eecae39689
Add ixgbe MDIO lock/unlock and access APIs to read and write registers using specific device address. This provides MDIO access to any devices that are not associated with the autoprobed PHY.Export these APIs via the map file Signed-off-by: Shweta Choudaha <shweta.choudaha@att.com> Reviewed-by: Chas Williams <chas3@att.com> Reviewed-by: Luca Boccassi <bluca@debian.org> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: Qi Zhang <qi.z.zhang@intel.com>
712 lines
19 KiB
C
712 lines
19 KiB
C
/* SPDX-License-Identifier: BSD-3-Clause
|
|
* Copyright(c) 2016 Intel Corporation
|
|
*/
|
|
|
|
/**
|
|
* @file rte_pmd_ixgbe.h
|
|
* ixgbe PMD specific functions.
|
|
*
|
|
**/
|
|
|
|
#ifndef _PMD_IXGBE_H_
|
|
#define _PMD_IXGBE_H_
|
|
|
|
#include <rte_ethdev_driver.h>
|
|
|
|
/**
|
|
* Notify VF when PF link status changes.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param vf
|
|
* VF id.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-EINVAL) if *vf* invalid.
|
|
*/
|
|
int rte_pmd_ixgbe_ping_vf(uint16_t port, uint16_t vf);
|
|
|
|
/**
|
|
* Set the VF MAC address.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param vf
|
|
* VF id.
|
|
* @param mac_addr
|
|
* VF MAC address.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-EINVAL) if *vf* or *mac_addr* is invalid.
|
|
*/
|
|
int rte_pmd_ixgbe_set_vf_mac_addr(uint16_t port, uint16_t vf,
|
|
struct ether_addr *mac_addr);
|
|
|
|
/**
|
|
* Enable/Disable VF VLAN anti spoofing.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param vf
|
|
* VF on which to set VLAN anti spoofing.
|
|
* @param on
|
|
* 1 - Enable VFs VLAN anti spoofing.
|
|
* 0 - Disable VFs VLAN anti spoofing.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_pmd_ixgbe_set_vf_vlan_anti_spoof(uint16_t port, uint16_t vf,
|
|
uint8_t on);
|
|
|
|
/**
|
|
* Enable/Disable VF MAC anti spoofing.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param vf
|
|
* VF on which to set MAC anti spoofing.
|
|
* @param on
|
|
* 1 - Enable VFs MAC anti spoofing.
|
|
* 0 - Disable VFs MAC anti spoofing.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_pmd_ixgbe_set_vf_mac_anti_spoof(uint16_t port, uint16_t vf, uint8_t on);
|
|
|
|
/**
|
|
* Enable/Disable vf vlan insert
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param vf
|
|
* ID specifying VF.
|
|
* @param vlan_id
|
|
* 0 - Disable VF's vlan insert.
|
|
* n - Enable; n is inserted as the vlan id.
|
|
*
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_pmd_ixgbe_set_vf_vlan_insert(uint16_t port, uint16_t vf,
|
|
uint16_t vlan_id);
|
|
|
|
/**
|
|
* Enable/Disable tx loopback
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param on
|
|
* 1 - Enable tx loopback.
|
|
* 0 - Disable tx loopback.
|
|
*
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_pmd_ixgbe_set_tx_loopback(uint16_t port, uint8_t on);
|
|
|
|
/**
|
|
* set all queues drop enable bit
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param on
|
|
* 1 - set the queue drop enable bit for all pools.
|
|
* 0 - reset the queue drop enable bit for all pools.
|
|
*
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_pmd_ixgbe_set_all_queues_drop_en(uint16_t port, uint8_t on);
|
|
|
|
/**
|
|
* set drop enable bit in the VF split rx control register
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param vf
|
|
* ID specifying VF.
|
|
* @param on
|
|
* 1 - set the drop enable bit in the split rx control register.
|
|
* 0 - reset the drop enable bit in the split rx control register.
|
|
*
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
|
|
int rte_pmd_ixgbe_set_vf_split_drop_en(uint16_t port, uint16_t vf, uint8_t on);
|
|
|
|
/**
|
|
* Enable/Disable vf vlan strip for all queues in a pool
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param vf
|
|
* ID specifying VF.
|
|
* @param on
|
|
* 1 - Enable VF's vlan strip on RX queues.
|
|
* 0 - Disable VF's vlan strip on RX queues.
|
|
*
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support this feature.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int
|
|
rte_pmd_ixgbe_set_vf_vlan_stripq(uint16_t port, uint16_t vf, uint8_t on);
|
|
|
|
/**
|
|
* Enable MACsec offload.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param en
|
|
* 1 - Enable encryption (encrypt and add integrity signature).
|
|
* 0 - Disable encryption (only add integrity signature).
|
|
* @param rp
|
|
* 1 - Enable replay protection.
|
|
* 0 - Disable replay protection.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-ENOTSUP) if hardware doesn't support this feature.
|
|
*/
|
|
int rte_pmd_ixgbe_macsec_enable(uint16_t port, uint8_t en, uint8_t rp);
|
|
|
|
/**
|
|
* Disable MACsec offload.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-ENOTSUP) if hardware doesn't support this feature.
|
|
*/
|
|
int rte_pmd_ixgbe_macsec_disable(uint16_t port);
|
|
|
|
/**
|
|
* Configure Tx SC (Secure Connection).
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param mac
|
|
* The MAC address on the local side.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-ENOTSUP) if hardware doesn't support this feature.
|
|
*/
|
|
int rte_pmd_ixgbe_macsec_config_txsc(uint16_t port, uint8_t *mac);
|
|
|
|
/**
|
|
* Configure Rx SC (Secure Connection).
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param mac
|
|
* The MAC address on the remote side.
|
|
* @param pi
|
|
* The PI (port identifier) on the remote side.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-ENOTSUP) if hardware doesn't support this feature.
|
|
*/
|
|
int rte_pmd_ixgbe_macsec_config_rxsc(uint16_t port, uint8_t *mac, uint16_t pi);
|
|
|
|
/**
|
|
* Enable Tx SA (Secure Association).
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param idx
|
|
* The SA to be enabled (0 or 1).
|
|
* @param an
|
|
* The association number on the local side.
|
|
* @param pn
|
|
* The packet number on the local side.
|
|
* @param key
|
|
* The key on the local side.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-ENOTSUP) if hardware doesn't support this feature.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_pmd_ixgbe_macsec_select_txsa(uint16_t port, uint8_t idx, uint8_t an,
|
|
uint32_t pn, uint8_t *key);
|
|
|
|
/**
|
|
* Enable Rx SA (Secure Association).
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param idx
|
|
* The SA to be enabled (0 or 1)
|
|
* @param an
|
|
* The association number on the remote side.
|
|
* @param pn
|
|
* The packet number on the remote side.
|
|
* @param key
|
|
* The key on the remote side.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-ENOTSUP) if hardware doesn't support this feature.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_pmd_ixgbe_macsec_select_rxsa(uint16_t port, uint8_t idx, uint8_t an,
|
|
uint32_t pn, uint8_t *key);
|
|
|
|
/**
|
|
* Set RX L2 Filtering mode of a VF of an Ethernet device.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param vf
|
|
* VF id.
|
|
* @param rx_mask
|
|
* The RX mode mask, which is one or more of accepting Untagged Packets,
|
|
* packets that match the PFUTA table, Broadcast and Multicast Promiscuous.
|
|
* ETH_VMDQ_ACCEPT_UNTAG,ETH_VMDQ_ACCEPT_HASH_UC,
|
|
* ETH_VMDQ_ACCEPT_BROADCAST and ETH_VMDQ_ACCEPT_MULTICAST will be used
|
|
* in rx_mode.
|
|
* @param on
|
|
* 1 - Enable a VF RX mode.
|
|
* 0 - Disable a VF RX mode.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int
|
|
rte_pmd_ixgbe_set_vf_rxmode(uint16_t port, uint16_t vf, uint16_t rx_mask,
|
|
uint8_t on);
|
|
|
|
/**
|
|
* Enable or disable a VF traffic receive of an Ethernet device.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param vf
|
|
* VF id.
|
|
* @param on
|
|
* 1 - Enable a VF traffic receive.
|
|
* 0 - Disable a VF traffic receive.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int
|
|
rte_pmd_ixgbe_set_vf_rx(uint16_t port, uint16_t vf, uint8_t on);
|
|
|
|
/**
|
|
* Enable or disable a VF traffic transmit of the Ethernet device.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param vf
|
|
* VF id.
|
|
* @param on
|
|
* 1 - Enable a VF traffic transmit.
|
|
* 0 - Disable a VF traffic transmit.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int
|
|
rte_pmd_ixgbe_set_vf_tx(uint16_t port, uint16_t vf, uint8_t on);
|
|
|
|
/**
|
|
* Enable/Disable hardware VF VLAN filtering by an Ethernet device of
|
|
* received VLAN packets tagged with a given VLAN Tag Identifier.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param vlan
|
|
* The VLAN Tag Identifier whose filtering must be enabled or disabled.
|
|
* @param vf_mask
|
|
* Bitmap listing which VFs participate in the VLAN filtering.
|
|
* @param vlan_on
|
|
* 1 - Enable VFs VLAN filtering.
|
|
* 0 - Disable VFs VLAN filtering.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int
|
|
rte_pmd_ixgbe_set_vf_vlan_filter(uint16_t port, uint16_t vlan,
|
|
uint64_t vf_mask, uint8_t vlan_on);
|
|
|
|
/**
|
|
* Set the rate limitation for a vf on an Ethernet device.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param vf
|
|
* VF id.
|
|
* @param tx_rate
|
|
* The tx rate allocated from the total link speed for this VF id.
|
|
* @param q_msk
|
|
* The queue mask which need to set the rate.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support this feature.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_pmd_ixgbe_set_vf_rate_limit(uint16_t port, uint16_t vf,
|
|
uint16_t tx_rate, uint64_t q_msk);
|
|
|
|
/**
|
|
* Set all the TCs' bandwidth weight.
|
|
*
|
|
* The bw_weight means the percentage occupied by the TC.
|
|
* It can be taken as the relative min bandwidth setting.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param tc_num
|
|
* Number of TCs.
|
|
* @param bw_weight
|
|
* An array of relative bandwidth weight for all the TCs.
|
|
* The summary of the bw_weight should be 100.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-EINVAL) if bad parameter.
|
|
* - (-ENOTSUP) not supported by firmware.
|
|
*/
|
|
int rte_pmd_ixgbe_set_tc_bw_alloc(uint16_t port,
|
|
uint8_t tc_num,
|
|
uint8_t *bw_weight);
|
|
|
|
|
|
/**
|
|
* Initialize bypass logic. This function needs to be called before
|
|
* executing any other bypass API.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_pmd_ixgbe_bypass_init(uint16_t port);
|
|
|
|
/**
|
|
* Return bypass state.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param state
|
|
* The return bypass state.
|
|
* - (1) Normal mode
|
|
* - (2) Bypass mode
|
|
* - (3) Isolate mode
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_pmd_ixgbe_bypass_state_show(uint16_t port, uint32_t *state);
|
|
|
|
/**
|
|
* Set bypass state
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param new_state
|
|
* The current bypass state.
|
|
* - (1) Normal mode
|
|
* - (2) Bypass mode
|
|
* - (3) Isolate mode
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_pmd_ixgbe_bypass_state_set(uint16_t port, uint32_t *new_state);
|
|
|
|
/**
|
|
* Return bypass state when given event occurs.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param event
|
|
* The bypass event
|
|
* - (1) Main power on (power button is pushed)
|
|
* - (2) Auxiliary power on (power supply is being plugged)
|
|
* - (3) Main power off (system shutdown and power supply is left plugged in)
|
|
* - (4) Auxiliary power off (power supply is being unplugged)
|
|
* - (5) Display or set the watchdog timer
|
|
* @param state
|
|
* The bypass state when given event occurred.
|
|
* - (1) Normal mode
|
|
* - (2) Bypass mode
|
|
* - (3) Isolate mode
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_pmd_ixgbe_bypass_event_show(uint16_t port,
|
|
uint32_t event,
|
|
uint32_t *state);
|
|
|
|
/**
|
|
* Set bypass state when given event occurs.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param event
|
|
* The bypass event
|
|
* - (1) Main power on (power button is pushed)
|
|
* - (2) Auxiliary power on (power supply is being plugged)
|
|
* - (3) Main power off (system shutdown and power supply is left plugged in)
|
|
* - (4) Auxiliary power off (power supply is being unplugged)
|
|
* - (5) Display or set the watchdog timer
|
|
* @param state
|
|
* The assigned state when given event occurs.
|
|
* - (1) Normal mode
|
|
* - (2) Bypass mode
|
|
* - (3) Isolate mode
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_pmd_ixgbe_bypass_event_store(uint16_t port,
|
|
uint32_t event,
|
|
uint32_t state);
|
|
|
|
/**
|
|
* Set bypass watchdog timeout count.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param timeout
|
|
* The timeout to be set.
|
|
* - (0) 0 seconds (timer is off)
|
|
* - (1) 1.5 seconds
|
|
* - (2) 2 seconds
|
|
* - (3) 3 seconds
|
|
* - (4) 4 seconds
|
|
* - (5) 8 seconds
|
|
* - (6) 16 seconds
|
|
* - (7) 32 seconds
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_pmd_ixgbe_bypass_wd_timeout_store(uint16_t port, uint32_t timeout);
|
|
|
|
/**
|
|
* Get bypass firmware version.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param ver
|
|
* The firmware version
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_pmd_ixgbe_bypass_ver_show(uint16_t port, uint32_t *ver);
|
|
|
|
/**
|
|
* Return bypass watchdog timeout in seconds
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param wd_timeout
|
|
* The return watchdog timeout. "0" represents timer expired
|
|
* - (0) 0 seconds (timer is off)
|
|
* - (1) 1.5 seconds
|
|
* - (2) 2 seconds
|
|
* - (3) 3 seconds
|
|
* - (4) 4 seconds
|
|
* - (5) 8 seconds
|
|
* - (6) 16 seconds
|
|
* - (7) 32 seconds
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_pmd_ixgbe_bypass_wd_timeout_show(uint16_t port, uint32_t *wd_timeout);
|
|
|
|
/**
|
|
* Reset bypass watchdog timer
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_pmd_ixgbe_bypass_wd_reset(uint16_t port);
|
|
|
|
/**
|
|
* Acquire swfw semaphore lock for MDIO access
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (IXGBE_ERR_SWFW_SYNC) If sw/fw semaphore acquisition failed
|
|
*/
|
|
int __rte_experimental
|
|
rte_pmd_ixgbe_mdio_lock(uint16_t port);
|
|
|
|
/**
|
|
* Release swfw semaphore lock used for MDIO access
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-ENODEV) if *port* invalid.
|
|
*/
|
|
int __rte_experimental
|
|
rte_pmd_ixgbe_mdio_unlock(uint16_t port);
|
|
|
|
/**
|
|
* Read PHY register using MDIO without MDIO lock
|
|
* The lock must be taken separately before calling this
|
|
* API
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param reg_addr
|
|
* 32 bit PHY Register
|
|
* @param dev_type
|
|
* Used to define device base address
|
|
* @param phy_data
|
|
* Pointer for reading PHY register data
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (IXGBE_ERR_PHY) If PHY read command failed
|
|
*/
|
|
int __rte_experimental
|
|
rte_pmd_ixgbe_mdio_unlocked_read(uint16_t port, uint32_t reg_addr,
|
|
uint32_t dev_type, uint16_t *phy_data);
|
|
|
|
/**
|
|
* Write data to PHY register using without MDIO lock
|
|
* The lock must be taken separately before calling this
|
|
* API
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param reg_addr
|
|
* 32 bit PHY Register
|
|
* @param dev_type
|
|
* Used to define device base address
|
|
* @param phy_data
|
|
* Data to write to PHY register
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (IXGBE_ERR_PHY) If PHY read command failed
|
|
*/
|
|
int __rte_experimental
|
|
rte_pmd_ixgbe_mdio_unlocked_write(uint16_t port, uint32_t reg_addr,
|
|
uint32_t dev_type, uint16_t phy_data);
|
|
|
|
/**
|
|
* Response sent back to ixgbe driver from user app after callback
|
|
*/
|
|
enum rte_pmd_ixgbe_mb_event_rsp {
|
|
RTE_PMD_IXGBE_MB_EVENT_NOOP_ACK, /**< skip mbox request and ACK */
|
|
RTE_PMD_IXGBE_MB_EVENT_NOOP_NACK, /**< skip mbox request and NACK */
|
|
RTE_PMD_IXGBE_MB_EVENT_PROCEED, /**< proceed with mbox request */
|
|
RTE_PMD_IXGBE_MB_EVENT_MAX /**< max value of this enum */
|
|
};
|
|
|
|
/**
|
|
* Data sent to the user application when the callback is executed.
|
|
*/
|
|
struct rte_pmd_ixgbe_mb_event_param {
|
|
uint16_t vfid; /**< Virtual Function number */
|
|
uint16_t msg_type; /**< VF to PF message type, defined in ixgbe_mbx.h */
|
|
uint16_t retval; /**< return value */
|
|
void *msg; /**< pointer to message */
|
|
};
|
|
enum {
|
|
RTE_PMD_IXGBE_BYPASS_MODE_NONE,
|
|
RTE_PMD_IXGBE_BYPASS_MODE_NORMAL,
|
|
RTE_PMD_IXGBE_BYPASS_MODE_BYPASS,
|
|
RTE_PMD_IXGBE_BYPASS_MODE_ISOLATE,
|
|
RTE_PMD_IXGBE_BYPASS_MODE_NUM,
|
|
};
|
|
|
|
#define RTE_PMD_IXGBE_BYPASS_MODE_VALID(x) \
|
|
((x) > RTE_PMD_IXGBE_BYPASS_MODE_NONE && \
|
|
(x) < RTE_PMD_IXGBE_BYPASS_MODE_NUM)
|
|
|
|
enum {
|
|
RTE_PMD_IXGBE_BYPASS_EVENT_NONE,
|
|
RTE_PMD_IXGBE_BYPASS_EVENT_START,
|
|
RTE_PMD_IXGBE_BYPASS_EVENT_OS_ON = RTE_PMD_IXGBE_BYPASS_EVENT_START,
|
|
RTE_PMD_IXGBE_BYPASS_EVENT_POWER_ON,
|
|
RTE_PMD_IXGBE_BYPASS_EVENT_OS_OFF,
|
|
RTE_PMD_IXGBE_BYPASS_EVENT_POWER_OFF,
|
|
RTE_PMD_IXGBE_BYPASS_EVENT_TIMEOUT,
|
|
RTE_PMD_IXGBE_BYPASS_EVENT_NUM
|
|
};
|
|
|
|
#define RTE_PMD_IXGBE_BYPASS_EVENT_VALID(x) \
|
|
((x) > RTE_PMD_IXGBE_BYPASS_EVENT_NONE && \
|
|
(x) < RTE_PMD_IXGBE_BYPASS_MODE_NUM)
|
|
|
|
enum {
|
|
RTE_PMD_IXGBE_BYPASS_TMT_OFF, /* timeout disabled. */
|
|
RTE_PMD_IXGBE_BYPASS_TMT_1_5_SEC, /* timeout for 1.5 seconds */
|
|
RTE_PMD_IXGBE_BYPASS_TMT_2_SEC, /* timeout for 2 seconds */
|
|
RTE_PMD_IXGBE_BYPASS_TMT_3_SEC, /* timeout for 3 seconds */
|
|
RTE_PMD_IXGBE_BYPASS_TMT_4_SEC, /* timeout for 4 seconds */
|
|
RTE_PMD_IXGBE_BYPASS_TMT_8_SEC, /* timeout for 8 seconds */
|
|
RTE_PMD_IXGBE_BYPASS_TMT_16_SEC, /* timeout for 16 seconds */
|
|
RTE_PMD_IXGBE_BYPASS_TMT_32_SEC, /* timeout for 32 seconds */
|
|
RTE_PMD_IXGBE_BYPASS_TMT_NUM
|
|
};
|
|
|
|
#define RTE_PMD_IXGBE_BYPASS_TMT_VALID(x) \
|
|
((x) == RTE_PMD_IXGBE_BYPASS_TMT_OFF || \
|
|
((x) > RTE_PMD_IXGBE_BYPASS_TMT_OFF && \
|
|
(x) < RTE_PMD_IXGBE_BYPASS_TMT_NUM))
|
|
|
|
#endif /* _PMD_IXGBE_H_ */
|