141c86f55f
PMD handles fast path completions in the Rx handler and control path
completions in the interrupt handler. They both are processing
completions from the same fastpath completion queue. There is a
potential for race condition when these two paths are processing
the completions from the same queue and trying to updating Rx Producer.
Add a fastpath Rx lock between these two paths to close this race.
Fixes: 540a211084
("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
11938 lines
316 KiB
C
11938 lines
316 KiB
C
/* SPDX-License-Identifier: BSD-3-Clause
|
|
* Copyright (c) 2007-2013 Broadcom Corporation.
|
|
*
|
|
* Eric Davis <edavis@broadcom.com>
|
|
* David Christensen <davidch@broadcom.com>
|
|
* Gary Zambrano <zambrano@broadcom.com>
|
|
*
|
|
* Copyright (c) 2013-2015 Brocade Communications Systems, Inc.
|
|
* Copyright (c) 2015-2018 Cavium Inc.
|
|
* All rights reserved.
|
|
* www.cavium.com
|
|
*/
|
|
|
|
#define BNX2X_DRIVER_VERSION "1.78.18"
|
|
|
|
#include "bnx2x.h"
|
|
#include "bnx2x_vfpf.h"
|
|
#include "ecore_sp.h"
|
|
#include "ecore_init.h"
|
|
#include "ecore_init_ops.h"
|
|
|
|
#include "rte_version.h"
|
|
|
|
#include <sys/types.h>
|
|
#include <sys/stat.h>
|
|
#include <fcntl.h>
|
|
#include <zlib.h>
|
|
#include <rte_string_fns.h>
|
|
|
|
#define BNX2X_PMD_VER_PREFIX "BNX2X PMD"
|
|
#define BNX2X_PMD_VERSION_MAJOR 1
|
|
#define BNX2X_PMD_VERSION_MINOR 1
|
|
#define BNX2X_PMD_VERSION_REVISION 0
|
|
#define BNX2X_PMD_VERSION_PATCH 1
|
|
|
|
static inline const char *
|
|
bnx2x_pmd_version(void)
|
|
{
|
|
static char version[32];
|
|
|
|
snprintf(version, sizeof(version), "%s %s_%d.%d.%d.%d",
|
|
BNX2X_PMD_VER_PREFIX,
|
|
BNX2X_DRIVER_VERSION,
|
|
BNX2X_PMD_VERSION_MAJOR,
|
|
BNX2X_PMD_VERSION_MINOR,
|
|
BNX2X_PMD_VERSION_REVISION,
|
|
BNX2X_PMD_VERSION_PATCH);
|
|
|
|
return version;
|
|
}
|
|
|
|
static z_stream zlib_stream;
|
|
|
|
#define EVL_VLID_MASK 0x0FFF
|
|
|
|
#define BNX2X_DEF_SB_ATT_IDX 0x0001
|
|
#define BNX2X_DEF_SB_IDX 0x0002
|
|
|
|
/*
|
|
* FLR Support - bnx2x_pf_flr_clnup() is called during nic_load in the per
|
|
* function HW initialization.
|
|
*/
|
|
#define FLR_WAIT_USEC 10000 /* 10 msecs */
|
|
#define FLR_WAIT_INTERVAL 50 /* usecs */
|
|
#define FLR_POLL_CNT (FLR_WAIT_USEC / FLR_WAIT_INTERVAL) /* 200 */
|
|
|
|
struct pbf_pN_buf_regs {
|
|
int pN;
|
|
uint32_t init_crd;
|
|
uint32_t crd;
|
|
uint32_t crd_freed;
|
|
};
|
|
|
|
struct pbf_pN_cmd_regs {
|
|
int pN;
|
|
uint32_t lines_occup;
|
|
uint32_t lines_freed;
|
|
};
|
|
|
|
/* resources needed for unloading a previously loaded device */
|
|
|
|
#define BNX2X_PREV_WAIT_NEEDED 1
|
|
rte_spinlock_t bnx2x_prev_mtx;
|
|
struct bnx2x_prev_list_node {
|
|
LIST_ENTRY(bnx2x_prev_list_node) node;
|
|
uint8_t bus;
|
|
uint8_t slot;
|
|
uint8_t path;
|
|
uint8_t aer;
|
|
uint8_t undi;
|
|
};
|
|
|
|
static LIST_HEAD(, bnx2x_prev_list_node) bnx2x_prev_list
|
|
= LIST_HEAD_INITIALIZER(bnx2x_prev_list);
|
|
|
|
static int load_count[2][3] = { { 0 } };
|
|
/* per-path: 0-common, 1-port0, 2-port1 */
|
|
|
|
static void bnx2x_cmng_fns_init(struct bnx2x_softc *sc, uint8_t read_cfg,
|
|
uint8_t cmng_type);
|
|
static int bnx2x_get_cmng_fns_mode(struct bnx2x_softc *sc);
|
|
static void storm_memset_cmng(struct bnx2x_softc *sc, struct cmng_init *cmng,
|
|
uint8_t port);
|
|
static void bnx2x_set_reset_global(struct bnx2x_softc *sc);
|
|
static void bnx2x_set_reset_in_progress(struct bnx2x_softc *sc);
|
|
static uint8_t bnx2x_reset_is_done(struct bnx2x_softc *sc, int engine);
|
|
static uint8_t bnx2x_clear_pf_load(struct bnx2x_softc *sc);
|
|
static uint8_t bnx2x_chk_parity_attn(struct bnx2x_softc *sc, uint8_t * global,
|
|
uint8_t print);
|
|
static void bnx2x_int_disable(struct bnx2x_softc *sc);
|
|
static int bnx2x_release_leader_lock(struct bnx2x_softc *sc);
|
|
static void bnx2x_pf_disable(struct bnx2x_softc *sc);
|
|
static void bnx2x_update_rx_prod(struct bnx2x_softc *sc,
|
|
struct bnx2x_fastpath *fp,
|
|
uint16_t rx_bd_prod, uint16_t rx_cq_prod);
|
|
static void bnx2x_link_report_locked(struct bnx2x_softc *sc);
|
|
static void bnx2x_link_report(struct bnx2x_softc *sc);
|
|
void bnx2x_link_status_update(struct bnx2x_softc *sc);
|
|
static int bnx2x_alloc_mem(struct bnx2x_softc *sc);
|
|
static void bnx2x_free_mem(struct bnx2x_softc *sc);
|
|
static int bnx2x_alloc_fw_stats_mem(struct bnx2x_softc *sc);
|
|
static void bnx2x_free_fw_stats_mem(struct bnx2x_softc *sc);
|
|
static __rte_noinline
|
|
int bnx2x_nic_load(struct bnx2x_softc *sc);
|
|
|
|
static int bnx2x_handle_sp_tq(struct bnx2x_softc *sc);
|
|
static void bnx2x_handle_fp_tq(struct bnx2x_fastpath *fp);
|
|
static void bnx2x_ack_sb(struct bnx2x_softc *sc, uint8_t igu_sb_id,
|
|
uint8_t storm, uint16_t index, uint8_t op,
|
|
uint8_t update);
|
|
|
|
int bnx2x_test_bit(int nr, volatile unsigned long *addr)
|
|
{
|
|
int res;
|
|
|
|
mb();
|
|
res = ((*addr) & (1UL << nr)) != 0;
|
|
mb();
|
|
return res;
|
|
}
|
|
|
|
void bnx2x_set_bit(unsigned int nr, volatile unsigned long *addr)
|
|
{
|
|
__sync_fetch_and_or(addr, (1UL << nr));
|
|
}
|
|
|
|
void bnx2x_clear_bit(int nr, volatile unsigned long *addr)
|
|
{
|
|
__sync_fetch_and_and(addr, ~(1UL << nr));
|
|
}
|
|
|
|
int bnx2x_test_and_clear_bit(int nr, volatile unsigned long *addr)
|
|
{
|
|
unsigned long mask = (1UL << nr);
|
|
return __sync_fetch_and_and(addr, ~mask) & mask;
|
|
}
|
|
|
|
int bnx2x_cmpxchg(volatile int *addr, int old, int new)
|
|
{
|
|
return __sync_val_compare_and_swap(addr, old, new);
|
|
}
|
|
|
|
int
|
|
bnx2x_dma_alloc(struct bnx2x_softc *sc, size_t size, struct bnx2x_dma *dma,
|
|
const char *msg, uint32_t align)
|
|
{
|
|
char mz_name[RTE_MEMZONE_NAMESIZE];
|
|
const struct rte_memzone *z;
|
|
|
|
dma->sc = sc;
|
|
if (IS_PF(sc))
|
|
snprintf(mz_name, sizeof(mz_name), "bnx2x%d_%s_%" PRIx64, SC_ABS_FUNC(sc), msg,
|
|
rte_get_timer_cycles());
|
|
else
|
|
snprintf(mz_name, sizeof(mz_name), "bnx2x%d_%s_%" PRIx64, sc->pcie_device, msg,
|
|
rte_get_timer_cycles());
|
|
|
|
/* Caller must take care that strlen(mz_name) < RTE_MEMZONE_NAMESIZE */
|
|
z = rte_memzone_reserve_aligned(mz_name, (uint64_t)size,
|
|
SOCKET_ID_ANY,
|
|
RTE_MEMZONE_IOVA_CONTIG, align);
|
|
if (z == NULL) {
|
|
PMD_DRV_LOG(ERR, sc, "DMA alloc failed for %s", msg);
|
|
return -ENOMEM;
|
|
}
|
|
dma->paddr = (uint64_t) z->iova;
|
|
dma->vaddr = z->addr;
|
|
dma->mzone = (const void *)z;
|
|
|
|
PMD_DRV_LOG(DEBUG, sc,
|
|
"%s: virt=%p phys=%" PRIx64, msg, dma->vaddr, dma->paddr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void bnx2x_dma_free(struct bnx2x_dma *dma)
|
|
{
|
|
if (dma->mzone == NULL)
|
|
return;
|
|
|
|
rte_memzone_free((const struct rte_memzone *)dma->mzone);
|
|
dma->sc = NULL;
|
|
dma->paddr = 0;
|
|
dma->vaddr = NULL;
|
|
dma->nseg = 0;
|
|
dma->mzone = NULL;
|
|
}
|
|
|
|
static int bnx2x_acquire_hw_lock(struct bnx2x_softc *sc, uint32_t resource)
|
|
{
|
|
uint32_t lock_status;
|
|
uint32_t resource_bit = (1 << resource);
|
|
int func = SC_FUNC(sc);
|
|
uint32_t hw_lock_control_reg;
|
|
int cnt;
|
|
|
|
#ifndef RTE_LIBRTE_BNX2X_DEBUG_PERIODIC
|
|
if (resource)
|
|
PMD_INIT_FUNC_TRACE(sc);
|
|
#else
|
|
PMD_INIT_FUNC_TRACE(sc);
|
|
#endif
|
|
|
|
/* validate the resource is within range */
|
|
if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
|
|
PMD_DRV_LOG(NOTICE, sc,
|
|
"resource 0x%x > HW_LOCK_MAX_RESOURCE_VALUE",
|
|
resource);
|
|
return -1;
|
|
}
|
|
|
|
if (func <= 5) {
|
|
hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + (func * 8));
|
|
} else {
|
|
hw_lock_control_reg =
|
|
(MISC_REG_DRIVER_CONTROL_7 + ((func - 6) * 8));
|
|
}
|
|
|
|
/* validate the resource is not already taken */
|
|
lock_status = REG_RD(sc, hw_lock_control_reg);
|
|
if (lock_status & resource_bit) {
|
|
PMD_DRV_LOG(NOTICE, sc,
|
|
"resource in use (status 0x%x bit 0x%x)",
|
|
lock_status, resource_bit);
|
|
return -1;
|
|
}
|
|
|
|
/* try every 5ms for 5 seconds */
|
|
for (cnt = 0; cnt < 1000; cnt++) {
|
|
REG_WR(sc, (hw_lock_control_reg + 4), resource_bit);
|
|
lock_status = REG_RD(sc, hw_lock_control_reg);
|
|
if (lock_status & resource_bit) {
|
|
return 0;
|
|
}
|
|
DELAY(5000);
|
|
}
|
|
|
|
PMD_DRV_LOG(NOTICE, sc, "Resource 0x%x resource_bit 0x%x lock timeout!",
|
|
resource, resource_bit);
|
|
return -1;
|
|
}
|
|
|
|
static int bnx2x_release_hw_lock(struct bnx2x_softc *sc, uint32_t resource)
|
|
{
|
|
uint32_t lock_status;
|
|
uint32_t resource_bit = (1 << resource);
|
|
int func = SC_FUNC(sc);
|
|
uint32_t hw_lock_control_reg;
|
|
|
|
#ifndef RTE_LIBRTE_BNX2X_DEBUG_PERIODIC
|
|
if (resource)
|
|
PMD_INIT_FUNC_TRACE(sc);
|
|
#else
|
|
PMD_INIT_FUNC_TRACE(sc);
|
|
#endif
|
|
|
|
/* validate the resource is within range */
|
|
if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
|
|
PMD_DRV_LOG(NOTICE, sc,
|
|
"(resource 0x%x > HW_LOCK_MAX_RESOURCE_VALUE)"
|
|
" resource_bit 0x%x", resource, resource_bit);
|
|
return -1;
|
|
}
|
|
|
|
if (func <= 5) {
|
|
hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + (func * 8));
|
|
} else {
|
|
hw_lock_control_reg =
|
|
(MISC_REG_DRIVER_CONTROL_7 + ((func - 6) * 8));
|
|
}
|
|
|
|
/* validate the resource is currently taken */
|
|
lock_status = REG_RD(sc, hw_lock_control_reg);
|
|
if (!(lock_status & resource_bit)) {
|
|
PMD_DRV_LOG(NOTICE, sc,
|
|
"resource not in use (status 0x%x bit 0x%x)",
|
|
lock_status, resource_bit);
|
|
return -1;
|
|
}
|
|
|
|
REG_WR(sc, hw_lock_control_reg, resource_bit);
|
|
return 0;
|
|
}
|
|
|
|
static void bnx2x_acquire_phy_lock(struct bnx2x_softc *sc)
|
|
{
|
|
BNX2X_PHY_LOCK(sc);
|
|
bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_MDIO);
|
|
}
|
|
|
|
static void bnx2x_release_phy_lock(struct bnx2x_softc *sc)
|
|
{
|
|
bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_MDIO);
|
|
BNX2X_PHY_UNLOCK(sc);
|
|
}
|
|
|
|
/* copy command into DMAE command memory and set DMAE command Go */
|
|
void bnx2x_post_dmae(struct bnx2x_softc *sc, struct dmae_command *dmae, int idx)
|
|
{
|
|
uint32_t cmd_offset;
|
|
uint32_t i;
|
|
|
|
cmd_offset = (DMAE_REG_CMD_MEM + (sizeof(struct dmae_command) * idx));
|
|
for (i = 0; i < ((sizeof(struct dmae_command) / 4)); i++) {
|
|
REG_WR(sc, (cmd_offset + (i * 4)), *(((uint32_t *) dmae) + i));
|
|
}
|
|
|
|
REG_WR(sc, dmae_reg_go_c[idx], 1);
|
|
}
|
|
|
|
uint32_t bnx2x_dmae_opcode_add_comp(uint32_t opcode, uint8_t comp_type)
|
|
{
|
|
return opcode | ((comp_type << DMAE_COMMAND_C_DST_SHIFT) |
|
|
DMAE_COMMAND_C_TYPE_ENABLE);
|
|
}
|
|
|
|
uint32_t bnx2x_dmae_opcode_clr_src_reset(uint32_t opcode)
|
|
{
|
|
return opcode & ~DMAE_COMMAND_SRC_RESET;
|
|
}
|
|
|
|
uint32_t
|
|
bnx2x_dmae_opcode(struct bnx2x_softc * sc, uint8_t src_type, uint8_t dst_type,
|
|
uint8_t with_comp, uint8_t comp_type)
|
|
{
|
|
uint32_t opcode = 0;
|
|
|
|
opcode |= ((src_type << DMAE_COMMAND_SRC_SHIFT) |
|
|
(dst_type << DMAE_COMMAND_DST_SHIFT));
|
|
|
|
opcode |= (DMAE_COMMAND_SRC_RESET | DMAE_COMMAND_DST_RESET);
|
|
|
|
opcode |= (SC_PORT(sc) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0);
|
|
|
|
opcode |= ((SC_VN(sc) << DMAE_COMMAND_E1HVN_SHIFT) |
|
|
(SC_VN(sc) << DMAE_COMMAND_DST_VN_SHIFT));
|
|
|
|
opcode |= (DMAE_COM_SET_ERR << DMAE_COMMAND_ERR_POLICY_SHIFT);
|
|
|
|
#ifdef __BIG_ENDIAN
|
|
opcode |= DMAE_CMD_ENDIANITY_B_DW_SWAP;
|
|
#else
|
|
opcode |= DMAE_CMD_ENDIANITY_DW_SWAP;
|
|
#endif
|
|
|
|
if (with_comp) {
|
|
opcode = bnx2x_dmae_opcode_add_comp(opcode, comp_type);
|
|
}
|
|
|
|
return opcode;
|
|
}
|
|
|
|
static void
|
|
bnx2x_prep_dmae_with_comp(struct bnx2x_softc *sc, struct dmae_command *dmae,
|
|
uint8_t src_type, uint8_t dst_type)
|
|
{
|
|
memset(dmae, 0, sizeof(struct dmae_command));
|
|
|
|
/* set the opcode */
|
|
dmae->opcode = bnx2x_dmae_opcode(sc, src_type, dst_type,
|
|
TRUE, DMAE_COMP_PCI);
|
|
|
|
/* fill in the completion parameters */
|
|
dmae->comp_addr_lo = U64_LO(BNX2X_SP_MAPPING(sc, wb_comp));
|
|
dmae->comp_addr_hi = U64_HI(BNX2X_SP_MAPPING(sc, wb_comp));
|
|
dmae->comp_val = DMAE_COMP_VAL;
|
|
}
|
|
|
|
/* issue a DMAE command over the init channel and wait for completion */
|
|
static int
|
|
bnx2x_issue_dmae_with_comp(struct bnx2x_softc *sc, struct dmae_command *dmae)
|
|
{
|
|
uint32_t *wb_comp = BNX2X_SP(sc, wb_comp);
|
|
int timeout = CHIP_REV_IS_SLOW(sc) ? 400000 : 4000;
|
|
|
|
/* reset completion */
|
|
*wb_comp = 0;
|
|
|
|
/* post the command on the channel used for initializations */
|
|
bnx2x_post_dmae(sc, dmae, INIT_DMAE_C(sc));
|
|
|
|
/* wait for completion */
|
|
DELAY(500);
|
|
|
|
while ((*wb_comp & ~DMAE_PCI_ERR_FLAG) != DMAE_COMP_VAL) {
|
|
if (!timeout ||
|
|
(sc->recovery_state != BNX2X_RECOVERY_DONE &&
|
|
sc->recovery_state != BNX2X_RECOVERY_NIC_LOADING)) {
|
|
PMD_DRV_LOG(INFO, sc, "DMAE timeout!");
|
|
return DMAE_TIMEOUT;
|
|
}
|
|
|
|
timeout--;
|
|
DELAY(50);
|
|
}
|
|
|
|
if (*wb_comp & DMAE_PCI_ERR_FLAG) {
|
|
PMD_DRV_LOG(INFO, sc, "DMAE PCI error!");
|
|
return DMAE_PCI_ERROR;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void bnx2x_read_dmae(struct bnx2x_softc *sc, uint32_t src_addr, uint32_t len32)
|
|
{
|
|
struct dmae_command dmae;
|
|
uint32_t *data;
|
|
uint32_t i;
|
|
int rc;
|
|
|
|
if (!sc->dmae_ready) {
|
|
data = BNX2X_SP(sc, wb_data[0]);
|
|
|
|
for (i = 0; i < len32; i++) {
|
|
data[i] = REG_RD(sc, (src_addr + (i * 4)));
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/* set opcode and fixed command fields */
|
|
bnx2x_prep_dmae_with_comp(sc, &dmae, DMAE_SRC_GRC, DMAE_DST_PCI);
|
|
|
|
/* fill in addresses and len */
|
|
dmae.src_addr_lo = (src_addr >> 2); /* GRC addr has dword resolution */
|
|
dmae.src_addr_hi = 0;
|
|
dmae.dst_addr_lo = U64_LO(BNX2X_SP_MAPPING(sc, wb_data));
|
|
dmae.dst_addr_hi = U64_HI(BNX2X_SP_MAPPING(sc, wb_data));
|
|
dmae.len = len32;
|
|
|
|
/* issue the command and wait for completion */
|
|
if ((rc = bnx2x_issue_dmae_with_comp(sc, &dmae)) != 0) {
|
|
rte_panic("DMAE failed (%d)", rc);
|
|
};
|
|
}
|
|
|
|
void
|
|
bnx2x_write_dmae(struct bnx2x_softc *sc, rte_iova_t dma_addr, uint32_t dst_addr,
|
|
uint32_t len32)
|
|
{
|
|
struct dmae_command dmae;
|
|
int rc;
|
|
|
|
if (!sc->dmae_ready) {
|
|
ecore_init_str_wr(sc, dst_addr, BNX2X_SP(sc, wb_data[0]), len32);
|
|
return;
|
|
}
|
|
|
|
/* set opcode and fixed command fields */
|
|
bnx2x_prep_dmae_with_comp(sc, &dmae, DMAE_SRC_PCI, DMAE_DST_GRC);
|
|
|
|
/* fill in addresses and len */
|
|
dmae.src_addr_lo = U64_LO(dma_addr);
|
|
dmae.src_addr_hi = U64_HI(dma_addr);
|
|
dmae.dst_addr_lo = (dst_addr >> 2); /* GRC addr has dword resolution */
|
|
dmae.dst_addr_hi = 0;
|
|
dmae.len = len32;
|
|
|
|
/* issue the command and wait for completion */
|
|
if ((rc = bnx2x_issue_dmae_with_comp(sc, &dmae)) != 0) {
|
|
rte_panic("DMAE failed (%d)", rc);
|
|
}
|
|
}
|
|
|
|
static void
|
|
bnx2x_write_dmae_phys_len(struct bnx2x_softc *sc, rte_iova_t phys_addr,
|
|
uint32_t addr, uint32_t len)
|
|
{
|
|
uint32_t dmae_wr_max = DMAE_LEN32_WR_MAX(sc);
|
|
uint32_t offset = 0;
|
|
|
|
while (len > dmae_wr_max) {
|
|
bnx2x_write_dmae(sc, (phys_addr + offset), /* src DMA address */
|
|
(addr + offset), /* dst GRC address */
|
|
dmae_wr_max);
|
|
offset += (dmae_wr_max * 4);
|
|
len -= dmae_wr_max;
|
|
}
|
|
|
|
bnx2x_write_dmae(sc, (phys_addr + offset), /* src DMA address */
|
|
(addr + offset), /* dst GRC address */
|
|
len);
|
|
}
|
|
|
|
void
|
|
bnx2x_set_ctx_validation(struct bnx2x_softc *sc, struct eth_context *cxt,
|
|
uint32_t cid)
|
|
{
|
|
/* ustorm cxt validation */
|
|
cxt->ustorm_ag_context.cdu_usage =
|
|
CDU_RSRVD_VALUE_TYPE_A(HW_CID(sc, cid),
|
|
CDU_REGION_NUMBER_UCM_AG,
|
|
ETH_CONNECTION_TYPE);
|
|
/* xcontext validation */
|
|
cxt->xstorm_ag_context.cdu_reserved =
|
|
CDU_RSRVD_VALUE_TYPE_A(HW_CID(sc, cid),
|
|
CDU_REGION_NUMBER_XCM_AG,
|
|
ETH_CONNECTION_TYPE);
|
|
}
|
|
|
|
static void
|
|
bnx2x_storm_memset_hc_timeout(struct bnx2x_softc *sc, uint8_t fw_sb_id,
|
|
uint8_t sb_index, uint8_t ticks)
|
|
{
|
|
uint32_t addr =
|
|
(BAR_CSTRORM_INTMEM +
|
|
CSTORM_STATUS_BLOCK_DATA_TIMEOUT_OFFSET(fw_sb_id, sb_index));
|
|
|
|
REG_WR8(sc, addr, ticks);
|
|
}
|
|
|
|
static void
|
|
bnx2x_storm_memset_hc_disable(struct bnx2x_softc *sc, uint16_t fw_sb_id,
|
|
uint8_t sb_index, uint8_t disable)
|
|
{
|
|
uint32_t enable_flag =
|
|
(disable) ? 0 : (1 << HC_INDEX_DATA_HC_ENABLED_SHIFT);
|
|
uint32_t addr =
|
|
(BAR_CSTRORM_INTMEM +
|
|
CSTORM_STATUS_BLOCK_DATA_FLAGS_OFFSET(fw_sb_id, sb_index));
|
|
uint8_t flags;
|
|
|
|
/* clear and set */
|
|
flags = REG_RD8(sc, addr);
|
|
flags &= ~HC_INDEX_DATA_HC_ENABLED;
|
|
flags |= enable_flag;
|
|
REG_WR8(sc, addr, flags);
|
|
}
|
|
|
|
void
|
|
bnx2x_update_coalesce_sb_index(struct bnx2x_softc *sc, uint8_t fw_sb_id,
|
|
uint8_t sb_index, uint8_t disable, uint16_t usec)
|
|
{
|
|
uint8_t ticks = (usec / 4);
|
|
|
|
bnx2x_storm_memset_hc_timeout(sc, fw_sb_id, sb_index, ticks);
|
|
|
|
disable = (disable) ? 1 : ((usec) ? 0 : 1);
|
|
bnx2x_storm_memset_hc_disable(sc, fw_sb_id, sb_index, disable);
|
|
}
|
|
|
|
uint32_t elink_cb_reg_read(struct bnx2x_softc *sc, uint32_t reg_addr)
|
|
{
|
|
return REG_RD(sc, reg_addr);
|
|
}
|
|
|
|
void elink_cb_reg_write(struct bnx2x_softc *sc, uint32_t reg_addr, uint32_t val)
|
|
{
|
|
REG_WR(sc, reg_addr, val);
|
|
}
|
|
|
|
void
|
|
elink_cb_event_log(__rte_unused struct bnx2x_softc *sc,
|
|
__rte_unused const elink_log_id_t elink_log_id, ...)
|
|
{
|
|
PMD_DRV_LOG(DEBUG, sc, "ELINK EVENT LOG (%d)", elink_log_id);
|
|
}
|
|
|
|
static int bnx2x_set_spio(struct bnx2x_softc *sc, int spio, uint32_t mode)
|
|
{
|
|
uint32_t spio_reg;
|
|
|
|
/* Only 2 SPIOs are configurable */
|
|
if ((spio != MISC_SPIO_SPIO4) && (spio != MISC_SPIO_SPIO5)) {
|
|
PMD_DRV_LOG(NOTICE, sc, "Invalid SPIO 0x%x", spio);
|
|
return -1;
|
|
}
|
|
|
|
bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_SPIO);
|
|
|
|
/* read SPIO and mask except the float bits */
|
|
spio_reg = (REG_RD(sc, MISC_REG_SPIO) & MISC_SPIO_FLOAT);
|
|
|
|
switch (mode) {
|
|
case MISC_SPIO_OUTPUT_LOW:
|
|
/* clear FLOAT and set CLR */
|
|
spio_reg &= ~(spio << MISC_SPIO_FLOAT_POS);
|
|
spio_reg |= (spio << MISC_SPIO_CLR_POS);
|
|
break;
|
|
|
|
case MISC_SPIO_OUTPUT_HIGH:
|
|
/* clear FLOAT and set SET */
|
|
spio_reg &= ~(spio << MISC_SPIO_FLOAT_POS);
|
|
spio_reg |= (spio << MISC_SPIO_SET_POS);
|
|
break;
|
|
|
|
case MISC_SPIO_INPUT_HI_Z:
|
|
/* set FLOAT */
|
|
spio_reg |= (spio << MISC_SPIO_FLOAT_POS);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
REG_WR(sc, MISC_REG_SPIO, spio_reg);
|
|
bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_SPIO);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_gpio_read(struct bnx2x_softc *sc, int gpio_num, uint8_t port)
|
|
{
|
|
/* The GPIO should be swapped if swap register is set and active */
|
|
int gpio_port = ((REG_RD(sc, NIG_REG_PORT_SWAP) &&
|
|
REG_RD(sc, NIG_REG_STRAP_OVERRIDE)) ^ port);
|
|
int gpio_shift = gpio_num;
|
|
if (gpio_port)
|
|
gpio_shift += MISC_REGISTERS_GPIO_PORT_SHIFT;
|
|
|
|
uint32_t gpio_mask = (1 << gpio_shift);
|
|
uint32_t gpio_reg;
|
|
|
|
if (gpio_num > MISC_REGISTERS_GPIO_3) {
|
|
PMD_DRV_LOG(NOTICE, sc, "Invalid GPIO %d", gpio_num);
|
|
return -1;
|
|
}
|
|
|
|
/* read GPIO value */
|
|
gpio_reg = REG_RD(sc, MISC_REG_GPIO);
|
|
|
|
/* get the requested pin value */
|
|
return ((gpio_reg & gpio_mask) == gpio_mask) ? 1 : 0;
|
|
}
|
|
|
|
static int
|
|
bnx2x_gpio_write(struct bnx2x_softc *sc, int gpio_num, uint32_t mode, uint8_t port)
|
|
{
|
|
/* The GPIO should be swapped if swap register is set and active */
|
|
int gpio_port = ((REG_RD(sc, NIG_REG_PORT_SWAP) &&
|
|
REG_RD(sc, NIG_REG_STRAP_OVERRIDE)) ^ port);
|
|
int gpio_shift = gpio_num;
|
|
if (gpio_port)
|
|
gpio_shift += MISC_REGISTERS_GPIO_PORT_SHIFT;
|
|
|
|
uint32_t gpio_mask = (1 << gpio_shift);
|
|
uint32_t gpio_reg;
|
|
|
|
if (gpio_num > MISC_REGISTERS_GPIO_3) {
|
|
PMD_DRV_LOG(NOTICE, sc, "Invalid GPIO %d", gpio_num);
|
|
return -1;
|
|
}
|
|
|
|
bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
|
|
|
|
/* read GPIO and mask except the float bits */
|
|
gpio_reg = (REG_RD(sc, MISC_REG_GPIO) & MISC_REGISTERS_GPIO_FLOAT);
|
|
|
|
switch (mode) {
|
|
case MISC_REGISTERS_GPIO_OUTPUT_LOW:
|
|
/* clear FLOAT and set CLR */
|
|
gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
|
|
gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_CLR_POS);
|
|
break;
|
|
|
|
case MISC_REGISTERS_GPIO_OUTPUT_HIGH:
|
|
/* clear FLOAT and set SET */
|
|
gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
|
|
gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_SET_POS);
|
|
break;
|
|
|
|
case MISC_REGISTERS_GPIO_INPUT_HI_Z:
|
|
/* set FLOAT */
|
|
gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
REG_WR(sc, MISC_REG_GPIO, gpio_reg);
|
|
bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
bnx2x_gpio_mult_write(struct bnx2x_softc *sc, uint8_t pins, uint32_t mode)
|
|
{
|
|
uint32_t gpio_reg;
|
|
|
|
/* any port swapping should be handled by caller */
|
|
|
|
bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
|
|
|
|
/* read GPIO and mask except the float bits */
|
|
gpio_reg = REG_RD(sc, MISC_REG_GPIO);
|
|
gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_FLOAT_POS);
|
|
gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_CLR_POS);
|
|
gpio_reg &= ~(pins << MISC_REGISTERS_GPIO_SET_POS);
|
|
|
|
switch (mode) {
|
|
case MISC_REGISTERS_GPIO_OUTPUT_LOW:
|
|
/* set CLR */
|
|
gpio_reg |= (pins << MISC_REGISTERS_GPIO_CLR_POS);
|
|
break;
|
|
|
|
case MISC_REGISTERS_GPIO_OUTPUT_HIGH:
|
|
/* set SET */
|
|
gpio_reg |= (pins << MISC_REGISTERS_GPIO_SET_POS);
|
|
break;
|
|
|
|
case MISC_REGISTERS_GPIO_INPUT_HI_Z:
|
|
/* set FLOAT */
|
|
gpio_reg |= (pins << MISC_REGISTERS_GPIO_FLOAT_POS);
|
|
break;
|
|
|
|
default:
|
|
PMD_DRV_LOG(NOTICE, sc,
|
|
"Invalid GPIO mode assignment %d", mode);
|
|
bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
|
|
return -1;
|
|
}
|
|
|
|
REG_WR(sc, MISC_REG_GPIO, gpio_reg);
|
|
bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
bnx2x_gpio_int_write(struct bnx2x_softc *sc, int gpio_num, uint32_t mode,
|
|
uint8_t port)
|
|
{
|
|
/* The GPIO should be swapped if swap register is set and active */
|
|
int gpio_port = ((REG_RD(sc, NIG_REG_PORT_SWAP) &&
|
|
REG_RD(sc, NIG_REG_STRAP_OVERRIDE)) ^ port);
|
|
int gpio_shift = gpio_num;
|
|
if (gpio_port)
|
|
gpio_shift += MISC_REGISTERS_GPIO_PORT_SHIFT;
|
|
|
|
uint32_t gpio_mask = (1 << gpio_shift);
|
|
uint32_t gpio_reg;
|
|
|
|
if (gpio_num > MISC_REGISTERS_GPIO_3) {
|
|
PMD_DRV_LOG(NOTICE, sc, "Invalid GPIO %d", gpio_num);
|
|
return -1;
|
|
}
|
|
|
|
bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
|
|
|
|
/* read GPIO int */
|
|
gpio_reg = REG_RD(sc, MISC_REG_GPIO_INT);
|
|
|
|
switch (mode) {
|
|
case MISC_REGISTERS_GPIO_INT_OUTPUT_CLR:
|
|
/* clear SET and set CLR */
|
|
gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS);
|
|
gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS);
|
|
break;
|
|
|
|
case MISC_REGISTERS_GPIO_INT_OUTPUT_SET:
|
|
/* clear CLR and set SET */
|
|
gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_INT_CLR_POS);
|
|
gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_INT_SET_POS);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
REG_WR(sc, MISC_REG_GPIO_INT, gpio_reg);
|
|
bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_GPIO);
|
|
|
|
return 0;
|
|
}
|
|
|
|
uint32_t
|
|
elink_cb_gpio_read(struct bnx2x_softc * sc, uint16_t gpio_num, uint8_t port)
|
|
{
|
|
return bnx2x_gpio_read(sc, gpio_num, port);
|
|
}
|
|
|
|
uint8_t elink_cb_gpio_write(struct bnx2x_softc * sc, uint16_t gpio_num, uint8_t mode, /* 0=low 1=high */
|
|
uint8_t port)
|
|
{
|
|
return bnx2x_gpio_write(sc, gpio_num, mode, port);
|
|
}
|
|
|
|
uint8_t
|
|
elink_cb_gpio_mult_write(struct bnx2x_softc * sc, uint8_t pins,
|
|
uint8_t mode /* 0=low 1=high */ )
|
|
{
|
|
return bnx2x_gpio_mult_write(sc, pins, mode);
|
|
}
|
|
|
|
uint8_t elink_cb_gpio_int_write(struct bnx2x_softc * sc, uint16_t gpio_num, uint8_t mode, /* 0=low 1=high */
|
|
uint8_t port)
|
|
{
|
|
return bnx2x_gpio_int_write(sc, gpio_num, mode, port);
|
|
}
|
|
|
|
void elink_cb_notify_link_changed(struct bnx2x_softc *sc)
|
|
{
|
|
REG_WR(sc, (MISC_REG_AEU_GENERAL_ATTN_12 +
|
|
(SC_FUNC(sc) * sizeof(uint32_t))), 1);
|
|
}
|
|
|
|
/* send the MCP a request, block until there is a reply */
|
|
uint32_t
|
|
elink_cb_fw_command(struct bnx2x_softc *sc, uint32_t command, uint32_t param)
|
|
{
|
|
int mb_idx = SC_FW_MB_IDX(sc);
|
|
uint32_t seq;
|
|
uint32_t rc = 0;
|
|
uint32_t cnt = 1;
|
|
uint8_t delay = CHIP_REV_IS_SLOW(sc) ? 100 : 10;
|
|
|
|
seq = ++sc->fw_seq;
|
|
SHMEM_WR(sc, func_mb[mb_idx].drv_mb_param, param);
|
|
SHMEM_WR(sc, func_mb[mb_idx].drv_mb_header, (command | seq));
|
|
|
|
PMD_DRV_LOG(DEBUG, sc,
|
|
"wrote command 0x%08x to FW MB param 0x%08x",
|
|
(command | seq), param);
|
|
|
|
/* Let the FW do it's magic. GIve it up to 5 seconds... */
|
|
do {
|
|
DELAY(delay * 1000);
|
|
rc = SHMEM_RD(sc, func_mb[mb_idx].fw_mb_header);
|
|
} while ((seq != (rc & FW_MSG_SEQ_NUMBER_MASK)) && (cnt++ < 500));
|
|
|
|
/* is this a reply to our command? */
|
|
if (seq == (rc & FW_MSG_SEQ_NUMBER_MASK)) {
|
|
rc &= FW_MSG_CODE_MASK;
|
|
} else {
|
|
/* Ruh-roh! */
|
|
PMD_DRV_LOG(NOTICE, sc, "FW failed to respond!");
|
|
rc = 0;
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static uint32_t
|
|
bnx2x_fw_command(struct bnx2x_softc *sc, uint32_t command, uint32_t param)
|
|
{
|
|
return elink_cb_fw_command(sc, command, param);
|
|
}
|
|
|
|
static void
|
|
__storm_memset_dma_mapping(struct bnx2x_softc *sc, uint32_t addr,
|
|
rte_iova_t mapping)
|
|
{
|
|
REG_WR(sc, addr, U64_LO(mapping));
|
|
REG_WR(sc, (addr + 4), U64_HI(mapping));
|
|
}
|
|
|
|
static void
|
|
storm_memset_spq_addr(struct bnx2x_softc *sc, rte_iova_t mapping,
|
|
uint16_t abs_fid)
|
|
{
|
|
uint32_t addr = (XSEM_REG_FAST_MEMORY +
|
|
XSTORM_SPQ_PAGE_BASE_OFFSET(abs_fid));
|
|
__storm_memset_dma_mapping(sc, addr, mapping);
|
|
}
|
|
|
|
static void
|
|
storm_memset_vf_to_pf(struct bnx2x_softc *sc, uint16_t abs_fid, uint16_t pf_id)
|
|
{
|
|
REG_WR8(sc, (BAR_XSTRORM_INTMEM + XSTORM_VF_TO_PF_OFFSET(abs_fid)),
|
|
pf_id);
|
|
REG_WR8(sc, (BAR_CSTRORM_INTMEM + CSTORM_VF_TO_PF_OFFSET(abs_fid)),
|
|
pf_id);
|
|
REG_WR8(sc, (BAR_TSTRORM_INTMEM + TSTORM_VF_TO_PF_OFFSET(abs_fid)),
|
|
pf_id);
|
|
REG_WR8(sc, (BAR_USTRORM_INTMEM + USTORM_VF_TO_PF_OFFSET(abs_fid)),
|
|
pf_id);
|
|
}
|
|
|
|
static void
|
|
storm_memset_func_en(struct bnx2x_softc *sc, uint16_t abs_fid, uint8_t enable)
|
|
{
|
|
REG_WR8(sc, (BAR_XSTRORM_INTMEM + XSTORM_FUNC_EN_OFFSET(abs_fid)),
|
|
enable);
|
|
REG_WR8(sc, (BAR_CSTRORM_INTMEM + CSTORM_FUNC_EN_OFFSET(abs_fid)),
|
|
enable);
|
|
REG_WR8(sc, (BAR_TSTRORM_INTMEM + TSTORM_FUNC_EN_OFFSET(abs_fid)),
|
|
enable);
|
|
REG_WR8(sc, (BAR_USTRORM_INTMEM + USTORM_FUNC_EN_OFFSET(abs_fid)),
|
|
enable);
|
|
}
|
|
|
|
static void
|
|
storm_memset_eq_data(struct bnx2x_softc *sc, struct event_ring_data *eq_data,
|
|
uint16_t pfid)
|
|
{
|
|
uint32_t addr;
|
|
size_t size;
|
|
|
|
addr = (BAR_CSTRORM_INTMEM + CSTORM_EVENT_RING_DATA_OFFSET(pfid));
|
|
size = sizeof(struct event_ring_data);
|
|
ecore_storm_memset_struct(sc, addr, size, (uint32_t *) eq_data);
|
|
}
|
|
|
|
static void
|
|
storm_memset_eq_prod(struct bnx2x_softc *sc, uint16_t eq_prod, uint16_t pfid)
|
|
{
|
|
uint32_t addr = (BAR_CSTRORM_INTMEM +
|
|
CSTORM_EVENT_RING_PROD_OFFSET(pfid));
|
|
REG_WR16(sc, addr, eq_prod);
|
|
}
|
|
|
|
/*
|
|
* Post a slowpath command.
|
|
*
|
|
* A slowpath command is used to propagate a configuration change through
|
|
* the controller in a controlled manner, allowing each STORM processor and
|
|
* other H/W blocks to phase in the change. The commands sent on the
|
|
* slowpath are referred to as ramrods. Depending on the ramrod used the
|
|
* completion of the ramrod will occur in different ways. Here's a
|
|
* breakdown of ramrods and how they complete:
|
|
*
|
|
* RAMROD_CMD_ID_ETH_PORT_SETUP
|
|
* Used to setup the leading connection on a port. Completes on the
|
|
* Receive Completion Queue (RCQ) of that port (typically fp[0]).
|
|
*
|
|
* RAMROD_CMD_ID_ETH_CLIENT_SETUP
|
|
* Used to setup an additional connection on a port. Completes on the
|
|
* RCQ of the multi-queue/RSS connection being initialized.
|
|
*
|
|
* RAMROD_CMD_ID_ETH_STAT_QUERY
|
|
* Used to force the storm processors to update the statistics database
|
|
* in host memory. This ramrod is send on the leading connection CID and
|
|
* completes as an index increment of the CSTORM on the default status
|
|
* block.
|
|
*
|
|
* RAMROD_CMD_ID_ETH_UPDATE
|
|
* Used to update the state of the leading connection, usually to udpate
|
|
* the RSS indirection table. Completes on the RCQ of the leading
|
|
* connection. (Not currently used under FreeBSD until OS support becomes
|
|
* available.)
|
|
*
|
|
* RAMROD_CMD_ID_ETH_HALT
|
|
* Used when tearing down a connection prior to driver unload. Completes
|
|
* on the RCQ of the multi-queue/RSS connection being torn down. Don't
|
|
* use this on the leading connection.
|
|
*
|
|
* RAMROD_CMD_ID_ETH_SET_MAC
|
|
* Sets the Unicast/Broadcast/Multicast used by the port. Completes on
|
|
* the RCQ of the leading connection.
|
|
*
|
|
* RAMROD_CMD_ID_ETH_CFC_DEL
|
|
* Used when tearing down a conneciton prior to driver unload. Completes
|
|
* on the RCQ of the leading connection (since the current connection
|
|
* has been completely removed from controller memory).
|
|
*
|
|
* RAMROD_CMD_ID_ETH_PORT_DEL
|
|
* Used to tear down the leading connection prior to driver unload,
|
|
* typically fp[0]. Completes as an index increment of the CSTORM on the
|
|
* default status block.
|
|
*
|
|
* RAMROD_CMD_ID_ETH_FORWARD_SETUP
|
|
* Used for connection offload. Completes on the RCQ of the multi-queue
|
|
* RSS connection that is being offloaded. (Not currently used under
|
|
* FreeBSD.)
|
|
*
|
|
* There can only be one command pending per function.
|
|
*
|
|
* Returns:
|
|
* 0 = Success, !0 = Failure.
|
|
*/
|
|
|
|
/* must be called under the spq lock */
|
|
static inline struct eth_spe *bnx2x_sp_get_next(struct bnx2x_softc *sc)
|
|
{
|
|
struct eth_spe *next_spe = sc->spq_prod_bd;
|
|
|
|
if (sc->spq_prod_bd == sc->spq_last_bd) {
|
|
/* wrap back to the first eth_spq */
|
|
sc->spq_prod_bd = sc->spq;
|
|
sc->spq_prod_idx = 0;
|
|
} else {
|
|
sc->spq_prod_bd++;
|
|
sc->spq_prod_idx++;
|
|
}
|
|
|
|
return next_spe;
|
|
}
|
|
|
|
/* must be called under the spq lock */
|
|
static void bnx2x_sp_prod_update(struct bnx2x_softc *sc)
|
|
{
|
|
int func = SC_FUNC(sc);
|
|
|
|
/*
|
|
* Make sure that BD data is updated before writing the producer.
|
|
* BD data is written to the memory, the producer is read from the
|
|
* memory, thus we need a full memory barrier to ensure the ordering.
|
|
*/
|
|
mb();
|
|
|
|
REG_WR16(sc, (BAR_XSTRORM_INTMEM + XSTORM_SPQ_PROD_OFFSET(func)),
|
|
sc->spq_prod_idx);
|
|
|
|
mb();
|
|
}
|
|
|
|
/**
|
|
* bnx2x_is_contextless_ramrod - check if the current command ends on EQ
|
|
*
|
|
* @cmd: command to check
|
|
* @cmd_type: command type
|
|
*/
|
|
static int bnx2x_is_contextless_ramrod(int cmd, int cmd_type)
|
|
{
|
|
if ((cmd_type == NONE_CONNECTION_TYPE) ||
|
|
(cmd == RAMROD_CMD_ID_ETH_FORWARD_SETUP) ||
|
|
(cmd == RAMROD_CMD_ID_ETH_CLASSIFICATION_RULES) ||
|
|
(cmd == RAMROD_CMD_ID_ETH_FILTER_RULES) ||
|
|
(cmd == RAMROD_CMD_ID_ETH_MULTICAST_RULES) ||
|
|
(cmd == RAMROD_CMD_ID_ETH_SET_MAC) ||
|
|
(cmd == RAMROD_CMD_ID_ETH_RSS_UPDATE)) {
|
|
return TRUE;
|
|
} else {
|
|
return FALSE;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* bnx2x_sp_post - place a single command on an SP ring
|
|
*
|
|
* @sc: driver handle
|
|
* @command: command to place (e.g. SETUP, FILTER_RULES, etc.)
|
|
* @cid: SW CID the command is related to
|
|
* @data_hi: command private data address (high 32 bits)
|
|
* @data_lo: command private data address (low 32 bits)
|
|
* @cmd_type: command type (e.g. NONE, ETH)
|
|
*
|
|
* SP data is handled as if it's always an address pair, thus data fields are
|
|
* not swapped to little endian in upper functions. Instead this function swaps
|
|
* data as if it's two uint32 fields.
|
|
*/
|
|
int
|
|
bnx2x_sp_post(struct bnx2x_softc *sc, int command, int cid, uint32_t data_hi,
|
|
uint32_t data_lo, int cmd_type)
|
|
{
|
|
struct eth_spe *spe;
|
|
uint16_t type;
|
|
int common;
|
|
|
|
common = bnx2x_is_contextless_ramrod(command, cmd_type);
|
|
|
|
if (common) {
|
|
if (!atomic_load_acq_long(&sc->eq_spq_left)) {
|
|
PMD_DRV_LOG(INFO, sc, "EQ ring is full!");
|
|
return -1;
|
|
}
|
|
} else {
|
|
if (!atomic_load_acq_long(&sc->cq_spq_left)) {
|
|
PMD_DRV_LOG(INFO, sc, "SPQ ring is full!");
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
spe = bnx2x_sp_get_next(sc);
|
|
|
|
/* CID needs port number to be encoded int it */
|
|
spe->hdr.conn_and_cmd_data =
|
|
htole32((command << SPE_HDR_CMD_ID_SHIFT) | HW_CID(sc, cid));
|
|
|
|
type = (cmd_type << SPE_HDR_CONN_TYPE_SHIFT) & SPE_HDR_CONN_TYPE;
|
|
|
|
/* TBD: Check if it works for VFs */
|
|
type |= ((SC_FUNC(sc) << SPE_HDR_FUNCTION_ID_SHIFT) &
|
|
SPE_HDR_FUNCTION_ID);
|
|
|
|
spe->hdr.type = htole16(type);
|
|
|
|
spe->data.update_data_addr.hi = htole32(data_hi);
|
|
spe->data.update_data_addr.lo = htole32(data_lo);
|
|
|
|
/*
|
|
* It's ok if the actual decrement is issued towards the memory
|
|
* somewhere between the lock and unlock. Thus no more explict
|
|
* memory barrier is needed.
|
|
*/
|
|
if (common) {
|
|
atomic_subtract_acq_long(&sc->eq_spq_left, 1);
|
|
} else {
|
|
atomic_subtract_acq_long(&sc->cq_spq_left, 1);
|
|
}
|
|
|
|
PMD_DRV_LOG(DEBUG, sc,
|
|
"SPQE[%x] (%x:%x) (cmd, common?) (%d,%d) hw_cid %x"
|
|
"data (%x:%x) type(0x%x) left (CQ, EQ) (%lx,%lx)",
|
|
sc->spq_prod_idx,
|
|
(uint32_t) U64_HI(sc->spq_dma.paddr),
|
|
(uint32_t) (U64_LO(sc->spq_dma.paddr) +
|
|
(uint8_t *) sc->spq_prod_bd -
|
|
(uint8_t *) sc->spq), command, common,
|
|
HW_CID(sc, cid), data_hi, data_lo, type,
|
|
atomic_load_acq_long(&sc->cq_spq_left),
|
|
atomic_load_acq_long(&sc->eq_spq_left));
|
|
|
|
/* RAMROD completion is processed in bnx2x_intr_legacy()
|
|
* which can run from different contexts.
|
|
* Ask bnx2x_intr_intr() to process RAMROD
|
|
* completion whenever it gets scheduled.
|
|
*/
|
|
rte_atomic32_set(&sc->scan_fp, 1);
|
|
bnx2x_sp_prod_update(sc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bnx2x_drv_pulse(struct bnx2x_softc *sc)
|
|
{
|
|
SHMEM_WR(sc, func_mb[SC_FW_MB_IDX(sc)].drv_pulse_mb,
|
|
sc->fw_drv_pulse_wr_seq);
|
|
}
|
|
|
|
static int bnx2x_tx_queue_has_work(const struct bnx2x_fastpath *fp)
|
|
{
|
|
uint16_t hw_cons;
|
|
struct bnx2x_tx_queue *txq = fp->sc->tx_queues[fp->index];
|
|
|
|
if (unlikely(!txq)) {
|
|
PMD_TX_LOG(ERR, "ERROR: TX queue is NULL");
|
|
return 0;
|
|
}
|
|
|
|
mb(); /* status block fields can change */
|
|
hw_cons = le16toh(*fp->tx_cons_sb);
|
|
return hw_cons != txq->tx_pkt_head;
|
|
}
|
|
|
|
static uint8_t bnx2x_has_tx_work(struct bnx2x_fastpath *fp)
|
|
{
|
|
/* expand this for multi-cos if ever supported */
|
|
return bnx2x_tx_queue_has_work(fp);
|
|
}
|
|
|
|
static int bnx2x_has_rx_work(struct bnx2x_fastpath *fp)
|
|
{
|
|
uint16_t rx_cq_cons_sb;
|
|
struct bnx2x_rx_queue *rxq;
|
|
rxq = fp->sc->rx_queues[fp->index];
|
|
if (unlikely(!rxq)) {
|
|
PMD_RX_LOG(ERR, "ERROR: RX queue is NULL");
|
|
return 0;
|
|
}
|
|
|
|
mb(); /* status block fields can change */
|
|
rx_cq_cons_sb = le16toh(*fp->rx_cq_cons_sb);
|
|
if (unlikely((rx_cq_cons_sb & MAX_RCQ_ENTRIES(rxq)) ==
|
|
MAX_RCQ_ENTRIES(rxq)))
|
|
rx_cq_cons_sb++;
|
|
|
|
PMD_RX_LOG(DEBUG, "hw CQ cons = %d, sw CQ cons = %d",
|
|
rx_cq_cons_sb, rxq->rx_cq_head);
|
|
|
|
return rxq->rx_cq_head != rx_cq_cons_sb;
|
|
}
|
|
|
|
static void
|
|
bnx2x_sp_event(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
|
|
union eth_rx_cqe *rr_cqe)
|
|
{
|
|
int cid = SW_CID(rr_cqe->ramrod_cqe.conn_and_cmd_data);
|
|
int command = CQE_CMD(rr_cqe->ramrod_cqe.conn_and_cmd_data);
|
|
enum ecore_queue_cmd drv_cmd = ECORE_Q_CMD_MAX;
|
|
struct ecore_queue_sp_obj *q_obj = &BNX2X_SP_OBJ(sc, fp).q_obj;
|
|
|
|
PMD_DRV_LOG(DEBUG, sc,
|
|
"fp=%d cid=%d got ramrod #%d state is %x type is %d",
|
|
fp->index, cid, command, sc->state,
|
|
rr_cqe->ramrod_cqe.ramrod_type);
|
|
|
|
switch (command) {
|
|
case (RAMROD_CMD_ID_ETH_CLIENT_UPDATE):
|
|
PMD_DRV_LOG(DEBUG, sc, "got UPDATE ramrod. CID %d", cid);
|
|
drv_cmd = ECORE_Q_CMD_UPDATE;
|
|
break;
|
|
|
|
case (RAMROD_CMD_ID_ETH_CLIENT_SETUP):
|
|
PMD_DRV_LOG(DEBUG, sc, "got MULTI[%d] setup ramrod", cid);
|
|
drv_cmd = ECORE_Q_CMD_SETUP;
|
|
break;
|
|
|
|
case (RAMROD_CMD_ID_ETH_TX_QUEUE_SETUP):
|
|
PMD_DRV_LOG(DEBUG, sc,
|
|
"got MULTI[%d] tx-only setup ramrod", cid);
|
|
drv_cmd = ECORE_Q_CMD_SETUP_TX_ONLY;
|
|
break;
|
|
|
|
case (RAMROD_CMD_ID_ETH_HALT):
|
|
PMD_DRV_LOG(DEBUG, sc, "got MULTI[%d] halt ramrod", cid);
|
|
drv_cmd = ECORE_Q_CMD_HALT;
|
|
break;
|
|
|
|
case (RAMROD_CMD_ID_ETH_TERMINATE):
|
|
PMD_DRV_LOG(DEBUG, sc, "got MULTI[%d] teminate ramrod", cid);
|
|
drv_cmd = ECORE_Q_CMD_TERMINATE;
|
|
break;
|
|
|
|
case (RAMROD_CMD_ID_ETH_EMPTY):
|
|
PMD_DRV_LOG(DEBUG, sc, "got MULTI[%d] empty ramrod", cid);
|
|
drv_cmd = ECORE_Q_CMD_EMPTY;
|
|
break;
|
|
|
|
default:
|
|
PMD_DRV_LOG(DEBUG, sc,
|
|
"ERROR: unexpected MC reply (%d)"
|
|
"on fp[%d]", command, fp->index);
|
|
return;
|
|
}
|
|
|
|
if ((drv_cmd != ECORE_Q_CMD_MAX) &&
|
|
q_obj->complete_cmd(sc, q_obj, drv_cmd)) {
|
|
/*
|
|
* q_obj->complete_cmd() failure means that this was
|
|
* an unexpected completion.
|
|
*
|
|
* In this case we don't want to increase the sc->spq_left
|
|
* because apparently we haven't sent this command the first
|
|
* place.
|
|
*/
|
|
// rte_panic("Unexpected SP completion");
|
|
return;
|
|
}
|
|
|
|
atomic_add_acq_long(&sc->cq_spq_left, 1);
|
|
|
|
PMD_DRV_LOG(DEBUG, sc, "sc->cq_spq_left 0x%lx",
|
|
atomic_load_acq_long(&sc->cq_spq_left));
|
|
}
|
|
|
|
static uint8_t bnx2x_rxeof(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp)
|
|
{
|
|
struct bnx2x_rx_queue *rxq;
|
|
uint16_t bd_cons, bd_prod, bd_prod_fw, comp_ring_cons;
|
|
uint16_t hw_cq_cons, sw_cq_cons, sw_cq_prod;
|
|
|
|
rte_spinlock_lock(&(fp)->rx_mtx);
|
|
|
|
rxq = sc->rx_queues[fp->index];
|
|
if (!rxq) {
|
|
PMD_RX_LOG(ERR, "RX queue %d is NULL", fp->index);
|
|
rte_spinlock_unlock(&(fp)->rx_mtx);
|
|
return 0;
|
|
}
|
|
|
|
/* CQ "next element" is of the size of the regular element */
|
|
hw_cq_cons = le16toh(*fp->rx_cq_cons_sb);
|
|
if (unlikely((hw_cq_cons & USABLE_RCQ_ENTRIES_PER_PAGE) ==
|
|
USABLE_RCQ_ENTRIES_PER_PAGE)) {
|
|
hw_cq_cons++;
|
|
}
|
|
|
|
bd_cons = rxq->rx_bd_head;
|
|
bd_prod = rxq->rx_bd_tail;
|
|
bd_prod_fw = bd_prod;
|
|
sw_cq_cons = rxq->rx_cq_head;
|
|
sw_cq_prod = rxq->rx_cq_tail;
|
|
|
|
/*
|
|
* Memory barrier necessary as speculative reads of the rx
|
|
* buffer can be ahead of the index in the status block
|
|
*/
|
|
rmb();
|
|
|
|
while (sw_cq_cons != hw_cq_cons) {
|
|
union eth_rx_cqe *cqe;
|
|
struct eth_fast_path_rx_cqe *cqe_fp;
|
|
uint8_t cqe_fp_flags;
|
|
enum eth_rx_cqe_type cqe_fp_type;
|
|
|
|
comp_ring_cons = RCQ_ENTRY(sw_cq_cons, rxq);
|
|
bd_prod = RX_BD(bd_prod, rxq);
|
|
bd_cons = RX_BD(bd_cons, rxq);
|
|
|
|
cqe = &rxq->cq_ring[comp_ring_cons];
|
|
cqe_fp = &cqe->fast_path_cqe;
|
|
cqe_fp_flags = cqe_fp->type_error_flags;
|
|
cqe_fp_type = cqe_fp_flags & ETH_FAST_PATH_RX_CQE_TYPE;
|
|
|
|
/* is this a slowpath msg? */
|
|
if (CQE_TYPE_SLOW(cqe_fp_type)) {
|
|
bnx2x_sp_event(sc, fp, cqe);
|
|
goto next_cqe;
|
|
}
|
|
|
|
/* is this an error packet? */
|
|
if (unlikely(cqe_fp_flags &
|
|
ETH_FAST_PATH_RX_CQE_PHY_DECODE_ERR_FLG)) {
|
|
PMD_RX_LOG(DEBUG, "flags 0x%x rx packet %u",
|
|
cqe_fp_flags, sw_cq_cons);
|
|
goto next_rx;
|
|
}
|
|
|
|
PMD_RX_LOG(DEBUG, "Dropping fastpath called from attn poller!");
|
|
|
|
next_rx:
|
|
bd_cons = NEXT_RX_BD(bd_cons);
|
|
bd_prod = NEXT_RX_BD(bd_prod);
|
|
bd_prod_fw = NEXT_RX_BD(bd_prod_fw);
|
|
|
|
next_cqe:
|
|
sw_cq_prod = NEXT_RCQ_IDX(sw_cq_prod);
|
|
sw_cq_cons = NEXT_RCQ_IDX(sw_cq_cons);
|
|
|
|
} /* while work to do */
|
|
|
|
rxq->rx_bd_head = bd_cons;
|
|
rxq->rx_bd_tail = bd_prod_fw;
|
|
rxq->rx_cq_head = sw_cq_cons;
|
|
rxq->rx_cq_tail = sw_cq_prod;
|
|
|
|
PMD_RX_LOG(DEBUG, "BD prod = %d, sw CQ prod = %d",
|
|
bd_prod_fw, sw_cq_prod);
|
|
|
|
/* Update producers */
|
|
bnx2x_update_rx_prod(sc, fp, bd_prod_fw, sw_cq_prod);
|
|
|
|
rte_spinlock_unlock(&(fp)->rx_mtx);
|
|
|
|
return sw_cq_cons != hw_cq_cons;
|
|
}
|
|
|
|
static uint16_t
|
|
bnx2x_free_tx_pkt(__rte_unused struct bnx2x_fastpath *fp, struct bnx2x_tx_queue *txq,
|
|
uint16_t pkt_idx, uint16_t bd_idx)
|
|
{
|
|
struct eth_tx_start_bd *tx_start_bd =
|
|
&txq->tx_ring[TX_BD(bd_idx, txq)].start_bd;
|
|
uint16_t nbd = rte_le_to_cpu_16(tx_start_bd->nbd);
|
|
struct rte_mbuf *tx_mbuf = txq->sw_ring[TX_BD(pkt_idx, txq)];
|
|
|
|
if (likely(tx_mbuf != NULL)) {
|
|
rte_pktmbuf_free_seg(tx_mbuf);
|
|
} else {
|
|
PMD_RX_LOG(ERR, "fp[%02d] lost mbuf %lu",
|
|
fp->index, (unsigned long)TX_BD(pkt_idx, txq));
|
|
}
|
|
|
|
txq->sw_ring[TX_BD(pkt_idx, txq)] = NULL;
|
|
txq->nb_tx_avail += nbd;
|
|
|
|
while (nbd--)
|
|
bd_idx = NEXT_TX_BD(bd_idx);
|
|
|
|
return bd_idx;
|
|
}
|
|
|
|
/* processes transmit completions */
|
|
uint8_t bnx2x_txeof(__rte_unused struct bnx2x_softc * sc, struct bnx2x_fastpath * fp)
|
|
{
|
|
uint16_t bd_cons, hw_cons, sw_cons;
|
|
__rte_unused uint16_t tx_bd_avail;
|
|
|
|
struct bnx2x_tx_queue *txq = fp->sc->tx_queues[fp->index];
|
|
|
|
if (unlikely(!txq)) {
|
|
PMD_TX_LOG(ERR, "ERROR: TX queue is NULL");
|
|
return 0;
|
|
}
|
|
|
|
bd_cons = txq->tx_bd_head;
|
|
hw_cons = rte_le_to_cpu_16(*fp->tx_cons_sb);
|
|
sw_cons = txq->tx_pkt_head;
|
|
|
|
while (sw_cons != hw_cons) {
|
|
bd_cons = bnx2x_free_tx_pkt(fp, txq, sw_cons, bd_cons);
|
|
sw_cons++;
|
|
}
|
|
|
|
txq->tx_pkt_head = sw_cons;
|
|
txq->tx_bd_head = bd_cons;
|
|
|
|
tx_bd_avail = txq->nb_tx_avail;
|
|
|
|
PMD_TX_LOG(DEBUG, "fp[%02d] avail=%u cons_sb=%u, "
|
|
"pkt_head=%u pkt_tail=%u bd_head=%u bd_tail=%u",
|
|
fp->index, tx_bd_avail, hw_cons,
|
|
txq->tx_pkt_head, txq->tx_pkt_tail,
|
|
txq->tx_bd_head, txq->tx_bd_tail);
|
|
return TRUE;
|
|
}
|
|
|
|
static void bnx2x_drain_tx_queues(struct bnx2x_softc *sc)
|
|
{
|
|
struct bnx2x_fastpath *fp;
|
|
int i, count;
|
|
|
|
/* wait until all TX fastpath tasks have completed */
|
|
for (i = 0; i < sc->num_queues; i++) {
|
|
fp = &sc->fp[i];
|
|
|
|
count = 1000;
|
|
|
|
while (bnx2x_has_tx_work(fp)) {
|
|
bnx2x_txeof(sc, fp);
|
|
|
|
if (count == 0) {
|
|
PMD_TX_LOG(ERR,
|
|
"Timeout waiting for fp[%d] "
|
|
"transmits to complete!", i);
|
|
rte_panic("tx drain failure");
|
|
return;
|
|
}
|
|
|
|
count--;
|
|
DELAY(1000);
|
|
rmb();
|
|
}
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static int
|
|
bnx2x_del_all_macs(struct bnx2x_softc *sc, struct ecore_vlan_mac_obj *mac_obj,
|
|
int mac_type, uint8_t wait_for_comp)
|
|
{
|
|
unsigned long ramrod_flags = 0, vlan_mac_flags = 0;
|
|
int rc;
|
|
|
|
/* wait for completion of requested */
|
|
if (wait_for_comp) {
|
|
bnx2x_set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
|
|
}
|
|
|
|
/* Set the mac type of addresses we want to clear */
|
|
bnx2x_set_bit(mac_type, &vlan_mac_flags);
|
|
|
|
rc = mac_obj->delete_all(sc, mac_obj, &vlan_mac_flags, &ramrod_flags);
|
|
if (rc < 0)
|
|
PMD_DRV_LOG(ERR, sc, "Failed to delete MACs (%d)", rc);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int
|
|
bnx2x_fill_accept_flags(struct bnx2x_softc *sc, uint32_t rx_mode,
|
|
unsigned long *rx_accept_flags,
|
|
unsigned long *tx_accept_flags)
|
|
{
|
|
/* Clear the flags first */
|
|
*rx_accept_flags = 0;
|
|
*tx_accept_flags = 0;
|
|
|
|
switch (rx_mode) {
|
|
case BNX2X_RX_MODE_NONE:
|
|
/*
|
|
* 'drop all' supersedes any accept flags that may have been
|
|
* passed to the function.
|
|
*/
|
|
break;
|
|
|
|
case BNX2X_RX_MODE_NORMAL:
|
|
bnx2x_set_bit(ECORE_ACCEPT_UNICAST, rx_accept_flags);
|
|
bnx2x_set_bit(ECORE_ACCEPT_MULTICAST, rx_accept_flags);
|
|
bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, rx_accept_flags);
|
|
|
|
/* internal switching mode */
|
|
bnx2x_set_bit(ECORE_ACCEPT_UNICAST, tx_accept_flags);
|
|
bnx2x_set_bit(ECORE_ACCEPT_MULTICAST, tx_accept_flags);
|
|
bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, tx_accept_flags);
|
|
|
|
break;
|
|
|
|
case BNX2X_RX_MODE_ALLMULTI:
|
|
bnx2x_set_bit(ECORE_ACCEPT_UNICAST, rx_accept_flags);
|
|
bnx2x_set_bit(ECORE_ACCEPT_ALL_MULTICAST, rx_accept_flags);
|
|
bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, rx_accept_flags);
|
|
|
|
/* internal switching mode */
|
|
bnx2x_set_bit(ECORE_ACCEPT_UNICAST, tx_accept_flags);
|
|
bnx2x_set_bit(ECORE_ACCEPT_ALL_MULTICAST, tx_accept_flags);
|
|
bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, tx_accept_flags);
|
|
|
|
break;
|
|
|
|
case BNX2X_RX_MODE_ALLMULTI_PROMISC:
|
|
case BNX2X_RX_MODE_PROMISC:
|
|
/*
|
|
* According to deffinition of SI mode, iface in promisc mode
|
|
* should receive matched and unmatched (in resolution of port)
|
|
* unicast packets.
|
|
*/
|
|
bnx2x_set_bit(ECORE_ACCEPT_UNMATCHED, rx_accept_flags);
|
|
bnx2x_set_bit(ECORE_ACCEPT_UNICAST, rx_accept_flags);
|
|
bnx2x_set_bit(ECORE_ACCEPT_ALL_MULTICAST, rx_accept_flags);
|
|
bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, rx_accept_flags);
|
|
|
|
/* internal switching mode */
|
|
bnx2x_set_bit(ECORE_ACCEPT_ALL_MULTICAST, tx_accept_flags);
|
|
bnx2x_set_bit(ECORE_ACCEPT_BROADCAST, tx_accept_flags);
|
|
|
|
if (IS_MF_SI(sc)) {
|
|
bnx2x_set_bit(ECORE_ACCEPT_ALL_UNICAST, tx_accept_flags);
|
|
} else {
|
|
bnx2x_set_bit(ECORE_ACCEPT_UNICAST, tx_accept_flags);
|
|
}
|
|
|
|
break;
|
|
|
|
default:
|
|
PMD_RX_LOG(ERR, "Unknown rx_mode (%d)", rx_mode);
|
|
return -1;
|
|
}
|
|
|
|
/* Set ACCEPT_ANY_VLAN as we do not enable filtering by VLAN */
|
|
if (rx_mode != BNX2X_RX_MODE_NONE) {
|
|
bnx2x_set_bit(ECORE_ACCEPT_ANY_VLAN, rx_accept_flags);
|
|
bnx2x_set_bit(ECORE_ACCEPT_ANY_VLAN, tx_accept_flags);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
bnx2x_set_q_rx_mode(struct bnx2x_softc *sc, uint8_t cl_id,
|
|
unsigned long rx_mode_flags,
|
|
unsigned long rx_accept_flags,
|
|
unsigned long tx_accept_flags, unsigned long ramrod_flags)
|
|
{
|
|
struct ecore_rx_mode_ramrod_params ramrod_param;
|
|
int rc;
|
|
|
|
memset(&ramrod_param, 0, sizeof(ramrod_param));
|
|
|
|
/* Prepare ramrod parameters */
|
|
ramrod_param.cid = 0;
|
|
ramrod_param.cl_id = cl_id;
|
|
ramrod_param.rx_mode_obj = &sc->rx_mode_obj;
|
|
ramrod_param.func_id = SC_FUNC(sc);
|
|
|
|
ramrod_param.pstate = &sc->sp_state;
|
|
ramrod_param.state = ECORE_FILTER_RX_MODE_PENDING;
|
|
|
|
ramrod_param.rdata = BNX2X_SP(sc, rx_mode_rdata);
|
|
ramrod_param.rdata_mapping =
|
|
(rte_iova_t)BNX2X_SP_MAPPING(sc, rx_mode_rdata),
|
|
bnx2x_set_bit(ECORE_FILTER_RX_MODE_PENDING, &sc->sp_state);
|
|
|
|
ramrod_param.ramrod_flags = ramrod_flags;
|
|
ramrod_param.rx_mode_flags = rx_mode_flags;
|
|
|
|
ramrod_param.rx_accept_flags = rx_accept_flags;
|
|
ramrod_param.tx_accept_flags = tx_accept_flags;
|
|
|
|
rc = ecore_config_rx_mode(sc, &ramrod_param);
|
|
if (rc < 0) {
|
|
PMD_RX_LOG(ERR, "Set rx_mode %d failed", sc->rx_mode);
|
|
return rc;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int bnx2x_set_storm_rx_mode(struct bnx2x_softc *sc)
|
|
{
|
|
unsigned long rx_mode_flags = 0, ramrod_flags = 0;
|
|
unsigned long rx_accept_flags = 0, tx_accept_flags = 0;
|
|
int rc;
|
|
|
|
rc = bnx2x_fill_accept_flags(sc, sc->rx_mode, &rx_accept_flags,
|
|
&tx_accept_flags);
|
|
if (rc) {
|
|
return rc;
|
|
}
|
|
|
|
bnx2x_set_bit(RAMROD_RX, &ramrod_flags);
|
|
bnx2x_set_bit(RAMROD_TX, &ramrod_flags);
|
|
bnx2x_set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
|
|
|
|
return bnx2x_set_q_rx_mode(sc, sc->fp[0].cl_id, rx_mode_flags,
|
|
rx_accept_flags, tx_accept_flags,
|
|
ramrod_flags);
|
|
}
|
|
|
|
/* returns the "mcp load_code" according to global load_count array */
|
|
static int bnx2x_nic_load_no_mcp(struct bnx2x_softc *sc)
|
|
{
|
|
int path = SC_PATH(sc);
|
|
int port = SC_PORT(sc);
|
|
|
|
PMD_DRV_LOG(INFO, sc, "NO MCP - load counts[%d] %d, %d, %d",
|
|
path, load_count[path][0], load_count[path][1],
|
|
load_count[path][2]);
|
|
|
|
load_count[path][0]++;
|
|
load_count[path][1 + port]++;
|
|
PMD_DRV_LOG(INFO, sc, "NO MCP - new load counts[%d] %d, %d, %d",
|
|
path, load_count[path][0], load_count[path][1],
|
|
load_count[path][2]);
|
|
if (load_count[path][0] == 1)
|
|
return FW_MSG_CODE_DRV_LOAD_COMMON;
|
|
else if (load_count[path][1 + port] == 1)
|
|
return FW_MSG_CODE_DRV_LOAD_PORT;
|
|
else
|
|
return FW_MSG_CODE_DRV_LOAD_FUNCTION;
|
|
}
|
|
|
|
/* returns the "mcp load_code" according to global load_count array */
|
|
static int bnx2x_nic_unload_no_mcp(struct bnx2x_softc *sc)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
int path = SC_PATH(sc);
|
|
|
|
PMD_DRV_LOG(INFO, sc, "NO MCP - load counts[%d] %d, %d, %d",
|
|
path, load_count[path][0], load_count[path][1],
|
|
load_count[path][2]);
|
|
load_count[path][0]--;
|
|
load_count[path][1 + port]--;
|
|
PMD_DRV_LOG(INFO, sc, "NO MCP - new load counts[%d] %d, %d, %d",
|
|
path, load_count[path][0], load_count[path][1],
|
|
load_count[path][2]);
|
|
if (load_count[path][0] == 0) {
|
|
return FW_MSG_CODE_DRV_UNLOAD_COMMON;
|
|
} else if (load_count[path][1 + port] == 0) {
|
|
return FW_MSG_CODE_DRV_UNLOAD_PORT;
|
|
} else {
|
|
return FW_MSG_CODE_DRV_UNLOAD_FUNCTION;
|
|
}
|
|
}
|
|
|
|
/* request unload mode from the MCP: COMMON, PORT or FUNCTION */
|
|
static uint32_t bnx2x_send_unload_req(struct bnx2x_softc *sc, int unload_mode)
|
|
{
|
|
uint32_t reset_code = 0;
|
|
|
|
/* Select the UNLOAD request mode */
|
|
if (unload_mode == UNLOAD_NORMAL) {
|
|
reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
|
|
} else {
|
|
reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
|
|
}
|
|
|
|
/* Send the request to the MCP */
|
|
if (!BNX2X_NOMCP(sc)) {
|
|
reset_code = bnx2x_fw_command(sc, reset_code, 0);
|
|
} else {
|
|
reset_code = bnx2x_nic_unload_no_mcp(sc);
|
|
}
|
|
|
|
return reset_code;
|
|
}
|
|
|
|
/* send UNLOAD_DONE command to the MCP */
|
|
static void bnx2x_send_unload_done(struct bnx2x_softc *sc, uint8_t keep_link)
|
|
{
|
|
uint32_t reset_param =
|
|
keep_link ? DRV_MSG_CODE_UNLOAD_SKIP_LINK_RESET : 0;
|
|
|
|
/* Report UNLOAD_DONE to MCP */
|
|
if (!BNX2X_NOMCP(sc)) {
|
|
bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_DONE, reset_param);
|
|
}
|
|
}
|
|
|
|
static int bnx2x_func_wait_started(struct bnx2x_softc *sc)
|
|
{
|
|
int tout = 50;
|
|
|
|
if (!sc->port.pmf) {
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* (assumption: No Attention from MCP at this stage)
|
|
* PMF probably in the middle of TX disable/enable transaction
|
|
* 1. Sync IRS for default SB
|
|
* 2. Sync SP queue - this guarantees us that attention handling started
|
|
* 3. Wait, that TX disable/enable transaction completes
|
|
*
|
|
* 1+2 guarantee that if DCBX attention was scheduled it already changed
|
|
* pending bit of transaction from STARTED-->TX_STOPPED, if we already
|
|
* received completion for the transaction the state is TX_STOPPED.
|
|
* State will return to STARTED after completion of TX_STOPPED-->STARTED
|
|
* transaction.
|
|
*/
|
|
|
|
while (ecore_func_get_state(sc, &sc->func_obj) !=
|
|
ECORE_F_STATE_STARTED && tout--) {
|
|
DELAY(20000);
|
|
}
|
|
|
|
if (ecore_func_get_state(sc, &sc->func_obj) != ECORE_F_STATE_STARTED) {
|
|
/*
|
|
* Failed to complete the transaction in a "good way"
|
|
* Force both transactions with CLR bit.
|
|
*/
|
|
struct ecore_func_state_params func_params = { NULL };
|
|
|
|
PMD_DRV_LOG(NOTICE, sc, "Unexpected function state! "
|
|
"Forcing STARTED-->TX_STOPPED-->STARTED");
|
|
|
|
func_params.f_obj = &sc->func_obj;
|
|
bnx2x_set_bit(RAMROD_DRV_CLR_ONLY, &func_params.ramrod_flags);
|
|
|
|
/* STARTED-->TX_STOPPED */
|
|
func_params.cmd = ECORE_F_CMD_TX_STOP;
|
|
ecore_func_state_change(sc, &func_params);
|
|
|
|
/* TX_STOPPED-->STARTED */
|
|
func_params.cmd = ECORE_F_CMD_TX_START;
|
|
return ecore_func_state_change(sc, &func_params);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_stop_queue(struct bnx2x_softc *sc, int index)
|
|
{
|
|
struct bnx2x_fastpath *fp = &sc->fp[index];
|
|
struct ecore_queue_state_params q_params = { NULL };
|
|
int rc;
|
|
|
|
PMD_DRV_LOG(DEBUG, sc, "stopping queue %d cid %d", index, fp->index);
|
|
|
|
q_params.q_obj = &sc->sp_objs[fp->index].q_obj;
|
|
/* We want to wait for completion in this context */
|
|
bnx2x_set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags);
|
|
|
|
/* Stop the primary connection: */
|
|
|
|
/* ...halt the connection */
|
|
q_params.cmd = ECORE_Q_CMD_HALT;
|
|
rc = ecore_queue_state_change(sc, &q_params);
|
|
if (rc) {
|
|
return rc;
|
|
}
|
|
|
|
/* ...terminate the connection */
|
|
q_params.cmd = ECORE_Q_CMD_TERMINATE;
|
|
memset(&q_params.params.terminate, 0,
|
|
sizeof(q_params.params.terminate));
|
|
q_params.params.terminate.cid_index = FIRST_TX_COS_INDEX;
|
|
rc = ecore_queue_state_change(sc, &q_params);
|
|
if (rc) {
|
|
return rc;
|
|
}
|
|
|
|
/* ...delete cfc entry */
|
|
q_params.cmd = ECORE_Q_CMD_CFC_DEL;
|
|
memset(&q_params.params.cfc_del, 0, sizeof(q_params.params.cfc_del));
|
|
q_params.params.cfc_del.cid_index = FIRST_TX_COS_INDEX;
|
|
return ecore_queue_state_change(sc, &q_params);
|
|
}
|
|
|
|
/* wait for the outstanding SP commands */
|
|
static uint8_t bnx2x_wait_sp_comp(struct bnx2x_softc *sc, unsigned long mask)
|
|
{
|
|
unsigned long tmp;
|
|
int tout = 5000; /* wait for 5 secs tops */
|
|
|
|
while (tout--) {
|
|
mb();
|
|
if (!(atomic_load_acq_long(&sc->sp_state) & mask)) {
|
|
return TRUE;
|
|
}
|
|
|
|
DELAY(1000);
|
|
}
|
|
|
|
mb();
|
|
|
|
tmp = atomic_load_acq_long(&sc->sp_state);
|
|
if (tmp & mask) {
|
|
PMD_DRV_LOG(INFO, sc, "Filtering completion timed out: "
|
|
"sp_state 0x%lx, mask 0x%lx", tmp, mask);
|
|
return FALSE;
|
|
}
|
|
|
|
return FALSE;
|
|
}
|
|
|
|
static int bnx2x_func_stop(struct bnx2x_softc *sc)
|
|
{
|
|
struct ecore_func_state_params func_params = { NULL };
|
|
int rc;
|
|
|
|
/* prepare parameters for function state transitions */
|
|
bnx2x_set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
|
|
func_params.f_obj = &sc->func_obj;
|
|
func_params.cmd = ECORE_F_CMD_STOP;
|
|
|
|
/*
|
|
* Try to stop the function the 'good way'. If it fails (in case
|
|
* of a parity error during bnx2x_chip_cleanup()) and we are
|
|
* not in a debug mode, perform a state transaction in order to
|
|
* enable further HW_RESET transaction.
|
|
*/
|
|
rc = ecore_func_state_change(sc, &func_params);
|
|
if (rc) {
|
|
PMD_DRV_LOG(NOTICE, sc, "FUNC_STOP ramrod failed. "
|
|
"Running a dry transaction");
|
|
bnx2x_set_bit(RAMROD_DRV_CLR_ONLY, &func_params.ramrod_flags);
|
|
return ecore_func_state_change(sc, &func_params);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_reset_hw(struct bnx2x_softc *sc, uint32_t load_code)
|
|
{
|
|
struct ecore_func_state_params func_params = { NULL };
|
|
|
|
/* Prepare parameters for function state transitions */
|
|
bnx2x_set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
|
|
|
|
func_params.f_obj = &sc->func_obj;
|
|
func_params.cmd = ECORE_F_CMD_HW_RESET;
|
|
|
|
func_params.params.hw_init.load_phase = load_code;
|
|
|
|
return ecore_func_state_change(sc, &func_params);
|
|
}
|
|
|
|
static void bnx2x_int_disable_sync(struct bnx2x_softc *sc, int disable_hw)
|
|
{
|
|
if (disable_hw) {
|
|
/* prevent the HW from sending interrupts */
|
|
bnx2x_int_disable(sc);
|
|
}
|
|
}
|
|
|
|
static void
|
|
bnx2x_chip_cleanup(struct bnx2x_softc *sc, uint32_t unload_mode, uint8_t keep_link)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
struct ecore_mcast_ramrod_params rparam = { NULL };
|
|
uint32_t reset_code;
|
|
int i, rc = 0;
|
|
|
|
bnx2x_drain_tx_queues(sc);
|
|
|
|
/* give HW time to discard old tx messages */
|
|
DELAY(1000);
|
|
|
|
/* Clean all ETH MACs */
|
|
rc = bnx2x_del_all_macs(sc, &sc->sp_objs[0].mac_obj, ECORE_ETH_MAC,
|
|
FALSE);
|
|
if (rc < 0) {
|
|
PMD_DRV_LOG(NOTICE, sc,
|
|
"Failed to delete all ETH MACs (%d)", rc);
|
|
}
|
|
|
|
/* Clean up UC list */
|
|
rc = bnx2x_del_all_macs(sc, &sc->sp_objs[0].mac_obj, ECORE_UC_LIST_MAC,
|
|
TRUE);
|
|
if (rc < 0) {
|
|
PMD_DRV_LOG(NOTICE, sc,
|
|
"Failed to delete UC MACs list (%d)", rc);
|
|
}
|
|
|
|
/* Disable LLH */
|
|
REG_WR(sc, NIG_REG_LLH0_FUNC_EN + port * 8, 0);
|
|
|
|
/* Set "drop all" to stop Rx */
|
|
|
|
/*
|
|
* We need to take the if_maddr_lock() here in order to prevent
|
|
* a race between the completion code and this code.
|
|
*/
|
|
|
|
if (bnx2x_test_bit(ECORE_FILTER_RX_MODE_PENDING, &sc->sp_state)) {
|
|
bnx2x_set_bit(ECORE_FILTER_RX_MODE_SCHED, &sc->sp_state);
|
|
} else {
|
|
bnx2x_set_storm_rx_mode(sc);
|
|
}
|
|
|
|
/* Clean up multicast configuration */
|
|
rparam.mcast_obj = &sc->mcast_obj;
|
|
rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_DEL);
|
|
if (rc < 0) {
|
|
PMD_DRV_LOG(NOTICE, sc,
|
|
"Failed to send DEL MCAST command (%d)", rc);
|
|
}
|
|
|
|
/*
|
|
* Send the UNLOAD_REQUEST to the MCP. This will return if
|
|
* this function should perform FUNCTION, PORT, or COMMON HW
|
|
* reset.
|
|
*/
|
|
reset_code = bnx2x_send_unload_req(sc, unload_mode);
|
|
|
|
/*
|
|
* (assumption: No Attention from MCP at this stage)
|
|
* PMF probably in the middle of TX disable/enable transaction
|
|
*/
|
|
rc = bnx2x_func_wait_started(sc);
|
|
if (rc) {
|
|
PMD_DRV_LOG(NOTICE, sc, "bnx2x_func_wait_started failed");
|
|
}
|
|
|
|
/*
|
|
* Close multi and leading connections
|
|
* Completions for ramrods are collected in a synchronous way
|
|
*/
|
|
for (i = 0; i < sc->num_queues; i++) {
|
|
if (bnx2x_stop_queue(sc, i)) {
|
|
goto unload_error;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* If SP settings didn't get completed so far - something
|
|
* very wrong has happen.
|
|
*/
|
|
if (!bnx2x_wait_sp_comp(sc, ~0x0UL)) {
|
|
PMD_DRV_LOG(NOTICE, sc, "Common slow path ramrods got stuck!");
|
|
}
|
|
|
|
unload_error:
|
|
|
|
rc = bnx2x_func_stop(sc);
|
|
if (rc) {
|
|
PMD_DRV_LOG(NOTICE, sc, "Function stop failed!");
|
|
}
|
|
|
|
/* disable HW interrupts */
|
|
bnx2x_int_disable_sync(sc, TRUE);
|
|
|
|
/* Reset the chip */
|
|
rc = bnx2x_reset_hw(sc, reset_code);
|
|
if (rc) {
|
|
PMD_DRV_LOG(NOTICE, sc, "Hardware reset failed");
|
|
}
|
|
|
|
/* Report UNLOAD_DONE to MCP */
|
|
bnx2x_send_unload_done(sc, keep_link);
|
|
}
|
|
|
|
static void bnx2x_disable_close_the_gate(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
|
|
PMD_DRV_LOG(DEBUG, sc, "Disabling 'close the gates'");
|
|
|
|
val = REG_RD(sc, MISC_REG_AEU_GENERAL_MASK);
|
|
val &= ~(MISC_AEU_GENERAL_MASK_REG_AEU_PXP_CLOSE_MASK |
|
|
MISC_AEU_GENERAL_MASK_REG_AEU_NIG_CLOSE_MASK);
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_MASK, val);
|
|
}
|
|
|
|
/*
|
|
* Cleans the object that have internal lists without sending
|
|
* ramrods. Should be run when interrutps are disabled.
|
|
*/
|
|
static void bnx2x_squeeze_objects(struct bnx2x_softc *sc)
|
|
{
|
|
unsigned long ramrod_flags = 0, vlan_mac_flags = 0;
|
|
struct ecore_mcast_ramrod_params rparam = { NULL };
|
|
struct ecore_vlan_mac_obj *mac_obj = &sc->sp_objs->mac_obj;
|
|
int rc;
|
|
|
|
/* Cleanup MACs' object first... */
|
|
|
|
/* Wait for completion of requested */
|
|
bnx2x_set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
|
|
/* Perform a dry cleanup */
|
|
bnx2x_set_bit(RAMROD_DRV_CLR_ONLY, &ramrod_flags);
|
|
|
|
/* Clean ETH primary MAC */
|
|
bnx2x_set_bit(ECORE_ETH_MAC, &vlan_mac_flags);
|
|
rc = mac_obj->delete_all(sc, &sc->sp_objs->mac_obj, &vlan_mac_flags,
|
|
&ramrod_flags);
|
|
if (rc != 0) {
|
|
PMD_DRV_LOG(NOTICE, sc, "Failed to clean ETH MACs (%d)", rc);
|
|
}
|
|
|
|
/* Cleanup UC list */
|
|
vlan_mac_flags = 0;
|
|
bnx2x_set_bit(ECORE_UC_LIST_MAC, &vlan_mac_flags);
|
|
rc = mac_obj->delete_all(sc, mac_obj, &vlan_mac_flags, &ramrod_flags);
|
|
if (rc != 0) {
|
|
PMD_DRV_LOG(NOTICE, sc,
|
|
"Failed to clean UC list MACs (%d)", rc);
|
|
}
|
|
|
|
/* Now clean mcast object... */
|
|
|
|
rparam.mcast_obj = &sc->mcast_obj;
|
|
bnx2x_set_bit(RAMROD_DRV_CLR_ONLY, &rparam.ramrod_flags);
|
|
|
|
/* Add a DEL command... */
|
|
rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_DEL);
|
|
if (rc < 0) {
|
|
PMD_DRV_LOG(NOTICE, sc,
|
|
"Failed to send DEL MCAST command (%d)", rc);
|
|
}
|
|
|
|
/* now wait until all pending commands are cleared */
|
|
|
|
rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_CONT);
|
|
while (rc != 0) {
|
|
if (rc < 0) {
|
|
PMD_DRV_LOG(NOTICE, sc,
|
|
"Failed to clean MCAST object (%d)", rc);
|
|
return;
|
|
}
|
|
|
|
rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_CONT);
|
|
}
|
|
}
|
|
|
|
/* stop the controller */
|
|
__rte_noinline
|
|
int
|
|
bnx2x_nic_unload(struct bnx2x_softc *sc, uint32_t unload_mode, uint8_t keep_link)
|
|
{
|
|
uint8_t global = FALSE;
|
|
uint32_t val;
|
|
|
|
PMD_INIT_FUNC_TRACE(sc);
|
|
|
|
PMD_DRV_LOG(DEBUG, sc, "Starting NIC unload...");
|
|
|
|
/* mark driver as unloaded in shmem2 */
|
|
if (IS_PF(sc) && SHMEM2_HAS(sc, drv_capabilities_flag)) {
|
|
val = SHMEM2_RD(sc, drv_capabilities_flag[SC_FW_MB_IDX(sc)]);
|
|
SHMEM2_WR(sc, drv_capabilities_flag[SC_FW_MB_IDX(sc)],
|
|
val & ~DRV_FLAGS_CAPABILITIES_LOADED_L2);
|
|
}
|
|
|
|
if (IS_PF(sc) && sc->recovery_state != BNX2X_RECOVERY_DONE &&
|
|
(sc->state == BNX2X_STATE_CLOSED || sc->state == BNX2X_STATE_ERROR)) {
|
|
/*
|
|
* We can get here if the driver has been unloaded
|
|
* during parity error recovery and is either waiting for a
|
|
* leader to complete or for other functions to unload and
|
|
* then ifconfig down has been issued. In this case we want to
|
|
* unload and let other functions to complete a recovery
|
|
* process.
|
|
*/
|
|
sc->recovery_state = BNX2X_RECOVERY_DONE;
|
|
sc->is_leader = 0;
|
|
bnx2x_release_leader_lock(sc);
|
|
mb();
|
|
|
|
PMD_DRV_LOG(NOTICE, sc, "Can't unload in closed or error state");
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* Nothing to do during unload if previous bnx2x_nic_load()
|
|
* did not completed successfully - all resourses are released.
|
|
*/
|
|
if ((sc->state == BNX2X_STATE_CLOSED) || (sc->state == BNX2X_STATE_ERROR)) {
|
|
return 0;
|
|
}
|
|
|
|
sc->state = BNX2X_STATE_CLOSING_WAITING_HALT;
|
|
mb();
|
|
|
|
sc->rx_mode = BNX2X_RX_MODE_NONE;
|
|
bnx2x_set_rx_mode(sc);
|
|
mb();
|
|
|
|
if (IS_PF(sc)) {
|
|
/* set ALWAYS_ALIVE bit in shmem */
|
|
sc->fw_drv_pulse_wr_seq |= DRV_PULSE_ALWAYS_ALIVE;
|
|
|
|
bnx2x_drv_pulse(sc);
|
|
|
|
bnx2x_stats_handle(sc, STATS_EVENT_STOP);
|
|
bnx2x_save_statistics(sc);
|
|
}
|
|
|
|
/* wait till consumers catch up with producers in all queues */
|
|
bnx2x_drain_tx_queues(sc);
|
|
|
|
/* if VF indicate to PF this function is going down (PF will delete sp
|
|
* elements and clear initializations
|
|
*/
|
|
if (IS_VF(sc)) {
|
|
bnx2x_vf_unload(sc);
|
|
} else if (unload_mode != UNLOAD_RECOVERY) {
|
|
/* if this is a normal/close unload need to clean up chip */
|
|
bnx2x_chip_cleanup(sc, unload_mode, keep_link);
|
|
} else {
|
|
/* Send the UNLOAD_REQUEST to the MCP */
|
|
bnx2x_send_unload_req(sc, unload_mode);
|
|
|
|
/*
|
|
* Prevent transactions to host from the functions on the
|
|
* engine that doesn't reset global blocks in case of global
|
|
* attention once gloabl blocks are reset and gates are opened
|
|
* (the engine which leader will perform the recovery
|
|
* last).
|
|
*/
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
bnx2x_pf_disable(sc);
|
|
}
|
|
|
|
/* disable HW interrupts */
|
|
bnx2x_int_disable_sync(sc, TRUE);
|
|
|
|
/* Report UNLOAD_DONE to MCP */
|
|
bnx2x_send_unload_done(sc, FALSE);
|
|
}
|
|
|
|
/*
|
|
* At this stage no more interrupts will arrive so we may safely clean
|
|
* the queue'able objects here in case they failed to get cleaned so far.
|
|
*/
|
|
if (IS_PF(sc)) {
|
|
bnx2x_squeeze_objects(sc);
|
|
}
|
|
|
|
/* There should be no more pending SP commands at this stage */
|
|
sc->sp_state = 0;
|
|
|
|
sc->port.pmf = 0;
|
|
|
|
if (IS_PF(sc)) {
|
|
bnx2x_free_mem(sc);
|
|
}
|
|
|
|
/* free the host hardware/software hsi structures */
|
|
bnx2x_free_hsi_mem(sc);
|
|
|
|
bnx2x_free_fw_stats_mem(sc);
|
|
|
|
sc->state = BNX2X_STATE_CLOSED;
|
|
|
|
/*
|
|
* Check if there are pending parity attentions. If there are - set
|
|
* RECOVERY_IN_PROGRESS.
|
|
*/
|
|
if (IS_PF(sc) && bnx2x_chk_parity_attn(sc, &global, FALSE)) {
|
|
bnx2x_set_reset_in_progress(sc);
|
|
|
|
/* Set RESET_IS_GLOBAL if needed */
|
|
if (global) {
|
|
bnx2x_set_reset_global(sc);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* The last driver must disable a "close the gate" if there is no
|
|
* parity attention or "process kill" pending.
|
|
*/
|
|
if (IS_PF(sc) && !bnx2x_clear_pf_load(sc) &&
|
|
bnx2x_reset_is_done(sc, SC_PATH(sc))) {
|
|
bnx2x_disable_close_the_gate(sc);
|
|
}
|
|
|
|
PMD_DRV_LOG(DEBUG, sc, "Ended NIC unload");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Encapsulte an mbuf cluster into the tx bd chain and makes the memory
|
|
* visible to the controller.
|
|
*
|
|
* If an mbuf is submitted to this routine and cannot be given to the
|
|
* controller (e.g. it has too many fragments) then the function may free
|
|
* the mbuf and return to the caller.
|
|
*
|
|
* Returns:
|
|
* int: Number of TX BDs used for the mbuf
|
|
*
|
|
* Note the side effect that an mbuf may be freed if it causes a problem.
|
|
*/
|
|
int bnx2x_tx_encap(struct bnx2x_tx_queue *txq, struct rte_mbuf *m0)
|
|
{
|
|
struct eth_tx_start_bd *tx_start_bd;
|
|
uint16_t bd_prod, pkt_prod;
|
|
struct bnx2x_softc *sc;
|
|
uint32_t nbds = 0;
|
|
|
|
sc = txq->sc;
|
|
bd_prod = txq->tx_bd_tail;
|
|
pkt_prod = txq->tx_pkt_tail;
|
|
|
|
txq->sw_ring[TX_BD(pkt_prod, txq)] = m0;
|
|
|
|
tx_start_bd = &txq->tx_ring[TX_BD(bd_prod, txq)].start_bd;
|
|
|
|
tx_start_bd->addr_lo =
|
|
rte_cpu_to_le_32(U64_LO(rte_mbuf_data_iova(m0)));
|
|
tx_start_bd->addr_hi =
|
|
rte_cpu_to_le_32(U64_HI(rte_mbuf_data_iova(m0)));
|
|
tx_start_bd->nbytes = rte_cpu_to_le_16(m0->data_len);
|
|
tx_start_bd->bd_flags.as_bitfield = ETH_TX_BD_FLAGS_START_BD;
|
|
tx_start_bd->general_data =
|
|
(1 << ETH_TX_START_BD_HDR_NBDS_SHIFT);
|
|
|
|
tx_start_bd->nbd = rte_cpu_to_le_16(2);
|
|
|
|
if (m0->ol_flags & PKT_TX_VLAN_PKT) {
|
|
tx_start_bd->vlan_or_ethertype =
|
|
rte_cpu_to_le_16(m0->vlan_tci);
|
|
tx_start_bd->bd_flags.as_bitfield |=
|
|
(X_ETH_OUTBAND_VLAN <<
|
|
ETH_TX_BD_FLAGS_VLAN_MODE_SHIFT);
|
|
} else {
|
|
if (IS_PF(sc))
|
|
tx_start_bd->vlan_or_ethertype =
|
|
rte_cpu_to_le_16(pkt_prod);
|
|
else {
|
|
struct rte_ether_hdr *eh =
|
|
rte_pktmbuf_mtod(m0, struct rte_ether_hdr *);
|
|
|
|
tx_start_bd->vlan_or_ethertype =
|
|
rte_cpu_to_le_16(rte_be_to_cpu_16(eh->ether_type));
|
|
}
|
|
}
|
|
|
|
bd_prod = NEXT_TX_BD(bd_prod);
|
|
if (IS_VF(sc)) {
|
|
struct eth_tx_parse_bd_e2 *tx_parse_bd;
|
|
const struct rte_ether_hdr *eh =
|
|
rte_pktmbuf_mtod(m0, struct rte_ether_hdr *);
|
|
uint8_t mac_type = UNICAST_ADDRESS;
|
|
|
|
tx_parse_bd =
|
|
&txq->tx_ring[TX_BD(bd_prod, txq)].parse_bd_e2;
|
|
if (rte_is_multicast_ether_addr(&eh->d_addr)) {
|
|
if (rte_is_broadcast_ether_addr(&eh->d_addr))
|
|
mac_type = BROADCAST_ADDRESS;
|
|
else
|
|
mac_type = MULTICAST_ADDRESS;
|
|
}
|
|
tx_parse_bd->parsing_data =
|
|
(mac_type << ETH_TX_PARSE_BD_E2_ETH_ADDR_TYPE_SHIFT);
|
|
|
|
rte_memcpy(&tx_parse_bd->data.mac_addr.dst_hi,
|
|
&eh->d_addr.addr_bytes[0], 2);
|
|
rte_memcpy(&tx_parse_bd->data.mac_addr.dst_mid,
|
|
&eh->d_addr.addr_bytes[2], 2);
|
|
rte_memcpy(&tx_parse_bd->data.mac_addr.dst_lo,
|
|
&eh->d_addr.addr_bytes[4], 2);
|
|
rte_memcpy(&tx_parse_bd->data.mac_addr.src_hi,
|
|
&eh->s_addr.addr_bytes[0], 2);
|
|
rte_memcpy(&tx_parse_bd->data.mac_addr.src_mid,
|
|
&eh->s_addr.addr_bytes[2], 2);
|
|
rte_memcpy(&tx_parse_bd->data.mac_addr.src_lo,
|
|
&eh->s_addr.addr_bytes[4], 2);
|
|
|
|
tx_parse_bd->data.mac_addr.dst_hi =
|
|
rte_cpu_to_be_16(tx_parse_bd->data.mac_addr.dst_hi);
|
|
tx_parse_bd->data.mac_addr.dst_mid =
|
|
rte_cpu_to_be_16(tx_parse_bd->data.
|
|
mac_addr.dst_mid);
|
|
tx_parse_bd->data.mac_addr.dst_lo =
|
|
rte_cpu_to_be_16(tx_parse_bd->data.mac_addr.dst_lo);
|
|
tx_parse_bd->data.mac_addr.src_hi =
|
|
rte_cpu_to_be_16(tx_parse_bd->data.mac_addr.src_hi);
|
|
tx_parse_bd->data.mac_addr.src_mid =
|
|
rte_cpu_to_be_16(tx_parse_bd->data.
|
|
mac_addr.src_mid);
|
|
tx_parse_bd->data.mac_addr.src_lo =
|
|
rte_cpu_to_be_16(tx_parse_bd->data.mac_addr.src_lo);
|
|
|
|
PMD_TX_LOG(DEBUG,
|
|
"PBD dst %x %x %x src %x %x %x p_data %x",
|
|
tx_parse_bd->data.mac_addr.dst_hi,
|
|
tx_parse_bd->data.mac_addr.dst_mid,
|
|
tx_parse_bd->data.mac_addr.dst_lo,
|
|
tx_parse_bd->data.mac_addr.src_hi,
|
|
tx_parse_bd->data.mac_addr.src_mid,
|
|
tx_parse_bd->data.mac_addr.src_lo,
|
|
tx_parse_bd->parsing_data);
|
|
}
|
|
|
|
PMD_TX_LOG(DEBUG,
|
|
"start bd: nbytes %d flags %x vlan %x",
|
|
tx_start_bd->nbytes,
|
|
tx_start_bd->bd_flags.as_bitfield,
|
|
tx_start_bd->vlan_or_ethertype);
|
|
|
|
bd_prod = NEXT_TX_BD(bd_prod);
|
|
pkt_prod++;
|
|
|
|
if (TX_IDX(bd_prod) < 2)
|
|
nbds++;
|
|
|
|
txq->nb_tx_avail -= 2;
|
|
txq->tx_bd_tail = bd_prod;
|
|
txq->tx_pkt_tail = pkt_prod;
|
|
|
|
return nbds + 2;
|
|
}
|
|
|
|
static uint16_t bnx2x_cid_ilt_lines(struct bnx2x_softc *sc)
|
|
{
|
|
return L2_ILT_LINES(sc);
|
|
}
|
|
|
|
static void bnx2x_ilt_set_info(struct bnx2x_softc *sc)
|
|
{
|
|
struct ilt_client_info *ilt_client;
|
|
struct ecore_ilt *ilt = sc->ilt;
|
|
uint16_t line = 0;
|
|
|
|
PMD_INIT_FUNC_TRACE(sc);
|
|
|
|
ilt->start_line = FUNC_ILT_BASE(SC_FUNC(sc));
|
|
|
|
/* CDU */
|
|
ilt_client = &ilt->clients[ILT_CLIENT_CDU];
|
|
ilt_client->client_num = ILT_CLIENT_CDU;
|
|
ilt_client->page_size = CDU_ILT_PAGE_SZ;
|
|
ilt_client->flags = ILT_CLIENT_SKIP_MEM;
|
|
ilt_client->start = line;
|
|
line += bnx2x_cid_ilt_lines(sc);
|
|
|
|
if (CNIC_SUPPORT(sc)) {
|
|
line += CNIC_ILT_LINES;
|
|
}
|
|
|
|
ilt_client->end = (line - 1);
|
|
|
|
/* QM */
|
|
if (QM_INIT(sc->qm_cid_count)) {
|
|
ilt_client = &ilt->clients[ILT_CLIENT_QM];
|
|
ilt_client->client_num = ILT_CLIENT_QM;
|
|
ilt_client->page_size = QM_ILT_PAGE_SZ;
|
|
ilt_client->flags = 0;
|
|
ilt_client->start = line;
|
|
|
|
/* 4 bytes for each cid */
|
|
line += DIV_ROUND_UP(sc->qm_cid_count * QM_QUEUES_PER_FUNC * 4,
|
|
QM_ILT_PAGE_SZ);
|
|
|
|
ilt_client->end = (line - 1);
|
|
}
|
|
|
|
if (CNIC_SUPPORT(sc)) {
|
|
/* SRC */
|
|
ilt_client = &ilt->clients[ILT_CLIENT_SRC];
|
|
ilt_client->client_num = ILT_CLIENT_SRC;
|
|
ilt_client->page_size = SRC_ILT_PAGE_SZ;
|
|
ilt_client->flags = 0;
|
|
ilt_client->start = line;
|
|
line += SRC_ILT_LINES;
|
|
ilt_client->end = (line - 1);
|
|
|
|
/* TM */
|
|
ilt_client = &ilt->clients[ILT_CLIENT_TM];
|
|
ilt_client->client_num = ILT_CLIENT_TM;
|
|
ilt_client->page_size = TM_ILT_PAGE_SZ;
|
|
ilt_client->flags = 0;
|
|
ilt_client->start = line;
|
|
line += TM_ILT_LINES;
|
|
ilt_client->end = (line - 1);
|
|
}
|
|
|
|
assert((line <= ILT_MAX_LINES));
|
|
}
|
|
|
|
static void bnx2x_set_fp_rx_buf_size(struct bnx2x_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < sc->num_queues; i++) {
|
|
/* get the Rx buffer size for RX frames */
|
|
sc->fp[i].rx_buf_size =
|
|
(IP_HEADER_ALIGNMENT_PADDING + ETH_OVERHEAD + sc->mtu);
|
|
}
|
|
}
|
|
|
|
int bnx2x_alloc_ilt_mem(struct bnx2x_softc *sc)
|
|
{
|
|
|
|
sc->ilt = rte_malloc("", sizeof(struct ecore_ilt), RTE_CACHE_LINE_SIZE);
|
|
|
|
return sc->ilt == NULL;
|
|
}
|
|
|
|
static int bnx2x_alloc_ilt_lines_mem(struct bnx2x_softc *sc)
|
|
{
|
|
sc->ilt->lines = rte_calloc("",
|
|
sizeof(struct ilt_line), ILT_MAX_LINES,
|
|
RTE_CACHE_LINE_SIZE);
|
|
return sc->ilt->lines == NULL;
|
|
}
|
|
|
|
void bnx2x_free_ilt_mem(struct bnx2x_softc *sc)
|
|
{
|
|
rte_free(sc->ilt);
|
|
sc->ilt = NULL;
|
|
}
|
|
|
|
static void bnx2x_free_ilt_lines_mem(struct bnx2x_softc *sc)
|
|
{
|
|
if (sc->ilt->lines != NULL) {
|
|
rte_free(sc->ilt->lines);
|
|
sc->ilt->lines = NULL;
|
|
}
|
|
}
|
|
|
|
static void bnx2x_free_mem(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t i;
|
|
|
|
for (i = 0; i < L2_ILT_LINES(sc); i++) {
|
|
sc->context[i].vcxt = NULL;
|
|
sc->context[i].size = 0;
|
|
}
|
|
|
|
ecore_ilt_mem_op(sc, ILT_MEMOP_FREE);
|
|
|
|
bnx2x_free_ilt_lines_mem(sc);
|
|
}
|
|
|
|
static int bnx2x_alloc_mem(struct bnx2x_softc *sc)
|
|
{
|
|
int context_size;
|
|
int allocated;
|
|
int i;
|
|
char cdu_name[RTE_MEMZONE_NAMESIZE];
|
|
|
|
/*
|
|
* Allocate memory for CDU context:
|
|
* This memory is allocated separately and not in the generic ILT
|
|
* functions because CDU differs in few aspects:
|
|
* 1. There can be multiple entities allocating memory for context -
|
|
* regular L2, CNIC, and SRIOV drivers. Each separately controls
|
|
* its own ILT lines.
|
|
* 2. Since CDU page-size is not a single 4KB page (which is the case
|
|
* for the other ILT clients), to be efficient we want to support
|
|
* allocation of sub-page-size in the last entry.
|
|
* 3. Context pointers are used by the driver to pass to FW / update
|
|
* the context (for the other ILT clients the pointers are used just to
|
|
* free the memory during unload).
|
|
*/
|
|
context_size = (sizeof(union cdu_context) * BNX2X_L2_CID_COUNT(sc));
|
|
for (i = 0, allocated = 0; allocated < context_size; i++) {
|
|
sc->context[i].size = min(CDU_ILT_PAGE_SZ,
|
|
(context_size - allocated));
|
|
|
|
snprintf(cdu_name, sizeof(cdu_name), "cdu_%d", i);
|
|
if (bnx2x_dma_alloc(sc, sc->context[i].size,
|
|
&sc->context[i].vcxt_dma,
|
|
cdu_name, BNX2X_PAGE_SIZE) != 0) {
|
|
bnx2x_free_mem(sc);
|
|
return -1;
|
|
}
|
|
|
|
sc->context[i].vcxt =
|
|
(union cdu_context *)sc->context[i].vcxt_dma.vaddr;
|
|
|
|
allocated += sc->context[i].size;
|
|
}
|
|
|
|
bnx2x_alloc_ilt_lines_mem(sc);
|
|
|
|
if (ecore_ilt_mem_op(sc, ILT_MEMOP_ALLOC)) {
|
|
PMD_DRV_LOG(NOTICE, sc, "ecore_ilt_mem_op ILT_MEMOP_ALLOC failed");
|
|
bnx2x_free_mem(sc);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bnx2x_free_fw_stats_mem(struct bnx2x_softc *sc)
|
|
{
|
|
bnx2x_dma_free(&sc->fw_stats_dma);
|
|
sc->fw_stats_num = 0;
|
|
|
|
sc->fw_stats_req_size = 0;
|
|
sc->fw_stats_req = NULL;
|
|
sc->fw_stats_req_mapping = 0;
|
|
|
|
sc->fw_stats_data_size = 0;
|
|
sc->fw_stats_data = NULL;
|
|
sc->fw_stats_data_mapping = 0;
|
|
}
|
|
|
|
static int bnx2x_alloc_fw_stats_mem(struct bnx2x_softc *sc)
|
|
{
|
|
uint8_t num_queue_stats;
|
|
int num_groups, vf_headroom = 0;
|
|
|
|
/* number of queues for statistics is number of eth queues */
|
|
num_queue_stats = BNX2X_NUM_ETH_QUEUES(sc);
|
|
|
|
/*
|
|
* Total number of FW statistics requests =
|
|
* 1 for port stats + 1 for PF stats + num of queues
|
|
*/
|
|
sc->fw_stats_num = (2 + num_queue_stats);
|
|
|
|
/*
|
|
* Request is built from stats_query_header and an array of
|
|
* stats_query_cmd_group each of which contains STATS_QUERY_CMD_COUNT
|
|
* rules. The real number or requests is configured in the
|
|
* stats_query_header.
|
|
*/
|
|
num_groups = (sc->fw_stats_num + vf_headroom) / STATS_QUERY_CMD_COUNT;
|
|
if ((sc->fw_stats_num + vf_headroom) % STATS_QUERY_CMD_COUNT)
|
|
num_groups++;
|
|
|
|
sc->fw_stats_req_size =
|
|
(sizeof(struct stats_query_header) +
|
|
(num_groups * sizeof(struct stats_query_cmd_group)));
|
|
|
|
/*
|
|
* Data for statistics requests + stats_counter.
|
|
* stats_counter holds per-STORM counters that are incremented when
|
|
* STORM has finished with the current request. Memory for FCoE
|
|
* offloaded statistics are counted anyway, even if they will not be sent.
|
|
* VF stats are not accounted for here as the data of VF stats is stored
|
|
* in memory allocated by the VF, not here.
|
|
*/
|
|
sc->fw_stats_data_size =
|
|
(sizeof(struct stats_counter) +
|
|
sizeof(struct per_port_stats) + sizeof(struct per_pf_stats) +
|
|
/* sizeof(struct fcoe_statistics_params) + */
|
|
(sizeof(struct per_queue_stats) * num_queue_stats));
|
|
|
|
if (bnx2x_dma_alloc(sc, (sc->fw_stats_req_size + sc->fw_stats_data_size),
|
|
&sc->fw_stats_dma, "fw_stats",
|
|
RTE_CACHE_LINE_SIZE) != 0) {
|
|
bnx2x_free_fw_stats_mem(sc);
|
|
return -1;
|
|
}
|
|
|
|
/* set up the shortcuts */
|
|
|
|
sc->fw_stats_req = (struct bnx2x_fw_stats_req *)sc->fw_stats_dma.vaddr;
|
|
sc->fw_stats_req_mapping = sc->fw_stats_dma.paddr;
|
|
|
|
sc->fw_stats_data =
|
|
(struct bnx2x_fw_stats_data *)((uint8_t *) sc->fw_stats_dma.vaddr +
|
|
sc->fw_stats_req_size);
|
|
sc->fw_stats_data_mapping = (sc->fw_stats_dma.paddr +
|
|
sc->fw_stats_req_size);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Bits map:
|
|
* 0-7 - Engine0 load counter.
|
|
* 8-15 - Engine1 load counter.
|
|
* 16 - Engine0 RESET_IN_PROGRESS bit.
|
|
* 17 - Engine1 RESET_IN_PROGRESS bit.
|
|
* 18 - Engine0 ONE_IS_LOADED. Set when there is at least one active
|
|
* function on the engine
|
|
* 19 - Engine1 ONE_IS_LOADED.
|
|
* 20 - Chip reset flow bit. When set none-leader must wait for both engines
|
|
* leader to complete (check for both RESET_IN_PROGRESS bits and not
|
|
* for just the one belonging to its engine).
|
|
*/
|
|
#define BNX2X_RECOVERY_GLOB_REG MISC_REG_GENERIC_POR_1
|
|
#define BNX2X_PATH0_LOAD_CNT_MASK 0x000000ff
|
|
#define BNX2X_PATH0_LOAD_CNT_SHIFT 0
|
|
#define BNX2X_PATH1_LOAD_CNT_MASK 0x0000ff00
|
|
#define BNX2X_PATH1_LOAD_CNT_SHIFT 8
|
|
#define BNX2X_PATH0_RST_IN_PROG_BIT 0x00010000
|
|
#define BNX2X_PATH1_RST_IN_PROG_BIT 0x00020000
|
|
#define BNX2X_GLOBAL_RESET_BIT 0x00040000
|
|
|
|
/* set the GLOBAL_RESET bit, should be run under rtnl lock */
|
|
static void bnx2x_set_reset_global(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
|
|
val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
|
|
REG_WR(sc, BNX2X_RECOVERY_GLOB_REG, val | BNX2X_GLOBAL_RESET_BIT);
|
|
bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
|
|
}
|
|
|
|
/* clear the GLOBAL_RESET bit, should be run under rtnl lock */
|
|
static void bnx2x_clear_reset_global(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
|
|
val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
|
|
REG_WR(sc, BNX2X_RECOVERY_GLOB_REG, val & (~BNX2X_GLOBAL_RESET_BIT));
|
|
bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
|
|
}
|
|
|
|
/* checks the GLOBAL_RESET bit, should be run under rtnl lock */
|
|
static uint8_t bnx2x_reset_is_global(struct bnx2x_softc *sc)
|
|
{
|
|
return REG_RD(sc, BNX2X_RECOVERY_GLOB_REG) & BNX2X_GLOBAL_RESET_BIT;
|
|
}
|
|
|
|
/* clear RESET_IN_PROGRESS bit for the engine, should be run under rtnl lock */
|
|
static void bnx2x_set_reset_done(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
uint32_t bit = SC_PATH(sc) ? BNX2X_PATH1_RST_IN_PROG_BIT :
|
|
BNX2X_PATH0_RST_IN_PROG_BIT;
|
|
|
|
bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
|
|
|
|
val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
|
|
/* Clear the bit */
|
|
val &= ~bit;
|
|
REG_WR(sc, BNX2X_RECOVERY_GLOB_REG, val);
|
|
|
|
bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
|
|
}
|
|
|
|
/* set RESET_IN_PROGRESS for the engine, should be run under rtnl lock */
|
|
static void bnx2x_set_reset_in_progress(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
uint32_t bit = SC_PATH(sc) ? BNX2X_PATH1_RST_IN_PROG_BIT :
|
|
BNX2X_PATH0_RST_IN_PROG_BIT;
|
|
|
|
bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
|
|
|
|
val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
|
|
/* Set the bit */
|
|
val |= bit;
|
|
REG_WR(sc, BNX2X_RECOVERY_GLOB_REG, val);
|
|
|
|
bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
|
|
}
|
|
|
|
/* check RESET_IN_PROGRESS bit for an engine, should be run under rtnl lock */
|
|
static uint8_t bnx2x_reset_is_done(struct bnx2x_softc *sc, int engine)
|
|
{
|
|
uint32_t val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
|
|
uint32_t bit = engine ? BNX2X_PATH1_RST_IN_PROG_BIT :
|
|
BNX2X_PATH0_RST_IN_PROG_BIT;
|
|
|
|
/* return false if bit is set */
|
|
return (val & bit) ? FALSE : TRUE;
|
|
}
|
|
|
|
/* get the load status for an engine, should be run under rtnl lock */
|
|
static uint8_t bnx2x_get_load_status(struct bnx2x_softc *sc, int engine)
|
|
{
|
|
uint32_t mask = engine ? BNX2X_PATH1_LOAD_CNT_MASK :
|
|
BNX2X_PATH0_LOAD_CNT_MASK;
|
|
uint32_t shift = engine ? BNX2X_PATH1_LOAD_CNT_SHIFT :
|
|
BNX2X_PATH0_LOAD_CNT_SHIFT;
|
|
uint32_t val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
|
|
|
|
val = ((val & mask) >> shift);
|
|
|
|
return val != 0;
|
|
}
|
|
|
|
/* set pf load mark */
|
|
static void bnx2x_set_pf_load(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
uint32_t val1;
|
|
uint32_t mask = SC_PATH(sc) ? BNX2X_PATH1_LOAD_CNT_MASK :
|
|
BNX2X_PATH0_LOAD_CNT_MASK;
|
|
uint32_t shift = SC_PATH(sc) ? BNX2X_PATH1_LOAD_CNT_SHIFT :
|
|
BNX2X_PATH0_LOAD_CNT_SHIFT;
|
|
|
|
bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
|
|
|
|
PMD_INIT_FUNC_TRACE(sc);
|
|
|
|
val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
|
|
|
|
/* get the current counter value */
|
|
val1 = ((val & mask) >> shift);
|
|
|
|
/* set bit of this PF */
|
|
val1 |= (1 << SC_ABS_FUNC(sc));
|
|
|
|
/* clear the old value */
|
|
val &= ~mask;
|
|
|
|
/* set the new one */
|
|
val |= ((val1 << shift) & mask);
|
|
|
|
REG_WR(sc, BNX2X_RECOVERY_GLOB_REG, val);
|
|
|
|
bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
|
|
}
|
|
|
|
/* clear pf load mark */
|
|
static uint8_t bnx2x_clear_pf_load(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t val1, val;
|
|
uint32_t mask = SC_PATH(sc) ? BNX2X_PATH1_LOAD_CNT_MASK :
|
|
BNX2X_PATH0_LOAD_CNT_MASK;
|
|
uint32_t shift = SC_PATH(sc) ? BNX2X_PATH1_LOAD_CNT_SHIFT :
|
|
BNX2X_PATH0_LOAD_CNT_SHIFT;
|
|
|
|
bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
|
|
val = REG_RD(sc, BNX2X_RECOVERY_GLOB_REG);
|
|
|
|
/* get the current counter value */
|
|
val1 = (val & mask) >> shift;
|
|
|
|
/* clear bit of that PF */
|
|
val1 &= ~(1 << SC_ABS_FUNC(sc));
|
|
|
|
/* clear the old value */
|
|
val &= ~mask;
|
|
|
|
/* set the new one */
|
|
val |= ((val1 << shift) & mask);
|
|
|
|
REG_WR(sc, BNX2X_RECOVERY_GLOB_REG, val);
|
|
bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RECOVERY_REG);
|
|
return val1 != 0;
|
|
}
|
|
|
|
/* send load requrest to mcp and analyze response */
|
|
static int bnx2x_nic_load_request(struct bnx2x_softc *sc, uint32_t * load_code)
|
|
{
|
|
PMD_INIT_FUNC_TRACE(sc);
|
|
|
|
/* init fw_seq */
|
|
sc->fw_seq =
|
|
(SHMEM_RD(sc, func_mb[SC_FW_MB_IDX(sc)].drv_mb_header) &
|
|
DRV_MSG_SEQ_NUMBER_MASK);
|
|
|
|
PMD_DRV_LOG(DEBUG, sc, "initial fw_seq 0x%04x", sc->fw_seq);
|
|
|
|
#ifdef BNX2X_PULSE
|
|
/* get the current FW pulse sequence */
|
|
sc->fw_drv_pulse_wr_seq =
|
|
(SHMEM_RD(sc, func_mb[SC_FW_MB_IDX(sc)].drv_pulse_mb) &
|
|
DRV_PULSE_SEQ_MASK);
|
|
#else
|
|
/* set ALWAYS_ALIVE bit in shmem */
|
|
sc->fw_drv_pulse_wr_seq |= DRV_PULSE_ALWAYS_ALIVE;
|
|
bnx2x_drv_pulse(sc);
|
|
#endif
|
|
|
|
/* load request */
|
|
(*load_code) = bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_REQ,
|
|
DRV_MSG_CODE_LOAD_REQ_WITH_LFA);
|
|
|
|
/* if the MCP fails to respond we must abort */
|
|
if (!(*load_code)) {
|
|
PMD_DRV_LOG(NOTICE, sc, "MCP response failure!");
|
|
return -1;
|
|
}
|
|
|
|
/* if MCP refused then must abort */
|
|
if ((*load_code) == FW_MSG_CODE_DRV_LOAD_REFUSED) {
|
|
PMD_DRV_LOG(NOTICE, sc, "MCP refused load request");
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Check whether another PF has already loaded FW to chip. In virtualized
|
|
* environments a pf from anoth VM may have already initialized the device
|
|
* including loading FW.
|
|
*/
|
|
static int bnx2x_nic_load_analyze_req(struct bnx2x_softc *sc, uint32_t load_code)
|
|
{
|
|
uint32_t my_fw, loaded_fw;
|
|
|
|
/* is another pf loaded on this engine? */
|
|
if ((load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) &&
|
|
(load_code != FW_MSG_CODE_DRV_LOAD_COMMON)) {
|
|
/* build my FW version dword */
|
|
my_fw = (BNX2X_5710_FW_MAJOR_VERSION +
|
|
(BNX2X_5710_FW_MINOR_VERSION << 8) +
|
|
(BNX2X_5710_FW_REVISION_VERSION << 16) +
|
|
(BNX2X_5710_FW_ENGINEERING_VERSION << 24));
|
|
|
|
/* read loaded FW from chip */
|
|
loaded_fw = REG_RD(sc, XSEM_REG_PRAM);
|
|
PMD_DRV_LOG(DEBUG, sc, "loaded FW 0x%08x / my FW 0x%08x",
|
|
loaded_fw, my_fw);
|
|
|
|
/* abort nic load if version mismatch */
|
|
if (my_fw != loaded_fw) {
|
|
PMD_DRV_LOG(NOTICE, sc,
|
|
"FW 0x%08x already loaded (mine is 0x%08x)",
|
|
loaded_fw, my_fw);
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* mark PMF if applicable */
|
|
static void bnx2x_nic_load_pmf(struct bnx2x_softc *sc, uint32_t load_code)
|
|
{
|
|
uint32_t ncsi_oem_data_addr;
|
|
|
|
PMD_INIT_FUNC_TRACE(sc);
|
|
|
|
if ((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) ||
|
|
(load_code == FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) ||
|
|
(load_code == FW_MSG_CODE_DRV_LOAD_PORT)) {
|
|
/*
|
|
* Barrier here for ordering between the writing to sc->port.pmf here
|
|
* and reading it from the periodic task.
|
|
*/
|
|
sc->port.pmf = 1;
|
|
mb();
|
|
} else {
|
|
sc->port.pmf = 0;
|
|
}
|
|
|
|
PMD_DRV_LOG(DEBUG, sc, "pmf %d", sc->port.pmf);
|
|
|
|
if (load_code == FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) {
|
|
if (SHMEM2_HAS(sc, ncsi_oem_data_addr)) {
|
|
ncsi_oem_data_addr = SHMEM2_RD(sc, ncsi_oem_data_addr);
|
|
if (ncsi_oem_data_addr) {
|
|
REG_WR(sc,
|
|
(ncsi_oem_data_addr +
|
|
offsetof(struct glob_ncsi_oem_data,
|
|
driver_version)), 0);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static void bnx2x_read_mf_cfg(struct bnx2x_softc *sc)
|
|
{
|
|
int n = (CHIP_IS_MODE_4_PORT(sc) ? 2 : 1);
|
|
int abs_func;
|
|
int vn;
|
|
|
|
if (BNX2X_NOMCP(sc)) {
|
|
return; /* what should be the default bvalue in this case */
|
|
}
|
|
|
|
/*
|
|
* The formula for computing the absolute function number is...
|
|
* For 2 port configuration (4 functions per port):
|
|
* abs_func = 2 * vn + SC_PORT + SC_PATH
|
|
* For 4 port configuration (2 functions per port):
|
|
* abs_func = 4 * vn + 2 * SC_PORT + SC_PATH
|
|
*/
|
|
for (vn = VN_0; vn < SC_MAX_VN_NUM(sc); vn++) {
|
|
abs_func = (n * (2 * vn + SC_PORT(sc)) + SC_PATH(sc));
|
|
if (abs_func >= E1H_FUNC_MAX) {
|
|
break;
|
|
}
|
|
sc->devinfo.mf_info.mf_config[vn] =
|
|
MFCFG_RD(sc, func_mf_config[abs_func].config);
|
|
}
|
|
|
|
if (sc->devinfo.mf_info.mf_config[SC_VN(sc)] &
|
|
FUNC_MF_CFG_FUNC_DISABLED) {
|
|
PMD_DRV_LOG(DEBUG, sc, "mf_cfg function disabled");
|
|
sc->flags |= BNX2X_MF_FUNC_DIS;
|
|
} else {
|
|
PMD_DRV_LOG(DEBUG, sc, "mf_cfg function enabled");
|
|
sc->flags &= ~BNX2X_MF_FUNC_DIS;
|
|
}
|
|
}
|
|
|
|
/* acquire split MCP access lock register */
|
|
static int bnx2x_acquire_alr(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t j, val;
|
|
|
|
for (j = 0; j < 1000; j++) {
|
|
val = (1UL << 31);
|
|
REG_WR(sc, GRCBASE_MCP + 0x9c, val);
|
|
val = REG_RD(sc, GRCBASE_MCP + 0x9c);
|
|
if (val & (1L << 31))
|
|
break;
|
|
|
|
DELAY(5000);
|
|
}
|
|
|
|
if (!(val & (1L << 31))) {
|
|
PMD_DRV_LOG(NOTICE, sc, "Cannot acquire MCP access lock register");
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* release split MCP access lock register */
|
|
static void bnx2x_release_alr(struct bnx2x_softc *sc)
|
|
{
|
|
REG_WR(sc, GRCBASE_MCP + 0x9c, 0);
|
|
}
|
|
|
|
static void bnx2x_fan_failure(struct bnx2x_softc *sc)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
uint32_t ext_phy_config;
|
|
|
|
/* mark the failure */
|
|
ext_phy_config =
|
|
SHMEM_RD(sc, dev_info.port_hw_config[port].external_phy_config);
|
|
|
|
ext_phy_config &= ~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK;
|
|
ext_phy_config |= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE;
|
|
SHMEM_WR(sc, dev_info.port_hw_config[port].external_phy_config,
|
|
ext_phy_config);
|
|
|
|
/* log the failure */
|
|
PMD_DRV_LOG(INFO, sc,
|
|
"Fan Failure has caused the driver to shutdown "
|
|
"the card to prevent permanent damage. "
|
|
"Please contact OEM Support for assistance");
|
|
|
|
rte_panic("Schedule task to handle fan failure");
|
|
}
|
|
|
|
/* this function is called upon a link interrupt */
|
|
static void bnx2x_link_attn(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t pause_enabled = 0;
|
|
struct host_port_stats *pstats;
|
|
int cmng_fns;
|
|
|
|
/* Make sure that we are synced with the current statistics */
|
|
bnx2x_stats_handle(sc, STATS_EVENT_STOP);
|
|
|
|
elink_link_update(&sc->link_params, &sc->link_vars);
|
|
|
|
if (sc->link_vars.link_up) {
|
|
|
|
/* dropless flow control */
|
|
if (sc->dropless_fc) {
|
|
pause_enabled = 0;
|
|
|
|
if (sc->link_vars.flow_ctrl & ELINK_FLOW_CTRL_TX) {
|
|
pause_enabled = 1;
|
|
}
|
|
|
|
REG_WR(sc,
|
|
(BAR_USTRORM_INTMEM +
|
|
USTORM_ETH_PAUSE_ENABLED_OFFSET(SC_PORT(sc))),
|
|
pause_enabled);
|
|
}
|
|
|
|
if (sc->link_vars.mac_type != ELINK_MAC_TYPE_EMAC) {
|
|
pstats = BNX2X_SP(sc, port_stats);
|
|
/* reset old mac stats */
|
|
memset(&(pstats->mac_stx[0]), 0,
|
|
sizeof(struct mac_stx));
|
|
}
|
|
|
|
if (sc->state == BNX2X_STATE_OPEN) {
|
|
bnx2x_stats_handle(sc, STATS_EVENT_LINK_UP);
|
|
}
|
|
}
|
|
|
|
if (sc->link_vars.link_up && sc->link_vars.line_speed) {
|
|
cmng_fns = bnx2x_get_cmng_fns_mode(sc);
|
|
|
|
if (cmng_fns != CMNG_FNS_NONE) {
|
|
bnx2x_cmng_fns_init(sc, FALSE, cmng_fns);
|
|
storm_memset_cmng(sc, &sc->cmng, SC_PORT(sc));
|
|
}
|
|
}
|
|
|
|
bnx2x_link_report_locked(sc);
|
|
|
|
if (IS_MF(sc)) {
|
|
bnx2x_link_sync_notify(sc);
|
|
}
|
|
}
|
|
|
|
static void bnx2x_attn_int_asserted(struct bnx2x_softc *sc, uint32_t asserted)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
uint32_t aeu_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
|
|
MISC_REG_AEU_MASK_ATTN_FUNC_0;
|
|
uint32_t nig_int_mask_addr = port ? NIG_REG_MASK_INTERRUPT_PORT1 :
|
|
NIG_REG_MASK_INTERRUPT_PORT0;
|
|
uint32_t aeu_mask;
|
|
uint32_t nig_mask = 0;
|
|
uint32_t reg_addr;
|
|
uint32_t igu_acked;
|
|
uint32_t cnt;
|
|
|
|
if (sc->attn_state & asserted) {
|
|
PMD_DRV_LOG(ERR, sc, "IGU ERROR attn=0x%08x", asserted);
|
|
}
|
|
|
|
bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
|
|
|
|
aeu_mask = REG_RD(sc, aeu_addr);
|
|
|
|
aeu_mask &= ~(asserted & 0x3ff);
|
|
|
|
REG_WR(sc, aeu_addr, aeu_mask);
|
|
|
|
bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
|
|
|
|
sc->attn_state |= asserted;
|
|
|
|
if (asserted & ATTN_HARD_WIRED_MASK) {
|
|
if (asserted & ATTN_NIG_FOR_FUNC) {
|
|
|
|
bnx2x_acquire_phy_lock(sc);
|
|
/* save nig interrupt mask */
|
|
nig_mask = REG_RD(sc, nig_int_mask_addr);
|
|
|
|
/* If nig_mask is not set, no need to call the update function */
|
|
if (nig_mask) {
|
|
REG_WR(sc, nig_int_mask_addr, 0);
|
|
|
|
bnx2x_link_attn(sc);
|
|
}
|
|
|
|
/* handle unicore attn? */
|
|
}
|
|
|
|
if (asserted & ATTN_SW_TIMER_4_FUNC) {
|
|
PMD_DRV_LOG(DEBUG, sc, "ATTN_SW_TIMER_4_FUNC!");
|
|
}
|
|
|
|
if (asserted & GPIO_2_FUNC) {
|
|
PMD_DRV_LOG(DEBUG, sc, "GPIO_2_FUNC!");
|
|
}
|
|
|
|
if (asserted & GPIO_3_FUNC) {
|
|
PMD_DRV_LOG(DEBUG, sc, "GPIO_3_FUNC!");
|
|
}
|
|
|
|
if (asserted & GPIO_4_FUNC) {
|
|
PMD_DRV_LOG(DEBUG, sc, "GPIO_4_FUNC!");
|
|
}
|
|
|
|
if (port == 0) {
|
|
if (asserted & ATTN_GENERAL_ATTN_1) {
|
|
PMD_DRV_LOG(DEBUG, sc, "ATTN_GENERAL_ATTN_1!");
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_1, 0x0);
|
|
}
|
|
if (asserted & ATTN_GENERAL_ATTN_2) {
|
|
PMD_DRV_LOG(DEBUG, sc, "ATTN_GENERAL_ATTN_2!");
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_2, 0x0);
|
|
}
|
|
if (asserted & ATTN_GENERAL_ATTN_3) {
|
|
PMD_DRV_LOG(DEBUG, sc, "ATTN_GENERAL_ATTN_3!");
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_3, 0x0);
|
|
}
|
|
} else {
|
|
if (asserted & ATTN_GENERAL_ATTN_4) {
|
|
PMD_DRV_LOG(DEBUG, sc, "ATTN_GENERAL_ATTN_4!");
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_4, 0x0);
|
|
}
|
|
if (asserted & ATTN_GENERAL_ATTN_5) {
|
|
PMD_DRV_LOG(DEBUG, sc, "ATTN_GENERAL_ATTN_5!");
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_5, 0x0);
|
|
}
|
|
if (asserted & ATTN_GENERAL_ATTN_6) {
|
|
PMD_DRV_LOG(DEBUG, sc, "ATTN_GENERAL_ATTN_6!");
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_6, 0x0);
|
|
}
|
|
}
|
|
}
|
|
/* hardwired */
|
|
if (sc->devinfo.int_block == INT_BLOCK_HC) {
|
|
reg_addr =
|
|
(HC_REG_COMMAND_REG + port * 32 +
|
|
COMMAND_REG_ATTN_BITS_SET);
|
|
} else {
|
|
reg_addr = (BAR_IGU_INTMEM + IGU_CMD_ATTN_BIT_SET_UPPER * 8);
|
|
}
|
|
|
|
PMD_DRV_LOG(DEBUG, sc, "about to mask 0x%08x at %s addr 0x%08x",
|
|
asserted,
|
|
(sc->devinfo.int_block == INT_BLOCK_HC) ? "HC" : "IGU",
|
|
reg_addr);
|
|
REG_WR(sc, reg_addr, asserted);
|
|
|
|
/* now set back the mask */
|
|
if (asserted & ATTN_NIG_FOR_FUNC) {
|
|
/*
|
|
* Verify that IGU ack through BAR was written before restoring
|
|
* NIG mask. This loop should exit after 2-3 iterations max.
|
|
*/
|
|
if (sc->devinfo.int_block != INT_BLOCK_HC) {
|
|
cnt = 0;
|
|
|
|
do {
|
|
igu_acked =
|
|
REG_RD(sc, IGU_REG_ATTENTION_ACK_BITS);
|
|
} while (((igu_acked & ATTN_NIG_FOR_FUNC) == 0)
|
|
&& (++cnt < MAX_IGU_ATTN_ACK_TO));
|
|
|
|
if (!igu_acked) {
|
|
PMD_DRV_LOG(ERR, sc,
|
|
"Failed to verify IGU ack on time");
|
|
}
|
|
|
|
mb();
|
|
}
|
|
|
|
REG_WR(sc, nig_int_mask_addr, nig_mask);
|
|
|
|
bnx2x_release_phy_lock(sc);
|
|
}
|
|
}
|
|
|
|
static void
|
|
bnx2x_print_next_block(__rte_unused struct bnx2x_softc *sc, __rte_unused int idx,
|
|
__rte_unused const char *blk)
|
|
{
|
|
PMD_DRV_LOG(INFO, sc, "%s%s", idx ? ", " : "", blk);
|
|
}
|
|
|
|
static int
|
|
bnx2x_check_blocks_with_parity0(struct bnx2x_softc *sc, uint32_t sig, int par_num,
|
|
uint8_t print)
|
|
{
|
|
uint32_t cur_bit = 0;
|
|
int i = 0;
|
|
|
|
for (i = 0; sig; i++) {
|
|
cur_bit = ((uint32_t) 0x1 << i);
|
|
if (sig & cur_bit) {
|
|
switch (cur_bit) {
|
|
case AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"BRB");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"PARSER");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"TSDM");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"SEARCHER");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"TCM");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"TSEMI");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"XPB");
|
|
break;
|
|
}
|
|
|
|
/* Clear the bit */
|
|
sig &= ~cur_bit;
|
|
}
|
|
}
|
|
|
|
return par_num;
|
|
}
|
|
|
|
static int
|
|
bnx2x_check_blocks_with_parity1(struct bnx2x_softc *sc, uint32_t sig, int par_num,
|
|
uint8_t * global, uint8_t print)
|
|
{
|
|
int i = 0;
|
|
uint32_t cur_bit = 0;
|
|
for (i = 0; sig; i++) {
|
|
cur_bit = ((uint32_t) 0x1 << i);
|
|
if (sig & cur_bit) {
|
|
switch (cur_bit) {
|
|
case AEU_INPUTS_ATTN_BITS_PBF_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"PBF");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"QM");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_TIMERS_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"TM");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"XSDM");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_XCM_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"XCM");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"XSEMI");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"DOORBELLQ");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_NIG_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"NIG");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"VAUX PCI CORE");
|
|
*global = TRUE;
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"DEBUG");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"USDM");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_UCM_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"UCM");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"USEMI");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"UPB");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"CSDM");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"CCM");
|
|
break;
|
|
}
|
|
|
|
/* Clear the bit */
|
|
sig &= ~cur_bit;
|
|
}
|
|
}
|
|
|
|
return par_num;
|
|
}
|
|
|
|
static int
|
|
bnx2x_check_blocks_with_parity2(struct bnx2x_softc *sc, uint32_t sig, int par_num,
|
|
uint8_t print)
|
|
{
|
|
uint32_t cur_bit = 0;
|
|
int i = 0;
|
|
|
|
for (i = 0; sig; i++) {
|
|
cur_bit = ((uint32_t) 0x1 << i);
|
|
if (sig & cur_bit) {
|
|
switch (cur_bit) {
|
|
case AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"CSEMI");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"PXP");
|
|
break;
|
|
case AEU_IN_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"PXPPCICLOCKCLIENT");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"CFC");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"CDU");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"DMAE");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"IGU");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"MISC");
|
|
break;
|
|
}
|
|
|
|
/* Clear the bit */
|
|
sig &= ~cur_bit;
|
|
}
|
|
}
|
|
|
|
return par_num;
|
|
}
|
|
|
|
static int
|
|
bnx2x_check_blocks_with_parity3(struct bnx2x_softc *sc, uint32_t sig, int par_num,
|
|
uint8_t * global, uint8_t print)
|
|
{
|
|
uint32_t cur_bit = 0;
|
|
int i = 0;
|
|
|
|
for (i = 0; sig; i++) {
|
|
cur_bit = ((uint32_t) 0x1 << i);
|
|
if (sig & cur_bit) {
|
|
switch (cur_bit) {
|
|
case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"MCP ROM");
|
|
*global = TRUE;
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"MCP UMP RX");
|
|
*global = TRUE;
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"MCP UMP TX");
|
|
*global = TRUE;
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"MCP SCPAD");
|
|
*global = TRUE;
|
|
break;
|
|
}
|
|
|
|
/* Clear the bit */
|
|
sig &= ~cur_bit;
|
|
}
|
|
}
|
|
|
|
return par_num;
|
|
}
|
|
|
|
static int
|
|
bnx2x_check_blocks_with_parity4(struct bnx2x_softc *sc, uint32_t sig, int par_num,
|
|
uint8_t print)
|
|
{
|
|
uint32_t cur_bit = 0;
|
|
int i = 0;
|
|
|
|
for (i = 0; sig; i++) {
|
|
cur_bit = ((uint32_t) 0x1 << i);
|
|
if (sig & cur_bit) {
|
|
switch (cur_bit) {
|
|
case AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"PGLUE_B");
|
|
break;
|
|
case AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR:
|
|
if (print)
|
|
bnx2x_print_next_block(sc, par_num++,
|
|
"ATC");
|
|
break;
|
|
}
|
|
|
|
/* Clear the bit */
|
|
sig &= ~cur_bit;
|
|
}
|
|
}
|
|
|
|
return par_num;
|
|
}
|
|
|
|
static uint8_t
|
|
bnx2x_parity_attn(struct bnx2x_softc *sc, uint8_t * global, uint8_t print,
|
|
uint32_t * sig)
|
|
{
|
|
int par_num = 0;
|
|
|
|
if ((sig[0] & HW_PRTY_ASSERT_SET_0) ||
|
|
(sig[1] & HW_PRTY_ASSERT_SET_1) ||
|
|
(sig[2] & HW_PRTY_ASSERT_SET_2) ||
|
|
(sig[3] & HW_PRTY_ASSERT_SET_3) ||
|
|
(sig[4] & HW_PRTY_ASSERT_SET_4)) {
|
|
PMD_DRV_LOG(ERR, sc,
|
|
"Parity error: HW block parity attention:"
|
|
"[0]:0x%08x [1]:0x%08x [2]:0x%08x [3]:0x%08x [4]:0x%08x",
|
|
(uint32_t) (sig[0] & HW_PRTY_ASSERT_SET_0),
|
|
(uint32_t) (sig[1] & HW_PRTY_ASSERT_SET_1),
|
|
(uint32_t) (sig[2] & HW_PRTY_ASSERT_SET_2),
|
|
(uint32_t) (sig[3] & HW_PRTY_ASSERT_SET_3),
|
|
(uint32_t) (sig[4] & HW_PRTY_ASSERT_SET_4));
|
|
|
|
if (print)
|
|
PMD_DRV_LOG(INFO, sc, "Parity errors detected in blocks: ");
|
|
|
|
par_num =
|
|
bnx2x_check_blocks_with_parity0(sc, sig[0] &
|
|
HW_PRTY_ASSERT_SET_0,
|
|
par_num, print);
|
|
par_num =
|
|
bnx2x_check_blocks_with_parity1(sc, sig[1] &
|
|
HW_PRTY_ASSERT_SET_1,
|
|
par_num, global, print);
|
|
par_num =
|
|
bnx2x_check_blocks_with_parity2(sc, sig[2] &
|
|
HW_PRTY_ASSERT_SET_2,
|
|
par_num, print);
|
|
par_num =
|
|
bnx2x_check_blocks_with_parity3(sc, sig[3] &
|
|
HW_PRTY_ASSERT_SET_3,
|
|
par_num, global, print);
|
|
par_num =
|
|
bnx2x_check_blocks_with_parity4(sc, sig[4] &
|
|
HW_PRTY_ASSERT_SET_4,
|
|
par_num, print);
|
|
|
|
if (print)
|
|
PMD_DRV_LOG(INFO, sc, "");
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
return FALSE;
|
|
}
|
|
|
|
static uint8_t
|
|
bnx2x_chk_parity_attn(struct bnx2x_softc *sc, uint8_t * global, uint8_t print)
|
|
{
|
|
struct attn_route attn = { {0} };
|
|
int port = SC_PORT(sc);
|
|
|
|
attn.sig[0] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + port * 4);
|
|
attn.sig[1] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 + port * 4);
|
|
attn.sig[2] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 + port * 4);
|
|
attn.sig[3] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 + port * 4);
|
|
|
|
if (!CHIP_IS_E1x(sc))
|
|
attn.sig[4] =
|
|
REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 + port * 4);
|
|
|
|
return bnx2x_parity_attn(sc, global, print, attn.sig);
|
|
}
|
|
|
|
static void bnx2x_attn_int_deasserted4(struct bnx2x_softc *sc, uint32_t attn)
|
|
{
|
|
uint32_t val;
|
|
|
|
if (attn & AEU_INPUTS_ATTN_BITS_PGLUE_HW_INTERRUPT) {
|
|
val = REG_RD(sc, PGLUE_B_REG_PGLUE_B_INT_STS_CLR);
|
|
PMD_DRV_LOG(INFO, sc, "ERROR: PGLUE hw attention 0x%08x", val);
|
|
if (val & PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR)
|
|
PMD_DRV_LOG(INFO, sc,
|
|
"ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR");
|
|
if (val & PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR)
|
|
PMD_DRV_LOG(INFO, sc,
|
|
"ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR");
|
|
if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN)
|
|
PMD_DRV_LOG(INFO, sc,
|
|
"ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN");
|
|
if (val & PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN)
|
|
PMD_DRV_LOG(INFO, sc,
|
|
"ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN");
|
|
if (val &
|
|
PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN)
|
|
PMD_DRV_LOG(INFO, sc,
|
|
"ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN");
|
|
if (val &
|
|
PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN)
|
|
PMD_DRV_LOG(INFO, sc,
|
|
"ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN");
|
|
if (val & PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN)
|
|
PMD_DRV_LOG(INFO, sc,
|
|
"ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN");
|
|
if (val & PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN)
|
|
PMD_DRV_LOG(INFO, sc,
|
|
"ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN");
|
|
if (val & PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW)
|
|
PMD_DRV_LOG(INFO, sc,
|
|
"ERROR: PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW");
|
|
}
|
|
|
|
if (attn & AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT) {
|
|
val = REG_RD(sc, ATC_REG_ATC_INT_STS_CLR);
|
|
PMD_DRV_LOG(INFO, sc, "ERROR: ATC hw attention 0x%08x", val);
|
|
if (val & ATC_ATC_INT_STS_REG_ADDRESS_ERROR)
|
|
PMD_DRV_LOG(INFO, sc,
|
|
"ERROR: ATC_ATC_INT_STS_REG_ADDRESS_ERROR");
|
|
if (val & ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND)
|
|
PMD_DRV_LOG(INFO, sc,
|
|
"ERROR: ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND");
|
|
if (val & ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS)
|
|
PMD_DRV_LOG(INFO, sc,
|
|
"ERROR: ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS");
|
|
if (val & ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT)
|
|
PMD_DRV_LOG(INFO, sc,
|
|
"ERROR: ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT");
|
|
if (val & ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR)
|
|
PMD_DRV_LOG(INFO, sc,
|
|
"ERROR: ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR");
|
|
if (val & ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU)
|
|
PMD_DRV_LOG(INFO, sc,
|
|
"ERROR: ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU");
|
|
}
|
|
|
|
if (attn & (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR |
|
|
AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR)) {
|
|
PMD_DRV_LOG(INFO, sc,
|
|
"ERROR: FATAL parity attention set4 0x%08x",
|
|
(uint32_t) (attn &
|
|
(AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR
|
|
|
|
|
AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR)));
|
|
}
|
|
}
|
|
|
|
static void bnx2x_e1h_disable(struct bnx2x_softc *sc)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
|
|
REG_WR(sc, NIG_REG_LLH0_FUNC_EN + port * 8, 0);
|
|
}
|
|
|
|
static void bnx2x_e1h_enable(struct bnx2x_softc *sc)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
|
|
REG_WR(sc, NIG_REG_LLH0_FUNC_EN + port * 8, 1);
|
|
}
|
|
|
|
/*
|
|
* called due to MCP event (on pmf):
|
|
* reread new bandwidth configuration
|
|
* configure FW
|
|
* notify others function about the change
|
|
*/
|
|
static void bnx2x_config_mf_bw(struct bnx2x_softc *sc)
|
|
{
|
|
if (sc->link_vars.link_up) {
|
|
bnx2x_cmng_fns_init(sc, TRUE, CMNG_FNS_MINMAX);
|
|
bnx2x_link_sync_notify(sc);
|
|
}
|
|
|
|
storm_memset_cmng(sc, &sc->cmng, SC_PORT(sc));
|
|
}
|
|
|
|
static void bnx2x_set_mf_bw(struct bnx2x_softc *sc)
|
|
{
|
|
bnx2x_config_mf_bw(sc);
|
|
bnx2x_fw_command(sc, DRV_MSG_CODE_SET_MF_BW_ACK, 0);
|
|
}
|
|
|
|
static void bnx2x_handle_eee_event(struct bnx2x_softc *sc)
|
|
{
|
|
bnx2x_fw_command(sc, DRV_MSG_CODE_EEE_RESULTS_ACK, 0);
|
|
}
|
|
|
|
#define DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED 3
|
|
|
|
static void bnx2x_drv_info_ether_stat(struct bnx2x_softc *sc)
|
|
{
|
|
struct eth_stats_info *ether_stat = &sc->sp->drv_info_to_mcp.ether_stat;
|
|
|
|
strncpy(ether_stat->version, BNX2X_DRIVER_VERSION,
|
|
ETH_STAT_INFO_VERSION_LEN);
|
|
|
|
sc->sp_objs[0].mac_obj.get_n_elements(sc, &sc->sp_objs[0].mac_obj,
|
|
DRV_INFO_ETH_STAT_NUM_MACS_REQUIRED,
|
|
ether_stat->mac_local + MAC_PAD,
|
|
MAC_PAD, ETH_ALEN);
|
|
|
|
ether_stat->mtu_size = sc->mtu;
|
|
|
|
ether_stat->feature_flags |= FEATURE_ETH_CHKSUM_OFFLOAD_MASK;
|
|
ether_stat->promiscuous_mode = 0; // (flags & PROMISC) ? 1 : 0;
|
|
|
|
ether_stat->txq_size = sc->tx_ring_size;
|
|
ether_stat->rxq_size = sc->rx_ring_size;
|
|
}
|
|
|
|
static void bnx2x_handle_drv_info_req(struct bnx2x_softc *sc)
|
|
{
|
|
enum drv_info_opcode op_code;
|
|
uint32_t drv_info_ctl = SHMEM2_RD(sc, drv_info_control);
|
|
|
|
/* if drv_info version supported by MFW doesn't match - send NACK */
|
|
if ((drv_info_ctl & DRV_INFO_CONTROL_VER_MASK) != DRV_INFO_CUR_VER) {
|
|
bnx2x_fw_command(sc, DRV_MSG_CODE_DRV_INFO_NACK, 0);
|
|
return;
|
|
}
|
|
|
|
op_code = ((drv_info_ctl & DRV_INFO_CONTROL_OP_CODE_MASK) >>
|
|
DRV_INFO_CONTROL_OP_CODE_SHIFT);
|
|
|
|
memset(&sc->sp->drv_info_to_mcp, 0, sizeof(union drv_info_to_mcp));
|
|
|
|
switch (op_code) {
|
|
case ETH_STATS_OPCODE:
|
|
bnx2x_drv_info_ether_stat(sc);
|
|
break;
|
|
case FCOE_STATS_OPCODE:
|
|
case ISCSI_STATS_OPCODE:
|
|
default:
|
|
/* if op code isn't supported - send NACK */
|
|
bnx2x_fw_command(sc, DRV_MSG_CODE_DRV_INFO_NACK, 0);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* If we got drv_info attn from MFW then these fields are defined in
|
|
* shmem2 for sure
|
|
*/
|
|
SHMEM2_WR(sc, drv_info_host_addr_lo,
|
|
U64_LO(BNX2X_SP_MAPPING(sc, drv_info_to_mcp)));
|
|
SHMEM2_WR(sc, drv_info_host_addr_hi,
|
|
U64_HI(BNX2X_SP_MAPPING(sc, drv_info_to_mcp)));
|
|
|
|
bnx2x_fw_command(sc, DRV_MSG_CODE_DRV_INFO_ACK, 0);
|
|
}
|
|
|
|
static void bnx2x_dcc_event(struct bnx2x_softc *sc, uint32_t dcc_event)
|
|
{
|
|
if (dcc_event & DRV_STATUS_DCC_DISABLE_ENABLE_PF) {
|
|
/*
|
|
* This is the only place besides the function initialization
|
|
* where the sc->flags can change so it is done without any
|
|
* locks
|
|
*/
|
|
if (sc->devinfo.
|
|
mf_info.mf_config[SC_VN(sc)] & FUNC_MF_CFG_FUNC_DISABLED) {
|
|
PMD_DRV_LOG(DEBUG, sc, "mf_cfg function disabled");
|
|
sc->flags |= BNX2X_MF_FUNC_DIS;
|
|
bnx2x_e1h_disable(sc);
|
|
} else {
|
|
PMD_DRV_LOG(DEBUG, sc, "mf_cfg function enabled");
|
|
sc->flags &= ~BNX2X_MF_FUNC_DIS;
|
|
bnx2x_e1h_enable(sc);
|
|
}
|
|
dcc_event &= ~DRV_STATUS_DCC_DISABLE_ENABLE_PF;
|
|
}
|
|
|
|
if (dcc_event & DRV_STATUS_DCC_BANDWIDTH_ALLOCATION) {
|
|
bnx2x_config_mf_bw(sc);
|
|
dcc_event &= ~DRV_STATUS_DCC_BANDWIDTH_ALLOCATION;
|
|
}
|
|
|
|
/* Report results to MCP */
|
|
if (dcc_event)
|
|
bnx2x_fw_command(sc, DRV_MSG_CODE_DCC_FAILURE, 0);
|
|
else
|
|
bnx2x_fw_command(sc, DRV_MSG_CODE_DCC_OK, 0);
|
|
}
|
|
|
|
static void bnx2x_pmf_update(struct bnx2x_softc *sc)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
uint32_t val;
|
|
|
|
sc->port.pmf = 1;
|
|
|
|
/*
|
|
* We need the mb() to ensure the ordering between the writing to
|
|
* sc->port.pmf here and reading it from the bnx2x_periodic_task().
|
|
*/
|
|
mb();
|
|
|
|
/* enable nig attention */
|
|
val = (0xff0f | (1 << (SC_VN(sc) + 4)));
|
|
if (sc->devinfo.int_block == INT_BLOCK_HC) {
|
|
REG_WR(sc, HC_REG_TRAILING_EDGE_0 + port * 8, val);
|
|
REG_WR(sc, HC_REG_LEADING_EDGE_0 + port * 8, val);
|
|
} else if (!CHIP_IS_E1x(sc)) {
|
|
REG_WR(sc, IGU_REG_TRAILING_EDGE_LATCH, val);
|
|
REG_WR(sc, IGU_REG_LEADING_EDGE_LATCH, val);
|
|
}
|
|
|
|
bnx2x_stats_handle(sc, STATS_EVENT_PMF);
|
|
}
|
|
|
|
static int bnx2x_mc_assert(struct bnx2x_softc *sc)
|
|
{
|
|
char last_idx;
|
|
int i, rc = 0;
|
|
__rte_unused uint32_t row0, row1, row2, row3;
|
|
|
|
/* XSTORM */
|
|
last_idx =
|
|
REG_RD8(sc, BAR_XSTRORM_INTMEM + XSTORM_ASSERT_LIST_INDEX_OFFSET);
|
|
if (last_idx)
|
|
PMD_DRV_LOG(ERR, sc, "XSTORM_ASSERT_LIST_INDEX 0x%x", last_idx);
|
|
|
|
/* print the asserts */
|
|
for (i = 0; i < STORM_ASSERT_ARRAY_SIZE; i++) {
|
|
|
|
row0 =
|
|
REG_RD(sc,
|
|
BAR_XSTRORM_INTMEM + XSTORM_ASSERT_LIST_OFFSET(i));
|
|
row1 =
|
|
REG_RD(sc,
|
|
BAR_XSTRORM_INTMEM + XSTORM_ASSERT_LIST_OFFSET(i) +
|
|
4);
|
|
row2 =
|
|
REG_RD(sc,
|
|
BAR_XSTRORM_INTMEM + XSTORM_ASSERT_LIST_OFFSET(i) +
|
|
8);
|
|
row3 =
|
|
REG_RD(sc,
|
|
BAR_XSTRORM_INTMEM + XSTORM_ASSERT_LIST_OFFSET(i) +
|
|
12);
|
|
|
|
if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
|
|
PMD_DRV_LOG(ERR, sc,
|
|
"XSTORM_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x",
|
|
i, row3, row2, row1, row0);
|
|
rc++;
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* TSTORM */
|
|
last_idx =
|
|
REG_RD8(sc, BAR_TSTRORM_INTMEM + TSTORM_ASSERT_LIST_INDEX_OFFSET);
|
|
if (last_idx) {
|
|
PMD_DRV_LOG(ERR, sc, "TSTORM_ASSERT_LIST_INDEX 0x%x", last_idx);
|
|
}
|
|
|
|
/* print the asserts */
|
|
for (i = 0; i < STORM_ASSERT_ARRAY_SIZE; i++) {
|
|
|
|
row0 =
|
|
REG_RD(sc,
|
|
BAR_TSTRORM_INTMEM + TSTORM_ASSERT_LIST_OFFSET(i));
|
|
row1 =
|
|
REG_RD(sc,
|
|
BAR_TSTRORM_INTMEM + TSTORM_ASSERT_LIST_OFFSET(i) +
|
|
4);
|
|
row2 =
|
|
REG_RD(sc,
|
|
BAR_TSTRORM_INTMEM + TSTORM_ASSERT_LIST_OFFSET(i) +
|
|
8);
|
|
row3 =
|
|
REG_RD(sc,
|
|
BAR_TSTRORM_INTMEM + TSTORM_ASSERT_LIST_OFFSET(i) +
|
|
12);
|
|
|
|
if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
|
|
PMD_DRV_LOG(ERR, sc,
|
|
"TSTORM_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x",
|
|
i, row3, row2, row1, row0);
|
|
rc++;
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* CSTORM */
|
|
last_idx =
|
|
REG_RD8(sc, BAR_CSTRORM_INTMEM + CSTORM_ASSERT_LIST_INDEX_OFFSET);
|
|
if (last_idx) {
|
|
PMD_DRV_LOG(ERR, sc, "CSTORM_ASSERT_LIST_INDEX 0x%x", last_idx);
|
|
}
|
|
|
|
/* print the asserts */
|
|
for (i = 0; i < STORM_ASSERT_ARRAY_SIZE; i++) {
|
|
|
|
row0 =
|
|
REG_RD(sc,
|
|
BAR_CSTRORM_INTMEM + CSTORM_ASSERT_LIST_OFFSET(i));
|
|
row1 =
|
|
REG_RD(sc,
|
|
BAR_CSTRORM_INTMEM + CSTORM_ASSERT_LIST_OFFSET(i) +
|
|
4);
|
|
row2 =
|
|
REG_RD(sc,
|
|
BAR_CSTRORM_INTMEM + CSTORM_ASSERT_LIST_OFFSET(i) +
|
|
8);
|
|
row3 =
|
|
REG_RD(sc,
|
|
BAR_CSTRORM_INTMEM + CSTORM_ASSERT_LIST_OFFSET(i) +
|
|
12);
|
|
|
|
if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
|
|
PMD_DRV_LOG(ERR, sc,
|
|
"CSTORM_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x",
|
|
i, row3, row2, row1, row0);
|
|
rc++;
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* USTORM */
|
|
last_idx =
|
|
REG_RD8(sc, BAR_USTRORM_INTMEM + USTORM_ASSERT_LIST_INDEX_OFFSET);
|
|
if (last_idx) {
|
|
PMD_DRV_LOG(ERR, sc, "USTORM_ASSERT_LIST_INDEX 0x%x", last_idx);
|
|
}
|
|
|
|
/* print the asserts */
|
|
for (i = 0; i < STORM_ASSERT_ARRAY_SIZE; i++) {
|
|
|
|
row0 =
|
|
REG_RD(sc,
|
|
BAR_USTRORM_INTMEM + USTORM_ASSERT_LIST_OFFSET(i));
|
|
row1 =
|
|
REG_RD(sc,
|
|
BAR_USTRORM_INTMEM + USTORM_ASSERT_LIST_OFFSET(i) +
|
|
4);
|
|
row2 =
|
|
REG_RD(sc,
|
|
BAR_USTRORM_INTMEM + USTORM_ASSERT_LIST_OFFSET(i) +
|
|
8);
|
|
row3 =
|
|
REG_RD(sc,
|
|
BAR_USTRORM_INTMEM + USTORM_ASSERT_LIST_OFFSET(i) +
|
|
12);
|
|
|
|
if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) {
|
|
PMD_DRV_LOG(ERR, sc,
|
|
"USTORM_ASSERT_INDEX 0x%x = 0x%08x 0x%08x 0x%08x 0x%08x",
|
|
i, row3, row2, row1, row0);
|
|
rc++;
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void bnx2x_attn_int_deasserted3(struct bnx2x_softc *sc, uint32_t attn)
|
|
{
|
|
int func = SC_FUNC(sc);
|
|
uint32_t val;
|
|
|
|
if (attn & EVEREST_GEN_ATTN_IN_USE_MASK) {
|
|
|
|
if (attn & BNX2X_PMF_LINK_ASSERT(sc)) {
|
|
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_12 + func * 4, 0);
|
|
bnx2x_read_mf_cfg(sc);
|
|
sc->devinfo.mf_info.mf_config[SC_VN(sc)] =
|
|
MFCFG_RD(sc,
|
|
func_mf_config[SC_ABS_FUNC(sc)].config);
|
|
val =
|
|
SHMEM_RD(sc, func_mb[SC_FW_MB_IDX(sc)].drv_status);
|
|
|
|
if (val & DRV_STATUS_DCC_EVENT_MASK)
|
|
bnx2x_dcc_event(sc,
|
|
(val &
|
|
DRV_STATUS_DCC_EVENT_MASK));
|
|
|
|
if (val & DRV_STATUS_SET_MF_BW)
|
|
bnx2x_set_mf_bw(sc);
|
|
|
|
if (val & DRV_STATUS_DRV_INFO_REQ)
|
|
bnx2x_handle_drv_info_req(sc);
|
|
|
|
if ((sc->port.pmf == 0) && (val & DRV_STATUS_PMF))
|
|
bnx2x_pmf_update(sc);
|
|
|
|
if (val & DRV_STATUS_EEE_NEGOTIATION_RESULTS)
|
|
bnx2x_handle_eee_event(sc);
|
|
|
|
if (sc->link_vars.periodic_flags &
|
|
ELINK_PERIODIC_FLAGS_LINK_EVENT) {
|
|
/* sync with link */
|
|
bnx2x_acquire_phy_lock(sc);
|
|
sc->link_vars.periodic_flags &=
|
|
~ELINK_PERIODIC_FLAGS_LINK_EVENT;
|
|
bnx2x_release_phy_lock(sc);
|
|
if (IS_MF(sc)) {
|
|
bnx2x_link_sync_notify(sc);
|
|
}
|
|
bnx2x_link_report(sc);
|
|
}
|
|
|
|
/*
|
|
* Always call it here: bnx2x_link_report() will
|
|
* prevent the link indication duplication.
|
|
*/
|
|
bnx2x_link_status_update(sc);
|
|
|
|
} else if (attn & BNX2X_MC_ASSERT_BITS) {
|
|
|
|
PMD_DRV_LOG(ERR, sc, "MC assert!");
|
|
bnx2x_mc_assert(sc);
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_10, 0);
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_9, 0);
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_8, 0);
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_7, 0);
|
|
rte_panic("MC assert!");
|
|
|
|
} else if (attn & BNX2X_MCP_ASSERT) {
|
|
|
|
PMD_DRV_LOG(ERR, sc, "MCP assert!");
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_11, 0);
|
|
|
|
} else {
|
|
PMD_DRV_LOG(ERR, sc,
|
|
"Unknown HW assert! (attn 0x%08x)", attn);
|
|
}
|
|
}
|
|
|
|
if (attn & EVEREST_LATCHED_ATTN_IN_USE_MASK) {
|
|
PMD_DRV_LOG(ERR, sc, "LATCHED attention 0x%08x (masked)", attn);
|
|
if (attn & BNX2X_GRC_TIMEOUT) {
|
|
val = REG_RD(sc, MISC_REG_GRC_TIMEOUT_ATTN);
|
|
PMD_DRV_LOG(ERR, sc, "GRC time-out 0x%08x", val);
|
|
}
|
|
if (attn & BNX2X_GRC_RSV) {
|
|
val = REG_RD(sc, MISC_REG_GRC_RSV_ATTN);
|
|
PMD_DRV_LOG(ERR, sc, "GRC reserved 0x%08x", val);
|
|
}
|
|
REG_WR(sc, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0x7ff);
|
|
}
|
|
}
|
|
|
|
static void bnx2x_attn_int_deasserted2(struct bnx2x_softc *sc, uint32_t attn)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
int reg_offset;
|
|
uint32_t val0, mask0, val1, mask1;
|
|
uint32_t val;
|
|
|
|
if (attn & AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT) {
|
|
val = REG_RD(sc, CFC_REG_CFC_INT_STS_CLR);
|
|
PMD_DRV_LOG(ERR, sc, "CFC hw attention 0x%08x", val);
|
|
/* CFC error attention */
|
|
if (val & 0x2) {
|
|
PMD_DRV_LOG(ERR, sc, "FATAL error from CFC");
|
|
}
|
|
}
|
|
|
|
if (attn & AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT) {
|
|
val = REG_RD(sc, PXP_REG_PXP_INT_STS_CLR_0);
|
|
PMD_DRV_LOG(ERR, sc, "PXP hw attention-0 0x%08x", val);
|
|
/* RQ_USDMDP_FIFO_OVERFLOW */
|
|
if (val & 0x18000) {
|
|
PMD_DRV_LOG(ERR, sc, "FATAL error from PXP");
|
|
}
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
val = REG_RD(sc, PXP_REG_PXP_INT_STS_CLR_1);
|
|
PMD_DRV_LOG(ERR, sc, "PXP hw attention-1 0x%08x", val);
|
|
}
|
|
}
|
|
#define PXP2_EOP_ERROR_BIT PXP2_PXP2_INT_STS_CLR_0_REG_WR_PGLUE_EOP_ERROR
|
|
#define AEU_PXP2_HW_INT_BIT AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_HW_INTERRUPT
|
|
|
|
if (attn & AEU_PXP2_HW_INT_BIT) {
|
|
/* CQ47854 workaround do not panic on
|
|
* PXP2_PXP2_INT_STS_0_REG_WR_PGLUE_EOP_ERROR
|
|
*/
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
mask0 = REG_RD(sc, PXP2_REG_PXP2_INT_MASK_0);
|
|
val1 = REG_RD(sc, PXP2_REG_PXP2_INT_STS_1);
|
|
mask1 = REG_RD(sc, PXP2_REG_PXP2_INT_MASK_1);
|
|
val0 = REG_RD(sc, PXP2_REG_PXP2_INT_STS_0);
|
|
/*
|
|
* If the only PXP2_EOP_ERROR_BIT is set in
|
|
* STS0 and STS1 - clear it
|
|
*
|
|
* probably we lose additional attentions between
|
|
* STS0 and STS_CLR0, in this case user will not
|
|
* be notified about them
|
|
*/
|
|
if (val0 & mask0 & PXP2_EOP_ERROR_BIT &&
|
|
!(val1 & mask1))
|
|
val0 = REG_RD(sc, PXP2_REG_PXP2_INT_STS_CLR_0);
|
|
|
|
/* print the register, since no one can restore it */
|
|
PMD_DRV_LOG(ERR, sc,
|
|
"PXP2_REG_PXP2_INT_STS_CLR_0 0x%08x", val0);
|
|
|
|
/*
|
|
* if PXP2_PXP2_INT_STS_0_REG_WR_PGLUE_EOP_ERROR
|
|
* then notify
|
|
*/
|
|
if (val0 & PXP2_EOP_ERROR_BIT) {
|
|
PMD_DRV_LOG(ERR, sc, "PXP2_WR_PGLUE_EOP_ERROR");
|
|
|
|
/*
|
|
* if only PXP2_PXP2_INT_STS_0_REG_WR_PGLUE_EOP_ERROR is
|
|
* set then clear attention from PXP2 block without panic
|
|
*/
|
|
if (((val0 & mask0) == PXP2_EOP_ERROR_BIT) &&
|
|
((val1 & mask1) == 0))
|
|
attn &= ~AEU_PXP2_HW_INT_BIT;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (attn & HW_INTERRUT_ASSERT_SET_2) {
|
|
reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_2 :
|
|
MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2);
|
|
|
|
val = REG_RD(sc, reg_offset);
|
|
val &= ~(attn & HW_INTERRUT_ASSERT_SET_2);
|
|
REG_WR(sc, reg_offset, val);
|
|
|
|
PMD_DRV_LOG(ERR, sc,
|
|
"FATAL HW block attention set2 0x%x",
|
|
(uint32_t) (attn & HW_INTERRUT_ASSERT_SET_2));
|
|
rte_panic("HW block attention set2");
|
|
}
|
|
}
|
|
|
|
static void bnx2x_attn_int_deasserted1(struct bnx2x_softc *sc, uint32_t attn)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
int reg_offset;
|
|
uint32_t val;
|
|
|
|
if (attn & AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT) {
|
|
val = REG_RD(sc, DORQ_REG_DORQ_INT_STS_CLR);
|
|
PMD_DRV_LOG(ERR, sc, "DB hw attention 0x%08x", val);
|
|
/* DORQ discard attention */
|
|
if (val & 0x2) {
|
|
PMD_DRV_LOG(ERR, sc, "FATAL error from DORQ");
|
|
}
|
|
}
|
|
|
|
if (attn & HW_INTERRUT_ASSERT_SET_1) {
|
|
reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1 :
|
|
MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1);
|
|
|
|
val = REG_RD(sc, reg_offset);
|
|
val &= ~(attn & HW_INTERRUT_ASSERT_SET_1);
|
|
REG_WR(sc, reg_offset, val);
|
|
|
|
PMD_DRV_LOG(ERR, sc,
|
|
"FATAL HW block attention set1 0x%08x",
|
|
(uint32_t) (attn & HW_INTERRUT_ASSERT_SET_1));
|
|
rte_panic("HW block attention set1");
|
|
}
|
|
}
|
|
|
|
static void bnx2x_attn_int_deasserted0(struct bnx2x_softc *sc, uint32_t attn)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
int reg_offset;
|
|
uint32_t val;
|
|
|
|
reg_offset = (port) ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
|
|
MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0;
|
|
|
|
if (attn & AEU_INPUTS_ATTN_BITS_SPIO5) {
|
|
val = REG_RD(sc, reg_offset);
|
|
val &= ~AEU_INPUTS_ATTN_BITS_SPIO5;
|
|
REG_WR(sc, reg_offset, val);
|
|
|
|
PMD_DRV_LOG(WARNING, sc, "SPIO5 hw attention");
|
|
|
|
/* Fan failure attention */
|
|
elink_hw_reset_phy(&sc->link_params);
|
|
bnx2x_fan_failure(sc);
|
|
}
|
|
|
|
if ((attn & sc->link_vars.aeu_int_mask) && sc->port.pmf) {
|
|
bnx2x_acquire_phy_lock(sc);
|
|
elink_handle_module_detect_int(&sc->link_params);
|
|
bnx2x_release_phy_lock(sc);
|
|
}
|
|
|
|
if (attn & HW_INTERRUT_ASSERT_SET_0) {
|
|
val = REG_RD(sc, reg_offset);
|
|
val &= ~(attn & HW_INTERRUT_ASSERT_SET_0);
|
|
REG_WR(sc, reg_offset, val);
|
|
|
|
rte_panic("FATAL HW block attention set0 0x%lx",
|
|
(attn & (unsigned long)HW_INTERRUT_ASSERT_SET_0));
|
|
}
|
|
}
|
|
|
|
static void bnx2x_attn_int_deasserted(struct bnx2x_softc *sc, uint32_t deasserted)
|
|
{
|
|
struct attn_route attn;
|
|
struct attn_route *group_mask;
|
|
int port = SC_PORT(sc);
|
|
int index;
|
|
uint32_t reg_addr;
|
|
uint32_t val;
|
|
uint32_t aeu_mask;
|
|
uint8_t global = FALSE;
|
|
|
|
/*
|
|
* Need to take HW lock because MCP or other port might also
|
|
* try to handle this event.
|
|
*/
|
|
bnx2x_acquire_alr(sc);
|
|
|
|
if (bnx2x_chk_parity_attn(sc, &global, TRUE)) {
|
|
sc->recovery_state = BNX2X_RECOVERY_INIT;
|
|
|
|
/* disable HW interrupts */
|
|
bnx2x_int_disable(sc);
|
|
bnx2x_release_alr(sc);
|
|
return;
|
|
}
|
|
|
|
attn.sig[0] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + port * 4);
|
|
attn.sig[1] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 + port * 4);
|
|
attn.sig[2] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 + port * 4);
|
|
attn.sig[3] = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 + port * 4);
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
attn.sig[4] =
|
|
REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 + port * 4);
|
|
} else {
|
|
attn.sig[4] = 0;
|
|
}
|
|
|
|
for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) {
|
|
if (deasserted & (1 << index)) {
|
|
group_mask = &sc->attn_group[index];
|
|
|
|
bnx2x_attn_int_deasserted4(sc,
|
|
attn.
|
|
sig[4] & group_mask->sig[4]);
|
|
bnx2x_attn_int_deasserted3(sc,
|
|
attn.
|
|
sig[3] & group_mask->sig[3]);
|
|
bnx2x_attn_int_deasserted1(sc,
|
|
attn.
|
|
sig[1] & group_mask->sig[1]);
|
|
bnx2x_attn_int_deasserted2(sc,
|
|
attn.
|
|
sig[2] & group_mask->sig[2]);
|
|
bnx2x_attn_int_deasserted0(sc,
|
|
attn.
|
|
sig[0] & group_mask->sig[0]);
|
|
}
|
|
}
|
|
|
|
bnx2x_release_alr(sc);
|
|
|
|
if (sc->devinfo.int_block == INT_BLOCK_HC) {
|
|
reg_addr = (HC_REG_COMMAND_REG + port * 32 +
|
|
COMMAND_REG_ATTN_BITS_CLR);
|
|
} else {
|
|
reg_addr = (BAR_IGU_INTMEM + IGU_CMD_ATTN_BIT_CLR_UPPER * 8);
|
|
}
|
|
|
|
val = ~deasserted;
|
|
PMD_DRV_LOG(DEBUG, sc,
|
|
"about to mask 0x%08x at %s addr 0x%08x", val,
|
|
(sc->devinfo.int_block == INT_BLOCK_HC) ? "HC" : "IGU",
|
|
reg_addr);
|
|
REG_WR(sc, reg_addr, val);
|
|
|
|
if (~sc->attn_state & deasserted) {
|
|
PMD_DRV_LOG(ERR, sc, "IGU error");
|
|
}
|
|
|
|
reg_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
|
|
MISC_REG_AEU_MASK_ATTN_FUNC_0;
|
|
|
|
bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
|
|
|
|
aeu_mask = REG_RD(sc, reg_addr);
|
|
|
|
aeu_mask |= (deasserted & 0x3ff);
|
|
|
|
REG_WR(sc, reg_addr, aeu_mask);
|
|
bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
|
|
|
|
sc->attn_state &= ~deasserted;
|
|
}
|
|
|
|
static void bnx2x_attn_int(struct bnx2x_softc *sc)
|
|
{
|
|
/* read local copy of bits */
|
|
uint32_t attn_bits = le32toh(sc->def_sb->atten_status_block.attn_bits);
|
|
uint32_t attn_ack =
|
|
le32toh(sc->def_sb->atten_status_block.attn_bits_ack);
|
|
uint32_t attn_state = sc->attn_state;
|
|
|
|
/* look for changed bits */
|
|
uint32_t asserted = attn_bits & ~attn_ack & ~attn_state;
|
|
uint32_t deasserted = ~attn_bits & attn_ack & attn_state;
|
|
|
|
PMD_DRV_LOG(DEBUG, sc,
|
|
"attn_bits 0x%08x attn_ack 0x%08x asserted 0x%08x deasserted 0x%08x",
|
|
attn_bits, attn_ack, asserted, deasserted);
|
|
|
|
if (~(attn_bits ^ attn_ack) & (attn_bits ^ attn_state)) {
|
|
PMD_DRV_LOG(ERR, sc, "BAD attention state");
|
|
}
|
|
|
|
/* handle bits that were raised */
|
|
if (asserted) {
|
|
bnx2x_attn_int_asserted(sc, asserted);
|
|
}
|
|
|
|
if (deasserted) {
|
|
bnx2x_attn_int_deasserted(sc, deasserted);
|
|
}
|
|
}
|
|
|
|
static uint16_t bnx2x_update_dsb_idx(struct bnx2x_softc *sc)
|
|
{
|
|
struct host_sp_status_block *def_sb = sc->def_sb;
|
|
uint16_t rc = 0;
|
|
|
|
if (!def_sb)
|
|
return 0;
|
|
|
|
mb(); /* status block is written to by the chip */
|
|
|
|
if (sc->def_att_idx != def_sb->atten_status_block.attn_bits_index) {
|
|
sc->def_att_idx = def_sb->atten_status_block.attn_bits_index;
|
|
rc |= BNX2X_DEF_SB_ATT_IDX;
|
|
}
|
|
|
|
if (sc->def_idx != def_sb->sp_sb.running_index) {
|
|
sc->def_idx = def_sb->sp_sb.running_index;
|
|
rc |= BNX2X_DEF_SB_IDX;
|
|
}
|
|
|
|
mb();
|
|
|
|
return rc;
|
|
}
|
|
|
|
static struct ecore_queue_sp_obj *bnx2x_cid_to_q_obj(struct bnx2x_softc *sc,
|
|
uint32_t cid)
|
|
{
|
|
return &sc->sp_objs[CID_TO_FP(cid, sc)].q_obj;
|
|
}
|
|
|
|
static void bnx2x_handle_mcast_eqe(struct bnx2x_softc *sc)
|
|
{
|
|
struct ecore_mcast_ramrod_params rparam;
|
|
int rc;
|
|
|
|
memset(&rparam, 0, sizeof(rparam));
|
|
|
|
rparam.mcast_obj = &sc->mcast_obj;
|
|
|
|
/* clear pending state for the last command */
|
|
sc->mcast_obj.raw.clear_pending(&sc->mcast_obj.raw);
|
|
|
|
/* if there are pending mcast commands - send them */
|
|
if (sc->mcast_obj.check_pending(&sc->mcast_obj)) {
|
|
rc = ecore_config_mcast(sc, &rparam, ECORE_MCAST_CMD_CONT);
|
|
if (rc < 0) {
|
|
PMD_DRV_LOG(INFO, sc,
|
|
"Failed to send pending mcast commands (%d)",
|
|
rc);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
bnx2x_handle_classification_eqe(struct bnx2x_softc *sc, union event_ring_elem *elem)
|
|
{
|
|
unsigned long ramrod_flags = 0;
|
|
int rc = 0;
|
|
uint32_t cid = elem->message.data.eth_event.echo & BNX2X_SWCID_MASK;
|
|
struct ecore_vlan_mac_obj *vlan_mac_obj;
|
|
|
|
/* always push next commands out, don't wait here */
|
|
bnx2x_set_bit(RAMROD_CONT, &ramrod_flags);
|
|
|
|
switch (le32toh(elem->message.data.eth_event.echo) >> BNX2X_SWCID_SHIFT) {
|
|
case ECORE_FILTER_MAC_PENDING:
|
|
PMD_DRV_LOG(DEBUG, sc, "Got SETUP_MAC completions");
|
|
vlan_mac_obj = &sc->sp_objs[cid].mac_obj;
|
|
break;
|
|
|
|
case ECORE_FILTER_MCAST_PENDING:
|
|
PMD_DRV_LOG(DEBUG, sc, "Got SETUP_MCAST completions");
|
|
bnx2x_handle_mcast_eqe(sc);
|
|
return;
|
|
|
|
default:
|
|
PMD_DRV_LOG(NOTICE, sc, "Unsupported classification command: %d",
|
|
elem->message.data.eth_event.echo);
|
|
return;
|
|
}
|
|
|
|
rc = vlan_mac_obj->complete(sc, vlan_mac_obj, elem, &ramrod_flags);
|
|
|
|
if (rc < 0) {
|
|
PMD_DRV_LOG(NOTICE, sc,
|
|
"Failed to schedule new commands (%d)", rc);
|
|
} else if (rc > 0) {
|
|
PMD_DRV_LOG(DEBUG, sc, "Scheduled next pending commands...");
|
|
}
|
|
}
|
|
|
|
static void bnx2x_handle_rx_mode_eqe(struct bnx2x_softc *sc)
|
|
{
|
|
bnx2x_clear_bit(ECORE_FILTER_RX_MODE_PENDING, &sc->sp_state);
|
|
|
|
/* send rx_mode command again if was requested */
|
|
if (bnx2x_test_and_clear_bit(ECORE_FILTER_RX_MODE_SCHED, &sc->sp_state)) {
|
|
bnx2x_set_storm_rx_mode(sc);
|
|
}
|
|
}
|
|
|
|
static void bnx2x_update_eq_prod(struct bnx2x_softc *sc, uint16_t prod)
|
|
{
|
|
storm_memset_eq_prod(sc, prod, SC_FUNC(sc));
|
|
wmb(); /* keep prod updates ordered */
|
|
}
|
|
|
|
static void bnx2x_eq_int(struct bnx2x_softc *sc)
|
|
{
|
|
uint16_t hw_cons, sw_cons, sw_prod;
|
|
union event_ring_elem *elem;
|
|
uint8_t echo;
|
|
uint32_t cid;
|
|
uint8_t opcode;
|
|
int spqe_cnt = 0;
|
|
struct ecore_queue_sp_obj *q_obj;
|
|
struct ecore_func_sp_obj *f_obj = &sc->func_obj;
|
|
struct ecore_raw_obj *rss_raw = &sc->rss_conf_obj.raw;
|
|
|
|
hw_cons = le16toh(*sc->eq_cons_sb);
|
|
|
|
/*
|
|
* The hw_cons range is 1-255, 257 - the sw_cons range is 0-254, 256.
|
|
* when we get to the next-page we need to adjust so the loop
|
|
* condition below will be met. The next element is the size of a
|
|
* regular element and hence incrementing by 1
|
|
*/
|
|
if ((hw_cons & EQ_DESC_MAX_PAGE) == EQ_DESC_MAX_PAGE) {
|
|
hw_cons++;
|
|
}
|
|
|
|
/*
|
|
* This function may never run in parallel with itself for a
|
|
* specific sc and no need for a read memory barrier here.
|
|
*/
|
|
sw_cons = sc->eq_cons;
|
|
sw_prod = sc->eq_prod;
|
|
|
|
for (;
|
|
sw_cons != hw_cons;
|
|
sw_prod = NEXT_EQ_IDX(sw_prod), sw_cons = NEXT_EQ_IDX(sw_cons)) {
|
|
|
|
elem = &sc->eq[EQ_DESC(sw_cons)];
|
|
|
|
/* elem CID originates from FW, actually LE */
|
|
cid = SW_CID(elem->message.data.cfc_del_event.cid);
|
|
opcode = elem->message.opcode;
|
|
|
|
/* handle eq element */
|
|
switch (opcode) {
|
|
case EVENT_RING_OPCODE_STAT_QUERY:
|
|
PMD_DEBUG_PERIODIC_LOG(DEBUG, sc, "got statistics completion event %d",
|
|
sc->stats_comp++);
|
|
/* nothing to do with stats comp */
|
|
goto next_spqe;
|
|
|
|
case EVENT_RING_OPCODE_CFC_DEL:
|
|
/* handle according to cid range */
|
|
/* we may want to verify here that the sc state is HALTING */
|
|
PMD_DRV_LOG(DEBUG, sc, "got delete ramrod for MULTI[%d]",
|
|
cid);
|
|
q_obj = bnx2x_cid_to_q_obj(sc, cid);
|
|
if (q_obj->complete_cmd(sc, q_obj, ECORE_Q_CMD_CFC_DEL)) {
|
|
break;
|
|
}
|
|
goto next_spqe;
|
|
|
|
case EVENT_RING_OPCODE_STOP_TRAFFIC:
|
|
PMD_DRV_LOG(DEBUG, sc, "got STOP TRAFFIC");
|
|
if (f_obj->complete_cmd(sc, f_obj, ECORE_F_CMD_TX_STOP)) {
|
|
break;
|
|
}
|
|
goto next_spqe;
|
|
|
|
case EVENT_RING_OPCODE_START_TRAFFIC:
|
|
PMD_DRV_LOG(DEBUG, sc, "got START TRAFFIC");
|
|
if (f_obj->complete_cmd
|
|
(sc, f_obj, ECORE_F_CMD_TX_START)) {
|
|
break;
|
|
}
|
|
goto next_spqe;
|
|
|
|
case EVENT_RING_OPCODE_FUNCTION_UPDATE:
|
|
echo = elem->message.data.function_update_event.echo;
|
|
if (echo == SWITCH_UPDATE) {
|
|
PMD_DRV_LOG(DEBUG, sc,
|
|
"got FUNC_SWITCH_UPDATE ramrod");
|
|
if (f_obj->complete_cmd(sc, f_obj,
|
|
ECORE_F_CMD_SWITCH_UPDATE))
|
|
{
|
|
break;
|
|
}
|
|
} else {
|
|
PMD_DRV_LOG(DEBUG, sc,
|
|
"AFEX: ramrod completed FUNCTION_UPDATE");
|
|
f_obj->complete_cmd(sc, f_obj,
|
|
ECORE_F_CMD_AFEX_UPDATE);
|
|
}
|
|
goto next_spqe;
|
|
|
|
case EVENT_RING_OPCODE_FORWARD_SETUP:
|
|
q_obj = &bnx2x_fwd_sp_obj(sc, q_obj);
|
|
if (q_obj->complete_cmd(sc, q_obj,
|
|
ECORE_Q_CMD_SETUP_TX_ONLY)) {
|
|
break;
|
|
}
|
|
goto next_spqe;
|
|
|
|
case EVENT_RING_OPCODE_FUNCTION_START:
|
|
PMD_DRV_LOG(DEBUG, sc, "got FUNC_START ramrod");
|
|
if (f_obj->complete_cmd(sc, f_obj, ECORE_F_CMD_START)) {
|
|
break;
|
|
}
|
|
goto next_spqe;
|
|
|
|
case EVENT_RING_OPCODE_FUNCTION_STOP:
|
|
PMD_DRV_LOG(DEBUG, sc, "got FUNC_STOP ramrod");
|
|
if (f_obj->complete_cmd(sc, f_obj, ECORE_F_CMD_STOP)) {
|
|
break;
|
|
}
|
|
goto next_spqe;
|
|
}
|
|
|
|
switch (opcode | sc->state) {
|
|
case (EVENT_RING_OPCODE_RSS_UPDATE_RULES | BNX2X_STATE_OPEN):
|
|
case (EVENT_RING_OPCODE_RSS_UPDATE_RULES | BNX2X_STATE_OPENING_WAITING_PORT):
|
|
cid =
|
|
elem->message.data.eth_event.echo & BNX2X_SWCID_MASK;
|
|
PMD_DRV_LOG(DEBUG, sc, "got RSS_UPDATE ramrod. CID %d",
|
|
cid);
|
|
rss_raw->clear_pending(rss_raw);
|
|
break;
|
|
|
|
case (EVENT_RING_OPCODE_SET_MAC | BNX2X_STATE_OPEN):
|
|
case (EVENT_RING_OPCODE_SET_MAC | BNX2X_STATE_DIAG):
|
|
case (EVENT_RING_OPCODE_SET_MAC | BNX2X_STATE_CLOSING_WAITING_HALT):
|
|
case (EVENT_RING_OPCODE_CLASSIFICATION_RULES | BNX2X_STATE_OPEN):
|
|
case (EVENT_RING_OPCODE_CLASSIFICATION_RULES | BNX2X_STATE_DIAG):
|
|
case (EVENT_RING_OPCODE_CLASSIFICATION_RULES | BNX2X_STATE_CLOSING_WAITING_HALT):
|
|
PMD_DRV_LOG(DEBUG, sc,
|
|
"got (un)set mac ramrod");
|
|
bnx2x_handle_classification_eqe(sc, elem);
|
|
break;
|
|
|
|
case (EVENT_RING_OPCODE_MULTICAST_RULES | BNX2X_STATE_OPEN):
|
|
case (EVENT_RING_OPCODE_MULTICAST_RULES | BNX2X_STATE_DIAG):
|
|
case (EVENT_RING_OPCODE_MULTICAST_RULES | BNX2X_STATE_CLOSING_WAITING_HALT):
|
|
PMD_DRV_LOG(DEBUG, sc,
|
|
"got mcast ramrod");
|
|
bnx2x_handle_mcast_eqe(sc);
|
|
break;
|
|
|
|
case (EVENT_RING_OPCODE_FILTERS_RULES | BNX2X_STATE_OPEN):
|
|
case (EVENT_RING_OPCODE_FILTERS_RULES | BNX2X_STATE_DIAG):
|
|
case (EVENT_RING_OPCODE_FILTERS_RULES | BNX2X_STATE_CLOSING_WAITING_HALT):
|
|
PMD_DRV_LOG(DEBUG, sc,
|
|
"got rx_mode ramrod");
|
|
bnx2x_handle_rx_mode_eqe(sc);
|
|
break;
|
|
|
|
default:
|
|
/* unknown event log error and continue */
|
|
PMD_DRV_LOG(INFO, sc, "Unknown EQ event %d, sc->state 0x%x",
|
|
elem->message.opcode, sc->state);
|
|
}
|
|
|
|
next_spqe:
|
|
spqe_cnt++;
|
|
} /* for */
|
|
|
|
mb();
|
|
atomic_add_acq_long(&sc->eq_spq_left, spqe_cnt);
|
|
|
|
sc->eq_cons = sw_cons;
|
|
sc->eq_prod = sw_prod;
|
|
|
|
/* make sure that above mem writes were issued towards the memory */
|
|
wmb();
|
|
|
|
/* update producer */
|
|
bnx2x_update_eq_prod(sc, sc->eq_prod);
|
|
}
|
|
|
|
static int bnx2x_handle_sp_tq(struct bnx2x_softc *sc)
|
|
{
|
|
uint16_t status;
|
|
int rc = 0;
|
|
|
|
PMD_DRV_LOG(DEBUG, sc, "---> SP TASK <---");
|
|
|
|
/* what work needs to be performed? */
|
|
status = bnx2x_update_dsb_idx(sc);
|
|
|
|
PMD_DRV_LOG(DEBUG, sc, "dsb status 0x%04x", status);
|
|
|
|
/* HW attentions */
|
|
if (status & BNX2X_DEF_SB_ATT_IDX) {
|
|
PMD_DRV_LOG(DEBUG, sc, "---> ATTN INTR <---");
|
|
bnx2x_attn_int(sc);
|
|
status &= ~BNX2X_DEF_SB_ATT_IDX;
|
|
rc = 1;
|
|
}
|
|
|
|
/* SP events: STAT_QUERY and others */
|
|
if (status & BNX2X_DEF_SB_IDX) {
|
|
/* handle EQ completions */
|
|
PMD_DRV_LOG(DEBUG, sc, "---> EQ INTR <---");
|
|
bnx2x_eq_int(sc);
|
|
bnx2x_ack_sb(sc, sc->igu_dsb_id, USTORM_ID,
|
|
le16toh(sc->def_idx), IGU_INT_NOP, 1);
|
|
status &= ~BNX2X_DEF_SB_IDX;
|
|
}
|
|
|
|
/* if status is non zero then something went wrong */
|
|
if (unlikely(status)) {
|
|
PMD_DRV_LOG(INFO, sc,
|
|
"Got an unknown SP interrupt! (0x%04x)", status);
|
|
}
|
|
|
|
/* ack status block only if something was actually handled */
|
|
bnx2x_ack_sb(sc, sc->igu_dsb_id, ATTENTION_ID,
|
|
le16toh(sc->def_att_idx), IGU_INT_ENABLE, 1);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void bnx2x_handle_fp_tq(struct bnx2x_fastpath *fp)
|
|
{
|
|
struct bnx2x_softc *sc = fp->sc;
|
|
uint8_t more_rx = FALSE;
|
|
|
|
/* Make sure FP is initialized */
|
|
if (!fp->sb_running_index)
|
|
return;
|
|
|
|
PMD_DEBUG_PERIODIC_LOG(DEBUG, sc,
|
|
"---> FP TASK QUEUE (%d) <--", fp->index);
|
|
|
|
/* update the fastpath index */
|
|
bnx2x_update_fp_sb_idx(fp);
|
|
|
|
if (rte_atomic32_read(&sc->scan_fp) == 1) {
|
|
if (bnx2x_has_rx_work(fp)) {
|
|
more_rx = bnx2x_rxeof(sc, fp);
|
|
}
|
|
|
|
if (more_rx) {
|
|
/* still more work to do */
|
|
bnx2x_handle_fp_tq(fp);
|
|
return;
|
|
}
|
|
/* We have completed slow path completion, clear the flag */
|
|
rte_atomic32_set(&sc->scan_fp, 0);
|
|
}
|
|
|
|
bnx2x_ack_sb(sc, fp->igu_sb_id, USTORM_ID,
|
|
le16toh(fp->fp_hc_idx), IGU_INT_ENABLE, 1);
|
|
}
|
|
|
|
/*
|
|
* Legacy interrupt entry point.
|
|
*
|
|
* Verifies that the controller generated the interrupt and
|
|
* then calls a separate routine to handle the various
|
|
* interrupt causes: link, RX, and TX.
|
|
*/
|
|
int bnx2x_intr_legacy(struct bnx2x_softc *sc)
|
|
{
|
|
struct bnx2x_fastpath *fp;
|
|
uint32_t status, mask;
|
|
int i, rc = 0;
|
|
|
|
/*
|
|
* 0 for ustorm, 1 for cstorm
|
|
* the bits returned from ack_int() are 0-15
|
|
* bit 0 = attention status block
|
|
* bit 1 = fast path status block
|
|
* a mask of 0x2 or more = tx/rx event
|
|
* a mask of 1 = slow path event
|
|
*/
|
|
|
|
status = bnx2x_ack_int(sc);
|
|
|
|
/* the interrupt is not for us */
|
|
if (unlikely(status == 0)) {
|
|
return 0;
|
|
}
|
|
|
|
PMD_DEBUG_PERIODIC_LOG(DEBUG, sc, "Interrupt status 0x%04x", status);
|
|
//bnx2x_dump_status_block(sc);
|
|
|
|
FOR_EACH_ETH_QUEUE(sc, i) {
|
|
fp = &sc->fp[i];
|
|
mask = (0x2 << (fp->index + CNIC_SUPPORT(sc)));
|
|
if (status & mask) {
|
|
/* acknowledge and disable further fastpath interrupts */
|
|
bnx2x_ack_sb(sc, fp->igu_sb_id, USTORM_ID,
|
|
0, IGU_INT_DISABLE, 0);
|
|
bnx2x_handle_fp_tq(fp);
|
|
status &= ~mask;
|
|
}
|
|
}
|
|
|
|
if (unlikely(status & 0x1)) {
|
|
/* acknowledge and disable further slowpath interrupts */
|
|
bnx2x_ack_sb(sc, sc->igu_dsb_id, USTORM_ID,
|
|
0, IGU_INT_DISABLE, 0);
|
|
rc = bnx2x_handle_sp_tq(sc);
|
|
status &= ~0x1;
|
|
}
|
|
|
|
if (unlikely(status)) {
|
|
PMD_DRV_LOG(WARNING, sc,
|
|
"Unexpected fastpath status (0x%08x)!", status);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int bnx2x_init_hw_common_chip(struct bnx2x_softc *sc);
|
|
static int bnx2x_init_hw_common(struct bnx2x_softc *sc);
|
|
static int bnx2x_init_hw_port(struct bnx2x_softc *sc);
|
|
static int bnx2x_init_hw_func(struct bnx2x_softc *sc);
|
|
static void bnx2x_reset_common(struct bnx2x_softc *sc);
|
|
static void bnx2x_reset_port(struct bnx2x_softc *sc);
|
|
static void bnx2x_reset_func(struct bnx2x_softc *sc);
|
|
static int bnx2x_init_firmware(struct bnx2x_softc *sc);
|
|
static void bnx2x_release_firmware(struct bnx2x_softc *sc);
|
|
|
|
static struct
|
|
ecore_func_sp_drv_ops bnx2x_func_sp_drv = {
|
|
.init_hw_cmn_chip = bnx2x_init_hw_common_chip,
|
|
.init_hw_cmn = bnx2x_init_hw_common,
|
|
.init_hw_port = bnx2x_init_hw_port,
|
|
.init_hw_func = bnx2x_init_hw_func,
|
|
|
|
.reset_hw_cmn = bnx2x_reset_common,
|
|
.reset_hw_port = bnx2x_reset_port,
|
|
.reset_hw_func = bnx2x_reset_func,
|
|
|
|
.init_fw = bnx2x_init_firmware,
|
|
.release_fw = bnx2x_release_firmware,
|
|
};
|
|
|
|
static void bnx2x_init_func_obj(struct bnx2x_softc *sc)
|
|
{
|
|
sc->dmae_ready = 0;
|
|
|
|
PMD_INIT_FUNC_TRACE(sc);
|
|
|
|
ecore_init_func_obj(sc,
|
|
&sc->func_obj,
|
|
BNX2X_SP(sc, func_rdata),
|
|
(rte_iova_t)BNX2X_SP_MAPPING(sc, func_rdata),
|
|
BNX2X_SP(sc, func_afex_rdata),
|
|
(rte_iova_t)BNX2X_SP_MAPPING(sc, func_afex_rdata),
|
|
&bnx2x_func_sp_drv);
|
|
}
|
|
|
|
static int bnx2x_init_hw(struct bnx2x_softc *sc, uint32_t load_code)
|
|
{
|
|
struct ecore_func_state_params func_params = { NULL };
|
|
int rc;
|
|
|
|
PMD_INIT_FUNC_TRACE(sc);
|
|
|
|
/* prepare the parameters for function state transitions */
|
|
bnx2x_set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
|
|
|
|
func_params.f_obj = &sc->func_obj;
|
|
func_params.cmd = ECORE_F_CMD_HW_INIT;
|
|
|
|
func_params.params.hw_init.load_phase = load_code;
|
|
|
|
/*
|
|
* Via a plethora of function pointers, we will eventually reach
|
|
* bnx2x_init_hw_common(), bnx2x_init_hw_port(), or bnx2x_init_hw_func().
|
|
*/
|
|
rc = ecore_func_state_change(sc, &func_params);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void
|
|
bnx2x_fill(struct bnx2x_softc *sc, uint32_t addr, int fill, uint32_t len)
|
|
{
|
|
uint32_t i;
|
|
|
|
if (!(len % 4) && !(addr % 4)) {
|
|
for (i = 0; i < len; i += 4) {
|
|
REG_WR(sc, (addr + i), fill);
|
|
}
|
|
} else {
|
|
for (i = 0; i < len; i++) {
|
|
REG_WR8(sc, (addr + i), fill);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* writes FP SP data to FW - data_size in dwords */
|
|
static void
|
|
bnx2x_wr_fp_sb_data(struct bnx2x_softc *sc, int fw_sb_id, uint32_t * sb_data_p,
|
|
uint32_t data_size)
|
|
{
|
|
uint32_t index;
|
|
|
|
for (index = 0; index < data_size; index++) {
|
|
REG_WR(sc,
|
|
(BAR_CSTRORM_INTMEM +
|
|
CSTORM_STATUS_BLOCK_DATA_OFFSET(fw_sb_id) +
|
|
(sizeof(uint32_t) * index)), *(sb_data_p + index));
|
|
}
|
|
}
|
|
|
|
static void bnx2x_zero_fp_sb(struct bnx2x_softc *sc, int fw_sb_id)
|
|
{
|
|
struct hc_status_block_data_e2 sb_data_e2;
|
|
struct hc_status_block_data_e1x sb_data_e1x;
|
|
uint32_t *sb_data_p;
|
|
uint32_t data_size = 0;
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
memset(&sb_data_e2, 0, sizeof(struct hc_status_block_data_e2));
|
|
sb_data_e2.common.state = SB_DISABLED;
|
|
sb_data_e2.common.p_func.vf_valid = FALSE;
|
|
sb_data_p = (uint32_t *) & sb_data_e2;
|
|
data_size = (sizeof(struct hc_status_block_data_e2) /
|
|
sizeof(uint32_t));
|
|
} else {
|
|
memset(&sb_data_e1x, 0,
|
|
sizeof(struct hc_status_block_data_e1x));
|
|
sb_data_e1x.common.state = SB_DISABLED;
|
|
sb_data_e1x.common.p_func.vf_valid = FALSE;
|
|
sb_data_p = (uint32_t *) & sb_data_e1x;
|
|
data_size = (sizeof(struct hc_status_block_data_e1x) /
|
|
sizeof(uint32_t));
|
|
}
|
|
|
|
bnx2x_wr_fp_sb_data(sc, fw_sb_id, sb_data_p, data_size);
|
|
|
|
bnx2x_fill(sc,
|
|
(BAR_CSTRORM_INTMEM + CSTORM_STATUS_BLOCK_OFFSET(fw_sb_id)), 0,
|
|
CSTORM_STATUS_BLOCK_SIZE);
|
|
bnx2x_fill(sc, (BAR_CSTRORM_INTMEM + CSTORM_SYNC_BLOCK_OFFSET(fw_sb_id)),
|
|
0, CSTORM_SYNC_BLOCK_SIZE);
|
|
}
|
|
|
|
static void
|
|
bnx2x_wr_sp_sb_data(struct bnx2x_softc *sc,
|
|
struct hc_sp_status_block_data *sp_sb_data)
|
|
{
|
|
uint32_t i;
|
|
|
|
for (i = 0;
|
|
i < (sizeof(struct hc_sp_status_block_data) / sizeof(uint32_t));
|
|
i++) {
|
|
REG_WR(sc,
|
|
(BAR_CSTRORM_INTMEM +
|
|
CSTORM_SP_STATUS_BLOCK_DATA_OFFSET(SC_FUNC(sc)) +
|
|
(i * sizeof(uint32_t))),
|
|
*((uint32_t *) sp_sb_data + i));
|
|
}
|
|
}
|
|
|
|
static void bnx2x_zero_sp_sb(struct bnx2x_softc *sc)
|
|
{
|
|
struct hc_sp_status_block_data sp_sb_data;
|
|
|
|
memset(&sp_sb_data, 0, sizeof(struct hc_sp_status_block_data));
|
|
|
|
sp_sb_data.state = SB_DISABLED;
|
|
sp_sb_data.p_func.vf_valid = FALSE;
|
|
|
|
bnx2x_wr_sp_sb_data(sc, &sp_sb_data);
|
|
|
|
bnx2x_fill(sc,
|
|
(BAR_CSTRORM_INTMEM +
|
|
CSTORM_SP_STATUS_BLOCK_OFFSET(SC_FUNC(sc))),
|
|
0, CSTORM_SP_STATUS_BLOCK_SIZE);
|
|
bnx2x_fill(sc,
|
|
(BAR_CSTRORM_INTMEM +
|
|
CSTORM_SP_SYNC_BLOCK_OFFSET(SC_FUNC(sc))),
|
|
0, CSTORM_SP_SYNC_BLOCK_SIZE);
|
|
}
|
|
|
|
static void
|
|
bnx2x_setup_ndsb_state_machine(struct hc_status_block_sm *hc_sm, int igu_sb_id,
|
|
int igu_seg_id)
|
|
{
|
|
hc_sm->igu_sb_id = igu_sb_id;
|
|
hc_sm->igu_seg_id = igu_seg_id;
|
|
hc_sm->timer_value = 0xFF;
|
|
hc_sm->time_to_expire = 0xFFFFFFFF;
|
|
}
|
|
|
|
static void bnx2x_map_sb_state_machines(struct hc_index_data *index_data)
|
|
{
|
|
/* zero out state machine indices */
|
|
|
|
/* rx indices */
|
|
index_data[HC_INDEX_ETH_RX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID;
|
|
|
|
/* tx indices */
|
|
index_data[HC_INDEX_OOO_TX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID;
|
|
index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags &= ~HC_INDEX_DATA_SM_ID;
|
|
index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags &= ~HC_INDEX_DATA_SM_ID;
|
|
index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags &= ~HC_INDEX_DATA_SM_ID;
|
|
|
|
/* map indices */
|
|
|
|
/* rx indices */
|
|
index_data[HC_INDEX_ETH_RX_CQ_CONS].flags |=
|
|
(SM_RX_ID << HC_INDEX_DATA_SM_ID_SHIFT);
|
|
|
|
/* tx indices */
|
|
index_data[HC_INDEX_OOO_TX_CQ_CONS].flags |=
|
|
(SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT);
|
|
index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags |=
|
|
(SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT);
|
|
index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags |=
|
|
(SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT);
|
|
index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags |=
|
|
(SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT);
|
|
}
|
|
|
|
static void
|
|
bnx2x_init_sb(struct bnx2x_softc *sc, rte_iova_t busaddr, int vfid,
|
|
uint8_t vf_valid, int fw_sb_id, int igu_sb_id)
|
|
{
|
|
struct hc_status_block_data_e2 sb_data_e2;
|
|
struct hc_status_block_data_e1x sb_data_e1x;
|
|
struct hc_status_block_sm *hc_sm_p;
|
|
uint32_t *sb_data_p;
|
|
int igu_seg_id;
|
|
int data_size;
|
|
|
|
if (CHIP_INT_MODE_IS_BC(sc)) {
|
|
igu_seg_id = HC_SEG_ACCESS_NORM;
|
|
} else {
|
|
igu_seg_id = IGU_SEG_ACCESS_NORM;
|
|
}
|
|
|
|
bnx2x_zero_fp_sb(sc, fw_sb_id);
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
memset(&sb_data_e2, 0, sizeof(struct hc_status_block_data_e2));
|
|
sb_data_e2.common.state = SB_ENABLED;
|
|
sb_data_e2.common.p_func.pf_id = SC_FUNC(sc);
|
|
sb_data_e2.common.p_func.vf_id = vfid;
|
|
sb_data_e2.common.p_func.vf_valid = vf_valid;
|
|
sb_data_e2.common.p_func.vnic_id = SC_VN(sc);
|
|
sb_data_e2.common.same_igu_sb_1b = TRUE;
|
|
sb_data_e2.common.host_sb_addr.hi = U64_HI(busaddr);
|
|
sb_data_e2.common.host_sb_addr.lo = U64_LO(busaddr);
|
|
hc_sm_p = sb_data_e2.common.state_machine;
|
|
sb_data_p = (uint32_t *) & sb_data_e2;
|
|
data_size = (sizeof(struct hc_status_block_data_e2) /
|
|
sizeof(uint32_t));
|
|
bnx2x_map_sb_state_machines(sb_data_e2.index_data);
|
|
} else {
|
|
memset(&sb_data_e1x, 0,
|
|
sizeof(struct hc_status_block_data_e1x));
|
|
sb_data_e1x.common.state = SB_ENABLED;
|
|
sb_data_e1x.common.p_func.pf_id = SC_FUNC(sc);
|
|
sb_data_e1x.common.p_func.vf_id = 0xff;
|
|
sb_data_e1x.common.p_func.vf_valid = FALSE;
|
|
sb_data_e1x.common.p_func.vnic_id = SC_VN(sc);
|
|
sb_data_e1x.common.same_igu_sb_1b = TRUE;
|
|
sb_data_e1x.common.host_sb_addr.hi = U64_HI(busaddr);
|
|
sb_data_e1x.common.host_sb_addr.lo = U64_LO(busaddr);
|
|
hc_sm_p = sb_data_e1x.common.state_machine;
|
|
sb_data_p = (uint32_t *) & sb_data_e1x;
|
|
data_size = (sizeof(struct hc_status_block_data_e1x) /
|
|
sizeof(uint32_t));
|
|
bnx2x_map_sb_state_machines(sb_data_e1x.index_data);
|
|
}
|
|
|
|
bnx2x_setup_ndsb_state_machine(&hc_sm_p[SM_RX_ID], igu_sb_id, igu_seg_id);
|
|
bnx2x_setup_ndsb_state_machine(&hc_sm_p[SM_TX_ID], igu_sb_id, igu_seg_id);
|
|
|
|
/* write indices to HW - PCI guarantees endianity of regpairs */
|
|
bnx2x_wr_fp_sb_data(sc, fw_sb_id, sb_data_p, data_size);
|
|
}
|
|
|
|
static uint8_t bnx2x_fp_qzone_id(struct bnx2x_fastpath *fp)
|
|
{
|
|
if (CHIP_IS_E1x(fp->sc)) {
|
|
return fp->cl_id + SC_PORT(fp->sc) * ETH_MAX_RX_CLIENTS_E1H;
|
|
} else {
|
|
return fp->cl_id;
|
|
}
|
|
}
|
|
|
|
static uint32_t
|
|
bnx2x_rx_ustorm_prods_offset(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp)
|
|
{
|
|
uint32_t offset = BAR_USTRORM_INTMEM;
|
|
|
|
if (IS_VF(sc)) {
|
|
return PXP_VF_ADDR_USDM_QUEUES_START +
|
|
(sc->acquire_resp.resc.hw_qid[fp->index] *
|
|
sizeof(struct ustorm_queue_zone_data));
|
|
} else if (!CHIP_IS_E1x(sc)) {
|
|
offset += USTORM_RX_PRODS_E2_OFFSET(fp->cl_qzone_id);
|
|
} else {
|
|
offset += USTORM_RX_PRODS_E1X_OFFSET(SC_PORT(sc), fp->cl_id);
|
|
}
|
|
|
|
return offset;
|
|
}
|
|
|
|
static void bnx2x_init_eth_fp(struct bnx2x_softc *sc, int idx)
|
|
{
|
|
struct bnx2x_fastpath *fp = &sc->fp[idx];
|
|
uint32_t cids[ECORE_MULTI_TX_COS] = { 0 };
|
|
unsigned long q_type = 0;
|
|
int cos;
|
|
|
|
fp->sc = sc;
|
|
fp->index = idx;
|
|
|
|
fp->igu_sb_id = (sc->igu_base_sb + idx + CNIC_SUPPORT(sc));
|
|
fp->fw_sb_id = (sc->base_fw_ndsb + idx + CNIC_SUPPORT(sc));
|
|
|
|
if (CHIP_IS_E1x(sc))
|
|
fp->cl_id = SC_L_ID(sc) + idx;
|
|
else
|
|
/* want client ID same as IGU SB ID for non-E1 */
|
|
fp->cl_id = fp->igu_sb_id;
|
|
fp->cl_qzone_id = bnx2x_fp_qzone_id(fp);
|
|
|
|
/* setup sb indices */
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
fp->sb_index_values = fp->status_block.e2_sb->sb.index_values;
|
|
fp->sb_running_index = fp->status_block.e2_sb->sb.running_index;
|
|
} else {
|
|
fp->sb_index_values = fp->status_block.e1x_sb->sb.index_values;
|
|
fp->sb_running_index =
|
|
fp->status_block.e1x_sb->sb.running_index;
|
|
}
|
|
|
|
/* init shortcut */
|
|
fp->ustorm_rx_prods_offset = bnx2x_rx_ustorm_prods_offset(sc, fp);
|
|
|
|
fp->rx_cq_cons_sb = &fp->sb_index_values[HC_INDEX_ETH_RX_CQ_CONS];
|
|
|
|
for (cos = 0; cos < sc->max_cos; cos++) {
|
|
cids[cos] = idx;
|
|
}
|
|
fp->tx_cons_sb = &fp->sb_index_values[HC_INDEX_ETH_TX_CQ_CONS_COS0];
|
|
|
|
/* nothing more for a VF to do */
|
|
if (IS_VF(sc)) {
|
|
return;
|
|
}
|
|
|
|
bnx2x_init_sb(sc, fp->sb_dma.paddr, BNX2X_VF_ID_INVALID, FALSE,
|
|
fp->fw_sb_id, fp->igu_sb_id);
|
|
|
|
bnx2x_update_fp_sb_idx(fp);
|
|
|
|
/* Configure Queue State object */
|
|
bnx2x_set_bit(ECORE_Q_TYPE_HAS_RX, &q_type);
|
|
bnx2x_set_bit(ECORE_Q_TYPE_HAS_TX, &q_type);
|
|
|
|
ecore_init_queue_obj(sc,
|
|
&sc->sp_objs[idx].q_obj,
|
|
fp->cl_id,
|
|
cids,
|
|
sc->max_cos,
|
|
SC_FUNC(sc),
|
|
BNX2X_SP(sc, q_rdata),
|
|
(rte_iova_t)BNX2X_SP_MAPPING(sc, q_rdata),
|
|
q_type);
|
|
|
|
/* configure classification DBs */
|
|
ecore_init_mac_obj(sc,
|
|
&sc->sp_objs[idx].mac_obj,
|
|
fp->cl_id,
|
|
idx,
|
|
SC_FUNC(sc),
|
|
BNX2X_SP(sc, mac_rdata),
|
|
(rte_iova_t)BNX2X_SP_MAPPING(sc, mac_rdata),
|
|
ECORE_FILTER_MAC_PENDING, &sc->sp_state,
|
|
ECORE_OBJ_TYPE_RX_TX, &sc->macs_pool);
|
|
}
|
|
|
|
static void
|
|
bnx2x_update_rx_prod(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
|
|
uint16_t rx_bd_prod, uint16_t rx_cq_prod)
|
|
{
|
|
struct ustorm_eth_rx_producers rx_prods;
|
|
uint32_t i;
|
|
|
|
memset(&rx_prods, 0, sizeof(rx_prods));
|
|
|
|
/* update producers */
|
|
rx_prods.bd_prod = rx_bd_prod;
|
|
rx_prods.cqe_prod = rx_cq_prod;
|
|
|
|
/*
|
|
* Make sure that the BD and SGE data is updated before updating the
|
|
* producers since FW might read the BD/SGE right after the producer
|
|
* is updated.
|
|
* This is only applicable for weak-ordered memory model archs such
|
|
* as IA-64. The following barrier is also mandatory since FW will
|
|
* assumes BDs must have buffers.
|
|
*/
|
|
wmb();
|
|
|
|
for (i = 0; i < (sizeof(rx_prods) / 4); i++) {
|
|
REG_WR(sc, (fp->ustorm_rx_prods_offset + (i * 4)),
|
|
((uint32_t *)&rx_prods)[i]);
|
|
}
|
|
|
|
wmb(); /* keep prod updates ordered */
|
|
}
|
|
|
|
static void bnx2x_init_rx_rings(struct bnx2x_softc *sc)
|
|
{
|
|
struct bnx2x_fastpath *fp;
|
|
int i;
|
|
struct bnx2x_rx_queue *rxq;
|
|
|
|
for (i = 0; i < sc->num_queues; i++) {
|
|
fp = &sc->fp[i];
|
|
rxq = sc->rx_queues[fp->index];
|
|
if (!rxq) {
|
|
PMD_RX_LOG(ERR, "RX queue is NULL");
|
|
return;
|
|
}
|
|
|
|
rxq->rx_bd_head = 0;
|
|
rxq->rx_bd_tail = rxq->nb_rx_desc;
|
|
rxq->rx_cq_head = 0;
|
|
rxq->rx_cq_tail = TOTAL_RCQ_ENTRIES(rxq);
|
|
*fp->rx_cq_cons_sb = 0;
|
|
|
|
/*
|
|
* Activate the BD ring...
|
|
* Warning, this will generate an interrupt (to the TSTORM)
|
|
* so this can only be done after the chip is initialized
|
|
*/
|
|
bnx2x_update_rx_prod(sc, fp, rxq->rx_bd_tail, rxq->rx_cq_tail);
|
|
|
|
if (i != 0) {
|
|
continue;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void bnx2x_init_tx_ring_one(struct bnx2x_fastpath *fp)
|
|
{
|
|
struct bnx2x_tx_queue *txq = fp->sc->tx_queues[fp->index];
|
|
|
|
fp->tx_db.data.header.header = 1 << DOORBELL_HDR_DB_TYPE_SHIFT;
|
|
fp->tx_db.data.zero_fill1 = 0;
|
|
fp->tx_db.data.prod = 0;
|
|
|
|
if (!txq) {
|
|
PMD_TX_LOG(ERR, "ERROR: TX queue is NULL");
|
|
return;
|
|
}
|
|
|
|
txq->tx_pkt_tail = 0;
|
|
txq->tx_pkt_head = 0;
|
|
txq->tx_bd_tail = 0;
|
|
txq->tx_bd_head = 0;
|
|
}
|
|
|
|
static void bnx2x_init_tx_rings(struct bnx2x_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < sc->num_queues; i++) {
|
|
bnx2x_init_tx_ring_one(&sc->fp[i]);
|
|
}
|
|
}
|
|
|
|
static void bnx2x_init_def_sb(struct bnx2x_softc *sc)
|
|
{
|
|
struct host_sp_status_block *def_sb = sc->def_sb;
|
|
rte_iova_t mapping = sc->def_sb_dma.paddr;
|
|
int igu_sp_sb_index;
|
|
int igu_seg_id;
|
|
int port = SC_PORT(sc);
|
|
int func = SC_FUNC(sc);
|
|
int reg_offset, reg_offset_en5;
|
|
uint64_t section;
|
|
int index, sindex;
|
|
struct hc_sp_status_block_data sp_sb_data;
|
|
|
|
memset(&sp_sb_data, 0, sizeof(struct hc_sp_status_block_data));
|
|
|
|
if (CHIP_INT_MODE_IS_BC(sc)) {
|
|
igu_sp_sb_index = DEF_SB_IGU_ID;
|
|
igu_seg_id = HC_SEG_ACCESS_DEF;
|
|
} else {
|
|
igu_sp_sb_index = sc->igu_dsb_id;
|
|
igu_seg_id = IGU_SEG_ACCESS_DEF;
|
|
}
|
|
|
|
/* attentions */
|
|
section = ((uint64_t) mapping +
|
|
offsetof(struct host_sp_status_block, atten_status_block));
|
|
def_sb->atten_status_block.status_block_id = igu_sp_sb_index;
|
|
sc->attn_state = 0;
|
|
|
|
reg_offset = (port) ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
|
|
MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0;
|
|
|
|
reg_offset_en5 = (port) ? MISC_REG_AEU_ENABLE5_FUNC_1_OUT_0 :
|
|
MISC_REG_AEU_ENABLE5_FUNC_0_OUT_0;
|
|
|
|
for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) {
|
|
/* take care of sig[0]..sig[4] */
|
|
for (sindex = 0; sindex < 4; sindex++) {
|
|
sc->attn_group[index].sig[sindex] =
|
|
REG_RD(sc,
|
|
(reg_offset + (sindex * 0x4) +
|
|
(0x10 * index)));
|
|
}
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
/*
|
|
* enable5 is separate from the rest of the registers,
|
|
* and the address skip is 4 and not 16 between the
|
|
* different groups
|
|
*/
|
|
sc->attn_group[index].sig[4] =
|
|
REG_RD(sc, (reg_offset_en5 + (0x4 * index)));
|
|
} else {
|
|
sc->attn_group[index].sig[4] = 0;
|
|
}
|
|
}
|
|
|
|
if (sc->devinfo.int_block == INT_BLOCK_HC) {
|
|
reg_offset =
|
|
port ? HC_REG_ATTN_MSG1_ADDR_L : HC_REG_ATTN_MSG0_ADDR_L;
|
|
REG_WR(sc, reg_offset, U64_LO(section));
|
|
REG_WR(sc, (reg_offset + 4), U64_HI(section));
|
|
} else if (!CHIP_IS_E1x(sc)) {
|
|
REG_WR(sc, IGU_REG_ATTN_MSG_ADDR_L, U64_LO(section));
|
|
REG_WR(sc, IGU_REG_ATTN_MSG_ADDR_H, U64_HI(section));
|
|
}
|
|
|
|
section = ((uint64_t) mapping +
|
|
offsetof(struct host_sp_status_block, sp_sb));
|
|
|
|
bnx2x_zero_sp_sb(sc);
|
|
|
|
/* PCI guarantees endianity of regpair */
|
|
sp_sb_data.state = SB_ENABLED;
|
|
sp_sb_data.host_sb_addr.lo = U64_LO(section);
|
|
sp_sb_data.host_sb_addr.hi = U64_HI(section);
|
|
sp_sb_data.igu_sb_id = igu_sp_sb_index;
|
|
sp_sb_data.igu_seg_id = igu_seg_id;
|
|
sp_sb_data.p_func.pf_id = func;
|
|
sp_sb_data.p_func.vnic_id = SC_VN(sc);
|
|
sp_sb_data.p_func.vf_id = 0xff;
|
|
|
|
bnx2x_wr_sp_sb_data(sc, &sp_sb_data);
|
|
|
|
bnx2x_ack_sb(sc, sc->igu_dsb_id, USTORM_ID, 0, IGU_INT_ENABLE, 0);
|
|
}
|
|
|
|
static void bnx2x_init_sp_ring(struct bnx2x_softc *sc)
|
|
{
|
|
atomic_store_rel_long(&sc->cq_spq_left, MAX_SPQ_PENDING);
|
|
sc->spq_prod_idx = 0;
|
|
sc->dsb_sp_prod =
|
|
&sc->def_sb->sp_sb.index_values[HC_SP_INDEX_ETH_DEF_CONS];
|
|
sc->spq_prod_bd = sc->spq;
|
|
sc->spq_last_bd = (sc->spq_prod_bd + MAX_SP_DESC_CNT);
|
|
}
|
|
|
|
static void bnx2x_init_eq_ring(struct bnx2x_softc *sc)
|
|
{
|
|
union event_ring_elem *elem;
|
|
int i;
|
|
|
|
for (i = 1; i <= NUM_EQ_PAGES; i++) {
|
|
elem = &sc->eq[EQ_DESC_CNT_PAGE * i - 1];
|
|
|
|
elem->next_page.addr.hi = htole32(U64_HI(sc->eq_dma.paddr +
|
|
BNX2X_PAGE_SIZE *
|
|
(i % NUM_EQ_PAGES)));
|
|
elem->next_page.addr.lo = htole32(U64_LO(sc->eq_dma.paddr +
|
|
BNX2X_PAGE_SIZE *
|
|
(i % NUM_EQ_PAGES)));
|
|
}
|
|
|
|
sc->eq_cons = 0;
|
|
sc->eq_prod = NUM_EQ_DESC;
|
|
sc->eq_cons_sb = &sc->def_sb->sp_sb.index_values[HC_SP_INDEX_EQ_CONS];
|
|
|
|
atomic_store_rel_long(&sc->eq_spq_left,
|
|
(min((MAX_SP_DESC_CNT - MAX_SPQ_PENDING),
|
|
NUM_EQ_DESC) - 1));
|
|
}
|
|
|
|
static void bnx2x_init_internal_common(struct bnx2x_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
/*
|
|
* Zero this manually as its initialization is currently missing
|
|
* in the initTool.
|
|
*/
|
|
for (i = 0; i < (USTORM_AGG_DATA_SIZE >> 2); i++) {
|
|
REG_WR(sc,
|
|
(BAR_USTRORM_INTMEM + USTORM_AGG_DATA_OFFSET + (i * 4)),
|
|
0);
|
|
}
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
REG_WR8(sc, (BAR_CSTRORM_INTMEM + CSTORM_IGU_MODE_OFFSET),
|
|
CHIP_INT_MODE_IS_BC(sc) ? HC_IGU_BC_MODE :
|
|
HC_IGU_NBC_MODE);
|
|
}
|
|
}
|
|
|
|
static void bnx2x_init_internal(struct bnx2x_softc *sc, uint32_t load_code)
|
|
{
|
|
switch (load_code) {
|
|
case FW_MSG_CODE_DRV_LOAD_COMMON:
|
|
case FW_MSG_CODE_DRV_LOAD_COMMON_CHIP:
|
|
bnx2x_init_internal_common(sc);
|
|
/* no break */
|
|
|
|
case FW_MSG_CODE_DRV_LOAD_PORT:
|
|
/* nothing to do */
|
|
/* no break */
|
|
|
|
case FW_MSG_CODE_DRV_LOAD_FUNCTION:
|
|
/* internal memory per function is initialized inside bnx2x_pf_init */
|
|
break;
|
|
|
|
default:
|
|
PMD_DRV_LOG(NOTICE, sc, "Unknown load_code (0x%x) from MCP",
|
|
load_code);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void
|
|
storm_memset_func_cfg(struct bnx2x_softc *sc,
|
|
struct tstorm_eth_function_common_config *tcfg,
|
|
uint16_t abs_fid)
|
|
{
|
|
uint32_t addr;
|
|
size_t size;
|
|
|
|
addr = (BAR_TSTRORM_INTMEM +
|
|
TSTORM_FUNCTION_COMMON_CONFIG_OFFSET(abs_fid));
|
|
size = sizeof(struct tstorm_eth_function_common_config);
|
|
ecore_storm_memset_struct(sc, addr, size, (uint32_t *) tcfg);
|
|
}
|
|
|
|
static void bnx2x_func_init(struct bnx2x_softc *sc, struct bnx2x_func_init_params *p)
|
|
{
|
|
struct tstorm_eth_function_common_config tcfg = { 0 };
|
|
|
|
if (CHIP_IS_E1x(sc)) {
|
|
storm_memset_func_cfg(sc, &tcfg, p->func_id);
|
|
}
|
|
|
|
/* Enable the function in the FW */
|
|
storm_memset_vf_to_pf(sc, p->func_id, p->pf_id);
|
|
storm_memset_func_en(sc, p->func_id, 1);
|
|
|
|
/* spq */
|
|
if (p->func_flgs & FUNC_FLG_SPQ) {
|
|
storm_memset_spq_addr(sc, p->spq_map, p->func_id);
|
|
REG_WR(sc,
|
|
(XSEM_REG_FAST_MEMORY +
|
|
XSTORM_SPQ_PROD_OFFSET(p->func_id)), p->spq_prod);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Calculates the sum of vn_min_rates.
|
|
* It's needed for further normalizing of the min_rates.
|
|
* Returns:
|
|
* sum of vn_min_rates.
|
|
* or
|
|
* 0 - if all the min_rates are 0.
|
|
* In the later case fainess algorithm should be deactivated.
|
|
* If all min rates are not zero then those that are zeroes will be set to 1.
|
|
*/
|
|
static void bnx2x_calc_vn_min(struct bnx2x_softc *sc, struct cmng_init_input *input)
|
|
{
|
|
uint32_t vn_cfg;
|
|
uint32_t vn_min_rate;
|
|
int all_zero = 1;
|
|
int vn;
|
|
|
|
for (vn = VN_0; vn < SC_MAX_VN_NUM(sc); vn++) {
|
|
vn_cfg = sc->devinfo.mf_info.mf_config[vn];
|
|
vn_min_rate = (((vn_cfg & FUNC_MF_CFG_MIN_BW_MASK) >>
|
|
FUNC_MF_CFG_MIN_BW_SHIFT) * 100);
|
|
|
|
if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE) {
|
|
/* skip hidden VNs */
|
|
vn_min_rate = 0;
|
|
} else if (!vn_min_rate) {
|
|
/* If min rate is zero - set it to 100 */
|
|
vn_min_rate = DEF_MIN_RATE;
|
|
} else {
|
|
all_zero = 0;
|
|
}
|
|
|
|
input->vnic_min_rate[vn] = vn_min_rate;
|
|
}
|
|
|
|
/* if ETS or all min rates are zeros - disable fairness */
|
|
if (all_zero) {
|
|
input->flags.cmng_enables &= ~CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
|
|
} else {
|
|
input->flags.cmng_enables |= CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
|
|
}
|
|
}
|
|
|
|
static uint16_t
|
|
bnx2x_extract_max_cfg(__rte_unused struct bnx2x_softc *sc, uint32_t mf_cfg)
|
|
{
|
|
uint16_t max_cfg = ((mf_cfg & FUNC_MF_CFG_MAX_BW_MASK) >>
|
|
FUNC_MF_CFG_MAX_BW_SHIFT);
|
|
|
|
if (!max_cfg) {
|
|
PMD_DRV_LOG(DEBUG, sc,
|
|
"Max BW configured to 0 - using 100 instead");
|
|
max_cfg = 100;
|
|
}
|
|
|
|
return max_cfg;
|
|
}
|
|
|
|
static void
|
|
bnx2x_calc_vn_max(struct bnx2x_softc *sc, int vn, struct cmng_init_input *input)
|
|
{
|
|
uint16_t vn_max_rate;
|
|
uint32_t vn_cfg = sc->devinfo.mf_info.mf_config[vn];
|
|
uint32_t max_cfg;
|
|
|
|
if (vn_cfg & FUNC_MF_CFG_FUNC_HIDE) {
|
|
vn_max_rate = 0;
|
|
} else {
|
|
max_cfg = bnx2x_extract_max_cfg(sc, vn_cfg);
|
|
|
|
if (IS_MF_SI(sc)) {
|
|
/* max_cfg in percents of linkspeed */
|
|
vn_max_rate =
|
|
((sc->link_vars.line_speed * max_cfg) / 100);
|
|
} else { /* SD modes */
|
|
/* max_cfg is absolute in 100Mb units */
|
|
vn_max_rate = (max_cfg * 100);
|
|
}
|
|
}
|
|
|
|
input->vnic_max_rate[vn] = vn_max_rate;
|
|
}
|
|
|
|
static void
|
|
bnx2x_cmng_fns_init(struct bnx2x_softc *sc, uint8_t read_cfg, uint8_t cmng_type)
|
|
{
|
|
struct cmng_init_input input;
|
|
int vn;
|
|
|
|
memset(&input, 0, sizeof(struct cmng_init_input));
|
|
|
|
input.port_rate = sc->link_vars.line_speed;
|
|
|
|
if (cmng_type == CMNG_FNS_MINMAX) {
|
|
/* read mf conf from shmem */
|
|
if (read_cfg) {
|
|
bnx2x_read_mf_cfg(sc);
|
|
}
|
|
|
|
/* get VN min rate and enable fairness if not 0 */
|
|
bnx2x_calc_vn_min(sc, &input);
|
|
|
|
/* get VN max rate */
|
|
if (sc->port.pmf) {
|
|
for (vn = VN_0; vn < SC_MAX_VN_NUM(sc); vn++) {
|
|
bnx2x_calc_vn_max(sc, vn, &input);
|
|
}
|
|
}
|
|
|
|
/* always enable rate shaping and fairness */
|
|
input.flags.cmng_enables |= CMNG_FLAGS_PER_PORT_RATE_SHAPING_VN;
|
|
|
|
ecore_init_cmng(&input, &sc->cmng);
|
|
return;
|
|
}
|
|
}
|
|
|
|
static int bnx2x_get_cmng_fns_mode(struct bnx2x_softc *sc)
|
|
{
|
|
if (CHIP_REV_IS_SLOW(sc)) {
|
|
return CMNG_FNS_NONE;
|
|
}
|
|
|
|
if (IS_MF(sc)) {
|
|
return CMNG_FNS_MINMAX;
|
|
}
|
|
|
|
return CMNG_FNS_NONE;
|
|
}
|
|
|
|
static void
|
|
storm_memset_cmng(struct bnx2x_softc *sc, struct cmng_init *cmng, uint8_t port)
|
|
{
|
|
int vn;
|
|
int func;
|
|
uint32_t addr;
|
|
size_t size;
|
|
|
|
addr = (BAR_XSTRORM_INTMEM + XSTORM_CMNG_PER_PORT_VARS_OFFSET(port));
|
|
size = sizeof(struct cmng_struct_per_port);
|
|
ecore_storm_memset_struct(sc, addr, size, (uint32_t *) & cmng->port);
|
|
|
|
for (vn = VN_0; vn < SC_MAX_VN_NUM(sc); vn++) {
|
|
func = func_by_vn(sc, vn);
|
|
|
|
addr = (BAR_XSTRORM_INTMEM +
|
|
XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(func));
|
|
size = sizeof(struct rate_shaping_vars_per_vn);
|
|
ecore_storm_memset_struct(sc, addr, size,
|
|
(uint32_t *) & cmng->
|
|
vnic.vnic_max_rate[vn]);
|
|
|
|
addr = (BAR_XSTRORM_INTMEM +
|
|
XSTORM_FAIRNESS_PER_VN_VARS_OFFSET(func));
|
|
size = sizeof(struct fairness_vars_per_vn);
|
|
ecore_storm_memset_struct(sc, addr, size,
|
|
(uint32_t *) & cmng->
|
|
vnic.vnic_min_rate[vn]);
|
|
}
|
|
}
|
|
|
|
static void bnx2x_pf_init(struct bnx2x_softc *sc)
|
|
{
|
|
struct bnx2x_func_init_params func_init;
|
|
struct event_ring_data eq_data;
|
|
uint16_t flags;
|
|
|
|
memset(&eq_data, 0, sizeof(struct event_ring_data));
|
|
memset(&func_init, 0, sizeof(struct bnx2x_func_init_params));
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
/* reset IGU PF statistics: MSIX + ATTN */
|
|
/* PF */
|
|
REG_WR(sc,
|
|
(IGU_REG_STATISTIC_NUM_MESSAGE_SENT +
|
|
(BNX2X_IGU_STAS_MSG_VF_CNT * 4) +
|
|
((CHIP_IS_MODE_4_PORT(sc) ? SC_FUNC(sc) : SC_VN(sc)) *
|
|
4)), 0);
|
|
/* ATTN */
|
|
REG_WR(sc,
|
|
(IGU_REG_STATISTIC_NUM_MESSAGE_SENT +
|
|
(BNX2X_IGU_STAS_MSG_VF_CNT * 4) +
|
|
(BNX2X_IGU_STAS_MSG_PF_CNT * 4) +
|
|
((CHIP_IS_MODE_4_PORT(sc) ? SC_FUNC(sc) : SC_VN(sc)) *
|
|
4)), 0);
|
|
}
|
|
|
|
/* function setup flags */
|
|
flags = (FUNC_FLG_STATS | FUNC_FLG_LEADING | FUNC_FLG_SPQ);
|
|
|
|
func_init.func_flgs = flags;
|
|
func_init.pf_id = SC_FUNC(sc);
|
|
func_init.func_id = SC_FUNC(sc);
|
|
func_init.spq_map = sc->spq_dma.paddr;
|
|
func_init.spq_prod = sc->spq_prod_idx;
|
|
|
|
bnx2x_func_init(sc, &func_init);
|
|
|
|
memset(&sc->cmng, 0, sizeof(struct cmng_struct_per_port));
|
|
|
|
/*
|
|
* Congestion management values depend on the link rate.
|
|
* There is no active link so initial link rate is set to 10Gbps.
|
|
* When the link comes up the congestion management values are
|
|
* re-calculated according to the actual link rate.
|
|
*/
|
|
sc->link_vars.line_speed = SPEED_10000;
|
|
bnx2x_cmng_fns_init(sc, TRUE, bnx2x_get_cmng_fns_mode(sc));
|
|
|
|
/* Only the PMF sets the HW */
|
|
if (sc->port.pmf) {
|
|
storm_memset_cmng(sc, &sc->cmng, SC_PORT(sc));
|
|
}
|
|
|
|
/* init Event Queue - PCI bus guarantees correct endainity */
|
|
eq_data.base_addr.hi = U64_HI(sc->eq_dma.paddr);
|
|
eq_data.base_addr.lo = U64_LO(sc->eq_dma.paddr);
|
|
eq_data.producer = sc->eq_prod;
|
|
eq_data.index_id = HC_SP_INDEX_EQ_CONS;
|
|
eq_data.sb_id = DEF_SB_ID;
|
|
storm_memset_eq_data(sc, &eq_data, SC_FUNC(sc));
|
|
}
|
|
|
|
static void bnx2x_hc_int_enable(struct bnx2x_softc *sc)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
uint32_t addr = (port) ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0;
|
|
uint32_t val = REG_RD(sc, addr);
|
|
uint8_t msix = (sc->interrupt_mode == INTR_MODE_MSIX)
|
|
|| (sc->interrupt_mode == INTR_MODE_SINGLE_MSIX);
|
|
uint8_t single_msix = (sc->interrupt_mode == INTR_MODE_SINGLE_MSIX);
|
|
uint8_t msi = (sc->interrupt_mode == INTR_MODE_MSI);
|
|
|
|
if (msix) {
|
|
val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
|
|
HC_CONFIG_0_REG_INT_LINE_EN_0);
|
|
val |= (HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
|
|
HC_CONFIG_0_REG_ATTN_BIT_EN_0);
|
|
if (single_msix) {
|
|
val |= HC_CONFIG_0_REG_SINGLE_ISR_EN_0;
|
|
}
|
|
} else if (msi) {
|
|
val &= ~HC_CONFIG_0_REG_INT_LINE_EN_0;
|
|
val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
|
|
HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
|
|
HC_CONFIG_0_REG_ATTN_BIT_EN_0);
|
|
} else {
|
|
val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
|
|
HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
|
|
HC_CONFIG_0_REG_INT_LINE_EN_0 |
|
|
HC_CONFIG_0_REG_ATTN_BIT_EN_0);
|
|
|
|
REG_WR(sc, addr, val);
|
|
|
|
val &= ~HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0;
|
|
}
|
|
|
|
REG_WR(sc, addr, val);
|
|
|
|
/* ensure that HC_CONFIG is written before leading/trailing edge config */
|
|
mb();
|
|
|
|
/* init leading/trailing edge */
|
|
if (IS_MF(sc)) {
|
|
val = (0xee0f | (1 << (SC_VN(sc) + 4)));
|
|
if (sc->port.pmf) {
|
|
/* enable nig and gpio3 attention */
|
|
val |= 0x1100;
|
|
}
|
|
} else {
|
|
val = 0xffff;
|
|
}
|
|
|
|
REG_WR(sc, (HC_REG_TRAILING_EDGE_0 + port * 8), val);
|
|
REG_WR(sc, (HC_REG_LEADING_EDGE_0 + port * 8), val);
|
|
|
|
/* make sure that interrupts are indeed enabled from here on */
|
|
mb();
|
|
}
|
|
|
|
static void bnx2x_igu_int_enable(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
uint8_t msix = (sc->interrupt_mode == INTR_MODE_MSIX)
|
|
|| (sc->interrupt_mode == INTR_MODE_SINGLE_MSIX);
|
|
uint8_t single_msix = (sc->interrupt_mode == INTR_MODE_SINGLE_MSIX);
|
|
uint8_t msi = (sc->interrupt_mode == INTR_MODE_MSI);
|
|
|
|
val = REG_RD(sc, IGU_REG_PF_CONFIGURATION);
|
|
|
|
if (msix) {
|
|
val &= ~(IGU_PF_CONF_INT_LINE_EN | IGU_PF_CONF_SINGLE_ISR_EN);
|
|
val |= (IGU_PF_CONF_MSI_MSIX_EN | IGU_PF_CONF_ATTN_BIT_EN);
|
|
if (single_msix) {
|
|
val |= IGU_PF_CONF_SINGLE_ISR_EN;
|
|
}
|
|
} else if (msi) {
|
|
val &= ~IGU_PF_CONF_INT_LINE_EN;
|
|
val |= (IGU_PF_CONF_MSI_MSIX_EN |
|
|
IGU_PF_CONF_ATTN_BIT_EN | IGU_PF_CONF_SINGLE_ISR_EN);
|
|
} else {
|
|
val &= ~IGU_PF_CONF_MSI_MSIX_EN;
|
|
val |= (IGU_PF_CONF_INT_LINE_EN |
|
|
IGU_PF_CONF_ATTN_BIT_EN | IGU_PF_CONF_SINGLE_ISR_EN);
|
|
}
|
|
|
|
/* clean previous status - need to configure igu prior to ack */
|
|
if ((!msix) || single_msix) {
|
|
REG_WR(sc, IGU_REG_PF_CONFIGURATION, val);
|
|
bnx2x_ack_int(sc);
|
|
}
|
|
|
|
val |= IGU_PF_CONF_FUNC_EN;
|
|
|
|
PMD_DRV_LOG(DEBUG, sc, "write 0x%x to IGU mode %s",
|
|
val, ((msix) ? "MSI-X" : ((msi) ? "MSI" : "INTx")));
|
|
|
|
REG_WR(sc, IGU_REG_PF_CONFIGURATION, val);
|
|
|
|
mb();
|
|
|
|
/* init leading/trailing edge */
|
|
if (IS_MF(sc)) {
|
|
val = (0xee0f | (1 << (SC_VN(sc) + 4)));
|
|
if (sc->port.pmf) {
|
|
/* enable nig and gpio3 attention */
|
|
val |= 0x1100;
|
|
}
|
|
} else {
|
|
val = 0xffff;
|
|
}
|
|
|
|
REG_WR(sc, IGU_REG_TRAILING_EDGE_LATCH, val);
|
|
REG_WR(sc, IGU_REG_LEADING_EDGE_LATCH, val);
|
|
|
|
/* make sure that interrupts are indeed enabled from here on */
|
|
mb();
|
|
}
|
|
|
|
static void bnx2x_int_enable(struct bnx2x_softc *sc)
|
|
{
|
|
if (sc->devinfo.int_block == INT_BLOCK_HC) {
|
|
bnx2x_hc_int_enable(sc);
|
|
} else {
|
|
bnx2x_igu_int_enable(sc);
|
|
}
|
|
}
|
|
|
|
static void bnx2x_hc_int_disable(struct bnx2x_softc *sc)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
uint32_t addr = (port) ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0;
|
|
uint32_t val = REG_RD(sc, addr);
|
|
|
|
val &= ~(HC_CONFIG_0_REG_SINGLE_ISR_EN_0 |
|
|
HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 |
|
|
HC_CONFIG_0_REG_INT_LINE_EN_0 | HC_CONFIG_0_REG_ATTN_BIT_EN_0);
|
|
/* flush all outstanding writes */
|
|
mb();
|
|
|
|
REG_WR(sc, addr, val);
|
|
if (REG_RD(sc, addr) != val) {
|
|
PMD_DRV_LOG(ERR, sc, "proper val not read from HC IGU!");
|
|
}
|
|
}
|
|
|
|
static void bnx2x_igu_int_disable(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t val = REG_RD(sc, IGU_REG_PF_CONFIGURATION);
|
|
|
|
val &= ~(IGU_PF_CONF_MSI_MSIX_EN |
|
|
IGU_PF_CONF_INT_LINE_EN | IGU_PF_CONF_ATTN_BIT_EN);
|
|
|
|
PMD_DRV_LOG(DEBUG, sc, "write %x to IGU", val);
|
|
|
|
/* flush all outstanding writes */
|
|
mb();
|
|
|
|
REG_WR(sc, IGU_REG_PF_CONFIGURATION, val);
|
|
if (REG_RD(sc, IGU_REG_PF_CONFIGURATION) != val) {
|
|
PMD_DRV_LOG(ERR, sc, "proper val not read from IGU!");
|
|
}
|
|
}
|
|
|
|
static void bnx2x_int_disable(struct bnx2x_softc *sc)
|
|
{
|
|
if (sc->devinfo.int_block == INT_BLOCK_HC) {
|
|
bnx2x_hc_int_disable(sc);
|
|
} else {
|
|
bnx2x_igu_int_disable(sc);
|
|
}
|
|
}
|
|
|
|
static void bnx2x_nic_init(struct bnx2x_softc *sc, int load_code)
|
|
{
|
|
int i;
|
|
|
|
PMD_INIT_FUNC_TRACE(sc);
|
|
|
|
for (i = 0; i < sc->num_queues; i++) {
|
|
bnx2x_init_eth_fp(sc, i);
|
|
}
|
|
|
|
rmb(); /* ensure status block indices were read */
|
|
|
|
bnx2x_init_rx_rings(sc);
|
|
bnx2x_init_tx_rings(sc);
|
|
|
|
if (IS_VF(sc)) {
|
|
bnx2x_memset_stats(sc);
|
|
return;
|
|
}
|
|
|
|
/* initialize MOD_ABS interrupts */
|
|
elink_init_mod_abs_int(sc, &sc->link_vars,
|
|
sc->devinfo.chip_id,
|
|
sc->devinfo.shmem_base,
|
|
sc->devinfo.shmem2_base, SC_PORT(sc));
|
|
|
|
bnx2x_init_def_sb(sc);
|
|
bnx2x_update_dsb_idx(sc);
|
|
bnx2x_init_sp_ring(sc);
|
|
bnx2x_init_eq_ring(sc);
|
|
bnx2x_init_internal(sc, load_code);
|
|
bnx2x_pf_init(sc);
|
|
bnx2x_stats_init(sc);
|
|
|
|
/* flush all before enabling interrupts */
|
|
mb();
|
|
|
|
bnx2x_int_enable(sc);
|
|
|
|
/* check for SPIO5 */
|
|
bnx2x_attn_int_deasserted0(sc,
|
|
REG_RD(sc,
|
|
(MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 +
|
|
SC_PORT(sc) * 4)) &
|
|
AEU_INPUTS_ATTN_BITS_SPIO5);
|
|
}
|
|
|
|
static void bnx2x_init_objs(struct bnx2x_softc *sc)
|
|
{
|
|
/* mcast rules must be added to tx if tx switching is enabled */
|
|
ecore_obj_type o_type;
|
|
if (sc->flags & BNX2X_TX_SWITCHING)
|
|
o_type = ECORE_OBJ_TYPE_RX_TX;
|
|
else
|
|
o_type = ECORE_OBJ_TYPE_RX;
|
|
|
|
/* RX_MODE controlling object */
|
|
ecore_init_rx_mode_obj(sc, &sc->rx_mode_obj);
|
|
|
|
/* multicast configuration controlling object */
|
|
ecore_init_mcast_obj(sc,
|
|
&sc->mcast_obj,
|
|
sc->fp[0].cl_id,
|
|
sc->fp[0].index,
|
|
SC_FUNC(sc),
|
|
SC_FUNC(sc),
|
|
BNX2X_SP(sc, mcast_rdata),
|
|
(rte_iova_t)BNX2X_SP_MAPPING(sc, mcast_rdata),
|
|
ECORE_FILTER_MCAST_PENDING,
|
|
&sc->sp_state, o_type);
|
|
|
|
/* Setup CAM credit pools */
|
|
ecore_init_mac_credit_pool(sc,
|
|
&sc->macs_pool,
|
|
SC_FUNC(sc),
|
|
CHIP_IS_E1x(sc) ? VNICS_PER_PORT(sc) :
|
|
VNICS_PER_PATH(sc));
|
|
|
|
ecore_init_vlan_credit_pool(sc,
|
|
&sc->vlans_pool,
|
|
SC_ABS_FUNC(sc) >> 1,
|
|
CHIP_IS_E1x(sc) ? VNICS_PER_PORT(sc) :
|
|
VNICS_PER_PATH(sc));
|
|
|
|
/* RSS configuration object */
|
|
ecore_init_rss_config_obj(sc, &sc->rss_conf_obj, sc->fp->cl_id,
|
|
sc->fp->index, SC_FUNC(sc), SC_FUNC(sc),
|
|
BNX2X_SP(sc, rss_rdata),
|
|
(rte_iova_t)BNX2X_SP_MAPPING(sc, rss_rdata),
|
|
ECORE_FILTER_RSS_CONF_PENDING, &sc->sp_state,
|
|
ECORE_OBJ_TYPE_RX);
|
|
}
|
|
|
|
/*
|
|
* Initialize the function. This must be called before sending CLIENT_SETUP
|
|
* for the first client.
|
|
*/
|
|
static int bnx2x_func_start(struct bnx2x_softc *sc)
|
|
{
|
|
struct ecore_func_state_params func_params = { NULL };
|
|
struct ecore_func_start_params *start_params =
|
|
&func_params.params.start;
|
|
|
|
/* Prepare parameters for function state transitions */
|
|
bnx2x_set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
|
|
|
|
func_params.f_obj = &sc->func_obj;
|
|
func_params.cmd = ECORE_F_CMD_START;
|
|
|
|
/* Function parameters */
|
|
start_params->mf_mode = sc->devinfo.mf_info.mf_mode;
|
|
start_params->sd_vlan_tag = OVLAN(sc);
|
|
|
|
if (CHIP_IS_E2(sc) || CHIP_IS_E3(sc)) {
|
|
start_params->network_cos_mode = STATIC_COS;
|
|
} else { /* CHIP_IS_E1X */
|
|
start_params->network_cos_mode = FW_WRR;
|
|
}
|
|
|
|
return ecore_func_state_change(sc, &func_params);
|
|
}
|
|
|
|
static int bnx2x_set_power_state(struct bnx2x_softc *sc, uint8_t state)
|
|
{
|
|
uint16_t pmcsr;
|
|
|
|
/* If there is no power capability, silently succeed */
|
|
if (!(sc->devinfo.pcie_cap_flags & BNX2X_PM_CAPABLE_FLAG)) {
|
|
PMD_DRV_LOG(INFO, sc, "No power capability");
|
|
return 0;
|
|
}
|
|
|
|
pci_read(sc, (sc->devinfo.pcie_pm_cap_reg + PCIR_POWER_STATUS), &pmcsr,
|
|
2);
|
|
|
|
switch (state) {
|
|
case PCI_PM_D0:
|
|
pci_write_word(sc,
|
|
(sc->devinfo.pcie_pm_cap_reg +
|
|
PCIR_POWER_STATUS),
|
|
((pmcsr & ~PCIM_PSTAT_DMASK) | PCIM_PSTAT_PME));
|
|
|
|
if (pmcsr & PCIM_PSTAT_DMASK) {
|
|
/* delay required during transition out of D3hot */
|
|
DELAY(20000);
|
|
}
|
|
|
|
break;
|
|
|
|
case PCI_PM_D3hot:
|
|
/* don't shut down the power for emulation and FPGA */
|
|
if (CHIP_REV_IS_SLOW(sc)) {
|
|
return 0;
|
|
}
|
|
|
|
pmcsr &= ~PCIM_PSTAT_DMASK;
|
|
pmcsr |= PCIM_PSTAT_D3;
|
|
|
|
if (sc->wol) {
|
|
pmcsr |= PCIM_PSTAT_PMEENABLE;
|
|
}
|
|
|
|
pci_write_long(sc,
|
|
(sc->devinfo.pcie_pm_cap_reg +
|
|
PCIR_POWER_STATUS), pmcsr);
|
|
|
|
/*
|
|
* No more memory access after this point until device is brought back
|
|
* to D0 state.
|
|
*/
|
|
break;
|
|
|
|
default:
|
|
PMD_DRV_LOG(NOTICE, sc, "Can't support PCI power state = %d",
|
|
state);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* return true if succeeded to acquire the lock */
|
|
static uint8_t bnx2x_trylock_hw_lock(struct bnx2x_softc *sc, uint32_t resource)
|
|
{
|
|
uint32_t lock_status;
|
|
uint32_t resource_bit = (1 << resource);
|
|
int func = SC_FUNC(sc);
|
|
uint32_t hw_lock_control_reg;
|
|
|
|
/* Validating that the resource is within range */
|
|
if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
|
|
PMD_DRV_LOG(INFO, sc,
|
|
"resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)",
|
|
resource, HW_LOCK_MAX_RESOURCE_VALUE);
|
|
return FALSE;
|
|
}
|
|
|
|
if (func <= 5) {
|
|
hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func * 8);
|
|
} else {
|
|
hw_lock_control_reg =
|
|
(MISC_REG_DRIVER_CONTROL_7 + (func - 6) * 8);
|
|
}
|
|
|
|
/* try to acquire the lock */
|
|
REG_WR(sc, hw_lock_control_reg + 4, resource_bit);
|
|
lock_status = REG_RD(sc, hw_lock_control_reg);
|
|
if (lock_status & resource_bit) {
|
|
return TRUE;
|
|
}
|
|
|
|
PMD_DRV_LOG(NOTICE, sc, "Failed to get a resource lock 0x%x", resource);
|
|
|
|
return FALSE;
|
|
}
|
|
|
|
/*
|
|
* Get the recovery leader resource id according to the engine this function
|
|
* belongs to. Currently only only 2 engines is supported.
|
|
*/
|
|
static int bnx2x_get_leader_lock_resource(struct bnx2x_softc *sc)
|
|
{
|
|
if (SC_PATH(sc)) {
|
|
return HW_LOCK_RESOURCE_RECOVERY_LEADER_1;
|
|
} else {
|
|
return HW_LOCK_RESOURCE_RECOVERY_LEADER_0;
|
|
}
|
|
}
|
|
|
|
/* try to acquire a leader lock for current engine */
|
|
static uint8_t bnx2x_trylock_leader_lock(struct bnx2x_softc *sc)
|
|
{
|
|
return bnx2x_trylock_hw_lock(sc, bnx2x_get_leader_lock_resource(sc));
|
|
}
|
|
|
|
static int bnx2x_release_leader_lock(struct bnx2x_softc *sc)
|
|
{
|
|
return bnx2x_release_hw_lock(sc, bnx2x_get_leader_lock_resource(sc));
|
|
}
|
|
|
|
/* close gates #2, #3 and #4 */
|
|
static void bnx2x_set_234_gates(struct bnx2x_softc *sc, uint8_t close)
|
|
{
|
|
uint32_t val;
|
|
|
|
/* gates #2 and #4a are closed/opened */
|
|
/* #4 */
|
|
REG_WR(sc, PXP_REG_HST_DISCARD_DOORBELLS, ! !close);
|
|
/* #2 */
|
|
REG_WR(sc, PXP_REG_HST_DISCARD_INTERNAL_WRITES, ! !close);
|
|
|
|
/* #3 */
|
|
if (CHIP_IS_E1x(sc)) {
|
|
/* prevent interrupts from HC on both ports */
|
|
val = REG_RD(sc, HC_REG_CONFIG_1);
|
|
if (close)
|
|
REG_WR(sc, HC_REG_CONFIG_1, (val & ~(uint32_t)
|
|
HC_CONFIG_1_REG_BLOCK_DISABLE_1));
|
|
else
|
|
REG_WR(sc, HC_REG_CONFIG_1,
|
|
(val | HC_CONFIG_1_REG_BLOCK_DISABLE_1));
|
|
|
|
val = REG_RD(sc, HC_REG_CONFIG_0);
|
|
if (close)
|
|
REG_WR(sc, HC_REG_CONFIG_0, (val & ~(uint32_t)
|
|
HC_CONFIG_0_REG_BLOCK_DISABLE_0));
|
|
else
|
|
REG_WR(sc, HC_REG_CONFIG_0,
|
|
(val | HC_CONFIG_0_REG_BLOCK_DISABLE_0));
|
|
|
|
} else {
|
|
/* Prevent incoming interrupts in IGU */
|
|
val = REG_RD(sc, IGU_REG_BLOCK_CONFIGURATION);
|
|
|
|
if (close)
|
|
REG_WR(sc, IGU_REG_BLOCK_CONFIGURATION,
|
|
(val & ~(uint32_t)
|
|
IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE));
|
|
else
|
|
REG_WR(sc, IGU_REG_BLOCK_CONFIGURATION,
|
|
(val |
|
|
IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE));
|
|
}
|
|
|
|
wmb();
|
|
}
|
|
|
|
/* poll for pending writes bit, it should get cleared in no more than 1s */
|
|
static int bnx2x_er_poll_igu_vq(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t cnt = 1000;
|
|
uint32_t pend_bits = 0;
|
|
|
|
do {
|
|
pend_bits = REG_RD(sc, IGU_REG_PENDING_BITS_STATUS);
|
|
|
|
if (pend_bits == 0) {
|
|
break;
|
|
}
|
|
|
|
DELAY(1000);
|
|
} while (cnt-- > 0);
|
|
|
|
if (cnt <= 0) {
|
|
PMD_DRV_LOG(NOTICE, sc, "Still pending IGU requests bits=0x%08x!",
|
|
pend_bits);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define SHARED_MF_CLP_MAGIC 0x80000000 /* 'magic' bit */
|
|
|
|
static void bnx2x_clp_reset_prep(struct bnx2x_softc *sc, uint32_t * magic_val)
|
|
{
|
|
/* Do some magic... */
|
|
uint32_t val = MFCFG_RD(sc, shared_mf_config.clp_mb);
|
|
*magic_val = val & SHARED_MF_CLP_MAGIC;
|
|
MFCFG_WR(sc, shared_mf_config.clp_mb, val | SHARED_MF_CLP_MAGIC);
|
|
}
|
|
|
|
/* restore the value of the 'magic' bit */
|
|
static void bnx2x_clp_reset_done(struct bnx2x_softc *sc, uint32_t magic_val)
|
|
{
|
|
/* Restore the 'magic' bit value... */
|
|
uint32_t val = MFCFG_RD(sc, shared_mf_config.clp_mb);
|
|
MFCFG_WR(sc, shared_mf_config.clp_mb,
|
|
(val & (~SHARED_MF_CLP_MAGIC)) | magic_val);
|
|
}
|
|
|
|
/* prepare for MCP reset, takes care of CLP configurations */
|
|
static void bnx2x_reset_mcp_prep(struct bnx2x_softc *sc, uint32_t * magic_val)
|
|
{
|
|
uint32_t shmem;
|
|
uint32_t validity_offset;
|
|
|
|
/* set `magic' bit in order to save MF config */
|
|
bnx2x_clp_reset_prep(sc, magic_val);
|
|
|
|
/* get shmem offset */
|
|
shmem = REG_RD(sc, MISC_REG_SHARED_MEM_ADDR);
|
|
validity_offset =
|
|
offsetof(struct shmem_region, validity_map[SC_PORT(sc)]);
|
|
|
|
/* Clear validity map flags */
|
|
if (shmem > 0) {
|
|
REG_WR(sc, shmem + validity_offset, 0);
|
|
}
|
|
}
|
|
|
|
#define MCP_TIMEOUT 5000 /* 5 seconds (in ms) */
|
|
#define MCP_ONE_TIMEOUT 100 /* 100 ms */
|
|
|
|
static void bnx2x_mcp_wait_one(struct bnx2x_softc *sc)
|
|
{
|
|
/* special handling for emulation and FPGA (10 times longer) */
|
|
if (CHIP_REV_IS_SLOW(sc)) {
|
|
DELAY((MCP_ONE_TIMEOUT * 10) * 1000);
|
|
} else {
|
|
DELAY((MCP_ONE_TIMEOUT) * 1000);
|
|
}
|
|
}
|
|
|
|
/* initialize shmem_base and waits for validity signature to appear */
|
|
static int bnx2x_init_shmem(struct bnx2x_softc *sc)
|
|
{
|
|
int cnt = 0;
|
|
uint32_t val = 0;
|
|
|
|
do {
|
|
sc->devinfo.shmem_base =
|
|
sc->link_params.shmem_base =
|
|
REG_RD(sc, MISC_REG_SHARED_MEM_ADDR);
|
|
|
|
if (sc->devinfo.shmem_base) {
|
|
val = SHMEM_RD(sc, validity_map[SC_PORT(sc)]);
|
|
if (val & SHR_MEM_VALIDITY_MB)
|
|
return 0;
|
|
}
|
|
|
|
bnx2x_mcp_wait_one(sc);
|
|
|
|
} while (cnt++ < (MCP_TIMEOUT / MCP_ONE_TIMEOUT));
|
|
|
|
PMD_DRV_LOG(NOTICE, sc, "BAD MCP validity signature");
|
|
|
|
return -1;
|
|
}
|
|
|
|
static int bnx2x_reset_mcp_comp(struct bnx2x_softc *sc, uint32_t magic_val)
|
|
{
|
|
int rc = bnx2x_init_shmem(sc);
|
|
|
|
/* Restore the `magic' bit value */
|
|
bnx2x_clp_reset_done(sc, magic_val);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void bnx2x_pxp_prep(struct bnx2x_softc *sc)
|
|
{
|
|
REG_WR(sc, PXP2_REG_RD_START_INIT, 0);
|
|
REG_WR(sc, PXP2_REG_RQ_RBC_DONE, 0);
|
|
wmb();
|
|
}
|
|
|
|
/*
|
|
* Reset the whole chip except for:
|
|
* - PCIE core
|
|
* - PCI Glue, PSWHST, PXP/PXP2 RF (all controlled by one reset bit)
|
|
* - IGU
|
|
* - MISC (including AEU)
|
|
* - GRC
|
|
* - RBCN, RBCP
|
|
*/
|
|
static void bnx2x_process_kill_chip_reset(struct bnx2x_softc *sc, uint8_t global)
|
|
{
|
|
uint32_t not_reset_mask1, reset_mask1, not_reset_mask2, reset_mask2;
|
|
uint32_t global_bits2, stay_reset2;
|
|
|
|
/*
|
|
* Bits that have to be set in reset_mask2 if we want to reset 'global'
|
|
* (per chip) blocks.
|
|
*/
|
|
global_bits2 =
|
|
MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CPU |
|
|
MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CORE;
|
|
|
|
/*
|
|
* Don't reset the following blocks.
|
|
* Important: per port blocks (such as EMAC, BMAC, UMAC) can't be
|
|
* reset, as in 4 port device they might still be owned
|
|
* by the MCP (there is only one leader per path).
|
|
*/
|
|
not_reset_mask1 =
|
|
MISC_REGISTERS_RESET_REG_1_RST_HC |
|
|
MISC_REGISTERS_RESET_REG_1_RST_PXPV |
|
|
MISC_REGISTERS_RESET_REG_1_RST_PXP;
|
|
|
|
not_reset_mask2 =
|
|
MISC_REGISTERS_RESET_REG_2_RST_PCI_MDIO |
|
|
MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE |
|
|
MISC_REGISTERS_RESET_REG_2_RST_EMAC1_HARD_CORE |
|
|
MISC_REGISTERS_RESET_REG_2_RST_MISC_CORE |
|
|
MISC_REGISTERS_RESET_REG_2_RST_RBCN |
|
|
MISC_REGISTERS_RESET_REG_2_RST_GRC |
|
|
MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_REG_HARD_CORE |
|
|
MISC_REGISTERS_RESET_REG_2_RST_MCP_N_HARD_CORE_RST_B |
|
|
MISC_REGISTERS_RESET_REG_2_RST_ATC |
|
|
MISC_REGISTERS_RESET_REG_2_PGLC |
|
|
MISC_REGISTERS_RESET_REG_2_RST_BMAC0 |
|
|
MISC_REGISTERS_RESET_REG_2_RST_BMAC1 |
|
|
MISC_REGISTERS_RESET_REG_2_RST_EMAC0 |
|
|
MISC_REGISTERS_RESET_REG_2_RST_EMAC1 |
|
|
MISC_REGISTERS_RESET_REG_2_UMAC0 | MISC_REGISTERS_RESET_REG_2_UMAC1;
|
|
|
|
/*
|
|
* Keep the following blocks in reset:
|
|
* - all xxMACs are handled by the elink code.
|
|
*/
|
|
stay_reset2 =
|
|
MISC_REGISTERS_RESET_REG_2_XMAC |
|
|
MISC_REGISTERS_RESET_REG_2_XMAC_SOFT;
|
|
|
|
/* Full reset masks according to the chip */
|
|
reset_mask1 = 0xffffffff;
|
|
|
|
if (CHIP_IS_E1H(sc))
|
|
reset_mask2 = 0x1ffff;
|
|
else if (CHIP_IS_E2(sc))
|
|
reset_mask2 = 0xfffff;
|
|
else /* CHIP_IS_E3 */
|
|
reset_mask2 = 0x3ffffff;
|
|
|
|
/* Don't reset global blocks unless we need to */
|
|
if (!global)
|
|
reset_mask2 &= ~global_bits2;
|
|
|
|
/*
|
|
* In case of attention in the QM, we need to reset PXP
|
|
* (MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR) before QM
|
|
* because otherwise QM reset would release 'close the gates' shortly
|
|
* before resetting the PXP, then the PSWRQ would send a write
|
|
* request to PGLUE. Then when PXP is reset, PGLUE would try to
|
|
* read the payload data from PSWWR, but PSWWR would not
|
|
* respond. The write queue in PGLUE would stuck, dmae commands
|
|
* would not return. Therefore it's important to reset the second
|
|
* reset register (containing the
|
|
* MISC_REGISTERS_RESET_REG_2_RST_PXP_RQ_RD_WR bit) before the
|
|
* first one (containing the MISC_REGISTERS_RESET_REG_1_RST_QM
|
|
* bit).
|
|
*/
|
|
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
|
|
reset_mask2 & (~not_reset_mask2));
|
|
|
|
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
|
|
reset_mask1 & (~not_reset_mask1));
|
|
|
|
mb();
|
|
wmb();
|
|
|
|
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
|
|
reset_mask2 & (~stay_reset2));
|
|
|
|
mb();
|
|
wmb();
|
|
|
|
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, reset_mask1);
|
|
wmb();
|
|
}
|
|
|
|
static int bnx2x_process_kill(struct bnx2x_softc *sc, uint8_t global)
|
|
{
|
|
int cnt = 1000;
|
|
uint32_t val = 0;
|
|
uint32_t sr_cnt, blk_cnt, port_is_idle_0, port_is_idle_1, pgl_exp_rom2;
|
|
uint32_t tags_63_32 = 0;
|
|
|
|
/* Empty the Tetris buffer, wait for 1s */
|
|
do {
|
|
sr_cnt = REG_RD(sc, PXP2_REG_RD_SR_CNT);
|
|
blk_cnt = REG_RD(sc, PXP2_REG_RD_BLK_CNT);
|
|
port_is_idle_0 = REG_RD(sc, PXP2_REG_RD_PORT_IS_IDLE_0);
|
|
port_is_idle_1 = REG_RD(sc, PXP2_REG_RD_PORT_IS_IDLE_1);
|
|
pgl_exp_rom2 = REG_RD(sc, PXP2_REG_PGL_EXP_ROM2);
|
|
if (CHIP_IS_E3(sc)) {
|
|
tags_63_32 = REG_RD(sc, PGLUE_B_REG_TAGS_63_32);
|
|
}
|
|
|
|
if ((sr_cnt == 0x7e) && (blk_cnt == 0xa0) &&
|
|
((port_is_idle_0 & 0x1) == 0x1) &&
|
|
((port_is_idle_1 & 0x1) == 0x1) &&
|
|
(pgl_exp_rom2 == 0xffffffff) &&
|
|
(!CHIP_IS_E3(sc) || (tags_63_32 == 0xffffffff)))
|
|
break;
|
|
DELAY(1000);
|
|
} while (cnt-- > 0);
|
|
|
|
if (cnt <= 0) {
|
|
PMD_DRV_LOG(NOTICE, sc,
|
|
"ERROR: Tetris buffer didn't get empty or there "
|
|
"are still outstanding read requests after 1s! "
|
|
"sr_cnt=0x%08x, blk_cnt=0x%08x, port_is_idle_0=0x%08x, "
|
|
"port_is_idle_1=0x%08x, pgl_exp_rom2=0x%08x",
|
|
sr_cnt, blk_cnt, port_is_idle_0, port_is_idle_1,
|
|
pgl_exp_rom2);
|
|
return -1;
|
|
}
|
|
|
|
mb();
|
|
|
|
/* Close gates #2, #3 and #4 */
|
|
bnx2x_set_234_gates(sc, TRUE);
|
|
|
|
/* Poll for IGU VQs for 57712 and newer chips */
|
|
if (!CHIP_IS_E1x(sc) && bnx2x_er_poll_igu_vq(sc)) {
|
|
return -1;
|
|
}
|
|
|
|
/* clear "unprepared" bit */
|
|
REG_WR(sc, MISC_REG_UNPREPARED, 0);
|
|
mb();
|
|
|
|
/* Make sure all is written to the chip before the reset */
|
|
wmb();
|
|
|
|
/*
|
|
* Wait for 1ms to empty GLUE and PCI-E core queues,
|
|
* PSWHST, GRC and PSWRD Tetris buffer.
|
|
*/
|
|
DELAY(1000);
|
|
|
|
/* Prepare to chip reset: */
|
|
/* MCP */
|
|
if (global) {
|
|
bnx2x_reset_mcp_prep(sc, &val);
|
|
}
|
|
|
|
/* PXP */
|
|
bnx2x_pxp_prep(sc);
|
|
mb();
|
|
|
|
/* reset the chip */
|
|
bnx2x_process_kill_chip_reset(sc, global);
|
|
mb();
|
|
|
|
/* Recover after reset: */
|
|
/* MCP */
|
|
if (global && bnx2x_reset_mcp_comp(sc, val)) {
|
|
return -1;
|
|
}
|
|
|
|
/* Open the gates #2, #3 and #4 */
|
|
bnx2x_set_234_gates(sc, FALSE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_leader_reset(struct bnx2x_softc *sc)
|
|
{
|
|
int rc = 0;
|
|
uint8_t global = bnx2x_reset_is_global(sc);
|
|
uint32_t load_code;
|
|
|
|
/*
|
|
* If not going to reset MCP, load "fake" driver to reset HW while
|
|
* driver is owner of the HW.
|
|
*/
|
|
if (!global && !BNX2X_NOMCP(sc)) {
|
|
load_code = bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_REQ,
|
|
DRV_MSG_CODE_LOAD_REQ_WITH_LFA);
|
|
if (!load_code) {
|
|
PMD_DRV_LOG(NOTICE, sc, "MCP response failure, aborting");
|
|
rc = -1;
|
|
goto exit_leader_reset;
|
|
}
|
|
|
|
if ((load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) &&
|
|
(load_code != FW_MSG_CODE_DRV_LOAD_COMMON)) {
|
|
PMD_DRV_LOG(NOTICE, sc,
|
|
"MCP unexpected response, aborting");
|
|
rc = -1;
|
|
goto exit_leader_reset2;
|
|
}
|
|
|
|
load_code = bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_DONE, 0);
|
|
if (!load_code) {
|
|
PMD_DRV_LOG(NOTICE, sc, "MCP response failure, aborting");
|
|
rc = -1;
|
|
goto exit_leader_reset2;
|
|
}
|
|
}
|
|
|
|
/* try to recover after the failure */
|
|
if (bnx2x_process_kill(sc, global)) {
|
|
PMD_DRV_LOG(NOTICE, sc, "Something bad occurred on engine %d!",
|
|
SC_PATH(sc));
|
|
rc = -1;
|
|
goto exit_leader_reset2;
|
|
}
|
|
|
|
/*
|
|
* Clear the RESET_IN_PROGRESS and RESET_GLOBAL bits and update the driver
|
|
* state.
|
|
*/
|
|
bnx2x_set_reset_done(sc);
|
|
if (global) {
|
|
bnx2x_clear_reset_global(sc);
|
|
}
|
|
|
|
exit_leader_reset2:
|
|
|
|
/* unload "fake driver" if it was loaded */
|
|
if (!global &&!BNX2X_NOMCP(sc)) {
|
|
bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP, 0);
|
|
bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_DONE, 0);
|
|
}
|
|
|
|
exit_leader_reset:
|
|
|
|
sc->is_leader = 0;
|
|
bnx2x_release_leader_lock(sc);
|
|
|
|
mb();
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* prepare INIT transition, parameters configured:
|
|
* - HC configuration
|
|
* - Queue's CDU context
|
|
*/
|
|
static void
|
|
bnx2x_pf_q_prep_init(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
|
|
struct ecore_queue_init_params *init_params)
|
|
{
|
|
uint8_t cos;
|
|
int cxt_index, cxt_offset;
|
|
|
|
bnx2x_set_bit(ECORE_Q_FLG_HC, &init_params->rx.flags);
|
|
bnx2x_set_bit(ECORE_Q_FLG_HC, &init_params->tx.flags);
|
|
|
|
bnx2x_set_bit(ECORE_Q_FLG_HC_EN, &init_params->rx.flags);
|
|
bnx2x_set_bit(ECORE_Q_FLG_HC_EN, &init_params->tx.flags);
|
|
|
|
/* HC rate */
|
|
init_params->rx.hc_rate =
|
|
sc->hc_rx_ticks ? (1000000 / sc->hc_rx_ticks) : 0;
|
|
init_params->tx.hc_rate =
|
|
sc->hc_tx_ticks ? (1000000 / sc->hc_tx_ticks) : 0;
|
|
|
|
/* FW SB ID */
|
|
init_params->rx.fw_sb_id = init_params->tx.fw_sb_id = fp->fw_sb_id;
|
|
|
|
/* CQ index among the SB indices */
|
|
init_params->rx.sb_cq_index = HC_INDEX_ETH_RX_CQ_CONS;
|
|
init_params->tx.sb_cq_index = HC_INDEX_ETH_FIRST_TX_CQ_CONS;
|
|
|
|
/* set maximum number of COSs supported by this queue */
|
|
init_params->max_cos = sc->max_cos;
|
|
|
|
/* set the context pointers queue object */
|
|
for (cos = FIRST_TX_COS_INDEX; cos < init_params->max_cos; cos++) {
|
|
cxt_index = fp->index / ILT_PAGE_CIDS;
|
|
cxt_offset = fp->index - (cxt_index * ILT_PAGE_CIDS);
|
|
init_params->cxts[cos] =
|
|
&sc->context[cxt_index].vcxt[cxt_offset].eth;
|
|
}
|
|
}
|
|
|
|
/* set flags that are common for the Tx-only and not normal connections */
|
|
static unsigned long
|
|
bnx2x_get_common_flags(struct bnx2x_softc *sc, uint8_t zero_stats)
|
|
{
|
|
unsigned long flags = 0;
|
|
|
|
/* PF driver will always initialize the Queue to an ACTIVE state */
|
|
bnx2x_set_bit(ECORE_Q_FLG_ACTIVE, &flags);
|
|
|
|
/*
|
|
* tx only connections collect statistics (on the same index as the
|
|
* parent connection). The statistics are zeroed when the parent
|
|
* connection is initialized.
|
|
*/
|
|
|
|
bnx2x_set_bit(ECORE_Q_FLG_STATS, &flags);
|
|
if (zero_stats) {
|
|
bnx2x_set_bit(ECORE_Q_FLG_ZERO_STATS, &flags);
|
|
}
|
|
|
|
/*
|
|
* tx only connections can support tx-switching, though their
|
|
* CoS-ness doesn't survive the loopback
|
|
*/
|
|
if (sc->flags & BNX2X_TX_SWITCHING) {
|
|
bnx2x_set_bit(ECORE_Q_FLG_TX_SWITCH, &flags);
|
|
}
|
|
|
|
bnx2x_set_bit(ECORE_Q_FLG_PCSUM_ON_PKT, &flags);
|
|
|
|
return flags;
|
|
}
|
|
|
|
static unsigned long bnx2x_get_q_flags(struct bnx2x_softc *sc, uint8_t leading)
|
|
{
|
|
unsigned long flags = 0;
|
|
|
|
if (IS_MF_SD(sc)) {
|
|
bnx2x_set_bit(ECORE_Q_FLG_OV, &flags);
|
|
}
|
|
|
|
if (leading) {
|
|
bnx2x_set_bit(ECORE_Q_FLG_LEADING_RSS, &flags);
|
|
bnx2x_set_bit(ECORE_Q_FLG_MCAST, &flags);
|
|
}
|
|
|
|
bnx2x_set_bit(ECORE_Q_FLG_VLAN, &flags);
|
|
|
|
/* merge with common flags */
|
|
return flags | bnx2x_get_common_flags(sc, TRUE);
|
|
}
|
|
|
|
static void
|
|
bnx2x_pf_q_prep_general(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
|
|
struct ecore_general_setup_params *gen_init, uint8_t cos)
|
|
{
|
|
gen_init->stat_id = bnx2x_stats_id(fp);
|
|
gen_init->spcl_id = fp->cl_id;
|
|
gen_init->mtu = sc->mtu;
|
|
gen_init->cos = cos;
|
|
}
|
|
|
|
static void
|
|
bnx2x_pf_rx_q_prep(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
|
|
struct rxq_pause_params *pause,
|
|
struct ecore_rxq_setup_params *rxq_init)
|
|
{
|
|
struct bnx2x_rx_queue *rxq;
|
|
|
|
rxq = sc->rx_queues[fp->index];
|
|
if (!rxq) {
|
|
PMD_RX_LOG(ERR, "RX queue is NULL");
|
|
return;
|
|
}
|
|
/* pause */
|
|
pause->bd_th_lo = BD_TH_LO(sc);
|
|
pause->bd_th_hi = BD_TH_HI(sc);
|
|
|
|
pause->rcq_th_lo = RCQ_TH_LO(sc);
|
|
pause->rcq_th_hi = RCQ_TH_HI(sc);
|
|
|
|
/* validate rings have enough entries to cross high thresholds */
|
|
if (sc->dropless_fc &&
|
|
pause->bd_th_hi + FW_PREFETCH_CNT > sc->rx_ring_size) {
|
|
PMD_DRV_LOG(WARNING, sc, "rx bd ring threshold limit");
|
|
}
|
|
|
|
if (sc->dropless_fc &&
|
|
pause->rcq_th_hi + FW_PREFETCH_CNT > USABLE_RCQ_ENTRIES(rxq)) {
|
|
PMD_DRV_LOG(WARNING, sc, "rcq ring threshold limit");
|
|
}
|
|
|
|
pause->pri_map = 1;
|
|
|
|
/* rxq setup */
|
|
rxq_init->dscr_map = (rte_iova_t)rxq->rx_ring_phys_addr;
|
|
rxq_init->rcq_map = (rte_iova_t)rxq->cq_ring_phys_addr;
|
|
rxq_init->rcq_np_map = (rte_iova_t)(rxq->cq_ring_phys_addr +
|
|
BNX2X_PAGE_SIZE);
|
|
|
|
/*
|
|
* This should be a maximum number of data bytes that may be
|
|
* placed on the BD (not including paddings).
|
|
*/
|
|
rxq_init->buf_sz = (fp->rx_buf_size - IP_HEADER_ALIGNMENT_PADDING);
|
|
|
|
rxq_init->cl_qzone_id = fp->cl_qzone_id;
|
|
rxq_init->rss_engine_id = SC_FUNC(sc);
|
|
rxq_init->mcast_engine_id = SC_FUNC(sc);
|
|
|
|
rxq_init->cache_line_log = BNX2X_RX_ALIGN_SHIFT;
|
|
rxq_init->fw_sb_id = fp->fw_sb_id;
|
|
|
|
rxq_init->sb_cq_index = HC_INDEX_ETH_RX_CQ_CONS;
|
|
|
|
/*
|
|
* configure silent vlan removal
|
|
* if multi function mode is afex, then mask default vlan
|
|
*/
|
|
if (IS_MF_AFEX(sc)) {
|
|
rxq_init->silent_removal_value =
|
|
sc->devinfo.mf_info.afex_def_vlan_tag;
|
|
rxq_init->silent_removal_mask = EVL_VLID_MASK;
|
|
}
|
|
}
|
|
|
|
static void
|
|
bnx2x_pf_tx_q_prep(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp,
|
|
struct ecore_txq_setup_params *txq_init, uint8_t cos)
|
|
{
|
|
struct bnx2x_tx_queue *txq = fp->sc->tx_queues[fp->index];
|
|
|
|
if (!txq) {
|
|
PMD_TX_LOG(ERR, "ERROR: TX queue is NULL");
|
|
return;
|
|
}
|
|
txq_init->dscr_map = (rte_iova_t)txq->tx_ring_phys_addr;
|
|
txq_init->sb_cq_index = HC_INDEX_ETH_FIRST_TX_CQ_CONS + cos;
|
|
txq_init->traffic_type = LLFC_TRAFFIC_TYPE_NW;
|
|
txq_init->fw_sb_id = fp->fw_sb_id;
|
|
|
|
/*
|
|
* set the TSS leading client id for TX classfication to the
|
|
* leading RSS client id
|
|
*/
|
|
txq_init->tss_leading_cl_id = BNX2X_FP(sc, 0, cl_id);
|
|
}
|
|
|
|
/*
|
|
* This function performs 2 steps in a queue state machine:
|
|
* 1) RESET->INIT
|
|
* 2) INIT->SETUP
|
|
*/
|
|
static int
|
|
bnx2x_setup_queue(struct bnx2x_softc *sc, struct bnx2x_fastpath *fp, uint8_t leading)
|
|
{
|
|
struct ecore_queue_state_params q_params = { NULL };
|
|
struct ecore_queue_setup_params *setup_params = &q_params.params.setup;
|
|
int rc;
|
|
|
|
PMD_DRV_LOG(DEBUG, sc, "setting up queue %d", fp->index);
|
|
|
|
bnx2x_ack_sb(sc, fp->igu_sb_id, USTORM_ID, 0, IGU_INT_ENABLE, 0);
|
|
|
|
q_params.q_obj = &BNX2X_SP_OBJ(sc, fp).q_obj;
|
|
|
|
/* we want to wait for completion in this context */
|
|
bnx2x_set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags);
|
|
|
|
/* prepare the INIT parameters */
|
|
bnx2x_pf_q_prep_init(sc, fp, &q_params.params.init);
|
|
|
|
/* Set the command */
|
|
q_params.cmd = ECORE_Q_CMD_INIT;
|
|
|
|
/* Change the state to INIT */
|
|
rc = ecore_queue_state_change(sc, &q_params);
|
|
if (rc) {
|
|
PMD_DRV_LOG(NOTICE, sc, "Queue(%d) INIT failed", fp->index);
|
|
return rc;
|
|
}
|
|
|
|
PMD_DRV_LOG(DEBUG, sc, "init complete");
|
|
|
|
/* now move the Queue to the SETUP state */
|
|
memset(setup_params, 0, sizeof(*setup_params));
|
|
|
|
/* set Queue flags */
|
|
setup_params->flags = bnx2x_get_q_flags(sc, leading);
|
|
|
|
/* set general SETUP parameters */
|
|
bnx2x_pf_q_prep_general(sc, fp, &setup_params->gen_params,
|
|
FIRST_TX_COS_INDEX);
|
|
|
|
bnx2x_pf_rx_q_prep(sc, fp,
|
|
&setup_params->pause_params,
|
|
&setup_params->rxq_params);
|
|
|
|
bnx2x_pf_tx_q_prep(sc, fp, &setup_params->txq_params, FIRST_TX_COS_INDEX);
|
|
|
|
/* Set the command */
|
|
q_params.cmd = ECORE_Q_CMD_SETUP;
|
|
|
|
/* change the state to SETUP */
|
|
rc = ecore_queue_state_change(sc, &q_params);
|
|
if (rc) {
|
|
PMD_DRV_LOG(NOTICE, sc, "Queue(%d) SETUP failed", fp->index);
|
|
return rc;
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int bnx2x_setup_leading(struct bnx2x_softc *sc)
|
|
{
|
|
if (IS_PF(sc))
|
|
return bnx2x_setup_queue(sc, &sc->fp[0], TRUE);
|
|
else /* VF */
|
|
return bnx2x_vf_setup_queue(sc, &sc->fp[0], TRUE);
|
|
}
|
|
|
|
static int
|
|
bnx2x_config_rss_pf(struct bnx2x_softc *sc, struct ecore_rss_config_obj *rss_obj,
|
|
uint8_t config_hash)
|
|
{
|
|
struct ecore_config_rss_params params = { NULL };
|
|
uint32_t i;
|
|
|
|
/*
|
|
* Although RSS is meaningless when there is a single HW queue we
|
|
* still need it enabled in order to have HW Rx hash generated.
|
|
*/
|
|
|
|
params.rss_obj = rss_obj;
|
|
|
|
bnx2x_set_bit(RAMROD_COMP_WAIT, ¶ms.ramrod_flags);
|
|
|
|
bnx2x_set_bit(ECORE_RSS_MODE_REGULAR, ¶ms.rss_flags);
|
|
|
|
/* RSS configuration */
|
|
bnx2x_set_bit(ECORE_RSS_IPV4, ¶ms.rss_flags);
|
|
bnx2x_set_bit(ECORE_RSS_IPV4_TCP, ¶ms.rss_flags);
|
|
bnx2x_set_bit(ECORE_RSS_IPV6, ¶ms.rss_flags);
|
|
bnx2x_set_bit(ECORE_RSS_IPV6_TCP, ¶ms.rss_flags);
|
|
if (rss_obj->udp_rss_v4) {
|
|
bnx2x_set_bit(ECORE_RSS_IPV4_UDP, ¶ms.rss_flags);
|
|
}
|
|
if (rss_obj->udp_rss_v6) {
|
|
bnx2x_set_bit(ECORE_RSS_IPV6_UDP, ¶ms.rss_flags);
|
|
}
|
|
|
|
/* Hash bits */
|
|
params.rss_result_mask = MULTI_MASK;
|
|
|
|
rte_memcpy(params.ind_table, rss_obj->ind_table,
|
|
sizeof(params.ind_table));
|
|
|
|
if (config_hash) {
|
|
/* RSS keys */
|
|
for (i = 0; i < sizeof(params.rss_key) / 4; i++) {
|
|
params.rss_key[i] = (uint32_t) rte_rand();
|
|
}
|
|
|
|
bnx2x_set_bit(ECORE_RSS_SET_SRCH, ¶ms.rss_flags);
|
|
}
|
|
|
|
if (IS_PF(sc))
|
|
return ecore_config_rss(sc, ¶ms);
|
|
else
|
|
return bnx2x_vf_config_rss(sc, ¶ms);
|
|
}
|
|
|
|
static int bnx2x_config_rss_eth(struct bnx2x_softc *sc, uint8_t config_hash)
|
|
{
|
|
return bnx2x_config_rss_pf(sc, &sc->rss_conf_obj, config_hash);
|
|
}
|
|
|
|
static int bnx2x_init_rss_pf(struct bnx2x_softc *sc)
|
|
{
|
|
uint8_t num_eth_queues = BNX2X_NUM_ETH_QUEUES(sc);
|
|
uint32_t i;
|
|
|
|
/*
|
|
* Prepare the initial contents of the indirection table if
|
|
* RSS is enabled
|
|
*/
|
|
for (i = 0; i < sizeof(sc->rss_conf_obj.ind_table); i++) {
|
|
sc->rss_conf_obj.ind_table[i] =
|
|
(sc->fp->cl_id + (i % num_eth_queues));
|
|
}
|
|
|
|
if (sc->udp_rss) {
|
|
sc->rss_conf_obj.udp_rss_v4 = sc->rss_conf_obj.udp_rss_v6 = 1;
|
|
}
|
|
|
|
/*
|
|
* For 57711 SEARCHER configuration (rss_keys) is
|
|
* per-port, so if explicit configuration is needed, do it only
|
|
* for a PMF.
|
|
*
|
|
* For 57712 and newer it's a per-function configuration.
|
|
*/
|
|
return bnx2x_config_rss_eth(sc, sc->port.pmf || !CHIP_IS_E1x(sc));
|
|
}
|
|
|
|
static int
|
|
bnx2x_set_mac_one(struct bnx2x_softc *sc, uint8_t * mac,
|
|
struct ecore_vlan_mac_obj *obj, uint8_t set, int mac_type,
|
|
unsigned long *ramrod_flags)
|
|
{
|
|
struct ecore_vlan_mac_ramrod_params ramrod_param;
|
|
int rc;
|
|
|
|
memset(&ramrod_param, 0, sizeof(ramrod_param));
|
|
|
|
/* fill in general parameters */
|
|
ramrod_param.vlan_mac_obj = obj;
|
|
ramrod_param.ramrod_flags = *ramrod_flags;
|
|
|
|
/* fill a user request section if needed */
|
|
if (!bnx2x_test_bit(RAMROD_CONT, ramrod_flags)) {
|
|
rte_memcpy(ramrod_param.user_req.u.mac.mac, mac,
|
|
ETH_ALEN);
|
|
|
|
bnx2x_set_bit(mac_type, &ramrod_param.user_req.vlan_mac_flags);
|
|
|
|
/* Set the command: ADD or DEL */
|
|
ramrod_param.user_req.cmd = (set) ? ECORE_VLAN_MAC_ADD :
|
|
ECORE_VLAN_MAC_DEL;
|
|
}
|
|
|
|
rc = ecore_config_vlan_mac(sc, &ramrod_param);
|
|
|
|
if (rc == ECORE_EXISTS) {
|
|
PMD_DRV_LOG(INFO, sc, "Failed to schedule ADD operations (EEXIST)");
|
|
/* do not treat adding same MAC as error */
|
|
rc = 0;
|
|
} else if (rc < 0) {
|
|
PMD_DRV_LOG(ERR, sc,
|
|
"%s MAC failed (%d)", (set ? "Set" : "Delete"), rc);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int bnx2x_set_eth_mac(struct bnx2x_softc *sc, uint8_t set)
|
|
{
|
|
unsigned long ramrod_flags = 0;
|
|
|
|
PMD_DRV_LOG(DEBUG, sc, "Adding Ethernet MAC");
|
|
|
|
bnx2x_set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
|
|
|
|
/* Eth MAC is set on RSS leading client (fp[0]) */
|
|
return bnx2x_set_mac_one(sc, sc->link_params.mac_addr,
|
|
&sc->sp_objs->mac_obj,
|
|
set, ECORE_ETH_MAC, &ramrod_flags);
|
|
}
|
|
|
|
static int bnx2x_get_cur_phy_idx(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t sel_phy_idx = 0;
|
|
|
|
if (sc->link_params.num_phys <= 1) {
|
|
return ELINK_INT_PHY;
|
|
}
|
|
|
|
if (sc->link_vars.link_up) {
|
|
sel_phy_idx = ELINK_EXT_PHY1;
|
|
/* In case link is SERDES, check if the ELINK_EXT_PHY2 is the one */
|
|
if ((sc->link_vars.link_status & LINK_STATUS_SERDES_LINK) &&
|
|
(sc->link_params.phy[ELINK_EXT_PHY2].supported &
|
|
ELINK_SUPPORTED_FIBRE))
|
|
sel_phy_idx = ELINK_EXT_PHY2;
|
|
} else {
|
|
switch (elink_phy_selection(&sc->link_params)) {
|
|
case PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT:
|
|
case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY:
|
|
case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY:
|
|
sel_phy_idx = ELINK_EXT_PHY1;
|
|
break;
|
|
case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY:
|
|
case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY:
|
|
sel_phy_idx = ELINK_EXT_PHY2;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return sel_phy_idx;
|
|
}
|
|
|
|
static int bnx2x_get_link_cfg_idx(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t sel_phy_idx = bnx2x_get_cur_phy_idx(sc);
|
|
|
|
/*
|
|
* The selected activated PHY is always after swapping (in case PHY
|
|
* swapping is enabled). So when swapping is enabled, we need to reverse
|
|
* the configuration
|
|
*/
|
|
|
|
if (sc->link_params.multi_phy_config & PORT_HW_CFG_PHY_SWAPPED_ENABLED) {
|
|
if (sel_phy_idx == ELINK_EXT_PHY1)
|
|
sel_phy_idx = ELINK_EXT_PHY2;
|
|
else if (sel_phy_idx == ELINK_EXT_PHY2)
|
|
sel_phy_idx = ELINK_EXT_PHY1;
|
|
}
|
|
|
|
return ELINK_LINK_CONFIG_IDX(sel_phy_idx);
|
|
}
|
|
|
|
static void bnx2x_set_requested_fc(struct bnx2x_softc *sc)
|
|
{
|
|
/*
|
|
* Initialize link parameters structure variables
|
|
* It is recommended to turn off RX FC for jumbo frames
|
|
* for better performance
|
|
*/
|
|
if (CHIP_IS_E1x(sc) && (sc->mtu > 5000)) {
|
|
sc->link_params.req_fc_auto_adv = ELINK_FLOW_CTRL_TX;
|
|
} else {
|
|
sc->link_params.req_fc_auto_adv = ELINK_FLOW_CTRL_BOTH;
|
|
}
|
|
}
|
|
|
|
static void bnx2x_calc_fc_adv(struct bnx2x_softc *sc)
|
|
{
|
|
uint8_t cfg_idx = bnx2x_get_link_cfg_idx(sc);
|
|
switch (sc->link_vars.ieee_fc &
|
|
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK) {
|
|
case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE:
|
|
default:
|
|
sc->port.advertising[cfg_idx] &= ~(ADVERTISED_Asym_Pause |
|
|
ADVERTISED_Pause);
|
|
break;
|
|
|
|
case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH:
|
|
sc->port.advertising[cfg_idx] |= (ADVERTISED_Asym_Pause |
|
|
ADVERTISED_Pause);
|
|
break;
|
|
|
|
case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC:
|
|
sc->port.advertising[cfg_idx] |= ADVERTISED_Asym_Pause;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static uint16_t bnx2x_get_mf_speed(struct bnx2x_softc *sc)
|
|
{
|
|
uint16_t line_speed = sc->link_vars.line_speed;
|
|
if (IS_MF(sc)) {
|
|
uint16_t maxCfg = bnx2x_extract_max_cfg(sc,
|
|
sc->devinfo.
|
|
mf_info.mf_config[SC_VN
|
|
(sc)]);
|
|
|
|
/* calculate the current MAX line speed limit for the MF devices */
|
|
if (IS_MF_SI(sc)) {
|
|
line_speed = (line_speed * maxCfg) / 100;
|
|
} else { /* SD mode */
|
|
uint16_t vn_max_rate = maxCfg * 100;
|
|
|
|
if (vn_max_rate < line_speed) {
|
|
line_speed = vn_max_rate;
|
|
}
|
|
}
|
|
}
|
|
|
|
return line_speed;
|
|
}
|
|
|
|
static void
|
|
bnx2x_fill_report_data(struct bnx2x_softc *sc, struct bnx2x_link_report_data *data)
|
|
{
|
|
uint16_t line_speed = bnx2x_get_mf_speed(sc);
|
|
|
|
memset(data, 0, sizeof(*data));
|
|
|
|
/* fill the report data with the effective line speed */
|
|
data->line_speed = line_speed;
|
|
|
|
/* Link is down */
|
|
if (!sc->link_vars.link_up || (sc->flags & BNX2X_MF_FUNC_DIS)) {
|
|
bnx2x_set_bit(BNX2X_LINK_REPORT_LINK_DOWN,
|
|
&data->link_report_flags);
|
|
}
|
|
|
|
/* Full DUPLEX */
|
|
if (sc->link_vars.duplex == DUPLEX_FULL) {
|
|
bnx2x_set_bit(BNX2X_LINK_REPORT_FULL_DUPLEX,
|
|
&data->link_report_flags);
|
|
}
|
|
|
|
/* Rx Flow Control is ON */
|
|
if (sc->link_vars.flow_ctrl & ELINK_FLOW_CTRL_RX) {
|
|
bnx2x_set_bit(BNX2X_LINK_REPORT_RX_FC_ON, &data->link_report_flags);
|
|
}
|
|
|
|
/* Tx Flow Control is ON */
|
|
if (sc->link_vars.flow_ctrl & ELINK_FLOW_CTRL_TX) {
|
|
bnx2x_set_bit(BNX2X_LINK_REPORT_TX_FC_ON, &data->link_report_flags);
|
|
}
|
|
}
|
|
|
|
/* report link status to OS, should be called under phy_lock */
|
|
static void bnx2x_link_report_locked(struct bnx2x_softc *sc)
|
|
{
|
|
struct bnx2x_link_report_data cur_data;
|
|
|
|
/* reread mf_cfg */
|
|
if (IS_PF(sc)) {
|
|
bnx2x_read_mf_cfg(sc);
|
|
}
|
|
|
|
/* Read the current link report info */
|
|
bnx2x_fill_report_data(sc, &cur_data);
|
|
|
|
/* Don't report link down or exactly the same link status twice */
|
|
if (!memcmp(&cur_data, &sc->last_reported_link, sizeof(cur_data)) ||
|
|
(bnx2x_test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
|
|
&sc->last_reported_link.link_report_flags) &&
|
|
bnx2x_test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
|
|
&cur_data.link_report_flags))) {
|
|
return;
|
|
}
|
|
|
|
ELINK_DEBUG_P2(sc, "Change in link status : cur_data = %lx, last_reported_link = %lx",
|
|
cur_data.link_report_flags,
|
|
sc->last_reported_link.link_report_flags);
|
|
|
|
sc->link_cnt++;
|
|
|
|
ELINK_DEBUG_P1(sc, "link status change count = %x", sc->link_cnt);
|
|
/* report new link params and remember the state for the next time */
|
|
rte_memcpy(&sc->last_reported_link, &cur_data, sizeof(cur_data));
|
|
|
|
if (bnx2x_test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
|
|
&cur_data.link_report_flags)) {
|
|
ELINK_DEBUG_P0(sc, "NIC Link is Down");
|
|
} else {
|
|
__rte_unused const char *duplex;
|
|
__rte_unused const char *flow;
|
|
|
|
if (bnx2x_test_and_clear_bit(BNX2X_LINK_REPORT_FULL_DUPLEX,
|
|
&cur_data.link_report_flags)) {
|
|
duplex = "full";
|
|
ELINK_DEBUG_P0(sc, "link set to full duplex");
|
|
} else {
|
|
duplex = "half";
|
|
ELINK_DEBUG_P0(sc, "link set to half duplex");
|
|
}
|
|
|
|
/*
|
|
* Handle the FC at the end so that only these flags would be
|
|
* possibly set. This way we may easily check if there is no FC
|
|
* enabled.
|
|
*/
|
|
if (cur_data.link_report_flags) {
|
|
if (bnx2x_test_bit(BNX2X_LINK_REPORT_RX_FC_ON,
|
|
&cur_data.link_report_flags) &&
|
|
bnx2x_test_bit(BNX2X_LINK_REPORT_TX_FC_ON,
|
|
&cur_data.link_report_flags)) {
|
|
flow = "ON - receive & transmit";
|
|
} else if (bnx2x_test_bit(BNX2X_LINK_REPORT_RX_FC_ON,
|
|
&cur_data.link_report_flags) &&
|
|
!bnx2x_test_bit(BNX2X_LINK_REPORT_TX_FC_ON,
|
|
&cur_data.link_report_flags)) {
|
|
flow = "ON - receive";
|
|
} else if (!bnx2x_test_bit(BNX2X_LINK_REPORT_RX_FC_ON,
|
|
&cur_data.link_report_flags) &&
|
|
bnx2x_test_bit(BNX2X_LINK_REPORT_TX_FC_ON,
|
|
&cur_data.link_report_flags)) {
|
|
flow = "ON - transmit";
|
|
} else {
|
|
flow = "none"; /* possible? */
|
|
}
|
|
} else {
|
|
flow = "none";
|
|
}
|
|
|
|
PMD_DRV_LOG(INFO, sc,
|
|
"NIC Link is Up, %d Mbps %s duplex, Flow control: %s",
|
|
cur_data.line_speed, duplex, flow);
|
|
}
|
|
}
|
|
|
|
static void
|
|
bnx2x_link_report(struct bnx2x_softc *sc)
|
|
{
|
|
bnx2x_acquire_phy_lock(sc);
|
|
bnx2x_link_report_locked(sc);
|
|
bnx2x_release_phy_lock(sc);
|
|
}
|
|
|
|
void bnx2x_link_status_update(struct bnx2x_softc *sc)
|
|
{
|
|
if (sc->state != BNX2X_STATE_OPEN) {
|
|
return;
|
|
}
|
|
|
|
if (IS_PF(sc) && !CHIP_REV_IS_SLOW(sc)) {
|
|
elink_link_status_update(&sc->link_params, &sc->link_vars);
|
|
} else {
|
|
sc->port.supported[0] |= (ELINK_SUPPORTED_10baseT_Half |
|
|
ELINK_SUPPORTED_10baseT_Full |
|
|
ELINK_SUPPORTED_100baseT_Half |
|
|
ELINK_SUPPORTED_100baseT_Full |
|
|
ELINK_SUPPORTED_1000baseT_Full |
|
|
ELINK_SUPPORTED_2500baseX_Full |
|
|
ELINK_SUPPORTED_10000baseT_Full |
|
|
ELINK_SUPPORTED_TP |
|
|
ELINK_SUPPORTED_FIBRE |
|
|
ELINK_SUPPORTED_Autoneg |
|
|
ELINK_SUPPORTED_Pause |
|
|
ELINK_SUPPORTED_Asym_Pause);
|
|
sc->port.advertising[0] = sc->port.supported[0];
|
|
|
|
sc->link_params.sc = sc;
|
|
sc->link_params.port = SC_PORT(sc);
|
|
sc->link_params.req_duplex[0] = DUPLEX_FULL;
|
|
sc->link_params.req_flow_ctrl[0] = ELINK_FLOW_CTRL_NONE;
|
|
sc->link_params.req_line_speed[0] = SPEED_10000;
|
|
sc->link_params.speed_cap_mask[0] = 0x7f0000;
|
|
sc->link_params.switch_cfg = ELINK_SWITCH_CFG_10G;
|
|
|
|
if (CHIP_REV_IS_FPGA(sc)) {
|
|
sc->link_vars.mac_type = ELINK_MAC_TYPE_EMAC;
|
|
sc->link_vars.line_speed = ELINK_SPEED_1000;
|
|
sc->link_vars.link_status = (LINK_STATUS_LINK_UP |
|
|
LINK_STATUS_SPEED_AND_DUPLEX_1000TFD);
|
|
} else {
|
|
sc->link_vars.mac_type = ELINK_MAC_TYPE_BMAC;
|
|
sc->link_vars.line_speed = ELINK_SPEED_10000;
|
|
sc->link_vars.link_status = (LINK_STATUS_LINK_UP |
|
|
LINK_STATUS_SPEED_AND_DUPLEX_10GTFD);
|
|
}
|
|
|
|
sc->link_vars.link_up = 1;
|
|
|
|
sc->link_vars.duplex = DUPLEX_FULL;
|
|
sc->link_vars.flow_ctrl = ELINK_FLOW_CTRL_NONE;
|
|
|
|
if (IS_PF(sc)) {
|
|
REG_WR(sc,
|
|
NIG_REG_EGRESS_DRAIN0_MODE +
|
|
sc->link_params.port * 4, 0);
|
|
bnx2x_stats_handle(sc, STATS_EVENT_LINK_UP);
|
|
bnx2x_link_report(sc);
|
|
}
|
|
}
|
|
|
|
if (IS_PF(sc)) {
|
|
if (sc->link_vars.link_up) {
|
|
bnx2x_stats_handle(sc, STATS_EVENT_LINK_UP);
|
|
} else {
|
|
bnx2x_stats_handle(sc, STATS_EVENT_STOP);
|
|
}
|
|
bnx2x_link_report(sc);
|
|
} else {
|
|
bnx2x_link_report_locked(sc);
|
|
bnx2x_stats_handle(sc, STATS_EVENT_LINK_UP);
|
|
}
|
|
}
|
|
|
|
static int bnx2x_initial_phy_init(struct bnx2x_softc *sc, int load_mode)
|
|
{
|
|
int rc, cfg_idx = bnx2x_get_link_cfg_idx(sc);
|
|
uint16_t req_line_speed = sc->link_params.req_line_speed[cfg_idx];
|
|
struct elink_params *lp = &sc->link_params;
|
|
|
|
bnx2x_set_requested_fc(sc);
|
|
|
|
bnx2x_acquire_phy_lock(sc);
|
|
|
|
if (load_mode == LOAD_DIAG) {
|
|
lp->loopback_mode = ELINK_LOOPBACK_XGXS;
|
|
/* Prefer doing PHY loopback at 10G speed, if possible */
|
|
if (lp->req_line_speed[cfg_idx] < ELINK_SPEED_10000) {
|
|
if (lp->speed_cap_mask[cfg_idx] &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) {
|
|
lp->req_line_speed[cfg_idx] = ELINK_SPEED_10000;
|
|
} else {
|
|
lp->req_line_speed[cfg_idx] = ELINK_SPEED_1000;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (load_mode == LOAD_LOOPBACK_EXT) {
|
|
lp->loopback_mode = ELINK_LOOPBACK_EXT;
|
|
}
|
|
|
|
rc = elink_phy_init(&sc->link_params, &sc->link_vars);
|
|
|
|
bnx2x_release_phy_lock(sc);
|
|
|
|
bnx2x_calc_fc_adv(sc);
|
|
|
|
if (sc->link_vars.link_up) {
|
|
bnx2x_stats_handle(sc, STATS_EVENT_LINK_UP);
|
|
bnx2x_link_report(sc);
|
|
}
|
|
|
|
sc->link_params.req_line_speed[cfg_idx] = req_line_speed;
|
|
return rc;
|
|
}
|
|
|
|
/* update flags in shmem */
|
|
static void
|
|
bnx2x_update_drv_flags(struct bnx2x_softc *sc, uint32_t flags, uint32_t set)
|
|
{
|
|
uint32_t drv_flags;
|
|
|
|
if (SHMEM2_HAS(sc, drv_flags)) {
|
|
bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_DRV_FLAGS);
|
|
drv_flags = SHMEM2_RD(sc, drv_flags);
|
|
|
|
if (set) {
|
|
drv_flags |= flags;
|
|
} else {
|
|
drv_flags &= ~flags;
|
|
}
|
|
|
|
SHMEM2_WR(sc, drv_flags, drv_flags);
|
|
|
|
bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_DRV_FLAGS);
|
|
}
|
|
}
|
|
|
|
/* periodic timer callout routine, only runs when the interface is up */
|
|
void bnx2x_periodic_callout(struct bnx2x_softc *sc)
|
|
{
|
|
if ((sc->state != BNX2X_STATE_OPEN) ||
|
|
(atomic_load_acq_long(&sc->periodic_flags) == PERIODIC_STOP)) {
|
|
PMD_DRV_LOG(DEBUG, sc, "periodic callout exit (state=0x%x)",
|
|
sc->state);
|
|
return;
|
|
}
|
|
if (!CHIP_REV_IS_SLOW(sc)) {
|
|
/*
|
|
* This barrier is needed to ensure the ordering between the writing
|
|
* to the sc->port.pmf in the bnx2x_nic_load() or bnx2x_pmf_update() and
|
|
* the reading here.
|
|
*/
|
|
mb();
|
|
if (sc->port.pmf) {
|
|
bnx2x_acquire_phy_lock(sc);
|
|
elink_period_func(&sc->link_params, &sc->link_vars);
|
|
bnx2x_release_phy_lock(sc);
|
|
}
|
|
}
|
|
#ifdef BNX2X_PULSE
|
|
if (IS_PF(sc) && !BNX2X_NOMCP(sc)) {
|
|
int mb_idx = SC_FW_MB_IDX(sc);
|
|
uint32_t drv_pulse;
|
|
uint32_t mcp_pulse;
|
|
|
|
++sc->fw_drv_pulse_wr_seq;
|
|
sc->fw_drv_pulse_wr_seq &= DRV_PULSE_SEQ_MASK;
|
|
|
|
drv_pulse = sc->fw_drv_pulse_wr_seq;
|
|
bnx2x_drv_pulse(sc);
|
|
|
|
mcp_pulse = (SHMEM_RD(sc, func_mb[mb_idx].mcp_pulse_mb) &
|
|
MCP_PULSE_SEQ_MASK);
|
|
|
|
/*
|
|
* The delta between driver pulse and mcp response should
|
|
* be 1 (before mcp response) or 0 (after mcp response).
|
|
*/
|
|
if ((drv_pulse != mcp_pulse) &&
|
|
(drv_pulse != ((mcp_pulse + 1) & MCP_PULSE_SEQ_MASK))) {
|
|
/* someone lost a heartbeat... */
|
|
PMD_DRV_LOG(ERR, sc,
|
|
"drv_pulse (0x%x) != mcp_pulse (0x%x)",
|
|
drv_pulse, mcp_pulse);
|
|
}
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/* start the controller */
|
|
static __rte_noinline
|
|
int bnx2x_nic_load(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
uint32_t load_code = 0;
|
|
int i, rc = 0;
|
|
|
|
PMD_INIT_FUNC_TRACE(sc);
|
|
|
|
sc->state = BNX2X_STATE_OPENING_WAITING_LOAD;
|
|
|
|
if (IS_PF(sc)) {
|
|
/* must be called before memory allocation and HW init */
|
|
bnx2x_ilt_set_info(sc);
|
|
}
|
|
|
|
bnx2x_set_fp_rx_buf_size(sc);
|
|
|
|
if (IS_PF(sc)) {
|
|
if (bnx2x_alloc_mem(sc) != 0) {
|
|
sc->state = BNX2X_STATE_CLOSED;
|
|
rc = -ENOMEM;
|
|
goto bnx2x_nic_load_error0;
|
|
}
|
|
}
|
|
|
|
/* allocate the host hardware/software hsi structures */
|
|
if (bnx2x_alloc_hsi_mem(sc) != 0) {
|
|
PMD_DRV_LOG(ERR, sc, "bnx2x_alloc_hsi_mem was failed");
|
|
sc->state = BNX2X_STATE_CLOSED;
|
|
rc = -ENOMEM;
|
|
goto bnx2x_nic_load_error0;
|
|
}
|
|
|
|
if (bnx2x_alloc_fw_stats_mem(sc) != 0) {
|
|
sc->state = BNX2X_STATE_CLOSED;
|
|
rc = -ENOMEM;
|
|
goto bnx2x_nic_load_error0;
|
|
}
|
|
|
|
if (IS_VF(sc)) {
|
|
rc = bnx2x_vf_init(sc);
|
|
if (rc) {
|
|
sc->state = BNX2X_STATE_ERROR;
|
|
goto bnx2x_nic_load_error0;
|
|
}
|
|
}
|
|
|
|
if (IS_PF(sc)) {
|
|
/* set pf load just before approaching the MCP */
|
|
bnx2x_set_pf_load(sc);
|
|
|
|
/* if MCP exists send load request and analyze response */
|
|
if (!BNX2X_NOMCP(sc)) {
|
|
/* attempt to load pf */
|
|
if (bnx2x_nic_load_request(sc, &load_code) != 0) {
|
|
sc->state = BNX2X_STATE_CLOSED;
|
|
rc = -ENXIO;
|
|
goto bnx2x_nic_load_error1;
|
|
}
|
|
|
|
/* what did the MCP say? */
|
|
if (bnx2x_nic_load_analyze_req(sc, load_code) != 0) {
|
|
bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_DONE, 0);
|
|
sc->state = BNX2X_STATE_CLOSED;
|
|
rc = -ENXIO;
|
|
goto bnx2x_nic_load_error2;
|
|
}
|
|
} else {
|
|
PMD_DRV_LOG(INFO, sc, "Device has no MCP!");
|
|
load_code = bnx2x_nic_load_no_mcp(sc);
|
|
}
|
|
|
|
/* mark PMF if applicable */
|
|
bnx2x_nic_load_pmf(sc, load_code);
|
|
|
|
/* Init Function state controlling object */
|
|
bnx2x_init_func_obj(sc);
|
|
|
|
/* Initialize HW */
|
|
if (bnx2x_init_hw(sc, load_code) != 0) {
|
|
PMD_DRV_LOG(NOTICE, sc, "HW init failed");
|
|
bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_DONE, 0);
|
|
sc->state = BNX2X_STATE_CLOSED;
|
|
rc = -ENXIO;
|
|
goto bnx2x_nic_load_error2;
|
|
}
|
|
}
|
|
|
|
bnx2x_nic_init(sc, load_code);
|
|
|
|
/* Init per-function objects */
|
|
if (IS_PF(sc)) {
|
|
bnx2x_init_objs(sc);
|
|
|
|
/* set AFEX default VLAN tag to an invalid value */
|
|
sc->devinfo.mf_info.afex_def_vlan_tag = -1;
|
|
|
|
sc->state = BNX2X_STATE_OPENING_WAITING_PORT;
|
|
rc = bnx2x_func_start(sc);
|
|
if (rc) {
|
|
PMD_DRV_LOG(NOTICE, sc, "Function start failed!");
|
|
bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_DONE, 0);
|
|
sc->state = BNX2X_STATE_ERROR;
|
|
goto bnx2x_nic_load_error3;
|
|
}
|
|
|
|
/* send LOAD_DONE command to MCP */
|
|
if (!BNX2X_NOMCP(sc)) {
|
|
load_code =
|
|
bnx2x_fw_command(sc, DRV_MSG_CODE_LOAD_DONE, 0);
|
|
if (!load_code) {
|
|
PMD_DRV_LOG(NOTICE, sc,
|
|
"MCP response failure, aborting");
|
|
sc->state = BNX2X_STATE_ERROR;
|
|
rc = -ENXIO;
|
|
goto bnx2x_nic_load_error3;
|
|
}
|
|
}
|
|
}
|
|
|
|
rc = bnx2x_setup_leading(sc);
|
|
if (rc) {
|
|
PMD_DRV_LOG(NOTICE, sc, "Setup leading failed!");
|
|
sc->state = BNX2X_STATE_ERROR;
|
|
goto bnx2x_nic_load_error3;
|
|
}
|
|
|
|
FOR_EACH_NONDEFAULT_ETH_QUEUE(sc, i) {
|
|
if (IS_PF(sc))
|
|
rc = bnx2x_setup_queue(sc, &sc->fp[i], FALSE);
|
|
else /* IS_VF(sc) */
|
|
rc = bnx2x_vf_setup_queue(sc, &sc->fp[i], FALSE);
|
|
|
|
if (rc) {
|
|
PMD_DRV_LOG(NOTICE, sc, "Queue(%d) setup failed", i);
|
|
sc->state = BNX2X_STATE_ERROR;
|
|
goto bnx2x_nic_load_error3;
|
|
}
|
|
}
|
|
|
|
rc = bnx2x_init_rss_pf(sc);
|
|
if (rc) {
|
|
PMD_DRV_LOG(NOTICE, sc, "PF RSS init failed");
|
|
sc->state = BNX2X_STATE_ERROR;
|
|
goto bnx2x_nic_load_error3;
|
|
}
|
|
|
|
/* now when Clients are configured we are ready to work */
|
|
sc->state = BNX2X_STATE_OPEN;
|
|
|
|
/* Configure a ucast MAC */
|
|
if (IS_PF(sc)) {
|
|
rc = bnx2x_set_eth_mac(sc, TRUE);
|
|
} else { /* IS_VF(sc) */
|
|
rc = bnx2x_vf_set_mac(sc, TRUE);
|
|
}
|
|
|
|
if (rc) {
|
|
PMD_DRV_LOG(NOTICE, sc, "Setting Ethernet MAC failed");
|
|
sc->state = BNX2X_STATE_ERROR;
|
|
goto bnx2x_nic_load_error3;
|
|
}
|
|
|
|
if (sc->port.pmf) {
|
|
rc = bnx2x_initial_phy_init(sc, LOAD_OPEN);
|
|
if (rc) {
|
|
sc->state = BNX2X_STATE_ERROR;
|
|
goto bnx2x_nic_load_error3;
|
|
}
|
|
}
|
|
|
|
sc->link_params.feature_config_flags &=
|
|
~ELINK_FEATURE_CONFIG_BOOT_FROM_SAN;
|
|
|
|
/* start the Tx */
|
|
switch (LOAD_OPEN) {
|
|
case LOAD_NORMAL:
|
|
case LOAD_OPEN:
|
|
break;
|
|
|
|
case LOAD_DIAG:
|
|
case LOAD_LOOPBACK_EXT:
|
|
sc->state = BNX2X_STATE_DIAG;
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (sc->port.pmf) {
|
|
bnx2x_update_drv_flags(sc, 1 << DRV_FLAGS_PORT_MASK, 0);
|
|
} else {
|
|
bnx2x_link_status_update(sc);
|
|
}
|
|
|
|
if (IS_PF(sc) && SHMEM2_HAS(sc, drv_capabilities_flag)) {
|
|
/* mark driver is loaded in shmem2 */
|
|
val = SHMEM2_RD(sc, drv_capabilities_flag[SC_FW_MB_IDX(sc)]);
|
|
SHMEM2_WR(sc, drv_capabilities_flag[SC_FW_MB_IDX(sc)],
|
|
(val |
|
|
DRV_FLAGS_CAPABILITIES_LOADED_SUPPORTED |
|
|
DRV_FLAGS_CAPABILITIES_LOADED_L2));
|
|
}
|
|
|
|
/* start fast path */
|
|
/* Initialize Rx filter */
|
|
bnx2x_set_rx_mode(sc);
|
|
|
|
/* wait for all pending SP commands to complete */
|
|
if (IS_PF(sc) && !bnx2x_wait_sp_comp(sc, ~0x0UL)) {
|
|
PMD_DRV_LOG(NOTICE, sc, "Timeout waiting for all SPs to complete!");
|
|
bnx2x_periodic_stop(sc);
|
|
bnx2x_nic_unload(sc, UNLOAD_CLOSE, FALSE);
|
|
return -ENXIO;
|
|
}
|
|
|
|
PMD_DRV_LOG(DEBUG, sc, "NIC successfully loaded");
|
|
|
|
return 0;
|
|
|
|
bnx2x_nic_load_error3:
|
|
|
|
if (IS_PF(sc)) {
|
|
bnx2x_int_disable_sync(sc, 1);
|
|
|
|
/* clean out queued objects */
|
|
bnx2x_squeeze_objects(sc);
|
|
}
|
|
|
|
bnx2x_nic_load_error2:
|
|
|
|
if (IS_PF(sc) && !BNX2X_NOMCP(sc)) {
|
|
bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP, 0);
|
|
bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_DONE, 0);
|
|
}
|
|
|
|
sc->port.pmf = 0;
|
|
|
|
bnx2x_nic_load_error1:
|
|
|
|
/* clear pf_load status, as it was already set */
|
|
if (IS_PF(sc)) {
|
|
bnx2x_clear_pf_load(sc);
|
|
}
|
|
|
|
bnx2x_nic_load_error0:
|
|
|
|
bnx2x_free_fw_stats_mem(sc);
|
|
bnx2x_free_hsi_mem(sc);
|
|
bnx2x_free_mem(sc);
|
|
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* Handles controller initialization.
|
|
*/
|
|
int bnx2x_init(struct bnx2x_softc *sc)
|
|
{
|
|
int other_engine = SC_PATH(sc) ? 0 : 1;
|
|
uint8_t other_load_status, load_status;
|
|
uint8_t global = FALSE;
|
|
int rc;
|
|
|
|
/* Check if the driver is still running and bail out if it is. */
|
|
if (sc->state != BNX2X_STATE_CLOSED) {
|
|
PMD_DRV_LOG(DEBUG, sc, "Init called while driver is running!");
|
|
rc = 0;
|
|
goto bnx2x_init_done;
|
|
}
|
|
|
|
bnx2x_set_power_state(sc, PCI_PM_D0);
|
|
|
|
/*
|
|
* If parity occurred during the unload, then attentions and/or
|
|
* RECOVERY_IN_PROGRESS may still be set. If so we want the first function
|
|
* loaded on the current engine to complete the recovery. Parity recovery
|
|
* is only relevant for PF driver.
|
|
*/
|
|
if (IS_PF(sc)) {
|
|
other_load_status = bnx2x_get_load_status(sc, other_engine);
|
|
load_status = bnx2x_get_load_status(sc, SC_PATH(sc));
|
|
|
|
if (!bnx2x_reset_is_done(sc, SC_PATH(sc)) ||
|
|
bnx2x_chk_parity_attn(sc, &global, TRUE)) {
|
|
do {
|
|
/*
|
|
* If there are attentions and they are in global blocks, set
|
|
* the GLOBAL_RESET bit regardless whether it will be this
|
|
* function that will complete the recovery or not.
|
|
*/
|
|
if (global) {
|
|
bnx2x_set_reset_global(sc);
|
|
}
|
|
|
|
/*
|
|
* Only the first function on the current engine should try
|
|
* to recover in open. In case of attentions in global blocks
|
|
* only the first in the chip should try to recover.
|
|
*/
|
|
if ((!load_status
|
|
&& (!global ||!other_load_status))
|
|
&& bnx2x_trylock_leader_lock(sc)
|
|
&& !bnx2x_leader_reset(sc)) {
|
|
PMD_DRV_LOG(INFO, sc,
|
|
"Recovered during init");
|
|
break;
|
|
}
|
|
|
|
/* recovery has failed... */
|
|
bnx2x_set_power_state(sc, PCI_PM_D3hot);
|
|
|
|
sc->recovery_state = BNX2X_RECOVERY_FAILED;
|
|
|
|
PMD_DRV_LOG(NOTICE, sc,
|
|
"Recovery flow hasn't properly "
|
|
"completed yet, try again later. "
|
|
"If you still see this message after a "
|
|
"few retries then power cycle is required.");
|
|
|
|
rc = -ENXIO;
|
|
goto bnx2x_init_done;
|
|
} while (0);
|
|
}
|
|
}
|
|
|
|
sc->recovery_state = BNX2X_RECOVERY_DONE;
|
|
|
|
rc = bnx2x_nic_load(sc);
|
|
|
|
bnx2x_init_done:
|
|
|
|
if (rc) {
|
|
PMD_DRV_LOG(NOTICE, sc, "Initialization failed, "
|
|
"stack notified driver is NOT running!");
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void bnx2x_get_function_num(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t val = 0;
|
|
|
|
/*
|
|
* Read the ME register to get the function number. The ME register
|
|
* holds the relative-function number and absolute-function number. The
|
|
* absolute-function number appears only in E2 and above. Before that
|
|
* these bits always contained zero, therefore we cannot blindly use them.
|
|
*/
|
|
|
|
val = REG_RD(sc, BAR_ME_REGISTER);
|
|
|
|
sc->pfunc_rel =
|
|
(uint8_t) ((val & ME_REG_PF_NUM) >> ME_REG_PF_NUM_SHIFT);
|
|
sc->path_id =
|
|
(uint8_t) ((val & ME_REG_ABS_PF_NUM) >> ME_REG_ABS_PF_NUM_SHIFT) &
|
|
1;
|
|
|
|
if (CHIP_PORT_MODE(sc) == CHIP_4_PORT_MODE) {
|
|
sc->pfunc_abs = ((sc->pfunc_rel << 1) | sc->path_id);
|
|
} else {
|
|
sc->pfunc_abs = (sc->pfunc_rel | sc->path_id);
|
|
}
|
|
|
|
PMD_DRV_LOG(DEBUG, sc,
|
|
"Relative function %d, Absolute function %d, Path %d",
|
|
sc->pfunc_rel, sc->pfunc_abs, sc->path_id);
|
|
}
|
|
|
|
static uint32_t bnx2x_get_shmem_mf_cfg_base(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t shmem2_size;
|
|
uint32_t offset;
|
|
uint32_t mf_cfg_offset_value;
|
|
|
|
/* Non 57712 */
|
|
offset = (SHMEM_ADDR(sc, func_mb) +
|
|
(MAX_FUNC_NUM * sizeof(struct drv_func_mb)));
|
|
|
|
/* 57712 plus */
|
|
if (sc->devinfo.shmem2_base != 0) {
|
|
shmem2_size = SHMEM2_RD(sc, size);
|
|
if (shmem2_size > offsetof(struct shmem2_region, mf_cfg_addr)) {
|
|
mf_cfg_offset_value = SHMEM2_RD(sc, mf_cfg_addr);
|
|
if (SHMEM_MF_CFG_ADDR_NONE != mf_cfg_offset_value) {
|
|
offset = mf_cfg_offset_value;
|
|
}
|
|
}
|
|
}
|
|
|
|
return offset;
|
|
}
|
|
|
|
static uint32_t bnx2x_pcie_capability_read(struct bnx2x_softc *sc, int reg)
|
|
{
|
|
uint32_t ret;
|
|
struct bnx2x_pci_cap *caps;
|
|
|
|
/* ensure PCIe capability is enabled */
|
|
caps = pci_find_cap(sc, PCIY_EXPRESS, BNX2X_PCI_CAP);
|
|
if (NULL != caps) {
|
|
PMD_DRV_LOG(DEBUG, sc, "Found PCIe capability: "
|
|
"id=0x%04X type=0x%04X addr=0x%08X",
|
|
caps->id, caps->type, caps->addr);
|
|
pci_read(sc, (caps->addr + reg), &ret, 2);
|
|
return ret;
|
|
}
|
|
|
|
PMD_DRV_LOG(WARNING, sc, "PCIe capability NOT FOUND!!!");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static uint8_t bnx2x_is_pcie_pending(struct bnx2x_softc *sc)
|
|
{
|
|
return bnx2x_pcie_capability_read(sc, PCIR_EXPRESS_DEVICE_STA) &
|
|
PCIM_EXP_STA_TRANSACTION_PND;
|
|
}
|
|
|
|
/*
|
|
* Walk the PCI capabiites list for the device to find what features are
|
|
* supported. These capabilites may be enabled/disabled by firmware so it's
|
|
* best to walk the list rather than make assumptions.
|
|
*/
|
|
static void bnx2x_probe_pci_caps(struct bnx2x_softc *sc)
|
|
{
|
|
PMD_INIT_FUNC_TRACE(sc);
|
|
|
|
struct bnx2x_pci_cap *caps;
|
|
uint16_t link_status;
|
|
int reg = 0;
|
|
|
|
/* check if PCI Power Management is enabled */
|
|
caps = pci_find_cap(sc, PCIY_PMG, BNX2X_PCI_CAP);
|
|
if (NULL != caps) {
|
|
PMD_DRV_LOG(DEBUG, sc, "Found PM capability: "
|
|
"id=0x%04X type=0x%04X addr=0x%08X",
|
|
caps->id, caps->type, caps->addr);
|
|
|
|
sc->devinfo.pcie_cap_flags |= BNX2X_PM_CAPABLE_FLAG;
|
|
sc->devinfo.pcie_pm_cap_reg = caps->addr;
|
|
}
|
|
|
|
link_status = bnx2x_pcie_capability_read(sc, PCIR_EXPRESS_LINK_STA);
|
|
|
|
sc->devinfo.pcie_link_speed = (link_status & PCIM_LINK_STA_SPEED);
|
|
sc->devinfo.pcie_link_width =
|
|
((link_status & PCIM_LINK_STA_WIDTH) >> 4);
|
|
|
|
PMD_DRV_LOG(DEBUG, sc, "PCIe link speed=%d width=%d",
|
|
sc->devinfo.pcie_link_speed, sc->devinfo.pcie_link_width);
|
|
|
|
sc->devinfo.pcie_cap_flags |= BNX2X_PCIE_CAPABLE_FLAG;
|
|
|
|
/* check if MSI capability is enabled */
|
|
caps = pci_find_cap(sc, PCIY_MSI, BNX2X_PCI_CAP);
|
|
if (NULL != caps) {
|
|
PMD_DRV_LOG(DEBUG, sc, "Found MSI capability at 0x%04x", reg);
|
|
|
|
sc->devinfo.pcie_cap_flags |= BNX2X_MSI_CAPABLE_FLAG;
|
|
sc->devinfo.pcie_msi_cap_reg = caps->addr;
|
|
}
|
|
|
|
/* check if MSI-X capability is enabled */
|
|
caps = pci_find_cap(sc, PCIY_MSIX, BNX2X_PCI_CAP);
|
|
if (NULL != caps) {
|
|
PMD_DRV_LOG(DEBUG, sc, "Found MSI-X capability at 0x%04x", reg);
|
|
|
|
sc->devinfo.pcie_cap_flags |= BNX2X_MSIX_CAPABLE_FLAG;
|
|
sc->devinfo.pcie_msix_cap_reg = caps->addr;
|
|
}
|
|
}
|
|
|
|
static int bnx2x_get_shmem_mf_cfg_info_sd(struct bnx2x_softc *sc)
|
|
{
|
|
struct bnx2x_mf_info *mf_info = &sc->devinfo.mf_info;
|
|
uint32_t val;
|
|
|
|
/* get the outer vlan if we're in switch-dependent mode */
|
|
|
|
val = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].e1hov_tag);
|
|
mf_info->ext_id = (uint16_t) val;
|
|
|
|
mf_info->multi_vnics_mode = 1;
|
|
|
|
if (!VALID_OVLAN(mf_info->ext_id)) {
|
|
PMD_DRV_LOG(NOTICE, sc, "Invalid VLAN (%d)", mf_info->ext_id);
|
|
return 1;
|
|
}
|
|
|
|
/* get the capabilities */
|
|
if ((mf_info->mf_config[SC_VN(sc)] & FUNC_MF_CFG_PROTOCOL_MASK) ==
|
|
FUNC_MF_CFG_PROTOCOL_ISCSI) {
|
|
mf_info->mf_protos_supported |= MF_PROTO_SUPPORT_ISCSI;
|
|
} else if ((mf_info->mf_config[SC_VN(sc)] & FUNC_MF_CFG_PROTOCOL_MASK)
|
|
== FUNC_MF_CFG_PROTOCOL_FCOE) {
|
|
mf_info->mf_protos_supported |= MF_PROTO_SUPPORT_FCOE;
|
|
} else {
|
|
mf_info->mf_protos_supported |= MF_PROTO_SUPPORT_ETHERNET;
|
|
}
|
|
|
|
mf_info->vnics_per_port =
|
|
(CHIP_PORT_MODE(sc) == CHIP_4_PORT_MODE) ? 2 : 4;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static uint32_t bnx2x_get_shmem_ext_proto_support_flags(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t retval = 0;
|
|
uint32_t val;
|
|
|
|
val = MFCFG_RD(sc, func_ext_config[SC_ABS_FUNC(sc)].func_cfg);
|
|
|
|
if (val & MACP_FUNC_CFG_FLAGS_ENABLED) {
|
|
if (val & MACP_FUNC_CFG_FLAGS_ETHERNET) {
|
|
retval |= MF_PROTO_SUPPORT_ETHERNET;
|
|
}
|
|
if (val & MACP_FUNC_CFG_FLAGS_ISCSI_OFFLOAD) {
|
|
retval |= MF_PROTO_SUPPORT_ISCSI;
|
|
}
|
|
if (val & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD) {
|
|
retval |= MF_PROTO_SUPPORT_FCOE;
|
|
}
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int bnx2x_get_shmem_mf_cfg_info_si(struct bnx2x_softc *sc)
|
|
{
|
|
struct bnx2x_mf_info *mf_info = &sc->devinfo.mf_info;
|
|
uint32_t val;
|
|
|
|
/*
|
|
* There is no outer vlan if we're in switch-independent mode.
|
|
* If the mac is valid then assume multi-function.
|
|
*/
|
|
|
|
val = MFCFG_RD(sc, func_ext_config[SC_ABS_FUNC(sc)].func_cfg);
|
|
|
|
mf_info->multi_vnics_mode = ((val & MACP_FUNC_CFG_FLAGS_MASK) != 0);
|
|
|
|
mf_info->mf_protos_supported =
|
|
bnx2x_get_shmem_ext_proto_support_flags(sc);
|
|
|
|
mf_info->vnics_per_port =
|
|
(CHIP_PORT_MODE(sc) == CHIP_4_PORT_MODE) ? 2 : 4;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_get_shmem_mf_cfg_info_niv(struct bnx2x_softc *sc)
|
|
{
|
|
struct bnx2x_mf_info *mf_info = &sc->devinfo.mf_info;
|
|
uint32_t e1hov_tag;
|
|
uint32_t func_config;
|
|
uint32_t niv_config;
|
|
|
|
mf_info->multi_vnics_mode = 1;
|
|
|
|
e1hov_tag = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].e1hov_tag);
|
|
func_config = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].config);
|
|
niv_config = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].afex_config);
|
|
|
|
mf_info->ext_id =
|
|
(uint16_t) ((e1hov_tag & FUNC_MF_CFG_E1HOV_TAG_MASK) >>
|
|
FUNC_MF_CFG_E1HOV_TAG_SHIFT);
|
|
|
|
mf_info->default_vlan =
|
|
(uint16_t) ((e1hov_tag & FUNC_MF_CFG_AFEX_VLAN_MASK) >>
|
|
FUNC_MF_CFG_AFEX_VLAN_SHIFT);
|
|
|
|
mf_info->niv_allowed_priorities =
|
|
(uint8_t) ((niv_config & FUNC_MF_CFG_AFEX_COS_FILTER_MASK) >>
|
|
FUNC_MF_CFG_AFEX_COS_FILTER_SHIFT);
|
|
|
|
mf_info->niv_default_cos =
|
|
(uint8_t) ((func_config & FUNC_MF_CFG_TRANSMIT_PRIORITY_MASK) >>
|
|
FUNC_MF_CFG_TRANSMIT_PRIORITY_SHIFT);
|
|
|
|
mf_info->afex_vlan_mode =
|
|
((niv_config & FUNC_MF_CFG_AFEX_VLAN_MODE_MASK) >>
|
|
FUNC_MF_CFG_AFEX_VLAN_MODE_SHIFT);
|
|
|
|
mf_info->niv_mba_enabled =
|
|
((niv_config & FUNC_MF_CFG_AFEX_MBA_ENABLED_MASK) >>
|
|
FUNC_MF_CFG_AFEX_MBA_ENABLED_SHIFT);
|
|
|
|
mf_info->mf_protos_supported =
|
|
bnx2x_get_shmem_ext_proto_support_flags(sc);
|
|
|
|
mf_info->vnics_per_port =
|
|
(CHIP_PORT_MODE(sc) == CHIP_4_PORT_MODE) ? 2 : 4;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_check_valid_mf_cfg(struct bnx2x_softc *sc)
|
|
{
|
|
struct bnx2x_mf_info *mf_info = &sc->devinfo.mf_info;
|
|
uint32_t mf_cfg1;
|
|
uint32_t mf_cfg2;
|
|
uint32_t ovlan1;
|
|
uint32_t ovlan2;
|
|
uint8_t i, j;
|
|
|
|
/* various MF mode sanity checks... */
|
|
|
|
if (mf_info->mf_config[SC_VN(sc)] & FUNC_MF_CFG_FUNC_HIDE) {
|
|
PMD_DRV_LOG(NOTICE, sc,
|
|
"Enumerated function %d is marked as hidden",
|
|
SC_PORT(sc));
|
|
return 1;
|
|
}
|
|
|
|
if ((mf_info->vnics_per_port > 1) && !mf_info->multi_vnics_mode) {
|
|
PMD_DRV_LOG(NOTICE, sc, "vnics_per_port=%d multi_vnics_mode=%d",
|
|
mf_info->vnics_per_port, mf_info->multi_vnics_mode);
|
|
return 1;
|
|
}
|
|
|
|
if (mf_info->mf_mode == MULTI_FUNCTION_SD) {
|
|
/* vnic id > 0 must have valid ovlan in switch-dependent mode */
|
|
if ((SC_VN(sc) > 0) && !VALID_OVLAN(OVLAN(sc))) {
|
|
PMD_DRV_LOG(NOTICE, sc, "mf_mode=SD vnic_id=%d ovlan=%d",
|
|
SC_VN(sc), OVLAN(sc));
|
|
return 1;
|
|
}
|
|
|
|
if (!VALID_OVLAN(OVLAN(sc)) && mf_info->multi_vnics_mode) {
|
|
PMD_DRV_LOG(NOTICE, sc,
|
|
"mf_mode=SD multi_vnics_mode=%d ovlan=%d",
|
|
mf_info->multi_vnics_mode, OVLAN(sc));
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Verify all functions are either MF or SF mode. If MF, make sure
|
|
* sure that all non-hidden functions have a valid ovlan. If SF,
|
|
* make sure that all non-hidden functions have an invalid ovlan.
|
|
*/
|
|
FOREACH_ABS_FUNC_IN_PORT(sc, i) {
|
|
mf_cfg1 = MFCFG_RD(sc, func_mf_config[i].config);
|
|
ovlan1 = MFCFG_RD(sc, func_mf_config[i].e1hov_tag);
|
|
if (!(mf_cfg1 & FUNC_MF_CFG_FUNC_HIDE) &&
|
|
(((mf_info->multi_vnics_mode)
|
|
&& !VALID_OVLAN(ovlan1))
|
|
|| ((!mf_info->multi_vnics_mode)
|
|
&& VALID_OVLAN(ovlan1)))) {
|
|
PMD_DRV_LOG(NOTICE, sc,
|
|
"mf_mode=SD function %d MF config "
|
|
"mismatch, multi_vnics_mode=%d ovlan=%d",
|
|
i, mf_info->multi_vnics_mode,
|
|
ovlan1);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
/* Verify all funcs on the same port each have a different ovlan. */
|
|
FOREACH_ABS_FUNC_IN_PORT(sc, i) {
|
|
mf_cfg1 = MFCFG_RD(sc, func_mf_config[i].config);
|
|
ovlan1 = MFCFG_RD(sc, func_mf_config[i].e1hov_tag);
|
|
/* iterate from the next function on the port to the max func */
|
|
for (j = i + 2; j < MAX_FUNC_NUM; j += 2) {
|
|
mf_cfg2 =
|
|
MFCFG_RD(sc, func_mf_config[j].config);
|
|
ovlan2 =
|
|
MFCFG_RD(sc, func_mf_config[j].e1hov_tag);
|
|
if (!(mf_cfg1 & FUNC_MF_CFG_FUNC_HIDE)
|
|
&& VALID_OVLAN(ovlan1)
|
|
&& !(mf_cfg2 & FUNC_MF_CFG_FUNC_HIDE)
|
|
&& VALID_OVLAN(ovlan2)
|
|
&& (ovlan1 == ovlan2)) {
|
|
PMD_DRV_LOG(NOTICE, sc,
|
|
"mf_mode=SD functions %d and %d "
|
|
"have the same ovlan (%d)",
|
|
i, j, ovlan1);
|
|
return 1;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
/* MULTI_FUNCTION_SD */
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_get_mf_cfg_info(struct bnx2x_softc *sc)
|
|
{
|
|
struct bnx2x_mf_info *mf_info = &sc->devinfo.mf_info;
|
|
uint32_t val, mac_upper;
|
|
uint8_t i, vnic;
|
|
|
|
/* initialize mf_info defaults */
|
|
mf_info->vnics_per_port = 1;
|
|
mf_info->multi_vnics_mode = FALSE;
|
|
mf_info->path_has_ovlan = FALSE;
|
|
mf_info->mf_mode = SINGLE_FUNCTION;
|
|
|
|
if (!CHIP_IS_MF_CAP(sc)) {
|
|
return 0;
|
|
}
|
|
|
|
if (sc->devinfo.mf_cfg_base == SHMEM_MF_CFG_ADDR_NONE) {
|
|
PMD_DRV_LOG(NOTICE, sc, "Invalid mf_cfg_base!");
|
|
return 1;
|
|
}
|
|
|
|
/* get the MF mode (switch dependent / independent / single-function) */
|
|
|
|
val = SHMEM_RD(sc, dev_info.shared_feature_config.config);
|
|
|
|
switch (val & SHARED_FEAT_CFG_FORCE_SF_MODE_MASK) {
|
|
case SHARED_FEAT_CFG_FORCE_SF_MODE_SWITCH_INDEPT:
|
|
|
|
mac_upper =
|
|
MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].mac_upper);
|
|
|
|
/* check for legal upper mac bytes */
|
|
if (mac_upper != FUNC_MF_CFG_UPPERMAC_DEFAULT) {
|
|
mf_info->mf_mode = MULTI_FUNCTION_SI;
|
|
} else {
|
|
PMD_DRV_LOG(NOTICE, sc,
|
|
"Invalid config for Switch Independent mode");
|
|
}
|
|
|
|
break;
|
|
|
|
case SHARED_FEAT_CFG_FORCE_SF_MODE_MF_ALLOWED:
|
|
case SHARED_FEAT_CFG_FORCE_SF_MODE_SPIO4:
|
|
|
|
/* get outer vlan configuration */
|
|
val = MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].e1hov_tag);
|
|
|
|
if ((val & FUNC_MF_CFG_E1HOV_TAG_MASK) !=
|
|
FUNC_MF_CFG_E1HOV_TAG_DEFAULT) {
|
|
mf_info->mf_mode = MULTI_FUNCTION_SD;
|
|
} else {
|
|
PMD_DRV_LOG(NOTICE, sc,
|
|
"Invalid config for Switch Dependent mode");
|
|
}
|
|
|
|
break;
|
|
|
|
case SHARED_FEAT_CFG_FORCE_SF_MODE_FORCED_SF:
|
|
|
|
/* not in MF mode, vnics_per_port=1 and multi_vnics_mode=FALSE */
|
|
return 0;
|
|
|
|
case SHARED_FEAT_CFG_FORCE_SF_MODE_AFEX_MODE:
|
|
|
|
/*
|
|
* Mark MF mode as NIV if MCP version includes NPAR-SD support
|
|
* and the MAC address is valid.
|
|
*/
|
|
mac_upper =
|
|
MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].mac_upper);
|
|
|
|
if ((SHMEM2_HAS(sc, afex_driver_support)) &&
|
|
(mac_upper != FUNC_MF_CFG_UPPERMAC_DEFAULT)) {
|
|
mf_info->mf_mode = MULTI_FUNCTION_AFEX;
|
|
} else {
|
|
PMD_DRV_LOG(NOTICE, sc, "Invalid config for AFEX mode");
|
|
}
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
PMD_DRV_LOG(NOTICE, sc, "Unknown MF mode (0x%08x)",
|
|
(val & SHARED_FEAT_CFG_FORCE_SF_MODE_MASK));
|
|
|
|
return 1;
|
|
}
|
|
|
|
/* set path mf_mode (which could be different than function mf_mode) */
|
|
if (mf_info->mf_mode == MULTI_FUNCTION_SD) {
|
|
mf_info->path_has_ovlan = TRUE;
|
|
} else if (mf_info->mf_mode == SINGLE_FUNCTION) {
|
|
/*
|
|
* Decide on path multi vnics mode. If we're not in MF mode and in
|
|
* 4-port mode, this is good enough to check vnic-0 of the other port
|
|
* on the same path
|
|
*/
|
|
if (CHIP_PORT_MODE(sc) == CHIP_4_PORT_MODE) {
|
|
uint8_t other_port = !(PORT_ID(sc) & 1);
|
|
uint8_t abs_func_other_port =
|
|
(SC_PATH(sc) + (2 * other_port));
|
|
|
|
val =
|
|
MFCFG_RD(sc,
|
|
func_mf_config
|
|
[abs_func_other_port].e1hov_tag);
|
|
|
|
mf_info->path_has_ovlan = VALID_OVLAN((uint16_t) val);
|
|
}
|
|
}
|
|
|
|
if (mf_info->mf_mode == SINGLE_FUNCTION) {
|
|
/* invalid MF config */
|
|
if (SC_VN(sc) >= 1) {
|
|
PMD_DRV_LOG(NOTICE, sc, "VNIC ID >= 1 in SF mode");
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* get the MF configuration */
|
|
mf_info->mf_config[SC_VN(sc)] =
|
|
MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].config);
|
|
|
|
switch (mf_info->mf_mode) {
|
|
case MULTI_FUNCTION_SD:
|
|
|
|
bnx2x_get_shmem_mf_cfg_info_sd(sc);
|
|
break;
|
|
|
|
case MULTI_FUNCTION_SI:
|
|
|
|
bnx2x_get_shmem_mf_cfg_info_si(sc);
|
|
break;
|
|
|
|
case MULTI_FUNCTION_AFEX:
|
|
|
|
bnx2x_get_shmem_mf_cfg_info_niv(sc);
|
|
break;
|
|
|
|
default:
|
|
|
|
PMD_DRV_LOG(NOTICE, sc, "Get MF config failed (mf_mode=0x%08x)",
|
|
mf_info->mf_mode);
|
|
return 1;
|
|
}
|
|
|
|
/* get the congestion management parameters */
|
|
|
|
vnic = 0;
|
|
FOREACH_ABS_FUNC_IN_PORT(sc, i) {
|
|
/* get min/max bw */
|
|
val = MFCFG_RD(sc, func_mf_config[i].config);
|
|
mf_info->min_bw[vnic] =
|
|
((val & FUNC_MF_CFG_MIN_BW_MASK) >>
|
|
FUNC_MF_CFG_MIN_BW_SHIFT);
|
|
mf_info->max_bw[vnic] =
|
|
((val & FUNC_MF_CFG_MAX_BW_MASK) >>
|
|
FUNC_MF_CFG_MAX_BW_SHIFT);
|
|
vnic++;
|
|
}
|
|
|
|
return bnx2x_check_valid_mf_cfg(sc);
|
|
}
|
|
|
|
static int bnx2x_get_shmem_info(struct bnx2x_softc *sc)
|
|
{
|
|
int port;
|
|
uint32_t mac_hi, mac_lo, val;
|
|
|
|
PMD_INIT_FUNC_TRACE(sc);
|
|
|
|
port = SC_PORT(sc);
|
|
mac_hi = mac_lo = 0;
|
|
|
|
sc->link_params.sc = sc;
|
|
sc->link_params.port = port;
|
|
|
|
/* get the hardware config info */
|
|
sc->devinfo.hw_config = SHMEM_RD(sc, dev_info.shared_hw_config.config);
|
|
sc->devinfo.hw_config2 =
|
|
SHMEM_RD(sc, dev_info.shared_hw_config.config2);
|
|
|
|
sc->link_params.hw_led_mode =
|
|
((sc->devinfo.hw_config & SHARED_HW_CFG_LED_MODE_MASK) >>
|
|
SHARED_HW_CFG_LED_MODE_SHIFT);
|
|
|
|
/* get the port feature config */
|
|
sc->port.config =
|
|
SHMEM_RD(sc, dev_info.port_feature_config[port].config);
|
|
|
|
/* get the link params */
|
|
sc->link_params.speed_cap_mask[ELINK_INT_PHY] =
|
|
SHMEM_RD(sc, dev_info.port_hw_config[port].speed_capability_mask)
|
|
& PORT_HW_CFG_SPEED_CAPABILITY_D0_MASK;
|
|
sc->link_params.speed_cap_mask[ELINK_EXT_PHY1] =
|
|
SHMEM_RD(sc, dev_info.port_hw_config[port].speed_capability_mask2)
|
|
& PORT_HW_CFG_SPEED_CAPABILITY_D0_MASK;
|
|
|
|
/* get the lane config */
|
|
sc->link_params.lane_config =
|
|
SHMEM_RD(sc, dev_info.port_hw_config[port].lane_config);
|
|
|
|
/* get the link config */
|
|
val = SHMEM_RD(sc, dev_info.port_feature_config[port].link_config);
|
|
sc->port.link_config[ELINK_INT_PHY] = val;
|
|
sc->link_params.switch_cfg = (val & PORT_FEATURE_CONNECTED_SWITCH_MASK);
|
|
sc->port.link_config[ELINK_EXT_PHY1] =
|
|
SHMEM_RD(sc, dev_info.port_feature_config[port].link_config2);
|
|
|
|
/* get the override preemphasis flag and enable it or turn it off */
|
|
val = SHMEM_RD(sc, dev_info.shared_feature_config.config);
|
|
if (val & SHARED_FEAT_CFG_OVERRIDE_PREEMPHASIS_CFG_ENABLED) {
|
|
sc->link_params.feature_config_flags |=
|
|
ELINK_FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED;
|
|
} else {
|
|
sc->link_params.feature_config_flags &=
|
|
~ELINK_FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED;
|
|
}
|
|
|
|
val = sc->devinfo.bc_ver >> 8;
|
|
if (val < BNX2X_BC_VER) {
|
|
/* for now only warn later we might need to enforce this */
|
|
PMD_DRV_LOG(NOTICE, sc, "This driver needs bc_ver %X but found %X, please upgrade BC\n",
|
|
BNX2X_BC_VER, val);
|
|
}
|
|
sc->link_params.feature_config_flags |=
|
|
(val >= REQ_BC_VER_4_VRFY_FIRST_PHY_OPT_MDL) ?
|
|
ELINK_FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY :
|
|
0;
|
|
|
|
sc->link_params.feature_config_flags |=
|
|
(val >= REQ_BC_VER_4_VRFY_SPECIFIC_PHY_OPT_MDL) ?
|
|
ELINK_FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY : 0;
|
|
sc->link_params.feature_config_flags |=
|
|
(val >= REQ_BC_VER_4_VRFY_AFEX_SUPPORTED) ?
|
|
ELINK_FEATURE_CONFIG_BC_SUPPORTS_AFEX : 0;
|
|
sc->link_params.feature_config_flags |=
|
|
(val >= REQ_BC_VER_4_SFP_TX_DISABLE_SUPPORTED) ?
|
|
ELINK_FEATURE_CONFIG_BC_SUPPORTS_SFP_TX_DISABLED : 0;
|
|
|
|
/* get the initial value of the link params */
|
|
sc->link_params.multi_phy_config =
|
|
SHMEM_RD(sc, dev_info.port_hw_config[port].multi_phy_config);
|
|
|
|
/* get external phy info */
|
|
sc->port.ext_phy_config =
|
|
SHMEM_RD(sc, dev_info.port_hw_config[port].external_phy_config);
|
|
|
|
/* get the multifunction configuration */
|
|
bnx2x_get_mf_cfg_info(sc);
|
|
|
|
/* get the mac address */
|
|
if (IS_MF(sc)) {
|
|
mac_hi =
|
|
MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].mac_upper);
|
|
mac_lo =
|
|
MFCFG_RD(sc, func_mf_config[SC_ABS_FUNC(sc)].mac_lower);
|
|
} else {
|
|
mac_hi = SHMEM_RD(sc, dev_info.port_hw_config[port].mac_upper);
|
|
mac_lo = SHMEM_RD(sc, dev_info.port_hw_config[port].mac_lower);
|
|
}
|
|
|
|
if ((mac_lo == 0) && (mac_hi == 0)) {
|
|
*sc->mac_addr_str = 0;
|
|
PMD_DRV_LOG(NOTICE, sc, "No Ethernet address programmed!");
|
|
} else {
|
|
sc->link_params.mac_addr[0] = (uint8_t) (mac_hi >> 8);
|
|
sc->link_params.mac_addr[1] = (uint8_t) (mac_hi);
|
|
sc->link_params.mac_addr[2] = (uint8_t) (mac_lo >> 24);
|
|
sc->link_params.mac_addr[3] = (uint8_t) (mac_lo >> 16);
|
|
sc->link_params.mac_addr[4] = (uint8_t) (mac_lo >> 8);
|
|
sc->link_params.mac_addr[5] = (uint8_t) (mac_lo);
|
|
snprintf(sc->mac_addr_str, sizeof(sc->mac_addr_str),
|
|
"%02x:%02x:%02x:%02x:%02x:%02x",
|
|
sc->link_params.mac_addr[0],
|
|
sc->link_params.mac_addr[1],
|
|
sc->link_params.mac_addr[2],
|
|
sc->link_params.mac_addr[3],
|
|
sc->link_params.mac_addr[4],
|
|
sc->link_params.mac_addr[5]);
|
|
PMD_DRV_LOG(DEBUG, sc,
|
|
"Ethernet address: %s", sc->mac_addr_str);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bnx2x_media_detect(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t phy_idx = bnx2x_get_cur_phy_idx(sc);
|
|
switch (sc->link_params.phy[phy_idx].media_type) {
|
|
case ELINK_ETH_PHY_SFPP_10G_FIBER:
|
|
case ELINK_ETH_PHY_SFP_1G_FIBER:
|
|
case ELINK_ETH_PHY_XFP_FIBER:
|
|
case ELINK_ETH_PHY_KR:
|
|
case ELINK_ETH_PHY_CX4:
|
|
PMD_DRV_LOG(INFO, sc, "Found 10GBase-CX4 media.");
|
|
sc->media = IFM_10G_CX4;
|
|
break;
|
|
case ELINK_ETH_PHY_DA_TWINAX:
|
|
PMD_DRV_LOG(INFO, sc, "Found 10Gb Twinax media.");
|
|
sc->media = IFM_10G_TWINAX;
|
|
break;
|
|
case ELINK_ETH_PHY_BASE_T:
|
|
PMD_DRV_LOG(INFO, sc, "Found 10GBase-T media.");
|
|
sc->media = IFM_10G_T;
|
|
break;
|
|
case ELINK_ETH_PHY_NOT_PRESENT:
|
|
PMD_DRV_LOG(INFO, sc, "Media not present.");
|
|
sc->media = 0;
|
|
break;
|
|
case ELINK_ETH_PHY_UNSPECIFIED:
|
|
default:
|
|
PMD_DRV_LOG(INFO, sc, "Unknown media!");
|
|
sc->media = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
#define GET_FIELD(value, fname) \
|
|
(((value) & (fname##_MASK)) >> (fname##_SHIFT))
|
|
#define IGU_FID(val) GET_FIELD((val), IGU_REG_MAPPING_MEMORY_FID)
|
|
#define IGU_VEC(val) GET_FIELD((val), IGU_REG_MAPPING_MEMORY_VECTOR)
|
|
|
|
static int bnx2x_get_igu_cam_info(struct bnx2x_softc *sc)
|
|
{
|
|
int pfid = SC_FUNC(sc);
|
|
int igu_sb_id;
|
|
uint32_t val;
|
|
uint8_t fid, igu_sb_cnt = 0;
|
|
|
|
sc->igu_base_sb = 0xff;
|
|
|
|
if (CHIP_INT_MODE_IS_BC(sc)) {
|
|
int vn = SC_VN(sc);
|
|
igu_sb_cnt = sc->igu_sb_cnt;
|
|
sc->igu_base_sb = ((CHIP_IS_MODE_4_PORT(sc) ? pfid : vn) *
|
|
FP_SB_MAX_E1x);
|
|
sc->igu_dsb_id = (E1HVN_MAX * FP_SB_MAX_E1x +
|
|
(CHIP_IS_MODE_4_PORT(sc) ? pfid : vn));
|
|
return 0;
|
|
}
|
|
|
|
/* IGU in normal mode - read CAM */
|
|
for (igu_sb_id = 0;
|
|
igu_sb_id < IGU_REG_MAPPING_MEMORY_SIZE; igu_sb_id++) {
|
|
val = REG_RD(sc, IGU_REG_MAPPING_MEMORY + igu_sb_id * 4);
|
|
if (!(val & IGU_REG_MAPPING_MEMORY_VALID)) {
|
|
continue;
|
|
}
|
|
fid = IGU_FID(val);
|
|
if (fid & IGU_FID_ENCODE_IS_PF) {
|
|
if ((fid & IGU_FID_PF_NUM_MASK) != pfid) {
|
|
continue;
|
|
}
|
|
if (IGU_VEC(val) == 0) {
|
|
/* default status block */
|
|
sc->igu_dsb_id = igu_sb_id;
|
|
} else {
|
|
if (sc->igu_base_sb == 0xff) {
|
|
sc->igu_base_sb = igu_sb_id;
|
|
}
|
|
igu_sb_cnt++;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Due to new PF resource allocation by MFW T7.4 and above, it's optional
|
|
* that number of CAM entries will not be equal to the value advertised in
|
|
* PCI. Driver should use the minimal value of both as the actual status
|
|
* block count
|
|
*/
|
|
sc->igu_sb_cnt = min(sc->igu_sb_cnt, igu_sb_cnt);
|
|
|
|
if (igu_sb_cnt == 0) {
|
|
PMD_DRV_LOG(ERR, sc, "CAM configuration error");
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Gather various information from the device config space, the device itself,
|
|
* shmem, and the user input.
|
|
*/
|
|
static int bnx2x_get_device_info(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
int rc;
|
|
|
|
/* get the chip revision (chip metal comes from pci config space) */
|
|
sc->devinfo.chip_id = sc->link_params.chip_id =
|
|
(((REG_RD(sc, MISC_REG_CHIP_NUM) & 0xffff) << 16) |
|
|
((REG_RD(sc, MISC_REG_CHIP_REV) & 0xf) << 12) |
|
|
(((REG_RD(sc, PCICFG_OFFSET + PCI_ID_VAL3) >> 24) & 0xf) << 4) |
|
|
((REG_RD(sc, MISC_REG_BOND_ID) & 0xf) << 0));
|
|
|
|
/* force 57811 according to MISC register */
|
|
if (REG_RD(sc, MISC_REG_CHIP_TYPE) & MISC_REG_CHIP_TYPE_57811_MASK) {
|
|
if (CHIP_IS_57810(sc)) {
|
|
sc->devinfo.chip_id = ((CHIP_NUM_57811 << 16) |
|
|
(sc->
|
|
devinfo.chip_id & 0x0000ffff));
|
|
} else if (CHIP_IS_57810_MF(sc)) {
|
|
sc->devinfo.chip_id = ((CHIP_NUM_57811_MF << 16) |
|
|
(sc->
|
|
devinfo.chip_id & 0x0000ffff));
|
|
}
|
|
sc->devinfo.chip_id |= 0x1;
|
|
}
|
|
|
|
PMD_DRV_LOG(DEBUG, sc,
|
|
"chip_id=0x%08x (num=0x%04x rev=0x%01x metal=0x%02x bond=0x%01x)",
|
|
sc->devinfo.chip_id,
|
|
((sc->devinfo.chip_id >> 16) & 0xffff),
|
|
((sc->devinfo.chip_id >> 12) & 0xf),
|
|
((sc->devinfo.chip_id >> 4) & 0xff),
|
|
((sc->devinfo.chip_id >> 0) & 0xf));
|
|
|
|
val = (REG_RD(sc, 0x2874) & 0x55);
|
|
if ((sc->devinfo.chip_id & 0x1) || (CHIP_IS_E1H(sc) && (val == 0x55))) {
|
|
sc->flags |= BNX2X_ONE_PORT_FLAG;
|
|
PMD_DRV_LOG(DEBUG, sc, "single port device");
|
|
}
|
|
|
|
/* set the doorbell size */
|
|
sc->doorbell_size = (1 << BNX2X_DB_SHIFT);
|
|
|
|
/* determine whether the device is in 2 port or 4 port mode */
|
|
sc->devinfo.chip_port_mode = CHIP_PORT_MODE_NONE; /* E1h */
|
|
if (CHIP_IS_E2E3(sc)) {
|
|
/*
|
|
* Read port4mode_en_ovwr[0]:
|
|
* If 1, four port mode is in port4mode_en_ovwr[1].
|
|
* If 0, four port mode is in port4mode_en[0].
|
|
*/
|
|
val = REG_RD(sc, MISC_REG_PORT4MODE_EN_OVWR);
|
|
if (val & 1) {
|
|
val = ((val >> 1) & 1);
|
|
} else {
|
|
val = REG_RD(sc, MISC_REG_PORT4MODE_EN);
|
|
}
|
|
|
|
sc->devinfo.chip_port_mode =
|
|
(val) ? CHIP_4_PORT_MODE : CHIP_2_PORT_MODE;
|
|
|
|
PMD_DRV_LOG(DEBUG, sc, "Port mode = %s", (val) ? "4" : "2");
|
|
}
|
|
|
|
/* get the function and path info for the device */
|
|
bnx2x_get_function_num(sc);
|
|
|
|
/* get the shared memory base address */
|
|
sc->devinfo.shmem_base =
|
|
sc->link_params.shmem_base = REG_RD(sc, MISC_REG_SHARED_MEM_ADDR);
|
|
sc->devinfo.shmem2_base =
|
|
REG_RD(sc, (SC_PATH(sc) ? MISC_REG_GENERIC_CR_1 :
|
|
MISC_REG_GENERIC_CR_0));
|
|
|
|
if (!sc->devinfo.shmem_base) {
|
|
/* this should ONLY prevent upcoming shmem reads */
|
|
PMD_DRV_LOG(INFO, sc, "MCP not active");
|
|
sc->flags |= BNX2X_NO_MCP_FLAG;
|
|
return 0;
|
|
}
|
|
|
|
/* make sure the shared memory contents are valid */
|
|
val = SHMEM_RD(sc, validity_map[SC_PORT(sc)]);
|
|
if ((val & (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) !=
|
|
(SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) {
|
|
PMD_DRV_LOG(NOTICE, sc, "Invalid SHMEM validity signature: 0x%08x",
|
|
val);
|
|
return 0;
|
|
}
|
|
|
|
/* get the bootcode version */
|
|
sc->devinfo.bc_ver = SHMEM_RD(sc, dev_info.bc_rev);
|
|
snprintf(sc->devinfo.bc_ver_str,
|
|
sizeof(sc->devinfo.bc_ver_str),
|
|
"%d.%d.%d",
|
|
((sc->devinfo.bc_ver >> 24) & 0xff),
|
|
((sc->devinfo.bc_ver >> 16) & 0xff),
|
|
((sc->devinfo.bc_ver >> 8) & 0xff));
|
|
PMD_DRV_LOG(DEBUG, sc, "Bootcode version: %s", sc->devinfo.bc_ver_str);
|
|
|
|
/* get the bootcode shmem address */
|
|
sc->devinfo.mf_cfg_base = bnx2x_get_shmem_mf_cfg_base(sc);
|
|
|
|
/* clean indirect addresses as they're not used */
|
|
pci_write_long(sc, PCICFG_GRC_ADDRESS, 0);
|
|
if (IS_PF(sc)) {
|
|
REG_WR(sc, PXP2_REG_PGL_ADDR_88_F0, 0);
|
|
REG_WR(sc, PXP2_REG_PGL_ADDR_8C_F0, 0);
|
|
REG_WR(sc, PXP2_REG_PGL_ADDR_90_F0, 0);
|
|
REG_WR(sc, PXP2_REG_PGL_ADDR_94_F0, 0);
|
|
if (CHIP_IS_E1x(sc)) {
|
|
REG_WR(sc, PXP2_REG_PGL_ADDR_88_F1, 0);
|
|
REG_WR(sc, PXP2_REG_PGL_ADDR_8C_F1, 0);
|
|
REG_WR(sc, PXP2_REG_PGL_ADDR_90_F1, 0);
|
|
REG_WR(sc, PXP2_REG_PGL_ADDR_94_F1, 0);
|
|
}
|
|
}
|
|
|
|
/* get the nvram size */
|
|
val = REG_RD(sc, MCP_REG_MCPR_NVM_CFG4);
|
|
sc->devinfo.flash_size =
|
|
(NVRAM_1MB_SIZE << (val & MCPR_NVM_CFG4_FLASH_SIZE));
|
|
|
|
bnx2x_set_power_state(sc, PCI_PM_D0);
|
|
/* get various configuration parameters from shmem */
|
|
bnx2x_get_shmem_info(sc);
|
|
|
|
/* initialize IGU parameters */
|
|
if (CHIP_IS_E1x(sc)) {
|
|
sc->devinfo.int_block = INT_BLOCK_HC;
|
|
sc->igu_dsb_id = DEF_SB_IGU_ID;
|
|
sc->igu_base_sb = 0;
|
|
} else {
|
|
sc->devinfo.int_block = INT_BLOCK_IGU;
|
|
|
|
/* do not allow device reset during IGU info preocessing */
|
|
bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RESET);
|
|
|
|
val = REG_RD(sc, IGU_REG_BLOCK_CONFIGURATION);
|
|
|
|
if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) {
|
|
int tout = 5000;
|
|
|
|
val &= ~(IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN);
|
|
REG_WR(sc, IGU_REG_BLOCK_CONFIGURATION, val);
|
|
REG_WR(sc, IGU_REG_RESET_MEMORIES, 0x7f);
|
|
|
|
while (tout && REG_RD(sc, IGU_REG_RESET_MEMORIES)) {
|
|
tout--;
|
|
DELAY(1000);
|
|
}
|
|
|
|
if (REG_RD(sc, IGU_REG_RESET_MEMORIES)) {
|
|
PMD_DRV_LOG(NOTICE, sc,
|
|
"FORCING IGU Normal Mode failed!!!");
|
|
bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RESET);
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) {
|
|
PMD_DRV_LOG(DEBUG, sc, "IGU Backward Compatible Mode");
|
|
sc->devinfo.int_block |= INT_BLOCK_MODE_BW_COMP;
|
|
} else {
|
|
PMD_DRV_LOG(DEBUG, sc, "IGU Normal Mode");
|
|
}
|
|
|
|
rc = bnx2x_get_igu_cam_info(sc);
|
|
|
|
bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RESET);
|
|
|
|
if (rc) {
|
|
return rc;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Get base FW non-default (fast path) status block ID. This value is
|
|
* used to initialize the fw_sb_id saved on the fp/queue structure to
|
|
* determine the id used by the FW.
|
|
*/
|
|
if (CHIP_IS_E1x(sc)) {
|
|
sc->base_fw_ndsb =
|
|
((SC_PORT(sc) * FP_SB_MAX_E1x) + SC_L_ID(sc));
|
|
} else {
|
|
/*
|
|
* 57712+ - We currently use one FW SB per IGU SB (Rx and Tx of
|
|
* the same queue are indicated on the same IGU SB). So we prefer
|
|
* FW and IGU SBs to be the same value.
|
|
*/
|
|
sc->base_fw_ndsb = sc->igu_base_sb;
|
|
}
|
|
|
|
elink_phy_probe(&sc->link_params);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
bnx2x_link_settings_supported(struct bnx2x_softc *sc, uint32_t switch_cfg)
|
|
{
|
|
uint32_t cfg_size = 0;
|
|
uint32_t idx;
|
|
uint8_t port = SC_PORT(sc);
|
|
|
|
/* aggregation of supported attributes of all external phys */
|
|
sc->port.supported[0] = 0;
|
|
sc->port.supported[1] = 0;
|
|
|
|
switch (sc->link_params.num_phys) {
|
|
case 1:
|
|
sc->port.supported[0] =
|
|
sc->link_params.phy[ELINK_INT_PHY].supported;
|
|
cfg_size = 1;
|
|
break;
|
|
case 2:
|
|
sc->port.supported[0] =
|
|
sc->link_params.phy[ELINK_EXT_PHY1].supported;
|
|
cfg_size = 1;
|
|
break;
|
|
case 3:
|
|
if (sc->link_params.multi_phy_config &
|
|
PORT_HW_CFG_PHY_SWAPPED_ENABLED) {
|
|
sc->port.supported[1] =
|
|
sc->link_params.phy[ELINK_EXT_PHY1].supported;
|
|
sc->port.supported[0] =
|
|
sc->link_params.phy[ELINK_EXT_PHY2].supported;
|
|
} else {
|
|
sc->port.supported[0] =
|
|
sc->link_params.phy[ELINK_EXT_PHY1].supported;
|
|
sc->port.supported[1] =
|
|
sc->link_params.phy[ELINK_EXT_PHY2].supported;
|
|
}
|
|
cfg_size = 2;
|
|
break;
|
|
}
|
|
|
|
if (!(sc->port.supported[0] || sc->port.supported[1])) {
|
|
PMD_DRV_LOG(ERR, sc,
|
|
"Invalid phy config in NVRAM (PHY1=0x%08x PHY2=0x%08x)",
|
|
SHMEM_RD(sc,
|
|
dev_info.port_hw_config
|
|
[port].external_phy_config),
|
|
SHMEM_RD(sc,
|
|
dev_info.port_hw_config
|
|
[port].external_phy_config2));
|
|
return;
|
|
}
|
|
|
|
if (CHIP_IS_E3(sc))
|
|
sc->port.phy_addr = REG_RD(sc, MISC_REG_WC0_CTRL_PHY_ADDR);
|
|
else {
|
|
switch (switch_cfg) {
|
|
case ELINK_SWITCH_CFG_1G:
|
|
sc->port.phy_addr =
|
|
REG_RD(sc,
|
|
NIG_REG_SERDES0_CTRL_PHY_ADDR + port * 0x10);
|
|
break;
|
|
case ELINK_SWITCH_CFG_10G:
|
|
sc->port.phy_addr =
|
|
REG_RD(sc,
|
|
NIG_REG_XGXS0_CTRL_PHY_ADDR + port * 0x18);
|
|
break;
|
|
default:
|
|
PMD_DRV_LOG(ERR, sc,
|
|
"Invalid switch config in"
|
|
"link_config=0x%08x",
|
|
sc->port.link_config[0]);
|
|
return;
|
|
}
|
|
}
|
|
|
|
PMD_DRV_LOG(INFO, sc, "PHY addr 0x%08x", sc->port.phy_addr);
|
|
|
|
/* mask what we support according to speed_cap_mask per configuration */
|
|
for (idx = 0; idx < cfg_size; idx++) {
|
|
if (!(sc->link_params.speed_cap_mask[idx] &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)) {
|
|
sc->port.supported[idx] &=
|
|
~ELINK_SUPPORTED_10baseT_Half;
|
|
}
|
|
|
|
if (!(sc->link_params.speed_cap_mask[idx] &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL)) {
|
|
sc->port.supported[idx] &=
|
|
~ELINK_SUPPORTED_10baseT_Full;
|
|
}
|
|
|
|
if (!(sc->link_params.speed_cap_mask[idx] &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)) {
|
|
sc->port.supported[idx] &=
|
|
~ELINK_SUPPORTED_100baseT_Half;
|
|
}
|
|
|
|
if (!(sc->link_params.speed_cap_mask[idx] &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL)) {
|
|
sc->port.supported[idx] &=
|
|
~ELINK_SUPPORTED_100baseT_Full;
|
|
}
|
|
|
|
if (!(sc->link_params.speed_cap_mask[idx] &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) {
|
|
sc->port.supported[idx] &=
|
|
~ELINK_SUPPORTED_1000baseT_Full;
|
|
}
|
|
|
|
if (!(sc->link_params.speed_cap_mask[idx] &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G)) {
|
|
sc->port.supported[idx] &=
|
|
~ELINK_SUPPORTED_2500baseX_Full;
|
|
}
|
|
|
|
if (!(sc->link_params.speed_cap_mask[idx] &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) {
|
|
sc->port.supported[idx] &=
|
|
~ELINK_SUPPORTED_10000baseT_Full;
|
|
}
|
|
|
|
if (!(sc->link_params.speed_cap_mask[idx] &
|
|
PORT_HW_CFG_SPEED_CAPABILITY_D0_20G)) {
|
|
sc->port.supported[idx] &=
|
|
~ELINK_SUPPORTED_20000baseKR2_Full;
|
|
}
|
|
}
|
|
|
|
PMD_DRV_LOG(INFO, sc, "PHY supported 0=0x%08x 1=0x%08x",
|
|
sc->port.supported[0], sc->port.supported[1]);
|
|
}
|
|
|
|
static void bnx2x_link_settings_requested(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t link_config;
|
|
uint32_t idx;
|
|
uint32_t cfg_size = 0;
|
|
|
|
sc->port.advertising[0] = 0;
|
|
sc->port.advertising[1] = 0;
|
|
|
|
switch (sc->link_params.num_phys) {
|
|
case 1:
|
|
case 2:
|
|
cfg_size = 1;
|
|
break;
|
|
case 3:
|
|
cfg_size = 2;
|
|
break;
|
|
}
|
|
|
|
for (idx = 0; idx < cfg_size; idx++) {
|
|
sc->link_params.req_duplex[idx] = DUPLEX_FULL;
|
|
link_config = sc->port.link_config[idx];
|
|
|
|
switch (link_config & PORT_FEATURE_LINK_SPEED_MASK) {
|
|
case PORT_FEATURE_LINK_SPEED_AUTO:
|
|
if (sc->port.supported[idx] & ELINK_SUPPORTED_Autoneg) {
|
|
sc->link_params.req_line_speed[idx] =
|
|
ELINK_SPEED_AUTO_NEG;
|
|
sc->port.advertising[idx] |=
|
|
sc->port.supported[idx];
|
|
if (sc->link_params.phy[ELINK_EXT_PHY1].type ==
|
|
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833)
|
|
sc->port.advertising[idx] |=
|
|
(ELINK_SUPPORTED_100baseT_Half |
|
|
ELINK_SUPPORTED_100baseT_Full);
|
|
} else {
|
|
/* force 10G, no AN */
|
|
sc->link_params.req_line_speed[idx] =
|
|
ELINK_SPEED_10000;
|
|
sc->port.advertising[idx] |=
|
|
(ADVERTISED_10000baseT_Full |
|
|
ADVERTISED_FIBRE);
|
|
continue;
|
|
}
|
|
break;
|
|
|
|
case PORT_FEATURE_LINK_SPEED_10M_FULL:
|
|
if (sc->
|
|
port.supported[idx] & ELINK_SUPPORTED_10baseT_Full)
|
|
{
|
|
sc->link_params.req_line_speed[idx] =
|
|
ELINK_SPEED_10;
|
|
sc->port.advertising[idx] |=
|
|
(ADVERTISED_10baseT_Full | ADVERTISED_TP);
|
|
} else {
|
|
PMD_DRV_LOG(ERR, sc,
|
|
"Invalid NVRAM config link_config=0x%08x "
|
|
"speed_cap_mask=0x%08x",
|
|
link_config,
|
|
sc->
|
|
link_params.speed_cap_mask[idx]);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case PORT_FEATURE_LINK_SPEED_10M_HALF:
|
|
if (sc->
|
|
port.supported[idx] & ELINK_SUPPORTED_10baseT_Half)
|
|
{
|
|
sc->link_params.req_line_speed[idx] =
|
|
ELINK_SPEED_10;
|
|
sc->link_params.req_duplex[idx] = DUPLEX_HALF;
|
|
sc->port.advertising[idx] |=
|
|
(ADVERTISED_10baseT_Half | ADVERTISED_TP);
|
|
} else {
|
|
PMD_DRV_LOG(ERR, sc,
|
|
"Invalid NVRAM config link_config=0x%08x "
|
|
"speed_cap_mask=0x%08x",
|
|
link_config,
|
|
sc->
|
|
link_params.speed_cap_mask[idx]);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case PORT_FEATURE_LINK_SPEED_100M_FULL:
|
|
if (sc->
|
|
port.supported[idx] & ELINK_SUPPORTED_100baseT_Full)
|
|
{
|
|
sc->link_params.req_line_speed[idx] =
|
|
ELINK_SPEED_100;
|
|
sc->port.advertising[idx] |=
|
|
(ADVERTISED_100baseT_Full | ADVERTISED_TP);
|
|
} else {
|
|
PMD_DRV_LOG(ERR, sc,
|
|
"Invalid NVRAM config link_config=0x%08x "
|
|
"speed_cap_mask=0x%08x",
|
|
link_config,
|
|
sc->
|
|
link_params.speed_cap_mask[idx]);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case PORT_FEATURE_LINK_SPEED_100M_HALF:
|
|
if (sc->
|
|
port.supported[idx] & ELINK_SUPPORTED_100baseT_Half)
|
|
{
|
|
sc->link_params.req_line_speed[idx] =
|
|
ELINK_SPEED_100;
|
|
sc->link_params.req_duplex[idx] = DUPLEX_HALF;
|
|
sc->port.advertising[idx] |=
|
|
(ADVERTISED_100baseT_Half | ADVERTISED_TP);
|
|
} else {
|
|
PMD_DRV_LOG(ERR, sc,
|
|
"Invalid NVRAM config link_config=0x%08x "
|
|
"speed_cap_mask=0x%08x",
|
|
link_config,
|
|
sc->
|
|
link_params.speed_cap_mask[idx]);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case PORT_FEATURE_LINK_SPEED_1G:
|
|
if (sc->port.supported[idx] &
|
|
ELINK_SUPPORTED_1000baseT_Full) {
|
|
sc->link_params.req_line_speed[idx] =
|
|
ELINK_SPEED_1000;
|
|
sc->port.advertising[idx] |=
|
|
(ADVERTISED_1000baseT_Full | ADVERTISED_TP);
|
|
} else {
|
|
PMD_DRV_LOG(ERR, sc,
|
|
"Invalid NVRAM config link_config=0x%08x "
|
|
"speed_cap_mask=0x%08x",
|
|
link_config,
|
|
sc->
|
|
link_params.speed_cap_mask[idx]);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case PORT_FEATURE_LINK_SPEED_2_5G:
|
|
if (sc->port.supported[idx] &
|
|
ELINK_SUPPORTED_2500baseX_Full) {
|
|
sc->link_params.req_line_speed[idx] =
|
|
ELINK_SPEED_2500;
|
|
sc->port.advertising[idx] |=
|
|
(ADVERTISED_2500baseX_Full | ADVERTISED_TP);
|
|
} else {
|
|
PMD_DRV_LOG(ERR, sc,
|
|
"Invalid NVRAM config link_config=0x%08x "
|
|
"speed_cap_mask=0x%08x",
|
|
link_config,
|
|
sc->
|
|
link_params.speed_cap_mask[idx]);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case PORT_FEATURE_LINK_SPEED_10G_CX4:
|
|
if (sc->port.supported[idx] &
|
|
ELINK_SUPPORTED_10000baseT_Full) {
|
|
sc->link_params.req_line_speed[idx] =
|
|
ELINK_SPEED_10000;
|
|
sc->port.advertising[idx] |=
|
|
(ADVERTISED_10000baseT_Full |
|
|
ADVERTISED_FIBRE);
|
|
} else {
|
|
PMD_DRV_LOG(ERR, sc,
|
|
"Invalid NVRAM config link_config=0x%08x "
|
|
"speed_cap_mask=0x%08x",
|
|
link_config,
|
|
sc->
|
|
link_params.speed_cap_mask[idx]);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case PORT_FEATURE_LINK_SPEED_20G:
|
|
sc->link_params.req_line_speed[idx] = ELINK_SPEED_20000;
|
|
break;
|
|
|
|
default:
|
|
PMD_DRV_LOG(ERR, sc,
|
|
"Invalid NVRAM config link_config=0x%08x "
|
|
"speed_cap_mask=0x%08x", link_config,
|
|
sc->link_params.speed_cap_mask[idx]);
|
|
sc->link_params.req_line_speed[idx] =
|
|
ELINK_SPEED_AUTO_NEG;
|
|
sc->port.advertising[idx] = sc->port.supported[idx];
|
|
break;
|
|
}
|
|
|
|
sc->link_params.req_flow_ctrl[idx] =
|
|
(link_config & PORT_FEATURE_FLOW_CONTROL_MASK);
|
|
|
|
if (sc->link_params.req_flow_ctrl[idx] == ELINK_FLOW_CTRL_AUTO) {
|
|
if (!
|
|
(sc->
|
|
port.supported[idx] & ELINK_SUPPORTED_Autoneg)) {
|
|
sc->link_params.req_flow_ctrl[idx] =
|
|
ELINK_FLOW_CTRL_NONE;
|
|
} else {
|
|
bnx2x_set_requested_fc(sc);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static void bnx2x_get_phy_info(struct bnx2x_softc *sc)
|
|
{
|
|
uint8_t port = SC_PORT(sc);
|
|
uint32_t eee_mode;
|
|
|
|
PMD_INIT_FUNC_TRACE(sc);
|
|
|
|
/* shmem data already read in bnx2x_get_shmem_info() */
|
|
|
|
bnx2x_link_settings_supported(sc, sc->link_params.switch_cfg);
|
|
bnx2x_link_settings_requested(sc);
|
|
|
|
/* configure link feature according to nvram value */
|
|
eee_mode =
|
|
(((SHMEM_RD(sc, dev_info.port_feature_config[port].eee_power_mode))
|
|
& PORT_FEAT_CFG_EEE_POWER_MODE_MASK) >>
|
|
PORT_FEAT_CFG_EEE_POWER_MODE_SHIFT);
|
|
if (eee_mode != PORT_FEAT_CFG_EEE_POWER_MODE_DISABLED) {
|
|
sc->link_params.eee_mode = (ELINK_EEE_MODE_ADV_LPI |
|
|
ELINK_EEE_MODE_ENABLE_LPI |
|
|
ELINK_EEE_MODE_OUTPUT_TIME);
|
|
} else {
|
|
sc->link_params.eee_mode = 0;
|
|
}
|
|
|
|
/* get the media type */
|
|
bnx2x_media_detect(sc);
|
|
}
|
|
|
|
static void bnx2x_set_modes_bitmap(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t flags = MODE_ASIC | MODE_PORT2;
|
|
|
|
if (CHIP_IS_E2(sc)) {
|
|
flags |= MODE_E2;
|
|
} else if (CHIP_IS_E3(sc)) {
|
|
flags |= MODE_E3;
|
|
if (CHIP_REV(sc) == CHIP_REV_Ax) {
|
|
flags |= MODE_E3_A0;
|
|
} else { /*if (CHIP_REV(sc) == CHIP_REV_Bx) */
|
|
|
|
flags |= MODE_E3_B0 | MODE_COS3;
|
|
}
|
|
}
|
|
|
|
if (IS_MF(sc)) {
|
|
flags |= MODE_MF;
|
|
switch (sc->devinfo.mf_info.mf_mode) {
|
|
case MULTI_FUNCTION_SD:
|
|
flags |= MODE_MF_SD;
|
|
break;
|
|
case MULTI_FUNCTION_SI:
|
|
flags |= MODE_MF_SI;
|
|
break;
|
|
case MULTI_FUNCTION_AFEX:
|
|
flags |= MODE_MF_AFEX;
|
|
break;
|
|
}
|
|
} else {
|
|
flags |= MODE_SF;
|
|
}
|
|
|
|
#if defined(__LITTLE_ENDIAN)
|
|
flags |= MODE_LITTLE_ENDIAN;
|
|
#else /* __BIG_ENDIAN */
|
|
flags |= MODE_BIG_ENDIAN;
|
|
#endif
|
|
|
|
INIT_MODE_FLAGS(sc) = flags;
|
|
}
|
|
|
|
int bnx2x_alloc_hsi_mem(struct bnx2x_softc *sc)
|
|
{
|
|
struct bnx2x_fastpath *fp;
|
|
char buf[32];
|
|
uint32_t i;
|
|
|
|
if (IS_PF(sc)) {
|
|
/************************/
|
|
/* DEFAULT STATUS BLOCK */
|
|
/************************/
|
|
|
|
if (bnx2x_dma_alloc(sc, sizeof(struct host_sp_status_block),
|
|
&sc->def_sb_dma, "def_sb",
|
|
RTE_CACHE_LINE_SIZE) != 0) {
|
|
return -1;
|
|
}
|
|
|
|
sc->def_sb =
|
|
(struct host_sp_status_block *)sc->def_sb_dma.vaddr;
|
|
/***************/
|
|
/* EVENT QUEUE */
|
|
/***************/
|
|
|
|
if (bnx2x_dma_alloc(sc, BNX2X_PAGE_SIZE,
|
|
&sc->eq_dma, "ev_queue",
|
|
RTE_CACHE_LINE_SIZE) != 0) {
|
|
sc->def_sb = NULL;
|
|
return -1;
|
|
}
|
|
|
|
sc->eq = (union event_ring_elem *)sc->eq_dma.vaddr;
|
|
|
|
/*************/
|
|
/* SLOW PATH */
|
|
/*************/
|
|
|
|
if (bnx2x_dma_alloc(sc, sizeof(struct bnx2x_slowpath),
|
|
&sc->sp_dma, "sp",
|
|
RTE_CACHE_LINE_SIZE) != 0) {
|
|
sc->eq = NULL;
|
|
sc->def_sb = NULL;
|
|
return -1;
|
|
}
|
|
|
|
sc->sp = (struct bnx2x_slowpath *)sc->sp_dma.vaddr;
|
|
|
|
/*******************/
|
|
/* SLOW PATH QUEUE */
|
|
/*******************/
|
|
|
|
if (bnx2x_dma_alloc(sc, BNX2X_PAGE_SIZE,
|
|
&sc->spq_dma, "sp_queue",
|
|
RTE_CACHE_LINE_SIZE) != 0) {
|
|
sc->sp = NULL;
|
|
sc->eq = NULL;
|
|
sc->def_sb = NULL;
|
|
return -1;
|
|
}
|
|
|
|
sc->spq = (struct eth_spe *)sc->spq_dma.vaddr;
|
|
|
|
/***************************/
|
|
/* FW DECOMPRESSION BUFFER */
|
|
/***************************/
|
|
|
|
if (bnx2x_dma_alloc(sc, FW_BUF_SIZE, &sc->gz_buf_dma,
|
|
"fw_buf", RTE_CACHE_LINE_SIZE) != 0) {
|
|
sc->spq = NULL;
|
|
sc->sp = NULL;
|
|
sc->eq = NULL;
|
|
sc->def_sb = NULL;
|
|
return -1;
|
|
}
|
|
|
|
sc->gz_buf = (void *)sc->gz_buf_dma.vaddr;
|
|
}
|
|
|
|
/*************/
|
|
/* FASTPATHS */
|
|
/*************/
|
|
|
|
/* allocate DMA memory for each fastpath structure */
|
|
for (i = 0; i < sc->num_queues; i++) {
|
|
fp = &sc->fp[i];
|
|
fp->sc = sc;
|
|
fp->index = i;
|
|
|
|
/*******************/
|
|
/* FP STATUS BLOCK */
|
|
/*******************/
|
|
|
|
snprintf(buf, sizeof(buf), "fp_%d_sb", i);
|
|
if (bnx2x_dma_alloc(sc, sizeof(union bnx2x_host_hc_status_block),
|
|
&fp->sb_dma, buf, RTE_CACHE_LINE_SIZE) != 0) {
|
|
PMD_DRV_LOG(NOTICE, sc, "Failed to alloc %s", buf);
|
|
return -1;
|
|
} else {
|
|
if (CHIP_IS_E2E3(sc)) {
|
|
fp->status_block.e2_sb =
|
|
(struct host_hc_status_block_e2 *)
|
|
fp->sb_dma.vaddr;
|
|
} else {
|
|
fp->status_block.e1x_sb =
|
|
(struct host_hc_status_block_e1x *)
|
|
fp->sb_dma.vaddr;
|
|
}
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void bnx2x_free_hsi_mem(struct bnx2x_softc *sc)
|
|
{
|
|
struct bnx2x_fastpath *fp;
|
|
int i;
|
|
|
|
for (i = 0; i < sc->num_queues; i++) {
|
|
fp = &sc->fp[i];
|
|
|
|
/*******************/
|
|
/* FP STATUS BLOCK */
|
|
/*******************/
|
|
|
|
memset(&fp->status_block, 0, sizeof(fp->status_block));
|
|
bnx2x_dma_free(&fp->sb_dma);
|
|
}
|
|
|
|
if (IS_PF(sc)) {
|
|
/***************************/
|
|
/* FW DECOMPRESSION BUFFER */
|
|
/***************************/
|
|
|
|
bnx2x_dma_free(&sc->gz_buf_dma);
|
|
sc->gz_buf = NULL;
|
|
|
|
/*******************/
|
|
/* SLOW PATH QUEUE */
|
|
/*******************/
|
|
|
|
bnx2x_dma_free(&sc->spq_dma);
|
|
sc->spq = NULL;
|
|
|
|
/*************/
|
|
/* SLOW PATH */
|
|
/*************/
|
|
|
|
bnx2x_dma_free(&sc->sp_dma);
|
|
sc->sp = NULL;
|
|
|
|
/***************/
|
|
/* EVENT QUEUE */
|
|
/***************/
|
|
|
|
bnx2x_dma_free(&sc->eq_dma);
|
|
sc->eq = NULL;
|
|
|
|
/************************/
|
|
/* DEFAULT STATUS BLOCK */
|
|
/************************/
|
|
|
|
bnx2x_dma_free(&sc->def_sb_dma);
|
|
sc->def_sb = NULL;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Previous driver DMAE transaction may have occurred when pre-boot stage
|
|
* ended and boot began. This would invalidate the addresses of the
|
|
* transaction, resulting in was-error bit set in the PCI causing all
|
|
* hw-to-host PCIe transactions to timeout. If this happened we want to clear
|
|
* the interrupt which detected this from the pglueb and the was-done bit
|
|
*/
|
|
static void bnx2x_prev_interrupted_dmae(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
val = REG_RD(sc, PGLUE_B_REG_PGLUE_B_INT_STS);
|
|
if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN) {
|
|
REG_WR(sc, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR,
|
|
1 << SC_FUNC(sc));
|
|
}
|
|
}
|
|
}
|
|
|
|
static int bnx2x_prev_mcp_done(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t rc = bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_DONE,
|
|
DRV_MSG_CODE_UNLOAD_SKIP_LINK_RESET);
|
|
if (!rc) {
|
|
PMD_DRV_LOG(NOTICE, sc, "MCP response failure, aborting");
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct bnx2x_prev_list_node *bnx2x_prev_path_get_entry(struct bnx2x_softc *sc)
|
|
{
|
|
struct bnx2x_prev_list_node *tmp;
|
|
|
|
LIST_FOREACH(tmp, &bnx2x_prev_list, node) {
|
|
if ((sc->pcie_bus == tmp->bus) &&
|
|
(sc->pcie_device == tmp->slot) &&
|
|
(SC_PATH(sc) == tmp->path)) {
|
|
return tmp;
|
|
}
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static uint8_t bnx2x_prev_is_path_marked(struct bnx2x_softc *sc)
|
|
{
|
|
struct bnx2x_prev_list_node *tmp;
|
|
int rc = FALSE;
|
|
|
|
rte_spinlock_lock(&bnx2x_prev_mtx);
|
|
|
|
tmp = bnx2x_prev_path_get_entry(sc);
|
|
if (tmp) {
|
|
if (tmp->aer) {
|
|
PMD_DRV_LOG(DEBUG, sc,
|
|
"Path %d/%d/%d was marked by AER",
|
|
sc->pcie_bus, sc->pcie_device, SC_PATH(sc));
|
|
} else {
|
|
rc = TRUE;
|
|
PMD_DRV_LOG(DEBUG, sc,
|
|
"Path %d/%d/%d was already cleaned from previous drivers",
|
|
sc->pcie_bus, sc->pcie_device, SC_PATH(sc));
|
|
}
|
|
}
|
|
|
|
rte_spinlock_unlock(&bnx2x_prev_mtx);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int bnx2x_prev_mark_path(struct bnx2x_softc *sc, uint8_t after_undi)
|
|
{
|
|
struct bnx2x_prev_list_node *tmp;
|
|
|
|
rte_spinlock_lock(&bnx2x_prev_mtx);
|
|
|
|
/* Check whether the entry for this path already exists */
|
|
tmp = bnx2x_prev_path_get_entry(sc);
|
|
if (tmp) {
|
|
if (!tmp->aer) {
|
|
PMD_DRV_LOG(DEBUG, sc,
|
|
"Re-marking AER in path %d/%d/%d",
|
|
sc->pcie_bus, sc->pcie_device, SC_PATH(sc));
|
|
} else {
|
|
PMD_DRV_LOG(DEBUG, sc,
|
|
"Removing AER indication from path %d/%d/%d",
|
|
sc->pcie_bus, sc->pcie_device, SC_PATH(sc));
|
|
tmp->aer = 0;
|
|
}
|
|
|
|
rte_spinlock_unlock(&bnx2x_prev_mtx);
|
|
return 0;
|
|
}
|
|
|
|
rte_spinlock_unlock(&bnx2x_prev_mtx);
|
|
|
|
/* Create an entry for this path and add it */
|
|
tmp = rte_malloc("", sizeof(struct bnx2x_prev_list_node),
|
|
RTE_CACHE_LINE_SIZE);
|
|
if (!tmp) {
|
|
PMD_DRV_LOG(NOTICE, sc, "Failed to allocate 'bnx2x_prev_list_node'");
|
|
return -1;
|
|
}
|
|
|
|
tmp->bus = sc->pcie_bus;
|
|
tmp->slot = sc->pcie_device;
|
|
tmp->path = SC_PATH(sc);
|
|
tmp->aer = 0;
|
|
tmp->undi = after_undi ? (1 << SC_PORT(sc)) : 0;
|
|
|
|
rte_spinlock_lock(&bnx2x_prev_mtx);
|
|
|
|
LIST_INSERT_HEAD(&bnx2x_prev_list, tmp, node);
|
|
|
|
rte_spinlock_unlock(&bnx2x_prev_mtx);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_do_flr(struct bnx2x_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
/* only E2 and onwards support FLR */
|
|
if (CHIP_IS_E1x(sc)) {
|
|
PMD_DRV_LOG(WARNING, sc, "FLR not supported in E1H");
|
|
return -1;
|
|
}
|
|
|
|
/* only bootcode REQ_BC_VER_4_INITIATE_FLR and onwards support flr */
|
|
if (sc->devinfo.bc_ver < REQ_BC_VER_4_INITIATE_FLR) {
|
|
PMD_DRV_LOG(WARNING, sc,
|
|
"FLR not supported by BC_VER: 0x%08x",
|
|
sc->devinfo.bc_ver);
|
|
return -1;
|
|
}
|
|
|
|
/* Wait for Transaction Pending bit clean */
|
|
for (i = 0; i < 4; i++) {
|
|
if (i) {
|
|
DELAY(((1 << (i - 1)) * 100) * 1000);
|
|
}
|
|
|
|
if (!bnx2x_is_pcie_pending(sc)) {
|
|
goto clear;
|
|
}
|
|
}
|
|
|
|
PMD_DRV_LOG(NOTICE, sc, "PCIE transaction is not cleared, "
|
|
"proceeding with reset anyway");
|
|
|
|
clear:
|
|
bnx2x_fw_command(sc, DRV_MSG_CODE_INITIATE_FLR, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct bnx2x_mac_vals {
|
|
uint32_t xmac_addr;
|
|
uint32_t xmac_val;
|
|
uint32_t emac_addr;
|
|
uint32_t emac_val;
|
|
uint32_t umac_addr;
|
|
uint32_t umac_val;
|
|
uint32_t bmac_addr;
|
|
uint32_t bmac_val[2];
|
|
};
|
|
|
|
static void
|
|
bnx2x_prev_unload_close_mac(struct bnx2x_softc *sc, struct bnx2x_mac_vals *vals)
|
|
{
|
|
uint32_t val, base_addr, offset, mask, reset_reg;
|
|
uint8_t mac_stopped = FALSE;
|
|
uint8_t port = SC_PORT(sc);
|
|
uint32_t wb_data[2];
|
|
|
|
/* reset addresses as they also mark which values were changed */
|
|
vals->bmac_addr = 0;
|
|
vals->umac_addr = 0;
|
|
vals->xmac_addr = 0;
|
|
vals->emac_addr = 0;
|
|
|
|
reset_reg = REG_RD(sc, MISC_REG_RESET_REG_2);
|
|
|
|
if (!CHIP_IS_E3(sc)) {
|
|
val = REG_RD(sc, NIG_REG_BMAC0_REGS_OUT_EN + port * 4);
|
|
mask = MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port;
|
|
if ((mask & reset_reg) && val) {
|
|
base_addr = SC_PORT(sc) ? NIG_REG_INGRESS_BMAC1_MEM
|
|
: NIG_REG_INGRESS_BMAC0_MEM;
|
|
offset = CHIP_IS_E2(sc) ? BIGMAC2_REGISTER_BMAC_CONTROL
|
|
: BIGMAC_REGISTER_BMAC_CONTROL;
|
|
|
|
/*
|
|
* use rd/wr since we cannot use dmae. This is safe
|
|
* since MCP won't access the bus due to the request
|
|
* to unload, and no function on the path can be
|
|
* loaded at this time.
|
|
*/
|
|
wb_data[0] = REG_RD(sc, base_addr + offset);
|
|
wb_data[1] = REG_RD(sc, base_addr + offset + 0x4);
|
|
vals->bmac_addr = base_addr + offset;
|
|
vals->bmac_val[0] = wb_data[0];
|
|
vals->bmac_val[1] = wb_data[1];
|
|
wb_data[0] &= ~ELINK_BMAC_CONTROL_RX_ENABLE;
|
|
REG_WR(sc, vals->bmac_addr, wb_data[0]);
|
|
REG_WR(sc, vals->bmac_addr + 0x4, wb_data[1]);
|
|
}
|
|
|
|
vals->emac_addr = NIG_REG_NIG_EMAC0_EN + SC_PORT(sc) * 4;
|
|
vals->emac_val = REG_RD(sc, vals->emac_addr);
|
|
REG_WR(sc, vals->emac_addr, 0);
|
|
mac_stopped = TRUE;
|
|
} else {
|
|
if (reset_reg & MISC_REGISTERS_RESET_REG_2_XMAC) {
|
|
base_addr = SC_PORT(sc) ? GRCBASE_XMAC1 : GRCBASE_XMAC0;
|
|
val = REG_RD(sc, base_addr + XMAC_REG_PFC_CTRL_HI);
|
|
REG_WR(sc, base_addr + XMAC_REG_PFC_CTRL_HI,
|
|
val & ~(1 << 1));
|
|
REG_WR(sc, base_addr + XMAC_REG_PFC_CTRL_HI,
|
|
val | (1 << 1));
|
|
vals->xmac_addr = base_addr + XMAC_REG_CTRL;
|
|
vals->xmac_val = REG_RD(sc, vals->xmac_addr);
|
|
REG_WR(sc, vals->xmac_addr, 0);
|
|
mac_stopped = TRUE;
|
|
}
|
|
|
|
mask = MISC_REGISTERS_RESET_REG_2_UMAC0 << port;
|
|
if (mask & reset_reg) {
|
|
base_addr = SC_PORT(sc) ? GRCBASE_UMAC1 : GRCBASE_UMAC0;
|
|
vals->umac_addr = base_addr + UMAC_REG_COMMAND_CONFIG;
|
|
vals->umac_val = REG_RD(sc, vals->umac_addr);
|
|
REG_WR(sc, vals->umac_addr, 0);
|
|
mac_stopped = TRUE;
|
|
}
|
|
}
|
|
|
|
if (mac_stopped) {
|
|
DELAY(20000);
|
|
}
|
|
}
|
|
|
|
#define BNX2X_PREV_UNDI_PROD_ADDR(p) (BAR_TSTRORM_INTMEM + 0x1508 + ((p) << 4))
|
|
#define BNX2X_PREV_UNDI_RCQ(val) ((val) & 0xffff)
|
|
#define BNX2X_PREV_UNDI_BD(val) ((val) >> 16 & 0xffff)
|
|
#define BNX2X_PREV_UNDI_PROD(rcq, bd) ((bd) << 16 | (rcq))
|
|
|
|
static void
|
|
bnx2x_prev_unload_undi_inc(struct bnx2x_softc *sc, uint8_t port, uint8_t inc)
|
|
{
|
|
uint16_t rcq, bd;
|
|
uint32_t tmp_reg = REG_RD(sc, BNX2X_PREV_UNDI_PROD_ADDR(port));
|
|
|
|
rcq = BNX2X_PREV_UNDI_RCQ(tmp_reg) + inc;
|
|
bd = BNX2X_PREV_UNDI_BD(tmp_reg) + inc;
|
|
|
|
tmp_reg = BNX2X_PREV_UNDI_PROD(rcq, bd);
|
|
REG_WR(sc, BNX2X_PREV_UNDI_PROD_ADDR(port), tmp_reg);
|
|
}
|
|
|
|
static int bnx2x_prev_unload_common(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t reset_reg, tmp_reg = 0, rc;
|
|
uint8_t prev_undi = FALSE;
|
|
struct bnx2x_mac_vals mac_vals;
|
|
uint32_t timer_count = 1000;
|
|
uint32_t prev_brb;
|
|
|
|
/*
|
|
* It is possible a previous function received 'common' answer,
|
|
* but hasn't loaded yet, therefore creating a scenario of
|
|
* multiple functions receiving 'common' on the same path.
|
|
*/
|
|
memset(&mac_vals, 0, sizeof(mac_vals));
|
|
|
|
if (bnx2x_prev_is_path_marked(sc)) {
|
|
return bnx2x_prev_mcp_done(sc);
|
|
}
|
|
|
|
reset_reg = REG_RD(sc, MISC_REG_RESET_REG_1);
|
|
|
|
/* Reset should be performed after BRB is emptied */
|
|
if (reset_reg & MISC_REGISTERS_RESET_REG_1_RST_BRB1) {
|
|
/* Close the MAC Rx to prevent BRB from filling up */
|
|
bnx2x_prev_unload_close_mac(sc, &mac_vals);
|
|
|
|
/* close LLH filters towards the BRB */
|
|
elink_set_rx_filter(&sc->link_params, 0);
|
|
|
|
/*
|
|
* Check if the UNDI driver was previously loaded.
|
|
* UNDI driver initializes CID offset for normal bell to 0x7
|
|
*/
|
|
if (reset_reg & MISC_REGISTERS_RESET_REG_1_RST_DORQ) {
|
|
tmp_reg = REG_RD(sc, DORQ_REG_NORM_CID_OFST);
|
|
if (tmp_reg == 0x7) {
|
|
PMD_DRV_LOG(DEBUG, sc, "UNDI previously loaded");
|
|
prev_undi = TRUE;
|
|
/* clear the UNDI indication */
|
|
REG_WR(sc, DORQ_REG_NORM_CID_OFST, 0);
|
|
/* clear possible idle check errors */
|
|
REG_RD(sc, NIG_REG_NIG_INT_STS_CLR_0);
|
|
}
|
|
}
|
|
|
|
/* wait until BRB is empty */
|
|
tmp_reg = REG_RD(sc, BRB1_REG_NUM_OF_FULL_BLOCKS);
|
|
while (timer_count) {
|
|
prev_brb = tmp_reg;
|
|
|
|
tmp_reg = REG_RD(sc, BRB1_REG_NUM_OF_FULL_BLOCKS);
|
|
if (!tmp_reg) {
|
|
break;
|
|
}
|
|
|
|
PMD_DRV_LOG(DEBUG, sc, "BRB still has 0x%08x", tmp_reg);
|
|
|
|
/* reset timer as long as BRB actually gets emptied */
|
|
if (prev_brb > tmp_reg) {
|
|
timer_count = 1000;
|
|
} else {
|
|
timer_count--;
|
|
}
|
|
|
|
/* If UNDI resides in memory, manually increment it */
|
|
if (prev_undi) {
|
|
bnx2x_prev_unload_undi_inc(sc, SC_PORT(sc), 1);
|
|
}
|
|
|
|
DELAY(10);
|
|
}
|
|
|
|
if (!timer_count) {
|
|
PMD_DRV_LOG(NOTICE, sc, "Failed to empty BRB");
|
|
}
|
|
}
|
|
|
|
/* No packets are in the pipeline, path is ready for reset */
|
|
bnx2x_reset_common(sc);
|
|
|
|
if (mac_vals.xmac_addr) {
|
|
REG_WR(sc, mac_vals.xmac_addr, mac_vals.xmac_val);
|
|
}
|
|
if (mac_vals.umac_addr) {
|
|
REG_WR(sc, mac_vals.umac_addr, mac_vals.umac_val);
|
|
}
|
|
if (mac_vals.emac_addr) {
|
|
REG_WR(sc, mac_vals.emac_addr, mac_vals.emac_val);
|
|
}
|
|
if (mac_vals.bmac_addr) {
|
|
REG_WR(sc, mac_vals.bmac_addr, mac_vals.bmac_val[0]);
|
|
REG_WR(sc, mac_vals.bmac_addr + 4, mac_vals.bmac_val[1]);
|
|
}
|
|
|
|
rc = bnx2x_prev_mark_path(sc, prev_undi);
|
|
if (rc) {
|
|
bnx2x_prev_mcp_done(sc);
|
|
return rc;
|
|
}
|
|
|
|
return bnx2x_prev_mcp_done(sc);
|
|
}
|
|
|
|
static int bnx2x_prev_unload_uncommon(struct bnx2x_softc *sc)
|
|
{
|
|
int rc;
|
|
|
|
/* Test if previous unload process was already finished for this path */
|
|
if (bnx2x_prev_is_path_marked(sc)) {
|
|
return bnx2x_prev_mcp_done(sc);
|
|
}
|
|
|
|
/*
|
|
* If function has FLR capabilities, and existing FW version matches
|
|
* the one required, then FLR will be sufficient to clean any residue
|
|
* left by previous driver
|
|
*/
|
|
rc = bnx2x_nic_load_analyze_req(sc, FW_MSG_CODE_DRV_LOAD_FUNCTION);
|
|
if (!rc) {
|
|
/* fw version is good */
|
|
rc = bnx2x_do_flr(sc);
|
|
}
|
|
|
|
if (!rc) {
|
|
/* FLR was performed */
|
|
return 0;
|
|
}
|
|
|
|
PMD_DRV_LOG(INFO, sc, "Could not FLR");
|
|
|
|
/* Close the MCP request, return failure */
|
|
rc = bnx2x_prev_mcp_done(sc);
|
|
if (!rc) {
|
|
rc = BNX2X_PREV_WAIT_NEEDED;
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int bnx2x_prev_unload(struct bnx2x_softc *sc)
|
|
{
|
|
int time_counter = 10;
|
|
uint32_t fw, hw_lock_reg, hw_lock_val;
|
|
uint32_t rc = 0;
|
|
|
|
PMD_INIT_FUNC_TRACE(sc);
|
|
|
|
/*
|
|
* Clear HW from errors which may have resulted from an interrupted
|
|
* DMAE transaction.
|
|
*/
|
|
bnx2x_prev_interrupted_dmae(sc);
|
|
|
|
/* Release previously held locks */
|
|
hw_lock_reg = (SC_FUNC(sc) <= 5) ?
|
|
(MISC_REG_DRIVER_CONTROL_1 + SC_FUNC(sc) * 8) :
|
|
(MISC_REG_DRIVER_CONTROL_7 + (SC_FUNC(sc) - 6) * 8);
|
|
|
|
hw_lock_val = (REG_RD(sc, hw_lock_reg));
|
|
if (hw_lock_val) {
|
|
if (hw_lock_val & HW_LOCK_RESOURCE_NVRAM) {
|
|
PMD_DRV_LOG(DEBUG, sc, "Releasing previously held NVRAM lock\n");
|
|
REG_WR(sc, MCP_REG_MCPR_NVM_SW_ARB,
|
|
(MCPR_NVM_SW_ARB_ARB_REQ_CLR1 << SC_PORT(sc)));
|
|
}
|
|
PMD_DRV_LOG(DEBUG, sc, "Releasing previously held HW lock\n");
|
|
REG_WR(sc, hw_lock_reg, 0xffffffff);
|
|
}
|
|
|
|
if (MCPR_ACCESS_LOCK_LOCK & REG_RD(sc, MCP_REG_MCPR_ACCESS_LOCK)) {
|
|
PMD_DRV_LOG(DEBUG, sc, "Releasing previously held ALR\n");
|
|
REG_WR(sc, MCP_REG_MCPR_ACCESS_LOCK, 0);
|
|
}
|
|
|
|
do {
|
|
/* Lock MCP using an unload request */
|
|
fw = bnx2x_fw_command(sc, DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS, 0);
|
|
if (!fw) {
|
|
PMD_DRV_LOG(NOTICE, sc, "MCP response failure, aborting");
|
|
rc = -1;
|
|
break;
|
|
}
|
|
|
|
if (fw == FW_MSG_CODE_DRV_UNLOAD_COMMON) {
|
|
rc = bnx2x_prev_unload_common(sc);
|
|
break;
|
|
}
|
|
|
|
/* non-common reply from MCP might require looping */
|
|
rc = bnx2x_prev_unload_uncommon(sc);
|
|
if (rc != BNX2X_PREV_WAIT_NEEDED) {
|
|
break;
|
|
}
|
|
|
|
DELAY(20000);
|
|
} while (--time_counter);
|
|
|
|
if (!time_counter || rc) {
|
|
PMD_DRV_LOG(NOTICE, sc, "Failed to unload previous driver!");
|
|
rc = -1;
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void
|
|
bnx2x_dcbx_set_state(struct bnx2x_softc *sc, uint8_t dcb_on, uint32_t dcbx_enabled)
|
|
{
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
sc->dcb_state = dcb_on;
|
|
sc->dcbx_enabled = dcbx_enabled;
|
|
} else {
|
|
sc->dcb_state = FALSE;
|
|
sc->dcbx_enabled = BNX2X_DCBX_ENABLED_INVALID;
|
|
}
|
|
PMD_DRV_LOG(DEBUG, sc,
|
|
"DCB state [%s:%s]",
|
|
dcb_on ? "ON" : "OFF",
|
|
(dcbx_enabled == BNX2X_DCBX_ENABLED_OFF) ? "user-mode" :
|
|
(dcbx_enabled ==
|
|
BNX2X_DCBX_ENABLED_ON_NEG_OFF) ? "on-chip static"
|
|
: (dcbx_enabled ==
|
|
BNX2X_DCBX_ENABLED_ON_NEG_ON) ?
|
|
"on-chip with negotiation" : "invalid");
|
|
}
|
|
|
|
static int bnx2x_set_qm_cid_count(struct bnx2x_softc *sc)
|
|
{
|
|
int cid_count = BNX2X_L2_MAX_CID(sc);
|
|
|
|
if (CNIC_SUPPORT(sc)) {
|
|
cid_count += CNIC_CID_MAX;
|
|
}
|
|
|
|
return roundup(cid_count, QM_CID_ROUND);
|
|
}
|
|
|
|
static void bnx2x_init_multi_cos(struct bnx2x_softc *sc)
|
|
{
|
|
int pri, cos;
|
|
|
|
uint32_t pri_map = 0;
|
|
|
|
for (pri = 0; pri < BNX2X_MAX_PRIORITY; pri++) {
|
|
cos = ((pri_map & (0xf << (pri * 4))) >> (pri * 4));
|
|
if (cos < sc->max_cos) {
|
|
sc->prio_to_cos[pri] = cos;
|
|
} else {
|
|
PMD_DRV_LOG(WARNING, sc,
|
|
"Invalid COS %d for priority %d "
|
|
"(max COS is %d), setting to 0", cos, pri,
|
|
(sc->max_cos - 1));
|
|
sc->prio_to_cos[pri] = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int bnx2x_pci_get_caps(struct bnx2x_softc *sc)
|
|
{
|
|
struct {
|
|
uint8_t id;
|
|
uint8_t next;
|
|
} pci_cap;
|
|
uint16_t status;
|
|
struct bnx2x_pci_cap *cap;
|
|
|
|
cap = sc->pci_caps = rte_zmalloc("caps", sizeof(struct bnx2x_pci_cap),
|
|
RTE_CACHE_LINE_SIZE);
|
|
if (!cap) {
|
|
PMD_DRV_LOG(NOTICE, sc, "Failed to allocate memory");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
#ifndef RTE_EXEC_ENV_FREEBSD
|
|
pci_read(sc, PCI_STATUS, &status, 2);
|
|
if (!(status & PCI_STATUS_CAP_LIST)) {
|
|
#else
|
|
pci_read(sc, PCIR_STATUS, &status, 2);
|
|
if (!(status & PCIM_STATUS_CAPPRESENT)) {
|
|
#endif
|
|
PMD_DRV_LOG(NOTICE, sc, "PCIe capability reading failed");
|
|
return -1;
|
|
}
|
|
|
|
#ifndef RTE_EXEC_ENV_FREEBSD
|
|
pci_read(sc, PCI_CAPABILITY_LIST, &pci_cap.next, 1);
|
|
#else
|
|
pci_read(sc, PCIR_CAP_PTR, &pci_cap.next, 1);
|
|
#endif
|
|
while (pci_cap.next) {
|
|
cap->addr = pci_cap.next & ~3;
|
|
pci_read(sc, pci_cap.next & ~3, &pci_cap, 2);
|
|
if (pci_cap.id == 0xff)
|
|
break;
|
|
cap->id = pci_cap.id;
|
|
cap->type = BNX2X_PCI_CAP;
|
|
cap->next = rte_zmalloc("pci_cap",
|
|
sizeof(struct bnx2x_pci_cap),
|
|
RTE_CACHE_LINE_SIZE);
|
|
if (!cap->next) {
|
|
PMD_DRV_LOG(NOTICE, sc, "Failed to allocate memory");
|
|
return -ENOMEM;
|
|
}
|
|
cap = cap->next;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bnx2x_init_rte(struct bnx2x_softc *sc)
|
|
{
|
|
if (IS_VF(sc)) {
|
|
sc->max_tx_queues = min(BNX2X_VF_MAX_QUEUES_PER_VF,
|
|
sc->igu_sb_cnt);
|
|
sc->max_rx_queues = min(BNX2X_VF_MAX_QUEUES_PER_VF,
|
|
sc->igu_sb_cnt);
|
|
} else {
|
|
sc->max_rx_queues = BNX2X_MAX_RSS_COUNT(sc);
|
|
sc->max_tx_queues = sc->max_rx_queues;
|
|
}
|
|
}
|
|
|
|
#define FW_HEADER_LEN 104
|
|
#define FW_NAME_57711 "/lib/firmware/bnx2x/bnx2x-e1h-7.13.11.0.fw"
|
|
#define FW_NAME_57810 "/lib/firmware/bnx2x/bnx2x-e2-7.13.11.0.fw"
|
|
|
|
void bnx2x_load_firmware(struct bnx2x_softc *sc)
|
|
{
|
|
const char *fwname;
|
|
int f;
|
|
struct stat st;
|
|
|
|
fwname = sc->devinfo.device_id == CHIP_NUM_57711
|
|
? FW_NAME_57711 : FW_NAME_57810;
|
|
f = open(fwname, O_RDONLY);
|
|
if (f < 0) {
|
|
PMD_DRV_LOG(NOTICE, sc, "Can't open firmware file");
|
|
return;
|
|
}
|
|
|
|
if (fstat(f, &st) < 0) {
|
|
PMD_DRV_LOG(NOTICE, sc, "Can't stat firmware file");
|
|
close(f);
|
|
return;
|
|
}
|
|
|
|
sc->firmware = rte_zmalloc("bnx2x_fw", st.st_size, RTE_CACHE_LINE_SIZE);
|
|
if (!sc->firmware) {
|
|
PMD_DRV_LOG(NOTICE, sc, "Can't allocate memory for firmware");
|
|
close(f);
|
|
return;
|
|
}
|
|
|
|
if (read(f, sc->firmware, st.st_size) != st.st_size) {
|
|
PMD_DRV_LOG(NOTICE, sc, "Can't read firmware data");
|
|
close(f);
|
|
return;
|
|
}
|
|
close(f);
|
|
|
|
sc->fw_len = st.st_size;
|
|
if (sc->fw_len < FW_HEADER_LEN) {
|
|
PMD_DRV_LOG(NOTICE, sc,
|
|
"Invalid fw size: %" PRIu64, sc->fw_len);
|
|
return;
|
|
}
|
|
PMD_DRV_LOG(DEBUG, sc, "fw_len = %" PRIu64, sc->fw_len);
|
|
}
|
|
|
|
static void
|
|
bnx2x_data_to_init_ops(uint8_t * data, struct raw_op *dst, uint32_t len)
|
|
{
|
|
uint32_t *src = (uint32_t *) data;
|
|
uint32_t i, j, tmp;
|
|
|
|
for (i = 0, j = 0; i < len / 8; ++i, j += 2) {
|
|
tmp = rte_be_to_cpu_32(src[j]);
|
|
dst[i].op = (tmp >> 24) & 0xFF;
|
|
dst[i].offset = tmp & 0xFFFFFF;
|
|
dst[i].raw_data = rte_be_to_cpu_32(src[j + 1]);
|
|
}
|
|
}
|
|
|
|
static void
|
|
bnx2x_data_to_init_offsets(uint8_t * data, uint16_t * dst, uint32_t len)
|
|
{
|
|
uint16_t *src = (uint16_t *) data;
|
|
uint32_t i;
|
|
|
|
for (i = 0; i < len / 2; ++i)
|
|
dst[i] = rte_be_to_cpu_16(src[i]);
|
|
}
|
|
|
|
static void bnx2x_data_to_init_data(uint8_t * data, uint32_t * dst, uint32_t len)
|
|
{
|
|
uint32_t *src = (uint32_t *) data;
|
|
uint32_t i;
|
|
|
|
for (i = 0; i < len / 4; ++i)
|
|
dst[i] = rte_be_to_cpu_32(src[i]);
|
|
}
|
|
|
|
static void bnx2x_data_to_iro_array(uint8_t * data, struct iro *dst, uint32_t len)
|
|
{
|
|
uint32_t *src = (uint32_t *) data;
|
|
uint32_t i, j, tmp;
|
|
|
|
for (i = 0, j = 0; i < len / sizeof(struct iro); ++i, ++j) {
|
|
dst[i].base = rte_be_to_cpu_32(src[j++]);
|
|
tmp = rte_be_to_cpu_32(src[j]);
|
|
dst[i].m1 = (tmp >> 16) & 0xFFFF;
|
|
dst[i].m2 = tmp & 0xFFFF;
|
|
++j;
|
|
tmp = rte_be_to_cpu_32(src[j]);
|
|
dst[i].m3 = (tmp >> 16) & 0xFFFF;
|
|
dst[i].size = tmp & 0xFFFF;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Device attach function.
|
|
*
|
|
* Allocates device resources, performs secondary chip identification, and
|
|
* initializes driver instance variables. This function is called from driver
|
|
* load after a successful probe.
|
|
*
|
|
* Returns:
|
|
* 0 = Success, >0 = Failure
|
|
*/
|
|
int bnx2x_attach(struct bnx2x_softc *sc)
|
|
{
|
|
int rc;
|
|
|
|
PMD_DRV_LOG(DEBUG, sc, "Starting attach...");
|
|
|
|
rc = bnx2x_pci_get_caps(sc);
|
|
if (rc) {
|
|
PMD_DRV_LOG(NOTICE, sc, "PCIe caps reading was failed");
|
|
return rc;
|
|
}
|
|
|
|
sc->state = BNX2X_STATE_CLOSED;
|
|
|
|
pci_write_long(sc, PCICFG_GRC_ADDRESS, PCICFG_VENDOR_ID_OFFSET);
|
|
|
|
sc->igu_base_addr = IS_VF(sc) ? PXP_VF_ADDR_IGU_START : BAR_IGU_INTMEM;
|
|
|
|
/* get PCI capabilites */
|
|
bnx2x_probe_pci_caps(sc);
|
|
|
|
if (sc->devinfo.pcie_msix_cap_reg != 0) {
|
|
uint32_t val;
|
|
pci_read(sc,
|
|
(sc->devinfo.pcie_msix_cap_reg + PCIR_MSIX_CTRL), &val,
|
|
2);
|
|
sc->igu_sb_cnt = (val & PCIM_MSIXCTRL_TABLE_SIZE) + 1;
|
|
} else {
|
|
sc->igu_sb_cnt = 1;
|
|
}
|
|
|
|
/* Init RTE stuff */
|
|
bnx2x_init_rte(sc);
|
|
|
|
if (IS_PF(sc)) {
|
|
/* Enable internal target-read (in case we are probed after PF
|
|
* FLR). Must be done prior to any BAR read access. Only for
|
|
* 57712 and up
|
|
*/
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ,
|
|
1);
|
|
DELAY(200000);
|
|
}
|
|
|
|
/* get device info and set params */
|
|
if (bnx2x_get_device_info(sc) != 0) {
|
|
PMD_DRV_LOG(NOTICE, sc, "getting device info");
|
|
return -ENXIO;
|
|
}
|
|
|
|
/* get phy settings from shmem and 'and' against admin settings */
|
|
bnx2x_get_phy_info(sc);
|
|
} else {
|
|
/* Left mac of VF unfilled, PF should set it for VF */
|
|
memset(sc->link_params.mac_addr, 0, RTE_ETHER_ADDR_LEN);
|
|
}
|
|
|
|
sc->wol = 0;
|
|
|
|
/* set the default MTU (changed via ifconfig) */
|
|
sc->mtu = RTE_ETHER_MTU;
|
|
|
|
bnx2x_set_modes_bitmap(sc);
|
|
|
|
/* need to reset chip if UNDI was active */
|
|
if (IS_PF(sc) && !BNX2X_NOMCP(sc)) {
|
|
/* init fw_seq */
|
|
sc->fw_seq =
|
|
(SHMEM_RD(sc, func_mb[SC_FW_MB_IDX(sc)].drv_mb_header) &
|
|
DRV_MSG_SEQ_NUMBER_MASK);
|
|
PMD_DRV_LOG(DEBUG, sc, "prev unload fw_seq 0x%04x",
|
|
sc->fw_seq);
|
|
bnx2x_prev_unload(sc);
|
|
}
|
|
|
|
bnx2x_dcbx_set_state(sc, FALSE, BNX2X_DCBX_ENABLED_OFF);
|
|
|
|
/* calculate qm_cid_count */
|
|
sc->qm_cid_count = bnx2x_set_qm_cid_count(sc);
|
|
|
|
sc->max_cos = 1;
|
|
bnx2x_init_multi_cos(sc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
bnx2x_igu_ack_sb(struct bnx2x_softc *sc, uint8_t igu_sb_id, uint8_t segment,
|
|
uint16_t index, uint8_t op, uint8_t update)
|
|
{
|
|
uint32_t igu_addr = sc->igu_base_addr;
|
|
igu_addr += (IGU_CMD_INT_ACK_BASE + igu_sb_id) * 8;
|
|
bnx2x_igu_ack_sb_gen(sc, segment, index, op, update, igu_addr);
|
|
}
|
|
|
|
static void
|
|
bnx2x_ack_sb(struct bnx2x_softc *sc, uint8_t igu_sb_id, uint8_t storm,
|
|
uint16_t index, uint8_t op, uint8_t update)
|
|
{
|
|
if (unlikely(sc->devinfo.int_block == INT_BLOCK_HC))
|
|
bnx2x_hc_ack_sb(sc, igu_sb_id, storm, index, op, update);
|
|
else {
|
|
uint8_t segment;
|
|
if (CHIP_INT_MODE_IS_BC(sc)) {
|
|
segment = storm;
|
|
} else if (igu_sb_id != sc->igu_dsb_id) {
|
|
segment = IGU_SEG_ACCESS_DEF;
|
|
} else if (storm == ATTENTION_ID) {
|
|
segment = IGU_SEG_ACCESS_ATTN;
|
|
} else {
|
|
segment = IGU_SEG_ACCESS_DEF;
|
|
}
|
|
bnx2x_igu_ack_sb(sc, igu_sb_id, segment, index, op, update);
|
|
}
|
|
}
|
|
|
|
static void
|
|
bnx2x_igu_clear_sb_gen(struct bnx2x_softc *sc, uint8_t func, uint8_t idu_sb_id,
|
|
uint8_t is_pf)
|
|
{
|
|
uint32_t data, ctl, cnt = 100;
|
|
uint32_t igu_addr_data = IGU_REG_COMMAND_REG_32LSB_DATA;
|
|
uint32_t igu_addr_ctl = IGU_REG_COMMAND_REG_CTRL;
|
|
uint32_t igu_addr_ack = IGU_REG_CSTORM_TYPE_0_SB_CLEANUP +
|
|
(idu_sb_id / 32) * 4;
|
|
uint32_t sb_bit = 1 << (idu_sb_id % 32);
|
|
uint32_t func_encode = func |
|
|
(is_pf ? 1 : 0) << IGU_FID_ENCODE_IS_PF_SHIFT;
|
|
uint32_t addr_encode = IGU_CMD_E2_PROD_UPD_BASE + idu_sb_id;
|
|
|
|
/* Not supported in BC mode */
|
|
if (CHIP_INT_MODE_IS_BC(sc)) {
|
|
return;
|
|
}
|
|
|
|
data = ((IGU_USE_REGISTER_cstorm_type_0_sb_cleanup <<
|
|
IGU_REGULAR_CLEANUP_TYPE_SHIFT) |
|
|
IGU_REGULAR_CLEANUP_SET | IGU_REGULAR_BCLEANUP);
|
|
|
|
ctl = ((addr_encode << IGU_CTRL_REG_ADDRESS_SHIFT) |
|
|
(func_encode << IGU_CTRL_REG_FID_SHIFT) |
|
|
(IGU_CTRL_CMD_TYPE_WR << IGU_CTRL_REG_TYPE_SHIFT));
|
|
|
|
REG_WR(sc, igu_addr_data, data);
|
|
|
|
mb();
|
|
|
|
PMD_DRV_LOG(DEBUG, sc, "write 0x%08x to IGU(via GRC) addr 0x%x",
|
|
ctl, igu_addr_ctl);
|
|
REG_WR(sc, igu_addr_ctl, ctl);
|
|
|
|
mb();
|
|
|
|
/* wait for clean up to finish */
|
|
while (!(REG_RD(sc, igu_addr_ack) & sb_bit) && --cnt) {
|
|
DELAY(20000);
|
|
}
|
|
|
|
if (!(REG_RD(sc, igu_addr_ack) & sb_bit)) {
|
|
PMD_DRV_LOG(DEBUG, sc,
|
|
"Unable to finish IGU cleanup: "
|
|
"idu_sb_id %d offset %d bit %d (cnt %d)",
|
|
idu_sb_id, idu_sb_id / 32, idu_sb_id % 32, cnt);
|
|
}
|
|
}
|
|
|
|
static void bnx2x_igu_clear_sb(struct bnx2x_softc *sc, uint8_t idu_sb_id)
|
|
{
|
|
bnx2x_igu_clear_sb_gen(sc, SC_FUNC(sc), idu_sb_id, TRUE /*PF*/);
|
|
}
|
|
|
|
/*******************/
|
|
/* ECORE CALLBACKS */
|
|
/*******************/
|
|
|
|
static void bnx2x_reset_common(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t val = 0x1400;
|
|
|
|
PMD_INIT_FUNC_TRACE(sc);
|
|
|
|
/* reset_common */
|
|
REG_WR(sc, (GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR),
|
|
0xd3ffff7f);
|
|
|
|
if (CHIP_IS_E3(sc)) {
|
|
val |= MISC_REGISTERS_RESET_REG_2_MSTAT0;
|
|
val |= MISC_REGISTERS_RESET_REG_2_MSTAT1;
|
|
}
|
|
|
|
REG_WR(sc, (GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR), val);
|
|
}
|
|
|
|
static void bnx2x_common_init_phy(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t shmem_base[2];
|
|
uint32_t shmem2_base[2];
|
|
|
|
/* Avoid common init in case MFW supports LFA */
|
|
if (SHMEM2_RD(sc, size) >
|
|
(uint32_t) offsetof(struct shmem2_region,
|
|
lfa_host_addr[SC_PORT(sc)])) {
|
|
return;
|
|
}
|
|
|
|
shmem_base[0] = sc->devinfo.shmem_base;
|
|
shmem2_base[0] = sc->devinfo.shmem2_base;
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
shmem_base[1] = SHMEM2_RD(sc, other_shmem_base_addr);
|
|
shmem2_base[1] = SHMEM2_RD(sc, other_shmem2_base_addr);
|
|
}
|
|
|
|
bnx2x_acquire_phy_lock(sc);
|
|
elink_common_init_phy(sc, shmem_base, shmem2_base,
|
|
sc->devinfo.chip_id, 0);
|
|
bnx2x_release_phy_lock(sc);
|
|
}
|
|
|
|
static void bnx2x_pf_disable(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t val = REG_RD(sc, IGU_REG_PF_CONFIGURATION);
|
|
|
|
val &= ~IGU_PF_CONF_FUNC_EN;
|
|
|
|
REG_WR(sc, IGU_REG_PF_CONFIGURATION, val);
|
|
REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0);
|
|
REG_WR(sc, CFC_REG_WEAK_ENABLE_PF, 0);
|
|
}
|
|
|
|
static void bnx2x_init_pxp(struct bnx2x_softc *sc)
|
|
{
|
|
uint16_t devctl;
|
|
int r_order, w_order;
|
|
|
|
devctl = bnx2x_pcie_capability_read(sc, PCIR_EXPRESS_DEVICE_CTL);
|
|
|
|
w_order = ((devctl & PCIM_EXP_CTL_MAX_PAYLOAD) >> 5);
|
|
r_order = ((devctl & PCIM_EXP_CTL_MAX_READ_REQUEST) >> 12);
|
|
|
|
ecore_init_pxp_arb(sc, r_order, w_order);
|
|
}
|
|
|
|
static uint32_t bnx2x_get_pretend_reg(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t base = PXP2_REG_PGL_PRETEND_FUNC_F0;
|
|
uint32_t stride = (PXP2_REG_PGL_PRETEND_FUNC_F1 - base);
|
|
return base + (SC_ABS_FUNC(sc)) * stride;
|
|
}
|
|
|
|
/*
|
|
* Called only on E1H or E2.
|
|
* When pretending to be PF, the pretend value is the function number 0..7.
|
|
* When pretending to be VF, the pretend val is the PF-num:VF-valid:ABS-VFID
|
|
* combination.
|
|
*/
|
|
static int bnx2x_pretend_func(struct bnx2x_softc *sc, uint16_t pretend_func_val)
|
|
{
|
|
uint32_t pretend_reg;
|
|
|
|
if (CHIP_IS_E1H(sc) && (pretend_func_val > E1H_FUNC_MAX))
|
|
return -1;
|
|
|
|
/* get my own pretend register */
|
|
pretend_reg = bnx2x_get_pretend_reg(sc);
|
|
REG_WR(sc, pretend_reg, pretend_func_val);
|
|
REG_RD(sc, pretend_reg);
|
|
return 0;
|
|
}
|
|
|
|
static void bnx2x_setup_fan_failure_detection(struct bnx2x_softc *sc)
|
|
{
|
|
int is_required;
|
|
uint32_t val;
|
|
int port;
|
|
|
|
is_required = 0;
|
|
val = (SHMEM_RD(sc, dev_info.shared_hw_config.config2) &
|
|
SHARED_HW_CFG_FAN_FAILURE_MASK);
|
|
|
|
if (val == SHARED_HW_CFG_FAN_FAILURE_ENABLED) {
|
|
is_required = 1;
|
|
}
|
|
/*
|
|
* The fan failure mechanism is usually related to the PHY type since
|
|
* the power consumption of the board is affected by the PHY. Currently,
|
|
* fan is required for most designs with SFX7101, BNX2X8727 and BNX2X8481.
|
|
*/
|
|
else if (val == SHARED_HW_CFG_FAN_FAILURE_PHY_TYPE) {
|
|
for (port = PORT_0; port < PORT_MAX; port++) {
|
|
is_required |= elink_fan_failure_det_req(sc,
|
|
sc->
|
|
devinfo.shmem_base,
|
|
sc->
|
|
devinfo.shmem2_base,
|
|
port);
|
|
}
|
|
}
|
|
|
|
if (is_required == 0) {
|
|
return;
|
|
}
|
|
|
|
/* Fan failure is indicated by SPIO 5 */
|
|
bnx2x_set_spio(sc, MISC_SPIO_SPIO5, MISC_SPIO_INPUT_HI_Z);
|
|
|
|
/* set to active low mode */
|
|
val = REG_RD(sc, MISC_REG_SPIO_INT);
|
|
val |= (MISC_SPIO_SPIO5 << MISC_SPIO_INT_OLD_SET_POS);
|
|
REG_WR(sc, MISC_REG_SPIO_INT, val);
|
|
|
|
/* enable interrupt to signal the IGU */
|
|
val = REG_RD(sc, MISC_REG_SPIO_EVENT_EN);
|
|
val |= MISC_SPIO_SPIO5;
|
|
REG_WR(sc, MISC_REG_SPIO_EVENT_EN, val);
|
|
}
|
|
|
|
static void bnx2x_enable_blocks_attention(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
|
|
REG_WR(sc, PXP_REG_PXP_INT_MASK_0, 0);
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
REG_WR(sc, PXP_REG_PXP_INT_MASK_1, 0x40);
|
|
} else {
|
|
REG_WR(sc, PXP_REG_PXP_INT_MASK_1, 0);
|
|
}
|
|
REG_WR(sc, DORQ_REG_DORQ_INT_MASK, 0);
|
|
REG_WR(sc, CFC_REG_CFC_INT_MASK, 0);
|
|
/*
|
|
* mask read length error interrupts in brb for parser
|
|
* (parsing unit and 'checksum and crc' unit)
|
|
* these errors are legal (PU reads fixed length and CAC can cause
|
|
* read length error on truncated packets)
|
|
*/
|
|
REG_WR(sc, BRB1_REG_BRB1_INT_MASK, 0xFC00);
|
|
REG_WR(sc, QM_REG_QM_INT_MASK, 0);
|
|
REG_WR(sc, TM_REG_TM_INT_MASK, 0);
|
|
REG_WR(sc, XSDM_REG_XSDM_INT_MASK_0, 0);
|
|
REG_WR(sc, XSDM_REG_XSDM_INT_MASK_1, 0);
|
|
REG_WR(sc, XCM_REG_XCM_INT_MASK, 0);
|
|
/* REG_WR(sc, XSEM_REG_XSEM_INT_MASK_0, 0); */
|
|
/* REG_WR(sc, XSEM_REG_XSEM_INT_MASK_1, 0); */
|
|
REG_WR(sc, USDM_REG_USDM_INT_MASK_0, 0);
|
|
REG_WR(sc, USDM_REG_USDM_INT_MASK_1, 0);
|
|
REG_WR(sc, UCM_REG_UCM_INT_MASK, 0);
|
|
/* REG_WR(sc, USEM_REG_USEM_INT_MASK_0, 0); */
|
|
/* REG_WR(sc, USEM_REG_USEM_INT_MASK_1, 0); */
|
|
REG_WR(sc, GRCBASE_UPB + PB_REG_PB_INT_MASK, 0);
|
|
REG_WR(sc, CSDM_REG_CSDM_INT_MASK_0, 0);
|
|
REG_WR(sc, CSDM_REG_CSDM_INT_MASK_1, 0);
|
|
REG_WR(sc, CCM_REG_CCM_INT_MASK, 0);
|
|
/* REG_WR(sc, CSEM_REG_CSEM_INT_MASK_0, 0); */
|
|
/* REG_WR(sc, CSEM_REG_CSEM_INT_MASK_1, 0); */
|
|
|
|
val = (PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_AFT |
|
|
PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_OF |
|
|
PXP2_PXP2_INT_MASK_0_REG_PGL_PCIE_ATTN);
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
val |= (PXP2_PXP2_INT_MASK_0_REG_PGL_READ_BLOCKED |
|
|
PXP2_PXP2_INT_MASK_0_REG_PGL_WRITE_BLOCKED);
|
|
}
|
|
REG_WR(sc, PXP2_REG_PXP2_INT_MASK_0, val);
|
|
|
|
REG_WR(sc, TSDM_REG_TSDM_INT_MASK_0, 0);
|
|
REG_WR(sc, TSDM_REG_TSDM_INT_MASK_1, 0);
|
|
REG_WR(sc, TCM_REG_TCM_INT_MASK, 0);
|
|
/* REG_WR(sc, TSEM_REG_TSEM_INT_MASK_0, 0); */
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
/* enable VFC attentions: bits 11 and 12, bits 31:13 reserved */
|
|
REG_WR(sc, TSEM_REG_TSEM_INT_MASK_1, 0x07ff);
|
|
}
|
|
|
|
REG_WR(sc, CDU_REG_CDU_INT_MASK, 0);
|
|
REG_WR(sc, DMAE_REG_DMAE_INT_MASK, 0);
|
|
/* REG_WR(sc, MISC_REG_MISC_INT_MASK, 0); */
|
|
REG_WR(sc, PBF_REG_PBF_INT_MASK, 0x18); /* bit 3,4 masked */
|
|
}
|
|
|
|
/**
|
|
* bnx2x_init_hw_common - initialize the HW at the COMMON phase.
|
|
*
|
|
* @sc: driver handle
|
|
*/
|
|
static int bnx2x_init_hw_common(struct bnx2x_softc *sc)
|
|
{
|
|
uint8_t abs_func_id;
|
|
uint32_t val;
|
|
|
|
PMD_DRV_LOG(DEBUG, sc,
|
|
"starting common init for func %d", SC_ABS_FUNC(sc));
|
|
|
|
/*
|
|
* take the RESET lock to protect undi_unload flow from accessing
|
|
* registers while we are resetting the chip
|
|
*/
|
|
bnx2x_acquire_hw_lock(sc, HW_LOCK_RESOURCE_RESET);
|
|
|
|
bnx2x_reset_common(sc);
|
|
|
|
REG_WR(sc, (GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET), 0xffffffff);
|
|
|
|
val = 0xfffc;
|
|
if (CHIP_IS_E3(sc)) {
|
|
val |= MISC_REGISTERS_RESET_REG_2_MSTAT0;
|
|
val |= MISC_REGISTERS_RESET_REG_2_MSTAT1;
|
|
}
|
|
|
|
REG_WR(sc, (GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET), val);
|
|
|
|
bnx2x_release_hw_lock(sc, HW_LOCK_RESOURCE_RESET);
|
|
|
|
ecore_init_block(sc, BLOCK_MISC, PHASE_COMMON);
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
/*
|
|
* 4-port mode or 2-port mode we need to turn off master-enable for
|
|
* everyone. After that we turn it back on for self. So, we disregard
|
|
* multi-function, and always disable all functions on the given path,
|
|
* this means 0,2,4,6 for path 0 and 1,3,5,7 for path 1
|
|
*/
|
|
for (abs_func_id = SC_PATH(sc);
|
|
abs_func_id < (E2_FUNC_MAX * 2); abs_func_id += 2) {
|
|
if (abs_func_id == SC_ABS_FUNC(sc)) {
|
|
REG_WR(sc,
|
|
PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER,
|
|
1);
|
|
continue;
|
|
}
|
|
|
|
bnx2x_pretend_func(sc, abs_func_id);
|
|
|
|
/* clear pf enable */
|
|
bnx2x_pf_disable(sc);
|
|
|
|
bnx2x_pretend_func(sc, SC_ABS_FUNC(sc));
|
|
}
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_PXP, PHASE_COMMON);
|
|
|
|
ecore_init_block(sc, BLOCK_PXP2, PHASE_COMMON);
|
|
bnx2x_init_pxp(sc);
|
|
|
|
#ifdef __BIG_ENDIAN
|
|
REG_WR(sc, PXP2_REG_RQ_QM_ENDIAN_M, 1);
|
|
REG_WR(sc, PXP2_REG_RQ_TM_ENDIAN_M, 1);
|
|
REG_WR(sc, PXP2_REG_RQ_SRC_ENDIAN_M, 1);
|
|
REG_WR(sc, PXP2_REG_RQ_CDU_ENDIAN_M, 1);
|
|
REG_WR(sc, PXP2_REG_RQ_DBG_ENDIAN_M, 1);
|
|
/* make sure this value is 0 */
|
|
REG_WR(sc, PXP2_REG_RQ_HC_ENDIAN_M, 0);
|
|
|
|
//REG_WR(sc, PXP2_REG_RD_PBF_SWAP_MODE, 1);
|
|
REG_WR(sc, PXP2_REG_RD_QM_SWAP_MODE, 1);
|
|
REG_WR(sc, PXP2_REG_RD_TM_SWAP_MODE, 1);
|
|
REG_WR(sc, PXP2_REG_RD_SRC_SWAP_MODE, 1);
|
|
REG_WR(sc, PXP2_REG_RD_CDURD_SWAP_MODE, 1);
|
|
#endif
|
|
|
|
ecore_ilt_init_page_size(sc, INITOP_SET);
|
|
|
|
if (CHIP_REV_IS_FPGA(sc) && CHIP_IS_E1H(sc)) {
|
|
REG_WR(sc, PXP2_REG_PGL_TAGS_LIMIT, 0x1);
|
|
}
|
|
|
|
/* let the HW do it's magic... */
|
|
DELAY(100000);
|
|
|
|
/* finish PXP init */
|
|
|
|
val = REG_RD(sc, PXP2_REG_RQ_CFG_DONE);
|
|
if (val != 1) {
|
|
PMD_DRV_LOG(NOTICE, sc, "PXP2 CFG failed");
|
|
return -1;
|
|
}
|
|
val = REG_RD(sc, PXP2_REG_RD_INIT_DONE);
|
|
if (val != 1) {
|
|
PMD_DRV_LOG(NOTICE, sc, "PXP2 RD_INIT failed");
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* Timer bug workaround for E2 only. We need to set the entire ILT to have
|
|
* entries with value "0" and valid bit on. This needs to be done by the
|
|
* first PF that is loaded in a path (i.e. common phase)
|
|
*/
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
/*
|
|
* In E2 there is a bug in the timers block that can cause function 6 / 7
|
|
* (i.e. vnic3) to start even if it is marked as "scan-off".
|
|
* This occurs when a different function (func2,3) is being marked
|
|
* as "scan-off". Real-life scenario for example: if a driver is being
|
|
* load-unloaded while func6,7 are down. This will cause the timer to access
|
|
* the ilt, translate to a logical address and send a request to read/write.
|
|
* Since the ilt for the function that is down is not valid, this will cause
|
|
* a translation error which is unrecoverable.
|
|
* The Workaround is intended to make sure that when this happens nothing
|
|
* fatal will occur. The workaround:
|
|
* 1. First PF driver which loads on a path will:
|
|
* a. After taking the chip out of reset, by using pretend,
|
|
* it will write "0" to the following registers of
|
|
* the other vnics.
|
|
* REG_WR(pdev, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 0);
|
|
* REG_WR(pdev, CFC_REG_WEAK_ENABLE_PF,0);
|
|
* REG_WR(pdev, CFC_REG_STRONG_ENABLE_PF,0);
|
|
* And for itself it will write '1' to
|
|
* PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER to enable
|
|
* dmae-operations (writing to pram for example.)
|
|
* note: can be done for only function 6,7 but cleaner this
|
|
* way.
|
|
* b. Write zero+valid to the entire ILT.
|
|
* c. Init the first_timers_ilt_entry, last_timers_ilt_entry of
|
|
* VNIC3 (of that port). The range allocated will be the
|
|
* entire ILT. This is needed to prevent ILT range error.
|
|
* 2. Any PF driver load flow:
|
|
* a. ILT update with the physical addresses of the allocated
|
|
* logical pages.
|
|
* b. Wait 20msec. - note that this timeout is needed to make
|
|
* sure there are no requests in one of the PXP internal
|
|
* queues with "old" ILT addresses.
|
|
* c. PF enable in the PGLC.
|
|
* d. Clear the was_error of the PF in the PGLC. (could have
|
|
* occurred while driver was down)
|
|
* e. PF enable in the CFC (WEAK + STRONG)
|
|
* f. Timers scan enable
|
|
* 3. PF driver unload flow:
|
|
* a. Clear the Timers scan_en.
|
|
* b. Polling for scan_on=0 for that PF.
|
|
* c. Clear the PF enable bit in the PXP.
|
|
* d. Clear the PF enable in the CFC (WEAK + STRONG)
|
|
* e. Write zero+valid to all ILT entries (The valid bit must
|
|
* stay set)
|
|
* f. If this is VNIC 3 of a port then also init
|
|
* first_timers_ilt_entry to zero and last_timers_ilt_entry
|
|
* to the last enrty in the ILT.
|
|
*
|
|
* Notes:
|
|
* Currently the PF error in the PGLC is non recoverable.
|
|
* In the future the there will be a recovery routine for this error.
|
|
* Currently attention is masked.
|
|
* Having an MCP lock on the load/unload process does not guarantee that
|
|
* there is no Timer disable during Func6/7 enable. This is because the
|
|
* Timers scan is currently being cleared by the MCP on FLR.
|
|
* Step 2.d can be done only for PF6/7 and the driver can also check if
|
|
* there is error before clearing it. But the flow above is simpler and
|
|
* more general.
|
|
* All ILT entries are written by zero+valid and not just PF6/7
|
|
* ILT entries since in the future the ILT entries allocation for
|
|
* PF-s might be dynamic.
|
|
*/
|
|
struct ilt_client_info ilt_cli;
|
|
struct ecore_ilt ilt;
|
|
|
|
memset(&ilt_cli, 0, sizeof(struct ilt_client_info));
|
|
memset(&ilt, 0, sizeof(struct ecore_ilt));
|
|
|
|
/* initialize dummy TM client */
|
|
ilt_cli.start = 0;
|
|
ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1;
|
|
ilt_cli.client_num = ILT_CLIENT_TM;
|
|
|
|
/*
|
|
* Step 1: set zeroes to all ilt page entries with valid bit on
|
|
* Step 2: set the timers first/last ilt entry to point
|
|
* to the entire range to prevent ILT range error for 3rd/4th
|
|
* vnic (this code assumes existence of the vnic)
|
|
*
|
|
* both steps performed by call to ecore_ilt_client_init_op()
|
|
* with dummy TM client
|
|
*
|
|
* we must use pretend since PXP2_REG_RQ_##blk##_FIRST_ILT
|
|
* and his brother are split registers
|
|
*/
|
|
|
|
bnx2x_pretend_func(sc, (SC_PATH(sc) + 6));
|
|
ecore_ilt_client_init_op_ilt(sc, &ilt, &ilt_cli, INITOP_CLEAR);
|
|
bnx2x_pretend_func(sc, SC_ABS_FUNC(sc));
|
|
|
|
REG_WR(sc, PXP2_REG_RQ_DRAM_ALIGN, BNX2X_PXP_DRAM_ALIGN);
|
|
REG_WR(sc, PXP2_REG_RQ_DRAM_ALIGN_RD, BNX2X_PXP_DRAM_ALIGN);
|
|
REG_WR(sc, PXP2_REG_RQ_DRAM_ALIGN_SEL, 1);
|
|
}
|
|
|
|
REG_WR(sc, PXP2_REG_RQ_DISABLE_INPUTS, 0);
|
|
REG_WR(sc, PXP2_REG_RD_DISABLE_INPUTS, 0);
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
int factor = 0;
|
|
|
|
ecore_init_block(sc, BLOCK_PGLUE_B, PHASE_COMMON);
|
|
ecore_init_block(sc, BLOCK_ATC, PHASE_COMMON);
|
|
|
|
/* let the HW do it's magic... */
|
|
do {
|
|
DELAY(200000);
|
|
val = REG_RD(sc, ATC_REG_ATC_INIT_DONE);
|
|
} while (factor-- && (val != 1));
|
|
|
|
if (val != 1) {
|
|
PMD_DRV_LOG(NOTICE, sc, "ATC_INIT failed");
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_DMAE, PHASE_COMMON);
|
|
|
|
/* clean the DMAE memory */
|
|
sc->dmae_ready = 1;
|
|
ecore_init_fill(sc, TSEM_REG_PRAM, 0, 8, 1);
|
|
|
|
ecore_init_block(sc, BLOCK_TCM, PHASE_COMMON);
|
|
|
|
ecore_init_block(sc, BLOCK_UCM, PHASE_COMMON);
|
|
|
|
ecore_init_block(sc, BLOCK_CCM, PHASE_COMMON);
|
|
|
|
ecore_init_block(sc, BLOCK_XCM, PHASE_COMMON);
|
|
|
|
bnx2x_read_dmae(sc, XSEM_REG_PASSIVE_BUFFER, 3);
|
|
bnx2x_read_dmae(sc, CSEM_REG_PASSIVE_BUFFER, 3);
|
|
bnx2x_read_dmae(sc, TSEM_REG_PASSIVE_BUFFER, 3);
|
|
bnx2x_read_dmae(sc, USEM_REG_PASSIVE_BUFFER, 3);
|
|
|
|
ecore_init_block(sc, BLOCK_QM, PHASE_COMMON);
|
|
|
|
/* QM queues pointers table */
|
|
ecore_qm_init_ptr_table(sc, sc->qm_cid_count, INITOP_SET);
|
|
|
|
/* soft reset pulse */
|
|
REG_WR(sc, QM_REG_SOFT_RESET, 1);
|
|
REG_WR(sc, QM_REG_SOFT_RESET, 0);
|
|
|
|
if (CNIC_SUPPORT(sc))
|
|
ecore_init_block(sc, BLOCK_TM, PHASE_COMMON);
|
|
|
|
ecore_init_block(sc, BLOCK_DORQ, PHASE_COMMON);
|
|
|
|
if (!CHIP_REV_IS_SLOW(sc)) {
|
|
/* enable hw interrupt from doorbell Q */
|
|
REG_WR(sc, DORQ_REG_DORQ_INT_MASK, 0);
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_BRB1, PHASE_COMMON);
|
|
|
|
ecore_init_block(sc, BLOCK_PRS, PHASE_COMMON);
|
|
REG_WR(sc, PRS_REG_A_PRSU_20, 0xf);
|
|
REG_WR(sc, PRS_REG_E1HOV_MODE, sc->devinfo.mf_info.path_has_ovlan);
|
|
|
|
if (!CHIP_IS_E1x(sc) && !CHIP_IS_E3B0(sc)) {
|
|
if (IS_MF_AFEX(sc)) {
|
|
/*
|
|
* configure that AFEX and VLAN headers must be
|
|
* received in AFEX mode
|
|
*/
|
|
REG_WR(sc, PRS_REG_HDRS_AFTER_BASIC, 0xE);
|
|
REG_WR(sc, PRS_REG_MUST_HAVE_HDRS, 0xA);
|
|
REG_WR(sc, PRS_REG_HDRS_AFTER_TAG_0, 0x6);
|
|
REG_WR(sc, PRS_REG_TAG_ETHERTYPE_0, 0x8926);
|
|
REG_WR(sc, PRS_REG_TAG_LEN_0, 0x4);
|
|
} else {
|
|
/*
|
|
* Bit-map indicating which L2 hdrs may appear
|
|
* after the basic Ethernet header
|
|
*/
|
|
REG_WR(sc, PRS_REG_HDRS_AFTER_BASIC,
|
|
sc->devinfo.mf_info.path_has_ovlan ? 7 : 6);
|
|
}
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_TSDM, PHASE_COMMON);
|
|
ecore_init_block(sc, BLOCK_CSDM, PHASE_COMMON);
|
|
ecore_init_block(sc, BLOCK_USDM, PHASE_COMMON);
|
|
ecore_init_block(sc, BLOCK_XSDM, PHASE_COMMON);
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
/* reset VFC memories */
|
|
REG_WR(sc, TSEM_REG_FAST_MEMORY + VFC_REG_MEMORIES_RST,
|
|
VFC_MEMORIES_RST_REG_CAM_RST |
|
|
VFC_MEMORIES_RST_REG_RAM_RST);
|
|
REG_WR(sc, XSEM_REG_FAST_MEMORY + VFC_REG_MEMORIES_RST,
|
|
VFC_MEMORIES_RST_REG_CAM_RST |
|
|
VFC_MEMORIES_RST_REG_RAM_RST);
|
|
|
|
DELAY(20000);
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_TSEM, PHASE_COMMON);
|
|
ecore_init_block(sc, BLOCK_USEM, PHASE_COMMON);
|
|
ecore_init_block(sc, BLOCK_CSEM, PHASE_COMMON);
|
|
ecore_init_block(sc, BLOCK_XSEM, PHASE_COMMON);
|
|
|
|
/* sync semi rtc */
|
|
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, 0x80000000);
|
|
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x80000000);
|
|
|
|
ecore_init_block(sc, BLOCK_UPB, PHASE_COMMON);
|
|
ecore_init_block(sc, BLOCK_XPB, PHASE_COMMON);
|
|
ecore_init_block(sc, BLOCK_PBF, PHASE_COMMON);
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
if (IS_MF_AFEX(sc)) {
|
|
/*
|
|
* configure that AFEX and VLAN headers must be
|
|
* sent in AFEX mode
|
|
*/
|
|
REG_WR(sc, PBF_REG_HDRS_AFTER_BASIC, 0xE);
|
|
REG_WR(sc, PBF_REG_MUST_HAVE_HDRS, 0xA);
|
|
REG_WR(sc, PBF_REG_HDRS_AFTER_TAG_0, 0x6);
|
|
REG_WR(sc, PBF_REG_TAG_ETHERTYPE_0, 0x8926);
|
|
REG_WR(sc, PBF_REG_TAG_LEN_0, 0x4);
|
|
} else {
|
|
REG_WR(sc, PBF_REG_HDRS_AFTER_BASIC,
|
|
sc->devinfo.mf_info.path_has_ovlan ? 7 : 6);
|
|
}
|
|
}
|
|
|
|
REG_WR(sc, SRC_REG_SOFT_RST, 1);
|
|
|
|
ecore_init_block(sc, BLOCK_SRC, PHASE_COMMON);
|
|
|
|
if (CNIC_SUPPORT(sc)) {
|
|
REG_WR(sc, SRC_REG_KEYSEARCH_0, 0x63285672);
|
|
REG_WR(sc, SRC_REG_KEYSEARCH_1, 0x24b8f2cc);
|
|
REG_WR(sc, SRC_REG_KEYSEARCH_2, 0x223aef9b);
|
|
REG_WR(sc, SRC_REG_KEYSEARCH_3, 0x26001e3a);
|
|
REG_WR(sc, SRC_REG_KEYSEARCH_4, 0x7ae91116);
|
|
REG_WR(sc, SRC_REG_KEYSEARCH_5, 0x5ce5230b);
|
|
REG_WR(sc, SRC_REG_KEYSEARCH_6, 0x298d8adf);
|
|
REG_WR(sc, SRC_REG_KEYSEARCH_7, 0x6eb0ff09);
|
|
REG_WR(sc, SRC_REG_KEYSEARCH_8, 0x1830f82f);
|
|
REG_WR(sc, SRC_REG_KEYSEARCH_9, 0x01e46be7);
|
|
}
|
|
REG_WR(sc, SRC_REG_SOFT_RST, 0);
|
|
|
|
if (sizeof(union cdu_context) != 1024) {
|
|
/* we currently assume that a context is 1024 bytes */
|
|
PMD_DRV_LOG(NOTICE, sc,
|
|
"please adjust the size of cdu_context(%ld)",
|
|
(long)sizeof(union cdu_context));
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_CDU, PHASE_COMMON);
|
|
val = (4 << 24) + (0 << 12) + 1024;
|
|
REG_WR(sc, CDU_REG_CDU_GLOBAL_PARAMS, val);
|
|
|
|
ecore_init_block(sc, BLOCK_CFC, PHASE_COMMON);
|
|
|
|
REG_WR(sc, CFC_REG_INIT_REG, 0x7FF);
|
|
/* enable context validation interrupt from CFC */
|
|
REG_WR(sc, CFC_REG_CFC_INT_MASK, 0);
|
|
|
|
/* set the thresholds to prevent CFC/CDU race */
|
|
REG_WR(sc, CFC_REG_DEBUG0, 0x20020000);
|
|
ecore_init_block(sc, BLOCK_HC, PHASE_COMMON);
|
|
|
|
if (!CHIP_IS_E1x(sc) && BNX2X_NOMCP(sc)) {
|
|
REG_WR(sc, IGU_REG_RESET_MEMORIES, 0x36);
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_IGU, PHASE_COMMON);
|
|
ecore_init_block(sc, BLOCK_MISC_AEU, PHASE_COMMON);
|
|
|
|
/* Reset PCIE errors for debug */
|
|
REG_WR(sc, 0x2814, 0xffffffff);
|
|
REG_WR(sc, 0x3820, 0xffffffff);
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
REG_WR(sc, PCICFG_OFFSET + PXPCS_TL_CONTROL_5,
|
|
(PXPCS_TL_CONTROL_5_ERR_UNSPPORT1 |
|
|
PXPCS_TL_CONTROL_5_ERR_UNSPPORT));
|
|
REG_WR(sc, PCICFG_OFFSET + PXPCS_TL_FUNC345_STAT,
|
|
(PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT4 |
|
|
PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT3 |
|
|
PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT2));
|
|
REG_WR(sc, PCICFG_OFFSET + PXPCS_TL_FUNC678_STAT,
|
|
(PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT7 |
|
|
PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT6 |
|
|
PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT5));
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_NIG, PHASE_COMMON);
|
|
|
|
/* in E3 this done in per-port section */
|
|
if (!CHIP_IS_E3(sc))
|
|
REG_WR(sc, NIG_REG_LLH_MF_MODE, IS_MF(sc));
|
|
|
|
if (CHIP_IS_E1H(sc)) {
|
|
/* not applicable for E2 (and above ...) */
|
|
REG_WR(sc, NIG_REG_LLH_E1HOV_MODE, IS_MF_SD(sc));
|
|
}
|
|
|
|
if (CHIP_REV_IS_SLOW(sc)) {
|
|
DELAY(200000);
|
|
}
|
|
|
|
/* finish CFC init */
|
|
val = reg_poll(sc, CFC_REG_LL_INIT_DONE, 1, 100, 10);
|
|
if (val != 1) {
|
|
PMD_DRV_LOG(NOTICE, sc, "CFC LL_INIT failed");
|
|
return -1;
|
|
}
|
|
val = reg_poll(sc, CFC_REG_AC_INIT_DONE, 1, 100, 10);
|
|
if (val != 1) {
|
|
PMD_DRV_LOG(NOTICE, sc, "CFC AC_INIT failed");
|
|
return -1;
|
|
}
|
|
val = reg_poll(sc, CFC_REG_CAM_INIT_DONE, 1, 100, 10);
|
|
if (val != 1) {
|
|
PMD_DRV_LOG(NOTICE, sc, "CFC CAM_INIT failed");
|
|
return -1;
|
|
}
|
|
REG_WR(sc, CFC_REG_DEBUG0, 0);
|
|
|
|
bnx2x_setup_fan_failure_detection(sc);
|
|
|
|
/* clear PXP2 attentions */
|
|
REG_RD(sc, PXP2_REG_PXP2_INT_STS_CLR_0);
|
|
|
|
bnx2x_enable_blocks_attention(sc);
|
|
|
|
if (!CHIP_REV_IS_SLOW(sc)) {
|
|
ecore_enable_blocks_parity(sc);
|
|
}
|
|
|
|
if (!BNX2X_NOMCP(sc)) {
|
|
if (CHIP_IS_E1x(sc)) {
|
|
bnx2x_common_init_phy(sc);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* bnx2x_init_hw_common_chip - init HW at the COMMON_CHIP phase.
|
|
*
|
|
* @sc: driver handle
|
|
*/
|
|
static int bnx2x_init_hw_common_chip(struct bnx2x_softc *sc)
|
|
{
|
|
int rc = bnx2x_init_hw_common(sc);
|
|
|
|
if (rc) {
|
|
return rc;
|
|
}
|
|
|
|
/* In E2 2-PORT mode, same ext phy is used for the two paths */
|
|
if (!BNX2X_NOMCP(sc)) {
|
|
bnx2x_common_init_phy(sc);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_init_hw_port(struct bnx2x_softc *sc)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
int init_phase = port ? PHASE_PORT1 : PHASE_PORT0;
|
|
uint32_t low, high;
|
|
uint32_t val;
|
|
|
|
PMD_DRV_LOG(DEBUG, sc, "starting port init for port %d", port);
|
|
|
|
REG_WR(sc, NIG_REG_MASK_INTERRUPT_PORT0 + port * 4, 0);
|
|
|
|
ecore_init_block(sc, BLOCK_MISC, init_phase);
|
|
ecore_init_block(sc, BLOCK_PXP, init_phase);
|
|
ecore_init_block(sc, BLOCK_PXP2, init_phase);
|
|
|
|
/*
|
|
* Timers bug workaround: disables the pf_master bit in pglue at
|
|
* common phase, we need to enable it here before any dmae access are
|
|
* attempted. Therefore we manually added the enable-master to the
|
|
* port phase (it also happens in the function phase)
|
|
*/
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1);
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_ATC, init_phase);
|
|
ecore_init_block(sc, BLOCK_DMAE, init_phase);
|
|
ecore_init_block(sc, BLOCK_PGLUE_B, init_phase);
|
|
ecore_init_block(sc, BLOCK_QM, init_phase);
|
|
|
|
ecore_init_block(sc, BLOCK_TCM, init_phase);
|
|
ecore_init_block(sc, BLOCK_UCM, init_phase);
|
|
ecore_init_block(sc, BLOCK_CCM, init_phase);
|
|
ecore_init_block(sc, BLOCK_XCM, init_phase);
|
|
|
|
/* QM cid (connection) count */
|
|
ecore_qm_init_cid_count(sc, sc->qm_cid_count, INITOP_SET);
|
|
|
|
if (CNIC_SUPPORT(sc)) {
|
|
ecore_init_block(sc, BLOCK_TM, init_phase);
|
|
REG_WR(sc, TM_REG_LIN0_SCAN_TIME + port * 4, 20);
|
|
REG_WR(sc, TM_REG_LIN0_MAX_ACTIVE_CID + port * 4, 31);
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_DORQ, init_phase);
|
|
|
|
ecore_init_block(sc, BLOCK_BRB1, init_phase);
|
|
|
|
if (CHIP_IS_E1H(sc)) {
|
|
if (IS_MF(sc)) {
|
|
low = (BNX2X_ONE_PORT(sc) ? 160 : 246);
|
|
} else if (sc->mtu > 4096) {
|
|
if (BNX2X_ONE_PORT(sc)) {
|
|
low = 160;
|
|
} else {
|
|
val = sc->mtu;
|
|
/* (24*1024 + val*4)/256 */
|
|
low = (96 + (val / 64) + ((val % 64) ? 1 : 0));
|
|
}
|
|
} else {
|
|
low = (BNX2X_ONE_PORT(sc) ? 80 : 160);
|
|
}
|
|
high = (low + 56); /* 14*1024/256 */
|
|
REG_WR(sc, BRB1_REG_PAUSE_LOW_THRESHOLD_0 + port * 4, low);
|
|
REG_WR(sc, BRB1_REG_PAUSE_HIGH_THRESHOLD_0 + port * 4, high);
|
|
}
|
|
|
|
if (CHIP_IS_MODE_4_PORT(sc)) {
|
|
REG_WR(sc, SC_PORT(sc) ?
|
|
BRB1_REG_MAC_GUARANTIED_1 :
|
|
BRB1_REG_MAC_GUARANTIED_0, 40);
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_PRS, init_phase);
|
|
if (CHIP_IS_E3B0(sc)) {
|
|
if (IS_MF_AFEX(sc)) {
|
|
/* configure headers for AFEX mode */
|
|
if (SC_PORT(sc)) {
|
|
REG_WR(sc, PRS_REG_HDRS_AFTER_BASIC_PORT_1,
|
|
0xE);
|
|
REG_WR(sc, PRS_REG_HDRS_AFTER_TAG_0_PORT_1,
|
|
0x6);
|
|
REG_WR(sc, PRS_REG_MUST_HAVE_HDRS_PORT_1, 0xA);
|
|
} else {
|
|
REG_WR(sc, PRS_REG_HDRS_AFTER_BASIC_PORT_0,
|
|
0xE);
|
|
REG_WR(sc, PRS_REG_HDRS_AFTER_TAG_0_PORT_0,
|
|
0x6);
|
|
REG_WR(sc, PRS_REG_MUST_HAVE_HDRS_PORT_0, 0xA);
|
|
}
|
|
} else {
|
|
/* Ovlan exists only if we are in multi-function +
|
|
* switch-dependent mode, in switch-independent there
|
|
* is no ovlan headers
|
|
*/
|
|
REG_WR(sc, SC_PORT(sc) ?
|
|
PRS_REG_HDRS_AFTER_BASIC_PORT_1 :
|
|
PRS_REG_HDRS_AFTER_BASIC_PORT_0,
|
|
(sc->devinfo.mf_info.path_has_ovlan ? 7 : 6));
|
|
}
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_TSDM, init_phase);
|
|
ecore_init_block(sc, BLOCK_CSDM, init_phase);
|
|
ecore_init_block(sc, BLOCK_USDM, init_phase);
|
|
ecore_init_block(sc, BLOCK_XSDM, init_phase);
|
|
|
|
ecore_init_block(sc, BLOCK_TSEM, init_phase);
|
|
ecore_init_block(sc, BLOCK_USEM, init_phase);
|
|
ecore_init_block(sc, BLOCK_CSEM, init_phase);
|
|
ecore_init_block(sc, BLOCK_XSEM, init_phase);
|
|
|
|
ecore_init_block(sc, BLOCK_UPB, init_phase);
|
|
ecore_init_block(sc, BLOCK_XPB, init_phase);
|
|
|
|
ecore_init_block(sc, BLOCK_PBF, init_phase);
|
|
|
|
if (CHIP_IS_E1x(sc)) {
|
|
/* configure PBF to work without PAUSE mtu 9000 */
|
|
REG_WR(sc, PBF_REG_P0_PAUSE_ENABLE + port * 4, 0);
|
|
|
|
/* update threshold */
|
|
REG_WR(sc, PBF_REG_P0_ARB_THRSH + port * 4, (9040 / 16));
|
|
/* update init credit */
|
|
REG_WR(sc, PBF_REG_P0_INIT_CRD + port * 4,
|
|
(9040 / 16) + 553 - 22);
|
|
|
|
/* probe changes */
|
|
REG_WR(sc, PBF_REG_INIT_P0 + port * 4, 1);
|
|
DELAY(50);
|
|
REG_WR(sc, PBF_REG_INIT_P0 + port * 4, 0);
|
|
}
|
|
|
|
if (CNIC_SUPPORT(sc)) {
|
|
ecore_init_block(sc, BLOCK_SRC, init_phase);
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_CDU, init_phase);
|
|
ecore_init_block(sc, BLOCK_CFC, init_phase);
|
|
ecore_init_block(sc, BLOCK_HC, init_phase);
|
|
ecore_init_block(sc, BLOCK_IGU, init_phase);
|
|
ecore_init_block(sc, BLOCK_MISC_AEU, init_phase);
|
|
/* init aeu_mask_attn_func_0/1:
|
|
* - SF mode: bits 3-7 are masked. only bits 0-2 are in use
|
|
* - MF mode: bit 3 is masked. bits 0-2 are in use as in SF
|
|
* bits 4-7 are used for "per vn group attention" */
|
|
val = IS_MF(sc) ? 0xF7 : 0x7;
|
|
val |= 0x10;
|
|
REG_WR(sc, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port * 4, val);
|
|
|
|
ecore_init_block(sc, BLOCK_NIG, init_phase);
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
/* Bit-map indicating which L2 hdrs may appear after the
|
|
* basic Ethernet header
|
|
*/
|
|
if (IS_MF_AFEX(sc)) {
|
|
REG_WR(sc, SC_PORT(sc) ?
|
|
NIG_REG_P1_HDRS_AFTER_BASIC :
|
|
NIG_REG_P0_HDRS_AFTER_BASIC, 0xE);
|
|
} else {
|
|
REG_WR(sc, SC_PORT(sc) ?
|
|
NIG_REG_P1_HDRS_AFTER_BASIC :
|
|
NIG_REG_P0_HDRS_AFTER_BASIC,
|
|
IS_MF_SD(sc) ? 7 : 6);
|
|
}
|
|
|
|
if (CHIP_IS_E3(sc)) {
|
|
REG_WR(sc, SC_PORT(sc) ?
|
|
NIG_REG_LLH1_MF_MODE :
|
|
NIG_REG_LLH_MF_MODE, IS_MF(sc));
|
|
}
|
|
}
|
|
if (!CHIP_IS_E3(sc)) {
|
|
REG_WR(sc, NIG_REG_XGXS_SERDES0_MODE_SEL + port * 4, 1);
|
|
}
|
|
|
|
/* 0x2 disable mf_ov, 0x1 enable */
|
|
REG_WR(sc, NIG_REG_LLH0_BRB1_DRV_MASK_MF + port * 4,
|
|
(IS_MF_SD(sc) ? 0x1 : 0x2));
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
val = 0;
|
|
switch (sc->devinfo.mf_info.mf_mode) {
|
|
case MULTI_FUNCTION_SD:
|
|
val = 1;
|
|
break;
|
|
case MULTI_FUNCTION_SI:
|
|
case MULTI_FUNCTION_AFEX:
|
|
val = 2;
|
|
break;
|
|
}
|
|
|
|
REG_WR(sc, (SC_PORT(sc) ? NIG_REG_LLH1_CLS_TYPE :
|
|
NIG_REG_LLH0_CLS_TYPE), val);
|
|
}
|
|
REG_WR(sc, NIG_REG_LLFC_ENABLE_0 + port * 4, 0);
|
|
REG_WR(sc, NIG_REG_LLFC_OUT_EN_0 + port * 4, 0);
|
|
REG_WR(sc, NIG_REG_PAUSE_ENABLE_0 + port * 4, 1);
|
|
|
|
/* If SPIO5 is set to generate interrupts, enable it for this port */
|
|
val = REG_RD(sc, MISC_REG_SPIO_EVENT_EN);
|
|
if (val & MISC_SPIO_SPIO5) {
|
|
uint32_t reg_addr = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
|
|
MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
|
|
val = REG_RD(sc, reg_addr);
|
|
val |= AEU_INPUTS_ATTN_BITS_SPIO5;
|
|
REG_WR(sc, reg_addr, val);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static uint32_t
|
|
bnx2x_flr_clnup_reg_poll(struct bnx2x_softc *sc, uint32_t reg,
|
|
uint32_t expected, uint32_t poll_count)
|
|
{
|
|
uint32_t cur_cnt = poll_count;
|
|
uint32_t val;
|
|
|
|
while ((val = REG_RD(sc, reg)) != expected && cur_cnt--) {
|
|
DELAY(FLR_WAIT_INTERVAL);
|
|
}
|
|
|
|
return val;
|
|
}
|
|
|
|
static int
|
|
bnx2x_flr_clnup_poll_hw_counter(struct bnx2x_softc *sc, uint32_t reg,
|
|
__rte_unused const char *msg, uint32_t poll_cnt)
|
|
{
|
|
uint32_t val = bnx2x_flr_clnup_reg_poll(sc, reg, 0, poll_cnt);
|
|
|
|
if (val != 0) {
|
|
PMD_DRV_LOG(NOTICE, sc, "%s usage count=%d", msg, val);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Common routines with VF FLR cleanup */
|
|
static uint32_t bnx2x_flr_clnup_poll_count(struct bnx2x_softc *sc)
|
|
{
|
|
/* adjust polling timeout */
|
|
if (CHIP_REV_IS_EMUL(sc)) {
|
|
return FLR_POLL_CNT * 2000;
|
|
}
|
|
|
|
if (CHIP_REV_IS_FPGA(sc)) {
|
|
return FLR_POLL_CNT * 120;
|
|
}
|
|
|
|
return FLR_POLL_CNT;
|
|
}
|
|
|
|
static int bnx2x_poll_hw_usage_counters(struct bnx2x_softc *sc, uint32_t poll_cnt)
|
|
{
|
|
/* wait for CFC PF usage-counter to zero (includes all the VFs) */
|
|
if (bnx2x_flr_clnup_poll_hw_counter(sc,
|
|
CFC_REG_NUM_LCIDS_INSIDE_PF,
|
|
"CFC PF usage counter timed out",
|
|
poll_cnt)) {
|
|
return -1;
|
|
}
|
|
|
|
/* Wait for DQ PF usage-counter to zero (until DQ cleanup) */
|
|
if (bnx2x_flr_clnup_poll_hw_counter(sc,
|
|
DORQ_REG_PF_USAGE_CNT,
|
|
"DQ PF usage counter timed out",
|
|
poll_cnt)) {
|
|
return -1;
|
|
}
|
|
|
|
/* Wait for QM PF usage-counter to zero (until DQ cleanup) */
|
|
if (bnx2x_flr_clnup_poll_hw_counter(sc,
|
|
QM_REG_PF_USG_CNT_0 + 4 * SC_FUNC(sc),
|
|
"QM PF usage counter timed out",
|
|
poll_cnt)) {
|
|
return -1;
|
|
}
|
|
|
|
/* Wait for Timer PF usage-counters to zero (until DQ cleanup) */
|
|
if (bnx2x_flr_clnup_poll_hw_counter(sc,
|
|
TM_REG_LIN0_VNIC_UC + 4 * SC_PORT(sc),
|
|
"Timers VNIC usage counter timed out",
|
|
poll_cnt)) {
|
|
return -1;
|
|
}
|
|
|
|
if (bnx2x_flr_clnup_poll_hw_counter(sc,
|
|
TM_REG_LIN0_NUM_SCANS +
|
|
4 * SC_PORT(sc),
|
|
"Timers NUM_SCANS usage counter timed out",
|
|
poll_cnt)) {
|
|
return -1;
|
|
}
|
|
|
|
/* Wait DMAE PF usage counter to zero */
|
|
if (bnx2x_flr_clnup_poll_hw_counter(sc,
|
|
dmae_reg_go_c[INIT_DMAE_C(sc)],
|
|
"DMAE dommand register timed out",
|
|
poll_cnt)) {
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define OP_GEN_PARAM(param) \
|
|
(((param) << SDM_OP_GEN_COMP_PARAM_SHIFT) & SDM_OP_GEN_COMP_PARAM)
|
|
#define OP_GEN_TYPE(type) \
|
|
(((type) << SDM_OP_GEN_COMP_TYPE_SHIFT) & SDM_OP_GEN_COMP_TYPE)
|
|
#define OP_GEN_AGG_VECT(index) \
|
|
(((index) << SDM_OP_GEN_AGG_VECT_IDX_SHIFT) & SDM_OP_GEN_AGG_VECT_IDX)
|
|
|
|
static int
|
|
bnx2x_send_final_clnup(struct bnx2x_softc *sc, uint8_t clnup_func,
|
|
uint32_t poll_cnt)
|
|
{
|
|
uint32_t op_gen_command = 0;
|
|
uint32_t comp_addr = (BAR_CSTRORM_INTMEM +
|
|
CSTORM_FINAL_CLEANUP_COMPLETE_OFFSET(clnup_func));
|
|
int ret = 0;
|
|
|
|
if (REG_RD(sc, comp_addr)) {
|
|
PMD_DRV_LOG(NOTICE, sc,
|
|
"Cleanup complete was not 0 before sending");
|
|
return -1;
|
|
}
|
|
|
|
op_gen_command |= OP_GEN_PARAM(XSTORM_AGG_INT_FINAL_CLEANUP_INDEX);
|
|
op_gen_command |= OP_GEN_TYPE(XSTORM_AGG_INT_FINAL_CLEANUP_COMP_TYPE);
|
|
op_gen_command |= OP_GEN_AGG_VECT(clnup_func);
|
|
op_gen_command |= 1 << SDM_OP_GEN_AGG_VECT_IDX_VALID_SHIFT;
|
|
|
|
REG_WR(sc, XSDM_REG_OPERATION_GEN, op_gen_command);
|
|
|
|
if (bnx2x_flr_clnup_reg_poll(sc, comp_addr, 1, poll_cnt) != 1) {
|
|
PMD_DRV_LOG(NOTICE, sc, "FW final cleanup did not succeed");
|
|
PMD_DRV_LOG(DEBUG, sc, "At timeout completion address contained %x",
|
|
(REG_RD(sc, comp_addr)));
|
|
rte_panic("FLR cleanup failed");
|
|
return -1;
|
|
}
|
|
|
|
/* Zero completion for nxt FLR */
|
|
REG_WR(sc, comp_addr, 0);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void
|
|
bnx2x_pbf_pN_buf_flushed(struct bnx2x_softc *sc, struct pbf_pN_buf_regs *regs,
|
|
uint32_t poll_count)
|
|
{
|
|
uint32_t init_crd, crd, crd_start, crd_freed, crd_freed_start;
|
|
uint32_t cur_cnt = poll_count;
|
|
|
|
crd_freed = crd_freed_start = REG_RD(sc, regs->crd_freed);
|
|
crd = crd_start = REG_RD(sc, regs->crd);
|
|
init_crd = REG_RD(sc, regs->init_crd);
|
|
|
|
while ((crd != init_crd) &&
|
|
((uint32_t) ((int32_t) crd_freed - (int32_t) crd_freed_start) <
|
|
(init_crd - crd_start))) {
|
|
if (cur_cnt--) {
|
|
DELAY(FLR_WAIT_INTERVAL);
|
|
crd = REG_RD(sc, regs->crd);
|
|
crd_freed = REG_RD(sc, regs->crd_freed);
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
bnx2x_pbf_pN_cmd_flushed(struct bnx2x_softc *sc, struct pbf_pN_cmd_regs *regs,
|
|
uint32_t poll_count)
|
|
{
|
|
uint32_t occup, to_free, freed, freed_start;
|
|
uint32_t cur_cnt = poll_count;
|
|
|
|
occup = to_free = REG_RD(sc, regs->lines_occup);
|
|
freed = freed_start = REG_RD(sc, regs->lines_freed);
|
|
|
|
while (occup &&
|
|
((uint32_t) ((int32_t) freed - (int32_t) freed_start) <
|
|
to_free)) {
|
|
if (cur_cnt--) {
|
|
DELAY(FLR_WAIT_INTERVAL);
|
|
occup = REG_RD(sc, regs->lines_occup);
|
|
freed = REG_RD(sc, regs->lines_freed);
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void bnx2x_tx_hw_flushed(struct bnx2x_softc *sc, uint32_t poll_count)
|
|
{
|
|
struct pbf_pN_cmd_regs cmd_regs[] = {
|
|
{0, (CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_TQ_OCCUPANCY_Q0 : PBF_REG_P0_TQ_OCCUPANCY,
|
|
(CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_TQ_LINES_FREED_CNT_Q0 : PBF_REG_P0_TQ_LINES_FREED_CNT},
|
|
{1, (CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_TQ_OCCUPANCY_Q1 : PBF_REG_P1_TQ_OCCUPANCY,
|
|
(CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_TQ_LINES_FREED_CNT_Q1 : PBF_REG_P1_TQ_LINES_FREED_CNT},
|
|
{4, (CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_TQ_OCCUPANCY_LB_Q : PBF_REG_P4_TQ_OCCUPANCY,
|
|
(CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_TQ_LINES_FREED_CNT_LB_Q :
|
|
PBF_REG_P4_TQ_LINES_FREED_CNT}
|
|
};
|
|
|
|
struct pbf_pN_buf_regs buf_regs[] = {
|
|
{0, (CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_INIT_CRD_Q0 : PBF_REG_P0_INIT_CRD,
|
|
(CHIP_IS_E3B0(sc)) ? PBF_REG_CREDIT_Q0 : PBF_REG_P0_CREDIT,
|
|
(CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_INTERNAL_CRD_FREED_CNT_Q0 :
|
|
PBF_REG_P0_INTERNAL_CRD_FREED_CNT},
|
|
{1, (CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_INIT_CRD_Q1 : PBF_REG_P1_INIT_CRD,
|
|
(CHIP_IS_E3B0(sc)) ? PBF_REG_CREDIT_Q1 : PBF_REG_P1_CREDIT,
|
|
(CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_INTERNAL_CRD_FREED_CNT_Q1 :
|
|
PBF_REG_P1_INTERNAL_CRD_FREED_CNT},
|
|
{4, (CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_INIT_CRD_LB_Q : PBF_REG_P4_INIT_CRD,
|
|
(CHIP_IS_E3B0(sc)) ? PBF_REG_CREDIT_LB_Q : PBF_REG_P4_CREDIT,
|
|
(CHIP_IS_E3B0(sc)) ?
|
|
PBF_REG_INTERNAL_CRD_FREED_CNT_LB_Q :
|
|
PBF_REG_P4_INTERNAL_CRD_FREED_CNT},
|
|
};
|
|
|
|
uint32_t i;
|
|
|
|
/* Verify the command queues are flushed P0, P1, P4 */
|
|
for (i = 0; i < ARRAY_SIZE(cmd_regs); i++) {
|
|
bnx2x_pbf_pN_cmd_flushed(sc, &cmd_regs[i], poll_count);
|
|
}
|
|
|
|
/* Verify the transmission buffers are flushed P0, P1, P4 */
|
|
for (i = 0; i < ARRAY_SIZE(buf_regs); i++) {
|
|
bnx2x_pbf_pN_buf_flushed(sc, &buf_regs[i], poll_count);
|
|
}
|
|
}
|
|
|
|
static void bnx2x_hw_enable_status(struct bnx2x_softc *sc)
|
|
{
|
|
__rte_unused uint32_t val;
|
|
|
|
val = REG_RD(sc, CFC_REG_WEAK_ENABLE_PF);
|
|
PMD_DRV_LOG(DEBUG, sc, "CFC_REG_WEAK_ENABLE_PF is 0x%x", val);
|
|
|
|
val = REG_RD(sc, PBF_REG_DISABLE_PF);
|
|
PMD_DRV_LOG(DEBUG, sc, "PBF_REG_DISABLE_PF is 0x%x", val);
|
|
|
|
val = REG_RD(sc, IGU_REG_PCI_PF_MSI_EN);
|
|
PMD_DRV_LOG(DEBUG, sc, "IGU_REG_PCI_PF_MSI_EN is 0x%x", val);
|
|
|
|
val = REG_RD(sc, IGU_REG_PCI_PF_MSIX_EN);
|
|
PMD_DRV_LOG(DEBUG, sc, "IGU_REG_PCI_PF_MSIX_EN is 0x%x", val);
|
|
|
|
val = REG_RD(sc, IGU_REG_PCI_PF_MSIX_FUNC_MASK);
|
|
PMD_DRV_LOG(DEBUG, sc, "IGU_REG_PCI_PF_MSIX_FUNC_MASK is 0x%x", val);
|
|
|
|
val = REG_RD(sc, PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR);
|
|
PMD_DRV_LOG(DEBUG, sc,
|
|
"PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR is 0x%x", val);
|
|
|
|
val = REG_RD(sc, PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR);
|
|
PMD_DRV_LOG(DEBUG, sc,
|
|
"PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR is 0x%x", val);
|
|
|
|
val = REG_RD(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER);
|
|
PMD_DRV_LOG(DEBUG, sc, "PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER is 0x%x",
|
|
val);
|
|
}
|
|
|
|
/**
|
|
* bnx2x_pf_flr_clnup
|
|
* a. re-enable target read on the PF
|
|
* b. poll cfc per function usgae counter
|
|
* c. poll the qm perfunction usage counter
|
|
* d. poll the tm per function usage counter
|
|
* e. poll the tm per function scan-done indication
|
|
* f. clear the dmae channel associated wit hthe PF
|
|
* g. zero the igu 'trailing edge' and 'leading edge' regs (attentions)
|
|
* h. call the common flr cleanup code with -1 (pf indication)
|
|
*/
|
|
static int bnx2x_pf_flr_clnup(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t poll_cnt = bnx2x_flr_clnup_poll_count(sc);
|
|
|
|
/* Re-enable PF target read access */
|
|
REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1);
|
|
|
|
/* Poll HW usage counters */
|
|
if (bnx2x_poll_hw_usage_counters(sc, poll_cnt)) {
|
|
return -1;
|
|
}
|
|
|
|
/* Zero the igu 'trailing edge' and 'leading edge' */
|
|
|
|
/* Send the FW cleanup command */
|
|
if (bnx2x_send_final_clnup(sc, (uint8_t) SC_FUNC(sc), poll_cnt)) {
|
|
return -1;
|
|
}
|
|
|
|
/* ATC cleanup */
|
|
|
|
/* Verify TX hw is flushed */
|
|
bnx2x_tx_hw_flushed(sc, poll_cnt);
|
|
|
|
/* Wait 100ms (not adjusted according to platform) */
|
|
DELAY(100000);
|
|
|
|
/* Verify no pending pci transactions */
|
|
if (bnx2x_is_pcie_pending(sc)) {
|
|
PMD_DRV_LOG(NOTICE, sc, "PCIE Transactions still pending");
|
|
}
|
|
|
|
/* Debug */
|
|
bnx2x_hw_enable_status(sc);
|
|
|
|
/*
|
|
* Master enable - Due to WB DMAE writes performed before this
|
|
* register is re-initialized as part of the regular function init
|
|
*/
|
|
REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bnx2x_init_hw_func(struct bnx2x_softc *sc)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
int func = SC_FUNC(sc);
|
|
int init_phase = PHASE_PF0 + func;
|
|
struct ecore_ilt *ilt = sc->ilt;
|
|
uint16_t cdu_ilt_start;
|
|
uint32_t addr, val;
|
|
uint32_t main_mem_base, main_mem_size, main_mem_prty_clr;
|
|
int main_mem_width, rc;
|
|
uint32_t i;
|
|
|
|
PMD_DRV_LOG(DEBUG, sc, "starting func init for func %d", func);
|
|
|
|
/* FLR cleanup */
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
rc = bnx2x_pf_flr_clnup(sc);
|
|
if (rc) {
|
|
PMD_DRV_LOG(NOTICE, sc, "FLR cleanup failed!");
|
|
return rc;
|
|
}
|
|
}
|
|
|
|
/* set MSI reconfigure capability */
|
|
if (sc->devinfo.int_block == INT_BLOCK_HC) {
|
|
addr = (port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0);
|
|
val = REG_RD(sc, addr);
|
|
val |= HC_CONFIG_0_REG_MSI_ATTN_EN_0;
|
|
REG_WR(sc, addr, val);
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_PXP, init_phase);
|
|
ecore_init_block(sc, BLOCK_PXP2, init_phase);
|
|
|
|
ilt = sc->ilt;
|
|
cdu_ilt_start = ilt->clients[ILT_CLIENT_CDU].start;
|
|
|
|
for (i = 0; i < L2_ILT_LINES(sc); i++) {
|
|
ilt->lines[cdu_ilt_start + i].page = sc->context[i].vcxt;
|
|
ilt->lines[cdu_ilt_start + i].page_mapping =
|
|
(rte_iova_t)sc->context[i].vcxt_dma.paddr;
|
|
ilt->lines[cdu_ilt_start + i].size = sc->context[i].size;
|
|
}
|
|
ecore_ilt_init_op(sc, INITOP_SET);
|
|
|
|
REG_WR(sc, PRS_REG_NIC_MODE, 1);
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
uint32_t pf_conf = IGU_PF_CONF_FUNC_EN;
|
|
|
|
/* Turn on a single ISR mode in IGU if driver is going to use
|
|
* INT#x or MSI
|
|
*/
|
|
if ((sc->interrupt_mode != INTR_MODE_MSIX)
|
|
|| (sc->interrupt_mode != INTR_MODE_SINGLE_MSIX)) {
|
|
pf_conf |= IGU_PF_CONF_SINGLE_ISR_EN;
|
|
}
|
|
|
|
/*
|
|
* Timers workaround bug: function init part.
|
|
* Need to wait 20msec after initializing ILT,
|
|
* needed to make sure there are no requests in
|
|
* one of the PXP internal queues with "old" ILT addresses
|
|
*/
|
|
DELAY(20000);
|
|
|
|
/*
|
|
* Master enable - Due to WB DMAE writes performed before this
|
|
* register is re-initialized as part of the regular function
|
|
* init
|
|
*/
|
|
REG_WR(sc, PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER, 1);
|
|
/* Enable the function in IGU */
|
|
REG_WR(sc, IGU_REG_PF_CONFIGURATION, pf_conf);
|
|
}
|
|
|
|
sc->dmae_ready = 1;
|
|
|
|
ecore_init_block(sc, BLOCK_PGLUE_B, init_phase);
|
|
|
|
if (!CHIP_IS_E1x(sc))
|
|
REG_WR(sc, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR, func);
|
|
|
|
ecore_init_block(sc, BLOCK_ATC, init_phase);
|
|
ecore_init_block(sc, BLOCK_DMAE, init_phase);
|
|
ecore_init_block(sc, BLOCK_NIG, init_phase);
|
|
ecore_init_block(sc, BLOCK_SRC, init_phase);
|
|
ecore_init_block(sc, BLOCK_MISC, init_phase);
|
|
ecore_init_block(sc, BLOCK_TCM, init_phase);
|
|
ecore_init_block(sc, BLOCK_UCM, init_phase);
|
|
ecore_init_block(sc, BLOCK_CCM, init_phase);
|
|
ecore_init_block(sc, BLOCK_XCM, init_phase);
|
|
ecore_init_block(sc, BLOCK_TSEM, init_phase);
|
|
ecore_init_block(sc, BLOCK_USEM, init_phase);
|
|
ecore_init_block(sc, BLOCK_CSEM, init_phase);
|
|
ecore_init_block(sc, BLOCK_XSEM, init_phase);
|
|
|
|
if (!CHIP_IS_E1x(sc))
|
|
REG_WR(sc, QM_REG_PF_EN, 1);
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
REG_WR(sc, TSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
|
|
REG_WR(sc, USEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
|
|
REG_WR(sc, CSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
|
|
REG_WR(sc, XSEM_REG_VFPF_ERR_NUM, BNX2X_MAX_NUM_OF_VFS + func);
|
|
}
|
|
ecore_init_block(sc, BLOCK_QM, init_phase);
|
|
|
|
ecore_init_block(sc, BLOCK_TM, init_phase);
|
|
ecore_init_block(sc, BLOCK_DORQ, init_phase);
|
|
|
|
ecore_init_block(sc, BLOCK_BRB1, init_phase);
|
|
ecore_init_block(sc, BLOCK_PRS, init_phase);
|
|
ecore_init_block(sc, BLOCK_TSDM, init_phase);
|
|
ecore_init_block(sc, BLOCK_CSDM, init_phase);
|
|
ecore_init_block(sc, BLOCK_USDM, init_phase);
|
|
ecore_init_block(sc, BLOCK_XSDM, init_phase);
|
|
ecore_init_block(sc, BLOCK_UPB, init_phase);
|
|
ecore_init_block(sc, BLOCK_XPB, init_phase);
|
|
ecore_init_block(sc, BLOCK_PBF, init_phase);
|
|
if (!CHIP_IS_E1x(sc))
|
|
REG_WR(sc, PBF_REG_DISABLE_PF, 0);
|
|
|
|
ecore_init_block(sc, BLOCK_CDU, init_phase);
|
|
|
|
ecore_init_block(sc, BLOCK_CFC, init_phase);
|
|
|
|
if (!CHIP_IS_E1x(sc))
|
|
REG_WR(sc, CFC_REG_WEAK_ENABLE_PF, 1);
|
|
|
|
if (IS_MF(sc)) {
|
|
REG_WR(sc, NIG_REG_LLH0_FUNC_EN + port * 8, 1);
|
|
REG_WR(sc, NIG_REG_LLH0_FUNC_VLAN_ID + port * 8, OVLAN(sc));
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_MISC_AEU, init_phase);
|
|
|
|
/* HC init per function */
|
|
if (sc->devinfo.int_block == INT_BLOCK_HC) {
|
|
if (CHIP_IS_E1H(sc)) {
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_12 + func * 4, 0);
|
|
|
|
REG_WR(sc, HC_REG_LEADING_EDGE_0 + port * 8, 0);
|
|
REG_WR(sc, HC_REG_TRAILING_EDGE_0 + port * 8, 0);
|
|
}
|
|
ecore_init_block(sc, BLOCK_HC, init_phase);
|
|
|
|
} else {
|
|
uint32_t num_segs, sb_idx, prod_offset;
|
|
|
|
REG_WR(sc, MISC_REG_AEU_GENERAL_ATTN_12 + func * 4, 0);
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
REG_WR(sc, IGU_REG_LEADING_EDGE_LATCH, 0);
|
|
REG_WR(sc, IGU_REG_TRAILING_EDGE_LATCH, 0);
|
|
}
|
|
|
|
ecore_init_block(sc, BLOCK_IGU, init_phase);
|
|
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
int dsb_idx = 0;
|
|
/**
|
|
* Producer memory:
|
|
* E2 mode: address 0-135 match to the mapping memory;
|
|
* 136 - PF0 default prod; 137 - PF1 default prod;
|
|
* 138 - PF2 default prod; 139 - PF3 default prod;
|
|
* 140 - PF0 attn prod; 141 - PF1 attn prod;
|
|
* 142 - PF2 attn prod; 143 - PF3 attn prod;
|
|
* 144-147 reserved.
|
|
*
|
|
* E1.5 mode - In backward compatible mode;
|
|
* for non default SB; each even line in the memory
|
|
* holds the U producer and each odd line hold
|
|
* the C producer. The first 128 producers are for
|
|
* NDSB (PF0 - 0-31; PF1 - 32-63 and so on). The last 20
|
|
* producers are for the DSB for each PF.
|
|
* Each PF has five segments: (the order inside each
|
|
* segment is PF0; PF1; PF2; PF3) - 128-131 U prods;
|
|
* 132-135 C prods; 136-139 X prods; 140-143 T prods;
|
|
* 144-147 attn prods;
|
|
*/
|
|
/* non-default-status-blocks */
|
|
num_segs = CHIP_INT_MODE_IS_BC(sc) ?
|
|
IGU_BC_NDSB_NUM_SEGS : IGU_NORM_NDSB_NUM_SEGS;
|
|
for (sb_idx = 0; sb_idx < sc->igu_sb_cnt; sb_idx++) {
|
|
prod_offset = (sc->igu_base_sb + sb_idx) *
|
|
num_segs;
|
|
|
|
for (i = 0; i < num_segs; i++) {
|
|
addr = IGU_REG_PROD_CONS_MEMORY +
|
|
(prod_offset + i) * 4;
|
|
REG_WR(sc, addr, 0);
|
|
}
|
|
/* send consumer update with value 0 */
|
|
bnx2x_ack_sb(sc, sc->igu_base_sb + sb_idx,
|
|
USTORM_ID, 0, IGU_INT_NOP, 1);
|
|
bnx2x_igu_clear_sb(sc, sc->igu_base_sb + sb_idx);
|
|
}
|
|
|
|
/* default-status-blocks */
|
|
num_segs = CHIP_INT_MODE_IS_BC(sc) ?
|
|
IGU_BC_DSB_NUM_SEGS : IGU_NORM_DSB_NUM_SEGS;
|
|
|
|
if (CHIP_IS_MODE_4_PORT(sc))
|
|
dsb_idx = SC_FUNC(sc);
|
|
else
|
|
dsb_idx = SC_VN(sc);
|
|
|
|
prod_offset = (CHIP_INT_MODE_IS_BC(sc) ?
|
|
IGU_BC_BASE_DSB_PROD + dsb_idx :
|
|
IGU_NORM_BASE_DSB_PROD + dsb_idx);
|
|
|
|
/*
|
|
* igu prods come in chunks of E1HVN_MAX (4) -
|
|
* does not matters what is the current chip mode
|
|
*/
|
|
for (i = 0; i < (num_segs * E1HVN_MAX); i += E1HVN_MAX) {
|
|
addr = IGU_REG_PROD_CONS_MEMORY +
|
|
(prod_offset + i) * 4;
|
|
REG_WR(sc, addr, 0);
|
|
}
|
|
/* send consumer update with 0 */
|
|
if (CHIP_INT_MODE_IS_BC(sc)) {
|
|
bnx2x_ack_sb(sc, sc->igu_dsb_id,
|
|
USTORM_ID, 0, IGU_INT_NOP, 1);
|
|
bnx2x_ack_sb(sc, sc->igu_dsb_id,
|
|
CSTORM_ID, 0, IGU_INT_NOP, 1);
|
|
bnx2x_ack_sb(sc, sc->igu_dsb_id,
|
|
XSTORM_ID, 0, IGU_INT_NOP, 1);
|
|
bnx2x_ack_sb(sc, sc->igu_dsb_id,
|
|
TSTORM_ID, 0, IGU_INT_NOP, 1);
|
|
bnx2x_ack_sb(sc, sc->igu_dsb_id,
|
|
ATTENTION_ID, 0, IGU_INT_NOP, 1);
|
|
} else {
|
|
bnx2x_ack_sb(sc, sc->igu_dsb_id,
|
|
USTORM_ID, 0, IGU_INT_NOP, 1);
|
|
bnx2x_ack_sb(sc, sc->igu_dsb_id,
|
|
ATTENTION_ID, 0, IGU_INT_NOP, 1);
|
|
}
|
|
bnx2x_igu_clear_sb(sc, sc->igu_dsb_id);
|
|
|
|
/* !!! these should become driver const once
|
|
rf-tool supports split-68 const */
|
|
REG_WR(sc, IGU_REG_SB_INT_BEFORE_MASK_LSB, 0);
|
|
REG_WR(sc, IGU_REG_SB_INT_BEFORE_MASK_MSB, 0);
|
|
REG_WR(sc, IGU_REG_SB_MASK_LSB, 0);
|
|
REG_WR(sc, IGU_REG_SB_MASK_MSB, 0);
|
|
REG_WR(sc, IGU_REG_PBA_STATUS_LSB, 0);
|
|
REG_WR(sc, IGU_REG_PBA_STATUS_MSB, 0);
|
|
}
|
|
}
|
|
|
|
/* Reset PCIE errors for debug */
|
|
REG_WR(sc, 0x2114, 0xffffffff);
|
|
REG_WR(sc, 0x2120, 0xffffffff);
|
|
|
|
if (CHIP_IS_E1x(sc)) {
|
|
main_mem_size = HC_REG_MAIN_MEMORY_SIZE / 2; /*dwords */
|
|
main_mem_base = HC_REG_MAIN_MEMORY +
|
|
SC_PORT(sc) * (main_mem_size * 4);
|
|
main_mem_prty_clr = HC_REG_HC_PRTY_STS_CLR;
|
|
main_mem_width = 8;
|
|
|
|
val = REG_RD(sc, main_mem_prty_clr);
|
|
if (val) {
|
|
PMD_DRV_LOG(DEBUG, sc,
|
|
"Parity errors in HC block during function init (0x%x)!",
|
|
val);
|
|
}
|
|
|
|
/* Clear "false" parity errors in MSI-X table */
|
|
for (i = main_mem_base;
|
|
i < main_mem_base + main_mem_size * 4;
|
|
i += main_mem_width) {
|
|
bnx2x_read_dmae(sc, i, main_mem_width / 4);
|
|
bnx2x_write_dmae(sc, BNX2X_SP_MAPPING(sc, wb_data),
|
|
i, main_mem_width / 4);
|
|
}
|
|
/* Clear HC parity attention */
|
|
REG_RD(sc, main_mem_prty_clr);
|
|
}
|
|
|
|
/* Enable STORMs SP logging */
|
|
REG_WR8(sc, BAR_USTRORM_INTMEM +
|
|
USTORM_RECORD_SLOW_PATH_OFFSET(SC_FUNC(sc)), 1);
|
|
REG_WR8(sc, BAR_TSTRORM_INTMEM +
|
|
TSTORM_RECORD_SLOW_PATH_OFFSET(SC_FUNC(sc)), 1);
|
|
REG_WR8(sc, BAR_CSTRORM_INTMEM +
|
|
CSTORM_RECORD_SLOW_PATH_OFFSET(SC_FUNC(sc)), 1);
|
|
REG_WR8(sc, BAR_XSTRORM_INTMEM +
|
|
XSTORM_RECORD_SLOW_PATH_OFFSET(SC_FUNC(sc)), 1);
|
|
|
|
elink_phy_probe(&sc->link_params);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bnx2x_link_reset(struct bnx2x_softc *sc)
|
|
{
|
|
if (!BNX2X_NOMCP(sc)) {
|
|
bnx2x_acquire_phy_lock(sc);
|
|
elink_lfa_reset(&sc->link_params, &sc->link_vars);
|
|
bnx2x_release_phy_lock(sc);
|
|
} else {
|
|
if (!CHIP_REV_IS_SLOW(sc)) {
|
|
PMD_DRV_LOG(WARNING, sc,
|
|
"Bootcode is missing - cannot reset link");
|
|
}
|
|
}
|
|
}
|
|
|
|
static void bnx2x_reset_port(struct bnx2x_softc *sc)
|
|
{
|
|
int port = SC_PORT(sc);
|
|
uint32_t val;
|
|
|
|
/* reset physical Link */
|
|
bnx2x_link_reset(sc);
|
|
|
|
REG_WR(sc, NIG_REG_MASK_INTERRUPT_PORT0 + port * 4, 0);
|
|
|
|
/* Do not rcv packets to BRB */
|
|
REG_WR(sc, NIG_REG_LLH0_BRB1_DRV_MASK + port * 4, 0x0);
|
|
/* Do not direct rcv packets that are not for MCP to the BRB */
|
|
REG_WR(sc, (port ? NIG_REG_LLH1_BRB1_NOT_MCP :
|
|
NIG_REG_LLH0_BRB1_NOT_MCP), 0x0);
|
|
|
|
/* Configure AEU */
|
|
REG_WR(sc, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port * 4, 0);
|
|
|
|
DELAY(100000);
|
|
|
|
/* Check for BRB port occupancy */
|
|
val = REG_RD(sc, BRB1_REG_PORT_NUM_OCC_BLOCKS_0 + port * 4);
|
|
if (val) {
|
|
PMD_DRV_LOG(DEBUG, sc,
|
|
"BRB1 is not empty, %d blocks are occupied", val);
|
|
}
|
|
}
|
|
|
|
static void bnx2x_ilt_wr(struct bnx2x_softc *sc, uint32_t index, rte_iova_t addr)
|
|
{
|
|
int reg;
|
|
uint32_t wb_write[2];
|
|
|
|
reg = PXP2_REG_RQ_ONCHIP_AT_B0 + index * 8;
|
|
|
|
wb_write[0] = ONCHIP_ADDR1(addr);
|
|
wb_write[1] = ONCHIP_ADDR2(addr);
|
|
REG_WR_DMAE(sc, reg, wb_write, 2);
|
|
}
|
|
|
|
static void bnx2x_clear_func_ilt(struct bnx2x_softc *sc, uint32_t func)
|
|
{
|
|
uint32_t i, base = FUNC_ILT_BASE(func);
|
|
for (i = base; i < base + ILT_PER_FUNC; i++) {
|
|
bnx2x_ilt_wr(sc, i, 0);
|
|
}
|
|
}
|
|
|
|
static void bnx2x_reset_func(struct bnx2x_softc *sc)
|
|
{
|
|
struct bnx2x_fastpath *fp;
|
|
int port = SC_PORT(sc);
|
|
int func = SC_FUNC(sc);
|
|
int i;
|
|
|
|
/* Disable the function in the FW */
|
|
REG_WR8(sc, BAR_XSTRORM_INTMEM + XSTORM_FUNC_EN_OFFSET(func), 0);
|
|
REG_WR8(sc, BAR_CSTRORM_INTMEM + CSTORM_FUNC_EN_OFFSET(func), 0);
|
|
REG_WR8(sc, BAR_TSTRORM_INTMEM + TSTORM_FUNC_EN_OFFSET(func), 0);
|
|
REG_WR8(sc, BAR_USTRORM_INTMEM + USTORM_FUNC_EN_OFFSET(func), 0);
|
|
|
|
/* FP SBs */
|
|
FOR_EACH_ETH_QUEUE(sc, i) {
|
|
fp = &sc->fp[i];
|
|
REG_WR8(sc, BAR_CSTRORM_INTMEM +
|
|
CSTORM_STATUS_BLOCK_DATA_STATE_OFFSET(fp->fw_sb_id),
|
|
SB_DISABLED);
|
|
}
|
|
|
|
/* SP SB */
|
|
REG_WR8(sc, BAR_CSTRORM_INTMEM +
|
|
CSTORM_SP_STATUS_BLOCK_DATA_STATE_OFFSET(func), SB_DISABLED);
|
|
|
|
for (i = 0; i < XSTORM_SPQ_DATA_SIZE / 4; i++) {
|
|
REG_WR(sc, BAR_XSTRORM_INTMEM + XSTORM_SPQ_DATA_OFFSET(func),
|
|
0);
|
|
}
|
|
|
|
/* Configure IGU */
|
|
if (sc->devinfo.int_block == INT_BLOCK_HC) {
|
|
REG_WR(sc, HC_REG_LEADING_EDGE_0 + port * 8, 0);
|
|
REG_WR(sc, HC_REG_TRAILING_EDGE_0 + port * 8, 0);
|
|
} else {
|
|
REG_WR(sc, IGU_REG_LEADING_EDGE_LATCH, 0);
|
|
REG_WR(sc, IGU_REG_TRAILING_EDGE_LATCH, 0);
|
|
}
|
|
|
|
if (CNIC_LOADED(sc)) {
|
|
/* Disable Timer scan */
|
|
REG_WR(sc, TM_REG_EN_LINEAR0_TIMER + port * 4, 0);
|
|
/*
|
|
* Wait for at least 10ms and up to 2 second for the timers
|
|
* scan to complete
|
|
*/
|
|
for (i = 0; i < 200; i++) {
|
|
DELAY(10000);
|
|
if (!REG_RD(sc, TM_REG_LIN0_SCAN_ON + port * 4))
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Clear ILT */
|
|
bnx2x_clear_func_ilt(sc, func);
|
|
|
|
/*
|
|
* Timers workaround bug for E2: if this is vnic-3,
|
|
* we need to set the entire ilt range for this timers.
|
|
*/
|
|
if (!CHIP_IS_E1x(sc) && SC_VN(sc) == 3) {
|
|
struct ilt_client_info ilt_cli;
|
|
/* use dummy TM client */
|
|
memset(&ilt_cli, 0, sizeof(struct ilt_client_info));
|
|
ilt_cli.start = 0;
|
|
ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1;
|
|
ilt_cli.client_num = ILT_CLIENT_TM;
|
|
|
|
ecore_ilt_boundary_init_op(sc, &ilt_cli, 0, INITOP_CLEAR);
|
|
}
|
|
|
|
/* this assumes that reset_port() called before reset_func() */
|
|
if (!CHIP_IS_E1x(sc)) {
|
|
bnx2x_pf_disable(sc);
|
|
}
|
|
|
|
sc->dmae_ready = 0;
|
|
}
|
|
|
|
static void bnx2x_release_firmware(struct bnx2x_softc *sc)
|
|
{
|
|
rte_free(sc->init_ops);
|
|
rte_free(sc->init_ops_offsets);
|
|
rte_free(sc->init_data);
|
|
rte_free(sc->iro_array);
|
|
}
|
|
|
|
static int bnx2x_init_firmware(struct bnx2x_softc *sc)
|
|
{
|
|
uint32_t len, i;
|
|
uint8_t *p = sc->firmware;
|
|
uint32_t off[24];
|
|
|
|
for (i = 0; i < 24; ++i)
|
|
off[i] = rte_be_to_cpu_32(*((uint32_t *) sc->firmware + i));
|
|
|
|
len = off[0];
|
|
sc->init_ops = rte_zmalloc("", len, RTE_CACHE_LINE_SIZE);
|
|
if (!sc->init_ops)
|
|
goto alloc_failed;
|
|
bnx2x_data_to_init_ops(p + off[1], sc->init_ops, len);
|
|
|
|
len = off[2];
|
|
sc->init_ops_offsets = rte_zmalloc("", len, RTE_CACHE_LINE_SIZE);
|
|
if (!sc->init_ops_offsets)
|
|
goto alloc_failed;
|
|
bnx2x_data_to_init_offsets(p + off[3], sc->init_ops_offsets, len);
|
|
|
|
len = off[4];
|
|
sc->init_data = rte_zmalloc("", len, RTE_CACHE_LINE_SIZE);
|
|
if (!sc->init_data)
|
|
goto alloc_failed;
|
|
bnx2x_data_to_init_data(p + off[5], sc->init_data, len);
|
|
|
|
sc->tsem_int_table_data = p + off[7];
|
|
sc->tsem_pram_data = p + off[9];
|
|
sc->usem_int_table_data = p + off[11];
|
|
sc->usem_pram_data = p + off[13];
|
|
sc->csem_int_table_data = p + off[15];
|
|
sc->csem_pram_data = p + off[17];
|
|
sc->xsem_int_table_data = p + off[19];
|
|
sc->xsem_pram_data = p + off[21];
|
|
|
|
len = off[22];
|
|
sc->iro_array = rte_zmalloc("", len, RTE_CACHE_LINE_SIZE);
|
|
if (!sc->iro_array)
|
|
goto alloc_failed;
|
|
bnx2x_data_to_iro_array(p + off[23], sc->iro_array, len);
|
|
|
|
return 0;
|
|
|
|
alloc_failed:
|
|
bnx2x_release_firmware(sc);
|
|
return -1;
|
|
}
|
|
|
|
static int cut_gzip_prefix(const uint8_t * zbuf, int len)
|
|
{
|
|
#define MIN_PREFIX_SIZE (10)
|
|
|
|
int n = MIN_PREFIX_SIZE;
|
|
uint16_t xlen;
|
|
|
|
if (!(zbuf[0] == 0x1f && zbuf[1] == 0x8b && zbuf[2] == Z_DEFLATED) ||
|
|
len <= MIN_PREFIX_SIZE) {
|
|
return -1;
|
|
}
|
|
|
|
/* optional extra fields are present */
|
|
if (zbuf[3] & 0x4) {
|
|
xlen = zbuf[13];
|
|
xlen <<= 8;
|
|
xlen += zbuf[12];
|
|
|
|
n += xlen;
|
|
}
|
|
/* file name is present */
|
|
if (zbuf[3] & 0x8) {
|
|
while ((zbuf[n++] != 0) && (n < len)) ;
|
|
}
|
|
|
|
return n;
|
|
}
|
|
|
|
static int ecore_gunzip(struct bnx2x_softc *sc, const uint8_t * zbuf, int len)
|
|
{
|
|
int ret;
|
|
int data_begin = cut_gzip_prefix(zbuf, len);
|
|
|
|
PMD_DRV_LOG(DEBUG, sc, "ecore_gunzip %d", len);
|
|
|
|
if (data_begin <= 0) {
|
|
PMD_DRV_LOG(NOTICE, sc, "bad gzip prefix");
|
|
return -1;
|
|
}
|
|
|
|
memset(&zlib_stream, 0, sizeof(zlib_stream));
|
|
zlib_stream.next_in = zbuf + data_begin;
|
|
zlib_stream.avail_in = len - data_begin;
|
|
zlib_stream.next_out = sc->gz_buf;
|
|
zlib_stream.avail_out = FW_BUF_SIZE;
|
|
|
|
ret = inflateInit2(&zlib_stream, -MAX_WBITS);
|
|
if (ret != Z_OK) {
|
|
PMD_DRV_LOG(NOTICE, sc, "zlib inflateInit2 error");
|
|
return ret;
|
|
}
|
|
|
|
ret = inflate(&zlib_stream, Z_FINISH);
|
|
if ((ret != Z_STREAM_END) && (ret != Z_OK)) {
|
|
PMD_DRV_LOG(NOTICE, sc, "zlib inflate error: %d %s", ret,
|
|
zlib_stream.msg);
|
|
}
|
|
|
|
sc->gz_outlen = zlib_stream.total_out;
|
|
if (sc->gz_outlen & 0x3) {
|
|
PMD_DRV_LOG(NOTICE, sc, "firmware is not aligned. gz_outlen == %d",
|
|
sc->gz_outlen);
|
|
}
|
|
sc->gz_outlen >>= 2;
|
|
|
|
inflateEnd(&zlib_stream);
|
|
|
|
if (ret == Z_STREAM_END)
|
|
return 0;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void
|
|
ecore_write_dmae_phys_len(struct bnx2x_softc *sc, rte_iova_t phys_addr,
|
|
uint32_t addr, uint32_t len)
|
|
{
|
|
bnx2x_write_dmae_phys_len(sc, phys_addr, addr, len);
|
|
}
|
|
|
|
void
|
|
ecore_storm_memset_struct(struct bnx2x_softc *sc, uint32_t addr, size_t size,
|
|
uint32_t * data)
|
|
{
|
|
uint8_t i;
|
|
for (i = 0; i < size / 4; i++) {
|
|
REG_WR(sc, addr + (i * 4), data[i]);
|
|
}
|
|
}
|
|
|
|
static const char *get_ext_phy_type(uint32_t ext_phy_type)
|
|
{
|
|
uint32_t phy_type_idx = ext_phy_type >> 8;
|
|
static const char *types[] =
|
|
{ "DIRECT", "BNX2X-8071", "BNX2X-8072", "BNX2X-8073",
|
|
"BNX2X-8705", "BNX2X-8706", "BNX2X-8726", "BNX2X-8481", "SFX-7101",
|
|
"BNX2X-8727",
|
|
"BNX2X-8727-NOC", "BNX2X-84823", "NOT_CONN", "FAILURE"
|
|
};
|
|
|
|
if (phy_type_idx < 12)
|
|
return types[phy_type_idx];
|
|
else if (PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN == ext_phy_type)
|
|
return types[12];
|
|
else
|
|
return types[13];
|
|
}
|
|
|
|
static const char *get_state(uint32_t state)
|
|
{
|
|
uint32_t state_idx = state >> 12;
|
|
static const char *states[] = { "CLOSED", "OPENING_WAIT4_LOAD",
|
|
"OPENING_WAIT4_PORT", "OPEN", "CLOSING_WAIT4_HALT",
|
|
"CLOSING_WAIT4_DELETE", "CLOSING_WAIT4_UNLOAD",
|
|
"UNKNOWN", "UNKNOWN", "UNKNOWN", "UNKNOWN", "UNKNOWN",
|
|
"UNKNOWN", "DISABLED", "DIAG", "ERROR", "UNDEFINED"
|
|
};
|
|
|
|
if (state_idx <= 0xF)
|
|
return states[state_idx];
|
|
else
|
|
return states[0x10];
|
|
}
|
|
|
|
static const char *get_recovery_state(uint32_t state)
|
|
{
|
|
static const char *states[] = { "NONE", "DONE", "INIT",
|
|
"WAIT", "FAILED", "NIC_LOADING"
|
|
};
|
|
return states[state];
|
|
}
|
|
|
|
static const char *get_rx_mode(uint32_t mode)
|
|
{
|
|
static const char *modes[] = { "NONE", "NORMAL", "ALLMULTI",
|
|
"PROMISC", "MAX_MULTICAST", "ERROR"
|
|
};
|
|
|
|
if (mode < 0x4)
|
|
return modes[mode];
|
|
else if (BNX2X_MAX_MULTICAST == mode)
|
|
return modes[4];
|
|
else
|
|
return modes[5];
|
|
}
|
|
|
|
#define BNX2X_INFO_STR_MAX 256
|
|
static const char *get_bnx2x_flags(uint32_t flags)
|
|
{
|
|
int i;
|
|
static const char *flag[] = { "ONE_PORT ", "NO_ISCSI ",
|
|
"NO_FCOE ", "NO_WOL ", "USING_DAC ", "USING_MSIX ",
|
|
"USING_MSI ", "DISABLE_MSI ", "UNKNOWN ", "NO_MCP ",
|
|
"SAFC_TX_FLAG ", "MF_FUNC_DIS ", "TX_SWITCHING "
|
|
};
|
|
static char flag_str[BNX2X_INFO_STR_MAX];
|
|
memset(flag_str, 0, BNX2X_INFO_STR_MAX);
|
|
|
|
for (i = 0; i < 5; i++)
|
|
if (flags & (1 << i)) {
|
|
strlcat(flag_str, flag[i], sizeof(flag_str));
|
|
flags ^= (1 << i);
|
|
}
|
|
if (flags) {
|
|
static char unknown[BNX2X_INFO_STR_MAX];
|
|
snprintf(unknown, 32, "Unknown flag mask %x", flags);
|
|
strlcat(flag_str, unknown, sizeof(flag_str));
|
|
}
|
|
return flag_str;
|
|
}
|
|
|
|
/* Prints useful adapter info. */
|
|
void bnx2x_print_adapter_info(struct bnx2x_softc *sc)
|
|
{
|
|
int i = 0;
|
|
|
|
PMD_DRV_LOG(INFO, sc, "========================================");
|
|
/* DPDK and Driver versions */
|
|
PMD_DRV_LOG(INFO, sc, "%12s : %s", "DPDK",
|
|
rte_version());
|
|
PMD_DRV_LOG(INFO, sc, "%12s : %s", "Driver",
|
|
bnx2x_pmd_version());
|
|
/* Firmware versions. */
|
|
PMD_DRV_LOG(INFO, sc, "%12s : %d.%d.%d",
|
|
"Firmware",
|
|
BNX2X_5710_FW_MAJOR_VERSION,
|
|
BNX2X_5710_FW_MINOR_VERSION,
|
|
BNX2X_5710_FW_REVISION_VERSION);
|
|
PMD_DRV_LOG(INFO, sc, "%12s : %s",
|
|
"Bootcode", sc->devinfo.bc_ver_str);
|
|
/* Hardware chip info. */
|
|
PMD_DRV_LOG(INFO, sc, "%12s : %#08x", "ASIC", sc->devinfo.chip_id);
|
|
PMD_DRV_LOG(INFO, sc, "%12s : %c%d", "Rev", (CHIP_REV(sc) >> 12) + 'A',
|
|
(CHIP_METAL(sc) >> 4));
|
|
/* Bus PCIe info. */
|
|
PMD_DRV_LOG(INFO, sc, "%12s : 0x%x", "Vendor Id",
|
|
sc->devinfo.vendor_id);
|
|
PMD_DRV_LOG(INFO, sc, "%12s : 0x%x", "Device Id",
|
|
sc->devinfo.device_id);
|
|
PMD_DRV_LOG(INFO, sc, "%12s : width x%d, ", "Bus PCIe",
|
|
sc->devinfo.pcie_link_width);
|
|
switch (sc->devinfo.pcie_link_speed) {
|
|
case 1:
|
|
PMD_DRV_LOG(INFO, sc, "%23s", "2.5 Gbps");
|
|
break;
|
|
case 2:
|
|
PMD_DRV_LOG(INFO, sc, "%21s", "5 Gbps");
|
|
break;
|
|
case 4:
|
|
PMD_DRV_LOG(INFO, sc, "%21s", "8 Gbps");
|
|
break;
|
|
default:
|
|
PMD_DRV_LOG(INFO, sc, "%33s", "Unknown link speed");
|
|
}
|
|
/* Device features. */
|
|
PMD_DRV_LOG(INFO, sc, "%12s : ", "Flags");
|
|
/* Miscellaneous flags. */
|
|
if (sc->devinfo.pcie_cap_flags & BNX2X_MSI_CAPABLE_FLAG) {
|
|
PMD_DRV_LOG(INFO, sc, "%18s", "MSI");
|
|
i++;
|
|
}
|
|
if (sc->devinfo.pcie_cap_flags & BNX2X_MSIX_CAPABLE_FLAG) {
|
|
if (i > 0)
|
|
PMD_DRV_LOG(INFO, sc, "|");
|
|
PMD_DRV_LOG(INFO, sc, "%20s", "MSI-X");
|
|
i++;
|
|
}
|
|
PMD_DRV_LOG(INFO, sc, "%12s : %s", "OVLAN", (OVLAN(sc) ? "YES" : "NO"));
|
|
PMD_DRV_LOG(INFO, sc, "%12s : %s", "MF", (IS_MF(sc) ? "YES" : "NO"));
|
|
PMD_DRV_LOG(INFO, sc, "========================================");
|
|
}
|
|
|
|
/* Prints useful device info. */
|
|
void bnx2x_print_device_info(struct bnx2x_softc *sc)
|
|
{
|
|
__rte_unused uint32_t ext_phy_type;
|
|
uint32_t offset, reg_val;
|
|
|
|
PMD_INIT_FUNC_TRACE(sc);
|
|
offset = offsetof(struct shmem_region,
|
|
dev_info.port_hw_config[0].external_phy_config);
|
|
reg_val = REG_RD(sc, sc->devinfo.shmem_base + offset);
|
|
if (sc->link_vars.phy_flags & PHY_XGXS_FLAG)
|
|
ext_phy_type = ELINK_XGXS_EXT_PHY_TYPE(reg_val);
|
|
else
|
|
ext_phy_type = ELINK_SERDES_EXT_PHY_TYPE(reg_val);
|
|
|
|
/* Device features. */
|
|
PMD_DRV_LOG(INFO, sc, "%12s : %u", "Bnx2x Func", sc->pcie_func);
|
|
PMD_DRV_LOG(INFO, sc,
|
|
"%12s : %s", "Bnx2x Flags", get_bnx2x_flags(sc->flags));
|
|
PMD_DRV_LOG(INFO, sc, "%12s : %s", "DMAE Is",
|
|
(sc->dmae_ready ? "Ready" : "Not Ready"));
|
|
PMD_DRV_LOG(INFO, sc, "%12s : %u", "MTU", sc->mtu);
|
|
PMD_DRV_LOG(INFO, sc,
|
|
"%12s : %s", "PHY Type", get_ext_phy_type(ext_phy_type));
|
|
PMD_DRV_LOG(INFO, sc, "%12s : %x:%x:%x:%x:%x:%x", "MAC Addr",
|
|
sc->link_params.mac_addr[0],
|
|
sc->link_params.mac_addr[1],
|
|
sc->link_params.mac_addr[2],
|
|
sc->link_params.mac_addr[3],
|
|
sc->link_params.mac_addr[4],
|
|
sc->link_params.mac_addr[5]);
|
|
PMD_DRV_LOG(INFO, sc, "%12s : %s", "RX Mode", get_rx_mode(sc->rx_mode));
|
|
PMD_DRV_LOG(INFO, sc, "%12s : %s", "State", get_state(sc->state));
|
|
if (sc->recovery_state)
|
|
PMD_DRV_LOG(INFO, sc, "%12s : %s", "Recovery",
|
|
get_recovery_state(sc->recovery_state));
|
|
/* Queue info. */
|
|
if (IS_PF(sc)) {
|
|
switch (sc->sp->rss_rdata.rss_mode) {
|
|
case ETH_RSS_MODE_DISABLED:
|
|
PMD_DRV_LOG(INFO, sc, "%12s : %s", "Queues", "RSS mode - None");
|
|
break;
|
|
case ETH_RSS_MODE_REGULAR:
|
|
PMD_DRV_LOG(INFO, sc, "%12s : %s,", "Queues", "RSS mode - Regular");
|
|
PMD_DRV_LOG(INFO, sc, "%16d", sc->num_queues);
|
|
break;
|
|
default:
|
|
PMD_DRV_LOG(INFO, sc, "%12s : %s", "Queues", "RSS mode - Unknown");
|
|
break;
|
|
}
|
|
}
|
|
PMD_DRV_LOG(INFO, sc, "%12s : CQ = %lx, EQ = %lx", "SPQ Left",
|
|
sc->cq_spq_left, sc->eq_spq_left);
|
|
|
|
PMD_DRV_LOG(INFO, sc,
|
|
"%12s : %x", "Switch", sc->link_params.switch_cfg);
|
|
PMD_DRV_LOG(INFO, sc, "pcie_bus=%d, pcie_device=%d",
|
|
sc->pcie_bus, sc->pcie_device);
|
|
PMD_DRV_LOG(INFO, sc, "bar0.addr=%p, bar1.addr=%p",
|
|
sc->bar[BAR0].base_addr, sc->bar[BAR1].base_addr);
|
|
PMD_DRV_LOG(INFO, sc, "port=%d, path=%d, vnic=%d, func=%d",
|
|
PORT_ID(sc), PATH_ID(sc), VNIC_ID(sc), FUNC_ID(sc));
|
|
}
|