numam-dpdk/drivers/net/sfc/sfc_intr.c
Georgiy Levashov 4279b54e28 net/sfc: support Rx interrupts for efx datapath
When Rx interrupts are disabled, we simply disable rearm when
the interrupt fires the next time. So, the next packet will
trigger interrupt (if it is not happened yet after previous Rx
burst processing).

Signed-off-by: Georgiy Levashov <georgiy.levashov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
2019-06-14 00:01:00 +09:00

355 lines
8.2 KiB
C

/* SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (c) 2016-2018 Solarflare Communications Inc.
* All rights reserved.
*
* This software was jointly developed between OKTET Labs (under contract
* for Solarflare) and Solarflare Communications, Inc.
*/
/*
* At the momemt of writing DPDK v16.07 has notion of two types of
* interrupts: LSC (link status change) and RXQ (receive indication).
* It allows to register interrupt callback for entire device which is
* not intended to be used for receive indication (i.e. link status
* change indication only). The handler has no information which HW
* interrupt has triggered it, so we don't know which event queue should
* be polled/reprimed (except qmask in the case of legacy line interrupt).
*/
#include <rte_common.h>
#include <rte_interrupts.h>
#include "efx.h"
#include "sfc.h"
#include "sfc_log.h"
#include "sfc_ev.h"
static void
sfc_intr_handle_mgmt_evq(struct sfc_adapter *sa)
{
struct sfc_evq *evq;
rte_spinlock_lock(&sa->mgmt_evq_lock);
evq = sa->mgmt_evq;
if (!sa->mgmt_evq_running) {
sfc_log_init(sa, "interrupt on not running management EVQ %u",
evq->evq_index);
} else {
sfc_ev_qpoll(evq);
if (sfc_ev_qprime(evq) != 0)
sfc_err(sa, "cannot prime EVQ %u", evq->evq_index);
}
rte_spinlock_unlock(&sa->mgmt_evq_lock);
}
static void
sfc_intr_line_handler(void *cb_arg)
{
struct sfc_adapter *sa = (struct sfc_adapter *)cb_arg;
efx_nic_t *enp = sa->nic;
boolean_t fatal;
uint32_t qmask;
unsigned int lsc_seq = sa->port.lsc_seq;
struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(sa->eth_dev);
sfc_log_init(sa, "entry");
if (sa->state != SFC_ADAPTER_STARTED &&
sa->state != SFC_ADAPTER_STARTING &&
sa->state != SFC_ADAPTER_STOPPING) {
sfc_log_init(sa,
"interrupt on stopped adapter, don't reenable");
goto exit;
}
efx_intr_status_line(enp, &fatal, &qmask);
if (fatal) {
(void)efx_intr_disable(enp);
(void)efx_intr_fatal(enp);
sfc_err(sa, "fatal, interrupts disabled");
goto exit;
}
if (qmask & (1 << sa->mgmt_evq_index))
sfc_intr_handle_mgmt_evq(sa);
if (rte_intr_enable(&pci_dev->intr_handle) != 0)
sfc_err(sa, "cannot reenable interrupts");
sfc_log_init(sa, "done");
exit:
if (lsc_seq != sa->port.lsc_seq) {
sfc_notice(sa, "link status change event: link %s",
sa->eth_dev->data->dev_link.link_status ?
"UP" : "DOWN");
_rte_eth_dev_callback_process(sa->eth_dev,
RTE_ETH_EVENT_INTR_LSC,
NULL);
}
}
static void
sfc_intr_message_handler(void *cb_arg)
{
struct sfc_adapter *sa = (struct sfc_adapter *)cb_arg;
efx_nic_t *enp = sa->nic;
boolean_t fatal;
unsigned int lsc_seq = sa->port.lsc_seq;
struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(sa->eth_dev);
sfc_log_init(sa, "entry");
if (sa->state != SFC_ADAPTER_STARTED &&
sa->state != SFC_ADAPTER_STARTING &&
sa->state != SFC_ADAPTER_STOPPING) {
sfc_log_init(sa, "adapter not-started, don't reenable");
goto exit;
}
efx_intr_status_message(enp, sa->mgmt_evq_index, &fatal);
if (fatal) {
(void)efx_intr_disable(enp);
(void)efx_intr_fatal(enp);
sfc_err(sa, "fatal, interrupts disabled");
goto exit;
}
sfc_intr_handle_mgmt_evq(sa);
if (rte_intr_enable(&pci_dev->intr_handle) != 0)
sfc_err(sa, "cannot reenable interrupts");
sfc_log_init(sa, "done");
exit:
if (lsc_seq != sa->port.lsc_seq) {
sfc_notice(sa, "link status change event");
_rte_eth_dev_callback_process(sa->eth_dev,
RTE_ETH_EVENT_INTR_LSC,
NULL);
}
}
int
sfc_intr_start(struct sfc_adapter *sa)
{
struct sfc_intr *intr = &sa->intr;
struct rte_intr_handle *intr_handle;
struct rte_pci_device *pci_dev;
int rc;
sfc_log_init(sa, "entry");
/*
* The EFX common code event queue module depends on the interrupt
* module. Ensure that the interrupt module is always initialized
* (even if interrupts are not used). Status memory is required
* for Siena only and may be NULL for EF10.
*/
sfc_log_init(sa, "efx_intr_init");
rc = efx_intr_init(sa->nic, intr->type, NULL);
if (rc != 0)
goto fail_intr_init;
pci_dev = RTE_ETH_DEV_TO_PCI(sa->eth_dev);
intr_handle = &pci_dev->intr_handle;
if (intr->handler != NULL) {
if (intr->rxq_intr && rte_intr_cap_multiple(intr_handle)) {
uint32_t intr_vector;
intr_vector = sa->eth_dev->data->nb_rx_queues;
rc = rte_intr_efd_enable(intr_handle, intr_vector);
if (rc != 0)
goto fail_rte_intr_efd_enable;
}
if (rte_intr_dp_is_en(intr_handle)) {
intr_handle->intr_vec =
rte_calloc("intr_vec",
sa->eth_dev->data->nb_rx_queues, sizeof(int),
0);
if (intr_handle->intr_vec == NULL) {
sfc_err(sa,
"Failed to allocate %d rx_queues intr_vec",
sa->eth_dev->data->nb_rx_queues);
goto fail_intr_vector_alloc;
}
}
sfc_log_init(sa, "rte_intr_callback_register");
rc = rte_intr_callback_register(intr_handle, intr->handler,
(void *)sa);
if (rc != 0) {
sfc_err(sa,
"cannot register interrupt handler (rc=%d)",
rc);
/*
* Convert error code from negative returned by RTE API
* to positive used in the driver.
*/
rc = -rc;
goto fail_rte_intr_cb_reg;
}
sfc_log_init(sa, "rte_intr_enable");
rc = rte_intr_enable(intr_handle);
if (rc != 0) {
sfc_err(sa, "cannot enable interrupts (rc=%d)", rc);
/*
* Convert error code from negative returned by RTE API
* to positive used in the driver.
*/
rc = -rc;
goto fail_rte_intr_enable;
}
sfc_log_init(sa, "efx_intr_enable");
efx_intr_enable(sa->nic);
}
sfc_log_init(sa, "done type=%u max_intr=%d nb_efd=%u vec=%p",
intr_handle->type, intr_handle->max_intr,
intr_handle->nb_efd, intr_handle->intr_vec);
return 0;
fail_rte_intr_enable:
rte_intr_callback_unregister(intr_handle, intr->handler, (void *)sa);
fail_rte_intr_cb_reg:
rte_free(intr_handle->intr_vec);
fail_intr_vector_alloc:
rte_intr_efd_disable(intr_handle);
fail_rte_intr_efd_enable:
efx_intr_fini(sa->nic);
fail_intr_init:
sfc_log_init(sa, "failed %d", rc);
return rc;
}
void
sfc_intr_stop(struct sfc_adapter *sa)
{
struct sfc_intr *intr = &sa->intr;
struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(sa->eth_dev);
sfc_log_init(sa, "entry");
if (intr->handler != NULL) {
struct rte_intr_handle *intr_handle;
int rc;
efx_intr_disable(sa->nic);
intr_handle = &pci_dev->intr_handle;
rte_free(intr_handle->intr_vec);
rte_intr_efd_disable(intr_handle);
if (rte_intr_disable(intr_handle) != 0)
sfc_err(sa, "cannot disable interrupts");
while ((rc = rte_intr_callback_unregister(intr_handle,
intr->handler, (void *)sa)) == -EAGAIN)
;
if (rc != 1)
sfc_err(sa,
"cannot unregister interrupt handler %d",
rc);
}
efx_intr_fini(sa->nic);
sfc_log_init(sa, "done");
}
int
sfc_intr_configure(struct sfc_adapter *sa)
{
struct sfc_intr *intr = &sa->intr;
sfc_log_init(sa, "entry");
intr->handler = NULL;
intr->lsc_intr = (sa->eth_dev->data->dev_conf.intr_conf.lsc != 0);
intr->rxq_intr = (sa->eth_dev->data->dev_conf.intr_conf.rxq != 0);
if (!intr->lsc_intr && !intr->rxq_intr)
goto done;
switch (intr->type) {
case EFX_INTR_MESSAGE:
intr->handler = sfc_intr_message_handler;
break;
case EFX_INTR_LINE:
intr->handler = sfc_intr_line_handler;
break;
case EFX_INTR_INVALID:
sfc_warn(sa, "interrupts are not supported");
break;
default:
sfc_panic(sa, "unexpected EFX interrupt type %u\n", intr->type);
break;
}
done:
sfc_log_init(sa, "done");
return 0;
}
void
sfc_intr_close(struct sfc_adapter *sa)
{
sfc_log_init(sa, "entry");
sfc_log_init(sa, "done");
}
int
sfc_intr_attach(struct sfc_adapter *sa)
{
struct sfc_intr *intr = &sa->intr;
struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(sa->eth_dev);
sfc_log_init(sa, "entry");
switch (pci_dev->intr_handle.type) {
#ifdef RTE_EXEC_ENV_LINUX
case RTE_INTR_HANDLE_UIO_INTX:
case RTE_INTR_HANDLE_VFIO_LEGACY:
intr->type = EFX_INTR_LINE;
break;
case RTE_INTR_HANDLE_UIO:
case RTE_INTR_HANDLE_VFIO_MSI:
case RTE_INTR_HANDLE_VFIO_MSIX:
intr->type = EFX_INTR_MESSAGE;
break;
#endif
default:
intr->type = EFX_INTR_INVALID;
break;
}
sfc_log_init(sa, "done");
return 0;
}
void
sfc_intr_detach(struct sfc_adapter *sa)
{
sfc_log_init(sa, "entry");
sa->intr.type = EFX_INTR_INVALID;
sfc_log_init(sa, "done");
}