35b2d13fd6
Add 'RTE_' prefix to defines: - rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN. - rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN. - rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN. - rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN. - rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN. - rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN. - rename ETHER_MTU as RTE_ETHER_MTU. - rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN. - rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID. - rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN. - rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU. - rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR. - rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR. - rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4. - rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6. - rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP. - rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN. - rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP. - rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ. - rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG. - rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588. - rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW. - rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB. - rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP. - rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS. - rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM. - rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN. - rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE. - rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4. - rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6. - rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH. - rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH. - rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS. - rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP. - rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG. - rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN. Do not update the command line library to avoid adding a dependency to librte_net. Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
172 lines
5.6 KiB
ReStructuredText
172 lines
5.6 KiB
ReStructuredText
.. SPDX-License-Identifier: BSD-3-Clause
|
|
Copyright(c) 2017 Intel Corporation.
|
|
|
|
KNI Poll Mode Driver
|
|
======================
|
|
|
|
KNI PMD is wrapper to the :ref:`librte_kni <kni>` library.
|
|
|
|
This PMD enables using KNI without having a KNI specific application,
|
|
any forwarding application can use PMD interface for KNI.
|
|
|
|
Sending packets to any DPDK controlled interface or sending to the
|
|
Linux networking stack will be transparent to the DPDK application.
|
|
|
|
To create a KNI device ``net_kni#`` device name should be used, and this
|
|
will create ``kni#`` Linux virtual network interface.
|
|
|
|
There is no physical device backend for the virtual KNI device.
|
|
|
|
Packets sent to the KNI Linux interface will be received by the DPDK
|
|
application, and DPDK application may forward packets to a physical NIC
|
|
or to a virtual device (like another KNI interface or PCAP interface).
|
|
|
|
To forward any traffic from physical NIC to the Linux networking stack,
|
|
an application should control a physical port and create one virtual KNI port,
|
|
and forward between two.
|
|
|
|
Using this PMD requires KNI kernel module be inserted.
|
|
|
|
|
|
Usage
|
|
-----
|
|
|
|
EAL ``--vdev`` argument can be used to create KNI device instance, like::
|
|
|
|
testpmd --vdev=net_kni0 --vdev=net_kn1 -- -i
|
|
|
|
Above command will create ``kni0`` and ``kni1`` Linux network interfaces,
|
|
those interfaces can be controlled by standard Linux tools.
|
|
|
|
When testpmd forwarding starts, any packets sent to ``kni0`` interface
|
|
forwarded to the ``kni1`` interface and vice versa.
|
|
|
|
There is no hard limit on number of interfaces that can be created.
|
|
|
|
|
|
Default interface configuration
|
|
-------------------------------
|
|
|
|
``librte_kni`` can create Linux network interfaces with different features,
|
|
feature set controlled by a configuration struct, and KNI PMD uses a fixed
|
|
configuration:
|
|
|
|
.. code-block:: console
|
|
|
|
Interface name: kni#
|
|
force bind kernel thread to a core : NO
|
|
mbuf size: (rte_pktmbuf_data_room_size(pktmbuf_pool) - RTE_PKTMBUF_HEADROOM)
|
|
mtu: (conf.mbuf_size - RTE_ETHER_HDR_LEN)
|
|
|
|
KNI control path is not supported with the PMD, since there is no physical
|
|
backend device by default.
|
|
|
|
|
|
PMD arguments
|
|
-------------
|
|
|
|
``no_request_thread``, by default PMD creates a pthread for each KNI interface
|
|
to handle Linux network interface control commands, like ``ifconfig kni0 up``
|
|
|
|
With ``no_request_thread`` option, pthread is not created and control commands
|
|
not handled by PMD.
|
|
|
|
By default request thread is enabled. And this argument should not be used
|
|
most of the time, unless this PMD used with customized DPDK application to handle
|
|
requests itself.
|
|
|
|
Argument usage::
|
|
|
|
testpmd --vdev "net_kni0,no_request_thread=1" -- -i
|
|
|
|
|
|
PMD log messages
|
|
----------------
|
|
|
|
If KNI kernel module (rte_kni.ko) not inserted, following error log printed::
|
|
|
|
"KNI: KNI subsystem has not been initialized. Invoke rte_kni_init() first"
|
|
|
|
|
|
PMD testing
|
|
-----------
|
|
|
|
It is possible to test PMD quickly using KNI kernel module loopback feature:
|
|
|
|
* Insert KNI kernel module with loopback support:
|
|
|
|
.. code-block:: console
|
|
|
|
insmod build/kmod/rte_kni.ko lo_mode=lo_mode_fifo_skb
|
|
|
|
* Start testpmd with no physical device but two KNI virtual devices:
|
|
|
|
.. code-block:: console
|
|
|
|
./testpmd --vdev net_kni0 --vdev net_kni1 -- -i
|
|
|
|
.. code-block:: console
|
|
|
|
...
|
|
Configuring Port 0 (socket 0)
|
|
KNI: pci: 00:00:00 c580:b8
|
|
Port 0: 1A:4A:5B:7C:A2:8C
|
|
Configuring Port 1 (socket 0)
|
|
KNI: pci: 00:00:00 600:b9
|
|
Port 1: AE:95:21:07:93:DD
|
|
Checking link statuses...
|
|
Port 0 Link Up - speed 10000 Mbps - full-duplex
|
|
Port 1 Link Up - speed 10000 Mbps - full-duplex
|
|
Done
|
|
testpmd>
|
|
|
|
* Observe Linux interfaces
|
|
|
|
.. code-block:: console
|
|
|
|
$ ifconfig kni0 && ifconfig kni1
|
|
kni0: flags=4098<BROADCAST,MULTICAST> mtu 1500
|
|
ether ae:8e:79:8e:9b:c8 txqueuelen 1000 (Ethernet)
|
|
RX packets 0 bytes 0 (0.0 B)
|
|
RX errors 0 dropped 0 overruns 0 frame 0
|
|
TX packets 0 bytes 0 (0.0 B)
|
|
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
|
|
|
|
kni1: flags=4098<BROADCAST,MULTICAST> mtu 1500
|
|
ether 9e:76:43:53:3e:9b txqueuelen 1000 (Ethernet)
|
|
RX packets 0 bytes 0 (0.0 B)
|
|
RX errors 0 dropped 0 overruns 0 frame 0
|
|
TX packets 0 bytes 0 (0.0 B)
|
|
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
|
|
|
|
|
|
* Start forwarding with tx_first:
|
|
|
|
.. code-block:: console
|
|
|
|
testpmd> start tx_first
|
|
|
|
* Quit and check forwarding stats:
|
|
|
|
.. code-block:: console
|
|
|
|
testpmd> quit
|
|
Telling cores to stop...
|
|
Waiting for lcores to finish...
|
|
|
|
---------------------- Forward statistics for port 0 ----------------------
|
|
RX-packets: 35637905 RX-dropped: 0 RX-total: 35637905
|
|
TX-packets: 35637947 TX-dropped: 0 TX-total: 35637947
|
|
----------------------------------------------------------------------------
|
|
|
|
---------------------- Forward statistics for port 1 ----------------------
|
|
RX-packets: 35637915 RX-dropped: 0 RX-total: 35637915
|
|
TX-packets: 35637937 TX-dropped: 0 TX-total: 35637937
|
|
----------------------------------------------------------------------------
|
|
|
|
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
|
|
RX-packets: 71275820 RX-dropped: 0 RX-total: 71275820
|
|
TX-packets: 71275884 TX-dropped: 0 TX-total: 71275884
|
|
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
|