cfacca202f
The new virtchnl protocol header types for IPv4 and IPv6 fragment are
not added in order, which will break ABI. Move them to the end of the
list.
Fixes: e6a42fd915 ("common/iavf: add protocol header for IP fragment")
Cc: stable@dpdk.org
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
2204 lines
73 KiB
C
2204 lines
73 KiB
C
/* SPDX-License-Identifier: BSD-3-Clause
|
|
* Copyright(c) 2001-2021 Intel Corporation
|
|
*/
|
|
|
|
#ifndef _VIRTCHNL_H_
|
|
#define _VIRTCHNL_H_
|
|
|
|
/* Description:
|
|
* This header file describes the Virtual Function (VF) - Physical Function
|
|
* (PF) communication protocol used by the drivers for all devices starting
|
|
* from our 40G product line
|
|
*
|
|
* Admin queue buffer usage:
|
|
* desc->opcode is always aqc_opc_send_msg_to_pf
|
|
* flags, retval, datalen, and data addr are all used normally.
|
|
* The Firmware copies the cookie fields when sending messages between the
|
|
* PF and VF, but uses all other fields internally. Due to this limitation,
|
|
* we must send all messages as "indirect", i.e. using an external buffer.
|
|
*
|
|
* All the VSI indexes are relative to the VF. Each VF can have maximum of
|
|
* three VSIs. All the queue indexes are relative to the VSI. Each VF can
|
|
* have a maximum of sixteen queues for all of its VSIs.
|
|
*
|
|
* The PF is required to return a status code in v_retval for all messages
|
|
* except RESET_VF, which does not require any response. The returned value
|
|
* is of virtchnl_status_code type, defined in the shared type.h.
|
|
*
|
|
* In general, VF driver initialization should roughly follow the order of
|
|
* these opcodes. The VF driver must first validate the API version of the
|
|
* PF driver, then request a reset, then get resources, then configure
|
|
* queues and interrupts. After these operations are complete, the VF
|
|
* driver may start its queues, optionally add MAC and VLAN filters, and
|
|
* process traffic.
|
|
*/
|
|
|
|
/* START GENERIC DEFINES
|
|
* Need to ensure the following enums and defines hold the same meaning and
|
|
* value in current and future projects
|
|
*/
|
|
|
|
/* Error Codes */
|
|
enum virtchnl_status_code {
|
|
VIRTCHNL_STATUS_SUCCESS = 0,
|
|
VIRTCHNL_STATUS_ERR_PARAM = -5,
|
|
VIRTCHNL_STATUS_ERR_NO_MEMORY = -18,
|
|
VIRTCHNL_STATUS_ERR_OPCODE_MISMATCH = -38,
|
|
VIRTCHNL_STATUS_ERR_CQP_COMPL_ERROR = -39,
|
|
VIRTCHNL_STATUS_ERR_INVALID_VF_ID = -40,
|
|
VIRTCHNL_STATUS_ERR_ADMIN_QUEUE_ERROR = -53,
|
|
VIRTCHNL_STATUS_ERR_NOT_SUPPORTED = -64,
|
|
};
|
|
|
|
/* Backward compatibility */
|
|
#define VIRTCHNL_ERR_PARAM VIRTCHNL_STATUS_ERR_PARAM
|
|
#define VIRTCHNL_STATUS_NOT_SUPPORTED VIRTCHNL_STATUS_ERR_NOT_SUPPORTED
|
|
|
|
#define VIRTCHNL_LINK_SPEED_2_5GB_SHIFT 0x0
|
|
#define VIRTCHNL_LINK_SPEED_100MB_SHIFT 0x1
|
|
#define VIRTCHNL_LINK_SPEED_1000MB_SHIFT 0x2
|
|
#define VIRTCHNL_LINK_SPEED_10GB_SHIFT 0x3
|
|
#define VIRTCHNL_LINK_SPEED_40GB_SHIFT 0x4
|
|
#define VIRTCHNL_LINK_SPEED_20GB_SHIFT 0x5
|
|
#define VIRTCHNL_LINK_SPEED_25GB_SHIFT 0x6
|
|
#define VIRTCHNL_LINK_SPEED_5GB_SHIFT 0x7
|
|
|
|
enum virtchnl_link_speed {
|
|
VIRTCHNL_LINK_SPEED_UNKNOWN = 0,
|
|
VIRTCHNL_LINK_SPEED_100MB = BIT(VIRTCHNL_LINK_SPEED_100MB_SHIFT),
|
|
VIRTCHNL_LINK_SPEED_1GB = BIT(VIRTCHNL_LINK_SPEED_1000MB_SHIFT),
|
|
VIRTCHNL_LINK_SPEED_10GB = BIT(VIRTCHNL_LINK_SPEED_10GB_SHIFT),
|
|
VIRTCHNL_LINK_SPEED_40GB = BIT(VIRTCHNL_LINK_SPEED_40GB_SHIFT),
|
|
VIRTCHNL_LINK_SPEED_20GB = BIT(VIRTCHNL_LINK_SPEED_20GB_SHIFT),
|
|
VIRTCHNL_LINK_SPEED_25GB = BIT(VIRTCHNL_LINK_SPEED_25GB_SHIFT),
|
|
VIRTCHNL_LINK_SPEED_2_5GB = BIT(VIRTCHNL_LINK_SPEED_2_5GB_SHIFT),
|
|
VIRTCHNL_LINK_SPEED_5GB = BIT(VIRTCHNL_LINK_SPEED_5GB_SHIFT),
|
|
};
|
|
|
|
/* for hsplit_0 field of Rx HMC context */
|
|
/* deprecated with IAVF 1.0 */
|
|
enum virtchnl_rx_hsplit {
|
|
VIRTCHNL_RX_HSPLIT_NO_SPLIT = 0,
|
|
VIRTCHNL_RX_HSPLIT_SPLIT_L2 = 1,
|
|
VIRTCHNL_RX_HSPLIT_SPLIT_IP = 2,
|
|
VIRTCHNL_RX_HSPLIT_SPLIT_TCP_UDP = 4,
|
|
VIRTCHNL_RX_HSPLIT_SPLIT_SCTP = 8,
|
|
};
|
|
|
|
#define VIRTCHNL_ETH_LENGTH_OF_ADDRESS 6
|
|
/* END GENERIC DEFINES */
|
|
|
|
/* Opcodes for VF-PF communication. These are placed in the v_opcode field
|
|
* of the virtchnl_msg structure.
|
|
*/
|
|
enum virtchnl_ops {
|
|
/* The PF sends status change events to VFs using
|
|
* the VIRTCHNL_OP_EVENT opcode.
|
|
* VFs send requests to the PF using the other ops.
|
|
* Use of "advanced opcode" features must be negotiated as part of capabilities
|
|
* exchange and are not considered part of base mode feature set.
|
|
*/
|
|
VIRTCHNL_OP_UNKNOWN = 0,
|
|
VIRTCHNL_OP_VERSION = 1, /* must ALWAYS be 1 */
|
|
VIRTCHNL_OP_RESET_VF = 2,
|
|
VIRTCHNL_OP_GET_VF_RESOURCES = 3,
|
|
VIRTCHNL_OP_CONFIG_TX_QUEUE = 4,
|
|
VIRTCHNL_OP_CONFIG_RX_QUEUE = 5,
|
|
VIRTCHNL_OP_CONFIG_VSI_QUEUES = 6,
|
|
VIRTCHNL_OP_CONFIG_IRQ_MAP = 7,
|
|
VIRTCHNL_OP_ENABLE_QUEUES = 8,
|
|
VIRTCHNL_OP_DISABLE_QUEUES = 9,
|
|
VIRTCHNL_OP_ADD_ETH_ADDR = 10,
|
|
VIRTCHNL_OP_DEL_ETH_ADDR = 11,
|
|
VIRTCHNL_OP_ADD_VLAN = 12,
|
|
VIRTCHNL_OP_DEL_VLAN = 13,
|
|
VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE = 14,
|
|
VIRTCHNL_OP_GET_STATS = 15,
|
|
VIRTCHNL_OP_RSVD = 16,
|
|
VIRTCHNL_OP_EVENT = 17, /* must ALWAYS be 17 */
|
|
/* opcode 19 is reserved */
|
|
/* opcodes 20, 21, and 22 are reserved */
|
|
VIRTCHNL_OP_CONFIG_RSS_KEY = 23,
|
|
VIRTCHNL_OP_CONFIG_RSS_LUT = 24,
|
|
VIRTCHNL_OP_GET_RSS_HENA_CAPS = 25,
|
|
VIRTCHNL_OP_SET_RSS_HENA = 26,
|
|
VIRTCHNL_OP_ENABLE_VLAN_STRIPPING = 27,
|
|
VIRTCHNL_OP_DISABLE_VLAN_STRIPPING = 28,
|
|
VIRTCHNL_OP_REQUEST_QUEUES = 29,
|
|
VIRTCHNL_OP_ENABLE_CHANNELS = 30,
|
|
VIRTCHNL_OP_DISABLE_CHANNELS = 31,
|
|
VIRTCHNL_OP_ADD_CLOUD_FILTER = 32,
|
|
VIRTCHNL_OP_DEL_CLOUD_FILTER = 33,
|
|
/* opcodes 34, 35, 36, and 37 are reserved */
|
|
VIRTCHNL_OP_DCF_VLAN_OFFLOAD = 38,
|
|
VIRTCHNL_OP_DCF_CMD_DESC = 39,
|
|
VIRTCHNL_OP_DCF_CMD_BUFF = 40,
|
|
VIRTCHNL_OP_DCF_DISABLE = 41,
|
|
VIRTCHNL_OP_DCF_GET_VSI_MAP = 42,
|
|
VIRTCHNL_OP_DCF_GET_PKG_INFO = 43,
|
|
VIRTCHNL_OP_GET_SUPPORTED_RXDIDS = 44,
|
|
VIRTCHNL_OP_ADD_RSS_CFG = 45,
|
|
VIRTCHNL_OP_DEL_RSS_CFG = 46,
|
|
VIRTCHNL_OP_ADD_FDIR_FILTER = 47,
|
|
VIRTCHNL_OP_DEL_FDIR_FILTER = 48,
|
|
VIRTCHNL_OP_QUERY_FDIR_FILTER = 49,
|
|
VIRTCHNL_OP_GET_MAX_RSS_QREGION = 50,
|
|
VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS = 51,
|
|
VIRTCHNL_OP_ADD_VLAN_V2 = 52,
|
|
VIRTCHNL_OP_DEL_VLAN_V2 = 53,
|
|
VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 = 54,
|
|
VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2 = 55,
|
|
VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2 = 56,
|
|
VIRTCHNL_OP_DISABLE_VLAN_INSERTION_V2 = 57,
|
|
VIRTCHNL_OP_ENABLE_VLAN_FILTERING_V2 = 58,
|
|
VIRTCHNL_OP_DISABLE_VLAN_FILTERING_V2 = 59,
|
|
VIRTCHNL_OP_ENABLE_QUEUES_V2 = 107,
|
|
VIRTCHNL_OP_DISABLE_QUEUES_V2 = 108,
|
|
VIRTCHNL_OP_MAP_QUEUE_VECTOR = 111,
|
|
VIRTCHNL_OP_MAX,
|
|
};
|
|
|
|
static inline const char *virtchnl_op_str(enum virtchnl_ops v_opcode)
|
|
{
|
|
switch (v_opcode) {
|
|
case VIRTCHNL_OP_UNKNOWN:
|
|
return "VIRTCHNL_OP_UNKNOWN";
|
|
case VIRTCHNL_OP_VERSION:
|
|
return "VIRTCHNL_OP_VERSION";
|
|
case VIRTCHNL_OP_RESET_VF:
|
|
return "VIRTCHNL_OP_RESET_VF";
|
|
case VIRTCHNL_OP_GET_VF_RESOURCES:
|
|
return "VIRTCHNL_OP_GET_VF_RESOURCES";
|
|
case VIRTCHNL_OP_CONFIG_TX_QUEUE:
|
|
return "VIRTCHNL_OP_CONFIG_TX_QUEUE";
|
|
case VIRTCHNL_OP_CONFIG_RX_QUEUE:
|
|
return "VIRTCHNL_OP_CONFIG_RX_QUEUE";
|
|
case VIRTCHNL_OP_CONFIG_VSI_QUEUES:
|
|
return "VIRTCHNL_OP_CONFIG_VSI_QUEUES";
|
|
case VIRTCHNL_OP_CONFIG_IRQ_MAP:
|
|
return "VIRTCHNL_OP_CONFIG_IRQ_MAP";
|
|
case VIRTCHNL_OP_ENABLE_QUEUES:
|
|
return "VIRTCHNL_OP_ENABLE_QUEUES";
|
|
case VIRTCHNL_OP_DISABLE_QUEUES:
|
|
return "VIRTCHNL_OP_DISABLE_QUEUES";
|
|
case VIRTCHNL_OP_ADD_ETH_ADDR:
|
|
return "VIRTCHNL_OP_ADD_ETH_ADDR";
|
|
case VIRTCHNL_OP_DEL_ETH_ADDR:
|
|
return "VIRTCHNL_OP_DEL_ETH_ADDR";
|
|
case VIRTCHNL_OP_ADD_VLAN:
|
|
return "VIRTCHNL_OP_ADD_VLAN";
|
|
case VIRTCHNL_OP_DEL_VLAN:
|
|
return "VIRTCHNL_OP_DEL_VLAN";
|
|
case VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE:
|
|
return "VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE";
|
|
case VIRTCHNL_OP_GET_STATS:
|
|
return "VIRTCHNL_OP_GET_STATS";
|
|
case VIRTCHNL_OP_RSVD:
|
|
return "VIRTCHNL_OP_RSVD";
|
|
case VIRTCHNL_OP_EVENT:
|
|
return "VIRTCHNL_OP_EVENT";
|
|
case VIRTCHNL_OP_CONFIG_RSS_KEY:
|
|
return "VIRTCHNL_OP_CONFIG_RSS_KEY";
|
|
case VIRTCHNL_OP_CONFIG_RSS_LUT:
|
|
return "VIRTCHNL_OP_CONFIG_RSS_LUT";
|
|
case VIRTCHNL_OP_GET_RSS_HENA_CAPS:
|
|
return "VIRTCHNL_OP_GET_RSS_HENA_CAPS";
|
|
case VIRTCHNL_OP_SET_RSS_HENA:
|
|
return "VIRTCHNL_OP_SET_RSS_HENA";
|
|
case VIRTCHNL_OP_ENABLE_VLAN_STRIPPING:
|
|
return "VIRTCHNL_OP_ENABLE_VLAN_STRIPPING";
|
|
case VIRTCHNL_OP_DISABLE_VLAN_STRIPPING:
|
|
return "VIRTCHNL_OP_DISABLE_VLAN_STRIPPING";
|
|
case VIRTCHNL_OP_REQUEST_QUEUES:
|
|
return "VIRTCHNL_OP_REQUEST_QUEUES";
|
|
case VIRTCHNL_OP_ENABLE_CHANNELS:
|
|
return "VIRTCHNL_OP_ENABLE_CHANNELS";
|
|
case VIRTCHNL_OP_DISABLE_CHANNELS:
|
|
return "VIRTCHNL_OP_DISABLE_CHANNELS";
|
|
case VIRTCHNL_OP_ADD_CLOUD_FILTER:
|
|
return "VIRTCHNL_OP_ADD_CLOUD_FILTER";
|
|
case VIRTCHNL_OP_DEL_CLOUD_FILTER:
|
|
return "VIRTCHNL_OP_DEL_CLOUD_FILTER";
|
|
case VIRTCHNL_OP_DCF_CMD_DESC:
|
|
return "VIRTCHNL_OP_DCF_CMD_DESC";
|
|
case VIRTCHNL_OP_DCF_CMD_BUFF:
|
|
return "VIRTCHHNL_OP_DCF_CMD_BUFF";
|
|
case VIRTCHNL_OP_DCF_DISABLE:
|
|
return "VIRTCHNL_OP_DCF_DISABLE";
|
|
case VIRTCHNL_OP_DCF_GET_VSI_MAP:
|
|
return "VIRTCHNL_OP_DCF_GET_VSI_MAP";
|
|
case VIRTCHNL_OP_GET_SUPPORTED_RXDIDS:
|
|
return "VIRTCHNL_OP_GET_SUPPORTED_RXDIDS";
|
|
case VIRTCHNL_OP_ADD_RSS_CFG:
|
|
return "VIRTCHNL_OP_ADD_RSS_CFG";
|
|
case VIRTCHNL_OP_DEL_RSS_CFG:
|
|
return "VIRTCHNL_OP_DEL_RSS_CFG";
|
|
case VIRTCHNL_OP_ADD_FDIR_FILTER:
|
|
return "VIRTCHNL_OP_ADD_FDIR_FILTER";
|
|
case VIRTCHNL_OP_DEL_FDIR_FILTER:
|
|
return "VIRTCHNL_OP_DEL_FDIR_FILTER";
|
|
case VIRTCHNL_OP_QUERY_FDIR_FILTER:
|
|
return "VIRTCHNL_OP_QUERY_FDIR_FILTER";
|
|
case VIRTCHNL_OP_GET_MAX_RSS_QREGION:
|
|
return "VIRTCHNL_OP_GET_MAX_RSS_QREGION";
|
|
case VIRTCHNL_OP_ENABLE_QUEUES_V2:
|
|
return "VIRTCHNL_OP_ENABLE_QUEUES_V2";
|
|
case VIRTCHNL_OP_DISABLE_QUEUES_V2:
|
|
return "VIRTCHNL_OP_DISABLE_QUEUES_V2";
|
|
case VIRTCHNL_OP_MAP_QUEUE_VECTOR:
|
|
return "VIRTCHNL_OP_MAP_QUEUE_VECTOR";
|
|
case VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS:
|
|
return "VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS";
|
|
case VIRTCHNL_OP_ADD_VLAN_V2:
|
|
return "VIRTCHNL_OP_ADD_VLAN_V2";
|
|
case VIRTCHNL_OP_DEL_VLAN_V2:
|
|
return "VIRTCHNL_OP_DEL_VLAN_V2";
|
|
case VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2:
|
|
return "VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2";
|
|
case VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2:
|
|
return "VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2";
|
|
case VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2:
|
|
return "VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2";
|
|
case VIRTCHNL_OP_DISABLE_VLAN_INSERTION_V2:
|
|
return "VIRTCHNL_OP_DISABLE_VLAN_INSERTION_V2";
|
|
case VIRTCHNL_OP_ENABLE_VLAN_FILTERING_V2:
|
|
return "VIRTCHNL_OP_ENABLE_VLAN_FILTERING_V2";
|
|
case VIRTCHNL_OP_DISABLE_VLAN_FILTERING_V2:
|
|
return "VIRTCHNL_OP_DISABLE_VLAN_FILTERING_V2";
|
|
case VIRTCHNL_OP_MAX:
|
|
return "VIRTCHNL_OP_MAX";
|
|
default:
|
|
return "Unsupported (update virtchnl.h)";
|
|
}
|
|
}
|
|
|
|
/* These macros are used to generate compilation errors if a structure/union
|
|
* is not exactly the correct length. It gives a divide by zero error if the
|
|
* structure/union is not of the correct size, otherwise it creates an enum
|
|
* that is never used.
|
|
*/
|
|
#define VIRTCHNL_CHECK_STRUCT_LEN(n, X) enum virtchnl_static_assert_enum_##X \
|
|
{ virtchnl_static_assert_##X = (n)/((sizeof(struct X) == (n)) ? 1 : 0) }
|
|
#define VIRTCHNL_CHECK_UNION_LEN(n, X) enum virtchnl_static_asset_enum_##X \
|
|
{ virtchnl_static_assert_##X = (n)/((sizeof(union X) == (n)) ? 1 : 0) }
|
|
|
|
/* Virtual channel message descriptor. This overlays the admin queue
|
|
* descriptor. All other data is passed in external buffers.
|
|
*/
|
|
|
|
struct virtchnl_msg {
|
|
u8 pad[8]; /* AQ flags/opcode/len/retval fields */
|
|
|
|
/* avoid confusion with desc->opcode */
|
|
enum virtchnl_ops v_opcode;
|
|
|
|
/* ditto for desc->retval */
|
|
enum virtchnl_status_code v_retval;
|
|
u32 vfid; /* used by PF when sending to VF */
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(20, virtchnl_msg);
|
|
|
|
/* Message descriptions and data structures. */
|
|
|
|
/* VIRTCHNL_OP_VERSION
|
|
* VF posts its version number to the PF. PF responds with its version number
|
|
* in the same format, along with a return code.
|
|
* Reply from PF has its major/minor versions also in param0 and param1.
|
|
* If there is a major version mismatch, then the VF cannot operate.
|
|
* If there is a minor version mismatch, then the VF can operate but should
|
|
* add a warning to the system log.
|
|
*
|
|
* This enum element MUST always be specified as == 1, regardless of other
|
|
* changes in the API. The PF must always respond to this message without
|
|
* error regardless of version mismatch.
|
|
*/
|
|
#define VIRTCHNL_VERSION_MAJOR 1
|
|
#define VIRTCHNL_VERSION_MINOR 1
|
|
#define VIRTCHNL_VERSION_MINOR_NO_VF_CAPS 0
|
|
|
|
struct virtchnl_version_info {
|
|
u32 major;
|
|
u32 minor;
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_version_info);
|
|
|
|
#define VF_IS_V10(_v) (((_v)->major == 1) && ((_v)->minor == 0))
|
|
#define VF_IS_V11(_ver) (((_ver)->major == 1) && ((_ver)->minor == 1))
|
|
|
|
/* VIRTCHNL_OP_RESET_VF
|
|
* VF sends this request to PF with no parameters
|
|
* PF does NOT respond! VF driver must delay then poll VFGEN_RSTAT register
|
|
* until reset completion is indicated. The admin queue must be reinitialized
|
|
* after this operation.
|
|
*
|
|
* When reset is complete, PF must ensure that all queues in all VSIs associated
|
|
* with the VF are stopped, all queue configurations in the HMC are set to 0,
|
|
* and all MAC and VLAN filters (except the default MAC address) on all VSIs
|
|
* are cleared.
|
|
*/
|
|
|
|
/* VSI types that use VIRTCHNL interface for VF-PF communication. VSI_SRIOV
|
|
* vsi_type should always be 6 for backward compatibility. Add other fields
|
|
* as needed.
|
|
*/
|
|
enum virtchnl_vsi_type {
|
|
VIRTCHNL_VSI_TYPE_INVALID = 0,
|
|
VIRTCHNL_VSI_SRIOV = 6,
|
|
};
|
|
|
|
/* VIRTCHNL_OP_GET_VF_RESOURCES
|
|
* Version 1.0 VF sends this request to PF with no parameters
|
|
* Version 1.1 VF sends this request to PF with u32 bitmap of its capabilities
|
|
* PF responds with an indirect message containing
|
|
* virtchnl_vf_resource and one or more
|
|
* virtchnl_vsi_resource structures.
|
|
*/
|
|
|
|
struct virtchnl_vsi_resource {
|
|
u16 vsi_id;
|
|
u16 num_queue_pairs;
|
|
|
|
/* see enum virtchnl_vsi_type */
|
|
s32 vsi_type;
|
|
u16 qset_handle;
|
|
u8 default_mac_addr[VIRTCHNL_ETH_LENGTH_OF_ADDRESS];
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_vsi_resource);
|
|
|
|
/* VF capability flags
|
|
* VIRTCHNL_VF_OFFLOAD_L2 flag is inclusive of base mode L2 offloads including
|
|
* TX/RX Checksum offloading and TSO for non-tunnelled packets.
|
|
*/
|
|
#define VIRTCHNL_VF_OFFLOAD_L2 BIT(0)
|
|
#define VIRTCHNL_VF_OFFLOAD_IWARP BIT(1)
|
|
#define VIRTCHNL_VF_OFFLOAD_RSVD BIT(2)
|
|
#define VIRTCHNL_VF_OFFLOAD_RSS_AQ BIT(3)
|
|
#define VIRTCHNL_VF_OFFLOAD_RSS_REG BIT(4)
|
|
#define VIRTCHNL_VF_OFFLOAD_WB_ON_ITR BIT(5)
|
|
#define VIRTCHNL_VF_OFFLOAD_REQ_QUEUES BIT(6)
|
|
/* used to negotiate communicating link speeds in Mbps */
|
|
#define VIRTCHNL_VF_CAP_ADV_LINK_SPEED BIT(7)
|
|
/* BIT(8) is reserved */
|
|
#define VIRTCHNL_VF_LARGE_NUM_QPAIRS BIT(9)
|
|
#define VIRTCHNL_VF_OFFLOAD_CRC BIT(10)
|
|
#define VIRTCHNL_VF_OFFLOAD_VLAN_V2 BIT(15)
|
|
#define VIRTCHNL_VF_OFFLOAD_VLAN BIT(16)
|
|
#define VIRTCHNL_VF_OFFLOAD_RX_POLLING BIT(17)
|
|
#define VIRTCHNL_VF_OFFLOAD_RSS_PCTYPE_V2 BIT(18)
|
|
#define VIRTCHNL_VF_OFFLOAD_RSS_PF BIT(19)
|
|
#define VIRTCHNL_VF_OFFLOAD_ENCAP BIT(20)
|
|
#define VIRTCHNL_VF_OFFLOAD_ENCAP_CSUM BIT(21)
|
|
#define VIRTCHNL_VF_OFFLOAD_RX_ENCAP_CSUM BIT(22)
|
|
#define VIRTCHNL_VF_OFFLOAD_ADQ BIT(23)
|
|
#define VIRTCHNL_VF_OFFLOAD_ADQ_V2 BIT(24)
|
|
#define VIRTCHNL_VF_OFFLOAD_USO BIT(25)
|
|
#define VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC BIT(26)
|
|
#define VIRTCHNL_VF_OFFLOAD_ADV_RSS_PF BIT(27)
|
|
#define VIRTCHNL_VF_OFFLOAD_FDIR_PF BIT(28)
|
|
#define VIRTCHNL_VF_CAP_DCF BIT(30)
|
|
/* BIT(31) is reserved */
|
|
|
|
#define VF_BASE_MODE_OFFLOADS (VIRTCHNL_VF_OFFLOAD_L2 | \
|
|
VIRTCHNL_VF_OFFLOAD_VLAN | \
|
|
VIRTCHNL_VF_OFFLOAD_RSS_PF)
|
|
|
|
struct virtchnl_vf_resource {
|
|
u16 num_vsis;
|
|
u16 num_queue_pairs;
|
|
u16 max_vectors;
|
|
u16 max_mtu;
|
|
|
|
u32 vf_cap_flags;
|
|
u32 rss_key_size;
|
|
u32 rss_lut_size;
|
|
|
|
struct virtchnl_vsi_resource vsi_res[1];
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(36, virtchnl_vf_resource);
|
|
|
|
/* VIRTCHNL_OP_CONFIG_TX_QUEUE
|
|
* VF sends this message to set up parameters for one TX queue.
|
|
* External data buffer contains one instance of virtchnl_txq_info.
|
|
* PF configures requested queue and returns a status code.
|
|
*/
|
|
|
|
/* Tx queue config info */
|
|
struct virtchnl_txq_info {
|
|
u16 vsi_id;
|
|
u16 queue_id;
|
|
u16 ring_len; /* number of descriptors, multiple of 8 */
|
|
u16 headwb_enabled; /* deprecated with AVF 1.0 */
|
|
u64 dma_ring_addr;
|
|
u64 dma_headwb_addr; /* deprecated with AVF 1.0 */
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(24, virtchnl_txq_info);
|
|
|
|
/* RX descriptor IDs (range from 0 to 63) */
|
|
enum virtchnl_rx_desc_ids {
|
|
VIRTCHNL_RXDID_0_16B_BASE = 0,
|
|
/* 32B_BASE and FLEX_SPLITQ share desc ids as default descriptors
|
|
* because they can be differentiated based on queue model; e.g. single
|
|
* queue model can only use 32B_BASE and split queue model can only use
|
|
* FLEX_SPLITQ. Having these as 1 allows them to be used as default
|
|
* descriptors without negotiation.
|
|
*/
|
|
VIRTCHNL_RXDID_1_32B_BASE = 1,
|
|
VIRTCHNL_RXDID_1_FLEX_SPLITQ = 1,
|
|
VIRTCHNL_RXDID_2_FLEX_SQ_NIC = 2,
|
|
VIRTCHNL_RXDID_3_FLEX_SQ_SW = 3,
|
|
VIRTCHNL_RXDID_4_FLEX_SQ_NIC_VEB = 4,
|
|
VIRTCHNL_RXDID_5_FLEX_SQ_NIC_ACL = 5,
|
|
VIRTCHNL_RXDID_6_FLEX_SQ_NIC_2 = 6,
|
|
VIRTCHNL_RXDID_7_HW_RSVD = 7,
|
|
/* 9 through 15 are reserved */
|
|
VIRTCHNL_RXDID_16_COMMS_GENERIC = 16,
|
|
VIRTCHNL_RXDID_17_COMMS_AUX_VLAN = 17,
|
|
VIRTCHNL_RXDID_18_COMMS_AUX_IPV4 = 18,
|
|
VIRTCHNL_RXDID_19_COMMS_AUX_IPV6 = 19,
|
|
VIRTCHNL_RXDID_20_COMMS_AUX_FLOW = 20,
|
|
VIRTCHNL_RXDID_21_COMMS_AUX_TCP = 21,
|
|
/* 22 through 63 are reserved */
|
|
};
|
|
|
|
/* RX descriptor ID bitmasks */
|
|
enum virtchnl_rx_desc_id_bitmasks {
|
|
VIRTCHNL_RXDID_0_16B_BASE_M = BIT(VIRTCHNL_RXDID_0_16B_BASE),
|
|
VIRTCHNL_RXDID_1_32B_BASE_M = BIT(VIRTCHNL_RXDID_1_32B_BASE),
|
|
VIRTCHNL_RXDID_1_FLEX_SPLITQ_M = BIT(VIRTCHNL_RXDID_1_FLEX_SPLITQ),
|
|
VIRTCHNL_RXDID_2_FLEX_SQ_NIC_M = BIT(VIRTCHNL_RXDID_2_FLEX_SQ_NIC),
|
|
VIRTCHNL_RXDID_3_FLEX_SQ_SW_M = BIT(VIRTCHNL_RXDID_3_FLEX_SQ_SW),
|
|
VIRTCHNL_RXDID_4_FLEX_SQ_NIC_VEB_M = BIT(VIRTCHNL_RXDID_4_FLEX_SQ_NIC_VEB),
|
|
VIRTCHNL_RXDID_5_FLEX_SQ_NIC_ACL_M = BIT(VIRTCHNL_RXDID_5_FLEX_SQ_NIC_ACL),
|
|
VIRTCHNL_RXDID_6_FLEX_SQ_NIC_2_M = BIT(VIRTCHNL_RXDID_6_FLEX_SQ_NIC_2),
|
|
VIRTCHNL_RXDID_7_HW_RSVD_M = BIT(VIRTCHNL_RXDID_7_HW_RSVD),
|
|
/* 9 through 15 are reserved */
|
|
VIRTCHNL_RXDID_16_COMMS_GENERIC_M = BIT(VIRTCHNL_RXDID_16_COMMS_GENERIC),
|
|
VIRTCHNL_RXDID_17_COMMS_AUX_VLAN_M = BIT(VIRTCHNL_RXDID_17_COMMS_AUX_VLAN),
|
|
VIRTCHNL_RXDID_18_COMMS_AUX_IPV4_M = BIT(VIRTCHNL_RXDID_18_COMMS_AUX_IPV4),
|
|
VIRTCHNL_RXDID_19_COMMS_AUX_IPV6_M = BIT(VIRTCHNL_RXDID_19_COMMS_AUX_IPV6),
|
|
VIRTCHNL_RXDID_20_COMMS_AUX_FLOW_M = BIT(VIRTCHNL_RXDID_20_COMMS_AUX_FLOW),
|
|
VIRTCHNL_RXDID_21_COMMS_AUX_TCP_M = BIT(VIRTCHNL_RXDID_21_COMMS_AUX_TCP),
|
|
/* 22 through 63 are reserved */
|
|
};
|
|
|
|
/* VIRTCHNL_OP_CONFIG_RX_QUEUE
|
|
* VF sends this message to set up parameters for one RX queue.
|
|
* External data buffer contains one instance of virtchnl_rxq_info.
|
|
* PF configures requested queue and returns a status code. The
|
|
* crc_disable flag disables CRC stripping on the VF. Setting
|
|
* the crc_disable flag to 1 will disable CRC stripping for each
|
|
* queue in the VF where the flag is set. The VIRTCHNL_VF_OFFLOAD_CRC
|
|
* offload must have been set prior to sending this info or the PF
|
|
* will ignore the request. This flag should be set the same for
|
|
* all of the queues for a VF.
|
|
*/
|
|
|
|
/* Rx queue config info */
|
|
struct virtchnl_rxq_info {
|
|
u16 vsi_id;
|
|
u16 queue_id;
|
|
u32 ring_len; /* number of descriptors, multiple of 32 */
|
|
u16 hdr_size;
|
|
u16 splithdr_enabled; /* deprecated with AVF 1.0 */
|
|
u32 databuffer_size;
|
|
u32 max_pkt_size;
|
|
u8 crc_disable;
|
|
/* see enum virtchnl_rx_desc_ids;
|
|
* only used when VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC is supported. Note
|
|
* that when the offload is not supported, the descriptor format aligns
|
|
* with VIRTCHNL_RXDID_1_32B_BASE.
|
|
*/
|
|
u8 rxdid;
|
|
u8 pad1[2];
|
|
u64 dma_ring_addr;
|
|
|
|
/* see enum virtchnl_rx_hsplit; deprecated with AVF 1.0 */
|
|
s32 rx_split_pos;
|
|
u32 pad2;
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(40, virtchnl_rxq_info);
|
|
|
|
/* VIRTCHNL_OP_CONFIG_VSI_QUEUES
|
|
* VF sends this message to set parameters for active TX and RX queues
|
|
* associated with the specified VSI.
|
|
* PF configures queues and returns status.
|
|
* If the number of queues specified is greater than the number of queues
|
|
* associated with the VSI, an error is returned and no queues are configured.
|
|
* NOTE: The VF is not required to configure all queues in a single request.
|
|
* It may send multiple messages. PF drivers must correctly handle all VF
|
|
* requests.
|
|
*/
|
|
struct virtchnl_queue_pair_info {
|
|
/* NOTE: vsi_id and queue_id should be identical for both queues. */
|
|
struct virtchnl_txq_info txq;
|
|
struct virtchnl_rxq_info rxq;
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(64, virtchnl_queue_pair_info);
|
|
|
|
struct virtchnl_vsi_queue_config_info {
|
|
u16 vsi_id;
|
|
u16 num_queue_pairs;
|
|
u32 pad;
|
|
struct virtchnl_queue_pair_info qpair[1];
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(72, virtchnl_vsi_queue_config_info);
|
|
|
|
/* VIRTCHNL_OP_REQUEST_QUEUES
|
|
* VF sends this message to request the PF to allocate additional queues to
|
|
* this VF. Each VF gets a guaranteed number of queues on init but asking for
|
|
* additional queues must be negotiated. This is a best effort request as it
|
|
* is possible the PF does not have enough queues left to support the request.
|
|
* If the PF cannot support the number requested it will respond with the
|
|
* maximum number it is able to support. If the request is successful, PF will
|
|
* then reset the VF to institute required changes.
|
|
*/
|
|
|
|
/* VF resource request */
|
|
struct virtchnl_vf_res_request {
|
|
u16 num_queue_pairs;
|
|
};
|
|
|
|
/* VIRTCHNL_OP_CONFIG_IRQ_MAP
|
|
* VF uses this message to map vectors to queues.
|
|
* The rxq_map and txq_map fields are bitmaps used to indicate which queues
|
|
* are to be associated with the specified vector.
|
|
* The "other" causes are always mapped to vector 0. The VF may not request
|
|
* that vector 0 be used for traffic.
|
|
* PF configures interrupt mapping and returns status.
|
|
* NOTE: due to hardware requirements, all active queues (both TX and RX)
|
|
* should be mapped to interrupts, even if the driver intends to operate
|
|
* only in polling mode. In this case the interrupt may be disabled, but
|
|
* the ITR timer will still run to trigger writebacks.
|
|
*/
|
|
struct virtchnl_vector_map {
|
|
u16 vsi_id;
|
|
u16 vector_id;
|
|
u16 rxq_map;
|
|
u16 txq_map;
|
|
u16 rxitr_idx;
|
|
u16 txitr_idx;
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_vector_map);
|
|
|
|
struct virtchnl_irq_map_info {
|
|
u16 num_vectors;
|
|
struct virtchnl_vector_map vecmap[1];
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(14, virtchnl_irq_map_info);
|
|
|
|
/* VIRTCHNL_OP_ENABLE_QUEUES
|
|
* VIRTCHNL_OP_DISABLE_QUEUES
|
|
* VF sends these message to enable or disable TX/RX queue pairs.
|
|
* The queues fields are bitmaps indicating which queues to act upon.
|
|
* (Currently, we only support 16 queues per VF, but we make the field
|
|
* u32 to allow for expansion.)
|
|
* PF performs requested action and returns status.
|
|
* NOTE: The VF is not required to enable/disable all queues in a single
|
|
* request. It may send multiple messages.
|
|
* PF drivers must correctly handle all VF requests.
|
|
*/
|
|
struct virtchnl_queue_select {
|
|
u16 vsi_id;
|
|
u16 pad;
|
|
u32 rx_queues;
|
|
u32 tx_queues;
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_queue_select);
|
|
|
|
/* VIRTCHNL_OP_GET_MAX_RSS_QREGION
|
|
*
|
|
* if VIRTCHNL_VF_LARGE_NUM_QPAIRS was negotiated in VIRTCHNL_OP_GET_VF_RESOURCES
|
|
* then this op must be supported.
|
|
*
|
|
* VF sends this message in order to query the max RSS queue region
|
|
* size supported by PF, when VIRTCHNL_VF_LARGE_NUM_QPAIRS is enabled.
|
|
* This information should be used when configuring the RSS LUT and/or
|
|
* configuring queue region based filters.
|
|
*
|
|
* The maximum RSS queue region is 2^qregion_width. So, a qregion_width
|
|
* of 6 would inform the VF that the PF supports a maximum RSS queue region
|
|
* of 64.
|
|
*
|
|
* A queue region represents a range of queues that can be used to configure
|
|
* a RSS LUT. For example, if a VF is given 64 queues, but only a max queue
|
|
* region size of 16 (i.e. 2^qregion_width = 16) then it will only be able
|
|
* to configure the RSS LUT with queue indices from 0 to 15. However, other
|
|
* filters can be used to direct packets to queues >15 via specifying a queue
|
|
* base/offset and queue region width.
|
|
*/
|
|
struct virtchnl_max_rss_qregion {
|
|
u16 vport_id;
|
|
u16 qregion_width;
|
|
u8 pad[4];
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_max_rss_qregion);
|
|
|
|
/* VIRTCHNL_OP_ADD_ETH_ADDR
|
|
* VF sends this message in order to add one or more unicast or multicast
|
|
* address filters for the specified VSI.
|
|
* PF adds the filters and returns status.
|
|
*/
|
|
|
|
/* VIRTCHNL_OP_DEL_ETH_ADDR
|
|
* VF sends this message in order to remove one or more unicast or multicast
|
|
* filters for the specified VSI.
|
|
* PF removes the filters and returns status.
|
|
*/
|
|
|
|
/* VIRTCHNL_ETHER_ADDR_LEGACY
|
|
* Prior to adding the @type member to virtchnl_ether_addr, there were 2 pad
|
|
* bytes. Moving forward all VF drivers should not set type to
|
|
* VIRTCHNL_ETHER_ADDR_LEGACY. This is only here to not break previous/legacy
|
|
* behavior. The control plane function (i.e. PF) can use a best effort method
|
|
* of tracking the primary/device unicast in this case, but there is no
|
|
* guarantee and functionality depends on the implementation of the PF.
|
|
*/
|
|
|
|
/* VIRTCHNL_ETHER_ADDR_PRIMARY
|
|
* All VF drivers should set @type to VIRTCHNL_ETHER_ADDR_PRIMARY for the
|
|
* primary/device unicast MAC address filter for VIRTCHNL_OP_ADD_ETH_ADDR and
|
|
* VIRTCHNL_OP_DEL_ETH_ADDR. This allows for the underlying control plane
|
|
* function (i.e. PF) to accurately track and use this MAC address for
|
|
* displaying on the host and for VM/function reset.
|
|
*/
|
|
|
|
/* VIRTCHNL_ETHER_ADDR_EXTRA
|
|
* All VF drivers should set @type to VIRTCHNL_ETHER_ADDR_EXTRA for any extra
|
|
* unicast and/or multicast filters that are being added/deleted via
|
|
* VIRTCHNL_OP_DEL_ETH_ADDR/VIRTCHNL_OP_ADD_ETH_ADDR respectively.
|
|
*/
|
|
struct virtchnl_ether_addr {
|
|
u8 addr[VIRTCHNL_ETH_LENGTH_OF_ADDRESS];
|
|
u8 type;
|
|
#define VIRTCHNL_ETHER_ADDR_LEGACY 0
|
|
#define VIRTCHNL_ETHER_ADDR_PRIMARY 1
|
|
#define VIRTCHNL_ETHER_ADDR_EXTRA 2
|
|
#define VIRTCHNL_ETHER_ADDR_TYPE_MASK 3 /* first two bits of type are valid */
|
|
u8 pad;
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_ether_addr);
|
|
|
|
struct virtchnl_ether_addr_list {
|
|
u16 vsi_id;
|
|
u16 num_elements;
|
|
struct virtchnl_ether_addr list[1];
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_ether_addr_list);
|
|
|
|
/* VIRTCHNL_OP_ADD_VLAN
|
|
* VF sends this message to add one or more VLAN tag filters for receives.
|
|
* PF adds the filters and returns status.
|
|
* If a port VLAN is configured by the PF, this operation will return an
|
|
* error to the VF.
|
|
*/
|
|
|
|
/* VIRTCHNL_OP_DEL_VLAN
|
|
* VF sends this message to remove one or more VLAN tag filters for receives.
|
|
* PF removes the filters and returns status.
|
|
* If a port VLAN is configured by the PF, this operation will return an
|
|
* error to the VF.
|
|
*/
|
|
|
|
struct virtchnl_vlan_filter_list {
|
|
u16 vsi_id;
|
|
u16 num_elements;
|
|
u16 vlan_id[1];
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(6, virtchnl_vlan_filter_list);
|
|
|
|
/* This enum is used for all of the VIRTCHNL_VF_OFFLOAD_VLAN_V2_CAPS related
|
|
* structures and opcodes.
|
|
*
|
|
* VIRTCHNL_VLAN_UNSUPPORTED - This field is not supported and if a VF driver
|
|
* populates it the PF should return VIRTCHNL_STATUS_ERR_NOT_SUPPORTED.
|
|
*
|
|
* VIRTCHNL_VLAN_ETHERTYPE_8100 - This field supports 0x8100 ethertype.
|
|
* VIRTCHNL_VLAN_ETHERTYPE_88A8 - This field supports 0x88A8 ethertype.
|
|
* VIRTCHNL_VLAN_ETHERTYPE_9100 - This field supports 0x9100 ethertype.
|
|
*
|
|
* VIRTCHNL_VLAN_ETHERTYPE_AND - Used when multiple ethertypes can be supported
|
|
* by the PF concurrently. For example, if the PF can support
|
|
* VIRTCHNL_VLAN_ETHERTYPE_8100 AND VIRTCHNL_VLAN_ETHERTYPE_88A8 filters it
|
|
* would OR the following bits:
|
|
*
|
|
* VIRTHCNL_VLAN_ETHERTYPE_8100 |
|
|
* VIRTCHNL_VLAN_ETHERTYPE_88A8 |
|
|
* VIRTCHNL_VLAN_ETHERTYPE_AND;
|
|
*
|
|
* The VF would interpret this as VLAN filtering can be supported on both 0x8100
|
|
* and 0x88A8 VLAN ethertypes.
|
|
*
|
|
* VIRTCHNL_ETHERTYPE_XOR - Used when only a single ethertype can be supported
|
|
* by the PF concurrently. For example if the PF can support
|
|
* VIRTCHNL_VLAN_ETHERTYPE_8100 XOR VIRTCHNL_VLAN_ETHERTYPE_88A8 stripping
|
|
* offload it would OR the following bits:
|
|
*
|
|
* VIRTCHNL_VLAN_ETHERTYPE_8100 |
|
|
* VIRTCHNL_VLAN_ETHERTYPE_88A8 |
|
|
* VIRTCHNL_VLAN_ETHERTYPE_XOR;
|
|
*
|
|
* The VF would interpret this as VLAN stripping can be supported on either
|
|
* 0x8100 or 0x88a8 VLAN ethertypes. So when requesting VLAN stripping via
|
|
* VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 the specified ethertype will override
|
|
* the previously set value.
|
|
*
|
|
* VIRTCHNL_VLAN_TAG_LOCATION_L2TAG1 - Used to tell the VF to insert and/or
|
|
* strip the VLAN tag using the L2TAG1 field of the Tx/Rx descriptors.
|
|
*
|
|
* VIRTCHNL_VLAN_TAG_LOCATION_L2TAG2 - Used to tell the VF to insert hardware
|
|
* offloaded VLAN tags using the L2TAG2 field of the Tx descriptor.
|
|
*
|
|
* VIRTCHNL_VLAN_TAG_LOCATION_L2TAG2 - Used to tell the VF to strip hardware
|
|
* offloaded VLAN tags using the L2TAG2_2 field of the Rx descriptor.
|
|
*
|
|
* VIRTCHNL_VLAN_PRIO - This field supports VLAN priority bits. This is used for
|
|
* VLAN filtering if the underlying PF supports it.
|
|
*
|
|
* VIRTCHNL_VLAN_TOGGLE_ALLOWED - This field is used to say whether a
|
|
* certain VLAN capability can be toggled. For example if the underlying PF/CP
|
|
* allows the VF to toggle VLAN filtering, stripping, and/or insertion it should
|
|
* set this bit along with the supported ethertypes.
|
|
*/
|
|
enum virtchnl_vlan_support {
|
|
VIRTCHNL_VLAN_UNSUPPORTED = 0,
|
|
VIRTCHNL_VLAN_ETHERTYPE_8100 = 0x00000001,
|
|
VIRTCHNL_VLAN_ETHERTYPE_88A8 = 0x00000002,
|
|
VIRTCHNL_VLAN_ETHERTYPE_9100 = 0x00000004,
|
|
VIRTCHNL_VLAN_TAG_LOCATION_L2TAG1 = 0x00000100,
|
|
VIRTCHNL_VLAN_TAG_LOCATION_L2TAG2 = 0x00000200,
|
|
VIRTCHNL_VLAN_TAG_LOCATION_L2TAG2_2 = 0x00000400,
|
|
VIRTCHNL_VLAN_PRIO = 0x01000000,
|
|
VIRTCHNL_VLAN_FILTER_MASK = 0x10000000,
|
|
VIRTCHNL_VLAN_ETHERTYPE_AND = 0x20000000,
|
|
VIRTCHNL_VLAN_ETHERTYPE_XOR = 0x40000000,
|
|
VIRTCHNL_VLAN_TOGGLE = 0x80000000
|
|
};
|
|
|
|
/* This structure is used as part of the VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS
|
|
* for filtering, insertion, and stripping capabilities.
|
|
*
|
|
* If only outer capabilities are supported (for filtering, insertion, and/or
|
|
* stripping) then this refers to the outer most or single VLAN from the VF's
|
|
* perspective.
|
|
*
|
|
* If only inner capabilities are supported (for filtering, insertion, and/or
|
|
* stripping) then this refers to the outer most or single VLAN from the VF's
|
|
* perspective. Functionally this is the same as if only outer capabilities are
|
|
* supported. The VF driver is just forced to use the inner fields when
|
|
* adding/deleting filters and enabling/disabling offloads (if supported).
|
|
*
|
|
* If both outer and inner capabilities are supported (for filtering, insertion,
|
|
* and/or stripping) then outer refers to the outer most or single VLAN and
|
|
* inner refers to the second VLAN, if it exists, in the packet.
|
|
*
|
|
* There is no support for tunneled VLAN offloads, so outer or inner are never
|
|
* referring to a tunneled packet from the VF's perspective.
|
|
*/
|
|
struct virtchnl_vlan_supported_caps {
|
|
u32 outer;
|
|
u32 inner;
|
|
};
|
|
|
|
/* The PF populates these fields based on the supported VLAN filtering. If a
|
|
* field is VIRTCHNL_VLAN_UNSUPPORTED then it's not supported and the PF will
|
|
* reject any VIRTCHNL_OP_ADD_VLAN_V2 or VIRTCHNL_OP_DEL_VLAN_V2 messages using
|
|
* the unsupported fields.
|
|
*
|
|
* Also, a VF is only allowed to toggle its VLAN filtering setting if the
|
|
* VIRTCHNL_VLAN_TOGGLE bit is set.
|
|
*
|
|
* The ethertype(s) specified in the ethertype_init field are the ethertypes
|
|
* enabled for VLAN filtering. VLAN filtering in this case refers to the outer
|
|
* most VLAN from the VF's perspective. If both inner and outer filtering are
|
|
* allowed then ethertype_init only refers to the outer most VLAN as only
|
|
* VLAN ethertype supported for inner VLAN filtering is
|
|
* VIRTCHNL_VLAN_ETHERTYPE_8100. By default, inner VLAN filtering is disabled
|
|
* when both inner and outer filtering are allowed.
|
|
*
|
|
* The max_filters field tells the VF how many VLAN filters it's allowed to have
|
|
* at any one time. If it exceeds this amount and tries to add another filter,
|
|
* then the request will be rejected by the PF. To prevent failures, the VF
|
|
* should keep track of how many VLAN filters it has added and not attempt to
|
|
* add more than max_filters.
|
|
*/
|
|
struct virtchnl_vlan_filtering_caps {
|
|
struct virtchnl_vlan_supported_caps filtering_support;
|
|
u32 ethertype_init;
|
|
u16 max_filters;
|
|
u8 pad[2];
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_vlan_filtering_caps);
|
|
|
|
/* This enum is used for the virtchnl_vlan_offload_caps structure to specify
|
|
* if the PF supports a different ethertype for stripping and insertion.
|
|
*
|
|
* VIRTCHNL_ETHERTYPE_STRIPPING_MATCHES_INSERTION - The ethertype(s) specified
|
|
* for stripping affect the ethertype(s) specified for insertion and visa versa
|
|
* as well. If the VF tries to configure VLAN stripping via
|
|
* VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 with VIRTCHNL_VLAN_ETHERTYPE_8100 then
|
|
* that will be the ethertype for both stripping and insertion.
|
|
*
|
|
* VIRTCHNL_ETHERTYPE_MATCH_NOT_REQUIRED - The ethertype(s) specified for
|
|
* stripping do not affect the ethertype(s) specified for insertion and visa
|
|
* versa.
|
|
*/
|
|
enum virtchnl_vlan_ethertype_match {
|
|
VIRTCHNL_ETHERTYPE_STRIPPING_MATCHES_INSERTION = 0,
|
|
VIRTCHNL_ETHERTYPE_MATCH_NOT_REQUIRED = 1,
|
|
};
|
|
|
|
/* The PF populates these fields based on the supported VLAN offloads. If a
|
|
* field is VIRTCHNL_VLAN_UNSUPPORTED then it's not supported and the PF will
|
|
* reject any VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 or
|
|
* VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2 messages using the unsupported fields.
|
|
*
|
|
* Also, a VF is only allowed to toggle its VLAN offload setting if the
|
|
* VIRTCHNL_VLAN_TOGGLE_ALLOWED bit is set.
|
|
*
|
|
* The VF driver needs to be aware of how the tags are stripped by hardware and
|
|
* inserted by the VF driver based on the level of offload support. The PF will
|
|
* populate these fields based on where the VLAN tags are expected to be
|
|
* offloaded via the VIRTHCNL_VLAN_TAG_LOCATION_* bits. The VF will need to
|
|
* interpret these fields. See the definition of the
|
|
* VIRTCHNL_VLAN_TAG_LOCATION_* bits above the virtchnl_vlan_support
|
|
* enumeration.
|
|
*/
|
|
struct virtchnl_vlan_offload_caps {
|
|
struct virtchnl_vlan_supported_caps stripping_support;
|
|
struct virtchnl_vlan_supported_caps insertion_support;
|
|
u32 ethertype_init;
|
|
u8 ethertype_match;
|
|
u8 pad[3];
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(24, virtchnl_vlan_offload_caps);
|
|
|
|
/* VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS
|
|
* VF sends this message to determine its VLAN capabilities.
|
|
*
|
|
* PF will mark which capabilities it supports based on hardware support and
|
|
* current configuration. For example, if a port VLAN is configured the PF will
|
|
* not allow outer VLAN filtering, stripping, or insertion to be configured so
|
|
* it will block these features from the VF.
|
|
*
|
|
* The VF will need to cross reference its capabilities with the PFs
|
|
* capabilities in the response message from the PF to determine the VLAN
|
|
* support.
|
|
*/
|
|
struct virtchnl_vlan_caps {
|
|
struct virtchnl_vlan_filtering_caps filtering;
|
|
struct virtchnl_vlan_offload_caps offloads;
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(40, virtchnl_vlan_caps);
|
|
|
|
struct virtchnl_vlan {
|
|
u16 tci; /* tci[15:13] = PCP and tci[11:0] = VID */
|
|
u16 tci_mask; /* only valid if VIRTCHNL_VLAN_FILTER_MASK set in
|
|
* filtering caps
|
|
*/
|
|
u16 tpid; /* 0x8100, 0x88a8, etc. and only type(s) set in
|
|
* filtering caps. Note that tpid here does not refer to
|
|
* VIRTCHNL_VLAN_ETHERTYPE_*, but it refers to the
|
|
* actual 2-byte VLAN TPID
|
|
*/
|
|
u8 pad[2];
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_vlan);
|
|
|
|
struct virtchnl_vlan_filter {
|
|
struct virtchnl_vlan inner;
|
|
struct virtchnl_vlan outer;
|
|
u8 pad[16];
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(32, virtchnl_vlan_filter);
|
|
|
|
/* VIRTCHNL_OP_ADD_VLAN_V2
|
|
* VIRTCHNL_OP_DEL_VLAN_V2
|
|
*
|
|
* VF sends these messages to add/del one or more VLAN tag filters for Rx
|
|
* traffic.
|
|
*
|
|
* The PF attempts to add the filters and returns status.
|
|
*
|
|
* The VF should only ever attempt to add/del virtchnl_vlan_filter(s) using the
|
|
* supported fields negotiated via VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS.
|
|
*/
|
|
struct virtchnl_vlan_filter_list_v2 {
|
|
u16 vport_id;
|
|
u16 num_elements;
|
|
u8 pad[4];
|
|
struct virtchnl_vlan_filter filters[1];
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(40, virtchnl_vlan_filter_list_v2);
|
|
|
|
/* VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2
|
|
* VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2
|
|
* VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2
|
|
* VIRTCHNL_OP_DISABLE_VLAN_INSERTION_V2
|
|
*
|
|
* VF sends this message to enable or disable VLAN stripping or insertion. It
|
|
* also needs to specify an ethertype. The VF knows which VLAN ethertypes are
|
|
* allowed and whether or not it's allowed to enable/disable the specific
|
|
* offload via the VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS message. The VF needs to
|
|
* parse the virtchnl_vlan_caps.offloads fields to determine which offload
|
|
* messages are allowed.
|
|
*
|
|
* For example, if the PF populates the virtchnl_vlan_caps.offloads in the
|
|
* following manner the VF will be allowed to enable and/or disable 0x8100 inner
|
|
* VLAN insertion and/or stripping via the opcodes listed above. Inner in this
|
|
* case means the outer most or single VLAN from the VF's perspective. This is
|
|
* because no outer offloads are supported. See the comments above the
|
|
* virtchnl_vlan_supported_caps structure for more details.
|
|
*
|
|
* virtchnl_vlan_caps.offloads.stripping_support.inner =
|
|
* VIRTCHNL_VLAN_TOGGLE |
|
|
* VIRTCHNL_VLAN_ETHERTYPE_8100;
|
|
*
|
|
* virtchnl_vlan_caps.offloads.insertion_support.inner =
|
|
* VIRTCHNL_VLAN_TOGGLE |
|
|
* VIRTCHNL_VLAN_ETHERTYPE_8100;
|
|
*
|
|
* In order to enable inner (again note that in this case inner is the outer
|
|
* most or single VLAN from the VF's perspective) VLAN stripping for 0x8100
|
|
* VLANs, the VF would populate the virtchnl_vlan_setting structure in the
|
|
* following manner and send the VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 message.
|
|
*
|
|
* virtchnl_vlan_setting.inner_ethertype_setting =
|
|
* VIRTCHNL_VLAN_ETHERTYPE_8100;
|
|
*
|
|
* virtchnl_vlan_setting.vport_id = vport_id or vsi_id assigned to the VF on
|
|
* initialization.
|
|
*
|
|
* The reason that VLAN TPID(s) are not being used for the
|
|
* outer_ethertype_setting and inner_ethertype_setting fields is because it's
|
|
* possible a device could support VLAN insertion and/or stripping offload on
|
|
* multiple ethertypes concurrently, so this method allows a VF to request
|
|
* multiple ethertypes in one message using the virtchnl_vlan_support
|
|
* enumeration.
|
|
*
|
|
* For example, if the PF populates the virtchnl_vlan_caps.offloads in the
|
|
* following manner the VF will be allowed to enable 0x8100 and 0x88a8 outer
|
|
* VLAN insertion and stripping simultaneously. The
|
|
* virtchnl_vlan_caps.offloads.ethertype_match field will also have to be
|
|
* populated based on what the PF can support.
|
|
*
|
|
* virtchnl_vlan_caps.offloads.stripping_support.outer =
|
|
* VIRTCHNL_VLAN_TOGGLE |
|
|
* VIRTCHNL_VLAN_ETHERTYPE_8100 |
|
|
* VIRTCHNL_VLAN_ETHERTYPE_88A8 |
|
|
* VIRTCHNL_VLAN_ETHERTYPE_AND;
|
|
*
|
|
* virtchnl_vlan_caps.offloads.insertion_support.outer =
|
|
* VIRTCHNL_VLAN_TOGGLE |
|
|
* VIRTCHNL_VLAN_ETHERTYPE_8100 |
|
|
* VIRTCHNL_VLAN_ETHERTYPE_88A8 |
|
|
* VIRTCHNL_VLAN_ETHERTYPE_AND;
|
|
*
|
|
* In order to enable outer VLAN stripping for 0x8100 and 0x88a8 VLANs, the VF
|
|
* would populate the virthcnl_vlan_offload_structure in the following manner
|
|
* and send the VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2 message.
|
|
*
|
|
* virtchnl_vlan_setting.outer_ethertype_setting =
|
|
* VIRTHCNL_VLAN_ETHERTYPE_8100 |
|
|
* VIRTHCNL_VLAN_ETHERTYPE_88A8;
|
|
*
|
|
* virtchnl_vlan_setting.vport_id = vport_id or vsi_id assigned to the VF on
|
|
* initialization.
|
|
*
|
|
* There is also the case where a PF and the underlying hardware can support
|
|
* VLAN offloads on multiple ethertypes, but not concurrently. For example, if
|
|
* the PF populates the virtchnl_vlan_caps.offloads in the following manner the
|
|
* VF will be allowed to enable and/or disable 0x8100 XOR 0x88a8 outer VLAN
|
|
* offloads. The ethertypes must match for stripping and insertion.
|
|
*
|
|
* virtchnl_vlan_caps.offloads.stripping_support.outer =
|
|
* VIRTCHNL_VLAN_TOGGLE |
|
|
* VIRTCHNL_VLAN_ETHERTYPE_8100 |
|
|
* VIRTCHNL_VLAN_ETHERTYPE_88A8 |
|
|
* VIRTCHNL_VLAN_ETHERTYPE_XOR;
|
|
*
|
|
* virtchnl_vlan_caps.offloads.insertion_support.outer =
|
|
* VIRTCHNL_VLAN_TOGGLE |
|
|
* VIRTCHNL_VLAN_ETHERTYPE_8100 |
|
|
* VIRTCHNL_VLAN_ETHERTYPE_88A8 |
|
|
* VIRTCHNL_VLAN_ETHERTYPE_XOR;
|
|
*
|
|
* virtchnl_vlan_caps.offloads.ethertype_match =
|
|
* VIRTCHNL_ETHERTYPE_STRIPPING_MATCHES_INSERTION;
|
|
*
|
|
* In order to enable outer VLAN stripping for 0x88a8 VLANs, the VF would
|
|
* populate the virtchnl_vlan_setting structure in the following manner and send
|
|
* the VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2. Also, this will change the
|
|
* ethertype for VLAN insertion if it's enabled. So, for completeness, a
|
|
* VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2 with the same ethertype should be sent.
|
|
*
|
|
* virtchnl_vlan_setting.outer_ethertype_setting = VIRTHCNL_VLAN_ETHERTYPE_88A8;
|
|
*
|
|
* virtchnl_vlan_setting.vport_id = vport_id or vsi_id assigned to the VF on
|
|
* initialization.
|
|
*
|
|
* VIRTCHNL_OP_ENABLE_VLAN_FILTERING_V2
|
|
* VIRTCHNL_OP_DISABLE_VLAN_FILTERING_V2
|
|
*
|
|
* VF sends this message to enable or disable VLAN filtering. It also needs to
|
|
* specify an ethertype. The VF knows which VLAN ethertypes are allowed and
|
|
* whether or not it's allowed to enable/disable filtering via the
|
|
* VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS message. The VF needs to
|
|
* parse the virtchnl_vlan_caps.filtering fields to determine which, if any,
|
|
* filtering messages are allowed.
|
|
*
|
|
* For example, if the PF populates the virtchnl_vlan_caps.filtering in the
|
|
* following manner the VF will be allowed to enable/disable 0x8100 and 0x88a8
|
|
* outer VLAN filtering together. Note, that the VIRTCHNL_VLAN_ETHERTYPE_AND
|
|
* means that all filtering ethertypes will to be enabled and disabled together
|
|
* regardless of the request from the VF. This means that the underlying
|
|
* hardware only supports VLAN filtering for all VLAN the specified ethertypes
|
|
* or none of them.
|
|
*
|
|
* virtchnl_vlan_caps.filtering.filtering_support.outer =
|
|
* VIRTCHNL_VLAN_TOGGLE |
|
|
* VIRTCHNL_VLAN_ETHERTYPE_8100 |
|
|
* VIRTHCNL_VLAN_ETHERTYPE_88A8 |
|
|
* VIRTCHNL_VLAN_ETHERTYPE_9100 |
|
|
* VIRTCHNL_VLAN_ETHERTYPE_AND;
|
|
*
|
|
* In order to enable outer VLAN filtering for 0x88a8 and 0x8100 VLANs (0x9100
|
|
* VLANs aren't supported by the VF driver), the VF would populate the
|
|
* virtchnl_vlan_setting structure in the following manner and send the
|
|
* VIRTCHNL_OP_ENABLE_VLAN_FILTERING_V2. The same message format would be used
|
|
* to disable outer VLAN filtering for 0x88a8 and 0x8100 VLANs, but the
|
|
* VIRTCHNL_OP_DISABLE_VLAN_FILTERING_V2 opcode is used.
|
|
*
|
|
* virtchnl_vlan_setting.outer_ethertype_setting =
|
|
* VIRTCHNL_VLAN_ETHERTYPE_8100 |
|
|
* VIRTCHNL_VLAN_ETHERTYPE_88A8;
|
|
*
|
|
*/
|
|
struct virtchnl_vlan_setting {
|
|
u32 outer_ethertype_setting;
|
|
u32 inner_ethertype_setting;
|
|
u16 vport_id;
|
|
u8 pad[6];
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_vlan_setting);
|
|
|
|
/* VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE
|
|
* VF sends VSI id and flags.
|
|
* PF returns status code in retval.
|
|
* Note: we assume that broadcast accept mode is always enabled.
|
|
*/
|
|
struct virtchnl_promisc_info {
|
|
u16 vsi_id;
|
|
u16 flags;
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(4, virtchnl_promisc_info);
|
|
|
|
#define FLAG_VF_UNICAST_PROMISC 0x00000001
|
|
#define FLAG_VF_MULTICAST_PROMISC 0x00000002
|
|
|
|
/* VIRTCHNL_OP_GET_STATS
|
|
* VF sends this message to request stats for the selected VSI. VF uses
|
|
* the virtchnl_queue_select struct to specify the VSI. The queue_id
|
|
* field is ignored by the PF.
|
|
*
|
|
* PF replies with struct virtchnl_eth_stats in an external buffer.
|
|
*/
|
|
|
|
struct virtchnl_eth_stats {
|
|
u64 rx_bytes; /* received bytes */
|
|
u64 rx_unicast; /* received unicast pkts */
|
|
u64 rx_multicast; /* received multicast pkts */
|
|
u64 rx_broadcast; /* received broadcast pkts */
|
|
u64 rx_discards;
|
|
u64 rx_unknown_protocol;
|
|
u64 tx_bytes; /* transmitted bytes */
|
|
u64 tx_unicast; /* transmitted unicast pkts */
|
|
u64 tx_multicast; /* transmitted multicast pkts */
|
|
u64 tx_broadcast; /* transmitted broadcast pkts */
|
|
u64 tx_discards;
|
|
u64 tx_errors;
|
|
};
|
|
|
|
/* VIRTCHNL_OP_CONFIG_RSS_KEY
|
|
* VIRTCHNL_OP_CONFIG_RSS_LUT
|
|
* VF sends these messages to configure RSS. Only supported if both PF
|
|
* and VF drivers set the VIRTCHNL_VF_OFFLOAD_RSS_PF bit during
|
|
* configuration negotiation. If this is the case, then the RSS fields in
|
|
* the VF resource struct are valid.
|
|
* Both the key and LUT are initialized to 0 by the PF, meaning that
|
|
* RSS is effectively disabled until set up by the VF.
|
|
*/
|
|
struct virtchnl_rss_key {
|
|
u16 vsi_id;
|
|
u16 key_len;
|
|
u8 key[1]; /* RSS hash key, packed bytes */
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(6, virtchnl_rss_key);
|
|
|
|
struct virtchnl_rss_lut {
|
|
u16 vsi_id;
|
|
u16 lut_entries;
|
|
u8 lut[1]; /* RSS lookup table */
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(6, virtchnl_rss_lut);
|
|
|
|
/* VIRTCHNL_OP_GET_RSS_HENA_CAPS
|
|
* VIRTCHNL_OP_SET_RSS_HENA
|
|
* VF sends these messages to get and set the hash filter enable bits for RSS.
|
|
* By default, the PF sets these to all possible traffic types that the
|
|
* hardware supports. The VF can query this value if it wants to change the
|
|
* traffic types that are hashed by the hardware.
|
|
*/
|
|
struct virtchnl_rss_hena {
|
|
u64 hena;
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_rss_hena);
|
|
|
|
/* Type of RSS algorithm */
|
|
enum virtchnl_rss_algorithm {
|
|
VIRTCHNL_RSS_ALG_TOEPLITZ_ASYMMETRIC = 0,
|
|
VIRTCHNL_RSS_ALG_XOR_ASYMMETRIC = 1,
|
|
VIRTCHNL_RSS_ALG_TOEPLITZ_SYMMETRIC = 2,
|
|
VIRTCHNL_RSS_ALG_XOR_SYMMETRIC = 3,
|
|
};
|
|
|
|
/* This is used by PF driver to enforce how many channels can be supported.
|
|
* When ADQ_V2 capability is negotiated, it will allow 16 channels otherwise
|
|
* PF driver will allow only max 4 channels
|
|
*/
|
|
#define VIRTCHNL_MAX_ADQ_CHANNELS 4
|
|
#define VIRTCHNL_MAX_ADQ_V2_CHANNELS 16
|
|
|
|
/* VIRTCHNL_OP_ENABLE_CHANNELS
|
|
* VIRTCHNL_OP_DISABLE_CHANNELS
|
|
* VF sends these messages to enable or disable channels based on
|
|
* the user specified queue count and queue offset for each traffic class.
|
|
* This struct encompasses all the information that the PF needs from
|
|
* VF to create a channel.
|
|
*/
|
|
struct virtchnl_channel_info {
|
|
u16 count; /* number of queues in a channel */
|
|
u16 offset; /* queues in a channel start from 'offset' */
|
|
u32 pad;
|
|
u64 max_tx_rate;
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_channel_info);
|
|
|
|
struct virtchnl_tc_info {
|
|
u32 num_tc;
|
|
u32 pad;
|
|
struct virtchnl_channel_info list[1];
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(24, virtchnl_tc_info);
|
|
|
|
/* VIRTCHNL_ADD_CLOUD_FILTER
|
|
* VIRTCHNL_DEL_CLOUD_FILTER
|
|
* VF sends these messages to add or delete a cloud filter based on the
|
|
* user specified match and action filters. These structures encompass
|
|
* all the information that the PF needs from the VF to add/delete a
|
|
* cloud filter.
|
|
*/
|
|
|
|
struct virtchnl_l4_spec {
|
|
u8 src_mac[VIRTCHNL_ETH_LENGTH_OF_ADDRESS];
|
|
u8 dst_mac[VIRTCHNL_ETH_LENGTH_OF_ADDRESS];
|
|
/* vlan_prio is part of this 16 bit field even from OS perspective
|
|
* vlan_id:12 is actual vlan_id, then vlanid:bit14..12 is vlan_prio
|
|
* in future, when decided to offload vlan_prio, pass that information
|
|
* as part of the "vlan_id" field, Bit14..12
|
|
*/
|
|
__be16 vlan_id;
|
|
__be16 pad; /* reserved for future use */
|
|
__be32 src_ip[4];
|
|
__be32 dst_ip[4];
|
|
__be16 src_port;
|
|
__be16 dst_port;
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(52, virtchnl_l4_spec);
|
|
|
|
union virtchnl_flow_spec {
|
|
struct virtchnl_l4_spec tcp_spec;
|
|
u8 buffer[128]; /* reserved for future use */
|
|
};
|
|
|
|
VIRTCHNL_CHECK_UNION_LEN(128, virtchnl_flow_spec);
|
|
|
|
enum virtchnl_action {
|
|
/* action types */
|
|
VIRTCHNL_ACTION_DROP = 0,
|
|
VIRTCHNL_ACTION_TC_REDIRECT,
|
|
VIRTCHNL_ACTION_PASSTHRU,
|
|
VIRTCHNL_ACTION_QUEUE,
|
|
VIRTCHNL_ACTION_Q_REGION,
|
|
VIRTCHNL_ACTION_MARK,
|
|
VIRTCHNL_ACTION_COUNT,
|
|
};
|
|
|
|
enum virtchnl_flow_type {
|
|
/* flow types */
|
|
VIRTCHNL_TCP_V4_FLOW = 0,
|
|
VIRTCHNL_TCP_V6_FLOW,
|
|
VIRTCHNL_UDP_V4_FLOW,
|
|
VIRTCHNL_UDP_V6_FLOW,
|
|
};
|
|
|
|
struct virtchnl_filter {
|
|
union virtchnl_flow_spec data;
|
|
union virtchnl_flow_spec mask;
|
|
|
|
/* see enum virtchnl_flow_type */
|
|
s32 flow_type;
|
|
|
|
/* see enum virtchnl_action */
|
|
s32 action;
|
|
u32 action_meta;
|
|
u8 field_flags;
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(272, virtchnl_filter);
|
|
|
|
/* VIRTCHNL_OP_DCF_GET_VSI_MAP
|
|
* VF sends this message to get VSI mapping table.
|
|
* PF responds with an indirect message containing VF's
|
|
* HW VSI IDs.
|
|
* The index of vf_vsi array is the logical VF ID, the
|
|
* value of vf_vsi array is the VF's HW VSI ID with its
|
|
* valid configuration.
|
|
*/
|
|
struct virtchnl_dcf_vsi_map {
|
|
u16 pf_vsi; /* PF's HW VSI ID */
|
|
u16 num_vfs; /* The actual number of VFs allocated */
|
|
#define VIRTCHNL_DCF_VF_VSI_ID_S 0
|
|
#define VIRTCHNL_DCF_VF_VSI_ID_M (0xFFF << VIRTCHNL_DCF_VF_VSI_ID_S)
|
|
#define VIRTCHNL_DCF_VF_VSI_VALID BIT(15)
|
|
u16 vf_vsi[1];
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(6, virtchnl_dcf_vsi_map);
|
|
|
|
#define PKG_NAME_SIZE 32
|
|
#define DSN_SIZE 8
|
|
|
|
struct pkg_version {
|
|
u8 major;
|
|
u8 minor;
|
|
u8 update;
|
|
u8 draft;
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(4, pkg_version);
|
|
|
|
struct virtchnl_pkg_info {
|
|
struct pkg_version pkg_ver;
|
|
u32 track_id;
|
|
char pkg_name[PKG_NAME_SIZE];
|
|
u8 dsn[DSN_SIZE];
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(48, virtchnl_pkg_info);
|
|
|
|
/* VIRTCHNL_OP_DCF_VLAN_OFFLOAD
|
|
* DCF negotiates the VIRTCHNL_VF_OFFLOAD_VLAN_V2 capability firstly to get
|
|
* the double VLAN configuration, then DCF sends this message to configure the
|
|
* outer or inner VLAN offloads (insertion and strip) for the target VF.
|
|
*/
|
|
struct virtchnl_dcf_vlan_offload {
|
|
u16 vf_id;
|
|
u16 tpid;
|
|
u16 vlan_flags;
|
|
#define VIRTCHNL_DCF_VLAN_TYPE_S 0
|
|
#define VIRTCHNL_DCF_VLAN_TYPE_M \
|
|
(0x1 << VIRTCHNL_DCF_VLAN_TYPE_S)
|
|
#define VIRTCHNL_DCF_VLAN_TYPE_INNER 0x0
|
|
#define VIRTCHNL_DCF_VLAN_TYPE_OUTER 0x1
|
|
#define VIRTCHNL_DCF_VLAN_INSERT_MODE_S 1
|
|
#define VIRTCHNL_DCF_VLAN_INSERT_MODE_M \
|
|
(0x7 << VIRTCHNL_DCF_VLAN_INSERT_MODE_S)
|
|
#define VIRTCHNL_DCF_VLAN_INSERT_DISABLE 0x1
|
|
#define VIRTCHNL_DCF_VLAN_INSERT_PORT_BASED 0x2
|
|
#define VIRTCHNL_DCF_VLAN_INSERT_VIA_TX_DESC 0x3
|
|
#define VIRTCHNL_DCF_VLAN_STRIP_MODE_S 4
|
|
#define VIRTCHNL_DCF_VLAN_STRIP_MODE_M \
|
|
(0x7 << VIRTCHNL_DCF_VLAN_STRIP_MODE_S)
|
|
#define VIRTCHNL_DCF_VLAN_STRIP_DISABLE 0x1
|
|
#define VIRTCHNL_DCF_VLAN_STRIP_ONLY 0x2
|
|
#define VIRTCHNL_DCF_VLAN_STRIP_INTO_RX_DESC 0x3
|
|
u16 vlan_id;
|
|
u16 pad[4];
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_dcf_vlan_offload);
|
|
|
|
struct virtchnl_supported_rxdids {
|
|
/* see enum virtchnl_rx_desc_id_bitmasks */
|
|
u64 supported_rxdids;
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_supported_rxdids);
|
|
|
|
/* VIRTCHNL_OP_EVENT
|
|
* PF sends this message to inform the VF driver of events that may affect it.
|
|
* No direct response is expected from the VF, though it may generate other
|
|
* messages in response to this one.
|
|
*/
|
|
enum virtchnl_event_codes {
|
|
VIRTCHNL_EVENT_UNKNOWN = 0,
|
|
VIRTCHNL_EVENT_LINK_CHANGE,
|
|
VIRTCHNL_EVENT_RESET_IMPENDING,
|
|
VIRTCHNL_EVENT_PF_DRIVER_CLOSE,
|
|
VIRTCHNL_EVENT_DCF_VSI_MAP_UPDATE,
|
|
};
|
|
|
|
#define PF_EVENT_SEVERITY_INFO 0
|
|
#define PF_EVENT_SEVERITY_ATTENTION 1
|
|
#define PF_EVENT_SEVERITY_ACTION_REQUIRED 2
|
|
#define PF_EVENT_SEVERITY_CERTAIN_DOOM 255
|
|
|
|
struct virtchnl_pf_event {
|
|
/* see enum virtchnl_event_codes */
|
|
s32 event;
|
|
union {
|
|
/* If the PF driver does not support the new speed reporting
|
|
* capabilities then use link_event else use link_event_adv to
|
|
* get the speed and link information. The ability to understand
|
|
* new speeds is indicated by setting the capability flag
|
|
* VIRTCHNL_VF_CAP_ADV_LINK_SPEED in vf_cap_flags parameter
|
|
* in virtchnl_vf_resource struct and can be used to determine
|
|
* which link event struct to use below.
|
|
*/
|
|
struct {
|
|
enum virtchnl_link_speed link_speed;
|
|
u8 link_status;
|
|
} link_event;
|
|
struct {
|
|
/* link_speed provided in Mbps */
|
|
u32 link_speed;
|
|
u8 link_status;
|
|
} link_event_adv;
|
|
struct {
|
|
u16 vf_id;
|
|
u16 vsi_id;
|
|
} vf_vsi_map;
|
|
} event_data;
|
|
|
|
int severity;
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_pf_event);
|
|
|
|
|
|
/* VF reset states - these are written into the RSTAT register:
|
|
* VFGEN_RSTAT on the VF
|
|
* When the PF initiates a reset, it writes 0
|
|
* When the reset is complete, it writes 1
|
|
* When the PF detects that the VF has recovered, it writes 2
|
|
* VF checks this register periodically to determine if a reset has occurred,
|
|
* then polls it to know when the reset is complete.
|
|
* If either the PF or VF reads the register while the hardware
|
|
* is in a reset state, it will return DEADBEEF, which, when masked
|
|
* will result in 3.
|
|
*/
|
|
enum virtchnl_vfr_states {
|
|
VIRTCHNL_VFR_INPROGRESS = 0,
|
|
VIRTCHNL_VFR_COMPLETED,
|
|
VIRTCHNL_VFR_VFACTIVE,
|
|
};
|
|
|
|
#define VIRTCHNL_MAX_NUM_PROTO_HDRS 32
|
|
#define PROTO_HDR_SHIFT 5
|
|
#define PROTO_HDR_FIELD_START(proto_hdr_type) \
|
|
(proto_hdr_type << PROTO_HDR_SHIFT)
|
|
#define PROTO_HDR_FIELD_MASK ((1UL << PROTO_HDR_SHIFT) - 1)
|
|
|
|
/* VF use these macros to configure each protocol header.
|
|
* Specify which protocol headers and protocol header fields base on
|
|
* virtchnl_proto_hdr_type and virtchnl_proto_hdr_field.
|
|
* @param hdr: a struct of virtchnl_proto_hdr
|
|
* @param hdr_type: ETH/IPV4/TCP, etc
|
|
* @param field: SRC/DST/TEID/SPI, etc
|
|
*/
|
|
#define VIRTCHNL_ADD_PROTO_HDR_FIELD(hdr, field) \
|
|
((hdr)->field_selector |= BIT((field) & PROTO_HDR_FIELD_MASK))
|
|
#define VIRTCHNL_DEL_PROTO_HDR_FIELD(hdr, field) \
|
|
((hdr)->field_selector &= ~BIT((field) & PROTO_HDR_FIELD_MASK))
|
|
#define VIRTCHNL_TEST_PROTO_HDR_FIELD(hdr, val) \
|
|
((hdr)->field_selector & BIT((val) & PROTO_HDR_FIELD_MASK))
|
|
#define VIRTCHNL_GET_PROTO_HDR_FIELD(hdr) ((hdr)->field_selector)
|
|
|
|
#define VIRTCHNL_ADD_PROTO_HDR_FIELD_BIT(hdr, hdr_type, field) \
|
|
(VIRTCHNL_ADD_PROTO_HDR_FIELD(hdr, \
|
|
VIRTCHNL_PROTO_HDR_ ## hdr_type ## _ ## field))
|
|
#define VIRTCHNL_DEL_PROTO_HDR_FIELD_BIT(hdr, hdr_type, field) \
|
|
(VIRTCHNL_DEL_PROTO_HDR_FIELD(hdr, \
|
|
VIRTCHNL_PROTO_HDR_ ## hdr_type ## _ ## field))
|
|
|
|
#define VIRTCHNL_SET_PROTO_HDR_TYPE(hdr, hdr_type) \
|
|
((hdr)->type = VIRTCHNL_PROTO_HDR_ ## hdr_type)
|
|
#define VIRTCHNL_GET_PROTO_HDR_TYPE(hdr) \
|
|
(((hdr)->type) >> PROTO_HDR_SHIFT)
|
|
#define VIRTCHNL_TEST_PROTO_HDR_TYPE(hdr, val) \
|
|
((hdr)->type == ((val) >> PROTO_HDR_SHIFT))
|
|
#define VIRTCHNL_TEST_PROTO_HDR(hdr, val) \
|
|
(VIRTCHNL_TEST_PROTO_HDR_TYPE(hdr, val) && \
|
|
VIRTCHNL_TEST_PROTO_HDR_FIELD(hdr, val))
|
|
|
|
/* Protocol header type within a packet segment. A segment consists of one or
|
|
* more protocol headers that make up a logical group of protocol headers. Each
|
|
* logical group of protocol headers encapsulates or is encapsulated using/by
|
|
* tunneling or encapsulation protocols for network virtualization.
|
|
*/
|
|
enum virtchnl_proto_hdr_type {
|
|
VIRTCHNL_PROTO_HDR_NONE,
|
|
VIRTCHNL_PROTO_HDR_ETH,
|
|
VIRTCHNL_PROTO_HDR_S_VLAN,
|
|
VIRTCHNL_PROTO_HDR_C_VLAN,
|
|
VIRTCHNL_PROTO_HDR_IPV4,
|
|
VIRTCHNL_PROTO_HDR_IPV6,
|
|
VIRTCHNL_PROTO_HDR_TCP,
|
|
VIRTCHNL_PROTO_HDR_UDP,
|
|
VIRTCHNL_PROTO_HDR_SCTP,
|
|
VIRTCHNL_PROTO_HDR_GTPU_IP,
|
|
VIRTCHNL_PROTO_HDR_GTPU_EH,
|
|
VIRTCHNL_PROTO_HDR_GTPU_EH_PDU_DWN,
|
|
VIRTCHNL_PROTO_HDR_GTPU_EH_PDU_UP,
|
|
VIRTCHNL_PROTO_HDR_PPPOE,
|
|
VIRTCHNL_PROTO_HDR_L2TPV3,
|
|
VIRTCHNL_PROTO_HDR_ESP,
|
|
VIRTCHNL_PROTO_HDR_AH,
|
|
VIRTCHNL_PROTO_HDR_PFCP,
|
|
VIRTCHNL_PROTO_HDR_GTPC,
|
|
VIRTCHNL_PROTO_HDR_ECPRI,
|
|
VIRTCHNL_PROTO_HDR_L2TPV2,
|
|
VIRTCHNL_PROTO_HDR_PPP,
|
|
/* IPv4 and IPv6 Fragment header types are only associated to
|
|
* VIRTCHNL_PROTO_HDR_IPV4 and VIRTCHNL_PROTO_HDR_IPV6 respectively,
|
|
* cannot be used independently.
|
|
*/
|
|
VIRTCHNL_PROTO_HDR_IPV4_FRAG,
|
|
VIRTCHNL_PROTO_HDR_IPV6_EH_FRAG,
|
|
};
|
|
|
|
/* Protocol header field within a protocol header. */
|
|
enum virtchnl_proto_hdr_field {
|
|
/* ETHER */
|
|
VIRTCHNL_PROTO_HDR_ETH_SRC =
|
|
PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_ETH),
|
|
VIRTCHNL_PROTO_HDR_ETH_DST,
|
|
VIRTCHNL_PROTO_HDR_ETH_ETHERTYPE,
|
|
/* S-VLAN */
|
|
VIRTCHNL_PROTO_HDR_S_VLAN_ID =
|
|
PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_S_VLAN),
|
|
/* C-VLAN */
|
|
VIRTCHNL_PROTO_HDR_C_VLAN_ID =
|
|
PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_C_VLAN),
|
|
/* IPV4 */
|
|
VIRTCHNL_PROTO_HDR_IPV4_SRC =
|
|
PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_IPV4),
|
|
VIRTCHNL_PROTO_HDR_IPV4_DST,
|
|
VIRTCHNL_PROTO_HDR_IPV4_DSCP,
|
|
VIRTCHNL_PROTO_HDR_IPV4_TTL,
|
|
VIRTCHNL_PROTO_HDR_IPV4_PROT,
|
|
/* IPV6 */
|
|
VIRTCHNL_PROTO_HDR_IPV6_SRC =
|
|
PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_IPV6),
|
|
VIRTCHNL_PROTO_HDR_IPV6_DST,
|
|
VIRTCHNL_PROTO_HDR_IPV6_TC,
|
|
VIRTCHNL_PROTO_HDR_IPV6_HOP_LIMIT,
|
|
VIRTCHNL_PROTO_HDR_IPV6_PROT,
|
|
/* IPV6 Prefix */
|
|
VIRTCHNL_PROTO_HDR_IPV6_PREFIX32_SRC,
|
|
VIRTCHNL_PROTO_HDR_IPV6_PREFIX32_DST,
|
|
VIRTCHNL_PROTO_HDR_IPV6_PREFIX40_SRC,
|
|
VIRTCHNL_PROTO_HDR_IPV6_PREFIX40_DST,
|
|
VIRTCHNL_PROTO_HDR_IPV6_PREFIX48_SRC,
|
|
VIRTCHNL_PROTO_HDR_IPV6_PREFIX48_DST,
|
|
VIRTCHNL_PROTO_HDR_IPV6_PREFIX56_SRC,
|
|
VIRTCHNL_PROTO_HDR_IPV6_PREFIX56_DST,
|
|
VIRTCHNL_PROTO_HDR_IPV6_PREFIX64_SRC,
|
|
VIRTCHNL_PROTO_HDR_IPV6_PREFIX64_DST,
|
|
VIRTCHNL_PROTO_HDR_IPV6_PREFIX96_SRC,
|
|
VIRTCHNL_PROTO_HDR_IPV6_PREFIX96_DST,
|
|
/* TCP */
|
|
VIRTCHNL_PROTO_HDR_TCP_SRC_PORT =
|
|
PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_TCP),
|
|
VIRTCHNL_PROTO_HDR_TCP_DST_PORT,
|
|
/* UDP */
|
|
VIRTCHNL_PROTO_HDR_UDP_SRC_PORT =
|
|
PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_UDP),
|
|
VIRTCHNL_PROTO_HDR_UDP_DST_PORT,
|
|
/* SCTP */
|
|
VIRTCHNL_PROTO_HDR_SCTP_SRC_PORT =
|
|
PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_SCTP),
|
|
VIRTCHNL_PROTO_HDR_SCTP_DST_PORT,
|
|
/* GTPU_IP */
|
|
VIRTCHNL_PROTO_HDR_GTPU_IP_TEID =
|
|
PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_GTPU_IP),
|
|
/* GTPU_EH */
|
|
VIRTCHNL_PROTO_HDR_GTPU_EH_PDU =
|
|
PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_GTPU_EH),
|
|
VIRTCHNL_PROTO_HDR_GTPU_EH_QFI,
|
|
/* PPPOE */
|
|
VIRTCHNL_PROTO_HDR_PPPOE_SESS_ID =
|
|
PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_PPPOE),
|
|
/* L2TPV3 */
|
|
VIRTCHNL_PROTO_HDR_L2TPV3_SESS_ID =
|
|
PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_L2TPV3),
|
|
/* ESP */
|
|
VIRTCHNL_PROTO_HDR_ESP_SPI =
|
|
PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_ESP),
|
|
/* AH */
|
|
VIRTCHNL_PROTO_HDR_AH_SPI =
|
|
PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_AH),
|
|
/* PFCP */
|
|
VIRTCHNL_PROTO_HDR_PFCP_S_FIELD =
|
|
PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_PFCP),
|
|
VIRTCHNL_PROTO_HDR_PFCP_SEID,
|
|
/* GTPC */
|
|
VIRTCHNL_PROTO_HDR_GTPC_TEID =
|
|
PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_GTPC),
|
|
/* ECPRI */
|
|
VIRTCHNL_PROTO_HDR_ECPRI_MSG_TYPE =
|
|
PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_ECPRI),
|
|
VIRTCHNL_PROTO_HDR_ECPRI_PC_RTC_ID,
|
|
/* IPv4 Dummy Fragment */
|
|
VIRTCHNL_PROTO_HDR_IPV4_FRAG_PKID =
|
|
PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_IPV4_FRAG),
|
|
/* IPv6 Extension Fragment */
|
|
VIRTCHNL_PROTO_HDR_IPV6_EH_FRAG_PKID =
|
|
PROTO_HDR_FIELD_START(VIRTCHNL_PROTO_HDR_IPV6_EH_FRAG),
|
|
};
|
|
|
|
struct virtchnl_proto_hdr {
|
|
/* see enum virtchnl_proto_hdr_type */
|
|
s32 type;
|
|
u32 field_selector; /* a bit mask to select field for header type */
|
|
u8 buffer[64];
|
|
/**
|
|
* binary buffer in network order for specific header type.
|
|
* For example, if type = VIRTCHNL_PROTO_HDR_IPV4, a IPv4
|
|
* header is expected to be copied into the buffer.
|
|
*/
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(72, virtchnl_proto_hdr);
|
|
|
|
struct virtchnl_proto_hdrs {
|
|
u8 tunnel_level;
|
|
/**
|
|
* specify where protocol header start from.
|
|
* 0 - from the outer layer
|
|
* 1 - from the first inner layer
|
|
* 2 - from the second inner layer
|
|
* ....
|
|
**/
|
|
int count; /* the proto layers must < VIRTCHNL_MAX_NUM_PROTO_HDRS */
|
|
struct virtchnl_proto_hdr proto_hdr[VIRTCHNL_MAX_NUM_PROTO_HDRS];
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(2312, virtchnl_proto_hdrs);
|
|
|
|
struct virtchnl_rss_cfg {
|
|
struct virtchnl_proto_hdrs proto_hdrs; /* protocol headers */
|
|
|
|
/* see enum virtchnl_rss_algorithm; rss algorithm type */
|
|
s32 rss_algorithm;
|
|
u8 reserved[128]; /* reserve for future */
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(2444, virtchnl_rss_cfg);
|
|
|
|
/* action configuration for FDIR */
|
|
struct virtchnl_filter_action {
|
|
/* see enum virtchnl_action type */
|
|
s32 type;
|
|
union {
|
|
/* used for queue and qgroup action */
|
|
struct {
|
|
u16 index;
|
|
u8 region;
|
|
} queue;
|
|
/* used for count action */
|
|
struct {
|
|
/* share counter ID with other flow rules */
|
|
u8 shared;
|
|
u32 id; /* counter ID */
|
|
} count;
|
|
/* used for mark action */
|
|
u32 mark_id;
|
|
u8 reserve[32];
|
|
} act_conf;
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(36, virtchnl_filter_action);
|
|
|
|
#define VIRTCHNL_MAX_NUM_ACTIONS 8
|
|
|
|
struct virtchnl_filter_action_set {
|
|
/* action number must be less then VIRTCHNL_MAX_NUM_ACTIONS */
|
|
int count;
|
|
struct virtchnl_filter_action actions[VIRTCHNL_MAX_NUM_ACTIONS];
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(292, virtchnl_filter_action_set);
|
|
|
|
/* pattern and action for FDIR rule */
|
|
struct virtchnl_fdir_rule {
|
|
struct virtchnl_proto_hdrs proto_hdrs;
|
|
struct virtchnl_filter_action_set action_set;
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(2604, virtchnl_fdir_rule);
|
|
|
|
/* query information to retrieve fdir rule counters.
|
|
* PF will fill out this structure to reset counter.
|
|
*/
|
|
struct virtchnl_fdir_query_info {
|
|
u32 match_packets_valid:1;
|
|
u32 match_bytes_valid:1;
|
|
u32 reserved:30; /* Reserved, must be zero. */
|
|
u32 pad;
|
|
u64 matched_packets; /* Number of packets for this rule. */
|
|
u64 matched_bytes; /* Number of bytes through this rule. */
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(24, virtchnl_fdir_query_info);
|
|
|
|
/* Status returned to VF after VF requests FDIR commands
|
|
* VIRTCHNL_FDIR_SUCCESS
|
|
* VF FDIR related request is successfully done by PF
|
|
* The request can be OP_ADD/DEL/QUERY_FDIR_FILTER.
|
|
*
|
|
* VIRTCHNL_FDIR_FAILURE_RULE_NORESOURCE
|
|
* OP_ADD_FDIR_FILTER request is failed due to no Hardware resource.
|
|
*
|
|
* VIRTCHNL_FDIR_FAILURE_RULE_EXIST
|
|
* OP_ADD_FDIR_FILTER request is failed due to the rule is already existed.
|
|
*
|
|
* VIRTCHNL_FDIR_FAILURE_RULE_CONFLICT
|
|
* OP_ADD_FDIR_FILTER request is failed due to conflict with existing rule.
|
|
*
|
|
* VIRTCHNL_FDIR_FAILURE_RULE_NONEXIST
|
|
* OP_DEL_FDIR_FILTER request is failed due to this rule doesn't exist.
|
|
*
|
|
* VIRTCHNL_FDIR_FAILURE_RULE_INVALID
|
|
* OP_ADD_FDIR_FILTER request is failed due to parameters validation
|
|
* or HW doesn't support.
|
|
*
|
|
* VIRTCHNL_FDIR_FAILURE_RULE_TIMEOUT
|
|
* OP_ADD/DEL_FDIR_FILTER request is failed due to timing out
|
|
* for programming.
|
|
*
|
|
* VIRTCHNL_FDIR_FAILURE_QUERY_INVALID
|
|
* OP_QUERY_FDIR_FILTER request is failed due to parameters validation,
|
|
* for example, VF query counter of a rule who has no counter action.
|
|
*/
|
|
enum virtchnl_fdir_prgm_status {
|
|
VIRTCHNL_FDIR_SUCCESS = 0,
|
|
VIRTCHNL_FDIR_FAILURE_RULE_NORESOURCE,
|
|
VIRTCHNL_FDIR_FAILURE_RULE_EXIST,
|
|
VIRTCHNL_FDIR_FAILURE_RULE_CONFLICT,
|
|
VIRTCHNL_FDIR_FAILURE_RULE_NONEXIST,
|
|
VIRTCHNL_FDIR_FAILURE_RULE_INVALID,
|
|
VIRTCHNL_FDIR_FAILURE_RULE_TIMEOUT,
|
|
VIRTCHNL_FDIR_FAILURE_QUERY_INVALID,
|
|
};
|
|
|
|
/* VIRTCHNL_OP_ADD_FDIR_FILTER
|
|
* VF sends this request to PF by filling out vsi_id,
|
|
* validate_only and rule_cfg. PF will return flow_id
|
|
* if the request is successfully done and return add_status to VF.
|
|
*/
|
|
struct virtchnl_fdir_add {
|
|
u16 vsi_id; /* INPUT */
|
|
/*
|
|
* 1 for validating a fdir rule, 0 for creating a fdir rule.
|
|
* Validate and create share one ops: VIRTCHNL_OP_ADD_FDIR_FILTER.
|
|
*/
|
|
u16 validate_only; /* INPUT */
|
|
u32 flow_id; /* OUTPUT */
|
|
struct virtchnl_fdir_rule rule_cfg; /* INPUT */
|
|
|
|
/* see enum virtchnl_fdir_prgm_status; OUTPUT */
|
|
s32 status;
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(2616, virtchnl_fdir_add);
|
|
|
|
/* VIRTCHNL_OP_DEL_FDIR_FILTER
|
|
* VF sends this request to PF by filling out vsi_id
|
|
* and flow_id. PF will return del_status to VF.
|
|
*/
|
|
struct virtchnl_fdir_del {
|
|
u16 vsi_id; /* INPUT */
|
|
u16 pad;
|
|
u32 flow_id; /* INPUT */
|
|
|
|
/* see enum virtchnl_fdir_prgm_status; OUTPUT */
|
|
s32 status;
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_fdir_del);
|
|
|
|
/* VIRTCHNL_OP_QUERY_FDIR_FILTER
|
|
* VF sends this request to PF by filling out vsi_id,
|
|
* flow_id and reset_counter. PF will return query_info
|
|
* and query_status to VF.
|
|
*/
|
|
struct virtchnl_fdir_query {
|
|
u16 vsi_id; /* INPUT */
|
|
u16 pad1[3];
|
|
u32 flow_id; /* INPUT */
|
|
u32 reset_counter:1; /* INPUT */
|
|
struct virtchnl_fdir_query_info query_info; /* OUTPUT */
|
|
|
|
/* see enum virtchnl_fdir_prgm_status; OUTPUT */
|
|
s32 status;
|
|
u32 pad2;
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(48, virtchnl_fdir_query);
|
|
|
|
/* TX and RX queue types are valid in legacy as well as split queue models.
|
|
* With Split Queue model, 2 additional types are introduced - TX_COMPLETION
|
|
* and RX_BUFFER. In split queue model, RX corresponds to the queue where HW
|
|
* posts completions.
|
|
*/
|
|
enum virtchnl_queue_type {
|
|
VIRTCHNL_QUEUE_TYPE_TX = 0,
|
|
VIRTCHNL_QUEUE_TYPE_RX = 1,
|
|
VIRTCHNL_QUEUE_TYPE_TX_COMPLETION = 2,
|
|
VIRTCHNL_QUEUE_TYPE_RX_BUFFER = 3,
|
|
VIRTCHNL_QUEUE_TYPE_CONFIG_TX = 4,
|
|
VIRTCHNL_QUEUE_TYPE_CONFIG_RX = 5
|
|
};
|
|
|
|
|
|
/* structure to specify a chunk of contiguous queues */
|
|
struct virtchnl_queue_chunk {
|
|
/* see enum virtchnl_queue_type */
|
|
s32 type;
|
|
u16 start_queue_id;
|
|
u16 num_queues;
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_queue_chunk);
|
|
|
|
/* structure to specify several chunks of contiguous queues */
|
|
struct virtchnl_queue_chunks {
|
|
u16 num_chunks;
|
|
u16 rsvd;
|
|
struct virtchnl_queue_chunk chunks[1];
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_queue_chunks);
|
|
|
|
|
|
/* VIRTCHNL_OP_ENABLE_QUEUES_V2
|
|
* VIRTCHNL_OP_DISABLE_QUEUES_V2
|
|
* VIRTCHNL_OP_DEL_QUEUES
|
|
*
|
|
* If VIRTCHNL_CAP_EXT_FEATURES was negotiated in VIRTCHNL_OP_GET_VF_RESOURCES
|
|
* then all of these ops are available.
|
|
*
|
|
* If VIRTCHNL_VF_LARGE_NUM_QPAIRS was negotiated in VIRTCHNL_OP_GET_VF_RESOURCES
|
|
* then VIRTCHNL_OP_ENABLE_QUEUES_V2 and VIRTCHNL_OP_DISABLE_QUEUES_V2 are
|
|
* available.
|
|
*
|
|
* PF sends these messages to enable, disable or delete queues specified in
|
|
* chunks. PF sends virtchnl_del_ena_dis_queues struct to specify the queues
|
|
* to be enabled/disabled/deleted. Also applicable to single queue RX or
|
|
* TX. CP performs requested action and returns status.
|
|
*/
|
|
struct virtchnl_del_ena_dis_queues {
|
|
u16 vport_id;
|
|
u16 pad;
|
|
struct virtchnl_queue_chunks chunks;
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_del_ena_dis_queues);
|
|
|
|
/* Virtchannel interrupt throttling rate index */
|
|
enum virtchnl_itr_idx {
|
|
VIRTCHNL_ITR_IDX_0 = 0,
|
|
VIRTCHNL_ITR_IDX_1 = 1,
|
|
VIRTCHNL_ITR_IDX_NO_ITR = 3,
|
|
};
|
|
|
|
/* Queue to vector mapping */
|
|
struct virtchnl_queue_vector {
|
|
u16 queue_id;
|
|
u16 vector_id;
|
|
u8 pad[4];
|
|
|
|
/* see enum virtchnl_itr_idx */
|
|
s32 itr_idx;
|
|
|
|
/* see enum virtchnl_queue_type */
|
|
s32 queue_type;
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_queue_vector);
|
|
|
|
/* VIRTCHNL_OP_MAP_QUEUE_VECTOR
|
|
* VIRTCHNL_OP_UNMAP_QUEUE_VECTOR
|
|
*
|
|
* If VIRTCHNL_CAP_EXT_FEATURES was negotiated in VIRTCHNL_OP_GET_VF_RESOURCES
|
|
* then all of these ops are available.
|
|
*
|
|
* If VIRTCHNL_VF_LARGE_NUM_QPAIRS was negotiated in VIRTCHNL_OP_GET_VF_RESOURCES
|
|
* then only VIRTCHNL_OP_MAP_QUEUE_VECTOR is available.
|
|
*
|
|
* PF sends this message to map or unmap queues to vectors and ITR index
|
|
* registers. External data buffer contains virtchnl_queue_vector_maps structure
|
|
* that contains num_qv_maps of virtchnl_queue_vector structures.
|
|
* CP maps the requested queue vector maps after validating the queue and vector
|
|
* ids and returns a status code.
|
|
*/
|
|
struct virtchnl_queue_vector_maps {
|
|
u16 vport_id;
|
|
u16 num_qv_maps;
|
|
u8 pad[4];
|
|
struct virtchnl_queue_vector qv_maps[1];
|
|
};
|
|
|
|
VIRTCHNL_CHECK_STRUCT_LEN(24, virtchnl_queue_vector_maps);
|
|
|
|
|
|
/* Since VF messages are limited by u16 size, precalculate the maximum possible
|
|
* values of nested elements in virtchnl structures that virtual channel can
|
|
* possibly handle in a single message.
|
|
*/
|
|
enum virtchnl_vector_limits {
|
|
VIRTCHNL_OP_CONFIG_VSI_QUEUES_MAX =
|
|
((u16)(~0) - sizeof(struct virtchnl_vsi_queue_config_info)) /
|
|
sizeof(struct virtchnl_queue_pair_info),
|
|
|
|
VIRTCHNL_OP_CONFIG_IRQ_MAP_MAX =
|
|
((u16)(~0) - sizeof(struct virtchnl_irq_map_info)) /
|
|
sizeof(struct virtchnl_vector_map),
|
|
|
|
VIRTCHNL_OP_ADD_DEL_ETH_ADDR_MAX =
|
|
((u16)(~0) - sizeof(struct virtchnl_ether_addr_list)) /
|
|
sizeof(struct virtchnl_ether_addr),
|
|
|
|
VIRTCHNL_OP_ADD_DEL_VLAN_MAX =
|
|
((u16)(~0) - sizeof(struct virtchnl_vlan_filter_list)) /
|
|
sizeof(u16),
|
|
|
|
|
|
VIRTCHNL_OP_ENABLE_CHANNELS_MAX =
|
|
((u16)(~0) - sizeof(struct virtchnl_tc_info)) /
|
|
sizeof(struct virtchnl_channel_info),
|
|
|
|
VIRTCHNL_OP_ENABLE_DISABLE_DEL_QUEUES_V2_MAX =
|
|
((u16)(~0) - sizeof(struct virtchnl_del_ena_dis_queues)) /
|
|
sizeof(struct virtchnl_queue_chunk),
|
|
|
|
VIRTCHNL_OP_MAP_UNMAP_QUEUE_VECTOR_MAX =
|
|
((u16)(~0) - sizeof(struct virtchnl_queue_vector_maps)) /
|
|
sizeof(struct virtchnl_queue_vector),
|
|
|
|
VIRTCHNL_OP_ADD_DEL_VLAN_V2_MAX =
|
|
((u16)(~0) - sizeof(struct virtchnl_vlan_filter_list_v2)) /
|
|
sizeof(struct virtchnl_vlan_filter),
|
|
};
|
|
|
|
/**
|
|
* virtchnl_vc_validate_vf_msg
|
|
* @ver: Virtchnl version info
|
|
* @v_opcode: Opcode for the message
|
|
* @msg: pointer to the msg buffer
|
|
* @msglen: msg length
|
|
*
|
|
* validate msg format against struct for each opcode
|
|
*/
|
|
static inline int
|
|
virtchnl_vc_validate_vf_msg(struct virtchnl_version_info *ver, u32 v_opcode,
|
|
u8 *msg, u16 msglen)
|
|
{
|
|
bool err_msg_format = false;
|
|
u32 valid_len = 0;
|
|
|
|
/* Validate message length. */
|
|
switch (v_opcode) {
|
|
case VIRTCHNL_OP_VERSION:
|
|
valid_len = sizeof(struct virtchnl_version_info);
|
|
break;
|
|
case VIRTCHNL_OP_RESET_VF:
|
|
break;
|
|
case VIRTCHNL_OP_GET_VF_RESOURCES:
|
|
if (VF_IS_V11(ver))
|
|
valid_len = sizeof(u32);
|
|
break;
|
|
case VIRTCHNL_OP_CONFIG_TX_QUEUE:
|
|
valid_len = sizeof(struct virtchnl_txq_info);
|
|
break;
|
|
case VIRTCHNL_OP_CONFIG_RX_QUEUE:
|
|
valid_len = sizeof(struct virtchnl_rxq_info);
|
|
break;
|
|
case VIRTCHNL_OP_CONFIG_VSI_QUEUES:
|
|
valid_len = sizeof(struct virtchnl_vsi_queue_config_info);
|
|
if (msglen >= valid_len) {
|
|
struct virtchnl_vsi_queue_config_info *vqc =
|
|
(struct virtchnl_vsi_queue_config_info *)msg;
|
|
|
|
if (vqc->num_queue_pairs == 0 || vqc->num_queue_pairs >
|
|
VIRTCHNL_OP_CONFIG_VSI_QUEUES_MAX) {
|
|
err_msg_format = true;
|
|
break;
|
|
}
|
|
|
|
valid_len += (vqc->num_queue_pairs *
|
|
sizeof(struct
|
|
virtchnl_queue_pair_info));
|
|
}
|
|
break;
|
|
case VIRTCHNL_OP_CONFIG_IRQ_MAP:
|
|
valid_len = sizeof(struct virtchnl_irq_map_info);
|
|
if (msglen >= valid_len) {
|
|
struct virtchnl_irq_map_info *vimi =
|
|
(struct virtchnl_irq_map_info *)msg;
|
|
|
|
if (vimi->num_vectors == 0 || vimi->num_vectors >
|
|
VIRTCHNL_OP_CONFIG_IRQ_MAP_MAX) {
|
|
err_msg_format = true;
|
|
break;
|
|
}
|
|
|
|
valid_len += (vimi->num_vectors *
|
|
sizeof(struct virtchnl_vector_map));
|
|
}
|
|
break;
|
|
case VIRTCHNL_OP_ENABLE_QUEUES:
|
|
case VIRTCHNL_OP_DISABLE_QUEUES:
|
|
valid_len = sizeof(struct virtchnl_queue_select);
|
|
break;
|
|
case VIRTCHNL_OP_GET_MAX_RSS_QREGION:
|
|
break;
|
|
case VIRTCHNL_OP_ADD_ETH_ADDR:
|
|
case VIRTCHNL_OP_DEL_ETH_ADDR:
|
|
valid_len = sizeof(struct virtchnl_ether_addr_list);
|
|
if (msglen >= valid_len) {
|
|
struct virtchnl_ether_addr_list *veal =
|
|
(struct virtchnl_ether_addr_list *)msg;
|
|
|
|
if (veal->num_elements == 0 || veal->num_elements >
|
|
VIRTCHNL_OP_ADD_DEL_ETH_ADDR_MAX) {
|
|
err_msg_format = true;
|
|
break;
|
|
}
|
|
|
|
valid_len += veal->num_elements *
|
|
sizeof(struct virtchnl_ether_addr);
|
|
}
|
|
break;
|
|
case VIRTCHNL_OP_ADD_VLAN:
|
|
case VIRTCHNL_OP_DEL_VLAN:
|
|
valid_len = sizeof(struct virtchnl_vlan_filter_list);
|
|
if (msglen >= valid_len) {
|
|
struct virtchnl_vlan_filter_list *vfl =
|
|
(struct virtchnl_vlan_filter_list *)msg;
|
|
|
|
if (vfl->num_elements == 0 || vfl->num_elements >
|
|
VIRTCHNL_OP_ADD_DEL_VLAN_MAX) {
|
|
err_msg_format = true;
|
|
break;
|
|
}
|
|
|
|
valid_len += vfl->num_elements * sizeof(u16);
|
|
}
|
|
break;
|
|
case VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE:
|
|
valid_len = sizeof(struct virtchnl_promisc_info);
|
|
break;
|
|
case VIRTCHNL_OP_GET_STATS:
|
|
valid_len = sizeof(struct virtchnl_queue_select);
|
|
break;
|
|
case VIRTCHNL_OP_CONFIG_RSS_KEY:
|
|
valid_len = sizeof(struct virtchnl_rss_key);
|
|
if (msglen >= valid_len) {
|
|
struct virtchnl_rss_key *vrk =
|
|
(struct virtchnl_rss_key *)msg;
|
|
|
|
if (vrk->key_len == 0) {
|
|
/* zero length is allowed as input */
|
|
break;
|
|
}
|
|
|
|
valid_len += vrk->key_len - 1;
|
|
}
|
|
break;
|
|
case VIRTCHNL_OP_CONFIG_RSS_LUT:
|
|
valid_len = sizeof(struct virtchnl_rss_lut);
|
|
if (msglen >= valid_len) {
|
|
struct virtchnl_rss_lut *vrl =
|
|
(struct virtchnl_rss_lut *)msg;
|
|
|
|
if (vrl->lut_entries == 0) {
|
|
/* zero entries is allowed as input */
|
|
break;
|
|
}
|
|
|
|
valid_len += vrl->lut_entries - 1;
|
|
}
|
|
break;
|
|
case VIRTCHNL_OP_GET_RSS_HENA_CAPS:
|
|
break;
|
|
case VIRTCHNL_OP_SET_RSS_HENA:
|
|
valid_len = sizeof(struct virtchnl_rss_hena);
|
|
break;
|
|
case VIRTCHNL_OP_ENABLE_VLAN_STRIPPING:
|
|
case VIRTCHNL_OP_DISABLE_VLAN_STRIPPING:
|
|
break;
|
|
case VIRTCHNL_OP_REQUEST_QUEUES:
|
|
valid_len = sizeof(struct virtchnl_vf_res_request);
|
|
break;
|
|
case VIRTCHNL_OP_ENABLE_CHANNELS:
|
|
valid_len = sizeof(struct virtchnl_tc_info);
|
|
if (msglen >= valid_len) {
|
|
struct virtchnl_tc_info *vti =
|
|
(struct virtchnl_tc_info *)msg;
|
|
|
|
if (vti->num_tc == 0 || vti->num_tc >
|
|
VIRTCHNL_OP_ENABLE_CHANNELS_MAX) {
|
|
err_msg_format = true;
|
|
break;
|
|
}
|
|
|
|
valid_len += (vti->num_tc - 1) *
|
|
sizeof(struct virtchnl_channel_info);
|
|
}
|
|
break;
|
|
case VIRTCHNL_OP_DISABLE_CHANNELS:
|
|
break;
|
|
case VIRTCHNL_OP_ADD_CLOUD_FILTER:
|
|
case VIRTCHNL_OP_DEL_CLOUD_FILTER:
|
|
valid_len = sizeof(struct virtchnl_filter);
|
|
break;
|
|
case VIRTCHNL_OP_DCF_VLAN_OFFLOAD:
|
|
valid_len = sizeof(struct virtchnl_dcf_vlan_offload);
|
|
break;
|
|
case VIRTCHNL_OP_DCF_CMD_DESC:
|
|
case VIRTCHNL_OP_DCF_CMD_BUFF:
|
|
/* These two opcodes are specific to handle the AdminQ command,
|
|
* so the validation needs to be done in PF's context.
|
|
*/
|
|
valid_len = msglen;
|
|
break;
|
|
case VIRTCHNL_OP_DCF_DISABLE:
|
|
case VIRTCHNL_OP_DCF_GET_VSI_MAP:
|
|
case VIRTCHNL_OP_DCF_GET_PKG_INFO:
|
|
break;
|
|
case VIRTCHNL_OP_GET_SUPPORTED_RXDIDS:
|
|
break;
|
|
case VIRTCHNL_OP_ADD_RSS_CFG:
|
|
case VIRTCHNL_OP_DEL_RSS_CFG:
|
|
valid_len = sizeof(struct virtchnl_rss_cfg);
|
|
break;
|
|
case VIRTCHNL_OP_ADD_FDIR_FILTER:
|
|
valid_len = sizeof(struct virtchnl_fdir_add);
|
|
break;
|
|
case VIRTCHNL_OP_DEL_FDIR_FILTER:
|
|
valid_len = sizeof(struct virtchnl_fdir_del);
|
|
break;
|
|
case VIRTCHNL_OP_QUERY_FDIR_FILTER:
|
|
valid_len = sizeof(struct virtchnl_fdir_query);
|
|
break;
|
|
case VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS:
|
|
break;
|
|
case VIRTCHNL_OP_ADD_VLAN_V2:
|
|
case VIRTCHNL_OP_DEL_VLAN_V2:
|
|
valid_len = sizeof(struct virtchnl_vlan_filter_list_v2);
|
|
if (msglen >= valid_len) {
|
|
struct virtchnl_vlan_filter_list_v2 *vfl =
|
|
(struct virtchnl_vlan_filter_list_v2 *)msg;
|
|
|
|
if (vfl->num_elements == 0 || vfl->num_elements >
|
|
VIRTCHNL_OP_ADD_DEL_VLAN_V2_MAX) {
|
|
err_msg_format = true;
|
|
break;
|
|
}
|
|
|
|
valid_len += (vfl->num_elements - 1) *
|
|
sizeof(struct virtchnl_vlan_filter);
|
|
}
|
|
break;
|
|
case VIRTCHNL_OP_ENABLE_VLAN_STRIPPING_V2:
|
|
case VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2:
|
|
case VIRTCHNL_OP_ENABLE_VLAN_INSERTION_V2:
|
|
case VIRTCHNL_OP_DISABLE_VLAN_INSERTION_V2:
|
|
case VIRTCHNL_OP_ENABLE_VLAN_FILTERING_V2:
|
|
case VIRTCHNL_OP_DISABLE_VLAN_FILTERING_V2:
|
|
valid_len = sizeof(struct virtchnl_vlan_setting);
|
|
break;
|
|
case VIRTCHNL_OP_ENABLE_QUEUES_V2:
|
|
case VIRTCHNL_OP_DISABLE_QUEUES_V2:
|
|
valid_len = sizeof(struct virtchnl_del_ena_dis_queues);
|
|
if (msglen >= valid_len) {
|
|
struct virtchnl_del_ena_dis_queues *qs =
|
|
(struct virtchnl_del_ena_dis_queues *)msg;
|
|
if (qs->chunks.num_chunks == 0 ||
|
|
qs->chunks.num_chunks > VIRTCHNL_OP_ENABLE_DISABLE_DEL_QUEUES_V2_MAX) {
|
|
err_msg_format = true;
|
|
break;
|
|
}
|
|
valid_len += (qs->chunks.num_chunks - 1) *
|
|
sizeof(struct virtchnl_queue_chunk);
|
|
}
|
|
break;
|
|
case VIRTCHNL_OP_MAP_QUEUE_VECTOR:
|
|
valid_len = sizeof(struct virtchnl_queue_vector_maps);
|
|
if (msglen >= valid_len) {
|
|
struct virtchnl_queue_vector_maps *v_qp =
|
|
(struct virtchnl_queue_vector_maps *)msg;
|
|
if (v_qp->num_qv_maps == 0 ||
|
|
v_qp->num_qv_maps > VIRTCHNL_OP_MAP_UNMAP_QUEUE_VECTOR_MAX) {
|
|
err_msg_format = true;
|
|
break;
|
|
}
|
|
valid_len += (v_qp->num_qv_maps - 1) *
|
|
sizeof(struct virtchnl_queue_vector);
|
|
}
|
|
break;
|
|
/* These are always errors coming from the VF. */
|
|
case VIRTCHNL_OP_EVENT:
|
|
case VIRTCHNL_OP_UNKNOWN:
|
|
default:
|
|
return VIRTCHNL_STATUS_ERR_PARAM;
|
|
}
|
|
/* few more checks */
|
|
if (err_msg_format || valid_len != msglen)
|
|
return VIRTCHNL_STATUS_ERR_OPCODE_MISMATCH;
|
|
|
|
return 0;
|
|
}
|
|
#endif /* _VIRTCHNL_H_ */
|