reg_c,
(mtr_idx << mtr_id_offset), UINT32_MAX);
i = 0;
cnt = flow_dv_counter_get_by_idx(dev,
fm->drop_cnt, NULL);
actions[i++] = cnt->action;
actions[i++] = priv->sh->dr_drop_action;
misc_mask = flow_dv_matcher_enable(value.buf);
__flow_dv_adjust_buf_size(&value.size, misc_mask);
ret = mlx5_flow_os_create_flow(drop_matcher->matcher_object,
(void *)&value, i, actions,
&fm->drop_rule[domain]);
if (ret) {
DRV_LOG(ERR, "Failed to create meter "
"drop rule for drop table.");
goto policy_error;
}
}
return 0;
policy_error:
for (i = 0; i < MLX5_MTR_DOMAIN_MAX; i++) {
if (fm->drop_rule[i]) {
claim_zero(mlx5_flow_os_destroy_flow
(fm->drop_rule[i]));
fm->drop_rule[i] = NULL;
}
}
return -1;
}
static struct mlx5_flow_meter_sub_policy *
__flow_dv_meter_get_rss_sub_policy(struct rte_eth_dev *dev,
struct mlx5_flow_meter_policy *mtr_policy,
struct mlx5_flow_rss_desc *rss_desc[MLX5_MTR_RTE_COLORS],
struct mlx5_flow_meter_sub_policy *next_sub_policy,
bool *is_reuse)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_flow_meter_sub_policy *sub_policy = NULL;
uint32_t sub_policy_idx = 0;
uint32_t hrxq_idx[MLX5_MTR_RTE_COLORS] = {0};
uint32_t i, j;
struct mlx5_hrxq *hrxq;
struct mlx5_flow_handle dh;
struct mlx5_meter_policy_action_container *act_cnt;
uint32_t domain = MLX5_MTR_DOMAIN_INGRESS;
uint16_t sub_policy_num;
struct mlx5_flow_workspace *wks = mlx5_flow_get_thread_workspace();
MLX5_ASSERT(wks);
rte_spinlock_lock(&mtr_policy->sl);
for (i = 0; i < MLX5_MTR_RTE_COLORS; i++) {
if (!rss_desc[i])
continue;
hrxq = mlx5_hrxq_get(dev, rss_desc[i]);
if (!hrxq) {
rte_spinlock_unlock(&mtr_policy->sl);
return NULL;
}
hrxq_idx[i] = hrxq->idx;
}
sub_policy_num = (mtr_policy->sub_policy_num >>
(MLX5_MTR_SUB_POLICY_NUM_SHIFT * domain)) &
MLX5_MTR_SUB_POLICY_NUM_MASK;
for (j = 0; j < sub_policy_num; j++) {
for (i = 0; i < MLX5_MTR_RTE_COLORS; i++) {
if (rss_desc[i] &&
hrxq_idx[i] !=
mtr_policy->sub_policys[domain][j]->rix_hrxq[i])
break;
}
if (i >= MLX5_MTR_RTE_COLORS) {
/*
* Found the sub policy table with
* the same queue per color.
*/
rte_spinlock_unlock(&mtr_policy->sl);
for (i = 0; i < MLX5_MTR_RTE_COLORS; i++)
mlx5_hrxq_release(dev, hrxq_idx[i]);
*is_reuse = true;
return mtr_policy->sub_policys[domain][j];
}
}
/* Create sub policy. */
if (!mtr_policy->sub_policys[domain][0]->rix_hrxq[RTE_COLOR_GREEN] &&
!mtr_policy->sub_policys[domain][0]->rix_hrxq[RTE_COLOR_YELLOW]) {
/* Reuse the first pre-allocated sub_policy. */
sub_policy = mtr_policy->sub_policys[domain][0];
sub_policy_idx = sub_policy->idx;
} else {
sub_policy = mlx5_ipool_zmalloc
(priv->sh->ipool[MLX5_IPOOL_MTR_POLICY],
&sub_policy_idx);
if (!sub_policy ||
sub_policy_idx > MLX5_MAX_SUB_POLICY_TBL_NUM) {
for (i = 0; i < MLX5_MTR_RTE_COLORS; i++)
mlx5_hrxq_release(dev, hrxq_idx[i]);
goto rss_sub_policy_error;
}
sub_policy->idx = sub_policy_idx;
sub_policy->main_policy = mtr_policy;
}
for (i = 0; i < MLX5_MTR_RTE_COLORS; i++) {
if (!rss_desc[i])
continue;
sub_policy->rix_hrxq[i] = hrxq_idx[i];
if (mtr_policy->is_hierarchy) {
act_cnt = &mtr_policy->act_cnt[i];
act_cnt->next_sub_policy = next_sub_policy;
mlx5_hrxq_release(dev, hrxq_idx[i]);
} else {
/*
* Overwrite the last action from
* RSS action to Queue action.
*/
hrxq = mlx5_ipool_get(priv->sh->ipool[MLX5_IPOOL_HRXQ],
hrxq_idx[i]);
if (!hrxq) {
DRV_LOG(ERR, "Failed to get policy hrxq");
goto rss_sub_policy_error;
}
act_cnt = &mtr_policy->act_cnt[i];
if (act_cnt->rix_mark || act_cnt->modify_hdr) {
memset(&dh, 0, sizeof(struct mlx5_flow_handle));
if (act_cnt->rix_mark)
wks->mark = 1;
dh.fate_action = MLX5_FLOW_FATE_QUEUE;
dh.rix_hrxq = hrxq_idx[i];
flow_drv_rxq_flags_set(dev, &dh);
}
}
}
if (__flow_dv_create_policy_acts_rules(dev, mtr_policy,
sub_policy, domain)) {
DRV_LOG(ERR, "Failed to create policy "
"rules for ingress domain.");
goto rss_sub_policy_error;
}
if (sub_policy != mtr_policy->sub_policys[domain][0]) {
i = (mtr_policy->sub_policy_num >>
(MLX5_MTR_SUB_POLICY_NUM_SHIFT * domain)) &
MLX5_MTR_SUB_POLICY_NUM_MASK;
if (i >= MLX5_MTR_RSS_MAX_SUB_POLICY) {
DRV_LOG(ERR, "No free sub-policy slot.");
goto rss_sub_policy_error;
}
mtr_policy->sub_policys[domain][i] = sub_policy;
i++;
mtr_policy->sub_policy_num &= ~(MLX5_MTR_SUB_POLICY_NUM_MASK <<
(MLX5_MTR_SUB_POLICY_NUM_SHIFT * domain));
mtr_policy->sub_policy_num |=
(i & MLX5_MTR_SUB_POLICY_NUM_MASK) <<
(MLX5_MTR_SUB_POLICY_NUM_SHIFT * domain);
}
rte_spinlock_unlock(&mtr_policy->sl);
*is_reuse = false;
return sub_policy;
rss_sub_policy_error:
if (sub_policy) {
__flow_dv_destroy_sub_policy_rules(dev, sub_policy);
if (sub_policy != mtr_policy->sub_policys[domain][0]) {
i = (mtr_policy->sub_policy_num >>
(MLX5_MTR_SUB_POLICY_NUM_SHIFT * domain)) &
MLX5_MTR_SUB_POLICY_NUM_MASK;
mtr_policy->sub_policys[domain][i] = NULL;
mlx5_ipool_free(priv->sh->ipool[MLX5_IPOOL_MTR_POLICY],
sub_policy->idx);
}
}
rte_spinlock_unlock(&mtr_policy->sl);
return NULL;
}
/**
* Find the policy table for prefix table with RSS.
*
* @param[in] dev
* Pointer to Ethernet device.
* @param[in] mtr_policy
* Pointer to meter policy table.
* @param[in] rss_desc
* Pointer to rss_desc
* @return
* Pointer to table set on success, NULL otherwise and rte_errno is set.
*/
static struct mlx5_flow_meter_sub_policy *
flow_dv_meter_sub_policy_rss_prepare(struct rte_eth_dev *dev,
struct mlx5_flow_meter_policy *mtr_policy,
struct mlx5_flow_rss_desc *rss_desc[MLX5_MTR_RTE_COLORS])
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_flow_meter_sub_policy *sub_policy = NULL;
struct mlx5_flow_meter_info *next_fm;
struct mlx5_flow_meter_policy *next_policy;
struct mlx5_flow_meter_sub_policy *next_sub_policy = NULL;
struct mlx5_flow_meter_policy *policies[MLX5_MTR_CHAIN_MAX_NUM];
struct mlx5_flow_meter_sub_policy *sub_policies[MLX5_MTR_CHAIN_MAX_NUM];
uint32_t domain = MLX5_MTR_DOMAIN_INGRESS;
bool reuse_sub_policy;
uint32_t i = 0;
uint32_t j = 0;
while (true) {
/* Iterate hierarchy to get all policies in this hierarchy. */
policies[i++] = mtr_policy;
if (!mtr_policy->is_hierarchy)
break;
if (i >= MLX5_MTR_CHAIN_MAX_NUM) {
DRV_LOG(ERR, "Exceed max meter number in hierarchy.");
return NULL;
}
rte_spinlock_lock(&mtr_policy->sl);
next_fm = mlx5_flow_meter_hierarchy_next_meter(priv, mtr_policy, NULL);
rte_spinlock_unlock(&mtr_policy->sl);
if (!next_fm) {
DRV_LOG(ERR, "Failed to get next meter in hierarchy.");
return NULL;
}
next_policy =
mlx5_flow_meter_policy_find(dev, next_fm->policy_id,
NULL);
MLX5_ASSERT(next_policy);
mtr_policy = next_policy;
}
while (i) {
/**
* From last policy to the first one in hierarchy,
* create / get the sub policy for each of them.
*/
sub_policy = __flow_dv_meter_get_rss_sub_policy(dev,
policies[--i],
rss_desc,
next_sub_policy,
&reuse_sub_policy);
if (!sub_policy) {
DRV_LOG(ERR, "Failed to get the sub policy.");
goto err_exit;
}
if (!reuse_sub_policy)
sub_policies[j++] = sub_policy;
next_sub_policy = sub_policy;
}
return sub_policy;
err_exit:
while (j) {
uint16_t sub_policy_num;
sub_policy = sub_policies[--j];
mtr_policy = sub_policy->main_policy;
__flow_dv_destroy_sub_policy_rules(dev, sub_policy);
if (sub_policy != mtr_policy->sub_policys[domain][0]) {
sub_policy_num = (mtr_policy->sub_policy_num >>
(MLX5_MTR_SUB_POLICY_NUM_SHIFT * domain)) &
MLX5_MTR_SUB_POLICY_NUM_MASK;
mtr_policy->sub_policys[domain][sub_policy_num - 1] =
NULL;
sub_policy_num--;
mtr_policy->sub_policy_num &=
~(MLX5_MTR_SUB_POLICY_NUM_MASK <<
(MLX5_MTR_SUB_POLICY_NUM_SHIFT * i));
mtr_policy->sub_policy_num |=
(sub_policy_num & MLX5_MTR_SUB_POLICY_NUM_MASK) <<
(MLX5_MTR_SUB_POLICY_NUM_SHIFT * i);
mlx5_ipool_free(priv->sh->ipool[MLX5_IPOOL_MTR_POLICY],
sub_policy->idx);
}
}
return NULL;
}
/**
* Check if need to create hierarchy tag rule.
*
* @param[in] priv
* Pointer to mlx5_priv.
* @param[in] mtr_policy
* Pointer to current meter policy.
* @param[in] src_port
* The src port this extra rule should use.
* @param[out] next_fm
* Pointer to next meter in hierarchy.
* @param[out] skip
* Indicate if skip the tag rule creation.
* @param[out] error
* Perform verbose error reporting if not NULL.
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
mlx5_meter_hierarchy_skip_tag_rule(struct mlx5_priv *priv,
struct mlx5_flow_meter_policy *mtr_policy,
int32_t src_port,
struct mlx5_flow_meter_info **next_fm,
bool *skip,
struct rte_flow_error *error)
{
struct mlx5_flow_meter_sub_policy *sub_policy;
struct mlx5_sub_policy_color_rule *color_rule;
uint32_t domain = MLX5_MTR_DOMAIN_TRANSFER;
int ret = 0;
int i;
*next_fm = NULL;
*skip = false;
rte_spinlock_lock(&mtr_policy->sl);
if (!mtr_policy->is_hierarchy)
goto exit;
*next_fm = mlx5_flow_meter_hierarchy_next_meter(priv, mtr_policy, NULL);
if (!*next_fm) {
ret = rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_ACTION,
NULL, "Failed to find next meter in hierarchy.");
goto exit;
}
if (!(*next_fm)->drop_cnt) {
*skip = true;
goto exit;
}
sub_policy = mtr_policy->sub_policys[domain][0];
for (i = 0; i < MLX5_MTR_RTE_COLORS; i++) {
if (mtr_policy->act_cnt[i].fate_action != MLX5_FLOW_FATE_MTR)
continue;
TAILQ_FOREACH(color_rule, &sub_policy->color_rules[i], next_port)
if (color_rule->src_port == src_port) {
*skip = true;
goto exit;
}
}
exit:
rte_spinlock_unlock(&mtr_policy->sl);
return ret;
}
/**
* Create the sub policy tag rule for all meters in hierarchy.
*
* @param[in] dev
* Pointer to Ethernet device.
* @param[in] fm
* Meter information table.
* @param[in] src_port
* The src port this extra rule should use.
* @param[in] item
* The src port match item.
* @param[out] error
* Perform verbose error reporting if not NULL.
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
flow_dv_meter_hierarchy_rule_create(struct rte_eth_dev *dev,
struct mlx5_flow_meter_info *fm,
int32_t src_port,
const struct rte_flow_item *item,
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_flow_meter_policy *mtr_policy;
struct mlx5_flow_meter_sub_policy *sub_policy;
struct mlx5_flow_meter_info *next_fm = NULL;
struct mlx5_flow_meter_policy *next_policy;
struct mlx5_flow_meter_sub_policy *next_sub_policy;
struct mlx5_flow_tbl_data_entry *tbl_data;
struct mlx5_sub_policy_color_rule *color_rule;
struct mlx5_meter_policy_acts acts;
uint32_t color_reg_c_idx;
bool mtr_first = (src_port != UINT16_MAX) ? true : false;
struct rte_flow_attr attr = {
.group = MLX5_FLOW_TABLE_LEVEL_POLICY,
.priority = 0,
.ingress = 0,
.egress = 0,
.transfer = 1,
.reserved = 0,
};
uint32_t domain = MLX5_MTR_DOMAIN_TRANSFER;
struct {
struct mlx5_flow_meter_policy *fm_policy;
struct mlx5_flow_meter_info *next_fm;
struct mlx5_sub_policy_color_rule *tag_rule[MLX5_MTR_RTE_COLORS];
} fm_info[MLX5_MTR_CHAIN_MAX_NUM] = { {0} };
uint32_t fm_cnt = 0;
uint32_t i, j;
color_reg_c_idx = mlx5_flow_get_reg_id(dev, MLX5_MTR_COLOR, 0, error);
/* Get all fms who need to create the tag color rule. */
do {
bool skip = false;
mtr_policy = mlx5_flow_meter_policy_find(dev, fm->policy_id, NULL);
MLX5_ASSERT(mtr_policy);
if (mlx5_meter_hierarchy_skip_tag_rule(priv, mtr_policy, src_port,
&next_fm, &skip, error))
goto err_exit;
if (next_fm && !skip) {
fm_info[fm_cnt].fm_policy = mtr_policy;
fm_info[fm_cnt].next_fm = next_fm;
if (++fm_cnt >= MLX5_MTR_CHAIN_MAX_NUM) {
rte_flow_error_set(error, errno,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"Exceed max meter number in hierarchy.");
goto err_exit;
}
}
fm = next_fm;
} while (fm);
/* Create tag color rules for all needed fms. */
for (i = 0; i < fm_cnt; i++) {
void *mtr_action;
mtr_policy = fm_info[i].fm_policy;
rte_spinlock_lock(&mtr_policy->sl);
sub_policy = mtr_policy->sub_policys[domain][0];
for (j = 0; j < MLX5_MTR_RTE_COLORS; j++) {
if (mtr_policy->act_cnt[j].fate_action != MLX5_FLOW_FATE_MTR)
continue;
color_rule = mlx5_malloc(MLX5_MEM_ZERO,
sizeof(struct mlx5_sub_policy_color_rule),
0, SOCKET_ID_ANY);
if (!color_rule) {
rte_spinlock_unlock(&mtr_policy->sl);
rte_flow_error_set(error, ENOMEM,
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"No memory to create tag color rule.");
goto err_exit;
}
color_rule->src_port = src_port;
next_fm = fm_info[i].next_fm;
if (mlx5_flow_meter_attach(priv, next_fm, &attr, error)) {
mlx5_free(color_rule);
rte_spinlock_unlock(&mtr_policy->sl);
goto err_exit;
}
fm_info[i].tag_rule[j] = color_rule;
TAILQ_INSERT_TAIL(&sub_policy->color_rules[j], color_rule, next_port);
/* Prepare to create color rule. */
mtr_action = (next_fm->color_aware && j == RTE_COLOR_YELLOW) ?
next_fm->meter_action_y :
next_fm->meter_action_g;
next_policy = mlx5_flow_meter_policy_find(dev, next_fm->policy_id, NULL);
MLX5_ASSERT(next_policy);
next_sub_policy = next_policy->sub_policys[domain][0];
tbl_data = container_of(next_sub_policy->tbl_rsc,
struct mlx5_flow_tbl_data_entry, tbl);
if (mtr_first) {
acts.dv_actions[0] = mtr_action;
acts.dv_actions[1] = mtr_policy->act_cnt[j].modify_hdr->action;
} else {
acts.dv_actions[0] = mtr_policy->act_cnt[j].modify_hdr->action;
acts.dv_actions[1] = mtr_action;
}
acts.dv_actions[2] = tbl_data->jump.action;
acts.actions_n = 3;
if (__flow_dv_create_policy_matcher(dev, color_reg_c_idx,
MLX5_MTR_POLICY_MATCHER_PRIO, sub_policy,
&attr, true, item, &color_rule->matcher, error)) {
rte_spinlock_unlock(&mtr_policy->sl);
rte_flow_error_set(error, errno,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"Failed to create hierarchy meter matcher.");
goto err_exit;
}
if (__flow_dv_create_policy_flow(dev, color_reg_c_idx, (enum rte_color)j,
color_rule->matcher->matcher_object,
acts.actions_n, acts.dv_actions,
true, item, &color_rule->rule, &attr)) {
rte_spinlock_unlock(&mtr_policy->sl);
rte_flow_error_set(error, errno,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"Failed to create hierarchy meter rule.");
goto err_exit;
}
}
rte_spinlock_unlock(&mtr_policy->sl);
}
return 0;
err_exit:
for (i = 0; i < fm_cnt; i++) {
mtr_policy = fm_info[i].fm_policy;
rte_spinlock_lock(&mtr_policy->sl);
sub_policy = mtr_policy->sub_policys[domain][0];
for (j = 0; j < MLX5_MTR_RTE_COLORS; j++) {
color_rule = fm_info[i].tag_rule[j];
if (!color_rule)
continue;
if (color_rule->rule)
mlx5_flow_os_destroy_flow(color_rule->rule);
if (color_rule->matcher) {
struct mlx5_flow_tbl_data_entry *tbl =
container_of(color_rule->matcher->tbl, typeof(*tbl), tbl);
mlx5_list_unregister(tbl->matchers, &color_rule->matcher->entry);
}
if (fm_info[i].next_fm)
mlx5_flow_meter_detach(priv, fm_info[i].next_fm);
TAILQ_REMOVE(&sub_policy->color_rules[j], color_rule, next_port);
mlx5_free(color_rule);
}
rte_spinlock_unlock(&mtr_policy->sl);
}
return -rte_errno;
}
/**
* Destroy the sub policy table with RX queue.
*
* @param[in] dev
* Pointer to Ethernet device.
* @param[in] mtr_policy
* Pointer to meter policy table.
*/
static void
flow_dv_destroy_sub_policy_with_rxq(struct rte_eth_dev *dev,
struct mlx5_flow_meter_policy *mtr_policy)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_flow_meter_sub_policy *sub_policy = NULL;
uint32_t domain = MLX5_MTR_DOMAIN_INGRESS;
uint32_t i, j;
uint16_t sub_policy_num, new_policy_num;
rte_spinlock_lock(&mtr_policy->sl);
for (i = 0; i < MLX5_MTR_RTE_COLORS; i++) {
switch (mtr_policy->act_cnt[i].fate_action) {
case MLX5_FLOW_FATE_SHARED_RSS:
sub_policy_num = (mtr_policy->sub_policy_num >>
(MLX5_MTR_SUB_POLICY_NUM_SHIFT * domain)) &
MLX5_MTR_SUB_POLICY_NUM_MASK;
new_policy_num = sub_policy_num;
for (j = 0; j < sub_policy_num; j++) {
sub_policy =
mtr_policy->sub_policys[domain][j];
if (sub_policy) {
__flow_dv_destroy_sub_policy_rules(dev,
sub_policy);
if (sub_policy !=
mtr_policy->sub_policys[domain][0]) {
mtr_policy->sub_policys[domain][j] =
NULL;
mlx5_ipool_free
(priv->sh->ipool[MLX5_IPOOL_MTR_POLICY],
sub_policy->idx);
new_policy_num--;
}
}
}
if (new_policy_num != sub_policy_num) {
mtr_policy->sub_policy_num &=
~(MLX5_MTR_SUB_POLICY_NUM_MASK <<
(MLX5_MTR_SUB_POLICY_NUM_SHIFT * domain));
mtr_policy->sub_policy_num |=
(new_policy_num &
MLX5_MTR_SUB_POLICY_NUM_MASK) <<
(MLX5_MTR_SUB_POLICY_NUM_SHIFT * domain);
}
break;
case MLX5_FLOW_FATE_QUEUE:
sub_policy = mtr_policy->sub_policys[domain][0];
__flow_dv_destroy_sub_policy_rules(dev,
sub_policy);
break;
default:
/*Other actions without queue and do nothing*/
break;
}
}
rte_spinlock_unlock(&mtr_policy->sl);
}
/**
* Check whether the DR drop action is supported on the root table or not.
*
* Create a simple flow with DR drop action on root table to validate
* if DR drop action on root table is supported or not.
*
* @param[in] dev
* Pointer to rte_eth_dev structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_flow_discover_dr_action_support(struct rte_eth_dev *dev)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_dev_ctx_shared *sh = priv->sh;
struct mlx5_flow_dv_match_params mask = {
.size = sizeof(mask.buf),
};
struct mlx5_flow_dv_match_params value = {
.size = sizeof(value.buf),
};
struct mlx5dv_flow_matcher_attr dv_attr = {
.type = IBV_FLOW_ATTR_NORMAL,
.priority = 0,
.match_criteria_enable = 0,
.match_mask = (void *)&mask,
};
struct mlx5_flow_tbl_resource *tbl = NULL;
void *matcher = NULL;
void *flow = NULL;
int ret = -1;
tbl = flow_dv_tbl_resource_get(dev, 0, 0, 0, false, NULL,
0, 0, 0, NULL);
if (!tbl)
goto err;
dv_attr.match_criteria_enable = flow_dv_matcher_enable(mask.buf);
__flow_dv_adjust_buf_size(&mask.size, dv_attr.match_criteria_enable);
ret = mlx5_flow_os_create_flow_matcher(sh->cdev->ctx, &dv_attr,
tbl->obj, &matcher);
if (ret)
goto err;
__flow_dv_adjust_buf_size(&value.size, dv_attr.match_criteria_enable);
ret = mlx5_flow_os_create_flow(matcher, (void *)&value, 1,
&sh->dr_drop_action, &flow);
err:
/*
* If DR drop action is not supported on root table, flow create will
* be failed with EOPNOTSUPP or EPROTONOSUPPORT.
*/
if (!flow) {
if (matcher &&
(errno == EPROTONOSUPPORT || errno == EOPNOTSUPP))
DRV_LOG(INFO, "DR drop action is not supported in root table.");
else
DRV_LOG(ERR, "Unexpected error in DR drop action support detection");
ret = -1;
} else {
claim_zero(mlx5_flow_os_destroy_flow(flow));
}
if (matcher)
claim_zero(mlx5_flow_os_destroy_flow_matcher(matcher));
if (tbl)
flow_dv_tbl_resource_release(MLX5_SH(dev), tbl);
return ret;
}
/**
* Validate the batch counter support in root table.
*
* Create a simple flow with invalid counter and drop action on root table to
* validate if batch counter with offset on root table is supported or not.
*
* @param[in] dev
* Pointer to rte_eth_dev structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_flow_dv_discover_counter_offset_support(struct rte_eth_dev *dev)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_dev_ctx_shared *sh = priv->sh;
struct mlx5_flow_dv_match_params mask = {
.size = sizeof(mask.buf),
};
struct mlx5_flow_dv_match_params value = {
.size = sizeof(value.buf),
};
struct mlx5dv_flow_matcher_attr dv_attr = {
.type = IBV_FLOW_ATTR_NORMAL | IBV_FLOW_ATTR_FLAGS_EGRESS,
.priority = 0,
.match_criteria_enable = 0,
.match_mask = (void *)&mask,
};
void *actions[2] = { 0 };
struct mlx5_flow_tbl_resource *tbl = NULL;
struct mlx5_devx_obj *dcs = NULL;
void *matcher = NULL;
void *flow = NULL;
int ret = -1;
tbl = flow_dv_tbl_resource_get(dev, 0, 1, 0, false, NULL,
0, 0, 0, NULL);
if (!tbl)
goto err;
dcs = mlx5_devx_cmd_flow_counter_alloc(priv->sh->cdev->ctx, 0x4);
if (!dcs)
goto err;
ret = mlx5_flow_os_create_flow_action_count(dcs->obj, UINT16_MAX,
&actions[0]);
if (ret)
goto err;
dv_attr.match_criteria_enable = flow_dv_matcher_enable(mask.buf);
__flow_dv_adjust_buf_size(&mask.size, dv_attr.match_criteria_enable);
ret = mlx5_flow_os_create_flow_matcher(sh->cdev->ctx, &dv_attr,
tbl->obj, &matcher);
if (ret)
goto err;
__flow_dv_adjust_buf_size(&value.size, dv_attr.match_criteria_enable);
ret = mlx5_flow_os_create_flow(matcher, (void *)&value, 1,
actions, &flow);
err:
/*
* If batch counter with offset is not supported, the driver will not
* validate the invalid offset value, flow create should success.
* In this case, it means batch counter is not supported in root table.
*
* Otherwise, if flow create is failed, counter offset is supported.
*/
if (flow) {
DRV_LOG(INFO, "Batch counter is not supported in root "
"table. Switch to fallback mode.");
rte_errno = ENOTSUP;
ret = -rte_errno;
claim_zero(mlx5_flow_os_destroy_flow(flow));
} else {
/* Check matcher to make sure validate fail at flow create. */
if (!matcher || (matcher && errno != EINVAL))
DRV_LOG(ERR, "Unexpected error in counter offset "
"support detection");
ret = 0;
}
if (actions[0])
claim_zero(mlx5_flow_os_destroy_flow_action(actions[0]));
if (matcher)
claim_zero(mlx5_flow_os_destroy_flow_matcher(matcher));
if (tbl)
flow_dv_tbl_resource_release(MLX5_SH(dev), tbl);
if (dcs)
claim_zero(mlx5_devx_cmd_destroy(dcs));
return ret;
}
/**
* Query a devx counter.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[in] cnt
* Index to the flow counter.
* @param[in] clear
* Set to clear the counter statistics.
* @param[out] pkts
* The statistics value of packets.
* @param[out] bytes
* The statistics value of bytes.
*
* @return
* 0 on success, otherwise return -1.
*/
static int
flow_dv_counter_query(struct rte_eth_dev *dev, uint32_t counter, bool clear,
uint64_t *pkts, uint64_t *bytes, void **action)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_flow_counter *cnt;
uint64_t inn_pkts, inn_bytes;
int ret;
if (!priv->sh->cdev->config.devx)
return -1;
ret = _flow_dv_query_count(dev, counter, &inn_pkts, &inn_bytes);
if (ret)
return -1;
cnt = flow_dv_counter_get_by_idx(dev, counter, NULL);
if (cnt && action)
*action = cnt->action;
*pkts = inn_pkts - cnt->hits;
*bytes = inn_bytes - cnt->bytes;
if (clear) {
cnt->hits = inn_pkts;
cnt->bytes = inn_bytes;
}
return 0;
}
/**
* Get aged-out flows.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[in] context
* The address of an array of pointers to the aged-out flows contexts.
* @param[in] nb_contexts
* The length of context array pointers.
* @param[out] error
* Perform verbose error reporting if not NULL. Initialized in case of
* error only.
*
* @return
* how many contexts get in success, otherwise negative errno value.
* if nb_contexts is 0, return the amount of all aged contexts.
* if nb_contexts is not 0 , return the amount of aged flows reported
* in the context array.
* @note: only stub for now
*/
static int
flow_dv_get_aged_flows(struct rte_eth_dev *dev,
void **context,
uint32_t nb_contexts,
struct rte_flow_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_age_info *age_info;
struct mlx5_age_param *age_param;
struct mlx5_flow_counter *counter;
struct mlx5_aso_age_action *act;
int nb_flows = 0;
if (nb_contexts && !context)
return rte_flow_error_set(error, EINVAL,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL, "empty context");
age_info = GET_PORT_AGE_INFO(priv);
rte_spinlock_lock(&age_info->aged_sl);
LIST_FOREACH(act, &age_info->aged_aso, next) {
nb_flows++;
if (nb_contexts) {
context[nb_flows - 1] =
act->age_params.context;
if (!(--nb_contexts))
break;
}
}
TAILQ_FOREACH(counter, &age_info->aged_counters, next) {
nb_flows++;
if (nb_contexts) {
age_param = MLX5_CNT_TO_AGE(counter);
context[nb_flows - 1] = age_param->context;
if (!(--nb_contexts))
break;
}
}
rte_spinlock_unlock(&age_info->aged_sl);
MLX5_AGE_SET(age_info, MLX5_AGE_TRIGGER);
return nb_flows;
}
/*
* Mutex-protected thunk to lock-free flow_dv_counter_alloc().
*/
static uint32_t
flow_dv_counter_allocate(struct rte_eth_dev *dev)
{
return flow_dv_counter_alloc(dev, 0);
}
/**
* Validate indirect action.
* Dispatcher for action type specific validation.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[in] conf
* Indirect action configuration.
* @param[in] action
* The indirect action object to validate.
* @param[out] error
* Perform verbose error reporting if not NULL. Initialized in case of
* error only.
*
* @return
* 0 on success, otherwise negative errno value.
*/
int
flow_dv_action_validate(struct rte_eth_dev *dev,
const struct rte_flow_indir_action_conf *conf,
const struct rte_flow_action *action,
struct rte_flow_error *err)
{
struct mlx5_priv *priv = dev->data->dev_private;
/* called from RTE API */
RTE_SET_USED(conf);
switch (action->type) {
case RTE_FLOW_ACTION_TYPE_RSS:
/*
* priv->obj_ops is set according to driver capabilities.
* When DevX capabilities are
* sufficient, it is set to devx_obj_ops.
* Otherwise, it is set to ibv_obj_ops.
* ibv_obj_ops doesn't support ind_table_modify operation.
* In this case the indirect RSS action can't be used.
*/
if (priv->obj_ops.ind_table_modify == NULL)
return rte_flow_error_set
(err, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"Indirect RSS action not supported");
return mlx5_validate_action_rss(dev, action, err);
case RTE_FLOW_ACTION_TYPE_AGE:
if (!priv->sh->aso_age_mng)
return rte_flow_error_set(err, ENOTSUP,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
NULL,
"Indirect age action not supported");
return flow_dv_validate_action_age(0, action, dev, err);
case RTE_FLOW_ACTION_TYPE_COUNT:
return flow_dv_validate_action_count(dev, true, 0, false, err);
case RTE_FLOW_ACTION_TYPE_CONNTRACK:
if (!priv->sh->ct_aso_en)
return rte_flow_error_set(err, ENOTSUP,
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
"ASO CT is not supported");
return mlx5_validate_action_ct(dev, action->conf, err);
default:
return rte_flow_error_set(err, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
NULL,
"action type not supported");
}
}
/*
* Check if the RSS configurations for colors of a meter policy match
* each other, except the queues.
*
* @param[in] r1
* Pointer to the first RSS flow action.
* @param[in] r2
* Pointer to the second RSS flow action.
*
* @return
* 0 on match, 1 on conflict.
*/
static inline int
flow_dv_mtr_policy_rss_compare(const struct rte_flow_action_rss *r1,
const struct rte_flow_action_rss *r2)
{
if (r1 == NULL || r2 == NULL)
return 0;
if (!(r1->level <= 1 && r2->level <= 1) &&
!(r1->level > 1 && r2->level > 1))
return 1;
if (r1->types != r2->types &&
!((r1->types == 0 || r1->types == RTE_ETH_RSS_IP) &&
(r2->types == 0 || r2->types == RTE_ETH_RSS_IP)))
return 1;
if (r1->key || r2->key) {
const void *key1 = r1->key ? r1->key : rss_hash_default_key;
const void *key2 = r2->key ? r2->key : rss_hash_default_key;
if (memcmp(key1, key2, MLX5_RSS_HASH_KEY_LEN))
return 1;
}
return 0;
}
/**
* Validate the meter hierarchy chain for meter policy.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[in] meter_id
* Meter id.
* @param[in] action_flags
* Holds the actions detected until now.
* @param[out] is_rss
* Is RSS or not.
* @param[out] hierarchy_domain
* The domain bitmap for hierarchy policy.
* @param[out] error
* Perform verbose error reporting if not NULL. Initialized in case of
* error only.
*
* @return
* 0 on success, otherwise negative errno value with error set.
*/
static int
flow_dv_validate_policy_mtr_hierarchy(struct rte_eth_dev *dev,
uint32_t meter_id,
uint64_t action_flags,
bool *is_rss,
uint8_t *hierarchy_domain,
struct rte_mtr_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_flow_meter_info *fm;
struct mlx5_flow_meter_policy *policy;
uint8_t cnt = 1;
if (action_flags & (MLX5_FLOW_FATE_ACTIONS |
MLX5_FLOW_FATE_ESWITCH_ACTIONS))
return -rte_mtr_error_set(error, EINVAL,
RTE_MTR_ERROR_TYPE_POLICER_ACTION_GREEN,
NULL,
"Multiple fate actions not supported.");
*hierarchy_domain = 0;
fm = mlx5_flow_meter_find(priv, meter_id, NULL);
while (true) {
if (!fm)
return -rte_mtr_error_set(error, EINVAL,
RTE_MTR_ERROR_TYPE_MTR_ID, NULL,
"Meter not found in meter hierarchy.");
if (fm->def_policy)
return -rte_mtr_error_set(error, EINVAL,
RTE_MTR_ERROR_TYPE_MTR_ID, NULL,
"Non termination meter not supported in hierarchy.");
if (!fm->shared)
return -rte_mtr_error_set(error, EINVAL,
RTE_MTR_ERROR_TYPE_MTR_ID, NULL,
"Only shared meter supported in hierarchy.");
policy = mlx5_flow_meter_policy_find(dev, fm->policy_id, NULL);
MLX5_ASSERT(policy);
/**
* Only inherit the supported domains of the first meter in
* hierarchy.
* One meter supports at least one domain.
*/
if (!*hierarchy_domain) {
if (policy->transfer)
*hierarchy_domain |=
MLX5_MTR_DOMAIN_TRANSFER_BIT;
if (policy->ingress)
*hierarchy_domain |=
MLX5_MTR_DOMAIN_INGRESS_BIT;
if (policy->egress)
*hierarchy_domain |= MLX5_MTR_DOMAIN_EGRESS_BIT;
}
if (!policy->is_hierarchy) {
*is_rss = policy->is_rss;
break;
}
rte_spinlock_lock(&policy->sl);
fm = mlx5_flow_meter_hierarchy_next_meter(priv, policy, NULL);
rte_spinlock_unlock(&policy->sl);
if (++cnt >= MLX5_MTR_CHAIN_MAX_NUM)
return -rte_mtr_error_set(error, EINVAL,
RTE_MTR_ERROR_TYPE_METER_POLICY, NULL,
"Exceed max hierarchy meter number.");
}
return 0;
}
/**
* Validate meter policy actions.
* Dispatcher for action type specific validation.
*
* @param[in] dev
* Pointer to the Ethernet device structure.
* @param[in] action
* The meter policy action object to validate.
* @param[in] attr
* Attributes of flow to determine steering domain.
* @param[out] error
* Perform verbose error reporting if not NULL. Initialized in case of
* error only.
*
* @return
* 0 on success, otherwise negative errno value.
*/
static int
flow_dv_validate_mtr_policy_acts(struct rte_eth_dev *dev,
const struct rte_flow_action *actions[RTE_COLORS],
struct rte_flow_attr *attr,
bool *is_rss,
uint8_t *domain_bitmap,
uint8_t *policy_mode,
struct rte_mtr_error *error)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_sh_config *dev_conf = &priv->sh->config;
const struct rte_flow_action *act;
uint64_t action_flags[RTE_COLORS] = {0};
int actions_n;
int i, ret;
struct rte_flow_error flow_err;
uint8_t domain_color[RTE_COLORS] = {0};
uint8_t def_domain = MLX5_MTR_ALL_DOMAIN_BIT;
uint8_t hierarchy_domain = 0;
const struct rte_flow_action_meter *mtr;
const struct rte_flow_action_meter *next_mtr = NULL;
bool def_green = false;
bool def_yellow = false;
const struct rte_flow_action_rss *rss_color[RTE_COLORS] = {NULL};
/* Called from RTE API */
bool is_root = !(attr->group || (attr->transfer && priv->fdb_def_rule));
if (!dev_conf->dv_esw_en)
def_domain &= ~MLX5_MTR_DOMAIN_TRANSFER_BIT;
*domain_bitmap = def_domain;
/* Red color could only support DROP action. */
if (!actions[RTE_COLOR_RED] ||
actions[RTE_COLOR_RED]->type != RTE_FLOW_ACTION_TYPE_DROP)
return -rte_mtr_error_set(error, ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL, "Red color only supports drop action.");
/*
* Check default policy actions:
* Green / Yellow: no action, Red: drop action
* Either G or Y will trigger default policy actions to be created.
*/
if (!actions[RTE_COLOR_GREEN] ||
actions[RTE_COLOR_GREEN]->type == RTE_FLOW_ACTION_TYPE_END)
def_green = true;
if (!actions[RTE_COLOR_YELLOW] ||
actions[RTE_COLOR_YELLOW]->type == RTE_FLOW_ACTION_TYPE_END)
def_yellow = true;
if (def_green && def_yellow) {
*policy_mode = MLX5_MTR_POLICY_MODE_DEF;
return 0;
} else if (!def_green && def_yellow) {
*policy_mode = MLX5_MTR_POLICY_MODE_OG;
} else if (def_green && !def_yellow) {
*policy_mode = MLX5_MTR_POLICY_MODE_OY;
} else {
*policy_mode = MLX5_MTR_POLICY_MODE_ALL;
}
/* Set to empty string in case of NULL pointer access by user. */
flow_err.message = "";
for (i = 0; i < RTE_COLORS; i++) {
act = actions[i];
for (action_flags[i] = 0, actions_n = 0;
act && act->type != RTE_FLOW_ACTION_TYPE_END;
act++) {
if (actions_n == MLX5_DV_MAX_NUMBER_OF_ACTIONS)
return -rte_mtr_error_set(error, ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL, "too many actions");
switch (act->type) {
case RTE_FLOW_ACTION_TYPE_PORT_ID:
case RTE_FLOW_ACTION_TYPE_REPRESENTED_PORT:
if (!dev_conf->dv_esw_en)
return -rte_mtr_error_set(error,
ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL, "PORT action validate check"
" fail for ESW disable");
ret = flow_dv_validate_action_port_id(dev,
action_flags[i],
act, attr, &flow_err);
if (ret)
return -rte_mtr_error_set(error,
ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL, flow_err.message ?
flow_err.message :
"PORT action validate check fail");
++actions_n;
action_flags[i] |= MLX5_FLOW_ACTION_PORT_ID;
break;
case RTE_FLOW_ACTION_TYPE_MARK:
ret = flow_dv_validate_action_mark(dev, act,
action_flags[i],
attr, &flow_err);
if (ret < 0)
return -rte_mtr_error_set(error,
ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL, flow_err.message ?
flow_err.message :
"Mark action validate check fail");
if (dev_conf->dv_xmeta_en !=
MLX5_XMETA_MODE_LEGACY)
return -rte_mtr_error_set(error,
ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL, "Extend MARK action is "
"not supported. Please try use "
"default policy for meter.");
action_flags[i] |= MLX5_FLOW_ACTION_MARK;
++actions_n;
break;
case RTE_FLOW_ACTION_TYPE_SET_TAG:
ret = flow_dv_validate_action_set_tag(dev,
act, action_flags[i],
attr, &flow_err);
if (ret)
return -rte_mtr_error_set(error,
ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL, flow_err.message ?
flow_err.message :
"Set tag action validate check fail");
action_flags[i] |= MLX5_FLOW_ACTION_SET_TAG;
++actions_n;
break;
case RTE_FLOW_ACTION_TYPE_DROP:
ret = mlx5_flow_validate_action_drop
(action_flags[i], attr, &flow_err);
if (ret < 0)
return -rte_mtr_error_set(error,
ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL, flow_err.message ?
flow_err.message :
"Drop action validate check fail");
action_flags[i] |= MLX5_FLOW_ACTION_DROP;
++actions_n;
break;
case RTE_FLOW_ACTION_TYPE_QUEUE:
/*
* Check whether extensive
* metadata feature is engaged.
*/
if (dev_conf->dv_flow_en &&
(dev_conf->dv_xmeta_en !=
MLX5_XMETA_MODE_LEGACY) &&
mlx5_flow_ext_mreg_supported(dev))
return -rte_mtr_error_set(error,
ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL, "Queue action with meta "
"is not supported. Please try use "
"default policy for meter.");
ret = mlx5_flow_validate_action_queue(act,
action_flags[i], dev,
attr, &flow_err);
if (ret < 0)
return -rte_mtr_error_set(error,
ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL, flow_err.message ?
flow_err.message :
"Queue action validate check fail");
action_flags[i] |= MLX5_FLOW_ACTION_QUEUE;
++actions_n;
break;
case RTE_FLOW_ACTION_TYPE_RSS:
if (dev_conf->dv_flow_en &&
(dev_conf->dv_xmeta_en !=
MLX5_XMETA_MODE_LEGACY) &&
mlx5_flow_ext_mreg_supported(dev))
return -rte_mtr_error_set(error,
ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL, "RSS action with meta "
"is not supported. Please try use "
"default policy for meter.");
ret = mlx5_validate_action_rss(dev, act,
&flow_err);
if (ret < 0)
return -rte_mtr_error_set(error,
ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL, flow_err.message ?
flow_err.message :
"RSS action validate check fail");
action_flags[i] |= MLX5_FLOW_ACTION_RSS;
++actions_n;
/* Either G or Y will set the RSS. */
rss_color[i] = act->conf;
break;
case RTE_FLOW_ACTION_TYPE_JUMP:
ret = flow_dv_validate_action_jump(dev,
NULL, act, action_flags[i],
attr, true, &flow_err);
if (ret)
return -rte_mtr_error_set(error,
ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL, flow_err.message ?
flow_err.message :
"Jump action validate check fail");
++actions_n;
action_flags[i] |= MLX5_FLOW_ACTION_JUMP;
break;
case RTE_FLOW_ACTION_TYPE_METER:
mtr = act->conf;
if (next_mtr && next_mtr->mtr_id != mtr->mtr_id)
return -rte_mtr_error_set(error, ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY, NULL,
"Green and Yellow must use the same meter.");
ret = flow_dv_validate_policy_mtr_hierarchy(dev,
mtr->mtr_id,
action_flags[i],
is_rss,
&hierarchy_domain,
error);
if (ret)
return ret;
++actions_n;
action_flags[i] |=
MLX5_FLOW_ACTION_METER_WITH_TERMINATED_POLICY;
next_mtr = mtr;
break;
case RTE_FLOW_ACTION_TYPE_MODIFY_FIELD:
ret = flow_dv_validate_action_modify_field(dev,
action_flags[i], act, attr, is_root, &flow_err);
if (ret < 0)
return -rte_mtr_error_set(error,
ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL, flow_err.message ?
flow_err.message :
"Modify field action validate check fail");
++actions_n;
action_flags[i] |= MLX5_FLOW_ACTION_MODIFY_FIELD;
break;
default:
return -rte_mtr_error_set(error, ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL,
"Doesn't support optional action");
}
}
if (action_flags[i] & MLX5_FLOW_ACTION_PORT_ID) {
domain_color[i] = MLX5_MTR_DOMAIN_TRANSFER_BIT;
} else if ((action_flags[i] &
(MLX5_FLOW_ACTION_RSS | MLX5_FLOW_ACTION_QUEUE)) ||
(action_flags[i] & MLX5_FLOW_ACTION_MARK)) {
/*
* Only support MLX5_XMETA_MODE_LEGACY
* so MARK action is only in ingress domain.
*/
domain_color[i] = MLX5_MTR_DOMAIN_INGRESS_BIT;
} else {
domain_color[i] = def_domain;
if (action_flags[i] &&
!(action_flags[i] & MLX5_FLOW_FATE_ESWITCH_ACTIONS))
domain_color[i] &=
~MLX5_MTR_DOMAIN_TRANSFER_BIT;
}
if (action_flags[i] &
MLX5_FLOW_ACTION_METER_WITH_TERMINATED_POLICY)
domain_color[i] &= hierarchy_domain;
/*
* Non-termination actions only support NIC Tx domain.
* The adjustion should be skipped when there is no
* action or only END is provided. The default domains
* bit-mask is set to find the MIN intersection.
* The action flags checking should also be skipped.
*/
if ((def_green && i == RTE_COLOR_GREEN) ||
(def_yellow && i == RTE_COLOR_YELLOW))
continue;
/*
* Validate the drop action mutual exclusion
* with other actions. Drop action is mutually-exclusive
* with any other action, except for Count action.
*/
if ((action_flags[i] & MLX5_FLOW_ACTION_DROP) &&
(action_flags[i] & ~MLX5_FLOW_ACTION_DROP)) {
return -rte_mtr_error_set(error, ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL, "Drop action is mutually-exclusive "
"with any other action");
}
/* Eswitch has few restrictions on using items and actions */
if (domain_color[i] & MLX5_MTR_DOMAIN_TRANSFER_BIT) {
if (!mlx5_flow_ext_mreg_supported(dev) &&
action_flags[i] & MLX5_FLOW_ACTION_MARK)
return -rte_mtr_error_set(error, ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL, "unsupported action MARK");
if (action_flags[i] & MLX5_FLOW_ACTION_QUEUE)
return -rte_mtr_error_set(error, ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL, "unsupported action QUEUE");
if (action_flags[i] & MLX5_FLOW_ACTION_RSS)
return -rte_mtr_error_set(error, ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL, "unsupported action RSS");
if (!(action_flags[i] & MLX5_FLOW_FATE_ESWITCH_ACTIONS))
return -rte_mtr_error_set(error, ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL, "no fate action is found");
} else {
if (!(action_flags[i] & MLX5_FLOW_FATE_ACTIONS) &&
(domain_color[i] & MLX5_MTR_DOMAIN_INGRESS_BIT)) {
if ((domain_color[i] &
MLX5_MTR_DOMAIN_EGRESS_BIT))
domain_color[i] =
MLX5_MTR_DOMAIN_EGRESS_BIT;
else
return -rte_mtr_error_set(error,
ENOTSUP,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL,
"no fate action is found");
}
}
}
if (next_mtr && *policy_mode == MLX5_MTR_POLICY_MODE_ALL) {
if (!(action_flags[RTE_COLOR_GREEN] & action_flags[RTE_COLOR_YELLOW] &
MLX5_FLOW_ACTION_METER_WITH_TERMINATED_POLICY))
return -rte_mtr_error_set(error, EINVAL, RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL,
"Meter hierarchy supports meter action only.");
}
/* If both colors have RSS, the attributes should be the same. */
if (flow_dv_mtr_policy_rss_compare(rss_color[RTE_COLOR_GREEN],
rss_color[RTE_COLOR_YELLOW]))
return -rte_mtr_error_set(error, EINVAL,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL, "policy RSS attr conflict");
if (rss_color[RTE_COLOR_GREEN] || rss_color[RTE_COLOR_YELLOW])
*is_rss = true;
/* "domain_color[C]" is non-zero for each color, default is ALL. */
if (!def_green && !def_yellow &&
domain_color[RTE_COLOR_GREEN] != domain_color[RTE_COLOR_YELLOW] &&
!(action_flags[RTE_COLOR_GREEN] & MLX5_FLOW_ACTION_DROP) &&
!(action_flags[RTE_COLOR_YELLOW] & MLX5_FLOW_ACTION_DROP))
return -rte_mtr_error_set(error, EINVAL,
RTE_MTR_ERROR_TYPE_METER_POLICY,
NULL, "policy domains conflict");
/*
* At least one color policy is listed in the actions, the domains
* to be supported should be the intersection.
*/
*domain_bitmap = domain_color[RTE_COLOR_GREEN] &
domain_color[RTE_COLOR_YELLOW];
return 0;
}
static int
flow_dv_sync_domain(struct rte_eth_dev *dev, uint32_t domains, uint32_t flags)
{
struct mlx5_priv *priv = dev->data->dev_private;
int ret = 0;
if ((domains & MLX5_DOMAIN_BIT_NIC_RX) && priv->sh->rx_domain != NULL) {
ret = mlx5_os_flow_dr_sync_domain(priv->sh->rx_domain,
flags);
if (ret != 0)
return ret;
}
if ((domains & MLX5_DOMAIN_BIT_NIC_TX) && priv->sh->tx_domain != NULL) {
ret = mlx5_os_flow_dr_sync_domain(priv->sh->tx_domain, flags);
if (ret != 0)
return ret;
}
if ((domains & MLX5_DOMAIN_BIT_FDB) && priv->sh->fdb_domain != NULL) {
ret = mlx5_os_flow_dr_sync_domain(priv->sh->fdb_domain, flags);
if (ret != 0)
return ret;
}
return 0;
}
/**
* Discover the number of available flow priorities
* by trying to create a flow with the highest priority value
* for each possible number.
*
* @param[in] dev
* Ethernet device.
* @param[in] vprio
* List of possible number of available priorities.
* @param[in] vprio_n
* Size of @p vprio array.
* @return
* On success, number of available flow priorities.
* On failure, a negative errno-style code and rte_errno is set.
*/
static int
flow_dv_discover_priorities(struct rte_eth_dev *dev,
const uint16_t *vprio, int vprio_n)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_indexed_pool *pool = priv->sh->ipool[MLX5_IPOOL_MLX5_FLOW];
struct rte_flow_item_eth eth;
struct rte_flow_item item = {
.type = RTE_FLOW_ITEM_TYPE_ETH,
.spec = &eth,
.mask = &eth,
};
struct mlx5_flow_dv_matcher matcher = {
.mask = {
.size = sizeof(matcher.mask.buf),
},
};
union mlx5_flow_tbl_key tbl_key;
struct mlx5_flow flow;
void *action;
struct rte_flow_error error;
uint8_t misc_mask;
int i, err, ret = -ENOTSUP;
/*
* Prepare a flow with a catch-all pattern and a drop action.
* Use drop queue, because shared drop action may be unavailable.
*/
action = priv->drop_queue.hrxq->action;
if (action == NULL) {
DRV_LOG(ERR, "Priority discovery requires a drop action");
rte_errno = ENOTSUP;
return -rte_errno;
}
memset(&flow, 0, sizeof(flow));
flow.handle = mlx5_ipool_zmalloc(pool, &flow.handle_idx);
if (flow.handle == NULL) {
DRV_LOG(ERR, "Cannot create flow handle");
rte_errno = ENOMEM;
return -rte_errno;
}
flow.ingress = true;
flow.dv.value.size = MLX5_ST_SZ_BYTES(fte_match_param);
flow.dv.actions[0] = action;
flow.dv.actions_n = 1;
memset(&eth, 0, sizeof(eth));
flow_dv_translate_item_eth(matcher.mask.buf, &item,
/* inner */ false, /* group */ 0,
MLX5_SET_MATCHER_SW_M);
flow_dv_translate_item_eth(flow.dv.value.buf, &item,
/* inner */ false, /* group */ 0,
MLX5_SET_MATCHER_SW_V);
matcher.crc = rte_raw_cksum(matcher.mask.buf, matcher.mask.size);
for (i = 0; i < vprio_n; i++) {
/* Configure the next proposed maximum priority. */
matcher.priority = vprio[i] - 1;
memset(&tbl_key, 0, sizeof(tbl_key));
err = flow_dv_matcher_register(dev, &matcher, &tbl_key, &flow,
/* tunnel */ NULL,
/* group */ 0,
&error);
if (err != 0) {
/* This action is pure SW and must always succeed. */
DRV_LOG(ERR, "Cannot register matcher");
ret = -rte_errno;
break;
}
/* Try to apply the flow to HW. */
misc_mask = flow_dv_matcher_enable(flow.dv.value.buf);
__flow_dv_adjust_buf_size(&flow.dv.value.size, misc_mask);
err = mlx5_flow_os_create_flow
(flow.handle->dvh.matcher->matcher_object,
(void *)&flow.dv.value, flow.dv.actions_n,
flow.dv.actions, &flow.handle->drv_flow);
if (err == 0) {
claim_zero(mlx5_flow_os_destroy_flow
(flow.handle->drv_flow));
flow.handle->drv_flow = NULL;
}
claim_zero(flow_dv_matcher_release(dev, flow.handle));
if (err != 0)
break;
ret = vprio[i];
}
mlx5_ipool_free(pool, flow.handle_idx);
/* Set rte_errno if no expected priority value matched. */
if (ret < 0)
rte_errno = -ret;
return ret;
}
const struct mlx5_flow_driver_ops mlx5_flow_dv_drv_ops = {
.validate = flow_dv_validate,
.prepare = flow_dv_prepare,
.translate = flow_dv_translate,
.apply = flow_dv_apply,
.remove = flow_dv_remove,
.destroy = flow_dv_destroy,
.query = flow_dv_query,
.create_mtr_tbls = flow_dv_create_mtr_tbls,
.destroy_mtr_tbls = flow_dv_destroy_mtr_tbls,
.destroy_mtr_drop_tbls = flow_dv_destroy_mtr_drop_tbls,
.create_meter = flow_dv_mtr_alloc,
.free_meter = flow_dv_aso_mtr_release_to_pool,
.validate_mtr_acts = flow_dv_validate_mtr_policy_acts,
.create_mtr_acts = flow_dv_create_mtr_policy_acts,
.destroy_mtr_acts = flow_dv_destroy_mtr_policy_acts,
.create_policy_rules = flow_dv_create_policy_rules,
.destroy_policy_rules = flow_dv_destroy_policy_rules,
.create_def_policy = flow_dv_create_def_policy,
.destroy_def_policy = flow_dv_destroy_def_policy,
.meter_sub_policy_rss_prepare = flow_dv_meter_sub_policy_rss_prepare,
.meter_hierarchy_rule_create = flow_dv_meter_hierarchy_rule_create,
.destroy_sub_policy_with_rxq = flow_dv_destroy_sub_policy_with_rxq,
.counter_alloc = flow_dv_counter_allocate,
.counter_free = flow_dv_counter_free,
.counter_query = flow_dv_counter_query,
.get_aged_flows = flow_dv_get_aged_flows,
.action_validate = flow_dv_action_validate,
.action_create = flow_dv_action_create,
.action_destroy = flow_dv_action_destroy,
.action_update = flow_dv_action_update,
.action_query = flow_dv_action_query,
.sync_domain = flow_dv_sync_domain,
.discover_priorities = flow_dv_discover_priorities,
.item_create = flow_dv_item_create,
.item_release = flow_dv_item_release,
};
#endif /* HAVE_IBV_FLOW_DV_SUPPORT */
Reference in New Issue View Git Blame Copy Permalink