numam-dpdk/drivers/crypto/snow3g/rte_snow3g_pmd.c
Bruce Richardson ecaed092b6 ring: return remaining entry count when dequeuing
Add an extra parameter to the ring dequeue burst/bulk functions so that
those functions can optionally return the amount of remaining objs in the
ring. This information can be used by applications in a number of ways,
for instance, with single-consumer queues, it provides a max
dequeue size which is guaranteed to work.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
2017-03-29 22:32:20 +02:00

652 lines
18 KiB
C

/*-
* BSD LICENSE
*
* Copyright(c) 2016 Intel Corporation. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <rte_common.h>
#include <rte_config.h>
#include <rte_hexdump.h>
#include <rte_cryptodev.h>
#include <rte_cryptodev_pmd.h>
#include <rte_vdev.h>
#include <rte_malloc.h>
#include <rte_cpuflags.h>
#include "rte_snow3g_pmd_private.h"
#define SNOW3G_IV_LENGTH 16
#define SNOW3G_DIGEST_LENGTH 4
#define SNOW3G_MAX_BURST 8
#define BYTE_LEN 8
/** Get xform chain order. */
static enum snow3g_operation
snow3g_get_mode(const struct rte_crypto_sym_xform *xform)
{
if (xform == NULL)
return SNOW3G_OP_NOT_SUPPORTED;
if (xform->next)
if (xform->next->next != NULL)
return SNOW3G_OP_NOT_SUPPORTED;
if (xform->type == RTE_CRYPTO_SYM_XFORM_AUTH) {
if (xform->next == NULL)
return SNOW3G_OP_ONLY_AUTH;
else if (xform->next->type == RTE_CRYPTO_SYM_XFORM_CIPHER)
return SNOW3G_OP_AUTH_CIPHER;
else
return SNOW3G_OP_NOT_SUPPORTED;
}
if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER) {
if (xform->next == NULL)
return SNOW3G_OP_ONLY_CIPHER;
else if (xform->next->type == RTE_CRYPTO_SYM_XFORM_AUTH)
return SNOW3G_OP_CIPHER_AUTH;
else
return SNOW3G_OP_NOT_SUPPORTED;
}
return SNOW3G_OP_NOT_SUPPORTED;
}
/** Parse crypto xform chain and set private session parameters. */
int
snow3g_set_session_parameters(struct snow3g_session *sess,
const struct rte_crypto_sym_xform *xform)
{
const struct rte_crypto_sym_xform *auth_xform = NULL;
const struct rte_crypto_sym_xform *cipher_xform = NULL;
enum snow3g_operation mode;
/* Select Crypto operation - hash then cipher / cipher then hash */
mode = snow3g_get_mode(xform);
switch (mode) {
case SNOW3G_OP_CIPHER_AUTH:
auth_xform = xform->next;
/* Fall-through */
case SNOW3G_OP_ONLY_CIPHER:
cipher_xform = xform;
break;
case SNOW3G_OP_AUTH_CIPHER:
cipher_xform = xform->next;
/* Fall-through */
case SNOW3G_OP_ONLY_AUTH:
auth_xform = xform;
break;
case SNOW3G_OP_NOT_SUPPORTED:
default:
SNOW3G_LOG_ERR("Unsupported operation chain order parameter");
return -EINVAL;
}
if (cipher_xform) {
/* Only SNOW 3G UEA2 supported */
if (cipher_xform->cipher.algo != RTE_CRYPTO_CIPHER_SNOW3G_UEA2)
return -EINVAL;
/* Initialize key */
sso_snow3g_init_key_sched(cipher_xform->cipher.key.data,
&sess->pKeySched_cipher);
}
if (auth_xform) {
/* Only SNOW 3G UIA2 supported */
if (auth_xform->auth.algo != RTE_CRYPTO_AUTH_SNOW3G_UIA2)
return -EINVAL;
sess->auth_op = auth_xform->auth.op;
/* Initialize key */
sso_snow3g_init_key_sched(auth_xform->auth.key.data,
&sess->pKeySched_hash);
}
sess->op = mode;
return 0;
}
/** Get SNOW 3G session. */
static struct snow3g_session *
snow3g_get_session(struct snow3g_qp *qp, struct rte_crypto_op *op)
{
struct snow3g_session *sess;
if (op->sym->sess_type == RTE_CRYPTO_SYM_OP_WITH_SESSION) {
if (unlikely(op->sym->session->dev_type !=
RTE_CRYPTODEV_SNOW3G_PMD))
return NULL;
sess = (struct snow3g_session *)op->sym->session->_private;
} else {
struct rte_cryptodev_session *c_sess = NULL;
if (rte_mempool_get(qp->sess_mp, (void **)&c_sess))
return NULL;
sess = (struct snow3g_session *)c_sess->_private;
if (unlikely(snow3g_set_session_parameters(sess,
op->sym->xform) != 0))
return NULL;
}
return sess;
}
/** Encrypt/decrypt mbufs with same cipher key. */
static uint8_t
process_snow3g_cipher_op(struct rte_crypto_op **ops,
struct snow3g_session *session,
uint8_t num_ops)
{
unsigned i;
uint8_t processed_ops = 0;
uint8_t *src[SNOW3G_MAX_BURST], *dst[SNOW3G_MAX_BURST];
uint8_t *IV[SNOW3G_MAX_BURST];
uint32_t num_bytes[SNOW3G_MAX_BURST];
for (i = 0; i < num_ops; i++) {
/* Sanity checks. */
if (unlikely(ops[i]->sym->cipher.iv.length != SNOW3G_IV_LENGTH)) {
ops[i]->status = RTE_CRYPTO_OP_STATUS_INVALID_ARGS;
SNOW3G_LOG_ERR("iv");
break;
}
src[i] = rte_pktmbuf_mtod(ops[i]->sym->m_src, uint8_t *) +
(ops[i]->sym->cipher.data.offset >> 3);
dst[i] = ops[i]->sym->m_dst ?
rte_pktmbuf_mtod(ops[i]->sym->m_dst, uint8_t *) +
(ops[i]->sym->cipher.data.offset >> 3) :
rte_pktmbuf_mtod(ops[i]->sym->m_src, uint8_t *) +
(ops[i]->sym->cipher.data.offset >> 3);
IV[i] = ops[i]->sym->cipher.iv.data;
num_bytes[i] = ops[i]->sym->cipher.data.length >> 3;
processed_ops++;
}
sso_snow3g_f8_n_buffer(&session->pKeySched_cipher, IV, src, dst,
num_bytes, processed_ops);
return processed_ops;
}
/** Encrypt/decrypt mbuf (bit level function). */
static uint8_t
process_snow3g_cipher_op_bit(struct rte_crypto_op *op,
struct snow3g_session *session)
{
uint8_t *src, *dst;
uint8_t *IV;
uint32_t length_in_bits, offset_in_bits;
/* Sanity checks. */
if (unlikely(op->sym->cipher.iv.length != SNOW3G_IV_LENGTH)) {
op->status = RTE_CRYPTO_OP_STATUS_INVALID_ARGS;
SNOW3G_LOG_ERR("iv");
return 0;
}
offset_in_bits = op->sym->cipher.data.offset;
src = rte_pktmbuf_mtod(op->sym->m_src, uint8_t *);
if (op->sym->m_dst == NULL) {
op->status = RTE_CRYPTO_OP_STATUS_INVALID_ARGS;
SNOW3G_LOG_ERR("bit-level in-place not supported\n");
return 0;
}
dst = rte_pktmbuf_mtod(op->sym->m_dst, uint8_t *);
IV = op->sym->cipher.iv.data;
length_in_bits = op->sym->cipher.data.length;
sso_snow3g_f8_1_buffer_bit(&session->pKeySched_cipher, IV,
src, dst, length_in_bits, offset_in_bits);
return 1;
}
/** Generate/verify hash from mbufs with same hash key. */
static int
process_snow3g_hash_op(struct rte_crypto_op **ops,
struct snow3g_session *session,
uint8_t num_ops)
{
unsigned i;
uint8_t processed_ops = 0;
uint8_t *src, *dst;
uint32_t length_in_bits;
for (i = 0; i < num_ops; i++) {
if (unlikely(ops[i]->sym->auth.aad.length != SNOW3G_IV_LENGTH)) {
ops[i]->status = RTE_CRYPTO_OP_STATUS_INVALID_ARGS;
SNOW3G_LOG_ERR("aad");
break;
}
if (unlikely(ops[i]->sym->auth.digest.length != SNOW3G_DIGEST_LENGTH)) {
ops[i]->status = RTE_CRYPTO_OP_STATUS_INVALID_ARGS;
SNOW3G_LOG_ERR("digest");
break;
}
/* Data must be byte aligned */
if ((ops[i]->sym->auth.data.offset % BYTE_LEN) != 0) {
ops[i]->status = RTE_CRYPTO_OP_STATUS_INVALID_ARGS;
SNOW3G_LOG_ERR("Offset");
break;
}
length_in_bits = ops[i]->sym->auth.data.length;
src = rte_pktmbuf_mtod(ops[i]->sym->m_src, uint8_t *) +
(ops[i]->sym->auth.data.offset >> 3);
if (session->auth_op == RTE_CRYPTO_AUTH_OP_VERIFY) {
dst = (uint8_t *)rte_pktmbuf_append(ops[i]->sym->m_src,
ops[i]->sym->auth.digest.length);
sso_snow3g_f9_1_buffer(&session->pKeySched_hash,
ops[i]->sym->auth.aad.data, src,
length_in_bits, dst);
/* Verify digest. */
if (memcmp(dst, ops[i]->sym->auth.digest.data,
ops[i]->sym->auth.digest.length) != 0)
ops[i]->status = RTE_CRYPTO_OP_STATUS_AUTH_FAILED;
/* Trim area used for digest from mbuf. */
rte_pktmbuf_trim(ops[i]->sym->m_src,
ops[i]->sym->auth.digest.length);
} else {
dst = ops[i]->sym->auth.digest.data;
sso_snow3g_f9_1_buffer(&session->pKeySched_hash,
ops[i]->sym->auth.aad.data, src,
length_in_bits, dst);
}
processed_ops++;
}
return processed_ops;
}
/** Process a batch of crypto ops which shares the same session. */
static int
process_ops(struct rte_crypto_op **ops, struct snow3g_session *session,
struct snow3g_qp *qp, uint8_t num_ops,
uint16_t *accumulated_enqueued_ops)
{
unsigned i;
unsigned enqueued_ops, processed_ops;
#ifdef RTE_LIBRTE_PMD_SNOW3G_DEBUG
for (i = 0; i < num_ops; i++) {
if (!rte_pktmbuf_is_contiguous(ops[i]->sym->m_src) ||
(ops[i]->sym->m_dst != NULL &&
!rte_pktmbuf_is_contiguous(
ops[i]->sym->m_dst))) {
SNOW3G_LOG_ERR("PMD supports only contiguous mbufs, "
"op (%p) provides noncontiguous mbuf as "
"source/destination buffer.\n", ops[i]);
ops[i]->status = RTE_CRYPTO_OP_STATUS_INVALID_ARGS;
return 0;
}
}
#endif
switch (session->op) {
case SNOW3G_OP_ONLY_CIPHER:
processed_ops = process_snow3g_cipher_op(ops,
session, num_ops);
break;
case SNOW3G_OP_ONLY_AUTH:
processed_ops = process_snow3g_hash_op(ops, session,
num_ops);
break;
case SNOW3G_OP_CIPHER_AUTH:
processed_ops = process_snow3g_cipher_op(ops, session,
num_ops);
process_snow3g_hash_op(ops, session, processed_ops);
break;
case SNOW3G_OP_AUTH_CIPHER:
processed_ops = process_snow3g_hash_op(ops, session,
num_ops);
process_snow3g_cipher_op(ops, session, processed_ops);
break;
default:
/* Operation not supported. */
processed_ops = 0;
}
for (i = 0; i < num_ops; i++) {
/*
* If there was no error/authentication failure,
* change status to successful.
*/
if (ops[i]->status == RTE_CRYPTO_OP_STATUS_NOT_PROCESSED)
ops[i]->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
/* Free session if a session-less crypto op. */
if (ops[i]->sym->sess_type == RTE_CRYPTO_SYM_OP_SESSIONLESS) {
rte_mempool_put(qp->sess_mp, ops[i]->sym->session);
ops[i]->sym->session = NULL;
}
}
enqueued_ops = rte_ring_enqueue_burst(qp->processed_ops,
(void **)ops, processed_ops, NULL);
qp->qp_stats.enqueued_count += enqueued_ops;
*accumulated_enqueued_ops += enqueued_ops;
return enqueued_ops;
}
/** Process a crypto op with length/offset in bits. */
static int
process_op_bit(struct rte_crypto_op *op, struct snow3g_session *session,
struct snow3g_qp *qp, uint16_t *accumulated_enqueued_ops)
{
unsigned enqueued_op, processed_op;
switch (session->op) {
case SNOW3G_OP_ONLY_CIPHER:
processed_op = process_snow3g_cipher_op_bit(op,
session);
break;
case SNOW3G_OP_ONLY_AUTH:
processed_op = process_snow3g_hash_op(&op, session, 1);
break;
case SNOW3G_OP_CIPHER_AUTH:
processed_op = process_snow3g_cipher_op_bit(op, session);
if (processed_op == 1)
process_snow3g_hash_op(&op, session, 1);
break;
case SNOW3G_OP_AUTH_CIPHER:
processed_op = process_snow3g_hash_op(&op, session, 1);
if (processed_op == 1)
process_snow3g_cipher_op_bit(op, session);
break;
default:
/* Operation not supported. */
processed_op = 0;
}
/*
* If there was no error/authentication failure,
* change status to successful.
*/
if (op->status == RTE_CRYPTO_OP_STATUS_NOT_PROCESSED)
op->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
/* Free session if a session-less crypto op. */
if (op->sym->sess_type == RTE_CRYPTO_SYM_OP_SESSIONLESS) {
rte_mempool_put(qp->sess_mp, op->sym->session);
op->sym->session = NULL;
}
enqueued_op = rte_ring_enqueue_burst(qp->processed_ops,
(void **)&op, processed_op, NULL);
qp->qp_stats.enqueued_count += enqueued_op;
*accumulated_enqueued_ops += enqueued_op;
return enqueued_op;
}
static uint16_t
snow3g_pmd_enqueue_burst(void *queue_pair, struct rte_crypto_op **ops,
uint16_t nb_ops)
{
struct rte_crypto_op *c_ops[SNOW3G_MAX_BURST];
struct rte_crypto_op *curr_c_op;
struct snow3g_session *prev_sess = NULL, *curr_sess = NULL;
struct snow3g_qp *qp = queue_pair;
unsigned i;
uint8_t burst_size = 0;
uint16_t enqueued_ops = 0;
uint8_t processed_ops;
for (i = 0; i < nb_ops; i++) {
curr_c_op = ops[i];
/* Set status as enqueued (not processed yet) by default. */
curr_c_op->status = RTE_CRYPTO_OP_STATUS_NOT_PROCESSED;
curr_sess = snow3g_get_session(qp, curr_c_op);
if (unlikely(curr_sess == NULL ||
curr_sess->op == SNOW3G_OP_NOT_SUPPORTED)) {
curr_c_op->status =
RTE_CRYPTO_OP_STATUS_INVALID_SESSION;
break;
}
/* If length/offset is at bit-level, process this buffer alone. */
if (((curr_c_op->sym->cipher.data.length % BYTE_LEN) != 0)
|| ((curr_c_op->sym->cipher.data.offset
% BYTE_LEN) != 0)) {
/* Process the ops of the previous session. */
if (prev_sess != NULL) {
processed_ops = process_ops(c_ops, prev_sess,
qp, burst_size, &enqueued_ops);
if (processed_ops < burst_size) {
burst_size = 0;
break;
}
burst_size = 0;
prev_sess = NULL;
}
processed_ops = process_op_bit(curr_c_op, curr_sess,
qp, &enqueued_ops);
if (processed_ops != 1)
break;
continue;
}
/* Batch ops that share the same session. */
if (prev_sess == NULL) {
prev_sess = curr_sess;
c_ops[burst_size++] = curr_c_op;
} else if (curr_sess == prev_sess) {
c_ops[burst_size++] = curr_c_op;
/*
* When there are enough ops to process in a batch,
* process them, and start a new batch.
*/
if (burst_size == SNOW3G_MAX_BURST) {
processed_ops = process_ops(c_ops, prev_sess,
qp, burst_size, &enqueued_ops);
if (processed_ops < burst_size) {
burst_size = 0;
break;
}
burst_size = 0;
prev_sess = NULL;
}
} else {
/*
* Different session, process the ops
* of the previous session.
*/
processed_ops = process_ops(c_ops, prev_sess,
qp, burst_size, &enqueued_ops);
if (processed_ops < burst_size) {
burst_size = 0;
break;
}
burst_size = 0;
prev_sess = curr_sess;
c_ops[burst_size++] = curr_c_op;
}
}
if (burst_size != 0) {
/* Process the crypto ops of the last session. */
processed_ops = process_ops(c_ops, prev_sess,
qp, burst_size, &enqueued_ops);
}
qp->qp_stats.enqueue_err_count += nb_ops - enqueued_ops;
return enqueued_ops;
}
static uint16_t
snow3g_pmd_dequeue_burst(void *queue_pair,
struct rte_crypto_op **c_ops, uint16_t nb_ops)
{
struct snow3g_qp *qp = queue_pair;
unsigned nb_dequeued;
nb_dequeued = rte_ring_dequeue_burst(qp->processed_ops,
(void **)c_ops, nb_ops, NULL);
qp->qp_stats.dequeued_count += nb_dequeued;
return nb_dequeued;
}
static int cryptodev_snow3g_remove(const char *name);
static int
cryptodev_snow3g_create(struct rte_crypto_vdev_init_params *init_params)
{
struct rte_cryptodev *dev;
struct snow3g_private *internals;
uint64_t cpu_flags = 0;
if (init_params->name[0] == '\0') {
int ret = rte_cryptodev_pmd_create_dev_name(
init_params->name,
RTE_STR(CRYPTODEV_NAME_SNOW3G_PMD));
if (ret < 0) {
SNOW3G_LOG_ERR("failed to create unique name");
return ret;
}
}
/* Check CPU for supported vector instruction set */
if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_SSE4_1))
cpu_flags |= RTE_CRYPTODEV_FF_CPU_SSE;
else {
SNOW3G_LOG_ERR("Vector instructions are not supported by CPU");
return -EFAULT;
}
dev = rte_cryptodev_pmd_virtual_dev_init(init_params->name,
sizeof(struct snow3g_private), init_params->socket_id);
if (dev == NULL) {
SNOW3G_LOG_ERR("failed to create cryptodev vdev");
goto init_error;
}
dev->dev_type = RTE_CRYPTODEV_SNOW3G_PMD;
dev->dev_ops = rte_snow3g_pmd_ops;
/* Register RX/TX burst functions for data path. */
dev->dequeue_burst = snow3g_pmd_dequeue_burst;
dev->enqueue_burst = snow3g_pmd_enqueue_burst;
dev->feature_flags = RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO |
RTE_CRYPTODEV_FF_SYM_OPERATION_CHAINING |
cpu_flags;
internals = dev->data->dev_private;
internals->max_nb_queue_pairs = init_params->max_nb_queue_pairs;
internals->max_nb_sessions = init_params->max_nb_sessions;
return 0;
init_error:
SNOW3G_LOG_ERR("driver %s: cryptodev_snow3g_create failed",
init_params->name);
cryptodev_snow3g_remove(init_params->name);
return -EFAULT;
}
static int
cryptodev_snow3g_probe(const char *name,
const char *input_args)
{
struct rte_crypto_vdev_init_params init_params = {
RTE_CRYPTODEV_VDEV_DEFAULT_MAX_NB_QUEUE_PAIRS,
RTE_CRYPTODEV_VDEV_DEFAULT_MAX_NB_SESSIONS,
rte_socket_id(),
{0}
};
rte_cryptodev_parse_vdev_init_params(&init_params, input_args);
RTE_LOG(INFO, PMD, "Initialising %s on NUMA node %d\n", name,
init_params.socket_id);
if (init_params.name[0] != '\0')
RTE_LOG(INFO, PMD, " User defined name = %s\n",
init_params.name);
RTE_LOG(INFO, PMD, " Max number of queue pairs = %d\n",
init_params.max_nb_queue_pairs);
RTE_LOG(INFO, PMD, " Max number of sessions = %d\n",
init_params.max_nb_sessions);
return cryptodev_snow3g_create(&init_params);
}
static int
cryptodev_snow3g_remove(const char *name)
{
if (name == NULL)
return -EINVAL;
RTE_LOG(INFO, PMD, "Closing SNOW 3G crypto device %s"
" on numa socket %u\n",
name, rte_socket_id());
return 0;
}
static struct rte_vdev_driver cryptodev_snow3g_pmd_drv = {
.probe = cryptodev_snow3g_probe,
.remove = cryptodev_snow3g_remove
};
RTE_PMD_REGISTER_VDEV(CRYPTODEV_NAME_SNOW3G_PMD, cryptodev_snow3g_pmd_drv);
RTE_PMD_REGISTER_ALIAS(CRYPTODEV_NAME_SNOW3G_PMD, cryptodev_snow3g_pmd);
RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_SNOW3G_PMD,
"max_nb_queue_pairs=<int> "
"max_nb_sessions=<int> "
"socket_id=<int>");