2ed2fe5f0a
Offload the following rte_flow actions by inserting accordingly E-Switch rules via TC Flower driver - RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC - RTE_FLOW_ACTION_TYPE_SET_IPV4_DST - RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC - RTE_FLOW_ACTION_TYPE_SET_IPV6_DST - RTE_FLOW_ACTION_TYPE_SET_TP_SRC - RTE_FLOW_ACTION_TYPE_SET_TP_DST The example testpmd command is: flow create 0 transfer ingress pattern eth / ipv4 / udp dst is 7000 / end actions set_ipv4_src ipv4_addr 172.168.0.1 / set_ipv4_dst ipv4_addr 172.168.10.1 / set_tp_dst port 9000 / set_tp_src port 700 / port_id id 1 / end Signed-off-by: Xiaoyu Min <jackmin@mellanox.com> Acked-by: Yongseok Koh <yskoh@mellanox.com>
2115 lines
60 KiB
C
2115 lines
60 KiB
C
/* SPDX-License-Identifier: BSD-3-Clause
|
|
* Copyright 2018 6WIND S.A.
|
|
* Copyright 2018 Mellanox Technologies, Ltd
|
|
*/
|
|
|
|
#include <assert.h>
|
|
#include <errno.h>
|
|
#include <libmnl/libmnl.h>
|
|
#include <linux/if_ether.h>
|
|
#include <linux/netlink.h>
|
|
#include <linux/pkt_cls.h>
|
|
#include <linux/pkt_sched.h>
|
|
#include <linux/rtnetlink.h>
|
|
#include <linux/tc_act/tc_gact.h>
|
|
#include <linux/tc_act/tc_mirred.h>
|
|
#include <netinet/in.h>
|
|
#include <stdalign.h>
|
|
#include <stdbool.h>
|
|
#include <stddef.h>
|
|
#include <stdint.h>
|
|
#include <stdlib.h>
|
|
#include <sys/socket.h>
|
|
|
|
#include <rte_byteorder.h>
|
|
#include <rte_errno.h>
|
|
#include <rte_ether.h>
|
|
#include <rte_flow.h>
|
|
#include <rte_malloc.h>
|
|
|
|
#include "mlx5.h"
|
|
#include "mlx5_flow.h"
|
|
#include "mlx5_autoconf.h"
|
|
|
|
#ifdef HAVE_TC_ACT_VLAN
|
|
|
|
#include <linux/tc_act/tc_vlan.h>
|
|
|
|
#else /* HAVE_TC_ACT_VLAN */
|
|
|
|
#define TCA_VLAN_ACT_POP 1
|
|
#define TCA_VLAN_ACT_PUSH 2
|
|
#define TCA_VLAN_ACT_MODIFY 3
|
|
#define TCA_VLAN_PARMS 2
|
|
#define TCA_VLAN_PUSH_VLAN_ID 3
|
|
#define TCA_VLAN_PUSH_VLAN_PROTOCOL 4
|
|
#define TCA_VLAN_PAD 5
|
|
#define TCA_VLAN_PUSH_VLAN_PRIORITY 6
|
|
|
|
struct tc_vlan {
|
|
tc_gen;
|
|
int v_action;
|
|
};
|
|
|
|
#endif /* HAVE_TC_ACT_VLAN */
|
|
|
|
#ifdef HAVE_TC_ACT_PEDIT
|
|
|
|
#include <linux/tc_act/tc_pedit.h>
|
|
|
|
#else /* HAVE_TC_ACT_VLAN */
|
|
|
|
enum {
|
|
TCA_PEDIT_UNSPEC,
|
|
TCA_PEDIT_TM,
|
|
TCA_PEDIT_PARMS,
|
|
TCA_PEDIT_PAD,
|
|
TCA_PEDIT_PARMS_EX,
|
|
TCA_PEDIT_KEYS_EX,
|
|
TCA_PEDIT_KEY_EX,
|
|
__TCA_PEDIT_MAX
|
|
};
|
|
|
|
enum {
|
|
TCA_PEDIT_KEY_EX_HTYPE = 1,
|
|
TCA_PEDIT_KEY_EX_CMD = 2,
|
|
__TCA_PEDIT_KEY_EX_MAX
|
|
};
|
|
|
|
enum pedit_header_type {
|
|
TCA_PEDIT_KEY_EX_HDR_TYPE_NETWORK = 0,
|
|
TCA_PEDIT_KEY_EX_HDR_TYPE_ETH = 1,
|
|
TCA_PEDIT_KEY_EX_HDR_TYPE_IP4 = 2,
|
|
TCA_PEDIT_KEY_EX_HDR_TYPE_IP6 = 3,
|
|
TCA_PEDIT_KEY_EX_HDR_TYPE_TCP = 4,
|
|
TCA_PEDIT_KEY_EX_HDR_TYPE_UDP = 5,
|
|
__PEDIT_HDR_TYPE_MAX,
|
|
};
|
|
|
|
enum pedit_cmd {
|
|
TCA_PEDIT_KEY_EX_CMD_SET = 0,
|
|
TCA_PEDIT_KEY_EX_CMD_ADD = 1,
|
|
__PEDIT_CMD_MAX,
|
|
};
|
|
|
|
struct tc_pedit_key {
|
|
__u32 mask; /* AND */
|
|
__u32 val; /*XOR */
|
|
__u32 off; /*offset */
|
|
__u32 at;
|
|
__u32 offmask;
|
|
__u32 shift;
|
|
};
|
|
|
|
struct tc_pedit_sel {
|
|
tc_gen;
|
|
unsigned char nkeys;
|
|
unsigned char flags;
|
|
struct tc_pedit_key keys[0];
|
|
};
|
|
|
|
#endif /* HAVE_TC_ACT_VLAN */
|
|
|
|
/* Normally found in linux/netlink.h. */
|
|
#ifndef NETLINK_CAP_ACK
|
|
#define NETLINK_CAP_ACK 10
|
|
#endif
|
|
|
|
/* Normally found in linux/pkt_sched.h. */
|
|
#ifndef TC_H_MIN_INGRESS
|
|
#define TC_H_MIN_INGRESS 0xfff2u
|
|
#endif
|
|
|
|
/* Normally found in linux/pkt_cls.h. */
|
|
#ifndef TCA_CLS_FLAGS_SKIP_SW
|
|
#define TCA_CLS_FLAGS_SKIP_SW (1 << 1)
|
|
#endif
|
|
#ifndef HAVE_TCA_FLOWER_ACT
|
|
#define TCA_FLOWER_ACT 3
|
|
#endif
|
|
#ifndef HAVE_TCA_FLOWER_FLAGS
|
|
#define TCA_FLOWER_FLAGS 22
|
|
#endif
|
|
#ifndef HAVE_TCA_FLOWER_KEY_ETH_TYPE
|
|
#define TCA_FLOWER_KEY_ETH_TYPE 8
|
|
#endif
|
|
#ifndef HAVE_TCA_FLOWER_KEY_ETH_DST
|
|
#define TCA_FLOWER_KEY_ETH_DST 4
|
|
#endif
|
|
#ifndef HAVE_TCA_FLOWER_KEY_ETH_DST_MASK
|
|
#define TCA_FLOWER_KEY_ETH_DST_MASK 5
|
|
#endif
|
|
#ifndef HAVE_TCA_FLOWER_KEY_ETH_SRC
|
|
#define TCA_FLOWER_KEY_ETH_SRC 6
|
|
#endif
|
|
#ifndef HAVE_TCA_FLOWER_KEY_ETH_SRC_MASK
|
|
#define TCA_FLOWER_KEY_ETH_SRC_MASK 7
|
|
#endif
|
|
#ifndef HAVE_TCA_FLOWER_KEY_IP_PROTO
|
|
#define TCA_FLOWER_KEY_IP_PROTO 9
|
|
#endif
|
|
#ifndef HAVE_TCA_FLOWER_KEY_IPV4_SRC
|
|
#define TCA_FLOWER_KEY_IPV4_SRC 10
|
|
#endif
|
|
#ifndef HAVE_TCA_FLOWER_KEY_IPV4_SRC_MASK
|
|
#define TCA_FLOWER_KEY_IPV4_SRC_MASK 11
|
|
#endif
|
|
#ifndef HAVE_TCA_FLOWER_KEY_IPV4_DST
|
|
#define TCA_FLOWER_KEY_IPV4_DST 12
|
|
#endif
|
|
#ifndef HAVE_TCA_FLOWER_KEY_IPV4_DST_MASK
|
|
#define TCA_FLOWER_KEY_IPV4_DST_MASK 13
|
|
#endif
|
|
#ifndef HAVE_TCA_FLOWER_KEY_IPV6_SRC
|
|
#define TCA_FLOWER_KEY_IPV6_SRC 14
|
|
#endif
|
|
#ifndef HAVE_TCA_FLOWER_KEY_IPV6_SRC_MASK
|
|
#define TCA_FLOWER_KEY_IPV6_SRC_MASK 15
|
|
#endif
|
|
#ifndef HAVE_TCA_FLOWER_KEY_IPV6_DST
|
|
#define TCA_FLOWER_KEY_IPV6_DST 16
|
|
#endif
|
|
#ifndef HAVE_TCA_FLOWER_KEY_IPV6_DST_MASK
|
|
#define TCA_FLOWER_KEY_IPV6_DST_MASK 17
|
|
#endif
|
|
#ifndef HAVE_TCA_FLOWER_KEY_TCP_SRC
|
|
#define TCA_FLOWER_KEY_TCP_SRC 18
|
|
#endif
|
|
#ifndef HAVE_TCA_FLOWER_KEY_TCP_SRC_MASK
|
|
#define TCA_FLOWER_KEY_TCP_SRC_MASK 35
|
|
#endif
|
|
#ifndef HAVE_TCA_FLOWER_KEY_TCP_DST
|
|
#define TCA_FLOWER_KEY_TCP_DST 19
|
|
#endif
|
|
#ifndef HAVE_TCA_FLOWER_KEY_TCP_DST_MASK
|
|
#define TCA_FLOWER_KEY_TCP_DST_MASK 36
|
|
#endif
|
|
#ifndef HAVE_TCA_FLOWER_KEY_UDP_SRC
|
|
#define TCA_FLOWER_KEY_UDP_SRC 20
|
|
#endif
|
|
#ifndef HAVE_TCA_FLOWER_KEY_UDP_SRC_MASK
|
|
#define TCA_FLOWER_KEY_UDP_SRC_MASK 37
|
|
#endif
|
|
#ifndef HAVE_TCA_FLOWER_KEY_UDP_DST
|
|
#define TCA_FLOWER_KEY_UDP_DST 21
|
|
#endif
|
|
#ifndef HAVE_TCA_FLOWER_KEY_UDP_DST_MASK
|
|
#define TCA_FLOWER_KEY_UDP_DST_MASK 38
|
|
#endif
|
|
#ifndef HAVE_TCA_FLOWER_KEY_VLAN_ID
|
|
#define TCA_FLOWER_KEY_VLAN_ID 23
|
|
#endif
|
|
#ifndef HAVE_TCA_FLOWER_KEY_VLAN_PRIO
|
|
#define TCA_FLOWER_KEY_VLAN_PRIO 24
|
|
#endif
|
|
#ifndef HAVE_TCA_FLOWER_KEY_VLAN_ETH_TYPE
|
|
#define TCA_FLOWER_KEY_VLAN_ETH_TYPE 25
|
|
#endif
|
|
#ifndef HAVE_TCA_FLOWER_KEY_TCP_FLAGS
|
|
#define TCA_FLOWER_KEY_TCP_FLAGS 71
|
|
#endif
|
|
#ifndef HAVE_TCA_FLOWER_KEY_TCP_FLAGS_MASK
|
|
#define TCA_FLOWER_KEY_TCP_FLAGS_MASK 72
|
|
#endif
|
|
|
|
#ifndef IPV6_ADDR_LEN
|
|
#define IPV6_ADDR_LEN 16
|
|
#endif
|
|
|
|
#ifndef IPV4_ADDR_LEN
|
|
#define IPV4_ADDR_LEN 4
|
|
#endif
|
|
|
|
#ifndef TP_PORT_LEN
|
|
#define TP_PORT_LEN 2 /* Transport Port (UDP/TCP) Length */
|
|
#endif
|
|
|
|
/** Empty masks for known item types. */
|
|
static const union {
|
|
struct rte_flow_item_port_id port_id;
|
|
struct rte_flow_item_eth eth;
|
|
struct rte_flow_item_vlan vlan;
|
|
struct rte_flow_item_ipv4 ipv4;
|
|
struct rte_flow_item_ipv6 ipv6;
|
|
struct rte_flow_item_tcp tcp;
|
|
struct rte_flow_item_udp udp;
|
|
} flow_tcf_mask_empty;
|
|
|
|
/** Supported masks for known item types. */
|
|
static const struct {
|
|
struct rte_flow_item_port_id port_id;
|
|
struct rte_flow_item_eth eth;
|
|
struct rte_flow_item_vlan vlan;
|
|
struct rte_flow_item_ipv4 ipv4;
|
|
struct rte_flow_item_ipv6 ipv6;
|
|
struct rte_flow_item_tcp tcp;
|
|
struct rte_flow_item_udp udp;
|
|
} flow_tcf_mask_supported = {
|
|
.port_id = {
|
|
.id = 0xffffffff,
|
|
},
|
|
.eth = {
|
|
.type = RTE_BE16(0xffff),
|
|
.dst.addr_bytes = "\xff\xff\xff\xff\xff\xff",
|
|
.src.addr_bytes = "\xff\xff\xff\xff\xff\xff",
|
|
},
|
|
.vlan = {
|
|
/* PCP and VID only, no DEI. */
|
|
.tci = RTE_BE16(0xefff),
|
|
.inner_type = RTE_BE16(0xffff),
|
|
},
|
|
.ipv4.hdr = {
|
|
.next_proto_id = 0xff,
|
|
.src_addr = RTE_BE32(0xffffffff),
|
|
.dst_addr = RTE_BE32(0xffffffff),
|
|
},
|
|
.ipv6.hdr = {
|
|
.proto = 0xff,
|
|
.src_addr =
|
|
"\xff\xff\xff\xff\xff\xff\xff\xff"
|
|
"\xff\xff\xff\xff\xff\xff\xff\xff",
|
|
.dst_addr =
|
|
"\xff\xff\xff\xff\xff\xff\xff\xff"
|
|
"\xff\xff\xff\xff\xff\xff\xff\xff",
|
|
},
|
|
.tcp.hdr = {
|
|
.src_port = RTE_BE16(0xffff),
|
|
.dst_port = RTE_BE16(0xffff),
|
|
.tcp_flags = 0xff,
|
|
},
|
|
.udp.hdr = {
|
|
.src_port = RTE_BE16(0xffff),
|
|
.dst_port = RTE_BE16(0xffff),
|
|
},
|
|
};
|
|
|
|
#define SZ_NLATTR_HDR MNL_ALIGN(sizeof(struct nlattr))
|
|
#define SZ_NLATTR_NEST SZ_NLATTR_HDR
|
|
#define SZ_NLATTR_DATA_OF(len) MNL_ALIGN(SZ_NLATTR_HDR + (len))
|
|
#define SZ_NLATTR_TYPE_OF(typ) SZ_NLATTR_DATA_OF(sizeof(typ))
|
|
#define SZ_NLATTR_STRZ_OF(str) SZ_NLATTR_DATA_OF(strlen(str) + 1)
|
|
|
|
#define PTOI_TABLE_SZ_MAX(dev) (mlx5_dev_to_port_id((dev)->device, NULL, 0) + 2)
|
|
|
|
/** DPDK port to network interface index (ifindex) conversion. */
|
|
struct flow_tcf_ptoi {
|
|
uint16_t port_id; /**< DPDK port ID. */
|
|
unsigned int ifindex; /**< Network interface index. */
|
|
};
|
|
|
|
#define MLX5_TCF_FATE_ACTIONS (MLX5_FLOW_ACTION_DROP | MLX5_FLOW_ACTION_PORT_ID)
|
|
#define MLX5_TCF_VLAN_ACTIONS \
|
|
(MLX5_FLOW_ACTION_OF_POP_VLAN | MLX5_FLOW_ACTION_OF_PUSH_VLAN | \
|
|
MLX5_FLOW_ACTION_OF_SET_VLAN_VID | MLX5_FLOW_ACTION_OF_SET_VLAN_PCP)
|
|
|
|
#define MLX5_TCF_PEDIT_ACTIONS \
|
|
(MLX5_FLOW_ACTION_SET_IPV4_SRC | MLX5_FLOW_ACTION_SET_IPV4_DST | \
|
|
MLX5_FLOW_ACTION_SET_IPV6_SRC | MLX5_FLOW_ACTION_SET_IPV6_DST | \
|
|
MLX5_FLOW_ACTION_SET_TP_SRC | MLX5_FLOW_ACTION_SET_TP_DST)
|
|
|
|
#define MLX5_TCF_CONFIG_ACTIONS \
|
|
(MLX5_FLOW_ACTION_PORT_ID | MLX5_FLOW_ACTION_OF_PUSH_VLAN | \
|
|
MLX5_FLOW_ACTION_OF_SET_VLAN_VID | MLX5_FLOW_ACTION_OF_SET_VLAN_PCP | \
|
|
MLX5_TCF_PEDIT_ACTIONS)
|
|
|
|
#define MAX_PEDIT_KEYS 128
|
|
#define SZ_PEDIT_KEY_VAL 4
|
|
|
|
#define NUM_OF_PEDIT_KEYS(sz) \
|
|
(((sz) / SZ_PEDIT_KEY_VAL) + (((sz) % SZ_PEDIT_KEY_VAL) ? 1 : 0))
|
|
|
|
struct pedit_key_ex {
|
|
enum pedit_header_type htype;
|
|
enum pedit_cmd cmd;
|
|
};
|
|
|
|
struct pedit_parser {
|
|
struct tc_pedit_sel sel;
|
|
struct tc_pedit_key keys[MAX_PEDIT_KEYS];
|
|
struct pedit_key_ex keys_ex[MAX_PEDIT_KEYS];
|
|
};
|
|
|
|
|
|
/**
|
|
* Set pedit key of transport (TCP/UDP) port value
|
|
*
|
|
* @param[in] actions
|
|
* pointer to action specification
|
|
* @param[in,out] p_parser
|
|
* pointer to pedit_parser
|
|
* @param[in] item_flags
|
|
* flags of all items presented
|
|
*/
|
|
static void
|
|
flow_tcf_pedit_key_set_tp_port(const struct rte_flow_action *actions,
|
|
struct pedit_parser *p_parser,
|
|
uint64_t item_flags)
|
|
{
|
|
int idx = p_parser->sel.nkeys;
|
|
|
|
if (item_flags & MLX5_FLOW_LAYER_OUTER_L4_UDP)
|
|
p_parser->keys_ex[idx].htype = TCA_PEDIT_KEY_EX_HDR_TYPE_UDP;
|
|
if (item_flags & MLX5_FLOW_LAYER_OUTER_L4_TCP)
|
|
p_parser->keys_ex[idx].htype = TCA_PEDIT_KEY_EX_HDR_TYPE_TCP;
|
|
p_parser->keys_ex[idx].cmd = TCA_PEDIT_KEY_EX_CMD_SET;
|
|
/* offset of src/dst port is same for TCP and UDP */
|
|
p_parser->keys[idx].off =
|
|
actions->type == RTE_FLOW_ACTION_TYPE_SET_TP_SRC ?
|
|
offsetof(struct tcp_hdr, src_port) :
|
|
offsetof(struct tcp_hdr, dst_port);
|
|
p_parser->keys[idx].mask = 0xFFFF0000;
|
|
p_parser->keys[idx].val =
|
|
(__u32)((const struct rte_flow_action_set_tp *)
|
|
actions->conf)->port;
|
|
p_parser->sel.nkeys = (++idx);
|
|
}
|
|
|
|
/**
|
|
* Set pedit key of ipv6 address
|
|
*
|
|
* @param[in] actions
|
|
* pointer to action specification
|
|
* @param[in,out] p_parser
|
|
* pointer to pedit_parser
|
|
*/
|
|
static void
|
|
flow_tcf_pedit_key_set_ipv6_addr(const struct rte_flow_action *actions,
|
|
struct pedit_parser *p_parser)
|
|
{
|
|
int idx = p_parser->sel.nkeys;
|
|
int keys = NUM_OF_PEDIT_KEYS(IPV6_ADDR_LEN);
|
|
int off_base =
|
|
actions->type == RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC ?
|
|
offsetof(struct ipv6_hdr, src_addr) :
|
|
offsetof(struct ipv6_hdr, dst_addr);
|
|
const struct rte_flow_action_set_ipv6 *conf =
|
|
(const struct rte_flow_action_set_ipv6 *)actions->conf;
|
|
|
|
for (int i = 0; i < keys; i++, idx++) {
|
|
p_parser->keys_ex[idx].htype = TCA_PEDIT_KEY_EX_HDR_TYPE_IP6;
|
|
p_parser->keys_ex[idx].cmd = TCA_PEDIT_KEY_EX_CMD_SET;
|
|
p_parser->keys[idx].off = off_base + i * SZ_PEDIT_KEY_VAL;
|
|
p_parser->keys[idx].mask = ~UINT32_MAX;
|
|
memcpy(&p_parser->keys[idx].val,
|
|
conf->ipv6_addr + i * SZ_PEDIT_KEY_VAL,
|
|
SZ_PEDIT_KEY_VAL);
|
|
}
|
|
p_parser->sel.nkeys += keys;
|
|
}
|
|
|
|
/**
|
|
* Set pedit key of ipv4 address
|
|
*
|
|
* @param[in] actions
|
|
* pointer to action specification
|
|
* @param[in,out] p_parser
|
|
* pointer to pedit_parser
|
|
*/
|
|
static void
|
|
flow_tcf_pedit_key_set_ipv4_addr(const struct rte_flow_action *actions,
|
|
struct pedit_parser *p_parser)
|
|
{
|
|
int idx = p_parser->sel.nkeys;
|
|
|
|
p_parser->keys_ex[idx].htype = TCA_PEDIT_KEY_EX_HDR_TYPE_IP4;
|
|
p_parser->keys_ex[idx].cmd = TCA_PEDIT_KEY_EX_CMD_SET;
|
|
p_parser->keys[idx].off =
|
|
actions->type == RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC ?
|
|
offsetof(struct ipv4_hdr, src_addr) :
|
|
offsetof(struct ipv4_hdr, dst_addr);
|
|
p_parser->keys[idx].mask = ~UINT32_MAX;
|
|
p_parser->keys[idx].val =
|
|
((const struct rte_flow_action_set_ipv4 *)
|
|
actions->conf)->ipv4_addr;
|
|
p_parser->sel.nkeys = (++idx);
|
|
}
|
|
|
|
/**
|
|
* Create the pedit's na attribute in netlink message
|
|
* on pre-allocate message buffer
|
|
*
|
|
* @param[in,out] nl
|
|
* pointer to pre-allocated netlink message buffer
|
|
* @param[in,out] actions
|
|
* pointer to pointer of actions specification.
|
|
* @param[in,out] action_flags
|
|
* pointer to actions flags
|
|
* @param[in] item_flags
|
|
* flags of all item presented
|
|
*/
|
|
static void
|
|
flow_tcf_create_pedit_mnl_msg(struct nlmsghdr *nl,
|
|
const struct rte_flow_action **actions,
|
|
uint64_t item_flags)
|
|
{
|
|
struct pedit_parser p_parser;
|
|
struct nlattr *na_act_options;
|
|
struct nlattr *na_pedit_keys;
|
|
|
|
memset(&p_parser, 0, sizeof(p_parser));
|
|
mnl_attr_put_strz(nl, TCA_ACT_KIND, "pedit");
|
|
na_act_options = mnl_attr_nest_start(nl, TCA_ACT_OPTIONS);
|
|
/* all modify header actions should be in one tc-pedit action */
|
|
for (; (*actions)->type != RTE_FLOW_ACTION_TYPE_END; (*actions)++) {
|
|
switch ((*actions)->type) {
|
|
case RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC:
|
|
case RTE_FLOW_ACTION_TYPE_SET_IPV4_DST:
|
|
flow_tcf_pedit_key_set_ipv4_addr(*actions, &p_parser);
|
|
break;
|
|
case RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC:
|
|
case RTE_FLOW_ACTION_TYPE_SET_IPV6_DST:
|
|
flow_tcf_pedit_key_set_ipv6_addr(*actions, &p_parser);
|
|
break;
|
|
case RTE_FLOW_ACTION_TYPE_SET_TP_SRC:
|
|
case RTE_FLOW_ACTION_TYPE_SET_TP_DST:
|
|
flow_tcf_pedit_key_set_tp_port(*actions,
|
|
&p_parser, item_flags);
|
|
break;
|
|
default:
|
|
goto pedit_mnl_msg_done;
|
|
}
|
|
}
|
|
pedit_mnl_msg_done:
|
|
p_parser.sel.action = TC_ACT_PIPE;
|
|
mnl_attr_put(nl, TCA_PEDIT_PARMS_EX,
|
|
sizeof(p_parser.sel) +
|
|
p_parser.sel.nkeys * sizeof(struct tc_pedit_key),
|
|
&p_parser);
|
|
na_pedit_keys =
|
|
mnl_attr_nest_start(nl, TCA_PEDIT_KEYS_EX | NLA_F_NESTED);
|
|
for (int i = 0; i < p_parser.sel.nkeys; i++) {
|
|
struct nlattr *na_pedit_key =
|
|
mnl_attr_nest_start(nl,
|
|
TCA_PEDIT_KEY_EX | NLA_F_NESTED);
|
|
mnl_attr_put_u16(nl, TCA_PEDIT_KEY_EX_HTYPE,
|
|
p_parser.keys_ex[i].htype);
|
|
mnl_attr_put_u16(nl, TCA_PEDIT_KEY_EX_CMD,
|
|
p_parser.keys_ex[i].cmd);
|
|
mnl_attr_nest_end(nl, na_pedit_key);
|
|
}
|
|
mnl_attr_nest_end(nl, na_pedit_keys);
|
|
mnl_attr_nest_end(nl, na_act_options);
|
|
(*actions)--;
|
|
}
|
|
|
|
/**
|
|
* Calculate max memory size of one TC-pedit actions.
|
|
* One TC-pedit action can contain set of keys each defining
|
|
* a rewrite element (rte_flow action)
|
|
*
|
|
* @param[in,out] actions
|
|
* actions specification.
|
|
* @param[in,out] action_flags
|
|
* actions flags
|
|
* @param[in,out] size
|
|
* accumulated size
|
|
* @return
|
|
* Max memory size of one TC-pedit action
|
|
*/
|
|
static int
|
|
flow_tcf_get_pedit_actions_size(const struct rte_flow_action **actions,
|
|
uint64_t *action_flags)
|
|
{
|
|
int pedit_size = 0;
|
|
int keys = 0;
|
|
uint64_t flags = 0;
|
|
|
|
pedit_size += SZ_NLATTR_NEST + /* na_act_index. */
|
|
SZ_NLATTR_STRZ_OF("pedit") +
|
|
SZ_NLATTR_NEST; /* TCA_ACT_OPTIONS. */
|
|
for (; (*actions)->type != RTE_FLOW_ACTION_TYPE_END; (*actions)++) {
|
|
switch ((*actions)->type) {
|
|
case RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC:
|
|
keys += NUM_OF_PEDIT_KEYS(IPV4_ADDR_LEN);
|
|
flags |= MLX5_FLOW_ACTION_SET_IPV4_SRC;
|
|
break;
|
|
case RTE_FLOW_ACTION_TYPE_SET_IPV4_DST:
|
|
keys += NUM_OF_PEDIT_KEYS(IPV4_ADDR_LEN);
|
|
flags |= MLX5_FLOW_ACTION_SET_IPV4_DST;
|
|
break;
|
|
case RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC:
|
|
keys += NUM_OF_PEDIT_KEYS(IPV6_ADDR_LEN);
|
|
flags |= MLX5_FLOW_ACTION_SET_IPV6_SRC;
|
|
break;
|
|
case RTE_FLOW_ACTION_TYPE_SET_IPV6_DST:
|
|
keys += NUM_OF_PEDIT_KEYS(IPV6_ADDR_LEN);
|
|
flags |= MLX5_FLOW_ACTION_SET_IPV6_DST;
|
|
break;
|
|
case RTE_FLOW_ACTION_TYPE_SET_TP_SRC:
|
|
/* TCP is as same as UDP */
|
|
keys += NUM_OF_PEDIT_KEYS(TP_PORT_LEN);
|
|
flags |= MLX5_FLOW_ACTION_SET_TP_SRC;
|
|
break;
|
|
case RTE_FLOW_ACTION_TYPE_SET_TP_DST:
|
|
/* TCP is as same as UDP */
|
|
keys += NUM_OF_PEDIT_KEYS(TP_PORT_LEN);
|
|
flags |= MLX5_FLOW_ACTION_SET_TP_DST;
|
|
break;
|
|
default:
|
|
goto get_pedit_action_size_done;
|
|
}
|
|
}
|
|
get_pedit_action_size_done:
|
|
/* TCA_PEDIT_PARAMS_EX */
|
|
pedit_size +=
|
|
SZ_NLATTR_DATA_OF(sizeof(struct tc_pedit_sel) +
|
|
keys * sizeof(struct tc_pedit_key));
|
|
pedit_size += SZ_NLATTR_NEST; /* TCA_PEDIT_KEYS */
|
|
pedit_size += keys *
|
|
/* TCA_PEDIT_KEY_EX + HTYPE + CMD */
|
|
(SZ_NLATTR_NEST + SZ_NLATTR_DATA_OF(2) +
|
|
SZ_NLATTR_DATA_OF(2));
|
|
(*action_flags) |= flags;
|
|
(*actions)--;
|
|
return pedit_size;
|
|
}
|
|
|
|
/**
|
|
* Retrieve mask for pattern item.
|
|
*
|
|
* This function does basic sanity checks on a pattern item in order to
|
|
* return the most appropriate mask for it.
|
|
*
|
|
* @param[in] item
|
|
* Item specification.
|
|
* @param[in] mask_default
|
|
* Default mask for pattern item as specified by the flow API.
|
|
* @param[in] mask_supported
|
|
* Mask fields supported by the implementation.
|
|
* @param[in] mask_empty
|
|
* Empty mask to return when there is no specification.
|
|
* @param[out] error
|
|
* Perform verbose error reporting if not NULL.
|
|
*
|
|
* @return
|
|
* Either @p item->mask or one of the mask parameters on success, NULL
|
|
* otherwise and rte_errno is set.
|
|
*/
|
|
static const void *
|
|
flow_tcf_item_mask(const struct rte_flow_item *item, const void *mask_default,
|
|
const void *mask_supported, const void *mask_empty,
|
|
size_t mask_size, struct rte_flow_error *error)
|
|
{
|
|
const uint8_t *mask;
|
|
size_t i;
|
|
|
|
/* item->last and item->mask cannot exist without item->spec. */
|
|
if (!item->spec && (item->mask || item->last)) {
|
|
rte_flow_error_set(error, EINVAL,
|
|
RTE_FLOW_ERROR_TYPE_ITEM, item,
|
|
"\"mask\" or \"last\" field provided without"
|
|
" a corresponding \"spec\"");
|
|
return NULL;
|
|
}
|
|
/* No spec, no mask, no problem. */
|
|
if (!item->spec)
|
|
return mask_empty;
|
|
mask = item->mask ? item->mask : mask_default;
|
|
assert(mask);
|
|
/*
|
|
* Single-pass check to make sure that:
|
|
* - Mask is supported, no bits are set outside mask_supported.
|
|
* - Both item->spec and item->last are included in mask.
|
|
*/
|
|
for (i = 0; i != mask_size; ++i) {
|
|
if (!mask[i])
|
|
continue;
|
|
if ((mask[i] | ((const uint8_t *)mask_supported)[i]) !=
|
|
((const uint8_t *)mask_supported)[i]) {
|
|
rte_flow_error_set(error, ENOTSUP,
|
|
RTE_FLOW_ERROR_TYPE_ITEM_MASK, mask,
|
|
"unsupported field found"
|
|
" in \"mask\"");
|
|
return NULL;
|
|
}
|
|
if (item->last &&
|
|
(((const uint8_t *)item->spec)[i] & mask[i]) !=
|
|
(((const uint8_t *)item->last)[i] & mask[i])) {
|
|
rte_flow_error_set(error, EINVAL,
|
|
RTE_FLOW_ERROR_TYPE_ITEM_LAST,
|
|
item->last,
|
|
"range between \"spec\" and \"last\""
|
|
" not comprised in \"mask\"");
|
|
return NULL;
|
|
}
|
|
}
|
|
return mask;
|
|
}
|
|
|
|
/**
|
|
* Build a conversion table between port ID and ifindex.
|
|
*
|
|
* @param[in] dev
|
|
* Pointer to Ethernet device.
|
|
* @param[out] ptoi
|
|
* Pointer to ptoi table.
|
|
* @param[in] len
|
|
* Size of ptoi table provided.
|
|
*
|
|
* @return
|
|
* Size of ptoi table filled.
|
|
*/
|
|
static unsigned int
|
|
flow_tcf_build_ptoi_table(struct rte_eth_dev *dev, struct flow_tcf_ptoi *ptoi,
|
|
unsigned int len)
|
|
{
|
|
unsigned int n = mlx5_dev_to_port_id(dev->device, NULL, 0);
|
|
uint16_t port_id[n + 1];
|
|
unsigned int i;
|
|
unsigned int own = 0;
|
|
|
|
/* At least one port is needed when no switch domain is present. */
|
|
if (!n) {
|
|
n = 1;
|
|
port_id[0] = dev->data->port_id;
|
|
} else {
|
|
n = RTE_MIN(mlx5_dev_to_port_id(dev->device, port_id, n), n);
|
|
}
|
|
if (n > len)
|
|
return 0;
|
|
for (i = 0; i != n; ++i) {
|
|
struct rte_eth_dev_info dev_info;
|
|
|
|
rte_eth_dev_info_get(port_id[i], &dev_info);
|
|
if (port_id[i] == dev->data->port_id)
|
|
own = i;
|
|
ptoi[i].port_id = port_id[i];
|
|
ptoi[i].ifindex = dev_info.if_index;
|
|
}
|
|
/* Ensure first entry of ptoi[] is the current device. */
|
|
if (own) {
|
|
ptoi[n] = ptoi[0];
|
|
ptoi[0] = ptoi[own];
|
|
ptoi[own] = ptoi[n];
|
|
}
|
|
/* An entry with zero ifindex terminates ptoi[]. */
|
|
ptoi[n].port_id = 0;
|
|
ptoi[n].ifindex = 0;
|
|
return n;
|
|
}
|
|
|
|
/**
|
|
* Verify the @p attr will be correctly understood by the E-switch.
|
|
*
|
|
* @param[in] attr
|
|
* Pointer to flow attributes
|
|
* @param[out] error
|
|
* Pointer to error structure.
|
|
*
|
|
* @return
|
|
* 0 on success, a negative errno value otherwise and rte_errno is set.
|
|
*/
|
|
static int
|
|
flow_tcf_validate_attributes(const struct rte_flow_attr *attr,
|
|
struct rte_flow_error *error)
|
|
{
|
|
/*
|
|
* Supported attributes: no groups, some priorities and ingress only.
|
|
* Don't care about transfer as it is the caller's problem.
|
|
*/
|
|
if (attr->group)
|
|
return rte_flow_error_set(error, ENOTSUP,
|
|
RTE_FLOW_ERROR_TYPE_ATTR_GROUP, attr,
|
|
"groups are not supported");
|
|
if (attr->priority > 0xfffe)
|
|
return rte_flow_error_set(error, ENOTSUP,
|
|
RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY,
|
|
attr,
|
|
"lowest priority level is 0xfffe");
|
|
if (!attr->ingress)
|
|
return rte_flow_error_set(error, EINVAL,
|
|
RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
|
|
attr, "only ingress is supported");
|
|
if (attr->egress)
|
|
return rte_flow_error_set(error, ENOTSUP,
|
|
RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
|
|
attr, "egress is not supported");
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Validate flow for E-Switch.
|
|
*
|
|
* @param[in] priv
|
|
* Pointer to the priv structure.
|
|
* @param[in] attr
|
|
* Pointer to the flow attributes.
|
|
* @param[in] items
|
|
* Pointer to the list of items.
|
|
* @param[in] actions
|
|
* Pointer to the list of actions.
|
|
* @param[out] error
|
|
* Pointer to the error structure.
|
|
*
|
|
* @return
|
|
* 0 on success, a negative errno value otherwise and rte_ernno is set.
|
|
*/
|
|
static int
|
|
flow_tcf_validate(struct rte_eth_dev *dev,
|
|
const struct rte_flow_attr *attr,
|
|
const struct rte_flow_item items[],
|
|
const struct rte_flow_action actions[],
|
|
struct rte_flow_error *error)
|
|
{
|
|
union {
|
|
const struct rte_flow_item_port_id *port_id;
|
|
const struct rte_flow_item_eth *eth;
|
|
const struct rte_flow_item_vlan *vlan;
|
|
const struct rte_flow_item_ipv4 *ipv4;
|
|
const struct rte_flow_item_ipv6 *ipv6;
|
|
const struct rte_flow_item_tcp *tcp;
|
|
const struct rte_flow_item_udp *udp;
|
|
} spec, mask;
|
|
union {
|
|
const struct rte_flow_action_port_id *port_id;
|
|
const struct rte_flow_action_of_push_vlan *of_push_vlan;
|
|
const struct rte_flow_action_of_set_vlan_vid *
|
|
of_set_vlan_vid;
|
|
const struct rte_flow_action_of_set_vlan_pcp *
|
|
of_set_vlan_pcp;
|
|
const struct rte_flow_action_set_ipv4 *set_ipv4;
|
|
const struct rte_flow_action_set_ipv6 *set_ipv6;
|
|
} conf;
|
|
uint32_t item_flags = 0;
|
|
uint32_t action_flags = 0;
|
|
uint8_t next_protocol = -1;
|
|
unsigned int tcm_ifindex = 0;
|
|
uint8_t pedit_validated = 0;
|
|
struct flow_tcf_ptoi ptoi[PTOI_TABLE_SZ_MAX(dev)];
|
|
struct rte_eth_dev *port_id_dev = NULL;
|
|
bool in_port_id_set;
|
|
int ret;
|
|
|
|
claim_nonzero(flow_tcf_build_ptoi_table(dev, ptoi,
|
|
PTOI_TABLE_SZ_MAX(dev)));
|
|
ret = flow_tcf_validate_attributes(attr, error);
|
|
if (ret < 0)
|
|
return ret;
|
|
for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
|
|
unsigned int i;
|
|
|
|
switch (items->type) {
|
|
case RTE_FLOW_ITEM_TYPE_VOID:
|
|
break;
|
|
case RTE_FLOW_ITEM_TYPE_PORT_ID:
|
|
mask.port_id = flow_tcf_item_mask
|
|
(items, &rte_flow_item_port_id_mask,
|
|
&flow_tcf_mask_supported.port_id,
|
|
&flow_tcf_mask_empty.port_id,
|
|
sizeof(flow_tcf_mask_supported.port_id),
|
|
error);
|
|
if (!mask.port_id)
|
|
return -rte_errno;
|
|
if (mask.port_id == &flow_tcf_mask_empty.port_id) {
|
|
in_port_id_set = 1;
|
|
break;
|
|
}
|
|
spec.port_id = items->spec;
|
|
if (mask.port_id->id && mask.port_id->id != 0xffffffff)
|
|
return rte_flow_error_set
|
|
(error, ENOTSUP,
|
|
RTE_FLOW_ERROR_TYPE_ITEM_MASK,
|
|
mask.port_id,
|
|
"no support for partial mask on"
|
|
" \"id\" field");
|
|
if (!mask.port_id->id)
|
|
i = 0;
|
|
else
|
|
for (i = 0; ptoi[i].ifindex; ++i)
|
|
if (ptoi[i].port_id == spec.port_id->id)
|
|
break;
|
|
if (!ptoi[i].ifindex)
|
|
return rte_flow_error_set
|
|
(error, ENODEV,
|
|
RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
|
|
spec.port_id,
|
|
"missing data to convert port ID to"
|
|
" ifindex");
|
|
if (in_port_id_set && ptoi[i].ifindex != tcm_ifindex)
|
|
return rte_flow_error_set
|
|
(error, ENOTSUP,
|
|
RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
|
|
spec.port_id,
|
|
"cannot match traffic for"
|
|
" several port IDs through"
|
|
" a single flow rule");
|
|
tcm_ifindex = ptoi[i].ifindex;
|
|
in_port_id_set = 1;
|
|
break;
|
|
case RTE_FLOW_ITEM_TYPE_ETH:
|
|
ret = mlx5_flow_validate_item_eth(items, item_flags,
|
|
error);
|
|
if (ret < 0)
|
|
return ret;
|
|
item_flags |= MLX5_FLOW_LAYER_OUTER_L2;
|
|
/* TODO:
|
|
* Redundant check due to different supported mask.
|
|
* Same for the rest of items.
|
|
*/
|
|
mask.eth = flow_tcf_item_mask
|
|
(items, &rte_flow_item_eth_mask,
|
|
&flow_tcf_mask_supported.eth,
|
|
&flow_tcf_mask_empty.eth,
|
|
sizeof(flow_tcf_mask_supported.eth),
|
|
error);
|
|
if (!mask.eth)
|
|
return -rte_errno;
|
|
if (mask.eth->type && mask.eth->type !=
|
|
RTE_BE16(0xffff))
|
|
return rte_flow_error_set
|
|
(error, ENOTSUP,
|
|
RTE_FLOW_ERROR_TYPE_ITEM_MASK,
|
|
mask.eth,
|
|
"no support for partial mask on"
|
|
" \"type\" field");
|
|
break;
|
|
case RTE_FLOW_ITEM_TYPE_VLAN:
|
|
ret = mlx5_flow_validate_item_vlan(items, item_flags,
|
|
error);
|
|
if (ret < 0)
|
|
return ret;
|
|
item_flags |= MLX5_FLOW_LAYER_OUTER_VLAN;
|
|
mask.vlan = flow_tcf_item_mask
|
|
(items, &rte_flow_item_vlan_mask,
|
|
&flow_tcf_mask_supported.vlan,
|
|
&flow_tcf_mask_empty.vlan,
|
|
sizeof(flow_tcf_mask_supported.vlan),
|
|
error);
|
|
if (!mask.vlan)
|
|
return -rte_errno;
|
|
if ((mask.vlan->tci & RTE_BE16(0xe000) &&
|
|
(mask.vlan->tci & RTE_BE16(0xe000)) !=
|
|
RTE_BE16(0xe000)) ||
|
|
(mask.vlan->tci & RTE_BE16(0x0fff) &&
|
|
(mask.vlan->tci & RTE_BE16(0x0fff)) !=
|
|
RTE_BE16(0x0fff)) ||
|
|
(mask.vlan->inner_type &&
|
|
mask.vlan->inner_type != RTE_BE16(0xffff)))
|
|
return rte_flow_error_set
|
|
(error, ENOTSUP,
|
|
RTE_FLOW_ERROR_TYPE_ITEM_MASK,
|
|
mask.vlan,
|
|
"no support for partial masks on"
|
|
" \"tci\" (PCP and VID parts) and"
|
|
" \"inner_type\" fields");
|
|
break;
|
|
case RTE_FLOW_ITEM_TYPE_IPV4:
|
|
ret = mlx5_flow_validate_item_ipv4(items, item_flags,
|
|
error);
|
|
if (ret < 0)
|
|
return ret;
|
|
item_flags |= MLX5_FLOW_LAYER_OUTER_L3_IPV4;
|
|
mask.ipv4 = flow_tcf_item_mask
|
|
(items, &rte_flow_item_ipv4_mask,
|
|
&flow_tcf_mask_supported.ipv4,
|
|
&flow_tcf_mask_empty.ipv4,
|
|
sizeof(flow_tcf_mask_supported.ipv4),
|
|
error);
|
|
if (!mask.ipv4)
|
|
return -rte_errno;
|
|
if (mask.ipv4->hdr.next_proto_id &&
|
|
mask.ipv4->hdr.next_proto_id != 0xff)
|
|
return rte_flow_error_set
|
|
(error, ENOTSUP,
|
|
RTE_FLOW_ERROR_TYPE_ITEM_MASK,
|
|
mask.ipv4,
|
|
"no support for partial mask on"
|
|
" \"hdr.next_proto_id\" field");
|
|
else if (mask.ipv4->hdr.next_proto_id)
|
|
next_protocol =
|
|
((const struct rte_flow_item_ipv4 *)
|
|
(items->spec))->hdr.next_proto_id;
|
|
break;
|
|
case RTE_FLOW_ITEM_TYPE_IPV6:
|
|
ret = mlx5_flow_validate_item_ipv6(items, item_flags,
|
|
error);
|
|
if (ret < 0)
|
|
return ret;
|
|
item_flags |= MLX5_FLOW_LAYER_OUTER_L3_IPV6;
|
|
mask.ipv6 = flow_tcf_item_mask
|
|
(items, &rte_flow_item_ipv6_mask,
|
|
&flow_tcf_mask_supported.ipv6,
|
|
&flow_tcf_mask_empty.ipv6,
|
|
sizeof(flow_tcf_mask_supported.ipv6),
|
|
error);
|
|
if (!mask.ipv6)
|
|
return -rte_errno;
|
|
if (mask.ipv6->hdr.proto &&
|
|
mask.ipv6->hdr.proto != 0xff)
|
|
return rte_flow_error_set
|
|
(error, ENOTSUP,
|
|
RTE_FLOW_ERROR_TYPE_ITEM_MASK,
|
|
mask.ipv6,
|
|
"no support for partial mask on"
|
|
" \"hdr.proto\" field");
|
|
else if (mask.ipv6->hdr.proto)
|
|
next_protocol =
|
|
((const struct rte_flow_item_ipv6 *)
|
|
(items->spec))->hdr.proto;
|
|
break;
|
|
case RTE_FLOW_ITEM_TYPE_UDP:
|
|
ret = mlx5_flow_validate_item_udp(items, item_flags,
|
|
next_protocol, error);
|
|
if (ret < 0)
|
|
return ret;
|
|
item_flags |= MLX5_FLOW_LAYER_OUTER_L4_UDP;
|
|
mask.udp = flow_tcf_item_mask
|
|
(items, &rte_flow_item_udp_mask,
|
|
&flow_tcf_mask_supported.udp,
|
|
&flow_tcf_mask_empty.udp,
|
|
sizeof(flow_tcf_mask_supported.udp),
|
|
error);
|
|
if (!mask.udp)
|
|
return -rte_errno;
|
|
break;
|
|
case RTE_FLOW_ITEM_TYPE_TCP:
|
|
ret = mlx5_flow_validate_item_tcp
|
|
(items, item_flags,
|
|
next_protocol,
|
|
&flow_tcf_mask_supported.tcp,
|
|
error);
|
|
if (ret < 0)
|
|
return ret;
|
|
item_flags |= MLX5_FLOW_LAYER_OUTER_L4_TCP;
|
|
mask.tcp = flow_tcf_item_mask
|
|
(items, &rte_flow_item_tcp_mask,
|
|
&flow_tcf_mask_supported.tcp,
|
|
&flow_tcf_mask_empty.tcp,
|
|
sizeof(flow_tcf_mask_supported.tcp),
|
|
error);
|
|
if (!mask.tcp)
|
|
return -rte_errno;
|
|
break;
|
|
default:
|
|
return rte_flow_error_set(error, ENOTSUP,
|
|
RTE_FLOW_ERROR_TYPE_ITEM,
|
|
NULL, "item not supported");
|
|
}
|
|
}
|
|
for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
|
|
unsigned int i;
|
|
uint32_t current_action_flag = 0;
|
|
|
|
switch (actions->type) {
|
|
case RTE_FLOW_ACTION_TYPE_VOID:
|
|
break;
|
|
case RTE_FLOW_ACTION_TYPE_PORT_ID:
|
|
current_action_flag = MLX5_FLOW_ACTION_PORT_ID;
|
|
if (action_flags & MLX5_TCF_FATE_ACTIONS)
|
|
return rte_flow_error_set
|
|
(error, EINVAL,
|
|
RTE_FLOW_ERROR_TYPE_ACTION, actions,
|
|
"can't have multiple fate actions");
|
|
if (!actions->conf)
|
|
break;
|
|
conf.port_id = actions->conf;
|
|
if (conf.port_id->original)
|
|
i = 0;
|
|
else
|
|
for (i = 0; ptoi[i].ifindex; ++i)
|
|
if (ptoi[i].port_id == conf.port_id->id)
|
|
break;
|
|
if (!ptoi[i].ifindex)
|
|
return rte_flow_error_set
|
|
(error, ENODEV,
|
|
RTE_FLOW_ERROR_TYPE_ACTION_CONF,
|
|
conf.port_id,
|
|
"missing data to convert port ID to"
|
|
" ifindex");
|
|
port_id_dev = &rte_eth_devices[conf.port_id->id];
|
|
break;
|
|
case RTE_FLOW_ACTION_TYPE_DROP:
|
|
if (action_flags & MLX5_TCF_FATE_ACTIONS)
|
|
return rte_flow_error_set
|
|
(error, EINVAL,
|
|
RTE_FLOW_ERROR_TYPE_ACTION, actions,
|
|
"can't have multiple fate actions");
|
|
current_action_flag = MLX5_FLOW_ACTION_DROP;
|
|
break;
|
|
case RTE_FLOW_ACTION_TYPE_OF_POP_VLAN:
|
|
current_action_flag = MLX5_FLOW_ACTION_OF_POP_VLAN;
|
|
break;
|
|
case RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN:
|
|
current_action_flag = MLX5_FLOW_ACTION_OF_PUSH_VLAN;
|
|
break;
|
|
case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID:
|
|
if (!(action_flags & MLX5_FLOW_ACTION_OF_PUSH_VLAN))
|
|
return rte_flow_error_set
|
|
(error, ENOTSUP,
|
|
RTE_FLOW_ERROR_TYPE_ACTION, actions,
|
|
"vlan modify is not supported,"
|
|
" set action must follow push action");
|
|
current_action_flag = MLX5_FLOW_ACTION_OF_SET_VLAN_VID;
|
|
break;
|
|
case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP:
|
|
if (!(action_flags & MLX5_FLOW_ACTION_OF_PUSH_VLAN))
|
|
return rte_flow_error_set
|
|
(error, ENOTSUP,
|
|
RTE_FLOW_ERROR_TYPE_ACTION, actions,
|
|
"vlan modify is not supported,"
|
|
" set action must follow push action");
|
|
current_action_flag = MLX5_FLOW_ACTION_OF_SET_VLAN_PCP;
|
|
break;
|
|
case RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC:
|
|
current_action_flag = MLX5_FLOW_ACTION_SET_IPV4_SRC;
|
|
break;
|
|
case RTE_FLOW_ACTION_TYPE_SET_IPV4_DST:
|
|
current_action_flag = MLX5_FLOW_ACTION_SET_IPV4_DST;
|
|
break;
|
|
case RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC:
|
|
current_action_flag = MLX5_FLOW_ACTION_SET_IPV6_SRC;
|
|
break;
|
|
case RTE_FLOW_ACTION_TYPE_SET_IPV6_DST:
|
|
current_action_flag = MLX5_FLOW_ACTION_SET_IPV6_DST;
|
|
break;
|
|
case RTE_FLOW_ACTION_TYPE_SET_TP_SRC:
|
|
current_action_flag = MLX5_FLOW_ACTION_SET_TP_SRC;
|
|
break;
|
|
case RTE_FLOW_ACTION_TYPE_SET_TP_DST:
|
|
current_action_flag = MLX5_FLOW_ACTION_SET_TP_DST;
|
|
break;
|
|
default:
|
|
return rte_flow_error_set(error, ENOTSUP,
|
|
RTE_FLOW_ERROR_TYPE_ACTION,
|
|
actions,
|
|
"action not supported");
|
|
}
|
|
if (current_action_flag & MLX5_TCF_CONFIG_ACTIONS) {
|
|
if (!actions->conf)
|
|
return rte_flow_error_set(error, EINVAL,
|
|
RTE_FLOW_ERROR_TYPE_ACTION_CONF,
|
|
actions,
|
|
"action configuration not set");
|
|
}
|
|
if ((current_action_flag & MLX5_TCF_PEDIT_ACTIONS) &&
|
|
pedit_validated)
|
|
return rte_flow_error_set(error, ENOTSUP,
|
|
RTE_FLOW_ERROR_TYPE_ACTION,
|
|
actions,
|
|
"set actions should be "
|
|
"listed successively");
|
|
if ((current_action_flag & ~MLX5_TCF_PEDIT_ACTIONS) &&
|
|
(action_flags & MLX5_TCF_PEDIT_ACTIONS))
|
|
pedit_validated = 1;
|
|
action_flags |= current_action_flag;
|
|
}
|
|
if ((action_flags & MLX5_TCF_PEDIT_ACTIONS) &&
|
|
(action_flags & MLX5_FLOW_ACTION_DROP))
|
|
return rte_flow_error_set(error, ENOTSUP,
|
|
RTE_FLOW_ERROR_TYPE_ACTION,
|
|
actions,
|
|
"set action is not compatible with "
|
|
"drop action");
|
|
if ((action_flags & MLX5_TCF_PEDIT_ACTIONS) &&
|
|
!(action_flags & MLX5_FLOW_ACTION_PORT_ID))
|
|
return rte_flow_error_set(error, ENOTSUP,
|
|
RTE_FLOW_ERROR_TYPE_ACTION,
|
|
actions,
|
|
"set action must be followed by "
|
|
"port_id action");
|
|
if (action_flags &
|
|
(MLX5_FLOW_ACTION_SET_IPV4_SRC | MLX5_FLOW_ACTION_SET_IPV4_DST)) {
|
|
if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L3_IPV4))
|
|
return rte_flow_error_set(error, EINVAL,
|
|
RTE_FLOW_ERROR_TYPE_ACTION,
|
|
actions,
|
|
"no ipv4 item found in"
|
|
" pattern");
|
|
}
|
|
if (action_flags &
|
|
(MLX5_FLOW_ACTION_SET_IPV6_SRC | MLX5_FLOW_ACTION_SET_IPV6_DST)) {
|
|
if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L3_IPV6))
|
|
return rte_flow_error_set(error, EINVAL,
|
|
RTE_FLOW_ERROR_TYPE_ACTION,
|
|
actions,
|
|
"no ipv6 item found in"
|
|
" pattern");
|
|
}
|
|
if (action_flags &
|
|
(MLX5_FLOW_ACTION_SET_TP_SRC | MLX5_FLOW_ACTION_SET_TP_DST)) {
|
|
if (!(item_flags &
|
|
(MLX5_FLOW_LAYER_OUTER_L4_UDP |
|
|
MLX5_FLOW_LAYER_OUTER_L4_TCP)))
|
|
return rte_flow_error_set(error, EINVAL,
|
|
RTE_FLOW_ERROR_TYPE_ACTION,
|
|
actions,
|
|
"no TCP/UDP item found in"
|
|
" pattern");
|
|
}
|
|
/*
|
|
* FW syndrome (0xA9C090):
|
|
* set_flow_table_entry: push vlan action fte in fdb can ONLY be
|
|
* forward to the uplink.
|
|
*/
|
|
if ((action_flags & MLX5_FLOW_ACTION_OF_PUSH_VLAN) &&
|
|
(action_flags & MLX5_FLOW_ACTION_PORT_ID) &&
|
|
((struct priv *)port_id_dev->data->dev_private)->representor)
|
|
return rte_flow_error_set(error, ENOTSUP,
|
|
RTE_FLOW_ERROR_TYPE_ACTION, actions,
|
|
"vlan push can only be applied"
|
|
" when forwarding to uplink port");
|
|
/*
|
|
* FW syndrome (0x294609):
|
|
* set_flow_table_entry: modify/pop/push actions in fdb flow table
|
|
* are supported only while forwarding to vport.
|
|
*/
|
|
if ((action_flags & MLX5_TCF_VLAN_ACTIONS) &&
|
|
!(action_flags & MLX5_FLOW_ACTION_PORT_ID))
|
|
return rte_flow_error_set(error, ENOTSUP,
|
|
RTE_FLOW_ERROR_TYPE_ACTION, actions,
|
|
"vlan actions are supported"
|
|
" only with port_id action");
|
|
if (!(action_flags & MLX5_TCF_FATE_ACTIONS))
|
|
return rte_flow_error_set(error, EINVAL,
|
|
RTE_FLOW_ERROR_TYPE_ACTION, actions,
|
|
"no fate action is found");
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Calculate maximum size of memory for flow items of Linux TC flower and
|
|
* extract specified items.
|
|
*
|
|
* @param[in] items
|
|
* Pointer to the list of items.
|
|
* @param[out] item_flags
|
|
* Pointer to the detected items.
|
|
*
|
|
* @return
|
|
* Maximum size of memory for items.
|
|
*/
|
|
static int
|
|
flow_tcf_get_items_and_size(const struct rte_flow_item items[],
|
|
uint64_t *item_flags)
|
|
{
|
|
int size = 0;
|
|
uint64_t flags = 0;
|
|
|
|
size += SZ_NLATTR_STRZ_OF("flower") +
|
|
SZ_NLATTR_NEST + /* TCA_OPTIONS. */
|
|
SZ_NLATTR_TYPE_OF(uint32_t); /* TCA_CLS_FLAGS_SKIP_SW. */
|
|
for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
|
|
switch (items->type) {
|
|
case RTE_FLOW_ITEM_TYPE_VOID:
|
|
break;
|
|
case RTE_FLOW_ITEM_TYPE_PORT_ID:
|
|
break;
|
|
case RTE_FLOW_ITEM_TYPE_ETH:
|
|
size += SZ_NLATTR_TYPE_OF(uint16_t) + /* Ether type. */
|
|
SZ_NLATTR_DATA_OF(ETHER_ADDR_LEN) * 4;
|
|
/* dst/src MAC addr and mask. */
|
|
flags |= MLX5_FLOW_LAYER_OUTER_L2;
|
|
break;
|
|
case RTE_FLOW_ITEM_TYPE_VLAN:
|
|
size += SZ_NLATTR_TYPE_OF(uint16_t) + /* Ether type. */
|
|
SZ_NLATTR_TYPE_OF(uint16_t) +
|
|
/* VLAN Ether type. */
|
|
SZ_NLATTR_TYPE_OF(uint8_t) + /* VLAN prio. */
|
|
SZ_NLATTR_TYPE_OF(uint16_t); /* VLAN ID. */
|
|
flags |= MLX5_FLOW_LAYER_OUTER_VLAN;
|
|
break;
|
|
case RTE_FLOW_ITEM_TYPE_IPV4:
|
|
size += SZ_NLATTR_TYPE_OF(uint16_t) + /* Ether type. */
|
|
SZ_NLATTR_TYPE_OF(uint8_t) + /* IP proto. */
|
|
SZ_NLATTR_TYPE_OF(uint32_t) * 4;
|
|
/* dst/src IP addr and mask. */
|
|
flags |= MLX5_FLOW_LAYER_OUTER_L3_IPV4;
|
|
break;
|
|
case RTE_FLOW_ITEM_TYPE_IPV6:
|
|
size += SZ_NLATTR_TYPE_OF(uint16_t) + /* Ether type. */
|
|
SZ_NLATTR_TYPE_OF(uint8_t) + /* IP proto. */
|
|
SZ_NLATTR_TYPE_OF(IPV6_ADDR_LEN) * 4;
|
|
/* dst/src IP addr and mask. */
|
|
flags |= MLX5_FLOW_LAYER_OUTER_L3_IPV6;
|
|
break;
|
|
case RTE_FLOW_ITEM_TYPE_UDP:
|
|
size += SZ_NLATTR_TYPE_OF(uint8_t) + /* IP proto. */
|
|
SZ_NLATTR_TYPE_OF(uint16_t) * 4;
|
|
/* dst/src port and mask. */
|
|
flags |= MLX5_FLOW_LAYER_OUTER_L4_UDP;
|
|
break;
|
|
case RTE_FLOW_ITEM_TYPE_TCP:
|
|
size += SZ_NLATTR_TYPE_OF(uint8_t) + /* IP proto. */
|
|
SZ_NLATTR_TYPE_OF(uint16_t) * 4;
|
|
/* dst/src port and mask. */
|
|
flags |= MLX5_FLOW_LAYER_OUTER_L4_TCP;
|
|
break;
|
|
default:
|
|
DRV_LOG(WARNING,
|
|
"unsupported item %p type %d,"
|
|
" items must be validated before flow creation",
|
|
(const void *)items, items->type);
|
|
break;
|
|
}
|
|
}
|
|
*item_flags = flags;
|
|
return size;
|
|
}
|
|
|
|
/**
|
|
* Calculate maximum size of memory for flow actions of Linux TC flower and
|
|
* extract specified actions.
|
|
*
|
|
* @param[in] actions
|
|
* Pointer to the list of actions.
|
|
* @param[out] action_flags
|
|
* Pointer to the detected actions.
|
|
*
|
|
* @return
|
|
* Maximum size of memory for actions.
|
|
*/
|
|
static int
|
|
flow_tcf_get_actions_and_size(const struct rte_flow_action actions[],
|
|
uint64_t *action_flags)
|
|
{
|
|
int size = 0;
|
|
uint64_t flags = 0;
|
|
|
|
size += SZ_NLATTR_NEST; /* TCA_FLOWER_ACT. */
|
|
for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
|
|
switch (actions->type) {
|
|
case RTE_FLOW_ACTION_TYPE_VOID:
|
|
break;
|
|
case RTE_FLOW_ACTION_TYPE_PORT_ID:
|
|
size += SZ_NLATTR_NEST + /* na_act_index. */
|
|
SZ_NLATTR_STRZ_OF("mirred") +
|
|
SZ_NLATTR_NEST + /* TCA_ACT_OPTIONS. */
|
|
SZ_NLATTR_TYPE_OF(struct tc_mirred);
|
|
flags |= MLX5_FLOW_ACTION_PORT_ID;
|
|
break;
|
|
case RTE_FLOW_ACTION_TYPE_DROP:
|
|
size += SZ_NLATTR_NEST + /* na_act_index. */
|
|
SZ_NLATTR_STRZ_OF("gact") +
|
|
SZ_NLATTR_NEST + /* TCA_ACT_OPTIONS. */
|
|
SZ_NLATTR_TYPE_OF(struct tc_gact);
|
|
flags |= MLX5_FLOW_ACTION_DROP;
|
|
break;
|
|
case RTE_FLOW_ACTION_TYPE_OF_POP_VLAN:
|
|
flags |= MLX5_FLOW_ACTION_OF_POP_VLAN;
|
|
goto action_of_vlan;
|
|
case RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN:
|
|
flags |= MLX5_FLOW_ACTION_OF_PUSH_VLAN;
|
|
goto action_of_vlan;
|
|
case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID:
|
|
flags |= MLX5_FLOW_ACTION_OF_SET_VLAN_VID;
|
|
goto action_of_vlan;
|
|
case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP:
|
|
flags |= MLX5_FLOW_ACTION_OF_SET_VLAN_PCP;
|
|
goto action_of_vlan;
|
|
action_of_vlan:
|
|
size += SZ_NLATTR_NEST + /* na_act_index. */
|
|
SZ_NLATTR_STRZ_OF("vlan") +
|
|
SZ_NLATTR_NEST + /* TCA_ACT_OPTIONS. */
|
|
SZ_NLATTR_TYPE_OF(struct tc_vlan) +
|
|
SZ_NLATTR_TYPE_OF(uint16_t) +
|
|
/* VLAN protocol. */
|
|
SZ_NLATTR_TYPE_OF(uint16_t) + /* VLAN ID. */
|
|
SZ_NLATTR_TYPE_OF(uint8_t); /* VLAN prio. */
|
|
break;
|
|
case RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC:
|
|
case RTE_FLOW_ACTION_TYPE_SET_IPV4_DST:
|
|
case RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC:
|
|
case RTE_FLOW_ACTION_TYPE_SET_IPV6_DST:
|
|
case RTE_FLOW_ACTION_TYPE_SET_TP_SRC:
|
|
case RTE_FLOW_ACTION_TYPE_SET_TP_DST:
|
|
size += flow_tcf_get_pedit_actions_size(&actions,
|
|
&flags);
|
|
break;
|
|
default:
|
|
DRV_LOG(WARNING,
|
|
"unsupported action %p type %d,"
|
|
" items must be validated before flow creation",
|
|
(const void *)actions, actions->type);
|
|
break;
|
|
}
|
|
}
|
|
*action_flags = flags;
|
|
return size;
|
|
}
|
|
|
|
/**
|
|
* Brand rtnetlink buffer with unique handle.
|
|
*
|
|
* This handle should be unique for a given network interface to avoid
|
|
* collisions.
|
|
*
|
|
* @param nlh
|
|
* Pointer to Netlink message.
|
|
* @param handle
|
|
* Unique 32-bit handle to use.
|
|
*/
|
|
static void
|
|
flow_tcf_nl_brand(struct nlmsghdr *nlh, uint32_t handle)
|
|
{
|
|
struct tcmsg *tcm = mnl_nlmsg_get_payload(nlh);
|
|
|
|
tcm->tcm_handle = handle;
|
|
DRV_LOG(DEBUG, "Netlink msg %p is branded with handle %x",
|
|
(void *)nlh, handle);
|
|
}
|
|
|
|
/**
|
|
* Prepare a flow object for Linux TC flower. It calculates the maximum size of
|
|
* memory required, allocates the memory, initializes Netlink message headers
|
|
* and set unique TC message handle.
|
|
*
|
|
* @param[in] attr
|
|
* Pointer to the flow attributes.
|
|
* @param[in] items
|
|
* Pointer to the list of items.
|
|
* @param[in] actions
|
|
* Pointer to the list of actions.
|
|
* @param[out] item_flags
|
|
* Pointer to bit mask of all items detected.
|
|
* @param[out] action_flags
|
|
* Pointer to bit mask of all actions detected.
|
|
* @param[out] error
|
|
* Pointer to the error structure.
|
|
*
|
|
* @return
|
|
* Pointer to mlx5_flow object on success,
|
|
* otherwise NULL and rte_ernno is set.
|
|
*/
|
|
static struct mlx5_flow *
|
|
flow_tcf_prepare(const struct rte_flow_attr *attr __rte_unused,
|
|
const struct rte_flow_item items[],
|
|
const struct rte_flow_action actions[],
|
|
uint64_t *item_flags, uint64_t *action_flags,
|
|
struct rte_flow_error *error)
|
|
{
|
|
size_t size = sizeof(struct mlx5_flow) +
|
|
MNL_ALIGN(sizeof(struct nlmsghdr)) +
|
|
MNL_ALIGN(sizeof(struct tcmsg));
|
|
struct mlx5_flow *dev_flow;
|
|
struct nlmsghdr *nlh;
|
|
struct tcmsg *tcm;
|
|
|
|
size += flow_tcf_get_items_and_size(items, item_flags);
|
|
size += flow_tcf_get_actions_and_size(actions, action_flags);
|
|
dev_flow = rte_zmalloc(__func__, size, MNL_ALIGNTO);
|
|
if (!dev_flow) {
|
|
rte_flow_error_set(error, ENOMEM,
|
|
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
|
|
"not enough memory to create E-Switch flow");
|
|
return NULL;
|
|
}
|
|
nlh = mnl_nlmsg_put_header((void *)(dev_flow + 1));
|
|
tcm = mnl_nlmsg_put_extra_header(nlh, sizeof(*tcm));
|
|
*dev_flow = (struct mlx5_flow){
|
|
.tcf = (struct mlx5_flow_tcf){
|
|
.nlh = nlh,
|
|
.tcm = tcm,
|
|
},
|
|
};
|
|
/*
|
|
* Generate a reasonably unique handle based on the address of the
|
|
* target buffer.
|
|
*
|
|
* This is straightforward on 32-bit systems where the flow pointer can
|
|
* be used directly. Otherwise, its least significant part is taken
|
|
* after shifting it by the previous power of two of the pointed buffer
|
|
* size.
|
|
*/
|
|
if (sizeof(dev_flow) <= 4)
|
|
flow_tcf_nl_brand(nlh, (uintptr_t)dev_flow);
|
|
else
|
|
flow_tcf_nl_brand(nlh, (uintptr_t)dev_flow >>
|
|
rte_log2_u32(rte_align32prevpow2(size)));
|
|
return dev_flow;
|
|
}
|
|
|
|
/**
|
|
* Translate flow for Linux TC flower and construct Netlink message.
|
|
*
|
|
* @param[in] priv
|
|
* Pointer to the priv structure.
|
|
* @param[in, out] flow
|
|
* Pointer to the sub flow.
|
|
* @param[in] attr
|
|
* Pointer to the flow attributes.
|
|
* @param[in] items
|
|
* Pointer to the list of items.
|
|
* @param[in] actions
|
|
* Pointer to the list of actions.
|
|
* @param[out] error
|
|
* Pointer to the error structure.
|
|
*
|
|
* @return
|
|
* 0 on success, a negative errno value otherwise and rte_ernno is set.
|
|
*/
|
|
static int
|
|
flow_tcf_translate(struct rte_eth_dev *dev, struct mlx5_flow *dev_flow,
|
|
const struct rte_flow_attr *attr,
|
|
const struct rte_flow_item items[],
|
|
const struct rte_flow_action actions[],
|
|
struct rte_flow_error *error)
|
|
{
|
|
union {
|
|
const struct rte_flow_item_port_id *port_id;
|
|
const struct rte_flow_item_eth *eth;
|
|
const struct rte_flow_item_vlan *vlan;
|
|
const struct rte_flow_item_ipv4 *ipv4;
|
|
const struct rte_flow_item_ipv6 *ipv6;
|
|
const struct rte_flow_item_tcp *tcp;
|
|
const struct rte_flow_item_udp *udp;
|
|
} spec, mask;
|
|
union {
|
|
const struct rte_flow_action_port_id *port_id;
|
|
const struct rte_flow_action_of_push_vlan *of_push_vlan;
|
|
const struct rte_flow_action_of_set_vlan_vid *
|
|
of_set_vlan_vid;
|
|
const struct rte_flow_action_of_set_vlan_pcp *
|
|
of_set_vlan_pcp;
|
|
} conf;
|
|
struct flow_tcf_ptoi ptoi[PTOI_TABLE_SZ_MAX(dev)];
|
|
struct nlmsghdr *nlh = dev_flow->tcf.nlh;
|
|
struct tcmsg *tcm = dev_flow->tcf.tcm;
|
|
uint32_t na_act_index_cur;
|
|
bool eth_type_set = 0;
|
|
bool vlan_present = 0;
|
|
bool vlan_eth_type_set = 0;
|
|
bool ip_proto_set = 0;
|
|
struct nlattr *na_flower;
|
|
struct nlattr *na_flower_act;
|
|
struct nlattr *na_vlan_id = NULL;
|
|
struct nlattr *na_vlan_priority = NULL;
|
|
uint64_t item_flags = 0;
|
|
|
|
claim_nonzero(flow_tcf_build_ptoi_table(dev, ptoi,
|
|
PTOI_TABLE_SZ_MAX(dev)));
|
|
nlh = dev_flow->tcf.nlh;
|
|
tcm = dev_flow->tcf.tcm;
|
|
/* Prepare API must have been called beforehand. */
|
|
assert(nlh != NULL && tcm != NULL);
|
|
tcm->tcm_family = AF_UNSPEC;
|
|
tcm->tcm_ifindex = ptoi[0].ifindex;
|
|
tcm->tcm_parent = TC_H_MAKE(TC_H_INGRESS, TC_H_MIN_INGRESS);
|
|
/*
|
|
* Priority cannot be zero to prevent the kernel from picking one
|
|
* automatically.
|
|
*/
|
|
tcm->tcm_info = TC_H_MAKE((attr->priority + 1) << 16,
|
|
RTE_BE16(ETH_P_ALL));
|
|
mnl_attr_put_strz(nlh, TCA_KIND, "flower");
|
|
na_flower = mnl_attr_nest_start(nlh, TCA_OPTIONS);
|
|
mnl_attr_put_u32(nlh, TCA_FLOWER_FLAGS, TCA_CLS_FLAGS_SKIP_SW);
|
|
for (; items->type != RTE_FLOW_ITEM_TYPE_END; items++) {
|
|
unsigned int i;
|
|
|
|
switch (items->type) {
|
|
case RTE_FLOW_ITEM_TYPE_VOID:
|
|
break;
|
|
case RTE_FLOW_ITEM_TYPE_PORT_ID:
|
|
mask.port_id = flow_tcf_item_mask
|
|
(items, &rte_flow_item_port_id_mask,
|
|
&flow_tcf_mask_supported.port_id,
|
|
&flow_tcf_mask_empty.port_id,
|
|
sizeof(flow_tcf_mask_supported.port_id),
|
|
error);
|
|
assert(mask.port_id);
|
|
if (mask.port_id == &flow_tcf_mask_empty.port_id)
|
|
break;
|
|
spec.port_id = items->spec;
|
|
if (!mask.port_id->id)
|
|
i = 0;
|
|
else
|
|
for (i = 0; ptoi[i].ifindex; ++i)
|
|
if (ptoi[i].port_id == spec.port_id->id)
|
|
break;
|
|
assert(ptoi[i].ifindex);
|
|
tcm->tcm_ifindex = ptoi[i].ifindex;
|
|
break;
|
|
case RTE_FLOW_ITEM_TYPE_ETH:
|
|
item_flags |= MLX5_FLOW_LAYER_OUTER_L2;
|
|
mask.eth = flow_tcf_item_mask
|
|
(items, &rte_flow_item_eth_mask,
|
|
&flow_tcf_mask_supported.eth,
|
|
&flow_tcf_mask_empty.eth,
|
|
sizeof(flow_tcf_mask_supported.eth),
|
|
error);
|
|
assert(mask.eth);
|
|
if (mask.eth == &flow_tcf_mask_empty.eth)
|
|
break;
|
|
spec.eth = items->spec;
|
|
if (mask.eth->type) {
|
|
mnl_attr_put_u16(nlh, TCA_FLOWER_KEY_ETH_TYPE,
|
|
spec.eth->type);
|
|
eth_type_set = 1;
|
|
}
|
|
if (!is_zero_ether_addr(&mask.eth->dst)) {
|
|
mnl_attr_put(nlh, TCA_FLOWER_KEY_ETH_DST,
|
|
ETHER_ADDR_LEN,
|
|
spec.eth->dst.addr_bytes);
|
|
mnl_attr_put(nlh, TCA_FLOWER_KEY_ETH_DST_MASK,
|
|
ETHER_ADDR_LEN,
|
|
mask.eth->dst.addr_bytes);
|
|
}
|
|
if (!is_zero_ether_addr(&mask.eth->src)) {
|
|
mnl_attr_put(nlh, TCA_FLOWER_KEY_ETH_SRC,
|
|
ETHER_ADDR_LEN,
|
|
spec.eth->src.addr_bytes);
|
|
mnl_attr_put(nlh, TCA_FLOWER_KEY_ETH_SRC_MASK,
|
|
ETHER_ADDR_LEN,
|
|
mask.eth->src.addr_bytes);
|
|
}
|
|
break;
|
|
case RTE_FLOW_ITEM_TYPE_VLAN:
|
|
item_flags |= MLX5_FLOW_LAYER_OUTER_VLAN;
|
|
mask.vlan = flow_tcf_item_mask
|
|
(items, &rte_flow_item_vlan_mask,
|
|
&flow_tcf_mask_supported.vlan,
|
|
&flow_tcf_mask_empty.vlan,
|
|
sizeof(flow_tcf_mask_supported.vlan),
|
|
error);
|
|
assert(mask.vlan);
|
|
if (!eth_type_set)
|
|
mnl_attr_put_u16(nlh, TCA_FLOWER_KEY_ETH_TYPE,
|
|
RTE_BE16(ETH_P_8021Q));
|
|
eth_type_set = 1;
|
|
vlan_present = 1;
|
|
if (mask.vlan == &flow_tcf_mask_empty.vlan)
|
|
break;
|
|
spec.vlan = items->spec;
|
|
if (mask.vlan->inner_type) {
|
|
mnl_attr_put_u16(nlh,
|
|
TCA_FLOWER_KEY_VLAN_ETH_TYPE,
|
|
spec.vlan->inner_type);
|
|
vlan_eth_type_set = 1;
|
|
}
|
|
if (mask.vlan->tci & RTE_BE16(0xe000))
|
|
mnl_attr_put_u8(nlh, TCA_FLOWER_KEY_VLAN_PRIO,
|
|
(rte_be_to_cpu_16
|
|
(spec.vlan->tci) >> 13) & 0x7);
|
|
if (mask.vlan->tci & RTE_BE16(0x0fff))
|
|
mnl_attr_put_u16(nlh, TCA_FLOWER_KEY_VLAN_ID,
|
|
rte_be_to_cpu_16
|
|
(spec.vlan->tci &
|
|
RTE_BE16(0x0fff)));
|
|
break;
|
|
case RTE_FLOW_ITEM_TYPE_IPV4:
|
|
item_flags |= MLX5_FLOW_LAYER_OUTER_L3_IPV4;
|
|
mask.ipv4 = flow_tcf_item_mask
|
|
(items, &rte_flow_item_ipv4_mask,
|
|
&flow_tcf_mask_supported.ipv4,
|
|
&flow_tcf_mask_empty.ipv4,
|
|
sizeof(flow_tcf_mask_supported.ipv4),
|
|
error);
|
|
assert(mask.ipv4);
|
|
if (!eth_type_set || !vlan_eth_type_set)
|
|
mnl_attr_put_u16(nlh,
|
|
vlan_present ?
|
|
TCA_FLOWER_KEY_VLAN_ETH_TYPE :
|
|
TCA_FLOWER_KEY_ETH_TYPE,
|
|
RTE_BE16(ETH_P_IP));
|
|
eth_type_set = 1;
|
|
vlan_eth_type_set = 1;
|
|
if (mask.ipv4 == &flow_tcf_mask_empty.ipv4)
|
|
break;
|
|
spec.ipv4 = items->spec;
|
|
if (mask.ipv4->hdr.next_proto_id) {
|
|
mnl_attr_put_u8(nlh, TCA_FLOWER_KEY_IP_PROTO,
|
|
spec.ipv4->hdr.next_proto_id);
|
|
ip_proto_set = 1;
|
|
}
|
|
if (mask.ipv4->hdr.src_addr) {
|
|
mnl_attr_put_u32(nlh, TCA_FLOWER_KEY_IPV4_SRC,
|
|
spec.ipv4->hdr.src_addr);
|
|
mnl_attr_put_u32(nlh,
|
|
TCA_FLOWER_KEY_IPV4_SRC_MASK,
|
|
mask.ipv4->hdr.src_addr);
|
|
}
|
|
if (mask.ipv4->hdr.dst_addr) {
|
|
mnl_attr_put_u32(nlh, TCA_FLOWER_KEY_IPV4_DST,
|
|
spec.ipv4->hdr.dst_addr);
|
|
mnl_attr_put_u32(nlh,
|
|
TCA_FLOWER_KEY_IPV4_DST_MASK,
|
|
mask.ipv4->hdr.dst_addr);
|
|
}
|
|
break;
|
|
case RTE_FLOW_ITEM_TYPE_IPV6:
|
|
item_flags |= MLX5_FLOW_LAYER_OUTER_L3_IPV6;
|
|
mask.ipv6 = flow_tcf_item_mask
|
|
(items, &rte_flow_item_ipv6_mask,
|
|
&flow_tcf_mask_supported.ipv6,
|
|
&flow_tcf_mask_empty.ipv6,
|
|
sizeof(flow_tcf_mask_supported.ipv6),
|
|
error);
|
|
assert(mask.ipv6);
|
|
if (!eth_type_set || !vlan_eth_type_set)
|
|
mnl_attr_put_u16(nlh,
|
|
vlan_present ?
|
|
TCA_FLOWER_KEY_VLAN_ETH_TYPE :
|
|
TCA_FLOWER_KEY_ETH_TYPE,
|
|
RTE_BE16(ETH_P_IPV6));
|
|
eth_type_set = 1;
|
|
vlan_eth_type_set = 1;
|
|
if (mask.ipv6 == &flow_tcf_mask_empty.ipv6)
|
|
break;
|
|
spec.ipv6 = items->spec;
|
|
if (mask.ipv6->hdr.proto) {
|
|
mnl_attr_put_u8(nlh, TCA_FLOWER_KEY_IP_PROTO,
|
|
spec.ipv6->hdr.proto);
|
|
ip_proto_set = 1;
|
|
}
|
|
if (!IN6_IS_ADDR_UNSPECIFIED(mask.ipv6->hdr.src_addr)) {
|
|
mnl_attr_put(nlh, TCA_FLOWER_KEY_IPV6_SRC,
|
|
sizeof(spec.ipv6->hdr.src_addr),
|
|
spec.ipv6->hdr.src_addr);
|
|
mnl_attr_put(nlh, TCA_FLOWER_KEY_IPV6_SRC_MASK,
|
|
sizeof(mask.ipv6->hdr.src_addr),
|
|
mask.ipv6->hdr.src_addr);
|
|
}
|
|
if (!IN6_IS_ADDR_UNSPECIFIED(mask.ipv6->hdr.dst_addr)) {
|
|
mnl_attr_put(nlh, TCA_FLOWER_KEY_IPV6_DST,
|
|
sizeof(spec.ipv6->hdr.dst_addr),
|
|
spec.ipv6->hdr.dst_addr);
|
|
mnl_attr_put(nlh, TCA_FLOWER_KEY_IPV6_DST_MASK,
|
|
sizeof(mask.ipv6->hdr.dst_addr),
|
|
mask.ipv6->hdr.dst_addr);
|
|
}
|
|
break;
|
|
case RTE_FLOW_ITEM_TYPE_UDP:
|
|
item_flags |= MLX5_FLOW_LAYER_OUTER_L4_UDP;
|
|
mask.udp = flow_tcf_item_mask
|
|
(items, &rte_flow_item_udp_mask,
|
|
&flow_tcf_mask_supported.udp,
|
|
&flow_tcf_mask_empty.udp,
|
|
sizeof(flow_tcf_mask_supported.udp),
|
|
error);
|
|
assert(mask.udp);
|
|
if (!ip_proto_set)
|
|
mnl_attr_put_u8(nlh, TCA_FLOWER_KEY_IP_PROTO,
|
|
IPPROTO_UDP);
|
|
if (mask.udp == &flow_tcf_mask_empty.udp)
|
|
break;
|
|
spec.udp = items->spec;
|
|
if (mask.udp->hdr.src_port) {
|
|
mnl_attr_put_u16(nlh, TCA_FLOWER_KEY_UDP_SRC,
|
|
spec.udp->hdr.src_port);
|
|
mnl_attr_put_u16(nlh,
|
|
TCA_FLOWER_KEY_UDP_SRC_MASK,
|
|
mask.udp->hdr.src_port);
|
|
}
|
|
if (mask.udp->hdr.dst_port) {
|
|
mnl_attr_put_u16(nlh, TCA_FLOWER_KEY_UDP_DST,
|
|
spec.udp->hdr.dst_port);
|
|
mnl_attr_put_u16(nlh,
|
|
TCA_FLOWER_KEY_UDP_DST_MASK,
|
|
mask.udp->hdr.dst_port);
|
|
}
|
|
break;
|
|
case RTE_FLOW_ITEM_TYPE_TCP:
|
|
item_flags |= MLX5_FLOW_LAYER_OUTER_L4_TCP;
|
|
mask.tcp = flow_tcf_item_mask
|
|
(items, &rte_flow_item_tcp_mask,
|
|
&flow_tcf_mask_supported.tcp,
|
|
&flow_tcf_mask_empty.tcp,
|
|
sizeof(flow_tcf_mask_supported.tcp),
|
|
error);
|
|
assert(mask.tcp);
|
|
if (!ip_proto_set)
|
|
mnl_attr_put_u8(nlh, TCA_FLOWER_KEY_IP_PROTO,
|
|
IPPROTO_TCP);
|
|
if (mask.tcp == &flow_tcf_mask_empty.tcp)
|
|
break;
|
|
spec.tcp = items->spec;
|
|
if (mask.tcp->hdr.src_port) {
|
|
mnl_attr_put_u16(nlh, TCA_FLOWER_KEY_TCP_SRC,
|
|
spec.tcp->hdr.src_port);
|
|
mnl_attr_put_u16(nlh,
|
|
TCA_FLOWER_KEY_TCP_SRC_MASK,
|
|
mask.tcp->hdr.src_port);
|
|
}
|
|
if (mask.tcp->hdr.dst_port) {
|
|
mnl_attr_put_u16(nlh, TCA_FLOWER_KEY_TCP_DST,
|
|
spec.tcp->hdr.dst_port);
|
|
mnl_attr_put_u16(nlh,
|
|
TCA_FLOWER_KEY_TCP_DST_MASK,
|
|
mask.tcp->hdr.dst_port);
|
|
}
|
|
if (mask.tcp->hdr.tcp_flags) {
|
|
mnl_attr_put_u16
|
|
(nlh,
|
|
TCA_FLOWER_KEY_TCP_FLAGS,
|
|
rte_cpu_to_be_16
|
|
(spec.tcp->hdr.tcp_flags));
|
|
mnl_attr_put_u16
|
|
(nlh,
|
|
TCA_FLOWER_KEY_TCP_FLAGS_MASK,
|
|
rte_cpu_to_be_16
|
|
(mask.tcp->hdr.tcp_flags));
|
|
}
|
|
break;
|
|
default:
|
|
return rte_flow_error_set(error, ENOTSUP,
|
|
RTE_FLOW_ERROR_TYPE_ITEM,
|
|
NULL, "item not supported");
|
|
}
|
|
}
|
|
na_flower_act = mnl_attr_nest_start(nlh, TCA_FLOWER_ACT);
|
|
na_act_index_cur = 1;
|
|
for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
|
|
struct nlattr *na_act_index;
|
|
struct nlattr *na_act;
|
|
unsigned int vlan_act;
|
|
unsigned int i;
|
|
|
|
switch (actions->type) {
|
|
case RTE_FLOW_ACTION_TYPE_VOID:
|
|
break;
|
|
case RTE_FLOW_ACTION_TYPE_PORT_ID:
|
|
conf.port_id = actions->conf;
|
|
if (conf.port_id->original)
|
|
i = 0;
|
|
else
|
|
for (i = 0; ptoi[i].ifindex; ++i)
|
|
if (ptoi[i].port_id == conf.port_id->id)
|
|
break;
|
|
assert(ptoi[i].ifindex);
|
|
na_act_index =
|
|
mnl_attr_nest_start(nlh, na_act_index_cur++);
|
|
assert(na_act_index);
|
|
mnl_attr_put_strz(nlh, TCA_ACT_KIND, "mirred");
|
|
na_act = mnl_attr_nest_start(nlh, TCA_ACT_OPTIONS);
|
|
assert(na_act);
|
|
mnl_attr_put(nlh, TCA_MIRRED_PARMS,
|
|
sizeof(struct tc_mirred),
|
|
&(struct tc_mirred){
|
|
.action = TC_ACT_STOLEN,
|
|
.eaction = TCA_EGRESS_REDIR,
|
|
.ifindex = ptoi[i].ifindex,
|
|
});
|
|
mnl_attr_nest_end(nlh, na_act);
|
|
mnl_attr_nest_end(nlh, na_act_index);
|
|
break;
|
|
case RTE_FLOW_ACTION_TYPE_DROP:
|
|
na_act_index =
|
|
mnl_attr_nest_start(nlh, na_act_index_cur++);
|
|
assert(na_act_index);
|
|
mnl_attr_put_strz(nlh, TCA_ACT_KIND, "gact");
|
|
na_act = mnl_attr_nest_start(nlh, TCA_ACT_OPTIONS);
|
|
assert(na_act);
|
|
mnl_attr_put(nlh, TCA_GACT_PARMS,
|
|
sizeof(struct tc_gact),
|
|
&(struct tc_gact){
|
|
.action = TC_ACT_SHOT,
|
|
});
|
|
mnl_attr_nest_end(nlh, na_act);
|
|
mnl_attr_nest_end(nlh, na_act_index);
|
|
break;
|
|
case RTE_FLOW_ACTION_TYPE_OF_POP_VLAN:
|
|
conf.of_push_vlan = NULL;
|
|
vlan_act = TCA_VLAN_ACT_POP;
|
|
goto action_of_vlan;
|
|
case RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN:
|
|
conf.of_push_vlan = actions->conf;
|
|
vlan_act = TCA_VLAN_ACT_PUSH;
|
|
goto action_of_vlan;
|
|
case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID:
|
|
conf.of_set_vlan_vid = actions->conf;
|
|
if (na_vlan_id)
|
|
goto override_na_vlan_id;
|
|
vlan_act = TCA_VLAN_ACT_MODIFY;
|
|
goto action_of_vlan;
|
|
case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP:
|
|
conf.of_set_vlan_pcp = actions->conf;
|
|
if (na_vlan_priority)
|
|
goto override_na_vlan_priority;
|
|
vlan_act = TCA_VLAN_ACT_MODIFY;
|
|
goto action_of_vlan;
|
|
action_of_vlan:
|
|
na_act_index =
|
|
mnl_attr_nest_start(nlh, na_act_index_cur++);
|
|
assert(na_act_index);
|
|
mnl_attr_put_strz(nlh, TCA_ACT_KIND, "vlan");
|
|
na_act = mnl_attr_nest_start(nlh, TCA_ACT_OPTIONS);
|
|
assert(na_act);
|
|
mnl_attr_put(nlh, TCA_VLAN_PARMS,
|
|
sizeof(struct tc_vlan),
|
|
&(struct tc_vlan){
|
|
.action = TC_ACT_PIPE,
|
|
.v_action = vlan_act,
|
|
});
|
|
if (vlan_act == TCA_VLAN_ACT_POP) {
|
|
mnl_attr_nest_end(nlh, na_act);
|
|
mnl_attr_nest_end(nlh, na_act_index);
|
|
break;
|
|
}
|
|
if (vlan_act == TCA_VLAN_ACT_PUSH)
|
|
mnl_attr_put_u16(nlh,
|
|
TCA_VLAN_PUSH_VLAN_PROTOCOL,
|
|
conf.of_push_vlan->ethertype);
|
|
na_vlan_id = mnl_nlmsg_get_payload_tail(nlh);
|
|
mnl_attr_put_u16(nlh, TCA_VLAN_PAD, 0);
|
|
na_vlan_priority = mnl_nlmsg_get_payload_tail(nlh);
|
|
mnl_attr_put_u8(nlh, TCA_VLAN_PAD, 0);
|
|
mnl_attr_nest_end(nlh, na_act);
|
|
mnl_attr_nest_end(nlh, na_act_index);
|
|
if (actions->type ==
|
|
RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_VID) {
|
|
override_na_vlan_id:
|
|
na_vlan_id->nla_type = TCA_VLAN_PUSH_VLAN_ID;
|
|
*(uint16_t *)mnl_attr_get_payload(na_vlan_id) =
|
|
rte_be_to_cpu_16
|
|
(conf.of_set_vlan_vid->vlan_vid);
|
|
} else if (actions->type ==
|
|
RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP) {
|
|
override_na_vlan_priority:
|
|
na_vlan_priority->nla_type =
|
|
TCA_VLAN_PUSH_VLAN_PRIORITY;
|
|
*(uint8_t *)mnl_attr_get_payload
|
|
(na_vlan_priority) =
|
|
conf.of_set_vlan_pcp->vlan_pcp;
|
|
}
|
|
break;
|
|
case RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC:
|
|
case RTE_FLOW_ACTION_TYPE_SET_IPV4_DST:
|
|
case RTE_FLOW_ACTION_TYPE_SET_IPV6_SRC:
|
|
case RTE_FLOW_ACTION_TYPE_SET_IPV6_DST:
|
|
case RTE_FLOW_ACTION_TYPE_SET_TP_SRC:
|
|
case RTE_FLOW_ACTION_TYPE_SET_TP_DST:
|
|
na_act_index =
|
|
mnl_attr_nest_start(nlh, na_act_index_cur++);
|
|
flow_tcf_create_pedit_mnl_msg(nlh,
|
|
&actions, item_flags);
|
|
mnl_attr_nest_end(nlh, na_act_index);
|
|
break;
|
|
default:
|
|
return rte_flow_error_set(error, ENOTSUP,
|
|
RTE_FLOW_ERROR_TYPE_ACTION,
|
|
actions,
|
|
"action not supported");
|
|
}
|
|
}
|
|
assert(na_flower);
|
|
assert(na_flower_act);
|
|
mnl_attr_nest_end(nlh, na_flower_act);
|
|
mnl_attr_nest_end(nlh, na_flower);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Send Netlink message with acknowledgment.
|
|
*
|
|
* @param nl
|
|
* Libmnl socket to use.
|
|
* @param nlh
|
|
* Message to send. This function always raises the NLM_F_ACK flag before
|
|
* sending.
|
|
*
|
|
* @return
|
|
* 0 on success, a negative errno value otherwise and rte_errno is set.
|
|
*/
|
|
static int
|
|
flow_tcf_nl_ack(struct mnl_socket *nl, struct nlmsghdr *nlh)
|
|
{
|
|
alignas(struct nlmsghdr)
|
|
uint8_t ans[mnl_nlmsg_size(sizeof(struct nlmsgerr)) +
|
|
nlh->nlmsg_len - sizeof(*nlh)];
|
|
uint32_t seq = random();
|
|
int ret;
|
|
|
|
nlh->nlmsg_flags |= NLM_F_ACK;
|
|
nlh->nlmsg_seq = seq;
|
|
ret = mnl_socket_sendto(nl, nlh, nlh->nlmsg_len);
|
|
if (ret != -1)
|
|
ret = mnl_socket_recvfrom(nl, ans, sizeof(ans));
|
|
if (ret != -1)
|
|
ret = mnl_cb_run
|
|
(ans, ret, seq, mnl_socket_get_portid(nl), NULL, NULL);
|
|
if (ret > 0)
|
|
return 0;
|
|
rte_errno = errno;
|
|
return -rte_errno;
|
|
}
|
|
|
|
/**
|
|
* Apply flow to E-Switch by sending Netlink message.
|
|
*
|
|
* @param[in] dev
|
|
* Pointer to Ethernet device.
|
|
* @param[in, out] flow
|
|
* Pointer to the sub flow.
|
|
* @param[out] error
|
|
* Pointer to the error structure.
|
|
*
|
|
* @return
|
|
* 0 on success, a negative errno value otherwise and rte_ernno is set.
|
|
*/
|
|
static int
|
|
flow_tcf_apply(struct rte_eth_dev *dev, struct rte_flow *flow,
|
|
struct rte_flow_error *error)
|
|
{
|
|
struct priv *priv = dev->data->dev_private;
|
|
struct mnl_socket *nl = priv->mnl_socket;
|
|
struct mlx5_flow *dev_flow;
|
|
struct nlmsghdr *nlh;
|
|
|
|
dev_flow = LIST_FIRST(&flow->dev_flows);
|
|
/* E-Switch flow can't be expanded. */
|
|
assert(!LIST_NEXT(dev_flow, next));
|
|
nlh = dev_flow->tcf.nlh;
|
|
nlh->nlmsg_type = RTM_NEWTFILTER;
|
|
nlh->nlmsg_flags = NLM_F_REQUEST | NLM_F_CREATE | NLM_F_EXCL;
|
|
if (!flow_tcf_nl_ack(nl, nlh))
|
|
return 0;
|
|
return rte_flow_error_set(error, rte_errno,
|
|
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
|
|
"netlink: failed to create TC flow rule");
|
|
}
|
|
|
|
/**
|
|
* Remove flow from E-Switch by sending Netlink message.
|
|
*
|
|
* @param[in] dev
|
|
* Pointer to Ethernet device.
|
|
* @param[in, out] flow
|
|
* Pointer to the sub flow.
|
|
*/
|
|
static void
|
|
flow_tcf_remove(struct rte_eth_dev *dev, struct rte_flow *flow)
|
|
{
|
|
struct priv *priv = dev->data->dev_private;
|
|
struct mnl_socket *nl = priv->mnl_socket;
|
|
struct mlx5_flow *dev_flow;
|
|
struct nlmsghdr *nlh;
|
|
|
|
if (!flow)
|
|
return;
|
|
dev_flow = LIST_FIRST(&flow->dev_flows);
|
|
if (!dev_flow)
|
|
return;
|
|
/* E-Switch flow can't be expanded. */
|
|
assert(!LIST_NEXT(dev_flow, next));
|
|
nlh = dev_flow->tcf.nlh;
|
|
nlh->nlmsg_type = RTM_DELTFILTER;
|
|
nlh->nlmsg_flags = NLM_F_REQUEST;
|
|
flow_tcf_nl_ack(nl, nlh);
|
|
}
|
|
|
|
/**
|
|
* Remove flow from E-Switch and release resources of the device flow.
|
|
*
|
|
* @param[in] dev
|
|
* Pointer to Ethernet device.
|
|
* @param[in, out] flow
|
|
* Pointer to the sub flow.
|
|
*/
|
|
static void
|
|
flow_tcf_destroy(struct rte_eth_dev *dev, struct rte_flow *flow)
|
|
{
|
|
struct mlx5_flow *dev_flow;
|
|
|
|
if (!flow)
|
|
return;
|
|
flow_tcf_remove(dev, flow);
|
|
dev_flow = LIST_FIRST(&flow->dev_flows);
|
|
if (!dev_flow)
|
|
return;
|
|
/* E-Switch flow can't be expanded. */
|
|
assert(!LIST_NEXT(dev_flow, next));
|
|
LIST_REMOVE(dev_flow, next);
|
|
rte_free(dev_flow);
|
|
}
|
|
|
|
const struct mlx5_flow_driver_ops mlx5_flow_tcf_drv_ops = {
|
|
.validate = flow_tcf_validate,
|
|
.prepare = flow_tcf_prepare,
|
|
.translate = flow_tcf_translate,
|
|
.apply = flow_tcf_apply,
|
|
.remove = flow_tcf_remove,
|
|
.destroy = flow_tcf_destroy,
|
|
};
|
|
|
|
/**
|
|
* Initialize ingress qdisc of a given network interface.
|
|
*
|
|
* @param nl
|
|
* Libmnl socket of the @p NETLINK_ROUTE kind.
|
|
* @param ifindex
|
|
* Index of network interface to initialize.
|
|
* @param[out] error
|
|
* Perform verbose error reporting if not NULL.
|
|
*
|
|
* @return
|
|
* 0 on success, a negative errno value otherwise and rte_errno is set.
|
|
*/
|
|
int
|
|
mlx5_flow_tcf_init(struct mnl_socket *nl, unsigned int ifindex,
|
|
struct rte_flow_error *error)
|
|
{
|
|
struct nlmsghdr *nlh;
|
|
struct tcmsg *tcm;
|
|
alignas(struct nlmsghdr)
|
|
uint8_t buf[mnl_nlmsg_size(sizeof(*tcm) + 128)];
|
|
|
|
/* Destroy existing ingress qdisc and everything attached to it. */
|
|
nlh = mnl_nlmsg_put_header(buf);
|
|
nlh->nlmsg_type = RTM_DELQDISC;
|
|
nlh->nlmsg_flags = NLM_F_REQUEST;
|
|
tcm = mnl_nlmsg_put_extra_header(nlh, sizeof(*tcm));
|
|
tcm->tcm_family = AF_UNSPEC;
|
|
tcm->tcm_ifindex = ifindex;
|
|
tcm->tcm_handle = TC_H_MAKE(TC_H_INGRESS, 0);
|
|
tcm->tcm_parent = TC_H_INGRESS;
|
|
/* Ignore errors when qdisc is already absent. */
|
|
if (flow_tcf_nl_ack(nl, nlh) &&
|
|
rte_errno != EINVAL && rte_errno != ENOENT)
|
|
return rte_flow_error_set(error, rte_errno,
|
|
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
|
|
"netlink: failed to remove ingress"
|
|
" qdisc");
|
|
/* Create fresh ingress qdisc. */
|
|
nlh = mnl_nlmsg_put_header(buf);
|
|
nlh->nlmsg_type = RTM_NEWQDISC;
|
|
nlh->nlmsg_flags = NLM_F_REQUEST | NLM_F_CREATE | NLM_F_EXCL;
|
|
tcm = mnl_nlmsg_put_extra_header(nlh, sizeof(*tcm));
|
|
tcm->tcm_family = AF_UNSPEC;
|
|
tcm->tcm_ifindex = ifindex;
|
|
tcm->tcm_handle = TC_H_MAKE(TC_H_INGRESS, 0);
|
|
tcm->tcm_parent = TC_H_INGRESS;
|
|
mnl_attr_put_strz_check(nlh, sizeof(buf), TCA_KIND, "ingress");
|
|
if (flow_tcf_nl_ack(nl, nlh))
|
|
return rte_flow_error_set(error, rte_errno,
|
|
RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
|
|
"netlink: failed to create ingress"
|
|
" qdisc");
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Create and configure a libmnl socket for Netlink flow rules.
|
|
*
|
|
* @return
|
|
* A valid libmnl socket object pointer on success, NULL otherwise and
|
|
* rte_errno is set.
|
|
*/
|
|
struct mnl_socket *
|
|
mlx5_flow_tcf_socket_create(void)
|
|
{
|
|
struct mnl_socket *nl = mnl_socket_open(NETLINK_ROUTE);
|
|
|
|
if (nl) {
|
|
mnl_socket_setsockopt(nl, NETLINK_CAP_ACK, &(int){ 1 },
|
|
sizeof(int));
|
|
if (!mnl_socket_bind(nl, 0, MNL_SOCKET_AUTOPID))
|
|
return nl;
|
|
}
|
|
rte_errno = errno;
|
|
if (nl)
|
|
mnl_socket_close(nl);
|
|
return NULL;
|
|
}
|
|
|
|
/**
|
|
* Destroy a libmnl socket.
|
|
*
|
|
* @param nl
|
|
* Libmnl socket of the @p NETLINK_ROUTE kind.
|
|
*/
|
|
void
|
|
mlx5_flow_tcf_socket_destroy(struct mnl_socket *nl)
|
|
{
|
|
mnl_socket_close(nl);
|
|
}
|