487eec3401
dpaa and dpaa2 config have evolved to be same. The same binary can now work across the platforms. So, there is no need to maintain two different build configs. The dpaa config shall work for both generation of dpaa platforms. Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com> Reviewed-by: David Marchand <david.marchand@redhat.com>
158 lines
4.0 KiB
ReStructuredText
158 lines
4.0 KiB
ReStructuredText
.. SPDX-License-Identifier: BSD-3-Clause
|
|
Copyright(c) 2017 Cavium, Inc
|
|
|
|
.. _pmd_build_and_test:
|
|
|
|
Compiling and testing a PMD for a NIC
|
|
=====================================
|
|
|
|
This section demonstrates how to compile and run a Poll Mode Driver (PMD) for
|
|
the available Network Interface Cards in DPDK using TestPMD.
|
|
|
|
TestPMD is one of the reference applications distributed with the DPDK. Its main
|
|
purpose is to forward packets between Ethernet ports on a network interface and
|
|
as such is the best way to test a PMD.
|
|
|
|
Refer to the :ref:`testpmd application user guide <testpmd_ug>` for detailed
|
|
information on how to build and run testpmd.
|
|
|
|
Driver Compilation
|
|
------------------
|
|
|
|
To compile a PMD for a platform, run make with appropriate target as shown below.
|
|
Use "make" command in Linux and "gmake" in FreeBSD. This will also build testpmd.
|
|
|
|
To check available targets:
|
|
|
|
.. code-block:: console
|
|
|
|
cd <DPDK-source-directory>
|
|
make showconfigs
|
|
|
|
Example output:
|
|
|
|
.. code-block:: console
|
|
|
|
arm-armv7a-linux-gcc
|
|
arm64-armv8a-linux-gcc
|
|
arm64-dpaa-linux-gcc
|
|
arm64-thunderx-linux-gcc
|
|
arm64-xgene1-linux-gcc
|
|
i686-native-linux-gcc
|
|
i686-native-linux-icc
|
|
ppc_64-power8-linux-gcc
|
|
x86_64-native-freebsd-clang
|
|
x86_64-native-freebsd-gcc
|
|
x86_64-native-linux-clang
|
|
x86_64-native-linux-gcc
|
|
x86_64-native-linux-icc
|
|
x86_x32-native-linux-gcc
|
|
|
|
To compile a PMD for Linux x86_64 gcc target, run the following "make" command:
|
|
|
|
.. code-block:: console
|
|
|
|
make install T=x86_64-native-linux-gcc
|
|
|
|
Use ARM (ThunderX, DPAA, X-Gene) or PowerPC target for respective platform.
|
|
|
|
For more information, refer to the :ref:`Getting Started Guide for Linux <linux_gsg>`
|
|
or :ref:`Getting Started Guide for FreeBSD <freebsd_gsg>` depending on your platform.
|
|
|
|
Running testpmd in Linux
|
|
------------------------
|
|
|
|
This section demonstrates how to setup and run ``testpmd`` in Linux.
|
|
|
|
#. Mount huge pages:
|
|
|
|
.. code-block:: console
|
|
|
|
mkdir /mnt/huge
|
|
mount -t hugetlbfs nodev /mnt/huge
|
|
|
|
#. Request huge pages:
|
|
|
|
Hugepage memory should be reserved as per application requirement. Check
|
|
hugepage size configured in the system and calculate the number of pages
|
|
required.
|
|
|
|
To reserve 1024 pages of 2MB:
|
|
|
|
.. code-block:: console
|
|
|
|
echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
|
|
|
|
.. note::
|
|
|
|
Check ``/proc/meminfo`` to find system hugepage size:
|
|
|
|
.. code-block:: console
|
|
|
|
grep "Hugepagesize:" /proc/meminfo
|
|
|
|
Example output:
|
|
|
|
.. code-block:: console
|
|
|
|
Hugepagesize: 2048 kB
|
|
|
|
#. Load ``igb_uio`` or ``vfio-pci`` driver:
|
|
|
|
.. code-block:: console
|
|
|
|
modprobe uio
|
|
insmod ./x86_64-native-linux-gcc/kmod/igb_uio.ko
|
|
|
|
or
|
|
|
|
.. code-block:: console
|
|
|
|
modprobe vfio-pci
|
|
|
|
#. Setup VFIO permissions for regular users before binding to ``vfio-pci``:
|
|
|
|
.. code-block:: console
|
|
|
|
sudo chmod a+x /dev/vfio
|
|
|
|
sudo chmod 0666 /dev/vfio/*
|
|
|
|
#. Bind the adapters to ``igb_uio`` or ``vfio-pci`` loaded in the previous step:
|
|
|
|
.. code-block:: console
|
|
|
|
./usertools/dpdk-devbind.py --bind igb_uio DEVICE1 DEVICE2 ...
|
|
|
|
Or setup VFIO permissions for regular users and then bind to ``vfio-pci``:
|
|
|
|
.. code-block:: console
|
|
|
|
./usertools/dpdk-devbind.py --bind vfio-pci DEVICE1 DEVICE2 ...
|
|
|
|
.. note::
|
|
|
|
DEVICE1, DEVICE2 are specified via PCI "domain:bus:slot.func" syntax or
|
|
"bus:slot.func" syntax.
|
|
|
|
#. Start ``testpmd`` with basic parameters:
|
|
|
|
.. code-block:: console
|
|
|
|
./x86_64-native-linux-gcc/app/testpmd -l 0-3 -n 4 -- -i
|
|
|
|
Successful execution will show initialization messages from EAL, PMD and
|
|
testpmd application. A prompt will be displayed at the end for user commands
|
|
as interactive mode (``-i``) is on.
|
|
|
|
.. code-block:: console
|
|
|
|
testpmd>
|
|
|
|
Refer to the :ref:`testpmd runtime functions <testpmd_runtime>` for a list
|
|
of available commands.
|
|
|
|
.. note::
|
|
When ``testpmd`` is built with shared library, use option ``-d`` to load
|
|
the dynamic PMD for ``rte_eal_init``.
|