numam-dpdk/lib/librte_cryptodev/rte_cryptodev.h
Damian Nowak 90197eb094 cryptodev: add digest encrypted feature flag
Some PMDs can only support digest being
encrypted separately in auth-cipher operations.
Thus it is required to add feature flag in PMD
to reflect if it does support digest-appended
both: digest generation with encryption and
decryption with digest verification.
This patch also adds information about new
feature flag to the release notes.

Signed-off-by: Damian Nowak <damianx.nowak@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
2019-07-05 15:28:14 +02:00

1280 lines
37 KiB
C

/* SPDX-License-Identifier: BSD-3-Clause
* Copyright(c) 2015-2017 Intel Corporation.
*/
#ifndef _RTE_CRYPTODEV_H_
#define _RTE_CRYPTODEV_H_
/**
* @file rte_cryptodev.h
*
* RTE Cryptographic Device APIs
*
* Defines RTE Crypto Device APIs for the provisioning of cipher and
* authentication operations.
*/
#ifdef __cplusplus
extern "C" {
#endif
#include "rte_kvargs.h"
#include "rte_crypto.h"
#include "rte_dev.h"
#include <rte_common.h>
#include <rte_config.h>
extern const char **rte_cyptodev_names;
/* Logging Macros */
#define CDEV_LOG_ERR(...) \
RTE_LOG(ERR, CRYPTODEV, \
RTE_FMT("%s() line %u: " RTE_FMT_HEAD(__VA_ARGS__,) "\n", \
__func__, __LINE__, RTE_FMT_TAIL(__VA_ARGS__,)))
#define CDEV_LOG_INFO(...) \
RTE_LOG(INFO, CRYPTODEV, \
RTE_FMT(RTE_FMT_HEAD(__VA_ARGS__,) "\n", \
RTE_FMT_TAIL(__VA_ARGS__,)))
#define CDEV_LOG_DEBUG(...) \
RTE_LOG(DEBUG, CRYPTODEV, \
RTE_FMT("%s() line %u: " RTE_FMT_HEAD(__VA_ARGS__,) "\n", \
__func__, __LINE__, RTE_FMT_TAIL(__VA_ARGS__,)))
#define CDEV_PMD_TRACE(...) \
RTE_LOG(DEBUG, CRYPTODEV, \
RTE_FMT("[%s] %s: " RTE_FMT_HEAD(__VA_ARGS__,) "\n", \
dev, __func__, RTE_FMT_TAIL(__VA_ARGS__,)))
/**
* A macro that points to an offset from the start
* of the crypto operation structure (rte_crypto_op)
*
* The returned pointer is cast to type t.
*
* @param c
* The crypto operation.
* @param o
* The offset from the start of the crypto operation.
* @param t
* The type to cast the result into.
*/
#define rte_crypto_op_ctod_offset(c, t, o) \
((t)((char *)(c) + (o)))
/**
* A macro that returns the physical address that points
* to an offset from the start of the crypto operation
* (rte_crypto_op)
*
* @param c
* The crypto operation.
* @param o
* The offset from the start of the crypto operation
* to calculate address from.
*/
#define rte_crypto_op_ctophys_offset(c, o) \
(rte_iova_t)((c)->phys_addr + (o))
/**
* Crypto parameters range description
*/
struct rte_crypto_param_range {
uint16_t min; /**< minimum size */
uint16_t max; /**< maximum size */
uint16_t increment;
/**< if a range of sizes are supported,
* this parameter is used to indicate
* increments in byte size that are supported
* between the minimum and maximum
*/
};
/**
* Symmetric Crypto Capability
*/
struct rte_cryptodev_symmetric_capability {
enum rte_crypto_sym_xform_type xform_type;
/**< Transform type : Authentication / Cipher / AEAD */
RTE_STD_C11
union {
struct {
enum rte_crypto_auth_algorithm algo;
/**< authentication algorithm */
uint16_t block_size;
/**< algorithm block size */
struct rte_crypto_param_range key_size;
/**< auth key size range */
struct rte_crypto_param_range digest_size;
/**< digest size range */
struct rte_crypto_param_range aad_size;
/**< Additional authentication data size range */
struct rte_crypto_param_range iv_size;
/**< Initialisation vector data size range */
} auth;
/**< Symmetric Authentication transform capabilities */
struct {
enum rte_crypto_cipher_algorithm algo;
/**< cipher algorithm */
uint16_t block_size;
/**< algorithm block size */
struct rte_crypto_param_range key_size;
/**< cipher key size range */
struct rte_crypto_param_range iv_size;
/**< Initialisation vector data size range */
} cipher;
/**< Symmetric Cipher transform capabilities */
struct {
enum rte_crypto_aead_algorithm algo;
/**< AEAD algorithm */
uint16_t block_size;
/**< algorithm block size */
struct rte_crypto_param_range key_size;
/**< AEAD key size range */
struct rte_crypto_param_range digest_size;
/**< digest size range */
struct rte_crypto_param_range aad_size;
/**< Additional authentication data size range */
struct rte_crypto_param_range iv_size;
/**< Initialisation vector data size range */
} aead;
};
};
/**
* Asymmetric Xform Crypto Capability
*
*/
struct rte_cryptodev_asymmetric_xform_capability {
enum rte_crypto_asym_xform_type xform_type;
/**< Transform type: RSA/MODEXP/DH/DSA/MODINV */
uint32_t op_types;
/**< bitmask for supported rte_crypto_asym_op_type */
__extension__
union {
struct rte_crypto_param_range modlen;
/**< Range of modulus length supported by modulus based xform.
* Value 0 mean implementation default
*/
};
};
/**
* Asymmetric Crypto Capability
*
*/
struct rte_cryptodev_asymmetric_capability {
struct rte_cryptodev_asymmetric_xform_capability xform_capa;
};
/** Structure used to capture a capability of a crypto device */
struct rte_cryptodev_capabilities {
enum rte_crypto_op_type op;
/**< Operation type */
RTE_STD_C11
union {
struct rte_cryptodev_symmetric_capability sym;
/**< Symmetric operation capability parameters */
struct rte_cryptodev_asymmetric_capability asym;
/**< Asymmetric operation capability parameters */
};
};
/** Structure used to describe crypto algorithms */
struct rte_cryptodev_sym_capability_idx {
enum rte_crypto_sym_xform_type type;
union {
enum rte_crypto_cipher_algorithm cipher;
enum rte_crypto_auth_algorithm auth;
enum rte_crypto_aead_algorithm aead;
} algo;
};
/**
* Structure used to describe asymmetric crypto xforms
* Each xform maps to one asym algorithm.
*
*/
struct rte_cryptodev_asym_capability_idx {
enum rte_crypto_asym_xform_type type;
/**< Asymmetric xform (algo) type */
};
/**
* Provide capabilities available for defined device and algorithm
*
* @param dev_id The identifier of the device.
* @param idx Description of crypto algorithms.
*
* @return
* - Return description of the symmetric crypto capability if exist.
* - Return NULL if the capability not exist.
*/
const struct rte_cryptodev_symmetric_capability *
rte_cryptodev_sym_capability_get(uint8_t dev_id,
const struct rte_cryptodev_sym_capability_idx *idx);
/**
* Provide capabilities available for defined device and xform
*
* @param dev_id The identifier of the device.
* @param idx Description of asym crypto xform.
*
* @return
* - Return description of the asymmetric crypto capability if exist.
* - Return NULL if the capability not exist.
*/
__rte_experimental
const struct rte_cryptodev_asymmetric_xform_capability *
rte_cryptodev_asym_capability_get(uint8_t dev_id,
const struct rte_cryptodev_asym_capability_idx *idx);
/**
* Check if key size and initial vector are supported
* in crypto cipher capability
*
* @param capability Description of the symmetric crypto capability.
* @param key_size Cipher key size.
* @param iv_size Cipher initial vector size.
*
* @return
* - Return 0 if the parameters are in range of the capability.
* - Return -1 if the parameters are out of range of the capability.
*/
int
rte_cryptodev_sym_capability_check_cipher(
const struct rte_cryptodev_symmetric_capability *capability,
uint16_t key_size, uint16_t iv_size);
/**
* Check if key size and initial vector are supported
* in crypto auth capability
*
* @param capability Description of the symmetric crypto capability.
* @param key_size Auth key size.
* @param digest_size Auth digest size.
* @param iv_size Auth initial vector size.
*
* @return
* - Return 0 if the parameters are in range of the capability.
* - Return -1 if the parameters are out of range of the capability.
*/
int
rte_cryptodev_sym_capability_check_auth(
const struct rte_cryptodev_symmetric_capability *capability,
uint16_t key_size, uint16_t digest_size, uint16_t iv_size);
/**
* Check if key, digest, AAD and initial vector sizes are supported
* in crypto AEAD capability
*
* @param capability Description of the symmetric crypto capability.
* @param key_size AEAD key size.
* @param digest_size AEAD digest size.
* @param aad_size AEAD AAD size.
* @param iv_size AEAD IV size.
*
* @return
* - Return 0 if the parameters are in range of the capability.
* - Return -1 if the parameters are out of range of the capability.
*/
int
rte_cryptodev_sym_capability_check_aead(
const struct rte_cryptodev_symmetric_capability *capability,
uint16_t key_size, uint16_t digest_size, uint16_t aad_size,
uint16_t iv_size);
/**
* Check if op type is supported
*
* @param capability Description of the asymmetric crypto capability.
* @param op_type op type
*
* @return
* - Return 1 if the op type is supported
* - Return 0 if unsupported
*/
__rte_experimental
int
rte_cryptodev_asym_xform_capability_check_optype(
const struct rte_cryptodev_asymmetric_xform_capability *capability,
enum rte_crypto_asym_op_type op_type);
/**
* Check if modulus length is in supported range
*
* @param capability Description of the asymmetric crypto capability.
* @param modlen modulus length.
*
* @return
* - Return 0 if the parameters are in range of the capability.
* - Return -1 if the parameters are out of range of the capability.
*/
__rte_experimental
int
rte_cryptodev_asym_xform_capability_check_modlen(
const struct rte_cryptodev_asymmetric_xform_capability *capability,
uint16_t modlen);
/**
* Provide the cipher algorithm enum, given an algorithm string
*
* @param algo_enum A pointer to the cipher algorithm
* enum to be filled
* @param algo_string Authentication algo string
*
* @return
* - Return -1 if string is not valid
* - Return 0 is the string is valid
*/
int
rte_cryptodev_get_cipher_algo_enum(enum rte_crypto_cipher_algorithm *algo_enum,
const char *algo_string);
/**
* Provide the authentication algorithm enum, given an algorithm string
*
* @param algo_enum A pointer to the authentication algorithm
* enum to be filled
* @param algo_string Authentication algo string
*
* @return
* - Return -1 if string is not valid
* - Return 0 is the string is valid
*/
int
rte_cryptodev_get_auth_algo_enum(enum rte_crypto_auth_algorithm *algo_enum,
const char *algo_string);
/**
* Provide the AEAD algorithm enum, given an algorithm string
*
* @param algo_enum A pointer to the AEAD algorithm
* enum to be filled
* @param algo_string AEAD algorithm string
*
* @return
* - Return -1 if string is not valid
* - Return 0 is the string is valid
*/
int
rte_cryptodev_get_aead_algo_enum(enum rte_crypto_aead_algorithm *algo_enum,
const char *algo_string);
/**
* Provide the Asymmetric xform enum, given an xform string
*
* @param xform_enum A pointer to the xform type
* enum to be filled
* @param xform_string xform string
*
* @return
* - Return -1 if string is not valid
* - Return 0 if the string is valid
*/
__rte_experimental
int
rte_cryptodev_asym_get_xform_enum(enum rte_crypto_asym_xform_type *xform_enum,
const char *xform_string);
/** Macro used at end of crypto PMD list */
#define RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST() \
{ RTE_CRYPTO_OP_TYPE_UNDEFINED }
/**
* Crypto device supported feature flags
*
* Note:
* New features flags should be added to the end of the list
*
* Keep these flags synchronised with rte_cryptodev_get_feature_name()
*/
#define RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO (1ULL << 0)
/**< Symmetric crypto operations are supported */
#define RTE_CRYPTODEV_FF_ASYMMETRIC_CRYPTO (1ULL << 1)
/**< Asymmetric crypto operations are supported */
#define RTE_CRYPTODEV_FF_SYM_OPERATION_CHAINING (1ULL << 2)
/**< Chaining symmetric crypto operations are supported */
#define RTE_CRYPTODEV_FF_CPU_SSE (1ULL << 3)
/**< Utilises CPU SIMD SSE instructions */
#define RTE_CRYPTODEV_FF_CPU_AVX (1ULL << 4)
/**< Utilises CPU SIMD AVX instructions */
#define RTE_CRYPTODEV_FF_CPU_AVX2 (1ULL << 5)
/**< Utilises CPU SIMD AVX2 instructions */
#define RTE_CRYPTODEV_FF_CPU_AESNI (1ULL << 6)
/**< Utilises CPU AES-NI instructions */
#define RTE_CRYPTODEV_FF_HW_ACCELERATED (1ULL << 7)
/**< Operations are off-loaded to an
* external hardware accelerator
*/
#define RTE_CRYPTODEV_FF_CPU_AVX512 (1ULL << 8)
/**< Utilises CPU SIMD AVX512 instructions */
#define RTE_CRYPTODEV_FF_IN_PLACE_SGL (1ULL << 9)
/**< In-place Scatter-gather (SGL) buffers, with multiple segments,
* are supported
*/
#define RTE_CRYPTODEV_FF_OOP_SGL_IN_SGL_OUT (1ULL << 10)
/**< Out-of-place Scatter-gather (SGL) buffers are
* supported in input and output
*/
#define RTE_CRYPTODEV_FF_OOP_SGL_IN_LB_OUT (1ULL << 11)
/**< Out-of-place Scatter-gather (SGL) buffers are supported
* in input, combined with linear buffers (LB), with a
* single segment in output
*/
#define RTE_CRYPTODEV_FF_OOP_LB_IN_SGL_OUT (1ULL << 12)
/**< Out-of-place Scatter-gather (SGL) buffers are supported
* in output, combined with linear buffers (LB) in input
*/
#define RTE_CRYPTODEV_FF_OOP_LB_IN_LB_OUT (1ULL << 13)
/**< Out-of-place linear buffers (LB) are supported in input and output */
#define RTE_CRYPTODEV_FF_CPU_NEON (1ULL << 14)
/**< Utilises CPU NEON instructions */
#define RTE_CRYPTODEV_FF_CPU_ARM_CE (1ULL << 15)
/**< Utilises ARM CPU Cryptographic Extensions */
#define RTE_CRYPTODEV_FF_SECURITY (1ULL << 16)
/**< Support Security Protocol Processing */
#define RTE_CRYPTODEV_FF_RSA_PRIV_OP_KEY_EXP (1ULL << 17)
/**< Support RSA Private Key OP with exponent */
#define RTE_CRYPTODEV_FF_RSA_PRIV_OP_KEY_QT (1ULL << 18)
/**< Support RSA Private Key OP with CRT (quintuple) Keys */
#define RTE_CRYPTODEV_FF_DIGEST_ENCRYPTED (1ULL << 19)
/**< Support encrypted-digest operations where digest is appended to data */
/**
* Get the name of a crypto device feature flag
*
* @param flag The mask describing the flag.
*
* @return
* The name of this flag, or NULL if it's not a valid feature flag.
*/
extern const char *
rte_cryptodev_get_feature_name(uint64_t flag);
/** Crypto device information */
struct rte_cryptodev_info {
const char *driver_name; /**< Driver name. */
uint8_t driver_id; /**< Driver identifier */
struct rte_device *device; /**< Generic device information. */
uint64_t feature_flags;
/**< Feature flags exposes HW/SW features for the given device */
const struct rte_cryptodev_capabilities *capabilities;
/**< Array of devices supported capabilities */
unsigned max_nb_queue_pairs;
/**< Maximum number of queues pairs supported by device. */
uint16_t min_mbuf_headroom_req;
/**< Minimum mbuf headroom required by device */
uint16_t min_mbuf_tailroom_req;
/**< Minimum mbuf tailroom required by device */
struct {
unsigned max_nb_sessions;
/**< Maximum number of sessions supported by device.
* If 0, the device does not have any limitation in
* number of sessions that can be used.
*/
} sym;
};
#define RTE_CRYPTODEV_DETACHED (0)
#define RTE_CRYPTODEV_ATTACHED (1)
/** Definitions of Crypto device event types */
enum rte_cryptodev_event_type {
RTE_CRYPTODEV_EVENT_UNKNOWN, /**< unknown event type */
RTE_CRYPTODEV_EVENT_ERROR, /**< error interrupt event */
RTE_CRYPTODEV_EVENT_MAX /**< max value of this enum */
};
/** Crypto device queue pair configuration structure. */
struct rte_cryptodev_qp_conf {
uint32_t nb_descriptors; /**< Number of descriptors per queue pair */
struct rte_mempool *mp_session;
/**< The mempool for creating session in sessionless mode */
struct rte_mempool *mp_session_private;
/**< The mempool for creating sess private data in sessionless mode */
};
/**
* Typedef for application callback function to be registered by application
* software for notification of device events
*
* @param dev_id Crypto device identifier
* @param event Crypto device event to register for notification of.
* @param cb_arg User specified parameter to be passed as to passed to
* users callback function.
*/
typedef void (*rte_cryptodev_cb_fn)(uint8_t dev_id,
enum rte_cryptodev_event_type event, void *cb_arg);
/** Crypto Device statistics */
struct rte_cryptodev_stats {
uint64_t enqueued_count;
/**< Count of all operations enqueued */
uint64_t dequeued_count;
/**< Count of all operations dequeued */
uint64_t enqueue_err_count;
/**< Total error count on operations enqueued */
uint64_t dequeue_err_count;
/**< Total error count on operations dequeued */
};
#define RTE_CRYPTODEV_NAME_MAX_LEN (64)
/**< Max length of name of crypto PMD */
/**
* Get the device identifier for the named crypto device.
*
* @param name device name to select the device structure.
*
* @return
* - Returns crypto device identifier on success.
* - Return -1 on failure to find named crypto device.
*/
extern int
rte_cryptodev_get_dev_id(const char *name);
/**
* Get the crypto device name given a device identifier.
*
* @param dev_id
* The identifier of the device
*
* @return
* - Returns crypto device name.
* - Returns NULL if crypto device is not present.
*/
extern const char *
rte_cryptodev_name_get(uint8_t dev_id);
/**
* Get the total number of crypto devices that have been successfully
* initialised.
*
* @return
* - The total number of usable crypto devices.
*/
extern uint8_t
rte_cryptodev_count(void);
/**
* Get number of crypto device defined type.
*
* @param driver_id driver identifier.
*
* @return
* Returns number of crypto device.
*/
extern uint8_t
rte_cryptodev_device_count_by_driver(uint8_t driver_id);
/**
* Get number and identifiers of attached crypto devices that
* use the same crypto driver.
*
* @param driver_name driver name.
* @param devices output devices identifiers.
* @param nb_devices maximal number of devices.
*
* @return
* Returns number of attached crypto device.
*/
uint8_t
rte_cryptodev_devices_get(const char *driver_name, uint8_t *devices,
uint8_t nb_devices);
/*
* Return the NUMA socket to which a device is connected
*
* @param dev_id
* The identifier of the device
* @return
* The NUMA socket id to which the device is connected or
* a default of zero if the socket could not be determined.
* -1 if returned is the dev_id value is out of range.
*/
extern int
rte_cryptodev_socket_id(uint8_t dev_id);
/** Crypto device configuration structure */
struct rte_cryptodev_config {
int socket_id; /**< Socket to allocate resources on */
uint16_t nb_queue_pairs;
/**< Number of queue pairs to configure on device */
uint64_t ff_disable;
/**< Feature flags to be disabled. Only the following features are
* allowed to be disabled,
* - RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO
* - RTE_CRYPTODEV_FF_ASYMMETRIC_CRYPTO
* - RTE_CRYTPODEV_FF_SECURITY
*/
};
/**
* Configure a device.
*
* This function must be invoked first before any other function in the
* API. This function can also be re-invoked when a device is in the
* stopped state.
*
* @param dev_id The identifier of the device to configure.
* @param config The crypto device configuration structure.
*
* @return
* - 0: Success, device configured.
* - <0: Error code returned by the driver configuration function.
*/
extern int
rte_cryptodev_configure(uint8_t dev_id, struct rte_cryptodev_config *config);
/**
* Start an device.
*
* The device start step is the last one and consists of setting the configured
* offload features and in starting the transmit and the receive units of the
* device.
* On success, all basic functions exported by the API (link status,
* receive/transmit, and so on) can be invoked.
*
* @param dev_id
* The identifier of the device.
* @return
* - 0: Success, device started.
* - <0: Error code of the driver device start function.
*/
extern int
rte_cryptodev_start(uint8_t dev_id);
/**
* Stop an device. The device can be restarted with a call to
* rte_cryptodev_start()
*
* @param dev_id The identifier of the device.
*/
extern void
rte_cryptodev_stop(uint8_t dev_id);
/**
* Close an device. The device cannot be restarted!
*
* @param dev_id The identifier of the device.
*
* @return
* - 0 on successfully closing device
* - <0 on failure to close device
*/
extern int
rte_cryptodev_close(uint8_t dev_id);
/**
* Allocate and set up a receive queue pair for a device.
*
*
* @param dev_id The identifier of the device.
* @param queue_pair_id The index of the queue pairs to set up. The
* value must be in the range [0, nb_queue_pair
* - 1] previously supplied to
* rte_cryptodev_configure().
* @param qp_conf The pointer to the configuration data to be
* used for the queue pair.
* @param socket_id The *socket_id* argument is the socket
* identifier in case of NUMA. The value can be
* *SOCKET_ID_ANY* if there is no NUMA constraint
* for the DMA memory allocated for the receive
* queue pair.
*
* @return
* - 0: Success, queue pair correctly set up.
* - <0: Queue pair configuration failed
*/
extern int
rte_cryptodev_queue_pair_setup(uint8_t dev_id, uint16_t queue_pair_id,
const struct rte_cryptodev_qp_conf *qp_conf, int socket_id);
/**
* Get the number of queue pairs on a specific crypto device
*
* @param dev_id Crypto device identifier.
* @return
* - The number of configured queue pairs.
*/
extern uint16_t
rte_cryptodev_queue_pair_count(uint8_t dev_id);
/**
* Retrieve the general I/O statistics of a device.
*
* @param dev_id The identifier of the device.
* @param stats A pointer to a structure of type
* *rte_cryptodev_stats* to be filled with the
* values of device counters.
* @return
* - Zero if successful.
* - Non-zero otherwise.
*/
extern int
rte_cryptodev_stats_get(uint8_t dev_id, struct rte_cryptodev_stats *stats);
/**
* Reset the general I/O statistics of a device.
*
* @param dev_id The identifier of the device.
*/
extern void
rte_cryptodev_stats_reset(uint8_t dev_id);
/**
* Retrieve the contextual information of a device.
*
* @param dev_id The identifier of the device.
* @param dev_info A pointer to a structure of type
* *rte_cryptodev_info* to be filled with the
* contextual information of the device.
*
* @note The capabilities field of dev_info is set to point to the first
* element of an array of struct rte_cryptodev_capabilities. The element after
* the last valid element has it's op field set to
* RTE_CRYPTO_OP_TYPE_UNDEFINED.
*/
extern void
rte_cryptodev_info_get(uint8_t dev_id, struct rte_cryptodev_info *dev_info);
/**
* Register a callback function for specific device id.
*
* @param dev_id Device id.
* @param event Event interested.
* @param cb_fn User supplied callback function to be called.
* @param cb_arg Pointer to the parameters for the registered
* callback.
*
* @return
* - On success, zero.
* - On failure, a negative value.
*/
extern int
rte_cryptodev_callback_register(uint8_t dev_id,
enum rte_cryptodev_event_type event,
rte_cryptodev_cb_fn cb_fn, void *cb_arg);
/**
* Unregister a callback function for specific device id.
*
* @param dev_id The device identifier.
* @param event Event interested.
* @param cb_fn User supplied callback function to be called.
* @param cb_arg Pointer to the parameters for the registered
* callback.
*
* @return
* - On success, zero.
* - On failure, a negative value.
*/
extern int
rte_cryptodev_callback_unregister(uint8_t dev_id,
enum rte_cryptodev_event_type event,
rte_cryptodev_cb_fn cb_fn, void *cb_arg);
typedef uint16_t (*dequeue_pkt_burst_t)(void *qp,
struct rte_crypto_op **ops, uint16_t nb_ops);
/**< Dequeue processed packets from queue pair of a device. */
typedef uint16_t (*enqueue_pkt_burst_t)(void *qp,
struct rte_crypto_op **ops, uint16_t nb_ops);
/**< Enqueue packets for processing on queue pair of a device. */
struct rte_cryptodev_callback;
/** Structure to keep track of registered callbacks */
TAILQ_HEAD(rte_cryptodev_cb_list, rte_cryptodev_callback);
/** The data structure associated with each crypto device. */
struct rte_cryptodev {
dequeue_pkt_burst_t dequeue_burst;
/**< Pointer to PMD receive function. */
enqueue_pkt_burst_t enqueue_burst;
/**< Pointer to PMD transmit function. */
struct rte_cryptodev_data *data;
/**< Pointer to device data */
struct rte_cryptodev_ops *dev_ops;
/**< Functions exported by PMD */
uint64_t feature_flags;
/**< Feature flags exposes HW/SW features for the given device */
struct rte_device *device;
/**< Backing device */
uint8_t driver_id;
/**< Crypto driver identifier*/
struct rte_cryptodev_cb_list link_intr_cbs;
/**< User application callback for interrupts if present */
void *security_ctx;
/**< Context for security ops */
__extension__
uint8_t attached : 1;
/**< Flag indicating the device is attached */
} __rte_cache_aligned;
void *
rte_cryptodev_get_sec_ctx(uint8_t dev_id);
/**
*
* The data part, with no function pointers, associated with each device.
*
* This structure is safe to place in shared memory to be common among
* different processes in a multi-process configuration.
*/
struct rte_cryptodev_data {
uint8_t dev_id;
/**< Device ID for this instance */
uint8_t socket_id;
/**< Socket ID where memory is allocated */
char name[RTE_CRYPTODEV_NAME_MAX_LEN];
/**< Unique identifier name */
__extension__
uint8_t dev_started : 1;
/**< Device state: STARTED(1)/STOPPED(0) */
struct rte_mempool *session_pool;
/**< Session memory pool */
void **queue_pairs;
/**< Array of pointers to queue pairs. */
uint16_t nb_queue_pairs;
/**< Number of device queue pairs. */
void *dev_private;
/**< PMD-specific private data */
} __rte_cache_aligned;
extern struct rte_cryptodev *rte_cryptodevs;
/**
*
* Dequeue a burst of processed crypto operations from a queue on the crypto
* device. The dequeued operation are stored in *rte_crypto_op* structures
* whose pointers are supplied in the *ops* array.
*
* The rte_cryptodev_dequeue_burst() function returns the number of ops
* actually dequeued, which is the number of *rte_crypto_op* data structures
* effectively supplied into the *ops* array.
*
* A return value equal to *nb_ops* indicates that the queue contained
* at least *nb_ops* operations, and this is likely to signify that other
* processed operations remain in the devices output queue. Applications
* implementing a "retrieve as many processed operations as possible" policy
* can check this specific case and keep invoking the
* rte_cryptodev_dequeue_burst() function until a value less than
* *nb_ops* is returned.
*
* The rte_cryptodev_dequeue_burst() function does not provide any error
* notification to avoid the corresponding overhead.
*
* @param dev_id The symmetric crypto device identifier
* @param qp_id The index of the queue pair from which to
* retrieve processed packets. The value must be
* in the range [0, nb_queue_pair - 1] previously
* supplied to rte_cryptodev_configure().
* @param ops The address of an array of pointers to
* *rte_crypto_op* structures that must be
* large enough to store *nb_ops* pointers in it.
* @param nb_ops The maximum number of operations to dequeue.
*
* @return
* - The number of operations actually dequeued, which is the number
* of pointers to *rte_crypto_op* structures effectively supplied to the
* *ops* array.
*/
static inline uint16_t
rte_cryptodev_dequeue_burst(uint8_t dev_id, uint16_t qp_id,
struct rte_crypto_op **ops, uint16_t nb_ops)
{
struct rte_cryptodev *dev = &rte_cryptodevs[dev_id];
nb_ops = (*dev->dequeue_burst)
(dev->data->queue_pairs[qp_id], ops, nb_ops);
return nb_ops;
}
/**
* Enqueue a burst of operations for processing on a crypto device.
*
* The rte_cryptodev_enqueue_burst() function is invoked to place
* crypto operations on the queue *qp_id* of the device designated by
* its *dev_id*.
*
* The *nb_ops* parameter is the number of operations to process which are
* supplied in the *ops* array of *rte_crypto_op* structures.
*
* The rte_cryptodev_enqueue_burst() function returns the number of
* operations it actually enqueued for processing. A return value equal to
* *nb_ops* means that all packets have been enqueued.
*
* @param dev_id The identifier of the device.
* @param qp_id The index of the queue pair which packets are
* to be enqueued for processing. The value
* must be in the range [0, nb_queue_pairs - 1]
* previously supplied to
* *rte_cryptodev_configure*.
* @param ops The address of an array of *nb_ops* pointers
* to *rte_crypto_op* structures which contain
* the crypto operations to be processed.
* @param nb_ops The number of operations to process.
*
* @return
* The number of operations actually enqueued on the crypto device. The return
* value can be less than the value of the *nb_ops* parameter when the
* crypto devices queue is full or if invalid parameters are specified in
* a *rte_crypto_op*.
*/
static inline uint16_t
rte_cryptodev_enqueue_burst(uint8_t dev_id, uint16_t qp_id,
struct rte_crypto_op **ops, uint16_t nb_ops)
{
struct rte_cryptodev *dev = &rte_cryptodevs[dev_id];
return (*dev->enqueue_burst)(
dev->data->queue_pairs[qp_id], ops, nb_ops);
}
/** Cryptodev symmetric crypto session
* Each session is derived from a fixed xform chain. Therefore each session
* has a fixed algo, key, op-type, digest_len etc.
*/
struct rte_cryptodev_sym_session {
uint64_t opaque_data;
/**< Can be used for external metadata */
uint16_t nb_drivers;
/**< number of elements in sess_data array */
uint16_t user_data_sz;
/**< session user data will be placed after sess_data */
__extension__ struct {
void *data;
uint16_t refcnt;
} sess_data[0];
/**< Driver specific session material, variable size */
};
/** Cryptodev asymmetric crypto session */
struct rte_cryptodev_asym_session {
__extension__ void *sess_private_data[0];
/**< Private asymmetric session material */
};
/**
* Create a symmetric session mempool.
*
* @param name
* The unique mempool name.
* @param nb_elts
* The number of elements in the mempool.
* @param elt_size
* The size of the element. This value will be ignored if it is smaller than
* the minimum session header size required for the system. For the user who
* want to use the same mempool for sym session and session private data it
* can be the maximum value of all existing devices' private data and session
* header sizes.
* @param cache_size
* The number of per-lcore cache elements
* @param priv_size
* The private data size of each session.
* @param socket_id
* The *socket_id* argument is the socket identifier in the case of
* NUMA. The value can be *SOCKET_ID_ANY* if there is no NUMA
* constraint for the reserved zone.
*
* @return
* - On success return size of the session
* - On failure returns 0
*/
__rte_experimental
struct rte_mempool *
rte_cryptodev_sym_session_pool_create(const char *name, uint32_t nb_elts,
uint32_t elt_size, uint32_t cache_size, uint16_t priv_size,
int socket_id);
/**
* Create symmetric crypto session header (generic with no private data)
*
* @param mempool Symmetric session mempool to allocate session
* objects from
* @return
* - On success return pointer to sym-session
* - On failure returns NULL
*/
struct rte_cryptodev_sym_session *
rte_cryptodev_sym_session_create(struct rte_mempool *mempool);
/**
* Create asymmetric crypto session header (generic with no private data)
*
* @param mempool mempool to allocate asymmetric session
* objects from
* @return
* - On success return pointer to asym-session
* - On failure returns NULL
*/
__rte_experimental
struct rte_cryptodev_asym_session *
rte_cryptodev_asym_session_create(struct rte_mempool *mempool);
/**
* Frees symmetric crypto session header, after checking that all
* the device private data has been freed, returning it
* to its original mempool.
*
* @param sess Session header to be freed.
*
* @return
* - 0 if successful.
* - -EINVAL if session is NULL.
* - -EBUSY if not all device private data has been freed.
*/
int
rte_cryptodev_sym_session_free(struct rte_cryptodev_sym_session *sess);
/**
* Frees asymmetric crypto session header, after checking that all
* the device private data has been freed, returning it
* to its original mempool.
*
* @param sess Session header to be freed.
*
* @return
* - 0 if successful.
* - -EINVAL if session is NULL.
* - -EBUSY if not all device private data has been freed.
*/
__rte_experimental
int
rte_cryptodev_asym_session_free(struct rte_cryptodev_asym_session *sess);
/**
* Fill out private data for the device id, based on its device type.
*
* @param dev_id ID of device that we want the session to be used on
* @param sess Session where the private data will be attached to
* @param xforms Symmetric crypto transform operations to apply on flow
* processed with this session
* @param mempool Mempool where the private data is allocated.
*
* @return
* - On success, zero.
* - -EINVAL if input parameters are invalid.
* - -ENOTSUP if crypto device does not support the crypto transform or
* does not support symmetric operations.
* - -ENOMEM if the private session could not be allocated.
*/
int
rte_cryptodev_sym_session_init(uint8_t dev_id,
struct rte_cryptodev_sym_session *sess,
struct rte_crypto_sym_xform *xforms,
struct rte_mempool *mempool);
/**
* Initialize asymmetric session on a device with specific asymmetric xform
*
* @param dev_id ID of device that we want the session to be used on
* @param sess Session to be set up on a device
* @param xforms Asymmetric crypto transform operations to apply on flow
* processed with this session
* @param mempool Mempool to be used for internal allocation.
*
* @return
* - On success, zero.
* - -EINVAL if input parameters are invalid.
* - -ENOTSUP if crypto device does not support the crypto transform.
* - -ENOMEM if the private session could not be allocated.
*/
__rte_experimental
int
rte_cryptodev_asym_session_init(uint8_t dev_id,
struct rte_cryptodev_asym_session *sess,
struct rte_crypto_asym_xform *xforms,
struct rte_mempool *mempool);
/**
* Frees private data for the device id, based on its device type,
* returning it to its mempool. It is the application's responsibility
* to ensure that private session data is not cleared while there are
* still in-flight operations using it.
*
* @param dev_id ID of device that uses the session.
* @param sess Session containing the reference to the private data
*
* @return
* - 0 if successful.
* - -EINVAL if device is invalid or session is NULL.
* - -ENOTSUP if crypto device does not support symmetric operations.
*/
int
rte_cryptodev_sym_session_clear(uint8_t dev_id,
struct rte_cryptodev_sym_session *sess);
/**
* Frees resources held by asymmetric session during rte_cryptodev_session_init
*
* @param dev_id ID of device that uses the asymmetric session.
* @param sess Asymmetric session setup on device using
* rte_cryptodev_session_init
* @return
* - 0 if successful.
* - -EINVAL if device is invalid or session is NULL.
*/
__rte_experimental
int
rte_cryptodev_asym_session_clear(uint8_t dev_id,
struct rte_cryptodev_asym_session *sess);
/**
* Get the size of the header session, for all registered drivers excluding
* the user data size.
*
* @return
* Size of the symmetric header session.
*/
unsigned int
rte_cryptodev_sym_get_header_session_size(void);
/**
* Get the size of the header session from created session.
*
* @param sess
* The sym cryptodev session pointer
*
* @return
* - If sess is not NULL, return the size of the header session including
* the private data size defined within sess.
* - If sess is NULL, return 0.
*/
__rte_experimental
unsigned int
rte_cryptodev_sym_get_existing_header_session_size(
struct rte_cryptodev_sym_session *sess);
/**
* Get the size of the asymmetric session header, for all registered drivers.
*
* @return
* Size of the asymmetric header session.
*/
__rte_experimental
unsigned int
rte_cryptodev_asym_get_header_session_size(void);
/**
* Get the size of the private symmetric session data
* for a device.
*
* @param dev_id The device identifier.
*
* @return
* - Size of the private data, if successful
* - 0 if device is invalid or does not have private
* symmetric session
*/
unsigned int
rte_cryptodev_sym_get_private_session_size(uint8_t dev_id);
/**
* Get the size of the private data for asymmetric session
* on device
*
* @param dev_id The device identifier.
*
* @return
* - Size of the asymmetric private data, if successful
* - 0 if device is invalid or does not have private session
*/
__rte_experimental
unsigned int
rte_cryptodev_asym_get_private_session_size(uint8_t dev_id);
/**
* Provide driver identifier.
*
* @param name
* The pointer to a driver name.
* @return
* The driver type identifier or -1 if no driver found
*/
int rte_cryptodev_driver_id_get(const char *name);
/**
* Provide driver name.
*
* @param driver_id
* The driver identifier.
* @return
* The driver name or null if no driver found
*/
const char *rte_cryptodev_driver_name_get(uint8_t driver_id);
/**
* Store user data in a session.
*
* @param sess Session pointer allocated by
* *rte_cryptodev_sym_session_create*.
* @param data Pointer to the user data.
* @param size Size of the user data.
*
* @return
* - On success, zero.
* - On failure, a negative value.
*/
__rte_experimental
int
rte_cryptodev_sym_session_set_user_data(
struct rte_cryptodev_sym_session *sess,
void *data,
uint16_t size);
/**
* Get user data stored in a session.
*
* @param sess Session pointer allocated by
* *rte_cryptodev_sym_session_create*.
*
* @return
* - On success return pointer to user data.
* - On failure returns NULL.
*/
__rte_experimental
void *
rte_cryptodev_sym_session_get_user_data(
struct rte_cryptodev_sym_session *sess);
#ifdef __cplusplus
}
#endif
#endif /* _RTE_CRYPTODEV_H_ */