numam-dpdk/drivers/net/e1000/base/e1000_mbx.h
Xiaolong Ye 41ede22ecf net/e1000: replace license text with SPDX tag
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2019-07-24 18:44:40 +02:00

77 lines
3.6 KiB
C

/* SPDX-License-Identifier: BSD-3-Clause
* Copyright(c) 2001 - 2015 Intel Corporation
*/
#ifndef _E1000_MBX_H_
#define _E1000_MBX_H_
#include "e1000_api.h"
/* Define mailbox register bits */
#define E1000_V2PMAILBOX_REQ 0x00000001 /* Request for PF Ready bit */
#define E1000_V2PMAILBOX_ACK 0x00000002 /* Ack PF message received */
#define E1000_V2PMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */
#define E1000_V2PMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */
#define E1000_V2PMAILBOX_PFSTS 0x00000010 /* PF wrote a message in the MB */
#define E1000_V2PMAILBOX_PFACK 0x00000020 /* PF ack the previous VF msg */
#define E1000_V2PMAILBOX_RSTI 0x00000040 /* PF has reset indication */
#define E1000_V2PMAILBOX_RSTD 0x00000080 /* PF has indicated reset done */
#define E1000_V2PMAILBOX_R2C_BITS 0x000000B0 /* All read to clear bits */
#define E1000_P2VMAILBOX_STS 0x00000001 /* Initiate message send to VF */
#define E1000_P2VMAILBOX_ACK 0x00000002 /* Ack message recv'd from VF */
#define E1000_P2VMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */
#define E1000_P2VMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */
#define E1000_P2VMAILBOX_RVFU 0x00000010 /* Reset VFU - used when VF stuck */
#define E1000_MBVFICR_VFREQ_MASK 0x000000FF /* bits for VF messages */
#define E1000_MBVFICR_VFREQ_VF1 0x00000001 /* bit for VF 1 message */
#define E1000_MBVFICR_VFACK_MASK 0x00FF0000 /* bits for VF acks */
#define E1000_MBVFICR_VFACK_VF1 0x00010000 /* bit for VF 1 ack */
#define E1000_VFMAILBOX_SIZE 16 /* 16 32 bit words - 64 bytes */
/* If it's a E1000_VF_* msg then it originates in the VF and is sent to the
* PF. The reverse is true if it is E1000_PF_*.
* Message ACK's are the value or'd with 0xF0000000
*/
/* Msgs below or'd with this are the ACK */
#define E1000_VT_MSGTYPE_ACK 0x80000000
/* Msgs below or'd with this are the NACK */
#define E1000_VT_MSGTYPE_NACK 0x40000000
/* Indicates that VF is still clear to send requests */
#define E1000_VT_MSGTYPE_CTS 0x20000000
#define E1000_VT_MSGINFO_SHIFT 16
/* bits 23:16 are used for extra info for certain messages */
#define E1000_VT_MSGINFO_MASK (0xFF << E1000_VT_MSGINFO_SHIFT)
#define E1000_VF_RESET 0x01 /* VF requests reset */
#define E1000_VF_SET_MAC_ADDR 0x02 /* VF requests to set MAC addr */
#define E1000_VF_SET_MULTICAST 0x03 /* VF requests to set MC addr */
#define E1000_VF_SET_MULTICAST_COUNT_MASK (0x1F << E1000_VT_MSGINFO_SHIFT)
#define E1000_VF_SET_MULTICAST_OVERFLOW (0x80 << E1000_VT_MSGINFO_SHIFT)
#define E1000_VF_SET_VLAN 0x04 /* VF requests to set VLAN */
#define E1000_VF_SET_VLAN_ADD (0x01 << E1000_VT_MSGINFO_SHIFT)
#define E1000_VF_SET_LPE 0x05 /* reqs to set VMOLR.LPE */
#define E1000_VF_SET_PROMISC 0x06 /* reqs to clear VMOLR.ROPE/MPME*/
#define E1000_VF_SET_PROMISC_UNICAST (0x01 << E1000_VT_MSGINFO_SHIFT)
#define E1000_VF_SET_PROMISC_MULTICAST (0x02 << E1000_VT_MSGINFO_SHIFT)
#define E1000_PF_CONTROL_MSG 0x0100 /* PF control message */
#define E1000_VF_MBX_INIT_TIMEOUT 2000 /* number of retries on mailbox */
#define E1000_VF_MBX_INIT_DELAY 500 /* microseconds between retries */
s32 e1000_read_mbx(struct e1000_hw *, u32 *, u16, u16);
s32 e1000_write_mbx(struct e1000_hw *, u32 *, u16, u16);
s32 e1000_read_posted_mbx(struct e1000_hw *, u32 *, u16, u16);
s32 e1000_write_posted_mbx(struct e1000_hw *, u32 *, u16, u16);
s32 e1000_check_for_msg(struct e1000_hw *, u16);
s32 e1000_check_for_ack(struct e1000_hw *, u16);
s32 e1000_check_for_rst(struct e1000_hw *, u16);
void e1000_init_mbx_ops_generic(struct e1000_hw *hw);
s32 e1000_init_mbx_params_vf(struct e1000_hw *);
s32 e1000_init_mbx_params_pf(struct e1000_hw *);
#endif /* _E1000_MBX_H_ */