numam-dpdk/mk/rte.app.mk
Hemant Agrawal 09e1e8d256 mk: fix dependencies of dpaaX drivers
This  patch fixes the build dependency of various
dpaaX components, when the dpaa or fslmc bus is disabled,
or VFIO is disabled.

Fixes: 1ee9569576 ("config: enable dpaaX drivers for generic ARMv8")
Cc: stable@dpdk.org

Reported-by: Yongseok Koh <yskoh@mellanox.com>
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
2018-03-14 00:37:42 +01:00

399 lines
16 KiB
Makefile

# BSD LICENSE
#
# Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
# Copyright(c) 2014-2015 6WIND S.A.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# * Neither the name of Intel Corporation nor the names of its
# contributors may be used to endorse or promote products derived
# from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
include $(RTE_SDK)/mk/internal/rte.compile-pre.mk
include $(RTE_SDK)/mk/internal/rte.install-pre.mk
include $(RTE_SDK)/mk/internal/rte.clean-pre.mk
include $(RTE_SDK)/mk/internal/rte.build-pre.mk
# VPATH contains at least SRCDIR
VPATH += $(SRCDIR)
_BUILD = $(APP)
_INSTALL = $(INSTALL-FILES-y) $(SYMLINK-FILES-y)
_INSTALL += $(RTE_OUTPUT)/app/$(APP) $(RTE_OUTPUT)/app/$(APP).map
POSTINSTALL += target-appinstall
_CLEAN = doclean
POSTCLEAN += target-appclean
ifeq ($(NO_LDSCRIPT),)
LDSCRIPT = $(RTE_LDSCRIPT)
endif
# Link only the libraries used in the application
LDFLAGS += --as-needed
# default path for libs
_LDLIBS-y += -L$(RTE_SDK_BIN)/lib
#
# Order is important: from higher level to lower level
#
_LDLIBS-$(CONFIG_RTE_LIBRTE_FLOW_CLASSIFY) += -lrte_flow_classify
_LDLIBS-$(CONFIG_RTE_LIBRTE_PIPELINE) += -lrte_pipeline
_LDLIBS-$(CONFIG_RTE_LIBRTE_TABLE) += -lrte_table
_LDLIBS-$(CONFIG_RTE_LIBRTE_PORT) += -lrte_port
_LDLIBS-$(CONFIG_RTE_LIBRTE_PDUMP) += -lrte_pdump
_LDLIBS-$(CONFIG_RTE_LIBRTE_DISTRIBUTOR) += -lrte_distributor
_LDLIBS-$(CONFIG_RTE_LIBRTE_IP_FRAG) += -lrte_ip_frag
_LDLIBS-$(CONFIG_RTE_LIBRTE_GRO) += -lrte_gro
_LDLIBS-$(CONFIG_RTE_LIBRTE_GSO) += -lrte_gso
_LDLIBS-$(CONFIG_RTE_LIBRTE_METER) += -lrte_meter
_LDLIBS-$(CONFIG_RTE_LIBRTE_LPM) += -lrte_lpm
# librte_acl needs --whole-archive because of weak functions
_LDLIBS-$(CONFIG_RTE_LIBRTE_ACL) += --whole-archive
_LDLIBS-$(CONFIG_RTE_LIBRTE_ACL) += -lrte_acl
_LDLIBS-$(CONFIG_RTE_LIBRTE_ACL) += --no-whole-archive
_LDLIBS-$(CONFIG_RTE_LIBRTE_JOBSTATS) += -lrte_jobstats
_LDLIBS-$(CONFIG_RTE_LIBRTE_METRICS) += -lrte_metrics
_LDLIBS-$(CONFIG_RTE_LIBRTE_BITRATE) += -lrte_bitratestats
_LDLIBS-$(CONFIG_RTE_LIBRTE_LATENCY_STATS) += -lrte_latencystats
_LDLIBS-$(CONFIG_RTE_LIBRTE_POWER) += -lrte_power
_LDLIBS-$(CONFIG_RTE_LIBRTE_TIMER) += -lrte_timer
_LDLIBS-$(CONFIG_RTE_LIBRTE_EFD) += -lrte_efd
_LDLIBS-y += --whole-archive
_LDLIBS-$(CONFIG_RTE_LIBRTE_CFGFILE) += -lrte_cfgfile
_LDLIBS-$(CONFIG_RTE_LIBRTE_HASH) += -lrte_hash
_LDLIBS-$(CONFIG_RTE_LIBRTE_MEMBER) += -lrte_member
_LDLIBS-$(CONFIG_RTE_LIBRTE_VHOST) += -lrte_vhost
_LDLIBS-$(CONFIG_RTE_LIBRTE_KVARGS) += -lrte_kvargs
_LDLIBS-$(CONFIG_RTE_LIBRTE_MBUF) += -lrte_mbuf
_LDLIBS-$(CONFIG_RTE_LIBRTE_NET) += -lrte_net
_LDLIBS-$(CONFIG_RTE_LIBRTE_ETHER) += -lrte_ethdev
_LDLIBS-$(CONFIG_RTE_LIBRTE_BBDEV) += -lrte_bbdev
_LDLIBS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += -lrte_cryptodev
_LDLIBS-$(CONFIG_RTE_LIBRTE_SECURITY) += -lrte_security
_LDLIBS-$(CONFIG_RTE_LIBRTE_EVENTDEV) += -lrte_eventdev
_LDLIBS-$(CONFIG_RTE_LIBRTE_RAWDEV) += -lrte_rawdev
_LDLIBS-$(CONFIG_RTE_LIBRTE_MEMPOOL) += -lrte_mempool
_LDLIBS-$(CONFIG_RTE_DRIVER_MEMPOOL_RING) += -lrte_mempool_ring
_LDLIBS-$(CONFIG_RTE_LIBRTE_RING) += -lrte_ring
_LDLIBS-$(CONFIG_RTE_LIBRTE_PCI) += -lrte_pci
_LDLIBS-$(CONFIG_RTE_LIBRTE_EAL) += -lrte_eal
_LDLIBS-$(CONFIG_RTE_LIBRTE_CMDLINE) += -lrte_cmdline
_LDLIBS-$(CONFIG_RTE_LIBRTE_REORDER) += -lrte_reorder
_LDLIBS-$(CONFIG_RTE_LIBRTE_SCHED) += -lrte_sched
ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
_LDLIBS-$(CONFIG_RTE_LIBRTE_KNI) += -lrte_kni
endif
_LDLIBS-$(CONFIG_RTE_LIBRTE_PCI_BUS) += -lrte_bus_pci
_LDLIBS-$(CONFIG_RTE_LIBRTE_VDEV_BUS) += -lrte_bus_vdev
_LDLIBS-$(CONFIG_RTE_LIBRTE_DPAA_BUS) += -lrte_bus_dpaa
ifeq ($(CONFIG_RTE_EAL_VFIO),y)
_LDLIBS-$(CONFIG_RTE_LIBRTE_FSLMC_BUS) += -lrte_bus_fslmc
endif
ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),n)
# plugins (link only if static libraries)
_LDLIBS-$(CONFIG_RTE_DRIVER_MEMPOOL_STACK) += -lrte_mempool_stack
ifeq ($(CONFIG_RTE_LIBRTE_DPAA_BUS),y)
_LDLIBS-$(CONFIG_RTE_LIBRTE_DPAA_MEMPOOL) += -lrte_mempool_dpaa
endif
ifeq ($(CONFIG_RTE_EAL_VFIO)$(CONFIG_RTE_LIBRTE_FSLMC_BUS),yy)
_LDLIBS-$(CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL) += -lrte_mempool_dpaa2
endif
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AF_PACKET) += -lrte_pmd_af_packet
_LDLIBS-$(CONFIG_RTE_LIBRTE_ARK_PMD) += -lrte_pmd_ark
_LDLIBS-$(CONFIG_RTE_LIBRTE_AVF_PMD) += -lrte_pmd_avf
_LDLIBS-$(CONFIG_RTE_LIBRTE_AVP_PMD) += -lrte_pmd_avp
_LDLIBS-$(CONFIG_RTE_LIBRTE_BNX2X_PMD) += -lrte_pmd_bnx2x -lz
_LDLIBS-$(CONFIG_RTE_LIBRTE_BNXT_PMD) += -lrte_pmd_bnxt
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_BOND) += -lrte_pmd_bond
_LDLIBS-$(CONFIG_RTE_LIBRTE_CXGBE_PMD) += -lrte_pmd_cxgbe
ifeq ($(CONFIG_RTE_LIBRTE_DPAA_BUS),y)
_LDLIBS-$(CONFIG_RTE_LIBRTE_DPAA_PMD) += -lrte_pmd_dpaa
endif
ifeq ($(CONFIG_RTE_EAL_VFIO)$(CONFIG_RTE_LIBRTE_FSLMC_BUS),yy)
_LDLIBS-$(CONFIG_RTE_LIBRTE_DPAA2_PMD) += -lrte_pmd_dpaa2
endif
_LDLIBS-$(CONFIG_RTE_LIBRTE_E1000_PMD) += -lrte_pmd_e1000
_LDLIBS-$(CONFIG_RTE_LIBRTE_ENA_PMD) += -lrte_pmd_ena
_LDLIBS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += -lrte_pmd_enic
_LDLIBS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += -lrte_pmd_fm10k
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_FAILSAFE) += -lrte_pmd_failsafe
_LDLIBS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += -lrte_pmd_i40e
_LDLIBS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += -lrte_pmd_ixgbe
ifeq ($(CONFIG_RTE_LIBRTE_KNI),y)
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += -lrte_pmd_kni
endif
_LDLIBS-$(CONFIG_RTE_LIBRTE_LIO_PMD) += -lrte_pmd_lio
ifeq ($(CONFIG_RTE_LIBRTE_MLX4_DLOPEN_DEPS),y)
_LDLIBS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += -lrte_pmd_mlx4 -ldl
else
_LDLIBS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += -lrte_pmd_mlx4 -libverbs -lmlx4
endif
ifeq ($(CONFIG_RTE_LIBRTE_MLX5_DLOPEN_DEPS),y)
_LDLIBS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += -lrte_pmd_mlx5 -ldl
else
_LDLIBS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += -lrte_pmd_mlx5 -libverbs -lmlx5
endif
_LDLIBS-$(CONFIG_RTE_LIBRTE_MRVL_PMD) += -lrte_pmd_mrvl -L$(LIBMUSDK_PATH)/lib -lmusdk
_LDLIBS-$(CONFIG_RTE_LIBRTE_NFP_PMD) += -lrte_pmd_nfp
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_NULL) += -lrte_pmd_null
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_PCAP) += -lrte_pmd_pcap -lpcap
_LDLIBS-$(CONFIG_RTE_LIBRTE_QEDE_PMD) += -lrte_pmd_qede
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_RING) += -lrte_pmd_ring
ifeq ($(CONFIG_RTE_LIBRTE_SCHED),y)
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SOFTNIC) += -lrte_pmd_softnic
endif
_LDLIBS-$(CONFIG_RTE_LIBRTE_SFC_EFX_PMD) += -lrte_pmd_sfc_efx
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SZEDATA2) += -lrte_pmd_szedata2 -lsze2
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_TAP) += -lrte_pmd_tap
_LDLIBS-$(CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD) += -lrte_pmd_thunderx_nicvf
_LDLIBS-$(CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD) += -lrte_pmd_vdev_netvsc
_LDLIBS-$(CONFIG_RTE_LIBRTE_VIRTIO_PMD) += -lrte_pmd_virtio
ifeq ($(CONFIG_RTE_LIBRTE_VHOST),y)
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_VHOST) += -lrte_pmd_vhost
endif # $(CONFIG_RTE_LIBRTE_VHOST)
_LDLIBS-$(CONFIG_RTE_LIBRTE_VMXNET3_PMD) += -lrte_pmd_vmxnet3_uio
ifeq ($(CONFIG_RTE_LIBRTE_BBDEV),y)
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL) += -lrte_pmd_bbdev_null
# TURBO SOFTWARE PMD is dependent on the FLEXRAN library
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW) += -lrte_pmd_bbdev_turbo_sw
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW) += -L$(FLEXRAN_SDK)/lib_crc -lcrc
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW) += -L$(FLEXRAN_SDK)/lib_turbo -lturbo
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW) += -L$(FLEXRAN_SDK)/lib_rate_matching -lrate_matching
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW) += -L$(FLEXRAN_SDK)/lib_common -lcommon
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW) += -lirc -limf -lstdc++ -lipps
endif # CONFIG_RTE_LIBRTE_BBDEV
ifeq ($(CONFIG_RTE_LIBRTE_CRYPTODEV),y)
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_MB) += -lrte_pmd_aesni_mb
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_MB) += -L$(AESNI_MULTI_BUFFER_LIB_PATH) -lIPSec_MB
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_GCM) += -lrte_pmd_aesni_gcm
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_GCM) += -L$(AESNI_MULTI_BUFFER_LIB_PATH) -lIPSec_MB
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_OPENSSL) += -lrte_pmd_openssl -lcrypto
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO) += -lrte_pmd_null_crypto
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += -lrte_pmd_qat -lcrypto
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SNOW3G) += -lrte_pmd_snow3g
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SNOW3G) += -L$(LIBSSO_SNOW3G_PATH)/build -lsso_snow3g
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_KASUMI) += -lrte_pmd_kasumi
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_KASUMI) += -L$(LIBSSO_KASUMI_PATH)/build -lsso_kasumi
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_ZUC) += -lrte_pmd_zuc
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_ZUC) += -L$(LIBSSO_ZUC_PATH)/build -lsso_zuc
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO) += -lrte_pmd_armv8
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO) += -L$(ARMV8_CRYPTO_LIB_PATH) -larmv8_crypto
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_MRVL_CRYPTO) += -L$(LIBMUSDK_PATH)/lib -lrte_pmd_mrvl_crypto -lmusdk
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += -lrte_pmd_crypto_scheduler
ifeq ($(CONFIG_RTE_EAL_VFIO)$(CONFIG_RTE_LIBRTE_FSLMC_BUS),yy)
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC) += -lrte_pmd_dpaa2_sec
endif # CONFIG_RTE_LIBRTE_FSLMC_BUS
ifeq ($(CONFIG_RTE_LIBRTE_DPAA_BUS),y)
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_DPAA_SEC) += -lrte_pmd_dpaa_sec
endif # CONFIG_RTE_LIBRTE_DPAA_BUS
endif # CONFIG_RTE_LIBRTE_CRYPTODEV
ifeq ($(CONFIG_RTE_LIBRTE_EVENTDEV),y)
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV) += -lrte_pmd_skeleton_event
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV) += -lrte_pmd_sw_event
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF) += -lrte_pmd_octeontx_ssovf
ifeq ($(CONFIG_RTE_LIBRTE_DPAA_BUS),y)
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV) += -lrte_pmd_dpaa_event
endif # CONFIG_RTE_LIBRTE_DPAA_BUS
ifeq ($(CONFIG_RTE_EAL_VFIO)$(CONFIG_RTE_LIBRTE_FSLMC_BUS),yy)
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV) += -lrte_pmd_dpaa2_event
endif # CONFIG_RTE_LIBRTE_FSLMC_BUS
_LDLIBS-$(CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL) += -lrte_mempool_octeontx
_LDLIBS-$(CONFIG_RTE_LIBRTE_OCTEONTX_PMD) += -lrte_pmd_octeontx
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV) += -lrte_pmd_opdl_event
endif # CONFIG_RTE_LIBRTE_EVENTDEV
ifeq ($(CONFIG_RTE_LIBRTE_RAWDEV),y)
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV) += -lrte_pmd_skeleton_rawdev
endif # CONFIG_RTE_LIBRTE_RAWDEV
endif # !CONFIG_RTE_BUILD_SHARED_LIBS
_LDLIBS-y += --no-whole-archive
ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),n)
# The static libraries do not know their dependencies.
# So linking with static library requires explicit dependencies.
_LDLIBS-$(CONFIG_RTE_LIBRTE_EAL) += -lrt
ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP)$(CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES),yy)
_LDLIBS-$(CONFIG_RTE_LIBRTE_EAL) += -lnuma
endif
_LDLIBS-$(CONFIG_RTE_LIBRTE_SCHED) += -lm
_LDLIBS-$(CONFIG_RTE_LIBRTE_SCHED) += -lrt
_LDLIBS-$(CONFIG_RTE_LIBRTE_MEMBER) += -lm
_LDLIBS-$(CONFIG_RTE_LIBRTE_METER) += -lm
ifeq ($(CONFIG_RTE_LIBRTE_VHOST_NUMA),y)
_LDLIBS-$(CONFIG_RTE_LIBRTE_VHOST) += -lnuma
endif
_LDLIBS-$(CONFIG_RTE_PORT_PCAP) += -lpcap
endif # !CONFIG_RTE_BUILD_SHARED_LIBS
_LDLIBS-y += $(EXECENV_LDLIBS)
LDLIBS += $(_LDLIBS-y) $(CPU_LDLIBS) $(EXTRA_LDLIBS)
# all the words except the first one
allbutfirst = $(wordlist 2,$(words $(1)),$(1))
# Eliminate duplicates without sorting, only keep the last occurrence
filter-libs = \
$(if $(1),$(strip\
$(if \
$(and \
$(filter $(firstword $(1)),$(call allbutfirst,$(1))),\
$(filter -l%,$(firstword $(1)))),\
,\
$(firstword $(1))) \
$(call filter-libs,$(call allbutfirst,$(1)))))
LDLIBS := $(call filter-libs,$(LDLIBS))
ifeq ($(RTE_DEVEL_BUILD)$(CONFIG_RTE_BUILD_SHARED_LIB),yy)
LDFLAGS += -rpath=$(RTE_SDK_BIN)/lib
endif
MAPFLAGS = -Map=$@.map --cref
.PHONY: all
all: install
.PHONY: install
install: build _postinstall
_postinstall: build
.PHONY: build
build: _postbuild
exe2cmd = $(strip $(call dotfile,$(patsubst %,%.cmd,$(1))))
ifeq ($(LINK_USING_CC),1)
O_TO_EXE = $(CC) -o $@ $(CFLAGS) $(EXTRA_CFLAGS) $(OBJS-y) $(call linkerprefix, \
$(LDLIBS) $(LDFLAGS) $(LDFLAGS_$(@)) $(EXTRA_LDFLAGS) \
$(MAPFLAGS))
else
O_TO_EXE = $(LD) -o $@ $(OBJS-y) \
$(LDLIBS) $(LDFLAGS) $(LDFLAGS_$(@)) $(EXTRA_LDFLAGS) \
$(MAPFLAGS)
endif
O_TO_EXE_STR = $(subst ','\'',$(O_TO_EXE)) #'# fix syntax highlight
O_TO_EXE_DISP = $(if $(V),"$(O_TO_EXE_STR)"," LD $(@)")
O_TO_EXE_CMD = "cmd_$@ = $(O_TO_EXE_STR)"
O_TO_EXE_DO = @set -e; \
echo $(O_TO_EXE_DISP); \
$(O_TO_EXE) && \
echo $(O_TO_EXE_CMD) > $(call exe2cmd,$(@))
-include .$(APP).cmd
# path where libraries are retrieved
LDLIBS_PATH := $(subst -Wl$(comma)-L,,$(filter -Wl$(comma)-L%,$(LDLIBS)))
LDLIBS_PATH += $(subst -L,,$(filter -L%,$(LDLIBS)))
# list of .a files that are linked to this application
LDLIBS_NAMES := $(patsubst -l%,lib%.a,$(filter -l%,$(LDLIBS)))
LDLIBS_NAMES += $(patsubst -Wl$(comma)-l%,lib%.a,$(filter -Wl$(comma)-l%,$(LDLIBS)))
# list of found libraries files (useful for deps). If not found, the
# library is silently ignored and dep won't be checked
LDLIBS_FILES := $(sort $(wildcard $(foreach dir,$(LDLIBS_PATH),\
$(addprefix $(dir)/,$(LDLIBS_NAMES)))))
#
# Compile executable file if needed
#
$(APP): $(OBJS-y) $(LDLIBS_FILES) $(DEP_$(APP)) $(LDSCRIPT) FORCE
@[ -d $(dir $@) ] || mkdir -p $(dir $@)
$(if $(D),\
@echo -n "$< -> $@ " ; \
echo -n "file_missing=$(call boolean,$(file_missing)) " ; \
echo -n "cmdline_changed=$(call boolean,$(call cmdline_changed,$(O_TO_EXE_STR))) " ; \
echo -n "depfile_missing=$(call boolean,$(depfile_missing)) " ; \
echo "depfile_newer=$(call boolean,$(depfile_newer)) ")
$(if $(or \
$(file_missing),\
$(call cmdline_changed,$(O_TO_EXE_STR)),\
$(depfile_missing),\
$(depfile_newer)),\
$(O_TO_EXE_DO))
#
# install app in $(RTE_OUTPUT)/app
#
$(RTE_OUTPUT)/app/$(APP): $(APP)
@echo " INSTALL-APP $(APP)"
@[ -d $(RTE_OUTPUT)/app ] || mkdir -p $(RTE_OUTPUT)/app
$(Q)cp -f $(APP) $(RTE_OUTPUT)/app
#
# install app map file in $(RTE_OUTPUT)/app
#
$(RTE_OUTPUT)/app/$(APP).map: $(APP)
@echo " INSTALL-MAP $(APP).map"
@[ -d $(RTE_OUTPUT)/app ] || mkdir -p $(RTE_OUTPUT)/app
$(Q)cp -f $(APP).map $(RTE_OUTPUT)/app
#
# Clean all generated files
#
.PHONY: clean
clean: _postclean
$(Q)rm -f $(_BUILD_TARGETS) $(_INSTALL_TARGETS) $(_CLEAN_TARGETS)
.PHONY: doclean
doclean:
$(Q)rm -rf $(APP) $(OBJS-all) $(DEPS-all) $(DEPSTMP-all) \
$(CMDS-all) $(INSTALL-FILES-all) .$(APP).cmd $(APP).map
include $(RTE_SDK)/mk/internal/rte.compile-post.mk
include $(RTE_SDK)/mk/internal/rte.install-post.mk
include $(RTE_SDK)/mk/internal/rte.clean-post.mk
include $(RTE_SDK)/mk/internal/rte.build-post.mk
ifneq ($(wildcard $(RTE_SDK)/mk/target/$(RTE_TARGET)/rte.app.mk),)
include $(RTE_SDK)/mk/target/$(RTE_TARGET)/rte.app.mk
else
include $(RTE_SDK)/mk/target/generic/rte.app.mk
endif
.PHONY: FORCE
FORCE: