797ce8eec7
Management firmware does not properly clean IGU block in PF FLR flow
which may result in undelivered attentions for link events from
default status block.
Add a workaround in PMD to execute extra IGU cleanup right after PF FLR
is done.
Fixes: 9e2f08a4ad ("net/qede/base: add request for PF FLR before load request")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
1946 lines
70 KiB
C
1946 lines
70 KiB
C
/* SPDX-License-Identifier: BSD-3-Clause
|
|
* Copyright (c) 2016 - 2018 Cavium Inc.
|
|
* All rights reserved.
|
|
* www.cavium.com
|
|
*/
|
|
|
|
/****************************************************************************
|
|
*
|
|
* Name: mcp_public.h
|
|
*
|
|
* Description: MCP public data
|
|
*
|
|
* Created: 13/01/2013 yanivr
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifndef MCP_PUBLIC_H
|
|
#define MCP_PUBLIC_H
|
|
|
|
#define VF_MAX_STATIC 192 /* In case of AH */
|
|
|
|
#define MCP_GLOB_PATH_MAX 2
|
|
#define MCP_PORT_MAX 2 /* Global */
|
|
#define MCP_GLOB_PORT_MAX 4 /* Global */
|
|
#define MCP_GLOB_FUNC_MAX 16 /* Global */
|
|
|
|
typedef u32 offsize_t; /* In DWORDS !!! */
|
|
/* Offset from the beginning of the MCP scratchpad */
|
|
#define OFFSIZE_OFFSET_OFFSET 0
|
|
#define OFFSIZE_OFFSET_MASK 0x0000ffff
|
|
/* Size of specific element (not the whole array if any) */
|
|
#define OFFSIZE_SIZE_OFFSET 16
|
|
#define OFFSIZE_SIZE_MASK 0xffff0000
|
|
|
|
/* SECTION_OFFSET is calculating the offset in bytes out of offsize */
|
|
#define SECTION_OFFSET(_offsize) \
|
|
((((_offsize & OFFSIZE_OFFSET_MASK) >> OFFSIZE_OFFSET_OFFSET) << 2))
|
|
|
|
/* SECTION_SIZE is calculating the size in bytes out of offsize */
|
|
#define SECTION_SIZE(_offsize) \
|
|
(((_offsize & OFFSIZE_SIZE_MASK) >> OFFSIZE_SIZE_OFFSET) << 2)
|
|
|
|
/* SECTION_ADDR returns the GRC addr of a section, given offsize and index
|
|
* within section
|
|
*/
|
|
#define SECTION_ADDR(_offsize, idx) \
|
|
(MCP_REG_SCRATCH + \
|
|
SECTION_OFFSET(_offsize) + (SECTION_SIZE(_offsize) * idx))
|
|
|
|
/* SECTION_OFFSIZE_ADDR returns the GRC addr to the offsize address. Use
|
|
* offsetof, since the OFFSETUP collide with the firmware definition
|
|
*/
|
|
#define SECTION_OFFSIZE_ADDR(_pub_base, _section) \
|
|
(_pub_base + offsetof(struct mcp_public_data, sections[_section]))
|
|
/* PHY configuration */
|
|
struct eth_phy_cfg {
|
|
/* 0 = autoneg, 1000/10000/20000/25000/40000/50000/100000 */
|
|
u32 speed;
|
|
#define ETH_SPEED_AUTONEG 0
|
|
#define ETH_SPEED_SMARTLINQ 0x8 /* deprecated - use link_modes field instead */
|
|
|
|
u32 pause; /* bitmask */
|
|
#define ETH_PAUSE_NONE 0x0
|
|
#define ETH_PAUSE_AUTONEG 0x1
|
|
#define ETH_PAUSE_RX 0x2
|
|
#define ETH_PAUSE_TX 0x4
|
|
|
|
u32 adv_speed; /* Default should be the speed_cap_mask */
|
|
u32 loopback_mode;
|
|
#define ETH_LOOPBACK_NONE (0)
|
|
/* Serdes loopback. In AH, it refers to Near End */
|
|
#define ETH_LOOPBACK_INT_PHY (1)
|
|
#define ETH_LOOPBACK_EXT_PHY (2) /* External PHY Loopback */
|
|
/* External Loopback (Require loopback plug) */
|
|
#define ETH_LOOPBACK_EXT (3)
|
|
#define ETH_LOOPBACK_MAC (4) /* MAC Loopback - not supported */
|
|
#define ETH_LOOPBACK_CNIG_AH_ONLY_0123 (5) /* Port to itself */
|
|
#define ETH_LOOPBACK_CNIG_AH_ONLY_2301 (6) /* Port to Port */
|
|
#define ETH_LOOPBACK_PCS_AH_ONLY (7) /* PCS loopback (TX to RX) */
|
|
/* Loop RX packet from PCS to TX */
|
|
#define ETH_LOOPBACK_REVERSE_MAC_AH_ONLY (8)
|
|
/* Remote Serdes Loopback (RX to TX) */
|
|
#define ETH_LOOPBACK_INT_PHY_FEA_AH_ONLY (9)
|
|
|
|
u32 eee_cfg;
|
|
/* EEE is enabled (configuration). Refer to eee_status->active for negotiated
|
|
* status
|
|
*/
|
|
#define EEE_CFG_EEE_ENABLED (1 << 0)
|
|
#define EEE_CFG_TX_LPI (1 << 1)
|
|
#define EEE_CFG_ADV_SPEED_1G (1 << 2)
|
|
#define EEE_CFG_ADV_SPEED_10G (1 << 3)
|
|
#define EEE_TX_TIMER_USEC_MASK (0xfffffff0)
|
|
#define EEE_TX_TIMER_USEC_OFFSET 4
|
|
#define EEE_TX_TIMER_USEC_BALANCED_TIME (0xa00)
|
|
#define EEE_TX_TIMER_USEC_AGGRESSIVE_TIME (0x100)
|
|
#define EEE_TX_TIMER_USEC_LATENCY_TIME (0x6000)
|
|
|
|
u32 link_modes; /* Additional link modes */
|
|
#define LINK_MODE_SMARTLINQ_ENABLE 0x1 /* XXX Deprecate */
|
|
};
|
|
|
|
struct port_mf_cfg {
|
|
u32 dynamic_cfg; /* device control channel */
|
|
#define PORT_MF_CFG_OV_TAG_MASK 0x0000ffff
|
|
#define PORT_MF_CFG_OV_TAG_OFFSET 0
|
|
#define PORT_MF_CFG_OV_TAG_DEFAULT PORT_MF_CFG_OV_TAG_MASK
|
|
|
|
u32 reserved[1];
|
|
};
|
|
|
|
/* DO NOT add new fields in the middle
|
|
* MUST be synced with struct pmm_stats_map
|
|
*/
|
|
struct eth_stats {
|
|
u64 r64; /* 0x00 (Offset 0x00 ) RX 64-byte frame counter*/
|
|
u64 r127; /* 0x01 (Offset 0x08 ) RX 65 to 127 byte frame counter*/
|
|
u64 r255; /* 0x02 (Offset 0x10 ) RX 128 to 255 byte frame counter*/
|
|
u64 r511; /* 0x03 (Offset 0x18 ) RX 256 to 511 byte frame counter*/
|
|
u64 r1023; /* 0x04 (Offset 0x20 ) RX 512 to 1023 byte frame counter*/
|
|
/* 0x05 (Offset 0x28 ) RX 1024 to 1518 byte frame counter */
|
|
u64 r1518;
|
|
union {
|
|
struct { /* bb */
|
|
/* 0x06 (Offset 0x30 ) RX 1519 to 1522 byte VLAN-tagged frame counter */
|
|
u64 r1522;
|
|
/* 0x07 (Offset 0x38 ) RX 1519 to 2047 byte frame counter*/
|
|
u64 r2047;
|
|
/* 0x08 (Offset 0x40 ) RX 2048 to 4095 byte frame counter*/
|
|
u64 r4095;
|
|
/* 0x09 (Offset 0x48 ) RX 4096 to 9216 byte frame counter*/
|
|
u64 r9216;
|
|
/* 0x0A (Offset 0x50 ) RX 9217 to 16383 byte frame counter */
|
|
u64 r16383;
|
|
} bb0;
|
|
struct { /* ah */
|
|
u64 unused1;
|
|
/* 0x07 (Offset 0x38 ) RX 1519 to max byte frame counter*/
|
|
u64 r1519_to_max;
|
|
u64 unused2;
|
|
u64 unused3;
|
|
u64 unused4;
|
|
} ah0;
|
|
} u0;
|
|
u64 rfcs; /* 0x0F (Offset 0x58 ) RX FCS error frame counter*/
|
|
u64 rxcf; /* 0x10 (Offset 0x60 ) RX control frame counter*/
|
|
u64 rxpf; /* 0x11 (Offset 0x68 ) RX pause frame counter*/
|
|
u64 rxpp; /* 0x12 (Offset 0x70 ) RX PFC frame counter*/
|
|
u64 raln; /* 0x16 (Offset 0x78 ) RX alignment error counter*/
|
|
u64 rfcr; /* 0x19 (Offset 0x80 ) RX false carrier counter */
|
|
u64 rovr; /* 0x1A (Offset 0x88 ) RX oversized frame counter*/
|
|
u64 rjbr; /* 0x1B (Offset 0x90 ) RX jabber frame counter */
|
|
u64 rund; /* 0x34 (Offset 0x98 ) RX undersized frame counter */
|
|
u64 rfrg; /* 0x35 (Offset 0xa0 ) RX fragment counter */
|
|
u64 t64; /* 0x40 (Offset 0xa8 ) TX 64-byte frame counter */
|
|
u64 t127; /* 0x41 (Offset 0xb0 ) TX 65 to 127 byte frame counter */
|
|
u64 t255; /* 0x42 (Offset 0xb8 ) TX 128 to 255 byte frame counter*/
|
|
u64 t511; /* 0x43 (Offset 0xc0 ) TX 256 to 511 byte frame counter*/
|
|
u64 t1023; /* 0x44 (Offset 0xc8 ) TX 512 to 1023 byte frame counter*/
|
|
/* 0x45 (Offset 0xd0 ) TX 1024 to 1518 byte frame counter */
|
|
u64 t1518;
|
|
union {
|
|
struct { /* bb */
|
|
/* 0x47 (Offset 0xd8 ) TX 1519 to 2047 byte frame counter */
|
|
u64 t2047;
|
|
/* 0x48 (Offset 0xe0 ) TX 2048 to 4095 byte frame counter */
|
|
u64 t4095;
|
|
/* 0x49 (Offset 0xe8 ) TX 4096 to 9216 byte frame counter */
|
|
u64 t9216;
|
|
/* 0x4A (Offset 0xf0 ) TX 9217 to 16383 byte frame counter */
|
|
u64 t16383;
|
|
} bb1;
|
|
struct { /* ah */
|
|
/* 0x47 (Offset 0xd8 ) TX 1519 to max byte frame counter */
|
|
u64 t1519_to_max;
|
|
u64 unused6;
|
|
u64 unused7;
|
|
u64 unused8;
|
|
} ah1;
|
|
} u1;
|
|
u64 txpf; /* 0x50 (Offset 0xf8 ) TX pause frame counter */
|
|
u64 txpp; /* 0x51 (Offset 0x100) TX PFC frame counter */
|
|
/* 0x6C (Offset 0x108) Transmit Logical Type LLFC message counter */
|
|
union {
|
|
struct { /* bb */
|
|
/* 0x6C (Offset 0x108) Transmit Logical Type LLFC message counter */
|
|
u64 tlpiec;
|
|
/* 0x6E (Offset 0x110) Transmit Total Collision Counter */
|
|
u64 tncl;
|
|
} bb2;
|
|
struct { /* ah */
|
|
u64 unused9;
|
|
u64 unused10;
|
|
} ah2;
|
|
} u2;
|
|
u64 rbyte; /* 0x3d (Offset 0x118) RX byte counter */
|
|
u64 rxuca; /* 0x0c (Offset 0x120) RX UC frame counter */
|
|
u64 rxmca; /* 0x0d (Offset 0x128) RX MC frame counter */
|
|
u64 rxbca; /* 0x0e (Offset 0x130) RX BC frame counter */
|
|
/* 0x22 (Offset 0x138) RX good frame (good CRC, not oversized, no ERROR) */
|
|
u64 rxpok;
|
|
u64 tbyte; /* 0x6f (Offset 0x140) TX byte counter */
|
|
u64 txuca; /* 0x4d (Offset 0x148) TX UC frame counter */
|
|
u64 txmca; /* 0x4e (Offset 0x150) TX MC frame counter */
|
|
u64 txbca; /* 0x4f (Offset 0x158) TX BC frame counter */
|
|
u64 txcf; /* 0x54 (Offset 0x160) TX control frame counter */
|
|
/* HSI - Cannot add more stats to this struct. If needed, then need to open new
|
|
* struct
|
|
*/
|
|
|
|
};
|
|
|
|
struct brb_stats {
|
|
u64 brb_truncate[8];
|
|
u64 brb_discard[8];
|
|
};
|
|
|
|
struct port_stats {
|
|
struct brb_stats brb;
|
|
struct eth_stats eth;
|
|
};
|
|
|
|
/*----+------------------------------------------------------------------------
|
|
* C | Number and | Ports in| Ports in|2 PHY-s |# of ports|# of engines
|
|
* h | rate of | team #1 | team #2 |are used|per path | (paths)
|
|
* i | physical | | | | | enabled
|
|
* p | ports | | | | |
|
|
*====+============+=========+=========+========+==========+===================
|
|
* BB | 1x100G | This is special mode, where there are actually 2 HW func
|
|
* BB | 2x10/20Gbps| 0,1 | NA | No | 1 | 1
|
|
* BB | 2x40 Gbps | 0,1 | NA | Yes | 1 | 1
|
|
* BB | 2x50Gbps | 0,1 | NA | No | 1 | 1
|
|
* BB | 4x10Gbps | 0,2 | 1,3 | No | 1/2 | 1,2 (2 is optional)
|
|
* BB | 4x10Gbps | 0,1 | 2,3 | No | 1/2 | 1,2 (2 is optional)
|
|
* BB | 4x10Gbps | 0,3 | 1,2 | No | 1/2 | 1,2 (2 is optional)
|
|
* BB | 4x10Gbps | 0,1,2,3 | NA | No | 1 | 1
|
|
* AH | 2x10/20Gbps| 0,1 | NA | NA | 1 | NA
|
|
* AH | 4x10Gbps | 0,1 | 2,3 | NA | 2 | NA
|
|
* AH | 4x10Gbps | 0,2 | 1,3 | NA | 2 | NA
|
|
* AH | 4x10Gbps | 0,3 | 1,2 | NA | 2 | NA
|
|
* AH | 4x10Gbps | 0,1,2,3 | NA | NA | 1 | NA
|
|
*====+============+=========+=========+========+==========+===================
|
|
*/
|
|
|
|
#define CMT_TEAM0 0
|
|
#define CMT_TEAM1 1
|
|
#define CMT_TEAM_MAX 2
|
|
|
|
struct couple_mode_teaming {
|
|
u8 port_cmt[MCP_GLOB_PORT_MAX];
|
|
#define PORT_CMT_IN_TEAM (1 << 0)
|
|
|
|
#define PORT_CMT_PORT_ROLE (1 << 1)
|
|
#define PORT_CMT_PORT_INACTIVE (0 << 1)
|
|
#define PORT_CMT_PORT_ACTIVE (1 << 1)
|
|
|
|
#define PORT_CMT_TEAM_MASK (1 << 2)
|
|
#define PORT_CMT_TEAM0 (0 << 2)
|
|
#define PORT_CMT_TEAM1 (1 << 2)
|
|
};
|
|
|
|
/**************************************
|
|
* LLDP and DCBX HSI structures
|
|
**************************************/
|
|
#define LLDP_CHASSIS_ID_STAT_LEN 4
|
|
#define LLDP_PORT_ID_STAT_LEN 4
|
|
#define DCBX_MAX_APP_PROTOCOL 32
|
|
#define MAX_SYSTEM_LLDP_TLV_DATA 32 /* In dwords. 128 in bytes*/
|
|
#define MAX_TLV_BUFFER 128 /* In dwords. 512 in bytes*/
|
|
typedef enum _lldp_agent_e {
|
|
LLDP_NEAREST_BRIDGE = 0,
|
|
LLDP_NEAREST_NON_TPMR_BRIDGE,
|
|
LLDP_NEAREST_CUSTOMER_BRIDGE,
|
|
LLDP_MAX_LLDP_AGENTS
|
|
} lldp_agent_e;
|
|
|
|
struct lldp_config_params_s {
|
|
u32 config;
|
|
#define LLDP_CONFIG_TX_INTERVAL_MASK 0x000000ff
|
|
#define LLDP_CONFIG_TX_INTERVAL_OFFSET 0
|
|
#define LLDP_CONFIG_HOLD_MASK 0x00000f00
|
|
#define LLDP_CONFIG_HOLD_OFFSET 8
|
|
#define LLDP_CONFIG_MAX_CREDIT_MASK 0x0000f000
|
|
#define LLDP_CONFIG_MAX_CREDIT_OFFSET 12
|
|
#define LLDP_CONFIG_ENABLE_RX_MASK 0x40000000
|
|
#define LLDP_CONFIG_ENABLE_RX_OFFSET 30
|
|
#define LLDP_CONFIG_ENABLE_TX_MASK 0x80000000
|
|
#define LLDP_CONFIG_ENABLE_TX_OFFSET 31
|
|
/* Holds local Chassis ID TLV header, subtype and 9B of payload.
|
|
* If firtst byte is 0, then we will use default chassis ID
|
|
*/
|
|
u32 local_chassis_id[LLDP_CHASSIS_ID_STAT_LEN];
|
|
/* Holds local Port ID TLV header, subtype and 9B of payload.
|
|
* If firtst byte is 0, then we will use default port ID
|
|
*/
|
|
u32 local_port_id[LLDP_PORT_ID_STAT_LEN];
|
|
};
|
|
|
|
struct lldp_status_params_s {
|
|
u32 prefix_seq_num;
|
|
u32 status; /* TBD */
|
|
/* Holds remote Chassis ID TLV header, subtype and 9B of payload. */
|
|
u32 peer_chassis_id[LLDP_CHASSIS_ID_STAT_LEN];
|
|
/* Holds remote Port ID TLV header, subtype and 9B of payload. */
|
|
u32 peer_port_id[LLDP_PORT_ID_STAT_LEN];
|
|
u32 suffix_seq_num;
|
|
};
|
|
|
|
struct dcbx_ets_feature {
|
|
u32 flags;
|
|
#define DCBX_ETS_ENABLED_MASK 0x00000001
|
|
#define DCBX_ETS_ENABLED_OFFSET 0
|
|
#define DCBX_ETS_WILLING_MASK 0x00000002
|
|
#define DCBX_ETS_WILLING_OFFSET 1
|
|
#define DCBX_ETS_ERROR_MASK 0x00000004
|
|
#define DCBX_ETS_ERROR_OFFSET 2
|
|
#define DCBX_ETS_CBS_MASK 0x00000008
|
|
#define DCBX_ETS_CBS_OFFSET 3
|
|
#define DCBX_ETS_MAX_TCS_MASK 0x000000f0
|
|
#define DCBX_ETS_MAX_TCS_OFFSET 4
|
|
#define DCBX_OOO_TC_MASK 0x00000f00
|
|
#define DCBX_OOO_TC_OFFSET 8
|
|
/* Entries in tc table are orginized that the left most is pri 0, right most is
|
|
* prio 7
|
|
*/
|
|
|
|
u32 pri_tc_tbl[1];
|
|
/* Fixed TCP OOO TC usage is deprecated and used only for driver backward
|
|
* compatibility
|
|
*/
|
|
#define DCBX_TCP_OOO_TC (4)
|
|
#define DCBX_TCP_OOO_K2_4PORT_TC (3)
|
|
|
|
#define NIG_ETS_ISCSI_OOO_CLIENT_OFFSET (DCBX_TCP_OOO_TC + 1)
|
|
#define DCBX_CEE_STRICT_PRIORITY 0xf
|
|
/* Entries in tc table are orginized that the left most is pri 0, right most is
|
|
* prio 7
|
|
*/
|
|
|
|
u32 tc_bw_tbl[2];
|
|
/* Entries in tc table are orginized that the left most is pri 0, right most is
|
|
* prio 7
|
|
*/
|
|
|
|
u32 tc_tsa_tbl[2];
|
|
#define DCBX_ETS_TSA_STRICT 0
|
|
#define DCBX_ETS_TSA_CBS 1
|
|
#define DCBX_ETS_TSA_ETS 2
|
|
};
|
|
|
|
struct dcbx_app_priority_entry {
|
|
u32 entry;
|
|
#define DCBX_APP_PRI_MAP_MASK 0x000000ff
|
|
#define DCBX_APP_PRI_MAP_OFFSET 0
|
|
#define DCBX_APP_PRI_0 0x01
|
|
#define DCBX_APP_PRI_1 0x02
|
|
#define DCBX_APP_PRI_2 0x04
|
|
#define DCBX_APP_PRI_3 0x08
|
|
#define DCBX_APP_PRI_4 0x10
|
|
#define DCBX_APP_PRI_5 0x20
|
|
#define DCBX_APP_PRI_6 0x40
|
|
#define DCBX_APP_PRI_7 0x80
|
|
#define DCBX_APP_SF_MASK 0x00000300
|
|
#define DCBX_APP_SF_OFFSET 8
|
|
#define DCBX_APP_SF_ETHTYPE 0
|
|
#define DCBX_APP_SF_PORT 1
|
|
#define DCBX_APP_SF_IEEE_MASK 0x0000f000
|
|
#define DCBX_APP_SF_IEEE_OFFSET 12
|
|
#define DCBX_APP_SF_IEEE_RESERVED 0
|
|
#define DCBX_APP_SF_IEEE_ETHTYPE 1
|
|
#define DCBX_APP_SF_IEEE_TCP_PORT 2
|
|
#define DCBX_APP_SF_IEEE_UDP_PORT 3
|
|
#define DCBX_APP_SF_IEEE_TCP_UDP_PORT 4
|
|
|
|
#define DCBX_APP_PROTOCOL_ID_MASK 0xffff0000
|
|
#define DCBX_APP_PROTOCOL_ID_OFFSET 16
|
|
};
|
|
|
|
|
|
/* FW structure in BE */
|
|
struct dcbx_app_priority_feature {
|
|
u32 flags;
|
|
#define DCBX_APP_ENABLED_MASK 0x00000001
|
|
#define DCBX_APP_ENABLED_OFFSET 0
|
|
#define DCBX_APP_WILLING_MASK 0x00000002
|
|
#define DCBX_APP_WILLING_OFFSET 1
|
|
#define DCBX_APP_ERROR_MASK 0x00000004
|
|
#define DCBX_APP_ERROR_OFFSET 2
|
|
/* Not in use
|
|
#define DCBX_APP_DEFAULT_PRI_MASK 0x00000f00
|
|
#define DCBX_APP_DEFAULT_PRI_OFFSET 8
|
|
*/
|
|
#define DCBX_APP_MAX_TCS_MASK 0x0000f000
|
|
#define DCBX_APP_MAX_TCS_OFFSET 12
|
|
#define DCBX_APP_NUM_ENTRIES_MASK 0x00ff0000
|
|
#define DCBX_APP_NUM_ENTRIES_OFFSET 16
|
|
struct dcbx_app_priority_entry app_pri_tbl[DCBX_MAX_APP_PROTOCOL];
|
|
};
|
|
|
|
/* FW structure in BE */
|
|
struct dcbx_features {
|
|
/* PG feature */
|
|
struct dcbx_ets_feature ets;
|
|
/* PFC feature */
|
|
u32 pfc;
|
|
#define DCBX_PFC_PRI_EN_BITMAP_MASK 0x000000ff
|
|
#define DCBX_PFC_PRI_EN_BITMAP_OFFSET 0
|
|
#define DCBX_PFC_PRI_EN_BITMAP_PRI_0 0x01
|
|
#define DCBX_PFC_PRI_EN_BITMAP_PRI_1 0x02
|
|
#define DCBX_PFC_PRI_EN_BITMAP_PRI_2 0x04
|
|
#define DCBX_PFC_PRI_EN_BITMAP_PRI_3 0x08
|
|
#define DCBX_PFC_PRI_EN_BITMAP_PRI_4 0x10
|
|
#define DCBX_PFC_PRI_EN_BITMAP_PRI_5 0x20
|
|
#define DCBX_PFC_PRI_EN_BITMAP_PRI_6 0x40
|
|
#define DCBX_PFC_PRI_EN_BITMAP_PRI_7 0x80
|
|
|
|
#define DCBX_PFC_FLAGS_MASK 0x0000ff00
|
|
#define DCBX_PFC_FLAGS_OFFSET 8
|
|
#define DCBX_PFC_CAPS_MASK 0x00000f00
|
|
#define DCBX_PFC_CAPS_OFFSET 8
|
|
#define DCBX_PFC_MBC_MASK 0x00004000
|
|
#define DCBX_PFC_MBC_OFFSET 14
|
|
#define DCBX_PFC_WILLING_MASK 0x00008000
|
|
#define DCBX_PFC_WILLING_OFFSET 15
|
|
#define DCBX_PFC_ENABLED_MASK 0x00010000
|
|
#define DCBX_PFC_ENABLED_OFFSET 16
|
|
#define DCBX_PFC_ERROR_MASK 0x00020000
|
|
#define DCBX_PFC_ERROR_OFFSET 17
|
|
|
|
/* APP feature */
|
|
struct dcbx_app_priority_feature app;
|
|
};
|
|
|
|
struct dcbx_local_params {
|
|
u32 config;
|
|
#define DCBX_CONFIG_VERSION_MASK 0x00000007
|
|
#define DCBX_CONFIG_VERSION_OFFSET 0
|
|
#define DCBX_CONFIG_VERSION_DISABLED 0
|
|
#define DCBX_CONFIG_VERSION_IEEE 1
|
|
#define DCBX_CONFIG_VERSION_CEE 2
|
|
#define DCBX_CONFIG_VERSION_DYNAMIC \
|
|
(DCBX_CONFIG_VERSION_IEEE | DCBX_CONFIG_VERSION_CEE)
|
|
#define DCBX_CONFIG_VERSION_STATIC 4
|
|
|
|
u32 flags;
|
|
struct dcbx_features features;
|
|
};
|
|
|
|
struct dcbx_mib {
|
|
u32 prefix_seq_num;
|
|
u32 flags;
|
|
/*
|
|
#define DCBX_CONFIG_VERSION_MASK 0x00000007
|
|
#define DCBX_CONFIG_VERSION_OFFSET 0
|
|
#define DCBX_CONFIG_VERSION_DISABLED 0
|
|
#define DCBX_CONFIG_VERSION_IEEE 1
|
|
#define DCBX_CONFIG_VERSION_CEE 2
|
|
#define DCBX_CONFIG_VERSION_STATIC 4
|
|
*/
|
|
struct dcbx_features features;
|
|
u32 suffix_seq_num;
|
|
};
|
|
|
|
struct lldp_system_tlvs_buffer_s {
|
|
u32 flags;
|
|
#define LLDP_SYSTEM_TLV_VALID_MASK 0x1
|
|
#define LLDP_SYSTEM_TLV_VALID_OFFSET 0
|
|
/* This bit defines if system TLVs are instead of mandatory TLVS or in
|
|
* addition to them. Set 1 for replacing mandatory TLVs
|
|
*/
|
|
#define LLDP_SYSTEM_TLV_MANDATORY_MASK 0x2
|
|
#define LLDP_SYSTEM_TLV_MANDATORY_OFFSET 1
|
|
#define LLDP_SYSTEM_TLV_LENGTH_MASK 0xffff0000
|
|
#define LLDP_SYSTEM_TLV_LENGTH_OFFSET 16
|
|
u32 data[MAX_SYSTEM_LLDP_TLV_DATA];
|
|
};
|
|
|
|
/* Since this struct is written by MFW and read by driver need to add
|
|
* sequence guards (as in case of DCBX MIB)
|
|
*/
|
|
struct lldp_received_tlvs_s {
|
|
u32 prefix_seq_num;
|
|
u32 length;
|
|
u32 tlvs_buffer[MAX_TLV_BUFFER];
|
|
u32 suffix_seq_num;
|
|
};
|
|
|
|
struct dcb_dscp_map {
|
|
u32 flags;
|
|
#define DCB_DSCP_ENABLE_MASK 0x1
|
|
#define DCB_DSCP_ENABLE_OFFSET 0
|
|
#define DCB_DSCP_ENABLE 1
|
|
u32 dscp_pri_map[8];
|
|
};
|
|
|
|
/**************************************
|
|
* Attributes commands
|
|
**************************************/
|
|
|
|
enum _attribute_commands_e {
|
|
ATTRIBUTE_CMD_READ = 0,
|
|
ATTRIBUTE_CMD_WRITE,
|
|
ATTRIBUTE_CMD_READ_CLEAR,
|
|
ATTRIBUTE_CMD_CLEAR,
|
|
ATTRIBUTE_NUM_OF_COMMANDS
|
|
};
|
|
|
|
/**************************************/
|
|
/* */
|
|
/* P U B L I C G L O B A L */
|
|
/* */
|
|
/**************************************/
|
|
struct public_global {
|
|
u32 max_path; /* 32bit is wasty, but this will be used often */
|
|
/* (Global) 32bit is wasty, but this will be used often */
|
|
u32 max_ports;
|
|
#define MODE_1P 1 /* TBD - NEED TO THINK OF A BETTER NAME */
|
|
#define MODE_2P 2
|
|
#define MODE_3P 3
|
|
#define MODE_4P 4
|
|
u32 debug_mb_offset;
|
|
u32 phymod_dbg_mb_offset;
|
|
struct couple_mode_teaming cmt;
|
|
/* Temperature in Celcius (-255C / +255C), measured every second. */
|
|
s32 internal_temperature;
|
|
u32 mfw_ver;
|
|
u32 running_bundle_id;
|
|
s32 external_temperature;
|
|
u32 mdump_reason;
|
|
#define MDUMP_REASON_INTERNAL_ERROR (1 << 0)
|
|
#define MDUMP_REASON_EXTERNAL_TRIGGER (1 << 1)
|
|
#define MDUMP_REASON_DUMP_AGED (1 << 2)
|
|
u32 ext_phy_upgrade_fw;
|
|
#define EXT_PHY_FW_UPGRADE_STATUS_MASK (0x0000ffff)
|
|
#define EXT_PHY_FW_UPGRADE_STATUS_OFFSET (0)
|
|
#define EXT_PHY_FW_UPGRADE_STATUS_IN_PROGRESS (1)
|
|
#define EXT_PHY_FW_UPGRADE_STATUS_FAILED (2)
|
|
#define EXT_PHY_FW_UPGRADE_STATUS_SUCCESS (3)
|
|
#define EXT_PHY_FW_UPGRADE_TYPE_MASK (0xffff0000)
|
|
#define EXT_PHY_FW_UPGRADE_TYPE_OFFSET (16)
|
|
};
|
|
|
|
/**************************************/
|
|
/* */
|
|
/* P U B L I C P A T H */
|
|
/* */
|
|
/**************************************/
|
|
|
|
/****************************************************************************
|
|
* Shared Memory 2 Region *
|
|
****************************************************************************/
|
|
/* The fw_flr_ack is actually built in the following way: */
|
|
/* 8 bit: PF ack */
|
|
/* 128 bit: VF ack */
|
|
/* 8 bit: ios_dis_ack */
|
|
/* In order to maintain endianity in the mailbox hsi, we want to keep using */
|
|
/* u32. The fw must have the VF right after the PF since this is how it */
|
|
/* access arrays(it expects always the VF to reside after the PF, and that */
|
|
/* makes the calculation much easier for it. ) */
|
|
/* In order to answer both limitations, and keep the struct small, the code */
|
|
/* will abuse the structure defined here to achieve the actual partition */
|
|
/* above */
|
|
/****************************************************************************/
|
|
struct fw_flr_mb {
|
|
u32 aggint;
|
|
u32 opgen_addr;
|
|
u32 accum_ack; /* 0..15:PF, 16..207:VF, 256..271:IOV_DIS */
|
|
#define ACCUM_ACK_PF_BASE 0
|
|
#define ACCUM_ACK_PF_SHIFT 0
|
|
|
|
#define ACCUM_ACK_VF_BASE 8
|
|
#define ACCUM_ACK_VF_SHIFT 3
|
|
|
|
#define ACCUM_ACK_IOV_DIS_BASE 256
|
|
#define ACCUM_ACK_IOV_DIS_SHIFT 8
|
|
|
|
};
|
|
|
|
struct public_path {
|
|
struct fw_flr_mb flr_mb;
|
|
/*
|
|
* mcp_vf_disabled is set by the MCP to indicate the driver about VFs
|
|
* which were disabled/flred
|
|
*/
|
|
u32 mcp_vf_disabled[VF_MAX_STATIC / 32]; /* 0x003c */
|
|
|
|
/* Reset on mcp reset, and incremented for eveny process kill event. */
|
|
u32 process_kill;
|
|
#define PROCESS_KILL_COUNTER_MASK 0x0000ffff
|
|
#define PROCESS_KILL_COUNTER_OFFSET 0
|
|
#define PROCESS_KILL_GLOB_AEU_BIT_MASK 0xffff0000
|
|
#define PROCESS_KILL_GLOB_AEU_BIT_OFFSET 16
|
|
#define GLOBAL_AEU_BIT(aeu_reg_id, aeu_bit) (aeu_reg_id * 32 + aeu_bit)
|
|
};
|
|
|
|
/**************************************/
|
|
/* */
|
|
/* P U B L I C P O R T */
|
|
/* */
|
|
/**************************************/
|
|
#define FC_NPIV_WWPN_SIZE 8
|
|
#define FC_NPIV_WWNN_SIZE 8
|
|
struct dci_npiv_settings {
|
|
u8 npiv_wwpn[FC_NPIV_WWPN_SIZE];
|
|
u8 npiv_wwnn[FC_NPIV_WWNN_SIZE];
|
|
};
|
|
|
|
struct dci_fc_npiv_cfg {
|
|
/* hdr used internally by the MFW */
|
|
u32 hdr;
|
|
u32 num_of_npiv;
|
|
};
|
|
|
|
#define MAX_NUMBER_NPIV 64
|
|
struct dci_fc_npiv_tbl {
|
|
struct dci_fc_npiv_cfg fc_npiv_cfg;
|
|
struct dci_npiv_settings settings[MAX_NUMBER_NPIV];
|
|
};
|
|
|
|
/****************************************************************************
|
|
* Driver <-> FW Mailbox *
|
|
****************************************************************************/
|
|
|
|
struct public_port {
|
|
u32 validity_map; /* 0x0 (4*2 = 0x8) */
|
|
|
|
/* validity bits */
|
|
#define MCP_VALIDITY_PCI_CFG 0x00100000
|
|
#define MCP_VALIDITY_MB 0x00200000
|
|
#define MCP_VALIDITY_DEV_INFO 0x00400000
|
|
#define MCP_VALIDITY_RESERVED 0x00000007
|
|
|
|
/* One licensing bit should be set */
|
|
/* yaniv - tbd ? license */
|
|
#define MCP_VALIDITY_LIC_KEY_IN_EFFECT_MASK 0x00000038
|
|
#define MCP_VALIDITY_LIC_MANUF_KEY_IN_EFFECT 0x00000008
|
|
#define MCP_VALIDITY_LIC_UPGRADE_KEY_IN_EFFECT 0x00000010
|
|
#define MCP_VALIDITY_LIC_NO_KEY_IN_EFFECT 0x00000020
|
|
|
|
/* Active MFW */
|
|
#define MCP_VALIDITY_ACTIVE_MFW_UNKNOWN 0x00000000
|
|
#define MCP_VALIDITY_ACTIVE_MFW_MASK 0x000001c0
|
|
#define MCP_VALIDITY_ACTIVE_MFW_NCSI 0x00000040
|
|
#define MCP_VALIDITY_ACTIVE_MFW_NONE 0x000001c0
|
|
|
|
u32 link_status;
|
|
#define LINK_STATUS_LINK_UP 0x00000001
|
|
#define LINK_STATUS_SPEED_AND_DUPLEX_MASK 0x0000001e
|
|
#define LINK_STATUS_SPEED_AND_DUPLEX_1000THD (1 << 1)
|
|
#define LINK_STATUS_SPEED_AND_DUPLEX_1000TFD (2 << 1)
|
|
#define LINK_STATUS_SPEED_AND_DUPLEX_10G (3 << 1)
|
|
#define LINK_STATUS_SPEED_AND_DUPLEX_20G (4 << 1)
|
|
#define LINK_STATUS_SPEED_AND_DUPLEX_40G (5 << 1)
|
|
#define LINK_STATUS_SPEED_AND_DUPLEX_50G (6 << 1)
|
|
#define LINK_STATUS_SPEED_AND_DUPLEX_100G (7 << 1)
|
|
#define LINK_STATUS_SPEED_AND_DUPLEX_25G (8 << 1)
|
|
#define LINK_STATUS_AUTO_NEGOTIATE_ENABLED 0x00000020
|
|
#define LINK_STATUS_AUTO_NEGOTIATE_COMPLETE 0x00000040
|
|
#define LINK_STATUS_PARALLEL_DETECTION_USED 0x00000080
|
|
#define LINK_STATUS_PFC_ENABLED 0x00000100
|
|
#define LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE 0x00000200
|
|
#define LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE 0x00000400
|
|
#define LINK_STATUS_LINK_PARTNER_10G_CAPABLE 0x00000800
|
|
#define LINK_STATUS_LINK_PARTNER_20G_CAPABLE 0x00001000
|
|
#define LINK_STATUS_LINK_PARTNER_40G_CAPABLE 0x00002000
|
|
#define LINK_STATUS_LINK_PARTNER_50G_CAPABLE 0x00004000
|
|
#define LINK_STATUS_LINK_PARTNER_100G_CAPABLE 0x00008000
|
|
#define LINK_STATUS_LINK_PARTNER_25G_CAPABLE 0x00010000
|
|
#define LINK_STATUS_LINK_PARTNER_FLOW_CONTROL_MASK 0x000C0000
|
|
#define LINK_STATUS_LINK_PARTNER_NOT_PAUSE_CAPABLE (0 << 18)
|
|
#define LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE (1 << 18)
|
|
#define LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE (2 << 18)
|
|
#define LINK_STATUS_LINK_PARTNER_BOTH_PAUSE (3 << 18)
|
|
#define LINK_STATUS_SFP_TX_FAULT 0x00100000
|
|
#define LINK_STATUS_TX_FLOW_CONTROL_ENABLED 0x00200000
|
|
#define LINK_STATUS_RX_FLOW_CONTROL_ENABLED 0x00400000
|
|
#define LINK_STATUS_RX_SIGNAL_PRESENT 0x00800000
|
|
#define LINK_STATUS_MAC_LOCAL_FAULT 0x01000000
|
|
#define LINK_STATUS_MAC_REMOTE_FAULT 0x02000000
|
|
#define LINK_STATUS_UNSUPPORTED_SPD_REQ 0x04000000
|
|
#define LINK_STATUS_FEC_MODE_MASK 0x38000000
|
|
#define LINK_STATUS_FEC_MODE_NONE (0 << 27)
|
|
#define LINK_STATUS_FEC_MODE_FIRECODE_CL74 (1 << 27)
|
|
#define LINK_STATUS_FEC_MODE_RS_CL91 (2 << 27)
|
|
#define LINK_STATUS_EXT_PHY_LINK_UP 0x40000000
|
|
|
|
u32 link_status1;
|
|
u32 ext_phy_fw_version;
|
|
/* Points to struct eth_phy_cfg (For READ-ONLY) */
|
|
u32 drv_phy_cfg_addr;
|
|
|
|
u32 port_stx;
|
|
|
|
u32 stat_nig_timer;
|
|
|
|
struct port_mf_cfg port_mf_config;
|
|
struct port_stats stats;
|
|
|
|
u32 media_type;
|
|
#define MEDIA_UNSPECIFIED 0x0
|
|
#define MEDIA_SFPP_10G_FIBER 0x1 /* Use MEDIA_MODULE_FIBER instead */
|
|
#define MEDIA_XFP_FIBER 0x2 /* Use MEDIA_MODULE_FIBER instead */
|
|
#define MEDIA_DA_TWINAX 0x3
|
|
#define MEDIA_BASE_T 0x4
|
|
#define MEDIA_SFP_1G_FIBER 0x5 /* Use MEDIA_MODULE_FIBER instead */
|
|
#define MEDIA_MODULE_FIBER 0x6
|
|
#define MEDIA_KR 0xf0
|
|
#define MEDIA_NOT_PRESENT 0xff
|
|
|
|
u32 lfa_status;
|
|
#define LFA_LINK_FLAP_REASON_OFFSET 0
|
|
#define LFA_LINK_FLAP_REASON_MASK 0x000000ff
|
|
#define LFA_NO_REASON (0 << 0)
|
|
#define LFA_LINK_DOWN (1 << 0)
|
|
#define LFA_FORCE_INIT (1 << 1)
|
|
#define LFA_LOOPBACK_MISMATCH (1 << 2)
|
|
#define LFA_SPEED_MISMATCH (1 << 3)
|
|
#define LFA_FLOW_CTRL_MISMATCH (1 << 4)
|
|
#define LFA_ADV_SPEED_MISMATCH (1 << 5)
|
|
#define LFA_EEE_MISMATCH (1 << 6)
|
|
#define LFA_LINK_MODES_MISMATCH (1 << 7)
|
|
#define LINK_FLAP_AVOIDANCE_COUNT_OFFSET 8
|
|
#define LINK_FLAP_AVOIDANCE_COUNT_MASK 0x0000ff00
|
|
#define LINK_FLAP_COUNT_OFFSET 16
|
|
#define LINK_FLAP_COUNT_MASK 0x00ff0000
|
|
|
|
u32 link_change_count;
|
|
|
|
/* LLDP params */
|
|
/* offset: 536 bytes? */
|
|
struct lldp_config_params_s lldp_config_params[LLDP_MAX_LLDP_AGENTS];
|
|
struct lldp_status_params_s lldp_status_params[LLDP_MAX_LLDP_AGENTS];
|
|
struct lldp_system_tlvs_buffer_s system_lldp_tlvs_buf;
|
|
|
|
/* DCBX related MIB */
|
|
struct dcbx_local_params local_admin_dcbx_mib;
|
|
struct dcbx_mib remote_dcbx_mib;
|
|
struct dcbx_mib operational_dcbx_mib;
|
|
|
|
/* FC_NPIV table offset & size in NVRAM value of 0 means not present */
|
|
|
|
u32 fc_npiv_nvram_tbl_addr;
|
|
u32 fc_npiv_nvram_tbl_size;
|
|
u32 transceiver_data;
|
|
#define ETH_TRANSCEIVER_STATE_MASK 0x000000FF
|
|
#define ETH_TRANSCEIVER_STATE_OFFSET 0x00000000
|
|
#define ETH_TRANSCEIVER_STATE_UNPLUGGED 0x00000000
|
|
#define ETH_TRANSCEIVER_STATE_PRESENT 0x00000001
|
|
#define ETH_TRANSCEIVER_STATE_VALID 0x00000003
|
|
#define ETH_TRANSCEIVER_STATE_UPDATING 0x00000008
|
|
#define ETH_TRANSCEIVER_TYPE_MASK 0x0000FF00
|
|
#define ETH_TRANSCEIVER_TYPE_OFFSET 0x00000008
|
|
#define ETH_TRANSCEIVER_TYPE_NONE 0x00000000
|
|
#define ETH_TRANSCEIVER_TYPE_UNKNOWN 0x000000FF
|
|
/* 1G Passive copper cable */
|
|
#define ETH_TRANSCEIVER_TYPE_1G_PCC 0x01
|
|
/* 1G Active copper cable */
|
|
#define ETH_TRANSCEIVER_TYPE_1G_ACC 0x02
|
|
#define ETH_TRANSCEIVER_TYPE_1G_LX 0x03
|
|
#define ETH_TRANSCEIVER_TYPE_1G_SX 0x04
|
|
#define ETH_TRANSCEIVER_TYPE_10G_SR 0x05
|
|
#define ETH_TRANSCEIVER_TYPE_10G_LR 0x06
|
|
#define ETH_TRANSCEIVER_TYPE_10G_LRM 0x07
|
|
#define ETH_TRANSCEIVER_TYPE_10G_ER 0x08
|
|
/* 10G Passive copper cable */
|
|
#define ETH_TRANSCEIVER_TYPE_10G_PCC 0x09
|
|
/* 10G Active copper cable */
|
|
#define ETH_TRANSCEIVER_TYPE_10G_ACC 0x0a
|
|
#define ETH_TRANSCEIVER_TYPE_XLPPI 0x0b
|
|
#define ETH_TRANSCEIVER_TYPE_40G_LR4 0x0c
|
|
#define ETH_TRANSCEIVER_TYPE_40G_SR4 0x0d
|
|
#define ETH_TRANSCEIVER_TYPE_40G_CR4 0x0e
|
|
/* Active optical cable */
|
|
#define ETH_TRANSCEIVER_TYPE_100G_AOC 0x0f
|
|
#define ETH_TRANSCEIVER_TYPE_100G_SR4 0x10
|
|
#define ETH_TRANSCEIVER_TYPE_100G_LR4 0x11
|
|
#define ETH_TRANSCEIVER_TYPE_100G_ER4 0x12
|
|
/* Active copper cable */
|
|
#define ETH_TRANSCEIVER_TYPE_100G_ACC 0x13
|
|
#define ETH_TRANSCEIVER_TYPE_100G_CR4 0x14
|
|
#define ETH_TRANSCEIVER_TYPE_4x10G_SR 0x15
|
|
/* 25G Passive copper cable - short */
|
|
#define ETH_TRANSCEIVER_TYPE_25G_CA_N 0x16
|
|
/* 25G Active copper cable - short */
|
|
#define ETH_TRANSCEIVER_TYPE_25G_ACC_S 0x17
|
|
/* 25G Passive copper cable - medium */
|
|
#define ETH_TRANSCEIVER_TYPE_25G_CA_S 0x18
|
|
/* 25G Active copper cable - medium */
|
|
#define ETH_TRANSCEIVER_TYPE_25G_ACC_M 0x19
|
|
/* 25G Passive copper cable - long */
|
|
#define ETH_TRANSCEIVER_TYPE_25G_CA_L 0x1a
|
|
/* 25G Active copper cable - long */
|
|
#define ETH_TRANSCEIVER_TYPE_25G_ACC_L 0x1b
|
|
#define ETH_TRANSCEIVER_TYPE_25G_SR 0x1c
|
|
#define ETH_TRANSCEIVER_TYPE_25G_LR 0x1d
|
|
#define ETH_TRANSCEIVER_TYPE_25G_AOC 0x1e
|
|
|
|
#define ETH_TRANSCEIVER_TYPE_4x10G 0x1f
|
|
#define ETH_TRANSCEIVER_TYPE_4x25G_CR 0x20
|
|
#define ETH_TRANSCEIVER_TYPE_1000BASET 0x21
|
|
#define ETH_TRANSCEIVER_TYPE_10G_BASET 0x22
|
|
#define ETH_TRANSCEIVER_TYPE_MULTI_RATE_10G_40G_SR 0x30
|
|
#define ETH_TRANSCEIVER_TYPE_MULTI_RATE_10G_40G_CR 0x31
|
|
#define ETH_TRANSCEIVER_TYPE_MULTI_RATE_10G_40G_LR 0x32
|
|
#define ETH_TRANSCEIVER_TYPE_MULTI_RATE_40G_100G_SR 0x33
|
|
#define ETH_TRANSCEIVER_TYPE_MULTI_RATE_40G_100G_CR 0x34
|
|
#define ETH_TRANSCEIVER_TYPE_MULTI_RATE_40G_100G_LR 0x35
|
|
#define ETH_TRANSCEIVER_TYPE_MULTI_RATE_40G_100G_AOC 0x36
|
|
u32 wol_info;
|
|
u32 wol_pkt_len;
|
|
u32 wol_pkt_details;
|
|
struct dcb_dscp_map dcb_dscp_map;
|
|
|
|
u32 eee_status;
|
|
/* Set when EEE negotiation is complete. */
|
|
#define EEE_ACTIVE_BIT (1 << 0)
|
|
|
|
/* Shows the Local Device EEE capabilities */
|
|
#define EEE_LD_ADV_STATUS_MASK 0x000000f0
|
|
#define EEE_LD_ADV_STATUS_OFFSET 4
|
|
#define EEE_1G_ADV (1 << 1)
|
|
#define EEE_10G_ADV (1 << 2)
|
|
/* Same values as in EEE_LD_ADV, but for Link Parter */
|
|
#define EEE_LP_ADV_STATUS_MASK 0x00000f00
|
|
#define EEE_LP_ADV_STATUS_OFFSET 8
|
|
|
|
/* Supported speeds for EEE */
|
|
#define EEE_SUPPORTED_SPEED_MASK 0x0000f000
|
|
#define EEE_SUPPORTED_SPEED_OFFSET 12
|
|
#define EEE_1G_SUPPORTED (1 << 1)
|
|
#define EEE_10G_SUPPORTED (1 << 2)
|
|
|
|
u32 eee_remote; /* Used for EEE in LLDP */
|
|
#define EEE_REMOTE_TW_TX_MASK 0x0000ffff
|
|
#define EEE_REMOTE_TW_TX_OFFSET 0
|
|
#define EEE_REMOTE_TW_RX_MASK 0xffff0000
|
|
#define EEE_REMOTE_TW_RX_OFFSET 16
|
|
|
|
u32 module_info;
|
|
#define ETH_TRANSCEIVER_MONITORING_TYPE_MASK 0x000000FF
|
|
#define ETH_TRANSCEIVER_MONITORING_TYPE_OFFSET 0
|
|
#define ETH_TRANSCEIVER_ADDR_CHNG_REQUIRED (1 << 2)
|
|
#define ETH_TRANSCEIVER_RCV_PWR_MEASURE_TYPE (1 << 3)
|
|
#define ETH_TRANSCEIVER_EXTERNALLY_CALIBRATED (1 << 4)
|
|
#define ETH_TRANSCEIVER_INTERNALLY_CALIBRATED (1 << 5)
|
|
#define ETH_TRANSCEIVER_HAS_DIAGNOSTIC (1 << 6)
|
|
#define ETH_TRANSCEIVER_IDENT_MASK 0x0000ff00
|
|
#define ETH_TRANSCEIVER_IDENT_OFFSET 8
|
|
|
|
u32 oem_cfg_port;
|
|
#define OEM_CFG_CHANNEL_TYPE_MASK 0x00000003
|
|
#define OEM_CFG_CHANNEL_TYPE_OFFSET 0
|
|
#define OEM_CFG_CHANNEL_TYPE_VLAN_PARTITION 0x1
|
|
#define OEM_CFG_CHANNEL_TYPE_STAGGED 0x2
|
|
|
|
#define OEM_CFG_SCHED_TYPE_MASK 0x0000000C
|
|
#define OEM_CFG_SCHED_TYPE_OFFSET 2
|
|
#define OEM_CFG_SCHED_TYPE_ETS 0x1
|
|
#define OEM_CFG_SCHED_TYPE_VNIC_BW 0x2
|
|
|
|
struct lldp_received_tlvs_s lldp_received_tlvs[LLDP_MAX_LLDP_AGENTS];
|
|
u32 system_lldp_tlvs_buf2[MAX_SYSTEM_LLDP_TLV_DATA];
|
|
};
|
|
|
|
/**************************************/
|
|
/* */
|
|
/* P U B L I C F U N C */
|
|
/* */
|
|
/**************************************/
|
|
|
|
struct public_func {
|
|
u32 iscsi_boot_signature;
|
|
u32 iscsi_boot_block_offset;
|
|
|
|
/* MTU size per funciton is needed for the OV feature */
|
|
u32 mtu_size;
|
|
/* 9 entires for the C2S PCP map for each inner VLAN PCP + 1 default */
|
|
|
|
/* For PCP values 0-3 use the map lower */
|
|
/* 0xFF000000 - PCP 0, 0x00FF0000 - PCP 1,
|
|
* 0x0000FF00 - PCP 2, 0x000000FF PCP 3
|
|
*/
|
|
u32 c2s_pcp_map_lower;
|
|
/* For PCP values 4-7 use the map upper */
|
|
/* 0xFF000000 - PCP 4, 0x00FF0000 - PCP 5,
|
|
* 0x0000FF00 - PCP 6, 0x000000FF PCP 7
|
|
*/
|
|
u32 c2s_pcp_map_upper;
|
|
|
|
/* For PCP default value get the MSB byte of the map default */
|
|
u32 c2s_pcp_map_default;
|
|
|
|
u32 reserved[4];
|
|
|
|
/* replace old mf_cfg */
|
|
u32 config;
|
|
/* E/R/I/D */
|
|
/* function 0 of each port cannot be hidden */
|
|
#define FUNC_MF_CFG_FUNC_HIDE 0x00000001
|
|
#define FUNC_MF_CFG_PAUSE_ON_HOST_RING 0x00000002
|
|
#define FUNC_MF_CFG_PAUSE_ON_HOST_RING_OFFSET 0x00000001
|
|
|
|
|
|
#define FUNC_MF_CFG_PROTOCOL_MASK 0x000000f0
|
|
#define FUNC_MF_CFG_PROTOCOL_OFFSET 4
|
|
#define FUNC_MF_CFG_PROTOCOL_ETHERNET 0x00000000
|
|
#define FUNC_MF_CFG_PROTOCOL_ISCSI 0x00000010
|
|
#define FUNC_MF_CFG_PROTOCOL_FCOE 0x00000020
|
|
#define FUNC_MF_CFG_PROTOCOL_ROCE 0x00000030
|
|
#define FUNC_MF_CFG_PROTOCOL_MAX 0x00000030
|
|
|
|
/* MINBW, MAXBW */
|
|
/* value range - 0..100, increments in 1 % */
|
|
#define FUNC_MF_CFG_MIN_BW_MASK 0x0000ff00
|
|
#define FUNC_MF_CFG_MIN_BW_OFFSET 8
|
|
#define FUNC_MF_CFG_MIN_BW_DEFAULT 0x00000000
|
|
#define FUNC_MF_CFG_MAX_BW_MASK 0x00ff0000
|
|
#define FUNC_MF_CFG_MAX_BW_OFFSET 16
|
|
#define FUNC_MF_CFG_MAX_BW_DEFAULT 0x00640000
|
|
|
|
u32 status;
|
|
#define FUNC_STATUS_VIRTUAL_LINK_UP 0x00000001
|
|
#define FUNC_STATUS_LOGICAL_LINK_UP 0x00000002
|
|
#define FUNC_STATUS_FORCED_LINK 0x00000004
|
|
|
|
u32 mac_upper; /* MAC */
|
|
#define FUNC_MF_CFG_UPPERMAC_MASK 0x0000ffff
|
|
#define FUNC_MF_CFG_UPPERMAC_OFFSET 0
|
|
#define FUNC_MF_CFG_UPPERMAC_DEFAULT FUNC_MF_CFG_UPPERMAC_MASK
|
|
u32 mac_lower;
|
|
#define FUNC_MF_CFG_LOWERMAC_DEFAULT 0xffffffff
|
|
|
|
u32 fcoe_wwn_port_name_upper;
|
|
u32 fcoe_wwn_port_name_lower;
|
|
|
|
u32 fcoe_wwn_node_name_upper;
|
|
u32 fcoe_wwn_node_name_lower;
|
|
|
|
u32 ovlan_stag; /* tags */
|
|
#define FUNC_MF_CFG_OV_STAG_MASK 0x0000ffff
|
|
#define FUNC_MF_CFG_OV_STAG_OFFSET 0
|
|
#define FUNC_MF_CFG_OV_STAG_DEFAULT FUNC_MF_CFG_OV_STAG_MASK
|
|
|
|
u32 pf_allocation; /* vf per pf */
|
|
|
|
u32 preserve_data; /* Will be used bt CCM */
|
|
|
|
u32 driver_last_activity_ts;
|
|
|
|
/*
|
|
* drv_ack_vf_disabled is set by the PF driver to ack handled disabled
|
|
* VFs
|
|
*/
|
|
u32 drv_ack_vf_disabled[VF_MAX_STATIC / 32]; /* 0x0044 */
|
|
|
|
u32 drv_id;
|
|
#define DRV_ID_PDA_COMP_VER_MASK 0x0000ffff
|
|
#define DRV_ID_PDA_COMP_VER_OFFSET 0
|
|
|
|
#define LOAD_REQ_HSI_VERSION 2
|
|
#define DRV_ID_MCP_HSI_VER_MASK 0x00ff0000
|
|
#define DRV_ID_MCP_HSI_VER_OFFSET 16
|
|
#define DRV_ID_MCP_HSI_VER_CURRENT (LOAD_REQ_HSI_VERSION << \
|
|
DRV_ID_MCP_HSI_VER_OFFSET)
|
|
|
|
#define DRV_ID_DRV_TYPE_MASK 0x7f000000
|
|
#define DRV_ID_DRV_TYPE_OFFSET 24
|
|
#define DRV_ID_DRV_TYPE_UNKNOWN (0 << DRV_ID_DRV_TYPE_OFFSET)
|
|
#define DRV_ID_DRV_TYPE_LINUX (1 << DRV_ID_DRV_TYPE_OFFSET)
|
|
#define DRV_ID_DRV_TYPE_WINDOWS (2 << DRV_ID_DRV_TYPE_OFFSET)
|
|
#define DRV_ID_DRV_TYPE_DIAG (3 << DRV_ID_DRV_TYPE_OFFSET)
|
|
#define DRV_ID_DRV_TYPE_PREBOOT (4 << DRV_ID_DRV_TYPE_OFFSET)
|
|
#define DRV_ID_DRV_TYPE_SOLARIS (5 << DRV_ID_DRV_TYPE_OFFSET)
|
|
#define DRV_ID_DRV_TYPE_VMWARE (6 << DRV_ID_DRV_TYPE_OFFSET)
|
|
#define DRV_ID_DRV_TYPE_FREEBSD (7 << DRV_ID_DRV_TYPE_OFFSET)
|
|
#define DRV_ID_DRV_TYPE_AIX (8 << DRV_ID_DRV_TYPE_OFFSET)
|
|
|
|
#define DRV_ID_DRV_INIT_HW_MASK 0x80000000
|
|
#define DRV_ID_DRV_INIT_HW_OFFSET 31
|
|
#define DRV_ID_DRV_INIT_HW_FLAG (1 << DRV_ID_DRV_INIT_HW_OFFSET)
|
|
|
|
u32 oem_cfg_func;
|
|
#define OEM_CFG_FUNC_TC_MASK 0x0000000F
|
|
#define OEM_CFG_FUNC_TC_OFFSET 0
|
|
#define OEM_CFG_FUNC_TC_0 0x0
|
|
#define OEM_CFG_FUNC_TC_1 0x1
|
|
#define OEM_CFG_FUNC_TC_2 0x2
|
|
#define OEM_CFG_FUNC_TC_3 0x3
|
|
#define OEM_CFG_FUNC_TC_4 0x4
|
|
#define OEM_CFG_FUNC_TC_5 0x5
|
|
#define OEM_CFG_FUNC_TC_6 0x6
|
|
#define OEM_CFG_FUNC_TC_7 0x7
|
|
|
|
#define OEM_CFG_FUNC_HOST_PRI_CTRL_MASK 0x00000030
|
|
#define OEM_CFG_FUNC_HOST_PRI_CTRL_OFFSET 4
|
|
#define OEM_CFG_FUNC_HOST_PRI_CTRL_VNIC 0x1
|
|
#define OEM_CFG_FUNC_HOST_PRI_CTRL_OS 0x2
|
|
};
|
|
|
|
/**************************************/
|
|
/* */
|
|
/* P U B L I C M B */
|
|
/* */
|
|
/**************************************/
|
|
/* This is the only section that the driver can write to, and each */
|
|
/* Basically each driver request to set feature parameters,
|
|
* will be done using a different command, which will be linked
|
|
* to a specific data structure from the union below.
|
|
* For huge strucuture, the common blank structure should be used.
|
|
*/
|
|
|
|
struct mcp_mac {
|
|
u32 mac_upper; /* Upper 16 bits are always zeroes */
|
|
u32 mac_lower;
|
|
};
|
|
|
|
struct mcp_val64 {
|
|
u32 lo;
|
|
u32 hi;
|
|
};
|
|
|
|
struct mcp_file_att {
|
|
u32 nvm_start_addr;
|
|
u32 len;
|
|
};
|
|
|
|
struct bist_nvm_image_att {
|
|
u32 return_code;
|
|
u32 image_type; /* Image type */
|
|
u32 nvm_start_addr; /* NVM address of the image */
|
|
u32 len; /* Include CRC */
|
|
};
|
|
|
|
#define MCP_DRV_VER_STR_SIZE 16
|
|
#define MCP_DRV_VER_STR_SIZE_DWORD (MCP_DRV_VER_STR_SIZE / sizeof(u32))
|
|
#define MCP_DRV_NVM_BUF_LEN 32
|
|
struct drv_version_stc {
|
|
u32 version;
|
|
u8 name[MCP_DRV_VER_STR_SIZE - 4];
|
|
};
|
|
|
|
/* statistics for ncsi */
|
|
struct lan_stats_stc {
|
|
u64 ucast_rx_pkts;
|
|
u64 ucast_tx_pkts;
|
|
u32 fcs_err;
|
|
u32 rserved;
|
|
};
|
|
|
|
struct fcoe_stats_stc {
|
|
u64 rx_pkts;
|
|
u64 tx_pkts;
|
|
u32 fcs_err;
|
|
u32 login_failure;
|
|
};
|
|
|
|
struct iscsi_stats_stc {
|
|
u64 rx_pdus;
|
|
u64 tx_pdus;
|
|
u64 rx_bytes;
|
|
u64 tx_bytes;
|
|
};
|
|
|
|
struct rdma_stats_stc {
|
|
u64 rx_pkts;
|
|
u64 tx_pkts;
|
|
u64 rx_bytes;
|
|
u64 tx_bytes;
|
|
};
|
|
|
|
struct ocbb_data_stc {
|
|
u32 ocbb_host_addr;
|
|
u32 ocsd_host_addr;
|
|
u32 ocsd_req_update_interval;
|
|
};
|
|
|
|
#define MAX_NUM_OF_SENSORS 7
|
|
#define MFW_SENSOR_LOCATION_INTERNAL 1
|
|
#define MFW_SENSOR_LOCATION_EXTERNAL 2
|
|
#define MFW_SENSOR_LOCATION_SFP 3
|
|
|
|
#define SENSOR_LOCATION_OFFSET 0
|
|
#define SENSOR_LOCATION_MASK 0x000000ff
|
|
#define THRESHOLD_HIGH_OFFSET 8
|
|
#define THRESHOLD_HIGH_MASK 0x0000ff00
|
|
#define CRITICAL_TEMPERATURE_OFFSET 16
|
|
#define CRITICAL_TEMPERATURE_MASK 0x00ff0000
|
|
#define CURRENT_TEMP_OFFSET 24
|
|
#define CURRENT_TEMP_MASK 0xff000000
|
|
struct temperature_status_stc {
|
|
u32 num_of_sensors;
|
|
u32 sensor[MAX_NUM_OF_SENSORS];
|
|
};
|
|
|
|
/* crash dump configuration header */
|
|
struct mdump_config_stc {
|
|
u32 version;
|
|
u32 config;
|
|
u32 epoc;
|
|
u32 num_of_logs;
|
|
u32 valid_logs;
|
|
};
|
|
|
|
enum resource_id_enum {
|
|
RESOURCE_NUM_SB_E = 0,
|
|
RESOURCE_NUM_L2_QUEUE_E = 1,
|
|
RESOURCE_NUM_VPORT_E = 2,
|
|
RESOURCE_NUM_VMQ_E = 3,
|
|
/* Not a real resource!! it's a factor used to calculate others */
|
|
RESOURCE_FACTOR_NUM_RSS_PF_E = 4,
|
|
/* Not a real resource!! it's a factor used to calculate others */
|
|
RESOURCE_FACTOR_RSS_PER_VF_E = 5,
|
|
RESOURCE_NUM_RL_E = 6,
|
|
RESOURCE_NUM_PQ_E = 7,
|
|
RESOURCE_NUM_VF_E = 8,
|
|
RESOURCE_VFC_FILTER_E = 9,
|
|
RESOURCE_ILT_E = 10,
|
|
RESOURCE_CQS_E = 11,
|
|
RESOURCE_GFT_PROFILES_E = 12,
|
|
RESOURCE_NUM_TC_E = 13,
|
|
RESOURCE_NUM_RSS_ENGINES_E = 14,
|
|
RESOURCE_LL2_QUEUE_E = 15,
|
|
RESOURCE_RDMA_STATS_QUEUE_E = 16,
|
|
RESOURCE_BDQ_E = 17,
|
|
RESOURCE_MAX_NUM,
|
|
RESOURCE_NUM_INVALID = 0xFFFFFFFF
|
|
};
|
|
|
|
/* Resource ID is to be filled by the driver in the MB request
|
|
* Size, offset & flags to be filled by the MFW in the MB response
|
|
*/
|
|
struct resource_info {
|
|
enum resource_id_enum res_id;
|
|
u32 size; /* number of allocated resources */
|
|
u32 offset; /* Offset of the 1st resource */
|
|
u32 vf_size;
|
|
u32 vf_offset;
|
|
u32 flags;
|
|
#define RESOURCE_ELEMENT_STRICT (1 << 0)
|
|
};
|
|
|
|
#define DRV_ROLE_NONE 0
|
|
#define DRV_ROLE_PREBOOT 1
|
|
#define DRV_ROLE_OS 2
|
|
#define DRV_ROLE_KDUMP 3
|
|
|
|
struct load_req_stc {
|
|
u32 drv_ver_0;
|
|
u32 drv_ver_1;
|
|
u32 fw_ver;
|
|
u32 misc0;
|
|
#define LOAD_REQ_ROLE_MASK 0x000000FF
|
|
#define LOAD_REQ_ROLE_OFFSET 0
|
|
#define LOAD_REQ_LOCK_TO_MASK 0x0000FF00
|
|
#define LOAD_REQ_LOCK_TO_OFFSET 8
|
|
#define LOAD_REQ_LOCK_TO_DEFAULT 0
|
|
#define LOAD_REQ_LOCK_TO_NONE 255
|
|
#define LOAD_REQ_FORCE_MASK 0x000F0000
|
|
#define LOAD_REQ_FORCE_OFFSET 16
|
|
#define LOAD_REQ_FORCE_NONE 0
|
|
#define LOAD_REQ_FORCE_PF 1
|
|
#define LOAD_REQ_FORCE_ALL 2
|
|
#define LOAD_REQ_FLAGS0_MASK 0x00F00000
|
|
#define LOAD_REQ_FLAGS0_OFFSET 20
|
|
#define LOAD_REQ_FLAGS0_AVOID_RESET (0x1 << 0)
|
|
};
|
|
|
|
struct load_rsp_stc {
|
|
u32 drv_ver_0;
|
|
u32 drv_ver_1;
|
|
u32 fw_ver;
|
|
u32 misc0;
|
|
#define LOAD_RSP_ROLE_MASK 0x000000FF
|
|
#define LOAD_RSP_ROLE_OFFSET 0
|
|
#define LOAD_RSP_HSI_MASK 0x0000FF00
|
|
#define LOAD_RSP_HSI_OFFSET 8
|
|
#define LOAD_RSP_FLAGS0_MASK 0x000F0000
|
|
#define LOAD_RSP_FLAGS0_OFFSET 16
|
|
#define LOAD_RSP_FLAGS0_DRV_EXISTS (0x1 << 0)
|
|
};
|
|
|
|
struct mdump_retain_data_stc {
|
|
u32 valid;
|
|
u32 epoch;
|
|
u32 pf;
|
|
u32 status;
|
|
};
|
|
|
|
struct attribute_cmd_write_stc {
|
|
u32 val;
|
|
u32 mask;
|
|
u32 offset;
|
|
};
|
|
|
|
union drv_union_data {
|
|
struct mcp_mac wol_mac; /* UNLOAD_DONE */
|
|
|
|
/* This configuration should be set by the driver for the LINK_SET command. */
|
|
|
|
struct eth_phy_cfg drv_phy_cfg;
|
|
|
|
struct mcp_val64 val64; /* For PHY / AVS commands */
|
|
|
|
u8 raw_data[MCP_DRV_NVM_BUF_LEN];
|
|
|
|
struct mcp_file_att file_att;
|
|
|
|
u32 ack_vf_disabled[VF_MAX_STATIC / 32];
|
|
|
|
struct drv_version_stc drv_version;
|
|
|
|
struct lan_stats_stc lan_stats;
|
|
struct fcoe_stats_stc fcoe_stats;
|
|
struct iscsi_stats_stc iscsi_stats;
|
|
struct rdma_stats_stc rdma_stats;
|
|
struct ocbb_data_stc ocbb_info;
|
|
struct temperature_status_stc temp_info;
|
|
struct resource_info resource;
|
|
struct bist_nvm_image_att nvm_image_att;
|
|
struct mdump_config_stc mdump_config;
|
|
u32 dword;
|
|
|
|
struct load_req_stc load_req;
|
|
struct load_rsp_stc load_rsp;
|
|
struct mdump_retain_data_stc mdump_retain;
|
|
struct attribute_cmd_write_stc attribute_cmd_write;
|
|
/* ... */
|
|
};
|
|
|
|
struct public_drv_mb {
|
|
u32 drv_mb_header;
|
|
#define DRV_MSG_CODE_MASK 0xffff0000
|
|
#define DRV_MSG_CODE_LOAD_REQ 0x10000000
|
|
#define DRV_MSG_CODE_LOAD_DONE 0x11000000
|
|
#define DRV_MSG_CODE_INIT_HW 0x12000000
|
|
#define DRV_MSG_CODE_CANCEL_LOAD_REQ 0x13000000
|
|
#define DRV_MSG_CODE_UNLOAD_REQ 0x20000000
|
|
#define DRV_MSG_CODE_UNLOAD_DONE 0x21000000
|
|
#define DRV_MSG_CODE_INIT_PHY 0x22000000
|
|
/* Params - FORCE - Reinitialize the link regardless of LFA */
|
|
/* - DONT_CARE - Don't flap the link if up */
|
|
#define DRV_MSG_CODE_LINK_RESET 0x23000000
|
|
|
|
#define DRV_MSG_CODE_SET_LLDP 0x24000000
|
|
#define DRV_MSG_CODE_REGISTER_LLDP_TLVS_RX 0x24100000
|
|
#define DRV_MSG_CODE_SET_DCBX 0x25000000
|
|
/* OneView feature driver HSI*/
|
|
#define DRV_MSG_CODE_OV_UPDATE_CURR_CFG 0x26000000
|
|
#define DRV_MSG_CODE_OV_UPDATE_BUS_NUM 0x27000000
|
|
#define DRV_MSG_CODE_OV_UPDATE_BOOT_PROGRESS 0x28000000
|
|
#define DRV_MSG_CODE_OV_UPDATE_STORM_FW_VER 0x29000000
|
|
#define DRV_MSG_CODE_NIG_DRAIN 0x30000000
|
|
#define DRV_MSG_CODE_OV_UPDATE_DRIVER_STATE 0x31000000
|
|
#define DRV_MSG_CODE_BW_UPDATE_ACK 0x32000000
|
|
#define DRV_MSG_CODE_OV_UPDATE_MTU 0x33000000
|
|
/* DRV_MB Param: driver version supp, FW_MB param: MFW version supp,
|
|
* data: struct resource_info
|
|
*/
|
|
#define DRV_MSG_GET_RESOURCE_ALLOC_MSG 0x34000000
|
|
#define DRV_MSG_SET_RESOURCE_VALUE_MSG 0x35000000
|
|
#define DRV_MSG_CODE_OV_UPDATE_WOL 0x38000000
|
|
#define DRV_MSG_CODE_OV_UPDATE_ESWITCH_MODE 0x39000000
|
|
#define DRV_MSG_CODE_S_TAG_UPDATE_ACK 0x3b000000
|
|
#define DRV_MSG_CODE_OEM_UPDATE_FCOE_CVID 0x3c000000
|
|
#define DRV_MSG_CODE_OEM_UPDATE_FCOE_FABRIC_NAME 0x3d000000
|
|
#define DRV_MSG_CODE_OEM_UPDATE_BOOT_CFG 0x3e000000
|
|
#define DRV_MSG_CODE_OEM_RESET_TO_DEFAULT 0x3f000000
|
|
#define DRV_MSG_CODE_OV_GET_CURR_CFG 0x40000000
|
|
#define DRV_MSG_CODE_GET_OEM_UPDATES 0x41000000
|
|
|
|
/*deprecated don't use*/
|
|
#define DRV_MSG_CODE_INITIATE_FLR_DEPRECATED 0x02000000
|
|
#define DRV_MSG_CODE_INITIATE_PF_FLR 0x02010000
|
|
#define DRV_MSG_CODE_VF_DISABLED_DONE 0xc0000000
|
|
#define DRV_MSG_CODE_CFG_VF_MSIX 0xc0010000
|
|
#define DRV_MSG_CODE_CFG_PF_VFS_MSIX 0xc0020000
|
|
/* Param is either DRV_MB_PARAM_NVM_PUT_FILE_BEGIN_MFW/IMAGE */
|
|
#define DRV_MSG_CODE_NVM_PUT_FILE_BEGIN 0x00010000
|
|
/* Param should be set to the transaction size (up to 64 bytes) */
|
|
#define DRV_MSG_CODE_NVM_PUT_FILE_DATA 0x00020000
|
|
/* MFW will place the file offset and len in file_att struct */
|
|
#define DRV_MSG_CODE_NVM_GET_FILE_ATT 0x00030000
|
|
/* Read 32bytes of nvram data. Param is [0:23] ??? Offset [24:31] -
|
|
* ??? Len in Bytes
|
|
*/
|
|
#define DRV_MSG_CODE_NVM_READ_NVRAM 0x00050000
|
|
/* Writes up to 32Bytes to nvram. Param is [0:23] ??? Offset [24:31]
|
|
* ??? Len in Bytes. In case this address is in the range of secured file in
|
|
* secured mode, the operation will fail
|
|
*/
|
|
#define DRV_MSG_CODE_NVM_WRITE_NVRAM 0x00060000
|
|
/* Delete a file from nvram. Param is image_type. */
|
|
#define DRV_MSG_CODE_NVM_DEL_FILE 0x00080000
|
|
/* Reset MCP when no NVM operation is going on, and no drivers are loaded.
|
|
* In case operation succeed, MCP will not ack back.
|
|
*/
|
|
#define DRV_MSG_CODE_MCP_RESET 0x00090000
|
|
/* Temporary command to set secure mode, where the param is 0 (None secure) /
|
|
* 1 (Secure) / 2 (Full-Secure)
|
|
*/
|
|
#define DRV_MSG_CODE_SET_SECURE_MODE 0x000a0000
|
|
/* Param: [0:15] - Address, [16:18] - lane# (0/1/2/3 - for single lane,
|
|
* 4/5 - for dual lanes, 6 - for all lanes, [28] - PMD reg, [29] - select port,
|
|
* [30:31] - port
|
|
*/
|
|
#define DRV_MSG_CODE_PHY_RAW_READ 0x000b0000
|
|
/* Param: [0:15] - Address, [16:18] - lane# (0/1/2/3 - for single lane,
|
|
* 4/5 - for dual lanes, 6 - for all lanes, [28] - PMD reg, [29] - select port,
|
|
* [30:31] - port
|
|
*/
|
|
#define DRV_MSG_CODE_PHY_RAW_WRITE 0x000c0000
|
|
/* Param: [0:15] - Address, [30:31] - port */
|
|
#define DRV_MSG_CODE_PHY_CORE_READ 0x000d0000
|
|
/* Param: [0:15] - Address, [30:31] - port */
|
|
#define DRV_MSG_CODE_PHY_CORE_WRITE 0x000e0000
|
|
/* Param: [0:3] - version, [4:15] - name (null terminated) */
|
|
#define DRV_MSG_CODE_SET_VERSION 0x000f0000
|
|
/* Halts the MCP. To resume MCP, user will need to use
|
|
* MCP_REG_CPU_STATE/MCP_REG_CPU_MODE registers.
|
|
*/
|
|
#define DRV_MSG_CODE_MCP_HALT 0x00100000
|
|
/* Set virtual mac address, params [31:6] - reserved, [5:4] - type,
|
|
* [3:0] - func, drv_data[7:0] - MAC/WWNN/WWPN
|
|
*/
|
|
#define DRV_MSG_CODE_SET_VMAC 0x00110000
|
|
/* Set virtual mac address, params [31:6] - reserved, [5:4] - type,
|
|
* [3:0] - func, drv_data[7:0] - MAC/WWNN/WWPN
|
|
*/
|
|
#define DRV_MSG_CODE_GET_VMAC 0x00120000
|
|
#define DRV_MSG_CODE_VMAC_TYPE_OFFSET 4
|
|
#define DRV_MSG_CODE_VMAC_TYPE_MASK 0x30
|
|
#define DRV_MSG_CODE_VMAC_TYPE_MAC 1
|
|
#define DRV_MSG_CODE_VMAC_TYPE_WWNN 2
|
|
#define DRV_MSG_CODE_VMAC_TYPE_WWPN 3
|
|
/* Get statistics from pf, params [31:4] - reserved, [3:0] - stats type */
|
|
#define DRV_MSG_CODE_GET_STATS 0x00130000
|
|
#define DRV_MSG_CODE_STATS_TYPE_LAN 1
|
|
#define DRV_MSG_CODE_STATS_TYPE_FCOE 2
|
|
#define DRV_MSG_CODE_STATS_TYPE_ISCSI 3
|
|
#define DRV_MSG_CODE_STATS_TYPE_RDMA 4
|
|
/* Host shall provide buffer and size for MFW */
|
|
#define DRV_MSG_CODE_PMD_DIAG_DUMP 0x00140000
|
|
/* Host shall provide buffer and size for MFW */
|
|
#define DRV_MSG_CODE_PMD_DIAG_EYE 0x00150000
|
|
/* Param: [0:1] - Port, [2:7] - read size, [8:15] - I2C address,
|
|
* [16:31] - offset
|
|
*/
|
|
#define DRV_MSG_CODE_TRANSCEIVER_READ 0x00160000
|
|
/* Param: [0:1] - Port, [2:7] - write size, [8:15] - I2C address,
|
|
* [16:31] - offset
|
|
*/
|
|
#define DRV_MSG_CODE_TRANSCEIVER_WRITE 0x00170000
|
|
/* indicate OCBB related information */
|
|
#define DRV_MSG_CODE_OCBB_DATA 0x00180000
|
|
/* Set function BW, params[15:8] - min, params[7:0] - max */
|
|
#define DRV_MSG_CODE_SET_BW 0x00190000
|
|
#define BW_MAX_MASK 0x000000ff
|
|
#define BW_MAX_OFFSET 0
|
|
#define BW_MIN_MASK 0x0000ff00
|
|
#define BW_MIN_OFFSET 8
|
|
|
|
/* When param is set to 1, all parities will be masked(disabled). When params
|
|
* are set to 0, parities will be unmasked again.
|
|
*/
|
|
#define DRV_MSG_CODE_MASK_PARITIES 0x001a0000
|
|
/* param[0] - Simulate fan failure, param[1] - simulate over temp. */
|
|
#define DRV_MSG_CODE_INDUCE_FAILURE 0x001b0000
|
|
#define DRV_MSG_FAN_FAILURE_TYPE (1 << 0)
|
|
#define DRV_MSG_TEMPERATURE_FAILURE_TYPE (1 << 1)
|
|
/* Param: [0:15] - gpio number */
|
|
#define DRV_MSG_CODE_GPIO_READ 0x001c0000
|
|
/* Param: [0:15] - gpio number, [16:31] - gpio value */
|
|
#define DRV_MSG_CODE_GPIO_WRITE 0x001d0000
|
|
/* Param: [0:7] - test enum, [8:15] - image index, [16:31] - reserved */
|
|
#define DRV_MSG_CODE_BIST_TEST 0x001e0000
|
|
#define DRV_MSG_CODE_GET_TEMPERATURE 0x001f0000
|
|
|
|
/* Set LED mode params :0 operational, 1 LED turn ON, 2 LED turn OFF */
|
|
#define DRV_MSG_CODE_SET_LED_MODE 0x00200000
|
|
/* drv_data[7:0] - EPOC in seconds, drv_data[15:8] -
|
|
* driver version (MAJ MIN BUILD SUB)
|
|
*/
|
|
#define DRV_MSG_CODE_TIMESTAMP 0x00210000
|
|
/* This is an empty mailbox just return OK*/
|
|
#define DRV_MSG_CODE_EMPTY_MB 0x00220000
|
|
|
|
/* Param[0:4] - resource number (0-31), Param[5:7] - opcode,
|
|
* param[15:8] - age
|
|
*/
|
|
#define DRV_MSG_CODE_RESOURCE_CMD 0x00230000
|
|
|
|
#define RESOURCE_CMD_REQ_RESC_MASK 0x0000001F
|
|
#define RESOURCE_CMD_REQ_RESC_OFFSET 0
|
|
#define RESOURCE_CMD_REQ_OPCODE_MASK 0x000000E0
|
|
#define RESOURCE_CMD_REQ_OPCODE_OFFSET 5
|
|
/* request resource ownership with default aging */
|
|
#define RESOURCE_OPCODE_REQ 1
|
|
/* request resource ownership without aging */
|
|
#define RESOURCE_OPCODE_REQ_WO_AGING 2
|
|
/* request resource ownership with specific aging timer (in seconds) */
|
|
#define RESOURCE_OPCODE_REQ_W_AGING 3
|
|
#define RESOURCE_OPCODE_RELEASE 4 /* release resource */
|
|
/* force resource release */
|
|
#define RESOURCE_OPCODE_FORCE_RELEASE 5
|
|
#define RESOURCE_CMD_REQ_AGE_MASK 0x0000FF00
|
|
#define RESOURCE_CMD_REQ_AGE_OFFSET 8
|
|
|
|
#define RESOURCE_CMD_RSP_OWNER_MASK 0x000000FF
|
|
#define RESOURCE_CMD_RSP_OWNER_OFFSET 0
|
|
#define RESOURCE_CMD_RSP_OPCODE_MASK 0x00000700
|
|
#define RESOURCE_CMD_RSP_OPCODE_OFFSET 8
|
|
/* resource is free and granted to requester */
|
|
#define RESOURCE_OPCODE_GNT 1
|
|
/* resource is busy, param[7:0] indicates owner as follow 0-15 = PF0-15,
|
|
* 16 = MFW, 17 = diag over serial
|
|
*/
|
|
#define RESOURCE_OPCODE_BUSY 2
|
|
/* indicate release request was acknowledged */
|
|
#define RESOURCE_OPCODE_RELEASED 3
|
|
/* indicate release request was previously received by other owner */
|
|
#define RESOURCE_OPCODE_RELEASED_PREVIOUS 4
|
|
/* indicate wrong owner during release */
|
|
#define RESOURCE_OPCODE_WRONG_OWNER 5
|
|
#define RESOURCE_OPCODE_UNKNOWN_CMD 255
|
|
|
|
/* dedicate resource 0 for dump */
|
|
#define RESOURCE_DUMP 0
|
|
|
|
#define DRV_MSG_CODE_GET_MBA_VERSION 0x00240000 /* Get MBA version */
|
|
/* Send crash dump commands with param[3:0] - opcode */
|
|
#define DRV_MSG_CODE_MDUMP_CMD 0x00250000
|
|
#define MDUMP_DRV_PARAM_OPCODE_MASK 0x0000000f
|
|
/* acknowledge reception of error indication */
|
|
#define DRV_MSG_CODE_MDUMP_ACK 0x01
|
|
/* set epoc and personality as follow: drv_data[3:0] - epoch,
|
|
* drv_data[7:4] - personality
|
|
*/
|
|
#define DRV_MSG_CODE_MDUMP_SET_VALUES 0x02
|
|
/* trigger crash dump procedure */
|
|
#define DRV_MSG_CODE_MDUMP_TRIGGER 0x03
|
|
/* Request valid logs and config words */
|
|
#define DRV_MSG_CODE_MDUMP_GET_CONFIG 0x04
|
|
/* Set triggers mask. drv_mb_param should indicate (bitwise) which
|
|
* trigger enabled
|
|
*/
|
|
#define DRV_MSG_CODE_MDUMP_SET_ENABLE 0x05
|
|
/* Clear all logs */
|
|
#define DRV_MSG_CODE_MDUMP_CLEAR_LOGS 0x06
|
|
#define DRV_MSG_CODE_MDUMP_GET_RETAIN 0x07 /* Get retained data */
|
|
#define DRV_MSG_CODE_MDUMP_CLR_RETAIN 0x08 /* Clear retain data */
|
|
#define DRV_MSG_CODE_MEM_ECC_EVENTS 0x00260000 /* Param: None */
|
|
/* Param: [0:15] - gpio number */
|
|
#define DRV_MSG_CODE_GPIO_INFO 0x00270000
|
|
/* Value will be placed in union */
|
|
#define DRV_MSG_CODE_EXT_PHY_READ 0x00280000
|
|
/* Value should be placed in union */
|
|
#define DRV_MSG_CODE_EXT_PHY_WRITE 0x00290000
|
|
#define DRV_MB_PARAM_ADDR_OFFSET 0
|
|
#define DRV_MB_PARAM_ADDR_MASK 0x0000FFFF
|
|
#define DRV_MB_PARAM_DEVAD_OFFSET 16
|
|
#define DRV_MB_PARAM_DEVAD_MASK 0x001F0000
|
|
#define DRV_MB_PARAM_PORT_OFFSET 21
|
|
#define DRV_MB_PARAM_PORT_MASK 0x00600000
|
|
#define DRV_MSG_CODE_EXT_PHY_FW_UPGRADE 0x002a0000
|
|
|
|
#define DRV_MSG_CODE_GET_TLV_DONE 0x002f0000 /* Param: None */
|
|
/* Param: Set DRV_MB_PARAM_FEATURE_SUPPORT_* */
|
|
#define DRV_MSG_CODE_FEATURE_SUPPORT 0x00300000
|
|
/* return FW_MB_PARAM_FEATURE_SUPPORT_* */
|
|
#define DRV_MSG_CODE_GET_MFW_FEATURE_SUPPORT 0x00310000
|
|
#define DRV_MSG_CODE_READ_WOL_REG 0X00320000
|
|
#define DRV_MSG_CODE_WRITE_WOL_REG 0X00330000
|
|
#define DRV_MSG_CODE_GET_WOL_BUFFER 0X00340000
|
|
/* Param: [0:23] Attribute key, [24:31] Attribute sub command */
|
|
#define DRV_MSG_CODE_ATTRIBUTE 0x00350000
|
|
|
|
/* Param: Password len. Union: Plain Password */
|
|
#define DRV_MSG_CODE_ENCRYPT_PASSWORD 0x00360000
|
|
|
|
#define DRV_MSG_SEQ_NUMBER_MASK 0x0000ffff
|
|
|
|
u32 drv_mb_param;
|
|
/* UNLOAD_REQ params */
|
|
#define DRV_MB_PARAM_UNLOAD_WOL_UNKNOWN 0x00000000
|
|
#define DRV_MB_PARAM_UNLOAD_WOL_MCP 0x00000001
|
|
#define DRV_MB_PARAM_UNLOAD_WOL_DISABLED 0x00000002
|
|
#define DRV_MB_PARAM_UNLOAD_WOL_ENABLED 0x00000003
|
|
|
|
/* UNLOAD_DONE_params */
|
|
#define DRV_MB_PARAM_UNLOAD_NON_D3_POWER 0x00000001
|
|
|
|
/* INIT_PHY params */
|
|
#define DRV_MB_PARAM_INIT_PHY_FORCE 0x00000001
|
|
#define DRV_MB_PARAM_INIT_PHY_DONT_CARE 0x00000002
|
|
|
|
/* LLDP / DCBX params*/
|
|
/* To be used with SET_LLDP command */
|
|
#define DRV_MB_PARAM_LLDP_SEND_MASK 0x00000001
|
|
#define DRV_MB_PARAM_LLDP_SEND_OFFSET 0
|
|
/* To be used with SET_LLDP and REGISTER_LLDP_TLVS_RX commands */
|
|
#define DRV_MB_PARAM_LLDP_AGENT_MASK 0x00000006
|
|
#define DRV_MB_PARAM_LLDP_AGENT_OFFSET 1
|
|
/* To be used with REGISTER_LLDP_TLVS_RX command */
|
|
#define DRV_MB_PARAM_LLDP_TLV_RX_VALID_MASK 0x00000001
|
|
#define DRV_MB_PARAM_LLDP_TLV_RX_VALID_OFFSET 0
|
|
#define DRV_MB_PARAM_LLDP_TLV_RX_TYPE_MASK 0x000007f0
|
|
#define DRV_MB_PARAM_LLDP_TLV_RX_TYPE_OFFSET 4
|
|
/* To be used with SET_DCBX command */
|
|
#define DRV_MB_PARAM_DCBX_NOTIFY_MASK 0x00000008
|
|
#define DRV_MB_PARAM_DCBX_NOTIFY_OFFSET 3
|
|
|
|
#define DRV_MB_PARAM_NIG_DRAIN_PERIOD_MS_MASK 0x000000FF
|
|
#define DRV_MB_PARAM_NIG_DRAIN_PERIOD_MS_OFFSET 0
|
|
|
|
#define DRV_MB_PARAM_NVM_PUT_FILE_BEGIN_MFW 0x1
|
|
#define DRV_MB_PARAM_NVM_PUT_FILE_BEGIN_IMAGE 0x2
|
|
|
|
#define DRV_MB_PARAM_NVM_OFFSET_OFFSET 0
|
|
#define DRV_MB_PARAM_NVM_OFFSET_MASK 0x00FFFFFF
|
|
#define DRV_MB_PARAM_NVM_LEN_OFFSET 24
|
|
#define DRV_MB_PARAM_NVM_LEN_MASK 0xFF000000
|
|
|
|
#define DRV_MB_PARAM_PHY_ADDR_OFFSET 0
|
|
#define DRV_MB_PARAM_PHY_ADDR_MASK 0x1FF0FFFF
|
|
#define DRV_MB_PARAM_PHY_LANE_OFFSET 16
|
|
#define DRV_MB_PARAM_PHY_LANE_MASK 0x000F0000
|
|
#define DRV_MB_PARAM_PHY_SELECT_PORT_OFFSET 29
|
|
#define DRV_MB_PARAM_PHY_SELECT_PORT_MASK 0x20000000
|
|
#define DRV_MB_PARAM_PHY_PORT_OFFSET 30
|
|
#define DRV_MB_PARAM_PHY_PORT_MASK 0xc0000000
|
|
|
|
#define DRV_MB_PARAM_PHYMOD_LANE_OFFSET 0
|
|
#define DRV_MB_PARAM_PHYMOD_LANE_MASK 0x000000FF
|
|
#define DRV_MB_PARAM_PHYMOD_SIZE_OFFSET 8
|
|
#define DRV_MB_PARAM_PHYMOD_SIZE_MASK 0x000FFF00
|
|
/* configure vf MSIX params BB */
|
|
#define DRV_MB_PARAM_CFG_VF_MSIX_VF_ID_OFFSET 0
|
|
#define DRV_MB_PARAM_CFG_VF_MSIX_VF_ID_MASK 0x000000FF
|
|
#define DRV_MB_PARAM_CFG_VF_MSIX_SB_NUM_OFFSET 8
|
|
#define DRV_MB_PARAM_CFG_VF_MSIX_SB_NUM_MASK 0x0000FF00
|
|
/* configure vf MSIX for PF params AH*/
|
|
#define DRV_MB_PARAM_CFG_PF_VFS_MSIX_SB_NUM_OFFSET 0
|
|
#define DRV_MB_PARAM_CFG_PF_VFS_MSIX_SB_NUM_MASK 0x000000FF
|
|
|
|
/* OneView configuration parametres */
|
|
#define DRV_MB_PARAM_OV_CURR_CFG_OFFSET 0
|
|
#define DRV_MB_PARAM_OV_CURR_CFG_MASK 0x0000000F
|
|
#define DRV_MB_PARAM_OV_CURR_CFG_NONE 0
|
|
#define DRV_MB_PARAM_OV_CURR_CFG_OS 1
|
|
#define DRV_MB_PARAM_OV_CURR_CFG_VENDOR_SPEC 2
|
|
#define DRV_MB_PARAM_OV_CURR_CFG_OTHER 3
|
|
#define DRV_MB_PARAM_OV_CURR_CFG_VC_CLP 4
|
|
#define DRV_MB_PARAM_OV_CURR_CFG_CNU 5
|
|
#define DRV_MB_PARAM_OV_CURR_CFG_DCI 6
|
|
#define DRV_MB_PARAM_OV_CURR_CFG_HII 7
|
|
|
|
#define DRV_MB_PARAM_OV_UPDATE_BOOT_PROG_OFFSET 0
|
|
#define DRV_MB_PARAM_OV_UPDATE_BOOT_PROG_MASK 0x000000FF
|
|
#define DRV_MB_PARAM_OV_UPDATE_BOOT_PROG_NONE (1 << 0)
|
|
#define DRV_MB_PARAM_OV_UPDATE_BOOT_PROG_ISCSI_IP_ACQUIRED (1 << 1)
|
|
#define DRV_MB_PARAM_OV_UPDATE_BOOT_PROG_FCOE_FABRIC_LOGIN_SUCCESS (1 << 1)
|
|
#define DRV_MB_PARAM_OV_UPDATE_BOOT_PROG_TRARGET_FOUND (1 << 2)
|
|
#define DRV_MB_PARAM_OV_UPDATE_BOOT_PROG_ISCSI_CHAP_SUCCESS (1 << 3)
|
|
#define DRV_MB_PARAM_OV_UPDATE_BOOT_PROG_FCOE_LUN_FOUND (1 << 3)
|
|
#define DRV_MB_PARAM_OV_UPDATE_BOOT_PROG_LOGGED_INTO_TGT (1 << 4)
|
|
#define DRV_MB_PARAM_OV_UPDATE_BOOT_PROG_IMG_DOWNLOADED (1 << 5)
|
|
#define DRV_MB_PARAM_OV_UPDATE_BOOT_PROG_OS_HANDOFF (1 << 6)
|
|
#define DRV_MB_PARAM_OV_UPDATE_BOOT_COMPLETED 0
|
|
|
|
#define DRV_MB_PARAM_OV_PCI_BUS_NUM_OFFSET 0
|
|
#define DRV_MB_PARAM_OV_PCI_BUS_NUM_MASK 0x000000FF
|
|
|
|
#define DRV_MB_PARAM_OV_STORM_FW_VER_OFFSET 0
|
|
#define DRV_MB_PARAM_OV_STORM_FW_VER_MASK 0xFFFFFFFF
|
|
#define DRV_MB_PARAM_OV_STORM_FW_VER_MAJOR_MASK 0xFF000000
|
|
#define DRV_MB_PARAM_OV_STORM_FW_VER_MINOR_MASK 0x00FF0000
|
|
#define DRV_MB_PARAM_OV_STORM_FW_VER_BUILD_MASK 0x0000FF00
|
|
#define DRV_MB_PARAM_OV_STORM_FW_VER_DROP_MASK 0x000000FF
|
|
|
|
#define DRV_MSG_CODE_OV_UPDATE_DRIVER_STATE_OFFSET 0
|
|
#define DRV_MSG_CODE_OV_UPDATE_DRIVER_STATE_MASK 0xF
|
|
#define DRV_MSG_CODE_OV_UPDATE_DRIVER_STATE_UNKNOWN 0x1
|
|
/* Not Installed*/
|
|
#define DRV_MSG_CODE_OV_UPDATE_DRIVER_STATE_NOT_LOADED 0x2
|
|
#define DRV_MSG_CODE_OV_UPDATE_DRIVER_STATE_LOADING 0x3
|
|
/* installed but disabled by user/admin/OS */
|
|
#define DRV_MSG_CODE_OV_UPDATE_DRIVER_STATE_DISABLED 0x4
|
|
/* installed and active */
|
|
#define DRV_MSG_CODE_OV_UPDATE_DRIVER_STATE_ACTIVE 0x5
|
|
|
|
#define DRV_MB_PARAM_OV_MTU_SIZE_OFFSET 0
|
|
#define DRV_MB_PARAM_OV_MTU_SIZE_MASK 0xFFFFFFFF
|
|
|
|
#define DRV_MB_PARAM_ESWITCH_MODE_MASK (DRV_MB_PARAM_ESWITCH_MODE_NONE | \
|
|
DRV_MB_PARAM_ESWITCH_MODE_VEB | \
|
|
DRV_MB_PARAM_ESWITCH_MODE_VEPA)
|
|
#define DRV_MB_PARAM_ESWITCH_MODE_NONE 0x0
|
|
#define DRV_MB_PARAM_ESWITCH_MODE_VEB 0x1
|
|
#define DRV_MB_PARAM_ESWITCH_MODE_VEPA 0x2
|
|
|
|
#define DRV_MB_PARAM_DUMMY_OEM_UPDATES_MASK 0x1
|
|
#define DRV_MB_PARAM_DUMMY_OEM_UPDATES_OFFSET 0
|
|
|
|
#define DRV_MB_PARAM_SET_LED_MODE_OPER 0x0
|
|
#define DRV_MB_PARAM_SET_LED_MODE_ON 0x1
|
|
#define DRV_MB_PARAM_SET_LED_MODE_OFF 0x2
|
|
|
|
#define DRV_MB_PARAM_TRANSCEIVER_PORT_OFFSET 0
|
|
#define DRV_MB_PARAM_TRANSCEIVER_PORT_MASK 0x00000003
|
|
#define DRV_MB_PARAM_TRANSCEIVER_SIZE_OFFSET 2
|
|
#define DRV_MB_PARAM_TRANSCEIVER_SIZE_MASK 0x000000FC
|
|
#define DRV_MB_PARAM_TRANSCEIVER_I2C_ADDRESS_OFFSET 8
|
|
#define DRV_MB_PARAM_TRANSCEIVER_I2C_ADDRESS_MASK 0x0000FF00
|
|
#define DRV_MB_PARAM_TRANSCEIVER_OFFSET_OFFSET 16
|
|
#define DRV_MB_PARAM_TRANSCEIVER_OFFSET_MASK 0xFFFF0000
|
|
|
|
#define DRV_MB_PARAM_GPIO_NUMBER_OFFSET 0
|
|
#define DRV_MB_PARAM_GPIO_NUMBER_MASK 0x0000FFFF
|
|
#define DRV_MB_PARAM_GPIO_VALUE_OFFSET 16
|
|
#define DRV_MB_PARAM_GPIO_VALUE_MASK 0xFFFF0000
|
|
#define DRV_MB_PARAM_GPIO_DIRECTION_OFFSET 16
|
|
#define DRV_MB_PARAM_GPIO_DIRECTION_MASK 0x00FF0000
|
|
#define DRV_MB_PARAM_GPIO_CTRL_OFFSET 24
|
|
#define DRV_MB_PARAM_GPIO_CTRL_MASK 0xFF000000
|
|
|
|
/* Resource Allocation params - Driver version support*/
|
|
#define DRV_MB_PARAM_RESOURCE_ALLOC_VERSION_MAJOR_MASK 0xFFFF0000
|
|
#define DRV_MB_PARAM_RESOURCE_ALLOC_VERSION_MAJOR_OFFSET 16
|
|
#define DRV_MB_PARAM_RESOURCE_ALLOC_VERSION_MINOR_MASK 0x0000FFFF
|
|
#define DRV_MB_PARAM_RESOURCE_ALLOC_VERSION_MINOR_OFFSET 0
|
|
|
|
#define DRV_MB_PARAM_BIST_UNKNOWN_TEST 0
|
|
#define DRV_MB_PARAM_BIST_REGISTER_TEST 1
|
|
#define DRV_MB_PARAM_BIST_CLOCK_TEST 2
|
|
#define DRV_MB_PARAM_BIST_NVM_TEST_NUM_IMAGES 3
|
|
#define DRV_MB_PARAM_BIST_NVM_TEST_IMAGE_BY_INDEX 4
|
|
|
|
#define DRV_MB_PARAM_BIST_RC_UNKNOWN 0
|
|
#define DRV_MB_PARAM_BIST_RC_PASSED 1
|
|
#define DRV_MB_PARAM_BIST_RC_FAILED 2
|
|
#define DRV_MB_PARAM_BIST_RC_INVALID_PARAMETER 3
|
|
|
|
#define DRV_MB_PARAM_BIST_TEST_INDEX_OFFSET 0
|
|
#define DRV_MB_PARAM_BIST_TEST_INDEX_MASK 0x000000FF
|
|
#define DRV_MB_PARAM_BIST_TEST_IMAGE_INDEX_OFFSET 8
|
|
#define DRV_MB_PARAM_BIST_TEST_IMAGE_INDEX_MASK 0x0000FF00
|
|
|
|
#define DRV_MB_PARAM_FEATURE_SUPPORT_PORT_MASK 0x0000FFFF
|
|
#define DRV_MB_PARAM_FEATURE_SUPPORT_PORT_OFFSET 0
|
|
/* driver supports SmartLinQ parameter */
|
|
#define DRV_MB_PARAM_FEATURE_SUPPORT_PORT_SMARTLINQ 0x00000001
|
|
/* driver supports EEE parameter */
|
|
#define DRV_MB_PARAM_FEATURE_SUPPORT_PORT_EEE 0x00000002
|
|
#define DRV_MB_PARAM_FEATURE_SUPPORT_FUNC_MASK 0xFFFF0000
|
|
#define DRV_MB_PARAM_FEATURE_SUPPORT_FUNC_OFFSET 16
|
|
/* driver supports virtual link parameter */
|
|
#define DRV_MB_PARAM_FEATURE_SUPPORT_FUNC_VLINK 0x00010000
|
|
/* Driver attributes params */
|
|
#define DRV_MB_PARAM_ATTRIBUTE_KEY_OFFSET 0
|
|
#define DRV_MB_PARAM_ATTRIBUTE_KEY_MASK 0x00FFFFFF
|
|
#define DRV_MB_PARAM_ATTRIBUTE_CMD_OFFSET 24
|
|
#define DRV_MB_PARAM_ATTRIBUTE_CMD_MASK 0xFF000000
|
|
|
|
u32 fw_mb_header;
|
|
#define FW_MSG_CODE_MASK 0xffff0000
|
|
#define FW_MSG_CODE_UNSUPPORTED 0x00000000
|
|
#define FW_MSG_CODE_DRV_LOAD_ENGINE 0x10100000
|
|
#define FW_MSG_CODE_DRV_LOAD_PORT 0x10110000
|
|
#define FW_MSG_CODE_DRV_LOAD_FUNCTION 0x10120000
|
|
#define FW_MSG_CODE_DRV_LOAD_REFUSED_PDA 0x10200000
|
|
#define FW_MSG_CODE_DRV_LOAD_REFUSED_HSI_1 0x10210000
|
|
#define FW_MSG_CODE_DRV_LOAD_REFUSED_DIAG 0x10220000
|
|
#define FW_MSG_CODE_DRV_LOAD_REFUSED_HSI 0x10230000
|
|
#define FW_MSG_CODE_DRV_LOAD_REFUSED_REQUIRES_FORCE 0x10300000
|
|
#define FW_MSG_CODE_DRV_LOAD_REFUSED_REJECT 0x10310000
|
|
#define FW_MSG_CODE_DRV_LOAD_DONE 0x11100000
|
|
#define FW_MSG_CODE_DRV_UNLOAD_ENGINE 0x20110000
|
|
#define FW_MSG_CODE_DRV_UNLOAD_PORT 0x20120000
|
|
#define FW_MSG_CODE_DRV_UNLOAD_FUNCTION 0x20130000
|
|
#define FW_MSG_CODE_DRV_UNLOAD_DONE 0x21100000
|
|
#define FW_MSG_CODE_INIT_PHY_DONE 0x21200000
|
|
#define FW_MSG_CODE_INIT_PHY_ERR_INVALID_ARGS 0x21300000
|
|
#define FW_MSG_CODE_LINK_RESET_DONE 0x23000000
|
|
#define FW_MSG_CODE_SET_LLDP_DONE 0x24000000
|
|
#define FW_MSG_CODE_SET_LLDP_UNSUPPORTED_AGENT 0x24010000
|
|
#define FW_MSG_CODE_REGISTER_LLDP_TLVS_RX_DONE 0x24100000
|
|
#define FW_MSG_CODE_SET_DCBX_DONE 0x25000000
|
|
#define FW_MSG_CODE_UPDATE_CURR_CFG_DONE 0x26000000
|
|
#define FW_MSG_CODE_UPDATE_BUS_NUM_DONE 0x27000000
|
|
#define FW_MSG_CODE_UPDATE_BOOT_PROGRESS_DONE 0x28000000
|
|
#define FW_MSG_CODE_UPDATE_STORM_FW_VER_DONE 0x29000000
|
|
#define FW_MSG_CODE_UPDATE_DRIVER_STATE_DONE 0x31000000
|
|
#define FW_MSG_CODE_DRV_MSG_CODE_BW_UPDATE_DONE 0x32000000
|
|
#define FW_MSG_CODE_DRV_MSG_CODE_MTU_SIZE_DONE 0x33000000
|
|
#define FW_MSG_CODE_RESOURCE_ALLOC_OK 0x34000000
|
|
#define FW_MSG_CODE_RESOURCE_ALLOC_UNKNOWN 0x35000000
|
|
#define FW_MSG_CODE_RESOURCE_ALLOC_DEPRECATED 0x36000000
|
|
#define FW_MSG_CODE_RESOURCE_ALLOC_GEN_ERR 0x37000000
|
|
#define FW_MSG_CODE_NIG_DRAIN_DONE 0x30000000
|
|
#define FW_MSG_CODE_VF_DISABLED_DONE 0xb0000000
|
|
#define FW_MSG_CODE_DRV_CFG_VF_MSIX_DONE 0xb0010000
|
|
#define FW_MSG_CODE_FLR_ACK 0x02000000
|
|
#define FW_MSG_CODE_FLR_NACK 0x02100000
|
|
#define FW_MSG_CODE_SET_DRIVER_DONE 0x02200000
|
|
#define FW_MSG_CODE_SET_VMAC_SUCCESS 0x02300000
|
|
#define FW_MSG_CODE_SET_VMAC_FAIL 0x02400000
|
|
|
|
#define FW_MSG_CODE_NVM_OK 0x00010000
|
|
#define FW_MSG_CODE_NVM_INVALID_MODE 0x00020000
|
|
#define FW_MSG_CODE_NVM_PREV_CMD_WAS_NOT_FINISHED 0x00030000
|
|
#define FW_MSG_CODE_NVM_FAILED_TO_ALLOCATE_PAGE 0x00040000
|
|
#define FW_MSG_CODE_NVM_INVALID_DIR_FOUND 0x00050000
|
|
#define FW_MSG_CODE_NVM_PAGE_NOT_FOUND 0x00060000
|
|
#define FW_MSG_CODE_NVM_FAILED_PARSING_BNDLE_HEADER 0x00070000
|
|
#define FW_MSG_CODE_NVM_FAILED_PARSING_IMAGE_HEADER 0x00080000
|
|
#define FW_MSG_CODE_NVM_PARSING_OUT_OF_SYNC 0x00090000
|
|
#define FW_MSG_CODE_NVM_FAILED_UPDATING_DIR 0x000a0000
|
|
#define FW_MSG_CODE_NVM_FAILED_TO_FREE_PAGE 0x000b0000
|
|
#define FW_MSG_CODE_NVM_FILE_NOT_FOUND 0x000c0000
|
|
#define FW_MSG_CODE_NVM_OPERATION_FAILED 0x000d0000
|
|
#define FW_MSG_CODE_NVM_FAILED_UNALIGNED 0x000e0000
|
|
#define FW_MSG_CODE_NVM_BAD_OFFSET 0x000f0000
|
|
#define FW_MSG_CODE_NVM_BAD_SIGNATURE 0x00100000
|
|
#define FW_MSG_CODE_NVM_FILE_READ_ONLY 0x00200000
|
|
#define FW_MSG_CODE_NVM_UNKNOWN_FILE 0x00300000
|
|
#define FW_MSG_CODE_NVM_PUT_FILE_FINISH_OK 0x00400000
|
|
/* MFW reject "mcp reset" command if one of the drivers is up */
|
|
#define FW_MSG_CODE_MCP_RESET_REJECT 0x00600000
|
|
#define FW_MSG_CODE_NVM_FAILED_CALC_HASH 0x00310000
|
|
#define FW_MSG_CODE_NVM_PUBLIC_KEY_MISSING 0x00320000
|
|
#define FW_MSG_CODE_NVM_INVALID_PUBLIC_KEY 0x00330000
|
|
|
|
#define FW_MSG_CODE_PHY_OK 0x00110000
|
|
#define FW_MSG_CODE_PHY_ERROR 0x00120000
|
|
#define FW_MSG_CODE_SET_SECURE_MODE_ERROR 0x00130000
|
|
#define FW_MSG_CODE_SET_SECURE_MODE_OK 0x00140000
|
|
#define FW_MSG_MODE_PHY_PRIVILEGE_ERROR 0x00150000
|
|
#define FW_MSG_CODE_OK 0x00160000
|
|
#define FW_MSG_CODE_ERROR 0x00170000
|
|
#define FW_MSG_CODE_LED_MODE_INVALID 0x00170000
|
|
#define FW_MSG_CODE_PHY_DIAG_OK 0x00160000
|
|
#define FW_MSG_CODE_PHY_DIAG_ERROR 0x00170000
|
|
#define FW_MSG_CODE_INIT_HW_FAILED_TO_ALLOCATE_PAGE 0x00040000
|
|
#define FW_MSG_CODE_INIT_HW_FAILED_BAD_STATE 0x00170000
|
|
#define FW_MSG_CODE_INIT_HW_FAILED_TO_SET_WINDOW 0x000d0000
|
|
#define FW_MSG_CODE_INIT_HW_FAILED_NO_IMAGE 0x000c0000
|
|
#define FW_MSG_CODE_INIT_HW_FAILED_VERSION_MISMATCH 0x00100000
|
|
#define FW_MSG_CODE_TRANSCEIVER_DIAG_OK 0x00160000
|
|
#define FW_MSG_CODE_TRANSCEIVER_DIAG_ERROR 0x00170000
|
|
#define FW_MSG_CODE_TRANSCEIVER_NOT_PRESENT 0x00020000
|
|
#define FW_MSG_CODE_TRANSCEIVER_BAD_BUFFER_SIZE 0x000f0000
|
|
#define FW_MSG_CODE_GPIO_OK 0x00160000
|
|
#define FW_MSG_CODE_GPIO_DIRECTION_ERR 0x00170000
|
|
#define FW_MSG_CODE_GPIO_CTRL_ERR 0x00020000
|
|
#define FW_MSG_CODE_GPIO_INVALID 0x000f0000
|
|
#define FW_MSG_CODE_GPIO_INVALID_VALUE 0x00050000
|
|
#define FW_MSG_CODE_BIST_TEST_INVALID 0x000f0000
|
|
#define FW_MSG_CODE_EXTPHY_INVALID_IMAGE_HEADER 0x00700000
|
|
#define FW_MSG_CODE_EXTPHY_INVALID_PHY_TYPE 0x00710000
|
|
#define FW_MSG_CODE_EXTPHY_OPERATION_FAILED 0x00720000
|
|
#define FW_MSG_CODE_EXTPHY_NO_PHY_DETECTED 0x00730000
|
|
#define FW_MSG_CODE_RECOVERY_MODE 0x00740000
|
|
|
|
/* mdump related response codes */
|
|
#define FW_MSG_CODE_MDUMP_NO_IMAGE_FOUND 0x00010000
|
|
#define FW_MSG_CODE_MDUMP_ALLOC_FAILED 0x00020000
|
|
#define FW_MSG_CODE_MDUMP_INVALID_CMD 0x00030000
|
|
#define FW_MSG_CODE_MDUMP_IN_PROGRESS 0x00040000
|
|
#define FW_MSG_CODE_MDUMP_WRITE_FAILED 0x00050000
|
|
|
|
|
|
#define FW_MSG_CODE_DRV_CFG_PF_VFS_MSIX_DONE 0x00870000
|
|
#define FW_MSG_CODE_DRV_CFG_PF_VFS_MSIX_BAD_ASIC 0x00880000
|
|
|
|
#define FW_MSG_CODE_WOL_READ_WRITE_OK 0x00820000
|
|
#define FW_MSG_CODE_WOL_READ_WRITE_INVALID_VAL 0x00830000
|
|
#define FW_MSG_CODE_WOL_READ_WRITE_INVALID_ADDR 0x00840000
|
|
#define FW_MSG_CODE_WOL_READ_BUFFER_OK 0x00850000
|
|
#define FW_MSG_CODE_WOL_READ_BUFFER_INVALID_VAL 0x00860000
|
|
|
|
#define FW_MSG_SEQ_NUMBER_MASK 0x0000ffff
|
|
|
|
#define FW_MSG_CODE_ATTRIBUTE_INVALID_KEY 0x00020000
|
|
#define FW_MSG_CODE_ATTRIBUTE_INVALID_CMD 0x00030000
|
|
|
|
u32 fw_mb_param;
|
|
/* Resource Allocation params - MFW version support */
|
|
#define FW_MB_PARAM_RESOURCE_ALLOC_VERSION_MAJOR_MASK 0xFFFF0000
|
|
#define FW_MB_PARAM_RESOURCE_ALLOC_VERSION_MAJOR_OFFSET 16
|
|
#define FW_MB_PARAM_RESOURCE_ALLOC_VERSION_MINOR_MASK 0x0000FFFF
|
|
#define FW_MB_PARAM_RESOURCE_ALLOC_VERSION_MINOR_OFFSET 0
|
|
|
|
/* get MFW feature support response */
|
|
/* MFW supports SmartLinQ */
|
|
#define FW_MB_PARAM_FEATURE_SUPPORT_SMARTLINQ 0x00000001
|
|
/* MFW supports EEE */
|
|
#define FW_MB_PARAM_FEATURE_SUPPORT_EEE 0x00000002
|
|
/* MFW supports DRV_LOAD Timeout */
|
|
#define FW_MB_PARAM_FEATURE_SUPPORT_DRV_LOAD_TO 0x00000004
|
|
/* MFW support complete IGU cleanup upon FLR */
|
|
#define FW_MB_PARAM_FEATURE_SUPPORT_IGU_CLEANUP 0x00000080
|
|
/* MFW supports virtual link */
|
|
#define FW_MB_PARAM_FEATURE_SUPPORT_VLINK 0x00010000
|
|
|
|
#define FW_MB_PARAM_LOAD_DONE_DID_EFUSE_ERROR (1 << 0)
|
|
|
|
u32 drv_pulse_mb;
|
|
#define DRV_PULSE_SEQ_MASK 0x00007fff
|
|
#define DRV_PULSE_SYSTEM_TIME_MASK 0xffff0000
|
|
/*
|
|
* The system time is in the format of
|
|
* (year-2001)*12*32 + month*32 + day.
|
|
*/
|
|
#define DRV_PULSE_ALWAYS_ALIVE 0x00008000
|
|
/*
|
|
* Indicate to the firmware not to go into the
|
|
* OS-absent when it is not getting driver pulse.
|
|
* This is used for debugging as well for PXE(MBA).
|
|
*/
|
|
|
|
u32 mcp_pulse_mb;
|
|
#define MCP_PULSE_SEQ_MASK 0x00007fff
|
|
#define MCP_PULSE_ALWAYS_ALIVE 0x00008000
|
|
/* Indicates to the driver not to assert due to lack
|
|
* of MCP response
|
|
*/
|
|
#define MCP_EVENT_MASK 0xffff0000
|
|
#define MCP_EVENT_OTHER_DRIVER_RESET_REQ 0x00010000
|
|
|
|
/* The union data is used by the driver to pass parameters to the scratchpad. */
|
|
|
|
union drv_union_data union_data;
|
|
|
|
};
|
|
|
|
/* MFW - DRV MB */
|
|
/**********************************************************************
|
|
* Description
|
|
* Incremental Aggregative
|
|
* 8-bit MFW counter per message
|
|
* 8-bit ack-counter per message
|
|
* Capabilities
|
|
* Provides up to 256 aggregative message per type
|
|
* Provides 4 message types in dword
|
|
* Message type pointers to byte offset
|
|
* Backward Compatibility by using sizeof for the counters.
|
|
* No lock requires for 32bit messages
|
|
* Limitations:
|
|
* In case of messages greater than 32bit, a dedicated mechanism(e.g lock)
|
|
* is required to prevent data corruption.
|
|
**********************************************************************/
|
|
enum MFW_DRV_MSG_TYPE {
|
|
MFW_DRV_MSG_LINK_CHANGE,
|
|
MFW_DRV_MSG_FLR_FW_ACK_FAILED,
|
|
MFW_DRV_MSG_VF_DISABLED,
|
|
MFW_DRV_MSG_LLDP_DATA_UPDATED,
|
|
MFW_DRV_MSG_DCBX_REMOTE_MIB_UPDATED,
|
|
MFW_DRV_MSG_DCBX_OPERATIONAL_MIB_UPDATED,
|
|
MFW_DRV_MSG_ERROR_RECOVERY,
|
|
MFW_DRV_MSG_BW_UPDATE,
|
|
MFW_DRV_MSG_S_TAG_UPDATE,
|
|
MFW_DRV_MSG_GET_LAN_STATS,
|
|
MFW_DRV_MSG_GET_FCOE_STATS,
|
|
MFW_DRV_MSG_GET_ISCSI_STATS,
|
|
MFW_DRV_MSG_GET_RDMA_STATS,
|
|
MFW_DRV_MSG_FAILURE_DETECTED,
|
|
MFW_DRV_MSG_TRANSCEIVER_STATE_CHANGE,
|
|
MFW_DRV_MSG_CRITICAL_ERROR_OCCURRED,
|
|
MFW_DRV_MSG_EEE_NEGOTIATION_COMPLETE,
|
|
MFW_DRV_MSG_GET_TLV_REQ,
|
|
MFW_DRV_MSG_OEM_CFG_UPDATE,
|
|
MFW_DRV_MSG_LLDP_RECEIVED_TLVS_UPDATED,
|
|
MFW_DRV_MSG_MAX
|
|
};
|
|
|
|
#define MFW_DRV_MSG_MAX_DWORDS(msgs) (((msgs - 1) >> 2) + 1)
|
|
#define MFW_DRV_MSG_DWORD(msg_id) (msg_id >> 2)
|
|
#define MFW_DRV_MSG_OFFSET(msg_id) ((msg_id & 0x3) << 3)
|
|
#define MFW_DRV_MSG_MASK(msg_id) (0xff << MFW_DRV_MSG_OFFSET(msg_id))
|
|
|
|
#ifdef BIG_ENDIAN /* Like MFW */
|
|
#define DRV_ACK_MSG(msg_p, msg_id) \
|
|
((u8)((u8 *)msg_p)[msg_id]++;)
|
|
#else
|
|
#define DRV_ACK_MSG(msg_p, msg_id) \
|
|
((u8)((u8 *)msg_p)[((msg_id & ~3) | ((~msg_id) & 3))]++;)
|
|
#endif
|
|
|
|
#define MFW_DRV_UPDATE(shmem_func, msg_id) \
|
|
((u8)((u8 *)(MFW_MB_P(shmem_func)->msg))[msg_id]++;)
|
|
|
|
struct public_mfw_mb {
|
|
u32 sup_msgs; /* Assigend with MFW_DRV_MSG_MAX */
|
|
/* Incremented by the MFW */
|
|
u32 msg[MFW_DRV_MSG_MAX_DWORDS(MFW_DRV_MSG_MAX)];
|
|
/* Incremented by the driver */
|
|
u32 ack[MFW_DRV_MSG_MAX_DWORDS(MFW_DRV_MSG_MAX)];
|
|
};
|
|
|
|
/**************************************/
|
|
/* */
|
|
/* P U B L I C D A T A */
|
|
/* */
|
|
/**************************************/
|
|
enum public_sections {
|
|
PUBLIC_DRV_MB, /* Points to the first drv_mb of path0 */
|
|
PUBLIC_MFW_MB, /* Points to the first mfw_mb of path0 */
|
|
PUBLIC_GLOBAL,
|
|
PUBLIC_PATH,
|
|
PUBLIC_PORT,
|
|
PUBLIC_FUNC,
|
|
PUBLIC_MAX_SECTIONS
|
|
};
|
|
|
|
struct drv_ver_info_stc {
|
|
u32 ver;
|
|
u8 name[32];
|
|
};
|
|
|
|
/* Runtime data needs about 1/2K. We use 2K to be on the safe side.
|
|
* Please make sure data does not exceed this size.
|
|
*/
|
|
#define NUM_RUNTIME_DWORDS 16
|
|
struct drv_init_hw_stc {
|
|
u32 init_hw_bitmask[NUM_RUNTIME_DWORDS];
|
|
u32 init_hw_data[NUM_RUNTIME_DWORDS * 32];
|
|
};
|
|
|
|
struct mcp_public_data {
|
|
/* The sections fields is an array */
|
|
u32 num_sections;
|
|
offsize_t sections[PUBLIC_MAX_SECTIONS];
|
|
struct public_drv_mb drv_mb[MCP_GLOB_FUNC_MAX];
|
|
struct public_mfw_mb mfw_mb[MCP_GLOB_FUNC_MAX];
|
|
struct public_global global;
|
|
struct public_path path[MCP_GLOB_PATH_MAX];
|
|
struct public_port port[MCP_GLOB_PORT_MAX];
|
|
struct public_func func[MCP_GLOB_FUNC_MAX];
|
|
};
|
|
|
|
#define I2C_TRANSCEIVER_ADDR 0xa0
|
|
#define MAX_I2C_TRANSACTION_SIZE 16
|
|
#define MAX_I2C_TRANSCEIVER_PAGE_SIZE 256
|
|
|
|
#endif /* MCP_PUBLIC_H */
|