d/numam-dpdk
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
9b6f0c969b
numam-dpdk/drivers/net/mlx5/mlx5.c
Dekel Peled 8a6a09f853 net/mlx5: support reading module EEPROM data 
This patch implements ethdev operations get_module_info and
get_module_eeprom, to support ethtool commands ETHTOOL_GMODULEINFO
and ETHTOOL_GMODULEEEPROM.

New functions mlx5_get_module_info() and mlx5_get_module_eeprom()
added in mlx5_ethdev.c.

Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
2019-09-20 10:19:41 +02:00

2763 lines
78 KiB
C
Raw Blame History

/* SPDX-License-Identifier: BSD-3-Clause
* Copyright 2015 6WIND S.A.
* Copyright 2015 Mellanox Technologies, Ltd
*/
#include <stddef.h>
#include <unistd.h>
#include <string.h>
#include <assert.h>
#include <dlfcn.h>
#include <stdint.h>
#include <stdlib.h>
#include <errno.h>
#include <net/if.h>
#include <sys/mman.h>
#include <linux/rtnetlink.h>
/* Verbs header. */
/* ISO C doesn't support unnamed structs/unions, disabling -pedantic. */
#ifdef PEDANTIC
#pragma GCC diagnostic ignored "-Wpedantic"
#endif
#include <infiniband/verbs.h>
#ifdef PEDANTIC
#pragma GCC diagnostic error "-Wpedantic"
#endif
#include <rte_malloc.h>
#include <rte_ethdev_driver.h>
#include <rte_ethdev_pci.h>
#include <rte_pci.h>
#include <rte_bus_pci.h>
#include <rte_common.h>
#include <rte_config.h>
#include <rte_kvargs.h>
#include <rte_rwlock.h>
#include <rte_spinlock.h>
#include <rte_string_fns.h>
#include <rte_alarm.h>
#include "mlx5.h"
#include "mlx5_utils.h"
#include "mlx5_rxtx.h"
#include "mlx5_autoconf.h"
#include "mlx5_defs.h"
#include "mlx5_glue.h"
#include "mlx5_mr.h"
#include "mlx5_flow.h"
/* Device parameter to enable RX completion queue compression. */
#define MLX5_RXQ_CQE_COMP_EN "rxq_cqe_comp_en"
/* Device parameter to enable RX completion entry padding to 128B. */
#define MLX5_RXQ_CQE_PAD_EN "rxq_cqe_pad_en"
/* Device parameter to enable padding Rx packet to cacheline size. */
#define MLX5_RXQ_PKT_PAD_EN "rxq_pkt_pad_en"
/* Device parameter to enable Multi-Packet Rx queue. */
#define MLX5_RX_MPRQ_EN "mprq_en"
/* Device parameter to configure log 2 of the number of strides for MPRQ. */
#define MLX5_RX_MPRQ_LOG_STRIDE_NUM "mprq_log_stride_num"
/* Device parameter to limit the size of memcpy'd packet for MPRQ. */
#define MLX5_RX_MPRQ_MAX_MEMCPY_LEN "mprq_max_memcpy_len"
/* Device parameter to set the minimum number of Rx queues to enable MPRQ. */
#define MLX5_RXQS_MIN_MPRQ "rxqs_min_mprq"
/* Device parameter to configure inline send. Deprecated, ignored.*/
#define MLX5_TXQ_INLINE "txq_inline"
/* Device parameter to limit packet size to inline with ordinary SEND. */
#define MLX5_TXQ_INLINE_MAX "txq_inline_max"
/* Device parameter to configure minimal data size to inline. */
#define MLX5_TXQ_INLINE_MIN "txq_inline_min"
/* Device parameter to limit packet size to inline with Enhanced MPW. */
#define MLX5_TXQ_INLINE_MPW "txq_inline_mpw"
/*
* Device parameter to configure the number of TX queues threshold for
* enabling inline send.
*/
#define MLX5_TXQS_MIN_INLINE "txqs_min_inline"
/*
* Device parameter to configure the number of TX queues threshold for
* enabling vectorized Tx, deprecated, ignored (no vectorized Tx routines).
*/
#define MLX5_TXQS_MAX_VEC "txqs_max_vec"
/* Device parameter to enable multi-packet send WQEs. */
#define MLX5_TXQ_MPW_EN "txq_mpw_en"
/*
* Device parameter to include 2 dsegs in the title WQEBB.
* Deprecated, ignored.
*/
#define MLX5_TXQ_MPW_HDR_DSEG_EN "txq_mpw_hdr_dseg_en"
/*
* Device parameter to limit the size of inlining packet.
* Deprecated, ignored.
*/
#define MLX5_TXQ_MAX_INLINE_LEN "txq_max_inline_len"
/*
* Device parameter to enable hardware Tx vector.
* Deprecated, ignored (no vectorized Tx routines anymore).
*/
#define MLX5_TX_VEC_EN "tx_vec_en"
/* Device parameter to enable hardware Rx vector. */
#define MLX5_RX_VEC_EN "rx_vec_en"
/* Allow L3 VXLAN flow creation. */
#define MLX5_L3_VXLAN_EN "l3_vxlan_en"
/* Activate DV E-Switch flow steering. */
#define MLX5_DV_ESW_EN "dv_esw_en"
/* Activate DV flow steering. */
#define MLX5_DV_FLOW_EN "dv_flow_en"
/* Activate Netlink support in VF mode. */
#define MLX5_VF_NL_EN "vf_nl_en"
/* Enable extending memsegs when creating a MR. */
#define MLX5_MR_EXT_MEMSEG_EN "mr_ext_memseg_en"
/* Select port representors to instantiate. */
#define MLX5_REPRESENTOR "representor"
/* Device parameter to configure the maximum number of dump files per queue. */
#define MLX5_MAX_DUMP_FILES_NUM "max_dump_files_num"
/* Configure timeout of LRO session (in microseconds). */
#define MLX5_LRO_TIMEOUT_USEC "lro_timeout_usec"
#ifndef HAVE_IBV_MLX5_MOD_MPW
#define MLX5DV_CONTEXT_FLAGS_MPW_ALLOWED (1 << 2)
#define MLX5DV_CONTEXT_FLAGS_ENHANCED_MPW (1 << 3)
#endif
#ifndef HAVE_IBV_MLX5_MOD_CQE_128B_COMP
#define MLX5DV_CONTEXT_FLAGS_CQE_128B_COMP (1 << 4)
#endif
static const char *MZ_MLX5_PMD_SHARED_DATA = "mlx5_pmd_shared_data";
/* Shared memory between primary and secondary processes. */
struct mlx5_shared_data *mlx5_shared_data;
/* Spinlock for mlx5_shared_data allocation. */
static rte_spinlock_t mlx5_shared_data_lock = RTE_SPINLOCK_INITIALIZER;
/* Process local data for secondary processes. */
static struct mlx5_local_data mlx5_local_data;
/** Driver-specific log messages type. */
int mlx5_logtype;
/** Data associated with devices to spawn. */
struct mlx5_dev_spawn_data {
uint32_t ifindex; /**< Network interface index. */
uint32_t max_port; /**< IB device maximal port index. */
uint32_t ibv_port; /**< IB device physical port index. */
struct mlx5_switch_info info; /**< Switch information. */
struct ibv_device *ibv_dev; /**< Associated IB device. */
struct rte_eth_dev *eth_dev; /**< Associated Ethernet device. */
struct rte_pci_device *pci_dev; /**< Backend PCI device. */
};
static LIST_HEAD(, mlx5_ibv_shared) mlx5_ibv_list = LIST_HEAD_INITIALIZER();
static pthread_mutex_t mlx5_ibv_list_mutex = PTHREAD_MUTEX_INITIALIZER;
/**
* Initialize the counters management structure.
*
* @param[in] sh
* Pointer to mlx5_ibv_shared object to free
*/
static void
mlx5_flow_counters_mng_init(struct mlx5_ibv_shared *sh)
{
uint8_t i;
TAILQ_INIT(&sh->cmng.flow_counters);
for (i = 0; i < RTE_DIM(sh->cmng.ccont); ++i)
TAILQ_INIT(&sh->cmng.ccont[i].pool_list);
}
/**
* Destroy all the resources allocated for a counter memory management.
*
* @param[in] mng
* Pointer to the memory management structure.
*/
static void
mlx5_flow_destroy_counter_stat_mem_mng(struct mlx5_counter_stats_mem_mng *mng)
{
uint8_t *mem = (uint8_t *)(uintptr_t)mng->raws[0].data;
LIST_REMOVE(mng, next);
claim_zero(mlx5_devx_cmd_destroy(mng->dm));
claim_zero(mlx5_glue->devx_umem_dereg(mng->umem));
rte_free(mem);
}
/**
* Close and release all the resources of the counters management.
*
* @param[in] sh
* Pointer to mlx5_ibv_shared object to free.
*/
static void
mlx5_flow_counters_mng_close(struct mlx5_ibv_shared *sh)
{
struct mlx5_counter_stats_mem_mng *mng;
uint8_t i;
int j;
int retries = 1024;
rte_errno = 0;
while (--retries) {
rte_eal_alarm_cancel(mlx5_flow_query_alarm, sh);
if (rte_errno != EINPROGRESS)
break;
rte_pause();
}
for (i = 0; i < RTE_DIM(sh->cmng.ccont); ++i) {
struct mlx5_flow_counter_pool *pool;
uint32_t batch = !!(i % 2);
if (!sh->cmng.ccont[i].pools)
continue;
pool = TAILQ_FIRST(&sh->cmng.ccont[i].pool_list);
while (pool) {
if (batch) {
if (pool->min_dcs)
claim_zero
(mlx5_devx_cmd_destroy(pool->min_dcs));
}
for (j = 0; j < MLX5_COUNTERS_PER_POOL; ++j) {
if (pool->counters_raw[j].action)
claim_zero
(mlx5_glue->destroy_flow_action
(pool->counters_raw[j].action));
if (!batch && pool->counters_raw[j].dcs)
claim_zero(mlx5_devx_cmd_destroy
(pool->counters_raw[j].dcs));
}
TAILQ_REMOVE(&sh->cmng.ccont[i].pool_list, pool,
next);
rte_free(pool);
pool = TAILQ_FIRST(&sh->cmng.ccont[i].pool_list);
}
rte_free(sh->cmng.ccont[i].pools);
}
mng = LIST_FIRST(&sh->cmng.mem_mngs);
while (mng) {
mlx5_flow_destroy_counter_stat_mem_mng(mng);
mng = LIST_FIRST(&sh->cmng.mem_mngs);
}
memset(&sh->cmng, 0, sizeof(sh->cmng));
}
/**
* Extract pdn of PD object using DV API.
*
* @param[in] pd
* Pointer to the verbs PD object.
* @param[out] pdn
* Pointer to the PD object number variable.
*
* @return
* 0 on success, error value otherwise.
*/
#ifdef HAVE_IBV_FLOW_DV_SUPPORT
static int
mlx5_get_pdn(struct ibv_pd *pd __rte_unused, uint32_t *pdn __rte_unused)
{
struct mlx5dv_obj obj;
struct mlx5dv_pd pd_info;
int ret = 0;
obj.pd.in = pd;
obj.pd.out = &pd_info;
ret = mlx5_glue->dv_init_obj(&obj, MLX5DV_OBJ_PD);
if (ret) {
DRV_LOG(DEBUG, "Fail to get PD object info");
return ret;
}
*pdn = pd_info.pdn;
return 0;
}
#endif /* HAVE_IBV_FLOW_DV_SUPPORT */
/**
* Allocate shared IB device context. If there is multiport device the
* master and representors will share this context, if there is single
* port dedicated IB device, the context will be used by only given
* port due to unification.
*
* Routine first searches the context for the specified IB device name,
* if found the shared context assumed and reference counter is incremented.
* If no context found the new one is created and initialized with specified
* IB device context and parameters.
*
* @param[in] spawn
* Pointer to the IB device attributes (name, port, etc).
*
* @return
* Pointer to mlx5_ibv_shared object on success,
* otherwise NULL and rte_errno is set.
*/
static struct mlx5_ibv_shared *
mlx5_alloc_shared_ibctx(const struct mlx5_dev_spawn_data *spawn)
{
struct mlx5_ibv_shared *sh;
int err = 0;
uint32_t i;
assert(spawn);
/* Secondary process should not create the shared context. */
assert(rte_eal_process_type() == RTE_PROC_PRIMARY);
pthread_mutex_lock(&mlx5_ibv_list_mutex);
/* Search for IB context by device name. */
LIST_FOREACH(sh, &mlx5_ibv_list, next) {
if (!strcmp(sh->ibdev_name, spawn->ibv_dev->name)) {
sh->refcnt++;
goto exit;
}
}
/* No device found, we have to create new shared context. */
assert(spawn->max_port);
sh = rte_zmalloc("ethdev shared ib context",
sizeof(struct mlx5_ibv_shared) +
spawn->max_port *
sizeof(struct mlx5_ibv_shared_port),
RTE_CACHE_LINE_SIZE);
if (!sh) {
DRV_LOG(ERR, "shared context allocation failure");
rte_errno = ENOMEM;
goto exit;
}
/* Try to open IB device with DV first, then usual Verbs. */
errno = 0;
sh->ctx = mlx5_glue->dv_open_device(spawn->ibv_dev);
if (sh->ctx) {
sh->devx = 1;
DRV_LOG(DEBUG, "DevX is supported");
} else {
sh->ctx = mlx5_glue->open_device(spawn->ibv_dev);
if (!sh->ctx) {
err = errno ? errno : ENODEV;
goto error;
}
DRV_LOG(DEBUG, "DevX is NOT supported");
}
err = mlx5_glue->query_device_ex(sh->ctx, NULL, &sh->device_attr);
if (err) {
DRV_LOG(DEBUG, "ibv_query_device_ex() failed");
goto error;
}
sh->refcnt = 1;
sh->max_port = spawn->max_port;
strncpy(sh->ibdev_name, sh->ctx->device->name,
sizeof(sh->ibdev_name));
strncpy(sh->ibdev_path, sh->ctx->device->ibdev_path,
sizeof(sh->ibdev_path));
sh->pci_dev = spawn->pci_dev;
pthread_mutex_init(&sh->intr_mutex, NULL);
/*
* Setting port_id to max unallowed value means
* there is no interrupt subhandler installed for
* the given port index i.
*/
for (i = 0; i < sh->max_port; i++)
sh->port[i].ih_port_id = RTE_MAX_ETHPORTS;
sh->pd = mlx5_glue->alloc_pd(sh->ctx);
if (sh->pd == NULL) {
DRV_LOG(ERR, "PD allocation failure");
err = ENOMEM;
goto error;
}
#ifdef HAVE_IBV_FLOW_DV_SUPPORT
err = mlx5_get_pdn(sh->pd, &sh->pdn);
if (err) {
DRV_LOG(ERR, "Fail to extract pdn from PD");
goto error;
}
#endif /* HAVE_IBV_FLOW_DV_SUPPORT */
/*
* Once the device is added to the list of memory event
* callback, its global MR cache table cannot be expanded
* on the fly because of deadlock. If it overflows, lookup
* should be done by searching MR list linearly, which is slow.
*
* At this point the device is not added to the memory
* event list yet, context is just being created.
*/
err = mlx5_mr_btree_init(&sh->mr.cache,
MLX5_MR_BTREE_CACHE_N * 2,
sh->pci_dev->device.numa_node);
if (err) {
err = rte_errno;
goto error;
}
mlx5_flow_counters_mng_init(sh);
/* Add device to memory callback list. */
rte_rwlock_write_lock(&mlx5_shared_data->mem_event_rwlock);
LIST_INSERT_HEAD(&mlx5_shared_data->mem_event_cb_list,
sh, mem_event_cb);
rte_rwlock_write_unlock(&mlx5_shared_data->mem_event_rwlock);
/* Add context to the global device list. */
LIST_INSERT_HEAD(&mlx5_ibv_list, sh, next);
exit:
pthread_mutex_unlock(&mlx5_ibv_list_mutex);
return sh;
error:
pthread_mutex_unlock(&mlx5_ibv_list_mutex);
assert(sh);
if (sh->pd)
claim_zero(mlx5_glue->dealloc_pd(sh->pd));
if (sh->ctx)
claim_zero(mlx5_glue->close_device(sh->ctx));
rte_free(sh);
assert(err > 0);
rte_errno = err;
return NULL;
}
/**
* Free shared IB device context. Decrement counter and if zero free
* all allocated resources and close handles.
*
* @param[in] sh
* Pointer to mlx5_ibv_shared object to free
*/
static void
mlx5_free_shared_ibctx(struct mlx5_ibv_shared *sh)
{
pthread_mutex_lock(&mlx5_ibv_list_mutex);
#ifndef NDEBUG
/* Check the object presence in the list. */
struct mlx5_ibv_shared *lctx;
LIST_FOREACH(lctx, &mlx5_ibv_list, next)
if (lctx == sh)
break;
assert(lctx);
if (lctx != sh) {
DRV_LOG(ERR, "Freeing non-existing shared IB context");
goto exit;
}
#endif
assert(sh);
assert(sh->refcnt);
/* Secondary process should not free the shared context. */
assert(rte_eal_process_type() == RTE_PROC_PRIMARY);
if (--sh->refcnt)
goto exit;
/* Release created Memory Regions. */
mlx5_mr_release(sh);
/* Remove from memory callback device list. */
rte_rwlock_write_lock(&mlx5_shared_data->mem_event_rwlock);
LIST_REMOVE(sh, mem_event_cb);
rte_rwlock_write_unlock(&mlx5_shared_data->mem_event_rwlock);
/* Remove context from the global device list. */
LIST_REMOVE(sh, next);
/*
* Ensure there is no async event handler installed.
* Only primary process handles async device events.
**/
mlx5_flow_counters_mng_close(sh);
assert(!sh->intr_cnt);
if (sh->intr_cnt)
mlx5_intr_callback_unregister
(&sh->intr_handle, mlx5_dev_interrupt_handler, sh);
pthread_mutex_destroy(&sh->intr_mutex);
if (sh->pd)
claim_zero(mlx5_glue->dealloc_pd(sh->pd));
if (sh->ctx)
claim_zero(mlx5_glue->close_device(sh->ctx));
rte_free(sh);
exit:
pthread_mutex_unlock(&mlx5_ibv_list_mutex);
}
/**
* Initialize DR related data within private structure.
* Routine checks the reference counter and does actual
* resources creation/initialization only if counter is zero.
*
* @param[in] priv
* Pointer to the private device data structure.
*
* @return
* Zero on success, positive error code otherwise.
*/
static int
mlx5_alloc_shared_dr(struct mlx5_priv *priv)
{
#ifdef HAVE_MLX5DV_DR
struct mlx5_ibv_shared *sh = priv->sh;
int err = 0;
void *domain;
assert(sh);
if (sh->dv_refcnt) {
/* Shared DV/DR structures is already initialized. */
sh->dv_refcnt++;
priv->dr_shared = 1;
return 0;
}
/* Reference counter is zero, we should initialize structures. */
domain = mlx5_glue->dr_create_domain(sh->ctx,
MLX5DV_DR_DOMAIN_TYPE_NIC_RX);
if (!domain) {
DRV_LOG(ERR, "ingress mlx5dv_dr_create_domain failed");
err = errno;
goto error;
}
sh->rx_domain = domain;
domain = mlx5_glue->dr_create_domain(sh->ctx,
MLX5DV_DR_DOMAIN_TYPE_NIC_TX);
if (!domain) {
DRV_LOG(ERR, "egress mlx5dv_dr_create_domain failed");
err = errno;
goto error;
}
pthread_mutex_init(&sh->dv_mutex, NULL);
sh->tx_domain = domain;
#ifdef HAVE_MLX5DV_DR_ESWITCH
if (priv->config.dv_esw_en) {
domain = mlx5_glue->dr_create_domain
(sh->ctx, MLX5DV_DR_DOMAIN_TYPE_FDB);
if (!domain) {
DRV_LOG(ERR, "FDB mlx5dv_dr_create_domain failed");
err = errno;
goto error;
}
sh->fdb_domain = domain;
sh->esw_drop_action = mlx5_glue->dr_create_flow_action_drop();
}
#endif
sh->pop_vlan_action = mlx5_glue->dr_create_flow_action_pop_vlan();
sh->dv_refcnt++;
priv->dr_shared = 1;
return 0;
error:
/* Rollback the created objects. */
if (sh->rx_domain) {
mlx5_glue->dr_destroy_domain(sh->rx_domain);
sh->rx_domain = NULL;
}
if (sh->tx_domain) {
mlx5_glue->dr_destroy_domain(sh->tx_domain);
sh->tx_domain = NULL;
}
if (sh->fdb_domain) {
mlx5_glue->dr_destroy_domain(sh->fdb_domain);
sh->fdb_domain = NULL;
}
if (sh->esw_drop_action) {
mlx5_glue->destroy_flow_action(sh->esw_drop_action);
sh->esw_drop_action = NULL;
}
if (sh->pop_vlan_action) {
mlx5_glue->destroy_flow_action(sh->pop_vlan_action);
sh->pop_vlan_action = NULL;
}
return err;
#else
(void)priv;
return 0;
#endif
}
/**
* Destroy DR related data within private structure.
*
* @param[in] priv
* Pointer to the private device data structure.
*/
static void
mlx5_free_shared_dr(struct mlx5_priv *priv)
{
#ifdef HAVE_MLX5DV_DR
struct mlx5_ibv_shared *sh;
if (!priv->dr_shared)
return;
priv->dr_shared = 0;
sh = priv->sh;
assert(sh);
assert(sh->dv_refcnt);
if (sh->dv_refcnt && --sh->dv_refcnt)
return;
if (sh->rx_domain) {
mlx5_glue->dr_destroy_domain(sh->rx_domain);
sh->rx_domain = NULL;
}
if (sh->tx_domain) {
mlx5_glue->dr_destroy_domain(sh->tx_domain);
sh->tx_domain = NULL;
}
#ifdef HAVE_MLX5DV_DR_ESWITCH
if (sh->fdb_domain) {
mlx5_glue->dr_destroy_domain(sh->fdb_domain);
sh->fdb_domain = NULL;
}
if (sh->esw_drop_action) {
mlx5_glue->destroy_flow_action(sh->esw_drop_action);
sh->esw_drop_action = NULL;
}
#endif
if (sh->pop_vlan_action) {
mlx5_glue->destroy_flow_action(sh->pop_vlan_action);
sh->pop_vlan_action = NULL;
}
pthread_mutex_destroy(&sh->dv_mutex);
#else
(void)priv;
#endif
}
/**
* Initialize shared data between primary and secondary process.
*
* A memzone is reserved by primary process and secondary processes attach to
* the memzone.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
mlx5_init_shared_data(void)
{
const struct rte_memzone *mz;
int ret = 0;
rte_spinlock_lock(&mlx5_shared_data_lock);
if (mlx5_shared_data == NULL) {
if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
/* Allocate shared memory. */
mz = rte_memzone_reserve(MZ_MLX5_PMD_SHARED_DATA,
sizeof(*mlx5_shared_data),
SOCKET_ID_ANY, 0);
if (mz == NULL) {
DRV_LOG(ERR,
"Cannot allocate mlx5 shared data\n");
ret = -rte_errno;
goto error;
}
mlx5_shared_data = mz->addr;
memset(mlx5_shared_data, 0, sizeof(*mlx5_shared_data));
rte_spinlock_init(&mlx5_shared_data->lock);
} else {
/* Lookup allocated shared memory. */
mz = rte_memzone_lookup(MZ_MLX5_PMD_SHARED_DATA);
if (mz == NULL) {
DRV_LOG(ERR,
"Cannot attach mlx5 shared data\n");
ret = -rte_errno;
goto error;
}
mlx5_shared_data = mz->addr;
memset(&mlx5_local_data, 0, sizeof(mlx5_local_data));
}
}
error:
rte_spinlock_unlock(&mlx5_shared_data_lock);
return ret;
}
/**
* Retrieve integer value from environment variable.
*
* @param[in] name
* Environment variable name.
*
* @return
* Integer value, 0 if the variable is not set.
*/
int
mlx5_getenv_int(const char *name)
{
const char *val = getenv(name);
if (val == NULL)
return 0;
return atoi(val);
}
/**
* Verbs callback to allocate a memory. This function should allocate the space
* according to the size provided residing inside a huge page.
* Please note that all allocation must respect the alignment from libmlx5
* (i.e. currently sysconf(_SC_PAGESIZE)).
*
* @param[in] size
* The size in bytes of the memory to allocate.
* @param[in] data
* A pointer to the callback data.
*
* @return
* Allocated buffer, NULL otherwise and rte_errno is set.
*/
static void *
mlx5_alloc_verbs_buf(size_t size, void *data)
{
struct mlx5_priv *priv = data;
void *ret;
size_t alignment = sysconf(_SC_PAGESIZE);
unsigned int socket = SOCKET_ID_ANY;
if (priv->verbs_alloc_ctx.type == MLX5_VERBS_ALLOC_TYPE_TX_QUEUE) {
const struct mlx5_txq_ctrl *ctrl = priv->verbs_alloc_ctx.obj;
socket = ctrl->socket;
} else if (priv->verbs_alloc_ctx.type ==
MLX5_VERBS_ALLOC_TYPE_RX_QUEUE) {
const struct mlx5_rxq_ctrl *ctrl = priv->verbs_alloc_ctx.obj;
socket = ctrl->socket;
}
assert(data != NULL);
ret = rte_malloc_socket(__func__, size, alignment, socket);
if (!ret && size)
rte_errno = ENOMEM;
return ret;
}
/**
* Verbs callback to free a memory.
*
* @param[in] ptr
* A pointer to the memory to free.
* @param[in] data
* A pointer to the callback data.
*/
static void
mlx5_free_verbs_buf(void *ptr, void *data __rte_unused)
{
assert(data != NULL);
rte_free(ptr);
}
/**
* DPDK callback to add udp tunnel port
*
* @param[in] dev
* A pointer to eth_dev
* @param[in] udp_tunnel
* A pointer to udp tunnel
*
* @return
* 0 on valid udp ports and tunnels, -ENOTSUP otherwise.
*/
int
mlx5_udp_tunnel_port_add(struct rte_eth_dev *dev __rte_unused,
struct rte_eth_udp_tunnel *udp_tunnel)
{
assert(udp_tunnel != NULL);
if (udp_tunnel->prot_type == RTE_TUNNEL_TYPE_VXLAN &&
udp_tunnel->udp_port == 4789)
return 0;
if (udp_tunnel->prot_type == RTE_TUNNEL_TYPE_VXLAN_GPE &&
udp_tunnel->udp_port == 4790)
return 0;
return -ENOTSUP;
}
/**
* Initialize process private data structure.
*
* @param dev
* Pointer to Ethernet device structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_proc_priv_init(struct rte_eth_dev *dev)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_proc_priv *ppriv;
size_t ppriv_size;
/*
* UAR register table follows the process private structure. BlueFlame
* registers for Tx queues are stored in the table.
*/
ppriv_size =
sizeof(struct mlx5_proc_priv) + priv->txqs_n * sizeof(void *);
ppriv = rte_malloc_socket("mlx5_proc_priv", ppriv_size,
RTE_CACHE_LINE_SIZE, dev->device->numa_node);
if (!ppriv) {
rte_errno = ENOMEM;
return -rte_errno;
}
ppriv->uar_table_sz = ppriv_size;
dev->process_private = ppriv;
return 0;
}
/**
* Un-initialize process private data structure.
*
* @param dev
* Pointer to Ethernet device structure.
*/
static void
mlx5_proc_priv_uninit(struct rte_eth_dev *dev)
{
if (!dev->process_private)
return;
rte_free(dev->process_private);
dev->process_private = NULL;
}
/**
* DPDK callback to close the device.
*
* Destroy all queues and objects, free memory.
*
* @param dev
* Pointer to Ethernet device structure.
*/
static void
mlx5_dev_close(struct rte_eth_dev *dev)
{
struct mlx5_priv *priv = dev->data->dev_private;
unsigned int i;
int ret;
DRV_LOG(DEBUG, "port %u closing device \"%s\"",
dev->data->port_id,
((priv->sh->ctx != NULL) ? priv->sh->ctx->device->name : ""));
/* In case mlx5_dev_stop() has not been called. */
mlx5_dev_interrupt_handler_uninstall(dev);
mlx5_traffic_disable(dev);
mlx5_flow_flush(dev, NULL);
/* Prevent crashes when queues are still in use. */
dev->rx_pkt_burst = removed_rx_burst;
dev->tx_pkt_burst = removed_tx_burst;
rte_wmb();
/* Disable datapath on secondary process. */
mlx5_mp_req_stop_rxtx(dev);
if (priv->rxqs != NULL) {
/* XXX race condition if mlx5_rx_burst() is still running. */
usleep(1000);
for (i = 0; (i != priv->rxqs_n); ++i)
mlx5_rxq_release(dev, i);
priv->rxqs_n = 0;
priv->rxqs = NULL;
}
if (priv->txqs != NULL) {
/* XXX race condition if mlx5_tx_burst() is still running. */
usleep(1000);
for (i = 0; (i != priv->txqs_n); ++i)
mlx5_txq_release(dev, i);
priv->txqs_n = 0;
priv->txqs = NULL;
}
mlx5_proc_priv_uninit(dev);
mlx5_mprq_free_mp(dev);
mlx5_free_shared_dr(priv);
if (priv->rss_conf.rss_key != NULL)
rte_free(priv->rss_conf.rss_key);
if (priv->reta_idx != NULL)
rte_free(priv->reta_idx);
if (priv->config.vf)
mlx5_nl_mac_addr_flush(dev);
if (priv->nl_socket_route >= 0)
close(priv->nl_socket_route);
if (priv->nl_socket_rdma >= 0)
close(priv->nl_socket_rdma);
if (priv->vmwa_context)
mlx5_vlan_vmwa_exit(priv->vmwa_context);
if (priv->sh) {
/*
* Free the shared context in last turn, because the cleanup
* routines above may use some shared fields, like
* mlx5_nl_mac_addr_flush() uses ibdev_path for retrieveing
* ifindex if Netlink fails.
*/
mlx5_free_shared_ibctx(priv->sh);
priv->sh = NULL;
}
ret = mlx5_hrxq_verify(dev);
if (ret)
DRV_LOG(WARNING, "port %u some hash Rx queue still remain",
dev->data->port_id);
ret = mlx5_ind_table_obj_verify(dev);
if (ret)
DRV_LOG(WARNING, "port %u some indirection table still remain",
dev->data->port_id);
ret = mlx5_rxq_obj_verify(dev);
if (ret)
DRV_LOG(WARNING, "port %u some Rx queue objects still remain",
dev->data->port_id);
ret = mlx5_rxq_verify(dev);
if (ret)
DRV_LOG(WARNING, "port %u some Rx queues still remain",
dev->data->port_id);
ret = mlx5_txq_ibv_verify(dev);
if (ret)
DRV_LOG(WARNING, "port %u some Verbs Tx queue still remain",
dev->data->port_id);
ret = mlx5_txq_verify(dev);
if (ret)
DRV_LOG(WARNING, "port %u some Tx queues still remain",
dev->data->port_id);
ret = mlx5_flow_verify(dev);
if (ret)
DRV_LOG(WARNING, "port %u some flows still remain",
dev->data->port_id);
if (priv->domain_id != RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID) {
unsigned int c = 0;
uint16_t port_id;
RTE_ETH_FOREACH_DEV_OF(port_id, dev->device) {
struct mlx5_priv *opriv =
rte_eth_devices[port_id].data->dev_private;
if (!opriv ||
opriv->domain_id != priv->domain_id ||
&rte_eth_devices[port_id] == dev)
continue;
++c;
}
if (!c)
claim_zero(rte_eth_switch_domain_free(priv->domain_id));
}
memset(priv, 0, sizeof(*priv));
priv->domain_id = RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID;
/*
* Reset mac_addrs to NULL such that it is not freed as part of
* rte_eth_dev_release_port(). mac_addrs is part of dev_private so
* it is freed when dev_private is freed.
*/
dev->data->mac_addrs = NULL;
}
const struct eth_dev_ops mlx5_dev_ops = {
.dev_configure = mlx5_dev_configure,
.dev_start = mlx5_dev_start,
.dev_stop = mlx5_dev_stop,
.dev_set_link_down = mlx5_set_link_down,
.dev_set_link_up = mlx5_set_link_up,
.dev_close = mlx5_dev_close,
.promiscuous_enable = mlx5_promiscuous_enable,
.promiscuous_disable = mlx5_promiscuous_disable,
.allmulticast_enable = mlx5_allmulticast_enable,
.allmulticast_disable = mlx5_allmulticast_disable,
.link_update = mlx5_link_update,
.stats_get = mlx5_stats_get,
.stats_reset = mlx5_stats_reset,
.xstats_get = mlx5_xstats_get,
.xstats_reset = mlx5_xstats_reset,
.xstats_get_names = mlx5_xstats_get_names,
.fw_version_get = mlx5_fw_version_get,
.dev_infos_get = mlx5_dev_infos_get,
.read_clock = mlx5_read_clock,
.dev_supported_ptypes_get = mlx5_dev_supported_ptypes_get,
.vlan_filter_set = mlx5_vlan_filter_set,
.rx_queue_setup = mlx5_rx_queue_setup,
.tx_queue_setup = mlx5_tx_queue_setup,
.rx_queue_release = mlx5_rx_queue_release,
.tx_queue_release = mlx5_tx_queue_release,
.flow_ctrl_get = mlx5_dev_get_flow_ctrl,
.flow_ctrl_set = mlx5_dev_set_flow_ctrl,
.mac_addr_remove = mlx5_mac_addr_remove,
.mac_addr_add = mlx5_mac_addr_add,
.mac_addr_set = mlx5_mac_addr_set,
.set_mc_addr_list = mlx5_set_mc_addr_list,
.mtu_set = mlx5_dev_set_mtu,
.vlan_strip_queue_set = mlx5_vlan_strip_queue_set,
.vlan_offload_set = mlx5_vlan_offload_set,
.reta_update = mlx5_dev_rss_reta_update,
.reta_query = mlx5_dev_rss_reta_query,
.rss_hash_update = mlx5_rss_hash_update,
.rss_hash_conf_get = mlx5_rss_hash_conf_get,
.filter_ctrl = mlx5_dev_filter_ctrl,
.rx_descriptor_status = mlx5_rx_descriptor_status,
.tx_descriptor_status = mlx5_tx_descriptor_status,
.rx_queue_count = mlx5_rx_queue_count,
.rx_queue_intr_enable = mlx5_rx_intr_enable,
.rx_queue_intr_disable = mlx5_rx_intr_disable,
.is_removed = mlx5_is_removed,
.udp_tunnel_port_add = mlx5_udp_tunnel_port_add,
.get_module_info = mlx5_get_module_info,
.get_module_eeprom = mlx5_get_module_eeprom,
};
/* Available operations from secondary process. */
static const struct eth_dev_ops mlx5_dev_sec_ops = {
.stats_get = mlx5_stats_get,
.stats_reset = mlx5_stats_reset,
.xstats_get = mlx5_xstats_get,
.xstats_reset = mlx5_xstats_reset,
.xstats_get_names = mlx5_xstats_get_names,
.fw_version_get = mlx5_fw_version_get,
.dev_infos_get = mlx5_dev_infos_get,
.rx_descriptor_status = mlx5_rx_descriptor_status,
.tx_descriptor_status = mlx5_tx_descriptor_status,
.get_module_info = mlx5_get_module_info,
.get_module_eeprom = mlx5_get_module_eeprom,
};
/* Available operations in flow isolated mode. */
const struct eth_dev_ops mlx5_dev_ops_isolate = {
.dev_configure = mlx5_dev_configure,
.dev_start = mlx5_dev_start,
.dev_stop = mlx5_dev_stop,
.dev_set_link_down = mlx5_set_link_down,
.dev_set_link_up = mlx5_set_link_up,
.dev_close = mlx5_dev_close,
.promiscuous_enable = mlx5_promiscuous_enable,
.promiscuous_disable = mlx5_promiscuous_disable,
.allmulticast_enable = mlx5_allmulticast_enable,
.allmulticast_disable = mlx5_allmulticast_disable,
.link_update = mlx5_link_update,
.stats_get = mlx5_stats_get,
.stats_reset = mlx5_stats_reset,
.xstats_get = mlx5_xstats_get,
.xstats_reset = mlx5_xstats_reset,
.xstats_get_names = mlx5_xstats_get_names,
.fw_version_get = mlx5_fw_version_get,
.dev_infos_get = mlx5_dev_infos_get,
.dev_supported_ptypes_get = mlx5_dev_supported_ptypes_get,
.vlan_filter_set = mlx5_vlan_filter_set,
.rx_queue_setup = mlx5_rx_queue_setup,
.tx_queue_setup = mlx5_tx_queue_setup,
.rx_queue_release = mlx5_rx_queue_release,
.tx_queue_release = mlx5_tx_queue_release,
.flow_ctrl_get = mlx5_dev_get_flow_ctrl,
.flow_ctrl_set = mlx5_dev_set_flow_ctrl,
.mac_addr_remove = mlx5_mac_addr_remove,
.mac_addr_add = mlx5_mac_addr_add,
.mac_addr_set = mlx5_mac_addr_set,
.set_mc_addr_list = mlx5_set_mc_addr_list,
.mtu_set = mlx5_dev_set_mtu,
.vlan_strip_queue_set = mlx5_vlan_strip_queue_set,
.vlan_offload_set = mlx5_vlan_offload_set,
.filter_ctrl = mlx5_dev_filter_ctrl,
.rx_descriptor_status = mlx5_rx_descriptor_status,
.tx_descriptor_status = mlx5_tx_descriptor_status,
.rx_queue_intr_enable = mlx5_rx_intr_enable,
.rx_queue_intr_disable = mlx5_rx_intr_disable,
.is_removed = mlx5_is_removed,
.get_module_info = mlx5_get_module_info,
.get_module_eeprom = mlx5_get_module_eeprom,
};
/**
* Verify and store value for device argument.
*
* @param[in] key
* Key argument to verify.
* @param[in] val
* Value associated with key.
* @param opaque
* User data.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
mlx5_args_check(const char *key, const char *val, void *opaque)
{
struct mlx5_dev_config *config = opaque;
unsigned long tmp;
/* No-op, port representors are processed in mlx5_dev_spawn(). */
if (!strcmp(MLX5_REPRESENTOR, key))
return 0;
errno = 0;
tmp = strtoul(val, NULL, 0);
if (errno) {
rte_errno = errno;
DRV_LOG(WARNING, "%s: \"%s\" is not a valid integer", key, val);
return -rte_errno;
}
if (strcmp(MLX5_RXQ_CQE_COMP_EN, key) == 0) {
config->cqe_comp = !!tmp;
} else if (strcmp(MLX5_RXQ_CQE_PAD_EN, key) == 0) {
config->cqe_pad = !!tmp;
} else if (strcmp(MLX5_RXQ_PKT_PAD_EN, key) == 0) {
config->hw_padding = !!tmp;
} else if (strcmp(MLX5_RX_MPRQ_EN, key) == 0) {
config->mprq.enabled = !!tmp;
} else if (strcmp(MLX5_RX_MPRQ_LOG_STRIDE_NUM, key) == 0) {
config->mprq.stride_num_n = tmp;
} else if (strcmp(MLX5_RX_MPRQ_MAX_MEMCPY_LEN, key) == 0) {
config->mprq.max_memcpy_len = tmp;
} else if (strcmp(MLX5_RXQS_MIN_MPRQ, key) == 0) {
config->mprq.min_rxqs_num = tmp;
} else if (strcmp(MLX5_TXQ_INLINE, key) == 0) {
DRV_LOG(WARNING, "%s: deprecated parameter,"
" converted to txq_inline_max", key);
config->txq_inline_max = tmp;
} else if (strcmp(MLX5_TXQ_INLINE_MAX, key) == 0) {
config->txq_inline_max = tmp;
} else if (strcmp(MLX5_TXQ_INLINE_MIN, key) == 0) {
config->txq_inline_min = tmp;
} else if (strcmp(MLX5_TXQ_INLINE_MPW, key) == 0) {
config->txq_inline_mpw = tmp;
} else if (strcmp(MLX5_TXQS_MIN_INLINE, key) == 0) {
config->txqs_inline = tmp;
} else if (strcmp(MLX5_TXQS_MAX_VEC, key) == 0) {
DRV_LOG(WARNING, "%s: deprecated parameter, ignored", key);
} else if (strcmp(MLX5_TXQ_MPW_EN, key) == 0) {
config->mps = !!tmp;
} else if (strcmp(MLX5_TXQ_MPW_HDR_DSEG_EN, key) == 0) {
DRV_LOG(WARNING, "%s: deprecated parameter, ignored", key);
} else if (strcmp(MLX5_TXQ_MAX_INLINE_LEN, key) == 0) {
DRV_LOG(WARNING, "%s: deprecated parameter,"
" converted to txq_inline_mpw", key);
config->txq_inline_mpw = tmp;
} else if (strcmp(MLX5_TX_VEC_EN, key) == 0) {
DRV_LOG(WARNING, "%s: deprecated parameter, ignored", key);
} else if (strcmp(MLX5_RX_VEC_EN, key) == 0) {
config->rx_vec_en = !!tmp;
} else if (strcmp(MLX5_L3_VXLAN_EN, key) == 0) {
config->l3_vxlan_en = !!tmp;
} else if (strcmp(MLX5_VF_NL_EN, key) == 0) {
config->vf_nl_en = !!tmp;
} else if (strcmp(MLX5_DV_ESW_EN, key) == 0) {
config->dv_esw_en = !!tmp;
} else if (strcmp(MLX5_DV_FLOW_EN, key) == 0) {
config->dv_flow_en = !!tmp;
} else if (strcmp(MLX5_MR_EXT_MEMSEG_EN, key) == 0) {
config->mr_ext_memseg_en = !!tmp;
} else if (strcmp(MLX5_MAX_DUMP_FILES_NUM, key) == 0) {
config->max_dump_files_num = tmp;
} else if (strcmp(MLX5_LRO_TIMEOUT_USEC, key) == 0) {
config->lro.timeout = tmp;
} else {
DRV_LOG(WARNING, "%s: unknown parameter", key);
rte_errno = EINVAL;
return -rte_errno;
}
return 0;
}
/**
* Parse device parameters.
*
* @param config
* Pointer to device configuration structure.
* @param devargs
* Device arguments structure.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
mlx5_args(struct mlx5_dev_config *config, struct rte_devargs *devargs)
{
const char **params = (const char *[]){
MLX5_RXQ_CQE_COMP_EN,
MLX5_RXQ_CQE_PAD_EN,
MLX5_RXQ_PKT_PAD_EN,
MLX5_RX_MPRQ_EN,
MLX5_RX_MPRQ_LOG_STRIDE_NUM,
MLX5_RX_MPRQ_MAX_MEMCPY_LEN,
MLX5_RXQS_MIN_MPRQ,
MLX5_TXQ_INLINE,
MLX5_TXQ_INLINE_MIN,
MLX5_TXQ_INLINE_MAX,
MLX5_TXQ_INLINE_MPW,
MLX5_TXQS_MIN_INLINE,
MLX5_TXQS_MAX_VEC,
MLX5_TXQ_MPW_EN,
MLX5_TXQ_MPW_HDR_DSEG_EN,
MLX5_TXQ_MAX_INLINE_LEN,
MLX5_TX_VEC_EN,
MLX5_RX_VEC_EN,
MLX5_L3_VXLAN_EN,
MLX5_VF_NL_EN,
MLX5_DV_ESW_EN,
MLX5_DV_FLOW_EN,
MLX5_MR_EXT_MEMSEG_EN,
MLX5_REPRESENTOR,
MLX5_MAX_DUMP_FILES_NUM,
MLX5_LRO_TIMEOUT_USEC,
NULL,
};
struct rte_kvargs *kvlist;
int ret = 0;
int i;
if (devargs == NULL)
return 0;
/* Following UGLY cast is done to pass checkpatch. */
kvlist = rte_kvargs_parse(devargs->args, params);
if (kvlist == NULL) {
rte_errno = EINVAL;
return -rte_errno;
}
/* Process parameters. */
for (i = 0; (params[i] != NULL); ++i) {
if (rte_kvargs_count(kvlist, params[i])) {
ret = rte_kvargs_process(kvlist, params[i],
mlx5_args_check, config);
if (ret) {
rte_errno = EINVAL;
rte_kvargs_free(kvlist);
return -rte_errno;
}
}
}
rte_kvargs_free(kvlist);
return 0;
}
static struct rte_pci_driver mlx5_driver;
/**
* PMD global initialization.
*
* Independent from individual device, this function initializes global
* per-PMD data structures distinguishing primary and secondary processes.
* Hence, each initialization is called once per a process.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
mlx5_init_once(void)
{
struct mlx5_shared_data *sd;
struct mlx5_local_data *ld = &mlx5_local_data;
int ret = 0;
if (mlx5_init_shared_data())
return -rte_errno;
sd = mlx5_shared_data;
assert(sd);
rte_spinlock_lock(&sd->lock);
switch (rte_eal_process_type()) {
case RTE_PROC_PRIMARY:
if (sd->init_done)
break;
LIST_INIT(&sd->mem_event_cb_list);
rte_rwlock_init(&sd->mem_event_rwlock);
rte_mem_event_callback_register("MLX5_MEM_EVENT_CB",
mlx5_mr_mem_event_cb, NULL);
ret = mlx5_mp_init_primary();
if (ret)
goto out;
sd->init_done = true;
break;
case RTE_PROC_SECONDARY:
if (ld->init_done)
break;
ret = mlx5_mp_init_secondary();
if (ret)
goto out;
++sd->secondary_cnt;
ld->init_done = true;
break;
default:
break;
}
out:
rte_spinlock_unlock(&sd->lock);
return ret;
}
/**
* Configures the minimal amount of data to inline into WQE
* while sending packets.
*
* - the txq_inline_min has the maximal priority, if this
* key is specified in devargs
* - if DevX is enabled the inline mode is queried from the
* device (HCA attributes and NIC vport context if needed).
* - otherwise L2 mode (18 bytes) is assumed for ConnectX-4/4LX
* and none (0 bytes) for other NICs
*
* @param spawn
* Verbs device parameters (name, port, switch_info) to spawn.
* @param config
* Device configuration parameters.
*/
static void
mlx5_set_min_inline(struct mlx5_dev_spawn_data *spawn,
struct mlx5_dev_config *config)
{
if (config->txq_inline_min != MLX5_ARG_UNSET) {
/* Application defines size of inlined data explicitly. */
switch (spawn->pci_dev->id.device_id) {
case PCI_DEVICE_ID_MELLANOX_CONNECTX4:
case PCI_DEVICE_ID_MELLANOX_CONNECTX4VF:
if (config->txq_inline_min <
(int)MLX5_INLINE_HSIZE_L2) {
DRV_LOG(DEBUG,
"txq_inline_mix aligned to minimal"
" ConnectX-4 required value %d",
(int)MLX5_INLINE_HSIZE_L2);
config->txq_inline_min = MLX5_INLINE_HSIZE_L2;
}
break;
}
goto exit;
}
if (config->hca_attr.eth_net_offloads) {
/* We have DevX enabled, inline mode queried successfully. */
switch (config->hca_attr.wqe_inline_mode) {
case MLX5_CAP_INLINE_MODE_L2:
/* outer L2 header must be inlined. */
config->txq_inline_min = MLX5_INLINE_HSIZE_L2;
goto exit;
case MLX5_CAP_INLINE_MODE_NOT_REQUIRED:
/* No inline data are required by NIC. */
config->txq_inline_min = MLX5_INLINE_HSIZE_NONE;
config->hw_vlan_insert =
config->hca_attr.wqe_vlan_insert;
DRV_LOG(DEBUG, "Tx VLAN insertion is supported");
goto exit;
case MLX5_CAP_INLINE_MODE_VPORT_CONTEXT:
/* inline mode is defined by NIC vport context. */
if (!config->hca_attr.eth_virt)
break;
switch (config->hca_attr.vport_inline_mode) {
case MLX5_INLINE_MODE_NONE:
config->txq_inline_min =
MLX5_INLINE_HSIZE_NONE;
goto exit;
case MLX5_INLINE_MODE_L2:
config->txq_inline_min =
MLX5_INLINE_HSIZE_L2;
goto exit;
case MLX5_INLINE_MODE_IP:
config->txq_inline_min =
MLX5_INLINE_HSIZE_L3;
goto exit;
case MLX5_INLINE_MODE_TCP_UDP:
config->txq_inline_min =
MLX5_INLINE_HSIZE_L4;
goto exit;
case MLX5_INLINE_MODE_INNER_L2:
config->txq_inline_min =
MLX5_INLINE_HSIZE_INNER_L2;
goto exit;
case MLX5_INLINE_MODE_INNER_IP:
config->txq_inline_min =
MLX5_INLINE_HSIZE_INNER_L3;
goto exit;
case MLX5_INLINE_MODE_INNER_TCP_UDP:
config->txq_inline_min =
MLX5_INLINE_HSIZE_INNER_L4;
goto exit;
}
}
}
/*
* We get here if we are unable to deduce
* inline data size with DevX. Try PCI ID
* to determine old NICs.
*/
switch (spawn->pci_dev->id.device_id) {
case PCI_DEVICE_ID_MELLANOX_CONNECTX4:
case PCI_DEVICE_ID_MELLANOX_CONNECTX4VF:
case PCI_DEVICE_ID_MELLANOX_CONNECTX4LX:
case PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF:
config->txq_inline_min = MLX5_INLINE_HSIZE_L2;
config->hw_vlan_insert = 0;
break;
case PCI_DEVICE_ID_MELLANOX_CONNECTX5:
case PCI_DEVICE_ID_MELLANOX_CONNECTX5VF:
case PCI_DEVICE_ID_MELLANOX_CONNECTX5EX:
case PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF:
/*
* These NICs support VLAN insertion from WQE and
* report the wqe_vlan_insert flag. But there is the bug
* and PFC control may be broken, so disable feature.
*/
config->hw_vlan_insert = 0;
config->txq_inline_min = MLX5_INLINE_HSIZE_NONE;
break;
default:
config->txq_inline_min = MLX5_INLINE_HSIZE_NONE;
break;
}
exit:
DRV_LOG(DEBUG, "min tx inline configured: %d", config->txq_inline_min);
}
/**
* Allocate page of door-bells and register it using DevX API.
*
* @param [in] dev
* Pointer to Ethernet device.
*
* @return
* Pointer to new page on success, NULL otherwise.
*/
static struct mlx5_devx_dbr_page *
mlx5_alloc_dbr_page(struct rte_eth_dev *dev)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_devx_dbr_page *page;
/* Allocate space for door-bell page and management data. */
page = rte_calloc_socket(__func__, 1, sizeof(struct mlx5_devx_dbr_page),
RTE_CACHE_LINE_SIZE, dev->device->numa_node);
if (!page) {
DRV_LOG(ERR, "port %u cannot allocate dbr page",
dev->data->port_id);
return NULL;
}
/* Register allocated memory. */
page->umem = mlx5_glue->devx_umem_reg(priv->sh->ctx, page->dbrs,
MLX5_DBR_PAGE_SIZE, 0);
if (!page->umem) {
DRV_LOG(ERR, "port %u cannot umem reg dbr page",
dev->data->port_id);
rte_free(page);
return NULL;
}
return page;
}
/**
* Find the next available door-bell, allocate new page if needed.
*
* @param [in] dev
* Pointer to Ethernet device.
* @param [out] dbr_page
* Door-bell page containing the page data.
*
* @return
* Door-bell address offset on success, a negative error value otherwise.
*/
int64_t
mlx5_get_dbr(struct rte_eth_dev *dev, struct mlx5_devx_dbr_page **dbr_page)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_devx_dbr_page *page = NULL;
uint32_t i, j;
LIST_FOREACH(page, &priv->dbrpgs, next)
if (page->dbr_count < MLX5_DBR_PER_PAGE)
break;
if (!page) { /* No page with free door-bell exists. */
page = mlx5_alloc_dbr_page(dev);
if (!page) /* Failed to allocate new page. */
return (-1);
LIST_INSERT_HEAD(&priv->dbrpgs, page, next);
}
/* Loop to find bitmap part with clear bit. */
for (i = 0;
i < MLX5_DBR_BITMAP_SIZE && page->dbr_bitmap[i] == UINT64_MAX;
i++)
; /* Empty. */
/* Find the first clear bit. */
j = rte_bsf64(~page->dbr_bitmap[i]);
assert(i < (MLX5_DBR_PER_PAGE / 64));
page->dbr_bitmap[i] |= (1 << j);
page->dbr_count++;
*dbr_page = page;
return (((i * 64) + j) * sizeof(uint64_t));
}
/**
* Release a door-bell record.
*
* @param [in] dev
* Pointer to Ethernet device.
* @param [in] umem_id
* UMEM ID of page containing the door-bell record to release.
* @param [in] offset
* Offset of door-bell record in page.
*
* @return
* 0 on success, a negative error value otherwise.
*/
int32_t
mlx5_release_dbr(struct rte_eth_dev *dev, uint32_t umem_id, uint64_t offset)
{
struct mlx5_priv *priv = dev->data->dev_private;
struct mlx5_devx_dbr_page *page = NULL;
int ret = 0;
LIST_FOREACH(page, &priv->dbrpgs, next)
/* Find the page this address belongs to. */
if (page->umem->umem_id == umem_id)
break;
if (!page)
return -EINVAL;
page->dbr_count--;
if (!page->dbr_count) {
/* Page not used, free it and remove from list. */
LIST_REMOVE(page, next);
if (page->umem)
ret = -mlx5_glue->devx_umem_dereg(page->umem);
rte_free(page);
} else {
/* Mark in bitmap that this door-bell is not in use. */
offset /= MLX5_DBR_SIZE;
int i = offset / 64;
int j = offset % 64;
page->dbr_bitmap[i] &= ~(1 << j);
}
return ret;
}
/**
* Spawn an Ethernet device from Verbs information.
*
* @param dpdk_dev
* Backing DPDK device.
* @param spawn
* Verbs device parameters (name, port, switch_info) to spawn.
* @param config
* Device configuration parameters.
*
* @return
* A valid Ethernet device object on success, NULL otherwise and rte_errno
* is set. The following errors are defined:
*
* EBUSY: device is not supposed to be spawned.
* EEXIST: device is already spawned
*/
static struct rte_eth_dev *
mlx5_dev_spawn(struct rte_device *dpdk_dev,
struct mlx5_dev_spawn_data *spawn,
struct mlx5_dev_config config)
{
const struct mlx5_switch_info *switch_info = &spawn->info;
struct mlx5_ibv_shared *sh = NULL;
struct ibv_port_attr port_attr;
struct mlx5dv_context dv_attr = { .comp_mask = 0 };
struct rte_eth_dev *eth_dev = NULL;
struct mlx5_priv *priv = NULL;
int err = 0;
unsigned int hw_padding = 0;
unsigned int mps;
unsigned int cqe_comp;
unsigned int cqe_pad = 0;
unsigned int tunnel_en = 0;
unsigned int mpls_en = 0;
unsigned int swp = 0;
unsigned int mprq = 0;
unsigned int mprq_min_stride_size_n = 0;
unsigned int mprq_max_stride_size_n = 0;
unsigned int mprq_min_stride_num_n = 0;
unsigned int mprq_max_stride_num_n = 0;
struct rte_ether_addr mac;
char name[RTE_ETH_NAME_MAX_LEN];
int own_domain_id = 0;
uint16_t port_id;
unsigned int i;
/* Determine if this port representor is supposed to be spawned. */
if (switch_info->representor && dpdk_dev->devargs) {
struct rte_eth_devargs eth_da;
err = rte_eth_devargs_parse(dpdk_dev->devargs->args, &eth_da);
if (err) {
rte_errno = -err;
DRV_LOG(ERR, "failed to process device arguments: %s",
strerror(rte_errno));
return NULL;
}
for (i = 0; i < eth_da.nb_representor_ports; ++i)
if (eth_da.representor_ports[i] ==
(uint16_t)switch_info->port_name)
break;
if (i == eth_da.nb_representor_ports) {
rte_errno = EBUSY;
return NULL;
}
}
/* Build device name. */
if (!switch_info->representor)
strlcpy(name, dpdk_dev->name, sizeof(name));
else
snprintf(name, sizeof(name), "%s_representor_%u",
dpdk_dev->name, switch_info->port_name);
/* check if the device is already spawned */
if (rte_eth_dev_get_port_by_name(name, &port_id) == 0) {
rte_errno = EEXIST;
return NULL;
}
DRV_LOG(DEBUG, "naming Ethernet device \"%s\"", name);
if (rte_eal_process_type() == RTE_PROC_SECONDARY) {
eth_dev = rte_eth_dev_attach_secondary(name);
if (eth_dev == NULL) {
DRV_LOG(ERR, "can not attach rte ethdev");
rte_errno = ENOMEM;
return NULL;
}
eth_dev->device = dpdk_dev;
eth_dev->dev_ops = &mlx5_dev_sec_ops;
err = mlx5_proc_priv_init(eth_dev);
if (err)
return NULL;
/* Receive command fd from primary process */
err = mlx5_mp_req_verbs_cmd_fd(eth_dev);
if (err < 0)
return NULL;
/* Remap UAR for Tx queues. */
err = mlx5_tx_uar_init_secondary(eth_dev, err);
if (err)
return NULL;
/*
* Ethdev pointer is still required as input since
* the primary device is not accessible from the
* secondary process.
*/
eth_dev->rx_pkt_burst = mlx5_select_rx_function(eth_dev);
eth_dev->tx_pkt_burst = mlx5_select_tx_function(eth_dev);
return eth_dev;
}
sh = mlx5_alloc_shared_ibctx(spawn);
if (!sh)
return NULL;
config.devx = sh->devx;
#ifdef HAVE_MLX5DV_DR_ACTION_DEST_DEVX_TIR
config.dest_tir = 1;
#endif
#ifdef HAVE_IBV_MLX5_MOD_SWP
dv_attr.comp_mask |= MLX5DV_CONTEXT_MASK_SWP;
#endif
/*
* Multi-packet send is supported by ConnectX-4 Lx PF as well
* as all ConnectX-5 devices.
*/
#ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
dv_attr.comp_mask |= MLX5DV_CONTEXT_MASK_TUNNEL_OFFLOADS;
#endif
#ifdef HAVE_IBV_DEVICE_STRIDING_RQ_SUPPORT
dv_attr.comp_mask |= MLX5DV_CONTEXT_MASK_STRIDING_RQ;
#endif
mlx5_glue->dv_query_device(sh->ctx, &dv_attr);
if (dv_attr.flags & MLX5DV_CONTEXT_FLAGS_MPW_ALLOWED) {
if (dv_attr.flags & MLX5DV_CONTEXT_FLAGS_ENHANCED_MPW) {
DRV_LOG(DEBUG, "enhanced MPW is supported");
mps = MLX5_MPW_ENHANCED;
} else {
DRV_LOG(DEBUG, "MPW is supported");
mps = MLX5_MPW;
}
} else {
DRV_LOG(DEBUG, "MPW isn't supported");
mps = MLX5_MPW_DISABLED;
}
#ifdef HAVE_IBV_MLX5_MOD_SWP
if (dv_attr.comp_mask & MLX5DV_CONTEXT_MASK_SWP)
swp = dv_attr.sw_parsing_caps.sw_parsing_offloads;
DRV_LOG(DEBUG, "SWP support: %u", swp);
#endif
config.swp = !!swp;
#ifdef HAVE_IBV_DEVICE_STRIDING_RQ_SUPPORT
if (dv_attr.comp_mask & MLX5DV_CONTEXT_MASK_STRIDING_RQ) {
struct mlx5dv_striding_rq_caps mprq_caps =
dv_attr.striding_rq_caps;
DRV_LOG(DEBUG, "\tmin_single_stride_log_num_of_bytes: %d",
mprq_caps.min_single_stride_log_num_of_bytes);
DRV_LOG(DEBUG, "\tmax_single_stride_log_num_of_bytes: %d",
mprq_caps.max_single_stride_log_num_of_bytes);
DRV_LOG(DEBUG, "\tmin_single_wqe_log_num_of_strides: %d",
mprq_caps.min_single_wqe_log_num_of_strides);
DRV_LOG(DEBUG, "\tmax_single_wqe_log_num_of_strides: %d",
mprq_caps.max_single_wqe_log_num_of_strides);
DRV_LOG(DEBUG, "\tsupported_qpts: %d",
mprq_caps.supported_qpts);
DRV_LOG(DEBUG, "device supports Multi-Packet RQ");
mprq = 1;
mprq_min_stride_size_n =
mprq_caps.min_single_stride_log_num_of_bytes;
mprq_max_stride_size_n =
mprq_caps.max_single_stride_log_num_of_bytes;
mprq_min_stride_num_n =
mprq_caps.min_single_wqe_log_num_of_strides;
mprq_max_stride_num_n =
mprq_caps.max_single_wqe_log_num_of_strides;
config.mprq.stride_num_n = RTE_MAX(MLX5_MPRQ_STRIDE_NUM_N,
mprq_min_stride_num_n);
}
#endif
if (RTE_CACHE_LINE_SIZE == 128 &&
!(dv_attr.flags & MLX5DV_CONTEXT_FLAGS_CQE_128B_COMP))
cqe_comp = 0;
else
cqe_comp = 1;
config.cqe_comp = cqe_comp;
#ifdef HAVE_IBV_MLX5_MOD_CQE_128B_PAD
/* Whether device supports 128B Rx CQE padding. */
cqe_pad = RTE_CACHE_LINE_SIZE == 128 &&
(dv_attr.flags & MLX5DV_CONTEXT_FLAGS_CQE_128B_PAD);
#endif
#ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
if (dv_attr.comp_mask & MLX5DV_CONTEXT_MASK_TUNNEL_OFFLOADS) {
tunnel_en = ((dv_attr.tunnel_offloads_caps &
MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_VXLAN) &&
(dv_attr.tunnel_offloads_caps &
MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_GRE));
}
DRV_LOG(DEBUG, "tunnel offloading is %ssupported",
tunnel_en ? "" : "not ");
#else
DRV_LOG(WARNING,
"tunnel offloading disabled due to old OFED/rdma-core version");
#endif
config.tunnel_en = tunnel_en;
#ifdef HAVE_IBV_DEVICE_MPLS_SUPPORT
mpls_en = ((dv_attr.tunnel_offloads_caps &
MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_CW_MPLS_OVER_GRE) &&
(dv_attr.tunnel_offloads_caps &
MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_CW_MPLS_OVER_UDP));
DRV_LOG(DEBUG, "MPLS over GRE/UDP tunnel offloading is %ssupported",
mpls_en ? "" : "not ");
#else
DRV_LOG(WARNING, "MPLS over GRE/UDP tunnel offloading disabled due to"
" old OFED/rdma-core version or firmware configuration");
#endif
config.mpls_en = mpls_en;
/* Check port status. */
err = mlx5_glue->query_port(sh->ctx, spawn->ibv_port, &port_attr);
if (err) {
DRV_LOG(ERR, "port query failed: %s", strerror(err));
goto error;
}
if (port_attr.link_layer != IBV_LINK_LAYER_ETHERNET) {
DRV_LOG(ERR, "port is not configured in Ethernet mode");
err = EINVAL;
goto error;
}
if (port_attr.state != IBV_PORT_ACTIVE)
DRV_LOG(DEBUG, "port is not active: \"%s\" (%d)",
mlx5_glue->port_state_str(port_attr.state),
port_attr.state);
/* Allocate private eth device data. */
priv = rte_zmalloc("ethdev private structure",
sizeof(*priv),
RTE_CACHE_LINE_SIZE);
if (priv == NULL) {
DRV_LOG(ERR, "priv allocation failure");
err = ENOMEM;
goto error;
}
priv->sh = sh;
priv->ibv_port = spawn->ibv_port;
priv->mtu = RTE_ETHER_MTU;
#ifndef RTE_ARCH_64
/* Initialize UAR access locks for 32bit implementations. */
rte_spinlock_init(&priv->uar_lock_cq);
for (i = 0; i < MLX5_UAR_PAGE_NUM_MAX; i++)
rte_spinlock_init(&priv->uar_lock[i]);
#endif
/* Some internal functions rely on Netlink sockets, open them now. */
priv->nl_socket_rdma = mlx5_nl_init(NETLINK_RDMA);
priv->nl_socket_route = mlx5_nl_init(NETLINK_ROUTE);
priv->nl_sn = 0;
priv->representor = !!switch_info->representor;
priv->master = !!switch_info->master;
priv->domain_id = RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID;
/*
* Currently we support single E-Switch per PF configurations
* only and vport_id field contains the vport index for
* associated VF, which is deduced from representor port name.
* For example, let's have the IB device port 10, it has
* attached network device eth0, which has port name attribute
* pf0vf2, we can deduce the VF number as 2, and set vport index
* as 3 (2+1). This assigning schema should be changed if the
* multiple E-Switch instances per PF configurations or/and PCI
* subfunctions are added.
*/
priv->vport_id = switch_info->representor ?
switch_info->port_name + 1 : -1;
/* representor_id field keeps the unmodified port/VF index. */
priv->representor_id = switch_info->representor ?
switch_info->port_name : -1;
/*
* Look for sibling devices in order to reuse their switch domain
* if any, otherwise allocate one.
*/
RTE_ETH_FOREACH_DEV_OF(port_id, dpdk_dev) {
const struct mlx5_priv *opriv =
rte_eth_devices[port_id].data->dev_private;
if (!opriv ||
opriv->domain_id ==
RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID)
continue;
priv->domain_id = opriv->domain_id;
break;
}
if (priv->domain_id == RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID) {
err = rte_eth_switch_domain_alloc(&priv->domain_id);
if (err) {
err = rte_errno;
DRV_LOG(ERR, "unable to allocate switch domain: %s",
strerror(rte_errno));
goto error;
}
own_domain_id = 1;
}
err = mlx5_args(&config, dpdk_dev->devargs);
if (err) {
err = rte_errno;
DRV_LOG(ERR, "failed to process device arguments: %s",
strerror(rte_errno));
goto error;
}
config.hw_csum = !!(sh->device_attr.device_cap_flags_ex &
IBV_DEVICE_RAW_IP_CSUM);
DRV_LOG(DEBUG, "checksum offloading is %ssupported",
(config.hw_csum ? "" : "not "));
#if !defined(HAVE_IBV_DEVICE_COUNTERS_SET_V42) && \
!defined(HAVE_IBV_DEVICE_COUNTERS_SET_V45)
DRV_LOG(DEBUG, "counters are not supported");
#endif
#ifndef HAVE_IBV_FLOW_DV_SUPPORT
if (config.dv_flow_en) {
DRV_LOG(WARNING, "DV flow is not supported");
config.dv_flow_en = 0;
}
#endif
config.ind_table_max_size =
sh->device_attr.rss_caps.max_rwq_indirection_table_size;
/*
* Remove this check once DPDK supports larger/variable
* indirection tables.
*/
if (config.ind_table_max_size > (unsigned int)ETH_RSS_RETA_SIZE_512)
config.ind_table_max_size = ETH_RSS_RETA_SIZE_512;
DRV_LOG(DEBUG, "maximum Rx indirection table size is %u",
config.ind_table_max_size);
config.hw_vlan_strip = !!(sh->device_attr.raw_packet_caps &
IBV_RAW_PACKET_CAP_CVLAN_STRIPPING);
DRV_LOG(DEBUG, "VLAN stripping is %ssupported",
(config.hw_vlan_strip ? "" : "not "));
config.hw_fcs_strip = !!(sh->device_attr.raw_packet_caps &
IBV_RAW_PACKET_CAP_SCATTER_FCS);
DRV_LOG(DEBUG, "FCS stripping configuration is %ssupported",
(config.hw_fcs_strip ? "" : "not "));
#if defined(HAVE_IBV_WQ_FLAG_RX_END_PADDING)
hw_padding = !!sh->device_attr.rx_pad_end_addr_align;
#elif defined(HAVE_IBV_WQ_FLAGS_PCI_WRITE_END_PADDING)
hw_padding = !!(sh->device_attr.device_cap_flags_ex &
IBV_DEVICE_PCI_WRITE_END_PADDING);
#endif
if (config.hw_padding && !hw_padding) {
DRV_LOG(DEBUG, "Rx end alignment padding isn't supported");
config.hw_padding = 0;
} else if (config.hw_padding) {
DRV_LOG(DEBUG, "Rx end alignment padding is enabled");
}
config.tso = (sh->device_attr.tso_caps.max_tso > 0 &&
(sh->device_attr.tso_caps.supported_qpts &
(1 << IBV_QPT_RAW_PACKET)));
if (config.tso)
config.tso_max_payload_sz = sh->device_attr.tso_caps.max_tso;
/*
* MPW is disabled by default, while the Enhanced MPW is enabled
* by default.
*/
if (config.mps == MLX5_ARG_UNSET)
config.mps = (mps == MLX5_MPW_ENHANCED) ? MLX5_MPW_ENHANCED :
MLX5_MPW_DISABLED;
else
config.mps = config.mps ? mps : MLX5_MPW_DISABLED;
DRV_LOG(INFO, "%sMPS is %s",
config.mps == MLX5_MPW_ENHANCED ? "enhanced " : "",
config.mps != MLX5_MPW_DISABLED ? "enabled" : "disabled");
if (config.cqe_comp && !cqe_comp) {
DRV_LOG(WARNING, "Rx CQE compression isn't supported");
config.cqe_comp = 0;
}
if (config.cqe_pad && !cqe_pad) {
DRV_LOG(WARNING, "Rx CQE padding isn't supported");
config.cqe_pad = 0;
} else if (config.cqe_pad) {
DRV_LOG(INFO, "Rx CQE padding is enabled");
}
if (config.devx) {
priv->counter_fallback = 0;
err = mlx5_devx_cmd_query_hca_attr(sh->ctx, &config.hca_attr);
if (err) {
err = -err;
goto error;
}
if (!config.hca_attr.flow_counters_dump)
priv->counter_fallback = 1;
#ifndef HAVE_IBV_DEVX_ASYNC
priv->counter_fallback = 1;
#endif
if (priv->counter_fallback)
DRV_LOG(INFO, "Use fall-back DV counter management\n");
/* Check for LRO support. */
if (config.dest_tir && config.hca_attr.lro_cap) {
/* TBD check tunnel lro caps. */
config.lro.supported = config.hca_attr.lro_cap;
DRV_LOG(DEBUG, "Device supports LRO");
/*
* If LRO timeout is not configured by application,
* use the minimal supported value.
*/
if (!config.lro.timeout)
config.lro.timeout =
config.hca_attr.lro_timer_supported_periods[0];
DRV_LOG(DEBUG, "LRO session timeout set to %d usec",
config.lro.timeout);
}
}
if (config.mprq.enabled && mprq) {
if (config.mprq.stride_num_n > mprq_max_stride_num_n ||
config.mprq.stride_num_n < mprq_min_stride_num_n) {
config.mprq.stride_num_n =
RTE_MAX(MLX5_MPRQ_STRIDE_NUM_N,
mprq_min_stride_num_n);
DRV_LOG(WARNING,
"the number of strides"
" for Multi-Packet RQ is out of range,"
" setting default value (%u)",
1 << config.mprq.stride_num_n);
}
config.mprq.min_stride_size_n = mprq_min_stride_size_n;
config.mprq.max_stride_size_n = mprq_max_stride_size_n;
} else if (config.mprq.enabled && !mprq) {
DRV_LOG(WARNING, "Multi-Packet RQ isn't supported");
config.mprq.enabled = 0;
}
if (config.max_dump_files_num == 0)
config.max_dump_files_num = 128;
eth_dev = rte_eth_dev_allocate(name);
if (eth_dev == NULL) {
DRV_LOG(ERR, "can not allocate rte ethdev");
err = ENOMEM;
goto error;
}
/* Flag to call rte_eth_dev_release_port() in rte_eth_dev_close(). */
eth_dev->data->dev_flags |= RTE_ETH_DEV_CLOSE_REMOVE;
if (priv->representor) {
eth_dev->data->dev_flags |= RTE_ETH_DEV_REPRESENTOR;
eth_dev->data->representor_id = priv->representor_id;
}
/*
* Store associated network device interface index. This index
* is permanent throughout the lifetime of device. So, we may store
* the ifindex here and use the cached value further.
*/
assert(spawn->ifindex);
priv->if_index = spawn->ifindex;
eth_dev->data->dev_private = priv;
priv->dev_data = eth_dev->data;
eth_dev->data->mac_addrs = priv->mac;
eth_dev->device = dpdk_dev;
/* Configure the first MAC address by default. */
if (mlx5_get_mac(eth_dev, &mac.addr_bytes)) {
DRV_LOG(ERR,
"port %u cannot get MAC address, is mlx5_en"
" loaded? (errno: %s)",
eth_dev->data->port_id, strerror(rte_errno));
err = ENODEV;
goto error;
}
DRV_LOG(INFO,
"port %u MAC address is %02x:%02x:%02x:%02x:%02x:%02x",
eth_dev->data->port_id,
mac.addr_bytes[0], mac.addr_bytes[1],
mac.addr_bytes[2], mac.addr_bytes[3],
mac.addr_bytes[4], mac.addr_bytes[5]);
#ifndef NDEBUG
{
char ifname[IF_NAMESIZE];
if (mlx5_get_ifname(eth_dev, &ifname) == 0)
DRV_LOG(DEBUG, "port %u ifname is \"%s\"",
eth_dev->data->port_id, ifname);
else
DRV_LOG(DEBUG, "port %u ifname is unknown",
eth_dev->data->port_id);
}
#endif
/* Get actual MTU if possible. */
err = mlx5_get_mtu(eth_dev, &priv->mtu);
if (err) {
err = rte_errno;
goto error;
}
DRV_LOG(DEBUG, "port %u MTU is %u", eth_dev->data->port_id,
priv->mtu);
/* Initialize burst functions to prevent crashes before link-up. */
eth_dev->rx_pkt_burst = removed_rx_burst;
eth_dev->tx_pkt_burst = removed_tx_burst;
eth_dev->dev_ops = &mlx5_dev_ops;
/* Register MAC address. */
claim_zero(mlx5_mac_addr_add(eth_dev, &mac, 0, 0));
if (config.vf && config.vf_nl_en)
mlx5_nl_mac_addr_sync(eth_dev);
TAILQ_INIT(&priv->flows);
TAILQ_INIT(&priv->ctrl_flows);
/* Hint libmlx5 to use PMD allocator for data plane resources */
struct mlx5dv_ctx_allocators alctr = {
.alloc = &mlx5_alloc_verbs_buf,
.free = &mlx5_free_verbs_buf,
.data = priv,
};
mlx5_glue->dv_set_context_attr(sh->ctx,
MLX5DV_CTX_ATTR_BUF_ALLOCATORS,
(void *)((uintptr_t)&alctr));
/* Bring Ethernet device up. */
DRV_LOG(DEBUG, "port %u forcing Ethernet interface up",
eth_dev->data->port_id);
mlx5_set_link_up(eth_dev);
/*
* Even though the interrupt handler is not installed yet,
* interrupts will still trigger on the async_fd from
* Verbs context returned by ibv_open_device().
*/
mlx5_link_update(eth_dev, 0);
#ifdef HAVE_MLX5DV_DR_ESWITCH
if (!(config.hca_attr.eswitch_manager && config.dv_flow_en &&
(switch_info->representor || switch_info->master)))
config.dv_esw_en = 0;
#else
config.dv_esw_en = 0;
#endif
/* Detect minimal data bytes to inline. */
mlx5_set_min_inline(spawn, &config);
/* Store device configuration on private structure. */
priv->config = config;
/* Create context for virtual machine VLAN workaround. */
priv->vmwa_context = mlx5_vlan_vmwa_init(eth_dev, spawn->ifindex);
if (config.dv_flow_en) {
err = mlx5_alloc_shared_dr(priv);
if (err)
goto error;
}
/* Supported Verbs flow priority number detection. */
err = mlx5_flow_discover_priorities(eth_dev);
if (err < 0) {
err = -err;
goto error;
}
priv->config.flow_prio = err;
return eth_dev;
error:
if (priv) {
if (priv->sh)
mlx5_free_shared_dr(priv);
if (priv->nl_socket_route >= 0)
close(priv->nl_socket_route);
if (priv->nl_socket_rdma >= 0)
close(priv->nl_socket_rdma);
if (priv->vmwa_context)
mlx5_vlan_vmwa_exit(priv->vmwa_context);
if (own_domain_id)
claim_zero(rte_eth_switch_domain_free(priv->domain_id));
rte_free(priv);
if (eth_dev != NULL)
eth_dev->data->dev_private = NULL;
}
if (eth_dev != NULL) {
/* mac_addrs must not be freed alone because part of dev_private */
eth_dev->data->mac_addrs = NULL;
rte_eth_dev_release_port(eth_dev);
}
if (sh)
mlx5_free_shared_ibctx(sh);
assert(err > 0);
rte_errno = err;
return NULL;
}
/**
* Comparison callback to sort device data.
*
* This is meant to be used with qsort().
*
* @param a[in]
* Pointer to pointer to first data object.
* @param b[in]
* Pointer to pointer to second data object.
*
* @return
* 0 if both objects are equal, less than 0 if the first argument is less
* than the second, greater than 0 otherwise.
*/
static int
mlx5_dev_spawn_data_cmp(const void *a, const void *b)
{
const struct mlx5_switch_info *si_a =
&((const struct mlx5_dev_spawn_data *)a)->info;
const struct mlx5_switch_info *si_b =
&((const struct mlx5_dev_spawn_data *)b)->info;
int ret;
/* Master device first. */
ret = si_b->master - si_a->master;
if (ret)
return ret;
/* Then representor devices. */
ret = si_b->representor - si_a->representor;
if (ret)
return ret;
/* Unidentified devices come last in no specific order. */
if (!si_a->representor)
return 0;
/* Order representors by name. */
return si_a->port_name - si_b->port_name;
}
/**
* DPDK callback to register a PCI device.
*
* This function spawns Ethernet devices out of a given PCI device.
*
* @param[in] pci_drv
* PCI driver structure (mlx5_driver).
* @param[in] pci_dev
* PCI device information.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
struct rte_pci_device *pci_dev)
{
struct ibv_device **ibv_list;
/*
* Number of found IB Devices matching with requested PCI BDF.
* nd != 1 means there are multiple IB devices over the same
* PCI device and we have representors and master.
*/
unsigned int nd = 0;
/*
* Number of found IB device Ports. nd = 1 and np = 1..n means
* we have the single multiport IB device, and there may be
* representors attached to some of found ports.
*/
unsigned int np = 0;
/*
* Number of DPDK ethernet devices to Spawn - either over
* multiple IB devices or multiple ports of single IB device.
* Actually this is the number of iterations to spawn.
*/
unsigned int ns = 0;
struct mlx5_dev_config dev_config;
int ret;
ret = mlx5_init_once();
if (ret) {
DRV_LOG(ERR, "unable to init PMD global data: %s",
strerror(rte_errno));
return -rte_errno;
}
assert(pci_drv == &mlx5_driver);
errno = 0;
ibv_list = mlx5_glue->get_device_list(&ret);
if (!ibv_list) {
rte_errno = errno ? errno : ENOSYS;
DRV_LOG(ERR, "cannot list devices, is ib_uverbs loaded?");
return -rte_errno;
}
/*
* First scan the list of all Infiniband devices to find
* matching ones, gathering into the list.
*/
struct ibv_device *ibv_match[ret + 1];
int nl_route = -1;
int nl_rdma = -1;
unsigned int i;
while (ret-- > 0) {
struct rte_pci_addr pci_addr;
DRV_LOG(DEBUG, "checking device \"%s\"", ibv_list[ret]->name);
if (mlx5_ibv_device_to_pci_addr(ibv_list[ret], &pci_addr))
continue;
if (pci_dev->addr.domain != pci_addr.domain ||
pci_dev->addr.bus != pci_addr.bus ||
pci_dev->addr.devid != pci_addr.devid ||
pci_dev->addr.function != pci_addr.function)
continue;
DRV_LOG(INFO, "PCI information matches for device \"%s\"",
ibv_list[ret]->name);
ibv_match[nd++] = ibv_list[ret];
}
ibv_match[nd] = NULL;
if (!nd) {
/* No device matches, just complain and bail out. */
mlx5_glue->free_device_list(ibv_list);
DRV_LOG(WARNING,
"no Verbs device matches PCI device " PCI_PRI_FMT ","
" are kernel drivers loaded?",
pci_dev->addr.domain, pci_dev->addr.bus,
pci_dev->addr.devid, pci_dev->addr.function);
rte_errno = ENOENT;
ret = -rte_errno;
return ret;
}
nl_route = mlx5_nl_init(NETLINK_ROUTE);
nl_rdma = mlx5_nl_init(NETLINK_RDMA);
if (nd == 1) {
/*
* Found single matching device may have multiple ports.
* Each port may be representor, we have to check the port
* number and check the representors existence.
*/
if (nl_rdma >= 0)
np = mlx5_nl_portnum(nl_rdma, ibv_match[0]->name);
if (!np)
DRV_LOG(WARNING, "can not get IB device \"%s\""
" ports number", ibv_match[0]->name);
}
/*
* Now we can determine the maximal
* amount of devices to be spawned.
*/
struct mlx5_dev_spawn_data list[np ? np : nd];
if (np > 1) {
/*
* Single IB device with multiple ports found,
* it may be E-Switch master device and representors.
* We have to perform identification trough the ports.
*/
assert(nl_rdma >= 0);
assert(ns == 0);
assert(nd == 1);
for (i = 1; i <= np; ++i) {
list[ns].max_port = np;
list[ns].ibv_port = i;
list[ns].ibv_dev = ibv_match[0];
list[ns].eth_dev = NULL;
list[ns].pci_dev = pci_dev;
list[ns].ifindex = mlx5_nl_ifindex
(nl_rdma, list[ns].ibv_dev->name, i);
if (!list[ns].ifindex) {
/*
* No network interface index found for the
* specified port, it means there is no
* representor on this port. It's OK,
* there can be disabled ports, for example
* if sriov_numvfs < sriov_totalvfs.
*/
continue;
}
ret = -1;
if (nl_route >= 0)
ret = mlx5_nl_switch_info
(nl_route,
list[ns].ifindex,
&list[ns].info);
if (ret || (!list[ns].info.representor &&
!list[ns].info.master)) {
/*
* We failed to recognize representors with
* Netlink, let's try to perform the task
* with sysfs.
*/
ret = mlx5_sysfs_switch_info
(list[ns].ifindex,
&list[ns].info);
}
if (!ret && (list[ns].info.representor ^
list[ns].info.master))
ns++;
}
if (!ns) {
DRV_LOG(ERR,
"unable to recognize master/representors"
" on the IB device with multiple ports");
rte_errno = ENOENT;
ret = -rte_errno;
goto exit;
}
} else {
/*
* The existence of several matching entries (nd > 1) means
* port representors have been instantiated. No existing Verbs
* call nor sysfs entries can tell them apart, this can only
* be done through Netlink calls assuming kernel drivers are
* recent enough to support them.
*
* In the event of identification failure through Netlink,
* try again through sysfs, then:
*
* 1. A single IB device matches (nd == 1) with single
* port (np=0/1) and is not a representor, assume
* no switch support.
*
* 2. Otherwise no safe assumptions can be made;
* complain louder and bail out.
*/
np = 1;
for (i = 0; i != nd; ++i) {
memset(&list[ns].info, 0, sizeof(list[ns].info));
list[ns].max_port = 1;
list[ns].ibv_port = 1;
list[ns].ibv_dev = ibv_match[i];
list[ns].eth_dev = NULL;
list[ns].pci_dev = pci_dev;
list[ns].ifindex = 0;
if (nl_rdma >= 0)
list[ns].ifindex = mlx5_nl_ifindex
(nl_rdma, list[ns].ibv_dev->name, 1);
if (!list[ns].ifindex) {
char ifname[IF_NAMESIZE];
/*
* Netlink failed, it may happen with old
* ib_core kernel driver (before 4.16).
* We can assume there is old driver because
* here we are processing single ports IB
* devices. Let's try sysfs to retrieve
* the ifindex. The method works for
* master device only.
*/
if (nd > 1) {
/*
* Multiple devices found, assume
* representors, can not distinguish
* master/representor and retrieve
* ifindex via sysfs.
*/
continue;
}
ret = mlx5_get_master_ifname
(ibv_match[i]->ibdev_path, &ifname);
if (!ret)
list[ns].ifindex =
if_nametoindex(ifname);
if (!list[ns].ifindex) {
/*
* No network interface index found
* for the specified device, it means
* there it is neither representor
* nor master.
*/
continue;
}
}
ret = -1;
if (nl_route >= 0)
ret = mlx5_nl_switch_info
(nl_route,
list[ns].ifindex,
&list[ns].info);
if (ret || (!list[ns].info.representor &&
!list[ns].info.master)) {
/*
* We failed to recognize representors with
* Netlink, let's try to perform the task
* with sysfs.
*/
ret = mlx5_sysfs_switch_info
(list[ns].ifindex,
&list[ns].info);
}
if (!ret && (list[ns].info.representor ^
list[ns].info.master)) {
ns++;
} else if ((nd == 1) &&
!list[ns].info.representor &&
!list[ns].info.master) {
/*
* Single IB device with
* one physical port and
* attached network device.
* May be SRIOV is not enabled
* or there is no representors.
*/
DRV_LOG(INFO, "no E-Switch support detected");
ns++;
break;
}
}
if (!ns) {
DRV_LOG(ERR,
"unable to recognize master/representors"
" on the multiple IB devices");
rte_errno = ENOENT;
ret = -rte_errno;
goto exit;
}
}
assert(ns);
/*
* Sort list to probe devices in natural order for users convenience
* (i.e. master first, then representors from lowest to highest ID).
*/
qsort(list, ns, sizeof(*list), mlx5_dev_spawn_data_cmp);
/* Default configuration. */
dev_config = (struct mlx5_dev_config){
.hw_padding = 0,
.mps = MLX5_ARG_UNSET,
.rx_vec_en = 1,
.txq_inline_max = MLX5_ARG_UNSET,
.txq_inline_min = MLX5_ARG_UNSET,
.txq_inline_mpw = MLX5_ARG_UNSET,
.txqs_inline = MLX5_ARG_UNSET,
.vf_nl_en = 1,
.mr_ext_memseg_en = 1,
.mprq = {
.enabled = 0, /* Disabled by default. */
.stride_num_n = MLX5_MPRQ_STRIDE_NUM_N,
.max_memcpy_len = MLX5_MPRQ_MEMCPY_DEFAULT_LEN,
.min_rxqs_num = MLX5_MPRQ_MIN_RXQS,
},
.dv_esw_en = 1,
};
/* Device specific configuration. */
switch (pci_dev->id.device_id) {
case PCI_DEVICE_ID_MELLANOX_CONNECTX4VF:
case PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF:
case PCI_DEVICE_ID_MELLANOX_CONNECTX5VF:
case PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF:
dev_config.vf = 1;
break;
default:
break;
}
for (i = 0; i != ns; ++i) {
uint32_t restore;
list[i].eth_dev = mlx5_dev_spawn(&pci_dev->device,
&list[i],
dev_config);
if (!list[i].eth_dev) {
if (rte_errno != EBUSY && rte_errno != EEXIST)
break;
/* Device is disabled or already spawned. Ignore it. */
continue;
}
restore = list[i].eth_dev->data->dev_flags;
rte_eth_copy_pci_info(list[i].eth_dev, pci_dev);
/* Restore non-PCI flags cleared by the above call. */
list[i].eth_dev->data->dev_flags |= restore;
rte_eth_dev_probing_finish(list[i].eth_dev);
}
if (i != ns) {
DRV_LOG(ERR,
"probe of PCI device " PCI_PRI_FMT " aborted after"
" encountering an error: %s",
pci_dev->addr.domain, pci_dev->addr.bus,
pci_dev->addr.devid, pci_dev->addr.function,
strerror(rte_errno));
ret = -rte_errno;
/* Roll back. */
while (i--) {
if (!list[i].eth_dev)
continue;
mlx5_dev_close(list[i].eth_dev);
/* mac_addrs must not be freed because in dev_private */
list[i].eth_dev->data->mac_addrs = NULL;
claim_zero(rte_eth_dev_release_port(list[i].eth_dev));
}
/* Restore original error. */
rte_errno = -ret;
} else {
ret = 0;
}
exit:
/*
* Do the routine cleanup:
* - close opened Netlink sockets
* - free the Infiniband device list
*/
if (nl_rdma >= 0)
close(nl_rdma);
if (nl_route >= 0)
close(nl_route);
assert(ibv_list);
mlx5_glue->free_device_list(ibv_list);
return ret;
}
/**
* DPDK callback to remove a PCI device.
*
* This function removes all Ethernet devices belong to a given PCI device.
*
* @param[in] pci_dev
* Pointer to the PCI device.
*
* @return
* 0 on success, the function cannot fail.
*/
static int
mlx5_pci_remove(struct rte_pci_device *pci_dev)
{
uint16_t port_id;
RTE_ETH_FOREACH_DEV_OF(port_id, &pci_dev->device)
rte_eth_dev_close(port_id);
return 0;
}
static const struct rte_pci_id mlx5_pci_id_map[] = {
{
RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
PCI_DEVICE_ID_MELLANOX_CONNECTX4)
},
{
RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
PCI_DEVICE_ID_MELLANOX_CONNECTX4VF)
},
{
RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
PCI_DEVICE_ID_MELLANOX_CONNECTX4LX)
},
{
RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF)
},
{
RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
PCI_DEVICE_ID_MELLANOX_CONNECTX5)
},
{
RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
PCI_DEVICE_ID_MELLANOX_CONNECTX5VF)
},
{
RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
PCI_DEVICE_ID_MELLANOX_CONNECTX5EX)
},
{
RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF)
},
{
RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
PCI_DEVICE_ID_MELLANOX_CONNECTX5BF)
},
{
RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
PCI_DEVICE_ID_MELLANOX_CONNECTX5BFVF)
},
{
RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
PCI_DEVICE_ID_MELLANOX_CONNECTX6)
},
{
RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
PCI_DEVICE_ID_MELLANOX_CONNECTX6VF)
},
{
.vendor_id = 0
}
};
static struct rte_pci_driver mlx5_driver = {
.driver = {
.name = MLX5_DRIVER_NAME
},
.id_table = mlx5_pci_id_map,
.probe = mlx5_pci_probe,
.remove = mlx5_pci_remove,
.dma_map = mlx5_dma_map,
.dma_unmap = mlx5_dma_unmap,
.drv_flags = RTE_PCI_DRV_INTR_LSC | RTE_PCI_DRV_INTR_RMV |
RTE_PCI_DRV_PROBE_AGAIN,
};
#ifdef RTE_IBVERBS_LINK_DLOPEN
/**
* Suffix RTE_EAL_PMD_PATH with "-glue".
*
* This function performs a sanity check on RTE_EAL_PMD_PATH before
* suffixing its last component.
*
* @param buf[out]
* Output buffer, should be large enough otherwise NULL is returned.
* @param size
* Size of @p out.
*
* @return
* Pointer to @p buf or @p NULL in case suffix cannot be appended.
*/
static char *
mlx5_glue_path(char *buf, size_t size)
{
static const char *const bad[] = { "/", ".", "..", NULL };
const char *path = RTE_EAL_PMD_PATH;
size_t len = strlen(path);
size_t off;
int i;
while (len && path[len - 1] == '/')
--len;
for (off = len; off && path[off - 1] != '/'; --off)
;
for (i = 0; bad[i]; ++i)
if (!strncmp(path + off, bad[i], (int)(len - off)))
goto error;
i = snprintf(buf, size, "%.*s-glue", (int)len, path);
if (i == -1 || (size_t)i >= size)
goto error;
return buf;
error:
DRV_LOG(ERR,
"unable to append \"-glue\" to last component of"
" RTE_EAL_PMD_PATH (\"" RTE_EAL_PMD_PATH "\"),"
" please re-configure DPDK");
return NULL;
}
/**
* Initialization routine for run-time dependency on rdma-core.
*/
static int
mlx5_glue_init(void)
{
char glue_path[sizeof(RTE_EAL_PMD_PATH) - 1 + sizeof("-glue")];
const char *path[] = {
/*
* A basic security check is necessary before trusting
* MLX5_GLUE_PATH, which may override RTE_EAL_PMD_PATH.
*/
(geteuid() == getuid() && getegid() == getgid() ?
getenv("MLX5_GLUE_PATH") : NULL),
/*
* When RTE_EAL_PMD_PATH is set, use its glue-suffixed
* variant, otherwise let dlopen() look up libraries on its
* own.
*/
(*RTE_EAL_PMD_PATH ?
mlx5_glue_path(glue_path, sizeof(glue_path)) : ""),
};
unsigned int i = 0;
void *handle = NULL;
void **sym;
const char *dlmsg;
while (!handle && i != RTE_DIM(path)) {
const char *end;
size_t len;
int ret;
if (!path[i]) {
++i;
continue;
}
end = strpbrk(path[i], ":;");
if (!end)
end = path[i] + strlen(path[i]);
len = end - path[i];
ret = 0;
do {
char name[ret + 1];
ret = snprintf(name, sizeof(name), "%.*s%s" MLX5_GLUE,
(int)len, path[i],
(!len || *(end - 1) == '/') ? "" : "/");
if (ret == -1)
break;
if (sizeof(name) != (size_t)ret + 1)
continue;
DRV_LOG(DEBUG, "looking for rdma-core glue as \"%s\"",
name);
handle = dlopen(name, RTLD_LAZY);
break;
} while (1);
path[i] = end + 1;
if (!*end)
++i;
}
if (!handle) {
rte_errno = EINVAL;
dlmsg = dlerror();
if (dlmsg)
DRV_LOG(WARNING, "cannot load glue library: %s", dlmsg);
goto glue_error;
}
sym = dlsym(handle, "mlx5_glue");
if (!sym || !*sym) {
rte_errno = EINVAL;
dlmsg = dlerror();
if (dlmsg)
DRV_LOG(ERR, "cannot resolve glue symbol: %s", dlmsg);
goto glue_error;
}
mlx5_glue = *sym;
return 0;
glue_error:
if (handle)
dlclose(handle);
DRV_LOG(WARNING,
"cannot initialize PMD due to missing run-time dependency on"
" rdma-core libraries (libibverbs, libmlx5)");
return -rte_errno;
}
#endif
/**
* Driver initialization routine.
*/
RTE_INIT(rte_mlx5_pmd_init)
{
/* Initialize driver log type. */
mlx5_logtype = rte_log_register("pmd.net.mlx5");
if (mlx5_logtype >= 0)
rte_log_set_level(mlx5_logtype, RTE_LOG_NOTICE);
/* Build the static tables for Verbs conversion. */
mlx5_set_ptype_table();
mlx5_set_cksum_table();
mlx5_set_swp_types_table();
/*
* RDMAV_HUGEPAGES_SAFE tells ibv_fork_init() we intend to use
* huge pages. Calling ibv_fork_init() during init allows
* applications to use fork() safely for purposes other than
* using this PMD, which is not supported in forked processes.
*/
setenv("RDMAV_HUGEPAGES_SAFE", "1", 1);
/* Match the size of Rx completion entry to the size of a cacheline. */
if (RTE_CACHE_LINE_SIZE == 128)
setenv("MLX5_CQE_SIZE", "128", 0);
/*
* MLX5_DEVICE_FATAL_CLEANUP tells ibv_destroy functions to
* cleanup all the Verbs resources even when the device was removed.
*/
setenv("MLX5_DEVICE_FATAL_CLEANUP", "1", 1);
#ifdef RTE_IBVERBS_LINK_DLOPEN
if (mlx5_glue_init())
return;
assert(mlx5_glue);
#endif
#ifndef NDEBUG
/* Glue structure must not contain any NULL pointers. */
{
unsigned int i;
for (i = 0; i != sizeof(*mlx5_glue) / sizeof(void *); ++i)
assert(((const void *const *)mlx5_glue)[i]);
}
#endif
if (strcmp(mlx5_glue->version, MLX5_GLUE_VERSION)) {
DRV_LOG(ERR,
"rdma-core glue \"%s\" mismatch: \"%s\" is required",
mlx5_glue->version, MLX5_GLUE_VERSION);
return;
}
mlx5_glue->fork_init();
rte_pci_register(&mlx5_driver);
}
RTE_PMD_EXPORT_NAME(net_mlx5, __COUNTER__);
RTE_PMD_REGISTER_PCI_TABLE(net_mlx5, mlx5_pci_id_map);
RTE_PMD_REGISTER_KMOD_DEP(net_mlx5, "* ib_uverbs & mlx5_core & mlx5_ib");
Reference in New Issue View Git Blame Copy Permalink