numam-dpdk/doc/guides/prog_guide/metrics_lib.rst

..  BSD LICENSE
    Copyright(c) 2017 Intel Corporation. All rights reserved.
    All rights reserved.

    Redistribution and use in source and binary forms, with or without
    modification, are permitted provided that the following conditions
    are met:

    * Redistributions of source code must retain the above copyright
    notice, this list of conditions and the following disclaimer.
    * Redistributions in binary form must reproduce the above copyright
    notice, this list of conditions and the following disclaimer in
    the documentation and/or other materials provided with the
    distribution.
    * Neither the name of Intel Corporation nor the names of its
    contributors may be used to endorse or promote products derived
    from this software without specific prior written permission.

    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
    "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
    A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
    OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
    SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
    LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
    DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
    THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
    OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

.. _Metrics_Library:

Metrics Library
===============

The Metrics library implements a mechanism by which *producers* can
publish numeric information for later querying by *consumers*. In
practice producers will typically be other libraries or primary
processes, whereas consumers will typically be applications.

Metrics themselves are statistics that are not generated by PMDs. Metric
information is populated using a push model, where producers update the
values contained within the metric library by calling an update function
on the relevant metrics. Consumers receive metric information by querying
the central metric data, which is held in shared memory.

For each metric, a separate value is maintained for each port id, and
when publishing metric values the producers need to specify which port is
being updated. In addition there is a special id ``RTE_METRICS_GLOBAL``
that is intended for global statistics that are not associated with any
individual device. Since the metrics library is self-contained, the only
restriction on port numbers is that they are less than ``RTE_MAX_ETHPORTS``
- there is no requirement for the ports to actually exist.

Initialising the library
------------------------

Before the library can be used, it has to be initialized by calling
``rte_metrics_init()`` which sets up the metric store in shared memory.
This is where producers will publish metric information to, and where
consumers will query it from.

.. code-block:: c

    rte_metrics_init(rte_socket_id());

This function **must** be called from a primary process, but otherwise
producers and consumers can be in either primary or secondary processes.

Registering metrics
-------------------

Metrics must first be *registered*, which is the way producers declare
the names of the metrics they will be publishing. Registration can either
be done individually, or a set of metrics can be registered as a group.
Individual registration is done using ``rte_metrics_reg_name()``:

.. code-block:: c

    id_1 = rte_metrics_reg_name("mean_bits_in");
    id_2 = rte_metrics_reg_name("mean_bits_out");
    id_3 = rte_metrics_reg_name("peak_bits_in");
    id_4 = rte_metrics_reg_name("peak_bits_out");

or alternatively, a set of metrics can be registered together using
``rte_metrics_reg_names()``:

.. code-block:: c

    const char * const names[] = {
        "mean_bits_in", "mean_bits_out",
        "peak_bits_in", "peak_bits_out",
    };
    id_set = rte_metrics_reg_names(&names[0], 4);

If the return value is negative, it means registration failed. Otherwise
the return value is the *key* for the metric, which is used when updating
values. A table mapping together these key values and the metrics' names
can be obtained using ``rte_metrics_get_names()``.

Updating metric values
----------------------

Once registered, producers can update the metric for a given port using
the ``rte_metrics_update_value()`` function. This uses the metric key
that is returned when registering the metric, and can also be looked up
using ``rte_metrics_get_names()``.

.. code-block:: c

    rte_metrics_update_value(port_id, id_1, values[0]);
    rte_metrics_update_value(port_id, id_2, values[1]);
    rte_metrics_update_value(port_id, id_3, values[2]);
    rte_metrics_update_value(port_id, id_4, values[3]);

if metrics were registered as a single set, they can either be updated
individually using ``rte_metrics_update_value()``, or updated together
using the ``rte_metrics_update_values()`` function:

.. code-block:: c

    rte_metrics_update_value(port_id, id_set, values[0]);
    rte_metrics_update_value(port_id, id_set + 1, values[1]);
    rte_metrics_update_value(port_id, id_set + 2, values[2]);
    rte_metrics_update_value(port_id, id_set + 3, values[3]);

    rte_metrics_update_values(port_id, id_set, values, 4);

Note that ``rte_metrics_update_values()`` cannot be used to update
metric values from *multiple* *sets*, as there is no guarantee two
sets registered one after the other have contiguous id values.

Querying metrics
----------------

Consumers can obtain metric values by querying the metrics library using
the ``rte_metrics_get_values()`` function that return an array of
``struct rte_metric_value``. Each entry within this array contains a metric
value and its associated key. A key-name mapping can be obtained using the
``rte_metrics_get_names()`` function that returns an array of
``struct rte_metric_name`` that is indexed by the key. The following will
print out all metrics for a given port:

.. code-block:: c

    void print_metrics() {
        struct rte_metric_name *names;
        int len;

        len = rte_metrics_get_names(NULL, 0);
        if (len < 0) {
            printf("Cannot get metrics count\n");
            return;
        }
        if (len == 0) {
            printf("No metrics to display (none have been registered)\n");
            return;
        }
        metrics = malloc(sizeof(struct rte_metric_value) * len);
        names =  malloc(sizeof(struct rte_metric_name) * len);
        if (metrics == NULL || names == NULL) {
            printf("Cannot allocate memory\n");
            free(metrics);
            free(names);
            return;
        }
        ret = rte_metrics_get_values(port_id, metrics, len);
        if (ret < 0 || ret > len) {
            printf("Cannot get metrics values\n");
            free(metrics);
            free(names);
            return;
        }
        printf("Metrics for port %i:\n", port_id);
        for (i = 0; i < len; i++)
            printf("  %s: %"PRIu64"\n",
                names[metrics[i].key].name, metrics[i].value);
        free(metrics);
        free(names);
    }


Bit-rate statistics library
---------------------------

The bit-rate library calculates the exponentially-weighted moving
average and peak bit-rates for each active port (i.e. network device).
These statistics are reported via the metrics library using the
following names:

    - ``mean_bits_in``: Average inbound bit-rate
    - ``mean_bits_out``:  Average outbound bit-rate
    - ``ewma_bits_in``: Average inbound bit-rate (EWMA smoothed)
    - ``ewma_bits_out``:  Average outbound bit-rate (EWMA smoothed)
    - ``peak_bits_in``:  Peak inbound bit-rate
    - ``peak_bits_out``:  Peak outbound bit-rate

Once initialised and clocked at the appropriate frequency, these
statistics can be obtained by querying the metrics library.

Initialization
~~~~~~~~~~~~~~

Before the library can be used, it has to be initialised by calling
``rte_stats_bitrate_create()``, which will return a bit-rate
calculation object. Since the bit-rate library uses the metrics library
to report the calculated statistics, the bit-rate library then needs to
register the calculated statistics with the metrics library. This is
done using the helper function ``rte_stats_bitrate_reg()``.

.. code-block:: c

    struct rte_stats_bitrates *bitrate_data;

    bitrate_data = rte_stats_bitrate_create();
    if (bitrate_data == NULL)
        rte_exit(EXIT_FAILURE, "Could not allocate bit-rate data.\n");
    rte_stats_bitrate_reg(bitrate_data);

Controlling the sampling rate
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Since the library works by periodic sampling but does not use an
internal thread, the application has to periodically call
``rte_stats_bitrate_calc()``. The frequency at which this function
is called should be the intended sampling rate required for the
calculated statistics. For instance if per-second statistics are
desired, this function should be called once a second.

.. code-block:: c

    tics_datum = rte_rdtsc();
    tics_per_1sec = rte_get_timer_hz();

    while( 1 ) {
        /* ... */
        tics_current = rte_rdtsc();
	if (tics_current - tics_datum >= tics_per_1sec) {
	    /* Periodic bitrate calculation */
	    for (idx_port = 0; idx_port < cnt_ports; idx_port++)
	            rte_stats_bitrate_calc(bitrate_data, idx_port);
		tics_datum = tics_current;
	    }
        /* ... */
    }


Latency statistics library
--------------------------

The latency statistics library calculates the latency of packet
processing by a DPDK application, reporting the minimum, average,
and maximum nano-seconds that packet processing takes, as well as
the jitter in processing delay. These statistics are then reported
via the metrics library using the following names:

    - ``min_latency_ns``: Minimum processing latency (nano-seconds)
    - ``avg_latency_ns``:  Average  processing latency (nano-seconds)
    - ``mac_latency_ns``:  Maximum  processing latency (nano-seconds)
    - ``jitter_ns``: Variance in processing latency (nano-seconds)

Once initialised and clocked at the appropriate frequency, these
statistics can be obtained by querying the metrics library.

Initialization
~~~~~~~~~~~~~~

Before the library can be used, it has to be initialised by calling
``rte_latencystats_init()``.

.. code-block:: c

    lcoreid_t latencystats_lcore_id = -1;

    int ret = rte_latencystats_init(1, NULL);
    if (ret)
        rte_exit(EXIT_FAILURE, "Could not allocate latency data.\n");


Triggering statistic updates
~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The ``rte_latencystats_update()`` function needs to be called
periodically so that latency statistics can be updated.

.. code-block:: c

    if (latencystats_lcore_id == rte_lcore_id())
        rte_latencystats_update();

Library shutdown
~~~~~~~~~~~~~~~~

When finished, ``rte_latencystats_uninit()`` needs to be called to
de-initialise the latency library.

.. code-block:: c

    rte_latencystats_uninit();