numam-dpdk/app/test-pipeline/init.c
Stephen Hemminger 6f41fe75e2 eal: deprecate rte_snprintf
The function rte_snprintf serves no useful purpose. It is the
same as snprintf() for all valid inputs. Deprecate it and
replace all uses in current code.

Leave the tests for the deprecated function in place.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-06-27 02:31:24 +02:00

296 lines
6.8 KiB
C

/*-
* BSD LICENSE
*
* Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <inttypes.h>
#include <sys/types.h>
#include <string.h>
#include <sys/queue.h>
#include <stdarg.h>
#include <errno.h>
#include <getopt.h>
#include <rte_common.h>
#include <rte_byteorder.h>
#include <rte_log.h>
#include <rte_memory.h>
#include <rte_memcpy.h>
#include <rte_memzone.h>
#include <rte_tailq.h>
#include <rte_eal.h>
#include <rte_per_lcore.h>
#include <rte_launch.h>
#include <rte_atomic.h>
#include <rte_cycles.h>
#include <rte_prefetch.h>
#include <rte_lcore.h>
#include <rte_per_lcore.h>
#include <rte_branch_prediction.h>
#include <rte_interrupts.h>
#include <rte_pci.h>
#include <rte_random.h>
#include <rte_debug.h>
#include <rte_ether.h>
#include <rte_ethdev.h>
#include <rte_ring.h>
#include <rte_mempool.h>
#include <rte_mbuf.h>
#include <rte_string_fns.h>
#include <rte_ip.h>
#include <rte_tcp.h>
#include <rte_lpm.h>
#include <rte_lpm6.h>
#include "main.h"
struct app_params app = {
/* Ports*/
.n_ports = APP_MAX_PORTS,
.port_rx_ring_size = 128,
.port_tx_ring_size = 512,
/* Rings */
.ring_rx_size = 128,
.ring_tx_size = 128,
/* Buffer pool */
.pool_buffer_size = 2048 + sizeof(struct rte_mbuf) +
RTE_PKTMBUF_HEADROOM,
.pool_size = 32 * 1024,
.pool_cache_size = 256,
/* Burst sizes */
.burst_size_rx_read = 64,
.burst_size_rx_write = 64,
.burst_size_worker_read = 64,
.burst_size_worker_write = 64,
.burst_size_tx_read = 64,
.burst_size_tx_write = 64,
};
static struct rte_eth_conf port_conf = {
.rxmode = {
.split_hdr_size = 0,
.header_split = 0, /* Header Split disabled */
.hw_ip_checksum = 1, /* IP checksum offload enabled */
.hw_vlan_filter = 0, /* VLAN filtering disabled */
.jumbo_frame = 0, /* Jumbo Frame Support disabled */
.hw_strip_crc = 0, /* CRC stripped by hardware */
},
.rx_adv_conf = {
.rss_conf = {
.rss_key = NULL,
.rss_hf = ETH_RSS_IPV4 | ETH_RSS_IPV6,
},
},
.txmode = {
.mq_mode = ETH_MQ_TX_NONE,
},
};
static struct rte_eth_rxconf rx_conf = {
.rx_thresh = {
.pthresh = 8,
.hthresh = 8,
.wthresh = 4,
},
.rx_free_thresh = 64,
.rx_drop_en = 0,
};
static struct rte_eth_txconf tx_conf = {
.tx_thresh = {
.pthresh = 36,
.hthresh = 0,
.wthresh = 0,
},
.tx_free_thresh = 0,
.tx_rs_thresh = 0,
};
static void
app_init_mbuf_pools(void)
{
/* Init the buffer pool */
RTE_LOG(INFO, USER1, "Creating the mbuf pool ...\n");
app.pool = rte_mempool_create(
"mempool",
app.pool_size,
app.pool_buffer_size,
app.pool_cache_size,
sizeof(struct rte_pktmbuf_pool_private),
rte_pktmbuf_pool_init, NULL,
rte_pktmbuf_init, NULL,
rte_socket_id(),
0);
if (app.pool == NULL)
rte_panic("Cannot create mbuf pool\n");
}
static void
app_init_rings(void)
{
uint32_t i;
for (i = 0; i < app.n_ports; i++) {
char name[32];
snprintf(name, sizeof(name), "app_ring_rx_%u", i);
app.rings_rx[i] = rte_ring_create(
name,
app.ring_rx_size,
rte_socket_id(),
RING_F_SP_ENQ | RING_F_SC_DEQ);
if (app.rings_rx[i] == NULL)
rte_panic("Cannot create RX ring %u\n", i);
}
for (i = 0; i < app.n_ports; i++) {
char name[32];
snprintf(name, sizeof(name), "app_ring_tx_%u", i);
app.rings_tx[i] = rte_ring_create(
name,
app.ring_tx_size,
rte_socket_id(),
RING_F_SP_ENQ | RING_F_SC_DEQ);
if (app.rings_tx[i] == NULL)
rte_panic("Cannot create TX ring %u\n", i);
}
}
static void
app_ports_check_link(void)
{
uint32_t all_ports_up, i;
all_ports_up = 1;
for (i = 0; i < app.n_ports; i++) {
struct rte_eth_link link;
uint8_t port;
port = (uint8_t) app.ports[i];
memset(&link, 0, sizeof(link));
rte_eth_link_get_nowait(port, &link);
RTE_LOG(INFO, USER1, "Port %u (%u Gbps) %s\n",
port,
link.link_speed / 1000,
link.link_status ? "UP" : "DOWN");
if (link.link_status == 0)
all_ports_up = 0;
}
if (all_ports_up == 0)
rte_panic("Some NIC ports are DOWN\n");
}
static void
app_init_ports(void)
{
uint32_t i;
/* Init driver */
RTE_LOG(INFO, USER1, "Initializing the PMD driver ...\n");
if (rte_eal_pci_probe() < 0)
rte_panic("Cannot probe PCI\n");
/* Init NIC ports, then start the ports */
for (i = 0; i < app.n_ports; i++) {
uint8_t port;
int ret;
port = (uint8_t) app.ports[i];
RTE_LOG(INFO, USER1, "Initializing NIC port %u ...\n", port);
/* Init port */
ret = rte_eth_dev_configure(
port,
1,
1,
&port_conf);
if (ret < 0)
rte_panic("Cannot init NIC port %u (%d)\n", port, ret);
rte_eth_promiscuous_enable(port);
/* Init RX queues */
ret = rte_eth_rx_queue_setup(
port,
0,
app.port_rx_ring_size,
rte_eth_dev_socket_id(port),
&rx_conf,
app.pool);
if (ret < 0)
rte_panic("Cannot init RX for port %u (%d)\n",
(uint32_t) port, ret);
/* Init TX queues */
ret = rte_eth_tx_queue_setup(
port,
0,
app.port_tx_ring_size,
rte_eth_dev_socket_id(port),
&tx_conf);
if (ret < 0)
rte_panic("Cannot init TX for port %u (%d)\n",
(uint32_t) port, ret);
/* Start port */
ret = rte_eth_dev_start(port);
if (ret < 0)
rte_panic("Cannot start port %u (%d)\n", port, ret);
}
app_ports_check_link();
}
void
app_init(void)
{
app_init_mbuf_pools();
app_init_rings();
app_init_ports();
RTE_LOG(INFO, USER1, "Initialization completed\n");
}