numam-dpdk/app/test/test_kni.c
Stephen Hemminger cb056611a8 eal: rename lcore master and slave
Replace master lcore with main lcore and
replace slave lcore with worker lcore.

Keep the old functions and macros but mark them as deprecated
for this release.

The "--master-lcore" command line option is also deprecated
and any usage will print a warning and use "--main-lcore"
as replacement.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
2020-10-20 13:17:08 +02:00

767 lines
17 KiB
C

/* SPDX-License-Identifier: BSD-3-Clause
* Copyright(c) 2010-2014 Intel Corporation
*/
#include <stdio.h>
#include <stdint.h>
#include <unistd.h>
#include <string.h>
#include <sys/wait.h>
#include <dirent.h>
#include "test.h"
#if !defined(RTE_EXEC_ENV_LINUX) || !defined(RTE_LIB_KNI)
static int
test_kni(void)
{
printf("KNI not supported, skipping test\n");
return TEST_SKIPPED;
}
#else
#include <rte_string_fns.h>
#include <rte_mempool.h>
#include <rte_ethdev.h>
#include <rte_bus_pci.h>
#include <rte_cycles.h>
#include <rte_kni.h>
#define NB_MBUF 8192
#define MAX_PACKET_SZ 2048
#define MBUF_DATA_SZ (MAX_PACKET_SZ + RTE_PKTMBUF_HEADROOM)
#define PKT_BURST_SZ 32
#define MEMPOOL_CACHE_SZ PKT_BURST_SZ
#define SOCKET 0
#define NB_RXD 1024
#define NB_TXD 1024
#define KNI_TIMEOUT_MS 5000 /* ms */
#define IFCONFIG "/sbin/ifconfig "
#define TEST_KNI_PORT "test_kni_port"
#define KNI_MODULE_PATH "/sys/module/rte_kni"
#define KNI_MODULE_PARAM_LO KNI_MODULE_PATH"/parameters/lo_mode"
#define KNI_TEST_MAX_PORTS 4
/* The threshold number of mbufs to be transmitted or received. */
#define KNI_NUM_MBUF_THRESHOLD 100
static int kni_pkt_mtu = 0;
struct test_kni_stats {
volatile uint64_t ingress;
volatile uint64_t egress;
};
static const struct rte_eth_rxconf rx_conf = {
.rx_thresh = {
.pthresh = 8,
.hthresh = 8,
.wthresh = 4,
},
.rx_free_thresh = 0,
};
static const struct rte_eth_txconf tx_conf = {
.tx_thresh = {
.pthresh = 36,
.hthresh = 0,
.wthresh = 0,
},
.tx_free_thresh = 0,
.tx_rs_thresh = 0,
};
static const struct rte_eth_conf port_conf = {
.txmode = {
.mq_mode = ETH_DCB_NONE,
},
};
static struct rte_kni_ops kni_ops = {
.change_mtu = NULL,
.config_network_if = NULL,
.config_mac_address = NULL,
.config_promiscusity = NULL,
};
static unsigned int lcore_main, lcore_ingress, lcore_egress;
static struct rte_kni *test_kni_ctx;
static struct test_kni_stats stats;
static volatile uint32_t test_kni_processing_flag;
static struct rte_mempool *
test_kni_create_mempool(void)
{
struct rte_mempool * mp;
mp = rte_mempool_lookup("kni_mempool");
if (!mp)
mp = rte_pktmbuf_pool_create("kni_mempool",
NB_MBUF,
MEMPOOL_CACHE_SZ, 0, MBUF_DATA_SZ,
SOCKET);
return mp;
}
static struct rte_mempool *
test_kni_lookup_mempool(void)
{
return rte_mempool_lookup("kni_mempool");
}
/* Callback for request of changing MTU */
static int
kni_change_mtu(uint16_t port_id, unsigned int new_mtu)
{
printf("Change MTU of port %d to %u\n", port_id, new_mtu);
kni_pkt_mtu = new_mtu;
printf("Change MTU of port %d to %i successfully.\n",
port_id, kni_pkt_mtu);
return 0;
}
static int
test_kni_link_change(void)
{
int ret;
int pid;
pid = fork();
if (pid < 0) {
printf("Error: Failed to fork a process\n");
return -1;
}
if (pid == 0) {
printf("Starting KNI Link status change tests.\n");
if (system(IFCONFIG TEST_KNI_PORT" up") == -1) {
ret = -1;
goto error;
}
ret = rte_kni_update_link(test_kni_ctx, 1);
if (ret < 0) {
printf("Failed to change link state to Up ret=%d.\n",
ret);
goto error;
}
rte_delay_ms(1000);
printf("KNI: Set LINKUP, previous state=%d\n", ret);
ret = rte_kni_update_link(test_kni_ctx, 0);
if (ret != 1) {
printf(
"Failed! Previous link state should be 1, returned %d.\n",
ret);
goto error;
}
rte_delay_ms(1000);
printf("KNI: Set LINKDOWN, previous state=%d\n", ret);
ret = rte_kni_update_link(test_kni_ctx, 1);
if (ret != 0) {
printf(
"Failed! Previous link state should be 0, returned %d.\n",
ret);
goto error;
}
printf("KNI: Set LINKUP, previous state=%d\n", ret);
ret = 0;
rte_delay_ms(1000);
error:
if (system(IFCONFIG TEST_KNI_PORT" down") == -1)
ret = -1;
printf("KNI: Link status change tests: %s.\n",
(ret == 0) ? "Passed" : "Failed");
exit(ret);
} else {
int p_ret, status;
while (1) {
p_ret = waitpid(pid, &status, WNOHANG);
if (p_ret != 0) {
if (WIFEXITED(status))
return WEXITSTATUS(status);
return -1;
}
rte_delay_ms(10);
rte_kni_handle_request(test_kni_ctx);
}
}
}
/**
* This loop fully tests the basic functions of KNI. e.g. transmitting,
* receiving to, from kernel space, and kernel requests.
*
* This is the loop to transmit/receive mbufs to/from kernel interface with
* supported by KNI kernel module. The ingress lcore will allocate mbufs and
* transmit them to kernel space; while the egress lcore will receive the mbufs
* from kernel space and free them.
* On the main lcore, several commands will be run to check handling the
* kernel requests. And it will finally set the flag to exit the KNI
* transmitting/receiving to/from the kernel space.
*
* Note: To support this testing, the KNI kernel module needs to be insmodded
* in one of its loopback modes.
*/
static int
test_kni_loop(__rte_unused void *arg)
{
int ret = 0;
unsigned nb_rx, nb_tx, num, i;
const unsigned lcore_id = rte_lcore_id();
struct rte_mbuf *pkts_burst[PKT_BURST_SZ];
if (lcore_id == lcore_main) {
rte_delay_ms(KNI_TIMEOUT_MS);
/* tests of handling kernel request */
if (system(IFCONFIG TEST_KNI_PORT" up") == -1)
ret = -1;
if (system(IFCONFIG TEST_KNI_PORT" mtu 1400") == -1)
ret = -1;
if (system(IFCONFIG TEST_KNI_PORT" down") == -1)
ret = -1;
rte_delay_ms(KNI_TIMEOUT_MS);
test_kni_processing_flag = 1;
} else if (lcore_id == lcore_ingress) {
struct rte_mempool *mp = test_kni_lookup_mempool();
if (mp == NULL)
return -1;
while (1) {
if (test_kni_processing_flag)
break;
for (nb_rx = 0; nb_rx < PKT_BURST_SZ; nb_rx++) {
pkts_burst[nb_rx] = rte_pktmbuf_alloc(mp);
if (!pkts_burst[nb_rx])
break;
}
num = rte_kni_tx_burst(test_kni_ctx, pkts_burst,
nb_rx);
stats.ingress += num;
rte_kni_handle_request(test_kni_ctx);
if (num < nb_rx) {
for (i = num; i < nb_rx; i++) {
rte_pktmbuf_free(pkts_burst[i]);
}
}
rte_delay_ms(10);
}
} else if (lcore_id == lcore_egress) {
while (1) {
if (test_kni_processing_flag)
break;
num = rte_kni_rx_burst(test_kni_ctx, pkts_burst,
PKT_BURST_SZ);
stats.egress += num;
for (nb_tx = 0; nb_tx < num; nb_tx++)
rte_pktmbuf_free(pkts_burst[nb_tx]);
rte_delay_ms(10);
}
}
return ret;
}
static int
test_kni_allocate_lcores(void)
{
unsigned i, count = 0;
lcore_main = rte_get_main_lcore();
printf("main lcore: %u\n", lcore_main);
for (i = 0; i < RTE_MAX_LCORE; i++) {
if (count >=2 )
break;
if (rte_lcore_is_enabled(i) && i != lcore_main) {
count ++;
if (count == 1)
lcore_ingress = i;
else if (count == 2)
lcore_egress = i;
}
}
printf("count: %u\n", count);
return count == 2 ? 0 : -1;
}
static int
test_kni_register_handler_mp(void)
{
#define TEST_KNI_HANDLE_REQ_COUNT 10 /* 5s */
#define TEST_KNI_HANDLE_REQ_INTERVAL 500 /* ms */
#define TEST_KNI_MTU 1450
#define TEST_KNI_MTU_STR " 1450"
int pid;
pid = fork();
if (pid < 0) {
printf("Failed to fork a process\n");
return -1;
} else if (pid == 0) {
int i;
struct rte_kni *kni = rte_kni_get(TEST_KNI_PORT);
struct rte_kni_ops ops = {
.change_mtu = kni_change_mtu,
.config_network_if = NULL,
.config_mac_address = NULL,
.config_promiscusity = NULL,
};
if (!kni) {
printf("Failed to get KNI named %s\n", TEST_KNI_PORT);
exit(-1);
}
kni_pkt_mtu = 0;
/* Check with the invalid parameters */
if (rte_kni_register_handlers(kni, NULL) == 0) {
printf("Unexpectedly register successuflly "
"with NULL ops pointer\n");
exit(-1);
}
if (rte_kni_register_handlers(NULL, &ops) == 0) {
printf("Unexpectedly register successfully "
"to NULL KNI device pointer\n");
exit(-1);
}
if (rte_kni_register_handlers(kni, &ops)) {
printf("Fail to register ops\n");
exit(-1);
}
/* Check registering again after it has been registered */
if (rte_kni_register_handlers(kni, &ops) == 0) {
printf("Unexpectedly register successfully after "
"it has already been registered\n");
exit(-1);
}
/**
* Handle the request of setting MTU,
* with registered handlers.
*/
for (i = 0; i < TEST_KNI_HANDLE_REQ_COUNT; i++) {
rte_kni_handle_request(kni);
if (kni_pkt_mtu == TEST_KNI_MTU)
break;
rte_delay_ms(TEST_KNI_HANDLE_REQ_INTERVAL);
}
if (i >= TEST_KNI_HANDLE_REQ_COUNT) {
printf("MTU has not been set\n");
exit(-1);
}
kni_pkt_mtu = 0;
if (rte_kni_unregister_handlers(kni) < 0) {
printf("Fail to unregister ops\n");
exit(-1);
}
/* Check with invalid parameter */
if (rte_kni_unregister_handlers(NULL) == 0) {
exit(-1);
}
/**
* Handle the request of setting MTU,
* without registered handlers.
*/
for (i = 0; i < TEST_KNI_HANDLE_REQ_COUNT; i++) {
rte_kni_handle_request(kni);
if (kni_pkt_mtu != 0)
break;
rte_delay_ms(TEST_KNI_HANDLE_REQ_INTERVAL);
}
if (kni_pkt_mtu != 0) {
printf("MTU shouldn't be set\n");
exit(-1);
}
exit(0);
} else {
int p_ret, status;
rte_delay_ms(1000);
if (system(IFCONFIG TEST_KNI_PORT " mtu" TEST_KNI_MTU_STR)
== -1)
return -1;
rte_delay_ms(1000);
if (system(IFCONFIG TEST_KNI_PORT " mtu" TEST_KNI_MTU_STR)
== -1)
return -1;
p_ret = wait(&status);
if (!WIFEXITED(status)) {
printf("Child process (%d) exit abnormally\n", p_ret);
return -1;
}
if (WEXITSTATUS(status) != 0) {
printf("Child process exit with failure\n");
return -1;
}
}
return 0;
}
static int
test_kni_processing(uint16_t port_id, struct rte_mempool *mp)
{
int ret = 0;
unsigned i;
struct rte_kni *kni;
struct rte_kni_conf conf;
struct rte_eth_dev_info info;
struct rte_kni_ops ops;
const struct rte_pci_device *pci_dev;
const struct rte_bus *bus = NULL;
if (!mp)
return -1;
memset(&conf, 0, sizeof(conf));
memset(&info, 0, sizeof(info));
memset(&ops, 0, sizeof(ops));
ret = rte_eth_dev_info_get(port_id, &info);
if (ret != 0) {
printf("Error during getting device (port %u) info: %s\n",
port_id, strerror(-ret));
return -1;
}
if (info.device)
bus = rte_bus_find_by_device(info.device);
if (bus && !strcmp(bus->name, "pci")) {
pci_dev = RTE_DEV_TO_PCI(info.device);
conf.addr = pci_dev->addr;
conf.id = pci_dev->id;
}
snprintf(conf.name, sizeof(conf.name), TEST_KNI_PORT);
/* core id 1 configured for kernel thread */
conf.core_id = 1;
conf.force_bind = 1;
conf.mbuf_size = MAX_PACKET_SZ;
conf.group_id = port_id;
ops = kni_ops;
ops.port_id = port_id;
/* basic test of kni processing */
kni = rte_kni_alloc(mp, &conf, &ops);
if (!kni) {
printf("fail to create kni\n");
return -1;
}
test_kni_ctx = kni;
test_kni_processing_flag = 0;
stats.ingress = 0;
stats.egress = 0;
/**
* Check multiple processes support on
* registerring/unregisterring handlers.
*/
if (test_kni_register_handler_mp() < 0) {
printf("fail to check multiple process support\n");
ret = -1;
goto fail_kni;
}
ret = test_kni_link_change();
if (ret != 0)
goto fail_kni;
rte_eal_mp_remote_launch(test_kni_loop, NULL, CALL_MAIN);
RTE_LCORE_FOREACH_WORKER(i) {
if (rte_eal_wait_lcore(i) < 0) {
ret = -1;
goto fail_kni;
}
}
/**
* Check if the number of mbufs received from kernel space is equal
* to that of transmitted to kernel space
*/
if (stats.ingress < KNI_NUM_MBUF_THRESHOLD ||
stats.egress < KNI_NUM_MBUF_THRESHOLD) {
printf("The ingress/egress number should not be "
"less than %u\n", (unsigned)KNI_NUM_MBUF_THRESHOLD);
ret = -1;
goto fail_kni;
}
if (rte_kni_release(kni) < 0) {
printf("fail to release kni\n");
return -1;
}
test_kni_ctx = NULL;
/* test of reusing memzone */
kni = rte_kni_alloc(mp, &conf, &ops);
if (!kni) {
printf("fail to create kni\n");
return -1;
}
/* Release the kni for following testing */
if (rte_kni_release(kni) < 0) {
printf("fail to release kni\n");
return -1;
}
return ret;
fail_kni:
if (rte_kni_release(kni) < 0) {
printf("fail to release kni\n");
ret = -1;
}
return ret;
}
static int
test_kni(void)
{
int ret = -1;
uint16_t port_id;
struct rte_kni *kni;
struct rte_mempool *mp;
struct rte_kni_conf conf;
struct rte_eth_dev_info info;
struct rte_kni_ops ops;
const struct rte_pci_device *pci_dev;
const struct rte_bus *bus;
FILE *fd;
DIR *dir;
char buf[16];
dir = opendir(KNI_MODULE_PATH);
if (!dir) {
if (errno == ENOENT) {
printf("Cannot run UT due to missing rte_kni module\n");
return TEST_SKIPPED;
}
printf("opendir: %s", strerror(errno));
return -1;
}
closedir(dir);
/* Initialize KNI subsytem */
rte_kni_init(KNI_TEST_MAX_PORTS);
if (test_kni_allocate_lcores() < 0) {
printf("No enough lcores for kni processing\n");
return -1;
}
mp = test_kni_create_mempool();
if (!mp) {
printf("fail to create mempool for kni\n");
return -1;
}
/* configuring port 0 for the test is enough */
port_id = 0;
ret = rte_eth_dev_configure(port_id, 1, 1, &port_conf);
if (ret < 0) {
printf("fail to configure port %d\n", port_id);
return -1;
}
ret = rte_eth_rx_queue_setup(port_id, 0, NB_RXD, SOCKET, &rx_conf, mp);
if (ret < 0) {
printf("fail to setup rx queue for port %d\n", port_id);
return -1;
}
ret = rte_eth_tx_queue_setup(port_id, 0, NB_TXD, SOCKET, &tx_conf);
if (ret < 0) {
printf("fail to setup tx queue for port %d\n", port_id);
return -1;
}
ret = rte_eth_dev_start(port_id);
if (ret < 0) {
printf("fail to start port %d\n", port_id);
return -1;
}
ret = rte_eth_promiscuous_enable(port_id);
if (ret != 0) {
printf("fail to enable promiscuous mode for port %d: %s\n",
port_id, rte_strerror(-ret));
return -1;
}
/* basic test of kni processing */
fd = fopen(KNI_MODULE_PARAM_LO, "r");
if (fd == NULL) {
printf("fopen: %s", strerror(errno));
return -1;
}
memset(&buf, 0, sizeof(buf));
if (fgets(buf, sizeof(buf), fd)) {
if (!strncmp(buf, "lo_mode_fifo", strlen("lo_mode_fifo")) ||
!strncmp(buf, "lo_mode_fifo_skb",
strlen("lo_mode_fifo_skb"))) {
ret = test_kni_processing(port_id, mp);
if (ret < 0) {
fclose(fd);
goto fail;
}
} else
printf("test_kni_processing skipped because of missing rte_kni module lo_mode argument\n");
}
fclose(fd);
/* test of allocating KNI with NULL mempool pointer */
memset(&info, 0, sizeof(info));
memset(&conf, 0, sizeof(conf));
memset(&ops, 0, sizeof(ops));
ret = rte_eth_dev_info_get(port_id, &info);
if (ret != 0) {
printf("Error during getting device (port %u) info: %s\n",
port_id, strerror(-ret));
return -1;
}
if (info.device)
bus = rte_bus_find_by_device(info.device);
else
bus = NULL;
if (bus && !strcmp(bus->name, "pci")) {
pci_dev = RTE_DEV_TO_PCI(info.device);
conf.addr = pci_dev->addr;
conf.id = pci_dev->id;
}
conf.group_id = port_id;
conf.mbuf_size = MAX_PACKET_SZ;
ops = kni_ops;
ops.port_id = port_id;
kni = rte_kni_alloc(NULL, &conf, &ops);
if (kni) {
ret = -1;
printf("unexpectedly creates kni successfully with NULL "
"mempool pointer\n");
goto fail;
}
/* test of allocating KNI without configurations */
kni = rte_kni_alloc(mp, NULL, NULL);
if (kni) {
ret = -1;
printf("Unexpectedly allocate KNI device successfully "
"without configurations\n");
goto fail;
}
/* test of allocating KNI without a name */
memset(&conf, 0, sizeof(conf));
memset(&info, 0, sizeof(info));
memset(&ops, 0, sizeof(ops));
ret = rte_eth_dev_info_get(port_id, &info);
if (ret != 0) {
printf("Error during getting device (port %u) info: %s\n",
port_id, strerror(-ret));
ret = -1;
goto fail;
}
if (info.device)
bus = rte_bus_find_by_device(info.device);
else
bus = NULL;
if (bus && !strcmp(bus->name, "pci")) {
pci_dev = RTE_DEV_TO_PCI(info.device);
conf.addr = pci_dev->addr;
conf.id = pci_dev->id;
}
conf.group_id = port_id;
conf.mbuf_size = MAX_PACKET_SZ;
ops = kni_ops;
ops.port_id = port_id;
kni = rte_kni_alloc(mp, &conf, &ops);
if (kni) {
ret = -1;
printf("Unexpectedly allocate a KNI device successfully "
"without a name\n");
goto fail;
}
/* test of releasing NULL kni context */
ret = rte_kni_release(NULL);
if (ret == 0) {
ret = -1;
printf("unexpectedly release kni successfully\n");
goto fail;
}
/* test of handling request on NULL device pointer */
ret = rte_kni_handle_request(NULL);
if (ret == 0) {
ret = -1;
printf("Unexpectedly handle request on NULL device pointer\n");
goto fail;
}
/* test of getting KNI device with pointer to NULL */
kni = rte_kni_get(NULL);
if (kni) {
ret = -1;
printf("Unexpectedly get a KNI device with "
"NULL name pointer\n");
goto fail;
}
/* test of getting KNI device with an zero length name string */
memset(&conf, 0, sizeof(conf));
kni = rte_kni_get(conf.name);
if (kni) {
ret = -1;
printf("Unexpectedly get a KNI device with "
"zero length name string\n");
goto fail;
}
/* test of getting KNI device with an invalid string name */
memset(&conf, 0, sizeof(conf));
snprintf(conf.name, sizeof(conf.name), "testing");
kni = rte_kni_get(conf.name);
if (kni) {
ret = -1;
printf("Unexpectedly get a KNI device with "
"a never used name string\n");
goto fail;
}
ret = 0;
fail:
if (rte_eth_dev_stop(port_id) != 0)
printf("Failed to stop port %u\n", port_id);
return ret;
}
#endif
REGISTER_TEST_COMMAND(kni_autotest, test_kni);