numam-dpdk/examples/multi_process/client_server_mp/mp_server/init.c

/*-
 *   BSD LICENSE
 *
 *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
 *   All rights reserved.
 *
 *   Redistribution and use in source and binary forms, with or without
 *   modification, are permitted provided that the following conditions
 *   are met:
 *
 *     * Redistributions of source code must retain the above copyright
 *       notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright
 *       notice, this list of conditions and the following disclaimer in
 *       the documentation and/or other materials provided with the
 *       distribution.
 *     * Neither the name of Intel Corporation nor the names of its
 *       contributors may be used to endorse or promote products derived
 *       from this software without specific prior written permission.
 *
 *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include <stdint.h>
#include <stdio.h>
#include <string.h>
#include <sys/queue.h>
#include <errno.h>
#include <stdarg.h>
#include <inttypes.h>

#include <rte_common.h>
#include <rte_memory.h>
#include <rte_memzone.h>
#include <rte_eal.h>
#include <rte_byteorder.h>
#include <rte_atomic.h>
#include <rte_launch.h>
#include <rte_per_lcore.h>
#include <rte_lcore.h>
#include <rte_branch_prediction.h>
#include <rte_debug.h>
#include <rte_ring.h>
#include <rte_log.h>
#include <rte_mempool.h>
#include <rte_memcpy.h>
#include <rte_mbuf.h>
#include <rte_interrupts.h>
#include <rte_pci.h>
#include <rte_ether.h>
#include <rte_ethdev.h>
#include <rte_malloc.h>
#include <rte_fbk_hash.h>
#include <rte_string_fns.h>
#include <rte_cycles.h>

#include "common.h"
#include "args.h"
#include "init.h"

#define MBUFS_PER_CLIENT 1536
#define MBUFS_PER_PORT 1536
#define MBUF_CACHE_SIZE 512
#define MBUF_DATA_SIZE (2048 + RTE_PKTMBUF_HEADROOM)

#define RTE_MP_RX_DESC_DEFAULT 512
#define RTE_MP_TX_DESC_DEFAULT 512
#define CLIENT_QUEUE_RINGSIZE 128

#define NO_FLAGS 0

/* The mbuf pool for packet rx */
struct rte_mempool *pktmbuf_pool;

/* array of info/queues for clients */
struct client *clients = NULL;

/* the port details */
struct port_info *ports;

/**
 * Initialise the mbuf pool for packet reception for the NIC, and any other
 * buffer pools needed by the app - currently none.
 */
static int
init_mbuf_pools(void)
{
	const unsigned num_mbufs = (num_clients * MBUFS_PER_CLIENT) \
			+ (ports->num_ports * MBUFS_PER_PORT);

	/* don't pass single-producer/single-consumer flags to mbuf create as it
	 * seems faster to use a cache instead */
	printf("Creating mbuf pool '%s' [%u mbufs] ...\n",
			PKTMBUF_POOL_NAME, num_mbufs);
	pktmbuf_pool = rte_pktmbuf_pool_create(PKTMBUF_POOL_NAME, num_mbufs,
		MBUF_CACHE_SIZE, 0, MBUF_DATA_SIZE, rte_socket_id());

	return (pktmbuf_pool == NULL); /* 0  on success */
}

/**
 * Initialise an individual port:
 * - configure number of rx and tx rings
 * - set up each rx ring, to pull from the main mbuf pool
 * - set up each tx ring
 * - start the port and report its status to stdout
 */
static int
init_port(uint8_t port_num)
{
	/* for port configuration all features are off by default */
	const struct rte_eth_conf port_conf = {
		.rxmode = {
			.mq_mode = ETH_MQ_RX_RSS
		}
	};
	const uint16_t rx_rings = 1, tx_rings = num_clients;
	const uint16_t rx_ring_size = RTE_MP_RX_DESC_DEFAULT;
	const uint16_t tx_ring_size = RTE_MP_TX_DESC_DEFAULT;

	uint16_t q;
	int retval;

	printf("Port %u init ... ", (unsigned)port_num);
	fflush(stdout);

	/* Standard DPDK port initialisation - config port, then set up
	 * rx and tx rings */
	if ((retval = rte_eth_dev_configure(port_num, rx_rings, tx_rings,
		&port_conf)) != 0)
		return retval;

	for (q = 0; q < rx_rings; q++) {
		retval = rte_eth_rx_queue_setup(port_num, q, rx_ring_size,
				rte_eth_dev_socket_id(port_num),
				NULL, pktmbuf_pool);
		if (retval < 0) return retval;
	}

	for ( q = 0; q < tx_rings; q ++ ) {
		retval = rte_eth_tx_queue_setup(port_num, q, tx_ring_size,
				rte_eth_dev_socket_id(port_num),
				NULL);
		if (retval < 0) return retval;
	}

	rte_eth_promiscuous_enable(port_num);

	retval  = rte_eth_dev_start(port_num);
	if (retval < 0) return retval;

	printf( "done: \n");

	return 0;
}

/**
 * Set up the DPDK rings which will be used to pass packets, via
 * pointers, between the multi-process server and client processes.
 * Each client needs one RX queue.
 */
static int
init_shm_rings(void)
{
	unsigned i;
	unsigned socket_id;
	const char * q_name;
	const unsigned ringsize = CLIENT_QUEUE_RINGSIZE;

	clients = rte_malloc("client details",
		sizeof(*clients) * num_clients, 0);
	if (clients == NULL)
		rte_exit(EXIT_FAILURE, "Cannot allocate memory for client program details\n");

	for (i = 0; i < num_clients; i++) {
		/* Create an RX queue for each client */
		socket_id = rte_socket_id();
		q_name = get_rx_queue_name(i);
		clients[i].rx_q = rte_ring_create(q_name,
				ringsize, socket_id,
				RING_F_SP_ENQ | RING_F_SC_DEQ ); /* single prod, single cons */
		if (clients[i].rx_q == NULL)
			rte_exit(EXIT_FAILURE, "Cannot create rx ring queue for client %u\n", i);
	}
	return 0;
}

/* Check the link status of all ports in up to 9s, and print them finally */
static void
check_all_ports_link_status(uint8_t port_num, uint32_t port_mask)
{
#define CHECK_INTERVAL 100 /* 100ms */
#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
	uint8_t portid, count, all_ports_up, print_flag = 0;
	struct rte_eth_link link;

	printf("\nChecking link status");
	fflush(stdout);
	for (count = 0; count <= MAX_CHECK_TIME; count++) {
		all_ports_up = 1;
		for (portid = 0; portid < port_num; portid++) {
			if ((port_mask & (1 << ports->id[portid])) == 0)
				continue;
			memset(&link, 0, sizeof(link));
			rte_eth_link_get_nowait(ports->id[portid], &link);
			/* print link status if flag set */
			if (print_flag == 1) {
				if (link.link_status)
					printf("Port %d Link Up - speed %u "
						"Mbps - %s\n", ports->id[portid],
						(unsigned)link.link_speed,
				(link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
					("full-duplex") : ("half-duplex\n"));
				else
					printf("Port %d Link Down\n",
						(uint8_t)ports->id[portid]);
				continue;
			}
			/* clear all_ports_up flag if any link down */
			if (link.link_status == 0) {
				all_ports_up = 0;
				break;
			}
		}
		/* after finally printing all link status, get out */
		if (print_flag == 1)
			break;

		if (all_ports_up == 0) {
			printf(".");
			fflush(stdout);
			rte_delay_ms(CHECK_INTERVAL);
		}

		/* set the print_flag if all ports up or timeout */
		if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
			print_flag = 1;
			printf("done\n");
		}
	}
}

/**
 * Main init function for the multi-process server app,
 * calls subfunctions to do each stage of the initialisation.
 */
int
init(int argc, char *argv[])
{
	int retval;
	const struct rte_memzone *mz;
	uint8_t i, total_ports;

	/* init EAL, parsing EAL args */
	retval = rte_eal_init(argc, argv);
	if (retval < 0)
		return -1;
	argc -= retval;
	argv += retval;

	/* get total number of ports */
	total_ports = rte_eth_dev_count();

	/* set up array for port data */
	mz = rte_memzone_reserve(MZ_PORT_INFO, sizeof(*ports),
				rte_socket_id(), NO_FLAGS);
	if (mz == NULL)
		rte_exit(EXIT_FAILURE, "Cannot reserve memory zone for port information\n");
	memset(mz->addr, 0, sizeof(*ports));
	ports = mz->addr;

	/* parse additional, application arguments */
	retval = parse_app_args(total_ports, argc, argv);
	if (retval != 0)
		return -1;

	/* initialise mbuf pools */
	retval = init_mbuf_pools();
	if (retval != 0)
		rte_exit(EXIT_FAILURE, "Cannot create needed mbuf pools\n");

	/* now initialise the ports we will use */
	for (i = 0; i < ports->num_ports; i++) {
		retval = init_port(ports->id[i]);
		if (retval != 0)
			rte_exit(EXIT_FAILURE, "Cannot initialise port %u\n",
					(unsigned)i);
	}

	check_all_ports_link_status(ports->num_ports, (~0x0));

	/* initialise the client queues/rings for inter-eu comms */
	init_shm_rings();

	return 0;
}