numam-dpdk/drivers/net/qede/base/eth_common.h
Rasesh Mody 7ed1cd53db net/qede/base: update HSI
Update hardware software common base driver code in preparation to
update the firmware to version 8.40.25.0.

Signed-off-by: Rasesh Mody <rmody@marvell.com>
2019-10-23 16:43:09 +02:00

747 lines
25 KiB
C

/* SPDX-License-Identifier: BSD-3-Clause
* Copyright (c) 2016 - 2018 Cavium Inc.
* All rights reserved.
* www.cavium.com
*/
#ifndef __ETH_COMMON__
#define __ETH_COMMON__
/********************/
/* ETH FW CONSTANTS */
/********************/
/* FP HSI version. FP HSI is compatible if (fwVer.major == drvVer.major &&
* fwVer.minor >= drvVer.minor)
*/
/* ETH FP HSI Major version */
#define ETH_HSI_VER_MAJOR 3
/* ETH FP HSI Minor version */
#define ETH_HSI_VER_MINOR 11 /* ETH FP HSI Minor version */
/* Alias for 8.7.x.x/8.8.x.x ETH FP HSI MINOR version. In this version driver
* is not required to set pkt_len field in eth_tx_1st_bd struct, and tunneling
* offload is not supported.
*/
#define ETH_HSI_VER_NO_PKT_LEN_TUNN 5
/* Maximum number of pinned L2 connections (CIDs)*/
#define ETH_PINNED_CONN_MAX_NUM 32
#define ETH_CACHE_LINE_SIZE 64
#define ETH_RX_CQE_GAP 32
#define ETH_MAX_RAMROD_PER_CON 8
#define ETH_TX_BD_PAGE_SIZE_BYTES 4096
#define ETH_RX_BD_PAGE_SIZE_BYTES 4096
#define ETH_RX_CQE_PAGE_SIZE_BYTES 4096
#define ETH_RX_NUM_NEXT_PAGE_BDS 2
/* Limitation for Tunneled LSO Packets on the offset (in bytes) of the inner IP
* header (relevant to LSO for tunneled packet):
*/
/* Offset is limited to 253 bytes (inclusive). */
#define ETH_MAX_TUNN_LSO_INNER_IPV4_OFFSET 253
/* Offset is limited to 251 bytes (inclusive). */
#define ETH_MAX_TUNN_LSO_INNER_IPV6_OFFSET 251
#define ETH_TX_MIN_BDS_PER_NON_LSO_PKT 1
#define ETH_TX_MAX_BDS_PER_NON_LSO_PACKET 18
#define ETH_TX_MAX_BDS_PER_LSO_PACKET 255
#define ETH_TX_MAX_LSO_HDR_NBD 4
#define ETH_TX_MIN_BDS_PER_LSO_PKT 3
#define ETH_TX_MIN_BDS_PER_TUNN_IPV6_WITH_EXT_PKT 3
#define ETH_TX_MIN_BDS_PER_IPV6_WITH_EXT_PKT 2
#define ETH_TX_MIN_BDS_PER_PKT_W_LOOPBACK_MODE 2
#define ETH_TX_MIN_BDS_PER_PKT_W_VPORT_FORWARDING 4
/* (QM_REG_TASKBYTECRDCOST_0, QM_VOQ_BYTE_CRD_TASK_COST) -
* (VLAN-TAG + CRC + IPG + PREAMBLE)
*/
#define ETH_TX_MAX_NON_LSO_PKT_LEN (9700 - (4 + 4 + 12 + 8))
#define ETH_TX_MAX_LSO_HDR_BYTES 510
/* Number of BDs to consider for LSO sliding window restriction is
* (ETH_TX_LSO_WINDOW_BDS_NUM - hdr_nbd)
*/
#define ETH_TX_LSO_WINDOW_BDS_NUM (18 - 1)
/* Minimum data length (in bytes) in LSO sliding window */
#define ETH_TX_LSO_WINDOW_MIN_LEN 9700
/* Maximum LSO packet TCP payload length (in bytes) */
#define ETH_TX_MAX_LSO_PAYLOAD_LEN 0xFE000
/* Number of same-as-last resources in tx switching */
#define ETH_TX_NUM_SAME_AS_LAST_ENTRIES 320
/* Value for a connection for which same as last feature is disabled */
#define ETH_TX_INACTIVE_SAME_AS_LAST 0xFFFF
/* Maximum number of statistics counters */
#define ETH_NUM_STATISTIC_COUNTERS MAX_NUM_VPORTS
/* Maximum number of statistics counters when doubled VF zone used */
#define ETH_NUM_STATISTIC_COUNTERS_DOUBLE_VF_ZONE \
(ETH_NUM_STATISTIC_COUNTERS - MAX_NUM_VFS / 2)
/* Maximum number of statistics counters when quad VF zone used */
#define ETH_NUM_STATISTIC_COUNTERS_QUAD_VF_ZONE \
(ETH_NUM_STATISTIC_COUNTERS - 3 * MAX_NUM_VFS / 4)
/* Maximum number of buffers, used for RX packet placement */
#define ETH_RX_MAX_BUFF_PER_PKT 5
/* Minimum number of free BDs in RX ring, that guarantee receiving of at least
* one RX packet.
*/
#define ETH_RX_BD_THRESHOLD 16
/* num of MAC/VLAN filters */
#define ETH_NUM_MAC_FILTERS 512
#define ETH_NUM_VLAN_FILTERS 512
/* approx. multicast constants */
/* CRC seed for multicast bin calculation */
#define ETH_MULTICAST_BIN_FROM_MAC_SEED 0
#define ETH_MULTICAST_MAC_BINS 256
#define ETH_MULTICAST_MAC_BINS_IN_REGS (ETH_MULTICAST_MAC_BINS / 32)
/* ethernet vport update constants */
#define ETH_FILTER_RULES_COUNT 10
/* number of RSS indirection table entries, per Vport) */
#define ETH_RSS_IND_TABLE_ENTRIES_NUM 128
/* Length of RSS key (in regs) */
#define ETH_RSS_KEY_SIZE_REGS 10
/* number of available RSS engines in AH */
#define ETH_RSS_ENGINE_NUM_K2 207
/* number of available RSS engines in BB */
#define ETH_RSS_ENGINE_NUM_BB 127
/* TPA constants */
/* Maximum number of open TPA aggregations */
#define ETH_TPA_MAX_AGGS_NUM 64
/* TPA-start CQE additional BD list length. Used for backward compatible */
#define ETH_TPA_CQE_START_BW_LEN_LIST_SIZE 2
/* Maximum number of buffers, reported by TPA-continue CQE */
#define ETH_TPA_CQE_CONT_LEN_LIST_SIZE 6
/* Maximum number of buffers, reported by TPA-end CQE */
#define ETH_TPA_CQE_END_LEN_LIST_SIZE 4
/* Control frame check constants */
/* Number of etherType values configured by driver for control frame check */
#define ETH_CTL_FRAME_ETH_TYPE_NUM 4
/* GFS constants */
#define ETH_GFT_TRASHCAN_VPORT 0x1FF /* GFT drop flow vport number */
/*
* Destination port mode
*/
enum dst_port_mode {
DST_PORT_PHY /* Send to physical port. */,
DST_PORT_LOOPBACK /* Send to loopback port. */,
DST_PORT_PHY_LOOPBACK /* Send to physical and loopback port. */,
DST_PORT_DROP /* Drop the packet in PBF. */,
MAX_DST_PORT_MODE
};
/*
* Ethernet address type
*/
enum eth_addr_type {
BROADCAST_ADDRESS,
MULTICAST_ADDRESS,
UNICAST_ADDRESS,
UNKNOWN_ADDRESS,
MAX_ETH_ADDR_TYPE
};
struct eth_tx_1st_bd_flags {
u8 bitfields;
/* Set to 1 in the first BD. (for debug) */
#define ETH_TX_1ST_BD_FLAGS_START_BD_MASK 0x1
#define ETH_TX_1ST_BD_FLAGS_START_BD_SHIFT 0
/* Do not allow additional VLAN manipulations on this packet. */
#define ETH_TX_1ST_BD_FLAGS_FORCE_VLAN_MODE_MASK 0x1
#define ETH_TX_1ST_BD_FLAGS_FORCE_VLAN_MODE_SHIFT 1
/* Recalculate IP checksum. For tunneled packet - relevant to inner header. */
#define ETH_TX_1ST_BD_FLAGS_IP_CSUM_MASK 0x1
#define ETH_TX_1ST_BD_FLAGS_IP_CSUM_SHIFT 2
/* Recalculate TCP/UDP checksum.
* For tunneled packet - relevant to inner header.
*/
#define ETH_TX_1ST_BD_FLAGS_L4_CSUM_MASK 0x1
#define ETH_TX_1ST_BD_FLAGS_L4_CSUM_SHIFT 3
/* If set, insert VLAN tag from vlan field to the packet.
* For tunneled packet - relevant to outer header.
*/
#define ETH_TX_1ST_BD_FLAGS_VLAN_INSERTION_MASK 0x1
#define ETH_TX_1ST_BD_FLAGS_VLAN_INSERTION_SHIFT 4
/* If set, this is an LSO packet. Note: For Tunneled LSO packets, the offset of
* the inner IPV4 (and IPV6) header is limited to 253 (and 251 respectively)
* bytes, inclusive.
*/
#define ETH_TX_1ST_BD_FLAGS_LSO_MASK 0x1
#define ETH_TX_1ST_BD_FLAGS_LSO_SHIFT 5
/* Recalculate Tunnel IP Checksum (if Tunnel IP Header is IPv4) */
#define ETH_TX_1ST_BD_FLAGS_TUNN_IP_CSUM_MASK 0x1
#define ETH_TX_1ST_BD_FLAGS_TUNN_IP_CSUM_SHIFT 6
/* Recalculate Tunnel UDP/GRE Checksum (Depending on Tunnel Type) */
#define ETH_TX_1ST_BD_FLAGS_TUNN_L4_CSUM_MASK 0x1
/* Recalculate Tunnel UDP/GRE Checksum (Depending on Tunnel Type). In case of
* GRE tunnel, this flag means GRE CSO, and in this case GRE checksum field
* Must be present.
*/
#define ETH_TX_1ST_BD_FLAGS_TUNN_L4_CSUM_MASK 0x1
#define ETH_TX_1ST_BD_FLAGS_TUNN_L4_CSUM_SHIFT 7
};
/*
* The parsing information data for the first tx bd of a given packet.
*/
struct eth_tx_data_1st_bd {
/* VLAN tag to insert to packet (if enabled by vlan_insertion flag). */
__le16 vlan;
/* Number of BDs in packet. Should be at least 1 in non-LSO packet and at least
* 3 in LSO (or Tunnel with IPv6+ext) packet.
*/
u8 nbds;
struct eth_tx_1st_bd_flags bd_flags;
__le16 bitfields;
/* Indicates a tunneled packet. Must be set for encapsulated packet. */
#define ETH_TX_DATA_1ST_BD_TUNN_FLAG_MASK 0x1
#define ETH_TX_DATA_1ST_BD_TUNN_FLAG_SHIFT 0
#define ETH_TX_DATA_1ST_BD_RESERVED0_MASK 0x1
#define ETH_TX_DATA_1ST_BD_RESERVED0_SHIFT 1
/* Total packet length - must be filled for non-LSO packets. */
#define ETH_TX_DATA_1ST_BD_PKT_LEN_MASK 0x3FFF
#define ETH_TX_DATA_1ST_BD_PKT_LEN_SHIFT 2
};
/*
* The parsing information data for the second tx bd of a given packet.
*/
struct eth_tx_data_2nd_bd {
/* For tunnel with IPv6+ext - Tunnel header IP datagram length (in BYTEs) */
__le16 tunn_ip_size;
__le16 bitfields1;
/* For Tunnel header with IPv6 ext. - Inner L2 Header Size (in 2-byte WORDs) */
#define ETH_TX_DATA_2ND_BD_TUNN_INNER_L2_HDR_SIZE_W_MASK 0xF
#define ETH_TX_DATA_2ND_BD_TUNN_INNER_L2_HDR_SIZE_W_SHIFT 0
/* For Tunnel header with IPv6 ext. - Inner L2 Header MAC DA Type
* (use enum eth_addr_type)
*/
#define ETH_TX_DATA_2ND_BD_TUNN_INNER_ETH_TYPE_MASK 0x3
#define ETH_TX_DATA_2ND_BD_TUNN_INNER_ETH_TYPE_SHIFT 4
/* Destination port mode. (use enum dest_port_mode) */
#define ETH_TX_DATA_2ND_BD_DEST_PORT_MODE_MASK 0x3
#define ETH_TX_DATA_2ND_BD_DEST_PORT_MODE_SHIFT 6
/* Should be 0 in all the BDs, except the first one. (for debug) */
#define ETH_TX_DATA_2ND_BD_START_BD_MASK 0x1
#define ETH_TX_DATA_2ND_BD_START_BD_SHIFT 8
/* For Tunnel header with IPv6 ext. - Tunnel Type (use enum eth_tx_tunn_type) */
#define ETH_TX_DATA_2ND_BD_TUNN_TYPE_MASK 0x3
#define ETH_TX_DATA_2ND_BD_TUNN_TYPE_SHIFT 9
/* For LSO / Tunnel header with IPv6+ext - Set if inner header is IPv6 */
#define ETH_TX_DATA_2ND_BD_TUNN_INNER_IPV6_MASK 0x1
#define ETH_TX_DATA_2ND_BD_TUNN_INNER_IPV6_SHIFT 11
/* In tunneling mode - Set to 1 when the Inner header is IPv6 with extension.
* Otherwise set to 1 if the header is IPv6 with extension.
*/
#define ETH_TX_DATA_2ND_BD_IPV6_EXT_MASK 0x1
#define ETH_TX_DATA_2ND_BD_IPV6_EXT_SHIFT 12
/* Set to 1 if Tunnel (outer = encapsulating) header has IPv6 ext. (Note: 3rd BD
* is required, hence EDPM does not support Tunnel [outer] header with Ipv6Ext)
*/
#define ETH_TX_DATA_2ND_BD_TUNN_IPV6_EXT_MASK 0x1
#define ETH_TX_DATA_2ND_BD_TUNN_IPV6_EXT_SHIFT 13
/* Set if (inner) L4 protocol is UDP. (Required when IPv6+ext (or tunnel with
* inner or outer Ipv6+ext) and l4_csum is set)
*/
#define ETH_TX_DATA_2ND_BD_L4_UDP_MASK 0x1
#define ETH_TX_DATA_2ND_BD_L4_UDP_SHIFT 14
/* The pseudo header checksum type in the L4 checksum field. Required when
* IPv6+ext and l4_csum is set. (use enum eth_l4_pseudo_checksum_mode)
*/
#define ETH_TX_DATA_2ND_BD_L4_PSEUDO_CSUM_MODE_MASK 0x1
#define ETH_TX_DATA_2ND_BD_L4_PSEUDO_CSUM_MODE_SHIFT 15
__le16 bitfields2;
/* For inner/outer header IPv6+ext - (inner) L4 header offset (in 2-byte WORDs).
* For regular packet - offset from the beginning of the packet. For tunneled
* packet - offset from the beginning of the inner header
*/
#define ETH_TX_DATA_2ND_BD_L4_HDR_START_OFFSET_W_MASK 0x1FFF
#define ETH_TX_DATA_2ND_BD_L4_HDR_START_OFFSET_W_SHIFT 0
#define ETH_TX_DATA_2ND_BD_RESERVED0_MASK 0x7
#define ETH_TX_DATA_2ND_BD_RESERVED0_SHIFT 13
};
/*
* Firmware data for L2-EDPM packet.
*/
struct eth_edpm_fw_data {
/* Parsing information data from the 1st BD. */
struct eth_tx_data_1st_bd data_1st_bd;
/* Parsing information data from the 2nd BD. */
struct eth_tx_data_2nd_bd data_2nd_bd;
__le32 reserved;
};
/*
* FW debug.
*/
struct eth_fast_path_cqe_fw_debug {
__le16 reserved2 /* FW reserved. */;
};
/*
* tunneling parsing flags
*/
struct eth_tunnel_parsing_flags {
u8 flags;
/* 0 - no tunneling, 1 - GENEVE, 2 - GRE, 3 - VXLAN
* (use enum eth_rx_tunn_type)
*/
#define ETH_TUNNEL_PARSING_FLAGS_TYPE_MASK 0x3
#define ETH_TUNNEL_PARSING_FLAGS_TYPE_SHIFT 0
/* If it s not an encapsulated packet then put 0x0. If it s an encapsulated
* packet but the tenant-id doesn t exist then put 0x0. Else put 0x1
*
*/
#define ETH_TUNNEL_PARSING_FLAGS_TENNANT_ID_EXIST_MASK 0x1
#define ETH_TUNNEL_PARSING_FLAGS_TENNANT_ID_EXIST_SHIFT 2
/* Type of the next header above the tunneling: 0 - unknown, 1 - L2, 2 - Ipv4,
* 3 - IPv6 (use enum tunnel_next_protocol)
*/
#define ETH_TUNNEL_PARSING_FLAGS_NEXT_PROTOCOL_MASK 0x3
#define ETH_TUNNEL_PARSING_FLAGS_NEXT_PROTOCOL_SHIFT 3
/* The result of comparing the DA-ip of the tunnel header. */
#define ETH_TUNNEL_PARSING_FLAGS_FIRSTHDRIPMATCH_MASK 0x1
#define ETH_TUNNEL_PARSING_FLAGS_FIRSTHDRIPMATCH_SHIFT 5
#define ETH_TUNNEL_PARSING_FLAGS_IPV4_FRAGMENT_MASK 0x1
#define ETH_TUNNEL_PARSING_FLAGS_IPV4_FRAGMENT_SHIFT 6
#define ETH_TUNNEL_PARSING_FLAGS_IPV4_OPTIONS_MASK 0x1
#define ETH_TUNNEL_PARSING_FLAGS_IPV4_OPTIONS_SHIFT 7
};
/*
* PMD flow control bits
*/
struct eth_pmd_flow_flags {
u8 flags;
#define ETH_PMD_FLOW_FLAGS_VALID_MASK 0x1 /* CQE valid bit */
#define ETH_PMD_FLOW_FLAGS_VALID_SHIFT 0
#define ETH_PMD_FLOW_FLAGS_TOGGLE_MASK 0x1 /* CQE ring toggle bit */
#define ETH_PMD_FLOW_FLAGS_TOGGLE_SHIFT 1
#define ETH_PMD_FLOW_FLAGS_RESERVED_MASK 0x3F
#define ETH_PMD_FLOW_FLAGS_RESERVED_SHIFT 2
};
/*
* Regular ETH Rx FP CQE.
*/
struct eth_fast_path_rx_reg_cqe {
u8 type /* CQE type */;
u8 bitfields;
/* Type of calculated RSS hash (use enum rss_hash_type) */
#define ETH_FAST_PATH_RX_REG_CQE_RSS_HASH_TYPE_MASK 0x7
#define ETH_FAST_PATH_RX_REG_CQE_RSS_HASH_TYPE_SHIFT 0
/* Traffic Class */
#define ETH_FAST_PATH_RX_REG_CQE_TC_MASK 0xF
#define ETH_FAST_PATH_RX_REG_CQE_TC_SHIFT 3
#define ETH_FAST_PATH_RX_REG_CQE_RESERVED0_MASK 0x1
#define ETH_FAST_PATH_RX_REG_CQE_RESERVED0_SHIFT 7
__le16 pkt_len /* Total packet length (from the parser) */;
/* Parsing and error flags from the parser */
struct parsing_and_err_flags pars_flags;
__le16 vlan_tag /* 802.1q VLAN tag */;
__le32 rss_hash /* RSS hash result */;
__le16 len_on_first_bd /* Number of bytes placed on first BD */;
u8 placement_offset /* Offset of placement from BD start */;
/* Tunnel Parsing Flags */
struct eth_tunnel_parsing_flags tunnel_pars_flags;
u8 bd_num /* Number of BDs, used for packet */;
u8 reserved;
__le16 reserved2;
/* aRFS flow ID or Resource ID - Indicates a Vport ID from which packet was
* sent, used when sending from VF to VF Representor.
*/
__le32 flow_id_or_resource_id;
u8 reserved1[7];
struct eth_pmd_flow_flags pmd_flags /* CQE valid and toggle bits */;
};
/*
* TPA-continue ETH Rx FP CQE.
*/
struct eth_fast_path_rx_tpa_cont_cqe {
u8 type /* CQE type */;
u8 tpa_agg_index /* TPA aggregation index */;
/* List of the segment sizes */
__le16 len_list[ETH_TPA_CQE_CONT_LEN_LIST_SIZE];
u8 reserved;
u8 reserved1 /* FW reserved. */;
__le16 reserved2[ETH_TPA_CQE_CONT_LEN_LIST_SIZE] /* FW reserved. */;
u8 reserved3[3];
struct eth_pmd_flow_flags pmd_flags /* CQE valid and toggle bits */;
};
/*
* TPA-end ETH Rx FP CQE .
*/
struct eth_fast_path_rx_tpa_end_cqe {
u8 type /* CQE type */;
u8 tpa_agg_index /* TPA aggregation index */;
__le16 total_packet_len /* Total aggregated packet length */;
u8 num_of_bds /* Total number of BDs comprising the packet */;
/* Aggregation end reason. Use enum eth_tpa_end_reason */
u8 end_reason;
__le16 num_of_coalesced_segs /* Number of coalesced TCP segments */;
__le32 ts_delta /* TCP timestamp delta */;
/* List of the segment sizes */
__le16 len_list[ETH_TPA_CQE_END_LEN_LIST_SIZE];
__le16 reserved3[ETH_TPA_CQE_END_LEN_LIST_SIZE] /* FW reserved. */;
__le16 reserved1;
u8 reserved2 /* FW reserved. */;
struct eth_pmd_flow_flags pmd_flags /* CQE valid and toggle bits */;
};
/*
* TPA-start ETH Rx FP CQE.
*/
struct eth_fast_path_rx_tpa_start_cqe {
u8 type /* CQE type */;
u8 bitfields;
/* Type of calculated RSS hash (use enum rss_hash_type) */
#define ETH_FAST_PATH_RX_TPA_START_CQE_RSS_HASH_TYPE_MASK 0x7
#define ETH_FAST_PATH_RX_TPA_START_CQE_RSS_HASH_TYPE_SHIFT 0
/* Traffic Class */
#define ETH_FAST_PATH_RX_TPA_START_CQE_TC_MASK 0xF
#define ETH_FAST_PATH_RX_TPA_START_CQE_TC_SHIFT 3
#define ETH_FAST_PATH_RX_TPA_START_CQE_RESERVED0_MASK 0x1
#define ETH_FAST_PATH_RX_TPA_START_CQE_RESERVED0_SHIFT 7
__le16 seg_len /* Segment length (packetLen from the parser) */;
/* Parsing and error flags from the parser */
struct parsing_and_err_flags pars_flags;
__le16 vlan_tag /* 802.1q VLAN tag */;
__le32 rss_hash /* RSS hash result */;
__le16 len_on_first_bd /* Number of bytes placed on first BD */;
u8 placement_offset /* Offset of placement from BD start */;
/* Tunnel Parsing Flags */
struct eth_tunnel_parsing_flags tunnel_pars_flags;
u8 tpa_agg_index /* TPA aggregation index */;
u8 header_len /* Packet L2+L3+L4 header length */;
/* Additional BDs length list. Used for backward compatible. */
__le16 bw_ext_bd_len_list[ETH_TPA_CQE_START_BW_LEN_LIST_SIZE];
__le16 reserved2;
/* aRFS or GFS flow ID or Resource ID - Indicates a Vport ID from which packet
* was sent, used when sending from VF to VF Representor
*/
__le32 flow_id_or_resource_id;
u8 reserved[3];
struct eth_pmd_flow_flags pmd_flags /* CQE valid and toggle bits */;
};
/*
* The L4 pseudo checksum mode for Ethernet
*/
enum eth_l4_pseudo_checksum_mode {
/* Pseudo Header checksum on packet is calculated with the correct packet length
* field.
*/
ETH_L4_PSEUDO_CSUM_CORRECT_LENGTH,
/* Pseudo Header checksum on packet is calculated with zero length field. */
ETH_L4_PSEUDO_CSUM_ZERO_LENGTH,
MAX_ETH_L4_PSEUDO_CHECKSUM_MODE
};
struct eth_rx_bd {
struct regpair addr /* single continues buffer */;
};
/*
* regular ETH Rx SP CQE
*/
struct eth_slow_path_rx_cqe {
u8 type /* CQE type */;
u8 ramrod_cmd_id;
u8 error_flag;
u8 reserved[25];
__le16 echo;
u8 reserved1;
struct eth_pmd_flow_flags pmd_flags /* CQE valid and toggle bits */;
};
/*
* union for all ETH Rx CQE types
*/
union eth_rx_cqe {
/* Regular FP CQE */
struct eth_fast_path_rx_reg_cqe fast_path_regular;
/* TPA-start CQE */
struct eth_fast_path_rx_tpa_start_cqe fast_path_tpa_start;
/* TPA-continue CQE */
struct eth_fast_path_rx_tpa_cont_cqe fast_path_tpa_cont;
/* TPA-end CQE */
struct eth_fast_path_rx_tpa_end_cqe fast_path_tpa_end;
struct eth_slow_path_rx_cqe slow_path /* SP CQE */;
};
/*
* ETH Rx CQE type
*/
enum eth_rx_cqe_type {
ETH_RX_CQE_TYPE_UNUSED,
ETH_RX_CQE_TYPE_REGULAR /* Regular FP ETH Rx CQE */,
ETH_RX_CQE_TYPE_SLOW_PATH /* Slow path ETH Rx CQE */,
ETH_RX_CQE_TYPE_TPA_START /* TPA start ETH Rx CQE */,
ETH_RX_CQE_TYPE_TPA_CONT /* TPA Continue ETH Rx CQE */,
ETH_RX_CQE_TYPE_TPA_END /* TPA end ETH Rx CQE */,
MAX_ETH_RX_CQE_TYPE
};
/*
* Wrapper for PD RX CQE - used in order to cover full cache line when writing
* CQE
*/
struct eth_rx_pmd_cqe {
union eth_rx_cqe cqe /* CQE data itself */;
u8 reserved[ETH_RX_CQE_GAP];
};
/*
* Eth RX Tunnel Type
*/
enum eth_rx_tunn_type {
ETH_RX_NO_TUNN /* No Tunnel. */,
ETH_RX_TUNN_GENEVE /* GENEVE Tunnel. */,
ETH_RX_TUNN_GRE /* GRE Tunnel. */,
ETH_RX_TUNN_VXLAN /* VXLAN Tunnel. */,
MAX_ETH_RX_TUNN_TYPE
};
/*
* Aggregation end reason.
*/
enum eth_tpa_end_reason {
ETH_AGG_END_UNUSED,
ETH_AGG_END_SP_UPDATE /* SP configuration update */,
/* Maximum aggregation length or maximum buffer number used. */
ETH_AGG_END_MAX_LEN,
/* TCP PSH flag or TCP payload length below continue threshold. */
ETH_AGG_END_LAST_SEG,
ETH_AGG_END_TIMEOUT /* Timeout expiration. */,
/* Packet header not consistency: different IPv4 TOS, TTL or flags, IPv6 TC,
* Hop limit or Flow label, TCP header length or TS options. In GRO different
* TS value, SMAC, DMAC, ackNum, windowSize or VLAN
*/
ETH_AGG_END_NOT_CONSISTENT,
/* Out of order or retransmission packet: sequence, ack or timestamp not
* consistent with previous segment.
*/
ETH_AGG_END_OUT_OF_ORDER,
/* Next segment cant be aggregated due to LLC/SNAP, IP error, IP fragment, IPv4
* options, IPv6 extension, IP ECN = CE, TCP errors, TCP options, zero TCP
* payload length , TCP flags or not supported tunnel header options.
*/
ETH_AGG_END_NON_TPA_SEG,
MAX_ETH_TPA_END_REASON
};
/*
* The first tx bd of a given packet
*/
struct eth_tx_1st_bd {
struct regpair addr /* Single continuous buffer */;
__le16 nbytes /* Number of bytes in this BD. */;
struct eth_tx_data_1st_bd data /* Parsing information data. */;
};
/*
* The second tx bd of a given packet
*/
struct eth_tx_2nd_bd {
struct regpair addr /* Single continuous buffer */;
__le16 nbytes /* Number of bytes in this BD. */;
struct eth_tx_data_2nd_bd data /* Parsing information data. */;
};
/*
* The parsing information data for the third tx bd of a given packet.
*/
struct eth_tx_data_3rd_bd {
__le16 lso_mss /* For LSO packet - the MSS in bytes. */;
__le16 bitfields;
/* For LSO with inner/outer IPv6+ext - TCP header length (in 4-byte WORDs) */
#define ETH_TX_DATA_3RD_BD_TCP_HDR_LEN_DW_MASK 0xF
#define ETH_TX_DATA_3RD_BD_TCP_HDR_LEN_DW_SHIFT 0
/* LSO - number of BDs which contain headers. value should be in range
* (1..ETH_TX_MAX_LSO_HDR_NBD).
*/
#define ETH_TX_DATA_3RD_BD_HDR_NBD_MASK 0xF
#define ETH_TX_DATA_3RD_BD_HDR_NBD_SHIFT 4
/* Should be 0 in all the BDs, except the first one. (for debug) */
#define ETH_TX_DATA_3RD_BD_START_BD_MASK 0x1
#define ETH_TX_DATA_3RD_BD_START_BD_SHIFT 8
#define ETH_TX_DATA_3RD_BD_RESERVED0_MASK 0x7F
#define ETH_TX_DATA_3RD_BD_RESERVED0_SHIFT 9
/* For tunnel with IPv6+ext - Pointer to tunnel L4 Header (in 2-byte WORDs) */
u8 tunn_l4_hdr_start_offset_w;
/* For tunnel with IPv6+ext - Total size of Tunnel Header (in 2-byte WORDs) */
u8 tunn_hdr_size_w;
};
/*
* The third tx bd of a given packet
*/
struct eth_tx_3rd_bd {
struct regpair addr /* Single continuous buffer */;
__le16 nbytes /* Number of bytes in this BD. */;
struct eth_tx_data_3rd_bd data /* Parsing information data. */;
};
/*
* The parsing information data for the forth tx bd of a given packet.
*/
struct eth_tx_data_4th_bd {
/* Destination Vport ID to forward the packet, applicable only when
* tx_dst_port_mode_config == ETH_TX_DST_MODE_CONFIG_FORWARD_DATA_IN_BD and
* dst_port_mode == DST_PORT_LOOPBACK, used to route the packet from VF
* Representor to VF
*/
u8 dst_vport_id;
u8 reserved4;
__le16 bitfields;
/* if set, dst_vport_id has a valid value and will be used in FW */
#define ETH_TX_DATA_4TH_BD_DST_VPORT_ID_VALID_MASK 0x1
#define ETH_TX_DATA_4TH_BD_DST_VPORT_ID_VALID_SHIFT 0
#define ETH_TX_DATA_4TH_BD_RESERVED1_MASK 0x7F
#define ETH_TX_DATA_4TH_BD_RESERVED1_SHIFT 1
/* Should be 0 in all the BDs, except the first one. (for debug) */
#define ETH_TX_DATA_4TH_BD_START_BD_MASK 0x1
#define ETH_TX_DATA_4TH_BD_START_BD_SHIFT 8
#define ETH_TX_DATA_4TH_BD_RESERVED2_MASK 0x7F
#define ETH_TX_DATA_4TH_BD_RESERVED2_SHIFT 9
__le16 reserved3;
};
/*
* The forth tx bd of a given packet
*/
struct eth_tx_4th_bd {
struct regpair addr /* Single continuous buffer */;
__le16 nbytes /* Number of bytes in this BD. */;
struct eth_tx_data_4th_bd data /* Parsing information data. */;
};
/*
* Complementary information for the regular tx bd of a given packet.
*/
struct eth_tx_data_bd {
__le16 reserved0;
__le16 bitfields;
#define ETH_TX_DATA_BD_RESERVED1_MASK 0xFF
#define ETH_TX_DATA_BD_RESERVED1_SHIFT 0
/* Should be 0 in all the BDs, except the first one. (for debug) */
#define ETH_TX_DATA_BD_START_BD_MASK 0x1
#define ETH_TX_DATA_BD_START_BD_SHIFT 8
#define ETH_TX_DATA_BD_RESERVED2_MASK 0x7F
#define ETH_TX_DATA_BD_RESERVED2_SHIFT 9
__le16 reserved3;
};
/*
* The common regular TX BD ring element
*/
struct eth_tx_bd {
struct regpair addr /* Single continuous buffer */;
__le16 nbytes /* Number of bytes in this BD. */;
struct eth_tx_data_bd data /* Complementary information. */;
};
union eth_tx_bd_types {
struct eth_tx_1st_bd first_bd /* The first tx bd of a given packet */;
/* The second tx bd of a given packet */
struct eth_tx_2nd_bd second_bd;
struct eth_tx_3rd_bd third_bd /* The third tx bd of a given packet */;
struct eth_tx_4th_bd fourth_bd /* The fourth tx bd of a given packet */;
struct eth_tx_bd reg_bd /* The common regular bd */;
};
/*
* Eth Tx Tunnel Type
*/
enum eth_tx_tunn_type {
ETH_TX_TUNN_GENEVE /* GENEVE Tunnel. */,
ETH_TX_TUNN_TTAG /* T-Tag Tunnel. */,
ETH_TX_TUNN_GRE /* GRE Tunnel. */,
ETH_TX_TUNN_VXLAN /* VXLAN Tunnel. */,
MAX_ETH_TX_TUNN_TYPE
};
/*
* Mstorm Queue Zone
*/
struct mstorm_eth_queue_zone {
struct eth_rx_prod_data rx_producers /* ETH Rx producers data */;
__le32 reserved[3];
};
/*
* Ystorm Queue Zone
*/
struct xstorm_eth_queue_zone {
/* Tx interrupt coalescing TimeSet */
struct coalescing_timeset int_coalescing_timeset;
u8 reserved[7];
};
/*
* ETH doorbell data
*/
struct eth_db_data {
u8 params;
/* destination of doorbell (use enum db_dest) */
#define ETH_DB_DATA_DEST_MASK 0x3
#define ETH_DB_DATA_DEST_SHIFT 0
/* aggregative command to CM (use enum db_agg_cmd_sel) */
#define ETH_DB_DATA_AGG_CMD_MASK 0x3
#define ETH_DB_DATA_AGG_CMD_SHIFT 2
#define ETH_DB_DATA_BYPASS_EN_MASK 0x1 /* enable QM bypass */
#define ETH_DB_DATA_BYPASS_EN_SHIFT 4
#define ETH_DB_DATA_RESERVED_MASK 0x1
#define ETH_DB_DATA_RESERVED_SHIFT 5
/* aggregative value selection */
#define ETH_DB_DATA_AGG_VAL_SEL_MASK 0x3
#define ETH_DB_DATA_AGG_VAL_SEL_SHIFT 6
/* bit for every DQ counter flags in CM context that DQ can increment */
u8 agg_flags;
__le16 bd_prod;
};
#endif /* __ETH_COMMON__ */