f2ef6f21ee
Adding call to mac_address_slaves_update from the lsc handler when the first slave become active to propagate any mac changes made while devices are inactive Changed removing slave logic to use memmove instead of memcpy to move data within the same array, as this was corrupting the slave array. Adding unit test to cover failing assignment scenarios Test report: http://dpdk.org/ml/archives/dev/2014-December/009623.html Signed-off-by: Declan Doherty <declan.doherty@intel.com> Acked-by: Pawel Wodkowski <pawelx.wodkowski@intel.com> Tested-by: SunX Jiajia <sunx.jiajia@intel.com>
4622 lines
157 KiB
C
4622 lines
157 KiB
C
/*-
|
|
* BSD LICENSE
|
|
*
|
|
* Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* * Neither the name of Intel Corporation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include "unistd.h"
|
|
#include <string.h>
|
|
#include <stdarg.h>
|
|
#include <stdio.h>
|
|
#include <stdlib.h>
|
|
#include <stdint.h>
|
|
#include <inttypes.h>
|
|
#include <errno.h>
|
|
#include <sys/queue.h>
|
|
#include <sys/time.h>
|
|
#include <rte_cycles.h>
|
|
#include <rte_byteorder.h>
|
|
#include <rte_common.h>
|
|
#include <rte_debug.h>
|
|
#include <rte_ethdev.h>
|
|
#include <rte_log.h>
|
|
#include <rte_lcore.h>
|
|
#include <rte_memory.h>
|
|
#include <rte_string_fns.h>
|
|
#include <rte_eth_bond.h>
|
|
|
|
#include "virtual_pmd.h"
|
|
#include "packet_burst_generator.h"
|
|
|
|
#include "test.h"
|
|
|
|
#define TEST_MAX_NUMBER_OF_PORTS (16)
|
|
|
|
#define RX_RING_SIZE 128
|
|
#define RX_FREE_THRESH 32
|
|
#define RX_PTHRESH 8
|
|
#define RX_HTHRESH 8
|
|
#define RX_WTHRESH 0
|
|
|
|
#define TX_RING_SIZE 512
|
|
#define TX_FREE_THRESH 32
|
|
#define TX_PTHRESH 32
|
|
#define TX_HTHRESH 0
|
|
#define TX_WTHRESH 0
|
|
#define TX_RSBIT_THRESH 32
|
|
#define TX_Q_FLAGS (ETH_TXQ_FLAGS_NOMULTSEGS | ETH_TXQ_FLAGS_NOVLANOFFL |\
|
|
ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP | \
|
|
ETH_TXQ_FLAGS_NOXSUMTCP)
|
|
|
|
#define MBUF_PAYLOAD_SIZE (2048)
|
|
#define MBUF_SIZE (MBUF_PAYLOAD_SIZE + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
|
|
#define MBUF_CACHE_SIZE (250)
|
|
#define BURST_SIZE (32)
|
|
|
|
#define DEFAULT_MBUF_DATA_SIZE (2048)
|
|
#define RTE_TEST_RX_DESC_MAX (2048)
|
|
#define RTE_TEST_TX_DESC_MAX (2048)
|
|
#define MAX_PKT_BURST (512)
|
|
#define DEF_PKT_BURST (16)
|
|
|
|
#define BONDED_DEV_NAME ("unit_test_bonded_device")
|
|
|
|
#define INVALID_SOCKET_ID (-1)
|
|
#define INVALID_PORT_ID (-1)
|
|
#define INVALID_BONDING_MODE (-1)
|
|
|
|
|
|
uint8_t slave_mac[] = {0x00, 0xFF, 0x00, 0xFF, 0x00, 0x00 };
|
|
uint8_t bonded_mac[] = {0xAA, 0xFF, 0xAA, 0xFF, 0xAA, 0xFF };
|
|
|
|
struct link_bonding_unittest_params {
|
|
int8_t bonded_port_id;
|
|
int8_t slave_port_ids[TEST_MAX_NUMBER_OF_PORTS];
|
|
uint8_t bonded_slave_count;
|
|
uint8_t bonding_mode;
|
|
|
|
uint16_t nb_rx_q;
|
|
uint16_t nb_tx_q;
|
|
|
|
struct rte_mempool *mbuf_pool;
|
|
|
|
struct ether_addr *default_slave_mac;
|
|
struct ether_addr *default_bonded_mac;
|
|
|
|
/* Packet Headers */
|
|
struct ether_hdr *pkt_eth_hdr;
|
|
struct ipv4_hdr *pkt_ipv4_hdr;
|
|
struct ipv6_hdr *pkt_ipv6_hdr;
|
|
struct udp_hdr *pkt_udp_hdr;
|
|
|
|
};
|
|
|
|
static struct ipv4_hdr pkt_ipv4_hdr;
|
|
static struct ipv6_hdr pkt_ipv6_hdr;
|
|
static struct udp_hdr pkt_udp_hdr;
|
|
|
|
static struct link_bonding_unittest_params default_params = {
|
|
.bonded_port_id = -1,
|
|
.slave_port_ids = { -1 },
|
|
.bonded_slave_count = 0,
|
|
.bonding_mode = BONDING_MODE_ROUND_ROBIN,
|
|
|
|
.nb_rx_q = 1,
|
|
.nb_tx_q = 1,
|
|
|
|
.mbuf_pool = NULL,
|
|
|
|
.default_slave_mac = (struct ether_addr *)slave_mac,
|
|
.default_bonded_mac = (struct ether_addr *)bonded_mac,
|
|
|
|
.pkt_eth_hdr = NULL,
|
|
.pkt_ipv4_hdr = &pkt_ipv4_hdr,
|
|
.pkt_ipv6_hdr = &pkt_ipv6_hdr,
|
|
.pkt_udp_hdr = &pkt_udp_hdr
|
|
|
|
};
|
|
|
|
static struct link_bonding_unittest_params *test_params = &default_params;
|
|
|
|
static uint8_t src_mac[] = { 0xFF, 0xAA, 0xFF, 0xAA, 0xFF, 0xAA };
|
|
static uint8_t dst_mac_0[] = { 0xFF, 0xAA, 0xFF, 0xAA, 0xFF, 0xAA };
|
|
static uint8_t dst_mac_1[] = { 0xFF, 0xAA, 0xFF, 0xAA, 0xFF, 0xAB };
|
|
|
|
static uint32_t src_addr = IPV4_ADDR(192, 168, 1, 98);
|
|
static uint32_t dst_addr_0 = IPV4_ADDR(192, 168, 1, 98);
|
|
static uint32_t dst_addr_1 = IPV4_ADDR(193, 166, 10, 97);
|
|
|
|
static uint8_t src_ipv6_addr[] = { 0xFF, 0xAA, 0xFF, 0xAA, 0xFF, 0xAA, 0xFF,
|
|
0xAA, 0xFF, 0xAA, 0xFF, 0xAA, 0xFF, 0xAA , 0xFF, 0xAA };
|
|
static uint8_t dst_ipv6_addr_0[] = { 0xFF, 0xAA, 0xFF, 0xAA, 0xFF, 0xAA, 0xFF,
|
|
0xAA, 0xFF, 0xAA, 0xFF, 0xAA , 0xFF, 0xAA, 0xFF, 0xAA };
|
|
static uint8_t dst_ipv6_addr_1[] = { 0xFF, 0xAA, 0xFF, 0xAA, 0xFF, 0xAA, 0xFF,
|
|
0xAA, 0xFF, 0xAA, 0xFF, 0xAA , 0xFF, 0xAA , 0xFF, 0xAB };
|
|
|
|
static uint16_t src_port = 1024;
|
|
static uint16_t dst_port_0 = 1024;
|
|
static uint16_t dst_port_1 = 2024;
|
|
|
|
static uint16_t vlan_id = 0x100;
|
|
|
|
struct rte_eth_rxmode rx_mode = {
|
|
.max_rx_pkt_len = ETHER_MAX_LEN, /**< Default maximum frame length. */
|
|
.split_hdr_size = 0,
|
|
.header_split = 0, /**< Header Split disabled. */
|
|
.hw_ip_checksum = 0, /**< IP checksum offload disabled. */
|
|
.hw_vlan_filter = 1, /**< VLAN filtering enabled. */
|
|
.hw_vlan_strip = 1, /**< VLAN strip enabled. */
|
|
.hw_vlan_extend = 0, /**< Extended VLAN disabled. */
|
|
.jumbo_frame = 0, /**< Jumbo Frame Support disabled. */
|
|
.hw_strip_crc = 0, /**< CRC stripping by hardware disabled. */
|
|
};
|
|
|
|
struct rte_fdir_conf fdir_conf = {
|
|
.mode = RTE_FDIR_MODE_NONE,
|
|
.pballoc = RTE_FDIR_PBALLOC_64K,
|
|
.status = RTE_FDIR_REPORT_STATUS,
|
|
.flexbytes_offset = 0x6,
|
|
.drop_queue = 127,
|
|
};
|
|
|
|
static struct rte_eth_conf default_pmd_conf = {
|
|
.rxmode = {
|
|
.mq_mode = ETH_MQ_RX_NONE,
|
|
.max_rx_pkt_len = ETHER_MAX_LEN,
|
|
.split_hdr_size = 0,
|
|
.header_split = 0, /**< Header Split disabled */
|
|
.hw_ip_checksum = 0, /**< IP checksum offload enabled */
|
|
.hw_vlan_filter = 0, /**< VLAN filtering disabled */
|
|
.jumbo_frame = 0, /**< Jumbo Frame Support disabled */
|
|
.hw_strip_crc = 0, /**< CRC stripped by hardware */
|
|
},
|
|
.txmode = {
|
|
.mq_mode = ETH_MQ_TX_NONE,
|
|
},
|
|
.lpbk_mode = 0,
|
|
};
|
|
|
|
static const struct rte_eth_rxconf rx_conf_default = {
|
|
.rx_thresh = {
|
|
.pthresh = RX_PTHRESH,
|
|
.hthresh = RX_HTHRESH,
|
|
.wthresh = RX_WTHRESH,
|
|
},
|
|
.rx_free_thresh = RX_FREE_THRESH,
|
|
.rx_drop_en = 0,
|
|
};
|
|
|
|
static struct rte_eth_txconf tx_conf_default = {
|
|
.tx_thresh = {
|
|
.pthresh = TX_PTHRESH,
|
|
.hthresh = TX_HTHRESH,
|
|
.wthresh = TX_WTHRESH,
|
|
},
|
|
.tx_free_thresh = TX_FREE_THRESH,
|
|
.tx_rs_thresh = TX_RSBIT_THRESH,
|
|
.txq_flags = TX_Q_FLAGS
|
|
|
|
};
|
|
|
|
static int
|
|
configure_ethdev(uint8_t port_id, uint8_t start, uint8_t en_isr)
|
|
{
|
|
int q_id;
|
|
|
|
if (en_isr)
|
|
default_pmd_conf.intr_conf.lsc = 1;
|
|
else
|
|
default_pmd_conf.intr_conf.lsc = 0;
|
|
|
|
TEST_ASSERT_SUCCESS(rte_eth_dev_configure(port_id, test_params->nb_rx_q,
|
|
test_params->nb_tx_q, &default_pmd_conf),
|
|
"rte_eth_dev_configure for port %d failed", port_id);
|
|
|
|
for (q_id = 0; q_id < test_params->nb_rx_q; q_id++)
|
|
TEST_ASSERT_SUCCESS(rte_eth_rx_queue_setup(port_id, q_id, RX_RING_SIZE,
|
|
rte_eth_dev_socket_id(port_id), &rx_conf_default,
|
|
test_params->mbuf_pool) ,
|
|
"rte_eth_rx_queue_setup for port %d failed", port_id);
|
|
|
|
for (q_id = 0; q_id < test_params->nb_tx_q; q_id++)
|
|
TEST_ASSERT_SUCCESS(rte_eth_tx_queue_setup(port_id, q_id, TX_RING_SIZE,
|
|
rte_eth_dev_socket_id(port_id), &tx_conf_default),
|
|
"rte_eth_tx_queue_setup for port %d failed", port_id);
|
|
|
|
if (start)
|
|
TEST_ASSERT_SUCCESS(rte_eth_dev_start(port_id),
|
|
"rte_eth_dev_start for port %d failed", port_id);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int slaves_initialized;
|
|
|
|
static pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER;
|
|
static pthread_cond_t cvar = PTHREAD_COND_INITIALIZER;
|
|
|
|
|
|
static int
|
|
test_setup(void)
|
|
{
|
|
int i, nb_mbuf_per_pool;
|
|
struct ether_addr *mac_addr = (struct ether_addr *)slave_mac;
|
|
|
|
/* Allocate ethernet packet header with space for VLAN header */
|
|
if (test_params->pkt_eth_hdr == NULL) {
|
|
test_params->pkt_eth_hdr = malloc(sizeof(struct ether_hdr) +
|
|
sizeof(struct vlan_hdr));
|
|
|
|
TEST_ASSERT_NOT_NULL(test_params->pkt_eth_hdr,
|
|
"Ethernet header struct allocation failed!");
|
|
}
|
|
|
|
nb_mbuf_per_pool = RTE_TEST_RX_DESC_MAX + DEF_PKT_BURST +
|
|
RTE_TEST_TX_DESC_MAX + MAX_PKT_BURST;
|
|
if (test_params->mbuf_pool == NULL) {
|
|
test_params->mbuf_pool = rte_mempool_create("MBUF_POOL", nb_mbuf_per_pool,
|
|
MBUF_SIZE, MBUF_CACHE_SIZE, sizeof(struct rte_pktmbuf_pool_private),
|
|
rte_pktmbuf_pool_init, NULL, rte_pktmbuf_init, NULL,
|
|
rte_socket_id(), 0);
|
|
TEST_ASSERT_NOT_NULL(test_params->mbuf_pool,
|
|
"rte_mempool_create failed");
|
|
}
|
|
|
|
/* Create / Initialize virtual eth devs */
|
|
if (!slaves_initialized) {
|
|
for (i = 0; i < TEST_MAX_NUMBER_OF_PORTS; i++) {
|
|
char pmd_name[RTE_ETH_NAME_MAX_LEN];
|
|
|
|
mac_addr->addr_bytes[ETHER_ADDR_LEN-1] = i;
|
|
|
|
snprintf(pmd_name, RTE_ETH_NAME_MAX_LEN, "eth_virt_%d", i);
|
|
|
|
test_params->slave_port_ids[i] = virtual_ethdev_create(pmd_name,
|
|
mac_addr, rte_socket_id(), 1);
|
|
TEST_ASSERT(test_params->slave_port_ids[i] >= 0,
|
|
"Failed to create virtual virtual ethdev %s", pmd_name);
|
|
|
|
TEST_ASSERT_SUCCESS(configure_ethdev(
|
|
test_params->slave_port_ids[i], 1, 0),
|
|
"Failed to configure virtual ethdev %s", pmd_name);
|
|
}
|
|
slaves_initialized = 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
test_create_bonded_device(void)
|
|
{
|
|
int current_slave_count;
|
|
|
|
uint8_t slaves[RTE_MAX_ETHPORTS];
|
|
|
|
/* Don't try to recreate bonded device if re-running test suite*/
|
|
if (test_params->bonded_port_id == -1) {
|
|
test_params->bonded_port_id = rte_eth_bond_create(BONDED_DEV_NAME,
|
|
test_params->bonding_mode, rte_socket_id());
|
|
|
|
TEST_ASSERT(test_params->bonded_port_id >= 0,
|
|
"Failed to create bonded ethdev %s", BONDED_DEV_NAME);
|
|
|
|
TEST_ASSERT_SUCCESS(configure_ethdev(test_params->bonded_port_id, 0, 0),
|
|
"Failed to configure bonded ethdev %s", BONDED_DEV_NAME);
|
|
}
|
|
|
|
TEST_ASSERT_SUCCESS(rte_eth_bond_mode_set(test_params->bonded_port_id,
|
|
test_params->bonding_mode), "Failed to set ethdev %d to mode %d",
|
|
test_params->bonded_port_id, test_params->bonding_mode);
|
|
|
|
current_slave_count = rte_eth_bond_slaves_get(test_params->bonded_port_id,
|
|
slaves, RTE_MAX_ETHPORTS);
|
|
|
|
TEST_ASSERT_EQUAL(current_slave_count, 0,
|
|
"Number of slaves %d is great than expected %d.",
|
|
current_slave_count, 0);
|
|
|
|
current_slave_count = rte_eth_bond_active_slaves_get(
|
|
test_params->bonded_port_id, slaves, RTE_MAX_ETHPORTS);
|
|
|
|
TEST_ASSERT_EQUAL(current_slave_count, 0,
|
|
"Number of active slaves %d is great than expected %d.",
|
|
current_slave_count, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int
|
|
test_create_bonded_device_with_invalid_params(void)
|
|
{
|
|
int port_id;
|
|
|
|
test_params->bonding_mode = BONDING_MODE_ROUND_ROBIN;
|
|
|
|
/* Invalid name */
|
|
port_id = rte_eth_bond_create(NULL, test_params->bonding_mode,
|
|
rte_socket_id());
|
|
TEST_ASSERT(port_id < 0, "Created bonded device unexpectedly");
|
|
|
|
test_params->bonding_mode = INVALID_BONDING_MODE;
|
|
|
|
/* Invalid bonding mode */
|
|
port_id = rte_eth_bond_create(BONDED_DEV_NAME, test_params->bonding_mode,
|
|
rte_socket_id());
|
|
TEST_ASSERT(port_id < 0, "Created bonded device unexpectedly.");
|
|
|
|
test_params->bonding_mode = BONDING_MODE_ROUND_ROBIN;
|
|
|
|
/* Invalid socket id */
|
|
port_id = rte_eth_bond_create(BONDED_DEV_NAME, test_params->bonding_mode,
|
|
INVALID_SOCKET_ID);
|
|
TEST_ASSERT(port_id < 0, "Created bonded device unexpectedly.");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
test_add_slave_to_bonded_device(void)
|
|
{
|
|
int current_slave_count;
|
|
|
|
uint8_t slaves[RTE_MAX_ETHPORTS];
|
|
|
|
TEST_ASSERT_SUCCESS(rte_eth_bond_slave_add(test_params->bonded_port_id,
|
|
test_params->slave_port_ids[test_params->bonded_slave_count]),
|
|
"Failed to add slave (%d) to bonded port (%d).",
|
|
test_params->slave_port_ids[test_params->bonded_slave_count],
|
|
test_params->bonded_port_id);
|
|
|
|
current_slave_count = rte_eth_bond_slaves_get(test_params->bonded_port_id,
|
|
slaves, RTE_MAX_ETHPORTS);
|
|
TEST_ASSERT_EQUAL(current_slave_count, test_params->bonded_slave_count + 1,
|
|
"Number of slaves (%d) is greater than expected (%d).",
|
|
current_slave_count, test_params->bonded_slave_count + 1);
|
|
|
|
current_slave_count = rte_eth_bond_active_slaves_get(
|
|
test_params->bonded_port_id, slaves, RTE_MAX_ETHPORTS);
|
|
TEST_ASSERT_EQUAL(current_slave_count, 0,
|
|
"Number of active slaves (%d) is not as expected (%d).\n",
|
|
current_slave_count, 0);
|
|
|
|
test_params->bonded_slave_count++;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
test_add_slave_to_invalid_bonded_device(void)
|
|
{
|
|
/* Invalid port ID */
|
|
TEST_ASSERT_FAIL(rte_eth_bond_slave_add(test_params->bonded_port_id + 5,
|
|
test_params->slave_port_ids[test_params->bonded_slave_count]),
|
|
"Expected call to failed as invalid port specified.");
|
|
|
|
/* Non bonded device */
|
|
TEST_ASSERT_FAIL(rte_eth_bond_slave_add(test_params->slave_port_ids[0],
|
|
test_params->slave_port_ids[test_params->bonded_slave_count]),
|
|
"Expected call to failed as invalid port specified.");
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int
|
|
test_remove_slave_from_bonded_device(void)
|
|
{
|
|
int current_slave_count;
|
|
struct ether_addr read_mac_addr, *mac_addr;
|
|
uint8_t slaves[RTE_MAX_ETHPORTS];
|
|
|
|
TEST_ASSERT_SUCCESS(rte_eth_bond_slave_remove(test_params->bonded_port_id,
|
|
test_params->slave_port_ids[test_params->bonded_slave_count-1]),
|
|
"Failed to remove slave %d from bonded port (%d).",
|
|
test_params->slave_port_ids[test_params->bonded_slave_count-1],
|
|
test_params->bonded_port_id);
|
|
|
|
|
|
current_slave_count = rte_eth_bond_slaves_get(test_params->bonded_port_id,
|
|
slaves, RTE_MAX_ETHPORTS);
|
|
|
|
TEST_ASSERT_EQUAL(current_slave_count, test_params->bonded_slave_count - 1,
|
|
"Number of slaves (%d) is great than expected (%d).\n",
|
|
current_slave_count, test_params->bonded_slave_count - 1);
|
|
|
|
|
|
mac_addr = (struct ether_addr *)slave_mac;
|
|
mac_addr->addr_bytes[ETHER_ADDR_LEN-1] =
|
|
test_params->bonded_slave_count-1;
|
|
|
|
rte_eth_macaddr_get(
|
|
test_params->slave_port_ids[test_params->bonded_slave_count-1],
|
|
&read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(mac_addr, &read_mac_addr, sizeof(read_mac_addr)),
|
|
"bonded port mac address not set to that of primary port\n");
|
|
|
|
rte_eth_stats_reset(
|
|
test_params->slave_port_ids[test_params->bonded_slave_count-1]);
|
|
|
|
virtual_ethdev_simulate_link_status_interrupt(test_params->bonded_port_id,
|
|
0);
|
|
|
|
test_params->bonded_slave_count--;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
test_remove_slave_from_invalid_bonded_device(void)
|
|
{
|
|
/* Invalid port ID */
|
|
TEST_ASSERT_FAIL(rte_eth_bond_slave_remove(
|
|
test_params->bonded_port_id + 5,
|
|
test_params->slave_port_ids[test_params->bonded_slave_count - 1]),
|
|
"Expected call to failed as invalid port specified.");
|
|
|
|
/* Non bonded device */
|
|
TEST_ASSERT_FAIL(rte_eth_bond_slave_remove(
|
|
test_params->slave_port_ids[0],
|
|
test_params->slave_port_ids[test_params->bonded_slave_count - 1]),
|
|
"Expected call to failed as invalid port specified.");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bonded_id = 2;
|
|
|
|
static int
|
|
test_add_already_bonded_slave_to_bonded_device(void)
|
|
{
|
|
int port_id, current_slave_count;
|
|
uint8_t slaves[RTE_MAX_ETHPORTS];
|
|
char pmd_name[RTE_ETH_NAME_MAX_LEN];
|
|
|
|
test_add_slave_to_bonded_device();
|
|
|
|
current_slave_count = rte_eth_bond_slaves_get(test_params->bonded_port_id,
|
|
slaves, RTE_MAX_ETHPORTS);
|
|
TEST_ASSERT_EQUAL(current_slave_count, 1,
|
|
"Number of slaves (%d) is not that expected (%d).",
|
|
current_slave_count, 1);
|
|
|
|
snprintf(pmd_name, RTE_ETH_NAME_MAX_LEN, "%s_%d", BONDED_DEV_NAME, ++bonded_id);
|
|
|
|
port_id = rte_eth_bond_create(pmd_name, test_params->bonding_mode,
|
|
rte_socket_id());
|
|
TEST_ASSERT(port_id >= 0, "Failed to create bonded device.");
|
|
|
|
TEST_ASSERT(rte_eth_bond_slave_add(port_id,
|
|
test_params->slave_port_ids[test_params->bonded_slave_count - 1])
|
|
< 0,
|
|
"Added slave (%d) to bonded port (%d) unexpectedly.",
|
|
test_params->slave_port_ids[test_params->bonded_slave_count-1],
|
|
port_id);
|
|
|
|
return test_remove_slave_from_bonded_device();
|
|
}
|
|
|
|
|
|
static int
|
|
test_get_slaves_from_bonded_device(void)
|
|
{
|
|
int current_slave_count;
|
|
uint8_t slaves[RTE_MAX_ETHPORTS];
|
|
|
|
TEST_ASSERT_SUCCESS(test_add_slave_to_bonded_device(),
|
|
"Failed to add slave to bonded device");
|
|
|
|
/* Invalid port id */
|
|
current_slave_count = rte_eth_bond_slaves_get(INVALID_PORT_ID, slaves,
|
|
RTE_MAX_ETHPORTS);
|
|
TEST_ASSERT(current_slave_count < 0,
|
|
"Invalid port id unexpectedly succeeded");
|
|
|
|
current_slave_count = rte_eth_bond_active_slaves_get(INVALID_PORT_ID,
|
|
slaves, RTE_MAX_ETHPORTS);
|
|
TEST_ASSERT(current_slave_count < 0,
|
|
"Invalid port id unexpectedly succeeded");
|
|
|
|
/* Invalid slaves pointer */
|
|
current_slave_count = rte_eth_bond_slaves_get(test_params->bonded_port_id,
|
|
NULL, RTE_MAX_ETHPORTS);
|
|
TEST_ASSERT(current_slave_count < 0,
|
|
"Invalid slave array unexpectedly succeeded");
|
|
|
|
current_slave_count = rte_eth_bond_active_slaves_get(
|
|
test_params->bonded_port_id, NULL, RTE_MAX_ETHPORTS);
|
|
TEST_ASSERT(current_slave_count < 0,
|
|
"Invalid slave array unexpectedly succeeded");
|
|
|
|
/* non bonded device*/
|
|
current_slave_count = rte_eth_bond_slaves_get(
|
|
test_params->slave_port_ids[0], NULL, RTE_MAX_ETHPORTS);
|
|
TEST_ASSERT(current_slave_count < 0,
|
|
"Invalid port id unexpectedly succeeded");
|
|
|
|
current_slave_count = rte_eth_bond_active_slaves_get(
|
|
test_params->slave_port_ids[0], NULL, RTE_MAX_ETHPORTS);
|
|
TEST_ASSERT(current_slave_count < 0,
|
|
"Invalid port id unexpectedly succeeded");
|
|
|
|
TEST_ASSERT_SUCCESS(test_remove_slave_from_bonded_device(),
|
|
"Failed to remove slaves from bonded device");
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int
|
|
test_add_remove_multiple_slaves_to_from_bonded_device(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < TEST_MAX_NUMBER_OF_PORTS; i++)
|
|
TEST_ASSERT_SUCCESS(test_add_slave_to_bonded_device(),
|
|
"Failed to add slave to bonded device");
|
|
|
|
for (i = 0; i < TEST_MAX_NUMBER_OF_PORTS; i++)
|
|
TEST_ASSERT_SUCCESS(test_remove_slave_from_bonded_device(),
|
|
"Failed to remove slaves from bonded device");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
enable_bonded_slaves(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < test_params->bonded_slave_count; i++) {
|
|
virtual_ethdev_tx_burst_fn_set_success(test_params->slave_port_ids[i],
|
|
1);
|
|
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[i], 1);
|
|
}
|
|
}
|
|
|
|
static int
|
|
test_start_bonded_device(void)
|
|
{
|
|
struct rte_eth_link link_status;
|
|
|
|
int current_slave_count, current_bonding_mode, primary_port;
|
|
uint8_t slaves[RTE_MAX_ETHPORTS];
|
|
|
|
/* Add slave to bonded device*/
|
|
TEST_ASSERT_SUCCESS(test_add_slave_to_bonded_device(),
|
|
"Failed to add slave to bonded device");
|
|
|
|
TEST_ASSERT_SUCCESS(rte_eth_dev_start(test_params->bonded_port_id),
|
|
"Failed to start bonded pmd eth device %d.",
|
|
test_params->bonded_port_id);
|
|
|
|
/* Change link status of virtual pmd so it will be added to the active
|
|
* slave list of the bonded device*/
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[test_params->bonded_slave_count-1], 1);
|
|
|
|
current_slave_count = rte_eth_bond_slaves_get(test_params->bonded_port_id,
|
|
slaves, RTE_MAX_ETHPORTS);
|
|
TEST_ASSERT_EQUAL(current_slave_count, test_params->bonded_slave_count,
|
|
"Number of slaves (%d) is not expected value (%d).",
|
|
current_slave_count, test_params->bonded_slave_count);
|
|
|
|
current_slave_count = rte_eth_bond_active_slaves_get(
|
|
test_params->bonded_port_id, slaves, RTE_MAX_ETHPORTS);
|
|
TEST_ASSERT_EQUAL(current_slave_count, test_params->bonded_slave_count,
|
|
"Number of active slaves (%d) is not expected value (%d).",
|
|
current_slave_count, test_params->bonded_slave_count);
|
|
|
|
current_bonding_mode = rte_eth_bond_mode_get(test_params->bonded_port_id);
|
|
TEST_ASSERT_EQUAL(current_bonding_mode, test_params->bonding_mode,
|
|
"Bonded device mode (%d) is not expected value (%d).\n",
|
|
current_bonding_mode, test_params->bonding_mode);
|
|
|
|
primary_port = rte_eth_bond_primary_get(test_params->bonded_port_id);
|
|
TEST_ASSERT_EQUAL(primary_port, test_params->slave_port_ids[0],
|
|
"Primary port (%d) is not expected value (%d).",
|
|
primary_port, test_params->slave_port_ids[0]);
|
|
|
|
rte_eth_link_get(test_params->bonded_port_id, &link_status);
|
|
TEST_ASSERT_EQUAL(link_status.link_status, 1,
|
|
"Bonded port (%d) status (%d) is not expected value (%d).\n",
|
|
test_params->bonded_port_id, link_status.link_status, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
test_stop_bonded_device(void)
|
|
{
|
|
int current_slave_count;
|
|
uint8_t slaves[RTE_MAX_ETHPORTS];
|
|
|
|
struct rte_eth_link link_status;
|
|
|
|
rte_eth_dev_stop(test_params->bonded_port_id);
|
|
|
|
rte_eth_link_get(test_params->bonded_port_id, &link_status);
|
|
TEST_ASSERT_EQUAL(link_status.link_status, 0,
|
|
"Bonded port (%d) status (%d) is not expected value (%d).",
|
|
test_params->bonded_port_id, link_status.link_status, 0);
|
|
|
|
current_slave_count = rte_eth_bond_slaves_get(test_params->bonded_port_id,
|
|
slaves, RTE_MAX_ETHPORTS);
|
|
TEST_ASSERT_EQUAL(current_slave_count, test_params->bonded_slave_count,
|
|
"Number of slaves (%d) is not expected value (%d).",
|
|
current_slave_count, test_params->bonded_slave_count);
|
|
|
|
current_slave_count = rte_eth_bond_active_slaves_get(
|
|
test_params->bonded_port_id, slaves, RTE_MAX_ETHPORTS);
|
|
TEST_ASSERT_EQUAL(current_slave_count, 0,
|
|
"Number of active slaves (%d) is not expected value (%d).",
|
|
current_slave_count, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
remove_slaves_and_stop_bonded_device(void)
|
|
{
|
|
/* Clean up and remove slaves from bonded device */
|
|
while (test_params->bonded_slave_count > 0)
|
|
TEST_ASSERT_SUCCESS(test_remove_slave_from_bonded_device(),
|
|
"test_remove_slave_from_bonded_device failed");
|
|
|
|
rte_eth_dev_stop(test_params->bonded_port_id);
|
|
rte_eth_stats_reset(test_params->bonded_port_id);
|
|
rte_eth_bond_mac_address_reset(test_params->bonded_port_id);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
test_set_bonding_mode(void)
|
|
{
|
|
int i, bonding_mode;
|
|
|
|
int bonding_modes[] = { BONDING_MODE_ROUND_ROBIN,
|
|
BONDING_MODE_ACTIVE_BACKUP,
|
|
BONDING_MODE_BALANCE,
|
|
#ifdef RTE_MBUF_REFCNT
|
|
BONDING_MODE_BROADCAST
|
|
#endif
|
|
};
|
|
|
|
/* Test supported link bonding modes */
|
|
for (i = 0; i < (int)RTE_DIM(bonding_modes); i++) {
|
|
/* Invalid port ID */
|
|
TEST_ASSERT_FAIL(rte_eth_bond_mode_set(INVALID_PORT_ID,
|
|
bonding_modes[i]),
|
|
"Expected call to failed as invalid port (%d) specified.",
|
|
INVALID_PORT_ID);
|
|
|
|
/* Non bonded device */
|
|
TEST_ASSERT_FAIL(rte_eth_bond_mode_set(test_params->slave_port_ids[0],
|
|
bonding_modes[i]),
|
|
"Expected call to failed as invalid port (%d) specified.",
|
|
test_params->slave_port_ids[0]);
|
|
|
|
TEST_ASSERT_SUCCESS(rte_eth_bond_mode_set(test_params->bonded_port_id,
|
|
bonding_modes[i]),
|
|
"Failed to set link bonding mode on port (%d) to (%d).",
|
|
test_params->bonded_port_id, bonding_modes[i]);
|
|
|
|
bonding_mode = rte_eth_bond_mode_get(test_params->bonded_port_id);
|
|
TEST_ASSERT_EQUAL(bonding_mode, bonding_modes[i],
|
|
"Link bonding mode (%d) of port (%d) is not expected value (%d).",
|
|
bonding_mode, test_params->bonded_port_id,
|
|
bonding_modes[i]);
|
|
|
|
/* Invalid port ID */
|
|
bonding_mode = rte_eth_bond_mode_get(INVALID_PORT_ID);
|
|
TEST_ASSERT(bonding_mode < 0,
|
|
"Expected call to failed as invalid port (%d) specified.",
|
|
INVALID_PORT_ID);
|
|
|
|
/* Non bonded device */
|
|
bonding_mode = rte_eth_bond_mode_get(test_params->slave_port_ids[0]);
|
|
TEST_ASSERT(bonding_mode < 0,
|
|
"Expected call to failed as invalid port (%d) specified.",
|
|
test_params->slave_port_ids[0]);
|
|
}
|
|
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
|
|
static int
|
|
test_set_primary_slave(void)
|
|
{
|
|
int i, j, retval;
|
|
struct ether_addr read_mac_addr;
|
|
struct ether_addr *expected_mac_addr;
|
|
|
|
/* Add 4 slaves to bonded device */
|
|
for (i = test_params->bonded_slave_count; i < 4; i++)
|
|
TEST_ASSERT_SUCCESS(test_add_slave_to_bonded_device(),
|
|
"Failed to add slave to bonded device.");
|
|
|
|
TEST_ASSERT_SUCCESS(rte_eth_bond_mode_set(test_params->bonded_port_id,
|
|
BONDING_MODE_ROUND_ROBIN),
|
|
"Failed to set link bonding mode on port (%d) to (%d).",
|
|
test_params->bonded_port_id, BONDING_MODE_ROUND_ROBIN);
|
|
|
|
/* Invalid port ID */
|
|
TEST_ASSERT_FAIL(rte_eth_bond_primary_set(INVALID_PORT_ID,
|
|
test_params->slave_port_ids[i]),
|
|
"Expected call to failed as invalid port specified.");
|
|
|
|
/* Non bonded device */
|
|
TEST_ASSERT_FAIL(rte_eth_bond_primary_set(test_params->slave_port_ids[i],
|
|
test_params->slave_port_ids[i]),
|
|
"Expected call to failed as invalid port specified.");
|
|
|
|
/* Set slave as primary
|
|
* Verify slave it is now primary slave
|
|
* Verify that MAC address of bonded device is that of primary slave
|
|
* Verify that MAC address of all bonded slaves are that of primary slave
|
|
*/
|
|
for (i = 0; i < 4; i++) {
|
|
TEST_ASSERT_SUCCESS(rte_eth_bond_primary_set(test_params->bonded_port_id,
|
|
test_params->slave_port_ids[i]),
|
|
"Failed to set bonded port (%d) primary port to (%d)",
|
|
test_params->bonded_port_id, test_params->slave_port_ids[i]);
|
|
|
|
retval = rte_eth_bond_primary_get(test_params->bonded_port_id);
|
|
TEST_ASSERT(retval >= 0,
|
|
"Failed to read primary port from bonded port (%d)\n",
|
|
test_params->bonded_port_id);
|
|
|
|
TEST_ASSERT_EQUAL(retval, test_params->slave_port_ids[i],
|
|
"Bonded port (%d) primary port (%d) not expected value (%d)\n",
|
|
test_params->bonded_port_id, retval,
|
|
test_params->slave_port_ids[i]);
|
|
|
|
/* stop/start bonded eth dev to apply new MAC */
|
|
rte_eth_dev_stop(test_params->bonded_port_id);
|
|
|
|
TEST_ASSERT_SUCCESS(rte_eth_dev_start(test_params->bonded_port_id),
|
|
"Failed to start bonded port %d",
|
|
test_params->bonded_port_id);
|
|
|
|
expected_mac_addr = (struct ether_addr *)&slave_mac;
|
|
expected_mac_addr->addr_bytes[ETHER_ADDR_LEN-1] = i;
|
|
|
|
/* Check primary slave MAC */
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[i], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(expected_mac_addr, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"bonded port mac address not set to that of primary port\n");
|
|
|
|
/* Check bonded MAC */
|
|
rte_eth_macaddr_get(test_params->bonded_port_id, &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&read_mac_addr, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"bonded port mac address not set to that of primary port\n");
|
|
|
|
/* Check other slaves MACs */
|
|
for (j = 0; j < 4; j++) {
|
|
if (j != i) {
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[j],
|
|
&read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(expected_mac_addr, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port mac address not set to that of primary "
|
|
"port");
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/* Test with none existent port */
|
|
TEST_ASSERT_FAIL(rte_eth_bond_primary_get(test_params->bonded_port_id + 10),
|
|
"read primary port from expectedly");
|
|
|
|
/* Test with slave port */
|
|
TEST_ASSERT_FAIL(rte_eth_bond_primary_get(test_params->slave_port_ids[0]),
|
|
"read primary port from expectedly\n");
|
|
|
|
TEST_ASSERT_SUCCESS(remove_slaves_and_stop_bonded_device(),
|
|
"Failed to stop and remove slaves from bonded device");
|
|
|
|
/* No slaves */
|
|
TEST_ASSERT(rte_eth_bond_primary_get(test_params->bonded_port_id) < 0,
|
|
"read primary port from expectedly\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
test_set_explicit_bonded_mac(void)
|
|
{
|
|
int i;
|
|
struct ether_addr read_mac_addr;
|
|
struct ether_addr *mac_addr;
|
|
|
|
uint8_t explicit_bonded_mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0x00, 0x01 };
|
|
|
|
mac_addr = (struct ether_addr *)explicit_bonded_mac;
|
|
|
|
/* Invalid port ID */
|
|
TEST_ASSERT_FAIL(rte_eth_bond_mac_address_set(INVALID_PORT_ID, mac_addr),
|
|
"Expected call to failed as invalid port specified.");
|
|
|
|
/* Non bonded device */
|
|
TEST_ASSERT_FAIL(rte_eth_bond_mac_address_set(
|
|
test_params->slave_port_ids[0], mac_addr),
|
|
"Expected call to failed as invalid port specified.");
|
|
|
|
/* NULL MAC address */
|
|
TEST_ASSERT_FAIL(rte_eth_bond_mac_address_set(
|
|
test_params->bonded_port_id, NULL),
|
|
"Expected call to failed as NULL MAC specified");
|
|
|
|
TEST_ASSERT_SUCCESS(rte_eth_bond_mac_address_set(
|
|
test_params->bonded_port_id, mac_addr),
|
|
"Failed to set MAC address on bonded port (%d)",
|
|
test_params->bonded_port_id);
|
|
|
|
/* Add 4 slaves to bonded device */
|
|
for (i = test_params->bonded_slave_count; i < 4; i++) {
|
|
TEST_ASSERT_SUCCESS(test_add_slave_to_bonded_device(),
|
|
"Failed to add slave to bonded device.\n");
|
|
}
|
|
|
|
/* Check bonded MAC */
|
|
rte_eth_macaddr_get(test_params->bonded_port_id, &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(mac_addr, &read_mac_addr, sizeof(read_mac_addr)),
|
|
"bonded port mac address not set to that of primary port");
|
|
|
|
/* Check other slaves MACs */
|
|
for (i = 0; i < 4; i++) {
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[i], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(mac_addr, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port mac address not set to that of primary port");
|
|
}
|
|
|
|
/* test resetting mac address on bonded device */
|
|
TEST_ASSERT_SUCCESS(
|
|
rte_eth_bond_mac_address_reset(test_params->bonded_port_id),
|
|
"Failed to reset MAC address on bonded port (%d)",
|
|
test_params->bonded_port_id);
|
|
|
|
TEST_ASSERT_FAIL(
|
|
rte_eth_bond_mac_address_reset(test_params->slave_port_ids[0]),
|
|
"Reset MAC address on bonded port (%d) unexpectedly",
|
|
test_params->slave_port_ids[1]);
|
|
|
|
/* test resetting mac address on bonded device with no slaves */
|
|
TEST_ASSERT_SUCCESS(remove_slaves_and_stop_bonded_device(),
|
|
"Failed to remove slaves and stop bonded device");
|
|
|
|
TEST_ASSERT_SUCCESS(rte_eth_bond_mac_address_reset(test_params->bonded_port_id),
|
|
"Failed to reset MAC address on bonded port (%d)",
|
|
test_params->bonded_port_id);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define BONDED_INIT_MAC_ASSIGNMENT_SLAVE_COUNT (3)
|
|
|
|
static int
|
|
test_set_bonded_port_initialization_mac_assignment(void)
|
|
{
|
|
int i, slave_count, bonded_port_id;
|
|
|
|
uint8_t slaves[RTE_MAX_ETHPORTS];
|
|
int slave_port_ids[BONDED_INIT_MAC_ASSIGNMENT_SLAVE_COUNT];
|
|
|
|
struct ether_addr slave_mac_addr, bonded_mac_addr, read_mac_addr;
|
|
|
|
/* Initialize default values for MAC addresses */
|
|
memcpy(&slave_mac_addr, slave_mac, sizeof(struct ether_addr));
|
|
memcpy(&bonded_mac_addr, slave_mac, sizeof(struct ether_addr));
|
|
|
|
/*
|
|
* 1. a - Create / configure bonded / slave ethdevs
|
|
*/
|
|
bonded_port_id = rte_eth_bond_create("ethdev_bond_mac_ass_test",
|
|
BONDING_MODE_ACTIVE_BACKUP, rte_socket_id());
|
|
TEST_ASSERT(bonded_port_id > 0, "failed to create bonded device");
|
|
|
|
TEST_ASSERT_SUCCESS(configure_ethdev(bonded_port_id, 0, 0),
|
|
"Failed to configure bonded ethdev");
|
|
|
|
for (i = 0; i < BONDED_INIT_MAC_ASSIGNMENT_SLAVE_COUNT; i++) {
|
|
char pmd_name[RTE_ETH_NAME_MAX_LEN];
|
|
|
|
slave_mac_addr.addr_bytes[ETHER_ADDR_LEN-1] = i + 100;
|
|
|
|
snprintf(pmd_name, RTE_ETH_NAME_MAX_LEN, "eth_slave_%d", i);
|
|
|
|
slave_port_ids[i] = virtual_ethdev_create(pmd_name,
|
|
&slave_mac_addr, rte_socket_id(), 1);
|
|
|
|
TEST_ASSERT(slave_port_ids[i] >= 0,
|
|
"Failed to create slave ethdev %s", pmd_name);
|
|
|
|
TEST_ASSERT_SUCCESS(configure_ethdev(slave_port_ids[i], 1, 0),
|
|
"Failed to configure virtual ethdev %s",
|
|
pmd_name);
|
|
}
|
|
|
|
|
|
/*
|
|
* 2. Add slave ethdevs to bonded device
|
|
*/
|
|
for (i = 0; i < BONDED_INIT_MAC_ASSIGNMENT_SLAVE_COUNT; i++) {
|
|
TEST_ASSERT_SUCCESS(rte_eth_bond_slave_add(bonded_port_id,
|
|
slave_port_ids[i]),
|
|
"Failed to add slave (%d) to bonded port (%d).",
|
|
slave_port_ids[i], bonded_port_id);
|
|
}
|
|
|
|
slave_count = rte_eth_bond_slaves_get(bonded_port_id, slaves,
|
|
RTE_MAX_ETHPORTS);
|
|
TEST_ASSERT_EQUAL(BONDED_INIT_MAC_ASSIGNMENT_SLAVE_COUNT, slave_count,
|
|
"Number of slaves (%d) is not as expected (%d)",
|
|
slave_count, BONDED_INIT_MAC_ASSIGNMENT_SLAVE_COUNT);
|
|
|
|
|
|
/*
|
|
* 3. Set explicit MAC address on bonded ethdev
|
|
*/
|
|
bonded_mac_addr.addr_bytes[ETHER_ADDR_LEN-2] = 0xFF;
|
|
bonded_mac_addr.addr_bytes[ETHER_ADDR_LEN-1] = 0xAA;
|
|
|
|
TEST_ASSERT_SUCCESS(rte_eth_bond_mac_address_set(
|
|
bonded_port_id, &bonded_mac_addr),
|
|
"Failed to set MAC address on bonded port (%d)",
|
|
bonded_port_id);
|
|
|
|
|
|
/* 4. a - Start bonded ethdev
|
|
* b - Enable slave devices
|
|
* c - Verify bonded/slaves ethdev MAC addresses
|
|
*/
|
|
TEST_ASSERT_SUCCESS(rte_eth_dev_start(bonded_port_id),
|
|
"Failed to start bonded pmd eth device %d.",
|
|
bonded_port_id);
|
|
|
|
for (i = 0; i < BONDED_INIT_MAC_ASSIGNMENT_SLAVE_COUNT; i++) {
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
slave_port_ids[i], 1);
|
|
}
|
|
|
|
rte_eth_macaddr_get(bonded_port_id, &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&bonded_mac_addr, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"bonded port mac address not as expected");
|
|
|
|
rte_eth_macaddr_get(slave_port_ids[0], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&bonded_mac_addr, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port 0 mac address not as expected");
|
|
|
|
slave_mac_addr.addr_bytes[ETHER_ADDR_LEN-1] = 1 + 100;
|
|
rte_eth_macaddr_get(slave_port_ids[1], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&slave_mac_addr, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port 1 mac address not as expected");
|
|
|
|
slave_mac_addr.addr_bytes[ETHER_ADDR_LEN-1] = 2 + 100;
|
|
rte_eth_macaddr_get(slave_port_ids[2], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&slave_mac_addr, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port 2 mac address not as expected");
|
|
|
|
|
|
/* 7. a - Change primary port
|
|
* b - Stop / Start bonded port
|
|
* d - Verify slave ethdev MAC addresses
|
|
*/
|
|
TEST_ASSERT_SUCCESS(rte_eth_bond_primary_set(bonded_port_id,
|
|
slave_port_ids[2]),
|
|
"failed to set primary port on bonded device.");
|
|
|
|
rte_eth_dev_stop(bonded_port_id);
|
|
TEST_ASSERT_SUCCESS(rte_eth_dev_start(bonded_port_id),
|
|
"Failed to start bonded pmd eth device %d.",
|
|
bonded_port_id);
|
|
|
|
rte_eth_macaddr_get(bonded_port_id, &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&bonded_mac_addr, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"bonded port mac address not as expected");
|
|
|
|
slave_mac_addr.addr_bytes[ETHER_ADDR_LEN-1] = 0 + 100;
|
|
rte_eth_macaddr_get(slave_port_ids[0], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&slave_mac_addr, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port 0 mac address not as expected");
|
|
|
|
slave_mac_addr.addr_bytes[ETHER_ADDR_LEN-1] = 1 + 100;
|
|
rte_eth_macaddr_get(slave_port_ids[1], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&slave_mac_addr, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port 1 mac address not as expected");
|
|
|
|
rte_eth_macaddr_get(slave_port_ids[2], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&bonded_mac_addr, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port 2 mac address not as expected");
|
|
|
|
/* 6. a - Stop bonded ethdev
|
|
* b - remove slave ethdevs
|
|
* c - Verify slave ethdevs MACs are restored
|
|
*/
|
|
rte_eth_dev_stop(bonded_port_id);
|
|
|
|
for (i = 0; i < BONDED_INIT_MAC_ASSIGNMENT_SLAVE_COUNT; i++) {
|
|
TEST_ASSERT_SUCCESS(rte_eth_bond_slave_remove(bonded_port_id,
|
|
slave_port_ids[i]),
|
|
"Failed to remove slave %d from bonded port (%d).",
|
|
slave_port_ids[i], bonded_port_id);
|
|
}
|
|
|
|
slave_count = rte_eth_bond_slaves_get(bonded_port_id, slaves,
|
|
RTE_MAX_ETHPORTS);
|
|
|
|
TEST_ASSERT_EQUAL(slave_count, 0,
|
|
"Number of slaves (%d) is great than expected (%d).",
|
|
slave_count, 0);
|
|
|
|
slave_mac_addr.addr_bytes[ETHER_ADDR_LEN-1] = 0 + 100;
|
|
rte_eth_macaddr_get(slave_port_ids[0], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&slave_mac_addr, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port 0 mac address not as expected");
|
|
|
|
slave_mac_addr.addr_bytes[ETHER_ADDR_LEN-1] = 1 + 100;
|
|
rte_eth_macaddr_get(slave_port_ids[1], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&slave_mac_addr, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port 1 mac address not as expected");
|
|
|
|
slave_mac_addr.addr_bytes[ETHER_ADDR_LEN-1] = 2 + 100;
|
|
rte_eth_macaddr_get(slave_port_ids[2], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&slave_mac_addr, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port 2 mac address not as expected");
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int
|
|
initialize_bonded_device_with_slaves(uint8_t bonding_mode, uint8_t bond_en_isr,
|
|
uint8_t number_of_slaves, uint8_t enable_slave)
|
|
{
|
|
/* Configure bonded device */
|
|
TEST_ASSERT_SUCCESS(configure_ethdev(test_params->bonded_port_id, 0,
|
|
bond_en_isr), "Failed to configure bonding port (%d) in mode %d "
|
|
"with (%d) slaves.", test_params->bonded_port_id, bonding_mode,
|
|
number_of_slaves);
|
|
|
|
/* Add slaves to bonded device */
|
|
while (number_of_slaves > test_params->bonded_slave_count)
|
|
TEST_ASSERT_SUCCESS(test_add_slave_to_bonded_device(),
|
|
"Failed to add slave (%d to bonding port (%d).",
|
|
test_params->bonded_slave_count - 1,
|
|
test_params->bonded_port_id);
|
|
|
|
/* Set link bonding mode */
|
|
TEST_ASSERT_SUCCESS(rte_eth_bond_mode_set(test_params->bonded_port_id,
|
|
bonding_mode),
|
|
"Failed to set link bonding mode on port (%d) to (%d).",
|
|
test_params->bonded_port_id, bonding_mode);
|
|
|
|
TEST_ASSERT_SUCCESS(rte_eth_dev_start(test_params->bonded_port_id),
|
|
"Failed to start bonded pmd eth device %d.",
|
|
test_params->bonded_port_id);
|
|
|
|
if (enable_slave)
|
|
enable_bonded_slaves();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
test_adding_slave_after_bonded_device_started(void)
|
|
{
|
|
int i;
|
|
|
|
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
|
|
BONDING_MODE_ROUND_ROBIN, 0, 4, 0),
|
|
"Failed to add slaves to bonded device");
|
|
|
|
/* Enabled slave devices */
|
|
for (i = 0; i < test_params->bonded_slave_count + 1; i++) {
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[i], 1);
|
|
}
|
|
|
|
TEST_ASSERT_SUCCESS(rte_eth_bond_slave_add(test_params->bonded_port_id,
|
|
test_params->slave_port_ids[test_params->bonded_slave_count]),
|
|
"Failed to add slave to bonded port.\n");
|
|
|
|
rte_eth_stats_reset(
|
|
test_params->slave_port_ids[test_params->bonded_slave_count]);
|
|
|
|
test_params->bonded_slave_count++;
|
|
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
|
|
#define TEST_STATUS_INTERRUPT_SLAVE_COUNT 4
|
|
#define TEST_LSC_WAIT_TIMEOUT_MS 500
|
|
|
|
int test_lsc_interrupt_count;
|
|
|
|
|
|
static void
|
|
test_bonding_lsc_event_callback(uint8_t port_id __rte_unused,
|
|
enum rte_eth_event_type type __rte_unused, void *param __rte_unused)
|
|
{
|
|
pthread_mutex_lock(&mutex);
|
|
test_lsc_interrupt_count++;
|
|
|
|
pthread_cond_signal(&cvar);
|
|
pthread_mutex_unlock(&mutex);
|
|
}
|
|
|
|
static inline int
|
|
lsc_timeout(int wait_us)
|
|
{
|
|
int retval = 0;
|
|
|
|
struct timespec ts;
|
|
struct timeval tp;
|
|
|
|
gettimeofday(&tp, NULL);
|
|
|
|
/* Convert from timeval to timespec */
|
|
ts.tv_sec = tp.tv_sec;
|
|
ts.tv_nsec = tp.tv_usec * 1000;
|
|
ts.tv_nsec += wait_us * 1000;
|
|
|
|
pthread_mutex_lock(&mutex);
|
|
if (test_lsc_interrupt_count < 1)
|
|
retval = pthread_cond_timedwait(&cvar, &mutex, &ts);
|
|
|
|
pthread_mutex_unlock(&mutex);
|
|
|
|
if (retval == 0 && test_lsc_interrupt_count < 1)
|
|
return -1;
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int
|
|
test_status_interrupt(void)
|
|
{
|
|
int slave_count;
|
|
uint8_t slaves[RTE_MAX_ETHPORTS];
|
|
|
|
/* initialized bonding device with T slaves */
|
|
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
|
|
BONDING_MODE_ROUND_ROBIN, 1,
|
|
TEST_STATUS_INTERRUPT_SLAVE_COUNT, 1),
|
|
"Failed to initialise bonded device");
|
|
|
|
test_lsc_interrupt_count = 0;
|
|
|
|
/* register link status change interrupt callback */
|
|
rte_eth_dev_callback_register(test_params->bonded_port_id,
|
|
RTE_ETH_EVENT_INTR_LSC, test_bonding_lsc_event_callback,
|
|
&test_params->bonded_port_id);
|
|
|
|
slave_count = rte_eth_bond_active_slaves_get(test_params->bonded_port_id,
|
|
slaves, RTE_MAX_ETHPORTS);
|
|
|
|
TEST_ASSERT_EQUAL(slave_count, TEST_STATUS_INTERRUPT_SLAVE_COUNT,
|
|
"Number of active slaves (%d) is not as expected (%d)",
|
|
slave_count, TEST_STATUS_INTERRUPT_SLAVE_COUNT);
|
|
|
|
/* Bring all 4 slaves link status to down and test that we have received a
|
|
* lsc interrupts */
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[0], 0);
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[1], 0);
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[2], 0);
|
|
|
|
TEST_ASSERT_EQUAL(test_lsc_interrupt_count, 0,
|
|
"Received a link status change interrupt unexpectedly");
|
|
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[3], 0);
|
|
|
|
TEST_ASSERT(lsc_timeout(TEST_LSC_WAIT_TIMEOUT_MS) == 0,
|
|
"timed out waiting for interrupt");
|
|
|
|
TEST_ASSERT(test_lsc_interrupt_count > 0,
|
|
"Did not receive link status change interrupt");
|
|
|
|
slave_count = rte_eth_bond_active_slaves_get(test_params->bonded_port_id,
|
|
slaves, RTE_MAX_ETHPORTS);
|
|
|
|
TEST_ASSERT_EQUAL(slave_count, 0,
|
|
"Number of active slaves (%d) is not as expected (%d)",
|
|
slave_count, 0);
|
|
|
|
/* bring one slave port up so link status will change */
|
|
test_lsc_interrupt_count = 0;
|
|
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[0], 1);
|
|
|
|
TEST_ASSERT(lsc_timeout(TEST_LSC_WAIT_TIMEOUT_MS) == 0,
|
|
"timed out waiting for interrupt");
|
|
|
|
/* test that we have received another lsc interrupt */
|
|
TEST_ASSERT(test_lsc_interrupt_count > 0,
|
|
"Did not receive link status change interrupt");
|
|
|
|
/* Verify that calling the same slave lsc interrupt doesn't cause another
|
|
* lsc interrupt from bonded device */
|
|
test_lsc_interrupt_count = 0;
|
|
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[0], 1);
|
|
|
|
TEST_ASSERT(lsc_timeout(TEST_LSC_WAIT_TIMEOUT_MS) != 0,
|
|
"received unexpected interrupt");
|
|
|
|
TEST_ASSERT_EQUAL(test_lsc_interrupt_count, 0,
|
|
"Did not receive link status change interrupt");
|
|
|
|
|
|
/* unregister lsc callback before exiting */
|
|
rte_eth_dev_callback_unregister(test_params->bonded_port_id,
|
|
RTE_ETH_EVENT_INTR_LSC, test_bonding_lsc_event_callback,
|
|
&test_params->bonded_port_id);
|
|
|
|
/* Clean up and remove slaves from bonded device */
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
|
|
static int
|
|
generate_test_burst(struct rte_mbuf **pkts_burst, uint16_t burst_size,
|
|
uint8_t vlan, uint8_t ipv4, uint8_t toggle_dst_mac,
|
|
uint8_t toggle_ip_addr, uint8_t toggle_udp_port)
|
|
{
|
|
uint16_t pktlen, generated_burst_size;
|
|
void *ip_hdr;
|
|
|
|
if (toggle_dst_mac)
|
|
initialize_eth_header(test_params->pkt_eth_hdr,
|
|
(struct ether_addr *)src_mac, (struct ether_addr *)dst_mac_1,
|
|
vlan, vlan_id);
|
|
else
|
|
initialize_eth_header(test_params->pkt_eth_hdr,
|
|
(struct ether_addr *)src_mac, (struct ether_addr *)dst_mac_0,
|
|
vlan, vlan_id);
|
|
|
|
|
|
if (toggle_udp_port)
|
|
pktlen = initialize_udp_header(test_params->pkt_udp_hdr, src_port,
|
|
dst_port_1, 64);
|
|
else
|
|
pktlen = initialize_udp_header(test_params->pkt_udp_hdr, src_port,
|
|
dst_port_0, 64);
|
|
|
|
if (ipv4) {
|
|
if (toggle_ip_addr)
|
|
pktlen = initialize_ipv4_header(test_params->pkt_ipv4_hdr, src_addr,
|
|
dst_addr_1, pktlen);
|
|
else
|
|
pktlen = initialize_ipv4_header(test_params->pkt_ipv4_hdr, src_addr,
|
|
dst_addr_0, pktlen);
|
|
|
|
ip_hdr = test_params->pkt_ipv4_hdr;
|
|
} else {
|
|
if (toggle_ip_addr)
|
|
pktlen = initialize_ipv6_header(test_params->pkt_ipv6_hdr,
|
|
(uint8_t *)src_ipv6_addr, (uint8_t *)dst_ipv6_addr_1,
|
|
pktlen);
|
|
else
|
|
pktlen = initialize_ipv6_header(test_params->pkt_ipv6_hdr,
|
|
(uint8_t *)src_ipv6_addr, (uint8_t *)dst_ipv6_addr_0,
|
|
pktlen);
|
|
|
|
ip_hdr = test_params->pkt_ipv6_hdr;
|
|
}
|
|
|
|
/* Generate burst of packets to transmit */
|
|
generated_burst_size = generate_packet_burst(test_params->mbuf_pool,
|
|
pkts_burst, test_params->pkt_eth_hdr, vlan, ip_hdr, ipv4,
|
|
test_params->pkt_udp_hdr, burst_size, PACKET_BURST_GEN_PKT_LEN_128,
|
|
1);
|
|
TEST_ASSERT_EQUAL(generated_burst_size, burst_size,
|
|
"Failed to generate packet burst");
|
|
|
|
return generated_burst_size;
|
|
}
|
|
|
|
/** Round Robin Mode Tests */
|
|
|
|
static int
|
|
test_roundrobin_tx_burst(void)
|
|
{
|
|
int i, burst_size;
|
|
struct rte_mbuf *pkt_burst[MAX_PKT_BURST];
|
|
struct rte_eth_stats port_stats;
|
|
|
|
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
|
|
BONDING_MODE_ROUND_ROBIN, 0, 2, 1),
|
|
"Failed to intialise bonded device");
|
|
|
|
burst_size = 20 * test_params->bonded_slave_count;
|
|
|
|
TEST_ASSERT(burst_size <= MAX_PKT_BURST,
|
|
"Burst size specified is greater than supported.");
|
|
|
|
/* Generate test bursts of packets to transmit */
|
|
TEST_ASSERT_EQUAL(generate_test_burst(pkt_burst, burst_size, 0, 1, 0, 0, 0),
|
|
burst_size, "failed to generate test burst");
|
|
|
|
/* Send burst on bonded port */
|
|
TEST_ASSERT_EQUAL(rte_eth_tx_burst(
|
|
test_params->bonded_port_id, 0, pkt_burst, burst_size), burst_size,
|
|
"tx burst failed");
|
|
|
|
/* Verify bonded port tx stats */
|
|
rte_eth_stats_get(test_params->bonded_port_id, &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, (uint64_t)burst_size,
|
|
"Bonded Port (%d) opackets value (%u) not as expected (%d)\n",
|
|
test_params->bonded_port_id, (unsigned int)port_stats.opackets,
|
|
burst_size);
|
|
|
|
/* Verify slave ports tx stats */
|
|
for (i = 0; i < test_params->bonded_slave_count; i++) {
|
|
rte_eth_stats_get(test_params->slave_port_ids[i], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets,
|
|
(uint64_t)burst_size / test_params->bonded_slave_count,
|
|
"Slave Port (%d) opackets value (%u) not as expected (%d)\n",
|
|
test_params->bonded_port_id, (unsigned int)port_stats.opackets,
|
|
burst_size / test_params->bonded_slave_count);
|
|
}
|
|
|
|
/* Put all slaves down and try and transmit */
|
|
for (i = 0; i < test_params->bonded_slave_count; i++) {
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[i], 0);
|
|
}
|
|
|
|
/* Send burst on bonded port */
|
|
TEST_ASSERT_EQUAL(rte_eth_tx_burst(test_params->bonded_port_id, 0,
|
|
pkt_burst, burst_size), 0,
|
|
"tx burst return unexpected value");
|
|
|
|
/* Clean up and remove slaves from bonded device */
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
|
|
#ifdef RTE_MBUF_REFCNT
|
|
static int
|
|
verify_mbufs_ref_count(struct rte_mbuf **mbufs, int nb_mbufs, int val)
|
|
{
|
|
int i, refcnt;
|
|
|
|
for (i = 0; i < nb_mbufs; i++) {
|
|
refcnt = rte_mbuf_refcnt_read(mbufs[i]);
|
|
TEST_ASSERT_EQUAL(refcnt, val,
|
|
"mbuf ref count (%d)is not the expected value (%d)",
|
|
refcnt, val);
|
|
}
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
|
|
static void
|
|
free_mbufs(struct rte_mbuf **mbufs, int nb_mbufs)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < nb_mbufs; i++)
|
|
rte_pktmbuf_free(mbufs[i]);
|
|
}
|
|
|
|
#define TEST_RR_SLAVE_TX_FAIL_SLAVE_COUNT (2)
|
|
#define TEST_RR_SLAVE_TX_FAIL_BURST_SIZE (64)
|
|
#define TEST_RR_SLAVE_TX_FAIL_PACKETS_COUNT (22)
|
|
#define TEST_RR_SLAVE_TX_FAIL_FAILING_SLAVE_IDX (1)
|
|
|
|
static int
|
|
test_roundrobin_tx_burst_slave_tx_fail(void)
|
|
{
|
|
struct rte_mbuf *pkt_burst[MAX_PKT_BURST];
|
|
struct rte_mbuf *expected_tx_fail_pkts[MAX_PKT_BURST];
|
|
|
|
struct rte_eth_stats port_stats;
|
|
|
|
int i, first_fail_idx, tx_count;
|
|
|
|
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
|
|
BONDING_MODE_ROUND_ROBIN, 0,
|
|
TEST_RR_SLAVE_TX_FAIL_SLAVE_COUNT, 1),
|
|
"Failed to intialise bonded device");
|
|
|
|
/* Generate test bursts of packets to transmit */
|
|
TEST_ASSERT_EQUAL(generate_test_burst(pkt_burst,
|
|
TEST_RR_SLAVE_TX_FAIL_BURST_SIZE, 0, 1, 0, 0, 0),
|
|
TEST_RR_SLAVE_TX_FAIL_BURST_SIZE,
|
|
"Failed to generate test packet burst");
|
|
|
|
/* Copy references to packets which we expect not to be transmitted */
|
|
first_fail_idx = (TEST_RR_SLAVE_TX_FAIL_BURST_SIZE -
|
|
(TEST_RR_SLAVE_TX_FAIL_PACKETS_COUNT *
|
|
TEST_RR_SLAVE_TX_FAIL_SLAVE_COUNT)) +
|
|
TEST_RR_SLAVE_TX_FAIL_FAILING_SLAVE_IDX;
|
|
|
|
for (i = 0; i < TEST_RR_SLAVE_TX_FAIL_PACKETS_COUNT; i++) {
|
|
expected_tx_fail_pkts[i] = pkt_burst[first_fail_idx +
|
|
(i * TEST_RR_SLAVE_TX_FAIL_SLAVE_COUNT)];
|
|
}
|
|
|
|
/* Set virtual slave to only fail transmission of
|
|
* TEST_RR_SLAVE_TX_FAIL_PACKETS_COUNT packets in burst */
|
|
virtual_ethdev_tx_burst_fn_set_success(
|
|
test_params->slave_port_ids[TEST_RR_SLAVE_TX_FAIL_FAILING_SLAVE_IDX],
|
|
0);
|
|
|
|
virtual_ethdev_tx_burst_fn_set_tx_pkt_fail_count(
|
|
test_params->slave_port_ids[TEST_RR_SLAVE_TX_FAIL_FAILING_SLAVE_IDX],
|
|
TEST_RR_SLAVE_TX_FAIL_PACKETS_COUNT);
|
|
|
|
tx_count = rte_eth_tx_burst(test_params->bonded_port_id, 0, pkt_burst,
|
|
TEST_RR_SLAVE_TX_FAIL_BURST_SIZE);
|
|
|
|
TEST_ASSERT_EQUAL(tx_count, TEST_RR_SLAVE_TX_FAIL_BURST_SIZE -
|
|
TEST_RR_SLAVE_TX_FAIL_PACKETS_COUNT,
|
|
"Transmitted (%d) an unexpected (%d) number of packets", tx_count,
|
|
TEST_RR_SLAVE_TX_FAIL_BURST_SIZE -
|
|
TEST_RR_SLAVE_TX_FAIL_PACKETS_COUNT);
|
|
|
|
/* Verify that failed packet are expected failed packets */
|
|
for (i = 0; i < TEST_RR_SLAVE_TX_FAIL_PACKETS_COUNT; i++) {
|
|
TEST_ASSERT_EQUAL(expected_tx_fail_pkts[i], pkt_burst[i + tx_count],
|
|
"expected mbuf (%d) pointer %p not expected pointer %p",
|
|
i, expected_tx_fail_pkts[i], pkt_burst[i + tx_count]);
|
|
}
|
|
|
|
/* Verify bonded port tx stats */
|
|
rte_eth_stats_get(test_params->bonded_port_id, &port_stats);
|
|
|
|
TEST_ASSERT_EQUAL(port_stats.opackets,
|
|
(uint64_t)TEST_RR_SLAVE_TX_FAIL_BURST_SIZE -
|
|
TEST_RR_SLAVE_TX_FAIL_PACKETS_COUNT,
|
|
"Bonded Port (%d) opackets value (%u) not as expected (%d)",
|
|
test_params->bonded_port_id, (unsigned int)port_stats.opackets,
|
|
TEST_RR_SLAVE_TX_FAIL_BURST_SIZE -
|
|
TEST_RR_SLAVE_TX_FAIL_PACKETS_COUNT);
|
|
|
|
/* Verify slave ports tx stats */
|
|
for (i = 0; i < test_params->bonded_slave_count; i++) {
|
|
int slave_expected_tx_count;
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[i], &port_stats);
|
|
|
|
slave_expected_tx_count = TEST_RR_SLAVE_TX_FAIL_BURST_SIZE /
|
|
test_params->bonded_slave_count;
|
|
|
|
if (i == TEST_RR_SLAVE_TX_FAIL_FAILING_SLAVE_IDX)
|
|
slave_expected_tx_count = slave_expected_tx_count -
|
|
TEST_RR_SLAVE_TX_FAIL_PACKETS_COUNT;
|
|
|
|
TEST_ASSERT_EQUAL(port_stats.opackets,
|
|
(uint64_t)slave_expected_tx_count,
|
|
"Slave Port (%d) opackets value (%u) not as expected (%d)",
|
|
test_params->slave_port_ids[i],
|
|
(unsigned int)port_stats.opackets, slave_expected_tx_count);
|
|
}
|
|
|
|
#ifdef RTE_MBUF_REFCNT
|
|
/* Verify that all mbufs have a ref value of zero */
|
|
TEST_ASSERT_SUCCESS(verify_mbufs_ref_count(&pkt_burst[tx_count],
|
|
TEST_RR_SLAVE_TX_FAIL_PACKETS_COUNT, 1),
|
|
"mbufs refcnts not as expected");
|
|
#endif
|
|
free_mbufs(&pkt_burst[tx_count], TEST_RR_SLAVE_TX_FAIL_PACKETS_COUNT);
|
|
|
|
/* Clean up and remove slaves from bonded device */
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
|
|
static int
|
|
test_roundrobin_rx_burst_on_single_slave(void)
|
|
{
|
|
struct rte_mbuf *gen_pkt_burst[MAX_PKT_BURST] = { NULL };
|
|
struct rte_mbuf *rx_pkt_burst[MAX_PKT_BURST] = { NULL };
|
|
|
|
struct rte_eth_stats port_stats;
|
|
|
|
int i, j, burst_size = 25;
|
|
|
|
/* Initialize bonded device with 4 slaves in round robin mode */
|
|
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
|
|
BONDING_MODE_ROUND_ROBIN, 0, 4, 1),
|
|
"Failed to initialize bonded device with slaves");
|
|
|
|
/* Generate test bursts of packets to transmit */
|
|
TEST_ASSERT_EQUAL(generate_test_burst(
|
|
gen_pkt_burst, burst_size, 0, 1, 0, 0, 0), burst_size,
|
|
"burst generation failed");
|
|
|
|
for (i = 0; i < test_params->bonded_slave_count; i++) {
|
|
/* Add rx data to slave */
|
|
virtual_ethdev_add_mbufs_to_rx_queue(test_params->slave_port_ids[i],
|
|
&gen_pkt_burst[0], burst_size);
|
|
|
|
/* Call rx burst on bonded device */
|
|
/* Send burst on bonded port */
|
|
TEST_ASSERT_EQUAL(rte_eth_rx_burst(
|
|
test_params->bonded_port_id, 0, rx_pkt_burst,
|
|
MAX_PKT_BURST), burst_size,
|
|
"round-robin rx burst failed");
|
|
|
|
/* Verify bonded device rx count */
|
|
rte_eth_stats_get(test_params->bonded_port_id, &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.ipackets, (uint64_t)burst_size,
|
|
"Bonded Port (%d) ipackets value (%u) not as expected (%d)",
|
|
test_params->bonded_port_id,
|
|
(unsigned int)port_stats.ipackets, burst_size);
|
|
|
|
|
|
|
|
/* Verify bonded slave devices rx count */
|
|
/* Verify slave ports tx stats */
|
|
for (j = 0; j < test_params->bonded_slave_count; j++) {
|
|
rte_eth_stats_get(test_params->slave_port_ids[j], &port_stats);
|
|
|
|
if (i == j) {
|
|
TEST_ASSERT_EQUAL(port_stats.ipackets, (uint64_t)burst_size,
|
|
"Slave Port (%d) ipackets value (%u) not as expected"
|
|
" (%d)", test_params->slave_port_ids[i],
|
|
(unsigned int)port_stats.ipackets, burst_size);
|
|
} else {
|
|
TEST_ASSERT_EQUAL(port_stats.ipackets, 0,
|
|
"Slave Port (%d) ipackets value (%u) not as expected"
|
|
" (%d)", test_params->slave_port_ids[i],
|
|
(unsigned int)port_stats.ipackets, 0);
|
|
}
|
|
|
|
/* Reset bonded slaves stats */
|
|
rte_eth_stats_reset(test_params->slave_port_ids[j]);
|
|
}
|
|
/* reset bonded device stats */
|
|
rte_eth_stats_reset(test_params->bonded_port_id);
|
|
}
|
|
|
|
/* free mbufs */
|
|
for (i = 0; i < MAX_PKT_BURST; i++) {
|
|
if (gen_pkt_burst[i] != NULL)
|
|
rte_pktmbuf_free(gen_pkt_burst[i]);
|
|
|
|
if (rx_pkt_burst[i] != NULL)
|
|
rte_pktmbuf_free(rx_pkt_burst[i]);
|
|
}
|
|
|
|
|
|
/* Clean up and remove slaves from bonded device */
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
|
|
#define TEST_ROUNDROBIN_TX_BURST_SLAVE_COUNT (3)
|
|
|
|
static int
|
|
test_roundrobin_rx_burst_on_multiple_slaves(void)
|
|
{
|
|
struct rte_mbuf *gen_pkt_burst[TEST_ROUNDROBIN_TX_BURST_SLAVE_COUNT][MAX_PKT_BURST];
|
|
|
|
struct rte_mbuf *rx_pkt_burst[MAX_PKT_BURST] = { NULL };
|
|
struct rte_eth_stats port_stats;
|
|
|
|
int burst_size[TEST_ROUNDROBIN_TX_BURST_SLAVE_COUNT] = { 15, 13, 36 };
|
|
int i, nb_rx;
|
|
|
|
/* Initialize bonded device with 4 slaves in round robin mode */
|
|
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
|
|
BONDING_MODE_ROUND_ROBIN, 0, 4, 1),
|
|
"Failed to initialize bonded device with slaves");
|
|
|
|
/* Generate test bursts of packets to transmit */
|
|
for (i = 0; i < TEST_ROUNDROBIN_TX_BURST_SLAVE_COUNT; i++) {
|
|
TEST_ASSERT_EQUAL(generate_test_burst(
|
|
&gen_pkt_burst[i][0], burst_size[i], 0, 1, 0, 0, 0),
|
|
burst_size[i], "burst generation failed");
|
|
}
|
|
|
|
/* Add rx data to slaves */
|
|
for (i = 0; i < TEST_ROUNDROBIN_TX_BURST_SLAVE_COUNT; i++) {
|
|
virtual_ethdev_add_mbufs_to_rx_queue(test_params->slave_port_ids[i],
|
|
&gen_pkt_burst[i][0], burst_size[i]);
|
|
}
|
|
|
|
/* Call rx burst on bonded device */
|
|
/* Send burst on bonded port */
|
|
nb_rx = rte_eth_rx_burst(test_params->bonded_port_id, 0, rx_pkt_burst,
|
|
MAX_PKT_BURST);
|
|
TEST_ASSERT_EQUAL(nb_rx , burst_size[0] + burst_size[1] + burst_size[2],
|
|
"round-robin rx burst failed (%d != %d)\n", nb_rx,
|
|
burst_size[0] + burst_size[1] + burst_size[2]);
|
|
|
|
/* Verify bonded device rx count */
|
|
rte_eth_stats_get(test_params->bonded_port_id, &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.ipackets,
|
|
(uint64_t)(burst_size[0] + burst_size[1] + burst_size[2]),
|
|
"Bonded Port (%d) ipackets value (%u) not as expected (%d)",
|
|
test_params->bonded_port_id, (unsigned int)port_stats.ipackets,
|
|
burst_size[0] + burst_size[1] + burst_size[2]);
|
|
|
|
/* Verify bonded slave devices rx counts */
|
|
rte_eth_stats_get(test_params->slave_port_ids[0], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.ipackets, (uint64_t)burst_size[0],
|
|
"Slave Port (%d) ipackets value (%u) not as expected (%d)",
|
|
test_params->slave_port_ids[0],
|
|
(unsigned int)port_stats.ipackets, burst_size[0]);
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[1], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.ipackets, (uint64_t)burst_size[1],
|
|
"Slave Port (%d) ipackets value (%u) not as expected (%d)",
|
|
test_params->slave_port_ids[1], (unsigned int)port_stats.ipackets,
|
|
burst_size[1]);
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[2], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.ipackets, (uint64_t)burst_size[2],
|
|
"Slave Port (%d) ipackets value (%u) not as expected (%d)",
|
|
test_params->slave_port_ids[2],
|
|
(unsigned int)port_stats.ipackets, burst_size[2]);
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[3], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.ipackets, 0,
|
|
"Slave Port (%d) ipackets value (%u) not as expected (%d)",
|
|
test_params->slave_port_ids[3],
|
|
(unsigned int)port_stats.ipackets, 0);
|
|
|
|
/* free mbufs */
|
|
for (i = 0; i < MAX_PKT_BURST; i++) {
|
|
if (rx_pkt_burst[i] != NULL)
|
|
rte_pktmbuf_free(rx_pkt_burst[i]);
|
|
}
|
|
|
|
/* Clean up and remove slaves from bonded device */
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
|
|
static int
|
|
test_roundrobin_verify_mac_assignment(void)
|
|
{
|
|
struct ether_addr read_mac_addr, expected_mac_addr_0, expected_mac_addr_2;
|
|
|
|
int i;
|
|
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[0], &expected_mac_addr_0);
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[2], &expected_mac_addr_2);
|
|
|
|
/* Initialize bonded device with 4 slaves in round robin mode */
|
|
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
|
|
BONDING_MODE_ROUND_ROBIN, 0, 4, 1),
|
|
"Failed to initialize bonded device with slaves");
|
|
|
|
/* Verify that all MACs are the same as first slave added to bonded dev */
|
|
for (i = 0; i < test_params->bonded_slave_count; i++) {
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[i], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_0, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port (%d) mac address not set to that of primary port",
|
|
test_params->slave_port_ids[i]);
|
|
}
|
|
|
|
/* change primary and verify that MAC addresses haven't changed */
|
|
TEST_ASSERT_SUCCESS(rte_eth_bond_primary_set(test_params->bonded_port_id,
|
|
test_params->slave_port_ids[2]),
|
|
"Failed to set bonded port (%d) primary port to (%d)",
|
|
test_params->bonded_port_id, test_params->slave_port_ids[i]);
|
|
|
|
for (i = 0; i < test_params->bonded_slave_count; i++) {
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[i], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_0, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port (%d) mac address has changed to that of primary"
|
|
" port without stop/start toggle of bonded device",
|
|
test_params->slave_port_ids[i]);
|
|
}
|
|
|
|
/* stop / start bonded device and verify that primary MAC address is
|
|
* propagate to bonded device and slaves */
|
|
rte_eth_dev_stop(test_params->bonded_port_id);
|
|
|
|
TEST_ASSERT_SUCCESS(rte_eth_dev_start(test_params->bonded_port_id),
|
|
"Failed to start bonded device");
|
|
|
|
rte_eth_macaddr_get(test_params->bonded_port_id, &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(
|
|
memcmp(&expected_mac_addr_2, &read_mac_addr, sizeof(read_mac_addr)),
|
|
"bonded port (%d) mac address not set to that of new primary port",
|
|
test_params->slave_port_ids[i]);
|
|
|
|
for (i = 0; i < test_params->bonded_slave_count; i++) {
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[i], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_2, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port (%d) mac address not set to that of new primary"
|
|
" port", test_params->slave_port_ids[i]);
|
|
}
|
|
|
|
/* Set explicit MAC address */
|
|
TEST_ASSERT_SUCCESS(rte_eth_bond_mac_address_set(
|
|
test_params->bonded_port_id, (struct ether_addr *)bonded_mac),
|
|
"Failed to set MAC");
|
|
|
|
rte_eth_macaddr_get(test_params->bonded_port_id, &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(bonded_mac, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"bonded port (%d) mac address not set to that of new primary port",
|
|
test_params->slave_port_ids[i]);
|
|
|
|
for (i = 0; i < test_params->bonded_slave_count; i++) {
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[i], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(bonded_mac, &read_mac_addr,
|
|
sizeof(read_mac_addr)), "slave port (%d) mac address not set to"
|
|
" that of new primary port\n", test_params->slave_port_ids[i]);
|
|
}
|
|
|
|
/* Clean up and remove slaves from bonded device */
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
|
|
static int
|
|
test_roundrobin_verify_promiscuous_enable_disable(void)
|
|
{
|
|
int i, promiscuous_en;
|
|
|
|
/* Initialize bonded device with 4 slaves in round robin mode */
|
|
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
|
|
BONDING_MODE_ROUND_ROBIN, 0, 4, 1),
|
|
"Failed to initialize bonded device with slaves");
|
|
|
|
rte_eth_promiscuous_enable(test_params->bonded_port_id);
|
|
|
|
promiscuous_en = rte_eth_promiscuous_get(test_params->bonded_port_id);
|
|
TEST_ASSERT_EQUAL(promiscuous_en, 1,
|
|
"Port (%d) promiscuous mode not enabled",
|
|
test_params->bonded_port_id);
|
|
|
|
for (i = 0; i < test_params->bonded_slave_count; i++) {
|
|
promiscuous_en = rte_eth_promiscuous_get(
|
|
test_params->slave_port_ids[i]);
|
|
TEST_ASSERT_EQUAL(promiscuous_en, 1,
|
|
"slave port (%d) promiscuous mode not enabled",
|
|
test_params->slave_port_ids[i]);
|
|
}
|
|
|
|
rte_eth_promiscuous_disable(test_params->bonded_port_id);
|
|
|
|
promiscuous_en = rte_eth_promiscuous_get(test_params->bonded_port_id);
|
|
TEST_ASSERT_EQUAL(promiscuous_en, 0,
|
|
"Port (%d) promiscuous mode not disabled\n",
|
|
test_params->bonded_port_id);
|
|
|
|
for (i = 0; i < test_params->bonded_slave_count; i++) {
|
|
promiscuous_en = rte_eth_promiscuous_get(
|
|
test_params->slave_port_ids[i]);
|
|
TEST_ASSERT_EQUAL(promiscuous_en, 0,
|
|
"Port (%d) promiscuous mode not disabled\n",
|
|
test_params->slave_port_ids[i]);
|
|
}
|
|
|
|
/* Clean up and remove slaves from bonded device */
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
|
|
#define TEST_RR_LINK_STATUS_SLAVE_COUNT (4)
|
|
#define TEST_RR_LINK_STATUS_EXPECTED_ACTIVE_SLAVE_COUNT (2)
|
|
|
|
static int
|
|
test_roundrobin_verify_slave_link_status_change_behaviour(void)
|
|
{
|
|
struct rte_mbuf *tx_pkt_burst[MAX_PKT_BURST] = { NULL };
|
|
struct rte_mbuf *gen_pkt_burst[TEST_RR_LINK_STATUS_SLAVE_COUNT][MAX_PKT_BURST];
|
|
struct rte_mbuf *rx_pkt_burst[MAX_PKT_BURST] = { NULL };
|
|
|
|
struct rte_eth_stats port_stats;
|
|
uint8_t slaves[RTE_MAX_ETHPORTS];
|
|
|
|
int i, burst_size, slave_count;
|
|
|
|
/* NULL all pointers in array to simplify cleanup */
|
|
memset(gen_pkt_burst, 0, sizeof(gen_pkt_burst));
|
|
|
|
/* Initialize bonded device with TEST_RR_LINK_STATUS_SLAVE_COUNT slaves
|
|
* in round robin mode */
|
|
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
|
|
BONDING_MODE_ROUND_ROBIN, 0, TEST_RR_LINK_STATUS_SLAVE_COUNT, 1),
|
|
"Failed to initialize bonded device with slaves");
|
|
|
|
/* Verify Current Slaves Count /Active Slave Count is */
|
|
slave_count = rte_eth_bond_slaves_get(test_params->bonded_port_id, slaves,
|
|
RTE_MAX_ETHPORTS);
|
|
TEST_ASSERT_EQUAL(slave_count, TEST_RR_LINK_STATUS_SLAVE_COUNT,
|
|
"Number of slaves (%d) is not as expected (%d).",
|
|
slave_count, TEST_RR_LINK_STATUS_SLAVE_COUNT);
|
|
|
|
slave_count = rte_eth_bond_active_slaves_get(test_params->bonded_port_id,
|
|
slaves, RTE_MAX_ETHPORTS);
|
|
TEST_ASSERT_EQUAL(slave_count, TEST_RR_LINK_STATUS_SLAVE_COUNT,
|
|
"Number of active slaves (%d) is not as expected (%d).",
|
|
slave_count, TEST_RR_LINK_STATUS_SLAVE_COUNT);
|
|
|
|
/* Set 2 slaves eth_devs link status to down */
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[1], 0);
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[3], 0);
|
|
|
|
slave_count = rte_eth_bond_active_slaves_get(test_params->bonded_port_id,
|
|
slaves, RTE_MAX_ETHPORTS);
|
|
TEST_ASSERT_EQUAL(slave_count,
|
|
TEST_RR_LINK_STATUS_EXPECTED_ACTIVE_SLAVE_COUNT,
|
|
"Number of active slaves (%d) is not as expected (%d).\n",
|
|
slave_count, TEST_RR_LINK_STATUS_EXPECTED_ACTIVE_SLAVE_COUNT);
|
|
|
|
burst_size = 20;
|
|
|
|
/* Verify that pkts are not sent on slaves with link status down:
|
|
*
|
|
* 1. Generate test burst of traffic
|
|
* 2. Transmit burst on bonded eth_dev
|
|
* 3. Verify stats for bonded eth_dev (opackets = burst_size)
|
|
* 4. Verify stats for slave eth_devs (s0 = 10, s1 = 0, s2 = 10, s3 = 0)
|
|
*/
|
|
TEST_ASSERT_EQUAL(
|
|
generate_test_burst(tx_pkt_burst, burst_size, 0, 1, 0, 0, 0),
|
|
burst_size, "generate_test_burst failed");
|
|
|
|
rte_eth_stats_reset(test_params->bonded_port_id);
|
|
|
|
|
|
TEST_ASSERT_EQUAL(
|
|
rte_eth_tx_burst(test_params->bonded_port_id, 0, tx_pkt_burst,
|
|
burst_size), burst_size, "rte_eth_tx_burst failed");
|
|
|
|
rte_eth_stats_get(test_params->bonded_port_id, &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, (uint64_t)burst_size,
|
|
"Port (%d) opackets stats (%d) not expected (%d) value",
|
|
test_params->bonded_port_id, (int)port_stats.opackets,
|
|
burst_size);
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[0], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, (uint64_t)10,
|
|
"Port (%d) opackets stats (%d) not expected (%d) value",
|
|
test_params->slave_port_ids[0], (int)port_stats.opackets, 10);
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[1], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, (uint64_t)0,
|
|
"Port (%d) opackets stats (%d) not expected (%d) value",
|
|
test_params->slave_port_ids[1], (int)port_stats.opackets, 0);
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[2], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, (uint64_t)10,
|
|
"Port (%d) opackets stats (%d) not expected (%d) value",
|
|
test_params->slave_port_ids[2], (int)port_stats.opackets, 10);
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[3], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, (uint64_t)0,
|
|
"Port (%d) opackets stats (%d) not expected (%d) value",
|
|
test_params->slave_port_ids[3], (int)port_stats.opackets, 0);
|
|
|
|
/* Verify that pkts are not sent on slaves with link status down:
|
|
*
|
|
* 1. Generate test bursts of traffic
|
|
* 2. Add bursts on to virtual eth_devs
|
|
* 3. Rx burst on bonded eth_dev, expected (burst_ size *
|
|
* TEST_RR_LINK_STATUS_EXPECTED_ACTIVE_SLAVE_COUNT) received
|
|
* 4. Verify stats for bonded eth_dev
|
|
* 6. Verify stats for slave eth_devs (s0 = 10, s1 = 0, s2 = 10, s3 = 0)
|
|
*/
|
|
for (i = 0; i < TEST_RR_LINK_STATUS_SLAVE_COUNT; i++) {
|
|
TEST_ASSERT_EQUAL(generate_test_burst(
|
|
&gen_pkt_burst[i][0], burst_size, 0, 1, 0, 0, 0),
|
|
burst_size, "failed to generate packet burst");
|
|
|
|
virtual_ethdev_add_mbufs_to_rx_queue(test_params->slave_port_ids[i],
|
|
&gen_pkt_burst[i][0], burst_size);
|
|
}
|
|
|
|
TEST_ASSERT_EQUAL(rte_eth_rx_burst(
|
|
test_params->bonded_port_id, 0, rx_pkt_burst, MAX_PKT_BURST),
|
|
burst_size + burst_size,
|
|
"rte_eth_rx_burst failed");
|
|
|
|
/* Verify bonded device rx count */
|
|
rte_eth_stats_get(test_params->bonded_port_id, &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.ipackets , (uint64_t)(burst_size + burst_size),
|
|
"(%d) port_stats.ipackets not as expected\n",
|
|
test_params->bonded_port_id);
|
|
|
|
/* free mbufs */
|
|
for (i = 0; i < MAX_PKT_BURST; i++) {
|
|
if (rx_pkt_burst[i] != NULL)
|
|
rte_pktmbuf_free(rx_pkt_burst[i]);
|
|
|
|
if (gen_pkt_burst[1][i] != NULL)
|
|
rte_pktmbuf_free(gen_pkt_burst[1][i]);
|
|
|
|
if (gen_pkt_burst[3][i] != NULL)
|
|
rte_pktmbuf_free(gen_pkt_burst[1][i]);
|
|
}
|
|
|
|
/* Clean up and remove slaves from bonded device */
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
|
|
#define TEST_RR_POLLING_LINK_STATUS_SLAVE_COUNT (2)
|
|
|
|
uint8_t polling_slave_mac[] = {0xDE, 0xAD, 0xBE, 0xEF, 0x00, 0x00 };
|
|
|
|
|
|
int polling_test_slaves[TEST_RR_POLLING_LINK_STATUS_SLAVE_COUNT] = { -1, -1 };
|
|
|
|
static int
|
|
test_roundrobin_verfiy_polling_slave_link_status_change(void)
|
|
{
|
|
struct ether_addr *mac_addr = (struct ether_addr *)polling_slave_mac;
|
|
char slave_name[RTE_ETH_NAME_MAX_LEN];
|
|
|
|
int i;
|
|
|
|
for (i = 0; i < TEST_RR_POLLING_LINK_STATUS_SLAVE_COUNT; i++) {
|
|
/* Generate slave name / MAC address */
|
|
snprintf(slave_name, RTE_ETH_NAME_MAX_LEN, "eth_virt_poll_%d", i);
|
|
mac_addr->addr_bytes[ETHER_ADDR_LEN-1] = i;
|
|
|
|
/* Create slave devices with no ISR Support */
|
|
if (polling_test_slaves[i] == -1) {
|
|
polling_test_slaves[i] = virtual_ethdev_create(slave_name, mac_addr,
|
|
rte_socket_id(), 0);
|
|
TEST_ASSERT(polling_test_slaves[i] >= 0,
|
|
"Failed to create virtual virtual ethdev %s\n", slave_name);
|
|
|
|
/* Configure slave */
|
|
TEST_ASSERT_SUCCESS(configure_ethdev(polling_test_slaves[i], 0, 0),
|
|
"Failed to configure virtual ethdev %s(%d)", slave_name,
|
|
polling_test_slaves[i]);
|
|
}
|
|
|
|
/* Add slave to bonded device */
|
|
TEST_ASSERT_SUCCESS(rte_eth_bond_slave_add(test_params->bonded_port_id,
|
|
polling_test_slaves[i]),
|
|
"Failed to add slave %s(%d) to bonded device %d",
|
|
slave_name, polling_test_slaves[i],
|
|
test_params->bonded_port_id);
|
|
}
|
|
|
|
/* Initialize bonded device */
|
|
TEST_ASSERT_SUCCESS(configure_ethdev(test_params->bonded_port_id, 1, 1),
|
|
"Failed to configure bonded device %d",
|
|
test_params->bonded_port_id);
|
|
|
|
|
|
/* Register link status change interrupt callback */
|
|
rte_eth_dev_callback_register(test_params->bonded_port_id,
|
|
RTE_ETH_EVENT_INTR_LSC, test_bonding_lsc_event_callback,
|
|
&test_params->bonded_port_id);
|
|
|
|
/* link status change callback for first slave link up */
|
|
test_lsc_interrupt_count = 0;
|
|
|
|
virtual_ethdev_set_link_status(polling_test_slaves[0], 1);
|
|
|
|
TEST_ASSERT_SUCCESS(lsc_timeout(15000), "timed out waiting for interrupt");
|
|
|
|
|
|
/* no link status change callback for second slave link up */
|
|
test_lsc_interrupt_count = 0;
|
|
|
|
virtual_ethdev_set_link_status(polling_test_slaves[1], 1);
|
|
|
|
TEST_ASSERT_FAIL(lsc_timeout(15000), "unexpectedly succeeded");
|
|
|
|
/* link status change callback for both slave links down */
|
|
test_lsc_interrupt_count = 0;
|
|
|
|
virtual_ethdev_set_link_status(polling_test_slaves[0], 0);
|
|
virtual_ethdev_set_link_status(polling_test_slaves[1], 0);
|
|
|
|
TEST_ASSERT_SUCCESS(lsc_timeout(20000), "timed out waiting for interrupt");
|
|
|
|
/* Un-Register link status change interrupt callback */
|
|
rte_eth_dev_callback_unregister(test_params->bonded_port_id,
|
|
RTE_ETH_EVENT_INTR_LSC, test_bonding_lsc_event_callback,
|
|
&test_params->bonded_port_id);
|
|
|
|
|
|
/* Clean up and remove slaves from bonded device */
|
|
for (i = 0; i < TEST_RR_POLLING_LINK_STATUS_SLAVE_COUNT; i++) {
|
|
|
|
TEST_ASSERT_SUCCESS(
|
|
rte_eth_bond_slave_remove(test_params->bonded_port_id,
|
|
polling_test_slaves[i]),
|
|
"Failed to remove slave %d from bonded port (%d)",
|
|
polling_test_slaves[i], test_params->bonded_port_id);
|
|
}
|
|
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
|
|
|
|
/** Active Backup Mode Tests */
|
|
|
|
static int
|
|
test_activebackup_tx_burst(void)
|
|
{
|
|
int i, pktlen, primary_port, burst_size;
|
|
struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
|
|
struct rte_eth_stats port_stats;
|
|
|
|
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
|
|
BONDING_MODE_ACTIVE_BACKUP, 0, 1, 1),
|
|
"Failed to initialize bonded device with slaves");
|
|
|
|
initialize_eth_header(test_params->pkt_eth_hdr,
|
|
(struct ether_addr *)src_mac, (struct ether_addr *)dst_mac_0, 0, 0);
|
|
pktlen = initialize_udp_header(test_params->pkt_udp_hdr, src_port,
|
|
dst_port_0, 16);
|
|
pktlen = initialize_ipv4_header(test_params->pkt_ipv4_hdr, src_addr,
|
|
dst_addr_0, pktlen);
|
|
|
|
burst_size = 20 * test_params->bonded_slave_count;
|
|
|
|
TEST_ASSERT(burst_size < MAX_PKT_BURST,
|
|
"Burst size specified is greater than supported.");
|
|
|
|
/* Generate a burst of packets to transmit */
|
|
TEST_ASSERT_EQUAL(generate_packet_burst(test_params->mbuf_pool, pkts_burst,
|
|
test_params->pkt_eth_hdr, 0, test_params->pkt_ipv4_hdr, 1,
|
|
test_params->pkt_udp_hdr, burst_size, PACKET_BURST_GEN_PKT_LEN, 1),
|
|
burst_size, "failed to generate burst correctly");
|
|
|
|
/* Send burst on bonded port */
|
|
TEST_ASSERT_EQUAL(rte_eth_tx_burst(test_params->bonded_port_id, 0, pkts_burst,
|
|
burst_size), burst_size, "tx burst failed");
|
|
|
|
/* Verify bonded port tx stats */
|
|
rte_eth_stats_get(test_params->bonded_port_id, &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, (uint64_t)burst_size,
|
|
"Bonded Port (%d) opackets value (%u) not as expected (%d)",
|
|
test_params->bonded_port_id, (unsigned int)port_stats.opackets,
|
|
burst_size);
|
|
|
|
primary_port = rte_eth_bond_primary_get(test_params->bonded_port_id);
|
|
|
|
/* Verify slave ports tx stats */
|
|
for (i = 0; i < test_params->bonded_slave_count; i++) {
|
|
rte_eth_stats_get(test_params->slave_port_ids[i], &port_stats);
|
|
if (test_params->slave_port_ids[i] == primary_port) {
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, (uint64_t)burst_size,
|
|
"Slave Port (%d) opackets value (%u) not as expected (%d)",
|
|
test_params->bonded_port_id,
|
|
(unsigned int)port_stats.opackets,
|
|
burst_size / test_params->bonded_slave_count);
|
|
} else {
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, 0,
|
|
"Slave Port (%d) opackets value (%u) not as expected (%d)",
|
|
test_params->bonded_port_id,
|
|
(unsigned int)port_stats.opackets, 0);
|
|
}
|
|
}
|
|
|
|
/* Put all slaves down and try and transmit */
|
|
for (i = 0; i < test_params->bonded_slave_count; i++) {
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[i], 0);
|
|
}
|
|
|
|
/* Send burst on bonded port */
|
|
TEST_ASSERT_EQUAL(rte_eth_tx_burst(test_params->bonded_port_id, 0,
|
|
pkts_burst, burst_size), 0, "Sending empty burst failed");
|
|
|
|
/* Clean up and remove slaves from bonded device */
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
|
|
#define TEST_ACTIVE_BACKUP_RX_BURST_SLAVE_COUNT (4)
|
|
|
|
static int
|
|
test_activebackup_rx_burst(void)
|
|
{
|
|
struct rte_mbuf *gen_pkt_burst[MAX_PKT_BURST] = { NULL };
|
|
struct rte_mbuf *rx_pkt_burst[MAX_PKT_BURST] = { NULL };
|
|
|
|
struct rte_eth_stats port_stats;
|
|
|
|
int primary_port;
|
|
|
|
int i, j, burst_size = 17;
|
|
|
|
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
|
|
BONDING_MODE_ACTIVE_BACKUP, 0,
|
|
TEST_ACTIVE_BACKUP_RX_BURST_SLAVE_COUNT, 1),
|
|
"Failed to initialize bonded device with slaves");
|
|
|
|
primary_port = rte_eth_bond_primary_get(test_params->bonded_port_id);
|
|
TEST_ASSERT(primary_port >= 0,
|
|
"failed to get primary slave for bonded port (%d)",
|
|
test_params->bonded_port_id);
|
|
|
|
for (i = 0; i < test_params->bonded_slave_count; i++) {
|
|
/* Generate test bursts of packets to transmit */
|
|
TEST_ASSERT_EQUAL(generate_test_burst(
|
|
&gen_pkt_burst[0], burst_size, 0, 1, 0, 0, 0),
|
|
burst_size, "burst generation failed");
|
|
|
|
/* Add rx data to slave */
|
|
virtual_ethdev_add_mbufs_to_rx_queue(test_params->slave_port_ids[i],
|
|
&gen_pkt_burst[0], burst_size);
|
|
|
|
/* Call rx burst on bonded device */
|
|
TEST_ASSERT_EQUAL(rte_eth_rx_burst(test_params->bonded_port_id, 0,
|
|
&rx_pkt_burst[0], MAX_PKT_BURST), burst_size,
|
|
"rte_eth_rx_burst failed");
|
|
|
|
if (test_params->slave_port_ids[i] == primary_port) {
|
|
/* Verify bonded device rx count */
|
|
rte_eth_stats_get(test_params->bonded_port_id, &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.ipackets, (uint64_t)burst_size,
|
|
"Bonded Port (%d) ipackets value (%u) not as expected (%d)",
|
|
test_params->bonded_port_id,
|
|
(unsigned int)port_stats.ipackets, burst_size);
|
|
|
|
/* Verify bonded slave devices rx count */
|
|
for (j = 0; j < test_params->bonded_slave_count; j++) {
|
|
rte_eth_stats_get(test_params->slave_port_ids[j], &port_stats);
|
|
if (i == j) {
|
|
TEST_ASSERT_EQUAL(port_stats.ipackets, (uint64_t)burst_size,
|
|
"Slave Port (%d) ipackets value (%u) not as "
|
|
"expected (%d)", test_params->slave_port_ids[i],
|
|
(unsigned int)port_stats.ipackets, burst_size);
|
|
} else {
|
|
TEST_ASSERT_EQUAL(port_stats.ipackets, 0,
|
|
"Slave Port (%d) ipackets value (%u) not as "
|
|
"expected (%d)\n", test_params->slave_port_ids[i],
|
|
(unsigned int)port_stats.ipackets, 0);
|
|
}
|
|
}
|
|
} else {
|
|
for (j = 0; j < test_params->bonded_slave_count; j++) {
|
|
rte_eth_stats_get(test_params->slave_port_ids[j], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.ipackets, 0,
|
|
"Slave Port (%d) ipackets value (%u) not as expected "
|
|
"(%d)", test_params->slave_port_ids[i],
|
|
(unsigned int)port_stats.ipackets, 0);
|
|
}
|
|
}
|
|
|
|
/* free mbufs */
|
|
for (i = 0; i < MAX_PKT_BURST; i++) {
|
|
if (rx_pkt_burst[i] != NULL) {
|
|
rte_pktmbuf_free(rx_pkt_burst[i]);
|
|
rx_pkt_burst[i] = NULL;
|
|
}
|
|
}
|
|
|
|
/* reset bonded device stats */
|
|
rte_eth_stats_reset(test_params->bonded_port_id);
|
|
}
|
|
|
|
/* Clean up and remove slaves from bonded device */
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
|
|
static int
|
|
test_activebackup_verify_promiscuous_enable_disable(void)
|
|
{
|
|
int i, primary_port, promiscuous_en;
|
|
|
|
/* Initialize bonded device with 4 slaves in round robin mode */
|
|
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
|
|
BONDING_MODE_ACTIVE_BACKUP, 0, 4, 1),
|
|
"Failed to initialize bonded device with slaves");
|
|
|
|
primary_port = rte_eth_bond_primary_get(test_params->bonded_port_id);
|
|
TEST_ASSERT(primary_port >= 0,
|
|
"failed to get primary slave for bonded port (%d)",
|
|
test_params->bonded_port_id);
|
|
|
|
rte_eth_promiscuous_enable(test_params->bonded_port_id);
|
|
|
|
TEST_ASSERT_EQUAL(rte_eth_promiscuous_get(test_params->bonded_port_id), 1,
|
|
"Port (%d) promiscuous mode not enabled",
|
|
test_params->bonded_port_id);
|
|
|
|
for (i = 0; i < test_params->bonded_slave_count; i++) {
|
|
promiscuous_en = rte_eth_promiscuous_get(
|
|
test_params->slave_port_ids[i]);
|
|
if (primary_port == test_params->slave_port_ids[i]) {
|
|
TEST_ASSERT_EQUAL(promiscuous_en, 1,
|
|
"slave port (%d) promiscuous mode not enabled",
|
|
test_params->slave_port_ids[i]);
|
|
} else {
|
|
TEST_ASSERT_EQUAL(promiscuous_en, 0,
|
|
"slave port (%d) promiscuous mode enabled",
|
|
test_params->slave_port_ids[i]);
|
|
}
|
|
|
|
}
|
|
|
|
rte_eth_promiscuous_disable(test_params->bonded_port_id);
|
|
|
|
TEST_ASSERT_EQUAL(rte_eth_promiscuous_get(test_params->bonded_port_id), 0,
|
|
"Port (%d) promiscuous mode not disabled\n",
|
|
test_params->bonded_port_id);
|
|
|
|
for (i = 0; i < test_params->bonded_slave_count; i++) {
|
|
promiscuous_en = rte_eth_promiscuous_get(
|
|
test_params->slave_port_ids[i]);
|
|
TEST_ASSERT_EQUAL(promiscuous_en, 0,
|
|
"slave port (%d) promiscuous mode not disabled\n",
|
|
test_params->slave_port_ids[i]);
|
|
}
|
|
|
|
/* Clean up and remove slaves from bonded device */
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
|
|
static int
|
|
test_activebackup_verify_mac_assignment(void)
|
|
{
|
|
struct ether_addr read_mac_addr, expected_mac_addr_0, expected_mac_addr_1;
|
|
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[0], &expected_mac_addr_0);
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[1], &expected_mac_addr_1);
|
|
|
|
/* Initialize bonded device with 2 slaves in active backup mode */
|
|
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
|
|
BONDING_MODE_ACTIVE_BACKUP, 0, 2, 1),
|
|
"Failed to initialize bonded device with slaves");
|
|
|
|
/* Verify that bonded MACs is that of first slave and that the other slave
|
|
* MAC hasn't been changed */
|
|
rte_eth_macaddr_get(test_params->bonded_port_id, &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_0, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"bonded port (%d) mac address not set to that of primary port",
|
|
test_params->bonded_port_id);
|
|
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[0], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_0, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port (%d) mac address not set to that of primary port",
|
|
test_params->slave_port_ids[0]);
|
|
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[1], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_1, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port (%d) mac address not as expected",
|
|
test_params->slave_port_ids[1]);
|
|
|
|
/* change primary and verify that MAC addresses haven't changed */
|
|
TEST_ASSERT_EQUAL(rte_eth_bond_primary_set(test_params->bonded_port_id,
|
|
test_params->slave_port_ids[1]), 0,
|
|
"Failed to set bonded port (%d) primary port to (%d)",
|
|
test_params->bonded_port_id, test_params->slave_port_ids[1]);
|
|
|
|
rte_eth_macaddr_get(test_params->bonded_port_id, &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_0, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"bonded port (%d) mac address not set to that of primary port",
|
|
test_params->bonded_port_id);
|
|
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[0], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_0, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port (%d) mac address not set to that of primary port",
|
|
test_params->slave_port_ids[0]);
|
|
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[1], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_1, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port (%d) mac address not as expected",
|
|
test_params->slave_port_ids[1]);
|
|
|
|
/* stop / start bonded device and verify that primary MAC address is
|
|
* propagated to bonded device and slaves */
|
|
|
|
rte_eth_dev_stop(test_params->bonded_port_id);
|
|
|
|
TEST_ASSERT_SUCCESS(rte_eth_dev_start(test_params->bonded_port_id),
|
|
"Failed to start device");
|
|
|
|
rte_eth_macaddr_get(test_params->bonded_port_id, &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_1, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"bonded port (%d) mac address not set to that of primary port",
|
|
test_params->bonded_port_id);
|
|
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[0], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_0, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port (%d) mac address not as expected",
|
|
test_params->slave_port_ids[0]);
|
|
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[1], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_1, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port (%d) mac address not set to that of primary port",
|
|
test_params->slave_port_ids[1]);
|
|
|
|
/* Set explicit MAC address */
|
|
TEST_ASSERT_SUCCESS(rte_eth_bond_mac_address_set(
|
|
test_params->bonded_port_id, (struct ether_addr *)bonded_mac),
|
|
"failed to set MAC address");
|
|
|
|
rte_eth_macaddr_get(test_params->bonded_port_id, &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&bonded_mac, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"bonded port (%d) mac address not set to that of bonded port",
|
|
test_params->bonded_port_id);
|
|
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[0], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_0, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port (%d) mac address not as expected",
|
|
test_params->slave_port_ids[0]);
|
|
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[1], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&bonded_mac, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port (%d) mac address not set to that of bonded port",
|
|
test_params->slave_port_ids[1]);
|
|
|
|
/* Clean up and remove slaves from bonded device */
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
|
|
static int
|
|
test_activebackup_verify_slave_link_status_change_failover(void)
|
|
{
|
|
struct rte_mbuf *pkt_burst[TEST_ACTIVE_BACKUP_RX_BURST_SLAVE_COUNT][MAX_PKT_BURST];
|
|
struct rte_mbuf *rx_pkt_burst[MAX_PKT_BURST] = { NULL };
|
|
struct rte_eth_stats port_stats;
|
|
|
|
uint8_t slaves[RTE_MAX_ETHPORTS];
|
|
|
|
int i, j, burst_size, slave_count, primary_port;
|
|
|
|
burst_size = 21;
|
|
|
|
memset(pkt_burst, 0, sizeof(pkt_burst));
|
|
|
|
/* Generate packet burst for testing */
|
|
TEST_ASSERT_EQUAL(generate_test_burst(
|
|
&pkt_burst[0][0], burst_size, 0, 1, 0, 0, 0), burst_size,
|
|
"generate_test_burst failed");
|
|
|
|
/* Initialize bonded device with 4 slaves in round robin mode */
|
|
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
|
|
BONDING_MODE_ACTIVE_BACKUP, 0,
|
|
TEST_ACTIVE_BACKUP_RX_BURST_SLAVE_COUNT, 1),
|
|
"Failed to initialize bonded device with slaves");
|
|
|
|
/* Verify Current Slaves Count /Active Slave Count is */
|
|
slave_count = rte_eth_bond_slaves_get(test_params->bonded_port_id, slaves,
|
|
RTE_MAX_ETHPORTS);
|
|
TEST_ASSERT_EQUAL(slave_count, 4,
|
|
"Number of slaves (%d) is not as expected (%d).",
|
|
slave_count, 4);
|
|
|
|
slave_count = rte_eth_bond_active_slaves_get(test_params->bonded_port_id,
|
|
slaves, RTE_MAX_ETHPORTS);
|
|
TEST_ASSERT_EQUAL(slave_count, 4,
|
|
"Number of active slaves (%d) is not as expected (%d).",
|
|
slave_count, 4);
|
|
|
|
primary_port = rte_eth_bond_primary_get(test_params->bonded_port_id);
|
|
TEST_ASSERT_EQUAL(primary_port, test_params->slave_port_ids[0],
|
|
"Primary port not as expected");
|
|
|
|
/* Bring 2 slaves down and verify active slave count */
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[1], 0);
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[3], 0);
|
|
|
|
TEST_ASSERT_EQUAL(rte_eth_bond_active_slaves_get(
|
|
test_params->bonded_port_id, slaves, RTE_MAX_ETHPORTS), 2,
|
|
"Number of active slaves (%d) is not as expected (%d).",
|
|
slave_count, 2);
|
|
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[1], 1);
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[3], 1);
|
|
|
|
|
|
/* Bring primary port down, verify that active slave count is 3 and primary
|
|
* has changed */
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[0], 0);
|
|
|
|
TEST_ASSERT_EQUAL(rte_eth_bond_active_slaves_get(
|
|
test_params->bonded_port_id, slaves, RTE_MAX_ETHPORTS),
|
|
3,
|
|
"Number of active slaves (%d) is not as expected (%d).",
|
|
slave_count, 3);
|
|
|
|
primary_port = rte_eth_bond_primary_get(test_params->bonded_port_id);
|
|
TEST_ASSERT_EQUAL(primary_port, test_params->slave_port_ids[2],
|
|
"Primary port not as expected");
|
|
|
|
/* Verify that pkts are sent on new primary slave */
|
|
|
|
TEST_ASSERT_EQUAL(rte_eth_tx_burst(
|
|
test_params->bonded_port_id, 0, &pkt_burst[0][0],
|
|
burst_size), burst_size, "rte_eth_tx_burst failed");
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[2], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, (uint64_t)burst_size,
|
|
"(%d) port_stats.opackets not as expected",
|
|
test_params->slave_port_ids[2]);
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[0], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, 0,
|
|
"(%d) port_stats.opackets not as expected\n",
|
|
test_params->slave_port_ids[0]);
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[1], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, 0,
|
|
"(%d) port_stats.opackets not as expected\n",
|
|
test_params->slave_port_ids[1]);
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[3], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, 0,
|
|
"(%d) port_stats.opackets not as expected\n",
|
|
test_params->slave_port_ids[3]);
|
|
|
|
/* Generate packet burst for testing */
|
|
|
|
for (i = 0; i < TEST_ACTIVE_BACKUP_RX_BURST_SLAVE_COUNT; i++) {
|
|
TEST_ASSERT_EQUAL(generate_test_burst(
|
|
&pkt_burst[i][0], burst_size, 0, 1, 0, 0, 0), burst_size,
|
|
"generate_test_burst failed");
|
|
|
|
virtual_ethdev_add_mbufs_to_rx_queue(
|
|
test_params->slave_port_ids[i], &pkt_burst[i][0], burst_size);
|
|
}
|
|
|
|
TEST_ASSERT_EQUAL(rte_eth_rx_burst(
|
|
test_params->bonded_port_id, 0, rx_pkt_burst, MAX_PKT_BURST),
|
|
burst_size, "rte_eth_rx_burst\n");
|
|
|
|
/* Verify bonded device rx count */
|
|
rte_eth_stats_get(test_params->bonded_port_id, &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.ipackets, (uint64_t)burst_size,
|
|
"(%d) port_stats.ipackets not as expected",
|
|
test_params->bonded_port_id);
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[2], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, (uint64_t)burst_size,
|
|
"(%d) port_stats.opackets not as expected",
|
|
test_params->slave_port_ids[2]);
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[0], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, 0,
|
|
"(%d) port_stats.opackets not as expected",
|
|
test_params->slave_port_ids[0]);
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[1], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, 0,
|
|
"(%d) port_stats.opackets not as expected",
|
|
test_params->slave_port_ids[1]);
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[3], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, 0,
|
|
"(%d) port_stats.opackets not as expected",
|
|
test_params->slave_port_ids[3]);
|
|
|
|
/* free mbufs */
|
|
for (i = 0; i < TEST_ACTIVE_BACKUP_RX_BURST_SLAVE_COUNT; i++) {
|
|
for (j = 0; j < MAX_PKT_BURST; j++) {
|
|
if (pkt_burst[i][j] != NULL) {
|
|
rte_pktmbuf_free(pkt_burst[i][j]);
|
|
pkt_burst[i][j] = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Clean up and remove slaves from bonded device */
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
|
|
/** Balance Mode Tests */
|
|
|
|
static int
|
|
test_balance_xmit_policy_configuration(void)
|
|
{
|
|
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
|
|
BONDING_MODE_ACTIVE_BACKUP, 0, 2, 1),
|
|
"Failed to initialize_bonded_device_with_slaves.");
|
|
|
|
/* Invalid port id */
|
|
TEST_ASSERT_FAIL(rte_eth_bond_xmit_policy_set(
|
|
INVALID_PORT_ID, BALANCE_XMIT_POLICY_LAYER2),
|
|
"Expected call to failed as invalid port specified.");
|
|
|
|
/* Set xmit policy on non bonded device */
|
|
TEST_ASSERT_FAIL(rte_eth_bond_xmit_policy_set(
|
|
test_params->slave_port_ids[0], BALANCE_XMIT_POLICY_LAYER2),
|
|
"Expected call to failed as invalid port specified.");
|
|
|
|
|
|
TEST_ASSERT_SUCCESS(rte_eth_bond_xmit_policy_set(
|
|
test_params->bonded_port_id, BALANCE_XMIT_POLICY_LAYER2),
|
|
"Failed to set balance xmit policy.");
|
|
|
|
TEST_ASSERT_EQUAL(rte_eth_bond_xmit_policy_get(test_params->bonded_port_id),
|
|
BALANCE_XMIT_POLICY_LAYER2, "balance xmit policy not as expected.");
|
|
|
|
|
|
TEST_ASSERT_SUCCESS(rte_eth_bond_xmit_policy_set(
|
|
test_params->bonded_port_id, BALANCE_XMIT_POLICY_LAYER23),
|
|
"Failed to set balance xmit policy.");
|
|
|
|
TEST_ASSERT_EQUAL(rte_eth_bond_xmit_policy_get(test_params->bonded_port_id),
|
|
BALANCE_XMIT_POLICY_LAYER23,
|
|
"balance xmit policy not as expected.");
|
|
|
|
|
|
TEST_ASSERT_SUCCESS(rte_eth_bond_xmit_policy_set(
|
|
test_params->bonded_port_id, BALANCE_XMIT_POLICY_LAYER34),
|
|
"Failed to set balance xmit policy.");
|
|
|
|
TEST_ASSERT_EQUAL(rte_eth_bond_xmit_policy_get(test_params->bonded_port_id),
|
|
BALANCE_XMIT_POLICY_LAYER34,
|
|
"balance xmit policy not as expected.");
|
|
|
|
/* Invalid port id */
|
|
TEST_ASSERT_FAIL(rte_eth_bond_xmit_policy_get(INVALID_PORT_ID),
|
|
"Expected call to failed as invalid port specified.");
|
|
|
|
/* Clean up and remove slaves from bonded device */
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
|
|
#define TEST_BALANCE_L2_TX_BURST_SLAVE_COUNT (2)
|
|
|
|
static int
|
|
test_balance_l2_tx_burst(void)
|
|
{
|
|
struct rte_mbuf *pkts_burst[TEST_BALANCE_L2_TX_BURST_SLAVE_COUNT][MAX_PKT_BURST];
|
|
int burst_size[TEST_BALANCE_L2_TX_BURST_SLAVE_COUNT] = { 10, 15 };
|
|
|
|
uint16_t pktlen;
|
|
int i;
|
|
struct rte_eth_stats port_stats;
|
|
|
|
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
|
|
BONDING_MODE_BALANCE, 0, TEST_BALANCE_L2_TX_BURST_SLAVE_COUNT, 1),
|
|
"Failed to initialize_bonded_device_with_slaves.");
|
|
|
|
TEST_ASSERT_SUCCESS(rte_eth_bond_xmit_policy_set(
|
|
test_params->bonded_port_id, BALANCE_XMIT_POLICY_LAYER2),
|
|
"Failed to set balance xmit policy.");
|
|
|
|
initialize_eth_header(test_params->pkt_eth_hdr,
|
|
(struct ether_addr *)src_mac, (struct ether_addr *)dst_mac_0, 0, 0);
|
|
pktlen = initialize_udp_header(test_params->pkt_udp_hdr, src_port,
|
|
dst_port_0, 16);
|
|
pktlen = initialize_ipv4_header(test_params->pkt_ipv4_hdr, src_addr,
|
|
dst_addr_0, pktlen);
|
|
|
|
/* Generate a burst 1 of packets to transmit */
|
|
TEST_ASSERT_EQUAL(generate_packet_burst(test_params->mbuf_pool, &pkts_burst[0][0],
|
|
test_params->pkt_eth_hdr, 0, test_params->pkt_ipv4_hdr, 1,
|
|
test_params->pkt_udp_hdr, burst_size[0],
|
|
PACKET_BURST_GEN_PKT_LEN, 1), burst_size[0],
|
|
"failed to generate packet burst");
|
|
|
|
initialize_eth_header(test_params->pkt_eth_hdr,
|
|
(struct ether_addr *)src_mac, (struct ether_addr *)dst_mac_1, 0, 0);
|
|
|
|
/* Generate a burst 2 of packets to transmit */
|
|
TEST_ASSERT_EQUAL(generate_packet_burst(test_params->mbuf_pool, &pkts_burst[1][0],
|
|
test_params->pkt_eth_hdr, 0, test_params->pkt_ipv4_hdr, 1,
|
|
test_params->pkt_udp_hdr, burst_size[1],
|
|
PACKET_BURST_GEN_PKT_LEN, 1), burst_size[1],
|
|
"failed to generate packet burst");
|
|
|
|
/* Send burst 1 on bonded port */
|
|
for (i = 0; i < TEST_BALANCE_L2_TX_BURST_SLAVE_COUNT; i++) {
|
|
TEST_ASSERT_EQUAL(rte_eth_tx_burst(test_params->bonded_port_id, 0,
|
|
&pkts_burst[i][0], burst_size[i]),
|
|
burst_size[i], "Failed to transmit packet burst");
|
|
}
|
|
|
|
/* Verify bonded port tx stats */
|
|
rte_eth_stats_get(test_params->bonded_port_id, &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets,
|
|
(uint64_t)(burst_size[0] + burst_size[1]),
|
|
"Bonded Port (%d) opackets value (%u) not as expected (%d)",
|
|
test_params->bonded_port_id, (unsigned int)port_stats.opackets,
|
|
burst_size[0] + burst_size[1]);
|
|
|
|
|
|
/* Verify slave ports tx stats */
|
|
rte_eth_stats_get(test_params->slave_port_ids[0], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, (uint64_t)burst_size[0],
|
|
"Slave Port (%d) opackets value (%u) not as expected (%d)",
|
|
test_params->slave_port_ids[0], (unsigned int)port_stats.opackets,
|
|
burst_size[0]);
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[1], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, (uint64_t)burst_size[1],
|
|
"Slave Port (%d) opackets value (%u) not as expected (%d)\n",
|
|
test_params->slave_port_ids[1], (unsigned int)port_stats.opackets,
|
|
burst_size[1]);
|
|
|
|
/* Put all slaves down and try and transmit */
|
|
for (i = 0; i < test_params->bonded_slave_count; i++) {
|
|
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[i], 0);
|
|
}
|
|
|
|
/* Send burst on bonded port */
|
|
TEST_ASSERT_EQUAL(rte_eth_tx_burst(
|
|
test_params->bonded_port_id, 0, &pkts_burst[0][0], burst_size[0]),
|
|
0, "Expected zero packet");
|
|
|
|
/* Clean up and remove slaves from bonded device */
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
|
|
static int
|
|
balance_l23_tx_burst(uint8_t vlan_enabled, uint8_t ipv4,
|
|
uint8_t toggle_mac_addr, uint8_t toggle_ip_addr)
|
|
{
|
|
int i, burst_size_1, burst_size_2, nb_tx_1, nb_tx_2;
|
|
|
|
struct rte_mbuf *pkts_burst_1[MAX_PKT_BURST];
|
|
struct rte_mbuf *pkts_burst_2[MAX_PKT_BURST];
|
|
|
|
struct rte_eth_stats port_stats;
|
|
|
|
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
|
|
BONDING_MODE_BALANCE, 0, 2, 1),
|
|
"Failed to initialize_bonded_device_with_slaves.");
|
|
|
|
TEST_ASSERT_SUCCESS(rte_eth_bond_xmit_policy_set(
|
|
test_params->bonded_port_id, BALANCE_XMIT_POLICY_LAYER23),
|
|
"Failed to set balance xmit policy.");
|
|
|
|
burst_size_1 = 20;
|
|
burst_size_2 = 10;
|
|
|
|
TEST_ASSERT(burst_size_1 < MAX_PKT_BURST || burst_size_2 < MAX_PKT_BURST,
|
|
"Burst size specified is greater than supported.");
|
|
|
|
/* Generate test bursts of packets to transmit */
|
|
TEST_ASSERT_EQUAL(generate_test_burst(
|
|
pkts_burst_1, burst_size_1, vlan_enabled, ipv4, 0, 0, 0),
|
|
burst_size_1, "failed to generate packet burst");
|
|
|
|
TEST_ASSERT_EQUAL(generate_test_burst(pkts_burst_2, burst_size_2, vlan_enabled, ipv4,
|
|
toggle_mac_addr, toggle_ip_addr, 0), burst_size_2,
|
|
"failed to generate packet burst");
|
|
|
|
/* Send burst 1 on bonded port */
|
|
nb_tx_1 = rte_eth_tx_burst(test_params->bonded_port_id, 0, pkts_burst_1,
|
|
burst_size_1);
|
|
TEST_ASSERT_EQUAL(nb_tx_1, burst_size_1, "tx burst failed");
|
|
|
|
/* Send burst 2 on bonded port */
|
|
nb_tx_2 = rte_eth_tx_burst(test_params->bonded_port_id, 0, pkts_burst_2,
|
|
burst_size_2);
|
|
TEST_ASSERT_EQUAL(nb_tx_2, burst_size_2, "tx burst failed");
|
|
|
|
/* Verify bonded port tx stats */
|
|
rte_eth_stats_get(test_params->bonded_port_id, &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, (uint64_t)(nb_tx_1 + nb_tx_2),
|
|
"Bonded Port (%d) opackets value (%u) not as expected (%d)",
|
|
test_params->bonded_port_id, (unsigned int)port_stats.opackets,
|
|
nb_tx_1 + nb_tx_2);
|
|
|
|
/* Verify slave ports tx stats */
|
|
rte_eth_stats_get(test_params->slave_port_ids[0], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, (uint64_t)nb_tx_1,
|
|
"Slave Port (%d) opackets value (%u) not as expected (%d)",
|
|
test_params->slave_port_ids[0], (unsigned int)port_stats.opackets,
|
|
nb_tx_1);
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[1], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, (uint64_t)nb_tx_2,
|
|
"Slave Port (%d) opackets value (%u) not as expected (%d)",
|
|
test_params->slave_port_ids[1], (unsigned int)port_stats.opackets,
|
|
nb_tx_2);
|
|
|
|
/* Put all slaves down and try and transmit */
|
|
for (i = 0; i < test_params->bonded_slave_count; i++) {
|
|
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[i], 0);
|
|
}
|
|
|
|
/* Send burst on bonded port */
|
|
TEST_ASSERT_EQUAL(rte_eth_tx_burst(
|
|
test_params->bonded_port_id, 0, pkts_burst_1,
|
|
burst_size_1), 0, "Expected zero packet");
|
|
|
|
|
|
/* Clean up and remove slaves from bonded device */
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
|
|
static int
|
|
test_balance_l23_tx_burst_ipv4_toggle_ip_addr(void)
|
|
{
|
|
return balance_l23_tx_burst(0, 1, 1, 0);
|
|
}
|
|
|
|
static int
|
|
test_balance_l23_tx_burst_vlan_ipv4_toggle_ip_addr(void)
|
|
{
|
|
return balance_l23_tx_burst(1, 1, 0, 1);
|
|
}
|
|
|
|
static int
|
|
test_balance_l23_tx_burst_ipv6_toggle_ip_addr(void)
|
|
{
|
|
return balance_l23_tx_burst(0, 0, 0, 1);
|
|
}
|
|
|
|
static int
|
|
test_balance_l23_tx_burst_vlan_ipv6_toggle_ip_addr(void)
|
|
{
|
|
return balance_l23_tx_burst(1, 0, 0, 1);
|
|
}
|
|
|
|
static int
|
|
test_balance_l23_tx_burst_toggle_mac_addr(void)
|
|
{
|
|
return balance_l23_tx_burst(0, 0, 1, 0);
|
|
}
|
|
|
|
static int
|
|
balance_l34_tx_burst(uint8_t vlan_enabled, uint8_t ipv4,
|
|
uint8_t toggle_mac_addr, uint8_t toggle_ip_addr,
|
|
uint8_t toggle_udp_port)
|
|
{
|
|
int i, burst_size_1, burst_size_2, nb_tx_1, nb_tx_2;
|
|
|
|
struct rte_mbuf *pkts_burst_1[MAX_PKT_BURST];
|
|
struct rte_mbuf *pkts_burst_2[MAX_PKT_BURST];
|
|
|
|
struct rte_eth_stats port_stats;
|
|
|
|
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
|
|
BONDING_MODE_BALANCE, 0, 2, 1),
|
|
"Failed to initialize_bonded_device_with_slaves.");
|
|
|
|
TEST_ASSERT_SUCCESS(rte_eth_bond_xmit_policy_set(
|
|
test_params->bonded_port_id, BALANCE_XMIT_POLICY_LAYER34),
|
|
"Failed to set balance xmit policy.");
|
|
|
|
burst_size_1 = 20;
|
|
burst_size_2 = 10;
|
|
|
|
TEST_ASSERT(burst_size_1 < MAX_PKT_BURST || burst_size_2 < MAX_PKT_BURST,
|
|
"Burst size specified is greater than supported.");
|
|
|
|
/* Generate test bursts of packets to transmit */
|
|
TEST_ASSERT_EQUAL(generate_test_burst(
|
|
pkts_burst_1, burst_size_1, vlan_enabled, ipv4, 0, 0, 0),
|
|
burst_size_1, "failed to generate burst");
|
|
|
|
TEST_ASSERT_EQUAL(generate_test_burst(pkts_burst_2, burst_size_2,
|
|
vlan_enabled, ipv4, toggle_mac_addr, toggle_ip_addr,
|
|
toggle_udp_port), burst_size_2, "failed to generate burst");
|
|
|
|
/* Send burst 1 on bonded port */
|
|
nb_tx_1 = rte_eth_tx_burst(test_params->bonded_port_id, 0, pkts_burst_1,
|
|
burst_size_1);
|
|
TEST_ASSERT_EQUAL(nb_tx_1, burst_size_1, "tx burst failed");
|
|
|
|
/* Send burst 2 on bonded port */
|
|
nb_tx_2 = rte_eth_tx_burst(test_params->bonded_port_id, 0, pkts_burst_2,
|
|
burst_size_2);
|
|
TEST_ASSERT_EQUAL(nb_tx_2, burst_size_2, "tx burst failed");
|
|
|
|
|
|
/* Verify bonded port tx stats */
|
|
rte_eth_stats_get(test_params->bonded_port_id, &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, (uint64_t)(nb_tx_1 + nb_tx_2),
|
|
"Bonded Port (%d) opackets value (%u) not as expected (%d)",
|
|
test_params->bonded_port_id, (unsigned int)port_stats.opackets,
|
|
nb_tx_1 + nb_tx_2);
|
|
|
|
/* Verify slave ports tx stats */
|
|
rte_eth_stats_get(test_params->slave_port_ids[0], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, (uint64_t)nb_tx_1,
|
|
"Slave Port (%d) opackets value (%u) not as expected (%d)",
|
|
test_params->slave_port_ids[0], (unsigned int)port_stats.opackets,
|
|
nb_tx_1);
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[1], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, (uint64_t)nb_tx_2,
|
|
"Slave Port (%d) opackets value (%u) not as expected (%d)",
|
|
test_params->slave_port_ids[1], (unsigned int)port_stats.opackets,
|
|
nb_tx_2);
|
|
|
|
/* Put all slaves down and try and transmit */
|
|
for (i = 0; i < test_params->bonded_slave_count; i++) {
|
|
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[i], 0);
|
|
}
|
|
|
|
/* Send burst on bonded port */
|
|
TEST_ASSERT_EQUAL(rte_eth_tx_burst(
|
|
test_params->bonded_port_id, 0, pkts_burst_1,
|
|
burst_size_1), 0, "Expected zero packet");
|
|
|
|
/* Clean up and remove slaves from bonded device */
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
|
|
static int
|
|
test_balance_l34_tx_burst_ipv4_toggle_ip_addr(void)
|
|
{
|
|
return balance_l34_tx_burst(0, 1, 0, 1, 0);
|
|
}
|
|
|
|
static int
|
|
test_balance_l34_tx_burst_ipv4_toggle_udp_port(void)
|
|
{
|
|
return balance_l34_tx_burst(0, 1, 0, 0, 1);
|
|
}
|
|
|
|
static int
|
|
test_balance_l34_tx_burst_vlan_ipv4_toggle_ip_addr(void)
|
|
{
|
|
return balance_l34_tx_burst(1, 1, 0, 1, 0);
|
|
}
|
|
|
|
static int
|
|
test_balance_l34_tx_burst_ipv6_toggle_ip_addr(void)
|
|
{
|
|
return balance_l34_tx_burst(0, 0, 0, 1, 0);
|
|
}
|
|
|
|
static int
|
|
test_balance_l34_tx_burst_vlan_ipv6_toggle_ip_addr(void)
|
|
{
|
|
return balance_l34_tx_burst(1, 0, 0, 1, 0);
|
|
}
|
|
|
|
static int
|
|
test_balance_l34_tx_burst_ipv6_toggle_udp_port(void)
|
|
{
|
|
return balance_l34_tx_burst(0, 0, 0, 0, 1);
|
|
}
|
|
|
|
#define TEST_BAL_SLAVE_TX_FAIL_SLAVE_COUNT (2)
|
|
#define TEST_BAL_SLAVE_TX_FAIL_BURST_SIZE_1 (40)
|
|
#define TEST_BAL_SLAVE_TX_FAIL_BURST_SIZE_2 (20)
|
|
#define TEST_BAL_SLAVE_TX_FAIL_PACKETS_COUNT (25)
|
|
#define TEST_BAL_SLAVE_TX_FAIL_FAILING_SLAVE_IDX (0)
|
|
|
|
static int
|
|
test_balance_tx_burst_slave_tx_fail(void)
|
|
{
|
|
struct rte_mbuf *pkts_burst_1[TEST_BAL_SLAVE_TX_FAIL_BURST_SIZE_1];
|
|
struct rte_mbuf *pkts_burst_2[TEST_BAL_SLAVE_TX_FAIL_BURST_SIZE_2];
|
|
|
|
struct rte_mbuf *expected_fail_pkts[TEST_BAL_SLAVE_TX_FAIL_PACKETS_COUNT];
|
|
|
|
struct rte_eth_stats port_stats;
|
|
|
|
int i, first_tx_fail_idx, tx_count_1, tx_count_2;
|
|
|
|
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
|
|
BONDING_MODE_BALANCE, 0,
|
|
TEST_BAL_SLAVE_TX_FAIL_SLAVE_COUNT, 1),
|
|
"Failed to intialise bonded device");
|
|
|
|
TEST_ASSERT_SUCCESS(rte_eth_bond_xmit_policy_set(
|
|
test_params->bonded_port_id, BALANCE_XMIT_POLICY_LAYER2),
|
|
"Failed to set balance xmit policy.");
|
|
|
|
|
|
/* Generate test bursts for transmission */
|
|
TEST_ASSERT_EQUAL(generate_test_burst(pkts_burst_1,
|
|
TEST_BAL_SLAVE_TX_FAIL_BURST_SIZE_1, 0, 0, 0, 0, 0),
|
|
TEST_BAL_SLAVE_TX_FAIL_BURST_SIZE_1,
|
|
"Failed to generate test packet burst 1");
|
|
|
|
first_tx_fail_idx = TEST_BAL_SLAVE_TX_FAIL_BURST_SIZE_1 -
|
|
TEST_BAL_SLAVE_TX_FAIL_PACKETS_COUNT;
|
|
|
|
/* copy mbuf referneces for expected transmission failures */
|
|
for (i = 0; i < TEST_BAL_SLAVE_TX_FAIL_PACKETS_COUNT; i++)
|
|
expected_fail_pkts[i] = pkts_burst_1[i + first_tx_fail_idx];
|
|
|
|
TEST_ASSERT_EQUAL(generate_test_burst(pkts_burst_2,
|
|
TEST_BAL_SLAVE_TX_FAIL_BURST_SIZE_2, 0, 0, 1, 0, 0),
|
|
TEST_BAL_SLAVE_TX_FAIL_BURST_SIZE_2,
|
|
"Failed to generate test packet burst 2");
|
|
|
|
|
|
/* Set virtual slave TEST_BAL_SLAVE_TX_FAIL_FAILING_SLAVE_IDX to only fail
|
|
* transmission of TEST_BAL_SLAVE_TX_FAIL_PACKETS_COUNT packets of burst */
|
|
virtual_ethdev_tx_burst_fn_set_success(
|
|
test_params->slave_port_ids[TEST_BAL_SLAVE_TX_FAIL_FAILING_SLAVE_IDX],
|
|
0);
|
|
|
|
virtual_ethdev_tx_burst_fn_set_tx_pkt_fail_count(
|
|
test_params->slave_port_ids[TEST_BAL_SLAVE_TX_FAIL_FAILING_SLAVE_IDX],
|
|
TEST_BAL_SLAVE_TX_FAIL_PACKETS_COUNT);
|
|
|
|
|
|
/* Transmit burst 1 */
|
|
tx_count_1 = rte_eth_tx_burst(test_params->bonded_port_id, 0, pkts_burst_1,
|
|
TEST_BAL_SLAVE_TX_FAIL_BURST_SIZE_1);
|
|
|
|
TEST_ASSERT_EQUAL(tx_count_1, TEST_BAL_SLAVE_TX_FAIL_BURST_SIZE_1 -
|
|
TEST_BAL_SLAVE_TX_FAIL_PACKETS_COUNT,
|
|
"Transmitted (%d) packets, expected to transmit (%d) packets",
|
|
tx_count_1, TEST_BAL_SLAVE_TX_FAIL_BURST_SIZE_1 -
|
|
TEST_BAL_SLAVE_TX_FAIL_PACKETS_COUNT);
|
|
|
|
/* Verify that failed packet are expected failed packets */
|
|
for (i = 0; i < TEST_RR_SLAVE_TX_FAIL_PACKETS_COUNT; i++) {
|
|
TEST_ASSERT_EQUAL(expected_fail_pkts[i], pkts_burst_1[i + tx_count_1],
|
|
"expected mbuf (%d) pointer %p not expected pointer %p",
|
|
i, expected_fail_pkts[i], pkts_burst_1[i + tx_count_1]);
|
|
}
|
|
|
|
/* Transmit burst 2 */
|
|
tx_count_2 = rte_eth_tx_burst(test_params->bonded_port_id, 0, pkts_burst_2,
|
|
TEST_BAL_SLAVE_TX_FAIL_BURST_SIZE_2);
|
|
|
|
TEST_ASSERT_EQUAL(tx_count_2, TEST_BAL_SLAVE_TX_FAIL_BURST_SIZE_2,
|
|
"Transmitted (%d) packets, expected to transmit (%d) packets",
|
|
tx_count_2, TEST_BAL_SLAVE_TX_FAIL_BURST_SIZE_2);
|
|
|
|
|
|
/* Verify bonded port tx stats */
|
|
rte_eth_stats_get(test_params->bonded_port_id, &port_stats);
|
|
|
|
TEST_ASSERT_EQUAL(port_stats.opackets,
|
|
(uint64_t)((TEST_BAL_SLAVE_TX_FAIL_BURST_SIZE_1 -
|
|
TEST_BAL_SLAVE_TX_FAIL_PACKETS_COUNT) +
|
|
TEST_BAL_SLAVE_TX_FAIL_BURST_SIZE_2),
|
|
"Bonded Port (%d) opackets value (%u) not as expected (%d)",
|
|
test_params->bonded_port_id, (unsigned int)port_stats.opackets,
|
|
(TEST_BAL_SLAVE_TX_FAIL_BURST_SIZE_1 -
|
|
TEST_BAL_SLAVE_TX_FAIL_PACKETS_COUNT) +
|
|
TEST_BAL_SLAVE_TX_FAIL_BURST_SIZE_2);
|
|
|
|
/* Verify slave ports tx stats */
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[0], &port_stats);
|
|
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, (uint64_t)
|
|
TEST_BAL_SLAVE_TX_FAIL_BURST_SIZE_1 -
|
|
TEST_BAL_SLAVE_TX_FAIL_PACKETS_COUNT,
|
|
"Slave Port (%d) opackets value (%u) not as expected (%d)",
|
|
test_params->slave_port_ids[0],
|
|
(unsigned int)port_stats.opackets,
|
|
TEST_BAL_SLAVE_TX_FAIL_BURST_SIZE_1 -
|
|
TEST_BAL_SLAVE_TX_FAIL_PACKETS_COUNT);
|
|
|
|
|
|
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[1], &port_stats);
|
|
|
|
TEST_ASSERT_EQUAL(port_stats.opackets,
|
|
(uint64_t)TEST_BAL_SLAVE_TX_FAIL_BURST_SIZE_2,
|
|
"Slave Port (%d) opackets value (%u) not as expected (%d)",
|
|
test_params->slave_port_ids[1],
|
|
(unsigned int)port_stats.opackets,
|
|
TEST_BAL_SLAVE_TX_FAIL_BURST_SIZE_2);
|
|
|
|
#ifdef RTE_MBUF_REFCNT
|
|
/* Verify that all mbufs have a ref value of zero */
|
|
TEST_ASSERT_SUCCESS(verify_mbufs_ref_count(&pkts_burst_1[tx_count_1],
|
|
TEST_BAL_SLAVE_TX_FAIL_PACKETS_COUNT, 1),
|
|
"mbufs refcnts not as expected");
|
|
#endif
|
|
|
|
free_mbufs(&pkts_burst_1[tx_count_1],
|
|
TEST_BAL_SLAVE_TX_FAIL_PACKETS_COUNT);
|
|
|
|
/* Clean up and remove slaves from bonded device */
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
|
|
#define TEST_BALANCE_RX_BURST_SLAVE_COUNT (3)
|
|
|
|
static int
|
|
test_balance_rx_burst(void)
|
|
{
|
|
struct rte_mbuf *gen_pkt_burst[TEST_BALANCE_RX_BURST_SLAVE_COUNT][MAX_PKT_BURST];
|
|
|
|
struct rte_mbuf *rx_pkt_burst[MAX_PKT_BURST] = { NULL };
|
|
struct rte_eth_stats port_stats;
|
|
|
|
int burst_size[TEST_BALANCE_RX_BURST_SLAVE_COUNT] = { 10, 5, 30 };
|
|
int i, j;
|
|
|
|
memset(gen_pkt_burst, 0, sizeof(gen_pkt_burst));
|
|
|
|
/* Initialize bonded device with 4 slaves in round robin mode */
|
|
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
|
|
BONDING_MODE_BALANCE, 0, 3, 1),
|
|
"Failed to intialise bonded device");
|
|
|
|
/* Generate test bursts of packets to transmit */
|
|
for (i = 0; i < TEST_BALANCE_RX_BURST_SLAVE_COUNT; i++) {
|
|
TEST_ASSERT_EQUAL(generate_test_burst(
|
|
&gen_pkt_burst[i][0], burst_size[i], 0, 0, 1,
|
|
0, 0), burst_size[i],
|
|
"failed to generate packet burst");
|
|
}
|
|
|
|
/* Add rx data to slaves */
|
|
for (i = 0; i < TEST_BALANCE_RX_BURST_SLAVE_COUNT; i++) {
|
|
virtual_ethdev_add_mbufs_to_rx_queue(test_params->slave_port_ids[i],
|
|
&gen_pkt_burst[i][0], burst_size[i]);
|
|
}
|
|
|
|
/* Call rx burst on bonded device */
|
|
/* Send burst on bonded port */
|
|
TEST_ASSERT_EQUAL(rte_eth_rx_burst(test_params->bonded_port_id, 0,
|
|
rx_pkt_burst, MAX_PKT_BURST),
|
|
burst_size[0] + burst_size[1] + burst_size[2],
|
|
"balance rx burst failed\n");
|
|
|
|
/* Verify bonded device rx count */
|
|
rte_eth_stats_get(test_params->bonded_port_id, &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.ipackets,
|
|
(uint64_t)(burst_size[0] + burst_size[1] + burst_size[2]),
|
|
"Bonded Port (%d) ipackets value (%u) not as expected (%d)",
|
|
test_params->bonded_port_id, (unsigned int)port_stats.ipackets,
|
|
burst_size[0] + burst_size[1] + burst_size[2]);
|
|
|
|
|
|
/* Verify bonded slave devices rx counts */
|
|
rte_eth_stats_get(test_params->slave_port_ids[0], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.ipackets, (uint64_t)burst_size[0],
|
|
"Slave Port (%d) ipackets value (%u) not as expected (%d)",
|
|
test_params->slave_port_ids[0],
|
|
(unsigned int)port_stats.ipackets, burst_size[0]);
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[1], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.ipackets, (uint64_t)burst_size[1],
|
|
"Slave Port (%d) ipackets value (%u) not as expected (%d)",
|
|
test_params->slave_port_ids[1], (unsigned int)port_stats.ipackets,
|
|
burst_size[1]);
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[2], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.ipackets, (uint64_t)burst_size[2],
|
|
"Slave Port (%d) ipackets value (%u) not as expected (%d)",
|
|
test_params->slave_port_ids[2], (unsigned int)port_stats.ipackets,
|
|
burst_size[2]);
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[3], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.ipackets, 0,
|
|
"Slave Port (%d) ipackets value (%u) not as expected (%d)",
|
|
test_params->slave_port_ids[3], (unsigned int)port_stats.ipackets,
|
|
0);
|
|
|
|
/* free mbufs */
|
|
for (i = 0; i < TEST_BALANCE_RX_BURST_SLAVE_COUNT; i++) {
|
|
for (j = 0; j < MAX_PKT_BURST; j++) {
|
|
if (gen_pkt_burst[i][j] != NULL) {
|
|
rte_pktmbuf_free(gen_pkt_burst[i][j]);
|
|
gen_pkt_burst[i][j] = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Clean up and remove slaves from bonded device */
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
|
|
static int
|
|
test_balance_verify_promiscuous_enable_disable(void)
|
|
{
|
|
int i;
|
|
|
|
/* Initialize bonded device with 4 slaves in round robin mode */
|
|
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
|
|
BONDING_MODE_BALANCE, 0, 4, 1),
|
|
"Failed to intialise bonded device");
|
|
|
|
rte_eth_promiscuous_enable(test_params->bonded_port_id);
|
|
|
|
TEST_ASSERT_EQUAL(rte_eth_promiscuous_get(test_params->bonded_port_id), 1,
|
|
"Port (%d) promiscuous mode not enabled",
|
|
test_params->bonded_port_id);
|
|
|
|
for (i = 0; i < test_params->bonded_slave_count; i++) {
|
|
TEST_ASSERT_EQUAL(rte_eth_promiscuous_get(
|
|
test_params->slave_port_ids[i]), 1,
|
|
"Port (%d) promiscuous mode not enabled",
|
|
test_params->slave_port_ids[i]);
|
|
}
|
|
|
|
rte_eth_promiscuous_disable(test_params->bonded_port_id);
|
|
|
|
TEST_ASSERT_EQUAL(rte_eth_promiscuous_get(test_params->bonded_port_id), 0,
|
|
"Port (%d) promiscuous mode not disabled",
|
|
test_params->bonded_port_id);
|
|
|
|
for (i = 0; i < test_params->bonded_slave_count; i++) {
|
|
TEST_ASSERT_EQUAL(rte_eth_promiscuous_get(
|
|
test_params->slave_port_ids[i]), 0,
|
|
"Port (%d) promiscuous mode not disabled",
|
|
test_params->slave_port_ids[i]);
|
|
}
|
|
|
|
/* Clean up and remove slaves from bonded device */
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
|
|
static int
|
|
test_balance_verify_mac_assignment(void)
|
|
{
|
|
struct ether_addr read_mac_addr, expected_mac_addr_0, expected_mac_addr_1;
|
|
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[0], &expected_mac_addr_0);
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[1], &expected_mac_addr_1);
|
|
|
|
/* Initialize bonded device with 2 slaves in active backup mode */
|
|
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
|
|
BONDING_MODE_BALANCE, 0, 2, 1),
|
|
"Failed to intialise bonded device");
|
|
|
|
/* Verify that bonded MACs is that of first slave and that the other slave
|
|
* MAC hasn't been changed */
|
|
rte_eth_macaddr_get(test_params->bonded_port_id, &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_0, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"bonded port (%d) mac address not set to that of primary port",
|
|
test_params->bonded_port_id);
|
|
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[0], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_0, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port (%d) mac address not set to that of primary port",
|
|
test_params->slave_port_ids[0]);
|
|
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[1], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_0, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port (%d) mac address not set to that of primary port",
|
|
test_params->slave_port_ids[1]);
|
|
|
|
/* change primary and verify that MAC addresses haven't changed */
|
|
TEST_ASSERT_SUCCESS(rte_eth_bond_primary_set(test_params->bonded_port_id,
|
|
test_params->slave_port_ids[1]),
|
|
"Failed to set bonded port (%d) primary port to (%d)\n",
|
|
test_params->bonded_port_id, test_params->slave_port_ids[1]);
|
|
|
|
rte_eth_macaddr_get(test_params->bonded_port_id, &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_0, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"bonded port (%d) mac address not set to that of primary port",
|
|
test_params->bonded_port_id);
|
|
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[0], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_0, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port (%d) mac address not set to that of primary port",
|
|
test_params->slave_port_ids[0]);
|
|
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[1], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_0, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port (%d) mac address not set to that of primary port",
|
|
test_params->slave_port_ids[1]);
|
|
|
|
/* stop / start bonded device and verify that primary MAC address is
|
|
* propagated to bonded device and slaves */
|
|
|
|
rte_eth_dev_stop(test_params->bonded_port_id);
|
|
|
|
TEST_ASSERT_SUCCESS(rte_eth_dev_start(test_params->bonded_port_id),
|
|
"Failed to start bonded device");
|
|
|
|
rte_eth_macaddr_get(test_params->bonded_port_id, &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_1, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"bonded port (%d) mac address not set to that of primary port",
|
|
test_params->bonded_port_id);
|
|
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[0], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_1, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port (%d) mac address not set to that of primary port",
|
|
test_params->slave_port_ids[0]);
|
|
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[1], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_1, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port (%d) mac address not set to that of primary port",
|
|
test_params->slave_port_ids[1]);
|
|
|
|
/* Set explicit MAC address */
|
|
TEST_ASSERT_SUCCESS(rte_eth_bond_mac_address_set(
|
|
test_params->bonded_port_id, (struct ether_addr *)bonded_mac),
|
|
"failed to set MAC");
|
|
|
|
rte_eth_macaddr_get(test_params->bonded_port_id, &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&bonded_mac, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"bonded port (%d) mac address not set to that of bonded port",
|
|
test_params->bonded_port_id);
|
|
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[0], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&bonded_mac, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port (%d) mac address not as expected\n",
|
|
test_params->slave_port_ids[0]);
|
|
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[1], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&bonded_mac, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port (%d) mac address not set to that of bonded port",
|
|
test_params->slave_port_ids[1]);
|
|
|
|
/* Clean up and remove slaves from bonded device */
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
|
|
#define TEST_BALANCE_LINK_STATUS_SLAVE_COUNT (4)
|
|
|
|
static int
|
|
test_balance_verify_slave_link_status_change_behaviour(void)
|
|
{
|
|
struct rte_mbuf *pkt_burst[TEST_BALANCE_LINK_STATUS_SLAVE_COUNT][MAX_PKT_BURST];
|
|
struct rte_mbuf *rx_pkt_burst[MAX_PKT_BURST] = { NULL };
|
|
struct rte_eth_stats port_stats;
|
|
|
|
uint8_t slaves[RTE_MAX_ETHPORTS];
|
|
|
|
int i, j, burst_size, slave_count;
|
|
|
|
memset(pkt_burst, 0, sizeof(pkt_burst));
|
|
|
|
/* Initialize bonded device with 4 slaves in round robin mode */
|
|
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
|
|
BONDING_MODE_BALANCE, 0, TEST_BALANCE_LINK_STATUS_SLAVE_COUNT, 1),
|
|
"Failed to intialise bonded device");
|
|
|
|
TEST_ASSERT_SUCCESS(rte_eth_bond_xmit_policy_set(
|
|
test_params->bonded_port_id, BALANCE_XMIT_POLICY_LAYER2),
|
|
"Failed to set balance xmit policy.");
|
|
|
|
|
|
/* Verify Current Slaves Count /Active Slave Count is */
|
|
slave_count = rte_eth_bond_slaves_get(test_params->bonded_port_id, slaves,
|
|
RTE_MAX_ETHPORTS);
|
|
TEST_ASSERT_EQUAL(slave_count, TEST_BALANCE_LINK_STATUS_SLAVE_COUNT,
|
|
"Number of slaves (%d) is not as expected (%d).",
|
|
slave_count, TEST_BALANCE_LINK_STATUS_SLAVE_COUNT);
|
|
|
|
slave_count = rte_eth_bond_active_slaves_get(test_params->bonded_port_id,
|
|
slaves, RTE_MAX_ETHPORTS);
|
|
TEST_ASSERT_EQUAL(slave_count, TEST_BALANCE_LINK_STATUS_SLAVE_COUNT,
|
|
"Number of active slaves (%d) is not as expected (%d).",
|
|
slave_count, TEST_BALANCE_LINK_STATUS_SLAVE_COUNT);
|
|
|
|
/* Set 2 slaves link status to down */
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[1], 0);
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[3], 0);
|
|
|
|
TEST_ASSERT_EQUAL(rte_eth_bond_active_slaves_get(
|
|
test_params->bonded_port_id, slaves, RTE_MAX_ETHPORTS), 2,
|
|
"Number of active slaves (%d) is not as expected (%d).",
|
|
slave_count, 2);
|
|
|
|
/* Send to sets of packet burst and verify that they are balanced across
|
|
* slaves */
|
|
burst_size = 21;
|
|
|
|
TEST_ASSERT_EQUAL(generate_test_burst(
|
|
&pkt_burst[0][0], burst_size, 0, 1, 0, 0, 0), burst_size,
|
|
"generate_test_burst failed");
|
|
|
|
TEST_ASSERT_EQUAL(generate_test_burst(
|
|
&pkt_burst[1][0], burst_size, 0, 1, 1, 0, 0), burst_size,
|
|
"generate_test_burst failed");
|
|
|
|
TEST_ASSERT_EQUAL(rte_eth_tx_burst(
|
|
test_params->bonded_port_id, 0, &pkt_burst[0][0], burst_size),
|
|
burst_size, "rte_eth_tx_burst failed");
|
|
|
|
TEST_ASSERT_EQUAL(rte_eth_tx_burst(
|
|
test_params->bonded_port_id, 0, &pkt_burst[1][0], burst_size),
|
|
burst_size, "rte_eth_tx_burst failed");
|
|
|
|
|
|
rte_eth_stats_get(test_params->bonded_port_id, &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, (uint64_t)(burst_size + burst_size),
|
|
"(%d) port_stats.opackets (%d) not as expected (%d).",
|
|
test_params->bonded_port_id, (int)port_stats.opackets,
|
|
burst_size + burst_size);
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[0], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, (uint64_t)burst_size,
|
|
"(%d) port_stats.opackets (%d) not as expected (%d).",
|
|
test_params->slave_port_ids[0], (int)port_stats.opackets,
|
|
burst_size);
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[2], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, (uint64_t)burst_size,
|
|
"(%d) port_stats.opackets (%d) not as expected (%d).",
|
|
test_params->slave_port_ids[2], (int)port_stats.opackets,
|
|
burst_size);
|
|
|
|
/* verify that all packets get send on primary slave when no other slaves
|
|
* are available */
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[2], 0);
|
|
|
|
TEST_ASSERT_EQUAL(rte_eth_bond_active_slaves_get(
|
|
test_params->bonded_port_id, slaves, RTE_MAX_ETHPORTS), 1,
|
|
"Number of active slaves (%d) is not as expected (%d).",
|
|
slave_count, 1);
|
|
|
|
TEST_ASSERT_EQUAL(generate_test_burst(
|
|
&pkt_burst[1][0], burst_size, 0, 1, 1, 0, 0), burst_size,
|
|
"generate_test_burst failed");
|
|
|
|
TEST_ASSERT_EQUAL(rte_eth_tx_burst(
|
|
test_params->bonded_port_id, 0, &pkt_burst[1][0], burst_size),
|
|
burst_size, "rte_eth_tx_burst failed");
|
|
|
|
rte_eth_stats_get(test_params->bonded_port_id, &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets,
|
|
(uint64_t)(burst_size + burst_size + burst_size),
|
|
"(%d) port_stats.opackets (%d) not as expected (%d).\n",
|
|
test_params->bonded_port_id, (int)port_stats.opackets,
|
|
burst_size + burst_size + burst_size);
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[0], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, (uint64_t)(burst_size + burst_size),
|
|
"(%d) port_stats.opackets (%d) not as expected (%d).",
|
|
test_params->slave_port_ids[0], (int)port_stats.opackets,
|
|
burst_size + burst_size);
|
|
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[0], 0);
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[1], 1);
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[2], 1);
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[3], 1);
|
|
|
|
for (i = 0; i < TEST_BALANCE_LINK_STATUS_SLAVE_COUNT; i++) {
|
|
TEST_ASSERT_EQUAL(generate_test_burst(
|
|
&pkt_burst[i][0], burst_size, 0, 1, 0, 0, 0), burst_size,
|
|
"Failed to generate packet burst");
|
|
|
|
virtual_ethdev_add_mbufs_to_rx_queue(test_params->slave_port_ids[i],
|
|
&pkt_burst[i][0], burst_size);
|
|
}
|
|
|
|
/* Verify that pkts are not received on slaves with link status down */
|
|
|
|
rte_eth_rx_burst(test_params->bonded_port_id, 0, rx_pkt_burst,
|
|
MAX_PKT_BURST);
|
|
|
|
/* Verify bonded device rx count */
|
|
rte_eth_stats_get(test_params->bonded_port_id, &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.ipackets, (uint64_t)(burst_size * 3),
|
|
"(%d) port_stats.ipackets (%d) not as expected (%d)\n",
|
|
test_params->bonded_port_id, (int)port_stats.ipackets,
|
|
burst_size * 3);
|
|
|
|
/* free mbufs allocate for rx testing */
|
|
for (i = 0; i < TEST_BALANCE_RX_BURST_SLAVE_COUNT; i++) {
|
|
for (j = 0; j < MAX_PKT_BURST; j++) {
|
|
if (pkt_burst[i][j] != NULL) {
|
|
rte_pktmbuf_free(pkt_burst[i][j]);
|
|
pkt_burst[i][j] = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Clean up and remove slaves from bonded device */
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
|
|
#ifdef RTE_MBUF_REFCNT
|
|
/** Broadcast Mode Tests */
|
|
|
|
static int
|
|
test_broadcast_tx_burst(void)
|
|
{
|
|
int i, pktlen, burst_size;
|
|
struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
|
|
|
|
struct rte_eth_stats port_stats;
|
|
|
|
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
|
|
BONDING_MODE_BROADCAST, 0, 2, 1),
|
|
"Failed to intialise bonded device");
|
|
|
|
initialize_eth_header(test_params->pkt_eth_hdr,
|
|
(struct ether_addr *)src_mac, (struct ether_addr *)dst_mac_0, 0, 0);
|
|
|
|
pktlen = initialize_udp_header(test_params->pkt_udp_hdr, src_port,
|
|
dst_port_0, 16);
|
|
pktlen = initialize_ipv4_header(test_params->pkt_ipv4_hdr, src_addr,
|
|
dst_addr_0, pktlen);
|
|
|
|
burst_size = 20 * test_params->bonded_slave_count;
|
|
|
|
TEST_ASSERT(burst_size < MAX_PKT_BURST,
|
|
"Burst size specified is greater than supported.");
|
|
|
|
/* Generate a burst of packets to transmit */
|
|
TEST_ASSERT_EQUAL(generate_packet_burst(test_params->mbuf_pool,
|
|
pkts_burst, test_params->pkt_eth_hdr, 0, test_params->pkt_ipv4_hdr,
|
|
1, test_params->pkt_udp_hdr, burst_size, PACKET_BURST_GEN_PKT_LEN,
|
|
1), burst_size, "Failed to generate packet burst");
|
|
|
|
/* Send burst on bonded port */
|
|
TEST_ASSERT_EQUAL(rte_eth_tx_burst(test_params->bonded_port_id, 0,
|
|
pkts_burst, burst_size), burst_size,
|
|
"Bonded Port (%d) rx burst failed, packets transmitted value "
|
|
"not as expected (%d)",
|
|
test_params->bonded_port_id, burst_size);
|
|
|
|
/* Verify bonded port tx stats */
|
|
rte_eth_stats_get(test_params->bonded_port_id, &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets,
|
|
(uint64_t)burst_size * test_params->bonded_slave_count,
|
|
"Bonded Port (%d) opackets value (%u) not as expected (%d)",
|
|
test_params->bonded_port_id, (unsigned int)port_stats.opackets,
|
|
burst_size);
|
|
|
|
/* Verify slave ports tx stats */
|
|
for (i = 0; i < test_params->bonded_slave_count; i++) {
|
|
rte_eth_stats_get(test_params->slave_port_ids[i], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, (uint64_t)burst_size,
|
|
"Slave Port (%d) opackets value (%u) not as expected (%d)\n",
|
|
test_params->bonded_port_id,
|
|
(unsigned int)port_stats.opackets, burst_size);
|
|
}
|
|
|
|
/* Put all slaves down and try and transmit */
|
|
for (i = 0; i < test_params->bonded_slave_count; i++) {
|
|
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[i], 0);
|
|
}
|
|
|
|
/* Send burst on bonded port */
|
|
TEST_ASSERT_EQUAL(rte_eth_tx_burst(
|
|
test_params->bonded_port_id, 0, pkts_burst, burst_size), 0,
|
|
"transmitted an unexpected number of packets");
|
|
|
|
/* Clean up and remove slaves from bonded device */
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
|
|
|
|
#define TEST_BCAST_SLAVE_TX_FAIL_SLAVE_COUNT (3)
|
|
#define TEST_BCAST_SLAVE_TX_FAIL_BURST_SIZE (40)
|
|
#define TEST_BCAST_SLAVE_TX_FAIL_MAX_PACKETS_COUNT (15)
|
|
#define TEST_BCAST_SLAVE_TX_FAIL_MIN_PACKETS_COUNT (10)
|
|
|
|
static int
|
|
test_broadcast_tx_burst_slave_tx_fail(void)
|
|
{
|
|
struct rte_mbuf *pkts_burst[TEST_BCAST_SLAVE_TX_FAIL_BURST_SIZE];
|
|
struct rte_mbuf *expected_fail_pkts[TEST_BCAST_SLAVE_TX_FAIL_MIN_PACKETS_COUNT];
|
|
|
|
struct rte_eth_stats port_stats;
|
|
|
|
int i, tx_count;
|
|
|
|
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
|
|
BONDING_MODE_BROADCAST, 0,
|
|
TEST_BCAST_SLAVE_TX_FAIL_SLAVE_COUNT, 1),
|
|
"Failed to intialise bonded device");
|
|
|
|
/* Generate test bursts for transmission */
|
|
TEST_ASSERT_EQUAL(generate_test_burst(pkts_burst,
|
|
TEST_BCAST_SLAVE_TX_FAIL_BURST_SIZE, 0, 0, 0, 0, 0),
|
|
TEST_BCAST_SLAVE_TX_FAIL_BURST_SIZE,
|
|
"Failed to generate test packet burst");
|
|
|
|
for (i = 0; i < TEST_BCAST_SLAVE_TX_FAIL_MIN_PACKETS_COUNT; i++) {
|
|
expected_fail_pkts[i] = pkts_burst[TEST_BCAST_SLAVE_TX_FAIL_BURST_SIZE -
|
|
TEST_BCAST_SLAVE_TX_FAIL_MIN_PACKETS_COUNT + i];
|
|
}
|
|
|
|
/* Set virtual slave TEST_BAL_SLAVE_TX_FAIL_FAILING_SLAVE_IDX to only fail
|
|
* transmission of TEST_BAL_SLAVE_TX_FAIL_PACKETS_COUNT packets of burst */
|
|
virtual_ethdev_tx_burst_fn_set_success(
|
|
test_params->slave_port_ids[0],
|
|
0);
|
|
virtual_ethdev_tx_burst_fn_set_success(
|
|
test_params->slave_port_ids[1],
|
|
0);
|
|
virtual_ethdev_tx_burst_fn_set_success(
|
|
test_params->slave_port_ids[2],
|
|
0);
|
|
|
|
virtual_ethdev_tx_burst_fn_set_tx_pkt_fail_count(
|
|
test_params->slave_port_ids[0],
|
|
TEST_BCAST_SLAVE_TX_FAIL_MAX_PACKETS_COUNT);
|
|
|
|
virtual_ethdev_tx_burst_fn_set_tx_pkt_fail_count(
|
|
test_params->slave_port_ids[1],
|
|
TEST_BCAST_SLAVE_TX_FAIL_MIN_PACKETS_COUNT);
|
|
|
|
virtual_ethdev_tx_burst_fn_set_tx_pkt_fail_count(
|
|
test_params->slave_port_ids[2],
|
|
TEST_BCAST_SLAVE_TX_FAIL_MAX_PACKETS_COUNT);
|
|
|
|
/* Transmit burst */
|
|
tx_count = rte_eth_tx_burst(test_params->bonded_port_id, 0, pkts_burst,
|
|
TEST_BCAST_SLAVE_TX_FAIL_BURST_SIZE);
|
|
|
|
TEST_ASSERT_EQUAL(tx_count, TEST_BCAST_SLAVE_TX_FAIL_BURST_SIZE -
|
|
TEST_BCAST_SLAVE_TX_FAIL_MIN_PACKETS_COUNT,
|
|
"Transmitted (%d) packets, expected to transmit (%d) packets",
|
|
tx_count, TEST_BCAST_SLAVE_TX_FAIL_BURST_SIZE -
|
|
TEST_BCAST_SLAVE_TX_FAIL_MIN_PACKETS_COUNT);
|
|
|
|
/* Verify that failed packet are expected failed packets */
|
|
for (i = 0; i < TEST_BCAST_SLAVE_TX_FAIL_MIN_PACKETS_COUNT; i++) {
|
|
TEST_ASSERT_EQUAL(expected_fail_pkts[i], pkts_burst[i + tx_count],
|
|
"expected mbuf (%d) pointer %p not expected pointer %p",
|
|
i, expected_fail_pkts[i], pkts_burst[i + tx_count]);
|
|
}
|
|
|
|
/* Verify slave ports tx stats */
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[0], &port_stats);
|
|
|
|
TEST_ASSERT_EQUAL(port_stats.opackets,
|
|
(uint64_t)TEST_BCAST_SLAVE_TX_FAIL_BURST_SIZE -
|
|
TEST_BCAST_SLAVE_TX_FAIL_MAX_PACKETS_COUNT,
|
|
"Port (%d) opackets value (%u) not as expected (%d)",
|
|
test_params->bonded_port_id, (unsigned int)port_stats.opackets,
|
|
TEST_BCAST_SLAVE_TX_FAIL_BURST_SIZE -
|
|
TEST_BCAST_SLAVE_TX_FAIL_MAX_PACKETS_COUNT);
|
|
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[1], &port_stats);
|
|
|
|
TEST_ASSERT_EQUAL(port_stats.opackets,
|
|
(uint64_t)TEST_BCAST_SLAVE_TX_FAIL_BURST_SIZE -
|
|
TEST_BCAST_SLAVE_TX_FAIL_MIN_PACKETS_COUNT,
|
|
"Port (%d) opackets value (%u) not as expected (%d)",
|
|
test_params->bonded_port_id, (unsigned int)port_stats.opackets,
|
|
TEST_BCAST_SLAVE_TX_FAIL_BURST_SIZE -
|
|
TEST_BCAST_SLAVE_TX_FAIL_MIN_PACKETS_COUNT);
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[2], &port_stats);
|
|
|
|
TEST_ASSERT_EQUAL(port_stats.opackets,
|
|
(uint64_t)TEST_BCAST_SLAVE_TX_FAIL_BURST_SIZE -
|
|
TEST_BCAST_SLAVE_TX_FAIL_MAX_PACKETS_COUNT,
|
|
"Port (%d) opackets value (%u) not as expected (%d)",
|
|
test_params->bonded_port_id, (unsigned int)port_stats.opackets,
|
|
TEST_BCAST_SLAVE_TX_FAIL_BURST_SIZE -
|
|
TEST_BCAST_SLAVE_TX_FAIL_MAX_PACKETS_COUNT);
|
|
|
|
|
|
/* Verify that all mbufs who transmission failed have a ref value of one */
|
|
TEST_ASSERT_SUCCESS(verify_mbufs_ref_count(&pkts_burst[tx_count],
|
|
TEST_BCAST_SLAVE_TX_FAIL_MIN_PACKETS_COUNT, 1),
|
|
"mbufs refcnts not as expected");
|
|
|
|
free_mbufs(&pkts_burst[tx_count],
|
|
TEST_BCAST_SLAVE_TX_FAIL_MIN_PACKETS_COUNT);
|
|
|
|
/* Clean up and remove slaves from bonded device */
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
|
|
#define BROADCAST_RX_BURST_NUM_OF_SLAVES (3)
|
|
|
|
static int
|
|
test_broadcast_rx_burst(void)
|
|
{
|
|
struct rte_mbuf *gen_pkt_burst[BROADCAST_RX_BURST_NUM_OF_SLAVES][MAX_PKT_BURST];
|
|
|
|
struct rte_mbuf *rx_pkt_burst[MAX_PKT_BURST] = { NULL };
|
|
struct rte_eth_stats port_stats;
|
|
|
|
int burst_size[BROADCAST_RX_BURST_NUM_OF_SLAVES] = { 10, 5, 30 };
|
|
int i, j;
|
|
|
|
memset(gen_pkt_burst, 0, sizeof(gen_pkt_burst));
|
|
|
|
/* Initialize bonded device with 4 slaves in round robin mode */
|
|
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
|
|
BONDING_MODE_BROADCAST, 0, 3, 1),
|
|
"Failed to intialise bonded device");
|
|
|
|
/* Generate test bursts of packets to transmit */
|
|
for (i = 0; i < BROADCAST_RX_BURST_NUM_OF_SLAVES; i++) {
|
|
TEST_ASSERT_EQUAL(generate_test_burst(
|
|
&gen_pkt_burst[i][0], burst_size[i], 0, 0, 1, 0, 0),
|
|
burst_size[i], "failed to generate packet burst");
|
|
}
|
|
|
|
/* Add rx data to slave 0 */
|
|
for (i = 0; i < BROADCAST_RX_BURST_NUM_OF_SLAVES; i++) {
|
|
virtual_ethdev_add_mbufs_to_rx_queue(test_params->slave_port_ids[i],
|
|
&gen_pkt_burst[i][0], burst_size[i]);
|
|
}
|
|
|
|
|
|
/* Call rx burst on bonded device */
|
|
/* Send burst on bonded port */
|
|
TEST_ASSERT_EQUAL(rte_eth_rx_burst(
|
|
test_params->bonded_port_id, 0, rx_pkt_burst, MAX_PKT_BURST),
|
|
burst_size[0] + burst_size[1] + burst_size[2],
|
|
"rx burst failed");
|
|
|
|
/* Verify bonded device rx count */
|
|
rte_eth_stats_get(test_params->bonded_port_id, &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.ipackets,
|
|
(uint64_t)(burst_size[0] + burst_size[1] + burst_size[2]),
|
|
"Bonded Port (%d) ipackets value (%u) not as expected (%d)",
|
|
test_params->bonded_port_id, (unsigned int)port_stats.ipackets,
|
|
burst_size[0] + burst_size[1] + burst_size[2]);
|
|
|
|
|
|
/* Verify bonded slave devices rx counts */
|
|
rte_eth_stats_get(test_params->slave_port_ids[0], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.ipackets, (uint64_t)burst_size[0],
|
|
"Slave Port (%d) ipackets value (%u) not as expected (%d)",
|
|
test_params->slave_port_ids[0], (unsigned int)port_stats.ipackets,
|
|
burst_size[0]);
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[1], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.ipackets, (uint64_t)burst_size[1],
|
|
"Slave Port (%d) ipackets value (%u) not as expected (%d)",
|
|
test_params->slave_port_ids[0], (unsigned int)port_stats.ipackets,
|
|
burst_size[1]);
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[2], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.ipackets, (uint64_t)burst_size[2],
|
|
"Slave Port (%d) ipackets value (%u) not as expected (%d)",
|
|
test_params->slave_port_ids[2], (unsigned int)port_stats.ipackets,
|
|
burst_size[2]);
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[3], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.ipackets, 0,
|
|
"Slave Port (%d) ipackets value (%u) not as expected (%d)",
|
|
test_params->slave_port_ids[3], (unsigned int)port_stats.ipackets,
|
|
0);
|
|
|
|
/* free mbufs allocate for rx testing */
|
|
for (i = 0; i < BROADCAST_RX_BURST_NUM_OF_SLAVES; i++) {
|
|
for (j = 0; j < MAX_PKT_BURST; j++) {
|
|
if (gen_pkt_burst[i][j] != NULL) {
|
|
rte_pktmbuf_free(gen_pkt_burst[i][j]);
|
|
gen_pkt_burst[i][j] = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Clean up and remove slaves from bonded device */
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
|
|
static int
|
|
test_broadcast_verify_promiscuous_enable_disable(void)
|
|
{
|
|
int i;
|
|
|
|
/* Initialize bonded device with 4 slaves in round robin mode */
|
|
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
|
|
BONDING_MODE_BROADCAST, 0, 4, 1),
|
|
"Failed to intialise bonded device");
|
|
|
|
rte_eth_promiscuous_enable(test_params->bonded_port_id);
|
|
|
|
|
|
TEST_ASSERT_EQUAL(rte_eth_promiscuous_get(test_params->bonded_port_id), 1,
|
|
"Port (%d) promiscuous mode not enabled",
|
|
test_params->bonded_port_id);
|
|
|
|
for (i = 0; i < test_params->bonded_slave_count; i++) {
|
|
TEST_ASSERT_EQUAL(rte_eth_promiscuous_get(
|
|
test_params->slave_port_ids[i]), 1,
|
|
"Port (%d) promiscuous mode not enabled",
|
|
test_params->slave_port_ids[i]);
|
|
}
|
|
|
|
rte_eth_promiscuous_disable(test_params->bonded_port_id);
|
|
|
|
TEST_ASSERT_EQUAL(rte_eth_promiscuous_get(test_params->bonded_port_id), 0,
|
|
"Port (%d) promiscuous mode not disabled",
|
|
test_params->bonded_port_id);
|
|
|
|
for (i = 0; i < test_params->bonded_slave_count; i++) {
|
|
TEST_ASSERT_EQUAL(rte_eth_promiscuous_get(
|
|
test_params->slave_port_ids[i]), 0,
|
|
"Port (%d) promiscuous mode not disabled",
|
|
test_params->slave_port_ids[i]);
|
|
}
|
|
|
|
/* Clean up and remove slaves from bonded device */
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
|
|
static int
|
|
test_broadcast_verify_mac_assignment(void)
|
|
{
|
|
struct ether_addr read_mac_addr, expected_mac_addr_0, expected_mac_addr_1;
|
|
|
|
int i;
|
|
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[0], &expected_mac_addr_0);
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[2], &expected_mac_addr_1);
|
|
|
|
/* Initialize bonded device with 4 slaves in round robin mode */
|
|
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
|
|
BONDING_MODE_BROADCAST, 0, 4, 1),
|
|
"Failed to intialise bonded device");
|
|
|
|
/* Verify that all MACs are the same as first slave added to bonded
|
|
* device */
|
|
for (i = 0; i < test_params->bonded_slave_count; i++) {
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[i], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_0, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port (%d) mac address not set to that of primary port",
|
|
test_params->slave_port_ids[i]);
|
|
}
|
|
|
|
/* change primary and verify that MAC addresses haven't changed */
|
|
TEST_ASSERT_SUCCESS(rte_eth_bond_primary_set(test_params->bonded_port_id,
|
|
test_params->slave_port_ids[2]),
|
|
"Failed to set bonded port (%d) primary port to (%d)",
|
|
test_params->bonded_port_id, test_params->slave_port_ids[i]);
|
|
|
|
for (i = 0; i < test_params->bonded_slave_count; i++) {
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[i], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_0, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port (%d) mac address has changed to that of primary "
|
|
"port without stop/start toggle of bonded device",
|
|
test_params->slave_port_ids[i]);
|
|
}
|
|
|
|
/* stop / start bonded device and verify that primary MAC address is
|
|
* propagated to bonded device and slaves */
|
|
|
|
rte_eth_dev_stop(test_params->bonded_port_id);
|
|
|
|
TEST_ASSERT_SUCCESS(rte_eth_dev_start(test_params->bonded_port_id),
|
|
"Failed to start bonded device");
|
|
|
|
rte_eth_macaddr_get(test_params->bonded_port_id, &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_1, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"bonded port (%d) mac address not set to that of new primary port",
|
|
test_params->slave_port_ids[i]);
|
|
|
|
for (i = 0; i < test_params->bonded_slave_count; i++) {
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[i], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_1, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port (%d) mac address not set to that of new primary "
|
|
"port", test_params->slave_port_ids[i]);
|
|
}
|
|
|
|
/* Set explicit MAC address */
|
|
TEST_ASSERT_SUCCESS(rte_eth_bond_mac_address_set(
|
|
test_params->bonded_port_id, (struct ether_addr *)bonded_mac),
|
|
"Failed to set MAC address");
|
|
|
|
rte_eth_macaddr_get(test_params->bonded_port_id, &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(bonded_mac, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"bonded port (%d) mac address not set to that of new primary port",
|
|
test_params->slave_port_ids[i]);
|
|
|
|
|
|
for (i = 0; i < test_params->bonded_slave_count; i++) {
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[i], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(bonded_mac, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port (%d) mac address not set to that of new primary "
|
|
"port", test_params->slave_port_ids[i]);
|
|
}
|
|
|
|
/* Clean up and remove slaves from bonded device */
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
|
|
#define BROADCAST_LINK_STATUS_NUM_OF_SLAVES (4)
|
|
static int
|
|
test_broadcast_verify_slave_link_status_change_behaviour(void)
|
|
{
|
|
struct rte_mbuf *pkt_burst[BROADCAST_LINK_STATUS_NUM_OF_SLAVES][MAX_PKT_BURST];
|
|
struct rte_mbuf *rx_pkt_burst[MAX_PKT_BURST] = { NULL };
|
|
struct rte_eth_stats port_stats;
|
|
|
|
uint8_t slaves[RTE_MAX_ETHPORTS];
|
|
|
|
int i, j, burst_size, slave_count;
|
|
|
|
memset(pkt_burst, 0, sizeof(pkt_burst));
|
|
|
|
/* Initialize bonded device with 4 slaves in round robin mode */
|
|
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
|
|
BONDING_MODE_BROADCAST, 0, BROADCAST_LINK_STATUS_NUM_OF_SLAVES,
|
|
1), "Failed to intialise bonded device");
|
|
|
|
/* Verify Current Slaves Count /Active Slave Count is */
|
|
slave_count = rte_eth_bond_slaves_get(test_params->bonded_port_id, slaves,
|
|
RTE_MAX_ETHPORTS);
|
|
TEST_ASSERT_EQUAL(slave_count, 4,
|
|
"Number of slaves (%d) is not as expected (%d).",
|
|
slave_count, 4);
|
|
|
|
slave_count = rte_eth_bond_active_slaves_get(test_params->bonded_port_id,
|
|
slaves, RTE_MAX_ETHPORTS);
|
|
TEST_ASSERT_EQUAL(slave_count, 4,
|
|
"Number of active slaves (%d) is not as expected (%d).",
|
|
slave_count, 4);
|
|
|
|
/* Set 2 slaves link status to down */
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[1], 0);
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[3], 0);
|
|
|
|
slave_count = rte_eth_bond_active_slaves_get(test_params->bonded_port_id,
|
|
slaves, RTE_MAX_ETHPORTS);
|
|
TEST_ASSERT_EQUAL(slave_count, 2,
|
|
"Number of active slaves (%d) is not as expected (%d).",
|
|
slave_count, 2);
|
|
|
|
for (i = 0; i < test_params->bonded_slave_count; i++)
|
|
rte_eth_stats_reset(test_params->slave_port_ids[i]);
|
|
|
|
/* Verify that pkts are not sent on slaves with link status down */
|
|
burst_size = 21;
|
|
|
|
TEST_ASSERT_EQUAL(generate_test_burst(
|
|
&pkt_burst[0][0], burst_size, 0, 0, 1, 0, 0), burst_size,
|
|
"generate_test_burst failed");
|
|
|
|
TEST_ASSERT_EQUAL(rte_eth_tx_burst(test_params->bonded_port_id, 0,
|
|
&pkt_burst[0][0], burst_size), burst_size,
|
|
"rte_eth_tx_burst failed\n");
|
|
|
|
rte_eth_stats_get(test_params->bonded_port_id, &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, (uint64_t)(burst_size * slave_count),
|
|
"(%d) port_stats.opackets (%d) not as expected (%d)\n",
|
|
test_params->bonded_port_id, (int)port_stats.opackets,
|
|
burst_size * slave_count);
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[0], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, (uint64_t)burst_size,
|
|
"(%d) port_stats.opackets not as expected",
|
|
test_params->slave_port_ids[0]);
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[1], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, 0,
|
|
"(%d) port_stats.opackets not as expected",
|
|
test_params->slave_port_ids[1]);
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[2], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, (uint64_t)burst_size,
|
|
"(%d) port_stats.opackets not as expected",
|
|
test_params->slave_port_ids[2]);
|
|
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[3], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, 0,
|
|
"(%d) port_stats.opackets not as expected",
|
|
test_params->slave_port_ids[3]);
|
|
|
|
|
|
for (i = 0; i < BROADCAST_LINK_STATUS_NUM_OF_SLAVES; i++) {
|
|
TEST_ASSERT_EQUAL(generate_test_burst(
|
|
&pkt_burst[i][0], burst_size, 0, 0, 1, 0, 0),
|
|
burst_size, "failed to generate packet burst");
|
|
|
|
virtual_ethdev_add_mbufs_to_rx_queue(test_params->slave_port_ids[i],
|
|
&pkt_burst[i][0], burst_size);
|
|
}
|
|
|
|
/* Verify that pkts are not received on slaves with link status down */
|
|
TEST_ASSERT_EQUAL(rte_eth_rx_burst(
|
|
test_params->bonded_port_id, 0, rx_pkt_burst, MAX_PKT_BURST),
|
|
burst_size + burst_size, "rte_eth_rx_burst failed");
|
|
|
|
|
|
/* Verify bonded device rx count */
|
|
rte_eth_stats_get(test_params->bonded_port_id, &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.ipackets, (uint64_t)(burst_size + burst_size),
|
|
"(%d) port_stats.ipackets not as expected\n",
|
|
test_params->bonded_port_id);
|
|
|
|
/* free mbufs allocate for rx testing */
|
|
for (i = 0; i < BROADCAST_LINK_STATUS_NUM_OF_SLAVES; i++) {
|
|
for (j = 0; j < MAX_PKT_BURST; j++) {
|
|
if (pkt_burst[i][j] != NULL) {
|
|
rte_pktmbuf_free(pkt_burst[i][j]);
|
|
pkt_burst[i][j] = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Clean up and remove slaves from bonded device */
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
#endif
|
|
|
|
static int
|
|
test_reconfigure_bonded_device(void)
|
|
{
|
|
test_params->nb_rx_q = 4;
|
|
test_params->nb_tx_q = 4;
|
|
|
|
TEST_ASSERT_SUCCESS(configure_ethdev(test_params->bonded_port_id, 0, 0),
|
|
"failed to reconfigure bonded device");
|
|
|
|
test_params->nb_rx_q = 2;
|
|
test_params->nb_tx_q = 2;
|
|
|
|
TEST_ASSERT_SUCCESS(configure_ethdev(test_params->bonded_port_id, 0, 0),
|
|
"failed to reconfigure bonded device with less rx/tx queues");
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int
|
|
test_close_bonded_device(void)
|
|
{
|
|
rte_eth_dev_close(test_params->bonded_port_id);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
testsuite_teardown(void)
|
|
{
|
|
if (test_params->pkt_eth_hdr != NULL) {
|
|
free(test_params->pkt_eth_hdr);
|
|
test_params->pkt_eth_hdr = NULL;
|
|
}
|
|
|
|
/* Clean up and remove slaves from bonded device */
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
|
|
static int
|
|
test_tlb_tx_burst(void)
|
|
{
|
|
int i, burst_size, nb_tx;
|
|
uint64_t nb_tx2 = 0;
|
|
struct rte_mbuf *pkt_burst[MAX_PKT_BURST];
|
|
struct rte_eth_stats port_stats[32];
|
|
uint64_t sum_ports_opackets = 0, all_bond_opackets = 0, all_bond_obytes = 0;
|
|
uint16_t pktlen;
|
|
uint64_t floor_obytes = 0, ceiling_obytes = 0;
|
|
|
|
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves
|
|
(BONDING_MODE_ADAPTIVE_TRANSMIT_LOAD_BALANCING, 1, 3, 1),
|
|
"Failed to initialise bonded device");
|
|
|
|
burst_size = 20 * test_params->bonded_slave_count;
|
|
|
|
TEST_ASSERT(burst_size < MAX_PKT_BURST,
|
|
"Burst size specified is greater than supported.\n");
|
|
|
|
|
|
/* Generate 400000 test bursts in 2s of packets to transmit */
|
|
for (i = 0; i < 400000; i++) {
|
|
/*test two types of mac src own(bonding) and others */
|
|
if (i % 2 == 0) {
|
|
initialize_eth_header(test_params->pkt_eth_hdr,
|
|
(struct ether_addr *)src_mac,
|
|
(struct ether_addr *)dst_mac_0, 0, 0);
|
|
} else {
|
|
initialize_eth_header(test_params->pkt_eth_hdr,
|
|
(struct ether_addr *)test_params->default_slave_mac,
|
|
(struct ether_addr *)dst_mac_0, 0, 0);
|
|
}
|
|
pktlen = initialize_udp_header(test_params->pkt_udp_hdr, src_port,
|
|
dst_port_0, 16);
|
|
pktlen = initialize_ipv4_header(test_params->pkt_ipv4_hdr, src_addr,
|
|
dst_addr_0, pktlen);
|
|
generate_packet_burst(test_params->mbuf_pool, pkt_burst,
|
|
test_params->pkt_eth_hdr, 0, test_params->pkt_ipv4_hdr,
|
|
1, test_params->pkt_udp_hdr, burst_size, 60, 1);
|
|
/* Send burst on bonded port */
|
|
nb_tx = rte_eth_tx_burst(test_params->bonded_port_id, 0, pkt_burst,
|
|
burst_size);
|
|
nb_tx2 += nb_tx;
|
|
|
|
TEST_ASSERT_EQUAL(nb_tx, burst_size,
|
|
"number of packet not equal burst size");
|
|
|
|
rte_delay_us(5);
|
|
}
|
|
|
|
|
|
/* Verify bonded port tx stats */
|
|
rte_eth_stats_get(test_params->bonded_port_id, &port_stats[0]);
|
|
|
|
all_bond_opackets = port_stats[0].opackets;
|
|
all_bond_obytes = port_stats[0].obytes;
|
|
|
|
TEST_ASSERT_EQUAL(port_stats[0].opackets, (uint64_t)nb_tx2,
|
|
"Bonded Port (%d) opackets value (%u) not as expected (%d)\n",
|
|
test_params->bonded_port_id, (unsigned int)port_stats[0].opackets,
|
|
burst_size);
|
|
|
|
|
|
/* Verify slave ports tx stats */
|
|
for (i = 0; i < test_params->bonded_slave_count; i++) {
|
|
rte_eth_stats_get(test_params->slave_port_ids[i], &port_stats[i]);
|
|
sum_ports_opackets += port_stats[i].opackets;
|
|
}
|
|
|
|
TEST_ASSERT_EQUAL(sum_ports_opackets, (uint64_t)all_bond_opackets,
|
|
"Total packets sent by slaves is not equal to packets sent by bond interface");
|
|
/* distribution of packets on each slave within +/- 10% of the expected value. */
|
|
for (i = 0; i < test_params->bonded_slave_count; i++) {
|
|
|
|
floor_obytes = (all_bond_obytes*90)/(test_params->bonded_slave_count*100);
|
|
ceiling_obytes = (all_bond_obytes*110)/(test_params->bonded_slave_count*100);
|
|
TEST_ASSERT(port_stats[i].obytes >= floor_obytes &&
|
|
port_stats[i].obytes <= ceiling_obytes,
|
|
"Distribution is not even");
|
|
}
|
|
/* Put all slaves down and try and transmit */
|
|
for (i = 0; i < test_params->bonded_slave_count; i++) {
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[i], 0);
|
|
}
|
|
|
|
/* Send burst on bonded port */
|
|
nb_tx = rte_eth_tx_burst(test_params->bonded_port_id, 0, pkt_burst,
|
|
burst_size);
|
|
TEST_ASSERT_EQUAL(nb_tx, 0, " bad number of packet in burst");
|
|
|
|
/* Clean ugit checkout masterp and remove slaves from bonded device */
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
|
|
#define TEST_ADAPTIVE_TRANSMIT_LOAD_BALANCING_RX_BURST_SLAVE_COUNT (4)
|
|
|
|
static int
|
|
test_tlb_rx_burst(void)
|
|
{
|
|
struct rte_mbuf *gen_pkt_burst[MAX_PKT_BURST] = { NULL };
|
|
struct rte_mbuf *rx_pkt_burst[MAX_PKT_BURST] = { NULL };
|
|
|
|
struct rte_eth_stats port_stats;
|
|
|
|
int primary_port;
|
|
|
|
uint16_t i, j, nb_rx, burst_size = 17;
|
|
|
|
/* Initialize bonded device with 4 slaves in transmit load balancing mode */
|
|
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
|
|
BONDING_MODE_ADAPTIVE_TRANSMIT_LOAD_BALANCING,
|
|
TEST_ADAPTIVE_TRANSMIT_LOAD_BALANCING_RX_BURST_SLAVE_COUNT, 1, 1),
|
|
"Failed to initialize bonded device");
|
|
|
|
|
|
primary_port = rte_eth_bond_primary_get(test_params->bonded_port_id);
|
|
TEST_ASSERT(primary_port >= 0,
|
|
"failed to get primary slave for bonded port (%d)",
|
|
test_params->bonded_port_id);
|
|
|
|
for (i = 0; i < test_params->bonded_slave_count; i++) {
|
|
/* Generate test bursts of packets to transmit */
|
|
TEST_ASSERT_EQUAL(generate_test_burst(
|
|
&gen_pkt_burst[0], burst_size, 0, 1, 0, 0, 0), burst_size,
|
|
"burst generation failed");
|
|
|
|
/* Add rx data to slave */
|
|
virtual_ethdev_add_mbufs_to_rx_queue(test_params->slave_port_ids[i],
|
|
&gen_pkt_burst[0], burst_size);
|
|
|
|
/* Call rx burst on bonded device */
|
|
nb_rx = rte_eth_rx_burst(test_params->bonded_port_id, 0,
|
|
&rx_pkt_burst[0], MAX_PKT_BURST);
|
|
|
|
TEST_ASSERT_EQUAL(nb_rx, burst_size, "rte_eth_rx_burst failed\n");
|
|
|
|
if (test_params->slave_port_ids[i] == primary_port) {
|
|
/* Verify bonded device rx count */
|
|
rte_eth_stats_get(test_params->bonded_port_id, &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.ipackets, (uint64_t)burst_size,
|
|
"Bonded Port (%d) ipackets value (%u) not as expected (%d)\n",
|
|
test_params->bonded_port_id,
|
|
(unsigned int)port_stats.ipackets, burst_size);
|
|
|
|
/* Verify bonded slave devices rx count */
|
|
for (j = 0; j < test_params->bonded_slave_count; j++) {
|
|
rte_eth_stats_get(test_params->slave_port_ids[j], &port_stats);
|
|
if (i == j) {
|
|
TEST_ASSERT_EQUAL(port_stats.ipackets, (uint64_t)burst_size,
|
|
"Slave Port (%d) ipackets value (%u) not as expected (%d)\n",
|
|
test_params->slave_port_ids[i],
|
|
(unsigned int)port_stats.ipackets, burst_size);
|
|
} else {
|
|
TEST_ASSERT_EQUAL(port_stats.ipackets, (uint64_t)0,
|
|
"Slave Port (%d) ipackets value (%u) not as expected (%d)\n",
|
|
test_params->slave_port_ids[i],
|
|
(unsigned int)port_stats.ipackets, 0);
|
|
}
|
|
}
|
|
} else {
|
|
for (j = 0; j < test_params->bonded_slave_count; j++) {
|
|
rte_eth_stats_get(test_params->slave_port_ids[j], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.ipackets, (uint64_t)0,
|
|
"Slave Port (%d) ipackets value (%u) not as expected (%d)\n",
|
|
test_params->slave_port_ids[i],
|
|
(unsigned int)port_stats.ipackets, 0);
|
|
}
|
|
}
|
|
|
|
/* free mbufs */
|
|
for (i = 0; i < burst_size; i++)
|
|
rte_pktmbuf_free(rx_pkt_burst[i]);
|
|
|
|
/* reset bonded device stats */
|
|
rte_eth_stats_reset(test_params->bonded_port_id);
|
|
}
|
|
|
|
/* Clean up and remove slaves from bonded device */
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
|
|
static int
|
|
test_tlb_verify_promiscuous_enable_disable(void)
|
|
{
|
|
int i, primary_port, promiscuous_en;
|
|
|
|
/* Initialize bonded device with 4 slaves in transmit load balancing mode */
|
|
TEST_ASSERT_SUCCESS( initialize_bonded_device_with_slaves(
|
|
BONDING_MODE_ADAPTIVE_TRANSMIT_LOAD_BALANCING, 0, 4, 1),
|
|
"Failed to initialize bonded device");
|
|
|
|
primary_port = rte_eth_bond_primary_get(test_params->bonded_port_id);
|
|
TEST_ASSERT(primary_port >= 0,
|
|
"failed to get primary slave for bonded port (%d)",
|
|
test_params->bonded_port_id);
|
|
|
|
rte_eth_promiscuous_enable(test_params->bonded_port_id);
|
|
|
|
promiscuous_en = rte_eth_promiscuous_get(test_params->bonded_port_id);
|
|
TEST_ASSERT_EQUAL(promiscuous_en, (int)1,
|
|
"Port (%d) promiscuous mode not enabled\n",
|
|
test_params->bonded_port_id);
|
|
for (i = 0; i < test_params->bonded_slave_count; i++) {
|
|
promiscuous_en = rte_eth_promiscuous_get(
|
|
test_params->slave_port_ids[i]);
|
|
if (primary_port == test_params->slave_port_ids[i]) {
|
|
TEST_ASSERT_EQUAL(promiscuous_en, (int)1,
|
|
"Port (%d) promiscuous mode not enabled\n",
|
|
test_params->bonded_port_id);
|
|
} else {
|
|
TEST_ASSERT_EQUAL(promiscuous_en, (int)0,
|
|
"Port (%d) promiscuous mode enabled\n",
|
|
test_params->bonded_port_id);
|
|
}
|
|
|
|
}
|
|
|
|
rte_eth_promiscuous_disable(test_params->bonded_port_id);
|
|
|
|
promiscuous_en = rte_eth_promiscuous_get(test_params->bonded_port_id);
|
|
TEST_ASSERT_EQUAL(promiscuous_en, (int)0,
|
|
"Port (%d) promiscuous mode not disabled\n",
|
|
test_params->bonded_port_id);
|
|
|
|
for (i = 0; i < test_params->bonded_slave_count; i++) {
|
|
promiscuous_en = rte_eth_promiscuous_get(
|
|
test_params->slave_port_ids[i]);
|
|
TEST_ASSERT_EQUAL(promiscuous_en, (int)0,
|
|
"slave port (%d) promiscuous mode not disabled\n",
|
|
test_params->slave_port_ids[i]);
|
|
}
|
|
|
|
/* Clean up and remove slaves from bonded device */
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
|
|
static int
|
|
test_tlb_verify_mac_assignment(void)
|
|
{
|
|
struct ether_addr read_mac_addr, expected_mac_addr_0, expected_mac_addr_1;
|
|
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[0], &expected_mac_addr_0);
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[1], &expected_mac_addr_1);
|
|
|
|
/* Initialize bonded device with 2 slaves in active backup mode */
|
|
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
|
|
BONDING_MODE_ADAPTIVE_TRANSMIT_LOAD_BALANCING, 0, 2, 1),
|
|
"Failed to initialize bonded device");
|
|
|
|
/* Verify that bonded MACs is that of first slave and that the other slave
|
|
* MAC hasn't been changed */
|
|
rte_eth_macaddr_get(test_params->bonded_port_id, &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_0, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"bonded port (%d) mac address not set to that of primary port",
|
|
test_params->bonded_port_id);
|
|
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[0], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_0, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port (%d) mac address not set to that of primary port",
|
|
test_params->slave_port_ids[0]);
|
|
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[1], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_1, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port (%d) mac address not as expected",
|
|
test_params->slave_port_ids[1]);
|
|
|
|
/* change primary and verify that MAC addresses haven't changed */
|
|
TEST_ASSERT_EQUAL(rte_eth_bond_primary_set(test_params->bonded_port_id,
|
|
test_params->slave_port_ids[1]), 0,
|
|
"Failed to set bonded port (%d) primary port to (%d)",
|
|
test_params->bonded_port_id, test_params->slave_port_ids[1]);
|
|
|
|
rte_eth_macaddr_get(test_params->bonded_port_id, &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_0, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"bonded port (%d) mac address not set to that of primary port",
|
|
test_params->bonded_port_id);
|
|
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[0], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_0, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port (%d) mac address not set to that of primary port",
|
|
test_params->slave_port_ids[0]);
|
|
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[1], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_1, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port (%d) mac address not as expected",
|
|
test_params->slave_port_ids[1]);
|
|
|
|
/* stop / start bonded device and verify that primary MAC address is
|
|
* propagated to bonded device and slaves */
|
|
|
|
rte_eth_dev_stop(test_params->bonded_port_id);
|
|
|
|
TEST_ASSERT_SUCCESS(rte_eth_dev_start(test_params->bonded_port_id),
|
|
"Failed to start device");
|
|
|
|
rte_eth_macaddr_get(test_params->bonded_port_id, &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_1, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"bonded port (%d) mac address not set to that of primary port",
|
|
test_params->bonded_port_id);
|
|
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[0], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_0, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port (%d) mac address not as expected",
|
|
test_params->slave_port_ids[0]);
|
|
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[1], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_1, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port (%d) mac address not set to that of primary port",
|
|
test_params->slave_port_ids[1]);
|
|
|
|
|
|
/* Set explicit MAC address */
|
|
TEST_ASSERT_SUCCESS(rte_eth_bond_mac_address_set(
|
|
test_params->bonded_port_id, (struct ether_addr *)bonded_mac),
|
|
"failed to set MAC addres");
|
|
|
|
rte_eth_macaddr_get(test_params->bonded_port_id, &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&bonded_mac, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"bonded port (%d) mac address not set to that of bonded port",
|
|
test_params->bonded_port_id);
|
|
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[0], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&expected_mac_addr_0, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port (%d) mac address not as expected",
|
|
test_params->slave_port_ids[0]);
|
|
|
|
rte_eth_macaddr_get(test_params->slave_port_ids[1], &read_mac_addr);
|
|
TEST_ASSERT_SUCCESS(memcmp(&bonded_mac, &read_mac_addr,
|
|
sizeof(read_mac_addr)),
|
|
"slave port (%d) mac address not set to that of bonded port",
|
|
test_params->slave_port_ids[1]);
|
|
|
|
/* Clean up and remove slaves from bonded device */
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
|
|
static int
|
|
test_tlb_verify_slave_link_status_change_failover(void)
|
|
{
|
|
struct rte_mbuf *pkt_burst[TEST_ADAPTIVE_TRANSMIT_LOAD_BALANCING_RX_BURST_SLAVE_COUNT][MAX_PKT_BURST];
|
|
struct rte_mbuf *rx_pkt_burst[MAX_PKT_BURST] = { NULL };
|
|
struct rte_eth_stats port_stats;
|
|
|
|
uint8_t slaves[RTE_MAX_ETHPORTS];
|
|
|
|
int i, j, burst_size, slave_count, primary_port;
|
|
|
|
burst_size = 21;
|
|
|
|
memset(pkt_burst, 0, sizeof(pkt_burst));
|
|
|
|
|
|
|
|
/* Initialize bonded device with 4 slaves in round robin mode */
|
|
TEST_ASSERT_SUCCESS(initialize_bonded_device_with_slaves(
|
|
BONDING_MODE_ADAPTIVE_TRANSMIT_LOAD_BALANCING, 0,
|
|
TEST_ADAPTIVE_TRANSMIT_LOAD_BALANCING_RX_BURST_SLAVE_COUNT, 1),
|
|
"Failed to initialize bonded device with slaves");
|
|
|
|
/* Verify Current Slaves Count /Active Slave Count is */
|
|
slave_count = rte_eth_bond_slaves_get(test_params->bonded_port_id, slaves,
|
|
RTE_MAX_ETHPORTS);
|
|
TEST_ASSERT_EQUAL(slave_count, 4,
|
|
"Number of slaves (%d) is not as expected (%d).\n",
|
|
slave_count, 4);
|
|
|
|
slave_count = rte_eth_bond_active_slaves_get(test_params->bonded_port_id,
|
|
slaves, RTE_MAX_ETHPORTS);
|
|
TEST_ASSERT_EQUAL(slave_count, (int)4,
|
|
"Number of slaves (%d) is not as expected (%d).\n",
|
|
slave_count, 4);
|
|
|
|
primary_port = rte_eth_bond_primary_get(test_params->bonded_port_id);
|
|
TEST_ASSERT_EQUAL(primary_port, test_params->slave_port_ids[0],
|
|
"Primary port not as expected");
|
|
|
|
/* Bring 2 slaves down and verify active slave count */
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[1], 0);
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[3], 0);
|
|
|
|
TEST_ASSERT_EQUAL(rte_eth_bond_active_slaves_get(
|
|
test_params->bonded_port_id, slaves, RTE_MAX_ETHPORTS), 2,
|
|
"Number of active slaves (%d) is not as expected (%d).",
|
|
slave_count, 2);
|
|
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[1], 1);
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[3], 1);
|
|
|
|
|
|
/* Bring primary port down, verify that active slave count is 3 and primary
|
|
* has changed */
|
|
virtual_ethdev_simulate_link_status_interrupt(
|
|
test_params->slave_port_ids[0], 0);
|
|
|
|
TEST_ASSERT_EQUAL(rte_eth_bond_active_slaves_get(
|
|
test_params->bonded_port_id, slaves, RTE_MAX_ETHPORTS), 3,
|
|
"Number of active slaves (%d) is not as expected (%d).",
|
|
slave_count, 3);
|
|
|
|
primary_port = rte_eth_bond_primary_get(test_params->bonded_port_id);
|
|
TEST_ASSERT_EQUAL(primary_port, test_params->slave_port_ids[2],
|
|
"Primary port not as expected");
|
|
rte_delay_us(500000);
|
|
/* Verify that pkts are sent on new primary slave */
|
|
for (i = 0; i < 4; i++) {
|
|
TEST_ASSERT_EQUAL(generate_test_burst(
|
|
&pkt_burst[0][0], burst_size, 0, 1, 0, 0, 0), burst_size,
|
|
"generate_test_burst failed\n");
|
|
TEST_ASSERT_EQUAL(rte_eth_tx_burst(
|
|
test_params->bonded_port_id, 0, &pkt_burst[0][0], burst_size), burst_size,
|
|
"rte_eth_tx_burst failed\n");
|
|
rte_delay_us(11000);
|
|
}
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[2], &port_stats);
|
|
TEST_ASSERT_NOT_EQUAL(port_stats.opackets, (int8_t)0,
|
|
"(%d) port_stats.opackets not as expected\n",
|
|
test_params->slave_port_ids[2]);
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[0], &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.opackets, (int8_t)0,
|
|
"(%d) port_stats.opackets not as expected\n",
|
|
test_params->slave_port_ids[0]);
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[1], &port_stats);
|
|
TEST_ASSERT_NOT_EQUAL(port_stats.opackets, (int8_t)0,
|
|
"(%d) port_stats.opackets not as expected\n",
|
|
test_params->slave_port_ids[1]);
|
|
|
|
rte_eth_stats_get(test_params->slave_port_ids[3], &port_stats);
|
|
TEST_ASSERT_NOT_EQUAL(port_stats.opackets, (int8_t)0,
|
|
"(%d) port_stats.opackets not as expected\n",
|
|
test_params->slave_port_ids[3]);
|
|
|
|
|
|
/* Generate packet burst for testing */
|
|
|
|
for (i = 0; i < TEST_ADAPTIVE_TRANSMIT_LOAD_BALANCING_RX_BURST_SLAVE_COUNT; i++) {
|
|
if (generate_test_burst(&pkt_burst[i][0], burst_size, 0, 1, 0, 0, 0) !=
|
|
burst_size)
|
|
return -1;
|
|
|
|
virtual_ethdev_add_mbufs_to_rx_queue(
|
|
test_params->slave_port_ids[i], &pkt_burst[i][0], burst_size);
|
|
}
|
|
|
|
if (rte_eth_rx_burst(test_params->bonded_port_id, 0, rx_pkt_burst,
|
|
MAX_PKT_BURST) != burst_size) {
|
|
printf("rte_eth_rx_burst\n");
|
|
return -1;
|
|
|
|
}
|
|
|
|
/* Verify bonded device rx count */
|
|
rte_eth_stats_get(test_params->bonded_port_id, &port_stats);
|
|
TEST_ASSERT_EQUAL(port_stats.ipackets, (uint64_t)burst_size,
|
|
"(%d) port_stats.ipackets not as expected\n",
|
|
test_params->bonded_port_id);
|
|
|
|
/* free mbufs */
|
|
|
|
for (i = 0; i < TEST_ADAPTIVE_TRANSMIT_LOAD_BALANCING_RX_BURST_SLAVE_COUNT; i++) {
|
|
for (j = 0; j < MAX_PKT_BURST; j++) {
|
|
if (pkt_burst[i][j] != NULL) {
|
|
rte_pktmbuf_free(pkt_burst[i][j]);
|
|
pkt_burst[i][j] = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/* Clean up and remove slaves from bonded device */
|
|
return remove_slaves_and_stop_bonded_device();
|
|
}
|
|
|
|
|
|
static struct unit_test_suite link_bonding_test_suite = {
|
|
.suite_name = "Link Bonding Unit Test Suite",
|
|
.setup = test_setup,
|
|
.teardown = testsuite_teardown,
|
|
.unit_test_cases = {
|
|
TEST_CASE(test_create_bonded_device),
|
|
TEST_CASE(test_create_bonded_device_with_invalid_params),
|
|
TEST_CASE(test_add_slave_to_bonded_device),
|
|
TEST_CASE(test_add_slave_to_invalid_bonded_device),
|
|
TEST_CASE(test_remove_slave_from_bonded_device),
|
|
TEST_CASE(test_remove_slave_from_invalid_bonded_device),
|
|
TEST_CASE(test_get_slaves_from_bonded_device),
|
|
TEST_CASE(test_add_already_bonded_slave_to_bonded_device),
|
|
TEST_CASE(test_add_remove_multiple_slaves_to_from_bonded_device),
|
|
TEST_CASE(test_start_bonded_device),
|
|
TEST_CASE(test_stop_bonded_device),
|
|
TEST_CASE(test_set_bonding_mode),
|
|
TEST_CASE(test_set_primary_slave),
|
|
TEST_CASE(test_set_explicit_bonded_mac),
|
|
TEST_CASE(test_set_bonded_port_initialization_mac_assignment),
|
|
TEST_CASE(test_status_interrupt),
|
|
TEST_CASE(test_adding_slave_after_bonded_device_started),
|
|
TEST_CASE(test_roundrobin_tx_burst),
|
|
TEST_CASE(test_roundrobin_tx_burst_slave_tx_fail),
|
|
TEST_CASE(test_roundrobin_rx_burst_on_single_slave),
|
|
TEST_CASE(test_roundrobin_rx_burst_on_multiple_slaves),
|
|
TEST_CASE(test_roundrobin_verify_promiscuous_enable_disable),
|
|
TEST_CASE(test_roundrobin_verify_mac_assignment),
|
|
TEST_CASE(test_roundrobin_verify_slave_link_status_change_behaviour),
|
|
TEST_CASE(test_roundrobin_verfiy_polling_slave_link_status_change),
|
|
TEST_CASE(test_activebackup_tx_burst),
|
|
TEST_CASE(test_activebackup_rx_burst),
|
|
TEST_CASE(test_activebackup_verify_promiscuous_enable_disable),
|
|
TEST_CASE(test_activebackup_verify_mac_assignment),
|
|
TEST_CASE(test_activebackup_verify_slave_link_status_change_failover),
|
|
TEST_CASE(test_balance_xmit_policy_configuration),
|
|
TEST_CASE(test_balance_l2_tx_burst),
|
|
TEST_CASE(test_balance_l23_tx_burst_ipv4_toggle_ip_addr),
|
|
TEST_CASE(test_balance_l23_tx_burst_vlan_ipv4_toggle_ip_addr),
|
|
TEST_CASE(test_balance_l23_tx_burst_ipv6_toggle_ip_addr),
|
|
TEST_CASE(test_balance_l23_tx_burst_vlan_ipv6_toggle_ip_addr),
|
|
TEST_CASE(test_balance_l23_tx_burst_toggle_mac_addr),
|
|
TEST_CASE(test_balance_l34_tx_burst_ipv4_toggle_ip_addr),
|
|
TEST_CASE(test_balance_l34_tx_burst_ipv4_toggle_udp_port),
|
|
TEST_CASE(test_balance_l34_tx_burst_vlan_ipv4_toggle_ip_addr),
|
|
TEST_CASE(test_balance_l34_tx_burst_ipv6_toggle_ip_addr),
|
|
TEST_CASE(test_balance_l34_tx_burst_vlan_ipv6_toggle_ip_addr),
|
|
TEST_CASE(test_balance_l34_tx_burst_ipv6_toggle_udp_port),
|
|
TEST_CASE(test_balance_tx_burst_slave_tx_fail),
|
|
TEST_CASE(test_balance_rx_burst),
|
|
TEST_CASE(test_balance_verify_promiscuous_enable_disable),
|
|
TEST_CASE(test_balance_verify_mac_assignment),
|
|
TEST_CASE(test_balance_verify_slave_link_status_change_behaviour),
|
|
TEST_CASE(test_tlb_tx_burst),
|
|
TEST_CASE(test_tlb_rx_burst),
|
|
TEST_CASE(test_tlb_verify_mac_assignment),
|
|
TEST_CASE(test_tlb_verify_promiscuous_enable_disable),
|
|
TEST_CASE(test_tlb_verify_slave_link_status_change_failover),
|
|
#ifdef RTE_MBUF_REFCNT
|
|
TEST_CASE(test_broadcast_tx_burst),
|
|
TEST_CASE(test_broadcast_tx_burst_slave_tx_fail),
|
|
TEST_CASE(test_broadcast_rx_burst),
|
|
TEST_CASE(test_broadcast_verify_promiscuous_enable_disable),
|
|
TEST_CASE(test_broadcast_verify_mac_assignment),
|
|
TEST_CASE(test_broadcast_verify_slave_link_status_change_behaviour),
|
|
#endif
|
|
TEST_CASE(test_reconfigure_bonded_device),
|
|
TEST_CASE(test_close_bonded_device),
|
|
|
|
{ NULL, NULL, NULL, NULL, NULL } /**< NULL terminate unit test array */
|
|
}
|
|
};
|
|
|
|
|
|
static int
|
|
test_link_bonding(void)
|
|
{
|
|
return unit_test_suite_runner(&link_bonding_test_suite);
|
|
}
|
|
|
|
static struct test_command link_bonding_cmd = {
|
|
.command = "link_bonding_autotest",
|
|
.callback = test_link_bonding,
|
|
};
|
|
REGISTER_TEST_COMMAND(link_bonding_cmd);
|