numam-dpdk/app/test/test_pmd_ring.c
David Marchand 7822c43aba app/test: only build what has been selected in config
Avoid building tests if their counterparts are not selected in config.
This has the nice side effect of fixing build errors when disabling parts of
the dpdk.

Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
2014-08-26 17:52:34 +02:00

451 lines
12 KiB
C

/*-
* BSD LICENSE
*
* Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "test.h"
#include <stdio.h>
#include <rte_eth_ring.h>
#include <rte_ethdev.h>
static struct rte_mempool *mp;
#define TX_PORT 0
#define RX_PORT 1
#define RXTX_PORT 2
#define RXTX_PORT2 3
#define RXTX_PORT3 4
#define SOCKET0 0
#define RING_SIZE 256
#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
#define NB_MBUF 512
static int
test_ethdev_configure(void)
{
struct rte_eth_conf null_conf;
struct rte_eth_link link;
memset(&null_conf, 0, sizeof(struct rte_eth_conf));
if ((TX_PORT >= RTE_MAX_ETHPORTS) || (RX_PORT >= RTE_MAX_ETHPORTS)\
|| (RXTX_PORT >= RTE_MAX_ETHPORTS)) {
printf(" TX/RX port exceed max eth ports\n");
return -1;
}
if (rte_eth_dev_configure(TX_PORT, 1, 2, &null_conf) < 0) {
printf("Configure failed for TX port\n");
return -1;
}
/* Test queue release */
if (rte_eth_dev_configure(TX_PORT, 1, 1, &null_conf) < 0) {
printf("Configure failed for TX port\n");
return -1;
}
if (rte_eth_dev_configure(RX_PORT, 1, 1, &null_conf) < 0) {
printf("Configure failed for RX port\n");
return -1;
}
if (rte_eth_dev_configure(RXTX_PORT, 1, 1, &null_conf) < 0) {
printf("Configure failed for RXTX port\n");
return -1;
}
if (rte_eth_tx_queue_setup(TX_PORT, 0, RING_SIZE, SOCKET0, NULL) < 0) {
printf("TX queue setup failed\n");
return -1;
}
if (rte_eth_rx_queue_setup(RX_PORT, 0, RING_SIZE, SOCKET0,
NULL, mp) < 0) {
printf("RX queue setup failed\n");
return -1;
}
if (rte_eth_tx_queue_setup(RXTX_PORT, 0, RING_SIZE, SOCKET0, NULL) < 0) {
printf("TX queue setup failed\n");
return -1;
}
if (rte_eth_rx_queue_setup(RXTX_PORT, 0, RING_SIZE, SOCKET0,
NULL, mp) < 0) {
printf("RX queue setup failed\n");
return -1;
}
if (rte_eth_dev_start(TX_PORT) < 0) {
printf("Error starting TX port\n");
return -1;
}
if (rte_eth_dev_start(RX_PORT) < 0) {
printf("Error starting RX port\n");
return -1;
}
if (rte_eth_dev_start(RXTX_PORT) < 0) {
printf("Error starting RX port\n");
return -1;
}
rte_eth_link_get(TX_PORT, &link);
rte_eth_link_get(RX_PORT, &link);
rte_eth_link_get(RXTX_PORT, &link);
return 0;
}
static int
test_send_basic_packets(void)
{
struct rte_mbuf bufs[RING_SIZE];
struct rte_mbuf *pbufs[RING_SIZE];
int i;
printf("Testing ring pmd RX/TX\n");
for (i = 0; i < RING_SIZE/2; i++)
pbufs[i] = &bufs[i];
if (rte_eth_tx_burst(TX_PORT, 0, pbufs, RING_SIZE/2) < RING_SIZE/2) {
printf("Failed to transmit packet burst\n");
return -1;
}
if (rte_eth_rx_burst(RX_PORT, 0, pbufs, RING_SIZE) != RING_SIZE/2) {
printf("Failed to receive packet burst\n");
return -1;
}
for (i = 0; i < RING_SIZE/2; i++)
if (pbufs[i] != &bufs[i]) {
printf("Error: received data does not match that transmitted\n");
return -1;
}
return 0;
}
static int
test_get_stats(void)
{
struct rte_eth_stats stats;
struct rte_mbuf buf, *pbuf = &buf;
printf("Testing ring PMD stats\n");
/* check stats of RXTX port, should all be zero */
rte_eth_stats_get(RXTX_PORT, &stats);
if (stats.ipackets != 0 || stats.opackets != 0 ||
stats.ibytes != 0 || stats.obytes != 0 ||
stats.ierrors != 0 || stats.oerrors != 0) {
printf("Error: RXTX port stats are not zero\n");
return -1;
}
/* send and receive 1 packet and check for stats update */
if (rte_eth_tx_burst(RXTX_PORT, 0, &pbuf, 1) != 1) {
printf("Error sending packet to RXTX port\n");
return -1;
}
if (rte_eth_rx_burst(RXTX_PORT, 0, &pbuf, 1) != 1) {
printf("Error receiving packet from RXTX port\n");
return -1;
}
rte_eth_stats_get(RXTX_PORT, &stats);
if (stats.ipackets != 1 || stats.opackets != 1 ||
stats.ibytes != 0 || stats.obytes != 0 ||
stats.ierrors != 0 || stats.oerrors != 0) {
printf("Error: RXTX port stats are not as expected\n");
return -1;
}
return 0;
}
static int
test_stats_reset(void)
{
struct rte_eth_stats stats;
struct rte_mbuf buf, *pbuf = &buf;
printf("Testing ring PMD stats reset\n");
rte_eth_stats_reset(RXTX_PORT);
/* check stats of RXTX port, should all be zero */
rte_eth_stats_get(RXTX_PORT, &stats);
if (stats.ipackets != 0 || stats.opackets != 0 ||
stats.ibytes != 0 || stats.obytes != 0 ||
stats.ierrors != 0 || stats.oerrors != 0) {
printf("Error: RXTX port stats are not zero\n");
return -1;
}
/* send and receive 1 packet and check for stats update */
if (rte_eth_tx_burst(RXTX_PORT, 0, &pbuf, 1) != 1) {
printf("Error sending packet to RXTX port\n");
return -1;
}
if (rte_eth_rx_burst(RXTX_PORT, 0, &pbuf, 1) != 1) {
printf("Error receiving packet from RXTX port\n");
return -1;
}
rte_eth_stats_get(RXTX_PORT, &stats);
if (stats.ipackets != 1 || stats.opackets != 1 ||
stats.ibytes != 0 || stats.obytes != 0 ||
stats.ierrors != 0 || stats.oerrors != 0) {
printf("Error: RXTX port stats are not as expected\n");
return -1;
}
rte_eth_stats_reset(RXTX_PORT);
/* check stats of RXTX port, should all be zero */
rte_eth_stats_get(RXTX_PORT, &stats);
if (stats.ipackets != 0 || stats.opackets != 0 ||
stats.ibytes != 0 || stats.obytes != 0 ||
stats.ierrors != 0 || stats.oerrors != 0) {
printf("Error: RXTX port stats are not zero\n");
return -1;
}
return 0;
}
static int
test_pmd_ring_pair_create_attach(void)
{
struct rte_eth_stats stats, stats2;
struct rte_mbuf buf, *pbuf = &buf;
struct rte_eth_conf null_conf;
if ((RXTX_PORT2 >= RTE_MAX_ETHPORTS) || (RXTX_PORT3 >= RTE_MAX_ETHPORTS)) {
printf(" TX/RX port exceed max eth ports\n");
return -1;
}
if ((rte_eth_dev_configure(RXTX_PORT2, 1, 1, &null_conf) < 0)
|| (rte_eth_dev_configure(RXTX_PORT3, 1, 1, &null_conf) < 0)) {
printf("Configure failed for RXTX port\n");
return -1;
}
if ((rte_eth_tx_queue_setup(RXTX_PORT2, 0, RING_SIZE, SOCKET0, NULL) < 0)
|| (rte_eth_tx_queue_setup(RXTX_PORT3, 0, RING_SIZE, SOCKET0, NULL) < 0)) {
printf("TX queue setup failed\n");
return -1;
}
if ((rte_eth_rx_queue_setup(RXTX_PORT2, 0, RING_SIZE, SOCKET0, NULL, mp) < 0)
|| (rte_eth_rx_queue_setup(RXTX_PORT3, 0, RING_SIZE, SOCKET0, NULL, mp) < 0)) {
printf("RX queue setup failed\n");
return -1;
}
if ((rte_eth_dev_start(RXTX_PORT2) < 0)
|| (rte_eth_dev_start(RXTX_PORT3) < 0)) {
printf("Error starting RXTX port\n");
return -1;
}
/*
* send and receive 1 packet (RXTX_PORT2 -> RXTX_PORT3)
* and check for stats update
*/
if (rte_eth_tx_burst(RXTX_PORT2, 0, &pbuf, 1) != 1) {
printf("Error sending packet to RXTX port\n");
return -1;
}
if (rte_eth_rx_burst(RXTX_PORT3, 0, &pbuf, 1) != 1) {
printf("Error receiving packet from RXTX port\n");
return -1;
}
rte_eth_stats_get(RXTX_PORT2, &stats);
rte_eth_stats_get(RXTX_PORT3, &stats2);
if (stats.ipackets != 0 || stats.opackets != 1 ||
stats.ibytes != 0 || stats.obytes != 0 ||
stats.ierrors != 0 || stats.oerrors != 0) {
printf("Error: RXTX port stats are not as expected\n");
return -1;
}
if (stats2.ipackets != 1 || stats2.opackets != 0 ||
stats2.ibytes != 0 || stats2.obytes != 0 ||
stats2.ierrors != 0 || stats2.oerrors != 0) {
printf("Error: RXTX port stats are not as expected\n");
return -1;
}
/*
* send and receive 1 packet (RXTX_PORT3 -> RXTX_PORT2)
* and check for stats update
*/
if (rte_eth_tx_burst(RXTX_PORT3, 0, &pbuf, 1) != 1) {
printf("Error sending packet to RXTX port\n");
return -1;
}
if (rte_eth_rx_burst(RXTX_PORT2, 0, &pbuf, 1) != 1) {
printf("Error receiving packet from RXTX port\n");
return -1;
}
rte_eth_stats_get(RXTX_PORT2, &stats);
rte_eth_stats_get(RXTX_PORT3, &stats2);
if (stats.ipackets != 1 || stats.opackets != 1 ||
stats.ibytes != 0 || stats.obytes != 0 ||
stats.ierrors != 0 || stats.oerrors != 0) {
printf("Error: RXTX port stats are not as expected\n");
return -1;
}
if (stats2.ipackets != 1 || stats2.opackets != 1 ||
stats2.ibytes != 0 || stats2.obytes != 0 ||
stats2.ierrors != 0 || stats2.oerrors != 0) {
printf("Error: RXTX port stats are not as expected\n");
return -1;
}
/*
* send and receive 1 packet (RXTX_PORT2 -> RXTX_PORT2)
* and check for stats update
*/
if (rte_eth_tx_burst(RXTX_PORT2, 0, &pbuf, 1) != 1) {
printf("Error sending packet to RXTX port\n");
return -1;
}
if (rte_eth_rx_burst(RXTX_PORT2, 0, &pbuf, 1) != 1) {
printf("Error receiving packet from RXTX port\n");
return -1;
}
rte_eth_stats_get(RXTX_PORT2, &stats);
rte_eth_stats_get(RXTX_PORT3, &stats2);
if (stats.ipackets != 2 || stats.opackets != 2 ||
stats.ibytes != 0 || stats.obytes != 0 ||
stats.ierrors != 0 || stats.oerrors != 0) {
printf("Error: RXTX port stats are not as expected\n");
return -1;
}
if (stats2.ipackets != 1 || stats2.opackets != 1 ||
stats2.ibytes != 0 || stats2.obytes != 0 ||
stats2.ierrors != 0 || stats2.oerrors != 0) {
printf("Error: RXTX port stats are not as expected\n");
return -1;
}
/*
* send and receive 1 packet (RXTX_PORT3 -> RXTX_PORT3)
* and check for stats update
*/
if (rte_eth_tx_burst(RXTX_PORT3, 0, &pbuf, 1) != 1) {
printf("Error sending packet to RXTX port\n");
return -1;
}
if (rte_eth_rx_burst(RXTX_PORT3, 0, &pbuf, 1) != 1) {
printf("Error receiving packet from RXTX port\n");
return -1;
}
rte_eth_stats_get(RXTX_PORT2, &stats);
rte_eth_stats_get(RXTX_PORT3, &stats2);
if (stats.ipackets != 2 || stats.opackets != 2 ||
stats.ibytes != 0 || stats.obytes != 0 ||
stats.ierrors != 0 || stats.oerrors != 0) {
printf("Error: RXTX port stats are not as expected\n");
return -1;
}
if (stats2.ipackets != 2 || stats2.opackets != 2 ||
stats2.ibytes != 0 || stats2.obytes != 0 ||
stats2.ierrors != 0 || stats2.oerrors != 0) {
printf("Error: RXTX port stats are not as expected\n");
return -1;
}
rte_eth_dev_stop(RXTX_PORT2);
rte_eth_dev_stop(RXTX_PORT3);
return 0;
}
static int
test_pmd_ring(void)
{
mp = rte_mempool_create("mbuf_pool", NB_MBUF,
MBUF_SIZE, 32,
sizeof(struct rte_pktmbuf_pool_private),
rte_pktmbuf_pool_init, NULL,
rte_pktmbuf_init, NULL,
rte_socket_id(), 0);
if (mp == NULL)
return -1;
if ((TX_PORT >= RTE_MAX_ETHPORTS) || (RX_PORT >= RTE_MAX_ETHPORTS)\
|| (RXTX_PORT >= RTE_MAX_ETHPORTS)) {
printf(" TX/RX port exceed max eth ports\n");
return -1;
}
if (test_ethdev_configure() < 0)
return -1;
if (test_send_basic_packets() < 0)
return -1;
if (test_get_stats() < 0)
return -1;
if (test_stats_reset() < 0)
return -1;
rte_eth_dev_stop(RX_PORT);
rte_eth_dev_stop(TX_PORT);
rte_eth_dev_stop(RXTX_PORT);
if (test_pmd_ring_pair_create_attach() < 0)
return -1;
return 0;
}
static struct test_command ring_pmd_cmd = {
.command = "ring_pmd_autotest",
.callback = test_pmd_ring,
};
REGISTER_TEST_COMMAND(ring_pmd_cmd);