17ed314c6c
Enabling LRO offload per queue makes sense because the user will probably want to allocate different mempool for LRO queues - the LRO mempool mbuf size may be bigger than non LRO mempool. Change the LRO offload to be per queue instead of per port. If one of the queues is with LRO enabled, all the queues will be configured via DevX. If RSS flows direct TCP packets to queues with different LRO enabling, these flows will not be offloaded with LRO. Signed-off-by: Matan Azrad <matan@mellanox.com> Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
415 lines
9.7 KiB
C
415 lines
9.7 KiB
C
/* SPDX-License-Identifier: BSD-3-Clause
|
|
* Copyright 2015 6WIND S.A.
|
|
* Copyright 2015 Mellanox Technologies, Ltd
|
|
*/
|
|
|
|
#include <unistd.h>
|
|
|
|
#include <rte_ether.h>
|
|
#include <rte_ethdev_driver.h>
|
|
#include <rte_interrupts.h>
|
|
#include <rte_alarm.h>
|
|
|
|
#include "mlx5.h"
|
|
#include "mlx5_rxtx.h"
|
|
#include "mlx5_utils.h"
|
|
|
|
/**
|
|
* Stop traffic on Tx queues.
|
|
*
|
|
* @param dev
|
|
* Pointer to Ethernet device structure.
|
|
*/
|
|
static void
|
|
mlx5_txq_stop(struct rte_eth_dev *dev)
|
|
{
|
|
struct mlx5_priv *priv = dev->data->dev_private;
|
|
unsigned int i;
|
|
|
|
for (i = 0; i != priv->txqs_n; ++i)
|
|
mlx5_txq_release(dev, i);
|
|
}
|
|
|
|
/**
|
|
* Start traffic on Tx queues.
|
|
*
|
|
* @param dev
|
|
* Pointer to Ethernet device structure.
|
|
*
|
|
* @return
|
|
* 0 on success, a negative errno value otherwise and rte_errno is set.
|
|
*/
|
|
static int
|
|
mlx5_txq_start(struct rte_eth_dev *dev)
|
|
{
|
|
struct mlx5_priv *priv = dev->data->dev_private;
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
for (i = 0; i != priv->txqs_n; ++i) {
|
|
struct mlx5_txq_ctrl *txq_ctrl = mlx5_txq_get(dev, i);
|
|
|
|
if (!txq_ctrl)
|
|
continue;
|
|
txq_alloc_elts(txq_ctrl);
|
|
txq_ctrl->ibv = mlx5_txq_ibv_new(dev, i);
|
|
if (!txq_ctrl->ibv) {
|
|
rte_errno = ENOMEM;
|
|
goto error;
|
|
}
|
|
}
|
|
return 0;
|
|
error:
|
|
ret = rte_errno; /* Save rte_errno before cleanup. */
|
|
do {
|
|
mlx5_txq_release(dev, i);
|
|
} while (i-- != 0);
|
|
rte_errno = ret; /* Restore rte_errno. */
|
|
return -rte_errno;
|
|
}
|
|
|
|
/**
|
|
* Stop traffic on Rx queues.
|
|
*
|
|
* @param dev
|
|
* Pointer to Ethernet device structure.
|
|
*/
|
|
static void
|
|
mlx5_rxq_stop(struct rte_eth_dev *dev)
|
|
{
|
|
struct mlx5_priv *priv = dev->data->dev_private;
|
|
unsigned int i;
|
|
|
|
for (i = 0; i != priv->rxqs_n; ++i)
|
|
mlx5_rxq_release(dev, i);
|
|
}
|
|
|
|
/**
|
|
* Start traffic on Rx queues.
|
|
*
|
|
* @param dev
|
|
* Pointer to Ethernet device structure.
|
|
*
|
|
* @return
|
|
* 0 on success, a negative errno value otherwise and rte_errno is set.
|
|
*/
|
|
static int
|
|
mlx5_rxq_start(struct rte_eth_dev *dev)
|
|
{
|
|
struct mlx5_priv *priv = dev->data->dev_private;
|
|
unsigned int i;
|
|
int ret = 0;
|
|
enum mlx5_rxq_obj_type obj_type = MLX5_RXQ_OBJ_TYPE_IBV;
|
|
|
|
for (i = 0; i < priv->rxqs_n; ++i) {
|
|
if ((*priv->rxqs)[i]->lro) {
|
|
obj_type = MLX5_RXQ_OBJ_TYPE_DEVX_RQ;
|
|
break;
|
|
}
|
|
}
|
|
/* Allocate/reuse/resize mempool for Multi-Packet RQ. */
|
|
if (mlx5_mprq_alloc_mp(dev)) {
|
|
/* Should not release Rx queues but return immediately. */
|
|
return -rte_errno;
|
|
}
|
|
for (i = 0; i != priv->rxqs_n; ++i) {
|
|
struct mlx5_rxq_ctrl *rxq_ctrl = mlx5_rxq_get(dev, i);
|
|
struct rte_mempool *mp;
|
|
|
|
if (!rxq_ctrl)
|
|
continue;
|
|
/* Pre-register Rx mempool. */
|
|
mp = mlx5_rxq_mprq_enabled(&rxq_ctrl->rxq) ?
|
|
rxq_ctrl->rxq.mprq_mp : rxq_ctrl->rxq.mp;
|
|
DRV_LOG(DEBUG,
|
|
"port %u Rx queue %u registering"
|
|
" mp %s having %u chunks",
|
|
dev->data->port_id, rxq_ctrl->rxq.idx,
|
|
mp->name, mp->nb_mem_chunks);
|
|
mlx5_mr_update_mp(dev, &rxq_ctrl->rxq.mr_ctrl, mp);
|
|
ret = rxq_alloc_elts(rxq_ctrl);
|
|
if (ret)
|
|
goto error;
|
|
rxq_ctrl->obj = mlx5_rxq_obj_new(dev, i, obj_type);
|
|
if (!rxq_ctrl->obj)
|
|
goto error;
|
|
if (obj_type == MLX5_RXQ_OBJ_TYPE_IBV)
|
|
rxq_ctrl->wqn = rxq_ctrl->obj->wq->wq_num;
|
|
else if (obj_type == MLX5_RXQ_OBJ_TYPE_DEVX_RQ)
|
|
rxq_ctrl->wqn = rxq_ctrl->obj->rq->id;
|
|
}
|
|
return 0;
|
|
error:
|
|
ret = rte_errno; /* Save rte_errno before cleanup. */
|
|
do {
|
|
mlx5_rxq_release(dev, i);
|
|
} while (i-- != 0);
|
|
rte_errno = ret; /* Restore rte_errno. */
|
|
return -rte_errno;
|
|
}
|
|
|
|
/**
|
|
* DPDK callback to start the device.
|
|
*
|
|
* Simulate device start by attaching all configured flows.
|
|
*
|
|
* @param dev
|
|
* Pointer to Ethernet device structure.
|
|
*
|
|
* @return
|
|
* 0 on success, a negative errno value otherwise and rte_errno is set.
|
|
*/
|
|
int
|
|
mlx5_dev_start(struct rte_eth_dev *dev)
|
|
{
|
|
struct mlx5_priv *priv = dev->data->dev_private;
|
|
int ret;
|
|
|
|
DRV_LOG(DEBUG, "port %u starting device", dev->data->port_id);
|
|
ret = mlx5_txq_start(dev);
|
|
if (ret) {
|
|
DRV_LOG(ERR, "port %u Tx queue allocation failed: %s",
|
|
dev->data->port_id, strerror(rte_errno));
|
|
return -rte_errno;
|
|
}
|
|
ret = mlx5_rxq_start(dev);
|
|
if (ret) {
|
|
DRV_LOG(ERR, "port %u Rx queue allocation failed: %s",
|
|
dev->data->port_id, strerror(rte_errno));
|
|
mlx5_txq_stop(dev);
|
|
return -rte_errno;
|
|
}
|
|
dev->data->dev_started = 1;
|
|
ret = mlx5_rx_intr_vec_enable(dev);
|
|
if (ret) {
|
|
DRV_LOG(ERR, "port %u Rx interrupt vector creation failed",
|
|
dev->data->port_id);
|
|
goto error;
|
|
}
|
|
mlx5_stats_init(dev);
|
|
ret = mlx5_traffic_enable(dev);
|
|
if (ret) {
|
|
DRV_LOG(DEBUG, "port %u failed to set defaults flows",
|
|
dev->data->port_id);
|
|
goto error;
|
|
}
|
|
ret = mlx5_flow_start(dev, &priv->flows);
|
|
if (ret) {
|
|
DRV_LOG(DEBUG, "port %u failed to set flows",
|
|
dev->data->port_id);
|
|
goto error;
|
|
}
|
|
rte_wmb();
|
|
dev->tx_pkt_burst = mlx5_select_tx_function(dev);
|
|
dev->rx_pkt_burst = mlx5_select_rx_function(dev);
|
|
/* Enable datapath on secondary process. */
|
|
mlx5_mp_req_start_rxtx(dev);
|
|
mlx5_dev_interrupt_handler_install(dev);
|
|
return 0;
|
|
error:
|
|
ret = rte_errno; /* Save rte_errno before cleanup. */
|
|
/* Rollback. */
|
|
dev->data->dev_started = 0;
|
|
mlx5_flow_stop(dev, &priv->flows);
|
|
mlx5_traffic_disable(dev);
|
|
mlx5_txq_stop(dev);
|
|
mlx5_rxq_stop(dev);
|
|
rte_errno = ret; /* Restore rte_errno. */
|
|
return -rte_errno;
|
|
}
|
|
|
|
/**
|
|
* DPDK callback to stop the device.
|
|
*
|
|
* Simulate device stop by detaching all configured flows.
|
|
*
|
|
* @param dev
|
|
* Pointer to Ethernet device structure.
|
|
*/
|
|
void
|
|
mlx5_dev_stop(struct rte_eth_dev *dev)
|
|
{
|
|
struct mlx5_priv *priv = dev->data->dev_private;
|
|
|
|
dev->data->dev_started = 0;
|
|
/* Prevent crashes when queues are still in use. */
|
|
dev->rx_pkt_burst = removed_rx_burst;
|
|
dev->tx_pkt_burst = removed_tx_burst;
|
|
rte_wmb();
|
|
/* Disable datapath on secondary process. */
|
|
mlx5_mp_req_stop_rxtx(dev);
|
|
usleep(1000 * priv->rxqs_n);
|
|
DRV_LOG(DEBUG, "port %u stopping device", dev->data->port_id);
|
|
mlx5_flow_stop(dev, &priv->flows);
|
|
mlx5_traffic_disable(dev);
|
|
mlx5_rx_intr_vec_disable(dev);
|
|
mlx5_dev_interrupt_handler_uninstall(dev);
|
|
mlx5_txq_stop(dev);
|
|
mlx5_rxq_stop(dev);
|
|
}
|
|
|
|
/**
|
|
* Enable traffic flows configured by control plane
|
|
*
|
|
* @param dev
|
|
* Pointer to Ethernet device private data.
|
|
* @param dev
|
|
* Pointer to Ethernet device structure.
|
|
*
|
|
* @return
|
|
* 0 on success, a negative errno value otherwise and rte_errno is set.
|
|
*/
|
|
int
|
|
mlx5_traffic_enable(struct rte_eth_dev *dev)
|
|
{
|
|
struct mlx5_priv *priv = dev->data->dev_private;
|
|
struct rte_flow_item_eth bcast = {
|
|
.dst.addr_bytes = "\xff\xff\xff\xff\xff\xff",
|
|
};
|
|
struct rte_flow_item_eth ipv6_multi_spec = {
|
|
.dst.addr_bytes = "\x33\x33\x00\x00\x00\x00",
|
|
};
|
|
struct rte_flow_item_eth ipv6_multi_mask = {
|
|
.dst.addr_bytes = "\xff\xff\x00\x00\x00\x00",
|
|
};
|
|
struct rte_flow_item_eth unicast = {
|
|
.src.addr_bytes = "\x00\x00\x00\x00\x00\x00",
|
|
};
|
|
struct rte_flow_item_eth unicast_mask = {
|
|
.dst.addr_bytes = "\xff\xff\xff\xff\xff\xff",
|
|
};
|
|
const unsigned int vlan_filter_n = priv->vlan_filter_n;
|
|
const struct rte_ether_addr cmp = {
|
|
.addr_bytes = "\x00\x00\x00\x00\x00\x00",
|
|
};
|
|
unsigned int i;
|
|
unsigned int j;
|
|
int ret;
|
|
|
|
if (priv->isolated)
|
|
return 0;
|
|
if (dev->data->promiscuous) {
|
|
struct rte_flow_item_eth promisc = {
|
|
.dst.addr_bytes = "\x00\x00\x00\x00\x00\x00",
|
|
.src.addr_bytes = "\x00\x00\x00\x00\x00\x00",
|
|
.type = 0,
|
|
};
|
|
|
|
ret = mlx5_ctrl_flow(dev, &promisc, &promisc);
|
|
if (ret)
|
|
goto error;
|
|
}
|
|
if (dev->data->all_multicast) {
|
|
struct rte_flow_item_eth multicast = {
|
|
.dst.addr_bytes = "\x01\x00\x00\x00\x00\x00",
|
|
.src.addr_bytes = "\x00\x00\x00\x00\x00\x00",
|
|
.type = 0,
|
|
};
|
|
|
|
ret = mlx5_ctrl_flow(dev, &multicast, &multicast);
|
|
if (ret)
|
|
goto error;
|
|
} else {
|
|
/* Add broadcast/multicast flows. */
|
|
for (i = 0; i != vlan_filter_n; ++i) {
|
|
uint16_t vlan = priv->vlan_filter[i];
|
|
|
|
struct rte_flow_item_vlan vlan_spec = {
|
|
.tci = rte_cpu_to_be_16(vlan),
|
|
};
|
|
struct rte_flow_item_vlan vlan_mask =
|
|
rte_flow_item_vlan_mask;
|
|
|
|
ret = mlx5_ctrl_flow_vlan(dev, &bcast, &bcast,
|
|
&vlan_spec, &vlan_mask);
|
|
if (ret)
|
|
goto error;
|
|
ret = mlx5_ctrl_flow_vlan(dev, &ipv6_multi_spec,
|
|
&ipv6_multi_mask,
|
|
&vlan_spec, &vlan_mask);
|
|
if (ret)
|
|
goto error;
|
|
}
|
|
if (!vlan_filter_n) {
|
|
ret = mlx5_ctrl_flow(dev, &bcast, &bcast);
|
|
if (ret)
|
|
goto error;
|
|
ret = mlx5_ctrl_flow(dev, &ipv6_multi_spec,
|
|
&ipv6_multi_mask);
|
|
if (ret)
|
|
goto error;
|
|
}
|
|
}
|
|
/* Add MAC address flows. */
|
|
for (i = 0; i != MLX5_MAX_MAC_ADDRESSES; ++i) {
|
|
struct rte_ether_addr *mac = &dev->data->mac_addrs[i];
|
|
|
|
if (!memcmp(mac, &cmp, sizeof(*mac)))
|
|
continue;
|
|
memcpy(&unicast.dst.addr_bytes,
|
|
mac->addr_bytes,
|
|
RTE_ETHER_ADDR_LEN);
|
|
for (j = 0; j != vlan_filter_n; ++j) {
|
|
uint16_t vlan = priv->vlan_filter[j];
|
|
|
|
struct rte_flow_item_vlan vlan_spec = {
|
|
.tci = rte_cpu_to_be_16(vlan),
|
|
};
|
|
struct rte_flow_item_vlan vlan_mask =
|
|
rte_flow_item_vlan_mask;
|
|
|
|
ret = mlx5_ctrl_flow_vlan(dev, &unicast,
|
|
&unicast_mask,
|
|
&vlan_spec,
|
|
&vlan_mask);
|
|
if (ret)
|
|
goto error;
|
|
}
|
|
if (!vlan_filter_n) {
|
|
ret = mlx5_ctrl_flow(dev, &unicast, &unicast_mask);
|
|
if (ret)
|
|
goto error;
|
|
}
|
|
}
|
|
return 0;
|
|
error:
|
|
ret = rte_errno; /* Save rte_errno before cleanup. */
|
|
mlx5_flow_list_flush(dev, &priv->ctrl_flows);
|
|
rte_errno = ret; /* Restore rte_errno. */
|
|
return -rte_errno;
|
|
}
|
|
|
|
|
|
/**
|
|
* Disable traffic flows configured by control plane
|
|
*
|
|
* @param dev
|
|
* Pointer to Ethernet device private data.
|
|
*/
|
|
void
|
|
mlx5_traffic_disable(struct rte_eth_dev *dev)
|
|
{
|
|
struct mlx5_priv *priv = dev->data->dev_private;
|
|
|
|
mlx5_flow_list_flush(dev, &priv->ctrl_flows);
|
|
}
|
|
|
|
/**
|
|
* Restart traffic flows configured by control plane
|
|
*
|
|
* @param dev
|
|
* Pointer to Ethernet device private data.
|
|
*
|
|
* @return
|
|
* 0 on success, a negative errno value otherwise and rte_errno is set.
|
|
*/
|
|
int
|
|
mlx5_traffic_restart(struct rte_eth_dev *dev)
|
|
{
|
|
if (dev->data->dev_started) {
|
|
mlx5_traffic_disable(dev);
|
|
return mlx5_traffic_enable(dev);
|
|
}
|
|
return 0;
|
|
}
|