d/numam-dpdk
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
99d7c45cf8
numam-dpdk/drivers/net/mlx5/mlx5_defs.h
Ophir Munk ffe262d675 net/mlx5: do not define static assert in Windows 
In Linux 'static_assert' is defined in file mlx5_defs.h:

 #ifndef HAVE_STATIC_ASSERT
    #define static_assert _Static_assert
 #endif

The same definition can originate from Linux file /usr/include/assert.h.

In Windows static_assert is used while _Static_assert is unknown.
Therefore update the definition condition to be:

 #if !defined(HAVE_STATIC_ASSERT) && !defined(RTE_EXEC_ENV_WINDOWS)
    #define static_assert _Static_assert
 #endif

Signed-off-by: Ophir Munk <ophirmu@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
2021-01-08 16:03:07 +01:00

211 lines
6.9 KiB
C
Raw Blame History

/* SPDX-License-Identifier: BSD-3-Clause
* Copyright 2015 6WIND S.A.
* Copyright 2015 Mellanox Technologies, Ltd
*/
#ifndef RTE_PMD_MLX5_DEFS_H_
#define RTE_PMD_MLX5_DEFS_H_
#include <rte_ethdev_driver.h>
#include <rte_vxlan.h>
#include "mlx5_autoconf.h"
/* Maximum number of simultaneous VLAN filters. */
#define MLX5_MAX_VLAN_IDS 128
/*
* Request TX completion every time descriptors reach this threshold since
* the previous request. Must be a power of two for performance reasons.
*/
#define MLX5_TX_COMP_THRESH 32u
/*
* Request TX completion every time the total number of WQEBBs used for inlining
* packets exceeds the size of WQ divided by this divisor. Better to be power of
* two for performance.
*/
#define MLX5_TX_COMP_THRESH_INLINE_DIV (1 << 3)
/*
* Maximal amount of normal completion CQEs
* processed in one call of tx_burst() routine.
*/
#define MLX5_TX_COMP_MAX_CQE 2u
/* Size of per-queue MR cache array for linear search. */
#define MLX5_MR_CACHE_N 8
/* Size of MR cache table for binary search. */
#define MLX5_MR_BTREE_CACHE_N 256
/*
* If defined, only use software counters. The PMD will never ask the hardware
* for these, and many of them won't be available.
*/
#ifndef MLX5_PMD_SOFT_COUNTERS
#define MLX5_PMD_SOFT_COUNTERS 1
#endif
/* Switch port ID parameters for bonding configurations. */
#define MLX5_PORT_ID_BONDING_PF_MASK 0xf
#define MLX5_PORT_ID_BONDING_PF_SHIFT 12
/* Alarm timeout. */
#define MLX5_ALARM_TIMEOUT_US 100000
/* Maximum number of extended statistics counters. */
#define MLX5_MAX_XSTATS 32
/* Maximum Packet headers size (L2+L3+L4) for TSO. */
#define MLX5_MAX_TSO_HEADER (128u + 34u)
/* Inline data size required by NICs. */
#define MLX5_INLINE_HSIZE_NONE 0
#define MLX5_INLINE_HSIZE_L2 (sizeof(struct rte_ether_hdr) + \
sizeof(struct rte_vlan_hdr))
#define MLX5_INLINE_HSIZE_L3 (MLX5_INLINE_HSIZE_L2 + \
sizeof(struct rte_ipv6_hdr))
#define MLX5_INLINE_HSIZE_L4 (MLX5_INLINE_HSIZE_L3 + \
sizeof(struct rte_tcp_hdr))
#define MLX5_INLINE_HSIZE_INNER_L2 (MLX5_INLINE_HSIZE_L3 + \
sizeof(struct rte_udp_hdr) + \
sizeof(struct rte_vxlan_hdr) + \
sizeof(struct rte_ether_hdr) + \
sizeof(struct rte_vlan_hdr))
#define MLX5_INLINE_HSIZE_INNER_L3 (MLX5_INLINE_HSIZE_INNER_L2 + \
sizeof(struct rte_ipv6_hdr))
#define MLX5_INLINE_HSIZE_INNER_L4 (MLX5_INLINE_HSIZE_INNER_L3 + \
sizeof(struct rte_tcp_hdr))
/* Threshold of buffer replenishment for vectorized Rx. */
#define MLX5_VPMD_RXQ_RPLNSH_THRESH(n) \
(RTE_MIN(MLX5_VPMD_RX_MAX_BURST, (unsigned int)(n) >> 2))
/* Maximum size of burst for vectorized Rx. */
#define MLX5_VPMD_RX_MAX_BURST 64U
/* Recommended optimal burst size. */
#define MLX5_RX_DEFAULT_BURST 64U
#define MLX5_TX_DEFAULT_BURST 64U
/* Number of packets vectorized Rx can simultaneously process in a loop. */
#define MLX5_VPMD_DESCS_PER_LOOP 4
/* Mask of RSS on source only or destination only. */
#define MLX5_RSS_SRC_DST_ONLY (ETH_RSS_L3_SRC_ONLY | ETH_RSS_L3_DST_ONLY | \
ETH_RSS_L4_SRC_ONLY | ETH_RSS_L4_DST_ONLY)
/* Supported RSS */
#define MLX5_RSS_HF_MASK (~(ETH_RSS_IP | ETH_RSS_UDP | ETH_RSS_TCP | \
MLX5_RSS_SRC_DST_ONLY))
/* Timeout in seconds to get a valid link status. */
#define MLX5_LINK_STATUS_TIMEOUT 10
/* Number of times to retry retrieving the physical link information. */
#define MLX5_GET_LINK_STATUS_RETRY_COUNT 3
/* Maximum number of UAR pages used by a port,
* These are the size and mask for an array of mutexes used to synchronize
* the access to port's UARs on platforms that do not support 64 bit writes.
* In such systems it is possible to issue the 64 bits DoorBells through two
* consecutive writes, each write 32 bits. The access to a UAR page (which can
* be accessible by all threads in the process) must be synchronized
* (for example, using a semaphore). Such a synchronization is not required
* when ringing DoorBells on different UAR pages.
* A port with 512 Tx queues uses 8, 4kBytes, UAR pages which are shared
* among the ports.
*/
#define MLX5_UAR_PAGE_NUM_MAX 64
#define MLX5_UAR_PAGE_NUM_MASK ((MLX5_UAR_PAGE_NUM_MAX) - 1)
/* Fields of memory mapping type in offset parameter of mmap() */
#define MLX5_UAR_MMAP_CMD_SHIFT 8
#define MLX5_UAR_MMAP_CMD_MASK 0xff
/* Environment variable to control the doorbell register mapping. */
#define MLX5_SHUT_UP_BF "MLX5_SHUT_UP_BF"
#if defined(RTE_ARCH_ARM64)
#define MLX5_SHUT_UP_BF_DEFAULT "0"
#else
#define MLX5_SHUT_UP_BF_DEFAULT "1"
#endif
#ifndef HAVE_MLX5DV_MMAP_GET_NC_PAGES_CMD
#define MLX5_MMAP_GET_NC_PAGES_CMD 3
#endif
/* Log 2 of the default number of strides per WQE for Multi-Packet RQ. */
#define MLX5_MPRQ_STRIDE_NUM_N 6U
/* Log 2 of the default size of a stride per WQE for Multi-Packet RQ. */
#define MLX5_MPRQ_STRIDE_SIZE_N 11U
/* Two-byte shift is disabled for Multi-Packet RQ. */
#define MLX5_MPRQ_TWO_BYTE_SHIFT 0
/*
* Minimum size of packet to be memcpy'd instead of being attached as an
* external buffer.
*/
#define MLX5_MPRQ_MEMCPY_DEFAULT_LEN 128
/* Minimum number Rx queues to enable Multi-Packet RQ. */
#define MLX5_MPRQ_MIN_RXQS 12
/* Cache size of mempool for Multi-Packet RQ. */
#define MLX5_MPRQ_MP_CACHE_SZ 32U
/* MLX5_DV_XMETA_EN supported values. */
#define MLX5_XMETA_MODE_LEGACY 0
#define MLX5_XMETA_MODE_META16 1
#define MLX5_XMETA_MODE_META32 2
/* Provide info on patrial hw miss. Implies MLX5_XMETA_MODE_META16 */
#define MLX5_XMETA_MODE_MISS_INFO 3
/* MLX5_TX_DB_NC supported values. */
#define MLX5_TXDB_CACHED 0
#define MLX5_TXDB_NCACHED 1
#define MLX5_TXDB_HEURISTIC 2
/* Tx accurate scheduling on timestamps parameters. */
#define MLX5_TXPP_WAIT_INIT_TS 1000ul /* How long to wait timestamp. */
#define MLX5_TXPP_CLKQ_SIZE 1
#define MLX5_TXPP_REARM ((1UL << MLX5_WQ_INDEX_WIDTH) / 4)
#define MLX5_TXPP_REARM_SQ_SIZE (((1UL << MLX5_CQ_INDEX_WIDTH) / \
MLX5_TXPP_REARM) * 2)
#define MLX5_TXPP_REARM_CQ_SIZE (MLX5_TXPP_REARM_SQ_SIZE / 2)
/* The minimal size test packet to put into one WQE, padded by HW. */
#define MLX5_TXPP_TEST_PKT_SIZE (sizeof(struct rte_ether_hdr) + \
sizeof(struct rte_ipv4_hdr))
/* Size of the simple hash table for metadata register table. */
#define MLX5_FLOW_MREG_HTABLE_SZ 4096
#define MLX5_FLOW_MREG_HNAME "MARK_COPY_TABLE"
#define MLX5_DEFAULT_COPY_ID UINT32_MAX
/* Size of the simple hash table for header modify table. */
#define MLX5_FLOW_HDR_MODIFY_HTABLE_SZ (1 << 16)
/* Size of the simple hash table for encap decap table. */
#define MLX5_FLOW_ENCAP_DECAP_HTABLE_SZ (1 << 16)
/* Hairpin TX/RX queue configuration parameters. */
#define MLX5_HAIRPIN_QUEUE_STRIDE 6
#define MLX5_HAIRPIN_JUMBO_LOG_SIZE (14 + 2)
/* Maximum number of shared actions supported by rte_flow */
#define MLX5_MAX_SHARED_ACTIONS 2
/*
* Linux definition of static_assert is found in /usr/include/assert.h.
* Windows does not require a redefinition.
*/
#if !defined(HAVE_STATIC_ASSERT) && !defined(RTE_EXEC_ENV_WINDOWS)
#define static_assert _Static_assert
#endif
#endif /* RTE_PMD_MLX5_DEFS_H_ */
Reference in New Issue View Git Blame Copy Permalink