numam-dpdk/app/test/test_sched.c
David Marchand 7822c43aba app/test: only build what has been selected in config
Avoid building tests if their counterparts are not selected in config.
This has the nice side effect of fixing build errors when disabling parts of
the dpdk.

Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
2014-08-26 17:52:34 +02:00

235 lines
6.5 KiB
C

/*-
* BSD LICENSE
*
* Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <stdint.h>
#include <unistd.h>
#include "test.h"
#include <rte_cycles.h>
#include <rte_ether.h>
#include <rte_ip.h>
#include <rte_byteorder.h>
#include <rte_sched.h>
#define VERIFY(exp,fmt,args...) \
if (!(exp)) { \
printf(fmt, ##args); \
return -1; \
}
#define SUBPORT 0
#define PIPE 1
#define TC 2
#define QUEUE 3
static struct rte_sched_subport_params subport_param[] = {
{
.tb_rate = 1250000000,
.tb_size = 1000000,
.tc_rate = {1250000000, 1250000000, 1250000000, 1250000000},
.tc_period = 10,
},
};
static struct rte_sched_pipe_params pipe_profile[] = {
{ /* Profile #0 */
.tb_rate = 305175,
.tb_size = 1000000,
.tc_rate = {305175, 305175, 305175, 305175},
.tc_period = 40,
.wrr_weights = {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1},
},
};
static struct rte_sched_port_params port_param = {
.socket = 0, /* computed */
.rate = 0, /* computed */
.mtu = 1522,
.frame_overhead = RTE_SCHED_FRAME_OVERHEAD_DEFAULT,
.n_subports_per_port = 1,
.n_pipes_per_subport = 4096,
.qsize = {64, 64, 64, 64},
.pipe_profiles = pipe_profile,
.n_pipe_profiles = 1,
};
#define NB_MBUF 32
#define MAX_PACKET_SZ 2048
#define MBUF_SZ (MAX_PACKET_SZ + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
#define PKT_BURST_SZ 32
#define MEMPOOL_CACHE_SZ PKT_BURST_SZ
#define SOCKET 0
static struct rte_mempool *
create_mempool(void)
{
struct rte_mempool * mp;
mp = rte_mempool_lookup("test_sched");
if (!mp)
mp = rte_mempool_create("test_sched",
NB_MBUF,
MBUF_SZ,
MEMPOOL_CACHE_SZ,
sizeof(struct rte_pktmbuf_pool_private),
rte_pktmbuf_pool_init,
NULL,
rte_pktmbuf_init,
NULL,
SOCKET,
0);
return mp;
}
static void
prepare_pkt(struct rte_mbuf *mbuf)
{
struct ether_hdr *eth_hdr;
struct vlan_hdr *vlan1, *vlan2;
struct ipv4_hdr *ip_hdr;
/* Simulate a classifier */
eth_hdr = rte_pktmbuf_mtod(mbuf, struct ether_hdr *);
vlan1 = (struct vlan_hdr *)(&eth_hdr->ether_type );
vlan2 = (struct vlan_hdr *)((uintptr_t)&eth_hdr->ether_type + sizeof(struct vlan_hdr));
eth_hdr = (struct ether_hdr *)((uintptr_t)&eth_hdr->ether_type + 2 *sizeof(struct vlan_hdr));
ip_hdr = (struct ipv4_hdr *)((uintptr_t)eth_hdr + sizeof(eth_hdr->ether_type));
vlan1->vlan_tci = rte_cpu_to_be_16(SUBPORT);
vlan2->vlan_tci = rte_cpu_to_be_16(PIPE);
eth_hdr->ether_type = rte_cpu_to_be_16(ETHER_TYPE_IPv4);
ip_hdr->dst_addr = IPv4(0,0,TC,QUEUE);
rte_sched_port_pkt_write(mbuf, SUBPORT, PIPE, TC, QUEUE, e_RTE_METER_YELLOW);
/* 64 byte packet */
mbuf->pkt.pkt_len = 60;
mbuf->pkt.data_len = 60;
}
/**
* test main entrance for library sched
*/
static int
test_sched(void)
{
struct rte_mempool *mp = NULL;
struct rte_sched_port *port = NULL;
uint32_t pipe;
struct rte_mbuf *in_mbufs[10];
struct rte_mbuf *out_mbufs[10];
int i;
int err;
mp = create_mempool();
port_param.socket = 0;
port_param.rate = (uint64_t) 10000 * 1000 * 1000 / 8;
port = rte_sched_port_config(&port_param);
VERIFY(port != NULL, "Error config sched port\n");
err = rte_sched_subport_config(port, SUBPORT, subport_param);
VERIFY(err == 0, "Error config sched, err=%d\n", err);
for (pipe = 0; pipe < port_param.n_pipes_per_subport; pipe ++) {
err = rte_sched_pipe_config(port, SUBPORT, pipe, 0);
VERIFY(err == 0, "Error config sched pipe %u, err=%d\n", pipe, err);
}
for (i = 0; i < 10; i++) {
in_mbufs[i] = rte_pktmbuf_alloc(mp);
prepare_pkt(in_mbufs[i]);
}
err = rte_sched_port_enqueue(port, in_mbufs, 10);
VERIFY(err == 10, "Wrong enqueue, err=%d\n", err);
err = rte_sched_port_dequeue(port, out_mbufs, 10);
VERIFY(err == 10, "Wrong dequeue, err=%d\n", err);
for (i = 0; i < 10; i++) {
enum rte_meter_color color;
uint32_t subport, traffic_class, queue;
color = rte_sched_port_pkt_read_color(out_mbufs[i]);
VERIFY(color == e_RTE_METER_YELLOW, "Wrong color\n");
rte_sched_port_pkt_read_tree_path(out_mbufs[i],
&subport, &pipe, &traffic_class, &queue);
VERIFY(subport == SUBPORT, "Wrong subport\n");
VERIFY(pipe == PIPE, "Wrong pipe\n");
VERIFY(traffic_class == TC, "Wrong traffic_class\n");
VERIFY(queue == QUEUE, "Wrong queue\n");
}
struct rte_sched_subport_stats subport_stats;
uint32_t tc_ov;
rte_sched_subport_read_stats(port, SUBPORT, &subport_stats, &tc_ov);
//VERIFY(subport_stats.n_pkts_tc[TC-1] == 10, "Wrong subport stats\n");
struct rte_sched_queue_stats queue_stats;
uint16_t qlen;
rte_sched_queue_read_stats(port, QUEUE, &queue_stats, &qlen);
//VERIFY(queue_stats.n_pkts == 10, "Wrong queue stats\n");
rte_sched_port_free(port);
return 0;
}
static struct test_command sched_cmd = {
.command = "sched_autotest",
.callback = test_sched,
};
REGISTER_TEST_COMMAND(sched_cmd);