numam-dpdk/examples/l3fwd-vf/main.c
Bruce Richardson 24b4bb8123 hash: rename unused field
The cuckoo hash has a fixed number of entries per bucket, so the
configuration parameter for this is unused. We change this field in the
parameters struct to "reserved" to indicate that there is now no such
parameter value, while at the same time keeping ABI consistency.

Fixes: 48a3991196 ("hash: replace with cuckoo hash implementation")

Suggested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
2015-07-13 19:27:31 +02:00

1092 lines
28 KiB
C

/*-
* BSD LICENSE
*
* Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <inttypes.h>
#include <sys/types.h>
#include <string.h>
#include <sys/queue.h>
#include <stdarg.h>
#include <errno.h>
#include <getopt.h>
#include <signal.h>
#include <rte_common.h>
#include <rte_byteorder.h>
#include <rte_log.h>
#include <rte_memory.h>
#include <rte_memcpy.h>
#include <rte_memzone.h>
#include <rte_eal.h>
#include <rte_per_lcore.h>
#include <rte_launch.h>
#include <rte_atomic.h>
#include <rte_spinlock.h>
#include <rte_cycles.h>
#include <rte_prefetch.h>
#include <rte_lcore.h>
#include <rte_per_lcore.h>
#include <rte_branch_prediction.h>
#include <rte_interrupts.h>
#include <rte_pci.h>
#include <rte_random.h>
#include <rte_debug.h>
#include <rte_ether.h>
#include <rte_ethdev.h>
#include <rte_ring.h>
#include <rte_mempool.h>
#include <rte_mbuf.h>
#include <rte_ip.h>
#include <rte_tcp.h>
#include <rte_udp.h>
#include <rte_string_fns.h>
#define APP_LOOKUP_EXACT_MATCH 0
#define APP_LOOKUP_LPM 1
#define DO_RFC_1812_CHECKS
//#define APP_LOOKUP_METHOD APP_LOOKUP_EXACT_MATCH
#ifndef APP_LOOKUP_METHOD
#define APP_LOOKUP_METHOD APP_LOOKUP_LPM
#endif
#if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
#include <rte_hash.h>
#elif (APP_LOOKUP_METHOD == APP_LOOKUP_LPM)
#include <rte_lpm.h>
#else
#error "APP_LOOKUP_METHOD set to incorrect value"
#endif
#define RTE_LOGTYPE_L3FWD RTE_LOGTYPE_USER1
#define MEMPOOL_CACHE_SIZE 256
/*
* This expression is used to calculate the number of mbufs needed depending on user input, taking
* into account memory for rx and tx hardware rings, cache per lcore and mtable per port per lcore.
* RTE_MAX is used to ensure that NB_MBUF never goes below a minimum value of 8192
*/
#define NB_MBUF RTE_MAX ( \
(nb_ports*nb_rx_queue*RTE_TEST_RX_DESC_DEFAULT + \
nb_ports*nb_lcores*MAX_PKT_BURST + \
nb_ports*n_tx_queue*RTE_TEST_TX_DESC_DEFAULT + \
nb_lcores*MEMPOOL_CACHE_SIZE), \
(unsigned)8192)
/*
* RX and TX Prefetch, Host, and Write-back threshold values should be
* carefully set for optimal performance. Consult the network
* controller's datasheet and supporting DPDK documentation for guidance
* on how these parameters should be set.
*/
#define RX_PTHRESH 8 /**< Default values of RX prefetch threshold reg. */
#define RX_HTHRESH 8 /**< Default values of RX host threshold reg. */
#define RX_WTHRESH 4 /**< Default values of RX write-back threshold reg. */
/*
* These default values are optimized for use with the Intel(R) 82599 10 GbE
* Controller and the DPDK ixgbe PMD. Consider using other values for other
* network controllers and/or network drivers.
*/
#define TX_PTHRESH 36 /**< Default values of TX prefetch threshold reg. */
#define TX_HTHRESH 0 /**< Default values of TX host threshold reg. */
#define TX_WTHRESH 0 /**< Default values of TX write-back threshold reg. */
#define MAX_PKT_BURST 32
#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
#define NB_SOCKETS 8
#define SOCKET0 0
/* Configure how many packets ahead to prefetch, when reading packets */
#define PREFETCH_OFFSET 3
/*
* Configurable number of RX/TX ring descriptors
*/
#define RTE_TEST_RX_DESC_DEFAULT 128
#define RTE_TEST_TX_DESC_DEFAULT 512
static uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT;
static uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;
/* ethernet addresses of ports */
static struct ether_addr ports_eth_addr[RTE_MAX_ETHPORTS];
/* mask of enabled ports */
static uint32_t enabled_port_mask = 0;
static int numa_on = 1; /**< NUMA is enabled by default. */
struct mbuf_table {
uint16_t len;
struct rte_mbuf *m_table[MAX_PKT_BURST];
};
struct lcore_rx_queue {
uint8_t port_id;
uint8_t queue_id;
} __rte_cache_aligned;
#define MAX_RX_QUEUE_PER_LCORE 16
#define MAX_TX_QUEUE_PER_PORT 1
#define MAX_RX_QUEUE_PER_PORT 1
#define MAX_LCORE_PARAMS 1024
struct lcore_params {
uint8_t port_id;
uint8_t queue_id;
uint8_t lcore_id;
} __rte_cache_aligned;
static struct lcore_params lcore_params_array[MAX_LCORE_PARAMS];
static struct lcore_params lcore_params_array_default[] = {
{0, 0, 2},
{0, 1, 2},
{0, 2, 2},
{1, 0, 2},
{1, 1, 2},
{1, 2, 2},
{2, 0, 2},
{3, 0, 3},
{3, 1, 3},
};
static struct lcore_params * lcore_params = lcore_params_array_default;
static uint16_t nb_lcore_params = sizeof(lcore_params_array_default) /
sizeof(lcore_params_array_default[0]);
static struct rte_eth_conf port_conf = {
.rxmode = {
.mq_mode = ETH_MQ_RX_RSS,
.max_rx_pkt_len = ETHER_MAX_LEN,
.split_hdr_size = 0,
.header_split = 0, /**< Header Split disabled */
.hw_ip_checksum = 1, /**< IP checksum offload enabled */
.hw_vlan_filter = 0, /**< VLAN filtering disabled */
.jumbo_frame = 0, /**< Jumbo Frame Support disabled */
.hw_strip_crc = 0, /**< CRC stripped by hardware */
},
.rx_adv_conf = {
.rss_conf = {
.rss_key = NULL,
.rss_hf = ETH_RSS_IP,
},
},
.txmode = {
.mq_mode = ETH_MQ_TX_NONE,
},
};
static struct rte_mempool * pktmbuf_pool[NB_SOCKETS];
#if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
#ifdef RTE_MACHINE_CPUFLAG_SSE4_2
#include <rte_hash_crc.h>
#define DEFAULT_HASH_FUNC rte_hash_crc
#else
#include <rte_jhash.h>
#define DEFAULT_HASH_FUNC rte_jhash
#endif
struct ipv4_5tuple {
uint32_t ip_dst;
uint32_t ip_src;
uint16_t port_dst;
uint16_t port_src;
uint8_t proto;
} __attribute__((__packed__));
struct l3fwd_route {
struct ipv4_5tuple key;
uint8_t if_out;
};
static struct l3fwd_route l3fwd_route_array[] = {
{{IPv4(100,10,0,1), IPv4(200,10,0,1), 101, 11, IPPROTO_TCP}, 0},
{{IPv4(100,20,0,2), IPv4(200,20,0,2), 102, 12, IPPROTO_TCP}, 1},
{{IPv4(100,30,0,3), IPv4(200,30,0,3), 103, 13, IPPROTO_TCP}, 2},
{{IPv4(100,40,0,4), IPv4(200,40,0,4), 104, 14, IPPROTO_TCP}, 3},
};
typedef struct rte_hash lookup_struct_t;
static lookup_struct_t *l3fwd_lookup_struct[NB_SOCKETS];
#define L3FWD_HASH_ENTRIES 1024
struct rte_hash_parameters l3fwd_hash_params = {
.name = "l3fwd_hash_0",
.entries = L3FWD_HASH_ENTRIES,
.key_len = sizeof(struct ipv4_5tuple),
.hash_func = DEFAULT_HASH_FUNC,
.hash_func_init_val = 0,
.socket_id = SOCKET0,
};
#define L3FWD_NUM_ROUTES \
(sizeof(l3fwd_route_array) / sizeof(l3fwd_route_array[0]))
static uint8_t l3fwd_out_if[L3FWD_HASH_ENTRIES] __rte_cache_aligned;
#endif
#if (APP_LOOKUP_METHOD == APP_LOOKUP_LPM)
struct l3fwd_route {
uint32_t ip;
uint8_t depth;
uint8_t if_out;
};
static struct l3fwd_route l3fwd_route_array[] = {
{IPv4(1,1,1,0), 24, 0},
{IPv4(2,1,1,0), 24, 1},
{IPv4(3,1,1,0), 24, 2},
{IPv4(4,1,1,0), 24, 3},
{IPv4(5,1,1,0), 24, 4},
{IPv4(6,1,1,0), 24, 5},
{IPv4(7,1,1,0), 24, 6},
{IPv4(8,1,1,0), 24, 7},
};
#define L3FWD_NUM_ROUTES \
(sizeof(l3fwd_route_array) / sizeof(l3fwd_route_array[0]))
#define L3FWD_LPM_MAX_RULES 1024
typedef struct rte_lpm lookup_struct_t;
static lookup_struct_t *l3fwd_lookup_struct[NB_SOCKETS];
#endif
struct lcore_conf {
uint16_t n_rx_queue;
struct lcore_rx_queue rx_queue_list[MAX_RX_QUEUE_PER_LCORE];
uint16_t tx_queue_id;
struct mbuf_table tx_mbufs[RTE_MAX_ETHPORTS];
lookup_struct_t * lookup_struct;
} __rte_cache_aligned;
static struct lcore_conf lcore_conf[RTE_MAX_LCORE];
static rte_spinlock_t spinlock_conf[RTE_MAX_ETHPORTS] = {RTE_SPINLOCK_INITIALIZER};
/* Send burst of packets on an output interface */
static inline int
send_burst(struct lcore_conf *qconf, uint16_t n, uint8_t port)
{
struct rte_mbuf **m_table;
int ret;
uint16_t queueid;
queueid = qconf->tx_queue_id;
m_table = (struct rte_mbuf **)qconf->tx_mbufs[port].m_table;
rte_spinlock_lock(&spinlock_conf[port]);
ret = rte_eth_tx_burst(port, queueid, m_table, n);
rte_spinlock_unlock(&spinlock_conf[port]);
if (unlikely(ret < n)) {
do {
rte_pktmbuf_free(m_table[ret]);
} while (++ret < n);
}
return 0;
}
/* Enqueue a single packet, and send burst if queue is filled */
static inline int
send_single_packet(struct rte_mbuf *m, uint8_t port)
{
uint32_t lcore_id;
uint16_t len;
struct lcore_conf *qconf;
lcore_id = rte_lcore_id();
qconf = &lcore_conf[lcore_id];
len = qconf->tx_mbufs[port].len;
qconf->tx_mbufs[port].m_table[len] = m;
len++;
/* enough pkts to be sent */
if (unlikely(len == MAX_PKT_BURST)) {
send_burst(qconf, MAX_PKT_BURST, port);
len = 0;
}
qconf->tx_mbufs[port].len = len;
return 0;
}
#ifdef DO_RFC_1812_CHECKS
static inline int
is_valid_ipv4_pkt(struct ipv4_hdr *pkt, uint32_t link_len)
{
/* From http://www.rfc-editor.org/rfc/rfc1812.txt section 5.2.2 */
/*
* 1. The packet length reported by the Link Layer must be large
* enough to hold the minimum length legal IP datagram (20 bytes).
*/
if (link_len < sizeof(struct ipv4_hdr))
return -1;
/* 2. The IP checksum must be correct. */
/* this is checked in H/W */
/*
* 3. The IP version number must be 4. If the version number is not 4
* then the packet may be another version of IP, such as IPng or
* ST-II.
*/
if (((pkt->version_ihl) >> 4) != 4)
return -3;
/*
* 4. The IP header length field must be large enough to hold the
* minimum length legal IP datagram (20 bytes = 5 words).
*/
if ((pkt->version_ihl & 0xf) < 5)
return -4;
/*
* 5. The IP total length field must be large enough to hold the IP
* datagram header, whose length is specified in the IP header length
* field.
*/
if (rte_cpu_to_be_16(pkt->total_length) < sizeof(struct ipv4_hdr))
return -5;
return 0;
}
#endif
#if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
static void
print_key(struct ipv4_5tuple key)
{
printf("IP dst = %08x, IP src = %08x, port dst = %d, port src = %d, proto = %d\n",
(unsigned)key.ip_dst, (unsigned)key.ip_src, key.port_dst, key.port_src, key.proto);
}
static inline uint8_t
get_dst_port(struct ipv4_hdr *ipv4_hdr, uint8_t portid, lookup_struct_t * l3fwd_lookup_struct)
{
struct ipv4_5tuple key;
struct tcp_hdr *tcp;
struct udp_hdr *udp;
int ret = 0;
key.ip_dst = rte_be_to_cpu_32(ipv4_hdr->dst_addr);
key.ip_src = rte_be_to_cpu_32(ipv4_hdr->src_addr);
key.proto = ipv4_hdr->next_proto_id;
switch (ipv4_hdr->next_proto_id) {
case IPPROTO_TCP:
tcp = (struct tcp_hdr *)((unsigned char *) ipv4_hdr +
sizeof(struct ipv4_hdr));
key.port_dst = rte_be_to_cpu_16(tcp->dst_port);
key.port_src = rte_be_to_cpu_16(tcp->src_port);
break;
case IPPROTO_UDP:
udp = (struct udp_hdr *)((unsigned char *) ipv4_hdr +
sizeof(struct ipv4_hdr));
key.port_dst = rte_be_to_cpu_16(udp->dst_port);
key.port_src = rte_be_to_cpu_16(udp->src_port);
break;
default:
key.port_dst = 0;
key.port_src = 0;
}
/* Find destination port */
ret = rte_hash_lookup(l3fwd_lookup_struct, (const void *)&key);
return (uint8_t)((ret < 0)? portid : l3fwd_out_if[ret]);
}
#endif
#if (APP_LOOKUP_METHOD == APP_LOOKUP_LPM)
static inline uint8_t
get_dst_port(struct ipv4_hdr *ipv4_hdr, uint8_t portid, lookup_struct_t * l3fwd_lookup_struct)
{
uint8_t next_hop;
return (uint8_t) ((rte_lpm_lookup(l3fwd_lookup_struct,
rte_be_to_cpu_32(ipv4_hdr->dst_addr), &next_hop) == 0)?
next_hop : portid);
}
#endif
static inline void
l3fwd_simple_forward(struct rte_mbuf *m, uint8_t portid, lookup_struct_t * l3fwd_lookup_struct)
{
struct ether_hdr *eth_hdr;
struct ipv4_hdr *ipv4_hdr;
void *tmp;
uint8_t dst_port;
eth_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
ipv4_hdr = rte_pktmbuf_mtod_offset(m, struct ipv4_hdr *,
sizeof(struct ether_hdr));
#ifdef DO_RFC_1812_CHECKS
/* Check to make sure the packet is valid (RFC1812) */
if (is_valid_ipv4_pkt(ipv4_hdr, m->pkt_len) < 0) {
rte_pktmbuf_free(m);
return;
}
#endif
dst_port = get_dst_port(ipv4_hdr, portid, l3fwd_lookup_struct);
if (dst_port >= RTE_MAX_ETHPORTS || (enabled_port_mask & 1 << dst_port) == 0)
dst_port = portid;
/* 02:00:00:00:00:xx */
tmp = &eth_hdr->d_addr.addr_bytes[0];
*((uint64_t *)tmp) = 0x000000000002 + ((uint64_t)dst_port << 40);
#ifdef DO_RFC_1812_CHECKS
/* Update time to live and header checksum */
--(ipv4_hdr->time_to_live);
++(ipv4_hdr->hdr_checksum);
#endif
/* src addr */
ether_addr_copy(&ports_eth_addr[dst_port], &eth_hdr->s_addr);
send_single_packet(m, dst_port);
}
/* main processing loop */
static int
main_loop(__attribute__((unused)) void *dummy)
{
struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
unsigned lcore_id;
uint64_t prev_tsc, diff_tsc, cur_tsc;
int i, j, nb_rx;
uint8_t portid, queueid;
struct lcore_conf *qconf;
const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S * BURST_TX_DRAIN_US;
prev_tsc = 0;
lcore_id = rte_lcore_id();
qconf = &lcore_conf[lcore_id];
if (qconf->n_rx_queue == 0) {
RTE_LOG(INFO, L3FWD, "lcore %u has nothing to do\n", lcore_id);
return 0;
}
RTE_LOG(INFO, L3FWD, "entering main loop on lcore %u\n", lcore_id);
for (i = 0; i < qconf->n_rx_queue; i++) {
portid = qconf->rx_queue_list[i].port_id;
queueid = qconf->rx_queue_list[i].queue_id;
RTE_LOG(INFO, L3FWD, " -- lcoreid=%u portid=%hhu rxqueueid=%hhu\n", lcore_id,
portid, queueid);
}
while (1) {
cur_tsc = rte_rdtsc();
/*
* TX burst queue drain
*/
diff_tsc = cur_tsc - prev_tsc;
if (unlikely(diff_tsc > drain_tsc)) {
/*
* This could be optimized (use queueid instead of
* portid), but it is not called so often
*/
for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++) {
if (qconf->tx_mbufs[portid].len == 0)
continue;
send_burst(&lcore_conf[lcore_id],
qconf->tx_mbufs[portid].len,
portid);
qconf->tx_mbufs[portid].len = 0;
}
prev_tsc = cur_tsc;
}
/*
* Read packet from RX queues
*/
for (i = 0; i < qconf->n_rx_queue; ++i) {
portid = qconf->rx_queue_list[i].port_id;
queueid = qconf->rx_queue_list[i].queue_id;
nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst, MAX_PKT_BURST);
/* Prefetch first packets */
for (j = 0; j < PREFETCH_OFFSET && j < nb_rx; j++) {
rte_prefetch0(rte_pktmbuf_mtod(
pkts_burst[j], void *));
}
/* Prefetch and forward already prefetched packets */
for (j = 0; j < (nb_rx - PREFETCH_OFFSET); j++) {
rte_prefetch0(rte_pktmbuf_mtod(pkts_burst[
j + PREFETCH_OFFSET], void *));
l3fwd_simple_forward(pkts_burst[j], portid, qconf->lookup_struct);
}
/* Forward remaining prefetched packets */
for (; j < nb_rx; j++) {
l3fwd_simple_forward(pkts_burst[j], portid, qconf->lookup_struct);
}
}
}
}
static int
check_lcore_params(void)
{
uint8_t queue, lcore;
uint16_t i;
int socketid;
for (i = 0; i < nb_lcore_params; ++i) {
queue = lcore_params[i].queue_id;
if (queue >= MAX_RX_QUEUE_PER_PORT) {
printf("invalid queue number: %hhu\n", queue);
return -1;
}
lcore = lcore_params[i].lcore_id;
if (!rte_lcore_is_enabled(lcore)) {
printf("error: lcore %hhu is not enabled in lcore mask\n", lcore);
return -1;
}
if ((socketid = rte_lcore_to_socket_id(lcore) != 0) &&
(numa_on == 0)) {
printf("warning: lcore %hhu is on socket %d with numa off \n",
lcore, socketid);
}
}
return 0;
}
static int
check_port_config(const unsigned nb_ports)
{
unsigned portid;
uint16_t i;
for (i = 0; i < nb_lcore_params; ++i) {
portid = lcore_params[i].port_id;
if ((enabled_port_mask & (1 << portid)) == 0) {
printf("port %u is not enabled in port mask\n", portid);
return -1;
}
if (portid >= nb_ports) {
printf("port %u is not present on the board\n", portid);
return -1;
}
}
return 0;
}
static uint8_t
get_port_n_rx_queues(const uint8_t port)
{
int queue = -1;
uint16_t i;
for (i = 0; i < nb_lcore_params; ++i) {
if (lcore_params[i].port_id == port && lcore_params[i].queue_id > queue)
queue = lcore_params[i].queue_id;
}
return (uint8_t)(++queue);
}
static int
init_lcore_rx_queues(void)
{
uint16_t i, nb_rx_queue;
uint8_t lcore;
for (i = 0; i < nb_lcore_params; ++i) {
lcore = lcore_params[i].lcore_id;
nb_rx_queue = lcore_conf[lcore].n_rx_queue;
if (nb_rx_queue >= MAX_RX_QUEUE_PER_LCORE) {
printf("error: too many queues (%u) for lcore: %u\n",
(unsigned)nb_rx_queue + 1, (unsigned)lcore);
return -1;
} else {
lcore_conf[lcore].rx_queue_list[nb_rx_queue].port_id =
lcore_params[i].port_id;
lcore_conf[lcore].rx_queue_list[nb_rx_queue].queue_id =
lcore_params[i].queue_id;
lcore_conf[lcore].n_rx_queue++;
}
}
return 0;
}
/* display usage */
static void
print_usage(const char *prgname)
{
printf ("%s [EAL options] -- -p PORTMASK"
" [--config (port,queue,lcore)[,(port,queue,lcore]]\n"
" -p PORTMASK: hexadecimal bitmask of ports to configure\n"
" --config (port,queue,lcore): rx queues configuration\n"
" --no-numa: optional, disable numa awareness\n",
prgname);
}
/* Custom handling of signals to handle process terminal */
static void
signal_handler(int signum)
{
uint8_t portid;
uint8_t nb_ports = rte_eth_dev_count();
/* When we receive a SIGINT signal */
if (signum == SIGINT) {
for (portid = 0; portid < nb_ports; portid++) {
/* skip ports that are not enabled */
if ((enabled_port_mask & (1 << portid)) == 0)
continue;
rte_eth_dev_close(portid);
}
}
rte_exit(EXIT_SUCCESS, "\n User forced exit\n");
}
static int
parse_portmask(const char *portmask)
{
char *end = NULL;
unsigned long pm;
/* parse hexadecimal string */
pm = strtoul(portmask, &end, 16);
if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
return -1;
if (pm == 0)
return -1;
return pm;
}
static int
parse_config(const char *q_arg)
{
char s[256];
const char *p, *p0 = q_arg;
char *end;
enum fieldnames {
FLD_PORT = 0,
FLD_QUEUE,
FLD_LCORE,
_NUM_FLD
};
unsigned long int_fld[_NUM_FLD];
char *str_fld[_NUM_FLD];
int i;
unsigned size;
nb_lcore_params = 0;
while ((p = strchr(p0,'(')) != NULL) {
++p;
if((p0 = strchr(p,')')) == NULL)
return -1;
size = p0 - p;
if(size >= sizeof(s))
return -1;
snprintf(s, sizeof(s), "%.*s", size, p);
if (rte_strsplit(s, sizeof(s), str_fld, _NUM_FLD, ',') != _NUM_FLD)
return -1;
for (i = 0; i < _NUM_FLD; i++){
errno = 0;
int_fld[i] = strtoul(str_fld[i], &end, 0);
if (errno != 0 || end == str_fld[i] || int_fld[i] > 255)
return -1;
}
if (nb_lcore_params >= MAX_LCORE_PARAMS) {
printf("exceeded max number of lcore params: %hu\n",
nb_lcore_params);
return -1;
}
lcore_params_array[nb_lcore_params].port_id = (uint8_t)int_fld[FLD_PORT];
lcore_params_array[nb_lcore_params].queue_id = (uint8_t)int_fld[FLD_QUEUE];
lcore_params_array[nb_lcore_params].lcore_id = (uint8_t)int_fld[FLD_LCORE];
++nb_lcore_params;
}
lcore_params = lcore_params_array;
return 0;
}
/* Parse the argument given in the command line of the application */
static int
parse_args(int argc, char **argv)
{
int opt, ret;
char **argvopt;
int option_index;
char *prgname = argv[0];
static struct option lgopts[] = {
{"config", 1, 0, 0},
{"no-numa", 0, 0, 0},
{NULL, 0, 0, 0}
};
argvopt = argv;
while ((opt = getopt_long(argc, argvopt, "p:",
lgopts, &option_index)) != EOF) {
switch (opt) {
/* portmask */
case 'p':
enabled_port_mask = parse_portmask(optarg);
if (enabled_port_mask == 0) {
printf("invalid portmask\n");
print_usage(prgname);
return -1;
}
break;
/* long options */
case 0:
if (!strcmp(lgopts[option_index].name, "config")) {
ret = parse_config(optarg);
if (ret) {
printf("invalid config\n");
print_usage(prgname);
return -1;
}
}
if (!strcmp(lgopts[option_index].name, "no-numa")) {
printf("numa is disabled \n");
numa_on = 0;
}
break;
default:
print_usage(prgname);
return -1;
}
}
if (optind >= 0)
argv[optind-1] = prgname;
ret = optind-1;
optind = 0; /* reset getopt lib */
return ret;
}
static void
print_ethaddr(const char *name, const struct ether_addr *eth_addr)
{
char buf[ETHER_ADDR_FMT_SIZE];
ether_format_addr(buf, ETHER_ADDR_FMT_SIZE, eth_addr);
printf("%s%s", name, buf);
}
#if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
static void
setup_hash(int socketid)
{
unsigned i;
int ret;
char s[64];
/* create hashes */
snprintf(s, sizeof(s), "l3fwd_hash_%d", socketid);
l3fwd_hash_params.name = s;
l3fwd_hash_params.socket_id = socketid;
l3fwd_lookup_struct[socketid] = rte_hash_create(&l3fwd_hash_params);
if (l3fwd_lookup_struct[socketid] == NULL)
rte_exit(EXIT_FAILURE, "Unable to create the l3fwd hash on "
"socket %d\n", socketid);
/* populate the hash */
for (i = 0; i < L3FWD_NUM_ROUTES; i++) {
ret = rte_hash_add_key (l3fwd_lookup_struct[socketid],
(void *) &l3fwd_route_array[i].key);
if (ret < 0) {
rte_exit(EXIT_FAILURE, "Unable to add entry %u to the"
"l3fwd hash on socket %d\n", i, socketid);
}
l3fwd_out_if[ret] = l3fwd_route_array[i].if_out;
printf("Hash: Adding key\n");
print_key(l3fwd_route_array[i].key);
}
}
#endif
#if (APP_LOOKUP_METHOD == APP_LOOKUP_LPM)
static void
setup_lpm(int socketid)
{
unsigned i;
int ret;
char s[64];
/* create the LPM table */
snprintf(s, sizeof(s), "L3FWD_LPM_%d", socketid);
l3fwd_lookup_struct[socketid] = rte_lpm_create(s, socketid,
L3FWD_LPM_MAX_RULES, 0);
if (l3fwd_lookup_struct[socketid] == NULL)
rte_exit(EXIT_FAILURE, "Unable to create the l3fwd LPM table"
" on socket %d\n", socketid);
/* populate the LPM table */
for (i = 0; i < L3FWD_NUM_ROUTES; i++) {
ret = rte_lpm_add(l3fwd_lookup_struct[socketid],
l3fwd_route_array[i].ip,
l3fwd_route_array[i].depth,
l3fwd_route_array[i].if_out);
if (ret < 0) {
rte_exit(EXIT_FAILURE, "Unable to add entry %u to the "
"l3fwd LPM table on socket %d\n",
i, socketid);
}
printf("LPM: Adding route 0x%08x / %d (%d)\n",
(unsigned)l3fwd_route_array[i].ip,
l3fwd_route_array[i].depth,
l3fwd_route_array[i].if_out);
}
}
#endif
static int
init_mem(unsigned nb_mbuf)
{
struct lcore_conf *qconf;
int socketid;
unsigned lcore_id;
char s[64];
for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
if (rte_lcore_is_enabled(lcore_id) == 0)
continue;
if (numa_on)
socketid = rte_lcore_to_socket_id(lcore_id);
else
socketid = 0;
if (socketid >= NB_SOCKETS) {
rte_exit(EXIT_FAILURE, "Socket %d of lcore %u is out of range %d\n",
socketid, lcore_id, NB_SOCKETS);
}
if (pktmbuf_pool[socketid] == NULL) {
snprintf(s, sizeof(s), "mbuf_pool_%d", socketid);
pktmbuf_pool[socketid] = rte_pktmbuf_pool_create(s,
nb_mbuf, MEMPOOL_CACHE_SIZE, 0,
RTE_MBUF_DEFAULT_BUF_SIZE, socketid);
if (pktmbuf_pool[socketid] == NULL)
rte_exit(EXIT_FAILURE, "Cannot init mbuf pool on socket %d\n", socketid);
else
printf("Allocated mbuf pool on socket %d\n", socketid);
#if (APP_LOOKUP_METHOD == APP_LOOKUP_LPM)
setup_lpm(socketid);
#else
setup_hash(socketid);
#endif
}
qconf = &lcore_conf[lcore_id];
qconf->lookup_struct = l3fwd_lookup_struct[socketid];
}
return 0;
}
int
main(int argc, char **argv)
{
struct lcore_conf *qconf;
struct rte_eth_dev_info dev_info;
struct rte_eth_txconf *txconf;
int ret;
unsigned nb_ports;
uint16_t queueid;
unsigned lcore_id;
uint32_t nb_lcores;
uint16_t n_tx_queue;
uint8_t portid, nb_rx_queue, queue, socketid;
signal(SIGINT, signal_handler);
/* init EAL */
ret = rte_eal_init(argc, argv);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Invalid EAL parameters\n");
argc -= ret;
argv += ret;
/* parse application arguments (after the EAL ones) */
ret = parse_args(argc, argv);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Invalid L3FWD-VF parameters\n");
if (check_lcore_params() < 0)
rte_exit(EXIT_FAILURE, "check_lcore_params failed\n");
ret = init_lcore_rx_queues();
if (ret < 0)
rte_exit(EXIT_FAILURE, "init_lcore_rx_queues failed\n");
nb_ports = rte_eth_dev_count();
if (nb_ports > RTE_MAX_ETHPORTS)
nb_ports = RTE_MAX_ETHPORTS;
if (check_port_config(nb_ports) < 0)
rte_exit(EXIT_FAILURE, "check_port_config failed\n");
nb_lcores = rte_lcore_count();
/* initialize all ports */
for (portid = 0; portid < nb_ports; portid++) {
/* skip ports that are not enabled */
if ((enabled_port_mask & (1 << portid)) == 0) {
printf("\nSkipping disabled port %d\n", portid);
continue;
}
/* init port */
printf("Initializing port %d ... ", portid );
fflush(stdout);
/* must always equal(=1) */
nb_rx_queue = get_port_n_rx_queues(portid);
n_tx_queue = MAX_TX_QUEUE_PER_PORT;
printf("Creating queues: nb_rxq=%d nb_txq=%u... ",
nb_rx_queue, (unsigned)1 );
ret = rte_eth_dev_configure(portid, nb_rx_queue, n_tx_queue, &port_conf);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Cannot configure device: err=%d, port=%d\n",
ret, portid);
rte_eth_macaddr_get(portid, &ports_eth_addr[portid]);
print_ethaddr(" Address:", &ports_eth_addr[portid]);
printf(", ");
ret = init_mem(NB_MBUF);
if (ret < 0)
rte_exit(EXIT_FAILURE, "init_mem failed\n");
/* init one TX queue */
socketid = (uint8_t)rte_lcore_to_socket_id(rte_get_master_lcore());
printf("txq=%d,%d,%d ", portid, 0, socketid);
fflush(stdout);
rte_eth_dev_info_get(portid, &dev_info);
txconf = &dev_info.default_txconf;
if (port_conf.rxmode.jumbo_frame)
txconf->txq_flags = 0;
ret = rte_eth_tx_queue_setup(portid, 0, nb_txd,
socketid, txconf);
if (ret < 0)
rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup: err=%d, "
"port=%d\n", ret, portid);
printf("\n");
}
for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
if (rte_lcore_is_enabled(lcore_id) == 0)
continue;
qconf = &lcore_conf[lcore_id];
qconf->tx_queue_id = 0;
printf("\nInitializing rx queues on lcore %u ... ", lcore_id );
fflush(stdout);
/* init RX queues */
for(queue = 0; queue < qconf->n_rx_queue; ++queue) {
portid = qconf->rx_queue_list[queue].port_id;
queueid = qconf->rx_queue_list[queue].queue_id;
if (numa_on)
socketid = (uint8_t)rte_lcore_to_socket_id(lcore_id);
else
socketid = 0;
printf("rxq=%d,%d,%d ", portid, queueid, socketid);
fflush(stdout);
ret = rte_eth_rx_queue_setup(portid, queueid, nb_rxd,
socketid, NULL,
pktmbuf_pool[socketid]);
if (ret < 0)
rte_exit(EXIT_FAILURE, "rte_eth_rx_queue_setup: err=%d,"
"port=%d\n", ret, portid);
}
}
printf("\n");
/* start ports */
for (portid = 0; portid < nb_ports; portid++) {
if ((enabled_port_mask & (1 << portid)) == 0) {
continue;
}
/* Start device */
ret = rte_eth_dev_start(portid);
if (ret < 0)
rte_exit(EXIT_FAILURE, "rte_eth_dev_start: err=%d, port=%d\n",
ret, portid);
printf("done: Port %d\n", portid);
}
/* launch per-lcore init on every lcore */
rte_eal_mp_remote_launch(main_loop, NULL, CALL_MASTER);
RTE_LCORE_FOREACH_SLAVE(lcore_id) {
if (rte_eal_wait_lcore(lcore_id) < 0)
return -1;
}
return 0;
}