0cb4150f82
Use latest firmware 7.13.11.
7.13.11 FW changelog:
- Packets from a VF with pvid configured which were sent with a
different vlan were transmitted instead of being discarded.
- In some multi-function configurations, inter-PF and inter-VF
Tx switching is incorrectly enabled.
- Wrong assert code in FLR final cleanup in case it is sent not
after FLR.
- Chip may stall in very rare cases under heavy traffic with FW GRO
enabled.
- VF malicious notification error fixes.
- Default gre tunnel to IPGRE which allows proper RSS for IPGRE
packets, L2GRE traffic will reach single queue.
- Removes unnecessary internal mem config, latest FW performs this
autonomously.
Update the PMD version to 1.1.0.1.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
218 lines
6.4 KiB
ReStructuredText
218 lines
6.4 KiB
ReStructuredText
.. SPDX-License-Identifier: BSD-3-Clause
|
||
Copyright (c) 2015 QLogic Corporation
|
||
|
||
BNX2X Poll Mode Driver
|
||
======================
|
||
|
||
The BNX2X poll mode driver library (**librte_pmd_bnx2x**) implements support
|
||
for **QLogic 578xx** 10/20 Gbps family of adapters as well as their virtual
|
||
functions (VF) in SR-IOV context. It is supported on several standard Linux
|
||
distros like RHEL and SLES. It is compile-tested under FreeBSD OS.
|
||
|
||
More information can be found at `QLogic Corporation's Official Website
|
||
<http://www.qlogic.com>`_.
|
||
|
||
Supported Features
|
||
------------------
|
||
|
||
BNX2X PMD has support for:
|
||
|
||
- Base L2 features
|
||
- Unicast/multicast filtering
|
||
- Promiscuous mode
|
||
- Port hardware statistics
|
||
- SR-IOV VF
|
||
|
||
Non-supported Features
|
||
----------------------
|
||
|
||
The features not yet supported include:
|
||
|
||
- TSS (Transmit Side Scaling)
|
||
- RSS (Receive Side Scaling)
|
||
- LRO/TSO offload
|
||
- Checksum offload
|
||
- SR-IOV PF
|
||
- Rx TX scatter gather
|
||
|
||
Co-existence considerations
|
||
---------------------------
|
||
|
||
- QLogic 578xx CNAs support Ethernet, iSCSI and FCoE functionalities.
|
||
These functionalities are supported using QLogic Linux kernel
|
||
drivers bnx2x, cnic, bnx2i and bnx2fc. DPDK is supported on these
|
||
adapters using bnx2x PMD.
|
||
|
||
- When SR-IOV is not enabled on the adapter,
|
||
QLogic Linux kernel drivers (bnx2x, cnic, bnx2i and bnx2fc) and bnx2x
|
||
PMD can’t be attached to different PFs on a given QLogic 578xx
|
||
adapter.
|
||
A given adapter needs to be completely used by DPDK or Linux drivers.
|
||
Before binding DPDK driver to one or more PFs on the adapter,
|
||
please make sure to unbind Linux drivers from all PFs of the adapter.
|
||
If there are multiple adapters on the system, one or more adapters
|
||
can be used by DPDK driver completely and other adapters can be used
|
||
by Linux drivers completely.
|
||
|
||
- When SR-IOV is enabled on the adapter,
|
||
Linux kernel drivers (bnx2x, cnic, bnx2i and bnx2fc) can be bound
|
||
to the PFs of a given adapter and either bnx2x PMD or Linux drivers
|
||
bnx2x can be bound to the VFs of the adapter.
|
||
|
||
Supported QLogic NICs
|
||
---------------------
|
||
|
||
- 578xx
|
||
|
||
Prerequisites
|
||
-------------
|
||
|
||
- Requires firmware version **7.13.11.0**. It is included in most of the
|
||
standard Linux distros. If it is not available visit
|
||
`linux-firmware git repository <https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/bnx2x/bnx2x-e2-7.13.11.0.fw>`_
|
||
to get the required firmware.
|
||
|
||
Pre-Installation Configuration
|
||
------------------------------
|
||
|
||
Config File Options
|
||
~~~~~~~~~~~~~~~~~~~
|
||
|
||
The following options can be modified in the ``.config`` file. Please note that
|
||
enabling debugging options may affect system performance.
|
||
|
||
- ``CONFIG_RTE_LIBRTE_BNX2X_PMD`` (default **n**)
|
||
|
||
Toggle compilation of bnx2x driver. To use bnx2x PMD set this config parameter
|
||
to 'y'. Also, in order for firmware binary to load user will need zlib devel
|
||
package installed.
|
||
|
||
- ``CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX`` (default **n**)
|
||
|
||
Toggle display of transmit fast path run-time messages.
|
||
|
||
- ``CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX`` (default **n**)
|
||
|
||
Toggle display of receive fast path run-time messages.
|
||
|
||
- ``CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC`` (default **n**)
|
||
|
||
Toggle display of register reads and writes.
|
||
|
||
|
||
.. _bnx2x_driver-compilation:
|
||
|
||
Driver compilation and testing
|
||
------------------------------
|
||
|
||
Refer to the document :ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>`
|
||
for details.
|
||
|
||
SR-IOV: Prerequisites and sample Application Notes
|
||
--------------------------------------------------
|
||
|
||
This section provides instructions to configure SR-IOV with Linux OS.
|
||
|
||
#. Verify SR-IOV and ARI capabilities are enabled on the adapter using ``lspci``:
|
||
|
||
.. code-block:: console
|
||
|
||
lspci -s <slot> -vvv
|
||
|
||
Example output:
|
||
|
||
.. code-block:: console
|
||
|
||
[...]
|
||
Capabilities: [1b8 v1] Alternative Routing-ID Interpretation (ARI)
|
||
[...]
|
||
Capabilities: [1c0 v1] Single Root I/O Virtualization (SR-IOV)
|
||
[...]
|
||
Kernel driver in use: igb_uio
|
||
|
||
#. Load the kernel module:
|
||
|
||
.. code-block:: console
|
||
|
||
modprobe bnx2x
|
||
|
||
Example output:
|
||
|
||
.. code-block:: console
|
||
|
||
systemd-udevd[4848]: renamed network interface eth0 to ens5f0
|
||
systemd-udevd[4848]: renamed network interface eth1 to ens5f1
|
||
|
||
#. Bring up the PF ports:
|
||
|
||
.. code-block:: console
|
||
|
||
ifconfig ens5f0 up
|
||
ifconfig ens5f1 up
|
||
|
||
#. Create VF device(s):
|
||
|
||
Echo the number of VFs to be created into "sriov_numvfs" sysfs entry
|
||
of the parent PF.
|
||
|
||
Example output:
|
||
|
||
.. code-block:: console
|
||
|
||
echo 2 > /sys/devices/pci0000:00/0000:00:03.0/0000:81:00.0/sriov_numvfs
|
||
|
||
#. Assign VF MAC address:
|
||
|
||
Assign MAC address to the VF using iproute2 utility. The syntax is:
|
||
ip link set <PF iface> vf <VF id> mac <macaddr>
|
||
|
||
Example output:
|
||
|
||
.. code-block:: console
|
||
|
||
ip link set ens5f0 vf 0 mac 52:54:00:2f:9d:e8
|
||
|
||
#. PCI Passthrough:
|
||
|
||
The VF devices may be passed through to the guest VM using virt-manager or
|
||
virsh etc. bnx2x PMD should be used to bind the VF devices in the guest VM
|
||
using the instructions outlined in the Application notes below.
|
||
|
||
#. Running testpmd:
|
||
(Supply ``--log-level="pmd.net.bnx2x.driver",7`` to view informational messages):
|
||
|
||
Follow instructions available in the document
|
||
:ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>`
|
||
to run testpmd.
|
||
|
||
Example output:
|
||
|
||
.. code-block:: console
|
||
|
||
[...]
|
||
EAL: PCI device 0000:84:00.0 on NUMA socket 1
|
||
EAL: probe driver: 14e4:168e rte_bnx2x_pmd
|
||
EAL: PCI memory mapped at 0x7f14f6fe5000
|
||
EAL: PCI memory mapped at 0x7f14f67e5000
|
||
EAL: PCI memory mapped at 0x7f15fbd9b000
|
||
EAL: PCI device 0000:84:00.1 on NUMA socket 1
|
||
EAL: probe driver: 14e4:168e rte_bnx2x_pmd
|
||
EAL: PCI memory mapped at 0x7f14f5fe5000
|
||
EAL: PCI memory mapped at 0x7f14f57e5000
|
||
EAL: PCI memory mapped at 0x7f15fbd4f000
|
||
Interactive-mode selected
|
||
Configuring Port 0 (socket 0)
|
||
PMD: bnx2x_dev_tx_queue_setup(): fp[00] req_bd=512, thresh=512,
|
||
usable_bd=1020, total_bd=1024,
|
||
tx_pages=4
|
||
PMD: bnx2x_dev_rx_queue_setup(): fp[00] req_bd=128, thresh=0,
|
||
usable_bd=510, total_bd=512,
|
||
rx_pages=1, cq_pages=8
|
||
PMD: bnx2x_print_adapter_info():
|
||
[...]
|
||
Checking link statuses...
|
||
Port 0 Link Up - speed 10000 Mbps - full-duplex
|
||
Port 1 Link Up - speed 10000 Mbps - full-duplex
|
||
Done
|
||
testpmd>
|