4216cdc0e3
Add debug logs in various modules in axgbe Signed-off-by: Chandu Babu N <chandu@amd.com> Acked-by: Ravi Kumar <ravi1.kumar@amd.com>
342 lines
7.9 KiB
C
342 lines
7.9 KiB
C
/* SPDX-License-Identifier: BSD-3-Clause
|
|
* Copyright(c) 2018 Advanced Micro Devices, Inc. All rights reserved.
|
|
* Copyright(c) 2018 Synopsys, Inc. All rights reserved.
|
|
*/
|
|
|
|
#include "axgbe_ethdev.h"
|
|
#include "axgbe_common.h"
|
|
|
|
#define AXGBE_ABORT_COUNT 500
|
|
#define AXGBE_DISABLE_COUNT 1000
|
|
|
|
#define AXGBE_STD_SPEED 1
|
|
|
|
#define AXGBE_INTR_RX_FULL BIT(IC_RAW_INTR_STAT_RX_FULL_INDEX)
|
|
#define AXGBE_INTR_TX_EMPTY BIT(IC_RAW_INTR_STAT_TX_EMPTY_INDEX)
|
|
#define AXGBE_INTR_TX_ABRT BIT(IC_RAW_INTR_STAT_TX_ABRT_INDEX)
|
|
#define AXGBE_INTR_STOP_DET BIT(IC_RAW_INTR_STAT_STOP_DET_INDEX)
|
|
#define AXGBE_DEFAULT_INT_MASK (AXGBE_INTR_RX_FULL | \
|
|
AXGBE_INTR_TX_EMPTY | \
|
|
AXGBE_INTR_TX_ABRT | \
|
|
AXGBE_INTR_STOP_DET)
|
|
|
|
#define AXGBE_I2C_READ BIT(8)
|
|
#define AXGBE_I2C_STOP BIT(9)
|
|
|
|
static int axgbe_i2c_abort(struct axgbe_port *pdata)
|
|
{
|
|
unsigned int wait = AXGBE_ABORT_COUNT;
|
|
|
|
/* Must be enabled to recognize the abort request */
|
|
XI2C_IOWRITE_BITS(pdata, IC_ENABLE, EN, 1);
|
|
|
|
/* Issue the abort */
|
|
XI2C_IOWRITE_BITS(pdata, IC_ENABLE, ABORT, 1);
|
|
|
|
while (wait--) {
|
|
if (!XI2C_IOREAD_BITS(pdata, IC_ENABLE, ABORT))
|
|
return 0;
|
|
rte_delay_us(500);
|
|
}
|
|
|
|
return -EBUSY;
|
|
}
|
|
|
|
static int axgbe_i2c_set_enable(struct axgbe_port *pdata, bool enable)
|
|
{
|
|
unsigned int wait = AXGBE_DISABLE_COUNT;
|
|
unsigned int mode = enable ? 1 : 0;
|
|
|
|
while (wait--) {
|
|
XI2C_IOWRITE_BITS(pdata, IC_ENABLE, EN, mode);
|
|
if (XI2C_IOREAD_BITS(pdata, IC_ENABLE_STATUS, EN) == mode)
|
|
return 0;
|
|
|
|
rte_delay_us(100);
|
|
}
|
|
|
|
return -EBUSY;
|
|
}
|
|
|
|
static int axgbe_i2c_disable(struct axgbe_port *pdata)
|
|
{
|
|
unsigned int ret;
|
|
|
|
ret = axgbe_i2c_set_enable(pdata, false);
|
|
if (ret) {
|
|
/* Disable failed, try an abort */
|
|
ret = axgbe_i2c_abort(pdata);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Abort succeeded, try to disable again */
|
|
ret = axgbe_i2c_set_enable(pdata, false);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int axgbe_i2c_enable(struct axgbe_port *pdata)
|
|
{
|
|
return axgbe_i2c_set_enable(pdata, true);
|
|
}
|
|
|
|
static void axgbe_i2c_clear_all_interrupts(struct axgbe_port *pdata)
|
|
{
|
|
XI2C_IOREAD(pdata, IC_CLR_INTR);
|
|
}
|
|
|
|
static void axgbe_i2c_disable_interrupts(struct axgbe_port *pdata)
|
|
{
|
|
XI2C_IOWRITE(pdata, IC_INTR_MASK, 0);
|
|
}
|
|
|
|
static void axgbe_i2c_enable_interrupts(struct axgbe_port *pdata)
|
|
{
|
|
XI2C_IOWRITE(pdata, IC_INTR_MASK, AXGBE_DEFAULT_INT_MASK);
|
|
}
|
|
|
|
static void axgbe_i2c_write(struct axgbe_port *pdata)
|
|
{
|
|
struct axgbe_i2c_op_state *state = &pdata->i2c.op_state;
|
|
unsigned int tx_slots;
|
|
unsigned int cmd;
|
|
|
|
/* Configured to never receive Rx overflows, so fill up Tx fifo */
|
|
tx_slots = pdata->i2c.tx_fifo_size - XI2C_IOREAD(pdata, IC_TXFLR);
|
|
while (tx_slots && state->tx_len) {
|
|
if (state->op->cmd == AXGBE_I2C_CMD_READ)
|
|
cmd = AXGBE_I2C_READ;
|
|
else
|
|
cmd = *state->tx_buf++;
|
|
|
|
if (state->tx_len == 1)
|
|
XI2C_SET_BITS(cmd, IC_DATA_CMD, STOP, 1);
|
|
|
|
XI2C_IOWRITE(pdata, IC_DATA_CMD, cmd);
|
|
|
|
tx_slots--;
|
|
state->tx_len--;
|
|
}
|
|
|
|
/* No more Tx operations, so ignore TX_EMPTY and return */
|
|
if (!state->tx_len)
|
|
XI2C_IOWRITE_BITS(pdata, IC_INTR_MASK, TX_EMPTY, 0);
|
|
}
|
|
|
|
static void axgbe_i2c_read(struct axgbe_port *pdata)
|
|
{
|
|
struct axgbe_i2c_op_state *state = &pdata->i2c.op_state;
|
|
unsigned int rx_slots;
|
|
|
|
/* Anything to be read? */
|
|
if (state->op->cmd != AXGBE_I2C_CMD_READ)
|
|
return;
|
|
|
|
rx_slots = XI2C_IOREAD(pdata, IC_RXFLR);
|
|
while (rx_slots && state->rx_len) {
|
|
*state->rx_buf++ = XI2C_IOREAD(pdata, IC_DATA_CMD);
|
|
state->rx_len--;
|
|
rx_slots--;
|
|
}
|
|
}
|
|
|
|
static void axgbe_i2c_clear_isr_interrupts(struct axgbe_port *pdata,
|
|
unsigned int isr)
|
|
{
|
|
struct axgbe_i2c_op_state *state = &pdata->i2c.op_state;
|
|
|
|
if (isr & AXGBE_INTR_TX_ABRT) {
|
|
state->tx_abort_source = XI2C_IOREAD(pdata, IC_TX_ABRT_SOURCE);
|
|
XI2C_IOREAD(pdata, IC_CLR_TX_ABRT);
|
|
}
|
|
|
|
if (isr & AXGBE_INTR_STOP_DET)
|
|
XI2C_IOREAD(pdata, IC_CLR_STOP_DET);
|
|
}
|
|
|
|
static int axgbe_i2c_isr(struct axgbe_port *pdata)
|
|
{
|
|
struct axgbe_i2c_op_state *state = &pdata->i2c.op_state;
|
|
unsigned int isr;
|
|
|
|
isr = XI2C_IOREAD(pdata, IC_RAW_INTR_STAT);
|
|
|
|
PMD_DRV_LOG(DEBUG, "I2C interrupt received: status=%#010x\n", isr);
|
|
|
|
axgbe_i2c_clear_isr_interrupts(pdata, isr);
|
|
|
|
if (isr & AXGBE_INTR_TX_ABRT) {
|
|
PMD_DRV_LOG(DEBUG,
|
|
"I2C TX_ABRT received (%#010x) for target %#04x\n",
|
|
state->tx_abort_source, state->op->target);
|
|
|
|
axgbe_i2c_disable_interrupts(pdata);
|
|
|
|
state->ret = -EIO;
|
|
goto out;
|
|
}
|
|
|
|
/* Check for data in the Rx fifo */
|
|
axgbe_i2c_read(pdata);
|
|
|
|
/* Fill up the Tx fifo next */
|
|
axgbe_i2c_write(pdata);
|
|
|
|
out:
|
|
/* Complete on an error or STOP condition */
|
|
if (state->ret || XI2C_GET_BITS(isr, IC_RAW_INTR_STAT, STOP_DET))
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void axgbe_i2c_set_mode(struct axgbe_port *pdata)
|
|
{
|
|
unsigned int reg;
|
|
|
|
reg = XI2C_IOREAD(pdata, IC_CON);
|
|
XI2C_SET_BITS(reg, IC_CON, MASTER_MODE, 1);
|
|
XI2C_SET_BITS(reg, IC_CON, SLAVE_DISABLE, 1);
|
|
XI2C_SET_BITS(reg, IC_CON, RESTART_EN, 1);
|
|
XI2C_SET_BITS(reg, IC_CON, SPEED, AXGBE_STD_SPEED);
|
|
XI2C_SET_BITS(reg, IC_CON, RX_FIFO_FULL_HOLD, 1);
|
|
XI2C_IOWRITE(pdata, IC_CON, reg);
|
|
}
|
|
|
|
static void axgbe_i2c_get_features(struct axgbe_port *pdata)
|
|
{
|
|
struct axgbe_i2c *i2c = &pdata->i2c;
|
|
unsigned int reg;
|
|
|
|
reg = XI2C_IOREAD(pdata, IC_COMP_PARAM_1);
|
|
i2c->max_speed_mode = XI2C_GET_BITS(reg, IC_COMP_PARAM_1,
|
|
MAX_SPEED_MODE);
|
|
i2c->rx_fifo_size = XI2C_GET_BITS(reg, IC_COMP_PARAM_1,
|
|
RX_BUFFER_DEPTH);
|
|
i2c->tx_fifo_size = XI2C_GET_BITS(reg, IC_COMP_PARAM_1,
|
|
TX_BUFFER_DEPTH);
|
|
}
|
|
|
|
static void axgbe_i2c_set_target(struct axgbe_port *pdata, unsigned int addr)
|
|
{
|
|
XI2C_IOWRITE(pdata, IC_TAR, addr);
|
|
}
|
|
|
|
static int axgbe_i2c_xfer(struct axgbe_port *pdata, struct axgbe_i2c_op *op)
|
|
{
|
|
struct axgbe_i2c_op_state *state = &pdata->i2c.op_state;
|
|
int ret;
|
|
uint64_t timeout;
|
|
|
|
pthread_mutex_lock(&pdata->i2c_mutex);
|
|
ret = axgbe_i2c_disable(pdata);
|
|
if (ret) {
|
|
PMD_DRV_LOG(ERR, "failed to disable i2c master\n");
|
|
return ret;
|
|
}
|
|
|
|
axgbe_i2c_set_target(pdata, op->target);
|
|
|
|
memset(state, 0, sizeof(*state));
|
|
state->op = op;
|
|
state->tx_len = op->len;
|
|
state->tx_buf = (unsigned char *)op->buf;
|
|
state->rx_len = op->len;
|
|
state->rx_buf = (unsigned char *)op->buf;
|
|
|
|
axgbe_i2c_clear_all_interrupts(pdata);
|
|
ret = axgbe_i2c_enable(pdata);
|
|
if (ret) {
|
|
PMD_DRV_LOG(ERR, "failed to enable i2c master\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Enabling the interrupts will cause the TX FIFO empty interrupt to
|
|
* fire and begin to process the command via the ISR.
|
|
*/
|
|
axgbe_i2c_enable_interrupts(pdata);
|
|
timeout = rte_get_timer_cycles() + rte_get_timer_hz();
|
|
|
|
while (time_before(rte_get_timer_cycles(), timeout)) {
|
|
rte_delay_us(100);
|
|
if (XI2C_IOREAD(pdata, IC_RAW_INTR_STAT)) {
|
|
if (axgbe_i2c_isr(pdata))
|
|
goto success;
|
|
}
|
|
}
|
|
|
|
PMD_DRV_LOG(ERR, "i2c operation timed out\n");
|
|
axgbe_i2c_disable_interrupts(pdata);
|
|
axgbe_i2c_disable(pdata);
|
|
ret = -ETIMEDOUT;
|
|
goto unlock;
|
|
|
|
success:
|
|
ret = state->ret;
|
|
if (ret) {
|
|
if (state->tx_abort_source & IC_TX_ABRT_7B_ADDR_NOACK)
|
|
ret = -ENOTCONN;
|
|
else if (state->tx_abort_source & IC_TX_ABRT_ARB_LOST)
|
|
ret = -EAGAIN;
|
|
}
|
|
|
|
unlock:
|
|
pthread_mutex_unlock(&pdata->i2c_mutex);
|
|
return ret;
|
|
}
|
|
|
|
static void axgbe_i2c_stop(struct axgbe_port *pdata)
|
|
{
|
|
if (!pdata->i2c.started)
|
|
return;
|
|
|
|
PMD_DRV_LOG(DEBUG, "stopping I2C\n");
|
|
|
|
pdata->i2c.started = 0;
|
|
axgbe_i2c_disable_interrupts(pdata);
|
|
axgbe_i2c_disable(pdata);
|
|
axgbe_i2c_clear_all_interrupts(pdata);
|
|
}
|
|
|
|
static int axgbe_i2c_start(struct axgbe_port *pdata)
|
|
{
|
|
if (pdata->i2c.started)
|
|
return 0;
|
|
|
|
PMD_DRV_LOG(DEBUG, "starting I2C\n");
|
|
|
|
pdata->i2c.started = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int axgbe_i2c_init(struct axgbe_port *pdata)
|
|
{
|
|
int ret;
|
|
|
|
axgbe_i2c_disable_interrupts(pdata);
|
|
|
|
ret = axgbe_i2c_disable(pdata);
|
|
if (ret) {
|
|
PMD_DRV_LOG(ERR, "failed to disable i2c master\n");
|
|
return ret;
|
|
}
|
|
|
|
axgbe_i2c_get_features(pdata);
|
|
|
|
axgbe_i2c_set_mode(pdata);
|
|
|
|
axgbe_i2c_clear_all_interrupts(pdata);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void axgbe_init_function_ptrs_i2c(struct axgbe_i2c_if *i2c_if)
|
|
{
|
|
i2c_if->i2c_init = axgbe_i2c_init;
|
|
i2c_if->i2c_start = axgbe_i2c_start;
|
|
i2c_if->i2c_stop = axgbe_i2c_stop;
|
|
i2c_if->i2c_xfer = axgbe_i2c_xfer;
|
|
}
|