numam-dpdk/drivers/net/bnxt/tf_ulp/ulp_utils.c

/* SPDX-License-Identifier: BSD-3-Clause
 * Copyright(c) 2014-2019 Broadcom
 * All rights reserved.
 */

#include "ulp_utils.h"
#include "bnxt_tf_common.h"

/*
 * Initialize the regfile structure for writing
 *
 * regfile [in] Ptr to a regfile instance
 *
 * returns 0 on error or 1 on success
 */
uint32_t
ulp_regfile_init(struct ulp_regfile *regfile)
{
	/* validate the arguments */
	if (!regfile) {
		BNXT_TF_DBG(ERR, "invalid argument\n");
		return 0; /* failure */
	}
	memset(regfile, 0, sizeof(struct ulp_regfile));
	return 1; /* Success */
}

/*
 * Read a value from the regfile
 *
 * regfile [in] The regfile instance. Must be initialized prior to being used
 *
 * field [in] The field to be read within the regfile.
 *
 * data [in/out]
 *
 * returns size, zero on failure
 */
uint32_t
ulp_regfile_read(struct ulp_regfile *regfile,
		 enum bnxt_ulp_regfile_index field,
		 uint64_t *data)
{
	/* validate the arguments */
	if (!regfile || field >= BNXT_ULP_REGFILE_INDEX_LAST) {
		BNXT_TF_DBG(ERR, "invalid argument\n");
		return 0; /* failure */
	}

	*data = regfile->entry[field].data;
	return sizeof(*data);
}

/*
 * Write a value to the regfile
 *
 * regfile [in] The regfile instance.  Must be initialized prior to being used
 *
 * field [in] The field to be written within the regfile.
 *
 * data [in] The value is written into this variable.  It is going to be in the
 * same byte order as it was written.
 *
 * size [in] The size in bytes of the value beingritten into this
 * variable.
 *
 * returns 0 on fail
 */
uint32_t
ulp_regfile_write(struct ulp_regfile *regfile,
		  enum bnxt_ulp_regfile_index field,
		  uint64_t data)
{
	/* validate the arguments */
	if (!regfile || field >= BNXT_ULP_REGFILE_INDEX_LAST) {
		BNXT_TF_DBG(ERR, "invalid argument\n");
		return 0; /* failure */
	}

	regfile->entry[field].data = data;
	return sizeof(data); /* Success */
}

static void
ulp_bs_put_msb(uint8_t *bs, uint16_t bitpos, uint8_t bitlen, uint8_t val)
{
	uint8_t bitoffs = bitpos % 8;
	uint16_t index  = bitpos / 8;
	uint8_t mask;
	uint8_t tmp;
	int8_t shift;

	tmp = bs[index];
	mask = ((uint8_t)-1 >> (8 - bitlen));
	shift = 8 - bitoffs - bitlen;
	val &= mask;

	if (shift >= 0) {
		tmp &= ~(mask << shift);
		tmp |= val << shift;
		bs[index] = tmp;
	} else {
		tmp &= ~((uint8_t)-1 >> bitoffs);
		tmp |= val >> -shift;
		bs[index++] = tmp;

		tmp = bs[index];
		tmp &= ((uint8_t)-1 >> (bitlen - (8 - bitoffs)));
		tmp |= val << (8 + shift);
		bs[index] = tmp;
	}
}

static void
ulp_bs_put_lsb(uint8_t *bs, uint16_t bitpos, uint8_t bitlen, uint8_t val)
{
	uint8_t bitoffs = bitpos % 8;
	uint16_t index  = bitpos / 8;
	uint8_t mask;
	uint8_t tmp;
	uint8_t shift;
	uint8_t partial;

	tmp = bs[index];
	shift = bitoffs;

	if (bitoffs + bitlen <= 8) {
		mask = ((1 << bitlen) - 1) << shift;
		tmp &= ~mask;
		tmp |= ((val << shift) & mask);
		bs[index] = tmp;
	} else {
		partial = 8 - bitoffs;
		mask = ((1 << partial) - 1) << shift;
		tmp &= ~mask;
		tmp |= ((val << shift) & mask);
		bs[index++] = tmp;

		val >>= partial;
		partial = bitlen - partial;
		mask = ((1 << partial) - 1);
		tmp = bs[index];
		tmp &= ~mask;
		tmp |= (val & mask);
		bs[index] = tmp;
	}
}

/* Assuming that val is in Big-Endian Format */
static uint32_t
ulp_bs_push_lsb(uint8_t *bs, uint16_t pos, uint8_t len, uint8_t *val)
{
	int i;
	int cnt = (len) / 8;
	int tlen = len;

	if (cnt > 0 && !(len % 8))
		cnt -= 1;

	for (i = 0; i < cnt; i++) {
		ulp_bs_put_lsb(bs, pos, 8, val[cnt - i]);
		pos += 8;
		tlen -= 8;
	}

	/* Handle the remainder bits */
	if (tlen)
		ulp_bs_put_lsb(bs, pos, tlen, val[0]);
	return len;
}

/* Assuming that val is in Big-Endian Format */
static uint32_t
ulp_bs_push_msb(uint8_t *bs, uint16_t pos, uint8_t len, uint8_t *val)
{
	int i;
	int cnt = (len + 7) / 8;
	int tlen = len;

	/* Handle any remainder bits */
	int tmp = len % 8;

	if (!tmp)
		tmp = 8;

	ulp_bs_put_msb(bs, pos, tmp, val[0]);

	pos += tmp;
	tlen -= tmp;

	for (i = 1; i < cnt; i++) {
		ulp_bs_put_msb(bs, pos, 8, val[i]);
		pos += 8;
		tlen -= 8;
	}

	return len;
}

/*
 * Initializes the blob structure for creating binary blob
 *
 * blob [in] The blob to be initialized
 *
 * bitlen [in] The bit length of the blob
 *
 * order [in] The byte order for the blob.  Currently only supporting
 * big endian.  All fields are packed with this order.
 *
 * returns 0 on error or 1 on success
 */
uint32_t
ulp_blob_init(struct ulp_blob *blob,
	      uint16_t bitlen,
	      enum bnxt_ulp_byte_order order)
{
	/* validate the arguments */
	if (!blob || bitlen > (8 * sizeof(blob->data))) {
		BNXT_TF_DBG(ERR, "invalid argument\n");
		return 0; /* failure */
	}
	blob->bitlen = bitlen;
	blob->byte_order = order;
	blob->write_idx = 0;
	memset(blob->data, 0, sizeof(blob->data));
	return 1; /* Success */
}

/*
 * Add data to the binary blob at the current offset.
 *
 * blob [in] The blob that data is added to.  The blob must
 * be initialized prior to pushing data.
 *
 * data [in] A pointer to bytes to be added to the blob.
 *
 * datalen [in] The number of bits to be added to the blob.
 *
 * The offset of the data is updated after each push of data.
 * NULL returned on error.
 */
#define ULP_BLOB_BYTE		8
#define ULP_BLOB_BYTE_HEX	0xFF
#define BLOB_MASK_CAL(x)	((0xFF << (x)) & 0xFF)
uint32_t
ulp_blob_push(struct ulp_blob *blob,
	      uint8_t *data,
	      uint32_t datalen)
{
	uint32_t rc;

	/* validate the arguments */
	if (!blob || datalen > (uint32_t)(blob->bitlen - blob->write_idx)) {
		BNXT_TF_DBG(ERR, "invalid argument\n");
		return 0; /* failure */
	}

	if (blob->byte_order == BNXT_ULP_BYTE_ORDER_BE)
		rc = ulp_bs_push_msb(blob->data,
				     blob->write_idx,
				     datalen,
				     data);
	else
		rc = ulp_bs_push_lsb(blob->data,
				     blob->write_idx,
				     datalen,
				     data);
	if (!rc) {
		BNXT_TF_DBG(ERR, "Failed ro write blob\n");
		return 0;
	}
	blob->write_idx += datalen;
	return datalen;
}

/*
 * Add data to the binary blob at the current offset.
 *
 * blob [in] The blob that data is added to.  The blob must
 * be initialized prior to pushing data.
 *
 * data [in] 64-bit value to be added to the blob.
 *
 * datalen [in] The number of bits to be added to the blob.
 *
 * The offset of the data is updated after each push of data.
 * NULL returned on error, pointer pushed value otherwise.
 */
uint8_t *
ulp_blob_push_64(struct ulp_blob *blob,
		 uint64_t *data,
		 uint32_t datalen)
{
	uint8_t *val = (uint8_t *)data;
	int rc;

	int size = (datalen + 7) / 8;

	if (!blob || !data ||
	    datalen > (uint32_t)(blob->bitlen - blob->write_idx)) {
		BNXT_TF_DBG(ERR, "invalid argument\n");
		return 0;
	}

	rc = ulp_blob_push(blob, &val[8 - size], datalen);
	if (!rc)
		return 0;

	return &val[8 - size];
}

/*
 * Add encap data to the binary blob at the current offset.
 *
 * blob [in] The blob that data is added to.  The blob must
 * be initialized prior to pushing data.
 *
 * data [in] value to be added to the blob.
 *
 * datalen [in] The number of bits to be added to the blob.
 *
 * The offset of the data is updated after each push of data.
 * NULL returned on error, pointer pushed value otherwise.
 */
uint32_t
ulp_blob_push_encap(struct ulp_blob *blob,
		    uint8_t *data,
		    uint32_t datalen)
{
	uint8_t		*val = (uint8_t *)data;
	uint32_t	initial_size, write_size = datalen;
	uint32_t	size = 0;

	if (!blob || !data ||
	    datalen > (uint32_t)(blob->bitlen - blob->write_idx)) {
		BNXT_TF_DBG(ERR, "invalid argument\n");
		return 0;
	}

	initial_size = ULP_BYTE_2_BITS(sizeof(uint64_t)) -
	    (blob->write_idx % ULP_BYTE_2_BITS(sizeof(uint64_t)));
	while (write_size > 0) {
		if (initial_size && write_size > initial_size) {
			size = initial_size;
			initial_size = 0;
		} else if (initial_size && write_size <= initial_size) {
			size = write_size;
			initial_size = 0;
		} else if (write_size > ULP_BYTE_2_BITS(sizeof(uint64_t))) {
			size = ULP_BYTE_2_BITS(sizeof(uint64_t));
		} else {
			size = write_size;
		}
		if (!ulp_blob_push(blob, val, size)) {
			BNXT_TF_DBG(ERR, "push field failed\n");
			return 0;
		}
		val += ULP_BITS_2_BYTE(size);
		write_size -= size;
	}
	return datalen;
}

/*
 * Adds pad to an initialized blob at the current offset
 *
 * blob [in] The blob that data is added to.  The blob must
 * be initialized prior to pushing data.
 *
 * datalen [in] The number of bits of pad to add
 *
 * returns the number of pad bits added, zero on failure
 */
uint32_t
ulp_blob_pad_push(struct ulp_blob *blob,
		  uint32_t datalen)
{
	if (datalen > (uint32_t)(blob->bitlen - blob->write_idx)) {
		BNXT_TF_DBG(ERR, "Pad too large for blob\n");
		return 0;
	}

	blob->write_idx += datalen;
	return datalen;
}

/*
 * Get the data portion of the binary blob.
 *
 * blob [in] The blob's data to be retrieved. The blob must be
 * initialized prior to pushing data.
 *
 * datalen [out] The number of bits to that are filled.
 *
 * returns a byte array of the blob data.  Returns NULL on error.
 */
uint8_t *
ulp_blob_data_get(struct ulp_blob *blob,
		  uint16_t *datalen)
{
	/* validate the arguments */
	if (!blob) {
		BNXT_TF_DBG(ERR, "invalid argument\n");
		return NULL; /* failure */
	}
	*datalen = blob->write_idx;
	return blob->data;
}

/*
 * Set the encap swap start index of the binary blob.
 *
 * blob [in] The blob's data to be retrieved. The blob must be
 * initialized prior to pushing data.
 *
 * returns void.
 */
void
ulp_blob_encap_swap_idx_set(struct ulp_blob *blob)
{
	/* validate the arguments */
	if (!blob) {
		BNXT_TF_DBG(ERR, "invalid argument\n");
		return; /* failure */
	}
	blob->encap_swap_idx = blob->write_idx;
}

/*
 * Perform the encap buffer swap to 64 bit reversal.
 *
 * blob [in] The blob's data to be used for swap.
 *
 * returns void.
 */
void
ulp_blob_perform_encap_swap(struct ulp_blob *blob)
{
	uint32_t		i, idx = 0, end_idx = 0;
	uint8_t		temp_val_1, temp_val_2;

	/* validate the arguments */
	if (!blob) {
		BNXT_TF_DBG(ERR, "invalid argument\n");
		return; /* failure */
	}
	idx = ULP_BITS_2_BYTE_NR(blob->encap_swap_idx + 1);
	end_idx = ULP_BITS_2_BYTE(blob->write_idx);

	while (idx <= end_idx) {
		for (i = 0; i < 4; i = i + 2) {
			temp_val_1 = blob->data[idx + i];
			temp_val_2 = blob->data[idx + i + 1];
			blob->data[idx + i] = blob->data[idx + 6 - i];
			blob->data[idx + i + 1] = blob->data[idx + 7 - i];
			blob->data[idx + 7 - i] = temp_val_2;
			blob->data[idx + 6 - i] = temp_val_1;
		}
		idx += 8;
	}
}

/*
 * Read data from the operand
 *
 * operand [in] A pointer to a 16 Byte operand
 *
 * val [in/out] The variable to copy the operand to
 *
 * bytes [in] The number of bytes to read into val
 *
 * returns number of bits read, zero on error
 */
uint16_t
ulp_operand_read(uint8_t *operand,
		 uint8_t *val,
		 uint16_t bytes)
{
	/* validate the arguments */
	if (!operand || !val) {
		BNXT_TF_DBG(ERR, "invalid argument\n");
		return 0; /* failure */
	}
	memcpy(val, operand, bytes);
	return bytes;
}

/*
 * copy the buffer in the encap format which is 2 bytes.
 * The MSB of the src is placed at the LSB of dst.
 *
 * dst [out] The destination buffer
 * src [in] The source buffer dst
 * size[in] size of the buffer.
 */
void
ulp_encap_buffer_copy(uint8_t *dst,
		      const uint8_t *src,
		      uint16_t size)
{
	uint16_t	idx = 0;

	/* copy 2 bytes at a time. Write MSB to LSB */
	while ((idx + sizeof(uint16_t)) <= size) {
		memcpy(&dst[idx], &src[size - idx - sizeof(uint16_t)],
		       sizeof(uint16_t));
		idx += sizeof(uint16_t);
	}
}

/*
 * Check the buffer is empty
 *
 * buf [in] The buffer
 * size [in] The size of the buffer
 *
 */
int32_t ulp_buffer_is_empty(const uint8_t *buf, uint32_t size)
{
	return buf[0] == 0 && !memcmp(buf, buf + 1, size - 1);
}

/* Function to check if bitmap is zero.Return 1 on success */
uint32_t ulp_bitmap_is_zero(uint8_t *bitmap, int32_t size)
{
	while (size-- > 0) {
		if (*bitmap != 0)
			return 0;
		bitmap++;
	}
	return 1;
}

/* Function to check if bitmap is ones. Return 1 on success */
uint32_t ulp_bitmap_is_ones(uint8_t *bitmap, int32_t size)
{
	while (size-- > 0) {
		if (*bitmap != 0xFF)
			return 0;
		bitmap++;
	}
	return 1;
}

/* Function to check if bitmap is not zero. Return 1 on success */
uint32_t ulp_bitmap_notzero(uint8_t *bitmap, int32_t size)
{
	while (size-- > 0) {
		if (*bitmap != 0)
			return 1;
		bitmap++;
	}
	return 0;
}