numam-dpdk/drivers/net/cxgbe/mps_tcam.h
Olivier Matz 35b2d13fd6 net: add rte prefix to ether defines
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.

Do not update the command line library to avoid adding a dependency to
librte_net.

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
2019-05-24 13:34:45 +02:00

53 lines
1.3 KiB
C

/* SPDX-License-Identifier: BSD-3-Clause
* Copyright(c) 2018 Chelsio Communications.
* All rights reserved.
*/
#ifndef _CXGBE_MPSTCAM_H_
#define _CXGBE_MPSTCAM_H_
#include "base/common.h"
enum {
MPS_ENTRY_UNUSED, /* Keep this first so memset 0 renders
* the correct state. Other states can
* be added in future like MPS_ENTRY_BUSY
* to reduce contention while mboxing
* the request to f/w or to denote attributes
* for a specific entry
*/
MPS_ENTRY_USED,
};
struct mps_tcam_entry {
u8 state;
u16 idx;
/* add data here which uniquely defines an entry */
u8 eth_addr[RTE_ETHER_ADDR_LEN];
u8 mask[RTE_ETHER_ADDR_LEN];
struct mpstcam_table *mpstcam; /* backptr */
rte_atomic32_t refcnt;
};
struct mpstcam_table {
u16 size;
rte_rwlock_t lock;
u16 free_idx; /* next free index */
bool full; /* since free index can be present
* anywhere in the table, size and
* free_idx cannot alone determine
* if the table is full
*/
struct mps_tcam_entry entry[0];
};
struct mpstcam_table *t4_init_mpstcam(struct adapter *adap);
void t4_cleanup_mpstcam(struct adapter *adap);
int cxgbe_mpstcam_alloc(struct port_info *pi, const u8 *mac, const u8 *mask);
int cxgbe_mpstcam_remove(struct port_info *pi, u16 idx);
int cxgbe_mpstcam_modify(struct port_info *pi, int idx, const u8 *addr);
#endif /* _CXGBE_MPSTCAM_H_ */