d/numam-dpdk
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
b0f9296150
numam-dpdk/config/common_base
Ferruh Yigit f13fbc033a kni: remove compile time debug configuration 
Since switched to kernel dynamic debugging it is possible to remove
compile time debug log configuration.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
2016-10-13 23:11:26 +02:00

592 lines
13 KiB
Plaintext
Raw Blame History

# BSD LICENSE
#
# Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# * Neither the name of Intel Corporation nor the names of its
# contributors may be used to endorse or promote products derived
# from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
#
# define executive environment
# RTE_EXEC_ENV values are the directories in mk/exec-env/
#
CONFIG_RTE_EXEC_ENV=
#
# define the architecture we compile for.
# RTE_ARCH values are the directories in mk/arch/
#
CONFIG_RTE_ARCH=
#
# machine can define specific variables or action for a specific board
# RTE_MACHINE values are the directories in mk/machine/
#
CONFIG_RTE_MACHINE=
#
# The compiler we use.
# RTE_TOOLCHAIN values are the directories in mk/toolchain/
#
CONFIG_RTE_TOOLCHAIN=
#
# Use intrinsics or assembly code for key routines
#
CONFIG_RTE_FORCE_INTRINSICS=n
#
# Machine forces strict alignment constraints.
#
CONFIG_RTE_ARCH_STRICT_ALIGN=n
#
# Compile to share library
#
CONFIG_RTE_BUILD_SHARED_LIB=n
#
# Use newest code breaking previous ABI
#
CONFIG_RTE_NEXT_ABI=y
#
# Machine's cache line size
#
CONFIG_RTE_CACHE_LINE_SIZE=64
#
# Compile Environment Abstraction Layer
#
CONFIG_RTE_LIBRTE_EAL=y
CONFIG_RTE_MAX_LCORE=128
CONFIG_RTE_MAX_NUMA_NODES=8
CONFIG_RTE_MAX_MEMSEG=256
CONFIG_RTE_MAX_MEMZONE=2560
CONFIG_RTE_MAX_TAILQ=32
CONFIG_RTE_LOG_LEVEL=RTE_LOG_INFO
CONFIG_RTE_LOG_HISTORY=256
CONFIG_RTE_LIBEAL_USE_HPET=n
CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
CONFIG_RTE_EAL_IGB_UIO=n
CONFIG_RTE_EAL_VFIO=n
CONFIG_RTE_MALLOC_DEBUG=n
# Default driver path (or "" to disable)
CONFIG_RTE_EAL_PMD_PATH=""
#
# Compile Environment Abstraction Layer to support Vmware TSC map
#
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
#
# Compile the argument parser library
#
CONFIG_RTE_LIBRTE_KVARGS=y
#
# Compile generic ethernet library
#
CONFIG_RTE_LIBRTE_ETHER=y
CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
CONFIG_RTE_MAX_ETHPORTS=32
CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
CONFIG_RTE_LIBRTE_IEEE1588=n
CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
#
# Support NIC bypass logic
#
CONFIG_RTE_NIC_BYPASS=n
#
# Compile burst-oriented Amazon ENA PMD driver
#
CONFIG_RTE_LIBRTE_ENA_PMD=y
CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_DRIVER=n
CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n
#
# Compile burst-oriented IGB & EM PMD drivers
#
CONFIG_RTE_LIBRTE_EM_PMD=y
CONFIG_RTE_LIBRTE_IGB_PMD=y
CONFIG_RTE_LIBRTE_E1000_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_DRIVER=n
CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
#
# Compile burst-oriented IXGBE PMD driver
#
CONFIG_RTE_LIBRTE_IXGBE_PMD=y
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_DRIVER=n
CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
CONFIG_RTE_IXGBE_INC_VECTOR=y
CONFIG_RTE_IXGBE_RX_OLFLAGS_ENABLE=y
#
# Compile burst-oriented I40E PMD driver
#
CONFIG_RTE_LIBRTE_I40E_PMD=y
CONFIG_RTE_LIBRTE_I40E_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_DRIVER=n
CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
CONFIG_RTE_LIBRTE_I40E_RX_OLFLAGS_ENABLE=y
CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
# interval up to 8160 us, aligned to 2 (or default value)
CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
#
# Compile burst-oriented FM10K PMD
#
CONFIG_RTE_LIBRTE_FM10K_PMD=y
CONFIG_RTE_LIBRTE_FM10K_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_DRIVER=n
CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
#
# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
#
CONFIG_RTE_LIBRTE_MLX4_PMD=n
CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N=4
CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE=0
CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
#
# Compile burst-oriented Mellanox ConnectX-4 (MLX5) PMD
#
CONFIG_RTE_LIBRTE_MLX5_PMD=n
CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE=8
#
# Compile burst-oriented Broadcom PMD driver
#
CONFIG_RTE_LIBRTE_BNX2X_PMD=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
#
# Compile burst-oriented Chelsio Terminator 10GbE/40GbE (CXGBE) PMD
#
CONFIG_RTE_LIBRTE_CXGBE_PMD=y
CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n
CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n
CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n
CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n
#
# Compile burst-oriented Cisco ENIC PMD driver
#
CONFIG_RTE_LIBRTE_ENIC_PMD=y
CONFIG_RTE_LIBRTE_ENIC_DEBUG=n
#
# Compile burst-oriented Netronome NFP PMD driver
#
CONFIG_RTE_LIBRTE_NFP_PMD=n
CONFIG_RTE_LIBRTE_NFP_DEBUG=n
#
# Compile burst-oriented Broadcom BNXT PMD driver
#
CONFIG_RTE_LIBRTE_BNXT_PMD=y
#
# Compile software PMD backed by SZEDATA2 device
#
CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
#
# Defines firmware type address space.
# RTE_LIBRTE_PMD_SZEDATA2_AS can be:
# 0 - for firmwares:
# NIC_100G1_LR4
# HANIC_100G1_LR4
# HANIC_100G1_SR10
# Other values raise compile time error
CONFIG_RTE_LIBRTE_PMD_SZEDATA2_AS=0
#
# Compile burst-oriented Cavium Thunderx NICVF PMD driver
#
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=n
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_DRIVER=n
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_MBOX=n
#
# Compile burst-oriented VIRTIO PMD driver
#
CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DRIVER=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
#
# Compile virtio device emulation inside virtio PMD driver
#
CONFIG_RTE_VIRTIO_USER=n
#
# Compile burst-oriented VMXNET3 PMD driver
#
CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_DRIVER=n
#
# Compile example software rings based PMD
#
CONFIG_RTE_LIBRTE_PMD_RING=y
CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
#
# Compile software PMD backed by PCAP files
#
CONFIG_RTE_LIBRTE_PMD_PCAP=n
#
# Compile link bonding PMD library
#
CONFIG_RTE_LIBRTE_PMD_BOND=y
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
# QLogic 25G/40G/100G PMD
#
CONFIG_RTE_LIBRTE_QEDE_PMD=n
CONFIG_RTE_LIBRTE_QEDE_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_QEDE_DEBUG_INFO=n
CONFIG_RTE_LIBRTE_QEDE_DEBUG_DRIVER=n
CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
#Provides abs path/name of the firmware file.
#Empty string denotes driver will use default firmware
CONFIG_RTE_LIBRTE_QEDE_FW=""
#
# Compile software PMD backed by AF_PACKET sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
#
# Compile Xen PMD
#
CONFIG_RTE_LIBRTE_PMD_XENVIRT=n
#
# Compile null PMD
#
CONFIG_RTE_LIBRTE_PMD_NULL=y
#
# Do prefetch of packet data within PMD driver receive function
#
CONFIG_RTE_PMD_PACKET_PREFETCH=y
#
# Compile generic crypto device library
#
CONFIG_RTE_LIBRTE_CRYPTODEV=y
CONFIG_RTE_LIBRTE_CRYPTODEV_DEBUG=n
CONFIG_RTE_CRYPTO_MAX_DEVS=64
CONFIG_RTE_CRYPTODEV_NAME_LEN=64
#
# Compile PMD for QuickAssist based devices
#
CONFIG_RTE_LIBRTE_PMD_QAT=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_TX=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_RX=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER=n
#
# Number of sessions to create in the session memory pool
# on a single QuickAssist device.
#
CONFIG_RTE_QAT_PMD_MAX_NB_SESSIONS=2048
#
# Compile PMD for AESNI backed device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
CONFIG_RTE_LIBRTE_PMD_AESNI_MB_DEBUG=n
#
# Compile PMD for Software backed device
#
CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO=n
CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO_DEBUG=n
#
# Compile PMD for AESNI GCM device
#
CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
CONFIG_RTE_LIBRTE_PMD_AESNI_GCM_DEBUG=n
#
# Compile PMD for SNOW 3G device
#
CONFIG_RTE_LIBRTE_PMD_SNOW3G=n
CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
#
# Compile PMD for KASUMI device
#
CONFIG_RTE_LIBRTE_PMD_KASUMI=n
CONFIG_RTE_LIBRTE_PMD_KASUMI_DEBUG=n
#
# Compile PMD for ZUC device
#
CONFIG_RTE_LIBRTE_PMD_ZUC=n
CONFIG_RTE_LIBRTE_PMD_ZUC_DEBUG=n
#
# Compile PMD for NULL Crypto device
#
CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
#
# Compile librte_ring
#
CONFIG_RTE_LIBRTE_RING=y
CONFIG_RTE_LIBRTE_RING_DEBUG=n
CONFIG_RTE_RING_SPLIT_PROD_CONS=n
CONFIG_RTE_RING_PAUSE_REP_COUNT=0
#
# Compile librte_mempool
#
CONFIG_RTE_LIBRTE_MEMPOOL=y
CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
#
# Compile librte_mbuf
#
CONFIG_RTE_LIBRTE_MBUF=y
CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc"
CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
CONFIG_RTE_PKTMBUF_HEADROOM=128
#
# Compile librte_timer
#
CONFIG_RTE_LIBRTE_TIMER=y
CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
#
# Compile librte_cfgfile
#
CONFIG_RTE_LIBRTE_CFGFILE=y
#
# Compile librte_cmdline
#
CONFIG_RTE_LIBRTE_CMDLINE=y
CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
#
# Compile librte_hash
#
CONFIG_RTE_LIBRTE_HASH=y
CONFIG_RTE_LIBRTE_HASH_DEBUG=n
#
# Compile librte_jobstats
#
CONFIG_RTE_LIBRTE_JOBSTATS=y
#
# Compile librte_lpm
#
CONFIG_RTE_LIBRTE_LPM=y
CONFIG_RTE_LIBRTE_LPM_DEBUG=n
#
# Compile librte_acl
#
CONFIG_RTE_LIBRTE_ACL=y
CONFIG_RTE_LIBRTE_ACL_DEBUG=n
#
# Compile librte_power
#
CONFIG_RTE_LIBRTE_POWER=n
CONFIG_RTE_LIBRTE_POWER_DEBUG=n
CONFIG_RTE_MAX_LCORE_FREQS=64
#
# Compile librte_net
#
CONFIG_RTE_LIBRTE_NET=y
#
# Compile librte_ip_frag
#
CONFIG_RTE_LIBRTE_IP_FRAG=y
CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
#
# Compile librte_meter
#
CONFIG_RTE_LIBRTE_METER=y
#
# Compile librte_sched
#
CONFIG_RTE_LIBRTE_SCHED=y
CONFIG_RTE_SCHED_DEBUG=n
CONFIG_RTE_SCHED_RED=n
CONFIG_RTE_SCHED_COLLECT_STATS=n
CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
CONFIG_RTE_SCHED_VECTOR=n
#
# Compile the distributor library
#
CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
#
# Compile the reorder library
#
CONFIG_RTE_LIBRTE_REORDER=y
#
# Compile librte_port
#
CONFIG_RTE_LIBRTE_PORT=y
CONFIG_RTE_PORT_STATS_COLLECT=n
CONFIG_RTE_PORT_PCAP=n
#
# Compile librte_table
#
CONFIG_RTE_LIBRTE_TABLE=y
CONFIG_RTE_TABLE_STATS_COLLECT=n
#
# Compile librte_pipeline
#
CONFIG_RTE_LIBRTE_PIPELINE=y
CONFIG_RTE_PIPELINE_STATS_COLLECT=n
#
# Compile librte_kni
#
CONFIG_RTE_LIBRTE_KNI=n
CONFIG_RTE_KNI_KMOD=n
CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
CONFIG_RTE_KNI_VHOST=n
CONFIG_RTE_KNI_VHOST_MAX_CACHE_SIZE=1024
CONFIG_RTE_KNI_VHOST_VNET_HDR_EN=n
#
# Compile the pdump library
#
CONFIG_RTE_LIBRTE_PDUMP=y
#
# Compile vhost user library
#
CONFIG_RTE_LIBRTE_VHOST=n
CONFIG_RTE_LIBRTE_VHOST_NUMA=n
CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
#
# Compile vhost PMD
# To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled.
#
CONFIG_RTE_LIBRTE_PMD_VHOST=n
#
#Compile Xen domain0 support
#
CONFIG_RTE_LIBRTE_XEN_DOM0=n
#
# Enable warning directives
#
CONFIG_RTE_INSECURE_FUNCTION_WARNING=n
#
# Compile the test application
#
CONFIG_RTE_APP_TEST=y
CONFIG_RTE_APP_TEST_RESOURCE_TAR=n
#
# Compile the PMD test application
#
CONFIG_RTE_TEST_PMD=y
CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
Reference in New Issue View Git Blame Copy Permalink