d/numam-dpdk
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
bd85525efb
numam-dpdk/drivers/net/virtio/virtio_pci.h
Olivier Matz 60e6f4707e net/virtio: reinitialize device when configuring 
Add the ability to reset the virtio device in the configure callback
if the features flag changed since previous reset. This will be possible
with the introduction of offload support in next commits.

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
2016-10-13 20:30:33 +02:00

320 lines
12 KiB
C
Raw Blame History

/*-
* BSD LICENSE
*
* Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _VIRTIO_PCI_H_
#define _VIRTIO_PCI_H_
#include <stdint.h>
#include <rte_pci.h>
#include <rte_ethdev.h>
struct virtqueue;
struct virtnet_ctl;
/* VirtIO PCI vendor/device ID. */
#define VIRTIO_PCI_VENDORID 0x1AF4
#define VIRTIO_PCI_LEGACY_DEVICEID_NET 0x1000
#define VIRTIO_PCI_MODERN_DEVICEID_NET 0x1041
/* VirtIO ABI version, this must match exactly. */
#define VIRTIO_PCI_ABI_VERSION 0
/*
* VirtIO Header, located in BAR 0.
*/
#define VIRTIO_PCI_HOST_FEATURES 0 /* host's supported features (32bit, RO)*/
#define VIRTIO_PCI_GUEST_FEATURES 4 /* guest's supported features (32, RW) */
#define VIRTIO_PCI_QUEUE_PFN 8 /* physical address of VQ (32, RW) */
#define VIRTIO_PCI_QUEUE_NUM 12 /* number of ring entries (16, RO) */
#define VIRTIO_PCI_QUEUE_SEL 14 /* current VQ selection (16, RW) */
#define VIRTIO_PCI_QUEUE_NOTIFY 16 /* notify host regarding VQ (16, RW) */
#define VIRTIO_PCI_STATUS 18 /* device status register (8, RW) */
#define VIRTIO_PCI_ISR 19 /* interrupt status register, reading
* also clears the register (8, RO) */
/* Only if MSIX is enabled: */
#define VIRTIO_MSI_CONFIG_VECTOR 20 /* configuration change vector (16, RW) */
#define VIRTIO_MSI_QUEUE_VECTOR 22 /* vector for selected VQ notifications
(16, RW) */
/* The bit of the ISR which indicates a device has an interrupt. */
#define VIRTIO_PCI_ISR_INTR 0x1
/* The bit of the ISR which indicates a device configuration change. */
#define VIRTIO_PCI_ISR_CONFIG 0x2
/* Vector value used to disable MSI for queue. */
#define VIRTIO_MSI_NO_VECTOR 0xFFFF
/* VirtIO device IDs. */
#define VIRTIO_ID_NETWORK 0x01
#define VIRTIO_ID_BLOCK 0x02
#define VIRTIO_ID_CONSOLE 0x03
#define VIRTIO_ID_ENTROPY 0x04
#define VIRTIO_ID_BALLOON 0x05
#define VIRTIO_ID_IOMEMORY 0x06
#define VIRTIO_ID_9P 0x09
/* Status byte for guest to report progress. */
#define VIRTIO_CONFIG_STATUS_RESET 0x00
#define VIRTIO_CONFIG_STATUS_ACK 0x01
#define VIRTIO_CONFIG_STATUS_DRIVER 0x02
#define VIRTIO_CONFIG_STATUS_DRIVER_OK 0x04
#define VIRTIO_CONFIG_STATUS_FEATURES_OK 0x08
#define VIRTIO_CONFIG_STATUS_FAILED 0x80
/*
* Each virtqueue indirect descriptor list must be physically contiguous.
* To allow us to malloc(9) each list individually, limit the number
* supported to what will fit in one page. With 4KB pages, this is a limit
* of 256 descriptors. If there is ever a need for more, we can switch to
* contigmalloc(9) for the larger allocations, similar to what
* bus_dmamem_alloc(9) does.
*
* Note the sizeof(struct vring_desc) is 16 bytes.
*/
#define VIRTIO_MAX_INDIRECT ((int) (PAGE_SIZE / 16))
/* The feature bitmap for virtio net */
#define VIRTIO_NET_F_CSUM 0 /* Host handles pkts w/ partial csum */
#define VIRTIO_NET_F_GUEST_CSUM 1 /* Guest handles pkts w/ partial csum */
#define VIRTIO_NET_F_MAC 5 /* Host has given MAC address. */
#define VIRTIO_NET_F_GUEST_TSO4 7 /* Guest can handle TSOv4 in. */
#define VIRTIO_NET_F_GUEST_TSO6 8 /* Guest can handle TSOv6 in. */
#define VIRTIO_NET_F_GUEST_ECN 9 /* Guest can handle TSO[6] w/ ECN in. */
#define VIRTIO_NET_F_GUEST_UFO 10 /* Guest can handle UFO in. */
#define VIRTIO_NET_F_HOST_TSO4 11 /* Host can handle TSOv4 in. */
#define VIRTIO_NET_F_HOST_TSO6 12 /* Host can handle TSOv6 in. */
#define VIRTIO_NET_F_HOST_ECN 13 /* Host can handle TSO[6] w/ ECN in. */
#define VIRTIO_NET_F_HOST_UFO 14 /* Host can handle UFO in. */
#define VIRTIO_NET_F_MRG_RXBUF 15 /* Host can merge receive buffers. */
#define VIRTIO_NET_F_STATUS 16 /* virtio_net_config.status available */
#define VIRTIO_NET_F_CTRL_VQ 17 /* Control channel available */
#define VIRTIO_NET_F_CTRL_RX 18 /* Control channel RX mode support */
#define VIRTIO_NET_F_CTRL_VLAN 19 /* Control channel VLAN filtering */
#define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */
#define VIRTIO_NET_F_GUEST_ANNOUNCE 21 /* Guest can announce device on the
* network */
#define VIRTIO_NET_F_MQ 22 /* Device supports Receive Flow
* Steering */
#define VIRTIO_NET_F_CTRL_MAC_ADDR 23 /* Set MAC address */
/* Do we get callbacks when the ring is completely used, even if we've
* suppressed them? */
#define VIRTIO_F_NOTIFY_ON_EMPTY 24
/* Can the device handle any descriptor layout? */
#define VIRTIO_F_ANY_LAYOUT 27
/* We support indirect buffer descriptors */
#define VIRTIO_RING_F_INDIRECT_DESC 28
#define VIRTIO_F_VERSION_1 32
#define VIRTIO_F_IOMMU_PLATFORM 33
/*
* Some VirtIO feature bits (currently bits 28 through 31) are
* reserved for the transport being used (eg. virtio_ring), the
* rest are per-device feature bits.
*/
#define VIRTIO_TRANSPORT_F_START 28
#define VIRTIO_TRANSPORT_F_END 34
/* The Guest publishes the used index for which it expects an interrupt
* at the end of the avail ring. Host should ignore the avail->flags field. */
/* The Host publishes the avail index for which it expects a kick
* at the end of the used ring. Guest should ignore the used->flags field. */
#define VIRTIO_RING_F_EVENT_IDX 29
#define VIRTIO_NET_S_LINK_UP 1 /* Link is up */
#define VIRTIO_NET_S_ANNOUNCE 2 /* Announcement is needed */
/*
* Maximum number of virtqueues per device.
*/
#define VIRTIO_MAX_VIRTQUEUES 8
/* Common configuration */
#define VIRTIO_PCI_CAP_COMMON_CFG 1
/* Notifications */
#define VIRTIO_PCI_CAP_NOTIFY_CFG 2
/* ISR Status */
#define VIRTIO_PCI_CAP_ISR_CFG 3
/* Device specific configuration */
#define VIRTIO_PCI_CAP_DEVICE_CFG 4
/* PCI configuration access */
#define VIRTIO_PCI_CAP_PCI_CFG 5
/* This is the PCI capability header: */
struct virtio_pci_cap {
uint8_t cap_vndr; /* Generic PCI field: PCI_CAP_ID_VNDR */
uint8_t cap_next; /* Generic PCI field: next ptr. */
uint8_t cap_len; /* Generic PCI field: capability length */
uint8_t cfg_type; /* Identifies the structure. */
uint8_t bar; /* Where to find it. */
uint8_t padding[3]; /* Pad to full dword. */
uint32_t offset; /* Offset within bar. */
uint32_t length; /* Length of the structure, in bytes. */
};
struct virtio_pci_notify_cap {
struct virtio_pci_cap cap;
uint32_t notify_off_multiplier; /* Multiplier for queue_notify_off. */
};
/* Fields in VIRTIO_PCI_CAP_COMMON_CFG: */
struct virtio_pci_common_cfg {
/* About the whole device. */
uint32_t device_feature_select; /* read-write */
uint32_t device_feature; /* read-only */
uint32_t guest_feature_select; /* read-write */
uint32_t guest_feature; /* read-write */
uint16_t msix_config; /* read-write */
uint16_t num_queues; /* read-only */
uint8_t device_status; /* read-write */
uint8_t config_generation; /* read-only */
/* About a specific virtqueue. */
uint16_t queue_select; /* read-write */
uint16_t queue_size; /* read-write, power of 2. */
uint16_t queue_msix_vector; /* read-write */
uint16_t queue_enable; /* read-write */
uint16_t queue_notify_off; /* read-only */
uint32_t queue_desc_lo; /* read-write */
uint32_t queue_desc_hi; /* read-write */
uint32_t queue_avail_lo; /* read-write */
uint32_t queue_avail_hi; /* read-write */
uint32_t queue_used_lo; /* read-write */
uint32_t queue_used_hi; /* read-write */
};
struct virtio_hw;
struct virtio_pci_ops {
void (*read_dev_cfg)(struct virtio_hw *hw, size_t offset,
void *dst, int len);
void (*write_dev_cfg)(struct virtio_hw *hw, size_t offset,
const void *src, int len);
void (*reset)(struct virtio_hw *hw);
uint8_t (*get_status)(struct virtio_hw *hw);
void (*set_status)(struct virtio_hw *hw, uint8_t status);
uint64_t (*get_features)(struct virtio_hw *hw);
void (*set_features)(struct virtio_hw *hw, uint64_t features);
uint8_t (*get_isr)(struct virtio_hw *hw);
uint16_t (*set_config_irq)(struct virtio_hw *hw, uint16_t vec);
uint16_t (*get_queue_num)(struct virtio_hw *hw, uint16_t queue_id);
int (*setup_queue)(struct virtio_hw *hw, struct virtqueue *vq);
void (*del_queue)(struct virtio_hw *hw, struct virtqueue *vq);
void (*notify_queue)(struct virtio_hw *hw, struct virtqueue *vq);
};
struct virtio_net_config;
struct virtio_hw {
struct virtnet_ctl *cvq;
struct rte_pci_ioport io;
uint64_t req_guest_features;
uint64_t guest_features;
uint32_t max_queue_pairs;
uint16_t vtnet_hdr_size;
uint8_t vlan_strip;
uint8_t use_msix;
uint8_t started;
uint8_t modern;
uint8_t use_simple_rxtx;
uint8_t mac_addr[ETHER_ADDR_LEN];
uint32_t notify_off_multiplier;
uint8_t *isr;
uint16_t *notify_base;
struct rte_pci_device *dev;
struct virtio_pci_common_cfg *common_cfg;
struct virtio_net_config *dev_cfg;
const struct virtio_pci_ops *vtpci_ops;
void *virtio_user_dev;
};
/*
* This structure is just a reference to read
* net device specific config space; it just a chodu structure
*
*/
struct virtio_net_config {
/* The config defining mac address (if VIRTIO_NET_F_MAC) */
uint8_t mac[ETHER_ADDR_LEN];
/* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
uint16_t status;
uint16_t max_virtqueue_pairs;
} __attribute__((packed));
/*
* How many bits to shift physical queue address written to QUEUE_PFN.
* 12 is historical, and due to x86 page size.
*/
#define VIRTIO_PCI_QUEUE_ADDR_SHIFT 12
/* The alignment to use between consumer and producer parts of vring. */
#define VIRTIO_PCI_VRING_ALIGN 4096
static inline int
vtpci_with_feature(struct virtio_hw *hw, uint64_t bit)
{
return (hw->guest_features & (1ULL << bit)) != 0;
}
/*
* Function declaration from virtio_pci.c
*/
int vtpci_init(struct rte_pci_device *, struct virtio_hw *,
uint32_t *dev_flags);
void vtpci_reset(struct virtio_hw *);
void vtpci_reinit_complete(struct virtio_hw *);
uint8_t vtpci_get_status(struct virtio_hw *);
void vtpci_set_status(struct virtio_hw *, uint8_t);
uint64_t vtpci_negotiate_features(struct virtio_hw *, uint64_t);
void vtpci_write_dev_config(struct virtio_hw *, size_t, const void *, int);
void vtpci_read_dev_config(struct virtio_hw *, size_t, void *, int);
uint8_t vtpci_isr(struct virtio_hw *);
uint16_t vtpci_irq_config(struct virtio_hw *, uint16_t);
#endif /* _VIRTIO_PCI_H_ */
Reference in New Issue View Git Blame Copy Permalink