cd9ce8c373
Add support for compressed error vector available in cpl_rx_pkt for Chelsio T6. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
2252 lines
64 KiB
C
2252 lines
64 KiB
C
/*-
|
|
* BSD LICENSE
|
|
*
|
|
* Copyright(c) 2014-2015 Chelsio Communications.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* * Neither the name of Chelsio Communications nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/queue.h>
|
|
#include <stdio.h>
|
|
#include <errno.h>
|
|
#include <stdint.h>
|
|
#include <string.h>
|
|
#include <unistd.h>
|
|
#include <stdarg.h>
|
|
#include <inttypes.h>
|
|
#include <netinet/in.h>
|
|
|
|
#include <rte_byteorder.h>
|
|
#include <rte_common.h>
|
|
#include <rte_cycles.h>
|
|
#include <rte_interrupts.h>
|
|
#include <rte_log.h>
|
|
#include <rte_debug.h>
|
|
#include <rte_pci.h>
|
|
#include <rte_atomic.h>
|
|
#include <rte_branch_prediction.h>
|
|
#include <rte_memory.h>
|
|
#include <rte_memzone.h>
|
|
#include <rte_tailq.h>
|
|
#include <rte_eal.h>
|
|
#include <rte_alarm.h>
|
|
#include <rte_ether.h>
|
|
#include <rte_ethdev.h>
|
|
#include <rte_atomic.h>
|
|
#include <rte_malloc.h>
|
|
#include <rte_random.h>
|
|
#include <rte_dev.h>
|
|
|
|
#include "common.h"
|
|
#include "t4_regs.h"
|
|
#include "t4_msg.h"
|
|
#include "cxgbe.h"
|
|
|
|
static inline void ship_tx_pkt_coalesce_wr(struct adapter *adap,
|
|
struct sge_eth_txq *txq);
|
|
|
|
/*
|
|
* Max number of Rx buffers we replenish at a time.
|
|
*/
|
|
#define MAX_RX_REFILL 64U
|
|
|
|
#define NOMEM_TMR_IDX (SGE_NTIMERS - 1)
|
|
|
|
/*
|
|
* Max Tx descriptor space we allow for an Ethernet packet to be inlined
|
|
* into a WR.
|
|
*/
|
|
#define MAX_IMM_TX_PKT_LEN 256
|
|
|
|
/*
|
|
* Rx buffer sizes for "usembufs" Free List buffers (one ingress packet
|
|
* per mbuf buffer). We currently only support two sizes for 1500- and
|
|
* 9000-byte MTUs. We could easily support more but there doesn't seem to be
|
|
* much need for that ...
|
|
*/
|
|
#define FL_MTU_SMALL 1500
|
|
#define FL_MTU_LARGE 9000
|
|
|
|
static inline unsigned int fl_mtu_bufsize(struct adapter *adapter,
|
|
unsigned int mtu)
|
|
{
|
|
struct sge *s = &adapter->sge;
|
|
|
|
return CXGBE_ALIGN(s->pktshift + ETHER_HDR_LEN + VLAN_HLEN + mtu,
|
|
s->fl_align);
|
|
}
|
|
|
|
#define FL_MTU_SMALL_BUFSIZE(adapter) fl_mtu_bufsize(adapter, FL_MTU_SMALL)
|
|
#define FL_MTU_LARGE_BUFSIZE(adapter) fl_mtu_bufsize(adapter, FL_MTU_LARGE)
|
|
|
|
/*
|
|
* Bits 0..3 of rx_sw_desc.dma_addr have special meaning. The hardware uses
|
|
* these to specify the buffer size as an index into the SGE Free List Buffer
|
|
* Size register array. We also use bit 4, when the buffer has been unmapped
|
|
* for DMA, but this is of course never sent to the hardware and is only used
|
|
* to prevent double unmappings. All of the above requires that the Free List
|
|
* Buffers which we allocate have the bottom 5 bits free (0) -- i.e. are
|
|
* 32-byte or or a power of 2 greater in alignment. Since the SGE's minimal
|
|
* Free List Buffer alignment is 32 bytes, this works out for us ...
|
|
*/
|
|
enum {
|
|
RX_BUF_FLAGS = 0x1f, /* bottom five bits are special */
|
|
RX_BUF_SIZE = 0x0f, /* bottom three bits are for buf sizes */
|
|
RX_UNMAPPED_BUF = 0x10, /* buffer is not mapped */
|
|
|
|
/*
|
|
* XXX We shouldn't depend on being able to use these indices.
|
|
* XXX Especially when some other Master PF has initialized the
|
|
* XXX adapter or we use the Firmware Configuration File. We
|
|
* XXX should really search through the Host Buffer Size register
|
|
* XXX array for the appropriately sized buffer indices.
|
|
*/
|
|
RX_SMALL_PG_BUF = 0x0, /* small (PAGE_SIZE) page buffer */
|
|
RX_LARGE_PG_BUF = 0x1, /* buffer large page buffer */
|
|
|
|
RX_SMALL_MTU_BUF = 0x2, /* small MTU buffer */
|
|
RX_LARGE_MTU_BUF = 0x3, /* large MTU buffer */
|
|
};
|
|
|
|
/**
|
|
* txq_avail - return the number of available slots in a Tx queue
|
|
* @q: the Tx queue
|
|
*
|
|
* Returns the number of descriptors in a Tx queue available to write new
|
|
* packets.
|
|
*/
|
|
static inline unsigned int txq_avail(const struct sge_txq *q)
|
|
{
|
|
return q->size - 1 - q->in_use;
|
|
}
|
|
|
|
static int map_mbuf(struct rte_mbuf *mbuf, dma_addr_t *addr)
|
|
{
|
|
struct rte_mbuf *m = mbuf;
|
|
|
|
for (; m; m = m->next, addr++) {
|
|
*addr = m->buf_physaddr + rte_pktmbuf_headroom(m);
|
|
if (*addr == 0)
|
|
goto out_err;
|
|
}
|
|
return 0;
|
|
|
|
out_err:
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/**
|
|
* free_tx_desc - reclaims Tx descriptors and their buffers
|
|
* @q: the Tx queue to reclaim descriptors from
|
|
* @n: the number of descriptors to reclaim
|
|
*
|
|
* Reclaims Tx descriptors from an SGE Tx queue and frees the associated
|
|
* Tx buffers. Called with the Tx queue lock held.
|
|
*/
|
|
static void free_tx_desc(struct sge_txq *q, unsigned int n)
|
|
{
|
|
struct tx_sw_desc *d;
|
|
unsigned int cidx = 0;
|
|
|
|
d = &q->sdesc[cidx];
|
|
while (n--) {
|
|
if (d->mbuf) { /* an SGL is present */
|
|
rte_pktmbuf_free(d->mbuf);
|
|
d->mbuf = NULL;
|
|
}
|
|
if (d->coalesce.idx) {
|
|
int i;
|
|
|
|
for (i = 0; i < d->coalesce.idx; i++) {
|
|
rte_pktmbuf_free(d->coalesce.mbuf[i]);
|
|
d->coalesce.mbuf[i] = NULL;
|
|
}
|
|
d->coalesce.idx = 0;
|
|
}
|
|
++d;
|
|
if (++cidx == q->size) {
|
|
cidx = 0;
|
|
d = q->sdesc;
|
|
}
|
|
RTE_MBUF_PREFETCH_TO_FREE(&q->sdesc->mbuf->pool);
|
|
}
|
|
}
|
|
|
|
static void reclaim_tx_desc(struct sge_txq *q, unsigned int n)
|
|
{
|
|
struct tx_sw_desc *d;
|
|
unsigned int cidx = q->cidx;
|
|
|
|
d = &q->sdesc[cidx];
|
|
while (n--) {
|
|
if (d->mbuf) { /* an SGL is present */
|
|
rte_pktmbuf_free(d->mbuf);
|
|
d->mbuf = NULL;
|
|
}
|
|
++d;
|
|
if (++cidx == q->size) {
|
|
cidx = 0;
|
|
d = q->sdesc;
|
|
}
|
|
}
|
|
q->cidx = cidx;
|
|
}
|
|
|
|
/**
|
|
* fl_cap - return the capacity of a free-buffer list
|
|
* @fl: the FL
|
|
*
|
|
* Returns the capacity of a free-buffer list. The capacity is less than
|
|
* the size because one descriptor needs to be left unpopulated, otherwise
|
|
* HW will think the FL is empty.
|
|
*/
|
|
static inline unsigned int fl_cap(const struct sge_fl *fl)
|
|
{
|
|
return fl->size - 8; /* 1 descriptor = 8 buffers */
|
|
}
|
|
|
|
/**
|
|
* fl_starving - return whether a Free List is starving.
|
|
* @adapter: pointer to the adapter
|
|
* @fl: the Free List
|
|
*
|
|
* Tests specified Free List to see whether the number of buffers
|
|
* available to the hardware has falled below our "starvation"
|
|
* threshold.
|
|
*/
|
|
static inline bool fl_starving(const struct adapter *adapter,
|
|
const struct sge_fl *fl)
|
|
{
|
|
const struct sge *s = &adapter->sge;
|
|
|
|
return fl->avail - fl->pend_cred <= s->fl_starve_thres;
|
|
}
|
|
|
|
static inline unsigned int get_buf_size(struct adapter *adapter,
|
|
const struct rx_sw_desc *d)
|
|
{
|
|
unsigned int rx_buf_size_idx = d->dma_addr & RX_BUF_SIZE;
|
|
unsigned int buf_size = 0;
|
|
|
|
switch (rx_buf_size_idx) {
|
|
case RX_SMALL_MTU_BUF:
|
|
buf_size = FL_MTU_SMALL_BUFSIZE(adapter);
|
|
break;
|
|
|
|
case RX_LARGE_MTU_BUF:
|
|
buf_size = FL_MTU_LARGE_BUFSIZE(adapter);
|
|
break;
|
|
|
|
default:
|
|
BUG_ON(1);
|
|
/* NOT REACHED */
|
|
}
|
|
|
|
return buf_size;
|
|
}
|
|
|
|
/**
|
|
* free_rx_bufs - free the Rx buffers on an SGE free list
|
|
* @q: the SGE free list to free buffers from
|
|
* @n: how many buffers to free
|
|
*
|
|
* Release the next @n buffers on an SGE free-buffer Rx queue. The
|
|
* buffers must be made inaccessible to HW before calling this function.
|
|
*/
|
|
static void free_rx_bufs(struct sge_fl *q, int n)
|
|
{
|
|
unsigned int cidx = q->cidx;
|
|
struct rx_sw_desc *d;
|
|
|
|
d = &q->sdesc[cidx];
|
|
while (n--) {
|
|
if (d->buf) {
|
|
rte_pktmbuf_free(d->buf);
|
|
d->buf = NULL;
|
|
}
|
|
++d;
|
|
if (++cidx == q->size) {
|
|
cidx = 0;
|
|
d = q->sdesc;
|
|
}
|
|
q->avail--;
|
|
}
|
|
q->cidx = cidx;
|
|
}
|
|
|
|
/**
|
|
* unmap_rx_buf - unmap the current Rx buffer on an SGE free list
|
|
* @q: the SGE free list
|
|
*
|
|
* Unmap the current buffer on an SGE free-buffer Rx queue. The
|
|
* buffer must be made inaccessible to HW before calling this function.
|
|
*
|
|
* This is similar to @free_rx_bufs above but does not free the buffer.
|
|
* Do note that the FL still loses any further access to the buffer.
|
|
*/
|
|
static void unmap_rx_buf(struct sge_fl *q)
|
|
{
|
|
if (++q->cidx == q->size)
|
|
q->cidx = 0;
|
|
q->avail--;
|
|
}
|
|
|
|
static inline void ring_fl_db(struct adapter *adap, struct sge_fl *q)
|
|
{
|
|
if (q->pend_cred >= 64) {
|
|
u32 val = adap->params.arch.sge_fl_db;
|
|
|
|
if (is_t4(adap->params.chip))
|
|
val |= V_PIDX(q->pend_cred / 8);
|
|
else
|
|
val |= V_PIDX_T5(q->pend_cred / 8);
|
|
|
|
/*
|
|
* Make sure all memory writes to the Free List queue are
|
|
* committed before we tell the hardware about them.
|
|
*/
|
|
wmb();
|
|
|
|
/*
|
|
* If we don't have access to the new User Doorbell (T5+), use
|
|
* the old doorbell mechanism; otherwise use the new BAR2
|
|
* mechanism.
|
|
*/
|
|
if (unlikely(!q->bar2_addr)) {
|
|
t4_write_reg_relaxed(adap, MYPF_REG(A_SGE_PF_KDOORBELL),
|
|
val | V_QID(q->cntxt_id));
|
|
} else {
|
|
writel_relaxed(val | V_QID(q->bar2_qid),
|
|
(void *)((uintptr_t)q->bar2_addr +
|
|
SGE_UDB_KDOORBELL));
|
|
|
|
/*
|
|
* This Write memory Barrier will force the write to
|
|
* the User Doorbell area to be flushed.
|
|
*/
|
|
wmb();
|
|
}
|
|
q->pend_cred &= 7;
|
|
}
|
|
}
|
|
|
|
static inline void set_rx_sw_desc(struct rx_sw_desc *sd, void *buf,
|
|
dma_addr_t mapping)
|
|
{
|
|
sd->buf = buf;
|
|
sd->dma_addr = mapping; /* includes size low bits */
|
|
}
|
|
|
|
/**
|
|
* refill_fl_usembufs - refill an SGE Rx buffer ring with mbufs
|
|
* @adap: the adapter
|
|
* @q: the ring to refill
|
|
* @n: the number of new buffers to allocate
|
|
*
|
|
* (Re)populate an SGE free-buffer queue with up to @n new packet buffers,
|
|
* allocated with the supplied gfp flags. The caller must assure that
|
|
* @n does not exceed the queue's capacity. If afterwards the queue is
|
|
* found critically low mark it as starving in the bitmap of starving FLs.
|
|
*
|
|
* Returns the number of buffers allocated.
|
|
*/
|
|
static unsigned int refill_fl_usembufs(struct adapter *adap, struct sge_fl *q,
|
|
int n)
|
|
{
|
|
struct sge_eth_rxq *rxq = container_of(q, struct sge_eth_rxq, fl);
|
|
unsigned int cred = q->avail;
|
|
__be64 *d = &q->desc[q->pidx];
|
|
struct rx_sw_desc *sd = &q->sdesc[q->pidx];
|
|
unsigned int buf_size_idx = RX_SMALL_MTU_BUF;
|
|
struct rte_mbuf *buf_bulk[n];
|
|
int ret, i;
|
|
struct rte_pktmbuf_pool_private *mbp_priv;
|
|
u8 jumbo_en = rxq->rspq.eth_dev->data->dev_conf.rxmode.jumbo_frame;
|
|
|
|
/* Use jumbo mtu buffers iff mbuf data room size can fit jumbo data. */
|
|
mbp_priv = rte_mempool_get_priv(rxq->rspq.mb_pool);
|
|
if (jumbo_en &&
|
|
((mbp_priv->mbuf_data_room_size - RTE_PKTMBUF_HEADROOM) >= 9000))
|
|
buf_size_idx = RX_LARGE_MTU_BUF;
|
|
|
|
ret = rte_mempool_get_bulk(rxq->rspq.mb_pool, (void *)buf_bulk, n);
|
|
if (unlikely(ret != 0)) {
|
|
dev_debug(adap, "%s: failed to allocated fl entries in bulk ..\n",
|
|
__func__);
|
|
q->alloc_failed++;
|
|
rxq->rspq.eth_dev->data->rx_mbuf_alloc_failed++;
|
|
goto out;
|
|
}
|
|
|
|
for (i = 0; i < n; i++) {
|
|
struct rte_mbuf *mbuf = buf_bulk[i];
|
|
dma_addr_t mapping;
|
|
|
|
if (!mbuf) {
|
|
dev_debug(adap, "%s: mbuf alloc failed\n", __func__);
|
|
q->alloc_failed++;
|
|
rxq->rspq.eth_dev->data->rx_mbuf_alloc_failed++;
|
|
goto out;
|
|
}
|
|
|
|
rte_mbuf_refcnt_set(mbuf, 1);
|
|
mbuf->data_off = RTE_PKTMBUF_HEADROOM;
|
|
mbuf->next = NULL;
|
|
mbuf->nb_segs = 1;
|
|
mbuf->port = rxq->rspq.port_id;
|
|
|
|
mapping = (dma_addr_t)RTE_ALIGN(mbuf->buf_physaddr +
|
|
mbuf->data_off,
|
|
adap->sge.fl_align);
|
|
mapping |= buf_size_idx;
|
|
*d++ = cpu_to_be64(mapping);
|
|
set_rx_sw_desc(sd, mbuf, mapping);
|
|
sd++;
|
|
|
|
q->avail++;
|
|
if (++q->pidx == q->size) {
|
|
q->pidx = 0;
|
|
sd = q->sdesc;
|
|
d = q->desc;
|
|
}
|
|
}
|
|
|
|
out: cred = q->avail - cred;
|
|
q->pend_cred += cred;
|
|
ring_fl_db(adap, q);
|
|
|
|
if (unlikely(fl_starving(adap, q))) {
|
|
/*
|
|
* Make sure data has been written to free list
|
|
*/
|
|
wmb();
|
|
q->low++;
|
|
}
|
|
|
|
return cred;
|
|
}
|
|
|
|
/**
|
|
* refill_fl - refill an SGE Rx buffer ring with mbufs
|
|
* @adap: the adapter
|
|
* @q: the ring to refill
|
|
* @n: the number of new buffers to allocate
|
|
*
|
|
* (Re)populate an SGE free-buffer queue with up to @n new packet buffers,
|
|
* allocated with the supplied gfp flags. The caller must assure that
|
|
* @n does not exceed the queue's capacity. Returns the number of buffers
|
|
* allocated.
|
|
*/
|
|
static unsigned int refill_fl(struct adapter *adap, struct sge_fl *q, int n)
|
|
{
|
|
return refill_fl_usembufs(adap, q, n);
|
|
}
|
|
|
|
static inline void __refill_fl(struct adapter *adap, struct sge_fl *fl)
|
|
{
|
|
refill_fl(adap, fl, min(MAX_RX_REFILL, fl_cap(fl) - fl->avail));
|
|
}
|
|
|
|
/*
|
|
* Return the number of reclaimable descriptors in a Tx queue.
|
|
*/
|
|
static inline int reclaimable(const struct sge_txq *q)
|
|
{
|
|
int hw_cidx = ntohs(q->stat->cidx);
|
|
|
|
hw_cidx -= q->cidx;
|
|
if (hw_cidx < 0)
|
|
return hw_cidx + q->size;
|
|
return hw_cidx;
|
|
}
|
|
|
|
/**
|
|
* reclaim_completed_tx - reclaims completed Tx descriptors
|
|
* @q: the Tx queue to reclaim completed descriptors from
|
|
*
|
|
* Reclaims Tx descriptors that the SGE has indicated it has processed.
|
|
*/
|
|
void reclaim_completed_tx(struct sge_txq *q)
|
|
{
|
|
unsigned int avail = reclaimable(q);
|
|
|
|
do {
|
|
/* reclaim as much as possible */
|
|
reclaim_tx_desc(q, avail);
|
|
q->in_use -= avail;
|
|
avail = reclaimable(q);
|
|
} while (avail);
|
|
}
|
|
|
|
/**
|
|
* sgl_len - calculates the size of an SGL of the given capacity
|
|
* @n: the number of SGL entries
|
|
*
|
|
* Calculates the number of flits needed for a scatter/gather list that
|
|
* can hold the given number of entries.
|
|
*/
|
|
static inline unsigned int sgl_len(unsigned int n)
|
|
{
|
|
/*
|
|
* A Direct Scatter Gather List uses 32-bit lengths and 64-bit PCI DMA
|
|
* addresses. The DSGL Work Request starts off with a 32-bit DSGL
|
|
* ULPTX header, then Length0, then Address0, then, for 1 <= i <= N,
|
|
* repeated sequences of { Length[i], Length[i+1], Address[i],
|
|
* Address[i+1] } (this ensures that all addresses are on 64-bit
|
|
* boundaries). If N is even, then Length[N+1] should be set to 0 and
|
|
* Address[N+1] is omitted.
|
|
*
|
|
* The following calculation incorporates all of the above. It's
|
|
* somewhat hard to follow but, briefly: the "+2" accounts for the
|
|
* first two flits which include the DSGL header, Length0 and
|
|
* Address0; the "(3*(n-1))/2" covers the main body of list entries (3
|
|
* flits for every pair of the remaining N) +1 if (n-1) is odd; and
|
|
* finally the "+((n-1)&1)" adds the one remaining flit needed if
|
|
* (n-1) is odd ...
|
|
*/
|
|
n--;
|
|
return (3 * n) / 2 + (n & 1) + 2;
|
|
}
|
|
|
|
/**
|
|
* flits_to_desc - returns the num of Tx descriptors for the given flits
|
|
* @n: the number of flits
|
|
*
|
|
* Returns the number of Tx descriptors needed for the supplied number
|
|
* of flits.
|
|
*/
|
|
static inline unsigned int flits_to_desc(unsigned int n)
|
|
{
|
|
return DIV_ROUND_UP(n, 8);
|
|
}
|
|
|
|
/**
|
|
* is_eth_imm - can an Ethernet packet be sent as immediate data?
|
|
* @m: the packet
|
|
*
|
|
* Returns whether an Ethernet packet is small enough to fit as
|
|
* immediate data. Return value corresponds to the headroom required.
|
|
*/
|
|
static inline int is_eth_imm(const struct rte_mbuf *m)
|
|
{
|
|
unsigned int hdrlen = (m->ol_flags & PKT_TX_TCP_SEG) ?
|
|
sizeof(struct cpl_tx_pkt_lso_core) : 0;
|
|
|
|
hdrlen += sizeof(struct cpl_tx_pkt);
|
|
if (m->pkt_len <= MAX_IMM_TX_PKT_LEN - hdrlen)
|
|
return hdrlen;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* calc_tx_flits - calculate the number of flits for a packet Tx WR
|
|
* @m: the packet
|
|
*
|
|
* Returns the number of flits needed for a Tx WR for the given Ethernet
|
|
* packet, including the needed WR and CPL headers.
|
|
*/
|
|
static inline unsigned int calc_tx_flits(const struct rte_mbuf *m)
|
|
{
|
|
unsigned int flits;
|
|
int hdrlen;
|
|
|
|
/*
|
|
* If the mbuf is small enough, we can pump it out as a work request
|
|
* with only immediate data. In that case we just have to have the
|
|
* TX Packet header plus the mbuf data in the Work Request.
|
|
*/
|
|
|
|
hdrlen = is_eth_imm(m);
|
|
if (hdrlen)
|
|
return DIV_ROUND_UP(m->pkt_len + hdrlen, sizeof(__be64));
|
|
|
|
/*
|
|
* Otherwise, we're going to have to construct a Scatter gather list
|
|
* of the mbuf body and fragments. We also include the flits necessary
|
|
* for the TX Packet Work Request and CPL. We always have a firmware
|
|
* Write Header (incorporated as part of the cpl_tx_pkt_lso and
|
|
* cpl_tx_pkt structures), followed by either a TX Packet Write CPL
|
|
* message or, if we're doing a Large Send Offload, an LSO CPL message
|
|
* with an embeded TX Packet Write CPL message.
|
|
*/
|
|
flits = sgl_len(m->nb_segs);
|
|
if (m->tso_segsz)
|
|
flits += (sizeof(struct fw_eth_tx_pkt_wr) +
|
|
sizeof(struct cpl_tx_pkt_lso_core) +
|
|
sizeof(struct cpl_tx_pkt_core)) / sizeof(__be64);
|
|
else
|
|
flits += (sizeof(struct fw_eth_tx_pkt_wr) +
|
|
sizeof(struct cpl_tx_pkt_core)) / sizeof(__be64);
|
|
return flits;
|
|
}
|
|
|
|
/**
|
|
* write_sgl - populate a scatter/gather list for a packet
|
|
* @mbuf: the packet
|
|
* @q: the Tx queue we are writing into
|
|
* @sgl: starting location for writing the SGL
|
|
* @end: points right after the end of the SGL
|
|
* @start: start offset into mbuf main-body data to include in the SGL
|
|
* @addr: address of mapped region
|
|
*
|
|
* Generates a scatter/gather list for the buffers that make up a packet.
|
|
* The caller must provide adequate space for the SGL that will be written.
|
|
* The SGL includes all of the packet's page fragments and the data in its
|
|
* main body except for the first @start bytes. @sgl must be 16-byte
|
|
* aligned and within a Tx descriptor with available space. @end points
|
|
* write after the end of the SGL but does not account for any potential
|
|
* wrap around, i.e., @end > @sgl.
|
|
*/
|
|
static void write_sgl(struct rte_mbuf *mbuf, struct sge_txq *q,
|
|
struct ulptx_sgl *sgl, u64 *end, unsigned int start,
|
|
const dma_addr_t *addr)
|
|
{
|
|
unsigned int i, len;
|
|
struct ulptx_sge_pair *to;
|
|
struct rte_mbuf *m = mbuf;
|
|
unsigned int nfrags = m->nb_segs;
|
|
struct ulptx_sge_pair buf[nfrags / 2];
|
|
|
|
len = m->data_len - start;
|
|
sgl->len0 = htonl(len);
|
|
sgl->addr0 = rte_cpu_to_be_64(addr[0]);
|
|
|
|
sgl->cmd_nsge = htonl(V_ULPTX_CMD(ULP_TX_SC_DSGL) |
|
|
V_ULPTX_NSGE(nfrags));
|
|
if (likely(--nfrags == 0))
|
|
return;
|
|
/*
|
|
* Most of the complexity below deals with the possibility we hit the
|
|
* end of the queue in the middle of writing the SGL. For this case
|
|
* only we create the SGL in a temporary buffer and then copy it.
|
|
*/
|
|
to = (u8 *)end > (u8 *)q->stat ? buf : sgl->sge;
|
|
|
|
for (i = 0; nfrags >= 2; nfrags -= 2, to++) {
|
|
m = m->next;
|
|
to->len[0] = rte_cpu_to_be_32(m->data_len);
|
|
to->addr[0] = rte_cpu_to_be_64(addr[++i]);
|
|
m = m->next;
|
|
to->len[1] = rte_cpu_to_be_32(m->data_len);
|
|
to->addr[1] = rte_cpu_to_be_64(addr[++i]);
|
|
}
|
|
if (nfrags) {
|
|
m = m->next;
|
|
to->len[0] = rte_cpu_to_be_32(m->data_len);
|
|
to->len[1] = rte_cpu_to_be_32(0);
|
|
to->addr[0] = rte_cpu_to_be_64(addr[i + 1]);
|
|
}
|
|
if (unlikely((u8 *)end > (u8 *)q->stat)) {
|
|
unsigned int part0 = RTE_PTR_DIFF((u8 *)q->stat,
|
|
(u8 *)sgl->sge);
|
|
unsigned int part1;
|
|
|
|
if (likely(part0))
|
|
memcpy(sgl->sge, buf, part0);
|
|
part1 = RTE_PTR_DIFF((u8 *)end, (u8 *)q->stat);
|
|
rte_memcpy(q->desc, RTE_PTR_ADD((u8 *)buf, part0), part1);
|
|
end = RTE_PTR_ADD((void *)q->desc, part1);
|
|
}
|
|
if ((uintptr_t)end & 8) /* 0-pad to multiple of 16 */
|
|
*(u64 *)end = 0;
|
|
}
|
|
|
|
#define IDXDIFF(head, tail, wrap) \
|
|
((head) >= (tail) ? (head) - (tail) : (wrap) - (tail) + (head))
|
|
|
|
#define Q_IDXDIFF(q, idx) IDXDIFF((q)->pidx, (q)->idx, (q)->size)
|
|
#define R_IDXDIFF(q, idx) IDXDIFF((q)->cidx, (q)->idx, (q)->size)
|
|
|
|
/**
|
|
* ring_tx_db - ring a Tx queue's doorbell
|
|
* @adap: the adapter
|
|
* @q: the Tx queue
|
|
* @n: number of new descriptors to give to HW
|
|
*
|
|
* Ring the doorbel for a Tx queue.
|
|
*/
|
|
static inline void ring_tx_db(struct adapter *adap, struct sge_txq *q)
|
|
{
|
|
int n = Q_IDXDIFF(q, dbidx);
|
|
|
|
/*
|
|
* Make sure that all writes to the TX Descriptors are committed
|
|
* before we tell the hardware about them.
|
|
*/
|
|
rte_wmb();
|
|
|
|
/*
|
|
* If we don't have access to the new User Doorbell (T5+), use the old
|
|
* doorbell mechanism; otherwise use the new BAR2 mechanism.
|
|
*/
|
|
if (unlikely(!q->bar2_addr)) {
|
|
u32 val = V_PIDX(n);
|
|
|
|
/*
|
|
* For T4 we need to participate in the Doorbell Recovery
|
|
* mechanism.
|
|
*/
|
|
if (!q->db_disabled)
|
|
t4_write_reg(adap, MYPF_REG(A_SGE_PF_KDOORBELL),
|
|
V_QID(q->cntxt_id) | val);
|
|
else
|
|
q->db_pidx_inc += n;
|
|
q->db_pidx = q->pidx;
|
|
} else {
|
|
u32 val = V_PIDX_T5(n);
|
|
|
|
/*
|
|
* T4 and later chips share the same PIDX field offset within
|
|
* the doorbell, but T5 and later shrank the field in order to
|
|
* gain a bit for Doorbell Priority. The field was absurdly
|
|
* large in the first place (14 bits) so we just use the T5
|
|
* and later limits and warn if a Queue ID is too large.
|
|
*/
|
|
WARN_ON(val & F_DBPRIO);
|
|
|
|
writel(val | V_QID(q->bar2_qid),
|
|
(void *)((uintptr_t)q->bar2_addr + SGE_UDB_KDOORBELL));
|
|
|
|
/*
|
|
* This Write Memory Barrier will force the write to the User
|
|
* Doorbell area to be flushed. This is needed to prevent
|
|
* writes on different CPUs for the same queue from hitting
|
|
* the adapter out of order. This is required when some Work
|
|
* Requests take the Write Combine Gather Buffer path (user
|
|
* doorbell area offset [SGE_UDB_WCDOORBELL..+63]) and some
|
|
* take the traditional path where we simply increment the
|
|
* PIDX (User Doorbell area SGE_UDB_KDOORBELL) and have the
|
|
* hardware DMA read the actual Work Request.
|
|
*/
|
|
rte_wmb();
|
|
}
|
|
q->dbidx = q->pidx;
|
|
}
|
|
|
|
/*
|
|
* Figure out what HW csum a packet wants and return the appropriate control
|
|
* bits.
|
|
*/
|
|
static u64 hwcsum(enum chip_type chip, const struct rte_mbuf *m)
|
|
{
|
|
int csum_type;
|
|
|
|
if (m->ol_flags & PKT_TX_IP_CKSUM) {
|
|
switch (m->ol_flags & PKT_TX_L4_MASK) {
|
|
case PKT_TX_TCP_CKSUM:
|
|
csum_type = TX_CSUM_TCPIP;
|
|
break;
|
|
case PKT_TX_UDP_CKSUM:
|
|
csum_type = TX_CSUM_UDPIP;
|
|
break;
|
|
default:
|
|
goto nocsum;
|
|
}
|
|
} else {
|
|
goto nocsum;
|
|
}
|
|
|
|
if (likely(csum_type >= TX_CSUM_TCPIP)) {
|
|
u64 hdr_len = V_TXPKT_IPHDR_LEN(m->l3_len);
|
|
int eth_hdr_len = m->l2_len;
|
|
|
|
if (CHELSIO_CHIP_VERSION(chip) <= CHELSIO_T5)
|
|
hdr_len |= V_TXPKT_ETHHDR_LEN(eth_hdr_len);
|
|
else
|
|
hdr_len |= V_T6_TXPKT_ETHHDR_LEN(eth_hdr_len);
|
|
return V_TXPKT_CSUM_TYPE(csum_type) | hdr_len;
|
|
}
|
|
nocsum:
|
|
/*
|
|
* unknown protocol, disable HW csum
|
|
* and hope a bad packet is detected
|
|
*/
|
|
return F_TXPKT_L4CSUM_DIS;
|
|
}
|
|
|
|
static inline void txq_advance(struct sge_txq *q, unsigned int n)
|
|
{
|
|
q->in_use += n;
|
|
q->pidx += n;
|
|
if (q->pidx >= q->size)
|
|
q->pidx -= q->size;
|
|
}
|
|
|
|
#define MAX_COALESCE_LEN 64000
|
|
|
|
static inline int wraps_around(struct sge_txq *q, int ndesc)
|
|
{
|
|
return (q->pidx + ndesc) > q->size ? 1 : 0;
|
|
}
|
|
|
|
static void tx_timer_cb(void *data)
|
|
{
|
|
struct adapter *adap = (struct adapter *)data;
|
|
struct sge_eth_txq *txq = &adap->sge.ethtxq[0];
|
|
int i;
|
|
unsigned int coal_idx;
|
|
|
|
/* monitor any pending tx */
|
|
for (i = 0; i < adap->sge.max_ethqsets; i++, txq++) {
|
|
if (t4_os_trylock(&txq->txq_lock)) {
|
|
coal_idx = txq->q.coalesce.idx;
|
|
if (coal_idx) {
|
|
if (coal_idx == txq->q.last_coal_idx &&
|
|
txq->q.pidx == txq->q.last_pidx) {
|
|
ship_tx_pkt_coalesce_wr(adap, txq);
|
|
} else {
|
|
txq->q.last_coal_idx = coal_idx;
|
|
txq->q.last_pidx = txq->q.pidx;
|
|
}
|
|
}
|
|
t4_os_unlock(&txq->txq_lock);
|
|
}
|
|
}
|
|
rte_eal_alarm_set(50, tx_timer_cb, (void *)adap);
|
|
}
|
|
|
|
/**
|
|
* ship_tx_pkt_coalesce_wr - finalizes and ships a coalesce WR
|
|
* @ adap: adapter structure
|
|
* @txq: tx queue
|
|
*
|
|
* writes the different fields of the pkts WR and sends it.
|
|
*/
|
|
static inline void ship_tx_pkt_coalesce_wr(struct adapter *adap,
|
|
struct sge_eth_txq *txq)
|
|
{
|
|
u32 wr_mid;
|
|
struct sge_txq *q = &txq->q;
|
|
struct fw_eth_tx_pkts_wr *wr;
|
|
unsigned int ndesc;
|
|
|
|
/* fill the pkts WR header */
|
|
wr = (void *)&q->desc[q->pidx];
|
|
wr->op_pkd = htonl(V_FW_WR_OP(FW_ETH_TX_PKTS_WR));
|
|
|
|
wr_mid = V_FW_WR_LEN16(DIV_ROUND_UP(q->coalesce.flits, 2));
|
|
ndesc = flits_to_desc(q->coalesce.flits);
|
|
wr->equiq_to_len16 = htonl(wr_mid);
|
|
wr->plen = cpu_to_be16(q->coalesce.len);
|
|
wr->npkt = q->coalesce.idx;
|
|
wr->r3 = 0;
|
|
wr->type = q->coalesce.type;
|
|
|
|
/* zero out coalesce structure members */
|
|
q->coalesce.idx = 0;
|
|
q->coalesce.flits = 0;
|
|
q->coalesce.len = 0;
|
|
|
|
txq_advance(q, ndesc);
|
|
txq->stats.coal_wr++;
|
|
txq->stats.coal_pkts += wr->npkt;
|
|
|
|
if (Q_IDXDIFF(q, equeidx) >= q->size / 2) {
|
|
q->equeidx = q->pidx;
|
|
wr_mid |= F_FW_WR_EQUEQ;
|
|
wr->equiq_to_len16 = htonl(wr_mid);
|
|
}
|
|
ring_tx_db(adap, q);
|
|
}
|
|
|
|
/**
|
|
* should_tx_packet_coalesce - decides wether to coalesce an mbuf or not
|
|
* @txq: tx queue where the mbuf is sent
|
|
* @mbuf: mbuf to be sent
|
|
* @nflits: return value for number of flits needed
|
|
* @adap: adapter structure
|
|
*
|
|
* This function decides if a packet should be coalesced or not.
|
|
*/
|
|
static inline int should_tx_packet_coalesce(struct sge_eth_txq *txq,
|
|
struct rte_mbuf *mbuf,
|
|
unsigned int *nflits,
|
|
struct adapter *adap)
|
|
{
|
|
struct sge_txq *q = &txq->q;
|
|
unsigned int flits, ndesc;
|
|
unsigned char type = 0;
|
|
int credits;
|
|
|
|
/* use coal WR type 1 when no frags are present */
|
|
type = (mbuf->nb_segs == 1) ? 1 : 0;
|
|
|
|
if (unlikely(type != q->coalesce.type && q->coalesce.idx))
|
|
ship_tx_pkt_coalesce_wr(adap, txq);
|
|
|
|
/* calculate the number of flits required for coalescing this packet
|
|
* without the 2 flits of the WR header. These are added further down
|
|
* if we are just starting in new PKTS WR. sgl_len doesn't account for
|
|
* the possible 16 bytes alignment ULP TX commands so we do it here.
|
|
*/
|
|
flits = (sgl_len(mbuf->nb_segs) + 1) & ~1U;
|
|
if (type == 0)
|
|
flits += (sizeof(struct ulp_txpkt) +
|
|
sizeof(struct ulptx_idata)) / sizeof(__be64);
|
|
flits += sizeof(struct cpl_tx_pkt_core) / sizeof(__be64);
|
|
*nflits = flits;
|
|
|
|
/* If coalescing is on, the mbuf is added to a pkts WR */
|
|
if (q->coalesce.idx) {
|
|
ndesc = DIV_ROUND_UP(q->coalesce.flits + flits, 8);
|
|
credits = txq_avail(q) - ndesc;
|
|
|
|
/* If we are wrapping or this is last mbuf then, send the
|
|
* already coalesced mbufs and let the non-coalesce pass
|
|
* handle the mbuf.
|
|
*/
|
|
if (unlikely(credits < 0 || wraps_around(q, ndesc))) {
|
|
ship_tx_pkt_coalesce_wr(adap, txq);
|
|
return 0;
|
|
}
|
|
|
|
/* If the max coalesce len or the max WR len is reached
|
|
* ship the WR and keep coalescing on.
|
|
*/
|
|
if (unlikely((q->coalesce.len + mbuf->pkt_len >
|
|
MAX_COALESCE_LEN) ||
|
|
(q->coalesce.flits + flits >
|
|
q->coalesce.max))) {
|
|
ship_tx_pkt_coalesce_wr(adap, txq);
|
|
goto new;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
new:
|
|
/* start a new pkts WR, the WR header is not filled below */
|
|
flits += sizeof(struct fw_eth_tx_pkts_wr) / sizeof(__be64);
|
|
ndesc = flits_to_desc(q->coalesce.flits + flits);
|
|
credits = txq_avail(q) - ndesc;
|
|
|
|
if (unlikely(credits < 0 || wraps_around(q, ndesc)))
|
|
return 0;
|
|
q->coalesce.flits += 2;
|
|
q->coalesce.type = type;
|
|
q->coalesce.ptr = (unsigned char *)&q->desc[q->pidx] +
|
|
2 * sizeof(__be64);
|
|
return 1;
|
|
}
|
|
|
|
/**
|
|
* tx_do_packet_coalesce - add an mbuf to a coalesce WR
|
|
* @txq: sge_eth_txq used send the mbuf
|
|
* @mbuf: mbuf to be sent
|
|
* @flits: flits needed for this mbuf
|
|
* @adap: adapter structure
|
|
* @pi: port_info structure
|
|
* @addr: mapped address of the mbuf
|
|
*
|
|
* Adds an mbuf to be sent as part of a coalesce WR by filling a
|
|
* ulp_tx_pkt command, ulp_tx_sc_imm command, cpl message and
|
|
* ulp_tx_sc_dsgl command.
|
|
*/
|
|
static inline int tx_do_packet_coalesce(struct sge_eth_txq *txq,
|
|
struct rte_mbuf *mbuf,
|
|
int flits, struct adapter *adap,
|
|
const struct port_info *pi,
|
|
dma_addr_t *addr)
|
|
{
|
|
u64 cntrl, *end;
|
|
struct sge_txq *q = &txq->q;
|
|
struct ulp_txpkt *mc;
|
|
struct ulptx_idata *sc_imm;
|
|
struct cpl_tx_pkt_core *cpl;
|
|
struct tx_sw_desc *sd;
|
|
unsigned int idx = q->coalesce.idx, len = mbuf->pkt_len;
|
|
|
|
if (q->coalesce.type == 0) {
|
|
mc = (struct ulp_txpkt *)q->coalesce.ptr;
|
|
mc->cmd_dest = htonl(V_ULPTX_CMD(4) | V_ULP_TXPKT_DEST(0) |
|
|
V_ULP_TXPKT_FID(adap->sge.fw_evtq.cntxt_id) |
|
|
F_ULP_TXPKT_RO);
|
|
mc->len = htonl(DIV_ROUND_UP(flits, 2));
|
|
sc_imm = (struct ulptx_idata *)(mc + 1);
|
|
sc_imm->cmd_more = htonl(V_ULPTX_CMD(ULP_TX_SC_IMM) |
|
|
F_ULP_TX_SC_MORE);
|
|
sc_imm->len = htonl(sizeof(*cpl));
|
|
end = (u64 *)mc + flits;
|
|
cpl = (struct cpl_tx_pkt_core *)(sc_imm + 1);
|
|
} else {
|
|
end = (u64 *)q->coalesce.ptr + flits;
|
|
cpl = (struct cpl_tx_pkt_core *)q->coalesce.ptr;
|
|
}
|
|
|
|
/* update coalesce structure for this txq */
|
|
q->coalesce.flits += flits;
|
|
q->coalesce.ptr += flits * sizeof(__be64);
|
|
q->coalesce.len += mbuf->pkt_len;
|
|
|
|
/* fill the cpl message, same as in t4_eth_xmit, this should be kept
|
|
* similar to t4_eth_xmit
|
|
*/
|
|
if (mbuf->ol_flags & PKT_TX_IP_CKSUM) {
|
|
cntrl = hwcsum(adap->params.chip, mbuf) |
|
|
F_TXPKT_IPCSUM_DIS;
|
|
txq->stats.tx_cso++;
|
|
} else {
|
|
cntrl = F_TXPKT_L4CSUM_DIS | F_TXPKT_IPCSUM_DIS;
|
|
}
|
|
|
|
if (mbuf->ol_flags & PKT_TX_VLAN_PKT) {
|
|
txq->stats.vlan_ins++;
|
|
cntrl |= F_TXPKT_VLAN_VLD | V_TXPKT_VLAN(mbuf->vlan_tci);
|
|
}
|
|
|
|
cpl->ctrl0 = htonl(V_TXPKT_OPCODE(CPL_TX_PKT_XT) |
|
|
V_TXPKT_INTF(pi->tx_chan) |
|
|
V_TXPKT_PF(adap->pf));
|
|
cpl->pack = htons(0);
|
|
cpl->len = htons(len);
|
|
cpl->ctrl1 = cpu_to_be64(cntrl);
|
|
write_sgl(mbuf, q, (struct ulptx_sgl *)(cpl + 1), end, 0, addr);
|
|
txq->stats.pkts++;
|
|
txq->stats.tx_bytes += len;
|
|
|
|
sd = &q->sdesc[q->pidx + (idx >> 1)];
|
|
if (!(idx & 1)) {
|
|
if (sd->coalesce.idx) {
|
|
int i;
|
|
|
|
for (i = 0; i < sd->coalesce.idx; i++) {
|
|
rte_pktmbuf_free(sd->coalesce.mbuf[i]);
|
|
sd->coalesce.mbuf[i] = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* store pointers to the mbuf and the sgl used in free_tx_desc.
|
|
* each tx desc can hold two pointers corresponding to the value
|
|
* of ETH_COALESCE_PKT_PER_DESC
|
|
*/
|
|
sd->coalesce.mbuf[idx & 1] = mbuf;
|
|
sd->coalesce.sgl[idx & 1] = (struct ulptx_sgl *)(cpl + 1);
|
|
sd->coalesce.idx = (idx & 1) + 1;
|
|
|
|
/* send the coaelsced work request if max reached */
|
|
if (++q->coalesce.idx == ETH_COALESCE_PKT_NUM)
|
|
ship_tx_pkt_coalesce_wr(adap, txq);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* t4_eth_xmit - add a packet to an Ethernet Tx queue
|
|
* @txq: the egress queue
|
|
* @mbuf: the packet
|
|
*
|
|
* Add a packet to an SGE Ethernet Tx queue. Runs with softirqs disabled.
|
|
*/
|
|
int t4_eth_xmit(struct sge_eth_txq *txq, struct rte_mbuf *mbuf)
|
|
{
|
|
const struct port_info *pi;
|
|
struct cpl_tx_pkt_lso_core *lso;
|
|
struct adapter *adap;
|
|
struct rte_mbuf *m = mbuf;
|
|
struct fw_eth_tx_pkt_wr *wr;
|
|
struct cpl_tx_pkt_core *cpl;
|
|
struct tx_sw_desc *d;
|
|
dma_addr_t addr[m->nb_segs];
|
|
unsigned int flits, ndesc, cflits;
|
|
int l3hdr_len, l4hdr_len, eth_xtra_len;
|
|
int len, last_desc;
|
|
int credits;
|
|
u32 wr_mid;
|
|
u64 cntrl, *end;
|
|
bool v6;
|
|
u32 max_pkt_len = txq->eth_dev->data->dev_conf.rxmode.max_rx_pkt_len;
|
|
|
|
/* Reject xmit if queue is stopped */
|
|
if (unlikely(txq->flags & EQ_STOPPED))
|
|
return -(EBUSY);
|
|
|
|
/*
|
|
* The chip min packet length is 10 octets but play safe and reject
|
|
* anything shorter than an Ethernet header.
|
|
*/
|
|
if (unlikely(m->pkt_len < ETHER_HDR_LEN)) {
|
|
out_free:
|
|
rte_pktmbuf_free(m);
|
|
return 0;
|
|
}
|
|
|
|
if ((!(m->ol_flags & PKT_TX_TCP_SEG)) &&
|
|
(unlikely(m->pkt_len > max_pkt_len)))
|
|
goto out_free;
|
|
|
|
pi = (struct port_info *)txq->eth_dev->data->dev_private;
|
|
adap = pi->adapter;
|
|
|
|
cntrl = F_TXPKT_L4CSUM_DIS | F_TXPKT_IPCSUM_DIS;
|
|
/* align the end of coalesce WR to a 512 byte boundary */
|
|
txq->q.coalesce.max = (8 - (txq->q.pidx & 7)) * 8;
|
|
|
|
if (!((m->ol_flags & PKT_TX_TCP_SEG) || (m->pkt_len > ETHER_MAX_LEN))) {
|
|
if (should_tx_packet_coalesce(txq, mbuf, &cflits, adap)) {
|
|
if (unlikely(map_mbuf(mbuf, addr) < 0)) {
|
|
dev_warn(adap, "%s: mapping err for coalesce\n",
|
|
__func__);
|
|
txq->stats.mapping_err++;
|
|
goto out_free;
|
|
}
|
|
rte_prefetch0((volatile void *)addr);
|
|
return tx_do_packet_coalesce(txq, mbuf, cflits, adap,
|
|
pi, addr);
|
|
} else {
|
|
return -EBUSY;
|
|
}
|
|
}
|
|
|
|
if (txq->q.coalesce.idx)
|
|
ship_tx_pkt_coalesce_wr(adap, txq);
|
|
|
|
flits = calc_tx_flits(m);
|
|
ndesc = flits_to_desc(flits);
|
|
credits = txq_avail(&txq->q) - ndesc;
|
|
|
|
if (unlikely(credits < 0)) {
|
|
dev_debug(adap, "%s: Tx ring %u full; credits = %d\n",
|
|
__func__, txq->q.cntxt_id, credits);
|
|
return -EBUSY;
|
|
}
|
|
|
|
if (unlikely(map_mbuf(m, addr) < 0)) {
|
|
txq->stats.mapping_err++;
|
|
goto out_free;
|
|
}
|
|
|
|
wr_mid = V_FW_WR_LEN16(DIV_ROUND_UP(flits, 2));
|
|
if (Q_IDXDIFF(&txq->q, equeidx) >= 64) {
|
|
txq->q.equeidx = txq->q.pidx;
|
|
wr_mid |= F_FW_WR_EQUEQ;
|
|
}
|
|
|
|
wr = (void *)&txq->q.desc[txq->q.pidx];
|
|
wr->equiq_to_len16 = htonl(wr_mid);
|
|
wr->r3 = rte_cpu_to_be_64(0);
|
|
end = (u64 *)wr + flits;
|
|
|
|
len = 0;
|
|
len += sizeof(*cpl);
|
|
|
|
/* Coalescing skipped and we send through normal path */
|
|
if (!(m->ol_flags & PKT_TX_TCP_SEG)) {
|
|
wr->op_immdlen = htonl(V_FW_WR_OP(FW_ETH_TX_PKT_WR) |
|
|
V_FW_WR_IMMDLEN(len));
|
|
cpl = (void *)(wr + 1);
|
|
if (m->ol_flags & PKT_TX_IP_CKSUM) {
|
|
cntrl = hwcsum(adap->params.chip, m) |
|
|
F_TXPKT_IPCSUM_DIS;
|
|
txq->stats.tx_cso++;
|
|
}
|
|
} else {
|
|
lso = (void *)(wr + 1);
|
|
v6 = (m->ol_flags & PKT_TX_IPV6) != 0;
|
|
l3hdr_len = m->l3_len;
|
|
l4hdr_len = m->l4_len;
|
|
eth_xtra_len = m->l2_len - ETHER_HDR_LEN;
|
|
len += sizeof(*lso);
|
|
wr->op_immdlen = htonl(V_FW_WR_OP(FW_ETH_TX_PKT_WR) |
|
|
V_FW_WR_IMMDLEN(len));
|
|
lso->lso_ctrl = htonl(V_LSO_OPCODE(CPL_TX_PKT_LSO) |
|
|
F_LSO_FIRST_SLICE | F_LSO_LAST_SLICE |
|
|
V_LSO_IPV6(v6) |
|
|
V_LSO_ETHHDR_LEN(eth_xtra_len / 4) |
|
|
V_LSO_IPHDR_LEN(l3hdr_len / 4) |
|
|
V_LSO_TCPHDR_LEN(l4hdr_len / 4));
|
|
lso->ipid_ofst = htons(0);
|
|
lso->mss = htons(m->tso_segsz);
|
|
lso->seqno_offset = htonl(0);
|
|
if (is_t4(adap->params.chip))
|
|
lso->len = htonl(m->pkt_len);
|
|
else
|
|
lso->len = htonl(V_LSO_T5_XFER_SIZE(m->pkt_len));
|
|
cpl = (void *)(lso + 1);
|
|
|
|
if (CHELSIO_CHIP_VERSION(adap->params.chip) <= CHELSIO_T5)
|
|
cntrl = V_TXPKT_ETHHDR_LEN(eth_xtra_len);
|
|
else
|
|
cntrl = V_T6_TXPKT_ETHHDR_LEN(eth_xtra_len);
|
|
|
|
cntrl |= V_TXPKT_CSUM_TYPE(v6 ? TX_CSUM_TCPIP6 :
|
|
TX_CSUM_TCPIP) |
|
|
V_TXPKT_IPHDR_LEN(l3hdr_len);
|
|
txq->stats.tso++;
|
|
txq->stats.tx_cso += m->tso_segsz;
|
|
}
|
|
|
|
if (m->ol_flags & PKT_TX_VLAN_PKT) {
|
|
txq->stats.vlan_ins++;
|
|
cntrl |= F_TXPKT_VLAN_VLD | V_TXPKT_VLAN(m->vlan_tci);
|
|
}
|
|
|
|
cpl->ctrl0 = htonl(V_TXPKT_OPCODE(CPL_TX_PKT_XT) |
|
|
V_TXPKT_INTF(pi->tx_chan) |
|
|
V_TXPKT_PF(adap->pf));
|
|
cpl->pack = htons(0);
|
|
cpl->len = htons(m->pkt_len);
|
|
cpl->ctrl1 = cpu_to_be64(cntrl);
|
|
|
|
txq->stats.pkts++;
|
|
txq->stats.tx_bytes += m->pkt_len;
|
|
last_desc = txq->q.pidx + ndesc - 1;
|
|
if (last_desc >= (int)txq->q.size)
|
|
last_desc -= txq->q.size;
|
|
|
|
d = &txq->q.sdesc[last_desc];
|
|
if (d->coalesce.idx) {
|
|
int i;
|
|
|
|
for (i = 0; i < d->coalesce.idx; i++) {
|
|
rte_pktmbuf_free(d->coalesce.mbuf[i]);
|
|
d->coalesce.mbuf[i] = NULL;
|
|
}
|
|
d->coalesce.idx = 0;
|
|
}
|
|
write_sgl(m, &txq->q, (struct ulptx_sgl *)(cpl + 1), end, 0,
|
|
addr);
|
|
txq->q.sdesc[last_desc].mbuf = m;
|
|
txq->q.sdesc[last_desc].sgl = (struct ulptx_sgl *)(cpl + 1);
|
|
txq_advance(&txq->q, ndesc);
|
|
ring_tx_db(adap, &txq->q);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* alloc_ring - allocate resources for an SGE descriptor ring
|
|
* @dev: the PCI device's core device
|
|
* @nelem: the number of descriptors
|
|
* @elem_size: the size of each descriptor
|
|
* @sw_size: the size of the SW state associated with each ring element
|
|
* @phys: the physical address of the allocated ring
|
|
* @metadata: address of the array holding the SW state for the ring
|
|
* @stat_size: extra space in HW ring for status information
|
|
* @node: preferred node for memory allocations
|
|
*
|
|
* Allocates resources for an SGE descriptor ring, such as Tx queues,
|
|
* free buffer lists, or response queues. Each SGE ring requires
|
|
* space for its HW descriptors plus, optionally, space for the SW state
|
|
* associated with each HW entry (the metadata). The function returns
|
|
* three values: the virtual address for the HW ring (the return value
|
|
* of the function), the bus address of the HW ring, and the address
|
|
* of the SW ring.
|
|
*/
|
|
static void *alloc_ring(size_t nelem, size_t elem_size,
|
|
size_t sw_size, dma_addr_t *phys, void *metadata,
|
|
size_t stat_size, __rte_unused uint16_t queue_id,
|
|
int socket_id, const char *z_name,
|
|
const char *z_name_sw)
|
|
{
|
|
size_t len = CXGBE_MAX_RING_DESC_SIZE * elem_size + stat_size;
|
|
const struct rte_memzone *tz;
|
|
void *s = NULL;
|
|
|
|
dev_debug(adapter, "%s: nelem = %zu; elem_size = %zu; sw_size = %zu; "
|
|
"stat_size = %zu; queue_id = %u; socket_id = %d; z_name = %s;"
|
|
" z_name_sw = %s\n", __func__, nelem, elem_size, sw_size,
|
|
stat_size, queue_id, socket_id, z_name, z_name_sw);
|
|
|
|
tz = rte_memzone_lookup(z_name);
|
|
if (tz) {
|
|
dev_debug(adapter, "%s: tz exists...returning existing..\n",
|
|
__func__);
|
|
goto alloc_sw_ring;
|
|
}
|
|
|
|
/*
|
|
* Allocate TX/RX ring hardware descriptors. A memzone large enough to
|
|
* handle the maximum ring size is allocated in order to allow for
|
|
* resizing in later calls to the queue setup function.
|
|
*/
|
|
tz = rte_memzone_reserve_aligned(z_name, len, socket_id, 0, 4096);
|
|
if (!tz)
|
|
return NULL;
|
|
|
|
alloc_sw_ring:
|
|
memset(tz->addr, 0, len);
|
|
if (sw_size) {
|
|
s = rte_zmalloc_socket(z_name_sw, nelem * sw_size,
|
|
RTE_CACHE_LINE_SIZE, socket_id);
|
|
|
|
if (!s) {
|
|
dev_err(adapter, "%s: failed to get sw_ring memory\n",
|
|
__func__);
|
|
return NULL;
|
|
}
|
|
}
|
|
if (metadata)
|
|
*(void **)metadata = s;
|
|
|
|
*phys = (uint64_t)tz->phys_addr;
|
|
return tz->addr;
|
|
}
|
|
|
|
/**
|
|
* t4_pktgl_to_mbuf_usembufs - build an mbuf from a packet gather list
|
|
* @gl: the gather list
|
|
*
|
|
* Builds an mbuf from the given packet gather list. Returns the mbuf or
|
|
* %NULL if mbuf allocation failed.
|
|
*/
|
|
static struct rte_mbuf *t4_pktgl_to_mbuf_usembufs(const struct pkt_gl *gl)
|
|
{
|
|
/*
|
|
* If there's only one mbuf fragment, just return that.
|
|
*/
|
|
if (likely(gl->nfrags == 1))
|
|
return gl->mbufs[0];
|
|
|
|
return NULL;
|
|
}
|
|
|
|
/**
|
|
* t4_pktgl_to_mbuf - build an mbuf from a packet gather list
|
|
* @gl: the gather list
|
|
*
|
|
* Builds an mbuf from the given packet gather list. Returns the mbuf or
|
|
* %NULL if mbuf allocation failed.
|
|
*/
|
|
static struct rte_mbuf *t4_pktgl_to_mbuf(const struct pkt_gl *gl)
|
|
{
|
|
return t4_pktgl_to_mbuf_usembufs(gl);
|
|
}
|
|
|
|
/**
|
|
* t4_ethrx_handler - process an ingress ethernet packet
|
|
* @q: the response queue that received the packet
|
|
* @rsp: the response queue descriptor holding the RX_PKT message
|
|
* @si: the gather list of packet fragments
|
|
*
|
|
* Process an ingress ethernet packet and deliver it to the stack.
|
|
*/
|
|
int t4_ethrx_handler(struct sge_rspq *q, const __be64 *rsp,
|
|
const struct pkt_gl *si)
|
|
{
|
|
struct rte_mbuf *mbuf;
|
|
const struct cpl_rx_pkt *pkt;
|
|
const struct rss_header *rss_hdr;
|
|
bool csum_ok;
|
|
struct sge_eth_rxq *rxq = container_of(q, struct sge_eth_rxq, rspq);
|
|
u16 err_vec;
|
|
|
|
rss_hdr = (const void *)rsp;
|
|
pkt = (const void *)&rsp[1];
|
|
/* Compressed error vector is enabled for T6 only */
|
|
if (q->adapter->params.tp.rx_pkt_encap)
|
|
err_vec = G_T6_COMPR_RXERR_VEC(ntohs(pkt->err_vec));
|
|
else
|
|
err_vec = ntohs(pkt->err_vec);
|
|
csum_ok = pkt->csum_calc && !err_vec;
|
|
|
|
mbuf = t4_pktgl_to_mbuf(si);
|
|
if (unlikely(!mbuf)) {
|
|
rxq->stats.rx_drops++;
|
|
return 0;
|
|
}
|
|
|
|
mbuf->port = pkt->iff;
|
|
if (pkt->l2info & htonl(F_RXF_IP)) {
|
|
mbuf->packet_type = RTE_PTYPE_L3_IPV4;
|
|
if (unlikely(!csum_ok))
|
|
mbuf->ol_flags |= PKT_RX_IP_CKSUM_BAD;
|
|
|
|
if ((pkt->l2info & htonl(F_RXF_UDP | F_RXF_TCP)) && !csum_ok)
|
|
mbuf->ol_flags |= PKT_RX_L4_CKSUM_BAD;
|
|
} else if (pkt->l2info & htonl(F_RXF_IP6)) {
|
|
mbuf->packet_type = RTE_PTYPE_L3_IPV6;
|
|
}
|
|
|
|
mbuf->port = pkt->iff;
|
|
|
|
if (!rss_hdr->filter_tid && rss_hdr->hash_type) {
|
|
mbuf->ol_flags |= PKT_RX_RSS_HASH;
|
|
mbuf->hash.rss = ntohl(rss_hdr->hash_val);
|
|
}
|
|
|
|
if (pkt->vlan_ex) {
|
|
mbuf->ol_flags |= PKT_RX_VLAN_PKT;
|
|
mbuf->vlan_tci = ntohs(pkt->vlan);
|
|
}
|
|
rxq->stats.pkts++;
|
|
rxq->stats.rx_bytes += mbuf->pkt_len;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* is_new_response - check if a response is newly written
|
|
* @r: the response descriptor
|
|
* @q: the response queue
|
|
*
|
|
* Returns true if a response descriptor contains a yet unprocessed
|
|
* response.
|
|
*/
|
|
static inline bool is_new_response(const struct rsp_ctrl *r,
|
|
const struct sge_rspq *q)
|
|
{
|
|
return (r->u.type_gen >> S_RSPD_GEN) == q->gen;
|
|
}
|
|
|
|
#define CXGB4_MSG_AN ((void *)1)
|
|
|
|
/**
|
|
* rspq_next - advance to the next entry in a response queue
|
|
* @q: the queue
|
|
*
|
|
* Updates the state of a response queue to advance it to the next entry.
|
|
*/
|
|
static inline void rspq_next(struct sge_rspq *q)
|
|
{
|
|
q->cur_desc = (const __be64 *)((const char *)q->cur_desc + q->iqe_len);
|
|
if (unlikely(++q->cidx == q->size)) {
|
|
q->cidx = 0;
|
|
q->gen ^= 1;
|
|
q->cur_desc = q->desc;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* process_responses - process responses from an SGE response queue
|
|
* @q: the ingress queue to process
|
|
* @budget: how many responses can be processed in this round
|
|
* @rx_pkts: mbuf to put the pkts
|
|
*
|
|
* Process responses from an SGE response queue up to the supplied budget.
|
|
* Responses include received packets as well as control messages from FW
|
|
* or HW.
|
|
*
|
|
* Additionally choose the interrupt holdoff time for the next interrupt
|
|
* on this queue. If the system is under memory shortage use a fairly
|
|
* long delay to help recovery.
|
|
*/
|
|
static int process_responses(struct sge_rspq *q, int budget,
|
|
struct rte_mbuf **rx_pkts)
|
|
{
|
|
int ret = 0, rsp_type;
|
|
int budget_left = budget;
|
|
const struct rsp_ctrl *rc;
|
|
struct sge_eth_rxq *rxq = container_of(q, struct sge_eth_rxq, rspq);
|
|
|
|
while (likely(budget_left)) {
|
|
rc = (const struct rsp_ctrl *)
|
|
((const char *)q->cur_desc + (q->iqe_len - sizeof(*rc)));
|
|
|
|
if (!is_new_response(rc, q))
|
|
break;
|
|
|
|
/*
|
|
* Ensure response has been read
|
|
*/
|
|
rmb();
|
|
rsp_type = G_RSPD_TYPE(rc->u.type_gen);
|
|
|
|
if (likely(rsp_type == X_RSPD_TYPE_FLBUF)) {
|
|
const struct rx_sw_desc *rsd =
|
|
&rxq->fl.sdesc[rxq->fl.cidx];
|
|
const struct rss_header *rss_hdr =
|
|
(const void *)q->cur_desc;
|
|
const struct cpl_rx_pkt *cpl =
|
|
(const void *)&q->cur_desc[1];
|
|
struct rte_mbuf *pkt, *npkt;
|
|
u32 len, bufsz;
|
|
bool csum_ok;
|
|
u16 err_vec;
|
|
|
|
len = ntohl(rc->pldbuflen_qid);
|
|
BUG_ON(!(len & F_RSPD_NEWBUF));
|
|
pkt = rsd->buf;
|
|
npkt = pkt;
|
|
len = G_RSPD_LEN(len);
|
|
pkt->pkt_len = len;
|
|
|
|
/* Compressed error vector is enabled for
|
|
* T6 only
|
|
*/
|
|
if (q->adapter->params.tp.rx_pkt_encap)
|
|
err_vec = G_T6_COMPR_RXERR_VEC(
|
|
ntohs(cpl->err_vec));
|
|
else
|
|
err_vec = ntohs(cpl->err_vec);
|
|
csum_ok = cpl->csum_calc && !err_vec;
|
|
|
|
/* Chain mbufs into len if necessary */
|
|
while (len) {
|
|
struct rte_mbuf *new_pkt = rsd->buf;
|
|
|
|
bufsz = min(get_buf_size(q->adapter, rsd), len);
|
|
new_pkt->data_len = bufsz;
|
|
unmap_rx_buf(&rxq->fl);
|
|
len -= bufsz;
|
|
npkt->next = new_pkt;
|
|
npkt = new_pkt;
|
|
pkt->nb_segs++;
|
|
rsd = &rxq->fl.sdesc[rxq->fl.cidx];
|
|
}
|
|
npkt->next = NULL;
|
|
pkt->nb_segs--;
|
|
|
|
if (cpl->l2info & htonl(F_RXF_IP)) {
|
|
pkt->packet_type = RTE_PTYPE_L3_IPV4;
|
|
if (unlikely(!csum_ok))
|
|
pkt->ol_flags |= PKT_RX_IP_CKSUM_BAD;
|
|
|
|
if ((cpl->l2info &
|
|
htonl(F_RXF_UDP | F_RXF_TCP)) && !csum_ok)
|
|
pkt->ol_flags |= PKT_RX_L4_CKSUM_BAD;
|
|
} else if (cpl->l2info & htonl(F_RXF_IP6)) {
|
|
pkt->packet_type = RTE_PTYPE_L3_IPV6;
|
|
}
|
|
|
|
if (!rss_hdr->filter_tid && rss_hdr->hash_type) {
|
|
pkt->ol_flags |= PKT_RX_RSS_HASH;
|
|
pkt->hash.rss = ntohl(rss_hdr->hash_val);
|
|
}
|
|
|
|
if (cpl->vlan_ex) {
|
|
pkt->ol_flags |= PKT_RX_VLAN_PKT;
|
|
pkt->vlan_tci = ntohs(cpl->vlan);
|
|
}
|
|
rxq->stats.pkts++;
|
|
rxq->stats.rx_bytes += pkt->pkt_len;
|
|
rx_pkts[budget - budget_left] = pkt;
|
|
} else if (likely(rsp_type == X_RSPD_TYPE_CPL)) {
|
|
ret = q->handler(q, q->cur_desc, NULL);
|
|
} else {
|
|
ret = q->handler(q, (const __be64 *)rc, CXGB4_MSG_AN);
|
|
}
|
|
|
|
if (unlikely(ret)) {
|
|
/* couldn't process descriptor, back off for recovery */
|
|
q->next_intr_params = V_QINTR_TIMER_IDX(NOMEM_TMR_IDX);
|
|
break;
|
|
}
|
|
|
|
rspq_next(q);
|
|
budget_left--;
|
|
|
|
if (R_IDXDIFF(q, gts_idx) >= 64) {
|
|
unsigned int cidx_inc = R_IDXDIFF(q, gts_idx);
|
|
unsigned int params;
|
|
u32 val;
|
|
|
|
if (fl_cap(&rxq->fl) - rxq->fl.avail >= 64)
|
|
__refill_fl(q->adapter, &rxq->fl);
|
|
params = V_QINTR_TIMER_IDX(X_TIMERREG_UPDATE_CIDX);
|
|
q->next_intr_params = params;
|
|
val = V_CIDXINC(cidx_inc) | V_SEINTARM(params);
|
|
|
|
if (unlikely(!q->bar2_addr))
|
|
t4_write_reg(q->adapter, MYPF_REG(A_SGE_PF_GTS),
|
|
val |
|
|
V_INGRESSQID((u32)q->cntxt_id));
|
|
else {
|
|
writel(val | V_INGRESSQID(q->bar2_qid),
|
|
(void *)((uintptr_t)q->bar2_addr +
|
|
SGE_UDB_GTS));
|
|
/*
|
|
* This Write memory Barrier will force the
|
|
* write to the User Doorbell area to be
|
|
* flushed.
|
|
*/
|
|
wmb();
|
|
}
|
|
q->gts_idx = q->cidx;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* If this is a Response Queue with an associated Free List and
|
|
* there's room for another chunk of new Free List buffer pointers,
|
|
* refill the Free List.
|
|
*/
|
|
|
|
if (q->offset >= 0 && fl_cap(&rxq->fl) - rxq->fl.avail >= 64)
|
|
__refill_fl(q->adapter, &rxq->fl);
|
|
|
|
return budget - budget_left;
|
|
}
|
|
|
|
int cxgbe_poll(struct sge_rspq *q, struct rte_mbuf **rx_pkts,
|
|
unsigned int budget, unsigned int *work_done)
|
|
{
|
|
int err = 0;
|
|
|
|
*work_done = process_responses(q, budget, rx_pkts);
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* bar2_address - return the BAR2 address for an SGE Queue's Registers
|
|
* @adapter: the adapter
|
|
* @qid: the SGE Queue ID
|
|
* @qtype: the SGE Queue Type (Egress or Ingress)
|
|
* @pbar2_qid: BAR2 Queue ID or 0 for Queue ID inferred SGE Queues
|
|
*
|
|
* Returns the BAR2 address for the SGE Queue Registers associated with
|
|
* @qid. If BAR2 SGE Registers aren't available, returns NULL. Also
|
|
* returns the BAR2 Queue ID to be used with writes to the BAR2 SGE
|
|
* Queue Registers. If the BAR2 Queue ID is 0, then "Inferred Queue ID"
|
|
* Registers are supported (e.g. the Write Combining Doorbell Buffer).
|
|
*/
|
|
static void __iomem *bar2_address(struct adapter *adapter, unsigned int qid,
|
|
enum t4_bar2_qtype qtype,
|
|
unsigned int *pbar2_qid)
|
|
{
|
|
u64 bar2_qoffset;
|
|
int ret;
|
|
|
|
ret = t4_bar2_sge_qregs(adapter, qid, qtype, &bar2_qoffset, pbar2_qid);
|
|
if (ret)
|
|
return NULL;
|
|
|
|
return adapter->bar2 + bar2_qoffset;
|
|
}
|
|
|
|
int t4_sge_eth_rxq_start(struct adapter *adap, struct sge_rspq *rq)
|
|
{
|
|
struct sge_eth_rxq *rxq = container_of(rq, struct sge_eth_rxq, rspq);
|
|
unsigned int fl_id = rxq->fl.size ? rxq->fl.cntxt_id : 0xffff;
|
|
|
|
return t4_iq_start_stop(adap, adap->mbox, true, adap->pf, 0,
|
|
rq->cntxt_id, fl_id, 0xffff);
|
|
}
|
|
|
|
int t4_sge_eth_rxq_stop(struct adapter *adap, struct sge_rspq *rq)
|
|
{
|
|
struct sge_eth_rxq *rxq = container_of(rq, struct sge_eth_rxq, rspq);
|
|
unsigned int fl_id = rxq->fl.size ? rxq->fl.cntxt_id : 0xffff;
|
|
|
|
return t4_iq_start_stop(adap, adap->mbox, false, adap->pf, 0,
|
|
rq->cntxt_id, fl_id, 0xffff);
|
|
}
|
|
|
|
/*
|
|
* @intr_idx: MSI/MSI-X vector if >=0, -(absolute qid + 1) if < 0
|
|
* @cong: < 0 -> no congestion feedback, >= 0 -> congestion channel map
|
|
*/
|
|
int t4_sge_alloc_rxq(struct adapter *adap, struct sge_rspq *iq, bool fwevtq,
|
|
struct rte_eth_dev *eth_dev, int intr_idx,
|
|
struct sge_fl *fl, rspq_handler_t hnd, int cong,
|
|
struct rte_mempool *mp, int queue_id, int socket_id)
|
|
{
|
|
int ret, flsz = 0;
|
|
struct fw_iq_cmd c;
|
|
struct sge *s = &adap->sge;
|
|
struct port_info *pi = (struct port_info *)(eth_dev->data->dev_private);
|
|
char z_name[RTE_MEMZONE_NAMESIZE];
|
|
char z_name_sw[RTE_MEMZONE_NAMESIZE];
|
|
unsigned int nb_refill;
|
|
|
|
/* Size needs to be multiple of 16, including status entry. */
|
|
iq->size = cxgbe_roundup(iq->size, 16);
|
|
|
|
snprintf(z_name, sizeof(z_name), "%s_%s_%d_%d",
|
|
eth_dev->data->drv_name,
|
|
fwevtq ? "fwq_ring" : "rx_ring",
|
|
eth_dev->data->port_id, queue_id);
|
|
snprintf(z_name_sw, sizeof(z_name_sw), "%s_sw_ring", z_name);
|
|
|
|
iq->desc = alloc_ring(iq->size, iq->iqe_len, 0, &iq->phys_addr, NULL, 0,
|
|
queue_id, socket_id, z_name, z_name_sw);
|
|
if (!iq->desc)
|
|
return -ENOMEM;
|
|
|
|
memset(&c, 0, sizeof(c));
|
|
c.op_to_vfn = htonl(V_FW_CMD_OP(FW_IQ_CMD) | F_FW_CMD_REQUEST |
|
|
F_FW_CMD_WRITE | F_FW_CMD_EXEC |
|
|
V_FW_IQ_CMD_PFN(adap->pf) | V_FW_IQ_CMD_VFN(0));
|
|
c.alloc_to_len16 = htonl(F_FW_IQ_CMD_ALLOC | F_FW_IQ_CMD_IQSTART |
|
|
(sizeof(c) / 16));
|
|
c.type_to_iqandstindex =
|
|
htonl(V_FW_IQ_CMD_TYPE(FW_IQ_TYPE_FL_INT_CAP) |
|
|
V_FW_IQ_CMD_IQASYNCH(fwevtq) |
|
|
V_FW_IQ_CMD_VIID(pi->viid) |
|
|
V_FW_IQ_CMD_IQANDST(intr_idx < 0) |
|
|
V_FW_IQ_CMD_IQANUD(X_UPDATEDELIVERY_INTERRUPT) |
|
|
V_FW_IQ_CMD_IQANDSTINDEX(intr_idx >= 0 ? intr_idx :
|
|
-intr_idx - 1));
|
|
c.iqdroprss_to_iqesize =
|
|
htons(V_FW_IQ_CMD_IQPCIECH(pi->tx_chan) |
|
|
F_FW_IQ_CMD_IQGTSMODE |
|
|
V_FW_IQ_CMD_IQINTCNTTHRESH(iq->pktcnt_idx) |
|
|
V_FW_IQ_CMD_IQESIZE(ilog2(iq->iqe_len) - 4));
|
|
c.iqsize = htons(iq->size);
|
|
c.iqaddr = cpu_to_be64(iq->phys_addr);
|
|
if (cong >= 0)
|
|
c.iqns_to_fl0congen = htonl(F_FW_IQ_CMD_IQFLINTCONGEN);
|
|
|
|
if (fl) {
|
|
struct sge_eth_rxq *rxq = container_of(fl, struct sge_eth_rxq,
|
|
fl);
|
|
unsigned int chip_ver = CHELSIO_CHIP_VERSION(adap->params.chip);
|
|
|
|
/*
|
|
* Allocate the ring for the hardware free list (with space
|
|
* for its status page) along with the associated software
|
|
* descriptor ring. The free list size needs to be a multiple
|
|
* of the Egress Queue Unit and at least 2 Egress Units larger
|
|
* than the SGE's Egress Congrestion Threshold
|
|
* (fl_starve_thres - 1).
|
|
*/
|
|
if (fl->size < s->fl_starve_thres - 1 + 2 * 8)
|
|
fl->size = s->fl_starve_thres - 1 + 2 * 8;
|
|
fl->size = cxgbe_roundup(fl->size, 8);
|
|
|
|
snprintf(z_name, sizeof(z_name), "%s_%s_%d_%d",
|
|
eth_dev->data->drv_name,
|
|
fwevtq ? "fwq_ring" : "fl_ring",
|
|
eth_dev->data->port_id, queue_id);
|
|
snprintf(z_name_sw, sizeof(z_name_sw), "%s_sw_ring", z_name);
|
|
|
|
fl->desc = alloc_ring(fl->size, sizeof(__be64),
|
|
sizeof(struct rx_sw_desc),
|
|
&fl->addr, &fl->sdesc, s->stat_len,
|
|
queue_id, socket_id, z_name, z_name_sw);
|
|
|
|
if (!fl->desc)
|
|
goto fl_nomem;
|
|
|
|
flsz = fl->size / 8 + s->stat_len / sizeof(struct tx_desc);
|
|
c.iqns_to_fl0congen |=
|
|
htonl(V_FW_IQ_CMD_FL0HOSTFCMODE(X_HOSTFCMODE_NONE) |
|
|
(unlikely(rxq->usembufs) ?
|
|
0 : F_FW_IQ_CMD_FL0PACKEN) |
|
|
F_FW_IQ_CMD_FL0FETCHRO | F_FW_IQ_CMD_FL0DATARO |
|
|
F_FW_IQ_CMD_FL0PADEN);
|
|
if (cong >= 0)
|
|
c.iqns_to_fl0congen |=
|
|
htonl(V_FW_IQ_CMD_FL0CNGCHMAP(cong) |
|
|
F_FW_IQ_CMD_FL0CONGCIF |
|
|
F_FW_IQ_CMD_FL0CONGEN);
|
|
|
|
/* In T6, for egress queue type FL there is internal overhead
|
|
* of 16B for header going into FLM module.
|
|
* Hence maximum allowed burst size will be 448 bytes.
|
|
*/
|
|
c.fl0dcaen_to_fl0cidxfthresh =
|
|
htons(V_FW_IQ_CMD_FL0FBMIN(chip_ver <= CHELSIO_T5 ?
|
|
X_FETCHBURSTMIN_128B :
|
|
X_FETCHBURSTMIN_64B) |
|
|
V_FW_IQ_CMD_FL0FBMAX(chip_ver <= CHELSIO_T5 ?
|
|
X_FETCHBURSTMAX_512B :
|
|
X_FETCHBURSTMAX_256B));
|
|
c.fl0size = htons(flsz);
|
|
c.fl0addr = cpu_to_be64(fl->addr);
|
|
}
|
|
|
|
ret = t4_wr_mbox(adap, adap->mbox, &c, sizeof(c), &c);
|
|
if (ret)
|
|
goto err;
|
|
|
|
iq->cur_desc = iq->desc;
|
|
iq->cidx = 0;
|
|
iq->gts_idx = 0;
|
|
iq->gen = 1;
|
|
iq->next_intr_params = iq->intr_params;
|
|
iq->cntxt_id = ntohs(c.iqid);
|
|
iq->abs_id = ntohs(c.physiqid);
|
|
iq->bar2_addr = bar2_address(adap, iq->cntxt_id, T4_BAR2_QTYPE_INGRESS,
|
|
&iq->bar2_qid);
|
|
iq->size--; /* subtract status entry */
|
|
iq->eth_dev = eth_dev;
|
|
iq->handler = hnd;
|
|
iq->port_id = pi->port_id;
|
|
iq->mb_pool = mp;
|
|
|
|
/* set offset to -1 to distinguish ingress queues without FL */
|
|
iq->offset = fl ? 0 : -1;
|
|
|
|
if (fl) {
|
|
fl->cntxt_id = ntohs(c.fl0id);
|
|
fl->avail = 0;
|
|
fl->pend_cred = 0;
|
|
fl->pidx = 0;
|
|
fl->cidx = 0;
|
|
fl->alloc_failed = 0;
|
|
|
|
/*
|
|
* Note, we must initialize the BAR2 Free List User Doorbell
|
|
* information before refilling the Free List!
|
|
*/
|
|
fl->bar2_addr = bar2_address(adap, fl->cntxt_id,
|
|
T4_BAR2_QTYPE_EGRESS,
|
|
&fl->bar2_qid);
|
|
|
|
nb_refill = refill_fl(adap, fl, fl_cap(fl));
|
|
if (nb_refill != fl_cap(fl)) {
|
|
ret = -ENOMEM;
|
|
dev_err(adap, "%s: mbuf alloc failed with error: %d\n",
|
|
__func__, ret);
|
|
goto refill_fl_err;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* For T5 and later we attempt to set up the Congestion Manager values
|
|
* of the new RX Ethernet Queue. This should really be handled by
|
|
* firmware because it's more complex than any host driver wants to
|
|
* get involved with and it's different per chip and this is almost
|
|
* certainly wrong. Formware would be wrong as well, but it would be
|
|
* a lot easier to fix in one place ... For now we do something very
|
|
* simple (and hopefully less wrong).
|
|
*/
|
|
if (!is_t4(adap->params.chip) && cong >= 0) {
|
|
u32 param, val;
|
|
int i;
|
|
|
|
param = (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DMAQ) |
|
|
V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DMAQ_CONM_CTXT) |
|
|
V_FW_PARAMS_PARAM_YZ(iq->cntxt_id));
|
|
if (cong == 0) {
|
|
val = V_CONMCTXT_CNGTPMODE(X_CONMCTXT_CNGTPMODE_QUEUE);
|
|
} else {
|
|
val = V_CONMCTXT_CNGTPMODE(
|
|
X_CONMCTXT_CNGTPMODE_CHANNEL);
|
|
for (i = 0; i < 4; i++) {
|
|
if (cong & (1 << i))
|
|
val |= V_CONMCTXT_CNGCHMAP(1 <<
|
|
(i << 2));
|
|
}
|
|
}
|
|
ret = t4_set_params(adap, adap->mbox, adap->pf, 0, 1,
|
|
¶m, &val);
|
|
if (ret)
|
|
dev_warn(adap->pdev_dev, "Failed to set Congestion Manager Context for Ingress Queue %d: %d\n",
|
|
iq->cntxt_id, -ret);
|
|
}
|
|
|
|
return 0;
|
|
|
|
refill_fl_err:
|
|
t4_iq_free(adap, adap->mbox, adap->pf, 0, FW_IQ_TYPE_FL_INT_CAP,
|
|
iq->cntxt_id, fl->cntxt_id, 0xffff);
|
|
fl_nomem:
|
|
ret = -ENOMEM;
|
|
err:
|
|
iq->cntxt_id = 0;
|
|
iq->abs_id = 0;
|
|
if (iq->desc)
|
|
iq->desc = NULL;
|
|
|
|
if (fl && fl->desc) {
|
|
rte_free(fl->sdesc);
|
|
fl->cntxt_id = 0;
|
|
fl->sdesc = NULL;
|
|
fl->desc = NULL;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static void init_txq(struct adapter *adap, struct sge_txq *q, unsigned int id)
|
|
{
|
|
q->cntxt_id = id;
|
|
q->bar2_addr = bar2_address(adap, q->cntxt_id, T4_BAR2_QTYPE_EGRESS,
|
|
&q->bar2_qid);
|
|
q->cidx = 0;
|
|
q->pidx = 0;
|
|
q->dbidx = 0;
|
|
q->in_use = 0;
|
|
q->equeidx = 0;
|
|
q->coalesce.idx = 0;
|
|
q->coalesce.len = 0;
|
|
q->coalesce.flits = 0;
|
|
q->last_coal_idx = 0;
|
|
q->last_pidx = 0;
|
|
q->stat = (void *)&q->desc[q->size];
|
|
}
|
|
|
|
int t4_sge_eth_txq_start(struct sge_eth_txq *txq)
|
|
{
|
|
/*
|
|
* TODO: For flow-control, queue may be stopped waiting to reclaim
|
|
* credits.
|
|
* Ensure queue is in EQ_STOPPED state before starting it.
|
|
*/
|
|
if (!(txq->flags & EQ_STOPPED))
|
|
return -(EBUSY);
|
|
|
|
txq->flags &= ~EQ_STOPPED;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int t4_sge_eth_txq_stop(struct sge_eth_txq *txq)
|
|
{
|
|
txq->flags |= EQ_STOPPED;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int t4_sge_alloc_eth_txq(struct adapter *adap, struct sge_eth_txq *txq,
|
|
struct rte_eth_dev *eth_dev, uint16_t queue_id,
|
|
unsigned int iqid, int socket_id)
|
|
{
|
|
int ret, nentries;
|
|
struct fw_eq_eth_cmd c;
|
|
struct sge *s = &adap->sge;
|
|
struct port_info *pi = (struct port_info *)(eth_dev->data->dev_private);
|
|
char z_name[RTE_MEMZONE_NAMESIZE];
|
|
char z_name_sw[RTE_MEMZONE_NAMESIZE];
|
|
|
|
/* Add status entries */
|
|
nentries = txq->q.size + s->stat_len / sizeof(struct tx_desc);
|
|
|
|
snprintf(z_name, sizeof(z_name), "%s_%s_%d_%d",
|
|
eth_dev->data->drv_name, "tx_ring",
|
|
eth_dev->data->port_id, queue_id);
|
|
snprintf(z_name_sw, sizeof(z_name_sw), "%s_sw_ring", z_name);
|
|
|
|
txq->q.desc = alloc_ring(txq->q.size, sizeof(struct tx_desc),
|
|
sizeof(struct tx_sw_desc), &txq->q.phys_addr,
|
|
&txq->q.sdesc, s->stat_len, queue_id,
|
|
socket_id, z_name, z_name_sw);
|
|
if (!txq->q.desc)
|
|
return -ENOMEM;
|
|
|
|
memset(&c, 0, sizeof(c));
|
|
c.op_to_vfn = htonl(V_FW_CMD_OP(FW_EQ_ETH_CMD) | F_FW_CMD_REQUEST |
|
|
F_FW_CMD_WRITE | F_FW_CMD_EXEC |
|
|
V_FW_EQ_ETH_CMD_PFN(adap->pf) |
|
|
V_FW_EQ_ETH_CMD_VFN(0));
|
|
c.alloc_to_len16 = htonl(F_FW_EQ_ETH_CMD_ALLOC |
|
|
F_FW_EQ_ETH_CMD_EQSTART | (sizeof(c) / 16));
|
|
c.autoequiqe_to_viid = htonl(F_FW_EQ_ETH_CMD_AUTOEQUEQE |
|
|
V_FW_EQ_ETH_CMD_VIID(pi->viid));
|
|
c.fetchszm_to_iqid =
|
|
htonl(V_FW_EQ_ETH_CMD_HOSTFCMODE(X_HOSTFCMODE_NONE) |
|
|
V_FW_EQ_ETH_CMD_PCIECHN(pi->tx_chan) |
|
|
F_FW_EQ_ETH_CMD_FETCHRO | V_FW_EQ_ETH_CMD_IQID(iqid));
|
|
c.dcaen_to_eqsize =
|
|
htonl(V_FW_EQ_ETH_CMD_FBMIN(X_FETCHBURSTMIN_64B) |
|
|
V_FW_EQ_ETH_CMD_FBMAX(X_FETCHBURSTMAX_512B) |
|
|
V_FW_EQ_ETH_CMD_EQSIZE(nentries));
|
|
c.eqaddr = rte_cpu_to_be_64(txq->q.phys_addr);
|
|
|
|
ret = t4_wr_mbox(adap, adap->mbox, &c, sizeof(c), &c);
|
|
if (ret) {
|
|
rte_free(txq->q.sdesc);
|
|
txq->q.sdesc = NULL;
|
|
txq->q.desc = NULL;
|
|
return ret;
|
|
}
|
|
|
|
init_txq(adap, &txq->q, G_FW_EQ_ETH_CMD_EQID(ntohl(c.eqid_pkd)));
|
|
txq->stats.tso = 0;
|
|
txq->stats.pkts = 0;
|
|
txq->stats.tx_cso = 0;
|
|
txq->stats.coal_wr = 0;
|
|
txq->stats.vlan_ins = 0;
|
|
txq->stats.tx_bytes = 0;
|
|
txq->stats.coal_pkts = 0;
|
|
txq->stats.mapping_err = 0;
|
|
txq->flags |= EQ_STOPPED;
|
|
txq->eth_dev = eth_dev;
|
|
t4_os_lock_init(&txq->txq_lock);
|
|
return 0;
|
|
}
|
|
|
|
static void free_txq(struct sge_txq *q)
|
|
{
|
|
q->cntxt_id = 0;
|
|
q->sdesc = NULL;
|
|
q->desc = NULL;
|
|
}
|
|
|
|
static void free_rspq_fl(struct adapter *adap, struct sge_rspq *rq,
|
|
struct sge_fl *fl)
|
|
{
|
|
unsigned int fl_id = fl ? fl->cntxt_id : 0xffff;
|
|
|
|
t4_iq_free(adap, adap->mbox, adap->pf, 0, FW_IQ_TYPE_FL_INT_CAP,
|
|
rq->cntxt_id, fl_id, 0xffff);
|
|
rq->cntxt_id = 0;
|
|
rq->abs_id = 0;
|
|
rq->desc = NULL;
|
|
|
|
if (fl) {
|
|
free_rx_bufs(fl, fl->avail);
|
|
rte_free(fl->sdesc);
|
|
fl->sdesc = NULL;
|
|
fl->cntxt_id = 0;
|
|
fl->desc = NULL;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Clear all queues of the port
|
|
*
|
|
* Note: This function must only be called after rx and tx path
|
|
* of the port have been disabled.
|
|
*/
|
|
void t4_sge_eth_clear_queues(struct port_info *pi)
|
|
{
|
|
int i;
|
|
struct adapter *adap = pi->adapter;
|
|
struct sge_eth_rxq *rxq = &adap->sge.ethrxq[pi->first_qset];
|
|
struct sge_eth_txq *txq = &adap->sge.ethtxq[pi->first_qset];
|
|
|
|
for (i = 0; i < pi->n_rx_qsets; i++, rxq++) {
|
|
if (rxq->rspq.desc)
|
|
t4_sge_eth_rxq_stop(adap, &rxq->rspq);
|
|
}
|
|
for (i = 0; i < pi->n_tx_qsets; i++, txq++) {
|
|
if (txq->q.desc) {
|
|
struct sge_txq *q = &txq->q;
|
|
|
|
t4_sge_eth_txq_stop(txq);
|
|
reclaim_completed_tx(q);
|
|
free_tx_desc(q, q->size);
|
|
q->equeidx = q->pidx;
|
|
}
|
|
}
|
|
}
|
|
|
|
void t4_sge_eth_rxq_release(struct adapter *adap, struct sge_eth_rxq *rxq)
|
|
{
|
|
if (rxq->rspq.desc) {
|
|
t4_sge_eth_rxq_stop(adap, &rxq->rspq);
|
|
free_rspq_fl(adap, &rxq->rspq, rxq->fl.size ? &rxq->fl : NULL);
|
|
}
|
|
}
|
|
|
|
void t4_sge_eth_txq_release(struct adapter *adap, struct sge_eth_txq *txq)
|
|
{
|
|
if (txq->q.desc) {
|
|
t4_sge_eth_txq_stop(txq);
|
|
reclaim_completed_tx(&txq->q);
|
|
t4_eth_eq_free(adap, adap->mbox, adap->pf, 0, txq->q.cntxt_id);
|
|
free_tx_desc(&txq->q, txq->q.size);
|
|
rte_free(txq->q.sdesc);
|
|
free_txq(&txq->q);
|
|
}
|
|
}
|
|
|
|
void t4_sge_tx_monitor_start(struct adapter *adap)
|
|
{
|
|
rte_eal_alarm_set(50, tx_timer_cb, (void *)adap);
|
|
}
|
|
|
|
void t4_sge_tx_monitor_stop(struct adapter *adap)
|
|
{
|
|
rte_eal_alarm_cancel(tx_timer_cb, (void *)adap);
|
|
}
|
|
|
|
/**
|
|
* t4_free_sge_resources - free SGE resources
|
|
* @adap: the adapter
|
|
*
|
|
* Frees resources used by the SGE queue sets.
|
|
*/
|
|
void t4_free_sge_resources(struct adapter *adap)
|
|
{
|
|
int i;
|
|
struct sge_eth_rxq *rxq = &adap->sge.ethrxq[0];
|
|
struct sge_eth_txq *txq = &adap->sge.ethtxq[0];
|
|
|
|
/* clean up Ethernet Tx/Rx queues */
|
|
for (i = 0; i < adap->sge.max_ethqsets; i++, rxq++, txq++) {
|
|
/* Free only the queues allocated */
|
|
if (rxq->rspq.desc) {
|
|
t4_sge_eth_rxq_release(adap, rxq);
|
|
rxq->rspq.eth_dev = NULL;
|
|
}
|
|
if (txq->q.desc) {
|
|
t4_sge_eth_txq_release(adap, txq);
|
|
txq->eth_dev = NULL;
|
|
}
|
|
}
|
|
|
|
if (adap->sge.fw_evtq.desc)
|
|
free_rspq_fl(adap, &adap->sge.fw_evtq, NULL);
|
|
}
|
|
|
|
/**
|
|
* t4_sge_init - initialize SGE
|
|
* @adap: the adapter
|
|
*
|
|
* Performs SGE initialization needed every time after a chip reset.
|
|
* We do not initialize any of the queues here, instead the driver
|
|
* top-level must request those individually.
|
|
*
|
|
* Called in two different modes:
|
|
*
|
|
* 1. Perform actual hardware initialization and record hard-coded
|
|
* parameters which were used. This gets used when we're the
|
|
* Master PF and the Firmware Configuration File support didn't
|
|
* work for some reason.
|
|
*
|
|
* 2. We're not the Master PF or initialization was performed with
|
|
* a Firmware Configuration File. In this case we need to grab
|
|
* any of the SGE operating parameters that we need to have in
|
|
* order to do our job and make sure we can live with them ...
|
|
*/
|
|
static int t4_sge_init_soft(struct adapter *adap)
|
|
{
|
|
struct sge *s = &adap->sge;
|
|
u32 fl_small_pg, fl_large_pg, fl_small_mtu, fl_large_mtu;
|
|
u32 timer_value_0_and_1, timer_value_2_and_3, timer_value_4_and_5;
|
|
u32 ingress_rx_threshold;
|
|
|
|
/*
|
|
* Verify that CPL messages are going to the Ingress Queue for
|
|
* process_responses() and that only packet data is going to the
|
|
* Free Lists.
|
|
*/
|
|
if ((t4_read_reg(adap, A_SGE_CONTROL) & F_RXPKTCPLMODE) !=
|
|
V_RXPKTCPLMODE(X_RXPKTCPLMODE_SPLIT)) {
|
|
dev_err(adap, "bad SGE CPL MODE\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* Validate the Host Buffer Register Array indices that we want to
|
|
* use ...
|
|
*
|
|
* XXX Note that we should really read through the Host Buffer Size
|
|
* XXX register array and find the indices of the Buffer Sizes which
|
|
* XXX meet our needs!
|
|
*/
|
|
#define READ_FL_BUF(x) \
|
|
t4_read_reg(adap, A_SGE_FL_BUFFER_SIZE0 + (x) * sizeof(u32))
|
|
|
|
fl_small_pg = READ_FL_BUF(RX_SMALL_PG_BUF);
|
|
fl_large_pg = READ_FL_BUF(RX_LARGE_PG_BUF);
|
|
fl_small_mtu = READ_FL_BUF(RX_SMALL_MTU_BUF);
|
|
fl_large_mtu = READ_FL_BUF(RX_LARGE_MTU_BUF);
|
|
|
|
/*
|
|
* We only bother using the Large Page logic if the Large Page Buffer
|
|
* is larger than our Page Size Buffer.
|
|
*/
|
|
if (fl_large_pg <= fl_small_pg)
|
|
fl_large_pg = 0;
|
|
|
|
#undef READ_FL_BUF
|
|
|
|
/*
|
|
* The Page Size Buffer must be exactly equal to our Page Size and the
|
|
* Large Page Size Buffer should be 0 (per above) or a power of 2.
|
|
*/
|
|
if (fl_small_pg != CXGBE_PAGE_SIZE ||
|
|
(fl_large_pg & (fl_large_pg - 1)) != 0) {
|
|
dev_err(adap, "bad SGE FL page buffer sizes [%d, %d]\n",
|
|
fl_small_pg, fl_large_pg);
|
|
return -EINVAL;
|
|
}
|
|
if (fl_large_pg)
|
|
s->fl_pg_order = ilog2(fl_large_pg) - PAGE_SHIFT;
|
|
|
|
if (adap->use_unpacked_mode) {
|
|
int err = 0;
|
|
|
|
if (fl_small_mtu < FL_MTU_SMALL_BUFSIZE(adap)) {
|
|
dev_err(adap, "bad SGE FL small MTU %d\n",
|
|
fl_small_mtu);
|
|
err = -EINVAL;
|
|
}
|
|
if (fl_large_mtu < FL_MTU_LARGE_BUFSIZE(adap)) {
|
|
dev_err(adap, "bad SGE FL large MTU %d\n",
|
|
fl_large_mtu);
|
|
err = -EINVAL;
|
|
}
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* Retrieve our RX interrupt holdoff timer values and counter
|
|
* threshold values from the SGE parameters.
|
|
*/
|
|
timer_value_0_and_1 = t4_read_reg(adap, A_SGE_TIMER_VALUE_0_AND_1);
|
|
timer_value_2_and_3 = t4_read_reg(adap, A_SGE_TIMER_VALUE_2_AND_3);
|
|
timer_value_4_and_5 = t4_read_reg(adap, A_SGE_TIMER_VALUE_4_AND_5);
|
|
s->timer_val[0] = core_ticks_to_us(adap,
|
|
G_TIMERVALUE0(timer_value_0_and_1));
|
|
s->timer_val[1] = core_ticks_to_us(adap,
|
|
G_TIMERVALUE1(timer_value_0_and_1));
|
|
s->timer_val[2] = core_ticks_to_us(adap,
|
|
G_TIMERVALUE2(timer_value_2_and_3));
|
|
s->timer_val[3] = core_ticks_to_us(adap,
|
|
G_TIMERVALUE3(timer_value_2_and_3));
|
|
s->timer_val[4] = core_ticks_to_us(adap,
|
|
G_TIMERVALUE4(timer_value_4_and_5));
|
|
s->timer_val[5] = core_ticks_to_us(adap,
|
|
G_TIMERVALUE5(timer_value_4_and_5));
|
|
|
|
ingress_rx_threshold = t4_read_reg(adap, A_SGE_INGRESS_RX_THRESHOLD);
|
|
s->counter_val[0] = G_THRESHOLD_0(ingress_rx_threshold);
|
|
s->counter_val[1] = G_THRESHOLD_1(ingress_rx_threshold);
|
|
s->counter_val[2] = G_THRESHOLD_2(ingress_rx_threshold);
|
|
s->counter_val[3] = G_THRESHOLD_3(ingress_rx_threshold);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int t4_sge_init(struct adapter *adap)
|
|
{
|
|
struct sge *s = &adap->sge;
|
|
u32 sge_control, sge_conm_ctrl;
|
|
int ret, egress_threshold;
|
|
|
|
/*
|
|
* Ingress Padding Boundary and Egress Status Page Size are set up by
|
|
* t4_fixup_host_params().
|
|
*/
|
|
sge_control = t4_read_reg(adap, A_SGE_CONTROL);
|
|
s->pktshift = G_PKTSHIFT(sge_control);
|
|
s->stat_len = (sge_control & F_EGRSTATUSPAGESIZE) ? 128 : 64;
|
|
s->fl_align = t4_fl_pkt_align(adap);
|
|
ret = t4_sge_init_soft(adap);
|
|
if (ret < 0) {
|
|
dev_err(adap, "%s: t4_sge_init_soft failed, error %d\n",
|
|
__func__, -ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* A FL with <= fl_starve_thres buffers is starving and a periodic
|
|
* timer will attempt to refill it. This needs to be larger than the
|
|
* SGE's Egress Congestion Threshold. If it isn't, then we can get
|
|
* stuck waiting for new packets while the SGE is waiting for us to
|
|
* give it more Free List entries. (Note that the SGE's Egress
|
|
* Congestion Threshold is in units of 2 Free List pointers.) For T4,
|
|
* there was only a single field to control this. For T5 there's the
|
|
* original field which now only applies to Unpacked Mode Free List
|
|
* buffers and a new field which only applies to Packed Mode Free List
|
|
* buffers.
|
|
*/
|
|
sge_conm_ctrl = t4_read_reg(adap, A_SGE_CONM_CTRL);
|
|
if (is_t4(adap->params.chip) || adap->use_unpacked_mode)
|
|
egress_threshold = G_EGRTHRESHOLD(sge_conm_ctrl);
|
|
else
|
|
egress_threshold = G_EGRTHRESHOLDPACKING(sge_conm_ctrl);
|
|
s->fl_starve_thres = 2 * egress_threshold + 1;
|
|
|
|
return 0;
|
|
}
|