fafa81dece
MAC PAUSE can take effect on a single TC or multiple TCs, depending on the hardware. For example, the Kunpeng 920 supports MAC pause in a single TC, and the Kunpeng 930 supports MAC pause in multiple TCs. This patch supports MAC PAUSE in multiple TC for some hardware. Signed-off-by: Huisong Li <lihuisong@huawei.com> Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
7584 lines
199 KiB
C
7584 lines
199 KiB
C
/* SPDX-License-Identifier: BSD-3-Clause
|
|
* Copyright(c) 2018-2021 HiSilicon Limited.
|
|
*/
|
|
|
|
#include <rte_alarm.h>
|
|
#include <rte_bus_pci.h>
|
|
#include <ethdev_pci.h>
|
|
#include <rte_pci.h>
|
|
#include <rte_kvargs.h>
|
|
|
|
#include "hns3_ethdev.h"
|
|
#include "hns3_logs.h"
|
|
#include "hns3_rxtx.h"
|
|
#include "hns3_intr.h"
|
|
#include "hns3_regs.h"
|
|
#include "hns3_dcb.h"
|
|
#include "hns3_mp.h"
|
|
|
|
#define HNS3_SERVICE_INTERVAL 1000000 /* us */
|
|
#define HNS3_SERVICE_QUICK_INTERVAL 10
|
|
#define HNS3_INVALID_PVID 0xFFFF
|
|
|
|
#define HNS3_FILTER_TYPE_VF 0
|
|
#define HNS3_FILTER_TYPE_PORT 1
|
|
#define HNS3_FILTER_FE_EGRESS_V1_B BIT(0)
|
|
#define HNS3_FILTER_FE_NIC_INGRESS_B BIT(0)
|
|
#define HNS3_FILTER_FE_NIC_EGRESS_B BIT(1)
|
|
#define HNS3_FILTER_FE_ROCE_INGRESS_B BIT(2)
|
|
#define HNS3_FILTER_FE_ROCE_EGRESS_B BIT(3)
|
|
#define HNS3_FILTER_FE_EGRESS (HNS3_FILTER_FE_NIC_EGRESS_B \
|
|
| HNS3_FILTER_FE_ROCE_EGRESS_B)
|
|
#define HNS3_FILTER_FE_INGRESS (HNS3_FILTER_FE_NIC_INGRESS_B \
|
|
| HNS3_FILTER_FE_ROCE_INGRESS_B)
|
|
|
|
/* Reset related Registers */
|
|
#define HNS3_GLOBAL_RESET_BIT 0
|
|
#define HNS3_CORE_RESET_BIT 1
|
|
#define HNS3_IMP_RESET_BIT 2
|
|
#define HNS3_FUN_RST_ING_B 0
|
|
|
|
#define HNS3_VECTOR0_IMP_RESET_INT_B 1
|
|
#define HNS3_VECTOR0_IMP_CMDQ_ERR_B 4U
|
|
#define HNS3_VECTOR0_IMP_RD_POISON_B 5U
|
|
#define HNS3_VECTOR0_ALL_MSIX_ERR_B 6U
|
|
|
|
#define HNS3_RESET_WAIT_MS 100
|
|
#define HNS3_RESET_WAIT_CNT 200
|
|
|
|
/* FEC mode order defined in HNS3 hardware */
|
|
#define HNS3_HW_FEC_MODE_NOFEC 0
|
|
#define HNS3_HW_FEC_MODE_BASER 1
|
|
#define HNS3_HW_FEC_MODE_RS 2
|
|
|
|
enum hns3_evt_cause {
|
|
HNS3_VECTOR0_EVENT_RST,
|
|
HNS3_VECTOR0_EVENT_MBX,
|
|
HNS3_VECTOR0_EVENT_ERR,
|
|
HNS3_VECTOR0_EVENT_PTP,
|
|
HNS3_VECTOR0_EVENT_OTHER,
|
|
};
|
|
|
|
static const struct rte_eth_fec_capa speed_fec_capa_tbl[] = {
|
|
{ ETH_SPEED_NUM_10G, RTE_ETH_FEC_MODE_CAPA_MASK(NOFEC) |
|
|
RTE_ETH_FEC_MODE_CAPA_MASK(AUTO) |
|
|
RTE_ETH_FEC_MODE_CAPA_MASK(BASER) },
|
|
|
|
{ ETH_SPEED_NUM_25G, RTE_ETH_FEC_MODE_CAPA_MASK(NOFEC) |
|
|
RTE_ETH_FEC_MODE_CAPA_MASK(AUTO) |
|
|
RTE_ETH_FEC_MODE_CAPA_MASK(BASER) |
|
|
RTE_ETH_FEC_MODE_CAPA_MASK(RS) },
|
|
|
|
{ ETH_SPEED_NUM_40G, RTE_ETH_FEC_MODE_CAPA_MASK(NOFEC) |
|
|
RTE_ETH_FEC_MODE_CAPA_MASK(AUTO) |
|
|
RTE_ETH_FEC_MODE_CAPA_MASK(BASER) },
|
|
|
|
{ ETH_SPEED_NUM_50G, RTE_ETH_FEC_MODE_CAPA_MASK(NOFEC) |
|
|
RTE_ETH_FEC_MODE_CAPA_MASK(AUTO) |
|
|
RTE_ETH_FEC_MODE_CAPA_MASK(BASER) |
|
|
RTE_ETH_FEC_MODE_CAPA_MASK(RS) },
|
|
|
|
{ ETH_SPEED_NUM_100G, RTE_ETH_FEC_MODE_CAPA_MASK(NOFEC) |
|
|
RTE_ETH_FEC_MODE_CAPA_MASK(AUTO) |
|
|
RTE_ETH_FEC_MODE_CAPA_MASK(RS) },
|
|
|
|
{ ETH_SPEED_NUM_200G, RTE_ETH_FEC_MODE_CAPA_MASK(NOFEC) |
|
|
RTE_ETH_FEC_MODE_CAPA_MASK(AUTO) |
|
|
RTE_ETH_FEC_MODE_CAPA_MASK(RS) }
|
|
};
|
|
|
|
static enum hns3_reset_level hns3_get_reset_level(struct hns3_adapter *hns,
|
|
uint64_t *levels);
|
|
static int hns3_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
|
|
static int hns3_vlan_pvid_configure(struct hns3_adapter *hns, uint16_t pvid,
|
|
int on);
|
|
static int hns3_update_link_info(struct rte_eth_dev *eth_dev);
|
|
static bool hns3_update_link_status(struct hns3_hw *hw);
|
|
|
|
static int hns3_add_mc_addr(struct hns3_hw *hw,
|
|
struct rte_ether_addr *mac_addr);
|
|
static int hns3_remove_mc_addr(struct hns3_hw *hw,
|
|
struct rte_ether_addr *mac_addr);
|
|
static int hns3_restore_fec(struct hns3_hw *hw);
|
|
static int hns3_query_dev_fec_info(struct hns3_hw *hw);
|
|
static int hns3_do_stop(struct hns3_adapter *hns);
|
|
static int hns3_check_port_speed(struct hns3_hw *hw, uint32_t link_speeds);
|
|
|
|
void hns3_ether_format_addr(char *buf, uint16_t size,
|
|
const struct rte_ether_addr *ether_addr)
|
|
{
|
|
snprintf(buf, size, "%02X:**:**:**:%02X:%02X",
|
|
ether_addr->addr_bytes[0],
|
|
ether_addr->addr_bytes[4],
|
|
ether_addr->addr_bytes[5]);
|
|
}
|
|
|
|
static void
|
|
hns3_pf_disable_irq0(struct hns3_hw *hw)
|
|
{
|
|
hns3_write_dev(hw, HNS3_MISC_VECTOR_REG_BASE, 0);
|
|
}
|
|
|
|
static void
|
|
hns3_pf_enable_irq0(struct hns3_hw *hw)
|
|
{
|
|
hns3_write_dev(hw, HNS3_MISC_VECTOR_REG_BASE, 1);
|
|
}
|
|
|
|
static enum hns3_evt_cause
|
|
hns3_proc_imp_reset_event(struct hns3_adapter *hns, bool is_delay,
|
|
uint32_t *vec_val)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
|
|
__atomic_store_n(&hw->reset.disable_cmd, 1, __ATOMIC_RELAXED);
|
|
hns3_atomic_set_bit(HNS3_IMP_RESET, &hw->reset.pending);
|
|
*vec_val = BIT(HNS3_VECTOR0_IMPRESET_INT_B);
|
|
if (!is_delay) {
|
|
hw->reset.stats.imp_cnt++;
|
|
hns3_warn(hw, "IMP reset detected, clear reset status");
|
|
} else {
|
|
hns3_schedule_delayed_reset(hns);
|
|
hns3_warn(hw, "IMP reset detected, don't clear reset status");
|
|
}
|
|
|
|
return HNS3_VECTOR0_EVENT_RST;
|
|
}
|
|
|
|
static enum hns3_evt_cause
|
|
hns3_proc_global_reset_event(struct hns3_adapter *hns, bool is_delay,
|
|
uint32_t *vec_val)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
|
|
__atomic_store_n(&hw->reset.disable_cmd, 1, __ATOMIC_RELAXED);
|
|
hns3_atomic_set_bit(HNS3_GLOBAL_RESET, &hw->reset.pending);
|
|
*vec_val = BIT(HNS3_VECTOR0_GLOBALRESET_INT_B);
|
|
if (!is_delay) {
|
|
hw->reset.stats.global_cnt++;
|
|
hns3_warn(hw, "Global reset detected, clear reset status");
|
|
} else {
|
|
hns3_schedule_delayed_reset(hns);
|
|
hns3_warn(hw,
|
|
"Global reset detected, don't clear reset status");
|
|
}
|
|
|
|
return HNS3_VECTOR0_EVENT_RST;
|
|
}
|
|
|
|
static enum hns3_evt_cause
|
|
hns3_check_event_cause(struct hns3_adapter *hns, uint32_t *clearval)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
uint32_t vector0_int_stats;
|
|
uint32_t cmdq_src_val;
|
|
uint32_t hw_err_src_reg;
|
|
uint32_t val;
|
|
enum hns3_evt_cause ret;
|
|
bool is_delay;
|
|
|
|
/* fetch the events from their corresponding regs */
|
|
vector0_int_stats = hns3_read_dev(hw, HNS3_VECTOR0_OTHER_INT_STS_REG);
|
|
cmdq_src_val = hns3_read_dev(hw, HNS3_VECTOR0_CMDQ_SRC_REG);
|
|
hw_err_src_reg = hns3_read_dev(hw, HNS3_RAS_PF_OTHER_INT_STS_REG);
|
|
|
|
is_delay = clearval == NULL ? true : false;
|
|
/*
|
|
* Assumption: If by any chance reset and mailbox events are reported
|
|
* together then we will only process reset event and defer the
|
|
* processing of the mailbox events. Since, we would have not cleared
|
|
* RX CMDQ event this time we would receive again another interrupt
|
|
* from H/W just for the mailbox.
|
|
*/
|
|
if (BIT(HNS3_VECTOR0_IMPRESET_INT_B) & vector0_int_stats) { /* IMP */
|
|
ret = hns3_proc_imp_reset_event(hns, is_delay, &val);
|
|
goto out;
|
|
}
|
|
|
|
/* Global reset */
|
|
if (BIT(HNS3_VECTOR0_GLOBALRESET_INT_B) & vector0_int_stats) {
|
|
ret = hns3_proc_global_reset_event(hns, is_delay, &val);
|
|
goto out;
|
|
}
|
|
|
|
/* Check for vector0 1588 event source */
|
|
if (BIT(HNS3_VECTOR0_1588_INT_B) & vector0_int_stats) {
|
|
val = BIT(HNS3_VECTOR0_1588_INT_B);
|
|
ret = HNS3_VECTOR0_EVENT_PTP;
|
|
goto out;
|
|
}
|
|
|
|
/* check for vector0 msix event source */
|
|
if (vector0_int_stats & HNS3_VECTOR0_REG_MSIX_MASK ||
|
|
hw_err_src_reg & HNS3_RAS_REG_NFE_MASK) {
|
|
val = vector0_int_stats | hw_err_src_reg;
|
|
ret = HNS3_VECTOR0_EVENT_ERR;
|
|
goto out;
|
|
}
|
|
|
|
/* check for vector0 mailbox(=CMDQ RX) event source */
|
|
if (BIT(HNS3_VECTOR0_RX_CMDQ_INT_B) & cmdq_src_val) {
|
|
cmdq_src_val &= ~BIT(HNS3_VECTOR0_RX_CMDQ_INT_B);
|
|
val = cmdq_src_val;
|
|
ret = HNS3_VECTOR0_EVENT_MBX;
|
|
goto out;
|
|
}
|
|
|
|
val = vector0_int_stats;
|
|
ret = HNS3_VECTOR0_EVENT_OTHER;
|
|
out:
|
|
|
|
if (clearval)
|
|
*clearval = val;
|
|
return ret;
|
|
}
|
|
|
|
static bool
|
|
hns3_is_1588_event_type(uint32_t event_type)
|
|
{
|
|
return (event_type == HNS3_VECTOR0_EVENT_PTP);
|
|
}
|
|
|
|
static void
|
|
hns3_clear_event_cause(struct hns3_hw *hw, uint32_t event_type, uint32_t regclr)
|
|
{
|
|
if (event_type == HNS3_VECTOR0_EVENT_RST ||
|
|
hns3_is_1588_event_type(event_type))
|
|
hns3_write_dev(hw, HNS3_MISC_RESET_STS_REG, regclr);
|
|
else if (event_type == HNS3_VECTOR0_EVENT_MBX)
|
|
hns3_write_dev(hw, HNS3_VECTOR0_CMDQ_SRC_REG, regclr);
|
|
}
|
|
|
|
static void
|
|
hns3_clear_all_event_cause(struct hns3_hw *hw)
|
|
{
|
|
uint32_t vector0_int_stats;
|
|
|
|
vector0_int_stats = hns3_read_dev(hw, HNS3_VECTOR0_OTHER_INT_STS_REG);
|
|
if (BIT(HNS3_VECTOR0_IMPRESET_INT_B) & vector0_int_stats)
|
|
hns3_warn(hw, "Probe during IMP reset interrupt");
|
|
|
|
if (BIT(HNS3_VECTOR0_GLOBALRESET_INT_B) & vector0_int_stats)
|
|
hns3_warn(hw, "Probe during Global reset interrupt");
|
|
|
|
hns3_clear_event_cause(hw, HNS3_VECTOR0_EVENT_RST,
|
|
BIT(HNS3_VECTOR0_IMPRESET_INT_B) |
|
|
BIT(HNS3_VECTOR0_GLOBALRESET_INT_B) |
|
|
BIT(HNS3_VECTOR0_CORERESET_INT_B));
|
|
hns3_clear_event_cause(hw, HNS3_VECTOR0_EVENT_MBX, 0);
|
|
hns3_clear_event_cause(hw, HNS3_VECTOR0_EVENT_PTP,
|
|
BIT(HNS3_VECTOR0_1588_INT_B));
|
|
}
|
|
|
|
static void
|
|
hns3_handle_mac_tnl(struct hns3_hw *hw)
|
|
{
|
|
struct hns3_cmd_desc desc;
|
|
uint32_t status;
|
|
int ret;
|
|
|
|
/* query and clear mac tnl interrupt */
|
|
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_QUERY_MAC_TNL_INT, true);
|
|
ret = hns3_cmd_send(hw, &desc, 1);
|
|
if (ret) {
|
|
hns3_err(hw, "failed to query mac tnl int, ret = %d.", ret);
|
|
return;
|
|
}
|
|
|
|
status = rte_le_to_cpu_32(desc.data[0]);
|
|
if (status) {
|
|
hns3_warn(hw, "mac tnl int occurs, status = 0x%x.", status);
|
|
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_CLEAR_MAC_TNL_INT,
|
|
false);
|
|
desc.data[0] = rte_cpu_to_le_32(HNS3_MAC_TNL_INT_CLR);
|
|
ret = hns3_cmd_send(hw, &desc, 1);
|
|
if (ret)
|
|
hns3_err(hw, "failed to clear mac tnl int, ret = %d.",
|
|
ret);
|
|
}
|
|
}
|
|
|
|
static void
|
|
hns3_interrupt_handler(void *param)
|
|
{
|
|
struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
|
|
struct hns3_adapter *hns = dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
enum hns3_evt_cause event_cause;
|
|
uint32_t clearval = 0;
|
|
uint32_t vector0_int;
|
|
uint32_t ras_int;
|
|
uint32_t cmdq_int;
|
|
|
|
/* Disable interrupt */
|
|
hns3_pf_disable_irq0(hw);
|
|
|
|
event_cause = hns3_check_event_cause(hns, &clearval);
|
|
vector0_int = hns3_read_dev(hw, HNS3_VECTOR0_OTHER_INT_STS_REG);
|
|
ras_int = hns3_read_dev(hw, HNS3_RAS_PF_OTHER_INT_STS_REG);
|
|
cmdq_int = hns3_read_dev(hw, HNS3_VECTOR0_CMDQ_SRC_REG);
|
|
/* vector 0 interrupt is shared with reset and mailbox source events. */
|
|
if (event_cause == HNS3_VECTOR0_EVENT_ERR) {
|
|
hns3_warn(hw, "received interrupt: vector0_int_stat:0x%x "
|
|
"ras_int_stat:0x%x cmdq_int_stat:0x%x",
|
|
vector0_int, ras_int, cmdq_int);
|
|
hns3_handle_mac_tnl(hw);
|
|
hns3_handle_error(hns);
|
|
} else if (event_cause == HNS3_VECTOR0_EVENT_RST) {
|
|
hns3_warn(hw, "received reset interrupt");
|
|
hns3_schedule_reset(hns);
|
|
} else if (event_cause == HNS3_VECTOR0_EVENT_MBX) {
|
|
hns3_dev_handle_mbx_msg(hw);
|
|
} else {
|
|
hns3_warn(hw, "received unknown event: vector0_int_stat:0x%x "
|
|
"ras_int_stat:0x%x cmdq_int_stat:0x%x",
|
|
vector0_int, ras_int, cmdq_int);
|
|
}
|
|
|
|
hns3_clear_event_cause(hw, event_cause, clearval);
|
|
/* Enable interrupt if it is not cause by reset */
|
|
hns3_pf_enable_irq0(hw);
|
|
}
|
|
|
|
static int
|
|
hns3_set_port_vlan_filter(struct hns3_adapter *hns, uint16_t vlan_id, int on)
|
|
{
|
|
#define HNS3_VLAN_ID_OFFSET_STEP 160
|
|
#define HNS3_VLAN_BYTE_SIZE 8
|
|
struct hns3_vlan_filter_pf_cfg_cmd *req;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
uint8_t vlan_offset_byte_val;
|
|
struct hns3_cmd_desc desc;
|
|
uint8_t vlan_offset_byte;
|
|
uint8_t vlan_offset_base;
|
|
int ret;
|
|
|
|
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_VLAN_FILTER_PF_CFG, false);
|
|
|
|
vlan_offset_base = vlan_id / HNS3_VLAN_ID_OFFSET_STEP;
|
|
vlan_offset_byte = (vlan_id % HNS3_VLAN_ID_OFFSET_STEP) /
|
|
HNS3_VLAN_BYTE_SIZE;
|
|
vlan_offset_byte_val = 1 << (vlan_id % HNS3_VLAN_BYTE_SIZE);
|
|
|
|
req = (struct hns3_vlan_filter_pf_cfg_cmd *)desc.data;
|
|
req->vlan_offset = vlan_offset_base;
|
|
req->vlan_cfg = on ? 0 : 1;
|
|
req->vlan_offset_bitmap[vlan_offset_byte] = vlan_offset_byte_val;
|
|
|
|
ret = hns3_cmd_send(hw, &desc, 1);
|
|
if (ret)
|
|
hns3_err(hw, "set port vlan id failed, vlan_id =%u, ret =%d",
|
|
vlan_id, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void
|
|
hns3_rm_dev_vlan_table(struct hns3_adapter *hns, uint16_t vlan_id)
|
|
{
|
|
struct hns3_user_vlan_table *vlan_entry;
|
|
struct hns3_pf *pf = &hns->pf;
|
|
|
|
LIST_FOREACH(vlan_entry, &pf->vlan_list, next) {
|
|
if (vlan_entry->vlan_id == vlan_id) {
|
|
if (vlan_entry->hd_tbl_status)
|
|
hns3_set_port_vlan_filter(hns, vlan_id, 0);
|
|
LIST_REMOVE(vlan_entry, next);
|
|
rte_free(vlan_entry);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
hns3_add_dev_vlan_table(struct hns3_adapter *hns, uint16_t vlan_id,
|
|
bool writen_to_tbl)
|
|
{
|
|
struct hns3_user_vlan_table *vlan_entry;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
struct hns3_pf *pf = &hns->pf;
|
|
|
|
LIST_FOREACH(vlan_entry, &pf->vlan_list, next) {
|
|
if (vlan_entry->vlan_id == vlan_id)
|
|
return;
|
|
}
|
|
|
|
vlan_entry = rte_zmalloc("hns3_vlan_tbl", sizeof(*vlan_entry), 0);
|
|
if (vlan_entry == NULL) {
|
|
hns3_err(hw, "Failed to malloc hns3 vlan table");
|
|
return;
|
|
}
|
|
|
|
vlan_entry->hd_tbl_status = writen_to_tbl;
|
|
vlan_entry->vlan_id = vlan_id;
|
|
|
|
LIST_INSERT_HEAD(&pf->vlan_list, vlan_entry, next);
|
|
}
|
|
|
|
static int
|
|
hns3_restore_vlan_table(struct hns3_adapter *hns)
|
|
{
|
|
struct hns3_user_vlan_table *vlan_entry;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
struct hns3_pf *pf = &hns->pf;
|
|
uint16_t vlan_id;
|
|
int ret = 0;
|
|
|
|
if (hw->port_base_vlan_cfg.state == HNS3_PORT_BASE_VLAN_ENABLE)
|
|
return hns3_vlan_pvid_configure(hns,
|
|
hw->port_base_vlan_cfg.pvid, 1);
|
|
|
|
LIST_FOREACH(vlan_entry, &pf->vlan_list, next) {
|
|
if (vlan_entry->hd_tbl_status) {
|
|
vlan_id = vlan_entry->vlan_id;
|
|
ret = hns3_set_port_vlan_filter(hns, vlan_id, 1);
|
|
if (ret)
|
|
break;
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_vlan_filter_configure(struct hns3_adapter *hns, uint16_t vlan_id, int on)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
bool writen_to_tbl = false;
|
|
int ret = 0;
|
|
|
|
/*
|
|
* When vlan filter is enabled, hardware regards packets without vlan
|
|
* as packets with vlan 0. So, to receive packets without vlan, vlan id
|
|
* 0 is not allowed to be removed by rte_eth_dev_vlan_filter.
|
|
*/
|
|
if (on == 0 && vlan_id == 0)
|
|
return 0;
|
|
|
|
/*
|
|
* When port base vlan enabled, we use port base vlan as the vlan
|
|
* filter condition. In this case, we don't update vlan filter table
|
|
* when user add new vlan or remove exist vlan, just update the
|
|
* vlan list. The vlan id in vlan list will be written in vlan filter
|
|
* table until port base vlan disabled
|
|
*/
|
|
if (hw->port_base_vlan_cfg.state == HNS3_PORT_BASE_VLAN_DISABLE) {
|
|
ret = hns3_set_port_vlan_filter(hns, vlan_id, on);
|
|
writen_to_tbl = true;
|
|
}
|
|
|
|
if (ret == 0) {
|
|
if (on)
|
|
hns3_add_dev_vlan_table(hns, vlan_id, writen_to_tbl);
|
|
else
|
|
hns3_rm_dev_vlan_table(hns, vlan_id);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
|
|
{
|
|
struct hns3_adapter *hns = dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int ret;
|
|
|
|
rte_spinlock_lock(&hw->lock);
|
|
ret = hns3_vlan_filter_configure(hns, vlan_id, on);
|
|
rte_spinlock_unlock(&hw->lock);
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_vlan_tpid_configure(struct hns3_adapter *hns, enum rte_vlan_type vlan_type,
|
|
uint16_t tpid)
|
|
{
|
|
struct hns3_rx_vlan_type_cfg_cmd *rx_req;
|
|
struct hns3_tx_vlan_type_cfg_cmd *tx_req;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
struct hns3_cmd_desc desc;
|
|
int ret;
|
|
|
|
if ((vlan_type != ETH_VLAN_TYPE_INNER &&
|
|
vlan_type != ETH_VLAN_TYPE_OUTER)) {
|
|
hns3_err(hw, "Unsupported vlan type, vlan_type =%d", vlan_type);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (tpid != RTE_ETHER_TYPE_VLAN) {
|
|
hns3_err(hw, "Unsupported vlan tpid, vlan_type =%d", vlan_type);
|
|
return -EINVAL;
|
|
}
|
|
|
|
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_MAC_VLAN_TYPE_ID, false);
|
|
rx_req = (struct hns3_rx_vlan_type_cfg_cmd *)desc.data;
|
|
|
|
if (vlan_type == ETH_VLAN_TYPE_OUTER) {
|
|
rx_req->ot_fst_vlan_type = rte_cpu_to_le_16(tpid);
|
|
rx_req->ot_sec_vlan_type = rte_cpu_to_le_16(tpid);
|
|
} else if (vlan_type == ETH_VLAN_TYPE_INNER) {
|
|
rx_req->ot_fst_vlan_type = rte_cpu_to_le_16(tpid);
|
|
rx_req->ot_sec_vlan_type = rte_cpu_to_le_16(tpid);
|
|
rx_req->in_fst_vlan_type = rte_cpu_to_le_16(tpid);
|
|
rx_req->in_sec_vlan_type = rte_cpu_to_le_16(tpid);
|
|
}
|
|
|
|
ret = hns3_cmd_send(hw, &desc, 1);
|
|
if (ret) {
|
|
hns3_err(hw, "Send rxvlan protocol type command fail, ret =%d",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_MAC_VLAN_INSERT, false);
|
|
|
|
tx_req = (struct hns3_tx_vlan_type_cfg_cmd *)desc.data;
|
|
tx_req->ot_vlan_type = rte_cpu_to_le_16(tpid);
|
|
tx_req->in_vlan_type = rte_cpu_to_le_16(tpid);
|
|
|
|
ret = hns3_cmd_send(hw, &desc, 1);
|
|
if (ret)
|
|
hns3_err(hw, "Send txvlan protocol type command fail, ret =%d",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_vlan_tpid_set(struct rte_eth_dev *dev, enum rte_vlan_type vlan_type,
|
|
uint16_t tpid)
|
|
{
|
|
struct hns3_adapter *hns = dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int ret;
|
|
|
|
rte_spinlock_lock(&hw->lock);
|
|
ret = hns3_vlan_tpid_configure(hns, vlan_type, tpid);
|
|
rte_spinlock_unlock(&hw->lock);
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_set_vlan_rx_offload_cfg(struct hns3_adapter *hns,
|
|
struct hns3_rx_vtag_cfg *vcfg)
|
|
{
|
|
struct hns3_vport_vtag_rx_cfg_cmd *req;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
struct hns3_cmd_desc desc;
|
|
uint16_t vport_id;
|
|
uint8_t bitmap;
|
|
int ret;
|
|
|
|
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_VLAN_PORT_RX_CFG, false);
|
|
|
|
req = (struct hns3_vport_vtag_rx_cfg_cmd *)desc.data;
|
|
hns3_set_bit(req->vport_vlan_cfg, HNS3_REM_TAG1_EN_B,
|
|
vcfg->strip_tag1_en ? 1 : 0);
|
|
hns3_set_bit(req->vport_vlan_cfg, HNS3_REM_TAG2_EN_B,
|
|
vcfg->strip_tag2_en ? 1 : 0);
|
|
hns3_set_bit(req->vport_vlan_cfg, HNS3_SHOW_TAG1_EN_B,
|
|
vcfg->vlan1_vlan_prionly ? 1 : 0);
|
|
hns3_set_bit(req->vport_vlan_cfg, HNS3_SHOW_TAG2_EN_B,
|
|
vcfg->vlan2_vlan_prionly ? 1 : 0);
|
|
|
|
/* firmwall will ignore this configuration for PCI_REVISION_ID_HIP08 */
|
|
hns3_set_bit(req->vport_vlan_cfg, HNS3_DISCARD_TAG1_EN_B,
|
|
vcfg->strip_tag1_discard_en ? 1 : 0);
|
|
hns3_set_bit(req->vport_vlan_cfg, HNS3_DISCARD_TAG2_EN_B,
|
|
vcfg->strip_tag2_discard_en ? 1 : 0);
|
|
/*
|
|
* In current version VF is not supported when PF is driven by DPDK
|
|
* driver, just need to configure parameters for PF vport.
|
|
*/
|
|
vport_id = HNS3_PF_FUNC_ID;
|
|
req->vf_offset = vport_id / HNS3_VF_NUM_PER_CMD;
|
|
bitmap = 1 << (vport_id % HNS3_VF_NUM_PER_BYTE);
|
|
req->vf_bitmap[req->vf_offset] = bitmap;
|
|
|
|
ret = hns3_cmd_send(hw, &desc, 1);
|
|
if (ret)
|
|
hns3_err(hw, "Send port rxvlan cfg command fail, ret =%d", ret);
|
|
return ret;
|
|
}
|
|
|
|
static void
|
|
hns3_update_rx_offload_cfg(struct hns3_adapter *hns,
|
|
struct hns3_rx_vtag_cfg *vcfg)
|
|
{
|
|
struct hns3_pf *pf = &hns->pf;
|
|
memcpy(&pf->vtag_config.rx_vcfg, vcfg, sizeof(pf->vtag_config.rx_vcfg));
|
|
}
|
|
|
|
static void
|
|
hns3_update_tx_offload_cfg(struct hns3_adapter *hns,
|
|
struct hns3_tx_vtag_cfg *vcfg)
|
|
{
|
|
struct hns3_pf *pf = &hns->pf;
|
|
memcpy(&pf->vtag_config.tx_vcfg, vcfg, sizeof(pf->vtag_config.tx_vcfg));
|
|
}
|
|
|
|
static int
|
|
hns3_en_hw_strip_rxvtag(struct hns3_adapter *hns, bool enable)
|
|
{
|
|
struct hns3_rx_vtag_cfg rxvlan_cfg;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int ret;
|
|
|
|
if (hw->port_base_vlan_cfg.state == HNS3_PORT_BASE_VLAN_DISABLE) {
|
|
rxvlan_cfg.strip_tag1_en = false;
|
|
rxvlan_cfg.strip_tag2_en = enable;
|
|
rxvlan_cfg.strip_tag2_discard_en = false;
|
|
} else {
|
|
rxvlan_cfg.strip_tag1_en = enable;
|
|
rxvlan_cfg.strip_tag2_en = true;
|
|
rxvlan_cfg.strip_tag2_discard_en = true;
|
|
}
|
|
|
|
rxvlan_cfg.strip_tag1_discard_en = false;
|
|
rxvlan_cfg.vlan1_vlan_prionly = false;
|
|
rxvlan_cfg.vlan2_vlan_prionly = false;
|
|
rxvlan_cfg.rx_vlan_offload_en = enable;
|
|
|
|
ret = hns3_set_vlan_rx_offload_cfg(hns, &rxvlan_cfg);
|
|
if (ret) {
|
|
hns3_err(hw, "%s strip rx vtag failed, ret = %d.",
|
|
enable ? "enable" : "disable", ret);
|
|
return ret;
|
|
}
|
|
|
|
hns3_update_rx_offload_cfg(hns, &rxvlan_cfg);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_set_vlan_filter_ctrl(struct hns3_hw *hw, uint8_t vlan_type,
|
|
uint8_t fe_type, bool filter_en, uint8_t vf_id)
|
|
{
|
|
struct hns3_vlan_filter_ctrl_cmd *req;
|
|
struct hns3_cmd_desc desc;
|
|
int ret;
|
|
|
|
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_VLAN_FILTER_CTRL, false);
|
|
|
|
req = (struct hns3_vlan_filter_ctrl_cmd *)desc.data;
|
|
req->vlan_type = vlan_type;
|
|
req->vlan_fe = filter_en ? fe_type : 0;
|
|
req->vf_id = vf_id;
|
|
|
|
ret = hns3_cmd_send(hw, &desc, 1);
|
|
if (ret)
|
|
hns3_err(hw, "set vlan filter fail, ret =%d", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_vlan_filter_init(struct hns3_adapter *hns)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int ret;
|
|
|
|
ret = hns3_set_vlan_filter_ctrl(hw, HNS3_FILTER_TYPE_VF,
|
|
HNS3_FILTER_FE_EGRESS, false,
|
|
HNS3_PF_FUNC_ID);
|
|
if (ret) {
|
|
hns3_err(hw, "failed to init vf vlan filter, ret = %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = hns3_set_vlan_filter_ctrl(hw, HNS3_FILTER_TYPE_PORT,
|
|
HNS3_FILTER_FE_INGRESS, false,
|
|
HNS3_PF_FUNC_ID);
|
|
if (ret)
|
|
hns3_err(hw, "failed to init port vlan filter, ret = %d", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_enable_vlan_filter(struct hns3_adapter *hns, bool enable)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int ret;
|
|
|
|
ret = hns3_set_vlan_filter_ctrl(hw, HNS3_FILTER_TYPE_PORT,
|
|
HNS3_FILTER_FE_INGRESS, enable,
|
|
HNS3_PF_FUNC_ID);
|
|
if (ret)
|
|
hns3_err(hw, "failed to %s port vlan filter, ret = %d",
|
|
enable ? "enable" : "disable", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_vlan_offload_set(struct rte_eth_dev *dev, int mask)
|
|
{
|
|
struct hns3_adapter *hns = dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
struct rte_eth_rxmode *rxmode;
|
|
unsigned int tmp_mask;
|
|
bool enable;
|
|
int ret = 0;
|
|
|
|
rte_spinlock_lock(&hw->lock);
|
|
rxmode = &dev->data->dev_conf.rxmode;
|
|
tmp_mask = (unsigned int)mask;
|
|
if (tmp_mask & ETH_VLAN_FILTER_MASK) {
|
|
/* ignore vlan filter configuration during promiscuous mode */
|
|
if (!dev->data->promiscuous) {
|
|
/* Enable or disable VLAN filter */
|
|
enable = rxmode->offloads & DEV_RX_OFFLOAD_VLAN_FILTER ?
|
|
true : false;
|
|
|
|
ret = hns3_enable_vlan_filter(hns, enable);
|
|
if (ret) {
|
|
rte_spinlock_unlock(&hw->lock);
|
|
hns3_err(hw, "failed to %s rx filter, ret = %d",
|
|
enable ? "enable" : "disable", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (tmp_mask & ETH_VLAN_STRIP_MASK) {
|
|
/* Enable or disable VLAN stripping */
|
|
enable = rxmode->offloads & DEV_RX_OFFLOAD_VLAN_STRIP ?
|
|
true : false;
|
|
|
|
ret = hns3_en_hw_strip_rxvtag(hns, enable);
|
|
if (ret) {
|
|
rte_spinlock_unlock(&hw->lock);
|
|
hns3_err(hw, "failed to %s rx strip, ret = %d",
|
|
enable ? "enable" : "disable", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
rte_spinlock_unlock(&hw->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_set_vlan_tx_offload_cfg(struct hns3_adapter *hns,
|
|
struct hns3_tx_vtag_cfg *vcfg)
|
|
{
|
|
struct hns3_vport_vtag_tx_cfg_cmd *req;
|
|
struct hns3_cmd_desc desc;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
uint16_t vport_id;
|
|
uint8_t bitmap;
|
|
int ret;
|
|
|
|
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_VLAN_PORT_TX_CFG, false);
|
|
|
|
req = (struct hns3_vport_vtag_tx_cfg_cmd *)desc.data;
|
|
req->def_vlan_tag1 = vcfg->default_tag1;
|
|
req->def_vlan_tag2 = vcfg->default_tag2;
|
|
hns3_set_bit(req->vport_vlan_cfg, HNS3_ACCEPT_TAG1_B,
|
|
vcfg->accept_tag1 ? 1 : 0);
|
|
hns3_set_bit(req->vport_vlan_cfg, HNS3_ACCEPT_UNTAG1_B,
|
|
vcfg->accept_untag1 ? 1 : 0);
|
|
hns3_set_bit(req->vport_vlan_cfg, HNS3_ACCEPT_TAG2_B,
|
|
vcfg->accept_tag2 ? 1 : 0);
|
|
hns3_set_bit(req->vport_vlan_cfg, HNS3_ACCEPT_UNTAG2_B,
|
|
vcfg->accept_untag2 ? 1 : 0);
|
|
hns3_set_bit(req->vport_vlan_cfg, HNS3_PORT_INS_TAG1_EN_B,
|
|
vcfg->insert_tag1_en ? 1 : 0);
|
|
hns3_set_bit(req->vport_vlan_cfg, HNS3_PORT_INS_TAG2_EN_B,
|
|
vcfg->insert_tag2_en ? 1 : 0);
|
|
hns3_set_bit(req->vport_vlan_cfg, HNS3_CFG_NIC_ROCE_SEL_B, 0);
|
|
|
|
/* firmwall will ignore this configuration for PCI_REVISION_ID_HIP08 */
|
|
hns3_set_bit(req->vport_vlan_cfg, HNS3_TAG_SHIFT_MODE_EN_B,
|
|
vcfg->tag_shift_mode_en ? 1 : 0);
|
|
|
|
/*
|
|
* In current version VF is not supported when PF is driven by DPDK
|
|
* driver, just need to configure parameters for PF vport.
|
|
*/
|
|
vport_id = HNS3_PF_FUNC_ID;
|
|
req->vf_offset = vport_id / HNS3_VF_NUM_PER_CMD;
|
|
bitmap = 1 << (vport_id % HNS3_VF_NUM_PER_BYTE);
|
|
req->vf_bitmap[req->vf_offset] = bitmap;
|
|
|
|
ret = hns3_cmd_send(hw, &desc, 1);
|
|
if (ret)
|
|
hns3_err(hw, "Send port txvlan cfg command fail, ret =%d", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_vlan_txvlan_cfg(struct hns3_adapter *hns, uint16_t port_base_vlan_state,
|
|
uint16_t pvid)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
struct hns3_tx_vtag_cfg txvlan_cfg;
|
|
int ret;
|
|
|
|
if (port_base_vlan_state == HNS3_PORT_BASE_VLAN_DISABLE) {
|
|
txvlan_cfg.accept_tag1 = true;
|
|
txvlan_cfg.insert_tag1_en = false;
|
|
txvlan_cfg.default_tag1 = 0;
|
|
} else {
|
|
txvlan_cfg.accept_tag1 =
|
|
hw->vlan_mode == HNS3_HW_SHIFT_AND_DISCARD_MODE;
|
|
txvlan_cfg.insert_tag1_en = true;
|
|
txvlan_cfg.default_tag1 = pvid;
|
|
}
|
|
|
|
txvlan_cfg.accept_untag1 = true;
|
|
txvlan_cfg.accept_tag2 = true;
|
|
txvlan_cfg.accept_untag2 = true;
|
|
txvlan_cfg.insert_tag2_en = false;
|
|
txvlan_cfg.default_tag2 = 0;
|
|
txvlan_cfg.tag_shift_mode_en = true;
|
|
|
|
ret = hns3_set_vlan_tx_offload_cfg(hns, &txvlan_cfg);
|
|
if (ret) {
|
|
hns3_err(hw, "pf vlan set pvid failed, pvid =%u ,ret =%d", pvid,
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
hns3_update_tx_offload_cfg(hns, &txvlan_cfg);
|
|
return ret;
|
|
}
|
|
|
|
|
|
static void
|
|
hns3_rm_all_vlan_table(struct hns3_adapter *hns, bool is_del_list)
|
|
{
|
|
struct hns3_user_vlan_table *vlan_entry;
|
|
struct hns3_pf *pf = &hns->pf;
|
|
|
|
LIST_FOREACH(vlan_entry, &pf->vlan_list, next) {
|
|
if (vlan_entry->hd_tbl_status) {
|
|
hns3_set_port_vlan_filter(hns, vlan_entry->vlan_id, 0);
|
|
vlan_entry->hd_tbl_status = false;
|
|
}
|
|
}
|
|
|
|
if (is_del_list) {
|
|
vlan_entry = LIST_FIRST(&pf->vlan_list);
|
|
while (vlan_entry) {
|
|
LIST_REMOVE(vlan_entry, next);
|
|
rte_free(vlan_entry);
|
|
vlan_entry = LIST_FIRST(&pf->vlan_list);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
hns3_add_all_vlan_table(struct hns3_adapter *hns)
|
|
{
|
|
struct hns3_user_vlan_table *vlan_entry;
|
|
struct hns3_pf *pf = &hns->pf;
|
|
|
|
LIST_FOREACH(vlan_entry, &pf->vlan_list, next) {
|
|
if (!vlan_entry->hd_tbl_status) {
|
|
hns3_set_port_vlan_filter(hns, vlan_entry->vlan_id, 1);
|
|
vlan_entry->hd_tbl_status = true;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
hns3_remove_all_vlan_table(struct hns3_adapter *hns)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int ret;
|
|
|
|
hns3_rm_all_vlan_table(hns, true);
|
|
if (hw->port_base_vlan_cfg.pvid != HNS3_INVALID_PVID) {
|
|
ret = hns3_set_port_vlan_filter(hns,
|
|
hw->port_base_vlan_cfg.pvid, 0);
|
|
if (ret) {
|
|
hns3_err(hw, "Failed to remove all vlan table, ret =%d",
|
|
ret);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int
|
|
hns3_update_vlan_filter_entries(struct hns3_adapter *hns,
|
|
uint16_t port_base_vlan_state, uint16_t new_pvid)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
uint16_t old_pvid;
|
|
int ret;
|
|
|
|
if (port_base_vlan_state == HNS3_PORT_BASE_VLAN_ENABLE) {
|
|
old_pvid = hw->port_base_vlan_cfg.pvid;
|
|
if (old_pvid != HNS3_INVALID_PVID) {
|
|
ret = hns3_set_port_vlan_filter(hns, old_pvid, 0);
|
|
if (ret) {
|
|
hns3_err(hw, "failed to remove old pvid %u, "
|
|
"ret = %d", old_pvid, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
hns3_rm_all_vlan_table(hns, false);
|
|
ret = hns3_set_port_vlan_filter(hns, new_pvid, 1);
|
|
if (ret) {
|
|
hns3_err(hw, "failed to add new pvid %u, ret = %d",
|
|
new_pvid, ret);
|
|
return ret;
|
|
}
|
|
} else {
|
|
ret = hns3_set_port_vlan_filter(hns, new_pvid, 0);
|
|
if (ret) {
|
|
hns3_err(hw, "failed to remove pvid %u, ret = %d",
|
|
new_pvid, ret);
|
|
return ret;
|
|
}
|
|
|
|
hns3_add_all_vlan_table(hns);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3_en_pvid_strip(struct hns3_adapter *hns, int on)
|
|
{
|
|
struct hns3_rx_vtag_cfg *old_cfg = &hns->pf.vtag_config.rx_vcfg;
|
|
struct hns3_rx_vtag_cfg rx_vlan_cfg;
|
|
bool rx_strip_en;
|
|
int ret;
|
|
|
|
rx_strip_en = old_cfg->rx_vlan_offload_en;
|
|
if (on) {
|
|
rx_vlan_cfg.strip_tag1_en = rx_strip_en;
|
|
rx_vlan_cfg.strip_tag2_en = true;
|
|
rx_vlan_cfg.strip_tag2_discard_en = true;
|
|
} else {
|
|
rx_vlan_cfg.strip_tag1_en = false;
|
|
rx_vlan_cfg.strip_tag2_en = rx_strip_en;
|
|
rx_vlan_cfg.strip_tag2_discard_en = false;
|
|
}
|
|
rx_vlan_cfg.strip_tag1_discard_en = false;
|
|
rx_vlan_cfg.vlan1_vlan_prionly = false;
|
|
rx_vlan_cfg.vlan2_vlan_prionly = false;
|
|
rx_vlan_cfg.rx_vlan_offload_en = old_cfg->rx_vlan_offload_en;
|
|
|
|
ret = hns3_set_vlan_rx_offload_cfg(hns, &rx_vlan_cfg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
hns3_update_rx_offload_cfg(hns, &rx_vlan_cfg);
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_vlan_pvid_configure(struct hns3_adapter *hns, uint16_t pvid, int on)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
uint16_t port_base_vlan_state;
|
|
int ret, err;
|
|
|
|
if (on == 0 && pvid != hw->port_base_vlan_cfg.pvid) {
|
|
if (hw->port_base_vlan_cfg.pvid != HNS3_INVALID_PVID)
|
|
hns3_warn(hw, "Invalid operation! As current pvid set "
|
|
"is %u, disable pvid %u is invalid",
|
|
hw->port_base_vlan_cfg.pvid, pvid);
|
|
return 0;
|
|
}
|
|
|
|
port_base_vlan_state = on ? HNS3_PORT_BASE_VLAN_ENABLE :
|
|
HNS3_PORT_BASE_VLAN_DISABLE;
|
|
ret = hns3_vlan_txvlan_cfg(hns, port_base_vlan_state, pvid);
|
|
if (ret) {
|
|
hns3_err(hw, "failed to config tx vlan for pvid, ret = %d",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = hns3_en_pvid_strip(hns, on);
|
|
if (ret) {
|
|
hns3_err(hw, "failed to config rx vlan strip for pvid, "
|
|
"ret = %d", ret);
|
|
goto pvid_vlan_strip_fail;
|
|
}
|
|
|
|
if (pvid == HNS3_INVALID_PVID)
|
|
goto out;
|
|
ret = hns3_update_vlan_filter_entries(hns, port_base_vlan_state, pvid);
|
|
if (ret) {
|
|
hns3_err(hw, "failed to update vlan filter entries, ret = %d",
|
|
ret);
|
|
goto vlan_filter_set_fail;
|
|
}
|
|
|
|
out:
|
|
hw->port_base_vlan_cfg.state = port_base_vlan_state;
|
|
hw->port_base_vlan_cfg.pvid = on ? pvid : HNS3_INVALID_PVID;
|
|
return ret;
|
|
|
|
vlan_filter_set_fail:
|
|
err = hns3_en_pvid_strip(hns, hw->port_base_vlan_cfg.state ==
|
|
HNS3_PORT_BASE_VLAN_ENABLE);
|
|
if (err)
|
|
hns3_err(hw, "fail to rollback pvid strip, ret = %d", err);
|
|
|
|
pvid_vlan_strip_fail:
|
|
err = hns3_vlan_txvlan_cfg(hns, hw->port_base_vlan_cfg.state,
|
|
hw->port_base_vlan_cfg.pvid);
|
|
if (err)
|
|
hns3_err(hw, "fail to rollback txvlan status, ret = %d", err);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_vlan_pvid_set(struct rte_eth_dev *dev, uint16_t pvid, int on)
|
|
{
|
|
struct hns3_adapter *hns = dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
bool pvid_en_state_change;
|
|
uint16_t pvid_state;
|
|
int ret;
|
|
|
|
if (pvid > RTE_ETHER_MAX_VLAN_ID) {
|
|
hns3_err(hw, "Invalid vlan_id = %u > %d", pvid,
|
|
RTE_ETHER_MAX_VLAN_ID);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* If PVID configuration state change, should refresh the PVID
|
|
* configuration state in struct hns3_tx_queue/hns3_rx_queue.
|
|
*/
|
|
pvid_state = hw->port_base_vlan_cfg.state;
|
|
if ((on && pvid_state == HNS3_PORT_BASE_VLAN_ENABLE) ||
|
|
(!on && pvid_state == HNS3_PORT_BASE_VLAN_DISABLE))
|
|
pvid_en_state_change = false;
|
|
else
|
|
pvid_en_state_change = true;
|
|
|
|
rte_spinlock_lock(&hw->lock);
|
|
ret = hns3_vlan_pvid_configure(hns, pvid, on);
|
|
rte_spinlock_unlock(&hw->lock);
|
|
if (ret)
|
|
return ret;
|
|
/*
|
|
* Only in HNS3_SW_SHIFT_AND_MODE the PVID related operation in Tx/Rx
|
|
* need be processed by PMD driver.
|
|
*/
|
|
if (pvid_en_state_change &&
|
|
hw->vlan_mode == HNS3_SW_SHIFT_AND_DISCARD_MODE)
|
|
hns3_update_all_queues_pvid_proc_en(hw);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3_default_vlan_config(struct hns3_adapter *hns)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int ret;
|
|
|
|
/*
|
|
* When vlan filter is enabled, hardware regards packets without vlan
|
|
* as packets with vlan 0. Therefore, if vlan 0 is not in the vlan
|
|
* table, packets without vlan won't be received. So, add vlan 0 as
|
|
* the default vlan.
|
|
*/
|
|
ret = hns3_vlan_filter_configure(hns, 0, 1);
|
|
if (ret)
|
|
hns3_err(hw, "default vlan 0 config failed, ret =%d", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_init_vlan_config(struct hns3_adapter *hns)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int ret;
|
|
|
|
/*
|
|
* This function can be called in the initialization and reset process,
|
|
* when in reset process, it means that hardware had been reseted
|
|
* successfully and we need to restore the hardware configuration to
|
|
* ensure that the hardware configuration remains unchanged before and
|
|
* after reset.
|
|
*/
|
|
if (__atomic_load_n(&hw->reset.resetting, __ATOMIC_RELAXED) == 0) {
|
|
hw->port_base_vlan_cfg.state = HNS3_PORT_BASE_VLAN_DISABLE;
|
|
hw->port_base_vlan_cfg.pvid = HNS3_INVALID_PVID;
|
|
}
|
|
|
|
ret = hns3_vlan_filter_init(hns);
|
|
if (ret) {
|
|
hns3_err(hw, "vlan init fail in pf, ret =%d", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = hns3_vlan_tpid_configure(hns, ETH_VLAN_TYPE_INNER,
|
|
RTE_ETHER_TYPE_VLAN);
|
|
if (ret) {
|
|
hns3_err(hw, "tpid set fail in pf, ret =%d", ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* When in the reinit dev stage of the reset process, the following
|
|
* vlan-related configurations may differ from those at initialization,
|
|
* we will restore configurations to hardware in hns3_restore_vlan_table
|
|
* and hns3_restore_vlan_conf later.
|
|
*/
|
|
if (__atomic_load_n(&hw->reset.resetting, __ATOMIC_RELAXED) == 0) {
|
|
ret = hns3_vlan_pvid_configure(hns, HNS3_INVALID_PVID, 0);
|
|
if (ret) {
|
|
hns3_err(hw, "pvid set fail in pf, ret =%d", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = hns3_en_hw_strip_rxvtag(hns, false);
|
|
if (ret) {
|
|
hns3_err(hw, "rx strip configure fail in pf, ret =%d",
|
|
ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return hns3_default_vlan_config(hns);
|
|
}
|
|
|
|
static int
|
|
hns3_restore_vlan_conf(struct hns3_adapter *hns)
|
|
{
|
|
struct hns3_pf *pf = &hns->pf;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
uint64_t offloads;
|
|
bool enable;
|
|
int ret;
|
|
|
|
if (!hw->data->promiscuous) {
|
|
/* restore vlan filter states */
|
|
offloads = hw->data->dev_conf.rxmode.offloads;
|
|
enable = offloads & DEV_RX_OFFLOAD_VLAN_FILTER ? true : false;
|
|
ret = hns3_enable_vlan_filter(hns, enable);
|
|
if (ret) {
|
|
hns3_err(hw, "failed to restore vlan rx filter conf, "
|
|
"ret = %d", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
ret = hns3_set_vlan_rx_offload_cfg(hns, &pf->vtag_config.rx_vcfg);
|
|
if (ret) {
|
|
hns3_err(hw, "failed to restore vlan rx conf, ret = %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = hns3_set_vlan_tx_offload_cfg(hns, &pf->vtag_config.tx_vcfg);
|
|
if (ret)
|
|
hns3_err(hw, "failed to restore vlan tx conf, ret = %d", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_dev_configure_vlan(struct rte_eth_dev *dev)
|
|
{
|
|
struct hns3_adapter *hns = dev->data->dev_private;
|
|
struct rte_eth_dev_data *data = dev->data;
|
|
struct rte_eth_txmode *txmode;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int mask;
|
|
int ret;
|
|
|
|
txmode = &data->dev_conf.txmode;
|
|
if (txmode->hw_vlan_reject_tagged || txmode->hw_vlan_reject_untagged)
|
|
hns3_warn(hw,
|
|
"hw_vlan_reject_tagged or hw_vlan_reject_untagged "
|
|
"configuration is not supported! Ignore these two "
|
|
"parameters: hw_vlan_reject_tagged(%u), "
|
|
"hw_vlan_reject_untagged(%u)",
|
|
txmode->hw_vlan_reject_tagged,
|
|
txmode->hw_vlan_reject_untagged);
|
|
|
|
/* Apply vlan offload setting */
|
|
mask = ETH_VLAN_STRIP_MASK | ETH_VLAN_FILTER_MASK;
|
|
ret = hns3_vlan_offload_set(dev, mask);
|
|
if (ret) {
|
|
hns3_err(hw, "dev config rx vlan offload failed, ret = %d",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* If pvid config is not set in rte_eth_conf, driver needn't to set
|
|
* VLAN pvid related configuration to hardware.
|
|
*/
|
|
if (txmode->pvid == 0 && txmode->hw_vlan_insert_pvid == 0)
|
|
return 0;
|
|
|
|
/* Apply pvid setting */
|
|
ret = hns3_vlan_pvid_set(dev, txmode->pvid,
|
|
txmode->hw_vlan_insert_pvid);
|
|
if (ret)
|
|
hns3_err(hw, "dev config vlan pvid(%u) failed, ret = %d",
|
|
txmode->pvid, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_config_tso(struct hns3_hw *hw, unsigned int tso_mss_min,
|
|
unsigned int tso_mss_max)
|
|
{
|
|
struct hns3_cfg_tso_status_cmd *req;
|
|
struct hns3_cmd_desc desc;
|
|
uint16_t tso_mss;
|
|
|
|
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_TSO_GENERIC_CONFIG, false);
|
|
|
|
req = (struct hns3_cfg_tso_status_cmd *)desc.data;
|
|
|
|
tso_mss = 0;
|
|
hns3_set_field(tso_mss, HNS3_TSO_MSS_MIN_M, HNS3_TSO_MSS_MIN_S,
|
|
tso_mss_min);
|
|
req->tso_mss_min = rte_cpu_to_le_16(tso_mss);
|
|
|
|
tso_mss = 0;
|
|
hns3_set_field(tso_mss, HNS3_TSO_MSS_MIN_M, HNS3_TSO_MSS_MIN_S,
|
|
tso_mss_max);
|
|
req->tso_mss_max = rte_cpu_to_le_16(tso_mss);
|
|
|
|
return hns3_cmd_send(hw, &desc, 1);
|
|
}
|
|
|
|
static int
|
|
hns3_set_umv_space(struct hns3_hw *hw, uint16_t space_size,
|
|
uint16_t *allocated_size, bool is_alloc)
|
|
{
|
|
struct hns3_umv_spc_alc_cmd *req;
|
|
struct hns3_cmd_desc desc;
|
|
int ret;
|
|
|
|
req = (struct hns3_umv_spc_alc_cmd *)desc.data;
|
|
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_MAC_VLAN_ALLOCATE, false);
|
|
hns3_set_bit(req->allocate, HNS3_UMV_SPC_ALC_B, is_alloc ? 0 : 1);
|
|
req->space_size = rte_cpu_to_le_32(space_size);
|
|
|
|
ret = hns3_cmd_send(hw, &desc, 1);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "%s umv space failed for cmd_send, ret =%d",
|
|
is_alloc ? "allocate" : "free", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (is_alloc && allocated_size)
|
|
*allocated_size = rte_le_to_cpu_32(desc.data[1]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3_init_umv_space(struct hns3_hw *hw)
|
|
{
|
|
struct hns3_adapter *hns = HNS3_DEV_HW_TO_ADAPTER(hw);
|
|
struct hns3_pf *pf = &hns->pf;
|
|
uint16_t allocated_size = 0;
|
|
int ret;
|
|
|
|
ret = hns3_set_umv_space(hw, pf->wanted_umv_size, &allocated_size,
|
|
true);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (allocated_size < pf->wanted_umv_size)
|
|
PMD_INIT_LOG(WARNING, "Alloc umv space failed, want %u, get %u",
|
|
pf->wanted_umv_size, allocated_size);
|
|
|
|
pf->max_umv_size = (!!allocated_size) ? allocated_size :
|
|
pf->wanted_umv_size;
|
|
pf->used_umv_size = 0;
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3_uninit_umv_space(struct hns3_hw *hw)
|
|
{
|
|
struct hns3_adapter *hns = HNS3_DEV_HW_TO_ADAPTER(hw);
|
|
struct hns3_pf *pf = &hns->pf;
|
|
int ret;
|
|
|
|
if (pf->max_umv_size == 0)
|
|
return 0;
|
|
|
|
ret = hns3_set_umv_space(hw, pf->max_umv_size, NULL, false);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pf->max_umv_size = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool
|
|
hns3_is_umv_space_full(struct hns3_hw *hw)
|
|
{
|
|
struct hns3_adapter *hns = HNS3_DEV_HW_TO_ADAPTER(hw);
|
|
struct hns3_pf *pf = &hns->pf;
|
|
bool is_full;
|
|
|
|
is_full = (pf->used_umv_size >= pf->max_umv_size);
|
|
|
|
return is_full;
|
|
}
|
|
|
|
static void
|
|
hns3_update_umv_space(struct hns3_hw *hw, bool is_free)
|
|
{
|
|
struct hns3_adapter *hns = HNS3_DEV_HW_TO_ADAPTER(hw);
|
|
struct hns3_pf *pf = &hns->pf;
|
|
|
|
if (is_free) {
|
|
if (pf->used_umv_size > 0)
|
|
pf->used_umv_size--;
|
|
} else
|
|
pf->used_umv_size++;
|
|
}
|
|
|
|
static void
|
|
hns3_prepare_mac_addr(struct hns3_mac_vlan_tbl_entry_cmd *new_req,
|
|
const uint8_t *addr, bool is_mc)
|
|
{
|
|
const unsigned char *mac_addr = addr;
|
|
uint32_t high_val = ((uint32_t)mac_addr[3] << 24) |
|
|
((uint32_t)mac_addr[2] << 16) |
|
|
((uint32_t)mac_addr[1] << 8) |
|
|
(uint32_t)mac_addr[0];
|
|
uint32_t low_val = ((uint32_t)mac_addr[5] << 8) | (uint32_t)mac_addr[4];
|
|
|
|
hns3_set_bit(new_req->flags, HNS3_MAC_VLAN_BIT0_EN_B, 1);
|
|
if (is_mc) {
|
|
hns3_set_bit(new_req->entry_type, HNS3_MAC_VLAN_BIT0_EN_B, 0);
|
|
hns3_set_bit(new_req->entry_type, HNS3_MAC_VLAN_BIT1_EN_B, 1);
|
|
hns3_set_bit(new_req->mc_mac_en, HNS3_MAC_VLAN_BIT0_EN_B, 1);
|
|
}
|
|
|
|
new_req->mac_addr_hi32 = rte_cpu_to_le_32(high_val);
|
|
new_req->mac_addr_lo16 = rte_cpu_to_le_16(low_val & 0xffff);
|
|
}
|
|
|
|
static int
|
|
hns3_get_mac_vlan_cmd_status(struct hns3_hw *hw, uint16_t cmdq_resp,
|
|
uint8_t resp_code,
|
|
enum hns3_mac_vlan_tbl_opcode op)
|
|
{
|
|
if (cmdq_resp) {
|
|
hns3_err(hw, "cmdq execute failed for get_mac_vlan_cmd_status,status=%u",
|
|
cmdq_resp);
|
|
return -EIO;
|
|
}
|
|
|
|
if (op == HNS3_MAC_VLAN_ADD) {
|
|
if (resp_code == 0 || resp_code == 1) {
|
|
return 0;
|
|
} else if (resp_code == HNS3_ADD_UC_OVERFLOW) {
|
|
hns3_err(hw, "add mac addr failed for uc_overflow");
|
|
return -ENOSPC;
|
|
} else if (resp_code == HNS3_ADD_MC_OVERFLOW) {
|
|
hns3_err(hw, "add mac addr failed for mc_overflow");
|
|
return -ENOSPC;
|
|
}
|
|
|
|
hns3_err(hw, "add mac addr failed for undefined, code=%u",
|
|
resp_code);
|
|
return -EIO;
|
|
} else if (op == HNS3_MAC_VLAN_REMOVE) {
|
|
if (resp_code == 0) {
|
|
return 0;
|
|
} else if (resp_code == 1) {
|
|
hns3_dbg(hw, "remove mac addr failed for miss");
|
|
return -ENOENT;
|
|
}
|
|
|
|
hns3_err(hw, "remove mac addr failed for undefined, code=%u",
|
|
resp_code);
|
|
return -EIO;
|
|
} else if (op == HNS3_MAC_VLAN_LKUP) {
|
|
if (resp_code == 0) {
|
|
return 0;
|
|
} else if (resp_code == 1) {
|
|
hns3_dbg(hw, "lookup mac addr failed for miss");
|
|
return -ENOENT;
|
|
}
|
|
|
|
hns3_err(hw, "lookup mac addr failed for undefined, code=%u",
|
|
resp_code);
|
|
return -EIO;
|
|
}
|
|
|
|
hns3_err(hw, "unknown opcode for get_mac_vlan_cmd_status, opcode=%u",
|
|
op);
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int
|
|
hns3_lookup_mac_vlan_tbl(struct hns3_hw *hw,
|
|
struct hns3_mac_vlan_tbl_entry_cmd *req,
|
|
struct hns3_cmd_desc *desc, bool is_mc)
|
|
{
|
|
uint8_t resp_code;
|
|
uint16_t retval;
|
|
int ret;
|
|
|
|
hns3_cmd_setup_basic_desc(&desc[0], HNS3_OPC_MAC_VLAN_ADD, true);
|
|
if (is_mc) {
|
|
desc[0].flag |= rte_cpu_to_le_16(HNS3_CMD_FLAG_NEXT);
|
|
memcpy(desc[0].data, req,
|
|
sizeof(struct hns3_mac_vlan_tbl_entry_cmd));
|
|
hns3_cmd_setup_basic_desc(&desc[1], HNS3_OPC_MAC_VLAN_ADD,
|
|
true);
|
|
desc[1].flag |= rte_cpu_to_le_16(HNS3_CMD_FLAG_NEXT);
|
|
hns3_cmd_setup_basic_desc(&desc[2], HNS3_OPC_MAC_VLAN_ADD,
|
|
true);
|
|
ret = hns3_cmd_send(hw, desc, HNS3_MC_MAC_VLAN_ADD_DESC_NUM);
|
|
} else {
|
|
memcpy(desc[0].data, req,
|
|
sizeof(struct hns3_mac_vlan_tbl_entry_cmd));
|
|
ret = hns3_cmd_send(hw, desc, 1);
|
|
}
|
|
if (ret) {
|
|
hns3_err(hw, "lookup mac addr failed for cmd_send, ret =%d.",
|
|
ret);
|
|
return ret;
|
|
}
|
|
resp_code = (rte_le_to_cpu_32(desc[0].data[0]) >> 8) & 0xff;
|
|
retval = rte_le_to_cpu_16(desc[0].retval);
|
|
|
|
return hns3_get_mac_vlan_cmd_status(hw, retval, resp_code,
|
|
HNS3_MAC_VLAN_LKUP);
|
|
}
|
|
|
|
static int
|
|
hns3_add_mac_vlan_tbl(struct hns3_hw *hw,
|
|
struct hns3_mac_vlan_tbl_entry_cmd *req,
|
|
struct hns3_cmd_desc *mc_desc)
|
|
{
|
|
uint8_t resp_code;
|
|
uint16_t retval;
|
|
int cfg_status;
|
|
int ret;
|
|
|
|
if (mc_desc == NULL) {
|
|
struct hns3_cmd_desc desc;
|
|
|
|
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_MAC_VLAN_ADD, false);
|
|
memcpy(desc.data, req,
|
|
sizeof(struct hns3_mac_vlan_tbl_entry_cmd));
|
|
ret = hns3_cmd_send(hw, &desc, 1);
|
|
resp_code = (rte_le_to_cpu_32(desc.data[0]) >> 8) & 0xff;
|
|
retval = rte_le_to_cpu_16(desc.retval);
|
|
|
|
cfg_status = hns3_get_mac_vlan_cmd_status(hw, retval, resp_code,
|
|
HNS3_MAC_VLAN_ADD);
|
|
} else {
|
|
hns3_cmd_reuse_desc(&mc_desc[0], false);
|
|
mc_desc[0].flag |= rte_cpu_to_le_16(HNS3_CMD_FLAG_NEXT);
|
|
hns3_cmd_reuse_desc(&mc_desc[1], false);
|
|
mc_desc[1].flag |= rte_cpu_to_le_16(HNS3_CMD_FLAG_NEXT);
|
|
hns3_cmd_reuse_desc(&mc_desc[2], false);
|
|
mc_desc[2].flag &= rte_cpu_to_le_16(~HNS3_CMD_FLAG_NEXT);
|
|
memcpy(mc_desc[0].data, req,
|
|
sizeof(struct hns3_mac_vlan_tbl_entry_cmd));
|
|
mc_desc[0].retval = 0;
|
|
ret = hns3_cmd_send(hw, mc_desc, HNS3_MC_MAC_VLAN_ADD_DESC_NUM);
|
|
resp_code = (rte_le_to_cpu_32(mc_desc[0].data[0]) >> 8) & 0xff;
|
|
retval = rte_le_to_cpu_16(mc_desc[0].retval);
|
|
|
|
cfg_status = hns3_get_mac_vlan_cmd_status(hw, retval, resp_code,
|
|
HNS3_MAC_VLAN_ADD);
|
|
}
|
|
|
|
if (ret) {
|
|
hns3_err(hw, "add mac addr failed for cmd_send, ret =%d", ret);
|
|
return ret;
|
|
}
|
|
|
|
return cfg_status;
|
|
}
|
|
|
|
static int
|
|
hns3_remove_mac_vlan_tbl(struct hns3_hw *hw,
|
|
struct hns3_mac_vlan_tbl_entry_cmd *req)
|
|
{
|
|
struct hns3_cmd_desc desc;
|
|
uint8_t resp_code;
|
|
uint16_t retval;
|
|
int ret;
|
|
|
|
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_MAC_VLAN_REMOVE, false);
|
|
|
|
memcpy(desc.data, req, sizeof(struct hns3_mac_vlan_tbl_entry_cmd));
|
|
|
|
ret = hns3_cmd_send(hw, &desc, 1);
|
|
if (ret) {
|
|
hns3_err(hw, "del mac addr failed for cmd_send, ret =%d", ret);
|
|
return ret;
|
|
}
|
|
resp_code = (rte_le_to_cpu_32(desc.data[0]) >> 8) & 0xff;
|
|
retval = rte_le_to_cpu_16(desc.retval);
|
|
|
|
return hns3_get_mac_vlan_cmd_status(hw, retval, resp_code,
|
|
HNS3_MAC_VLAN_REMOVE);
|
|
}
|
|
|
|
static int
|
|
hns3_add_uc_addr_common(struct hns3_hw *hw, struct rte_ether_addr *mac_addr)
|
|
{
|
|
struct hns3_adapter *hns = HNS3_DEV_HW_TO_ADAPTER(hw);
|
|
struct hns3_mac_vlan_tbl_entry_cmd req;
|
|
struct hns3_pf *pf = &hns->pf;
|
|
struct hns3_cmd_desc desc[3];
|
|
char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
|
|
uint16_t egress_port = 0;
|
|
uint8_t vf_id;
|
|
int ret;
|
|
|
|
/* check if mac addr is valid */
|
|
if (!rte_is_valid_assigned_ether_addr(mac_addr)) {
|
|
hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
|
|
mac_addr);
|
|
hns3_err(hw, "Add unicast mac addr err! addr(%s) invalid",
|
|
mac_str);
|
|
return -EINVAL;
|
|
}
|
|
|
|
memset(&req, 0, sizeof(req));
|
|
|
|
/*
|
|
* In current version VF is not supported when PF is driven by DPDK
|
|
* driver, just need to configure parameters for PF vport.
|
|
*/
|
|
vf_id = HNS3_PF_FUNC_ID;
|
|
hns3_set_field(egress_port, HNS3_MAC_EPORT_VFID_M,
|
|
HNS3_MAC_EPORT_VFID_S, vf_id);
|
|
|
|
req.egress_port = rte_cpu_to_le_16(egress_port);
|
|
|
|
hns3_prepare_mac_addr(&req, mac_addr->addr_bytes, false);
|
|
|
|
/*
|
|
* Lookup the mac address in the mac_vlan table, and add
|
|
* it if the entry is inexistent. Repeated unicast entry
|
|
* is not allowed in the mac vlan table.
|
|
*/
|
|
ret = hns3_lookup_mac_vlan_tbl(hw, &req, desc, false);
|
|
if (ret == -ENOENT) {
|
|
if (!hns3_is_umv_space_full(hw)) {
|
|
ret = hns3_add_mac_vlan_tbl(hw, &req, NULL);
|
|
if (!ret)
|
|
hns3_update_umv_space(hw, false);
|
|
return ret;
|
|
}
|
|
|
|
hns3_err(hw, "UC MAC table full(%u)", pf->used_umv_size);
|
|
|
|
return -ENOSPC;
|
|
}
|
|
|
|
hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE, mac_addr);
|
|
|
|
/* check if we just hit the duplicate */
|
|
if (ret == 0) {
|
|
hns3_dbg(hw, "mac addr(%s) has been in the MAC table", mac_str);
|
|
return 0;
|
|
}
|
|
|
|
hns3_err(hw, "PF failed to add unicast entry(%s) in the MAC table",
|
|
mac_str);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_add_mc_addr_common(struct hns3_hw *hw, struct rte_ether_addr *mac_addr)
|
|
{
|
|
char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
|
|
struct rte_ether_addr *addr;
|
|
int ret;
|
|
int i;
|
|
|
|
for (i = 0; i < hw->mc_addrs_num; i++) {
|
|
addr = &hw->mc_addrs[i];
|
|
/* Check if there are duplicate addresses */
|
|
if (rte_is_same_ether_addr(addr, mac_addr)) {
|
|
hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
|
|
addr);
|
|
hns3_err(hw, "failed to add mc mac addr, same addrs"
|
|
"(%s) is added by the set_mc_mac_addr_list "
|
|
"API", mac_str);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
ret = hns3_add_mc_addr(hw, mac_addr);
|
|
if (ret) {
|
|
hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
|
|
mac_addr);
|
|
hns3_err(hw, "failed to add mc mac addr(%s), ret = %d",
|
|
mac_str, ret);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_remove_mc_addr_common(struct hns3_hw *hw, struct rte_ether_addr *mac_addr)
|
|
{
|
|
char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
|
|
int ret;
|
|
|
|
ret = hns3_remove_mc_addr(hw, mac_addr);
|
|
if (ret) {
|
|
hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
|
|
mac_addr);
|
|
hns3_err(hw, "failed to remove mc mac addr(%s), ret = %d",
|
|
mac_str, ret);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_add_mac_addr(struct rte_eth_dev *dev, struct rte_ether_addr *mac_addr,
|
|
uint32_t idx, __rte_unused uint32_t pool)
|
|
{
|
|
struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
|
|
char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
|
|
int ret;
|
|
|
|
rte_spinlock_lock(&hw->lock);
|
|
|
|
/*
|
|
* In hns3 network engine adding UC and MC mac address with different
|
|
* commands with firmware. We need to determine whether the input
|
|
* address is a UC or a MC address to call different commands.
|
|
* By the way, it is recommended calling the API function named
|
|
* rte_eth_dev_set_mc_addr_list to set the MC mac address, because
|
|
* using the rte_eth_dev_mac_addr_add API function to set MC mac address
|
|
* may affect the specifications of UC mac addresses.
|
|
*/
|
|
if (rte_is_multicast_ether_addr(mac_addr))
|
|
ret = hns3_add_mc_addr_common(hw, mac_addr);
|
|
else
|
|
ret = hns3_add_uc_addr_common(hw, mac_addr);
|
|
|
|
if (ret) {
|
|
rte_spinlock_unlock(&hw->lock);
|
|
hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
|
|
mac_addr);
|
|
hns3_err(hw, "failed to add mac addr(%s), ret = %d", mac_str,
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
if (idx == 0)
|
|
hw->mac.default_addr_setted = true;
|
|
rte_spinlock_unlock(&hw->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_remove_uc_addr_common(struct hns3_hw *hw, struct rte_ether_addr *mac_addr)
|
|
{
|
|
struct hns3_mac_vlan_tbl_entry_cmd req;
|
|
char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
|
|
int ret;
|
|
|
|
/* check if mac addr is valid */
|
|
if (!rte_is_valid_assigned_ether_addr(mac_addr)) {
|
|
hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
|
|
mac_addr);
|
|
hns3_err(hw, "remove unicast mac addr err! addr(%s) invalid",
|
|
mac_str);
|
|
return -EINVAL;
|
|
}
|
|
|
|
memset(&req, 0, sizeof(req));
|
|
hns3_set_bit(req.entry_type, HNS3_MAC_VLAN_BIT0_EN_B, 0);
|
|
hns3_prepare_mac_addr(&req, mac_addr->addr_bytes, false);
|
|
ret = hns3_remove_mac_vlan_tbl(hw, &req);
|
|
if (ret == -ENOENT) /* mac addr isn't existent in the mac vlan table. */
|
|
return 0;
|
|
else if (ret == 0)
|
|
hns3_update_umv_space(hw, true);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void
|
|
hns3_remove_mac_addr(struct rte_eth_dev *dev, uint32_t idx)
|
|
{
|
|
struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
|
|
/* index will be checked by upper level rte interface */
|
|
struct rte_ether_addr *mac_addr = &dev->data->mac_addrs[idx];
|
|
char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
|
|
int ret;
|
|
|
|
rte_spinlock_lock(&hw->lock);
|
|
|
|
if (rte_is_multicast_ether_addr(mac_addr))
|
|
ret = hns3_remove_mc_addr_common(hw, mac_addr);
|
|
else
|
|
ret = hns3_remove_uc_addr_common(hw, mac_addr);
|
|
rte_spinlock_unlock(&hw->lock);
|
|
if (ret) {
|
|
hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
|
|
mac_addr);
|
|
hns3_err(hw, "failed to remove mac addr(%s), ret = %d", mac_str,
|
|
ret);
|
|
}
|
|
}
|
|
|
|
static int
|
|
hns3_set_default_mac_addr(struct rte_eth_dev *dev,
|
|
struct rte_ether_addr *mac_addr)
|
|
{
|
|
struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
|
|
struct rte_ether_addr *oaddr;
|
|
char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
|
|
bool default_addr_setted;
|
|
bool rm_succes = false;
|
|
int ret, ret_val;
|
|
|
|
/*
|
|
* It has been guaranteed that input parameter named mac_addr is valid
|
|
* address in the rte layer of DPDK framework.
|
|
*/
|
|
oaddr = (struct rte_ether_addr *)hw->mac.mac_addr;
|
|
default_addr_setted = hw->mac.default_addr_setted;
|
|
if (default_addr_setted && !!rte_is_same_ether_addr(mac_addr, oaddr))
|
|
return 0;
|
|
|
|
rte_spinlock_lock(&hw->lock);
|
|
if (default_addr_setted) {
|
|
ret = hns3_remove_uc_addr_common(hw, oaddr);
|
|
if (ret) {
|
|
hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
|
|
oaddr);
|
|
hns3_warn(hw, "Remove old uc mac address(%s) fail: %d",
|
|
mac_str, ret);
|
|
rm_succes = false;
|
|
} else
|
|
rm_succes = true;
|
|
}
|
|
|
|
ret = hns3_add_uc_addr_common(hw, mac_addr);
|
|
if (ret) {
|
|
hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
|
|
mac_addr);
|
|
hns3_err(hw, "Failed to set mac addr(%s): %d", mac_str, ret);
|
|
goto err_add_uc_addr;
|
|
}
|
|
|
|
ret = hns3_pause_addr_cfg(hw, mac_addr->addr_bytes);
|
|
if (ret) {
|
|
hns3_err(hw, "Failed to configure mac pause address: %d", ret);
|
|
goto err_pause_addr_cfg;
|
|
}
|
|
|
|
rte_ether_addr_copy(mac_addr,
|
|
(struct rte_ether_addr *)hw->mac.mac_addr);
|
|
hw->mac.default_addr_setted = true;
|
|
rte_spinlock_unlock(&hw->lock);
|
|
|
|
return 0;
|
|
|
|
err_pause_addr_cfg:
|
|
ret_val = hns3_remove_uc_addr_common(hw, mac_addr);
|
|
if (ret_val) {
|
|
hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
|
|
mac_addr);
|
|
hns3_warn(hw,
|
|
"Failed to roll back to del setted mac addr(%s): %d",
|
|
mac_str, ret_val);
|
|
}
|
|
|
|
err_add_uc_addr:
|
|
if (rm_succes) {
|
|
ret_val = hns3_add_uc_addr_common(hw, oaddr);
|
|
if (ret_val) {
|
|
hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
|
|
oaddr);
|
|
hns3_warn(hw,
|
|
"Failed to restore old uc mac addr(%s): %d",
|
|
mac_str, ret_val);
|
|
hw->mac.default_addr_setted = false;
|
|
}
|
|
}
|
|
rte_spinlock_unlock(&hw->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_configure_all_mac_addr(struct hns3_adapter *hns, bool del)
|
|
{
|
|
char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
|
|
struct hns3_hw *hw = &hns->hw;
|
|
struct rte_ether_addr *addr;
|
|
int err = 0;
|
|
int ret;
|
|
int i;
|
|
|
|
for (i = 0; i < HNS3_UC_MACADDR_NUM; i++) {
|
|
addr = &hw->data->mac_addrs[i];
|
|
if (rte_is_zero_ether_addr(addr))
|
|
continue;
|
|
if (rte_is_multicast_ether_addr(addr))
|
|
ret = del ? hns3_remove_mc_addr(hw, addr) :
|
|
hns3_add_mc_addr(hw, addr);
|
|
else
|
|
ret = del ? hns3_remove_uc_addr_common(hw, addr) :
|
|
hns3_add_uc_addr_common(hw, addr);
|
|
|
|
if (ret) {
|
|
err = ret;
|
|
hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
|
|
addr);
|
|
hns3_err(hw, "failed to %s mac addr(%s) index:%d "
|
|
"ret = %d.", del ? "remove" : "restore",
|
|
mac_str, i, ret);
|
|
}
|
|
}
|
|
return err;
|
|
}
|
|
|
|
static void
|
|
hns3_update_desc_vfid(struct hns3_cmd_desc *desc, uint8_t vfid, bool clr)
|
|
{
|
|
#define HNS3_VF_NUM_IN_FIRST_DESC 192
|
|
uint8_t word_num;
|
|
uint8_t bit_num;
|
|
|
|
if (vfid < HNS3_VF_NUM_IN_FIRST_DESC) {
|
|
word_num = vfid / 32;
|
|
bit_num = vfid % 32;
|
|
if (clr)
|
|
desc[1].data[word_num] &=
|
|
rte_cpu_to_le_32(~(1UL << bit_num));
|
|
else
|
|
desc[1].data[word_num] |=
|
|
rte_cpu_to_le_32(1UL << bit_num);
|
|
} else {
|
|
word_num = (vfid - HNS3_VF_NUM_IN_FIRST_DESC) / 32;
|
|
bit_num = vfid % 32;
|
|
if (clr)
|
|
desc[2].data[word_num] &=
|
|
rte_cpu_to_le_32(~(1UL << bit_num));
|
|
else
|
|
desc[2].data[word_num] |=
|
|
rte_cpu_to_le_32(1UL << bit_num);
|
|
}
|
|
}
|
|
|
|
static int
|
|
hns3_add_mc_addr(struct hns3_hw *hw, struct rte_ether_addr *mac_addr)
|
|
{
|
|
struct hns3_mac_vlan_tbl_entry_cmd req;
|
|
struct hns3_cmd_desc desc[3];
|
|
char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
|
|
uint8_t vf_id;
|
|
int ret;
|
|
|
|
/* Check if mac addr is valid */
|
|
if (!rte_is_multicast_ether_addr(mac_addr)) {
|
|
hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
|
|
mac_addr);
|
|
hns3_err(hw, "failed to add mc mac addr, addr(%s) invalid",
|
|
mac_str);
|
|
return -EINVAL;
|
|
}
|
|
|
|
memset(&req, 0, sizeof(req));
|
|
hns3_set_bit(req.entry_type, HNS3_MAC_VLAN_BIT0_EN_B, 0);
|
|
hns3_prepare_mac_addr(&req, mac_addr->addr_bytes, true);
|
|
ret = hns3_lookup_mac_vlan_tbl(hw, &req, desc, true);
|
|
if (ret) {
|
|
/* This mac addr do not exist, add new entry for it */
|
|
memset(desc[0].data, 0, sizeof(desc[0].data));
|
|
memset(desc[1].data, 0, sizeof(desc[0].data));
|
|
memset(desc[2].data, 0, sizeof(desc[0].data));
|
|
}
|
|
|
|
/*
|
|
* In current version VF is not supported when PF is driven by DPDK
|
|
* driver, just need to configure parameters for PF vport.
|
|
*/
|
|
vf_id = HNS3_PF_FUNC_ID;
|
|
hns3_update_desc_vfid(desc, vf_id, false);
|
|
ret = hns3_add_mac_vlan_tbl(hw, &req, desc);
|
|
if (ret) {
|
|
if (ret == -ENOSPC)
|
|
hns3_err(hw, "mc mac vlan table is full");
|
|
hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
|
|
mac_addr);
|
|
hns3_err(hw, "failed to add mc mac addr(%s): %d", mac_str, ret);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_remove_mc_addr(struct hns3_hw *hw, struct rte_ether_addr *mac_addr)
|
|
{
|
|
struct hns3_mac_vlan_tbl_entry_cmd req;
|
|
struct hns3_cmd_desc desc[3];
|
|
char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
|
|
uint8_t vf_id;
|
|
int ret;
|
|
|
|
/* Check if mac addr is valid */
|
|
if (!rte_is_multicast_ether_addr(mac_addr)) {
|
|
hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
|
|
mac_addr);
|
|
hns3_err(hw, "Failed to rm mc mac addr, addr(%s) invalid",
|
|
mac_str);
|
|
return -EINVAL;
|
|
}
|
|
|
|
memset(&req, 0, sizeof(req));
|
|
hns3_set_bit(req.entry_type, HNS3_MAC_VLAN_BIT0_EN_B, 0);
|
|
hns3_prepare_mac_addr(&req, mac_addr->addr_bytes, true);
|
|
ret = hns3_lookup_mac_vlan_tbl(hw, &req, desc, true);
|
|
if (ret == 0) {
|
|
/*
|
|
* This mac addr exist, remove this handle's VFID for it.
|
|
* In current version VF is not supported when PF is driven by
|
|
* DPDK driver, just need to configure parameters for PF vport.
|
|
*/
|
|
vf_id = HNS3_PF_FUNC_ID;
|
|
hns3_update_desc_vfid(desc, vf_id, true);
|
|
|
|
/* All the vfid is zero, so need to delete this entry */
|
|
ret = hns3_remove_mac_vlan_tbl(hw, &req);
|
|
} else if (ret == -ENOENT) {
|
|
/* This mac addr doesn't exist. */
|
|
return 0;
|
|
}
|
|
|
|
if (ret) {
|
|
hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
|
|
mac_addr);
|
|
hns3_err(hw, "Failed to rm mc mac addr(%s): %d", mac_str, ret);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_set_mc_addr_chk_param(struct hns3_hw *hw,
|
|
struct rte_ether_addr *mc_addr_set,
|
|
uint32_t nb_mc_addr)
|
|
{
|
|
char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
|
|
struct rte_ether_addr *addr;
|
|
uint32_t i;
|
|
uint32_t j;
|
|
|
|
if (nb_mc_addr > HNS3_MC_MACADDR_NUM) {
|
|
hns3_err(hw, "failed to set mc mac addr, nb_mc_addr(%u) "
|
|
"invalid. valid range: 0~%d",
|
|
nb_mc_addr, HNS3_MC_MACADDR_NUM);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Check if input mac addresses are valid */
|
|
for (i = 0; i < nb_mc_addr; i++) {
|
|
addr = &mc_addr_set[i];
|
|
if (!rte_is_multicast_ether_addr(addr)) {
|
|
hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
|
|
addr);
|
|
hns3_err(hw,
|
|
"failed to set mc mac addr, addr(%s) invalid.",
|
|
mac_str);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Check if there are duplicate addresses */
|
|
for (j = i + 1; j < nb_mc_addr; j++) {
|
|
if (rte_is_same_ether_addr(addr, &mc_addr_set[j])) {
|
|
hns3_ether_format_addr(mac_str,
|
|
RTE_ETHER_ADDR_FMT_SIZE,
|
|
addr);
|
|
hns3_err(hw, "failed to set mc mac addr, "
|
|
"addrs invalid. two same addrs(%s).",
|
|
mac_str);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Check if there are duplicate addresses between mac_addrs
|
|
* and mc_addr_set
|
|
*/
|
|
for (j = 0; j < HNS3_UC_MACADDR_NUM; j++) {
|
|
if (rte_is_same_ether_addr(addr,
|
|
&hw->data->mac_addrs[j])) {
|
|
hns3_ether_format_addr(mac_str,
|
|
RTE_ETHER_ADDR_FMT_SIZE,
|
|
addr);
|
|
hns3_err(hw, "failed to set mc mac addr, "
|
|
"addrs invalid. addrs(%s) has already "
|
|
"configured in mac_addr add API",
|
|
mac_str);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
hns3_set_mc_addr_calc_addr(struct hns3_hw *hw,
|
|
struct rte_ether_addr *mc_addr_set,
|
|
int mc_addr_num,
|
|
struct rte_ether_addr *reserved_addr_list,
|
|
int *reserved_addr_num,
|
|
struct rte_ether_addr *add_addr_list,
|
|
int *add_addr_num,
|
|
struct rte_ether_addr *rm_addr_list,
|
|
int *rm_addr_num)
|
|
{
|
|
struct rte_ether_addr *addr;
|
|
int current_addr_num;
|
|
int reserved_num = 0;
|
|
int add_num = 0;
|
|
int rm_num = 0;
|
|
int num;
|
|
int i;
|
|
int j;
|
|
bool same_addr;
|
|
|
|
/* Calculate the mc mac address list that should be removed */
|
|
current_addr_num = hw->mc_addrs_num;
|
|
for (i = 0; i < current_addr_num; i++) {
|
|
addr = &hw->mc_addrs[i];
|
|
same_addr = false;
|
|
for (j = 0; j < mc_addr_num; j++) {
|
|
if (rte_is_same_ether_addr(addr, &mc_addr_set[j])) {
|
|
same_addr = true;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!same_addr) {
|
|
rte_ether_addr_copy(addr, &rm_addr_list[rm_num]);
|
|
rm_num++;
|
|
} else {
|
|
rte_ether_addr_copy(addr,
|
|
&reserved_addr_list[reserved_num]);
|
|
reserved_num++;
|
|
}
|
|
}
|
|
|
|
/* Calculate the mc mac address list that should be added */
|
|
for (i = 0; i < mc_addr_num; i++) {
|
|
addr = &mc_addr_set[i];
|
|
same_addr = false;
|
|
for (j = 0; j < current_addr_num; j++) {
|
|
if (rte_is_same_ether_addr(addr, &hw->mc_addrs[j])) {
|
|
same_addr = true;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!same_addr) {
|
|
rte_ether_addr_copy(addr, &add_addr_list[add_num]);
|
|
add_num++;
|
|
}
|
|
}
|
|
|
|
/* Reorder the mc mac address list maintained by driver */
|
|
for (i = 0; i < reserved_num; i++)
|
|
rte_ether_addr_copy(&reserved_addr_list[i], &hw->mc_addrs[i]);
|
|
|
|
for (i = 0; i < rm_num; i++) {
|
|
num = reserved_num + i;
|
|
rte_ether_addr_copy(&rm_addr_list[i], &hw->mc_addrs[num]);
|
|
}
|
|
|
|
*reserved_addr_num = reserved_num;
|
|
*add_addr_num = add_num;
|
|
*rm_addr_num = rm_num;
|
|
}
|
|
|
|
static int
|
|
hns3_set_mc_mac_addr_list(struct rte_eth_dev *dev,
|
|
struct rte_ether_addr *mc_addr_set,
|
|
uint32_t nb_mc_addr)
|
|
{
|
|
struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
|
|
struct rte_ether_addr reserved_addr_list[HNS3_MC_MACADDR_NUM];
|
|
struct rte_ether_addr add_addr_list[HNS3_MC_MACADDR_NUM];
|
|
struct rte_ether_addr rm_addr_list[HNS3_MC_MACADDR_NUM];
|
|
struct rte_ether_addr *addr;
|
|
int reserved_addr_num;
|
|
int add_addr_num;
|
|
int rm_addr_num;
|
|
int mc_addr_num;
|
|
int num;
|
|
int ret;
|
|
int i;
|
|
|
|
/* Check if input parameters are valid */
|
|
ret = hns3_set_mc_addr_chk_param(hw, mc_addr_set, nb_mc_addr);
|
|
if (ret)
|
|
return ret;
|
|
|
|
rte_spinlock_lock(&hw->lock);
|
|
|
|
/*
|
|
* Calculate the mc mac address lists those should be removed and be
|
|
* added, Reorder the mc mac address list maintained by driver.
|
|
*/
|
|
mc_addr_num = (int)nb_mc_addr;
|
|
hns3_set_mc_addr_calc_addr(hw, mc_addr_set, mc_addr_num,
|
|
reserved_addr_list, &reserved_addr_num,
|
|
add_addr_list, &add_addr_num,
|
|
rm_addr_list, &rm_addr_num);
|
|
|
|
/* Remove mc mac addresses */
|
|
for (i = 0; i < rm_addr_num; i++) {
|
|
num = rm_addr_num - i - 1;
|
|
addr = &rm_addr_list[num];
|
|
ret = hns3_remove_mc_addr(hw, addr);
|
|
if (ret) {
|
|
rte_spinlock_unlock(&hw->lock);
|
|
return ret;
|
|
}
|
|
hw->mc_addrs_num--;
|
|
}
|
|
|
|
/* Add mc mac addresses */
|
|
for (i = 0; i < add_addr_num; i++) {
|
|
addr = &add_addr_list[i];
|
|
ret = hns3_add_mc_addr(hw, addr);
|
|
if (ret) {
|
|
rte_spinlock_unlock(&hw->lock);
|
|
return ret;
|
|
}
|
|
|
|
num = reserved_addr_num + i;
|
|
rte_ether_addr_copy(addr, &hw->mc_addrs[num]);
|
|
hw->mc_addrs_num++;
|
|
}
|
|
rte_spinlock_unlock(&hw->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3_configure_all_mc_mac_addr(struct hns3_adapter *hns, bool del)
|
|
{
|
|
char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
|
|
struct hns3_hw *hw = &hns->hw;
|
|
struct rte_ether_addr *addr;
|
|
int err = 0;
|
|
int ret;
|
|
int i;
|
|
|
|
for (i = 0; i < hw->mc_addrs_num; i++) {
|
|
addr = &hw->mc_addrs[i];
|
|
if (!rte_is_multicast_ether_addr(addr))
|
|
continue;
|
|
if (del)
|
|
ret = hns3_remove_mc_addr(hw, addr);
|
|
else
|
|
ret = hns3_add_mc_addr(hw, addr);
|
|
if (ret) {
|
|
err = ret;
|
|
hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
|
|
addr);
|
|
hns3_dbg(hw, "%s mc mac addr: %s failed for pf: ret = %d",
|
|
del ? "Remove" : "Restore", mac_str, ret);
|
|
}
|
|
}
|
|
return err;
|
|
}
|
|
|
|
static int
|
|
hns3_check_mq_mode(struct rte_eth_dev *dev)
|
|
{
|
|
enum rte_eth_rx_mq_mode rx_mq_mode = dev->data->dev_conf.rxmode.mq_mode;
|
|
enum rte_eth_tx_mq_mode tx_mq_mode = dev->data->dev_conf.txmode.mq_mode;
|
|
struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
|
|
struct hns3_pf *pf = HNS3_DEV_PRIVATE_TO_PF(dev->data->dev_private);
|
|
struct rte_eth_dcb_rx_conf *dcb_rx_conf;
|
|
struct rte_eth_dcb_tx_conf *dcb_tx_conf;
|
|
uint8_t num_tc;
|
|
int max_tc = 0;
|
|
int i;
|
|
|
|
if ((rx_mq_mode & ETH_MQ_RX_VMDQ_FLAG) ||
|
|
(tx_mq_mode == ETH_MQ_TX_VMDQ_DCB ||
|
|
tx_mq_mode == ETH_MQ_TX_VMDQ_ONLY)) {
|
|
hns3_err(hw, "VMDQ is not supported, rx_mq_mode = %d, tx_mq_mode = %d.",
|
|
rx_mq_mode, tx_mq_mode);
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
dcb_rx_conf = &dev->data->dev_conf.rx_adv_conf.dcb_rx_conf;
|
|
dcb_tx_conf = &dev->data->dev_conf.tx_adv_conf.dcb_tx_conf;
|
|
if (rx_mq_mode & ETH_MQ_RX_DCB_FLAG) {
|
|
if (dcb_rx_conf->nb_tcs > pf->tc_max) {
|
|
hns3_err(hw, "nb_tcs(%u) > max_tc(%u) driver supported.",
|
|
dcb_rx_conf->nb_tcs, pf->tc_max);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!(dcb_rx_conf->nb_tcs == HNS3_4_TCS ||
|
|
dcb_rx_conf->nb_tcs == HNS3_8_TCS)) {
|
|
hns3_err(hw, "on ETH_MQ_RX_DCB_RSS mode, "
|
|
"nb_tcs(%d) != %d or %d in rx direction.",
|
|
dcb_rx_conf->nb_tcs, HNS3_4_TCS, HNS3_8_TCS);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (dcb_rx_conf->nb_tcs != dcb_tx_conf->nb_tcs) {
|
|
hns3_err(hw, "num_tcs(%d) of tx is not equal to rx(%d)",
|
|
dcb_tx_conf->nb_tcs, dcb_rx_conf->nb_tcs);
|
|
return -EINVAL;
|
|
}
|
|
|
|
for (i = 0; i < HNS3_MAX_USER_PRIO; i++) {
|
|
if (dcb_rx_conf->dcb_tc[i] != dcb_tx_conf->dcb_tc[i]) {
|
|
hns3_err(hw, "dcb_tc[%d] = %u in rx direction, "
|
|
"is not equal to one in tx direction.",
|
|
i, dcb_rx_conf->dcb_tc[i]);
|
|
return -EINVAL;
|
|
}
|
|
if (dcb_rx_conf->dcb_tc[i] > max_tc)
|
|
max_tc = dcb_rx_conf->dcb_tc[i];
|
|
}
|
|
|
|
num_tc = max_tc + 1;
|
|
if (num_tc > dcb_rx_conf->nb_tcs) {
|
|
hns3_err(hw, "max num_tc(%u) mapped > nb_tcs(%u)",
|
|
num_tc, dcb_rx_conf->nb_tcs);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3_bind_ring_with_vector(struct hns3_hw *hw, uint16_t vector_id, bool en,
|
|
enum hns3_ring_type queue_type, uint16_t queue_id)
|
|
{
|
|
struct hns3_cmd_desc desc;
|
|
struct hns3_ctrl_vector_chain_cmd *req =
|
|
(struct hns3_ctrl_vector_chain_cmd *)desc.data;
|
|
enum hns3_opcode_type op;
|
|
uint16_t tqp_type_and_id = 0;
|
|
uint16_t type;
|
|
uint16_t gl;
|
|
int ret;
|
|
|
|
op = en ? HNS3_OPC_ADD_RING_TO_VECTOR : HNS3_OPC_DEL_RING_TO_VECTOR;
|
|
hns3_cmd_setup_basic_desc(&desc, op, false);
|
|
req->int_vector_id = hns3_get_field(vector_id, HNS3_TQP_INT_ID_L_M,
|
|
HNS3_TQP_INT_ID_L_S);
|
|
req->int_vector_id_h = hns3_get_field(vector_id, HNS3_TQP_INT_ID_H_M,
|
|
HNS3_TQP_INT_ID_H_S);
|
|
|
|
if (queue_type == HNS3_RING_TYPE_RX)
|
|
gl = HNS3_RING_GL_RX;
|
|
else
|
|
gl = HNS3_RING_GL_TX;
|
|
|
|
type = queue_type;
|
|
|
|
hns3_set_field(tqp_type_and_id, HNS3_INT_TYPE_M, HNS3_INT_TYPE_S,
|
|
type);
|
|
hns3_set_field(tqp_type_and_id, HNS3_TQP_ID_M, HNS3_TQP_ID_S, queue_id);
|
|
hns3_set_field(tqp_type_and_id, HNS3_INT_GL_IDX_M, HNS3_INT_GL_IDX_S,
|
|
gl);
|
|
req->tqp_type_and_id[0] = rte_cpu_to_le_16(tqp_type_and_id);
|
|
req->int_cause_num = 1;
|
|
ret = hns3_cmd_send(hw, &desc, 1);
|
|
if (ret) {
|
|
hns3_err(hw, "%s TQP %u fail, vector_id = %u, ret = %d.",
|
|
en ? "Map" : "Unmap", queue_id, vector_id, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3_init_ring_with_vector(struct hns3_hw *hw)
|
|
{
|
|
uint16_t vec;
|
|
int ret;
|
|
int i;
|
|
|
|
/*
|
|
* In hns3 network engine, vector 0 is always the misc interrupt of this
|
|
* function, vector 1~N can be used respectively for the queues of the
|
|
* function. Tx and Rx queues with the same number share the interrupt
|
|
* vector. In the initialization clearing the all hardware mapping
|
|
* relationship configurations between queues and interrupt vectors is
|
|
* needed, so some error caused by the residual configurations, such as
|
|
* the unexpected Tx interrupt, can be avoid.
|
|
*/
|
|
vec = hw->num_msi - 1; /* vector 0 for misc interrupt, not for queue */
|
|
if (hw->intr.mapping_mode == HNS3_INTR_MAPPING_VEC_RSV_ONE)
|
|
vec = vec - 1; /* the last interrupt is reserved */
|
|
hw->intr_tqps_num = RTE_MIN(vec, hw->tqps_num);
|
|
for (i = 0; i < hw->intr_tqps_num; i++) {
|
|
/*
|
|
* Set gap limiter/rate limiter/quanity limiter algorithm
|
|
* configuration for interrupt coalesce of queue's interrupt.
|
|
*/
|
|
hns3_set_queue_intr_gl(hw, i, HNS3_RING_GL_RX,
|
|
HNS3_TQP_INTR_GL_DEFAULT);
|
|
hns3_set_queue_intr_gl(hw, i, HNS3_RING_GL_TX,
|
|
HNS3_TQP_INTR_GL_DEFAULT);
|
|
hns3_set_queue_intr_rl(hw, i, HNS3_TQP_INTR_RL_DEFAULT);
|
|
/*
|
|
* QL(quantity limiter) is not used currently, just set 0 to
|
|
* close it.
|
|
*/
|
|
hns3_set_queue_intr_ql(hw, i, HNS3_TQP_INTR_QL_DEFAULT);
|
|
|
|
ret = hns3_bind_ring_with_vector(hw, vec, false,
|
|
HNS3_RING_TYPE_TX, i);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "PF fail to unbind TX ring(%d) with "
|
|
"vector: %u, ret=%d", i, vec, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = hns3_bind_ring_with_vector(hw, vec, false,
|
|
HNS3_RING_TYPE_RX, i);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "PF fail to unbind RX ring(%d) with "
|
|
"vector: %u, ret=%d", i, vec, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3_refresh_mtu(struct rte_eth_dev *dev, struct rte_eth_conf *conf)
|
|
{
|
|
struct hns3_adapter *hns = dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
uint32_t max_rx_pkt_len;
|
|
uint16_t mtu;
|
|
int ret;
|
|
|
|
if (!(conf->rxmode.offloads & DEV_RX_OFFLOAD_JUMBO_FRAME))
|
|
return 0;
|
|
|
|
/*
|
|
* If jumbo frames are enabled, MTU needs to be refreshed
|
|
* according to the maximum RX packet length.
|
|
*/
|
|
max_rx_pkt_len = conf->rxmode.max_rx_pkt_len;
|
|
if (max_rx_pkt_len > HNS3_MAX_FRAME_LEN ||
|
|
max_rx_pkt_len <= HNS3_DEFAULT_FRAME_LEN) {
|
|
hns3_err(hw, "maximum Rx packet length must be greater than %u "
|
|
"and no more than %u when jumbo frame enabled.",
|
|
(uint16_t)HNS3_DEFAULT_FRAME_LEN,
|
|
(uint16_t)HNS3_MAX_FRAME_LEN);
|
|
return -EINVAL;
|
|
}
|
|
|
|
mtu = (uint16_t)HNS3_PKTLEN_TO_MTU(max_rx_pkt_len);
|
|
ret = hns3_dev_mtu_set(dev, mtu);
|
|
if (ret)
|
|
return ret;
|
|
dev->data->mtu = mtu;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3_setup_dcb(struct rte_eth_dev *dev)
|
|
{
|
|
struct hns3_adapter *hns = dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int ret;
|
|
|
|
if (!hns3_dev_dcb_supported(hw)) {
|
|
hns3_err(hw, "this port does not support dcb configurations.");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
if (hw->current_fc_status == HNS3_FC_STATUS_MAC_PAUSE) {
|
|
hns3_err(hw, "MAC pause enabled, cannot config dcb info.");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
ret = hns3_dcb_configure(hns);
|
|
if (ret)
|
|
hns3_err(hw, "failed to config dcb: %d", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_check_link_speed(struct hns3_hw *hw, uint32_t link_speeds)
|
|
{
|
|
int ret;
|
|
|
|
/*
|
|
* Some hardware doesn't support auto-negotiation, but users may not
|
|
* configure link_speeds (default 0), which means auto-negotiation.
|
|
* In this case, a warning message need to be printed, instead of
|
|
* an error.
|
|
*/
|
|
if (link_speeds == ETH_LINK_SPEED_AUTONEG &&
|
|
hw->mac.support_autoneg == 0) {
|
|
hns3_warn(hw, "auto-negotiation is not supported, use default fixed speed!");
|
|
return 0;
|
|
}
|
|
|
|
if (link_speeds != ETH_LINK_SPEED_AUTONEG) {
|
|
ret = hns3_check_port_speed(hw, link_speeds);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3_check_dev_conf(struct rte_eth_dev *dev)
|
|
{
|
|
struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
|
|
struct rte_eth_conf *conf = &dev->data->dev_conf;
|
|
int ret;
|
|
|
|
ret = hns3_check_mq_mode(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return hns3_check_link_speed(hw, conf->link_speeds);
|
|
}
|
|
|
|
static int
|
|
hns3_dev_configure(struct rte_eth_dev *dev)
|
|
{
|
|
struct hns3_adapter *hns = dev->data->dev_private;
|
|
struct rte_eth_conf *conf = &dev->data->dev_conf;
|
|
enum rte_eth_rx_mq_mode mq_mode = conf->rxmode.mq_mode;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
uint16_t nb_rx_q = dev->data->nb_rx_queues;
|
|
uint16_t nb_tx_q = dev->data->nb_tx_queues;
|
|
struct rte_eth_rss_conf rss_conf;
|
|
bool gro_en;
|
|
int ret;
|
|
|
|
hw->cfg_max_queues = RTE_MAX(nb_rx_q, nb_tx_q);
|
|
|
|
/*
|
|
* Some versions of hardware network engine does not support
|
|
* individually enable/disable/reset the Tx or Rx queue. These devices
|
|
* must enable/disable/reset Tx and Rx queues at the same time. When the
|
|
* numbers of Tx queues allocated by upper applications are not equal to
|
|
* the numbers of Rx queues, driver needs to setup fake Tx or Rx queues
|
|
* to adjust numbers of Tx/Rx queues. otherwise, network engine can not
|
|
* work as usual. But these fake queues are imperceptible, and can not
|
|
* be used by upper applications.
|
|
*/
|
|
ret = hns3_set_fake_rx_or_tx_queues(dev, nb_rx_q, nb_tx_q);
|
|
if (ret) {
|
|
hns3_err(hw, "fail to set Rx/Tx fake queues, ret = %d.", ret);
|
|
hw->cfg_max_queues = 0;
|
|
return ret;
|
|
}
|
|
|
|
hw->adapter_state = HNS3_NIC_CONFIGURING;
|
|
ret = hns3_check_dev_conf(dev);
|
|
if (ret)
|
|
goto cfg_err;
|
|
|
|
if ((uint32_t)mq_mode & ETH_MQ_RX_DCB_FLAG) {
|
|
ret = hns3_setup_dcb(dev);
|
|
if (ret)
|
|
goto cfg_err;
|
|
}
|
|
|
|
/* When RSS is not configured, redirect the packet queue 0 */
|
|
if ((uint32_t)mq_mode & ETH_MQ_RX_RSS_FLAG) {
|
|
conf->rxmode.offloads |= DEV_RX_OFFLOAD_RSS_HASH;
|
|
rss_conf = conf->rx_adv_conf.rss_conf;
|
|
hw->rss_dis_flag = false;
|
|
ret = hns3_dev_rss_hash_update(dev, &rss_conf);
|
|
if (ret)
|
|
goto cfg_err;
|
|
}
|
|
|
|
ret = hns3_refresh_mtu(dev, conf);
|
|
if (ret)
|
|
goto cfg_err;
|
|
|
|
ret = hns3_mbuf_dyn_rx_timestamp_register(dev, conf);
|
|
if (ret)
|
|
goto cfg_err;
|
|
|
|
ret = hns3_dev_configure_vlan(dev);
|
|
if (ret)
|
|
goto cfg_err;
|
|
|
|
/* config hardware GRO */
|
|
gro_en = conf->rxmode.offloads & DEV_RX_OFFLOAD_TCP_LRO ? true : false;
|
|
ret = hns3_config_gro(hw, gro_en);
|
|
if (ret)
|
|
goto cfg_err;
|
|
|
|
hns3_init_rx_ptype_tble(dev);
|
|
hw->adapter_state = HNS3_NIC_CONFIGURED;
|
|
|
|
return 0;
|
|
|
|
cfg_err:
|
|
hw->cfg_max_queues = 0;
|
|
(void)hns3_set_fake_rx_or_tx_queues(dev, 0, 0);
|
|
hw->adapter_state = HNS3_NIC_INITIALIZED;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_set_mac_mtu(struct hns3_hw *hw, uint16_t new_mps)
|
|
{
|
|
struct hns3_config_max_frm_size_cmd *req;
|
|
struct hns3_cmd_desc desc;
|
|
|
|
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_CONFIG_MAX_FRM_SIZE, false);
|
|
|
|
req = (struct hns3_config_max_frm_size_cmd *)desc.data;
|
|
req->max_frm_size = rte_cpu_to_le_16(new_mps);
|
|
req->min_frm_size = RTE_ETHER_MIN_LEN;
|
|
|
|
return hns3_cmd_send(hw, &desc, 1);
|
|
}
|
|
|
|
static int
|
|
hns3_config_mtu(struct hns3_hw *hw, uint16_t mps)
|
|
{
|
|
struct hns3_adapter *hns = HNS3_DEV_HW_TO_ADAPTER(hw);
|
|
uint16_t original_mps = hns->pf.mps;
|
|
int err;
|
|
int ret;
|
|
|
|
ret = hns3_set_mac_mtu(hw, mps);
|
|
if (ret) {
|
|
hns3_err(hw, "failed to set mtu, ret = %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
hns->pf.mps = mps;
|
|
ret = hns3_buffer_alloc(hw);
|
|
if (ret) {
|
|
hns3_err(hw, "failed to allocate buffer, ret = %d", ret);
|
|
goto rollback;
|
|
}
|
|
|
|
return 0;
|
|
|
|
rollback:
|
|
err = hns3_set_mac_mtu(hw, original_mps);
|
|
if (err) {
|
|
hns3_err(hw, "fail to rollback MTU, err = %d", err);
|
|
return ret;
|
|
}
|
|
hns->pf.mps = original_mps;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
|
|
{
|
|
struct hns3_adapter *hns = dev->data->dev_private;
|
|
uint32_t frame_size = mtu + HNS3_ETH_OVERHEAD;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
bool is_jumbo_frame;
|
|
int ret;
|
|
|
|
if (dev->data->dev_started) {
|
|
hns3_err(hw, "Failed to set mtu, port %u must be stopped "
|
|
"before configuration", dev->data->port_id);
|
|
return -EBUSY;
|
|
}
|
|
|
|
rte_spinlock_lock(&hw->lock);
|
|
is_jumbo_frame = frame_size > HNS3_DEFAULT_FRAME_LEN ? true : false;
|
|
frame_size = RTE_MAX(frame_size, HNS3_DEFAULT_FRAME_LEN);
|
|
|
|
/*
|
|
* Maximum value of frame_size is HNS3_MAX_FRAME_LEN, so it can safely
|
|
* assign to "uint16_t" type variable.
|
|
*/
|
|
ret = hns3_config_mtu(hw, (uint16_t)frame_size);
|
|
if (ret) {
|
|
rte_spinlock_unlock(&hw->lock);
|
|
hns3_err(hw, "Failed to set mtu, port %u mtu %u: %d",
|
|
dev->data->port_id, mtu, ret);
|
|
return ret;
|
|
}
|
|
|
|
if (is_jumbo_frame)
|
|
dev->data->dev_conf.rxmode.offloads |=
|
|
DEV_RX_OFFLOAD_JUMBO_FRAME;
|
|
else
|
|
dev->data->dev_conf.rxmode.offloads &=
|
|
~DEV_RX_OFFLOAD_JUMBO_FRAME;
|
|
dev->data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
|
|
rte_spinlock_unlock(&hw->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static uint32_t
|
|
hns3_get_copper_port_speed_capa(uint32_t supported_speed)
|
|
{
|
|
uint32_t speed_capa = 0;
|
|
|
|
if (supported_speed & HNS3_PHY_LINK_SPEED_10M_HD_BIT)
|
|
speed_capa |= ETH_LINK_SPEED_10M_HD;
|
|
if (supported_speed & HNS3_PHY_LINK_SPEED_10M_BIT)
|
|
speed_capa |= ETH_LINK_SPEED_10M;
|
|
if (supported_speed & HNS3_PHY_LINK_SPEED_100M_HD_BIT)
|
|
speed_capa |= ETH_LINK_SPEED_100M_HD;
|
|
if (supported_speed & HNS3_PHY_LINK_SPEED_100M_BIT)
|
|
speed_capa |= ETH_LINK_SPEED_100M;
|
|
if (supported_speed & HNS3_PHY_LINK_SPEED_1000M_BIT)
|
|
speed_capa |= ETH_LINK_SPEED_1G;
|
|
|
|
return speed_capa;
|
|
}
|
|
|
|
static uint32_t
|
|
hns3_get_firber_port_speed_capa(uint32_t supported_speed)
|
|
{
|
|
uint32_t speed_capa = 0;
|
|
|
|
if (supported_speed & HNS3_FIBER_LINK_SPEED_1G_BIT)
|
|
speed_capa |= ETH_LINK_SPEED_1G;
|
|
if (supported_speed & HNS3_FIBER_LINK_SPEED_10G_BIT)
|
|
speed_capa |= ETH_LINK_SPEED_10G;
|
|
if (supported_speed & HNS3_FIBER_LINK_SPEED_25G_BIT)
|
|
speed_capa |= ETH_LINK_SPEED_25G;
|
|
if (supported_speed & HNS3_FIBER_LINK_SPEED_40G_BIT)
|
|
speed_capa |= ETH_LINK_SPEED_40G;
|
|
if (supported_speed & HNS3_FIBER_LINK_SPEED_50G_BIT)
|
|
speed_capa |= ETH_LINK_SPEED_50G;
|
|
if (supported_speed & HNS3_FIBER_LINK_SPEED_100G_BIT)
|
|
speed_capa |= ETH_LINK_SPEED_100G;
|
|
if (supported_speed & HNS3_FIBER_LINK_SPEED_200G_BIT)
|
|
speed_capa |= ETH_LINK_SPEED_200G;
|
|
|
|
return speed_capa;
|
|
}
|
|
|
|
static uint32_t
|
|
hns3_get_speed_capa(struct hns3_hw *hw)
|
|
{
|
|
struct hns3_mac *mac = &hw->mac;
|
|
uint32_t speed_capa;
|
|
|
|
if (mac->media_type == HNS3_MEDIA_TYPE_COPPER)
|
|
speed_capa =
|
|
hns3_get_copper_port_speed_capa(mac->supported_speed);
|
|
else
|
|
speed_capa =
|
|
hns3_get_firber_port_speed_capa(mac->supported_speed);
|
|
|
|
if (mac->support_autoneg == 0)
|
|
speed_capa |= ETH_LINK_SPEED_FIXED;
|
|
|
|
return speed_capa;
|
|
}
|
|
|
|
int
|
|
hns3_dev_infos_get(struct rte_eth_dev *eth_dev, struct rte_eth_dev_info *info)
|
|
{
|
|
struct hns3_adapter *hns = eth_dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
uint16_t queue_num = hw->tqps_num;
|
|
|
|
/*
|
|
* In interrupt mode, 'max_rx_queues' is set based on the number of
|
|
* MSI-X interrupt resources of the hardware.
|
|
*/
|
|
if (hw->data->dev_conf.intr_conf.rxq == 1)
|
|
queue_num = hw->intr_tqps_num;
|
|
|
|
info->max_rx_queues = queue_num;
|
|
info->max_tx_queues = hw->tqps_num;
|
|
info->max_rx_pktlen = HNS3_MAX_FRAME_LEN; /* CRC included */
|
|
info->min_rx_bufsize = HNS3_MIN_BD_BUF_SIZE;
|
|
info->max_mac_addrs = HNS3_UC_MACADDR_NUM;
|
|
info->max_mtu = info->max_rx_pktlen - HNS3_ETH_OVERHEAD;
|
|
info->max_lro_pkt_size = HNS3_MAX_LRO_SIZE;
|
|
info->rx_offload_capa = (DEV_RX_OFFLOAD_IPV4_CKSUM |
|
|
DEV_RX_OFFLOAD_TCP_CKSUM |
|
|
DEV_RX_OFFLOAD_UDP_CKSUM |
|
|
DEV_RX_OFFLOAD_SCTP_CKSUM |
|
|
DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM |
|
|
DEV_RX_OFFLOAD_OUTER_UDP_CKSUM |
|
|
DEV_RX_OFFLOAD_KEEP_CRC |
|
|
DEV_RX_OFFLOAD_SCATTER |
|
|
DEV_RX_OFFLOAD_VLAN_STRIP |
|
|
DEV_RX_OFFLOAD_VLAN_FILTER |
|
|
DEV_RX_OFFLOAD_JUMBO_FRAME |
|
|
DEV_RX_OFFLOAD_RSS_HASH |
|
|
DEV_RX_OFFLOAD_TCP_LRO);
|
|
info->tx_offload_capa = (DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM |
|
|
DEV_TX_OFFLOAD_IPV4_CKSUM |
|
|
DEV_TX_OFFLOAD_TCP_CKSUM |
|
|
DEV_TX_OFFLOAD_UDP_CKSUM |
|
|
DEV_TX_OFFLOAD_SCTP_CKSUM |
|
|
DEV_TX_OFFLOAD_MULTI_SEGS |
|
|
DEV_TX_OFFLOAD_TCP_TSO |
|
|
DEV_TX_OFFLOAD_VXLAN_TNL_TSO |
|
|
DEV_TX_OFFLOAD_GRE_TNL_TSO |
|
|
DEV_TX_OFFLOAD_GENEVE_TNL_TSO |
|
|
DEV_TX_OFFLOAD_MBUF_FAST_FREE |
|
|
hns3_txvlan_cap_get(hw));
|
|
|
|
if (hns3_dev_outer_udp_cksum_supported(hw))
|
|
info->tx_offload_capa |= DEV_TX_OFFLOAD_OUTER_UDP_CKSUM;
|
|
|
|
if (hns3_dev_indep_txrx_supported(hw))
|
|
info->dev_capa = RTE_ETH_DEV_CAPA_RUNTIME_RX_QUEUE_SETUP |
|
|
RTE_ETH_DEV_CAPA_RUNTIME_TX_QUEUE_SETUP;
|
|
|
|
if (hns3_dev_ptp_supported(hw))
|
|
info->rx_offload_capa |= DEV_RX_OFFLOAD_TIMESTAMP;
|
|
|
|
info->rx_desc_lim = (struct rte_eth_desc_lim) {
|
|
.nb_max = HNS3_MAX_RING_DESC,
|
|
.nb_min = HNS3_MIN_RING_DESC,
|
|
.nb_align = HNS3_ALIGN_RING_DESC,
|
|
};
|
|
|
|
info->tx_desc_lim = (struct rte_eth_desc_lim) {
|
|
.nb_max = HNS3_MAX_RING_DESC,
|
|
.nb_min = HNS3_MIN_RING_DESC,
|
|
.nb_align = HNS3_ALIGN_RING_DESC,
|
|
.nb_seg_max = HNS3_MAX_TSO_BD_PER_PKT,
|
|
.nb_mtu_seg_max = hw->max_non_tso_bd_num,
|
|
};
|
|
|
|
info->speed_capa = hns3_get_speed_capa(hw);
|
|
info->default_rxconf = (struct rte_eth_rxconf) {
|
|
.rx_free_thresh = HNS3_DEFAULT_RX_FREE_THRESH,
|
|
/*
|
|
* If there are no available Rx buffer descriptors, incoming
|
|
* packets are always dropped by hardware based on hns3 network
|
|
* engine.
|
|
*/
|
|
.rx_drop_en = 1,
|
|
.offloads = 0,
|
|
};
|
|
info->default_txconf = (struct rte_eth_txconf) {
|
|
.tx_rs_thresh = HNS3_DEFAULT_TX_RS_THRESH,
|
|
.offloads = 0,
|
|
};
|
|
|
|
info->reta_size = hw->rss_ind_tbl_size;
|
|
info->hash_key_size = HNS3_RSS_KEY_SIZE;
|
|
info->flow_type_rss_offloads = HNS3_ETH_RSS_SUPPORT;
|
|
|
|
info->default_rxportconf.burst_size = HNS3_DEFAULT_PORT_CONF_BURST_SIZE;
|
|
info->default_txportconf.burst_size = HNS3_DEFAULT_PORT_CONF_BURST_SIZE;
|
|
info->default_rxportconf.nb_queues = HNS3_DEFAULT_PORT_CONF_QUEUES_NUM;
|
|
info->default_txportconf.nb_queues = HNS3_DEFAULT_PORT_CONF_QUEUES_NUM;
|
|
info->default_rxportconf.ring_size = HNS3_DEFAULT_RING_DESC;
|
|
info->default_txportconf.ring_size = HNS3_DEFAULT_RING_DESC;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3_fw_version_get(struct rte_eth_dev *eth_dev, char *fw_version,
|
|
size_t fw_size)
|
|
{
|
|
struct hns3_adapter *hns = eth_dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
uint32_t version = hw->fw_version;
|
|
int ret;
|
|
|
|
ret = snprintf(fw_version, fw_size, "%lu.%lu.%lu.%lu",
|
|
hns3_get_field(version, HNS3_FW_VERSION_BYTE3_M,
|
|
HNS3_FW_VERSION_BYTE3_S),
|
|
hns3_get_field(version, HNS3_FW_VERSION_BYTE2_M,
|
|
HNS3_FW_VERSION_BYTE2_S),
|
|
hns3_get_field(version, HNS3_FW_VERSION_BYTE1_M,
|
|
HNS3_FW_VERSION_BYTE1_S),
|
|
hns3_get_field(version, HNS3_FW_VERSION_BYTE0_M,
|
|
HNS3_FW_VERSION_BYTE0_S));
|
|
if (ret < 0)
|
|
return -EINVAL;
|
|
|
|
ret += 1; /* add the size of '\0' */
|
|
if (fw_size < (size_t)ret)
|
|
return ret;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3_update_port_link_info(struct rte_eth_dev *eth_dev)
|
|
{
|
|
struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(eth_dev->data->dev_private);
|
|
int ret;
|
|
|
|
(void)hns3_update_link_status(hw);
|
|
|
|
ret = hns3_update_link_info(eth_dev);
|
|
if (ret)
|
|
hw->mac.link_status = ETH_LINK_DOWN;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void
|
|
hns3_setup_linkstatus(struct rte_eth_dev *eth_dev,
|
|
struct rte_eth_link *new_link)
|
|
{
|
|
struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(eth_dev->data->dev_private);
|
|
struct hns3_mac *mac = &hw->mac;
|
|
|
|
switch (mac->link_speed) {
|
|
case ETH_SPEED_NUM_10M:
|
|
case ETH_SPEED_NUM_100M:
|
|
case ETH_SPEED_NUM_1G:
|
|
case ETH_SPEED_NUM_10G:
|
|
case ETH_SPEED_NUM_25G:
|
|
case ETH_SPEED_NUM_40G:
|
|
case ETH_SPEED_NUM_50G:
|
|
case ETH_SPEED_NUM_100G:
|
|
case ETH_SPEED_NUM_200G:
|
|
if (mac->link_status)
|
|
new_link->link_speed = mac->link_speed;
|
|
break;
|
|
default:
|
|
if (mac->link_status)
|
|
new_link->link_speed = ETH_SPEED_NUM_UNKNOWN;
|
|
break;
|
|
}
|
|
|
|
if (!mac->link_status)
|
|
new_link->link_speed = ETH_SPEED_NUM_NONE;
|
|
|
|
new_link->link_duplex = mac->link_duplex;
|
|
new_link->link_status = mac->link_status ? ETH_LINK_UP : ETH_LINK_DOWN;
|
|
new_link->link_autoneg = mac->link_autoneg;
|
|
}
|
|
|
|
static int
|
|
hns3_dev_link_update(struct rte_eth_dev *eth_dev, int wait_to_complete)
|
|
{
|
|
#define HNS3_LINK_CHECK_INTERVAL 100 /* 100ms */
|
|
#define HNS3_MAX_LINK_CHECK_TIMES 20 /* 2s (100 * 20ms) in total */
|
|
|
|
struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(eth_dev->data->dev_private);
|
|
uint32_t retry_cnt = HNS3_MAX_LINK_CHECK_TIMES;
|
|
struct hns3_mac *mac = &hw->mac;
|
|
struct rte_eth_link new_link;
|
|
int ret;
|
|
|
|
/* When port is stopped, report link down. */
|
|
if (eth_dev->data->dev_started == 0) {
|
|
new_link.link_autoneg = mac->link_autoneg;
|
|
new_link.link_duplex = mac->link_duplex;
|
|
new_link.link_speed = ETH_SPEED_NUM_NONE;
|
|
new_link.link_status = ETH_LINK_DOWN;
|
|
goto out;
|
|
}
|
|
|
|
do {
|
|
ret = hns3_update_port_link_info(eth_dev);
|
|
if (ret) {
|
|
hns3_err(hw, "failed to get port link info, ret = %d.",
|
|
ret);
|
|
break;
|
|
}
|
|
|
|
if (!wait_to_complete || mac->link_status == ETH_LINK_UP)
|
|
break;
|
|
|
|
rte_delay_ms(HNS3_LINK_CHECK_INTERVAL);
|
|
} while (retry_cnt--);
|
|
|
|
memset(&new_link, 0, sizeof(new_link));
|
|
hns3_setup_linkstatus(eth_dev, &new_link);
|
|
|
|
out:
|
|
return rte_eth_linkstatus_set(eth_dev, &new_link);
|
|
}
|
|
|
|
static int
|
|
hns3_parse_func_status(struct hns3_hw *hw, struct hns3_func_status_cmd *status)
|
|
{
|
|
struct hns3_adapter *hns = HNS3_DEV_HW_TO_ADAPTER(hw);
|
|
struct hns3_pf *pf = &hns->pf;
|
|
|
|
if (!(status->pf_state & HNS3_PF_STATE_DONE))
|
|
return -EINVAL;
|
|
|
|
pf->is_main_pf = (status->pf_state & HNS3_PF_STATE_MAIN) ? true : false;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3_query_function_status(struct hns3_hw *hw)
|
|
{
|
|
#define HNS3_QUERY_MAX_CNT 10
|
|
#define HNS3_QUERY_SLEEP_MSCOEND 1
|
|
struct hns3_func_status_cmd *req;
|
|
struct hns3_cmd_desc desc;
|
|
int timeout = 0;
|
|
int ret;
|
|
|
|
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_QUERY_FUNC_STATUS, true);
|
|
req = (struct hns3_func_status_cmd *)desc.data;
|
|
|
|
do {
|
|
ret = hns3_cmd_send(hw, &desc, 1);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "query function status failed %d",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Check pf reset is done */
|
|
if (req->pf_state)
|
|
break;
|
|
|
|
rte_delay_ms(HNS3_QUERY_SLEEP_MSCOEND);
|
|
} while (timeout++ < HNS3_QUERY_MAX_CNT);
|
|
|
|
return hns3_parse_func_status(hw, req);
|
|
}
|
|
|
|
static int
|
|
hns3_get_pf_max_tqp_num(struct hns3_hw *hw)
|
|
{
|
|
struct hns3_adapter *hns = HNS3_DEV_HW_TO_ADAPTER(hw);
|
|
struct hns3_pf *pf = &hns->pf;
|
|
|
|
if (pf->tqp_config_mode == HNS3_FLEX_MAX_TQP_NUM_MODE) {
|
|
/*
|
|
* The total_tqps_num obtained from firmware is maximum tqp
|
|
* numbers of this port, which should be used for PF and VFs.
|
|
* There is no need for pf to have so many tqp numbers in
|
|
* most cases. RTE_LIBRTE_HNS3_MAX_TQP_NUM_PER_PF,
|
|
* coming from config file, is assigned to maximum queue number
|
|
* for the PF of this port by user. So users can modify the
|
|
* maximum queue number of PF according to their own application
|
|
* scenarios, which is more flexible to use. In addition, many
|
|
* memories can be saved due to allocating queue statistics
|
|
* room according to the actual number of queues required. The
|
|
* maximum queue number of PF for network engine with
|
|
* revision_id greater than 0x30 is assigned by config file.
|
|
*/
|
|
if (RTE_LIBRTE_HNS3_MAX_TQP_NUM_PER_PF <= 0) {
|
|
hns3_err(hw, "RTE_LIBRTE_HNS3_MAX_TQP_NUM_PER_PF(%d) "
|
|
"must be greater than 0.",
|
|
RTE_LIBRTE_HNS3_MAX_TQP_NUM_PER_PF);
|
|
return -EINVAL;
|
|
}
|
|
|
|
hw->tqps_num = RTE_MIN(RTE_LIBRTE_HNS3_MAX_TQP_NUM_PER_PF,
|
|
hw->total_tqps_num);
|
|
} else {
|
|
/*
|
|
* Due to the limitation on the number of PF interrupts
|
|
* available, the maximum queue number assigned to PF on
|
|
* the network engine with revision_id 0x21 is 64.
|
|
*/
|
|
hw->tqps_num = RTE_MIN(hw->total_tqps_num,
|
|
HNS3_MAX_TQP_NUM_HIP08_PF);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3_query_pf_resource(struct hns3_hw *hw)
|
|
{
|
|
struct hns3_adapter *hns = HNS3_DEV_HW_TO_ADAPTER(hw);
|
|
struct hns3_pf *pf = &hns->pf;
|
|
struct hns3_pf_res_cmd *req;
|
|
struct hns3_cmd_desc desc;
|
|
int ret;
|
|
|
|
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_QUERY_PF_RSRC, true);
|
|
ret = hns3_cmd_send(hw, &desc, 1);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "query pf resource failed %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
req = (struct hns3_pf_res_cmd *)desc.data;
|
|
hw->total_tqps_num = rte_le_to_cpu_16(req->tqp_num) +
|
|
rte_le_to_cpu_16(req->ext_tqp_num);
|
|
ret = hns3_get_pf_max_tqp_num(hw);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pf->pkt_buf_size = rte_le_to_cpu_16(req->buf_size) << HNS3_BUF_UNIT_S;
|
|
pf->func_num = rte_le_to_cpu_16(req->pf_own_fun_number);
|
|
|
|
if (req->tx_buf_size)
|
|
pf->tx_buf_size =
|
|
rte_le_to_cpu_16(req->tx_buf_size) << HNS3_BUF_UNIT_S;
|
|
else
|
|
pf->tx_buf_size = HNS3_DEFAULT_TX_BUF;
|
|
|
|
pf->tx_buf_size = roundup(pf->tx_buf_size, HNS3_BUF_SIZE_UNIT);
|
|
|
|
if (req->dv_buf_size)
|
|
pf->dv_buf_size =
|
|
rte_le_to_cpu_16(req->dv_buf_size) << HNS3_BUF_UNIT_S;
|
|
else
|
|
pf->dv_buf_size = HNS3_DEFAULT_DV;
|
|
|
|
pf->dv_buf_size = roundup(pf->dv_buf_size, HNS3_BUF_SIZE_UNIT);
|
|
|
|
hw->num_msi =
|
|
hns3_get_field(rte_le_to_cpu_16(req->nic_pf_intr_vector_number),
|
|
HNS3_PF_VEC_NUM_M, HNS3_PF_VEC_NUM_S);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
hns3_parse_cfg(struct hns3_cfg *cfg, struct hns3_cmd_desc *desc)
|
|
{
|
|
struct hns3_cfg_param_cmd *req;
|
|
uint64_t mac_addr_tmp_high;
|
|
uint8_t ext_rss_size_max;
|
|
uint64_t mac_addr_tmp;
|
|
uint32_t i;
|
|
|
|
req = (struct hns3_cfg_param_cmd *)desc[0].data;
|
|
|
|
/* get the configuration */
|
|
cfg->tc_num = hns3_get_field(rte_le_to_cpu_32(req->param[0]),
|
|
HNS3_CFG_TC_NUM_M, HNS3_CFG_TC_NUM_S);
|
|
cfg->tqp_desc_num = hns3_get_field(rte_le_to_cpu_32(req->param[0]),
|
|
HNS3_CFG_TQP_DESC_N_M,
|
|
HNS3_CFG_TQP_DESC_N_S);
|
|
|
|
cfg->phy_addr = hns3_get_field(rte_le_to_cpu_32(req->param[1]),
|
|
HNS3_CFG_PHY_ADDR_M,
|
|
HNS3_CFG_PHY_ADDR_S);
|
|
cfg->media_type = hns3_get_field(rte_le_to_cpu_32(req->param[1]),
|
|
HNS3_CFG_MEDIA_TP_M,
|
|
HNS3_CFG_MEDIA_TP_S);
|
|
cfg->rx_buf_len = hns3_get_field(rte_le_to_cpu_32(req->param[1]),
|
|
HNS3_CFG_RX_BUF_LEN_M,
|
|
HNS3_CFG_RX_BUF_LEN_S);
|
|
/* get mac address */
|
|
mac_addr_tmp = rte_le_to_cpu_32(req->param[2]);
|
|
mac_addr_tmp_high = hns3_get_field(rte_le_to_cpu_32(req->param[3]),
|
|
HNS3_CFG_MAC_ADDR_H_M,
|
|
HNS3_CFG_MAC_ADDR_H_S);
|
|
|
|
mac_addr_tmp |= (mac_addr_tmp_high << 31) << 1;
|
|
|
|
cfg->default_speed = hns3_get_field(rte_le_to_cpu_32(req->param[3]),
|
|
HNS3_CFG_DEFAULT_SPEED_M,
|
|
HNS3_CFG_DEFAULT_SPEED_S);
|
|
cfg->rss_size_max = hns3_get_field(rte_le_to_cpu_32(req->param[3]),
|
|
HNS3_CFG_RSS_SIZE_M,
|
|
HNS3_CFG_RSS_SIZE_S);
|
|
|
|
for (i = 0; i < RTE_ETHER_ADDR_LEN; i++)
|
|
cfg->mac_addr[i] = (mac_addr_tmp >> (8 * i)) & 0xff;
|
|
|
|
req = (struct hns3_cfg_param_cmd *)desc[1].data;
|
|
cfg->numa_node_map = rte_le_to_cpu_32(req->param[0]);
|
|
|
|
cfg->speed_ability = hns3_get_field(rte_le_to_cpu_32(req->param[1]),
|
|
HNS3_CFG_SPEED_ABILITY_M,
|
|
HNS3_CFG_SPEED_ABILITY_S);
|
|
cfg->umv_space = hns3_get_field(rte_le_to_cpu_32(req->param[1]),
|
|
HNS3_CFG_UMV_TBL_SPACE_M,
|
|
HNS3_CFG_UMV_TBL_SPACE_S);
|
|
if (!cfg->umv_space)
|
|
cfg->umv_space = HNS3_DEFAULT_UMV_SPACE_PER_PF;
|
|
|
|
ext_rss_size_max = hns3_get_field(rte_le_to_cpu_32(req->param[2]),
|
|
HNS3_CFG_EXT_RSS_SIZE_M,
|
|
HNS3_CFG_EXT_RSS_SIZE_S);
|
|
/*
|
|
* Field ext_rss_size_max obtained from firmware will be more flexible
|
|
* for future changes and expansions, which is an exponent of 2, instead
|
|
* of reading out directly. If this field is not zero, hns3 PF PMD
|
|
* driver uses it as rss_size_max under one TC. Device, whose revision
|
|
* id is greater than or equal to PCI_REVISION_ID_HIP09_A, obtains the
|
|
* maximum number of queues supported under a TC through this field.
|
|
*/
|
|
if (ext_rss_size_max)
|
|
cfg->rss_size_max = 1U << ext_rss_size_max;
|
|
}
|
|
|
|
/* hns3_get_board_cfg: query the static parameter from NCL_config file in flash
|
|
* @hw: pointer to struct hns3_hw
|
|
* @hcfg: the config structure to be getted
|
|
*/
|
|
static int
|
|
hns3_get_board_cfg(struct hns3_hw *hw, struct hns3_cfg *hcfg)
|
|
{
|
|
struct hns3_cmd_desc desc[HNS3_PF_CFG_DESC_NUM];
|
|
struct hns3_cfg_param_cmd *req;
|
|
uint32_t offset;
|
|
uint32_t i;
|
|
int ret;
|
|
|
|
for (i = 0; i < HNS3_PF_CFG_DESC_NUM; i++) {
|
|
offset = 0;
|
|
req = (struct hns3_cfg_param_cmd *)desc[i].data;
|
|
hns3_cmd_setup_basic_desc(&desc[i], HNS3_OPC_GET_CFG_PARAM,
|
|
true);
|
|
hns3_set_field(offset, HNS3_CFG_OFFSET_M, HNS3_CFG_OFFSET_S,
|
|
i * HNS3_CFG_RD_LEN_BYTES);
|
|
/* Len should be divided by 4 when send to hardware */
|
|
hns3_set_field(offset, HNS3_CFG_RD_LEN_M, HNS3_CFG_RD_LEN_S,
|
|
HNS3_CFG_RD_LEN_BYTES / HNS3_CFG_RD_LEN_UNIT);
|
|
req->offset = rte_cpu_to_le_32(offset);
|
|
}
|
|
|
|
ret = hns3_cmd_send(hw, desc, HNS3_PF_CFG_DESC_NUM);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "get config failed %d.", ret);
|
|
return ret;
|
|
}
|
|
|
|
hns3_parse_cfg(hcfg, desc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3_parse_speed(int speed_cmd, uint32_t *speed)
|
|
{
|
|
switch (speed_cmd) {
|
|
case HNS3_CFG_SPEED_10M:
|
|
*speed = ETH_SPEED_NUM_10M;
|
|
break;
|
|
case HNS3_CFG_SPEED_100M:
|
|
*speed = ETH_SPEED_NUM_100M;
|
|
break;
|
|
case HNS3_CFG_SPEED_1G:
|
|
*speed = ETH_SPEED_NUM_1G;
|
|
break;
|
|
case HNS3_CFG_SPEED_10G:
|
|
*speed = ETH_SPEED_NUM_10G;
|
|
break;
|
|
case HNS3_CFG_SPEED_25G:
|
|
*speed = ETH_SPEED_NUM_25G;
|
|
break;
|
|
case HNS3_CFG_SPEED_40G:
|
|
*speed = ETH_SPEED_NUM_40G;
|
|
break;
|
|
case HNS3_CFG_SPEED_50G:
|
|
*speed = ETH_SPEED_NUM_50G;
|
|
break;
|
|
case HNS3_CFG_SPEED_100G:
|
|
*speed = ETH_SPEED_NUM_100G;
|
|
break;
|
|
case HNS3_CFG_SPEED_200G:
|
|
*speed = ETH_SPEED_NUM_200G;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
hns3_set_default_dev_specifications(struct hns3_hw *hw)
|
|
{
|
|
hw->max_non_tso_bd_num = HNS3_MAX_NON_TSO_BD_PER_PKT;
|
|
hw->rss_ind_tbl_size = HNS3_RSS_IND_TBL_SIZE;
|
|
hw->rss_key_size = HNS3_RSS_KEY_SIZE;
|
|
hw->max_tm_rate = HNS3_ETHER_MAX_RATE;
|
|
hw->intr.int_ql_max = HNS3_INTR_QL_NONE;
|
|
}
|
|
|
|
static void
|
|
hns3_parse_dev_specifications(struct hns3_hw *hw, struct hns3_cmd_desc *desc)
|
|
{
|
|
struct hns3_dev_specs_0_cmd *req0;
|
|
|
|
req0 = (struct hns3_dev_specs_0_cmd *)desc[0].data;
|
|
|
|
hw->max_non_tso_bd_num = req0->max_non_tso_bd_num;
|
|
hw->rss_ind_tbl_size = rte_le_to_cpu_16(req0->rss_ind_tbl_size);
|
|
hw->rss_key_size = rte_le_to_cpu_16(req0->rss_key_size);
|
|
hw->max_tm_rate = rte_le_to_cpu_32(req0->max_tm_rate);
|
|
hw->intr.int_ql_max = rte_le_to_cpu_16(req0->intr_ql_max);
|
|
}
|
|
|
|
static int
|
|
hns3_check_dev_specifications(struct hns3_hw *hw)
|
|
{
|
|
if (hw->rss_ind_tbl_size == 0 ||
|
|
hw->rss_ind_tbl_size > HNS3_RSS_IND_TBL_SIZE_MAX) {
|
|
hns3_err(hw, "the size of hash lookup table configured (%u)"
|
|
" exceeds the maximum(%u)", hw->rss_ind_tbl_size,
|
|
HNS3_RSS_IND_TBL_SIZE_MAX);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3_query_dev_specifications(struct hns3_hw *hw)
|
|
{
|
|
struct hns3_cmd_desc desc[HNS3_QUERY_DEV_SPECS_BD_NUM];
|
|
int ret;
|
|
int i;
|
|
|
|
for (i = 0; i < HNS3_QUERY_DEV_SPECS_BD_NUM - 1; i++) {
|
|
hns3_cmd_setup_basic_desc(&desc[i], HNS3_OPC_QUERY_DEV_SPECS,
|
|
true);
|
|
desc[i].flag |= rte_cpu_to_le_16(HNS3_CMD_FLAG_NEXT);
|
|
}
|
|
hns3_cmd_setup_basic_desc(&desc[i], HNS3_OPC_QUERY_DEV_SPECS, true);
|
|
|
|
ret = hns3_cmd_send(hw, desc, HNS3_QUERY_DEV_SPECS_BD_NUM);
|
|
if (ret)
|
|
return ret;
|
|
|
|
hns3_parse_dev_specifications(hw, desc);
|
|
|
|
return hns3_check_dev_specifications(hw);
|
|
}
|
|
|
|
static int
|
|
hns3_get_capability(struct hns3_hw *hw)
|
|
{
|
|
struct hns3_adapter *hns = HNS3_DEV_HW_TO_ADAPTER(hw);
|
|
struct rte_pci_device *pci_dev;
|
|
struct hns3_pf *pf = &hns->pf;
|
|
struct rte_eth_dev *eth_dev;
|
|
uint16_t device_id;
|
|
uint8_t revision;
|
|
int ret;
|
|
|
|
eth_dev = &rte_eth_devices[hw->data->port_id];
|
|
pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
|
|
device_id = pci_dev->id.device_id;
|
|
|
|
if (device_id == HNS3_DEV_ID_25GE_RDMA ||
|
|
device_id == HNS3_DEV_ID_50GE_RDMA ||
|
|
device_id == HNS3_DEV_ID_100G_RDMA_MACSEC ||
|
|
device_id == HNS3_DEV_ID_200G_RDMA)
|
|
hns3_set_bit(hw->capability, HNS3_DEV_SUPPORT_DCB_B, 1);
|
|
|
|
/* Get PCI revision id */
|
|
ret = rte_pci_read_config(pci_dev, &revision, HNS3_PCI_REVISION_ID_LEN,
|
|
HNS3_PCI_REVISION_ID);
|
|
if (ret != HNS3_PCI_REVISION_ID_LEN) {
|
|
PMD_INIT_LOG(ERR, "failed to read pci revision id, ret = %d",
|
|
ret);
|
|
return -EIO;
|
|
}
|
|
hw->revision = revision;
|
|
|
|
if (revision < PCI_REVISION_ID_HIP09_A) {
|
|
hns3_set_default_dev_specifications(hw);
|
|
hw->intr.mapping_mode = HNS3_INTR_MAPPING_VEC_RSV_ONE;
|
|
hw->intr.gl_unit = HNS3_INTR_COALESCE_GL_UINT_2US;
|
|
hw->tso_mode = HNS3_TSO_SW_CAL_PSEUDO_H_CSUM;
|
|
hw->vlan_mode = HNS3_SW_SHIFT_AND_DISCARD_MODE;
|
|
hw->drop_stats_mode = HNS3_PKTS_DROP_STATS_MODE1;
|
|
hw->min_tx_pkt_len = HNS3_HIP08_MIN_TX_PKT_LEN;
|
|
pf->tqp_config_mode = HNS3_FIXED_MAX_TQP_NUM_MODE;
|
|
hw->rss_info.ipv6_sctp_offload_supported = false;
|
|
hw->udp_cksum_mode = HNS3_SPECIAL_PORT_SW_CKSUM_MODE;
|
|
pf->support_multi_tc_pause = false;
|
|
return 0;
|
|
}
|
|
|
|
ret = hns3_query_dev_specifications(hw);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR,
|
|
"failed to query dev specifications, ret = %d",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
hw->intr.mapping_mode = HNS3_INTR_MAPPING_VEC_ALL;
|
|
hw->intr.gl_unit = HNS3_INTR_COALESCE_GL_UINT_1US;
|
|
hw->tso_mode = HNS3_TSO_HW_CAL_PSEUDO_H_CSUM;
|
|
hw->vlan_mode = HNS3_HW_SHIFT_AND_DISCARD_MODE;
|
|
hw->drop_stats_mode = HNS3_PKTS_DROP_STATS_MODE2;
|
|
hw->min_tx_pkt_len = HNS3_HIP09_MIN_TX_PKT_LEN;
|
|
pf->tqp_config_mode = HNS3_FLEX_MAX_TQP_NUM_MODE;
|
|
hw->rss_info.ipv6_sctp_offload_supported = true;
|
|
hw->udp_cksum_mode = HNS3_SPECIAL_PORT_HW_CKSUM_MODE;
|
|
pf->support_multi_tc_pause = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3_check_media_type(struct hns3_hw *hw, uint8_t media_type)
|
|
{
|
|
int ret;
|
|
|
|
switch (media_type) {
|
|
case HNS3_MEDIA_TYPE_COPPER:
|
|
if (!hns3_dev_copper_supported(hw)) {
|
|
PMD_INIT_LOG(ERR,
|
|
"Media type is copper, not supported.");
|
|
ret = -EOPNOTSUPP;
|
|
} else {
|
|
ret = 0;
|
|
}
|
|
break;
|
|
case HNS3_MEDIA_TYPE_FIBER:
|
|
ret = 0;
|
|
break;
|
|
case HNS3_MEDIA_TYPE_BACKPLANE:
|
|
PMD_INIT_LOG(ERR, "Media type is Backplane, not supported.");
|
|
ret = -EOPNOTSUPP;
|
|
break;
|
|
default:
|
|
PMD_INIT_LOG(ERR, "Unknown media type = %u!", media_type);
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_get_board_configuration(struct hns3_hw *hw)
|
|
{
|
|
struct hns3_adapter *hns = HNS3_DEV_HW_TO_ADAPTER(hw);
|
|
struct hns3_pf *pf = &hns->pf;
|
|
struct hns3_cfg cfg;
|
|
int ret;
|
|
|
|
ret = hns3_get_board_cfg(hw, &cfg);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "get board config failed %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = hns3_check_media_type(hw, cfg.media_type);
|
|
if (ret)
|
|
return ret;
|
|
|
|
hw->mac.media_type = cfg.media_type;
|
|
hw->rss_size_max = cfg.rss_size_max;
|
|
hw->rss_dis_flag = false;
|
|
memcpy(hw->mac.mac_addr, cfg.mac_addr, RTE_ETHER_ADDR_LEN);
|
|
hw->mac.phy_addr = cfg.phy_addr;
|
|
hw->mac.default_addr_setted = false;
|
|
hw->num_tx_desc = cfg.tqp_desc_num;
|
|
hw->num_rx_desc = cfg.tqp_desc_num;
|
|
hw->dcb_info.num_pg = 1;
|
|
hw->dcb_info.hw_pfc_map = 0;
|
|
|
|
ret = hns3_parse_speed(cfg.default_speed, &hw->mac.link_speed);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "Get wrong speed %u, ret = %d",
|
|
cfg.default_speed, ret);
|
|
return ret;
|
|
}
|
|
|
|
pf->tc_max = cfg.tc_num;
|
|
if (pf->tc_max > HNS3_MAX_TC_NUM || pf->tc_max < 1) {
|
|
PMD_INIT_LOG(WARNING,
|
|
"Get TC num(%u) from flash, set TC num to 1",
|
|
pf->tc_max);
|
|
pf->tc_max = 1;
|
|
}
|
|
|
|
/* Dev does not support DCB */
|
|
if (!hns3_dev_dcb_supported(hw)) {
|
|
pf->tc_max = 1;
|
|
pf->pfc_max = 0;
|
|
} else
|
|
pf->pfc_max = pf->tc_max;
|
|
|
|
hw->dcb_info.num_tc = 1;
|
|
hw->alloc_rss_size = RTE_MIN(hw->rss_size_max,
|
|
hw->tqps_num / hw->dcb_info.num_tc);
|
|
hns3_set_bit(hw->hw_tc_map, 0, 1);
|
|
pf->tx_sch_mode = HNS3_FLAG_TC_BASE_SCH_MODE;
|
|
|
|
pf->wanted_umv_size = cfg.umv_space;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_get_configuration(struct hns3_hw *hw)
|
|
{
|
|
int ret;
|
|
|
|
ret = hns3_query_function_status(hw);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "Failed to query function status: %d.", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Get device capability */
|
|
ret = hns3_get_capability(hw);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "failed to get device capability: %d.", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Get pf resource */
|
|
ret = hns3_query_pf_resource(hw);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "Failed to query pf resource: %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = hns3_get_board_configuration(hw);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "failed to get board configuration: %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = hns3_query_dev_fec_info(hw);
|
|
if (ret)
|
|
PMD_INIT_LOG(ERR,
|
|
"failed to query FEC information, ret = %d", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_map_tqps_to_func(struct hns3_hw *hw, uint16_t func_id, uint16_t tqp_pid,
|
|
uint16_t tqp_vid, bool is_pf)
|
|
{
|
|
struct hns3_tqp_map_cmd *req;
|
|
struct hns3_cmd_desc desc;
|
|
int ret;
|
|
|
|
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_SET_TQP_MAP, false);
|
|
|
|
req = (struct hns3_tqp_map_cmd *)desc.data;
|
|
req->tqp_id = rte_cpu_to_le_16(tqp_pid);
|
|
req->tqp_vf = func_id;
|
|
req->tqp_flag = 1 << HNS3_TQP_MAP_EN_B;
|
|
if (!is_pf)
|
|
req->tqp_flag |= (1 << HNS3_TQP_MAP_TYPE_B);
|
|
req->tqp_vid = rte_cpu_to_le_16(tqp_vid);
|
|
|
|
ret = hns3_cmd_send(hw, &desc, 1);
|
|
if (ret)
|
|
PMD_INIT_LOG(ERR, "TQP map failed %d", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_map_tqp(struct hns3_hw *hw)
|
|
{
|
|
int ret;
|
|
int i;
|
|
|
|
/*
|
|
* In current version, VF is not supported when PF is driven by DPDK
|
|
* driver, so we assign total tqps_num tqps allocated to this port
|
|
* to PF.
|
|
*/
|
|
for (i = 0; i < hw->total_tqps_num; i++) {
|
|
ret = hns3_map_tqps_to_func(hw, HNS3_PF_FUNC_ID, i, i, true);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3_cfg_mac_speed_dup_hw(struct hns3_hw *hw, uint32_t speed, uint8_t duplex)
|
|
{
|
|
struct hns3_config_mac_speed_dup_cmd *req;
|
|
struct hns3_cmd_desc desc;
|
|
int ret;
|
|
|
|
req = (struct hns3_config_mac_speed_dup_cmd *)desc.data;
|
|
|
|
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_CONFIG_SPEED_DUP, false);
|
|
|
|
hns3_set_bit(req->speed_dup, HNS3_CFG_DUPLEX_B, !!duplex ? 1 : 0);
|
|
|
|
switch (speed) {
|
|
case ETH_SPEED_NUM_10M:
|
|
hns3_set_field(req->speed_dup, HNS3_CFG_SPEED_M,
|
|
HNS3_CFG_SPEED_S, HNS3_CFG_SPEED_10M);
|
|
break;
|
|
case ETH_SPEED_NUM_100M:
|
|
hns3_set_field(req->speed_dup, HNS3_CFG_SPEED_M,
|
|
HNS3_CFG_SPEED_S, HNS3_CFG_SPEED_100M);
|
|
break;
|
|
case ETH_SPEED_NUM_1G:
|
|
hns3_set_field(req->speed_dup, HNS3_CFG_SPEED_M,
|
|
HNS3_CFG_SPEED_S, HNS3_CFG_SPEED_1G);
|
|
break;
|
|
case ETH_SPEED_NUM_10G:
|
|
hns3_set_field(req->speed_dup, HNS3_CFG_SPEED_M,
|
|
HNS3_CFG_SPEED_S, HNS3_CFG_SPEED_10G);
|
|
break;
|
|
case ETH_SPEED_NUM_25G:
|
|
hns3_set_field(req->speed_dup, HNS3_CFG_SPEED_M,
|
|
HNS3_CFG_SPEED_S, HNS3_CFG_SPEED_25G);
|
|
break;
|
|
case ETH_SPEED_NUM_40G:
|
|
hns3_set_field(req->speed_dup, HNS3_CFG_SPEED_M,
|
|
HNS3_CFG_SPEED_S, HNS3_CFG_SPEED_40G);
|
|
break;
|
|
case ETH_SPEED_NUM_50G:
|
|
hns3_set_field(req->speed_dup, HNS3_CFG_SPEED_M,
|
|
HNS3_CFG_SPEED_S, HNS3_CFG_SPEED_50G);
|
|
break;
|
|
case ETH_SPEED_NUM_100G:
|
|
hns3_set_field(req->speed_dup, HNS3_CFG_SPEED_M,
|
|
HNS3_CFG_SPEED_S, HNS3_CFG_SPEED_100G);
|
|
break;
|
|
case ETH_SPEED_NUM_200G:
|
|
hns3_set_field(req->speed_dup, HNS3_CFG_SPEED_M,
|
|
HNS3_CFG_SPEED_S, HNS3_CFG_SPEED_200G);
|
|
break;
|
|
default:
|
|
PMD_INIT_LOG(ERR, "invalid speed (%u)", speed);
|
|
return -EINVAL;
|
|
}
|
|
|
|
hns3_set_bit(req->mac_change_fec_en, HNS3_CFG_MAC_SPEED_CHANGE_EN_B, 1);
|
|
|
|
ret = hns3_cmd_send(hw, &desc, 1);
|
|
if (ret)
|
|
PMD_INIT_LOG(ERR, "mac speed/duplex config cmd failed %d", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_tx_buffer_calc(struct hns3_hw *hw, struct hns3_pkt_buf_alloc *buf_alloc)
|
|
{
|
|
struct hns3_adapter *hns = HNS3_DEV_HW_TO_ADAPTER(hw);
|
|
struct hns3_pf *pf = &hns->pf;
|
|
struct hns3_priv_buf *priv;
|
|
uint32_t i, total_size;
|
|
|
|
total_size = pf->pkt_buf_size;
|
|
|
|
/* alloc tx buffer for all enabled tc */
|
|
for (i = 0; i < HNS3_MAX_TC_NUM; i++) {
|
|
priv = &buf_alloc->priv_buf[i];
|
|
|
|
if (hw->hw_tc_map & BIT(i)) {
|
|
if (total_size < pf->tx_buf_size)
|
|
return -ENOMEM;
|
|
|
|
priv->tx_buf_size = pf->tx_buf_size;
|
|
} else
|
|
priv->tx_buf_size = 0;
|
|
|
|
total_size -= priv->tx_buf_size;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3_tx_buffer_alloc(struct hns3_hw *hw, struct hns3_pkt_buf_alloc *buf_alloc)
|
|
{
|
|
/* TX buffer size is unit by 128 byte */
|
|
#define HNS3_BUF_SIZE_UNIT_SHIFT 7
|
|
#define HNS3_BUF_SIZE_UPDATE_EN_MSK BIT(15)
|
|
struct hns3_tx_buff_alloc_cmd *req;
|
|
struct hns3_cmd_desc desc;
|
|
uint32_t buf_size;
|
|
uint32_t i;
|
|
int ret;
|
|
|
|
req = (struct hns3_tx_buff_alloc_cmd *)desc.data;
|
|
|
|
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_TX_BUFF_ALLOC, 0);
|
|
for (i = 0; i < HNS3_MAX_TC_NUM; i++) {
|
|
buf_size = buf_alloc->priv_buf[i].tx_buf_size;
|
|
|
|
buf_size = buf_size >> HNS3_BUF_SIZE_UNIT_SHIFT;
|
|
req->tx_pkt_buff[i] = rte_cpu_to_le_16(buf_size |
|
|
HNS3_BUF_SIZE_UPDATE_EN_MSK);
|
|
}
|
|
|
|
ret = hns3_cmd_send(hw, &desc, 1);
|
|
if (ret)
|
|
PMD_INIT_LOG(ERR, "tx buffer alloc cmd failed %d", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_get_tc_num(struct hns3_hw *hw)
|
|
{
|
|
int cnt = 0;
|
|
uint8_t i;
|
|
|
|
for (i = 0; i < HNS3_MAX_TC_NUM; i++)
|
|
if (hw->hw_tc_map & BIT(i))
|
|
cnt++;
|
|
return cnt;
|
|
}
|
|
|
|
static uint32_t
|
|
hns3_get_rx_priv_buff_alloced(struct hns3_pkt_buf_alloc *buf_alloc)
|
|
{
|
|
struct hns3_priv_buf *priv;
|
|
uint32_t rx_priv = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < HNS3_MAX_TC_NUM; i++) {
|
|
priv = &buf_alloc->priv_buf[i];
|
|
if (priv->enable)
|
|
rx_priv += priv->buf_size;
|
|
}
|
|
return rx_priv;
|
|
}
|
|
|
|
static uint32_t
|
|
hns3_get_tx_buff_alloced(struct hns3_pkt_buf_alloc *buf_alloc)
|
|
{
|
|
uint32_t total_tx_size = 0;
|
|
uint32_t i;
|
|
|
|
for (i = 0; i < HNS3_MAX_TC_NUM; i++)
|
|
total_tx_size += buf_alloc->priv_buf[i].tx_buf_size;
|
|
|
|
return total_tx_size;
|
|
}
|
|
|
|
/* Get the number of pfc enabled TCs, which have private buffer */
|
|
static int
|
|
hns3_get_pfc_priv_num(struct hns3_hw *hw, struct hns3_pkt_buf_alloc *buf_alloc)
|
|
{
|
|
struct hns3_priv_buf *priv;
|
|
int cnt = 0;
|
|
uint8_t i;
|
|
|
|
for (i = 0; i < HNS3_MAX_TC_NUM; i++) {
|
|
priv = &buf_alloc->priv_buf[i];
|
|
if ((hw->dcb_info.hw_pfc_map & BIT(i)) && priv->enable)
|
|
cnt++;
|
|
}
|
|
|
|
return cnt;
|
|
}
|
|
|
|
/* Get the number of pfc disabled TCs, which have private buffer */
|
|
static int
|
|
hns3_get_no_pfc_priv_num(struct hns3_hw *hw,
|
|
struct hns3_pkt_buf_alloc *buf_alloc)
|
|
{
|
|
struct hns3_priv_buf *priv;
|
|
int cnt = 0;
|
|
uint8_t i;
|
|
|
|
for (i = 0; i < HNS3_MAX_TC_NUM; i++) {
|
|
priv = &buf_alloc->priv_buf[i];
|
|
if (hw->hw_tc_map & BIT(i) &&
|
|
!(hw->dcb_info.hw_pfc_map & BIT(i)) && priv->enable)
|
|
cnt++;
|
|
}
|
|
|
|
return cnt;
|
|
}
|
|
|
|
static bool
|
|
hns3_is_rx_buf_ok(struct hns3_hw *hw, struct hns3_pkt_buf_alloc *buf_alloc,
|
|
uint32_t rx_all)
|
|
{
|
|
uint32_t shared_buf_min, shared_buf_tc, shared_std, hi_thrd, lo_thrd;
|
|
struct hns3_adapter *hns = HNS3_DEV_HW_TO_ADAPTER(hw);
|
|
struct hns3_pf *pf = &hns->pf;
|
|
uint32_t shared_buf, aligned_mps;
|
|
uint32_t rx_priv;
|
|
uint8_t tc_num;
|
|
uint8_t i;
|
|
|
|
tc_num = hns3_get_tc_num(hw);
|
|
aligned_mps = roundup(pf->mps, HNS3_BUF_SIZE_UNIT);
|
|
|
|
if (hns3_dev_dcb_supported(hw))
|
|
shared_buf_min = HNS3_BUF_MUL_BY * aligned_mps +
|
|
pf->dv_buf_size;
|
|
else
|
|
shared_buf_min = aligned_mps + HNS3_NON_DCB_ADDITIONAL_BUF
|
|
+ pf->dv_buf_size;
|
|
|
|
shared_buf_tc = tc_num * aligned_mps + aligned_mps;
|
|
shared_std = roundup(RTE_MAX(shared_buf_min, shared_buf_tc),
|
|
HNS3_BUF_SIZE_UNIT);
|
|
|
|
rx_priv = hns3_get_rx_priv_buff_alloced(buf_alloc);
|
|
if (rx_all < rx_priv + shared_std)
|
|
return false;
|
|
|
|
shared_buf = rounddown(rx_all - rx_priv, HNS3_BUF_SIZE_UNIT);
|
|
buf_alloc->s_buf.buf_size = shared_buf;
|
|
if (hns3_dev_dcb_supported(hw)) {
|
|
buf_alloc->s_buf.self.high = shared_buf - pf->dv_buf_size;
|
|
buf_alloc->s_buf.self.low = buf_alloc->s_buf.self.high
|
|
- roundup(aligned_mps / HNS3_BUF_DIV_BY,
|
|
HNS3_BUF_SIZE_UNIT);
|
|
} else {
|
|
buf_alloc->s_buf.self.high =
|
|
aligned_mps + HNS3_NON_DCB_ADDITIONAL_BUF;
|
|
buf_alloc->s_buf.self.low = aligned_mps;
|
|
}
|
|
|
|
if (hns3_dev_dcb_supported(hw)) {
|
|
hi_thrd = shared_buf - pf->dv_buf_size;
|
|
|
|
if (tc_num <= NEED_RESERVE_TC_NUM)
|
|
hi_thrd = hi_thrd * BUF_RESERVE_PERCENT /
|
|
BUF_MAX_PERCENT;
|
|
|
|
if (tc_num)
|
|
hi_thrd = hi_thrd / tc_num;
|
|
|
|
hi_thrd = RTE_MAX(hi_thrd, HNS3_BUF_MUL_BY * aligned_mps);
|
|
hi_thrd = rounddown(hi_thrd, HNS3_BUF_SIZE_UNIT);
|
|
lo_thrd = hi_thrd - aligned_mps / HNS3_BUF_DIV_BY;
|
|
} else {
|
|
hi_thrd = aligned_mps + HNS3_NON_DCB_ADDITIONAL_BUF;
|
|
lo_thrd = aligned_mps;
|
|
}
|
|
|
|
for (i = 0; i < HNS3_MAX_TC_NUM; i++) {
|
|
buf_alloc->s_buf.tc_thrd[i].low = lo_thrd;
|
|
buf_alloc->s_buf.tc_thrd[i].high = hi_thrd;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static bool
|
|
hns3_rx_buf_calc_all(struct hns3_hw *hw, bool max,
|
|
struct hns3_pkt_buf_alloc *buf_alloc)
|
|
{
|
|
struct hns3_adapter *hns = HNS3_DEV_HW_TO_ADAPTER(hw);
|
|
struct hns3_pf *pf = &hns->pf;
|
|
struct hns3_priv_buf *priv;
|
|
uint32_t aligned_mps;
|
|
uint32_t rx_all;
|
|
uint8_t i;
|
|
|
|
rx_all = pf->pkt_buf_size - hns3_get_tx_buff_alloced(buf_alloc);
|
|
aligned_mps = roundup(pf->mps, HNS3_BUF_SIZE_UNIT);
|
|
|
|
for (i = 0; i < HNS3_MAX_TC_NUM; i++) {
|
|
priv = &buf_alloc->priv_buf[i];
|
|
|
|
priv->enable = 0;
|
|
priv->wl.low = 0;
|
|
priv->wl.high = 0;
|
|
priv->buf_size = 0;
|
|
|
|
if (!(hw->hw_tc_map & BIT(i)))
|
|
continue;
|
|
|
|
priv->enable = 1;
|
|
if (hw->dcb_info.hw_pfc_map & BIT(i)) {
|
|
priv->wl.low = max ? aligned_mps : HNS3_BUF_SIZE_UNIT;
|
|
priv->wl.high = roundup(priv->wl.low + aligned_mps,
|
|
HNS3_BUF_SIZE_UNIT);
|
|
} else {
|
|
priv->wl.low = 0;
|
|
priv->wl.high = max ? (aligned_mps * HNS3_BUF_MUL_BY) :
|
|
aligned_mps;
|
|
}
|
|
|
|
priv->buf_size = priv->wl.high + pf->dv_buf_size;
|
|
}
|
|
|
|
return hns3_is_rx_buf_ok(hw, buf_alloc, rx_all);
|
|
}
|
|
|
|
static bool
|
|
hns3_drop_nopfc_buf_till_fit(struct hns3_hw *hw,
|
|
struct hns3_pkt_buf_alloc *buf_alloc)
|
|
{
|
|
struct hns3_adapter *hns = HNS3_DEV_HW_TO_ADAPTER(hw);
|
|
struct hns3_pf *pf = &hns->pf;
|
|
struct hns3_priv_buf *priv;
|
|
int no_pfc_priv_num;
|
|
uint32_t rx_all;
|
|
uint8_t mask;
|
|
int i;
|
|
|
|
rx_all = pf->pkt_buf_size - hns3_get_tx_buff_alloced(buf_alloc);
|
|
no_pfc_priv_num = hns3_get_no_pfc_priv_num(hw, buf_alloc);
|
|
|
|
/* let the last to be cleared first */
|
|
for (i = HNS3_MAX_TC_NUM - 1; i >= 0; i--) {
|
|
priv = &buf_alloc->priv_buf[i];
|
|
mask = BIT((uint8_t)i);
|
|
if (hw->hw_tc_map & mask &&
|
|
!(hw->dcb_info.hw_pfc_map & mask)) {
|
|
/* Clear the no pfc TC private buffer */
|
|
priv->wl.low = 0;
|
|
priv->wl.high = 0;
|
|
priv->buf_size = 0;
|
|
priv->enable = 0;
|
|
no_pfc_priv_num--;
|
|
}
|
|
|
|
if (hns3_is_rx_buf_ok(hw, buf_alloc, rx_all) ||
|
|
no_pfc_priv_num == 0)
|
|
break;
|
|
}
|
|
|
|
return hns3_is_rx_buf_ok(hw, buf_alloc, rx_all);
|
|
}
|
|
|
|
static bool
|
|
hns3_drop_pfc_buf_till_fit(struct hns3_hw *hw,
|
|
struct hns3_pkt_buf_alloc *buf_alloc)
|
|
{
|
|
struct hns3_adapter *hns = HNS3_DEV_HW_TO_ADAPTER(hw);
|
|
struct hns3_pf *pf = &hns->pf;
|
|
struct hns3_priv_buf *priv;
|
|
uint32_t rx_all;
|
|
int pfc_priv_num;
|
|
uint8_t mask;
|
|
int i;
|
|
|
|
rx_all = pf->pkt_buf_size - hns3_get_tx_buff_alloced(buf_alloc);
|
|
pfc_priv_num = hns3_get_pfc_priv_num(hw, buf_alloc);
|
|
|
|
/* let the last to be cleared first */
|
|
for (i = HNS3_MAX_TC_NUM - 1; i >= 0; i--) {
|
|
priv = &buf_alloc->priv_buf[i];
|
|
mask = BIT((uint8_t)i);
|
|
if (hw->hw_tc_map & mask && hw->dcb_info.hw_pfc_map & mask) {
|
|
/* Reduce the number of pfc TC with private buffer */
|
|
priv->wl.low = 0;
|
|
priv->enable = 0;
|
|
priv->wl.high = 0;
|
|
priv->buf_size = 0;
|
|
pfc_priv_num--;
|
|
}
|
|
if (hns3_is_rx_buf_ok(hw, buf_alloc, rx_all) ||
|
|
pfc_priv_num == 0)
|
|
break;
|
|
}
|
|
|
|
return hns3_is_rx_buf_ok(hw, buf_alloc, rx_all);
|
|
}
|
|
|
|
static bool
|
|
hns3_only_alloc_priv_buff(struct hns3_hw *hw,
|
|
struct hns3_pkt_buf_alloc *buf_alloc)
|
|
{
|
|
#define COMPENSATE_BUFFER 0x3C00
|
|
#define COMPENSATE_HALF_MPS_NUM 5
|
|
#define PRIV_WL_GAP 0x1800
|
|
struct hns3_adapter *hns = HNS3_DEV_HW_TO_ADAPTER(hw);
|
|
struct hns3_pf *pf = &hns->pf;
|
|
uint32_t tc_num = hns3_get_tc_num(hw);
|
|
uint32_t half_mps = pf->mps >> 1;
|
|
struct hns3_priv_buf *priv;
|
|
uint32_t min_rx_priv;
|
|
uint32_t rx_priv;
|
|
uint8_t i;
|
|
|
|
rx_priv = pf->pkt_buf_size - hns3_get_tx_buff_alloced(buf_alloc);
|
|
if (tc_num)
|
|
rx_priv = rx_priv / tc_num;
|
|
|
|
if (tc_num <= NEED_RESERVE_TC_NUM)
|
|
rx_priv = rx_priv * BUF_RESERVE_PERCENT / BUF_MAX_PERCENT;
|
|
|
|
/*
|
|
* Minimum value of private buffer in rx direction (min_rx_priv) is
|
|
* equal to "DV + 2.5 * MPS + 15KB". Driver only allocates rx private
|
|
* buffer if rx_priv is greater than min_rx_priv.
|
|
*/
|
|
min_rx_priv = pf->dv_buf_size + COMPENSATE_BUFFER +
|
|
COMPENSATE_HALF_MPS_NUM * half_mps;
|
|
min_rx_priv = roundup(min_rx_priv, HNS3_BUF_SIZE_UNIT);
|
|
rx_priv = rounddown(rx_priv, HNS3_BUF_SIZE_UNIT);
|
|
if (rx_priv < min_rx_priv)
|
|
return false;
|
|
|
|
for (i = 0; i < HNS3_MAX_TC_NUM; i++) {
|
|
priv = &buf_alloc->priv_buf[i];
|
|
priv->enable = 0;
|
|
priv->wl.low = 0;
|
|
priv->wl.high = 0;
|
|
priv->buf_size = 0;
|
|
|
|
if (!(hw->hw_tc_map & BIT(i)))
|
|
continue;
|
|
|
|
priv->enable = 1;
|
|
priv->buf_size = rx_priv;
|
|
priv->wl.high = rx_priv - pf->dv_buf_size;
|
|
priv->wl.low = priv->wl.high - PRIV_WL_GAP;
|
|
}
|
|
|
|
buf_alloc->s_buf.buf_size = 0;
|
|
|
|
return true;
|
|
}
|
|
|
|
/*
|
|
* hns3_rx_buffer_calc: calculate the rx private buffer size for all TCs
|
|
* @hw: pointer to struct hns3_hw
|
|
* @buf_alloc: pointer to buffer calculation data
|
|
* @return: 0: calculate sucessful, negative: fail
|
|
*/
|
|
static int
|
|
hns3_rx_buffer_calc(struct hns3_hw *hw, struct hns3_pkt_buf_alloc *buf_alloc)
|
|
{
|
|
/* When DCB is not supported, rx private buffer is not allocated. */
|
|
if (!hns3_dev_dcb_supported(hw)) {
|
|
struct hns3_adapter *hns = HNS3_DEV_HW_TO_ADAPTER(hw);
|
|
struct hns3_pf *pf = &hns->pf;
|
|
uint32_t rx_all = pf->pkt_buf_size;
|
|
|
|
rx_all -= hns3_get_tx_buff_alloced(buf_alloc);
|
|
if (!hns3_is_rx_buf_ok(hw, buf_alloc, rx_all))
|
|
return -ENOMEM;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Try to allocate privated packet buffer for all TCs without share
|
|
* buffer.
|
|
*/
|
|
if (hns3_only_alloc_priv_buff(hw, buf_alloc))
|
|
return 0;
|
|
|
|
/*
|
|
* Try to allocate privated packet buffer for all TCs with share
|
|
* buffer.
|
|
*/
|
|
if (hns3_rx_buf_calc_all(hw, true, buf_alloc))
|
|
return 0;
|
|
|
|
/*
|
|
* For different application scenes, the enabled port number, TC number
|
|
* and no_drop TC number are different. In order to obtain the better
|
|
* performance, software could allocate the buffer size and configure
|
|
* the waterline by trying to decrease the private buffer size according
|
|
* to the order, namely, waterline of valid tc, pfc disabled tc, pfc
|
|
* enabled tc.
|
|
*/
|
|
if (hns3_rx_buf_calc_all(hw, false, buf_alloc))
|
|
return 0;
|
|
|
|
if (hns3_drop_nopfc_buf_till_fit(hw, buf_alloc))
|
|
return 0;
|
|
|
|
if (hns3_drop_pfc_buf_till_fit(hw, buf_alloc))
|
|
return 0;
|
|
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static int
|
|
hns3_rx_priv_buf_alloc(struct hns3_hw *hw, struct hns3_pkt_buf_alloc *buf_alloc)
|
|
{
|
|
struct hns3_rx_priv_buff_cmd *req;
|
|
struct hns3_cmd_desc desc;
|
|
uint32_t buf_size;
|
|
int ret;
|
|
int i;
|
|
|
|
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_RX_PRIV_BUFF_ALLOC, false);
|
|
req = (struct hns3_rx_priv_buff_cmd *)desc.data;
|
|
|
|
/* Alloc private buffer TCs */
|
|
for (i = 0; i < HNS3_MAX_TC_NUM; i++) {
|
|
struct hns3_priv_buf *priv = &buf_alloc->priv_buf[i];
|
|
|
|
req->buf_num[i] =
|
|
rte_cpu_to_le_16(priv->buf_size >> HNS3_BUF_UNIT_S);
|
|
req->buf_num[i] |= rte_cpu_to_le_16(1 << HNS3_TC0_PRI_BUF_EN_B);
|
|
}
|
|
|
|
buf_size = buf_alloc->s_buf.buf_size;
|
|
req->shared_buf = rte_cpu_to_le_16((buf_size >> HNS3_BUF_UNIT_S) |
|
|
(1 << HNS3_TC0_PRI_BUF_EN_B));
|
|
|
|
ret = hns3_cmd_send(hw, &desc, 1);
|
|
if (ret)
|
|
PMD_INIT_LOG(ERR, "rx private buffer alloc cmd failed %d", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_rx_priv_wl_config(struct hns3_hw *hw, struct hns3_pkt_buf_alloc *buf_alloc)
|
|
{
|
|
#define HNS3_RX_PRIV_WL_ALLOC_DESC_NUM 2
|
|
struct hns3_rx_priv_wl_buf *req;
|
|
struct hns3_priv_buf *priv;
|
|
struct hns3_cmd_desc desc[HNS3_RX_PRIV_WL_ALLOC_DESC_NUM];
|
|
int i, j;
|
|
int ret;
|
|
|
|
for (i = 0; i < HNS3_RX_PRIV_WL_ALLOC_DESC_NUM; i++) {
|
|
hns3_cmd_setup_basic_desc(&desc[i], HNS3_OPC_RX_PRIV_WL_ALLOC,
|
|
false);
|
|
req = (struct hns3_rx_priv_wl_buf *)desc[i].data;
|
|
|
|
/* The first descriptor set the NEXT bit to 1 */
|
|
if (i == 0)
|
|
desc[i].flag |= rte_cpu_to_le_16(HNS3_CMD_FLAG_NEXT);
|
|
else
|
|
desc[i].flag &= ~rte_cpu_to_le_16(HNS3_CMD_FLAG_NEXT);
|
|
|
|
for (j = 0; j < HNS3_TC_NUM_ONE_DESC; j++) {
|
|
uint32_t idx = i * HNS3_TC_NUM_ONE_DESC + j;
|
|
|
|
priv = &buf_alloc->priv_buf[idx];
|
|
req->tc_wl[j].high = rte_cpu_to_le_16(priv->wl.high >>
|
|
HNS3_BUF_UNIT_S);
|
|
req->tc_wl[j].high |=
|
|
rte_cpu_to_le_16(BIT(HNS3_RX_PRIV_EN_B));
|
|
req->tc_wl[j].low = rte_cpu_to_le_16(priv->wl.low >>
|
|
HNS3_BUF_UNIT_S);
|
|
req->tc_wl[j].low |=
|
|
rte_cpu_to_le_16(BIT(HNS3_RX_PRIV_EN_B));
|
|
}
|
|
}
|
|
|
|
/* Send 2 descriptor at one time */
|
|
ret = hns3_cmd_send(hw, desc, HNS3_RX_PRIV_WL_ALLOC_DESC_NUM);
|
|
if (ret)
|
|
PMD_INIT_LOG(ERR, "rx private waterline config cmd failed %d",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_common_thrd_config(struct hns3_hw *hw,
|
|
struct hns3_pkt_buf_alloc *buf_alloc)
|
|
{
|
|
#define HNS3_RX_COM_THRD_ALLOC_DESC_NUM 2
|
|
struct hns3_shared_buf *s_buf = &buf_alloc->s_buf;
|
|
struct hns3_rx_com_thrd *req;
|
|
struct hns3_cmd_desc desc[HNS3_RX_COM_THRD_ALLOC_DESC_NUM];
|
|
struct hns3_tc_thrd *tc;
|
|
int tc_idx;
|
|
int i, j;
|
|
int ret;
|
|
|
|
for (i = 0; i < HNS3_RX_COM_THRD_ALLOC_DESC_NUM; i++) {
|
|
hns3_cmd_setup_basic_desc(&desc[i], HNS3_OPC_RX_COM_THRD_ALLOC,
|
|
false);
|
|
req = (struct hns3_rx_com_thrd *)&desc[i].data;
|
|
|
|
/* The first descriptor set the NEXT bit to 1 */
|
|
if (i == 0)
|
|
desc[i].flag |= rte_cpu_to_le_16(HNS3_CMD_FLAG_NEXT);
|
|
else
|
|
desc[i].flag &= ~rte_cpu_to_le_16(HNS3_CMD_FLAG_NEXT);
|
|
|
|
for (j = 0; j < HNS3_TC_NUM_ONE_DESC; j++) {
|
|
tc_idx = i * HNS3_TC_NUM_ONE_DESC + j;
|
|
tc = &s_buf->tc_thrd[tc_idx];
|
|
|
|
req->com_thrd[j].high =
|
|
rte_cpu_to_le_16(tc->high >> HNS3_BUF_UNIT_S);
|
|
req->com_thrd[j].high |=
|
|
rte_cpu_to_le_16(BIT(HNS3_RX_PRIV_EN_B));
|
|
req->com_thrd[j].low =
|
|
rte_cpu_to_le_16(tc->low >> HNS3_BUF_UNIT_S);
|
|
req->com_thrd[j].low |=
|
|
rte_cpu_to_le_16(BIT(HNS3_RX_PRIV_EN_B));
|
|
}
|
|
}
|
|
|
|
/* Send 2 descriptors at one time */
|
|
ret = hns3_cmd_send(hw, desc, HNS3_RX_COM_THRD_ALLOC_DESC_NUM);
|
|
if (ret)
|
|
PMD_INIT_LOG(ERR, "common threshold config cmd failed %d", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_common_wl_config(struct hns3_hw *hw, struct hns3_pkt_buf_alloc *buf_alloc)
|
|
{
|
|
struct hns3_shared_buf *buf = &buf_alloc->s_buf;
|
|
struct hns3_rx_com_wl *req;
|
|
struct hns3_cmd_desc desc;
|
|
int ret;
|
|
|
|
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_RX_COM_WL_ALLOC, false);
|
|
|
|
req = (struct hns3_rx_com_wl *)desc.data;
|
|
req->com_wl.high = rte_cpu_to_le_16(buf->self.high >> HNS3_BUF_UNIT_S);
|
|
req->com_wl.high |= rte_cpu_to_le_16(BIT(HNS3_RX_PRIV_EN_B));
|
|
|
|
req->com_wl.low = rte_cpu_to_le_16(buf->self.low >> HNS3_BUF_UNIT_S);
|
|
req->com_wl.low |= rte_cpu_to_le_16(BIT(HNS3_RX_PRIV_EN_B));
|
|
|
|
ret = hns3_cmd_send(hw, &desc, 1);
|
|
if (ret)
|
|
PMD_INIT_LOG(ERR, "common waterline config cmd failed %d", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int
|
|
hns3_buffer_alloc(struct hns3_hw *hw)
|
|
{
|
|
struct hns3_pkt_buf_alloc pkt_buf;
|
|
int ret;
|
|
|
|
memset(&pkt_buf, 0, sizeof(pkt_buf));
|
|
ret = hns3_tx_buffer_calc(hw, &pkt_buf);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR,
|
|
"could not calc tx buffer size for all TCs %d",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = hns3_tx_buffer_alloc(hw, &pkt_buf);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "could not alloc tx buffers %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = hns3_rx_buffer_calc(hw, &pkt_buf);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR,
|
|
"could not calc rx priv buffer size for all TCs %d",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = hns3_rx_priv_buf_alloc(hw, &pkt_buf);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "could not alloc rx priv buffer %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (hns3_dev_dcb_supported(hw)) {
|
|
ret = hns3_rx_priv_wl_config(hw, &pkt_buf);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR,
|
|
"could not configure rx private waterline %d",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = hns3_common_thrd_config(hw, &pkt_buf);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR,
|
|
"could not configure common threshold %d",
|
|
ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
ret = hns3_common_wl_config(hw, &pkt_buf);
|
|
if (ret)
|
|
PMD_INIT_LOG(ERR, "could not configure common waterline %d",
|
|
ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_mac_init(struct hns3_hw *hw)
|
|
{
|
|
struct hns3_adapter *hns = HNS3_DEV_HW_TO_ADAPTER(hw);
|
|
struct hns3_mac *mac = &hw->mac;
|
|
struct hns3_pf *pf = &hns->pf;
|
|
int ret;
|
|
|
|
pf->support_sfp_query = true;
|
|
mac->link_duplex = ETH_LINK_FULL_DUPLEX;
|
|
ret = hns3_cfg_mac_speed_dup_hw(hw, mac->link_speed, mac->link_duplex);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "Config mac speed dup fail ret = %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
mac->link_status = ETH_LINK_DOWN;
|
|
|
|
return hns3_config_mtu(hw, pf->mps);
|
|
}
|
|
|
|
static int
|
|
hns3_get_mac_ethertype_cmd_status(uint16_t cmdq_resp, uint8_t resp_code)
|
|
{
|
|
#define HNS3_ETHERTYPE_SUCCESS_ADD 0
|
|
#define HNS3_ETHERTYPE_ALREADY_ADD 1
|
|
#define HNS3_ETHERTYPE_MGR_TBL_OVERFLOW 2
|
|
#define HNS3_ETHERTYPE_KEY_CONFLICT 3
|
|
int return_status;
|
|
|
|
if (cmdq_resp) {
|
|
PMD_INIT_LOG(ERR,
|
|
"cmdq execute failed for get_mac_ethertype_cmd_status, status=%u.\n",
|
|
cmdq_resp);
|
|
return -EIO;
|
|
}
|
|
|
|
switch (resp_code) {
|
|
case HNS3_ETHERTYPE_SUCCESS_ADD:
|
|
case HNS3_ETHERTYPE_ALREADY_ADD:
|
|
return_status = 0;
|
|
break;
|
|
case HNS3_ETHERTYPE_MGR_TBL_OVERFLOW:
|
|
PMD_INIT_LOG(ERR,
|
|
"add mac ethertype failed for manager table overflow.");
|
|
return_status = -EIO;
|
|
break;
|
|
case HNS3_ETHERTYPE_KEY_CONFLICT:
|
|
PMD_INIT_LOG(ERR, "add mac ethertype failed for key conflict.");
|
|
return_status = -EIO;
|
|
break;
|
|
default:
|
|
PMD_INIT_LOG(ERR,
|
|
"add mac ethertype failed for undefined, code=%u.",
|
|
resp_code);
|
|
return_status = -EIO;
|
|
break;
|
|
}
|
|
|
|
return return_status;
|
|
}
|
|
|
|
static int
|
|
hns3_add_mgr_tbl(struct hns3_hw *hw,
|
|
const struct hns3_mac_mgr_tbl_entry_cmd *req)
|
|
{
|
|
struct hns3_cmd_desc desc;
|
|
uint8_t resp_code;
|
|
uint16_t retval;
|
|
int ret;
|
|
|
|
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_MAC_ETHTYPE_ADD, false);
|
|
memcpy(desc.data, req, sizeof(struct hns3_mac_mgr_tbl_entry_cmd));
|
|
|
|
ret = hns3_cmd_send(hw, &desc, 1);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR,
|
|
"add mac ethertype failed for cmd_send, ret =%d.",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
resp_code = (rte_le_to_cpu_32(desc.data[0]) >> 8) & 0xff;
|
|
retval = rte_le_to_cpu_16(desc.retval);
|
|
|
|
return hns3_get_mac_ethertype_cmd_status(retval, resp_code);
|
|
}
|
|
|
|
static void
|
|
hns3_prepare_mgr_tbl(struct hns3_mac_mgr_tbl_entry_cmd *mgr_table,
|
|
int *table_item_num)
|
|
{
|
|
struct hns3_mac_mgr_tbl_entry_cmd *tbl;
|
|
|
|
/*
|
|
* In current version, we add one item in management table as below:
|
|
* 0x0180C200000E -- LLDP MC address
|
|
*/
|
|
tbl = mgr_table;
|
|
tbl->flags = HNS3_MAC_MGR_MASK_VLAN_B;
|
|
tbl->ethter_type = rte_cpu_to_le_16(HNS3_MAC_ETHERTYPE_LLDP);
|
|
tbl->mac_addr_hi32 = rte_cpu_to_le_32(htonl(0x0180C200));
|
|
tbl->mac_addr_lo16 = rte_cpu_to_le_16(htons(0x000E));
|
|
tbl->i_port_bitmap = 0x1;
|
|
*table_item_num = 1;
|
|
}
|
|
|
|
static int
|
|
hns3_init_mgr_tbl(struct hns3_hw *hw)
|
|
{
|
|
#define HNS_MAC_MGR_TBL_MAX_SIZE 16
|
|
struct hns3_mac_mgr_tbl_entry_cmd mgr_table[HNS_MAC_MGR_TBL_MAX_SIZE];
|
|
int table_item_num;
|
|
int ret;
|
|
int i;
|
|
|
|
memset(mgr_table, 0, sizeof(mgr_table));
|
|
hns3_prepare_mgr_tbl(mgr_table, &table_item_num);
|
|
for (i = 0; i < table_item_num; i++) {
|
|
ret = hns3_add_mgr_tbl(hw, &mgr_table[i]);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "add mac ethertype failed, ret =%d",
|
|
ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
hns3_promisc_param_init(struct hns3_promisc_param *param, bool en_uc,
|
|
bool en_mc, bool en_bc, int vport_id)
|
|
{
|
|
if (!param)
|
|
return;
|
|
|
|
memset(param, 0, sizeof(struct hns3_promisc_param));
|
|
if (en_uc)
|
|
param->enable = HNS3_PROMISC_EN_UC;
|
|
if (en_mc)
|
|
param->enable |= HNS3_PROMISC_EN_MC;
|
|
if (en_bc)
|
|
param->enable |= HNS3_PROMISC_EN_BC;
|
|
param->vf_id = vport_id;
|
|
}
|
|
|
|
static int
|
|
hns3_cmd_set_promisc_mode(struct hns3_hw *hw, struct hns3_promisc_param *param)
|
|
{
|
|
struct hns3_promisc_cfg_cmd *req;
|
|
struct hns3_cmd_desc desc;
|
|
int ret;
|
|
|
|
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_CFG_PROMISC_MODE, false);
|
|
|
|
req = (struct hns3_promisc_cfg_cmd *)desc.data;
|
|
req->vf_id = param->vf_id;
|
|
req->flag = (param->enable << HNS3_PROMISC_EN_B) |
|
|
HNS3_PROMISC_TX_EN_B | HNS3_PROMISC_RX_EN_B;
|
|
|
|
ret = hns3_cmd_send(hw, &desc, 1);
|
|
if (ret)
|
|
PMD_INIT_LOG(ERR, "Set promisc mode fail, ret = %d", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_set_promisc_mode(struct hns3_hw *hw, bool en_uc_pmc, bool en_mc_pmc)
|
|
{
|
|
struct hns3_promisc_param param;
|
|
bool en_bc_pmc = true;
|
|
uint8_t vf_id;
|
|
|
|
/*
|
|
* In current version VF is not supported when PF is driven by DPDK
|
|
* driver, just need to configure parameters for PF vport.
|
|
*/
|
|
vf_id = HNS3_PF_FUNC_ID;
|
|
|
|
hns3_promisc_param_init(¶m, en_uc_pmc, en_mc_pmc, en_bc_pmc, vf_id);
|
|
return hns3_cmd_set_promisc_mode(hw, ¶m);
|
|
}
|
|
|
|
static int
|
|
hns3_promisc_init(struct hns3_hw *hw)
|
|
{
|
|
struct hns3_adapter *hns = HNS3_DEV_HW_TO_ADAPTER(hw);
|
|
struct hns3_pf *pf = &hns->pf;
|
|
struct hns3_promisc_param param;
|
|
uint16_t func_id;
|
|
int ret;
|
|
|
|
ret = hns3_set_promisc_mode(hw, false, false);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "failed to set promisc mode, ret = %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* In current version VFs are not supported when PF is driven by DPDK
|
|
* driver. After PF has been taken over by DPDK, the original VF will
|
|
* be invalid. So, there is a possibility of entry residues. It should
|
|
* clear VFs's promisc mode to avoid unnecessary bandwidth usage
|
|
* during init.
|
|
*/
|
|
for (func_id = HNS3_1ST_VF_FUNC_ID; func_id < pf->func_num; func_id++) {
|
|
hns3_promisc_param_init(¶m, false, false, false, func_id);
|
|
ret = hns3_cmd_set_promisc_mode(hw, ¶m);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "failed to clear vf:%u promisc mode,"
|
|
" ret = %d", func_id, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
hns3_promisc_uninit(struct hns3_hw *hw)
|
|
{
|
|
struct hns3_promisc_param param;
|
|
uint16_t func_id;
|
|
int ret;
|
|
|
|
func_id = HNS3_PF_FUNC_ID;
|
|
|
|
/*
|
|
* In current version VFs are not supported when PF is driven by
|
|
* DPDK driver, and VFs' promisc mode status has been cleared during
|
|
* init and their status will not change. So just clear PF's promisc
|
|
* mode status during uninit.
|
|
*/
|
|
hns3_promisc_param_init(¶m, false, false, false, func_id);
|
|
ret = hns3_cmd_set_promisc_mode(hw, ¶m);
|
|
if (ret)
|
|
PMD_INIT_LOG(ERR, "failed to clear promisc status during"
|
|
" uninit, ret = %d", ret);
|
|
}
|
|
|
|
static int
|
|
hns3_dev_promiscuous_enable(struct rte_eth_dev *dev)
|
|
{
|
|
bool allmulti = dev->data->all_multicast ? true : false;
|
|
struct hns3_adapter *hns = dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
uint64_t offloads;
|
|
int err;
|
|
int ret;
|
|
|
|
rte_spinlock_lock(&hw->lock);
|
|
ret = hns3_set_promisc_mode(hw, true, true);
|
|
if (ret) {
|
|
rte_spinlock_unlock(&hw->lock);
|
|
hns3_err(hw, "failed to enable promiscuous mode, ret = %d",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* When promiscuous mode was enabled, disable the vlan filter to let
|
|
* all packets coming in in the receiving direction.
|
|
*/
|
|
offloads = dev->data->dev_conf.rxmode.offloads;
|
|
if (offloads & DEV_RX_OFFLOAD_VLAN_FILTER) {
|
|
ret = hns3_enable_vlan_filter(hns, false);
|
|
if (ret) {
|
|
hns3_err(hw, "failed to enable promiscuous mode due to "
|
|
"failure to disable vlan filter, ret = %d",
|
|
ret);
|
|
err = hns3_set_promisc_mode(hw, false, allmulti);
|
|
if (err)
|
|
hns3_err(hw, "failed to restore promiscuous "
|
|
"status after disable vlan filter "
|
|
"failed during enabling promiscuous "
|
|
"mode, ret = %d", ret);
|
|
}
|
|
}
|
|
|
|
rte_spinlock_unlock(&hw->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_dev_promiscuous_disable(struct rte_eth_dev *dev)
|
|
{
|
|
bool allmulti = dev->data->all_multicast ? true : false;
|
|
struct hns3_adapter *hns = dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
uint64_t offloads;
|
|
int err;
|
|
int ret;
|
|
|
|
/* If now in all_multicast mode, must remain in all_multicast mode. */
|
|
rte_spinlock_lock(&hw->lock);
|
|
ret = hns3_set_promisc_mode(hw, false, allmulti);
|
|
if (ret) {
|
|
rte_spinlock_unlock(&hw->lock);
|
|
hns3_err(hw, "failed to disable promiscuous mode, ret = %d",
|
|
ret);
|
|
return ret;
|
|
}
|
|
/* when promiscuous mode was disabled, restore the vlan filter status */
|
|
offloads = dev->data->dev_conf.rxmode.offloads;
|
|
if (offloads & DEV_RX_OFFLOAD_VLAN_FILTER) {
|
|
ret = hns3_enable_vlan_filter(hns, true);
|
|
if (ret) {
|
|
hns3_err(hw, "failed to disable promiscuous mode due to"
|
|
" failure to restore vlan filter, ret = %d",
|
|
ret);
|
|
err = hns3_set_promisc_mode(hw, true, true);
|
|
if (err)
|
|
hns3_err(hw, "failed to restore promiscuous "
|
|
"status after enabling vlan filter "
|
|
"failed during disabling promiscuous "
|
|
"mode, ret = %d", ret);
|
|
}
|
|
}
|
|
rte_spinlock_unlock(&hw->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_dev_allmulticast_enable(struct rte_eth_dev *dev)
|
|
{
|
|
struct hns3_adapter *hns = dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int ret;
|
|
|
|
if (dev->data->promiscuous)
|
|
return 0;
|
|
|
|
rte_spinlock_lock(&hw->lock);
|
|
ret = hns3_set_promisc_mode(hw, false, true);
|
|
rte_spinlock_unlock(&hw->lock);
|
|
if (ret)
|
|
hns3_err(hw, "failed to enable allmulticast mode, ret = %d",
|
|
ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_dev_allmulticast_disable(struct rte_eth_dev *dev)
|
|
{
|
|
struct hns3_adapter *hns = dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int ret;
|
|
|
|
/* If now in promiscuous mode, must remain in all_multicast mode. */
|
|
if (dev->data->promiscuous)
|
|
return 0;
|
|
|
|
rte_spinlock_lock(&hw->lock);
|
|
ret = hns3_set_promisc_mode(hw, false, false);
|
|
rte_spinlock_unlock(&hw->lock);
|
|
if (ret)
|
|
hns3_err(hw, "failed to disable allmulticast mode, ret = %d",
|
|
ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_dev_promisc_restore(struct hns3_adapter *hns)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
bool allmulti = hw->data->all_multicast ? true : false;
|
|
int ret;
|
|
|
|
if (hw->data->promiscuous) {
|
|
ret = hns3_set_promisc_mode(hw, true, true);
|
|
if (ret)
|
|
hns3_err(hw, "failed to restore promiscuous mode, "
|
|
"ret = %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = hns3_set_promisc_mode(hw, false, allmulti);
|
|
if (ret)
|
|
hns3_err(hw, "failed to restore allmulticast mode, ret = %d",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_get_sfp_info(struct hns3_hw *hw, struct hns3_mac *mac_info)
|
|
{
|
|
struct hns3_sfp_info_cmd *resp;
|
|
struct hns3_cmd_desc desc;
|
|
int ret;
|
|
|
|
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_GET_SFP_INFO, true);
|
|
resp = (struct hns3_sfp_info_cmd *)desc.data;
|
|
resp->query_type = HNS3_ACTIVE_QUERY;
|
|
|
|
ret = hns3_cmd_send(hw, &desc, 1);
|
|
if (ret == -EOPNOTSUPP) {
|
|
hns3_warn(hw, "firmware does not support get SFP info,"
|
|
" ret = %d.", ret);
|
|
return ret;
|
|
} else if (ret) {
|
|
hns3_err(hw, "get sfp info failed, ret = %d.", ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* In some case, the speed of MAC obtained from firmware may be 0, it
|
|
* shouldn't be set to mac->speed.
|
|
*/
|
|
if (!rte_le_to_cpu_32(resp->sfp_speed))
|
|
return 0;
|
|
|
|
mac_info->link_speed = rte_le_to_cpu_32(resp->sfp_speed);
|
|
/*
|
|
* if resp->supported_speed is 0, it means it's an old version
|
|
* firmware, do not update these params.
|
|
*/
|
|
if (resp->supported_speed) {
|
|
mac_info->query_type = HNS3_ACTIVE_QUERY;
|
|
mac_info->supported_speed =
|
|
rte_le_to_cpu_32(resp->supported_speed);
|
|
mac_info->support_autoneg = resp->autoneg_ability;
|
|
mac_info->link_autoneg = (resp->autoneg == 0) ? ETH_LINK_FIXED
|
|
: ETH_LINK_AUTONEG;
|
|
} else {
|
|
mac_info->query_type = HNS3_DEFAULT_QUERY;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static uint8_t
|
|
hns3_check_speed_dup(uint8_t duplex, uint32_t speed)
|
|
{
|
|
if (!(speed == ETH_SPEED_NUM_10M || speed == ETH_SPEED_NUM_100M))
|
|
duplex = ETH_LINK_FULL_DUPLEX;
|
|
|
|
return duplex;
|
|
}
|
|
|
|
static int
|
|
hns3_cfg_mac_speed_dup(struct hns3_hw *hw, uint32_t speed, uint8_t duplex)
|
|
{
|
|
struct hns3_mac *mac = &hw->mac;
|
|
int ret;
|
|
|
|
duplex = hns3_check_speed_dup(duplex, speed);
|
|
if (mac->link_speed == speed && mac->link_duplex == duplex)
|
|
return 0;
|
|
|
|
ret = hns3_cfg_mac_speed_dup_hw(hw, speed, duplex);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = hns3_port_shaper_update(hw, speed);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mac->link_speed = speed;
|
|
mac->link_duplex = duplex;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3_update_fiber_link_info(struct hns3_hw *hw)
|
|
{
|
|
struct hns3_pf *pf = HNS3_DEV_HW_TO_PF(hw);
|
|
struct hns3_mac *mac = &hw->mac;
|
|
struct hns3_mac mac_info;
|
|
int ret;
|
|
|
|
/* If firmware do not support get SFP/qSFP speed, return directly */
|
|
if (!pf->support_sfp_query)
|
|
return 0;
|
|
|
|
memset(&mac_info, 0, sizeof(struct hns3_mac));
|
|
ret = hns3_get_sfp_info(hw, &mac_info);
|
|
if (ret == -EOPNOTSUPP) {
|
|
pf->support_sfp_query = false;
|
|
return ret;
|
|
} else if (ret)
|
|
return ret;
|
|
|
|
/* Do nothing if no SFP */
|
|
if (mac_info.link_speed == ETH_SPEED_NUM_NONE)
|
|
return 0;
|
|
|
|
/*
|
|
* If query_type is HNS3_ACTIVE_QUERY, it is no need
|
|
* to reconfigure the speed of MAC. Otherwise, it indicates
|
|
* that the current firmware only supports to obtain the
|
|
* speed of the SFP, and the speed of MAC needs to reconfigure.
|
|
*/
|
|
mac->query_type = mac_info.query_type;
|
|
if (mac->query_type == HNS3_ACTIVE_QUERY) {
|
|
if (mac_info.link_speed != mac->link_speed) {
|
|
ret = hns3_port_shaper_update(hw, mac_info.link_speed);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
mac->link_speed = mac_info.link_speed;
|
|
mac->supported_speed = mac_info.supported_speed;
|
|
mac->support_autoneg = mac_info.support_autoneg;
|
|
mac->link_autoneg = mac_info.link_autoneg;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Config full duplex for SFP */
|
|
return hns3_cfg_mac_speed_dup(hw, mac_info.link_speed,
|
|
ETH_LINK_FULL_DUPLEX);
|
|
}
|
|
|
|
static void
|
|
hns3_parse_copper_phy_params(struct hns3_cmd_desc *desc, struct hns3_mac *mac)
|
|
{
|
|
#define HNS3_PHY_SUPPORTED_SPEED_MASK 0x2f
|
|
|
|
struct hns3_phy_params_bd0_cmd *req;
|
|
uint32_t supported;
|
|
|
|
req = (struct hns3_phy_params_bd0_cmd *)desc[0].data;
|
|
mac->link_speed = rte_le_to_cpu_32(req->speed);
|
|
mac->link_duplex = hns3_get_bit(req->duplex,
|
|
HNS3_PHY_DUPLEX_CFG_B);
|
|
mac->link_autoneg = hns3_get_bit(req->autoneg,
|
|
HNS3_PHY_AUTONEG_CFG_B);
|
|
mac->advertising = rte_le_to_cpu_32(req->advertising);
|
|
mac->lp_advertising = rte_le_to_cpu_32(req->lp_advertising);
|
|
supported = rte_le_to_cpu_32(req->supported);
|
|
mac->supported_speed = supported & HNS3_PHY_SUPPORTED_SPEED_MASK;
|
|
mac->support_autoneg = !!(supported & HNS3_PHY_LINK_MODE_AUTONEG_BIT);
|
|
}
|
|
|
|
static int
|
|
hns3_get_copper_phy_params(struct hns3_hw *hw, struct hns3_mac *mac)
|
|
{
|
|
struct hns3_cmd_desc desc[HNS3_PHY_PARAM_CFG_BD_NUM];
|
|
uint16_t i;
|
|
int ret;
|
|
|
|
for (i = 0; i < HNS3_PHY_PARAM_CFG_BD_NUM - 1; i++) {
|
|
hns3_cmd_setup_basic_desc(&desc[i], HNS3_OPC_PHY_PARAM_CFG,
|
|
true);
|
|
desc[i].flag |= rte_cpu_to_le_16(HNS3_CMD_FLAG_NEXT);
|
|
}
|
|
hns3_cmd_setup_basic_desc(&desc[i], HNS3_OPC_PHY_PARAM_CFG, true);
|
|
|
|
ret = hns3_cmd_send(hw, desc, HNS3_PHY_PARAM_CFG_BD_NUM);
|
|
if (ret) {
|
|
hns3_err(hw, "get phy parameters failed, ret = %d.", ret);
|
|
return ret;
|
|
}
|
|
|
|
hns3_parse_copper_phy_params(desc, mac);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3_update_copper_link_info(struct hns3_hw *hw)
|
|
{
|
|
struct hns3_mac *mac = &hw->mac;
|
|
struct hns3_mac mac_info;
|
|
int ret;
|
|
|
|
memset(&mac_info, 0, sizeof(struct hns3_mac));
|
|
ret = hns3_get_copper_phy_params(hw, &mac_info);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (mac_info.link_speed != mac->link_speed) {
|
|
ret = hns3_port_shaper_update(hw, mac_info.link_speed);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
mac->link_speed = mac_info.link_speed;
|
|
mac->link_duplex = mac_info.link_duplex;
|
|
mac->link_autoneg = mac_info.link_autoneg;
|
|
mac->supported_speed = mac_info.supported_speed;
|
|
mac->advertising = mac_info.advertising;
|
|
mac->lp_advertising = mac_info.lp_advertising;
|
|
mac->support_autoneg = mac_info.support_autoneg;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3_update_link_info(struct rte_eth_dev *eth_dev)
|
|
{
|
|
struct hns3_adapter *hns = eth_dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int ret = 0;
|
|
|
|
if (hw->mac.media_type == HNS3_MEDIA_TYPE_COPPER)
|
|
ret = hns3_update_copper_link_info(hw);
|
|
else if (hw->mac.media_type == HNS3_MEDIA_TYPE_FIBER)
|
|
ret = hns3_update_fiber_link_info(hw);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_cfg_mac_mode(struct hns3_hw *hw, bool enable)
|
|
{
|
|
struct hns3_config_mac_mode_cmd *req;
|
|
struct hns3_cmd_desc desc;
|
|
uint32_t loop_en = 0;
|
|
uint8_t val = 0;
|
|
int ret;
|
|
|
|
req = (struct hns3_config_mac_mode_cmd *)desc.data;
|
|
|
|
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_CONFIG_MAC_MODE, false);
|
|
if (enable)
|
|
val = 1;
|
|
hns3_set_bit(loop_en, HNS3_MAC_TX_EN_B, val);
|
|
hns3_set_bit(loop_en, HNS3_MAC_RX_EN_B, val);
|
|
hns3_set_bit(loop_en, HNS3_MAC_PAD_TX_B, val);
|
|
hns3_set_bit(loop_en, HNS3_MAC_PAD_RX_B, val);
|
|
hns3_set_bit(loop_en, HNS3_MAC_1588_TX_B, 0);
|
|
hns3_set_bit(loop_en, HNS3_MAC_1588_RX_B, 0);
|
|
hns3_set_bit(loop_en, HNS3_MAC_APP_LP_B, 0);
|
|
hns3_set_bit(loop_en, HNS3_MAC_LINE_LP_B, 0);
|
|
hns3_set_bit(loop_en, HNS3_MAC_FCS_TX_B, val);
|
|
hns3_set_bit(loop_en, HNS3_MAC_RX_FCS_B, val);
|
|
|
|
/*
|
|
* If DEV_RX_OFFLOAD_KEEP_CRC offload is set, MAC will not strip CRC
|
|
* when receiving frames. Otherwise, CRC will be stripped.
|
|
*/
|
|
if (hw->data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_KEEP_CRC)
|
|
hns3_set_bit(loop_en, HNS3_MAC_RX_FCS_STRIP_B, 0);
|
|
else
|
|
hns3_set_bit(loop_en, HNS3_MAC_RX_FCS_STRIP_B, val);
|
|
hns3_set_bit(loop_en, HNS3_MAC_TX_OVERSIZE_TRUNCATE_B, val);
|
|
hns3_set_bit(loop_en, HNS3_MAC_RX_OVERSIZE_TRUNCATE_B, val);
|
|
hns3_set_bit(loop_en, HNS3_MAC_TX_UNDER_MIN_ERR_B, val);
|
|
req->txrx_pad_fcs_loop_en = rte_cpu_to_le_32(loop_en);
|
|
|
|
ret = hns3_cmd_send(hw, &desc, 1);
|
|
if (ret)
|
|
PMD_INIT_LOG(ERR, "mac enable fail, ret =%d.", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_get_mac_link_status(struct hns3_hw *hw)
|
|
{
|
|
struct hns3_link_status_cmd *req;
|
|
struct hns3_cmd_desc desc;
|
|
int link_status;
|
|
int ret;
|
|
|
|
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_QUERY_LINK_STATUS, true);
|
|
ret = hns3_cmd_send(hw, &desc, 1);
|
|
if (ret) {
|
|
hns3_err(hw, "get link status cmd failed %d", ret);
|
|
return ETH_LINK_DOWN;
|
|
}
|
|
|
|
req = (struct hns3_link_status_cmd *)desc.data;
|
|
link_status = req->status & HNS3_LINK_STATUS_UP_M;
|
|
|
|
return !!link_status;
|
|
}
|
|
|
|
static bool
|
|
hns3_update_link_status(struct hns3_hw *hw)
|
|
{
|
|
int state;
|
|
|
|
state = hns3_get_mac_link_status(hw);
|
|
if (state != hw->mac.link_status) {
|
|
hw->mac.link_status = state;
|
|
hns3_warn(hw, "Link status change to %s!", state ? "up" : "down");
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
void
|
|
hns3_update_linkstatus_and_event(struct hns3_hw *hw, bool query)
|
|
{
|
|
struct rte_eth_dev *dev = &rte_eth_devices[hw->data->port_id];
|
|
struct rte_eth_link new_link;
|
|
int ret;
|
|
|
|
if (query)
|
|
hns3_update_port_link_info(dev);
|
|
|
|
memset(&new_link, 0, sizeof(new_link));
|
|
hns3_setup_linkstatus(dev, &new_link);
|
|
|
|
ret = rte_eth_linkstatus_set(dev, &new_link);
|
|
if (ret == 0 && dev->data->dev_conf.intr_conf.lsc != 0)
|
|
hns3_start_report_lse(dev);
|
|
}
|
|
|
|
static void
|
|
hns3_service_handler(void *param)
|
|
{
|
|
struct rte_eth_dev *eth_dev = (struct rte_eth_dev *)param;
|
|
struct hns3_adapter *hns = eth_dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
|
|
if (!hns3_is_reset_pending(hns))
|
|
hns3_update_linkstatus_and_event(hw, true);
|
|
else
|
|
hns3_warn(hw, "Cancel the query when reset is pending");
|
|
|
|
rte_eal_alarm_set(HNS3_SERVICE_INTERVAL, hns3_service_handler, eth_dev);
|
|
}
|
|
|
|
static int
|
|
hns3_init_hardware(struct hns3_adapter *hns)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int ret;
|
|
|
|
ret = hns3_map_tqp(hw);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "Failed to map tqp: %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = hns3_init_umv_space(hw);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "Failed to init umv space: %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = hns3_mac_init(hw);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "Failed to init MAC: %d", ret);
|
|
goto err_mac_init;
|
|
}
|
|
|
|
ret = hns3_init_mgr_tbl(hw);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "Failed to init manager table: %d", ret);
|
|
goto err_mac_init;
|
|
}
|
|
|
|
ret = hns3_promisc_init(hw);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "Failed to init promisc: %d",
|
|
ret);
|
|
goto err_mac_init;
|
|
}
|
|
|
|
ret = hns3_init_vlan_config(hns);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "Failed to init vlan: %d", ret);
|
|
goto err_mac_init;
|
|
}
|
|
|
|
ret = hns3_dcb_init(hw);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "Failed to init dcb: %d", ret);
|
|
goto err_mac_init;
|
|
}
|
|
|
|
ret = hns3_init_fd_config(hns);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "Failed to init flow director: %d", ret);
|
|
goto err_mac_init;
|
|
}
|
|
|
|
ret = hns3_config_tso(hw, HNS3_TSO_MSS_MIN, HNS3_TSO_MSS_MAX);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "Failed to config tso: %d", ret);
|
|
goto err_mac_init;
|
|
}
|
|
|
|
ret = hns3_config_gro(hw, false);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "Failed to config gro: %d", ret);
|
|
goto err_mac_init;
|
|
}
|
|
|
|
/*
|
|
* In the initialization clearing the all hardware mapping relationship
|
|
* configurations between queues and interrupt vectors is needed, so
|
|
* some error caused by the residual configurations, such as the
|
|
* unexpected interrupt, can be avoid.
|
|
*/
|
|
ret = hns3_init_ring_with_vector(hw);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "Failed to init ring intr vector: %d", ret);
|
|
goto err_mac_init;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_mac_init:
|
|
hns3_uninit_umv_space(hw);
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_clear_hw(struct hns3_hw *hw)
|
|
{
|
|
struct hns3_cmd_desc desc;
|
|
int ret;
|
|
|
|
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_CLEAR_HW_STATE, false);
|
|
|
|
ret = hns3_cmd_send(hw, &desc, 1);
|
|
if (ret && ret != -EOPNOTSUPP)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
hns3_config_all_msix_error(struct hns3_hw *hw, bool enable)
|
|
{
|
|
uint32_t val;
|
|
|
|
/*
|
|
* The new firmware support report more hardware error types by
|
|
* msix mode. These errors are defined as RAS errors in hardware
|
|
* and belong to a different type from the MSI-x errors processed
|
|
* by the network driver.
|
|
*
|
|
* Network driver should open the new error report on initialization.
|
|
*/
|
|
val = hns3_read_dev(hw, HNS3_VECTOR0_OTER_EN_REG);
|
|
hns3_set_bit(val, HNS3_VECTOR0_ALL_MSIX_ERR_B, enable ? 1 : 0);
|
|
hns3_write_dev(hw, HNS3_VECTOR0_OTER_EN_REG, val);
|
|
}
|
|
|
|
static uint32_t
|
|
hns3_set_firber_default_support_speed(struct hns3_hw *hw)
|
|
{
|
|
struct hns3_mac *mac = &hw->mac;
|
|
|
|
switch (mac->link_speed) {
|
|
case ETH_SPEED_NUM_1G:
|
|
return HNS3_FIBER_LINK_SPEED_1G_BIT;
|
|
case ETH_SPEED_NUM_10G:
|
|
return HNS3_FIBER_LINK_SPEED_10G_BIT;
|
|
case ETH_SPEED_NUM_25G:
|
|
return HNS3_FIBER_LINK_SPEED_25G_BIT;
|
|
case ETH_SPEED_NUM_40G:
|
|
return HNS3_FIBER_LINK_SPEED_40G_BIT;
|
|
case ETH_SPEED_NUM_50G:
|
|
return HNS3_FIBER_LINK_SPEED_50G_BIT;
|
|
case ETH_SPEED_NUM_100G:
|
|
return HNS3_FIBER_LINK_SPEED_100G_BIT;
|
|
case ETH_SPEED_NUM_200G:
|
|
return HNS3_FIBER_LINK_SPEED_200G_BIT;
|
|
default:
|
|
hns3_warn(hw, "invalid speed %u Mbps.", mac->link_speed);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Validity of supported_speed for firber and copper media type can be
|
|
* guaranteed by the following policy:
|
|
* Copper:
|
|
* Although the initialization of the phy in the firmware may not be
|
|
* completed, the firmware can guarantees that the supported_speed is
|
|
* an valid value.
|
|
* Firber:
|
|
* If the version of firmware supports the acitive query way of the
|
|
* HNS3_OPC_GET_SFP_INFO opcode, the supported_speed can be obtained
|
|
* through it. If unsupported, use the SFP's speed as the value of the
|
|
* supported_speed.
|
|
*/
|
|
static int
|
|
hns3_get_port_supported_speed(struct rte_eth_dev *eth_dev)
|
|
{
|
|
struct hns3_adapter *hns = eth_dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
struct hns3_mac *mac = &hw->mac;
|
|
int ret;
|
|
|
|
ret = hns3_update_link_info(eth_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (mac->media_type == HNS3_MEDIA_TYPE_FIBER) {
|
|
/*
|
|
* Some firmware does not support the report of supported_speed,
|
|
* and only report the effective speed of SFP. In this case, it
|
|
* is necessary to use the SFP's speed as the supported_speed.
|
|
*/
|
|
if (mac->supported_speed == 0)
|
|
mac->supported_speed =
|
|
hns3_set_firber_default_support_speed(hw);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
hns3_get_fc_autoneg_capability(struct hns3_adapter *hns)
|
|
{
|
|
struct hns3_mac *mac = &hns->hw.mac;
|
|
|
|
if (mac->media_type == HNS3_MEDIA_TYPE_COPPER) {
|
|
hns->pf.support_fc_autoneg = true;
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Flow control auto-negotiation requires the cooperation of the driver
|
|
* and firmware. Currently, the optical port does not support flow
|
|
* control auto-negotiation.
|
|
*/
|
|
hns->pf.support_fc_autoneg = false;
|
|
}
|
|
|
|
static int
|
|
hns3_init_pf(struct rte_eth_dev *eth_dev)
|
|
{
|
|
struct rte_device *dev = eth_dev->device;
|
|
struct rte_pci_device *pci_dev = RTE_DEV_TO_PCI(dev);
|
|
struct hns3_adapter *hns = eth_dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int ret;
|
|
|
|
PMD_INIT_FUNC_TRACE();
|
|
|
|
/* Get hardware io base address from pcie BAR2 IO space */
|
|
hw->io_base = pci_dev->mem_resource[2].addr;
|
|
|
|
/* Firmware command queue initialize */
|
|
ret = hns3_cmd_init_queue(hw);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "Failed to init cmd queue: %d", ret);
|
|
goto err_cmd_init_queue;
|
|
}
|
|
|
|
hns3_clear_all_event_cause(hw);
|
|
|
|
/* Firmware command initialize */
|
|
ret = hns3_cmd_init(hw);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "Failed to init cmd: %d", ret);
|
|
goto err_cmd_init;
|
|
}
|
|
|
|
hns3_tx_push_init(eth_dev);
|
|
|
|
/*
|
|
* To ensure that the hardware environment is clean during
|
|
* initialization, the driver actively clear the hardware environment
|
|
* during initialization, including PF and corresponding VFs' vlan, mac,
|
|
* flow table configurations, etc.
|
|
*/
|
|
ret = hns3_clear_hw(hw);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "failed to clear hardware: %d", ret);
|
|
goto err_cmd_init;
|
|
}
|
|
|
|
/* Hardware statistics of imissed registers cleared. */
|
|
ret = hns3_update_imissed_stats(hw, true);
|
|
if (ret) {
|
|
hns3_err(hw, "clear imissed stats failed, ret = %d", ret);
|
|
goto err_cmd_init;
|
|
}
|
|
|
|
hns3_config_all_msix_error(hw, true);
|
|
|
|
ret = rte_intr_callback_register(&pci_dev->intr_handle,
|
|
hns3_interrupt_handler,
|
|
eth_dev);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "Failed to register intr: %d", ret);
|
|
goto err_intr_callback_register;
|
|
}
|
|
|
|
ret = hns3_ptp_init(hw);
|
|
if (ret)
|
|
goto err_get_config;
|
|
|
|
/* Enable interrupt */
|
|
rte_intr_enable(&pci_dev->intr_handle);
|
|
hns3_pf_enable_irq0(hw);
|
|
|
|
/* Get configuration */
|
|
ret = hns3_get_configuration(hw);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "Failed to fetch configuration: %d", ret);
|
|
goto err_get_config;
|
|
}
|
|
|
|
ret = hns3_tqp_stats_init(hw);
|
|
if (ret)
|
|
goto err_get_config;
|
|
|
|
ret = hns3_init_hardware(hns);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "Failed to init hardware: %d", ret);
|
|
goto err_init_hw;
|
|
}
|
|
|
|
/* Initialize flow director filter list & hash */
|
|
ret = hns3_fdir_filter_init(hns);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "Failed to alloc hashmap for fdir: %d", ret);
|
|
goto err_fdir;
|
|
}
|
|
|
|
hns3_rss_set_default_args(hw);
|
|
|
|
ret = hns3_enable_hw_error_intr(hns, true);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "fail to enable hw error interrupts: %d",
|
|
ret);
|
|
goto err_enable_intr;
|
|
}
|
|
|
|
ret = hns3_get_port_supported_speed(eth_dev);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "failed to get speed capabilities supported "
|
|
"by device, ret = %d.", ret);
|
|
goto err_supported_speed;
|
|
}
|
|
|
|
hns3_get_fc_autoneg_capability(hns);
|
|
|
|
hns3_tm_conf_init(eth_dev);
|
|
|
|
return 0;
|
|
|
|
err_supported_speed:
|
|
(void)hns3_enable_hw_error_intr(hns, false);
|
|
err_enable_intr:
|
|
hns3_fdir_filter_uninit(hns);
|
|
err_fdir:
|
|
hns3_uninit_umv_space(hw);
|
|
err_init_hw:
|
|
hns3_tqp_stats_uninit(hw);
|
|
err_get_config:
|
|
hns3_pf_disable_irq0(hw);
|
|
rte_intr_disable(&pci_dev->intr_handle);
|
|
hns3_intr_unregister(&pci_dev->intr_handle, hns3_interrupt_handler,
|
|
eth_dev);
|
|
err_intr_callback_register:
|
|
err_cmd_init:
|
|
hns3_cmd_uninit(hw);
|
|
hns3_cmd_destroy_queue(hw);
|
|
err_cmd_init_queue:
|
|
hw->io_base = NULL;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void
|
|
hns3_uninit_pf(struct rte_eth_dev *eth_dev)
|
|
{
|
|
struct hns3_adapter *hns = eth_dev->data->dev_private;
|
|
struct rte_device *dev = eth_dev->device;
|
|
struct rte_pci_device *pci_dev = RTE_DEV_TO_PCI(dev);
|
|
struct hns3_hw *hw = &hns->hw;
|
|
|
|
PMD_INIT_FUNC_TRACE();
|
|
|
|
hns3_tm_conf_uninit(eth_dev);
|
|
hns3_enable_hw_error_intr(hns, false);
|
|
hns3_rss_uninit(hns);
|
|
(void)hns3_config_gro(hw, false);
|
|
hns3_promisc_uninit(hw);
|
|
hns3_fdir_filter_uninit(hns);
|
|
hns3_uninit_umv_space(hw);
|
|
hns3_tqp_stats_uninit(hw);
|
|
hns3_config_mac_tnl_int(hw, false);
|
|
hns3_pf_disable_irq0(hw);
|
|
rte_intr_disable(&pci_dev->intr_handle);
|
|
hns3_intr_unregister(&pci_dev->intr_handle, hns3_interrupt_handler,
|
|
eth_dev);
|
|
hns3_config_all_msix_error(hw, false);
|
|
hns3_cmd_uninit(hw);
|
|
hns3_cmd_destroy_queue(hw);
|
|
hw->io_base = NULL;
|
|
}
|
|
|
|
static uint32_t
|
|
hns3_convert_link_speeds2bitmap_copper(uint32_t link_speeds)
|
|
{
|
|
uint32_t speed_bit;
|
|
|
|
switch (link_speeds & ~ETH_LINK_SPEED_FIXED) {
|
|
case ETH_LINK_SPEED_10M:
|
|
speed_bit = HNS3_PHY_LINK_SPEED_10M_BIT;
|
|
break;
|
|
case ETH_LINK_SPEED_10M_HD:
|
|
speed_bit = HNS3_PHY_LINK_SPEED_10M_HD_BIT;
|
|
break;
|
|
case ETH_LINK_SPEED_100M:
|
|
speed_bit = HNS3_PHY_LINK_SPEED_100M_BIT;
|
|
break;
|
|
case ETH_LINK_SPEED_100M_HD:
|
|
speed_bit = HNS3_PHY_LINK_SPEED_100M_HD_BIT;
|
|
break;
|
|
case ETH_LINK_SPEED_1G:
|
|
speed_bit = HNS3_PHY_LINK_SPEED_1000M_BIT;
|
|
break;
|
|
default:
|
|
speed_bit = 0;
|
|
break;
|
|
}
|
|
|
|
return speed_bit;
|
|
}
|
|
|
|
static uint32_t
|
|
hns3_convert_link_speeds2bitmap_fiber(uint32_t link_speeds)
|
|
{
|
|
uint32_t speed_bit;
|
|
|
|
switch (link_speeds & ~ETH_LINK_SPEED_FIXED) {
|
|
case ETH_LINK_SPEED_1G:
|
|
speed_bit = HNS3_FIBER_LINK_SPEED_1G_BIT;
|
|
break;
|
|
case ETH_LINK_SPEED_10G:
|
|
speed_bit = HNS3_FIBER_LINK_SPEED_10G_BIT;
|
|
break;
|
|
case ETH_LINK_SPEED_25G:
|
|
speed_bit = HNS3_FIBER_LINK_SPEED_25G_BIT;
|
|
break;
|
|
case ETH_LINK_SPEED_40G:
|
|
speed_bit = HNS3_FIBER_LINK_SPEED_40G_BIT;
|
|
break;
|
|
case ETH_LINK_SPEED_50G:
|
|
speed_bit = HNS3_FIBER_LINK_SPEED_50G_BIT;
|
|
break;
|
|
case ETH_LINK_SPEED_100G:
|
|
speed_bit = HNS3_FIBER_LINK_SPEED_100G_BIT;
|
|
break;
|
|
case ETH_LINK_SPEED_200G:
|
|
speed_bit = HNS3_FIBER_LINK_SPEED_200G_BIT;
|
|
break;
|
|
default:
|
|
speed_bit = 0;
|
|
break;
|
|
}
|
|
|
|
return speed_bit;
|
|
}
|
|
|
|
static int
|
|
hns3_check_port_speed(struct hns3_hw *hw, uint32_t link_speeds)
|
|
{
|
|
struct hns3_mac *mac = &hw->mac;
|
|
uint32_t supported_speed = mac->supported_speed;
|
|
uint32_t speed_bit = 0;
|
|
|
|
if (mac->media_type == HNS3_MEDIA_TYPE_COPPER)
|
|
speed_bit = hns3_convert_link_speeds2bitmap_copper(link_speeds);
|
|
else if (mac->media_type == HNS3_MEDIA_TYPE_FIBER)
|
|
speed_bit = hns3_convert_link_speeds2bitmap_fiber(link_speeds);
|
|
|
|
if (!(speed_bit & supported_speed)) {
|
|
hns3_err(hw, "link_speeds(0x%x) exceeds the supported speed capability or is incorrect.",
|
|
link_speeds);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline uint32_t
|
|
hns3_get_link_speed(uint32_t link_speeds)
|
|
{
|
|
uint32_t speed = ETH_SPEED_NUM_NONE;
|
|
|
|
if (link_speeds & ETH_LINK_SPEED_10M ||
|
|
link_speeds & ETH_LINK_SPEED_10M_HD)
|
|
speed = ETH_SPEED_NUM_10M;
|
|
if (link_speeds & ETH_LINK_SPEED_100M ||
|
|
link_speeds & ETH_LINK_SPEED_100M_HD)
|
|
speed = ETH_SPEED_NUM_100M;
|
|
if (link_speeds & ETH_LINK_SPEED_1G)
|
|
speed = ETH_SPEED_NUM_1G;
|
|
if (link_speeds & ETH_LINK_SPEED_10G)
|
|
speed = ETH_SPEED_NUM_10G;
|
|
if (link_speeds & ETH_LINK_SPEED_25G)
|
|
speed = ETH_SPEED_NUM_25G;
|
|
if (link_speeds & ETH_LINK_SPEED_40G)
|
|
speed = ETH_SPEED_NUM_40G;
|
|
if (link_speeds & ETH_LINK_SPEED_50G)
|
|
speed = ETH_SPEED_NUM_50G;
|
|
if (link_speeds & ETH_LINK_SPEED_100G)
|
|
speed = ETH_SPEED_NUM_100G;
|
|
if (link_speeds & ETH_LINK_SPEED_200G)
|
|
speed = ETH_SPEED_NUM_200G;
|
|
|
|
return speed;
|
|
}
|
|
|
|
static uint8_t
|
|
hns3_get_link_duplex(uint32_t link_speeds)
|
|
{
|
|
if ((link_speeds & ETH_LINK_SPEED_10M_HD) ||
|
|
(link_speeds & ETH_LINK_SPEED_100M_HD))
|
|
return ETH_LINK_HALF_DUPLEX;
|
|
else
|
|
return ETH_LINK_FULL_DUPLEX;
|
|
}
|
|
|
|
static int
|
|
hns3_set_copper_port_link_speed(struct hns3_hw *hw,
|
|
struct hns3_set_link_speed_cfg *cfg)
|
|
{
|
|
struct hns3_cmd_desc desc[HNS3_PHY_PARAM_CFG_BD_NUM];
|
|
struct hns3_phy_params_bd0_cmd *req;
|
|
uint16_t i;
|
|
|
|
for (i = 0; i < HNS3_PHY_PARAM_CFG_BD_NUM - 1; i++) {
|
|
hns3_cmd_setup_basic_desc(&desc[i], HNS3_OPC_PHY_PARAM_CFG,
|
|
false);
|
|
desc[i].flag |= rte_cpu_to_le_16(HNS3_CMD_FLAG_NEXT);
|
|
}
|
|
hns3_cmd_setup_basic_desc(&desc[i], HNS3_OPC_PHY_PARAM_CFG, false);
|
|
req = (struct hns3_phy_params_bd0_cmd *)desc[0].data;
|
|
req->autoneg = cfg->autoneg;
|
|
|
|
/*
|
|
* The full speed capability is used to negotiate when
|
|
* auto-negotiation is enabled.
|
|
*/
|
|
if (cfg->autoneg) {
|
|
req->advertising = HNS3_PHY_LINK_SPEED_10M_BIT |
|
|
HNS3_PHY_LINK_SPEED_10M_HD_BIT |
|
|
HNS3_PHY_LINK_SPEED_100M_BIT |
|
|
HNS3_PHY_LINK_SPEED_100M_HD_BIT |
|
|
HNS3_PHY_LINK_SPEED_1000M_BIT;
|
|
} else {
|
|
req->speed = cfg->speed;
|
|
req->duplex = cfg->duplex;
|
|
}
|
|
|
|
return hns3_cmd_send(hw, desc, HNS3_PHY_PARAM_CFG_BD_NUM);
|
|
}
|
|
|
|
static int
|
|
hns3_set_autoneg(struct hns3_hw *hw, bool enable)
|
|
{
|
|
struct hns3_config_auto_neg_cmd *req;
|
|
struct hns3_cmd_desc desc;
|
|
uint32_t flag = 0;
|
|
int ret;
|
|
|
|
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_CONFIG_AN_MODE, false);
|
|
|
|
req = (struct hns3_config_auto_neg_cmd *)desc.data;
|
|
if (enable)
|
|
hns3_set_bit(flag, HNS3_MAC_CFG_AN_EN_B, 1);
|
|
req->cfg_an_cmd_flag = rte_cpu_to_le_32(flag);
|
|
|
|
ret = hns3_cmd_send(hw, &desc, 1);
|
|
if (ret)
|
|
hns3_err(hw, "autoneg set cmd failed, ret = %d.", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_set_fiber_port_link_speed(struct hns3_hw *hw,
|
|
struct hns3_set_link_speed_cfg *cfg)
|
|
{
|
|
int ret;
|
|
|
|
if (hw->mac.support_autoneg) {
|
|
ret = hns3_set_autoneg(hw, cfg->autoneg);
|
|
if (ret) {
|
|
hns3_err(hw, "failed to configure auto-negotiation.");
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* To enable auto-negotiation, we only need to open the switch
|
|
* of auto-negotiation, then firmware sets all speed
|
|
* capabilities.
|
|
*/
|
|
if (cfg->autoneg)
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Some hardware doesn't support auto-negotiation, but users may not
|
|
* configure link_speeds (default 0), which means auto-negotiation.
|
|
* In this case, it should return success.
|
|
*/
|
|
if (cfg->autoneg)
|
|
return 0;
|
|
|
|
return hns3_cfg_mac_speed_dup(hw, cfg->speed, cfg->duplex);
|
|
}
|
|
|
|
static int
|
|
hns3_set_port_link_speed(struct hns3_hw *hw,
|
|
struct hns3_set_link_speed_cfg *cfg)
|
|
{
|
|
int ret;
|
|
|
|
if (hw->mac.media_type == HNS3_MEDIA_TYPE_COPPER) {
|
|
#if defined(RTE_HNS3_ONLY_1630_FPGA)
|
|
struct hns3_pf *pf = HNS3_DEV_HW_TO_PF(hw);
|
|
if (pf->is_tmp_phy)
|
|
return 0;
|
|
#endif
|
|
|
|
ret = hns3_set_copper_port_link_speed(hw, cfg);
|
|
if (ret) {
|
|
hns3_err(hw, "failed to set copper port link speed,"
|
|
"ret = %d.", ret);
|
|
return ret;
|
|
}
|
|
} else if (hw->mac.media_type == HNS3_MEDIA_TYPE_FIBER) {
|
|
ret = hns3_set_fiber_port_link_speed(hw, cfg);
|
|
if (ret) {
|
|
hns3_err(hw, "failed to set fiber port link speed,"
|
|
"ret = %d.", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3_apply_link_speed(struct hns3_hw *hw)
|
|
{
|
|
struct rte_eth_conf *conf = &hw->data->dev_conf;
|
|
struct hns3_set_link_speed_cfg cfg;
|
|
|
|
memset(&cfg, 0, sizeof(struct hns3_set_link_speed_cfg));
|
|
cfg.autoneg = (conf->link_speeds == ETH_LINK_SPEED_AUTONEG) ?
|
|
ETH_LINK_AUTONEG : ETH_LINK_FIXED;
|
|
if (cfg.autoneg != ETH_LINK_AUTONEG) {
|
|
cfg.speed = hns3_get_link_speed(conf->link_speeds);
|
|
cfg.duplex = hns3_get_link_duplex(conf->link_speeds);
|
|
}
|
|
|
|
return hns3_set_port_link_speed(hw, &cfg);
|
|
}
|
|
|
|
static int
|
|
hns3_do_start(struct hns3_adapter *hns, bool reset_queue)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int ret;
|
|
|
|
ret = hns3_update_queue_map_configure(hns);
|
|
if (ret) {
|
|
hns3_err(hw, "failed to update queue mapping configuration, ret = %d",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Note: hns3_tm_conf_update must be called after configuring DCB. */
|
|
ret = hns3_tm_conf_update(hw);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "failed to update tm conf, ret = %d.", ret);
|
|
return ret;
|
|
}
|
|
|
|
hns3_enable_rxd_adv_layout(hw);
|
|
|
|
ret = hns3_init_queues(hns, reset_queue);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "failed to init queues, ret = %d.", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = hns3_cfg_mac_mode(hw, true);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "failed to enable MAC, ret = %d", ret);
|
|
goto err_config_mac_mode;
|
|
}
|
|
|
|
ret = hns3_apply_link_speed(hw);
|
|
if (ret)
|
|
goto err_set_link_speed;
|
|
|
|
return 0;
|
|
|
|
err_set_link_speed:
|
|
(void)hns3_cfg_mac_mode(hw, false);
|
|
|
|
err_config_mac_mode:
|
|
hns3_dev_release_mbufs(hns);
|
|
/*
|
|
* Here is exception handling, hns3_reset_all_tqps will have the
|
|
* corresponding error message if it is handled incorrectly, so it is
|
|
* not necessary to check hns3_reset_all_tqps return value, here keep
|
|
* ret as the error code causing the exception.
|
|
*/
|
|
(void)hns3_reset_all_tqps(hns);
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_map_rx_interrupt(struct rte_eth_dev *dev)
|
|
{
|
|
struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
|
|
struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
|
|
struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
|
|
uint16_t base = RTE_INTR_VEC_ZERO_OFFSET;
|
|
uint16_t vec = RTE_INTR_VEC_ZERO_OFFSET;
|
|
uint32_t intr_vector;
|
|
uint16_t q_id;
|
|
int ret;
|
|
|
|
/*
|
|
* hns3 needs a separate interrupt to be used as event interrupt which
|
|
* could not be shared with task queue pair, so KERNEL drivers need
|
|
* support multiple interrupt vectors.
|
|
*/
|
|
if (dev->data->dev_conf.intr_conf.rxq == 0 ||
|
|
!rte_intr_cap_multiple(intr_handle))
|
|
return 0;
|
|
|
|
rte_intr_disable(intr_handle);
|
|
intr_vector = hw->used_rx_queues;
|
|
/* creates event fd for each intr vector when MSIX is used */
|
|
if (rte_intr_efd_enable(intr_handle, intr_vector))
|
|
return -EINVAL;
|
|
|
|
if (intr_handle->intr_vec == NULL) {
|
|
intr_handle->intr_vec =
|
|
rte_zmalloc("intr_vec",
|
|
hw->used_rx_queues * sizeof(int), 0);
|
|
if (intr_handle->intr_vec == NULL) {
|
|
hns3_err(hw, "failed to allocate %u rx_queues intr_vec",
|
|
hw->used_rx_queues);
|
|
ret = -ENOMEM;
|
|
goto alloc_intr_vec_error;
|
|
}
|
|
}
|
|
|
|
if (rte_intr_allow_others(intr_handle)) {
|
|
vec = RTE_INTR_VEC_RXTX_OFFSET;
|
|
base = RTE_INTR_VEC_RXTX_OFFSET;
|
|
}
|
|
|
|
for (q_id = 0; q_id < hw->used_rx_queues; q_id++) {
|
|
ret = hns3_bind_ring_with_vector(hw, vec, true,
|
|
HNS3_RING_TYPE_RX, q_id);
|
|
if (ret)
|
|
goto bind_vector_error;
|
|
intr_handle->intr_vec[q_id] = vec;
|
|
/*
|
|
* If there are not enough efds (e.g. not enough interrupt),
|
|
* remaining queues will be bond to the last interrupt.
|
|
*/
|
|
if (vec < base + intr_handle->nb_efd - 1)
|
|
vec++;
|
|
}
|
|
rte_intr_enable(intr_handle);
|
|
return 0;
|
|
|
|
bind_vector_error:
|
|
rte_free(intr_handle->intr_vec);
|
|
intr_handle->intr_vec = NULL;
|
|
alloc_intr_vec_error:
|
|
rte_intr_efd_disable(intr_handle);
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_restore_rx_interrupt(struct hns3_hw *hw)
|
|
{
|
|
struct rte_eth_dev *dev = &rte_eth_devices[hw->data->port_id];
|
|
struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
|
|
struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
|
|
uint16_t q_id;
|
|
int ret;
|
|
|
|
if (dev->data->dev_conf.intr_conf.rxq == 0)
|
|
return 0;
|
|
|
|
if (rte_intr_dp_is_en(intr_handle)) {
|
|
for (q_id = 0; q_id < hw->used_rx_queues; q_id++) {
|
|
ret = hns3_bind_ring_with_vector(hw,
|
|
intr_handle->intr_vec[q_id], true,
|
|
HNS3_RING_TYPE_RX, q_id);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
hns3_restore_filter(struct rte_eth_dev *dev)
|
|
{
|
|
hns3_restore_rss_filter(dev);
|
|
}
|
|
|
|
static int
|
|
hns3_dev_start(struct rte_eth_dev *dev)
|
|
{
|
|
struct hns3_adapter *hns = dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int ret;
|
|
|
|
PMD_INIT_FUNC_TRACE();
|
|
if (__atomic_load_n(&hw->reset.resetting, __ATOMIC_RELAXED))
|
|
return -EBUSY;
|
|
|
|
rte_spinlock_lock(&hw->lock);
|
|
hw->adapter_state = HNS3_NIC_STARTING;
|
|
|
|
ret = hns3_do_start(hns, true);
|
|
if (ret) {
|
|
hw->adapter_state = HNS3_NIC_CONFIGURED;
|
|
rte_spinlock_unlock(&hw->lock);
|
|
return ret;
|
|
}
|
|
ret = hns3_map_rx_interrupt(dev);
|
|
if (ret)
|
|
goto map_rx_inter_err;
|
|
|
|
/*
|
|
* There are three register used to control the status of a TQP
|
|
* (contains a pair of Tx queue and Rx queue) in the new version network
|
|
* engine. One is used to control the enabling of Tx queue, the other is
|
|
* used to control the enabling of Rx queue, and the last is the master
|
|
* switch used to control the enabling of the tqp. The Tx register and
|
|
* TQP register must be enabled at the same time to enable a Tx queue.
|
|
* The same applies to the Rx queue. For the older network engine, this
|
|
* function only refresh the enabled flag, and it is used to update the
|
|
* status of queue in the dpdk framework.
|
|
*/
|
|
ret = hns3_start_all_txqs(dev);
|
|
if (ret)
|
|
goto map_rx_inter_err;
|
|
|
|
ret = hns3_start_all_rxqs(dev);
|
|
if (ret)
|
|
goto start_all_rxqs_fail;
|
|
|
|
hw->adapter_state = HNS3_NIC_STARTED;
|
|
rte_spinlock_unlock(&hw->lock);
|
|
|
|
hns3_rx_scattered_calc(dev);
|
|
hns3_set_rxtx_function(dev);
|
|
hns3_mp_req_start_rxtx(dev);
|
|
|
|
hns3_restore_filter(dev);
|
|
|
|
/* Enable interrupt of all rx queues before enabling queues */
|
|
hns3_dev_all_rx_queue_intr_enable(hw, true);
|
|
|
|
/*
|
|
* After finished the initialization, enable tqps to receive/transmit
|
|
* packets and refresh all queue status.
|
|
*/
|
|
hns3_start_tqps(hw);
|
|
|
|
hns3_tm_dev_start_proc(hw);
|
|
|
|
if (dev->data->dev_conf.intr_conf.lsc != 0)
|
|
hns3_dev_link_update(dev, 0);
|
|
rte_eal_alarm_set(HNS3_SERVICE_INTERVAL, hns3_service_handler, dev);
|
|
|
|
hns3_info(hw, "hns3 dev start successful!");
|
|
|
|
return 0;
|
|
|
|
start_all_rxqs_fail:
|
|
hns3_stop_all_txqs(dev);
|
|
map_rx_inter_err:
|
|
(void)hns3_do_stop(hns);
|
|
hw->adapter_state = HNS3_NIC_CONFIGURED;
|
|
rte_spinlock_unlock(&hw->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_do_stop(struct hns3_adapter *hns)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int ret;
|
|
|
|
/*
|
|
* The "hns3_do_stop" function will also be called by .stop_service to
|
|
* prepare reset. At the time of global or IMP reset, the command cannot
|
|
* be sent to stop the tx/rx queues. The mbuf in Tx/Rx queues may be
|
|
* accessed during the reset process. So the mbuf can not be released
|
|
* during reset and is required to be released after the reset is
|
|
* completed.
|
|
*/
|
|
if (__atomic_load_n(&hw->reset.resetting, __ATOMIC_RELAXED) == 0)
|
|
hns3_dev_release_mbufs(hns);
|
|
|
|
ret = hns3_cfg_mac_mode(hw, false);
|
|
if (ret)
|
|
return ret;
|
|
hw->mac.link_status = ETH_LINK_DOWN;
|
|
|
|
if (__atomic_load_n(&hw->reset.disable_cmd, __ATOMIC_RELAXED) == 0) {
|
|
hns3_configure_all_mac_addr(hns, true);
|
|
ret = hns3_reset_all_tqps(hns);
|
|
if (ret) {
|
|
hns3_err(hw, "failed to reset all queues ret = %d.",
|
|
ret);
|
|
return ret;
|
|
}
|
|
}
|
|
hw->mac.default_addr_setted = false;
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
hns3_unmap_rx_interrupt(struct rte_eth_dev *dev)
|
|
{
|
|
struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
|
|
struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
|
|
struct hns3_adapter *hns = dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
uint8_t base = RTE_INTR_VEC_ZERO_OFFSET;
|
|
uint8_t vec = RTE_INTR_VEC_ZERO_OFFSET;
|
|
uint16_t q_id;
|
|
|
|
if (dev->data->dev_conf.intr_conf.rxq == 0)
|
|
return;
|
|
|
|
/* unmap the ring with vector */
|
|
if (rte_intr_allow_others(intr_handle)) {
|
|
vec = RTE_INTR_VEC_RXTX_OFFSET;
|
|
base = RTE_INTR_VEC_RXTX_OFFSET;
|
|
}
|
|
if (rte_intr_dp_is_en(intr_handle)) {
|
|
for (q_id = 0; q_id < hw->used_rx_queues; q_id++) {
|
|
(void)hns3_bind_ring_with_vector(hw, vec, false,
|
|
HNS3_RING_TYPE_RX,
|
|
q_id);
|
|
if (vec < base + intr_handle->nb_efd - 1)
|
|
vec++;
|
|
}
|
|
}
|
|
/* Clean datapath event and queue/vec mapping */
|
|
rte_intr_efd_disable(intr_handle);
|
|
if (intr_handle->intr_vec) {
|
|
rte_free(intr_handle->intr_vec);
|
|
intr_handle->intr_vec = NULL;
|
|
}
|
|
}
|
|
|
|
static int
|
|
hns3_dev_stop(struct rte_eth_dev *dev)
|
|
{
|
|
struct hns3_adapter *hns = dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
|
|
PMD_INIT_FUNC_TRACE();
|
|
dev->data->dev_started = 0;
|
|
|
|
hw->adapter_state = HNS3_NIC_STOPPING;
|
|
hns3_set_rxtx_function(dev);
|
|
rte_wmb();
|
|
/* Disable datapath on secondary process. */
|
|
hns3_mp_req_stop_rxtx(dev);
|
|
/* Prevent crashes when queues are still in use. */
|
|
rte_delay_ms(hw->cfg_max_queues);
|
|
|
|
rte_spinlock_lock(&hw->lock);
|
|
if (__atomic_load_n(&hw->reset.resetting, __ATOMIC_RELAXED) == 0) {
|
|
hns3_tm_dev_stop_proc(hw);
|
|
hns3_config_mac_tnl_int(hw, false);
|
|
hns3_stop_tqps(hw);
|
|
hns3_do_stop(hns);
|
|
hns3_unmap_rx_interrupt(dev);
|
|
hw->adapter_state = HNS3_NIC_CONFIGURED;
|
|
}
|
|
hns3_rx_scattered_reset(dev);
|
|
rte_eal_alarm_cancel(hns3_service_handler, dev);
|
|
hns3_stop_report_lse(dev);
|
|
rte_spinlock_unlock(&hw->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3_dev_close(struct rte_eth_dev *eth_dev)
|
|
{
|
|
struct hns3_adapter *hns = eth_dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int ret = 0;
|
|
|
|
if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
|
|
rte_free(eth_dev->process_private);
|
|
eth_dev->process_private = NULL;
|
|
return 0;
|
|
}
|
|
|
|
if (hw->adapter_state == HNS3_NIC_STARTED)
|
|
ret = hns3_dev_stop(eth_dev);
|
|
|
|
hw->adapter_state = HNS3_NIC_CLOSING;
|
|
hns3_reset_abort(hns);
|
|
hw->adapter_state = HNS3_NIC_CLOSED;
|
|
|
|
hns3_configure_all_mc_mac_addr(hns, true);
|
|
hns3_remove_all_vlan_table(hns);
|
|
hns3_vlan_txvlan_cfg(hns, HNS3_PORT_BASE_VLAN_DISABLE, 0);
|
|
hns3_uninit_pf(eth_dev);
|
|
hns3_free_all_queues(eth_dev);
|
|
rte_free(hw->reset.wait_data);
|
|
rte_free(eth_dev->process_private);
|
|
eth_dev->process_private = NULL;
|
|
hns3_mp_uninit_primary();
|
|
hns3_warn(hw, "Close port %u finished", hw->data->port_id);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void
|
|
hns3_get_autoneg_rxtx_pause_copper(struct hns3_hw *hw, bool *rx_pause,
|
|
bool *tx_pause)
|
|
{
|
|
struct hns3_mac *mac = &hw->mac;
|
|
uint32_t advertising = mac->advertising;
|
|
uint32_t lp_advertising = mac->lp_advertising;
|
|
*rx_pause = false;
|
|
*tx_pause = false;
|
|
|
|
if (advertising & lp_advertising & HNS3_PHY_LINK_MODE_PAUSE_BIT) {
|
|
*rx_pause = true;
|
|
*tx_pause = true;
|
|
} else if (advertising & lp_advertising &
|
|
HNS3_PHY_LINK_MODE_ASYM_PAUSE_BIT) {
|
|
if (advertising & HNS3_PHY_LINK_MODE_PAUSE_BIT)
|
|
*rx_pause = true;
|
|
else if (lp_advertising & HNS3_PHY_LINK_MODE_PAUSE_BIT)
|
|
*tx_pause = true;
|
|
}
|
|
}
|
|
|
|
static enum hns3_fc_mode
|
|
hns3_get_autoneg_fc_mode(struct hns3_hw *hw)
|
|
{
|
|
enum hns3_fc_mode current_mode;
|
|
bool rx_pause = false;
|
|
bool tx_pause = false;
|
|
|
|
switch (hw->mac.media_type) {
|
|
case HNS3_MEDIA_TYPE_COPPER:
|
|
hns3_get_autoneg_rxtx_pause_copper(hw, &rx_pause, &tx_pause);
|
|
break;
|
|
|
|
/*
|
|
* Flow control auto-negotiation is not supported for fiber and
|
|
* backpalne media type.
|
|
*/
|
|
case HNS3_MEDIA_TYPE_FIBER:
|
|
case HNS3_MEDIA_TYPE_BACKPLANE:
|
|
hns3_err(hw, "autoneg FC mode can't be obtained, but flow control auto-negotiation is enabled.");
|
|
current_mode = hw->requested_fc_mode;
|
|
goto out;
|
|
default:
|
|
hns3_err(hw, "autoneg FC mode can't be obtained for unknown media type(%u).",
|
|
hw->mac.media_type);
|
|
current_mode = HNS3_FC_NONE;
|
|
goto out;
|
|
}
|
|
|
|
if (rx_pause && tx_pause)
|
|
current_mode = HNS3_FC_FULL;
|
|
else if (rx_pause)
|
|
current_mode = HNS3_FC_RX_PAUSE;
|
|
else if (tx_pause)
|
|
current_mode = HNS3_FC_TX_PAUSE;
|
|
else
|
|
current_mode = HNS3_FC_NONE;
|
|
|
|
out:
|
|
return current_mode;
|
|
}
|
|
|
|
static enum hns3_fc_mode
|
|
hns3_get_current_fc_mode(struct rte_eth_dev *dev)
|
|
{
|
|
struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
|
|
struct hns3_pf *pf = HNS3_DEV_PRIVATE_TO_PF(dev->data->dev_private);
|
|
struct hns3_mac *mac = &hw->mac;
|
|
|
|
/*
|
|
* When the flow control mode is obtained, the device may not complete
|
|
* auto-negotiation. It is necessary to wait for link establishment.
|
|
*/
|
|
(void)hns3_dev_link_update(dev, 1);
|
|
|
|
/*
|
|
* If the link auto-negotiation of the nic is disabled, or the flow
|
|
* control auto-negotiation is not supported, the forced flow control
|
|
* mode is used.
|
|
*/
|
|
if (mac->link_autoneg == 0 || !pf->support_fc_autoneg)
|
|
return hw->requested_fc_mode;
|
|
|
|
return hns3_get_autoneg_fc_mode(hw);
|
|
}
|
|
|
|
static int
|
|
hns3_flow_ctrl_get(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
|
|
{
|
|
struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
|
|
struct hns3_pf *pf = HNS3_DEV_PRIVATE_TO_PF(dev->data->dev_private);
|
|
enum hns3_fc_mode current_mode;
|
|
|
|
current_mode = hns3_get_current_fc_mode(dev);
|
|
switch (current_mode) {
|
|
case HNS3_FC_FULL:
|
|
fc_conf->mode = RTE_FC_FULL;
|
|
break;
|
|
case HNS3_FC_TX_PAUSE:
|
|
fc_conf->mode = RTE_FC_TX_PAUSE;
|
|
break;
|
|
case HNS3_FC_RX_PAUSE:
|
|
fc_conf->mode = RTE_FC_RX_PAUSE;
|
|
break;
|
|
case HNS3_FC_NONE:
|
|
default:
|
|
fc_conf->mode = RTE_FC_NONE;
|
|
break;
|
|
}
|
|
|
|
fc_conf->pause_time = pf->pause_time;
|
|
fc_conf->autoneg = pf->support_fc_autoneg ? hw->mac.link_autoneg : 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3_check_fc_autoneg_valid(struct hns3_hw *hw, uint8_t autoneg)
|
|
{
|
|
struct hns3_pf *pf = HNS3_DEV_HW_TO_PF(hw);
|
|
|
|
if (!pf->support_fc_autoneg) {
|
|
if (autoneg != 0) {
|
|
hns3_err(hw, "unsupported fc auto-negotiation setting.");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
/*
|
|
* Flow control auto-negotiation of the NIC is not supported,
|
|
* but other auto-negotiation features may be supported.
|
|
*/
|
|
if (autoneg != hw->mac.link_autoneg) {
|
|
hns3_err(hw, "please use 'link_speeds' in struct rte_eth_conf to disable autoneg!");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* If flow control auto-negotiation of the NIC is supported, all
|
|
* auto-negotiation features are supported.
|
|
*/
|
|
if (autoneg != hw->mac.link_autoneg) {
|
|
hns3_err(hw, "please use 'link_speeds' in struct rte_eth_conf to change autoneg!");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
|
|
{
|
|
struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
|
|
struct hns3_pf *pf = HNS3_DEV_PRIVATE_TO_PF(dev->data->dev_private);
|
|
int ret;
|
|
|
|
if (fc_conf->high_water || fc_conf->low_water ||
|
|
fc_conf->send_xon || fc_conf->mac_ctrl_frame_fwd) {
|
|
hns3_err(hw, "Unsupported flow control settings specified, "
|
|
"high_water(%u), low_water(%u), send_xon(%u) and "
|
|
"mac_ctrl_frame_fwd(%u) must be set to '0'",
|
|
fc_conf->high_water, fc_conf->low_water,
|
|
fc_conf->send_xon, fc_conf->mac_ctrl_frame_fwd);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = hns3_check_fc_autoneg_valid(hw, fc_conf->autoneg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!fc_conf->pause_time) {
|
|
hns3_err(hw, "Invalid pause time %u setting.",
|
|
fc_conf->pause_time);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!(hw->current_fc_status == HNS3_FC_STATUS_NONE ||
|
|
hw->current_fc_status == HNS3_FC_STATUS_MAC_PAUSE)) {
|
|
hns3_err(hw, "PFC is enabled. Cannot set MAC pause. "
|
|
"current_fc_status = %d", hw->current_fc_status);
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
if (hw->num_tc > 1 && !pf->support_multi_tc_pause) {
|
|
hns3_err(hw, "in multi-TC scenarios, MAC pause is not supported.");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
rte_spinlock_lock(&hw->lock);
|
|
ret = hns3_fc_enable(dev, fc_conf);
|
|
rte_spinlock_unlock(&hw->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_priority_flow_ctrl_set(struct rte_eth_dev *dev,
|
|
struct rte_eth_pfc_conf *pfc_conf)
|
|
{
|
|
struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
|
|
int ret;
|
|
|
|
if (!hns3_dev_dcb_supported(hw)) {
|
|
hns3_err(hw, "This port does not support dcb configurations.");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
if (pfc_conf->fc.high_water || pfc_conf->fc.low_water ||
|
|
pfc_conf->fc.send_xon || pfc_conf->fc.mac_ctrl_frame_fwd) {
|
|
hns3_err(hw, "Unsupported flow control settings specified, "
|
|
"high_water(%u), low_water(%u), send_xon(%u) and "
|
|
"mac_ctrl_frame_fwd(%u) must be set to '0'",
|
|
pfc_conf->fc.high_water, pfc_conf->fc.low_water,
|
|
pfc_conf->fc.send_xon,
|
|
pfc_conf->fc.mac_ctrl_frame_fwd);
|
|
return -EINVAL;
|
|
}
|
|
if (pfc_conf->fc.autoneg) {
|
|
hns3_err(hw, "Unsupported fc auto-negotiation setting.");
|
|
return -EINVAL;
|
|
}
|
|
if (pfc_conf->fc.pause_time == 0) {
|
|
hns3_err(hw, "Invalid pause time %u setting.",
|
|
pfc_conf->fc.pause_time);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!(hw->current_fc_status == HNS3_FC_STATUS_NONE ||
|
|
hw->current_fc_status == HNS3_FC_STATUS_PFC)) {
|
|
hns3_err(hw, "MAC pause is enabled. Cannot set PFC."
|
|
"current_fc_status = %d", hw->current_fc_status);
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
rte_spinlock_lock(&hw->lock);
|
|
ret = hns3_dcb_pfc_enable(dev, pfc_conf);
|
|
rte_spinlock_unlock(&hw->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_get_dcb_info(struct rte_eth_dev *dev, struct rte_eth_dcb_info *dcb_info)
|
|
{
|
|
struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
|
|
struct hns3_pf *pf = HNS3_DEV_PRIVATE_TO_PF(dev->data->dev_private);
|
|
enum rte_eth_rx_mq_mode mq_mode = dev->data->dev_conf.rxmode.mq_mode;
|
|
int i;
|
|
|
|
rte_spinlock_lock(&hw->lock);
|
|
if ((uint32_t)mq_mode & ETH_MQ_RX_DCB_FLAG)
|
|
dcb_info->nb_tcs = pf->local_max_tc;
|
|
else
|
|
dcb_info->nb_tcs = 1;
|
|
|
|
for (i = 0; i < HNS3_MAX_USER_PRIO; i++)
|
|
dcb_info->prio_tc[i] = hw->dcb_info.prio_tc[i];
|
|
for (i = 0; i < dcb_info->nb_tcs; i++)
|
|
dcb_info->tc_bws[i] = hw->dcb_info.pg_info[0].tc_dwrr[i];
|
|
|
|
for (i = 0; i < hw->num_tc; i++) {
|
|
dcb_info->tc_queue.tc_rxq[0][i].base = hw->alloc_rss_size * i;
|
|
dcb_info->tc_queue.tc_txq[0][i].base =
|
|
hw->tc_queue[i].tqp_offset;
|
|
dcb_info->tc_queue.tc_rxq[0][i].nb_queue = hw->alloc_rss_size;
|
|
dcb_info->tc_queue.tc_txq[0][i].nb_queue =
|
|
hw->tc_queue[i].tqp_count;
|
|
}
|
|
rte_spinlock_unlock(&hw->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3_reinit_dev(struct hns3_adapter *hns)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int ret;
|
|
|
|
ret = hns3_cmd_init(hw);
|
|
if (ret) {
|
|
hns3_err(hw, "Failed to init cmd: %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = hns3_reset_all_tqps(hns);
|
|
if (ret) {
|
|
hns3_err(hw, "Failed to reset all queues: %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = hns3_init_hardware(hns);
|
|
if (ret) {
|
|
hns3_err(hw, "Failed to init hardware: %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = hns3_enable_hw_error_intr(hns, true);
|
|
if (ret) {
|
|
hns3_err(hw, "fail to enable hw error interrupts: %d",
|
|
ret);
|
|
return ret;
|
|
}
|
|
hns3_info(hw, "Reset done, driver initialization finished.");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool
|
|
is_pf_reset_done(struct hns3_hw *hw)
|
|
{
|
|
uint32_t val, reg, reg_bit;
|
|
|
|
switch (hw->reset.level) {
|
|
case HNS3_IMP_RESET:
|
|
reg = HNS3_GLOBAL_RESET_REG;
|
|
reg_bit = HNS3_IMP_RESET_BIT;
|
|
break;
|
|
case HNS3_GLOBAL_RESET:
|
|
reg = HNS3_GLOBAL_RESET_REG;
|
|
reg_bit = HNS3_GLOBAL_RESET_BIT;
|
|
break;
|
|
case HNS3_FUNC_RESET:
|
|
reg = HNS3_FUN_RST_ING;
|
|
reg_bit = HNS3_FUN_RST_ING_B;
|
|
break;
|
|
case HNS3_FLR_RESET:
|
|
default:
|
|
hns3_err(hw, "Wait for unsupported reset level: %d",
|
|
hw->reset.level);
|
|
return true;
|
|
}
|
|
val = hns3_read_dev(hw, reg);
|
|
if (hns3_get_bit(val, reg_bit))
|
|
return false;
|
|
else
|
|
return true;
|
|
}
|
|
|
|
bool
|
|
hns3_is_reset_pending(struct hns3_adapter *hns)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
enum hns3_reset_level reset;
|
|
|
|
hns3_check_event_cause(hns, NULL);
|
|
reset = hns3_get_reset_level(hns, &hw->reset.pending);
|
|
if (reset != HNS3_NONE_RESET && hw->reset.level != HNS3_NONE_RESET &&
|
|
hw->reset.level < reset) {
|
|
hns3_warn(hw, "High level reset %d is pending", reset);
|
|
return true;
|
|
}
|
|
reset = hns3_get_reset_level(hns, &hw->reset.request);
|
|
if (reset != HNS3_NONE_RESET && hw->reset.level != HNS3_NONE_RESET &&
|
|
hw->reset.level < reset) {
|
|
hns3_warn(hw, "High level reset %d is request", reset);
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
static int
|
|
hns3_wait_hardware_ready(struct hns3_adapter *hns)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
struct hns3_wait_data *wait_data = hw->reset.wait_data;
|
|
struct timeval tv;
|
|
|
|
if (wait_data->result == HNS3_WAIT_SUCCESS)
|
|
return 0;
|
|
else if (wait_data->result == HNS3_WAIT_TIMEOUT) {
|
|
hns3_clock_gettime(&tv);
|
|
hns3_warn(hw, "Reset step4 hardware not ready after reset time=%ld.%.6ld",
|
|
tv.tv_sec, tv.tv_usec);
|
|
return -ETIME;
|
|
} else if (wait_data->result == HNS3_WAIT_REQUEST)
|
|
return -EAGAIN;
|
|
|
|
wait_data->hns = hns;
|
|
wait_data->check_completion = is_pf_reset_done;
|
|
wait_data->end_ms = (uint64_t)HNS3_RESET_WAIT_CNT *
|
|
HNS3_RESET_WAIT_MS + hns3_clock_gettime_ms();
|
|
wait_data->interval = HNS3_RESET_WAIT_MS * USEC_PER_MSEC;
|
|
wait_data->count = HNS3_RESET_WAIT_CNT;
|
|
wait_data->result = HNS3_WAIT_REQUEST;
|
|
rte_eal_alarm_set(wait_data->interval, hns3_wait_callback, wait_data);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
static int
|
|
hns3_func_reset_cmd(struct hns3_hw *hw, int func_id)
|
|
{
|
|
struct hns3_cmd_desc desc;
|
|
struct hns3_reset_cmd *req = (struct hns3_reset_cmd *)desc.data;
|
|
|
|
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_CFG_RST_TRIGGER, false);
|
|
hns3_set_bit(req->mac_func_reset, HNS3_CFG_RESET_FUNC_B, 1);
|
|
req->fun_reset_vfid = func_id;
|
|
|
|
return hns3_cmd_send(hw, &desc, 1);
|
|
}
|
|
|
|
static int
|
|
hns3_imp_reset_cmd(struct hns3_hw *hw)
|
|
{
|
|
struct hns3_cmd_desc desc;
|
|
|
|
hns3_cmd_setup_basic_desc(&desc, 0xFFFE, false);
|
|
desc.data[0] = 0xeedd;
|
|
|
|
return hns3_cmd_send(hw, &desc, 1);
|
|
}
|
|
|
|
static void
|
|
hns3_msix_process(struct hns3_adapter *hns, enum hns3_reset_level reset_level)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
struct timeval tv;
|
|
uint32_t val;
|
|
|
|
hns3_clock_gettime(&tv);
|
|
if (hns3_read_dev(hw, HNS3_GLOBAL_RESET_REG) ||
|
|
hns3_read_dev(hw, HNS3_FUN_RST_ING)) {
|
|
hns3_warn(hw, "Don't process msix during resetting time=%ld.%.6ld",
|
|
tv.tv_sec, tv.tv_usec);
|
|
return;
|
|
}
|
|
|
|
switch (reset_level) {
|
|
case HNS3_IMP_RESET:
|
|
hns3_imp_reset_cmd(hw);
|
|
hns3_warn(hw, "IMP Reset requested time=%ld.%.6ld",
|
|
tv.tv_sec, tv.tv_usec);
|
|
break;
|
|
case HNS3_GLOBAL_RESET:
|
|
val = hns3_read_dev(hw, HNS3_GLOBAL_RESET_REG);
|
|
hns3_set_bit(val, HNS3_GLOBAL_RESET_BIT, 1);
|
|
hns3_write_dev(hw, HNS3_GLOBAL_RESET_REG, val);
|
|
hns3_warn(hw, "Global Reset requested time=%ld.%.6ld",
|
|
tv.tv_sec, tv.tv_usec);
|
|
break;
|
|
case HNS3_FUNC_RESET:
|
|
hns3_warn(hw, "PF Reset requested time=%ld.%.6ld",
|
|
tv.tv_sec, tv.tv_usec);
|
|
/* schedule again to check later */
|
|
hns3_atomic_set_bit(HNS3_FUNC_RESET, &hw->reset.pending);
|
|
hns3_schedule_reset(hns);
|
|
break;
|
|
default:
|
|
hns3_warn(hw, "Unsupported reset level: %d", reset_level);
|
|
return;
|
|
}
|
|
hns3_atomic_clear_bit(reset_level, &hw->reset.request);
|
|
}
|
|
|
|
static enum hns3_reset_level
|
|
hns3_get_reset_level(struct hns3_adapter *hns, uint64_t *levels)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
enum hns3_reset_level reset_level = HNS3_NONE_RESET;
|
|
|
|
/* Return the highest priority reset level amongst all */
|
|
if (hns3_atomic_test_bit(HNS3_IMP_RESET, levels))
|
|
reset_level = HNS3_IMP_RESET;
|
|
else if (hns3_atomic_test_bit(HNS3_GLOBAL_RESET, levels))
|
|
reset_level = HNS3_GLOBAL_RESET;
|
|
else if (hns3_atomic_test_bit(HNS3_FUNC_RESET, levels))
|
|
reset_level = HNS3_FUNC_RESET;
|
|
else if (hns3_atomic_test_bit(HNS3_FLR_RESET, levels))
|
|
reset_level = HNS3_FLR_RESET;
|
|
|
|
if (hw->reset.level != HNS3_NONE_RESET && reset_level < hw->reset.level)
|
|
return HNS3_NONE_RESET;
|
|
|
|
return reset_level;
|
|
}
|
|
|
|
static void
|
|
hns3_record_imp_error(struct hns3_adapter *hns)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
uint32_t reg_val;
|
|
|
|
reg_val = hns3_read_dev(hw, HNS3_VECTOR0_OTER_EN_REG);
|
|
if (hns3_get_bit(reg_val, HNS3_VECTOR0_IMP_RD_POISON_B)) {
|
|
hns3_warn(hw, "Detected IMP RD poison!");
|
|
hns3_set_bit(reg_val, HNS3_VECTOR0_IMP_RD_POISON_B, 0);
|
|
hns3_write_dev(hw, HNS3_VECTOR0_OTER_EN_REG, reg_val);
|
|
}
|
|
|
|
if (hns3_get_bit(reg_val, HNS3_VECTOR0_IMP_CMDQ_ERR_B)) {
|
|
hns3_warn(hw, "Detected IMP CMDQ error!");
|
|
hns3_set_bit(reg_val, HNS3_VECTOR0_IMP_CMDQ_ERR_B, 0);
|
|
hns3_write_dev(hw, HNS3_VECTOR0_OTER_EN_REG, reg_val);
|
|
}
|
|
}
|
|
|
|
static int
|
|
hns3_prepare_reset(struct hns3_adapter *hns)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
uint32_t reg_val;
|
|
int ret;
|
|
|
|
switch (hw->reset.level) {
|
|
case HNS3_FUNC_RESET:
|
|
ret = hns3_func_reset_cmd(hw, HNS3_PF_FUNC_ID);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* After performaning pf reset, it is not necessary to do the
|
|
* mailbox handling or send any command to firmware, because
|
|
* any mailbox handling or command to firmware is only valid
|
|
* after hns3_cmd_init is called.
|
|
*/
|
|
__atomic_store_n(&hw->reset.disable_cmd, 1, __ATOMIC_RELAXED);
|
|
hw->reset.stats.request_cnt++;
|
|
break;
|
|
case HNS3_IMP_RESET:
|
|
hns3_record_imp_error(hns);
|
|
reg_val = hns3_read_dev(hw, HNS3_VECTOR0_OTER_EN_REG);
|
|
hns3_write_dev(hw, HNS3_VECTOR0_OTER_EN_REG, reg_val |
|
|
BIT(HNS3_VECTOR0_IMP_RESET_INT_B));
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3_set_rst_done(struct hns3_hw *hw)
|
|
{
|
|
struct hns3_pf_rst_done_cmd *req;
|
|
struct hns3_cmd_desc desc;
|
|
|
|
req = (struct hns3_pf_rst_done_cmd *)desc.data;
|
|
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_PF_RST_DONE, false);
|
|
req->pf_rst_done |= HNS3_PF_RESET_DONE_BIT;
|
|
return hns3_cmd_send(hw, &desc, 1);
|
|
}
|
|
|
|
static int
|
|
hns3_stop_service(struct hns3_adapter *hns)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
struct rte_eth_dev *eth_dev;
|
|
|
|
eth_dev = &rte_eth_devices[hw->data->port_id];
|
|
hw->mac.link_status = ETH_LINK_DOWN;
|
|
if (hw->adapter_state == HNS3_NIC_STARTED) {
|
|
rte_eal_alarm_cancel(hns3_service_handler, eth_dev);
|
|
hns3_update_linkstatus_and_event(hw, false);
|
|
}
|
|
|
|
hns3_set_rxtx_function(eth_dev);
|
|
rte_wmb();
|
|
/* Disable datapath on secondary process. */
|
|
hns3_mp_req_stop_rxtx(eth_dev);
|
|
rte_delay_ms(hw->cfg_max_queues);
|
|
|
|
rte_spinlock_lock(&hw->lock);
|
|
if (hns->hw.adapter_state == HNS3_NIC_STARTED ||
|
|
hw->adapter_state == HNS3_NIC_STOPPING) {
|
|
hns3_enable_all_queues(hw, false);
|
|
hns3_do_stop(hns);
|
|
hw->reset.mbuf_deferred_free = true;
|
|
} else
|
|
hw->reset.mbuf_deferred_free = false;
|
|
|
|
/*
|
|
* It is cumbersome for hardware to pick-and-choose entries for deletion
|
|
* from table space. Hence, for function reset software intervention is
|
|
* required to delete the entries
|
|
*/
|
|
if (__atomic_load_n(&hw->reset.disable_cmd, __ATOMIC_RELAXED) == 0)
|
|
hns3_configure_all_mc_mac_addr(hns, true);
|
|
rte_spinlock_unlock(&hw->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3_start_service(struct hns3_adapter *hns)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
struct rte_eth_dev *eth_dev;
|
|
|
|
if (hw->reset.level == HNS3_IMP_RESET ||
|
|
hw->reset.level == HNS3_GLOBAL_RESET)
|
|
hns3_set_rst_done(hw);
|
|
eth_dev = &rte_eth_devices[hw->data->port_id];
|
|
hns3_set_rxtx_function(eth_dev);
|
|
hns3_mp_req_start_rxtx(eth_dev);
|
|
if (hw->adapter_state == HNS3_NIC_STARTED) {
|
|
/*
|
|
* This API parent function already hold the hns3_hw.lock, the
|
|
* hns3_service_handler may report lse, in bonding application
|
|
* it will call driver's ops which may acquire the hns3_hw.lock
|
|
* again, thus lead to deadlock.
|
|
* We defer calls hns3_service_handler to avoid the deadlock.
|
|
*/
|
|
rte_eal_alarm_set(HNS3_SERVICE_QUICK_INTERVAL,
|
|
hns3_service_handler, eth_dev);
|
|
|
|
/* Enable interrupt of all rx queues before enabling queues */
|
|
hns3_dev_all_rx_queue_intr_enable(hw, true);
|
|
/*
|
|
* Enable state of each rxq and txq will be recovered after
|
|
* reset, so we need to restore them before enable all tqps;
|
|
*/
|
|
hns3_restore_tqp_enable_state(hw);
|
|
/*
|
|
* When finished the initialization, enable queues to receive
|
|
* and transmit packets.
|
|
*/
|
|
hns3_enable_all_queues(hw, true);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3_restore_conf(struct hns3_adapter *hns)
|
|
{
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int ret;
|
|
|
|
ret = hns3_configure_all_mac_addr(hns, false);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = hns3_configure_all_mc_mac_addr(hns, false);
|
|
if (ret)
|
|
goto err_mc_mac;
|
|
|
|
ret = hns3_dev_promisc_restore(hns);
|
|
if (ret)
|
|
goto err_promisc;
|
|
|
|
ret = hns3_restore_vlan_table(hns);
|
|
if (ret)
|
|
goto err_promisc;
|
|
|
|
ret = hns3_restore_vlan_conf(hns);
|
|
if (ret)
|
|
goto err_promisc;
|
|
|
|
ret = hns3_restore_all_fdir_filter(hns);
|
|
if (ret)
|
|
goto err_promisc;
|
|
|
|
ret = hns3_restore_ptp(hns);
|
|
if (ret)
|
|
goto err_promisc;
|
|
|
|
ret = hns3_restore_rx_interrupt(hw);
|
|
if (ret)
|
|
goto err_promisc;
|
|
|
|
ret = hns3_restore_gro_conf(hw);
|
|
if (ret)
|
|
goto err_promisc;
|
|
|
|
ret = hns3_restore_fec(hw);
|
|
if (ret)
|
|
goto err_promisc;
|
|
|
|
if (hns->hw.adapter_state == HNS3_NIC_STARTED) {
|
|
ret = hns3_do_start(hns, false);
|
|
if (ret)
|
|
goto err_promisc;
|
|
hns3_info(hw, "hns3 dev restart successful!");
|
|
} else if (hw->adapter_state == HNS3_NIC_STOPPING)
|
|
hw->adapter_state = HNS3_NIC_CONFIGURED;
|
|
return 0;
|
|
|
|
err_promisc:
|
|
hns3_configure_all_mc_mac_addr(hns, true);
|
|
err_mc_mac:
|
|
hns3_configure_all_mac_addr(hns, true);
|
|
return ret;
|
|
}
|
|
|
|
static void
|
|
hns3_reset_service(void *param)
|
|
{
|
|
struct hns3_adapter *hns = (struct hns3_adapter *)param;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
enum hns3_reset_level reset_level;
|
|
struct timeval tv_delta;
|
|
struct timeval tv_start;
|
|
struct timeval tv;
|
|
uint64_t msec;
|
|
int ret;
|
|
|
|
/*
|
|
* The interrupt is not triggered within the delay time.
|
|
* The interrupt may have been lost. It is necessary to handle
|
|
* the interrupt to recover from the error.
|
|
*/
|
|
if (__atomic_load_n(&hw->reset.schedule, __ATOMIC_RELAXED) ==
|
|
SCHEDULE_DEFERRED) {
|
|
__atomic_store_n(&hw->reset.schedule, SCHEDULE_REQUESTED,
|
|
__ATOMIC_RELAXED);
|
|
hns3_err(hw, "Handling interrupts in delayed tasks");
|
|
hns3_interrupt_handler(&rte_eth_devices[hw->data->port_id]);
|
|
reset_level = hns3_get_reset_level(hns, &hw->reset.pending);
|
|
if (reset_level == HNS3_NONE_RESET) {
|
|
hns3_err(hw, "No reset level is set, try IMP reset");
|
|
hns3_atomic_set_bit(HNS3_IMP_RESET, &hw->reset.pending);
|
|
}
|
|
}
|
|
__atomic_store_n(&hw->reset.schedule, SCHEDULE_NONE, __ATOMIC_RELAXED);
|
|
|
|
/*
|
|
* Check if there is any ongoing reset in the hardware. This status can
|
|
* be checked from reset_pending. If there is then, we need to wait for
|
|
* hardware to complete reset.
|
|
* a. If we are able to figure out in reasonable time that hardware
|
|
* has fully resetted then, we can proceed with driver, client
|
|
* reset.
|
|
* b. else, we can come back later to check this status so re-sched
|
|
* now.
|
|
*/
|
|
reset_level = hns3_get_reset_level(hns, &hw->reset.pending);
|
|
if (reset_level != HNS3_NONE_RESET) {
|
|
hns3_clock_gettime(&tv_start);
|
|
ret = hns3_reset_process(hns, reset_level);
|
|
hns3_clock_gettime(&tv);
|
|
timersub(&tv, &tv_start, &tv_delta);
|
|
msec = hns3_clock_calctime_ms(&tv_delta);
|
|
if (msec > HNS3_RESET_PROCESS_MS)
|
|
hns3_err(hw, "%d handle long time delta %" PRIu64
|
|
" ms time=%ld.%.6ld",
|
|
hw->reset.level, msec,
|
|
tv.tv_sec, tv.tv_usec);
|
|
if (ret == -EAGAIN)
|
|
return;
|
|
}
|
|
|
|
/* Check if we got any *new* reset requests to be honored */
|
|
reset_level = hns3_get_reset_level(hns, &hw->reset.request);
|
|
if (reset_level != HNS3_NONE_RESET)
|
|
hns3_msix_process(hns, reset_level);
|
|
}
|
|
|
|
static unsigned int
|
|
hns3_get_speed_capa_num(uint16_t device_id)
|
|
{
|
|
unsigned int num;
|
|
|
|
switch (device_id) {
|
|
case HNS3_DEV_ID_25GE:
|
|
case HNS3_DEV_ID_25GE_RDMA:
|
|
num = 2;
|
|
break;
|
|
case HNS3_DEV_ID_100G_RDMA_MACSEC:
|
|
case HNS3_DEV_ID_200G_RDMA:
|
|
num = 1;
|
|
break;
|
|
default:
|
|
num = 0;
|
|
break;
|
|
}
|
|
|
|
return num;
|
|
}
|
|
|
|
static int
|
|
hns3_get_speed_fec_capa(struct rte_eth_fec_capa *speed_fec_capa,
|
|
uint16_t device_id)
|
|
{
|
|
switch (device_id) {
|
|
case HNS3_DEV_ID_25GE:
|
|
/* fallthrough */
|
|
case HNS3_DEV_ID_25GE_RDMA:
|
|
speed_fec_capa[0].speed = speed_fec_capa_tbl[1].speed;
|
|
speed_fec_capa[0].capa = speed_fec_capa_tbl[1].capa;
|
|
|
|
/* In HNS3 device, the 25G NIC is compatible with 10G rate */
|
|
speed_fec_capa[1].speed = speed_fec_capa_tbl[0].speed;
|
|
speed_fec_capa[1].capa = speed_fec_capa_tbl[0].capa;
|
|
break;
|
|
case HNS3_DEV_ID_100G_RDMA_MACSEC:
|
|
speed_fec_capa[0].speed = speed_fec_capa_tbl[4].speed;
|
|
speed_fec_capa[0].capa = speed_fec_capa_tbl[4].capa;
|
|
break;
|
|
case HNS3_DEV_ID_200G_RDMA:
|
|
speed_fec_capa[0].speed = speed_fec_capa_tbl[5].speed;
|
|
speed_fec_capa[0].capa = speed_fec_capa_tbl[5].capa;
|
|
break;
|
|
default:
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3_fec_get_capability(struct rte_eth_dev *dev,
|
|
struct rte_eth_fec_capa *speed_fec_capa,
|
|
unsigned int num)
|
|
{
|
|
struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
|
|
struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
|
|
uint16_t device_id = pci_dev->id.device_id;
|
|
unsigned int capa_num;
|
|
int ret;
|
|
|
|
capa_num = hns3_get_speed_capa_num(device_id);
|
|
if (capa_num == 0) {
|
|
hns3_err(hw, "device(0x%x) is not supported by hns3 PMD",
|
|
device_id);
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
if (speed_fec_capa == NULL || num < capa_num)
|
|
return capa_num;
|
|
|
|
ret = hns3_get_speed_fec_capa(speed_fec_capa, device_id);
|
|
if (ret)
|
|
return -ENOTSUP;
|
|
|
|
return capa_num;
|
|
}
|
|
|
|
static int
|
|
get_current_fec_auto_state(struct hns3_hw *hw, uint8_t *state)
|
|
{
|
|
struct hns3_config_fec_cmd *req;
|
|
struct hns3_cmd_desc desc;
|
|
int ret;
|
|
|
|
/*
|
|
* CMD(HNS3_OPC_CONFIG_FEC_MODE) read is not supported
|
|
* in device of link speed
|
|
* below 10 Gbps.
|
|
*/
|
|
if (hw->mac.link_speed < ETH_SPEED_NUM_10G) {
|
|
*state = 0;
|
|
return 0;
|
|
}
|
|
|
|
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_CONFIG_FEC_MODE, true);
|
|
req = (struct hns3_config_fec_cmd *)desc.data;
|
|
ret = hns3_cmd_send(hw, &desc, 1);
|
|
if (ret) {
|
|
hns3_err(hw, "get current fec auto state failed, ret = %d",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
*state = req->fec_mode & (1U << HNS3_MAC_CFG_FEC_AUTO_EN_B);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3_fec_get_internal(struct hns3_hw *hw, uint32_t *fec_capa)
|
|
{
|
|
struct hns3_sfp_info_cmd *resp;
|
|
uint32_t tmp_fec_capa;
|
|
uint8_t auto_state;
|
|
struct hns3_cmd_desc desc;
|
|
int ret;
|
|
|
|
/*
|
|
* If link is down and AUTO is enabled, AUTO is returned, otherwise,
|
|
* configured FEC mode is returned.
|
|
* If link is up, current FEC mode is returned.
|
|
*/
|
|
if (hw->mac.link_status == ETH_LINK_DOWN) {
|
|
ret = get_current_fec_auto_state(hw, &auto_state);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (auto_state == 0x1) {
|
|
*fec_capa = RTE_ETH_FEC_MODE_CAPA_MASK(AUTO);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_GET_SFP_INFO, true);
|
|
resp = (struct hns3_sfp_info_cmd *)desc.data;
|
|
resp->query_type = HNS3_ACTIVE_QUERY;
|
|
|
|
ret = hns3_cmd_send(hw, &desc, 1);
|
|
if (ret == -EOPNOTSUPP) {
|
|
hns3_err(hw, "IMP do not support get FEC, ret = %d", ret);
|
|
return ret;
|
|
} else if (ret) {
|
|
hns3_err(hw, "get FEC failed, ret = %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* FEC mode order defined in hns3 hardware is inconsistend with
|
|
* that defined in the ethdev library. So the sequence needs
|
|
* to be converted.
|
|
*/
|
|
switch (resp->active_fec) {
|
|
case HNS3_HW_FEC_MODE_NOFEC:
|
|
tmp_fec_capa = RTE_ETH_FEC_MODE_CAPA_MASK(NOFEC);
|
|
break;
|
|
case HNS3_HW_FEC_MODE_BASER:
|
|
tmp_fec_capa = RTE_ETH_FEC_MODE_CAPA_MASK(BASER);
|
|
break;
|
|
case HNS3_HW_FEC_MODE_RS:
|
|
tmp_fec_capa = RTE_ETH_FEC_MODE_CAPA_MASK(RS);
|
|
break;
|
|
default:
|
|
tmp_fec_capa = RTE_ETH_FEC_MODE_CAPA_MASK(NOFEC);
|
|
break;
|
|
}
|
|
|
|
*fec_capa = tmp_fec_capa;
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3_fec_get(struct rte_eth_dev *dev, uint32_t *fec_capa)
|
|
{
|
|
struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
|
|
|
|
return hns3_fec_get_internal(hw, fec_capa);
|
|
}
|
|
|
|
static int
|
|
hns3_set_fec_hw(struct hns3_hw *hw, uint32_t mode)
|
|
{
|
|
struct hns3_config_fec_cmd *req;
|
|
struct hns3_cmd_desc desc;
|
|
int ret;
|
|
|
|
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_CONFIG_FEC_MODE, false);
|
|
|
|
req = (struct hns3_config_fec_cmd *)desc.data;
|
|
switch (mode) {
|
|
case RTE_ETH_FEC_MODE_CAPA_MASK(NOFEC):
|
|
hns3_set_field(req->fec_mode, HNS3_MAC_CFG_FEC_MODE_M,
|
|
HNS3_MAC_CFG_FEC_MODE_S, HNS3_MAC_FEC_OFF);
|
|
break;
|
|
case RTE_ETH_FEC_MODE_CAPA_MASK(BASER):
|
|
hns3_set_field(req->fec_mode, HNS3_MAC_CFG_FEC_MODE_M,
|
|
HNS3_MAC_CFG_FEC_MODE_S, HNS3_MAC_FEC_BASER);
|
|
break;
|
|
case RTE_ETH_FEC_MODE_CAPA_MASK(RS):
|
|
hns3_set_field(req->fec_mode, HNS3_MAC_CFG_FEC_MODE_M,
|
|
HNS3_MAC_CFG_FEC_MODE_S, HNS3_MAC_FEC_RS);
|
|
break;
|
|
case RTE_ETH_FEC_MODE_CAPA_MASK(AUTO):
|
|
hns3_set_bit(req->fec_mode, HNS3_MAC_CFG_FEC_AUTO_EN_B, 1);
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
ret = hns3_cmd_send(hw, &desc, 1);
|
|
if (ret)
|
|
hns3_err(hw, "set fec mode failed, ret = %d", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static uint32_t
|
|
get_current_speed_fec_cap(struct hns3_hw *hw, struct rte_eth_fec_capa *fec_capa)
|
|
{
|
|
struct hns3_mac *mac = &hw->mac;
|
|
uint32_t cur_capa;
|
|
|
|
switch (mac->link_speed) {
|
|
case ETH_SPEED_NUM_10G:
|
|
cur_capa = fec_capa[1].capa;
|
|
break;
|
|
case ETH_SPEED_NUM_25G:
|
|
case ETH_SPEED_NUM_100G:
|
|
case ETH_SPEED_NUM_200G:
|
|
cur_capa = fec_capa[0].capa;
|
|
break;
|
|
default:
|
|
cur_capa = 0;
|
|
break;
|
|
}
|
|
|
|
return cur_capa;
|
|
}
|
|
|
|
static bool
|
|
is_fec_mode_one_bit_set(uint32_t mode)
|
|
{
|
|
int cnt = 0;
|
|
uint8_t i;
|
|
|
|
for (i = 0; i < sizeof(mode); i++)
|
|
if (mode >> i & 0x1)
|
|
cnt++;
|
|
|
|
return cnt == 1 ? true : false;
|
|
}
|
|
|
|
static int
|
|
hns3_fec_set(struct rte_eth_dev *dev, uint32_t mode)
|
|
{
|
|
#define FEC_CAPA_NUM 2
|
|
struct hns3_adapter *hns = dev->data->dev_private;
|
|
struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(hns);
|
|
struct hns3_pf *pf = &hns->pf;
|
|
|
|
struct rte_eth_fec_capa fec_capa[FEC_CAPA_NUM];
|
|
uint32_t cur_capa;
|
|
uint32_t num = FEC_CAPA_NUM;
|
|
int ret;
|
|
|
|
ret = hns3_fec_get_capability(dev, fec_capa, num);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* HNS3 PMD driver only support one bit set mode, e.g. 0x1, 0x4 */
|
|
if (!is_fec_mode_one_bit_set(mode)) {
|
|
hns3_err(hw, "FEC mode(0x%x) not supported in HNS3 PMD, "
|
|
"FEC mode should be only one bit set", mode);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* Check whether the configured mode is within the FEC capability.
|
|
* If not, the configured mode will not be supported.
|
|
*/
|
|
cur_capa = get_current_speed_fec_cap(hw, fec_capa);
|
|
if (!(cur_capa & mode)) {
|
|
hns3_err(hw, "unsupported FEC mode = 0x%x", mode);
|
|
return -EINVAL;
|
|
}
|
|
|
|
rte_spinlock_lock(&hw->lock);
|
|
ret = hns3_set_fec_hw(hw, mode);
|
|
if (ret) {
|
|
rte_spinlock_unlock(&hw->lock);
|
|
return ret;
|
|
}
|
|
|
|
pf->fec_mode = mode;
|
|
rte_spinlock_unlock(&hw->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3_restore_fec(struct hns3_hw *hw)
|
|
{
|
|
struct hns3_adapter *hns = HNS3_DEV_HW_TO_ADAPTER(hw);
|
|
struct hns3_pf *pf = &hns->pf;
|
|
uint32_t mode = pf->fec_mode;
|
|
int ret;
|
|
|
|
ret = hns3_set_fec_hw(hw, mode);
|
|
if (ret)
|
|
hns3_err(hw, "restore fec mode(0x%x) failed, ret = %d",
|
|
mode, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_query_dev_fec_info(struct hns3_hw *hw)
|
|
{
|
|
struct hns3_adapter *hns = HNS3_DEV_HW_TO_ADAPTER(hw);
|
|
struct hns3_pf *pf = HNS3_DEV_PRIVATE_TO_PF(hns);
|
|
int ret;
|
|
|
|
ret = hns3_fec_get_internal(hw, &pf->fec_mode);
|
|
if (ret)
|
|
hns3_err(hw, "query device FEC info failed, ret = %d", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static bool
|
|
hns3_optical_module_existed(struct hns3_hw *hw)
|
|
{
|
|
struct hns3_cmd_desc desc;
|
|
bool existed;
|
|
int ret;
|
|
|
|
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_GET_SFP_EXIST, true);
|
|
ret = hns3_cmd_send(hw, &desc, 1);
|
|
if (ret) {
|
|
hns3_err(hw,
|
|
"fail to get optical module exist state, ret = %d.\n",
|
|
ret);
|
|
return false;
|
|
}
|
|
existed = !!desc.data[0];
|
|
|
|
return existed;
|
|
}
|
|
|
|
static int
|
|
hns3_get_module_eeprom_data(struct hns3_hw *hw, uint32_t offset,
|
|
uint32_t len, uint8_t *data)
|
|
{
|
|
#define HNS3_SFP_INFO_CMD_NUM 6
|
|
#define HNS3_SFP_INFO_MAX_LEN \
|
|
(HNS3_SFP_INFO_BD0_LEN + \
|
|
(HNS3_SFP_INFO_CMD_NUM - 1) * HNS3_SFP_INFO_BDX_LEN)
|
|
struct hns3_cmd_desc desc[HNS3_SFP_INFO_CMD_NUM];
|
|
struct hns3_sfp_info_bd0_cmd *sfp_info_bd0;
|
|
uint16_t read_len;
|
|
uint16_t copy_len;
|
|
int ret;
|
|
int i;
|
|
|
|
for (i = 0; i < HNS3_SFP_INFO_CMD_NUM; i++) {
|
|
hns3_cmd_setup_basic_desc(&desc[i], HNS3_OPC_GET_SFP_EEPROM,
|
|
true);
|
|
if (i < HNS3_SFP_INFO_CMD_NUM - 1)
|
|
desc[i].flag |= rte_cpu_to_le_16(HNS3_CMD_FLAG_NEXT);
|
|
}
|
|
|
|
sfp_info_bd0 = (struct hns3_sfp_info_bd0_cmd *)desc[0].data;
|
|
sfp_info_bd0->offset = rte_cpu_to_le_16((uint16_t)offset);
|
|
read_len = RTE_MIN(len, HNS3_SFP_INFO_MAX_LEN);
|
|
sfp_info_bd0->read_len = rte_cpu_to_le_16((uint16_t)read_len);
|
|
|
|
ret = hns3_cmd_send(hw, desc, HNS3_SFP_INFO_CMD_NUM);
|
|
if (ret) {
|
|
hns3_err(hw, "fail to get module EEPROM info, ret = %d.\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
/* The data format in BD0 is different with the others. */
|
|
copy_len = RTE_MIN(len, HNS3_SFP_INFO_BD0_LEN);
|
|
memcpy(data, sfp_info_bd0->data, copy_len);
|
|
read_len = copy_len;
|
|
|
|
for (i = 1; i < HNS3_SFP_INFO_CMD_NUM; i++) {
|
|
if (read_len >= len)
|
|
break;
|
|
|
|
copy_len = RTE_MIN(len - read_len, HNS3_SFP_INFO_BDX_LEN);
|
|
memcpy(data + read_len, desc[i].data, copy_len);
|
|
read_len += copy_len;
|
|
}
|
|
|
|
return (int)read_len;
|
|
}
|
|
|
|
static int
|
|
hns3_get_module_eeprom(struct rte_eth_dev *dev,
|
|
struct rte_dev_eeprom_info *info)
|
|
{
|
|
struct hns3_adapter *hns = dev->data->dev_private;
|
|
struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(hns);
|
|
uint32_t offset = info->offset;
|
|
uint32_t len = info->length;
|
|
uint8_t *data = info->data;
|
|
uint32_t read_len = 0;
|
|
|
|
if (hw->mac.media_type != HNS3_MEDIA_TYPE_FIBER)
|
|
return -ENOTSUP;
|
|
|
|
if (!hns3_optical_module_existed(hw)) {
|
|
hns3_err(hw, "fail to read module EEPROM: no module is connected.\n");
|
|
return -EIO;
|
|
}
|
|
|
|
while (read_len < len) {
|
|
int ret;
|
|
ret = hns3_get_module_eeprom_data(hw, offset + read_len,
|
|
len - read_len,
|
|
data + read_len);
|
|
if (ret < 0)
|
|
return -EIO;
|
|
read_len += ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
hns3_get_module_info(struct rte_eth_dev *dev,
|
|
struct rte_eth_dev_module_info *modinfo)
|
|
{
|
|
#define HNS3_SFF8024_ID_SFP 0x03
|
|
#define HNS3_SFF8024_ID_QSFP_8438 0x0c
|
|
#define HNS3_SFF8024_ID_QSFP_8436_8636 0x0d
|
|
#define HNS3_SFF8024_ID_QSFP28_8636 0x11
|
|
#define HNS3_SFF_8636_V1_3 0x03
|
|
struct hns3_adapter *hns = dev->data->dev_private;
|
|
struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(hns);
|
|
struct rte_dev_eeprom_info info;
|
|
struct hns3_sfp_type sfp_type;
|
|
int ret;
|
|
|
|
memset(&sfp_type, 0, sizeof(sfp_type));
|
|
memset(&info, 0, sizeof(info));
|
|
info.data = (uint8_t *)&sfp_type;
|
|
info.length = sizeof(sfp_type);
|
|
ret = hns3_get_module_eeprom(dev, &info);
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (sfp_type.type) {
|
|
case HNS3_SFF8024_ID_SFP:
|
|
modinfo->type = RTE_ETH_MODULE_SFF_8472;
|
|
modinfo->eeprom_len = RTE_ETH_MODULE_SFF_8472_LEN;
|
|
break;
|
|
case HNS3_SFF8024_ID_QSFP_8438:
|
|
modinfo->type = RTE_ETH_MODULE_SFF_8436;
|
|
modinfo->eeprom_len = RTE_ETH_MODULE_SFF_8436_MAX_LEN;
|
|
break;
|
|
case HNS3_SFF8024_ID_QSFP_8436_8636:
|
|
if (sfp_type.ext_type < HNS3_SFF_8636_V1_3) {
|
|
modinfo->type = RTE_ETH_MODULE_SFF_8436;
|
|
modinfo->eeprom_len = RTE_ETH_MODULE_SFF_8436_MAX_LEN;
|
|
} else {
|
|
modinfo->type = RTE_ETH_MODULE_SFF_8636;
|
|
modinfo->eeprom_len = RTE_ETH_MODULE_SFF_8636_MAX_LEN;
|
|
}
|
|
break;
|
|
case HNS3_SFF8024_ID_QSFP28_8636:
|
|
modinfo->type = RTE_ETH_MODULE_SFF_8636;
|
|
modinfo->eeprom_len = RTE_ETH_MODULE_SFF_8636_MAX_LEN;
|
|
break;
|
|
default:
|
|
hns3_err(hw, "unknown module, type = %u, extra_type = %u.\n",
|
|
sfp_type.type, sfp_type.ext_type);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void
|
|
hns3_clock_gettime(struct timeval *tv)
|
|
{
|
|
#ifdef CLOCK_MONOTONIC_RAW /* Defined in glibc bits/time.h */
|
|
#define CLOCK_TYPE CLOCK_MONOTONIC_RAW
|
|
#else
|
|
#define CLOCK_TYPE CLOCK_MONOTONIC
|
|
#endif
|
|
#define NSEC_TO_USEC_DIV 1000
|
|
|
|
struct timespec spec;
|
|
(void)clock_gettime(CLOCK_TYPE, &spec);
|
|
|
|
tv->tv_sec = spec.tv_sec;
|
|
tv->tv_usec = spec.tv_nsec / NSEC_TO_USEC_DIV;
|
|
}
|
|
|
|
uint64_t
|
|
hns3_clock_calctime_ms(struct timeval *tv)
|
|
{
|
|
return (uint64_t)tv->tv_sec * MSEC_PER_SEC +
|
|
tv->tv_usec / USEC_PER_MSEC;
|
|
}
|
|
|
|
uint64_t
|
|
hns3_clock_gettime_ms(void)
|
|
{
|
|
struct timeval tv;
|
|
|
|
hns3_clock_gettime(&tv);
|
|
return hns3_clock_calctime_ms(&tv);
|
|
}
|
|
|
|
static int
|
|
hns3_parse_io_hint_func(const char *key, const char *value, void *extra_args)
|
|
{
|
|
uint32_t hint = HNS3_IO_FUNC_HINT_NONE;
|
|
|
|
RTE_SET_USED(key);
|
|
|
|
if (strcmp(value, "vec") == 0)
|
|
hint = HNS3_IO_FUNC_HINT_VEC;
|
|
else if (strcmp(value, "sve") == 0)
|
|
hint = HNS3_IO_FUNC_HINT_SVE;
|
|
else if (strcmp(value, "simple") == 0)
|
|
hint = HNS3_IO_FUNC_HINT_SIMPLE;
|
|
else if (strcmp(value, "common") == 0)
|
|
hint = HNS3_IO_FUNC_HINT_COMMON;
|
|
|
|
/* If the hint is valid then update output parameters */
|
|
if (hint != HNS3_IO_FUNC_HINT_NONE)
|
|
*(uint32_t *)extra_args = hint;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const char *
|
|
hns3_get_io_hint_func_name(uint32_t hint)
|
|
{
|
|
switch (hint) {
|
|
case HNS3_IO_FUNC_HINT_VEC:
|
|
return "vec";
|
|
case HNS3_IO_FUNC_HINT_SVE:
|
|
return "sve";
|
|
case HNS3_IO_FUNC_HINT_SIMPLE:
|
|
return "simple";
|
|
case HNS3_IO_FUNC_HINT_COMMON:
|
|
return "common";
|
|
default:
|
|
return "none";
|
|
}
|
|
}
|
|
|
|
static int
|
|
hns3_parse_dev_caps_mask(const char *key, const char *value, void *extra_args)
|
|
{
|
|
uint64_t val;
|
|
|
|
RTE_SET_USED(key);
|
|
|
|
val = strtoull(value, NULL, 16);
|
|
*(uint64_t *)extra_args = val;
|
|
|
|
return 0;
|
|
}
|
|
|
|
void
|
|
hns3_parse_devargs(struct rte_eth_dev *dev)
|
|
{
|
|
struct hns3_adapter *hns = dev->data->dev_private;
|
|
uint32_t rx_func_hint = HNS3_IO_FUNC_HINT_NONE;
|
|
uint32_t tx_func_hint = HNS3_IO_FUNC_HINT_NONE;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
uint64_t dev_caps_mask = 0;
|
|
struct rte_kvargs *kvlist;
|
|
|
|
if (dev->device->devargs == NULL)
|
|
return;
|
|
|
|
kvlist = rte_kvargs_parse(dev->device->devargs->args, NULL);
|
|
if (!kvlist)
|
|
return;
|
|
|
|
(void)rte_kvargs_process(kvlist, HNS3_DEVARG_RX_FUNC_HINT,
|
|
&hns3_parse_io_hint_func, &rx_func_hint);
|
|
(void)rte_kvargs_process(kvlist, HNS3_DEVARG_TX_FUNC_HINT,
|
|
&hns3_parse_io_hint_func, &tx_func_hint);
|
|
(void)rte_kvargs_process(kvlist, HNS3_DEVARG_DEV_CAPS_MASK,
|
|
&hns3_parse_dev_caps_mask, &dev_caps_mask);
|
|
rte_kvargs_free(kvlist);
|
|
|
|
if (rx_func_hint != HNS3_IO_FUNC_HINT_NONE)
|
|
hns3_warn(hw, "parsed %s = %s.", HNS3_DEVARG_RX_FUNC_HINT,
|
|
hns3_get_io_hint_func_name(rx_func_hint));
|
|
hns->rx_func_hint = rx_func_hint;
|
|
if (tx_func_hint != HNS3_IO_FUNC_HINT_NONE)
|
|
hns3_warn(hw, "parsed %s = %s.", HNS3_DEVARG_TX_FUNC_HINT,
|
|
hns3_get_io_hint_func_name(tx_func_hint));
|
|
hns->tx_func_hint = tx_func_hint;
|
|
|
|
if (dev_caps_mask != 0)
|
|
hns3_warn(hw, "parsed %s = 0x%" PRIx64 ".",
|
|
HNS3_DEVARG_DEV_CAPS_MASK, dev_caps_mask);
|
|
hns->dev_caps_mask = dev_caps_mask;
|
|
}
|
|
|
|
static const struct eth_dev_ops hns3_eth_dev_ops = {
|
|
.dev_configure = hns3_dev_configure,
|
|
.dev_start = hns3_dev_start,
|
|
.dev_stop = hns3_dev_stop,
|
|
.dev_close = hns3_dev_close,
|
|
.promiscuous_enable = hns3_dev_promiscuous_enable,
|
|
.promiscuous_disable = hns3_dev_promiscuous_disable,
|
|
.allmulticast_enable = hns3_dev_allmulticast_enable,
|
|
.allmulticast_disable = hns3_dev_allmulticast_disable,
|
|
.mtu_set = hns3_dev_mtu_set,
|
|
.stats_get = hns3_stats_get,
|
|
.stats_reset = hns3_stats_reset,
|
|
.xstats_get = hns3_dev_xstats_get,
|
|
.xstats_get_names = hns3_dev_xstats_get_names,
|
|
.xstats_reset = hns3_dev_xstats_reset,
|
|
.xstats_get_by_id = hns3_dev_xstats_get_by_id,
|
|
.xstats_get_names_by_id = hns3_dev_xstats_get_names_by_id,
|
|
.dev_infos_get = hns3_dev_infos_get,
|
|
.fw_version_get = hns3_fw_version_get,
|
|
.rx_queue_setup = hns3_rx_queue_setup,
|
|
.tx_queue_setup = hns3_tx_queue_setup,
|
|
.rx_queue_release = hns3_dev_rx_queue_release,
|
|
.tx_queue_release = hns3_dev_tx_queue_release,
|
|
.rx_queue_start = hns3_dev_rx_queue_start,
|
|
.rx_queue_stop = hns3_dev_rx_queue_stop,
|
|
.tx_queue_start = hns3_dev_tx_queue_start,
|
|
.tx_queue_stop = hns3_dev_tx_queue_stop,
|
|
.rx_queue_intr_enable = hns3_dev_rx_queue_intr_enable,
|
|
.rx_queue_intr_disable = hns3_dev_rx_queue_intr_disable,
|
|
.rxq_info_get = hns3_rxq_info_get,
|
|
.txq_info_get = hns3_txq_info_get,
|
|
.rx_burst_mode_get = hns3_rx_burst_mode_get,
|
|
.tx_burst_mode_get = hns3_tx_burst_mode_get,
|
|
.flow_ctrl_get = hns3_flow_ctrl_get,
|
|
.flow_ctrl_set = hns3_flow_ctrl_set,
|
|
.priority_flow_ctrl_set = hns3_priority_flow_ctrl_set,
|
|
.mac_addr_add = hns3_add_mac_addr,
|
|
.mac_addr_remove = hns3_remove_mac_addr,
|
|
.mac_addr_set = hns3_set_default_mac_addr,
|
|
.set_mc_addr_list = hns3_set_mc_mac_addr_list,
|
|
.link_update = hns3_dev_link_update,
|
|
.rss_hash_update = hns3_dev_rss_hash_update,
|
|
.rss_hash_conf_get = hns3_dev_rss_hash_conf_get,
|
|
.reta_update = hns3_dev_rss_reta_update,
|
|
.reta_query = hns3_dev_rss_reta_query,
|
|
.flow_ops_get = hns3_dev_flow_ops_get,
|
|
.vlan_filter_set = hns3_vlan_filter_set,
|
|
.vlan_tpid_set = hns3_vlan_tpid_set,
|
|
.vlan_offload_set = hns3_vlan_offload_set,
|
|
.vlan_pvid_set = hns3_vlan_pvid_set,
|
|
.get_reg = hns3_get_regs,
|
|
.get_module_info = hns3_get_module_info,
|
|
.get_module_eeprom = hns3_get_module_eeprom,
|
|
.get_dcb_info = hns3_get_dcb_info,
|
|
.dev_supported_ptypes_get = hns3_dev_supported_ptypes_get,
|
|
.fec_get_capability = hns3_fec_get_capability,
|
|
.fec_get = hns3_fec_get,
|
|
.fec_set = hns3_fec_set,
|
|
.tm_ops_get = hns3_tm_ops_get,
|
|
.tx_done_cleanup = hns3_tx_done_cleanup,
|
|
.timesync_enable = hns3_timesync_enable,
|
|
.timesync_disable = hns3_timesync_disable,
|
|
.timesync_read_rx_timestamp = hns3_timesync_read_rx_timestamp,
|
|
.timesync_read_tx_timestamp = hns3_timesync_read_tx_timestamp,
|
|
.timesync_adjust_time = hns3_timesync_adjust_time,
|
|
.timesync_read_time = hns3_timesync_read_time,
|
|
.timesync_write_time = hns3_timesync_write_time,
|
|
};
|
|
|
|
static const struct hns3_reset_ops hns3_reset_ops = {
|
|
.reset_service = hns3_reset_service,
|
|
.stop_service = hns3_stop_service,
|
|
.prepare_reset = hns3_prepare_reset,
|
|
.wait_hardware_ready = hns3_wait_hardware_ready,
|
|
.reinit_dev = hns3_reinit_dev,
|
|
.restore_conf = hns3_restore_conf,
|
|
.start_service = hns3_start_service,
|
|
};
|
|
|
|
static int
|
|
hns3_dev_init(struct rte_eth_dev *eth_dev)
|
|
{
|
|
struct hns3_adapter *hns = eth_dev->data->dev_private;
|
|
char mac_str[RTE_ETHER_ADDR_FMT_SIZE];
|
|
struct rte_ether_addr *eth_addr;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
int ret;
|
|
|
|
PMD_INIT_FUNC_TRACE();
|
|
|
|
eth_dev->process_private = (struct hns3_process_private *)
|
|
rte_zmalloc_socket("hns3_filter_list",
|
|
sizeof(struct hns3_process_private),
|
|
RTE_CACHE_LINE_SIZE, eth_dev->device->numa_node);
|
|
if (eth_dev->process_private == NULL) {
|
|
PMD_INIT_LOG(ERR, "Failed to alloc memory for process private");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
hns3_flow_init(eth_dev);
|
|
|
|
hns3_set_rxtx_function(eth_dev);
|
|
eth_dev->dev_ops = &hns3_eth_dev_ops;
|
|
eth_dev->rx_queue_count = hns3_rx_queue_count;
|
|
if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
|
|
ret = hns3_mp_init_secondary();
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "Failed to init for secondary "
|
|
"process, ret = %d", ret);
|
|
goto err_mp_init_secondary;
|
|
}
|
|
hw->secondary_cnt++;
|
|
hns3_tx_push_init(eth_dev);
|
|
return 0;
|
|
}
|
|
|
|
ret = hns3_mp_init_primary();
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR,
|
|
"Failed to init for primary process, ret = %d",
|
|
ret);
|
|
goto err_mp_init_primary;
|
|
}
|
|
|
|
hw->adapter_state = HNS3_NIC_UNINITIALIZED;
|
|
hns->is_vf = false;
|
|
hw->data = eth_dev->data;
|
|
hns3_parse_devargs(eth_dev);
|
|
|
|
/*
|
|
* Set default max packet size according to the mtu
|
|
* default vale in DPDK frame.
|
|
*/
|
|
hns->pf.mps = hw->data->mtu + HNS3_ETH_OVERHEAD;
|
|
|
|
ret = hns3_reset_init(hw);
|
|
if (ret)
|
|
goto err_init_reset;
|
|
hw->reset.ops = &hns3_reset_ops;
|
|
|
|
ret = hns3_init_pf(eth_dev);
|
|
if (ret) {
|
|
PMD_INIT_LOG(ERR, "Failed to init pf: %d", ret);
|
|
goto err_init_pf;
|
|
}
|
|
|
|
/* Allocate memory for storing MAC addresses */
|
|
eth_dev->data->mac_addrs = rte_zmalloc("hns3-mac",
|
|
sizeof(struct rte_ether_addr) *
|
|
HNS3_UC_MACADDR_NUM, 0);
|
|
if (eth_dev->data->mac_addrs == NULL) {
|
|
PMD_INIT_LOG(ERR, "Failed to allocate %zx bytes needed "
|
|
"to store MAC addresses",
|
|
sizeof(struct rte_ether_addr) *
|
|
HNS3_UC_MACADDR_NUM);
|
|
ret = -ENOMEM;
|
|
goto err_rte_zmalloc;
|
|
}
|
|
|
|
eth_addr = (struct rte_ether_addr *)hw->mac.mac_addr;
|
|
if (!rte_is_valid_assigned_ether_addr(eth_addr)) {
|
|
rte_eth_random_addr(hw->mac.mac_addr);
|
|
hns3_ether_format_addr(mac_str, RTE_ETHER_ADDR_FMT_SIZE,
|
|
(struct rte_ether_addr *)hw->mac.mac_addr);
|
|
hns3_warn(hw, "default mac_addr from firmware is an invalid "
|
|
"unicast address, using random MAC address %s",
|
|
mac_str);
|
|
}
|
|
rte_ether_addr_copy((struct rte_ether_addr *)hw->mac.mac_addr,
|
|
ð_dev->data->mac_addrs[0]);
|
|
|
|
hw->adapter_state = HNS3_NIC_INITIALIZED;
|
|
|
|
if (__atomic_load_n(&hw->reset.schedule, __ATOMIC_RELAXED) ==
|
|
SCHEDULE_PENDING) {
|
|
hns3_err(hw, "Reschedule reset service after dev_init");
|
|
hns3_schedule_reset(hns);
|
|
} else {
|
|
/* IMP will wait ready flag before reset */
|
|
hns3_notify_reset_ready(hw, false);
|
|
}
|
|
|
|
hns3_info(hw, "hns3 dev initialization successful!");
|
|
return 0;
|
|
|
|
err_rte_zmalloc:
|
|
hns3_uninit_pf(eth_dev);
|
|
|
|
err_init_pf:
|
|
rte_free(hw->reset.wait_data);
|
|
|
|
err_init_reset:
|
|
hns3_mp_uninit_primary();
|
|
|
|
err_mp_init_primary:
|
|
err_mp_init_secondary:
|
|
eth_dev->dev_ops = NULL;
|
|
eth_dev->rx_pkt_burst = NULL;
|
|
eth_dev->rx_descriptor_status = NULL;
|
|
eth_dev->tx_pkt_burst = NULL;
|
|
eth_dev->tx_pkt_prepare = NULL;
|
|
eth_dev->tx_descriptor_status = NULL;
|
|
rte_free(eth_dev->process_private);
|
|
eth_dev->process_private = NULL;
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
hns3_dev_uninit(struct rte_eth_dev *eth_dev)
|
|
{
|
|
struct hns3_adapter *hns = eth_dev->data->dev_private;
|
|
struct hns3_hw *hw = &hns->hw;
|
|
|
|
PMD_INIT_FUNC_TRACE();
|
|
|
|
if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
|
|
rte_free(eth_dev->process_private);
|
|
eth_dev->process_private = NULL;
|
|
return 0;
|
|
}
|
|
|
|
if (hw->adapter_state < HNS3_NIC_CLOSING)
|
|
hns3_dev_close(eth_dev);
|
|
|
|
hw->adapter_state = HNS3_NIC_REMOVED;
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
eth_hns3_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
|
|
struct rte_pci_device *pci_dev)
|
|
{
|
|
return rte_eth_dev_pci_generic_probe(pci_dev,
|
|
sizeof(struct hns3_adapter),
|
|
hns3_dev_init);
|
|
}
|
|
|
|
static int
|
|
eth_hns3_pci_remove(struct rte_pci_device *pci_dev)
|
|
{
|
|
return rte_eth_dev_pci_generic_remove(pci_dev, hns3_dev_uninit);
|
|
}
|
|
|
|
static const struct rte_pci_id pci_id_hns3_map[] = {
|
|
{ RTE_PCI_DEVICE(PCI_VENDOR_ID_HUAWEI, HNS3_DEV_ID_GE) },
|
|
{ RTE_PCI_DEVICE(PCI_VENDOR_ID_HUAWEI, HNS3_DEV_ID_25GE) },
|
|
{ RTE_PCI_DEVICE(PCI_VENDOR_ID_HUAWEI, HNS3_DEV_ID_25GE_RDMA) },
|
|
{ RTE_PCI_DEVICE(PCI_VENDOR_ID_HUAWEI, HNS3_DEV_ID_50GE_RDMA) },
|
|
{ RTE_PCI_DEVICE(PCI_VENDOR_ID_HUAWEI, HNS3_DEV_ID_100G_RDMA_MACSEC) },
|
|
{ RTE_PCI_DEVICE(PCI_VENDOR_ID_HUAWEI, HNS3_DEV_ID_200G_RDMA) },
|
|
{ .vendor_id = 0, }, /* sentinel */
|
|
};
|
|
|
|
static struct rte_pci_driver rte_hns3_pmd = {
|
|
.id_table = pci_id_hns3_map,
|
|
.drv_flags = RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_INTR_LSC,
|
|
.probe = eth_hns3_pci_probe,
|
|
.remove = eth_hns3_pci_remove,
|
|
};
|
|
|
|
RTE_PMD_REGISTER_PCI(net_hns3, rte_hns3_pmd);
|
|
RTE_PMD_REGISTER_PCI_TABLE(net_hns3, pci_id_hns3_map);
|
|
RTE_PMD_REGISTER_KMOD_DEP(net_hns3, "* igb_uio | vfio-pci");
|
|
RTE_PMD_REGISTER_PARAM_STRING(net_hns3,
|
|
HNS3_DEVARG_RX_FUNC_HINT "=vec|sve|simple|common "
|
|
HNS3_DEVARG_TX_FUNC_HINT "=vec|sve|simple|common "
|
|
HNS3_DEVARG_DEV_CAPS_MASK "=<1-65535> ");
|
|
RTE_LOG_REGISTER_SUFFIX(hns3_logtype_init, init, NOTICE);
|
|
RTE_LOG_REGISTER_SUFFIX(hns3_logtype_driver, driver, NOTICE);
|