numam-dpdk/doc/guides/nics/bnxt.rst
Lance Richardson f8168ca0e6 net/bnxt: support thor controller
This commit adds support to the bnxt PMD for devices
based on the BCM57508 "thor" Ethernet controller.

Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
2019-06-13 23:54:30 +09:00

39 lines
1.5 KiB
ReStructuredText

.. SPDX-License-Identifier: BSD-3-Clause
Copyright 2016-2018 Broadcom
BNXT Poll Mode Driver
=====================
The bnxt poll mode library (**librte_pmd_bnxt**) implements support for:
* **Broadcom NetXtreme-C®/NetXtreme-E®/NetXtreme-S®
BCM5730X / BCM574XX / BCM58000 / BCM575XX family of Ethernet Network Controllers**
Adapters based on this family of controllers support standards-compliant Ethernet
operation with link speeds of 10/25/50/100/200Gbps.
Information about the NetXtreme family of adapters can be found in the
`NetXtreme® Brand section
<https://www.broadcom.com/products/ethernet-connectivity/controllers/>`_
of the `Broadcom website <http://www.broadcom.com/>`_.
* **Broadcom StrataGX® BCM5871X Series of Communucations Processors**
These ARM based processors target a broad range of networking applications
including virtual CPE (vCPE) and NFV appliances, 10G service routers and
gateways, control plane processing for Ethernet switches and network
attached storage (NAS).
Information about the StrataGX family of adapters can be found in the
`StrataGX® BCM5871X Series section
<http://www.broadcom.com/products/enterprise-and-network-processors/processors/bcm58712>`_
of the `Broadcom website <http://www.broadcom.com/>`_.
Limitations
-----------
With the current driver, allocated mbufs must be large enough to hold
the entire received frame. If the mbufs are not large enough, the
packets will be dropped. This is most limiting when jumbo frames are
used.