numam-dpdk/lib/librte_acl/rte_acl.h

/*-
 *   BSD LICENSE
 *
 *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
 *   All rights reserved.
 *
 *   Redistribution and use in source and binary forms, with or without
 *   modification, are permitted provided that the following conditions
 *   are met:
 *
 *     * Redistributions of source code must retain the above copyright
 *       notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright
 *       notice, this list of conditions and the following disclaimer in
 *       the documentation and/or other materials provided with the
 *       distribution.
 *     * Neither the name of Intel Corporation nor the names of its
 *       contributors may be used to endorse or promote products derived
 *       from this software without specific prior written permission.
 *
 *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#ifndef _RTE_ACL_H_
#define _RTE_ACL_H_

/**
 * @file
 *
 * RTE Classifier.
 */

#include <rte_acl_osdep.h>

#ifdef __cplusplus
extern "C" {
#endif

#define	RTE_ACL_MAX_CATEGORIES	16

#define	RTE_ACL_RESULTS_MULTIPLIER	(XMM_SIZE / sizeof(uint32_t))

#define RTE_ACL_MAX_LEVELS 64
#define RTE_ACL_MAX_FIELDS 64

union rte_acl_field_types {
	uint8_t  u8;
	uint16_t u16;
	uint32_t u32;
	uint64_t u64;
};

enum {
	RTE_ACL_FIELD_TYPE_MASK = 0,
	RTE_ACL_FIELD_TYPE_RANGE,
	RTE_ACL_FIELD_TYPE_BITMASK
};

/**
 * ACL Field defintion.
 * Each field in the ACL rule has an associate definition.
 * It defines the type of field, its size, its offset in the input buffer,
 * the field index, and the input index.
 * For performance reasons, the inner loop of the search function is unrolled
 * to process four input bytes at a time. This requires the input to be grouped
 * into sets of 4 consecutive bytes. The loop processes the first input byte as
 * part of the setup and then subsequent bytes must be in groups of 4
 * consecutive bytes.
 */
struct rte_acl_field_def {
	uint8_t  type;        /**< type - RTE_ACL_FIELD_TYPE_*. */
	uint8_t	 size;        /**< size of field 1,2,4, or 8. */
	uint8_t	 field_index; /**< index of field inside the rule. */
	uint8_t  input_index; /**< 0-N input index. */
	uint32_t offset;      /**< offset to start of field. */
};

/**
 * ACL build configuration.
 * Defines the fields of an ACL trie and number of categories to build with.
 */
struct rte_acl_config {
	uint32_t num_categories; /**< Number of categories to build with. */
	uint32_t num_fields;     /**< Number of field definitions. */
	struct rte_acl_field_def defs[RTE_ACL_MAX_FIELDS];
	/**< array of field definitions. */
};

/**
 * Defines the value of a field for a rule.
 */
struct rte_acl_field {
	union rte_acl_field_types value;
	/**< a 1,2,4, or 8 byte value of the field. */
	union rte_acl_field_types mask_range;
	/**<
	 * depending on field type:
	 * mask -> 1.2.3.4/32 value=0x1020304, mask_range=32,
	 * range -> 0 : 65535 value=0, mask_range=65535,
	 * bitmask -> 0x06/0xff value=6, mask_range=0xff.
	 */
};

enum {
	RTE_ACL_TYPE_SHIFT = 29,
	RTE_ACL_MAX_INDEX = LEN2MASK(RTE_ACL_TYPE_SHIFT),
	RTE_ACL_MAX_PRIORITY = RTE_ACL_MAX_INDEX,
	RTE_ACL_MIN_PRIORITY = 0,
};

#define	RTE_ACL_INVALID_USERDATA	0

/**
 * Miscellaneous data for ACL rule.
 */
struct rte_acl_rule_data {
	uint32_t category_mask; /**< Mask of categories for that rule. */
	int32_t  priority;      /**< Priority for that rule. */
	uint32_t userdata;      /**< Associated with the rule user data. */
};

/**
 * Defines single ACL rule.
 * data - miscellaneous data for the rule.
 * field[] - value and mask or range for each field.
 */
#define	RTE_ACL_RULE_DEF(name, fld_num)	struct name {\
	struct rte_acl_rule_data data;               \
	struct rte_acl_field field[fld_num];         \
}

RTE_ACL_RULE_DEF(rte_acl_rule, 0);

#define	RTE_ACL_RULE_SZ(fld_num)	\
	(sizeof(struct rte_acl_rule) + sizeof(struct rte_acl_field) * (fld_num))


/** Max number of characters in name.*/
#define	RTE_ACL_NAMESIZE		32

/**
 * Parameters used when creating the ACL context.
 */
struct rte_acl_param {
	const char *name;         /**< Name of the ACL context. */
	int         socket_id;    /**< Socket ID to allocate memory for. */
	uint32_t    rule_size;    /**< Size of each rule. */
	uint32_t    max_rule_num; /**< Maximum number of rules. */
};


/**
 * Create a new ACL context.
 *
 * @param param
 *   Parameters used to create and initialise the ACL context.
 * @return
 *   Pointer to ACL context structure that is used in future ACL
 *   operations, or NULL on error, with error code set in rte_errno.
 *   Possible rte_errno errors include:
 *   - E_RTE_NO_TAILQ - no tailq list could be got for the ACL context list
 *   - EINVAL - invalid parameter passed to function
 */
struct rte_acl_ctx *
rte_acl_create(const struct rte_acl_param *param);

/**
 * Find an existing ACL context object and return a pointer to it.
 *
 * @param name
 *   Name of the ACL context as passed to rte_acl_create()
 * @return
 *   Pointer to ACL context or NULL if object not found
 *   with rte_errno set appropriately. Possible rte_errno values include:
 *    - ENOENT - value not available for return
 */
struct rte_acl_ctx *
rte_acl_find_existing(const char *name);

/**
 * De-allocate all memory used by ACL context.
 *
 * @param ctx
 *   ACL context to free
 */
void
rte_acl_free(struct rte_acl_ctx *ctx);

/**
 * Add rules to an existing ACL context.
 * This function is not multi-thread safe.
 *
 * @param ctx
 *   ACL context to add patterns to.
 * @param rules
 *   Array of rules to add to the ACL context.
 *   Note that all fields in rte_acl_rule structures are expected
 *   to be in host byte order.
 *   Each rule expected to be in the same format and not exceed size
 *   specified at ACL context creation time.
 * @param num
 *   Number of elements in the input array of rules.
 * @return
 *   - -ENOMEM if there is no space in the ACL context for these rules.
 *   - -EINVAL if the parameters are invalid.
 *   - Zero if operation completed successfully.
 */
int
rte_acl_add_rules(struct rte_acl_ctx *ctx, const struct rte_acl_rule *rules,
	uint32_t num);

/**
 * Delete all rules from the ACL context.
 * This function is not multi-thread safe.
 * Note that internal run-time structures are not affected.
 *
 * @param ctx
 *   ACL context to delete rules from.
 */
void
rte_acl_reset_rules(struct rte_acl_ctx *ctx);

/**
 * Analyze set of rules and build required internal run-time structures.
 * This function is not multi-thread safe.
 *
 * @param ctx
 *   ACL context to build.
 * @param cfg
 *   Pointer to struct rte_acl_config - defines build parameters.
 * @return
 *   - -ENOMEM if couldn't allocate enough memory.
 *   - -EINVAL if the parameters are invalid.
 *   - Negative error code if operation failed.
 *   - Zero if operation completed successfully.
 */
int
rte_acl_build(struct rte_acl_ctx *ctx, const struct rte_acl_config *cfg);

/**
 * Delete all rules from the ACL context and
 * destroy all internal run-time structures.
 * This function is not multi-thread safe.
 *
 * @param ctx
 *   ACL context to reset.
 */
void
rte_acl_reset(struct rte_acl_ctx *ctx);

/**
 *  Avaialble implementations of ACL classify.
 */
enum rte_acl_classify_alg {
	RTE_ACL_CLASSIFY_DEFAULT = 0,
	RTE_ACL_CLASSIFY_SCALAR = 1,  /**< generic implementation. */
	RTE_ACL_CLASSIFY_SSE = 2,     /**< requries SSE4.1 support. */
};

/**
 * Perform search for a matching ACL rule for each input data buffer.
 * Each input data buffer can have up to *categories* matches.
 * That implies that results array should be big enough to hold
 * (categories * num) elements.
 * Also categories parameter should be either one or multiple of
 * RTE_ACL_RESULTS_MULTIPLIER and can't be bigger than RTE_ACL_MAX_CATEGORIES.
 * If more than one rule is applicable for given input buffer and
 * given category, then rule with highest priority will be returned as a match.
 * Note, that it is a caller's responsibility to ensure that input parameters
 * are valid and point to correct memory locations.
 *
 * @param ctx
 *   ACL context to search with.
 * @param data
 *   Array of pointers to input data buffers to perform search.
 *   Note that all fields in input data buffers supposed to be in network
 *   byte order (MSB).
 * @param results
 *   Array of search results, *categories* results per each input data buffer.
 * @param num
 *   Number of elements in the input data buffers array.
 * @param categories
 *   Number of maximum possible matches for each input buffer, one possible
 *   match per category.
 * @return
 *   zero on successful completion.
 *   -EINVAL for incorrect arguments.
 */
extern int
rte_acl_classify(const struct rte_acl_ctx *ctx,
		 const uint8_t **data,
		 uint32_t *results, uint32_t num,
		 uint32_t categories);

/**
 * Perform search using specified algorithm for a matching ACL rule for
 * each input data buffer.
 * Each input data buffer can have up to *categories* matches.
 * That implies that results array should be big enough to hold
 * (categories * num) elements.
 * Also categories parameter should be either one or multiple of
 * RTE_ACL_RESULTS_MULTIPLIER and can't be bigger than RTE_ACL_MAX_CATEGORIES.
 * If more than one rule is applicable for given input buffer and
 * given category, then rule with highest priority will be returned as a match.
 * Note, that it is a caller's responsibility to ensure that input parameters
 * are valid and point to correct memory locations.
 *
 * @param ctx
 *   ACL context to search with.
 * @param data
 *   Array of pointers to input data buffers to perform search.
 *   Note that all fields in input data buffers supposed to be in network
 *   byte order (MSB).
 * @param results
 *   Array of search results, *categories* results per each input data buffer.
 * @param num
 *   Number of elements in the input data buffers array.
 * @param categories
 *   Number of maximum possible matches for each input buffer, one possible
 *   match per category.
 * @param alg
 *   Algorithm to be used for the search.
 *   It is the caller responibility to ensure that the value refers to the
 *   existing algorithm, and that it could be run on the given CPU.
 * @return
 *   zero on successful completion.
 *   -EINVAL for incorrect arguments.
 */
extern int
rte_acl_classify_alg(const struct rte_acl_ctx *ctx,
		 const uint8_t **data,
		 uint32_t *results, uint32_t num,
		 uint32_t categories,
		 enum rte_acl_classify_alg alg);

/*
 * Override the default classifier function for a given ACL context.
 * @param ctx
 *   ACL context to change classify function for.
 * @param alg
 *   New default classify algorithm for given ACL context.
 *   It is the caller responibility to ensure that the value refers to the
 *   existing algorithm, and that it could be run on the given CPU.
 * @return
 *   - -EINVAL if the parameters are invalid.
 *   - Zero if operation completed successfully.
 */
extern int
rte_acl_set_ctx_classify(struct rte_acl_ctx *ctx,
	enum rte_acl_classify_alg alg);

/**
 * Dump an ACL context structure to the console.
 *
 * @param ctx
 *   ACL context to dump.
 */
void
rte_acl_dump(const struct rte_acl_ctx *ctx);

/**
 * Dump all ACL context structures to the console.
 */
void
rte_acl_list_dump(void);

/**
 * Legacy support for 7-tuple IPv4 and VLAN rule.
 * This structure and corresponding API is deprecated.
 */
struct rte_acl_ipv4vlan_rule {
	struct rte_acl_rule_data data; /**< Miscellaneous data for the rule. */
	uint8_t proto;                 /**< IPv4 protocol ID. */
	uint8_t proto_mask;            /**< IPv4 protocol ID mask. */
	uint16_t vlan;                 /**< VLAN ID. */
	uint16_t vlan_mask;            /**< VLAN ID mask. */
	uint16_t domain;               /**< VLAN domain. */
	uint16_t domain_mask;          /**< VLAN domain mask. */
	uint32_t src_addr;             /**< IPv4 source address. */
	uint32_t src_mask_len;         /**< IPv4 source address mask. */
	uint32_t dst_addr;             /**< IPv4 destination address. */
	uint32_t dst_mask_len;         /**< IPv4 destination address mask. */
	uint16_t src_port_low;         /**< L4 source port low. */
	uint16_t src_port_high;        /**< L4 source port high. */
	uint16_t dst_port_low;         /**< L4 destination port low. */
	uint16_t dst_port_high;        /**< L4 destination port high. */
};

/**
 * Specifies fields layout inside rte_acl_rule for rte_acl_ipv4vlan_rule.
 */
enum {
	RTE_ACL_IPV4VLAN_PROTO_FIELD,
	RTE_ACL_IPV4VLAN_VLAN1_FIELD,
	RTE_ACL_IPV4VLAN_VLAN2_FIELD,
	RTE_ACL_IPV4VLAN_SRC_FIELD,
	RTE_ACL_IPV4VLAN_DST_FIELD,
	RTE_ACL_IPV4VLAN_SRCP_FIELD,
	RTE_ACL_IPV4VLAN_DSTP_FIELD,
	RTE_ACL_IPV4VLAN_NUM_FIELDS
};

/**
 * Macro to define rule size for rte_acl_ipv4vlan_rule.
 */
#define	RTE_ACL_IPV4VLAN_RULE_SZ	\
	RTE_ACL_RULE_SZ(RTE_ACL_IPV4VLAN_NUM_FIELDS)

/*
 * That effectively defines order of IPV4VLAN classifications:
 *  - PROTO
 *  - VLAN (TAG and DOMAIN)
 *  - SRC IP ADDRESS
 *  - DST IP ADDRESS
 *  - PORTS (SRC and DST)
 */
enum {
	RTE_ACL_IPV4VLAN_PROTO,
	RTE_ACL_IPV4VLAN_VLAN,
	RTE_ACL_IPV4VLAN_SRC,
	RTE_ACL_IPV4VLAN_DST,
	RTE_ACL_IPV4VLAN_PORTS,
	RTE_ACL_IPV4VLAN_NUM
};

/**
 * Add ipv4vlan rules to an existing ACL context.
 * This function is not multi-thread safe.
 *
 * @param ctx
 *   ACL context to add patterns to.
 * @param rules
 *   Array of rules to add to the ACL context.
 *   Note that all fields in rte_acl_ipv4vlan_rule structures are expected
 *   to be in host byte order.
 * @param num
 *   Number of elements in the input array of rules.
 * @return
 *   - -ENOMEM if there is no space in the ACL context for these rules.
 *   - -EINVAL if the parameters are invalid.
 *   - Zero if operation completed successfully.
 */
int
rte_acl_ipv4vlan_add_rules(struct rte_acl_ctx *ctx,
	const struct rte_acl_ipv4vlan_rule *rules,
	uint32_t num);

/**
 * Analyze set of ipv4vlan rules and build required internal
 * run-time structures.
 * This function is not multi-thread safe.
 *
 * @param ctx
 *   ACL context to build.
 * @param layout
 *   Layout of input data to search through.
 * @param num_categories
 *   Maximum number of categories to use in that build.
 * @return
 *   - -ENOMEM if couldn't allocate enough memory.
 *   - -EINVAL if the parameters are invalid.
 *   - Negative error code if operation failed.
 *   - Zero if operation completed successfully.
 */
int
rte_acl_ipv4vlan_build(struct rte_acl_ctx *ctx,
	const uint32_t layout[RTE_ACL_IPV4VLAN_NUM],
	uint32_t num_categories);


#ifdef __cplusplus
}
#endif

#endif /* _RTE_ACL_H_ */