d/numam-dpdk
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
e12f553035
numam-dpdk/mk/rte.app.mk
Thomas Monjalon 785e1a0932 mk: revert "allow application to override clean" 
This reverts commit ca0038c009.

It forces clean target of application to have double-colon.
As stated in make doc:
	"Double-colon rules are somewhat obscure and not often very useful"
And it's not needed since POSTCLEAN allow to add some clean targets.

Reported-by: Olivier Matz <olivier.matz@6wind.com>
Reported-by: John Mcnamara <john.mcnamara@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2015-01-30 11:44:02 +01:00

354 lines
8.7 KiB
Makefile
Raw Blame History

# BSD LICENSE
#
# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
# Copyright(c) 2014 6WIND S.A.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# * Neither the name of Intel Corporation nor the names of its
# contributors may be used to endorse or promote products derived
# from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
include $(RTE_SDK)/mk/internal/rte.compile-pre.mk
include $(RTE_SDK)/mk/internal/rte.install-pre.mk
include $(RTE_SDK)/mk/internal/rte.clean-pre.mk
include $(RTE_SDK)/mk/internal/rte.build-pre.mk
include $(RTE_SDK)/mk/internal/rte.depdirs-pre.mk
# VPATH contains at least SRCDIR
VPATH += $(SRCDIR)
_BUILD = $(APP)
_INSTALL = $(INSTALL-FILES-y) $(SYMLINK-FILES-y)
_INSTALL += $(RTE_OUTPUT)/app/$(APP) $(RTE_OUTPUT)/app/$(APP).map
POSTINSTALL += target-appinstall
_CLEAN = doclean
POSTCLEAN += target-appclean
ifeq ($(NO_LDSCRIPT),)
LDSCRIPT = $(RTE_LDSCRIPT)
endif
# default path for libs
LDLIBS += -L$(RTE_SDK_BIN)/lib
#
# Include libraries depending on config if NO_AUTOLIBS is not set
# Order is important: from higher level to lower level
#
ifeq ($(NO_AUTOLIBS),)
LDLIBS += --whole-archive
ifeq ($(CONFIG_RTE_BUILD_COMBINE_LIBS),y)
LDLIBS += -l$(RTE_LIBNAME)
endif
ifeq ($(CONFIG_RTE_BUILD_COMBINE_LIBS),n)
ifeq ($(CONFIG_RTE_LIBRTE_DISTRIBUTOR),y)
LDLIBS += -lrte_distributor
endif
ifeq ($(CONFIG_RTE_LIBRTE_KNI),y)
ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
LDLIBS += -lrte_kni
endif
endif
ifeq ($(CONFIG_RTE_LIBRTE_IVSHMEM),y)
ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
LDLIBS += -lrte_ivshmem
endif
endif
ifeq ($(CONFIG_RTE_LIBRTE_PIPELINE),y)
LDLIBS += -lrte_pipeline
endif
ifeq ($(CONFIG_RTE_LIBRTE_TABLE),y)
LDLIBS += -lrte_table
endif
ifeq ($(CONFIG_RTE_LIBRTE_PORT),y)
LDLIBS += -lrte_port
endif
ifeq ($(CONFIG_RTE_LIBRTE_TIMER),y)
LDLIBS += -lrte_timer
endif
ifeq ($(CONFIG_RTE_LIBRTE_HASH),y)
LDLIBS += -lrte_hash
endif
ifeq ($(CONFIG_RTE_LIBRTE_LPM),y)
LDLIBS += -lrte_lpm
endif
ifeq ($(CONFIG_RTE_LIBRTE_POWER),y)
LDLIBS += -lrte_power
endif
ifeq ($(CONFIG_RTE_LIBRTE_ACL),y)
LDLIBS += -lrte_acl
endif
ifeq ($(CONFIG_RTE_LIBRTE_METER),y)
LDLIBS += -lrte_meter
endif
ifeq ($(CONFIG_RTE_LIBRTE_SCHED),y)
LDLIBS += -lrte_sched
LDLIBS += -lm
LDLIBS += -lrt
endif
endif # ! CONFIG_RTE_BUILD_COMBINE_LIBS
ifeq ($(CONFIG_RTE_LIBRTE_PMD_PCAP),y)
LDLIBS += -lpcap
endif
ifeq ($(CONFIG_RTE_LIBRTE_VHOST),y)
LDLIBS += -lfuse
endif
LDLIBS += --start-group
ifeq ($(CONFIG_RTE_BUILD_COMBINE_LIBS),n)
ifeq ($(CONFIG_RTE_LIBRTE_KVARGS),y)
LDLIBS += -lrte_kvargs
endif
ifeq ($(CONFIG_RTE_LIBRTE_MBUF),y)
LDLIBS += -lrte_mbuf
endif
ifeq ($(CONFIG_RTE_LIBRTE_IP_FRAG),y)
LDLIBS += -lrte_ip_frag
endif
ifeq ($(CONFIG_RTE_LIBRTE_ETHER),y)
LDLIBS += -lethdev
endif
ifeq ($(CONFIG_RTE_LIBRTE_MALLOC),y)
LDLIBS += -lrte_malloc
endif
ifeq ($(CONFIG_RTE_LIBRTE_MEMPOOL),y)
LDLIBS += -lrte_mempool
endif
ifeq ($(CONFIG_RTE_LIBRTE_RING),y)
LDLIBS += -lrte_ring
endif
ifeq ($(CONFIG_RTE_LIBRTE_EAL),y)
LDLIBS += -lrte_eal
endif
ifeq ($(CONFIG_RTE_LIBRTE_CMDLINE),y)
LDLIBS += -lrte_cmdline
endif
ifeq ($(CONFIG_RTE_LIBRTE_CFGFILE),y)
LDLIBS += -lrte_cfgfile
endif
ifeq ($(CONFIG_RTE_LIBRTE_PMD_BOND),y)
LDLIBS += -lrte_pmd_bond
endif
ifeq ($(CONFIG_RTE_LIBRTE_PMD_XENVIRT),y)
LDLIBS += -lrte_pmd_xenvirt
LDLIBS += -lxenstore
endif
ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),n)
# plugins (link only if static libraries)
ifeq ($(CONFIG_RTE_LIBRTE_VMXNET3_PMD),y)
LDLIBS += -lrte_pmd_vmxnet3_uio
endif
ifeq ($(CONFIG_RTE_LIBRTE_VIRTIO_PMD),y)
LDLIBS += -lrte_pmd_virtio_uio
endif
ifeq ($(CONFIG_RTE_LIBRTE_VHOST), y)
LDLIBS += -lrte_vhost
endif
ifeq ($(CONFIG_RTE_LIBRTE_ENIC_PMD),y)
LDLIBS += -lrte_pmd_enic
endif
ifeq ($(CONFIG_RTE_LIBRTE_I40E_PMD),y)
LDLIBS += -lrte_pmd_i40e
endif
ifeq ($(CONFIG_RTE_LIBRTE_IXGBE_PMD),y)
LDLIBS += -lrte_pmd_ixgbe
endif
ifeq ($(CONFIG_RTE_LIBRTE_E1000_PMD),y)
LDLIBS += -lrte_pmd_e1000
endif
ifeq ($(CONFIG_RTE_LIBRTE_PMD_RING),y)
LDLIBS += -lrte_pmd_ring
endif
ifeq ($(CONFIG_RTE_LIBRTE_PMD_PCAP),y)
LDLIBS += -lrte_pmd_pcap
endif
ifeq ($(CONFIG_RTE_LIBRTE_PMD_AF_PACKET),y)
LDLIBS += -lrte_pmd_af_packet
endif
endif # plugins
endif # ! CONFIG_RTE_BUILD_COMBINE_LIBS
LDLIBS += $(EXECENV_LDLIBS)
LDLIBS += --end-group
LDLIBS += --no-whole-archive
endif # ifeq ($(NO_AUTOLIBS),)
LDLIBS += $(CPU_LDLIBS)
.PHONY: all
all: install
.PHONY: install
install: build _postinstall
_postinstall: build
.PHONY: build
build: _postbuild
exe2cmd = $(strip $(call dotfile,$(patsubst %,%.cmd,$(1))))
ifeq ($(LINK_USING_CC),1)
override EXTRA_LDFLAGS := $(call linkerprefix,$(EXTRA_LDFLAGS))
O_TO_EXE = $(CC) $(CFLAGS) $(LDFLAGS_$(@)) \
-Wl,-Map=$(@).map,--cref -o $@ $(OBJS-y) $(call linkerprefix,$(LDFLAGS)) \
$(EXTRA_LDFLAGS) $(call linkerprefix,$(LDLIBS))
else
O_TO_EXE = $(LD) $(LDFLAGS) $(LDFLAGS_$(@)) $(EXTRA_LDFLAGS) \
-Map=$(@).map --cref -o $@ $(OBJS-y) $(LDLIBS)
endif
O_TO_EXE_STR = $(subst ','\'',$(O_TO_EXE)) #'# fix syntax highlight
O_TO_EXE_DISP = $(if $(V),"$(O_TO_EXE_STR)"," LD $(@)")
O_TO_EXE_CMD = "cmd_$@ = $(O_TO_EXE_STR)"
O_TO_EXE_DO = @set -e; \
echo $(O_TO_EXE_DISP); \
$(O_TO_EXE) && \
echo $(O_TO_EXE_CMD) > $(call exe2cmd,$(@))
-include .$(APP).cmd
# path where libraries are retrieved
LDLIBS_PATH := $(subst -Wl$(comma)-L,,$(filter -Wl$(comma)-L%,$(LDLIBS)))
LDLIBS_PATH += $(subst -L,,$(filter -L%,$(LDLIBS)))
# list of .a files that are linked to this application
LDLIBS_NAMES := $(patsubst -l%,lib%.a,$(filter -l%,$(LDLIBS)))
LDLIBS_NAMES += $(patsubst -Wl$(comma)-l%,lib%.a,$(filter -Wl$(comma)-l%,$(LDLIBS)))
# list of found libraries files (useful for deps). If not found, the
# library is silently ignored and dep won't be checked
LDLIBS_FILES := $(wildcard $(foreach dir,$(LDLIBS_PATH),\
$(addprefix $(dir)/,$(LDLIBS_NAMES))))
#
# Compile executable file if needed
#
$(APP): $(OBJS-y) $(LDLIBS_FILES) $(DEP_$(APP)) $(LDSCRIPT) FORCE
@[ -d $(dir $@) ] || mkdir -p $(dir $@)
$(if $(D),\
@echo -n "$< -> $@ " ; \
echo -n "file_missing=$(call boolean,$(file_missing)) " ; \
echo -n "cmdline_changed=$(call boolean,$(call cmdline_changed,$(O_TO_EXE_STR))) " ; \
echo -n "depfile_missing=$(call boolean,$(depfile_missing)) " ; \
echo "depfile_newer=$(call boolean,$(depfile_newer)) ")
$(if $(or \
$(file_missing),\
$(call cmdline_changed,$(O_TO_EXE_STR)),\
$(depfile_missing),\
$(depfile_newer)),\
$(O_TO_EXE_DO))
#
# install app in $(RTE_OUTPUT)/app
#
$(RTE_OUTPUT)/app/$(APP): $(APP)
@echo " INSTALL-APP $(APP)"
@[ -d $(RTE_OUTPUT)/app ] || mkdir -p $(RTE_OUTPUT)/app
$(Q)cp -f $(APP) $(RTE_OUTPUT)/app
#
# install app map file in $(RTE_OUTPUT)/app
#
$(RTE_OUTPUT)/app/$(APP).map: $(APP)
@echo " INSTALL-MAP $(APP).map"
@[ -d $(RTE_OUTPUT)/app ] || mkdir -p $(RTE_OUTPUT)/app
$(Q)cp -f $(APP).map $(RTE_OUTPUT)/app
#
# Clean all generated files
#
.PHONY: clean
clean: _postclean
$(Q)rm -f $(_BUILD_TARGETS) $(_INSTALL_TARGETS) $(_CLEAN_TARGETS)
.PHONY: doclean
doclean:
$(Q)rm -rf $(APP) $(OBJS-all) $(DEPS-all) $(DEPSTMP-all) \
$(CMDS-all) $(INSTALL-FILES-all) .$(APP).cmd
include $(RTE_SDK)/mk/internal/rte.compile-post.mk
include $(RTE_SDK)/mk/internal/rte.install-post.mk
include $(RTE_SDK)/mk/internal/rte.clean-post.mk
include $(RTE_SDK)/mk/internal/rte.build-post.mk
include $(RTE_SDK)/mk/internal/rte.depdirs-post.mk
ifneq ($(wildcard $(RTE_SDK)/mk/target/$(RTE_TARGET)/rte.app.mk),)
include $(RTE_SDK)/mk/target/$(RTE_TARGET)/rte.app.mk
else
include $(RTE_SDK)/mk/target/generic/rte.app.mk
endif
.PHONY: FORCE
FORCE:
Reference in New Issue View Git Blame Copy Permalink