numam-dpdk/drivers/net/octeontx2/otx2_ptp.c
Harman Kalra 35867a370f net/octeontx2: fix PTP configurations for VF
Issue has been observed if PTP is already enabled on PF and
later VFs are configured. Since PTP requires mbuf data off
to be shifted by 8 bytes, due to this l3fwd/l2fwd was not
working with VFs.
Also some extra garbage bytes were observed in packet data
when ptp was enabled.

Fixes: b5dc314044 ("net/octeontx2: support base PTP")
Cc: stable@dpdk.org

Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
2019-11-20 17:36:05 +01:00

438 lines
11 KiB
C

/* SPDX-License-Identifier: BSD-3-Clause
* Copyright(C) 2019 Marvell International Ltd.
*/
#include <rte_ethdev_driver.h>
#include "otx2_ethdev.h"
#define PTP_FREQ_ADJUST (1 << 9)
/* Function to enable ptp config for VFs */
void
otx2_nix_ptp_enable_vf(struct rte_eth_dev *eth_dev)
{
struct otx2_eth_dev *dev = otx2_eth_pmd_priv(eth_dev);
if (otx2_nix_recalc_mtu(eth_dev))
otx2_err("Failed to set MTU size for ptp");
dev->scalar_ena = true;
dev->rx_offload_flags |= NIX_RX_OFFLOAD_TSTAMP_F;
/* Setting up the function pointers as per new offload flags */
otx2_eth_set_rx_function(eth_dev);
otx2_eth_set_tx_function(eth_dev);
}
static uint16_t
nix_eth_ptp_vf_burst(void *queue, struct rte_mbuf **mbufs, uint16_t pkts)
{
struct otx2_eth_rxq *rxq = queue;
struct rte_eth_dev *eth_dev;
RTE_SET_USED(mbufs);
RTE_SET_USED(pkts);
eth_dev = rxq->eth_dev;
otx2_nix_ptp_enable_vf(eth_dev);
return 0;
}
static int
nix_read_raw_clock(struct otx2_eth_dev *dev, uint64_t *clock, uint64_t *tsc,
uint8_t is_pmu)
{
struct otx2_mbox *mbox = dev->mbox;
struct ptp_req *req;
struct ptp_rsp *rsp;
int rc;
req = otx2_mbox_alloc_msg_ptp_op(mbox);
req->op = PTP_OP_GET_CLOCK;
req->is_pmu = is_pmu;
rc = otx2_mbox_process_msg(mbox, (void *)&rsp);
if (rc)
goto fail;
if (clock)
*clock = rsp->clk;
if (tsc)
*tsc = rsp->tsc;
fail:
return rc;
}
/* This function calculates two parameters "clk_freq_mult" and
* "clk_delta" which is useful in deriving PTP HI clock from
* timestamp counter (tsc) value.
*/
int
otx2_nix_raw_clock_tsc_conv(struct otx2_eth_dev *dev)
{
uint64_t ticks_base = 0, ticks = 0, tsc = 0, t_freq;
int rc, val;
/* Calculating the frequency at which PTP HI clock is running */
rc = nix_read_raw_clock(dev, &ticks_base, &tsc, false);
if (rc) {
otx2_err("Failed to read the raw clock value: %d", rc);
goto fail;
}
rte_delay_ms(100);
rc = nix_read_raw_clock(dev, &ticks, &tsc, false);
if (rc) {
otx2_err("Failed to read the raw clock value: %d", rc);
goto fail;
}
t_freq = (ticks - ticks_base) * 10;
/* Calculating the freq multiplier viz the ratio between the
* frequency at which PTP HI clock works and tsc clock runs
*/
dev->clk_freq_mult =
(double)pow(10, floor(log10(t_freq))) / rte_get_timer_hz();
val = false;
#ifdef RTE_ARM_EAL_RDTSC_USE_PMU
val = true;
#endif
rc = nix_read_raw_clock(dev, &ticks, &tsc, val);
if (rc) {
otx2_err("Failed to read the raw clock value: %d", rc);
goto fail;
}
/* Calculating delta between PTP HI clock and tsc */
dev->clk_delta = ((uint64_t)(ticks / dev->clk_freq_mult) - tsc);
fail:
return rc;
}
static void
nix_start_timecounters(struct rte_eth_dev *eth_dev)
{
struct otx2_eth_dev *dev = otx2_eth_pmd_priv(eth_dev);
memset(&dev->systime_tc, 0, sizeof(struct rte_timecounter));
memset(&dev->rx_tstamp_tc, 0, sizeof(struct rte_timecounter));
memset(&dev->tx_tstamp_tc, 0, sizeof(struct rte_timecounter));
dev->systime_tc.cc_mask = OTX2_CYCLECOUNTER_MASK;
dev->rx_tstamp_tc.cc_mask = OTX2_CYCLECOUNTER_MASK;
dev->tx_tstamp_tc.cc_mask = OTX2_CYCLECOUNTER_MASK;
}
static int
nix_ptp_config(struct rte_eth_dev *eth_dev, int en)
{
struct otx2_eth_dev *dev = otx2_eth_pmd_priv(eth_dev);
struct otx2_mbox *mbox = dev->mbox;
uint8_t rc = -EINVAL;
if (otx2_dev_is_vf_or_sdp(dev) || otx2_dev_is_lbk(dev))
return rc;
if (en) {
/* Enable time stamping of sent PTP packets. */
otx2_mbox_alloc_msg_nix_lf_ptp_tx_enable(mbox);
rc = otx2_mbox_process(mbox);
if (rc) {
otx2_err("MBOX ptp tx conf enable failed: err %d", rc);
return rc;
}
/* Enable time stamping of received PTP packets. */
otx2_mbox_alloc_msg_cgx_ptp_rx_enable(mbox);
} else {
/* Disable time stamping of sent PTP packets. */
otx2_mbox_alloc_msg_nix_lf_ptp_tx_disable(mbox);
rc = otx2_mbox_process(mbox);
if (rc) {
otx2_err("MBOX ptp tx conf disable failed: err %d", rc);
return rc;
}
/* Disable time stamping of received PTP packets. */
otx2_mbox_alloc_msg_cgx_ptp_rx_disable(mbox);
}
return otx2_mbox_process(mbox);
}
int
otx2_eth_dev_ptp_info_update(struct otx2_dev *dev, bool ptp_en)
{
struct otx2_eth_dev *otx2_dev = (struct otx2_eth_dev *)dev;
struct rte_eth_dev *eth_dev;
int i;
if (!dev)
return -EINVAL;
eth_dev = otx2_dev->eth_dev;
if (!eth_dev)
return -EINVAL;
otx2_dev->ptp_en = ptp_en;
for (i = 0; i < eth_dev->data->nb_rx_queues; i++) {
struct otx2_eth_rxq *rxq = eth_dev->data->rx_queues[i];
rxq->mbuf_initializer =
otx2_nix_rxq_mbuf_setup(otx2_dev,
eth_dev->data->port_id);
}
if (otx2_dev_is_vf(otx2_dev) && !(otx2_dev_is_sdp(otx2_dev)) &&
!(otx2_dev_is_lbk(otx2_dev))) {
/* In case of VF, setting of MTU cant be done directly in this
* function as this is running as part of MBOX request(PF->VF)
* and MTU setting also requires MBOX message to be
* sent(VF->PF)
*/
eth_dev->rx_pkt_burst = nix_eth_ptp_vf_burst;
rte_mb();
}
return 0;
}
int
otx2_nix_timesync_enable(struct rte_eth_dev *eth_dev)
{
struct otx2_eth_dev *dev = otx2_eth_pmd_priv(eth_dev);
int i, rc = 0;
/* If we are VF/SDP/LBK, ptp cannot not be enabled */
if (otx2_dev_is_vf_or_sdp(dev) || otx2_dev_is_lbk(dev)) {
otx2_info("PTP cannot be enabled in case of VF/SDP/LBK");
return -EINVAL;
}
if (otx2_ethdev_is_ptp_en(dev)) {
otx2_info("PTP mode is already enabled");
return -EINVAL;
}
if (!(dev->rx_offload_flags & NIX_RX_OFFLOAD_PTYPE_F)) {
otx2_err("Ptype offload is disabled, it should be enabled");
return -EINVAL;
}
/* Allocating a iova address for tx tstamp */
const struct rte_memzone *ts;
ts = rte_eth_dma_zone_reserve(eth_dev, "otx2_ts",
0, OTX2_ALIGN, OTX2_ALIGN,
dev->node);
if (ts == NULL) {
otx2_err("Failed to allocate mem for tx tstamp addr");
return -ENOMEM;
}
dev->tstamp.tx_tstamp_iova = ts->iova;
dev->tstamp.tx_tstamp = ts->addr;
/* System time should be already on by default */
nix_start_timecounters(eth_dev);
dev->rx_offloads |= DEV_RX_OFFLOAD_TIMESTAMP;
dev->rx_offload_flags |= NIX_RX_OFFLOAD_TSTAMP_F;
dev->tx_offload_flags |= NIX_TX_OFFLOAD_TSTAMP_F;
rc = nix_ptp_config(eth_dev, 1);
if (!rc) {
for (i = 0; i < eth_dev->data->nb_tx_queues; i++) {
struct otx2_eth_txq *txq = eth_dev->data->tx_queues[i];
otx2_nix_form_default_desc(txq);
}
/* Setting up the function pointers as per new offload flags */
otx2_eth_set_rx_function(eth_dev);
otx2_eth_set_tx_function(eth_dev);
}
rc = otx2_nix_recalc_mtu(eth_dev);
if (rc)
otx2_err("Failed to set MTU size for ptp");
return rc;
}
int
otx2_nix_timesync_disable(struct rte_eth_dev *eth_dev)
{
struct otx2_eth_dev *dev = otx2_eth_pmd_priv(eth_dev);
int i, rc = 0;
if (!otx2_ethdev_is_ptp_en(dev)) {
otx2_nix_dbg("PTP mode is disabled");
return -EINVAL;
}
if (otx2_dev_is_vf_or_sdp(dev) || otx2_dev_is_lbk(dev))
return -EINVAL;
dev->rx_offloads &= ~DEV_RX_OFFLOAD_TIMESTAMP;
dev->rx_offload_flags &= ~NIX_RX_OFFLOAD_TSTAMP_F;
dev->tx_offload_flags &= ~NIX_TX_OFFLOAD_TSTAMP_F;
rc = nix_ptp_config(eth_dev, 0);
if (!rc) {
for (i = 0; i < eth_dev->data->nb_tx_queues; i++) {
struct otx2_eth_txq *txq = eth_dev->data->tx_queues[i];
otx2_nix_form_default_desc(txq);
}
/* Setting up the function pointers as per new offload flags */
otx2_eth_set_rx_function(eth_dev);
otx2_eth_set_tx_function(eth_dev);
}
rc = otx2_nix_recalc_mtu(eth_dev);
if (rc)
otx2_err("Failed to set MTU size for ptp");
return rc;
}
int
otx2_nix_timesync_read_rx_timestamp(struct rte_eth_dev *eth_dev,
struct timespec *timestamp,
uint32_t __rte_unused flags)
{
struct otx2_eth_dev *dev = otx2_eth_pmd_priv(eth_dev);
struct otx2_timesync_info *tstamp = &dev->tstamp;
uint64_t ns;
if (!tstamp->rx_ready)
return -EINVAL;
ns = rte_timecounter_update(&dev->rx_tstamp_tc, tstamp->rx_tstamp);
*timestamp = rte_ns_to_timespec(ns);
tstamp->rx_ready = 0;
otx2_nix_dbg("rx timestamp: %"PRIu64" sec: %"PRIu64" nsec %"PRIu64"",
(uint64_t)tstamp->rx_tstamp, (uint64_t)timestamp->tv_sec,
(uint64_t)timestamp->tv_nsec);
return 0;
}
int
otx2_nix_timesync_read_tx_timestamp(struct rte_eth_dev *eth_dev,
struct timespec *timestamp)
{
struct otx2_eth_dev *dev = otx2_eth_pmd_priv(eth_dev);
struct otx2_timesync_info *tstamp = &dev->tstamp;
uint64_t ns;
if (*tstamp->tx_tstamp == 0)
return -EINVAL;
ns = rte_timecounter_update(&dev->tx_tstamp_tc, *tstamp->tx_tstamp);
*timestamp = rte_ns_to_timespec(ns);
otx2_nix_dbg("tx timestamp: %"PRIu64" sec: %"PRIu64" nsec %"PRIu64"",
*tstamp->tx_tstamp, (uint64_t)timestamp->tv_sec,
(uint64_t)timestamp->tv_nsec);
*tstamp->tx_tstamp = 0;
rte_wmb();
return 0;
}
int
otx2_nix_timesync_adjust_time(struct rte_eth_dev *eth_dev, int64_t delta)
{
struct otx2_eth_dev *dev = otx2_eth_pmd_priv(eth_dev);
struct otx2_mbox *mbox = dev->mbox;
struct ptp_req *req;
struct ptp_rsp *rsp;
int rc;
/* Adjust the frequent to make tics increments in 10^9 tics per sec */
if (delta < PTP_FREQ_ADJUST && delta > -PTP_FREQ_ADJUST) {
req = otx2_mbox_alloc_msg_ptp_op(mbox);
req->op = PTP_OP_ADJFINE;
req->scaled_ppm = delta;
rc = otx2_mbox_process_msg(mbox, (void *)&rsp);
if (rc)
return rc;
/* Since the frequency of PTP comp register is tuned, delta and
* freq mult calculation for deriving PTP_HI from timestamp
* counter should be done again.
*/
rc = otx2_nix_raw_clock_tsc_conv(dev);
if (rc)
otx2_err("Failed to calculate delta and freq mult");
}
dev->systime_tc.nsec += delta;
dev->rx_tstamp_tc.nsec += delta;
dev->tx_tstamp_tc.nsec += delta;
return 0;
}
int
otx2_nix_timesync_write_time(struct rte_eth_dev *eth_dev,
const struct timespec *ts)
{
struct otx2_eth_dev *dev = otx2_eth_pmd_priv(eth_dev);
uint64_t ns;
ns = rte_timespec_to_ns(ts);
/* Set the time counters to a new value. */
dev->systime_tc.nsec = ns;
dev->rx_tstamp_tc.nsec = ns;
dev->tx_tstamp_tc.nsec = ns;
return 0;
}
int
otx2_nix_timesync_read_time(struct rte_eth_dev *eth_dev, struct timespec *ts)
{
struct otx2_eth_dev *dev = otx2_eth_pmd_priv(eth_dev);
struct otx2_mbox *mbox = dev->mbox;
struct ptp_req *req;
struct ptp_rsp *rsp;
uint64_t ns;
int rc;
req = otx2_mbox_alloc_msg_ptp_op(mbox);
req->op = PTP_OP_GET_CLOCK;
rc = otx2_mbox_process_msg(mbox, (void *)&rsp);
if (rc)
return rc;
ns = rte_timecounter_update(&dev->systime_tc, rsp->clk);
*ts = rte_ns_to_timespec(ns);
otx2_nix_dbg("PTP time read: %"PRIu64" .%09"PRIu64"",
(uint64_t)ts->tv_sec, (uint64_t)ts->tv_nsec);
return 0;
}
int
otx2_nix_read_clock(struct rte_eth_dev *eth_dev, uint64_t *clock)
{
struct otx2_eth_dev *dev = otx2_eth_pmd_priv(eth_dev);
/* This API returns the raw PTP HI clock value. Since LFs doesn't
* have direct access to PTP registers and it requires mbox msg
* to AF for this value. In fastpath reading this value for every
* packet (which involes mbox call) becomes very expensive, hence
* we should be able to derive PTP HI clock value from tsc by
* using freq_mult and clk_delta calculated during configure stage.
*/
*clock = (rte_get_tsc_cycles() + dev->clk_delta) * dev->clk_freq_mult;
return 0;
}