d/numam-dpdk
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
5cf5f710b0
numam-dpdk/drivers/net/mlx5/mlx5_ethdev.c
Viacheslav Ovsiienko 5cf5f710b0 net/mlx5: update PCI address retrieving routine 
The routine mlx5_ibv_device_to_pci_addr() takes Infiniband
device list object, takes the device sysfs path from there
and retrieves PCI address. The routine may be implemented
in more generic way by taking sysfs path directly as parameter
and can be used for getting PCI address of netdevs.

The generic routine is renamed to mlx5_dev_to_pci_addr()

Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
2019-10-07 15:00:58 +02:00

2019 lines
52 KiB
C
Raw Blame History

/* SPDX-License-Identifier: BSD-3-Clause
* Copyright 2015 6WIND S.A.
* Copyright 2015 Mellanox Technologies, Ltd
*/
#include <stddef.h>
#include <assert.h>
#include <inttypes.h>
#include <unistd.h>
#include <stdbool.h>
#include <stdint.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <errno.h>
#include <dirent.h>
#include <net/if.h>
#include <sys/ioctl.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <linux/ethtool.h>
#include <linux/sockios.h>
#include <fcntl.h>
#include <stdalign.h>
#include <sys/un.h>
#include <time.h>
#include <rte_atomic.h>
#include <rte_ethdev_driver.h>
#include <rte_bus_pci.h>
#include <rte_mbuf.h>
#include <rte_common.h>
#include <rte_interrupts.h>
#include <rte_malloc.h>
#include <rte_string_fns.h>
#include <rte_rwlock.h>
#include <rte_cycles.h>
#include "mlx5.h"
#include "mlx5_glue.h"
#include "mlx5_rxtx.h"
#include "mlx5_utils.h"
/* Supported speed values found in /usr/include/linux/ethtool.h */
#ifndef HAVE_SUPPORTED_40000baseKR4_Full
#define SUPPORTED_40000baseKR4_Full (1 << 23)
#endif
#ifndef HAVE_SUPPORTED_40000baseCR4_Full
#define SUPPORTED_40000baseCR4_Full (1 << 24)
#endif
#ifndef HAVE_SUPPORTED_40000baseSR4_Full
#define SUPPORTED_40000baseSR4_Full (1 << 25)
#endif
#ifndef HAVE_SUPPORTED_40000baseLR4_Full
#define SUPPORTED_40000baseLR4_Full (1 << 26)
#endif
#ifndef HAVE_SUPPORTED_56000baseKR4_Full
#define SUPPORTED_56000baseKR4_Full (1 << 27)
#endif
#ifndef HAVE_SUPPORTED_56000baseCR4_Full
#define SUPPORTED_56000baseCR4_Full (1 << 28)
#endif
#ifndef HAVE_SUPPORTED_56000baseSR4_Full
#define SUPPORTED_56000baseSR4_Full (1 << 29)
#endif
#ifndef HAVE_SUPPORTED_56000baseLR4_Full
#define SUPPORTED_56000baseLR4_Full (1 << 30)
#endif
/* Add defines in case the running kernel is not the same as user headers. */
#ifndef ETHTOOL_GLINKSETTINGS
struct ethtool_link_settings {
uint32_t cmd;
uint32_t speed;
uint8_t duplex;
uint8_t port;
uint8_t phy_address;
uint8_t autoneg;
uint8_t mdio_support;
uint8_t eth_to_mdix;
uint8_t eth_tp_mdix_ctrl;
int8_t link_mode_masks_nwords;
uint32_t reserved[8];
uint32_t link_mode_masks[];
};
#define ETHTOOL_GLINKSETTINGS 0x0000004c
#define ETHTOOL_LINK_MODE_1000baseT_Full_BIT 5
#define ETHTOOL_LINK_MODE_Autoneg_BIT 6
#define ETHTOOL_LINK_MODE_1000baseKX_Full_BIT 17
#define ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT 18
#define ETHTOOL_LINK_MODE_10000baseKR_Full_BIT 19
#define ETHTOOL_LINK_MODE_10000baseR_FEC_BIT 20
#define ETHTOOL_LINK_MODE_20000baseMLD2_Full_BIT 21
#define ETHTOOL_LINK_MODE_20000baseKR2_Full_BIT 22
#define ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT 23
#define ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT 24
#define ETHTOOL_LINK_MODE_40000baseSR4_Full_BIT 25
#define ETHTOOL_LINK_MODE_40000baseLR4_Full_BIT 26
#define ETHTOOL_LINK_MODE_56000baseKR4_Full_BIT 27
#define ETHTOOL_LINK_MODE_56000baseCR4_Full_BIT 28
#define ETHTOOL_LINK_MODE_56000baseSR4_Full_BIT 29
#define ETHTOOL_LINK_MODE_56000baseLR4_Full_BIT 30
#endif
#ifndef HAVE_ETHTOOL_LINK_MODE_25G
#define ETHTOOL_LINK_MODE_25000baseCR_Full_BIT 31
#define ETHTOOL_LINK_MODE_25000baseKR_Full_BIT 32
#define ETHTOOL_LINK_MODE_25000baseSR_Full_BIT 33
#endif
#ifndef HAVE_ETHTOOL_LINK_MODE_50G
#define ETHTOOL_LINK_MODE_50000baseCR2_Full_BIT 34
#define ETHTOOL_LINK_MODE_50000baseKR2_Full_BIT 35
#endif
#ifndef HAVE_ETHTOOL_LINK_MODE_100G
#define ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT 36
#define ETHTOOL_LINK_MODE_100000baseSR4_Full_BIT 37
#define ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT 38
#define ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT 39
#endif
/**
* Get master interface name from private structure.
*
* @param[in] dev
* Pointer to Ethernet device.
* @param[out] ifname
* Interface name output buffer.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_get_master_ifname(const char *ibdev_path, char (*ifname)[IF_NAMESIZE])
{
DIR *dir;
struct dirent *dent;
unsigned int dev_type = 0;
unsigned int dev_port_prev = ~0u;
char match[IF_NAMESIZE] = "";
assert(ibdev_path);
{
MKSTR(path, "%s/device/net", ibdev_path);
dir = opendir(path);
if (dir == NULL) {
rte_errno = errno;
return -rte_errno;
}
}
while ((dent = readdir(dir)) != NULL) {
char *name = dent->d_name;
FILE *file;
unsigned int dev_port;
int r;
if ((name[0] == '.') &&
((name[1] == '\0') ||
((name[1] == '.') && (name[2] == '\0'))))
continue;
MKSTR(path, "%s/device/net/%s/%s",
ibdev_path, name,
(dev_type ? "dev_id" : "dev_port"));
file = fopen(path, "rb");
if (file == NULL) {
if (errno != ENOENT)
continue;
/*
* Switch to dev_id when dev_port does not exist as
* is the case with Linux kernel versions < 3.15.
*/
try_dev_id:
match[0] = '\0';
if (dev_type)
break;
dev_type = 1;
dev_port_prev = ~0u;
rewinddir(dir);
continue;
}
r = fscanf(file, (dev_type ? "%x" : "%u"), &dev_port);
fclose(file);
if (r != 1)
continue;
/*
* Switch to dev_id when dev_port returns the same value for
* all ports. May happen when using a MOFED release older than
* 3.0 with a Linux kernel >= 3.15.
*/
if (dev_port == dev_port_prev)
goto try_dev_id;
dev_port_prev = dev_port;
if (dev_port == 0)
strlcpy(match, name, sizeof(match));
}
closedir(dir);
if (match[0] == '\0') {
rte_errno = ENOENT;
return -rte_errno;
}
strncpy(*ifname, match, sizeof(*ifname));
return 0;
}
/**
* Get interface name from private structure.
*
* This is a port representor-aware version of mlx5_get_master_ifname().
*
* @param[in] dev
* Pointer to Ethernet device.
* @param[out] ifname
* Interface name output buffer.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_get_ifname(const struct rte_eth_dev *dev, char (*ifname)[IF_NAMESIZE])
{
struct mlx5_priv *priv = dev->data->dev_private;
unsigned int ifindex;
assert(priv);
assert(priv->sh);
ifindex = mlx5_ifindex(dev);
if (!ifindex) {
if (!priv->representor)
return mlx5_get_master_ifname(priv->sh->ibdev_path,
ifname);
rte_errno = ENXIO;
return -rte_errno;
}
if (if_indextoname(ifindex, &(*ifname)[0]))
return 0;
rte_errno = errno;
return -rte_errno;
}
/**
* Get the interface index from device name.
*
* @param[in] dev
* Pointer to Ethernet device.
*
* @return
* Nonzero interface index on success, zero otherwise and rte_errno is set.
*/
unsigned int
mlx5_ifindex(const struct rte_eth_dev *dev)
{
struct mlx5_priv *priv = dev->data->dev_private;
unsigned int ifindex;
assert(priv);
assert(priv->if_index);
ifindex = priv->if_index;
if (!ifindex)
rte_errno = ENXIO;
return ifindex;
}
/**
* Perform ifreq ioctl() on associated Ethernet device.
*
* @param[in] dev
* Pointer to Ethernet device.
* @param req
* Request number to pass to ioctl().
* @param[out] ifr
* Interface request structure output buffer.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_ifreq(const struct rte_eth_dev *dev, int req, struct ifreq *ifr)
{
int sock = socket(PF_INET, SOCK_DGRAM, IPPROTO_IP);
int ret = 0;
if (sock == -1) {
rte_errno = errno;
return -rte_errno;
}
ret = mlx5_get_ifname(dev, &ifr->ifr_name);
if (ret)
goto error;
ret = ioctl(sock, req, ifr);
if (ret == -1) {
rte_errno = errno;
goto error;
}
close(sock);
return 0;
error:
close(sock);
return -rte_errno;
}
/**
* Get device MTU.
*
* @param dev
* Pointer to Ethernet device.
* @param[out] mtu
* MTU value output buffer.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_get_mtu(struct rte_eth_dev *dev, uint16_t *mtu)
{
struct ifreq request;
int ret = mlx5_ifreq(dev, SIOCGIFMTU, &request);
if (ret)
return ret;
*mtu = request.ifr_mtu;
return 0;
}
/**
* Set device MTU.
*
* @param dev
* Pointer to Ethernet device.
* @param mtu
* MTU value to set.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
mlx5_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
{
struct ifreq request = { .ifr_mtu = mtu, };
return mlx5_ifreq(dev, SIOCSIFMTU, &request);
}
/**
* Set device flags.
*
* @param dev
* Pointer to Ethernet device.
* @param keep
* Bitmask for flags that must remain untouched.
* @param flags
* Bitmask for flags to modify.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_set_flags(struct rte_eth_dev *dev, unsigned int keep, unsigned int flags)
{
struct ifreq request;
int ret = mlx5_ifreq(dev, SIOCGIFFLAGS, &request);
if (ret)
return ret;
request.ifr_flags &= keep;
request.ifr_flags |= flags & ~keep;
return mlx5_ifreq(dev, SIOCSIFFLAGS, &request);
}
/**
* DPDK callback for Ethernet device configuration.
*
* @param dev
* Pointer to Ethernet device structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_dev_configure(struct rte_eth_dev *dev)
{
struct mlx5_priv *priv = dev->data->dev_private;
unsigned int rxqs_n = dev->data->nb_rx_queues;
unsigned int txqs_n = dev->data->nb_tx_queues;
unsigned int i;
unsigned int j;
unsigned int reta_idx_n;
const uint8_t use_app_rss_key =
!!dev->data->dev_conf.rx_adv_conf.rss_conf.rss_key;
int ret = 0;
if (use_app_rss_key &&
(dev->data->dev_conf.rx_adv_conf.rss_conf.rss_key_len !=
MLX5_RSS_HASH_KEY_LEN)) {
DRV_LOG(ERR, "port %u RSS key len must be %s Bytes long",
dev->data->port_id, RTE_STR(MLX5_RSS_HASH_KEY_LEN));
rte_errno = EINVAL;
return -rte_errno;
}
priv->rss_conf.rss_key =
rte_realloc(priv->rss_conf.rss_key,
MLX5_RSS_HASH_KEY_LEN, 0);
if (!priv->rss_conf.rss_key) {
DRV_LOG(ERR, "port %u cannot allocate RSS hash key memory (%u)",
dev->data->port_id, rxqs_n);
rte_errno = ENOMEM;
return -rte_errno;
}
memcpy(priv->rss_conf.rss_key,
use_app_rss_key ?
dev->data->dev_conf.rx_adv_conf.rss_conf.rss_key :
rss_hash_default_key,
MLX5_RSS_HASH_KEY_LEN);
priv->rss_conf.rss_key_len = MLX5_RSS_HASH_KEY_LEN;
priv->rss_conf.rss_hf = dev->data->dev_conf.rx_adv_conf.rss_conf.rss_hf;
priv->rxqs = (void *)dev->data->rx_queues;
priv->txqs = (void *)dev->data->tx_queues;
if (txqs_n != priv->txqs_n) {
DRV_LOG(INFO, "port %u Tx queues number update: %u -> %u",
dev->data->port_id, priv->txqs_n, txqs_n);
priv->txqs_n = txqs_n;
}
if (rxqs_n > priv->config.ind_table_max_size) {
DRV_LOG(ERR, "port %u cannot handle this many Rx queues (%u)",
dev->data->port_id, rxqs_n);
rte_errno = EINVAL;
return -rte_errno;
}
if (rxqs_n != priv->rxqs_n) {
DRV_LOG(INFO, "port %u Rx queues number update: %u -> %u",
dev->data->port_id, priv->rxqs_n, rxqs_n);
priv->rxqs_n = rxqs_n;
/*
* If the requested number of RX queues is not a power of two,
* use the maximum indirection table size for better balancing.
* The result is always rounded to the next power of two.
*/
reta_idx_n = (1 << log2above((rxqs_n & (rxqs_n - 1)) ?
priv->config.ind_table_max_size :
rxqs_n));
ret = mlx5_rss_reta_index_resize(dev, reta_idx_n);
if (ret)
return ret;
/*
* When the number of RX queues is not a power of two,
* the remaining table entries are padded with reused WQs
* and hashes are not spread uniformly.
*/
for (i = 0, j = 0; (i != reta_idx_n); ++i) {
(*priv->reta_idx)[i] = j;
if (++j == rxqs_n)
j = 0;
}
}
ret = mlx5_proc_priv_init(dev);
if (ret)
return ret;
return 0;
}
/**
* Sets default tuning parameters.
*
* @param dev
* Pointer to Ethernet device.
* @param[out] info
* Info structure output buffer.
*/
static void
mlx5_set_default_params(struct rte_eth_dev *dev, struct rte_eth_dev_info *info)
{
struct mlx5_priv *priv = dev->data->dev_private;
/* Minimum CPU utilization. */
info->default_rxportconf.ring_size = 256;
info->default_txportconf.ring_size = 256;
info->default_rxportconf.burst_size = 64;
info->default_txportconf.burst_size = 64;
if (priv->link_speed_capa & ETH_LINK_SPEED_100G) {
info->default_rxportconf.nb_queues = 16;
info->default_txportconf.nb_queues = 16;
if (dev->data->nb_rx_queues > 2 ||
dev->data->nb_tx_queues > 2) {
/* Max Throughput. */
info->default_rxportconf.ring_size = 2048;
info->default_txportconf.ring_size = 2048;
}
} else {
info->default_rxportconf.nb_queues = 8;
info->default_txportconf.nb_queues = 8;
if (dev->data->nb_rx_queues > 2 ||
dev->data->nb_tx_queues > 2) {
/* Max Throughput. */
info->default_rxportconf.ring_size = 4096;
info->default_txportconf.ring_size = 4096;
}
}
}
/**
* Sets tx mbuf limiting parameters.
*
* @param dev
* Pointer to Ethernet device.
* @param[out] info
* Info structure output buffer.
*/
static void
mlx5_set_txlimit_params(struct rte_eth_dev *dev, struct rte_eth_dev_info *info)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_dev_config *config = &priv->config;
unsigned int inlen;
uint16_t nb_max;
inlen = (config->txq_inline_max == MLX5_ARG_UNSET) ?
MLX5_SEND_DEF_INLINE_LEN :
(unsigned int)config->txq_inline_max;
assert(config->txq_inline_min >= 0);
inlen = RTE_MAX(inlen, (unsigned int)config->txq_inline_min);
inlen = RTE_MIN(inlen, MLX5_WQE_SIZE_MAX +
MLX5_ESEG_MIN_INLINE_SIZE -
MLX5_WQE_CSEG_SIZE -
MLX5_WQE_ESEG_SIZE -
MLX5_WQE_DSEG_SIZE * 2);
nb_max = (MLX5_WQE_SIZE_MAX +
MLX5_ESEG_MIN_INLINE_SIZE -
MLX5_WQE_CSEG_SIZE -
MLX5_WQE_ESEG_SIZE -
MLX5_WQE_DSEG_SIZE -
inlen) / MLX5_WSEG_SIZE;
info->tx_desc_lim.nb_seg_max = nb_max;
info->tx_desc_lim.nb_mtu_seg_max = nb_max;
}
/**
* DPDK callback to get information about the device.
*
* @param dev
* Pointer to Ethernet device structure.
* @param[out] info
* Info structure output buffer.
*/
int
mlx5_dev_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *info)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_dev_config *config = &priv->config;
unsigned int max;
/* FIXME: we should ask the device for these values. */
info->min_rx_bufsize = 32;
info->max_rx_pktlen = 65536;
/*
* Since we need one CQ per QP, the limit is the minimum number
* between the two values.
*/
max = RTE_MIN(priv->sh->device_attr.orig_attr.max_cq,
priv->sh->device_attr.orig_attr.max_qp);
/* If max >= 65535 then max = 0, max_rx_queues is uint16_t. */
if (max >= 65535)
max = 65535;
info->max_rx_queues = max;
info->max_tx_queues = max;
info->max_mac_addrs = MLX5_MAX_UC_MAC_ADDRESSES;
info->rx_queue_offload_capa = mlx5_get_rx_queue_offloads(dev);
info->rx_offload_capa = (mlx5_get_rx_port_offloads() |
info->rx_queue_offload_capa);
info->tx_offload_capa = mlx5_get_tx_port_offloads(dev);
info->if_index = mlx5_ifindex(dev);
info->reta_size = priv->reta_idx_n ?
priv->reta_idx_n : config->ind_table_max_size;
info->hash_key_size = MLX5_RSS_HASH_KEY_LEN;
info->speed_capa = priv->link_speed_capa;
info->flow_type_rss_offloads = ~MLX5_RSS_HF_MASK;
mlx5_set_default_params(dev, info);
mlx5_set_txlimit_params(dev, info);
info->switch_info.name = dev->data->name;
info->switch_info.domain_id = priv->domain_id;
info->switch_info.port_id = priv->representor_id;
if (priv->representor) {
unsigned int i = mlx5_dev_to_port_id(dev->device, NULL, 0);
uint16_t port_id[i];
i = RTE_MIN(mlx5_dev_to_port_id(dev->device, port_id, i), i);
while (i--) {
struct mlx5_priv *opriv =
rte_eth_devices[port_id[i]].data->dev_private;
if (!opriv ||
opriv->representor ||
opriv->domain_id != priv->domain_id)
continue;
/*
* Override switch name with that of the master
* device.
*/
info->switch_info.name = opriv->dev_data->name;
break;
}
}
return 0;
}
/**
* Get device current raw clock counter
*
* @param dev
* Pointer to Ethernet device structure.
* @param[out] time
* Current raw clock counter of the device.
*
* @return
* 0 if the clock has correctly been read
* The value of errno in case of error
*/
int
mlx5_read_clock(struct rte_eth_dev *dev, uint64_t *clock)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct ibv_context *ctx = priv->sh->ctx;
struct ibv_values_ex values;
int err = 0;
values.comp_mask = IBV_VALUES_MASK_RAW_CLOCK;
err = mlx5_glue->query_rt_values_ex(ctx, &values);
if (err != 0) {
DRV_LOG(WARNING, "Could not query the clock !");
return err;
}
*clock = values.raw_clock.tv_nsec;
return 0;
}
/**
* Get firmware version of a device.
*
* @param dev
* Ethernet device port.
* @param fw_ver
* String output allocated by caller.
* @param fw_size
* Size of the output string, including terminating null byte.
*
* @return
* 0 on success, or the size of the non truncated string if too big.
*/
int mlx5_fw_version_get(struct rte_eth_dev *dev, char *fw_ver, size_t fw_size)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct ibv_device_attr *attr = &priv->sh->device_attr.orig_attr;
size_t size = strnlen(attr->fw_ver, sizeof(attr->fw_ver)) + 1;
if (fw_size < size)
return size;
if (fw_ver != NULL)
strlcpy(fw_ver, attr->fw_ver, fw_size);
return 0;
}
/**
* Get supported packet types.
*
* @param dev
* Pointer to Ethernet device structure.
*
* @return
* A pointer to the supported Packet types array.
*/
const uint32_t *
mlx5_dev_supported_ptypes_get(struct rte_eth_dev *dev)
{
static const uint32_t ptypes[] = {
/* refers to rxq_cq_to_pkt_type() */
RTE_PTYPE_L2_ETHER,
RTE_PTYPE_L3_IPV4_EXT_UNKNOWN,
RTE_PTYPE_L3_IPV6_EXT_UNKNOWN,
RTE_PTYPE_L4_NONFRAG,
RTE_PTYPE_L4_FRAG,
RTE_PTYPE_L4_TCP,
RTE_PTYPE_L4_UDP,
RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN,
RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN,
RTE_PTYPE_INNER_L4_NONFRAG,
RTE_PTYPE_INNER_L4_FRAG,
RTE_PTYPE_INNER_L4_TCP,
RTE_PTYPE_INNER_L4_UDP,
RTE_PTYPE_UNKNOWN
};
if (dev->rx_pkt_burst == mlx5_rx_burst ||
dev->rx_pkt_burst == mlx5_rx_burst_mprq ||
dev->rx_pkt_burst == mlx5_rx_burst_vec)
return ptypes;
return NULL;
}
/**
* Retrieve the master device for representor in the same switch domain.
*
* @param dev
* Pointer to representor Ethernet device structure.
*
* @return
* Master device structure on success, NULL otherwise.
*/
static struct rte_eth_dev *
mlx5_find_master_dev(struct rte_eth_dev *dev)
{
struct mlx5_priv *priv;
uint16_t port_id;
uint16_t domain_id;
priv = dev->data->dev_private;
domain_id = priv->domain_id;
assert(priv->representor);
RTE_ETH_FOREACH_DEV_OF(port_id, dev->device) {
priv = rte_eth_devices[port_id].data->dev_private;
if (priv &&
priv->master &&
priv->domain_id == domain_id)
return &rte_eth_devices[port_id];
}
return NULL;
}
/**
* DPDK callback to retrieve physical link information.
*
* @param dev
* Pointer to Ethernet device structure.
* @param[out] link
* Storage for current link status.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
mlx5_link_update_unlocked_gset(struct rte_eth_dev *dev,
struct rte_eth_link *link)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct ethtool_cmd edata = {
.cmd = ETHTOOL_GSET /* Deprecated since Linux v4.5. */
};
struct ifreq ifr;
struct rte_eth_link dev_link;
int link_speed = 0;
int ret;
ret = mlx5_ifreq(dev, SIOCGIFFLAGS, &ifr);
if (ret) {
DRV_LOG(WARNING, "port %u ioctl(SIOCGIFFLAGS) failed: %s",
dev->data->port_id, strerror(rte_errno));
return ret;
}
dev_link = (struct rte_eth_link) {
.link_status = ((ifr.ifr_flags & IFF_UP) &&
(ifr.ifr_flags & IFF_RUNNING)),
};
ifr = (struct ifreq) {
.ifr_data = (void *)&edata,
};
ret = mlx5_ifreq(dev, SIOCETHTOOL, &ifr);
if (ret) {
if (ret == -ENOTSUP && priv->representor) {
struct rte_eth_dev *master;
/*
* For representors we can try to inherit link
* settings from the master device. Actually
* link settings do not make a lot of sense
* for representors due to missing physical
* link. The old kernel drivers supported
* emulated settings query for representors,
* the new ones do not, so we have to add
* this code for compatibility issues.
*/
master = mlx5_find_master_dev(dev);
if (master) {
ifr = (struct ifreq) {
.ifr_data = (void *)&edata,
};
ret = mlx5_ifreq(master, SIOCETHTOOL, &ifr);
}
}
if (ret) {
DRV_LOG(WARNING,
"port %u ioctl(SIOCETHTOOL,"
" ETHTOOL_GSET) failed: %s",
dev->data->port_id, strerror(rte_errno));
return ret;
}
}
link_speed = ethtool_cmd_speed(&edata);
if (link_speed == -1)
dev_link.link_speed = ETH_SPEED_NUM_NONE;
else
dev_link.link_speed = link_speed;
priv->link_speed_capa = 0;
if (edata.supported & SUPPORTED_Autoneg)
priv->link_speed_capa |= ETH_LINK_SPEED_AUTONEG;
if (edata.supported & (SUPPORTED_1000baseT_Full |
SUPPORTED_1000baseKX_Full))
priv->link_speed_capa |= ETH_LINK_SPEED_1G;
if (edata.supported & SUPPORTED_10000baseKR_Full)
priv->link_speed_capa |= ETH_LINK_SPEED_10G;
if (edata.supported & (SUPPORTED_40000baseKR4_Full |
SUPPORTED_40000baseCR4_Full |
SUPPORTED_40000baseSR4_Full |
SUPPORTED_40000baseLR4_Full))
priv->link_speed_capa |= ETH_LINK_SPEED_40G;
dev_link.link_duplex = ((edata.duplex == DUPLEX_HALF) ?
ETH_LINK_HALF_DUPLEX : ETH_LINK_FULL_DUPLEX);
dev_link.link_autoneg = !(dev->data->dev_conf.link_speeds &
ETH_LINK_SPEED_FIXED);
if (((dev_link.link_speed && !dev_link.link_status) ||
(!dev_link.link_speed && dev_link.link_status))) {
rte_errno = EAGAIN;
return -rte_errno;
}
*link = dev_link;
return 0;
}
/**
* Retrieve physical link information (unlocked version using new ioctl).
*
* @param dev
* Pointer to Ethernet device structure.
* @param[out] link
* Storage for current link status.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
mlx5_link_update_unlocked_gs(struct rte_eth_dev *dev,
struct rte_eth_link *link)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct ethtool_link_settings gcmd = { .cmd = ETHTOOL_GLINKSETTINGS };
struct ifreq ifr;
struct rte_eth_link dev_link;
struct rte_eth_dev *master = NULL;
uint64_t sc;
int ret;
ret = mlx5_ifreq(dev, SIOCGIFFLAGS, &ifr);
if (ret) {
DRV_LOG(WARNING, "port %u ioctl(SIOCGIFFLAGS) failed: %s",
dev->data->port_id, strerror(rte_errno));
return ret;
}
dev_link = (struct rte_eth_link) {
.link_status = ((ifr.ifr_flags & IFF_UP) &&
(ifr.ifr_flags & IFF_RUNNING)),
};
ifr = (struct ifreq) {
.ifr_data = (void *)&gcmd,
};
ret = mlx5_ifreq(dev, SIOCETHTOOL, &ifr);
if (ret) {
if (ret == -ENOTSUP && priv->representor) {
/*
* For representors we can try to inherit link
* settings from the master device. Actually
* link settings do not make a lot of sense
* for representors due to missing physical
* link. The old kernel drivers supported
* emulated settings query for representors,
* the new ones do not, so we have to add
* this code for compatibility issues.
*/
master = mlx5_find_master_dev(dev);
if (master) {
ifr = (struct ifreq) {
.ifr_data = (void *)&gcmd,
};
ret = mlx5_ifreq(master, SIOCETHTOOL, &ifr);
}
}
if (ret) {
DRV_LOG(DEBUG,
"port %u ioctl(SIOCETHTOOL,"
" ETHTOOL_GLINKSETTINGS) failed: %s",
dev->data->port_id, strerror(rte_errno));
return ret;
}
}
gcmd.link_mode_masks_nwords = -gcmd.link_mode_masks_nwords;
alignas(struct ethtool_link_settings)
uint8_t data[offsetof(struct ethtool_link_settings, link_mode_masks) +
sizeof(uint32_t) * gcmd.link_mode_masks_nwords * 3];
struct ethtool_link_settings *ecmd = (void *)data;
*ecmd = gcmd;
ifr.ifr_data = (void *)ecmd;
ret = mlx5_ifreq(master ? master : dev, SIOCETHTOOL, &ifr);
if (ret) {
DRV_LOG(DEBUG,
"port %u ioctl(SIOCETHTOOL,"
"ETHTOOL_GLINKSETTINGS) failed: %s",
dev->data->port_id, strerror(rte_errno));
return ret;
}
dev_link.link_speed = (ecmd->speed == UINT32_MAX) ? ETH_SPEED_NUM_NONE :
ecmd->speed;
sc = ecmd->link_mode_masks[0] |
((uint64_t)ecmd->link_mode_masks[1] << 32);
priv->link_speed_capa = 0;
if (sc & MLX5_BITSHIFT(ETHTOOL_LINK_MODE_Autoneg_BIT))
priv->link_speed_capa |= ETH_LINK_SPEED_AUTONEG;
if (sc & (MLX5_BITSHIFT(ETHTOOL_LINK_MODE_1000baseT_Full_BIT) |
MLX5_BITSHIFT(ETHTOOL_LINK_MODE_1000baseKX_Full_BIT)))
priv->link_speed_capa |= ETH_LINK_SPEED_1G;
if (sc & (MLX5_BITSHIFT(ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT) |
MLX5_BITSHIFT(ETHTOOL_LINK_MODE_10000baseKR_Full_BIT) |
MLX5_BITSHIFT(ETHTOOL_LINK_MODE_10000baseR_FEC_BIT)))
priv->link_speed_capa |= ETH_LINK_SPEED_10G;
if (sc & (MLX5_BITSHIFT(ETHTOOL_LINK_MODE_20000baseMLD2_Full_BIT) |
MLX5_BITSHIFT(ETHTOOL_LINK_MODE_20000baseKR2_Full_BIT)))
priv->link_speed_capa |= ETH_LINK_SPEED_20G;
if (sc & (MLX5_BITSHIFT(ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT) |
MLX5_BITSHIFT(ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT) |
MLX5_BITSHIFT(ETHTOOL_LINK_MODE_40000baseSR4_Full_BIT) |
MLX5_BITSHIFT(ETHTOOL_LINK_MODE_40000baseLR4_Full_BIT)))
priv->link_speed_capa |= ETH_LINK_SPEED_40G;
if (sc & (MLX5_BITSHIFT(ETHTOOL_LINK_MODE_56000baseKR4_Full_BIT) |
MLX5_BITSHIFT(ETHTOOL_LINK_MODE_56000baseCR4_Full_BIT) |
MLX5_BITSHIFT(ETHTOOL_LINK_MODE_56000baseSR4_Full_BIT) |
MLX5_BITSHIFT(ETHTOOL_LINK_MODE_56000baseLR4_Full_BIT)))
priv->link_speed_capa |= ETH_LINK_SPEED_56G;
if (sc & (MLX5_BITSHIFT(ETHTOOL_LINK_MODE_25000baseCR_Full_BIT) |
MLX5_BITSHIFT(ETHTOOL_LINK_MODE_25000baseKR_Full_BIT) |
MLX5_BITSHIFT(ETHTOOL_LINK_MODE_25000baseSR_Full_BIT)))
priv->link_speed_capa |= ETH_LINK_SPEED_25G;
if (sc & (MLX5_BITSHIFT(ETHTOOL_LINK_MODE_50000baseCR2_Full_BIT) |
MLX5_BITSHIFT(ETHTOOL_LINK_MODE_50000baseKR2_Full_BIT)))
priv->link_speed_capa |= ETH_LINK_SPEED_50G;
if (sc & (MLX5_BITSHIFT(ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT) |
MLX5_BITSHIFT(ETHTOOL_LINK_MODE_100000baseSR4_Full_BIT) |
MLX5_BITSHIFT(ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT) |
MLX5_BITSHIFT(ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT)))
priv->link_speed_capa |= ETH_LINK_SPEED_100G;
dev_link.link_duplex = ((ecmd->duplex == DUPLEX_HALF) ?
ETH_LINK_HALF_DUPLEX : ETH_LINK_FULL_DUPLEX);
dev_link.link_autoneg = !(dev->data->dev_conf.link_speeds &
ETH_LINK_SPEED_FIXED);
if (((dev_link.link_speed && !dev_link.link_status) ||
(!dev_link.link_speed && dev_link.link_status))) {
rte_errno = EAGAIN;
return -rte_errno;
}
*link = dev_link;
return 0;
}
/**
* DPDK callback to retrieve physical link information.
*
* @param dev
* Pointer to Ethernet device structure.
* @param wait_to_complete
* Wait for request completion.
*
* @return
* 0 if link status was not updated, positive if it was, a negative errno
* value otherwise and rte_errno is set.
*/
int
mlx5_link_update(struct rte_eth_dev *dev, int wait_to_complete)
{
int ret;
struct rte_eth_link dev_link;
time_t start_time = time(NULL);
do {
ret = mlx5_link_update_unlocked_gs(dev, &dev_link);
if (ret == -ENOTSUP)
ret = mlx5_link_update_unlocked_gset(dev, &dev_link);
if (ret == 0)
break;
/* Handle wait to complete situation. */
if (wait_to_complete && ret == -EAGAIN) {
if (abs((int)difftime(time(NULL), start_time)) <
MLX5_LINK_STATUS_TIMEOUT) {
usleep(0);
continue;
} else {
rte_errno = EBUSY;
return -rte_errno;
}
} else if (ret < 0) {
return ret;
}
} while (wait_to_complete);
ret = !!memcmp(&dev->data->dev_link, &dev_link,
sizeof(struct rte_eth_link));
dev->data->dev_link = dev_link;
return ret;
}
/**
* DPDK callback to change the MTU.
*
* @param dev
* Pointer to Ethernet device structure.
* @param in_mtu
* New MTU.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
{
struct mlx5_priv *priv = dev->data->dev_private;
uint16_t kern_mtu = 0;
int ret;
ret = mlx5_get_mtu(dev, &kern_mtu);
if (ret)
return ret;
/* Set kernel interface MTU first. */
ret = mlx5_set_mtu(dev, mtu);
if (ret)
return ret;
ret = mlx5_get_mtu(dev, &kern_mtu);
if (ret)
return ret;
if (kern_mtu == mtu) {
priv->mtu = mtu;
DRV_LOG(DEBUG, "port %u adapter MTU set to %u",
dev->data->port_id, mtu);
return 0;
}
rte_errno = EAGAIN;
return -rte_errno;
}
/**
* DPDK callback to get flow control status.
*
* @param dev
* Pointer to Ethernet device structure.
* @param[out] fc_conf
* Flow control output buffer.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_dev_get_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
{
struct ifreq ifr;
struct ethtool_pauseparam ethpause = {
.cmd = ETHTOOL_GPAUSEPARAM
};
int ret;
ifr.ifr_data = (void *)&ethpause;
ret = mlx5_ifreq(dev, SIOCETHTOOL, &ifr);
if (ret) {
DRV_LOG(WARNING,
"port %u ioctl(SIOCETHTOOL, ETHTOOL_GPAUSEPARAM) failed:"
" %s",
dev->data->port_id, strerror(rte_errno));
return ret;
}
fc_conf->autoneg = ethpause.autoneg;
if (ethpause.rx_pause && ethpause.tx_pause)
fc_conf->mode = RTE_FC_FULL;
else if (ethpause.rx_pause)
fc_conf->mode = RTE_FC_RX_PAUSE;
else if (ethpause.tx_pause)
fc_conf->mode = RTE_FC_TX_PAUSE;
else
fc_conf->mode = RTE_FC_NONE;
return 0;
}
/**
* DPDK callback to modify flow control parameters.
*
* @param dev
* Pointer to Ethernet device structure.
* @param[in] fc_conf
* Flow control parameters.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_dev_set_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
{
struct ifreq ifr;
struct ethtool_pauseparam ethpause = {
.cmd = ETHTOOL_SPAUSEPARAM
};
int ret;
ifr.ifr_data = (void *)&ethpause;
ethpause.autoneg = fc_conf->autoneg;
if (((fc_conf->mode & RTE_FC_FULL) == RTE_FC_FULL) ||
(fc_conf->mode & RTE_FC_RX_PAUSE))
ethpause.rx_pause = 1;
else
ethpause.rx_pause = 0;
if (((fc_conf->mode & RTE_FC_FULL) == RTE_FC_FULL) ||
(fc_conf->mode & RTE_FC_TX_PAUSE))
ethpause.tx_pause = 1;
else
ethpause.tx_pause = 0;
ret = mlx5_ifreq(dev, SIOCETHTOOL, &ifr);
if (ret) {
DRV_LOG(WARNING,
"port %u ioctl(SIOCETHTOOL, ETHTOOL_SPAUSEPARAM)"
" failed: %s",
dev->data->port_id, strerror(rte_errno));
return ret;
}
return 0;
}
/**
* Get PCI information by sysfs device path.
*
* @param dev_path
* Pointer to device sysfs folder name.
* @param[out] pci_addr
* PCI bus address output buffer.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_dev_to_pci_addr(const char *dev_path,
struct rte_pci_addr *pci_addr)
{
FILE *file;
char line[32];
MKSTR(path, "%s/device/uevent", dev_path);
file = fopen(path, "rb");
if (file == NULL) {
rte_errno = errno;
return -rte_errno;
}
while (fgets(line, sizeof(line), file) == line) {
size_t len = strlen(line);
int ret;
/* Truncate long lines. */
if (len == (sizeof(line) - 1))
while (line[(len - 1)] != '\n') {
ret = fgetc(file);
if (ret == EOF)
break;
line[(len - 1)] = ret;
}
/* Extract information. */
if (sscanf(line,
"PCI_SLOT_NAME="
"%" SCNx32 ":%" SCNx8 ":%" SCNx8 ".%" SCNx8 "\n",
&pci_addr->domain,
&pci_addr->bus,
&pci_addr->devid,
&pci_addr->function) == 4) {
ret = 0;
break;
}
}
fclose(file);
return 0;
}
/**
* Handle asynchronous removal event for entire multiport device.
*
* @param sh
* Infiniband device shared context.
*/
static void
mlx5_dev_interrupt_device_fatal(struct mlx5_ibv_shared *sh)
{
uint32_t i;
for (i = 0; i < sh->max_port; ++i) {
struct rte_eth_dev *dev;
if (sh->port[i].ih_port_id >= RTE_MAX_ETHPORTS) {
/*
* Or not existing port either no
* handler installed for this port.
*/
continue;
}
dev = &rte_eth_devices[sh->port[i].ih_port_id];
assert(dev);
if (dev->data->dev_conf.intr_conf.rmv)
_rte_eth_dev_callback_process
(dev, RTE_ETH_EVENT_INTR_RMV, NULL);
}
}
/**
* Handle shared asynchronous events the NIC (removal event
* and link status change). Supports multiport IB device.
*
* @param cb_arg
* Callback argument.
*/
void
mlx5_dev_interrupt_handler(void *cb_arg)
{
struct mlx5_ibv_shared *sh = cb_arg;
struct ibv_async_event event;
/* Read all message from the IB device and acknowledge them. */
for (;;) {
struct rte_eth_dev *dev;
uint32_t tmp;
if (mlx5_glue->get_async_event(sh->ctx, &event))
break;
/* Retrieve and check IB port index. */
tmp = (uint32_t)event.element.port_num;
if (!tmp && event.event_type == IBV_EVENT_DEVICE_FATAL) {
/*
* The DEVICE_FATAL event is called once for
* entire device without port specifying.
* We should notify all existing ports.
*/
mlx5_glue->ack_async_event(&event);
mlx5_dev_interrupt_device_fatal(sh);
continue;
}
assert(tmp && (tmp <= sh->max_port));
if (!tmp) {
/* Unsupported devive level event. */
mlx5_glue->ack_async_event(&event);
DRV_LOG(DEBUG,
"unsupported common event (type %d)",
event.event_type);
continue;
}
if (tmp > sh->max_port) {
/* Invalid IB port index. */
mlx5_glue->ack_async_event(&event);
DRV_LOG(DEBUG,
"cannot handle an event (type %d)"
"due to invalid IB port index (%u)",
event.event_type, tmp);
continue;
}
if (sh->port[tmp - 1].ih_port_id >= RTE_MAX_ETHPORTS) {
/* No handler installed. */
mlx5_glue->ack_async_event(&event);
DRV_LOG(DEBUG,
"cannot handle an event (type %d)"
"due to no handler installed for port %u",
event.event_type, tmp);
continue;
}
/* Retrieve ethernet device descriptor. */
tmp = sh->port[tmp - 1].ih_port_id;
dev = &rte_eth_devices[tmp];
assert(dev);
if ((event.event_type == IBV_EVENT_PORT_ACTIVE ||
event.event_type == IBV_EVENT_PORT_ERR) &&
dev->data->dev_conf.intr_conf.lsc) {
mlx5_glue->ack_async_event(&event);
if (mlx5_link_update(dev, 0) == -EAGAIN) {
usleep(0);
continue;
}
_rte_eth_dev_callback_process
(dev, RTE_ETH_EVENT_INTR_LSC, NULL);
continue;
}
DRV_LOG(DEBUG,
"port %u cannot handle an unknown event (type %d)",
dev->data->port_id, event.event_type);
mlx5_glue->ack_async_event(&event);
}
}
/*
* Unregister callback handler safely. The handler may be active
* while we are trying to unregister it, in this case code -EAGAIN
* is returned by rte_intr_callback_unregister(). This routine checks
* the return code and tries to unregister handler again.
*
* @param handle
* interrupt handle
* @param cb_fn
* pointer to callback routine
* @cb_arg
* opaque callback parameter
*/
void
mlx5_intr_callback_unregister(const struct rte_intr_handle *handle,
rte_intr_callback_fn cb_fn, void *cb_arg)
{
/*
* Try to reduce timeout management overhead by not calling
* the timer related routines on the first iteration. If the
* unregistering succeeds on first call there will be no
* timer calls at all.
*/
uint64_t twait = 0;
uint64_t start = 0;
do {
int ret;
ret = rte_intr_callback_unregister(handle, cb_fn, cb_arg);
if (ret >= 0)
return;
if (ret != -EAGAIN) {
DRV_LOG(INFO, "failed to unregister interrupt"
" handler (error: %d)", ret);
assert(false);
return;
}
if (twait) {
struct timespec onems;
/* Wait one millisecond and try again. */
onems.tv_sec = 0;
onems.tv_nsec = NS_PER_S / MS_PER_S;
nanosleep(&onems, 0);
/* Check whether one second elapsed. */
if ((rte_get_timer_cycles() - start) <= twait)
continue;
} else {
/*
* We get the amount of timer ticks for one second.
* If this amount elapsed it means we spent one
* second in waiting. This branch is executed once
* on first iteration.
*/
twait = rte_get_timer_hz();
assert(twait);
}
/*
* Timeout elapsed, show message (once a second) and retry.
* We have no other acceptable option here, if we ignore
* the unregistering return code the handler will not
* be unregistered, fd will be closed and we may get the
* crush. Hanging and messaging in the loop seems not to be
* the worst choice.
*/
DRV_LOG(INFO, "Retrying to unregister interrupt handler");
start = rte_get_timer_cycles();
} while (true);
}
/**
* Handle DEVX interrupts from the NIC.
* This function is probably called from the DPDK host thread.
*
* @param cb_arg
* Callback argument.
*/
void
mlx5_dev_interrupt_handler_devx(void *cb_arg)
{
#ifndef HAVE_IBV_DEVX_ASYNC
(void)cb_arg;
return;
#else
struct mlx5_ibv_shared *sh = cb_arg;
union {
struct mlx5dv_devx_async_cmd_hdr cmd_resp;
uint8_t buf[MLX5_ST_SZ_BYTES(query_flow_counter_out) +
MLX5_ST_SZ_BYTES(traffic_counter) +
sizeof(struct mlx5dv_devx_async_cmd_hdr)];
} out;
uint8_t *buf = out.buf + sizeof(out.cmd_resp);
while (!mlx5_glue->devx_get_async_cmd_comp(sh->devx_comp,
&out.cmd_resp,
sizeof(out.buf)))
mlx5_flow_async_pool_query_handle
(sh, (uint64_t)out.cmd_resp.wr_id,
mlx5_devx_get_out_command_status(buf));
#endif /* HAVE_IBV_DEVX_ASYNC */
}
/**
* Uninstall shared asynchronous device events handler.
* This function is implemented to support event sharing
* between multiple ports of single IB device.
*
* @param dev
* Pointer to Ethernet device.
*/
static void
mlx5_dev_shared_handler_uninstall(struct rte_eth_dev *dev)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_ibv_shared *sh = priv->sh;
if (rte_eal_process_type() != RTE_PROC_PRIMARY)
return;
pthread_mutex_lock(&sh->intr_mutex);
assert(priv->ibv_port);
assert(priv->ibv_port <= sh->max_port);
assert(dev->data->port_id < RTE_MAX_ETHPORTS);
if (sh->port[priv->ibv_port - 1].ih_port_id >= RTE_MAX_ETHPORTS)
goto exit;
assert(sh->port[priv->ibv_port - 1].ih_port_id ==
(uint32_t)dev->data->port_id);
assert(sh->intr_cnt);
sh->port[priv->ibv_port - 1].ih_port_id = RTE_MAX_ETHPORTS;
if (!sh->intr_cnt || --sh->intr_cnt)
goto exit;
mlx5_intr_callback_unregister(&sh->intr_handle,
mlx5_dev_interrupt_handler, sh);
sh->intr_handle.fd = 0;
sh->intr_handle.type = RTE_INTR_HANDLE_UNKNOWN;
if (sh->intr_handle_devx.fd) {
rte_intr_callback_unregister(&sh->intr_handle_devx,
mlx5_dev_interrupt_handler_devx,
sh);
sh->intr_handle_devx.fd = 0;
sh->intr_handle_devx.type = RTE_INTR_HANDLE_UNKNOWN;
}
if (sh->devx_comp) {
mlx5_glue->devx_destroy_cmd_comp(sh->devx_comp);
sh->devx_comp = NULL;
}
exit:
pthread_mutex_unlock(&sh->intr_mutex);
}
/**
* Install shared asynchronous device events handler.
* This function is implemented to support event sharing
* between multiple ports of single IB device.
*
* @param dev
* Pointer to Ethernet device.
*/
static void
mlx5_dev_shared_handler_install(struct rte_eth_dev *dev)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_ibv_shared *sh = priv->sh;
int ret;
int flags;
if (rte_eal_process_type() != RTE_PROC_PRIMARY)
return;
pthread_mutex_lock(&sh->intr_mutex);
assert(priv->ibv_port);
assert(priv->ibv_port <= sh->max_port);
assert(dev->data->port_id < RTE_MAX_ETHPORTS);
if (sh->port[priv->ibv_port - 1].ih_port_id < RTE_MAX_ETHPORTS) {
/* The handler is already installed for this port. */
assert(sh->intr_cnt);
goto exit;
}
sh->port[priv->ibv_port - 1].ih_port_id = (uint32_t)dev->data->port_id;
if (sh->intr_cnt) {
sh->intr_cnt++;
goto exit;
}
/* No shared handler installed. */
assert(sh->ctx->async_fd > 0);
flags = fcntl(sh->ctx->async_fd, F_GETFL);
ret = fcntl(sh->ctx->async_fd, F_SETFL, flags | O_NONBLOCK);
if (ret) {
DRV_LOG(INFO, "failed to change file descriptor"
" async event queue");
goto error;
}
sh->intr_handle.fd = sh->ctx->async_fd;
sh->intr_handle.type = RTE_INTR_HANDLE_EXT;
rte_intr_callback_register(&sh->intr_handle,
mlx5_dev_interrupt_handler, sh);
if (priv->config.devx) {
#ifndef HAVE_IBV_DEVX_ASYNC
goto error_unregister;
#else
sh->devx_comp = mlx5_glue->devx_create_cmd_comp(sh->ctx);
if (sh->devx_comp) {
flags = fcntl(sh->devx_comp->fd, F_GETFL);
ret = fcntl(sh->devx_comp->fd, F_SETFL,
flags | O_NONBLOCK);
if (ret) {
DRV_LOG(INFO, "failed to change file descriptor"
" devx async event queue");
goto error_unregister;
}
sh->intr_handle_devx.fd = sh->devx_comp->fd;
sh->intr_handle_devx.type = RTE_INTR_HANDLE_EXT;
rte_intr_callback_register
(&sh->intr_handle_devx,
mlx5_dev_interrupt_handler_devx, sh);
} else {
DRV_LOG(INFO, "failed to create devx async command "
"completion");
goto error_unregister;
}
#endif /* HAVE_IBV_DEVX_ASYNC */
}
sh->intr_cnt++;
goto exit;
error_unregister:
rte_intr_callback_unregister(&sh->intr_handle,
mlx5_dev_interrupt_handler, sh);
error:
/* Indicate there will be no interrupts. */
dev->data->dev_conf.intr_conf.lsc = 0;
dev->data->dev_conf.intr_conf.rmv = 0;
sh->intr_handle.fd = 0;
sh->intr_handle.type = RTE_INTR_HANDLE_UNKNOWN;
sh->port[priv->ibv_port - 1].ih_port_id = RTE_MAX_ETHPORTS;
exit:
pthread_mutex_unlock(&sh->intr_mutex);
}
/**
* Uninstall interrupt handler.
*
* @param dev
* Pointer to Ethernet device.
*/
void
mlx5_dev_interrupt_handler_uninstall(struct rte_eth_dev *dev)
{
mlx5_dev_shared_handler_uninstall(dev);
}
/**
* Install interrupt handler.
*
* @param dev
* Pointer to Ethernet device.
*/
void
mlx5_dev_interrupt_handler_install(struct rte_eth_dev *dev)
{
mlx5_dev_shared_handler_install(dev);
}
/**
* DPDK callback to bring the link DOWN.
*
* @param dev
* Pointer to Ethernet device structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_set_link_down(struct rte_eth_dev *dev)
{
return mlx5_set_flags(dev, ~IFF_UP, ~IFF_UP);
}
/**
* DPDK callback to bring the link UP.
*
* @param dev
* Pointer to Ethernet device structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_set_link_up(struct rte_eth_dev *dev)
{
return mlx5_set_flags(dev, ~IFF_UP, IFF_UP);
}
/**
* Configure the RX function to use.
*
* @param dev
* Pointer to private data structure.
*
* @return
* Pointer to selected Rx burst function.
*/
eth_rx_burst_t
mlx5_select_rx_function(struct rte_eth_dev *dev)
{
eth_rx_burst_t rx_pkt_burst = mlx5_rx_burst;
assert(dev != NULL);
if (mlx5_check_vec_rx_support(dev) > 0) {
rx_pkt_burst = mlx5_rx_burst_vec;
DRV_LOG(DEBUG, "port %u selected Rx vectorized function",
dev->data->port_id);
} else if (mlx5_mprq_enabled(dev)) {
rx_pkt_burst = mlx5_rx_burst_mprq;
}
return rx_pkt_burst;
}
/**
* Check if mlx5 device was removed.
*
* @param dev
* Pointer to Ethernet device structure.
*
* @return
* 1 when device is removed, otherwise 0.
*/
int
mlx5_is_removed(struct rte_eth_dev *dev)
{
struct ibv_device_attr device_attr;
struct mlx5_priv *priv = dev->data->dev_private;
if (mlx5_glue->query_device(priv->sh->ctx, &device_attr) == EIO)
return 1;
return 0;
}
/**
* Get port ID list of mlx5 instances sharing a common device.
*
* @param[in] dev
* Device to look for.
* @param[out] port_list
* Result buffer for collected port IDs.
* @param port_list_n
* Maximum number of entries in result buffer. If 0, @p port_list can be
* NULL.
*
* @return
* Number of matching instances regardless of the @p port_list_n
* parameter, 0 if none were found.
*/
unsigned int
mlx5_dev_to_port_id(const struct rte_device *dev, uint16_t *port_list,
unsigned int port_list_n)
{
uint16_t id;
unsigned int n = 0;
RTE_ETH_FOREACH_DEV_OF(id, dev) {
if (n < port_list_n)
port_list[n] = id;
n++;
}
return n;
}
/**
* Get the E-Switch domain id this port belongs to.
*
* @param[in] port
* Device port id.
* @param[out] es_domain_id
* E-Switch domain id.
* @param[out] es_port_id
* The port id of the port in the E-Switch.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_port_to_eswitch_info(uint16_t port,
uint16_t *es_domain_id, uint16_t *es_port_id)
{
struct rte_eth_dev *dev;
struct mlx5_priv *priv;
if (port >= RTE_MAX_ETHPORTS) {
rte_errno = EINVAL;
return -rte_errno;
}
if (!rte_eth_dev_is_valid_port(port)) {
rte_errno = ENODEV;
return -rte_errno;
}
dev = &rte_eth_devices[port];
priv = dev->data->dev_private;
if (!(priv->representor || priv->master)) {
rte_errno = EINVAL;
return -rte_errno;
}
if (es_domain_id)
*es_domain_id = priv->domain_id;
if (es_port_id)
*es_port_id = priv->vport_id;
return 0;
}
/**
* Get switch information associated with network interface.
*
* @param ifindex
* Network interface index.
* @param[out] info
* Switch information object, populated in case of success.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_sysfs_switch_info(unsigned int ifindex, struct mlx5_switch_info *info)
{
char ifname[IF_NAMESIZE];
char port_name[IF_NAMESIZE];
FILE *file;
struct mlx5_switch_info data = {
.master = 0,
.representor = 0,
.name_type = MLX5_PHYS_PORT_NAME_TYPE_NOTSET,
.port_name = 0,
.switch_id = 0,
};
DIR *dir;
bool port_switch_id_set = false;
bool device_dir = false;
char c;
int ret;
if (!if_indextoname(ifindex, ifname)) {
rte_errno = errno;
return -rte_errno;
}
MKSTR(phys_port_name, "/sys/class/net/%s/phys_port_name",
ifname);
MKSTR(phys_switch_id, "/sys/class/net/%s/phys_switch_id",
ifname);
MKSTR(pci_device, "/sys/class/net/%s/device",
ifname);
file = fopen(phys_port_name, "rb");
if (file != NULL) {
ret = fscanf(file, "%s", port_name);
fclose(file);
if (ret == 1)
mlx5_translate_port_name(port_name, &data);
}
file = fopen(phys_switch_id, "rb");
if (file == NULL) {
rte_errno = errno;
return -rte_errno;
}
port_switch_id_set =
fscanf(file, "%" SCNx64 "%c", &data.switch_id, &c) == 2 &&
c == '\n';
fclose(file);
dir = opendir(pci_device);
if (dir != NULL) {
closedir(dir);
device_dir = true;
}
if (port_switch_id_set) {
/* We have some E-Switch configuration. */
mlx5_sysfs_check_switch_info(device_dir, &data);
}
*info = data;
assert(!(data.master && data.representor));
if (data.master && data.representor) {
DRV_LOG(ERR, "ifindex %u device is recognized as master"
" and as representor", ifindex);
rte_errno = ENODEV;
return -rte_errno;
}
return 0;
}
/**
* Analyze gathered port parameters via Netlink to recognize master
* and representor devices for E-Switch configuration.
*
* @param[in] num_vf_set
* flag of presence of number of VFs port attribute.
* @param[inout] switch_info
* Port information, including port name as a number and port name
* type if recognized
*
* @return
* master and representor flags are set in switch_info according to
* recognized parameters (if any).
*/
void
mlx5_nl_check_switch_info(bool num_vf_set,
struct mlx5_switch_info *switch_info)
{
switch (switch_info->name_type) {
case MLX5_PHYS_PORT_NAME_TYPE_UNKNOWN:
/*
* Name is not recognized, assume the master,
* check the number of VFs key presence.
*/
switch_info->master = num_vf_set;
break;
case MLX5_PHYS_PORT_NAME_TYPE_NOTSET:
/*
* Name is not set, this assumes the legacy naming
* schema for master, just check if there is a
* number of VFs key.
*/
switch_info->master = num_vf_set;
break;
case MLX5_PHYS_PORT_NAME_TYPE_UPLINK:
/* New uplink naming schema recognized. */
switch_info->master = 1;
break;
case MLX5_PHYS_PORT_NAME_TYPE_LEGACY:
/* Legacy representors naming schema. */
switch_info->representor = !num_vf_set;
break;
case MLX5_PHYS_PORT_NAME_TYPE_PFVF:
/* New representors naming schema. */
switch_info->representor = 1;
break;
}
}
/**
* Analyze gathered port parameters via sysfs to recognize master
* and representor devices for E-Switch configuration.
*
* @param[in] device_dir
* flag of presence of "device" directory under port device key.
* @param[inout] switch_info
* Port information, including port name as a number and port name
* type if recognized
*
* @return
* master and representor flags are set in switch_info according to
* recognized parameters (if any).
*/
void
mlx5_sysfs_check_switch_info(bool device_dir,
struct mlx5_switch_info *switch_info)
{
switch (switch_info->name_type) {
case MLX5_PHYS_PORT_NAME_TYPE_UNKNOWN:
/*
* Name is not recognized, assume the master,
* check the device directory presence.
*/
switch_info->master = device_dir;
break;
case MLX5_PHYS_PORT_NAME_TYPE_NOTSET:
/*
* Name is not set, this assumes the legacy naming
* schema for master, just check if there is
* a device directory.
*/
switch_info->master = device_dir;
break;
case MLX5_PHYS_PORT_NAME_TYPE_UPLINK:
/* New uplink naming schema recognized. */
switch_info->master = 1;
break;
case MLX5_PHYS_PORT_NAME_TYPE_LEGACY:
/* Legacy representors naming schema. */
switch_info->representor = !device_dir;
break;
case MLX5_PHYS_PORT_NAME_TYPE_PFVF:
/* New representors naming schema. */
switch_info->representor = 1;
break;
}
}
/**
* Extract port name, as a number, from sysfs or netlink information.
*
* @param[in] port_name_in
* String representing the port name.
* @param[out] port_info_out
* Port information, including port name as a number and port name
* type if recognized
*
* @return
* port_name field set according to recognized name format.
*/
void
mlx5_translate_port_name(const char *port_name_in,
struct mlx5_switch_info *port_info_out)
{
char pf_c1, pf_c2, vf_c1, vf_c2;
char *end;
int sc_items;
/*
* Check for port-name as a string of the form pf0vf0
* (support kernel ver >= 5.0 or OFED ver >= 4.6).
*/
sc_items = sscanf(port_name_in, "%c%c%d%c%c%d",
&pf_c1, &pf_c2, &port_info_out->pf_num,
&vf_c1, &vf_c2, &port_info_out->port_name);
if (sc_items == 6 &&
pf_c1 == 'p' && pf_c2 == 'f' &&
vf_c1 == 'v' && vf_c2 == 'f') {
port_info_out->name_type = MLX5_PHYS_PORT_NAME_TYPE_PFVF;
return;
}
/*
* Check for port-name as a string of the form p0
* (support kernel ver >= 5.0, or OFED ver >= 4.6).
*/
sc_items = sscanf(port_name_in, "%c%d",
&pf_c1, &port_info_out->port_name);
if (sc_items == 2 && pf_c1 == 'p') {
port_info_out->name_type = MLX5_PHYS_PORT_NAME_TYPE_UPLINK;
return;
}
/* Check for port-name as a number (support kernel ver < 5.0 */
errno = 0;
port_info_out->port_name = strtol(port_name_in, &end, 0);
if (!errno &&
(size_t)(end - port_name_in) == strlen(port_name_in)) {
port_info_out->name_type = MLX5_PHYS_PORT_NAME_TYPE_LEGACY;
return;
}
port_info_out->name_type = MLX5_PHYS_PORT_NAME_TYPE_UNKNOWN;
return;
}
/**
* DPDK callback to retrieve plug-in module EEPROM information (type and size).
*
* @param dev
* Pointer to Ethernet device structure.
* @param[out] modinfo
* Storage for plug-in module EEPROM information.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_get_module_info(struct rte_eth_dev *dev,
struct rte_eth_dev_module_info *modinfo)
{
struct ethtool_modinfo info = {
.cmd = ETHTOOL_GMODULEINFO,
};
struct ifreq ifr = (struct ifreq) {
.ifr_data = (void *)&info,
};
int ret = 0;
if (!dev || !modinfo) {
DRV_LOG(WARNING, "missing argument, cannot get module info");
rte_errno = EINVAL;
return -rte_errno;
}
ret = mlx5_ifreq(dev, SIOCETHTOOL, &ifr);
if (ret) {
DRV_LOG(WARNING, "port %u ioctl(SIOCETHTOOL) failed: %s",
dev->data->port_id, strerror(rte_errno));
return ret;
}
modinfo->type = info.type;
modinfo->eeprom_len = info.eeprom_len;
return ret;
}
/**
* DPDK callback to retrieve plug-in module EEPROM data.
*
* @param dev
* Pointer to Ethernet device structure.
* @param[out] info
* Storage for plug-in module EEPROM data.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int mlx5_get_module_eeprom(struct rte_eth_dev *dev,
struct rte_dev_eeprom_info *info)
{
struct ethtool_eeprom *eeprom;
struct ifreq ifr;
int ret = 0;
if (!dev || !info) {
DRV_LOG(WARNING, "missing argument, cannot get module eeprom");
rte_errno = EINVAL;
return -rte_errno;
}
eeprom = rte_calloc(__func__, 1,
(sizeof(struct ethtool_eeprom) + info->length), 0);
if (!eeprom) {
DRV_LOG(WARNING, "port %u cannot allocate memory for "
"eeprom data", dev->data->port_id);
rte_errno = ENOMEM;
return -rte_errno;
}
eeprom->cmd = ETHTOOL_GMODULEEEPROM;
eeprom->offset = info->offset;
eeprom->len = info->length;
ifr = (struct ifreq) {
.ifr_data = (void *)eeprom,
};
ret = mlx5_ifreq(dev, SIOCETHTOOL, &ifr);
if (ret)
DRV_LOG(WARNING, "port %u ioctl(SIOCETHTOOL) failed: %s",
dev->data->port_id, strerror(rte_errno));
else
rte_memcpy(info->data, eeprom->data, info->length);
rte_free(eeprom);
return ret;
}
Reference in New Issue View Git Blame Copy Permalink