baa949306d
The legacy filter API will be superseded by rte_flow. There are also several small features which can not be implemented in rte_flow. This patch re-implemented these features as private API. Two APIs are added: rte_pmd_ixgbe_get_fdir_info. rte_pmd_ixgbe_get_fdir_stats. Signed-off-by: Chenxu Di <chenxux.di@intel.com> Acked-by: Jeff Guo <jia.guo@intel.com>
763 lines
20 KiB
C
763 lines
20 KiB
C
/* SPDX-License-Identifier: BSD-3-Clause
|
|
* Copyright(c) 2016 Intel Corporation
|
|
*/
|
|
|
|
/**
|
|
* @file rte_pmd_ixgbe.h
|
|
* ixgbe PMD specific functions.
|
|
*
|
|
**/
|
|
|
|
#ifndef _PMD_IXGBE_H_
|
|
#define _PMD_IXGBE_H_
|
|
|
|
#include <rte_ethdev_driver.h>
|
|
|
|
/**
|
|
* Notify VF when PF link status changes.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param vf
|
|
* VF id.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-EINVAL) if *vf* invalid.
|
|
*/
|
|
int rte_pmd_ixgbe_ping_vf(uint16_t port, uint16_t vf);
|
|
|
|
/**
|
|
* Set the VF MAC address.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param vf
|
|
* VF id.
|
|
* @param mac_addr
|
|
* VF MAC address.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-EINVAL) if *vf* or *mac_addr* is invalid.
|
|
*/
|
|
int rte_pmd_ixgbe_set_vf_mac_addr(uint16_t port, uint16_t vf,
|
|
struct rte_ether_addr *mac_addr);
|
|
|
|
/**
|
|
* Enable/Disable VF VLAN anti spoofing.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param vf
|
|
* VF on which to set VLAN anti spoofing.
|
|
* @param on
|
|
* 1 - Enable VFs VLAN anti spoofing.
|
|
* 0 - Disable VFs VLAN anti spoofing.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_pmd_ixgbe_set_vf_vlan_anti_spoof(uint16_t port, uint16_t vf,
|
|
uint8_t on);
|
|
|
|
/**
|
|
* Enable/Disable VF MAC anti spoofing.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param vf
|
|
* VF on which to set MAC anti spoofing.
|
|
* @param on
|
|
* 1 - Enable VFs MAC anti spoofing.
|
|
* 0 - Disable VFs MAC anti spoofing.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_pmd_ixgbe_set_vf_mac_anti_spoof(uint16_t port, uint16_t vf, uint8_t on);
|
|
|
|
/**
|
|
* Enable/Disable vf vlan insert
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param vf
|
|
* ID specifying VF.
|
|
* @param vlan_id
|
|
* 0 - Disable VF's vlan insert.
|
|
* n - Enable; n is inserted as the vlan id.
|
|
*
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_pmd_ixgbe_set_vf_vlan_insert(uint16_t port, uint16_t vf,
|
|
uint16_t vlan_id);
|
|
|
|
/**
|
|
* Enable/Disable tx loopback
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param on
|
|
* 1 - Enable tx loopback.
|
|
* 0 - Disable tx loopback.
|
|
*
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_pmd_ixgbe_set_tx_loopback(uint16_t port, uint8_t on);
|
|
|
|
/**
|
|
* set all queues drop enable bit
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param on
|
|
* 1 - set the queue drop enable bit for all pools.
|
|
* 0 - reset the queue drop enable bit for all pools.
|
|
*
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_pmd_ixgbe_set_all_queues_drop_en(uint16_t port, uint8_t on);
|
|
|
|
/**
|
|
* set drop enable bit in the VF split rx control register
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param vf
|
|
* ID specifying VF.
|
|
* @param on
|
|
* 1 - set the drop enable bit in the split rx control register.
|
|
* 0 - reset the drop enable bit in the split rx control register.
|
|
*
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
|
|
int rte_pmd_ixgbe_set_vf_split_drop_en(uint16_t port, uint16_t vf, uint8_t on);
|
|
|
|
/**
|
|
* Enable/Disable vf vlan strip for all queues in a pool
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param vf
|
|
* ID specifying VF.
|
|
* @param on
|
|
* 1 - Enable VF's vlan strip on RX queues.
|
|
* 0 - Disable VF's vlan strip on RX queues.
|
|
*
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support this feature.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int
|
|
rte_pmd_ixgbe_set_vf_vlan_stripq(uint16_t port, uint16_t vf, uint8_t on);
|
|
|
|
/**
|
|
* Enable MACsec offload.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param en
|
|
* 1 - Enable encryption (encrypt and add integrity signature).
|
|
* 0 - Disable encryption (only add integrity signature).
|
|
* @param rp
|
|
* 1 - Enable replay protection.
|
|
* 0 - Disable replay protection.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-ENOTSUP) if hardware doesn't support this feature.
|
|
*/
|
|
int rte_pmd_ixgbe_macsec_enable(uint16_t port, uint8_t en, uint8_t rp);
|
|
|
|
/**
|
|
* Disable MACsec offload.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-ENOTSUP) if hardware doesn't support this feature.
|
|
*/
|
|
int rte_pmd_ixgbe_macsec_disable(uint16_t port);
|
|
|
|
/**
|
|
* Configure Tx SC (Secure Connection).
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param mac
|
|
* The MAC address on the local side.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-ENOTSUP) if hardware doesn't support this feature.
|
|
*/
|
|
int rte_pmd_ixgbe_macsec_config_txsc(uint16_t port, uint8_t *mac);
|
|
|
|
/**
|
|
* Configure Rx SC (Secure Connection).
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param mac
|
|
* The MAC address on the remote side.
|
|
* @param pi
|
|
* The PI (port identifier) on the remote side.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-ENOTSUP) if hardware doesn't support this feature.
|
|
*/
|
|
int rte_pmd_ixgbe_macsec_config_rxsc(uint16_t port, uint8_t *mac, uint16_t pi);
|
|
|
|
/**
|
|
* Enable Tx SA (Secure Association).
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param idx
|
|
* The SA to be enabled (0 or 1).
|
|
* @param an
|
|
* The association number on the local side.
|
|
* @param pn
|
|
* The packet number on the local side.
|
|
* @param key
|
|
* The key on the local side.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-ENOTSUP) if hardware doesn't support this feature.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_pmd_ixgbe_macsec_select_txsa(uint16_t port, uint8_t idx, uint8_t an,
|
|
uint32_t pn, uint8_t *key);
|
|
|
|
/**
|
|
* Enable Rx SA (Secure Association).
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param idx
|
|
* The SA to be enabled (0 or 1)
|
|
* @param an
|
|
* The association number on the remote side.
|
|
* @param pn
|
|
* The packet number on the remote side.
|
|
* @param key
|
|
* The key on the remote side.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-ENOTSUP) if hardware doesn't support this feature.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_pmd_ixgbe_macsec_select_rxsa(uint16_t port, uint8_t idx, uint8_t an,
|
|
uint32_t pn, uint8_t *key);
|
|
|
|
/**
|
|
* Set RX L2 Filtering mode of a VF of an Ethernet device.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param vf
|
|
* VF id.
|
|
* @param rx_mask
|
|
* The RX mode mask, which is one or more of accepting Untagged Packets,
|
|
* packets that match the PFUTA table, Broadcast and Multicast Promiscuous.
|
|
* ETH_VMDQ_ACCEPT_UNTAG,ETH_VMDQ_ACCEPT_HASH_UC,
|
|
* ETH_VMDQ_ACCEPT_BROADCAST and ETH_VMDQ_ACCEPT_MULTICAST will be used
|
|
* in rx_mode.
|
|
* @param on
|
|
* 1 - Enable a VF RX mode.
|
|
* 0 - Disable a VF RX mode.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int
|
|
rte_pmd_ixgbe_set_vf_rxmode(uint16_t port, uint16_t vf, uint16_t rx_mask,
|
|
uint8_t on);
|
|
|
|
/**
|
|
* Enable or disable a VF traffic receive of an Ethernet device.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param vf
|
|
* VF id.
|
|
* @param on
|
|
* 1 - Enable a VF traffic receive.
|
|
* 0 - Disable a VF traffic receive.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int
|
|
rte_pmd_ixgbe_set_vf_rx(uint16_t port, uint16_t vf, uint8_t on);
|
|
|
|
/**
|
|
* Enable or disable a VF traffic transmit of the Ethernet device.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param vf
|
|
* VF id.
|
|
* @param on
|
|
* 1 - Enable a VF traffic transmit.
|
|
* 0 - Disable a VF traffic transmit.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int
|
|
rte_pmd_ixgbe_set_vf_tx(uint16_t port, uint16_t vf, uint8_t on);
|
|
|
|
/**
|
|
* Enable/Disable hardware VF VLAN filtering by an Ethernet device of
|
|
* received VLAN packets tagged with a given VLAN Tag Identifier.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param vlan
|
|
* The VLAN Tag Identifier whose filtering must be enabled or disabled.
|
|
* @param vf_mask
|
|
* Bitmap listing which VFs participate in the VLAN filtering.
|
|
* @param vlan_on
|
|
* 1 - Enable VFs VLAN filtering.
|
|
* 0 - Disable VFs VLAN filtering.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int
|
|
rte_pmd_ixgbe_set_vf_vlan_filter(uint16_t port, uint16_t vlan,
|
|
uint64_t vf_mask, uint8_t vlan_on);
|
|
|
|
/**
|
|
* Set the rate limitation for a vf on an Ethernet device.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param vf
|
|
* VF id.
|
|
* @param tx_rate
|
|
* The tx rate allocated from the total link speed for this VF id.
|
|
* @param q_msk
|
|
* The queue mask which need to set the rate.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support this feature.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_pmd_ixgbe_set_vf_rate_limit(uint16_t port, uint16_t vf,
|
|
uint16_t tx_rate, uint64_t q_msk);
|
|
|
|
/**
|
|
* Set all the TCs' bandwidth weight.
|
|
*
|
|
* The bw_weight means the percentage occupied by the TC.
|
|
* It can be taken as the relative min bandwidth setting.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param tc_num
|
|
* Number of TCs.
|
|
* @param bw_weight
|
|
* An array of relative bandwidth weight for all the TCs.
|
|
* The summary of the bw_weight should be 100.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-EINVAL) if bad parameter.
|
|
* - (-ENOTSUP) not supported by firmware.
|
|
*/
|
|
int rte_pmd_ixgbe_set_tc_bw_alloc(uint16_t port,
|
|
uint8_t tc_num,
|
|
uint8_t *bw_weight);
|
|
|
|
|
|
/**
|
|
* Initialize bypass logic. This function needs to be called before
|
|
* executing any other bypass API.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_pmd_ixgbe_bypass_init(uint16_t port);
|
|
|
|
/**
|
|
* Return bypass state.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param state
|
|
* The return bypass state.
|
|
* - (1) Normal mode
|
|
* - (2) Bypass mode
|
|
* - (3) Isolate mode
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_pmd_ixgbe_bypass_state_show(uint16_t port, uint32_t *state);
|
|
|
|
/**
|
|
* Set bypass state
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param new_state
|
|
* The current bypass state.
|
|
* - (1) Normal mode
|
|
* - (2) Bypass mode
|
|
* - (3) Isolate mode
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_pmd_ixgbe_bypass_state_set(uint16_t port, uint32_t *new_state);
|
|
|
|
/**
|
|
* Return bypass state when given event occurs.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param event
|
|
* The bypass event
|
|
* - (1) Main power on (power button is pushed)
|
|
* - (2) Auxiliary power on (power supply is being plugged)
|
|
* - (3) Main power off (system shutdown and power supply is left plugged in)
|
|
* - (4) Auxiliary power off (power supply is being unplugged)
|
|
* - (5) Display or set the watchdog timer
|
|
* @param state
|
|
* The bypass state when given event occurred.
|
|
* - (1) Normal mode
|
|
* - (2) Bypass mode
|
|
* - (3) Isolate mode
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_pmd_ixgbe_bypass_event_show(uint16_t port,
|
|
uint32_t event,
|
|
uint32_t *state);
|
|
|
|
/**
|
|
* Set bypass state when given event occurs.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param event
|
|
* The bypass event
|
|
* - (1) Main power on (power button is pushed)
|
|
* - (2) Auxiliary power on (power supply is being plugged)
|
|
* - (3) Main power off (system shutdown and power supply is left plugged in)
|
|
* - (4) Auxiliary power off (power supply is being unplugged)
|
|
* - (5) Display or set the watchdog timer
|
|
* @param state
|
|
* The assigned state when given event occurs.
|
|
* - (1) Normal mode
|
|
* - (2) Bypass mode
|
|
* - (3) Isolate mode
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_pmd_ixgbe_bypass_event_store(uint16_t port,
|
|
uint32_t event,
|
|
uint32_t state);
|
|
|
|
/**
|
|
* Set bypass watchdog timeout count.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param timeout
|
|
* The timeout to be set.
|
|
* - (0) 0 seconds (timer is off)
|
|
* - (1) 1.5 seconds
|
|
* - (2) 2 seconds
|
|
* - (3) 3 seconds
|
|
* - (4) 4 seconds
|
|
* - (5) 8 seconds
|
|
* - (6) 16 seconds
|
|
* - (7) 32 seconds
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_pmd_ixgbe_bypass_wd_timeout_store(uint16_t port, uint32_t timeout);
|
|
|
|
/**
|
|
* Get bypass firmware version.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param ver
|
|
* The firmware version
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_pmd_ixgbe_bypass_ver_show(uint16_t port, uint32_t *ver);
|
|
|
|
/**
|
|
* Return bypass watchdog timeout in seconds
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param wd_timeout
|
|
* The return watchdog timeout. "0" represents timer expired
|
|
* - (0) 0 seconds (timer is off)
|
|
* - (1) 1.5 seconds
|
|
* - (2) 2 seconds
|
|
* - (3) 3 seconds
|
|
* - (4) 4 seconds
|
|
* - (5) 8 seconds
|
|
* - (6) 16 seconds
|
|
* - (7) 32 seconds
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_pmd_ixgbe_bypass_wd_timeout_show(uint16_t port, uint32_t *wd_timeout);
|
|
|
|
/**
|
|
* Reset bypass watchdog timer
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_pmd_ixgbe_bypass_wd_reset(uint16_t port);
|
|
|
|
/**
|
|
* Acquire swfw semaphore lock for MDIO access
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (IXGBE_ERR_SWFW_SYNC) If sw/fw semaphore acquisition failed
|
|
*/
|
|
__rte_experimental
|
|
int
|
|
rte_pmd_ixgbe_mdio_lock(uint16_t port);
|
|
|
|
/**
|
|
* Release swfw semaphore lock used for MDIO access
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-ENODEV) if *port* invalid.
|
|
*/
|
|
__rte_experimental
|
|
int
|
|
rte_pmd_ixgbe_mdio_unlock(uint16_t port);
|
|
|
|
/**
|
|
* Read PHY register using MDIO without MDIO lock
|
|
* The lock must be taken separately before calling this
|
|
* API
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param reg_addr
|
|
* 32 bit PHY Register
|
|
* @param dev_type
|
|
* Used to define device base address
|
|
* @param phy_data
|
|
* Pointer for reading PHY register data
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (IXGBE_ERR_PHY) If PHY read command failed
|
|
*/
|
|
__rte_experimental
|
|
int
|
|
rte_pmd_ixgbe_mdio_unlocked_read(uint16_t port, uint32_t reg_addr,
|
|
uint32_t dev_type, uint16_t *phy_data);
|
|
|
|
/**
|
|
* Write data to PHY register using without MDIO lock
|
|
* The lock must be taken separately before calling this
|
|
* API
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param reg_addr
|
|
* 32 bit PHY Register
|
|
* @param dev_type
|
|
* Used to define device base address
|
|
* @param phy_data
|
|
* Data to write to PHY register
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (IXGBE_ERR_PHY) If PHY read command failed
|
|
*/
|
|
__rte_experimental
|
|
int
|
|
rte_pmd_ixgbe_mdio_unlocked_write(uint16_t port, uint32_t reg_addr,
|
|
uint32_t dev_type, uint16_t phy_data);
|
|
|
|
/**
|
|
* Response sent back to ixgbe driver from user app after callback
|
|
*/
|
|
enum rte_pmd_ixgbe_mb_event_rsp {
|
|
RTE_PMD_IXGBE_MB_EVENT_NOOP_ACK, /**< skip mbox request and ACK */
|
|
RTE_PMD_IXGBE_MB_EVENT_NOOP_NACK, /**< skip mbox request and NACK */
|
|
RTE_PMD_IXGBE_MB_EVENT_PROCEED, /**< proceed with mbox request */
|
|
RTE_PMD_IXGBE_MB_EVENT_MAX /**< max value of this enum */
|
|
};
|
|
|
|
/**
|
|
* Data sent to the user application when the callback is executed.
|
|
*/
|
|
struct rte_pmd_ixgbe_mb_event_param {
|
|
uint16_t vfid; /**< Virtual Function number */
|
|
uint16_t msg_type; /**< VF to PF message type, defined in ixgbe_mbx.h */
|
|
uint16_t retval; /**< return value */
|
|
void *msg; /**< pointer to message */
|
|
};
|
|
enum {
|
|
RTE_PMD_IXGBE_BYPASS_MODE_NONE,
|
|
RTE_PMD_IXGBE_BYPASS_MODE_NORMAL,
|
|
RTE_PMD_IXGBE_BYPASS_MODE_BYPASS,
|
|
RTE_PMD_IXGBE_BYPASS_MODE_ISOLATE,
|
|
RTE_PMD_IXGBE_BYPASS_MODE_NUM,
|
|
};
|
|
|
|
#define RTE_PMD_IXGBE_BYPASS_MODE_VALID(x) \
|
|
((x) > RTE_PMD_IXGBE_BYPASS_MODE_NONE && \
|
|
(x) < RTE_PMD_IXGBE_BYPASS_MODE_NUM)
|
|
|
|
enum {
|
|
RTE_PMD_IXGBE_BYPASS_EVENT_NONE,
|
|
RTE_PMD_IXGBE_BYPASS_EVENT_START,
|
|
RTE_PMD_IXGBE_BYPASS_EVENT_OS_ON = RTE_PMD_IXGBE_BYPASS_EVENT_START,
|
|
RTE_PMD_IXGBE_BYPASS_EVENT_POWER_ON,
|
|
RTE_PMD_IXGBE_BYPASS_EVENT_OS_OFF,
|
|
RTE_PMD_IXGBE_BYPASS_EVENT_POWER_OFF,
|
|
RTE_PMD_IXGBE_BYPASS_EVENT_TIMEOUT,
|
|
RTE_PMD_IXGBE_BYPASS_EVENT_NUM
|
|
};
|
|
|
|
#define RTE_PMD_IXGBE_BYPASS_EVENT_VALID(x) \
|
|
((x) > RTE_PMD_IXGBE_BYPASS_EVENT_NONE && \
|
|
(x) < RTE_PMD_IXGBE_BYPASS_MODE_NUM)
|
|
|
|
enum {
|
|
RTE_PMD_IXGBE_BYPASS_TMT_OFF, /* timeout disabled. */
|
|
RTE_PMD_IXGBE_BYPASS_TMT_1_5_SEC, /* timeout for 1.5 seconds */
|
|
RTE_PMD_IXGBE_BYPASS_TMT_2_SEC, /* timeout for 2 seconds */
|
|
RTE_PMD_IXGBE_BYPASS_TMT_3_SEC, /* timeout for 3 seconds */
|
|
RTE_PMD_IXGBE_BYPASS_TMT_4_SEC, /* timeout for 4 seconds */
|
|
RTE_PMD_IXGBE_BYPASS_TMT_8_SEC, /* timeout for 8 seconds */
|
|
RTE_PMD_IXGBE_BYPASS_TMT_16_SEC, /* timeout for 16 seconds */
|
|
RTE_PMD_IXGBE_BYPASS_TMT_32_SEC, /* timeout for 32 seconds */
|
|
RTE_PMD_IXGBE_BYPASS_TMT_NUM
|
|
};
|
|
|
|
#define RTE_PMD_IXGBE_BYPASS_TMT_VALID(x) \
|
|
((x) == RTE_PMD_IXGBE_BYPASS_TMT_OFF || \
|
|
((x) > RTE_PMD_IXGBE_BYPASS_TMT_OFF && \
|
|
(x) < RTE_PMD_IXGBE_BYPASS_TMT_NUM))
|
|
|
|
/**
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param enable
|
|
* 0 to disable and nonzero to enable 'SBP' bit in FCTRL register
|
|
* to receive all packets
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-ENOTSUP) if hardware doesn't support this feature.
|
|
*/
|
|
__rte_experimental
|
|
int
|
|
rte_pmd_ixgbe_upd_fctrl_sbp(uint16_t port, int enable);
|
|
|
|
/**
|
|
* Get port fdir info
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param fdir_info
|
|
* The fdir info of the port
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-ENOTSUP) if operation not supported.
|
|
*/
|
|
__rte_experimental
|
|
int
|
|
rte_pmd_ixgbe_get_fdir_info(uint16_t port, struct rte_eth_fdir_info *fdir_info);
|
|
|
|
/**
|
|
* Get port fdir status
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param fdir_stats
|
|
* The fdir status of the port
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-ENOTSUP) if operation not supported.
|
|
*/
|
|
__rte_experimental
|
|
int
|
|
rte_pmd_ixgbe_get_fdir_stats(uint16_t port,
|
|
struct rte_eth_fdir_stats *fdir_stats);
|
|
#endif /* _PMD_IXGBE_H_ */
|