a9963a86b2
Several NICs can handle 512 entries/queues in their RETA table, an 8 bit field is not large enough for them. Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com> Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
3888 lines
137 KiB
C
3888 lines
137 KiB
C
/*-
|
|
* BSD LICENSE
|
|
*
|
|
* Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* * Neither the name of Intel Corporation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#ifndef _RTE_ETHDEV_H_
|
|
#define _RTE_ETHDEV_H_
|
|
|
|
/**
|
|
* @file
|
|
*
|
|
* RTE Ethernet Device API
|
|
*
|
|
* The Ethernet Device API is composed of two parts:
|
|
*
|
|
* - The application-oriented Ethernet API that includes functions to setup
|
|
* an Ethernet device (configure it, setup its RX and TX queues and start it),
|
|
* to get its MAC address, the speed and the status of its physical link,
|
|
* to receive and to transmit packets, and so on.
|
|
*
|
|
* - The driver-oriented Ethernet API that exports a function allowing
|
|
* an Ethernet Poll Mode Driver (PMD) to simultaneously register itself as
|
|
* an Ethernet device driver and as a PCI driver for a set of matching PCI
|
|
* [Ethernet] devices classes.
|
|
*
|
|
* By default, all the functions of the Ethernet Device API exported by a PMD
|
|
* are lock-free functions which assume to not be invoked in parallel on
|
|
* different logical cores to work on the same target object. For instance,
|
|
* the receive function of a PMD cannot be invoked in parallel on two logical
|
|
* cores to poll the same RX queue [of the same port]. Of course, this function
|
|
* can be invoked in parallel by different logical cores on different RX queues.
|
|
* It is the responsibility of the upper level application to enforce this rule.
|
|
*
|
|
* If needed, parallel accesses by multiple logical cores to shared queues
|
|
* shall be explicitly protected by dedicated inline lock-aware functions
|
|
* built on top of their corresponding lock-free functions of the PMD API.
|
|
*
|
|
* In all functions of the Ethernet API, the Ethernet device is
|
|
* designated by an integer >= 0 named the device port identifier.
|
|
*
|
|
* At the Ethernet driver level, Ethernet devices are represented by a generic
|
|
* data structure of type *rte_eth_dev*.
|
|
*
|
|
* Ethernet devices are dynamically registered during the PCI probing phase
|
|
* performed at EAL initialization time.
|
|
* When an Ethernet device is being probed, an *rte_eth_dev* structure and
|
|
* a new port identifier are allocated for that device. Then, the eth_dev_init()
|
|
* function supplied by the Ethernet driver matching the probed PCI
|
|
* device is invoked to properly initialize the device.
|
|
*
|
|
* The role of the device init function consists of resetting the hardware,
|
|
* checking access to Non-volatile Memory (NVM), reading the MAC address
|
|
* from NVM etc.
|
|
*
|
|
* If the device init operation is successful, the correspondence between
|
|
* the port identifier assigned to the new device and its associated
|
|
* *rte_eth_dev* structure is effectively registered.
|
|
* Otherwise, both the *rte_eth_dev* structure and the port identifier are
|
|
* freed.
|
|
*
|
|
* The functions exported by the application Ethernet API to setup a device
|
|
* designated by its port identifier must be invoked in the following order:
|
|
* - rte_eth_dev_configure()
|
|
* - rte_eth_tx_queue_setup()
|
|
* - rte_eth_rx_queue_setup()
|
|
* - rte_eth_dev_start()
|
|
*
|
|
* Then, the network application can invoke, in any order, the functions
|
|
* exported by the Ethernet API to get the MAC address of a given device, to
|
|
* get the speed and the status of a device physical link, to receive/transmit
|
|
* [burst of] packets, and so on.
|
|
*
|
|
* If the application wants to change the configuration (i.e. call
|
|
* rte_eth_dev_configure(), rte_eth_tx_queue_setup(), or
|
|
* rte_eth_rx_queue_setup()), it must call rte_eth_dev_stop() first to stop the
|
|
* device and then do the reconfiguration before calling rte_eth_dev_start()
|
|
* again. The tramsit and receive functions should not be invoked when the
|
|
* device is stopped.
|
|
*
|
|
* Please note that some configuration is not stored between calls to
|
|
* rte_eth_dev_stop()/rte_eth_dev_start(). The following configuration will
|
|
* be retained:
|
|
*
|
|
* - flow control settings
|
|
* - receive mode configuration (promiscuous mode, hardware checksum mode,
|
|
* RSS/VMDQ settings etc.)
|
|
* - VLAN filtering configuration
|
|
* - MAC addresses supplied to MAC address array
|
|
* - flow director filtering mode (but not filtering rules)
|
|
* - NIC queue statistics mappings
|
|
*
|
|
* Any other configuration will not be stored and will need to be re-entered
|
|
* after a call to rte_eth_dev_start().
|
|
*
|
|
* Finally, a network application can close an Ethernet device by invoking the
|
|
* rte_eth_dev_close() function.
|
|
*
|
|
* Each function of the application Ethernet API invokes a specific function
|
|
* of the PMD that controls the target device designated by its port
|
|
* identifier.
|
|
* For this purpose, all device-specific functions of an Ethernet driver are
|
|
* supplied through a set of pointers contained in a generic structure of type
|
|
* *eth_dev_ops*.
|
|
* The address of the *eth_dev_ops* structure is stored in the *rte_eth_dev*
|
|
* structure by the device init function of the Ethernet driver, which is
|
|
* invoked during the PCI probing phase, as explained earlier.
|
|
*
|
|
* In other words, each function of the Ethernet API simply retrieves the
|
|
* *rte_eth_dev* structure associated with the device port identifier and
|
|
* performs an indirect invocation of the corresponding driver function
|
|
* supplied in the *eth_dev_ops* structure of the *rte_eth_dev* structure.
|
|
*
|
|
* For performance reasons, the address of the burst-oriented RX and TX
|
|
* functions of the Ethernet driver are not contained in the *eth_dev_ops*
|
|
* structure. Instead, they are directly stored at the beginning of the
|
|
* *rte_eth_dev* structure to avoid an extra indirect memory access during
|
|
* their invocation.
|
|
*
|
|
* RTE ethernet device drivers do not use interrupts for transmitting or
|
|
* receiving. Instead, Ethernet drivers export Poll-Mode receive and transmit
|
|
* functions to applications.
|
|
* Both receive and transmit functions are packet-burst oriented to minimize
|
|
* their cost per packet through the following optimizations:
|
|
*
|
|
* - Sharing among multiple packets the incompressible cost of the
|
|
* invocation of receive/transmit functions.
|
|
*
|
|
* - Enabling receive/transmit functions to take advantage of burst-oriented
|
|
* hardware features (L1 cache, prefetch instructions, NIC head/tail
|
|
* registers) to minimize the number of CPU cycles per packet, for instance,
|
|
* by avoiding useless read memory accesses to ring descriptors, or by
|
|
* systematically using arrays of pointers that exactly fit L1 cache line
|
|
* boundaries and sizes.
|
|
*
|
|
* The burst-oriented receive function does not provide any error notification,
|
|
* to avoid the corresponding overhead. As a hint, the upper-level application
|
|
* might check the status of the device link once being systematically returned
|
|
* a 0 value by the receive function of the driver for a given number of tries.
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
#include <stdint.h>
|
|
|
|
#include <rte_dev.h>
|
|
|
|
/* Use this macro to check if LRO API is supported */
|
|
#define RTE_ETHDEV_HAS_LRO_SUPPORT
|
|
|
|
#include <rte_log.h>
|
|
#include <rte_interrupts.h>
|
|
#include <rte_pci.h>
|
|
#include <rte_dev.h>
|
|
#include <rte_devargs.h>
|
|
#include "rte_ether.h"
|
|
#include "rte_eth_ctrl.h"
|
|
#include "rte_dev_info.h"
|
|
|
|
struct rte_mbuf;
|
|
|
|
/**
|
|
* A structure used to retrieve statistics for an Ethernet port.
|
|
*/
|
|
struct rte_eth_stats {
|
|
uint64_t ipackets; /**< Total number of successfully received packets. */
|
|
uint64_t opackets; /**< Total number of successfully transmitted packets.*/
|
|
uint64_t ibytes; /**< Total number of successfully received bytes. */
|
|
uint64_t obytes; /**< Total number of successfully transmitted bytes. */
|
|
uint64_t imissed;
|
|
/**< Total of RX packets dropped by the HW,
|
|
* because there are no available mbufs (i.e. RX queues are full).
|
|
*/
|
|
uint64_t ibadcrc __rte_deprecated;
|
|
/**< Deprecated; Total of RX packets with CRC error. */
|
|
uint64_t ibadlen __rte_deprecated;
|
|
/**< Deprecated; Total of RX packets with bad length. */
|
|
uint64_t ierrors; /**< Total number of erroneous received packets. */
|
|
uint64_t oerrors; /**< Total number of failed transmitted packets. */
|
|
uint64_t imcasts;
|
|
/**< Deprecated; Total number of multicast received packets. */
|
|
uint64_t rx_nombuf; /**< Total number of RX mbuf allocation failures. */
|
|
uint64_t fdirmatch __rte_deprecated;
|
|
/**< Deprecated; Total number of RX packets matching a filter. */
|
|
uint64_t fdirmiss __rte_deprecated;
|
|
/**< Deprecated; Total number of RX packets not matching any filter. */
|
|
uint64_t tx_pause_xon __rte_deprecated;
|
|
/**< Deprecated; Total nb. of XON pause frame sent. */
|
|
uint64_t rx_pause_xon __rte_deprecated;
|
|
/**< Deprecated; Total nb. of XON pause frame received. */
|
|
uint64_t tx_pause_xoff __rte_deprecated;
|
|
/**< Deprecated; Total nb. of XOFF pause frame sent. */
|
|
uint64_t rx_pause_xoff __rte_deprecated;
|
|
/**< Deprecated; Total nb. of XOFF pause frame received. */
|
|
uint64_t q_ipackets[RTE_ETHDEV_QUEUE_STAT_CNTRS];
|
|
/**< Total number of queue RX packets. */
|
|
uint64_t q_opackets[RTE_ETHDEV_QUEUE_STAT_CNTRS];
|
|
/**< Total number of queue TX packets. */
|
|
uint64_t q_ibytes[RTE_ETHDEV_QUEUE_STAT_CNTRS];
|
|
/**< Total number of successfully received queue bytes. */
|
|
uint64_t q_obytes[RTE_ETHDEV_QUEUE_STAT_CNTRS];
|
|
/**< Total number of successfully transmitted queue bytes. */
|
|
uint64_t q_errors[RTE_ETHDEV_QUEUE_STAT_CNTRS];
|
|
/**< Total number of queue packets received that are dropped. */
|
|
uint64_t ilbpackets;
|
|
/**< Total number of good packets received from loopback,VF Only */
|
|
uint64_t olbpackets;
|
|
/**< Total number of good packets transmitted to loopback,VF Only */
|
|
uint64_t ilbbytes;
|
|
/**< Total number of good bytes received from loopback,VF Only */
|
|
uint64_t olbbytes;
|
|
/**< Total number of good bytes transmitted to loopback,VF Only */
|
|
};
|
|
|
|
/**
|
|
* A structure used to retrieve link-level information of an Ethernet port.
|
|
*/
|
|
struct rte_eth_link {
|
|
uint16_t link_speed; /**< ETH_LINK_SPEED_[10, 100, 1000, 10000] */
|
|
uint16_t link_duplex; /**< ETH_LINK_[HALF_DUPLEX, FULL_DUPLEX] */
|
|
uint8_t link_status : 1; /**< 1 -> link up, 0 -> link down */
|
|
}__attribute__((aligned(8))); /**< aligned for atomic64 read/write */
|
|
|
|
#define ETH_LINK_SPEED_AUTONEG 0 /**< Auto-negotiate link speed. */
|
|
#define ETH_LINK_SPEED_10 10 /**< 10 megabits/second. */
|
|
#define ETH_LINK_SPEED_100 100 /**< 100 megabits/second. */
|
|
#define ETH_LINK_SPEED_1000 1000 /**< 1 gigabits/second. */
|
|
#define ETH_LINK_SPEED_10000 10000 /**< 10 gigabits/second. */
|
|
#define ETH_LINK_SPEED_10G 10000 /**< alias of 10 gigabits/second. */
|
|
#define ETH_LINK_SPEED_20G 20000 /**< 20 gigabits/second. */
|
|
#define ETH_LINK_SPEED_40G 40000 /**< 40 gigabits/second. */
|
|
|
|
#define ETH_LINK_AUTONEG_DUPLEX 0 /**< Auto-negotiate duplex. */
|
|
#define ETH_LINK_HALF_DUPLEX 1 /**< Half-duplex connection. */
|
|
#define ETH_LINK_FULL_DUPLEX 2 /**< Full-duplex connection. */
|
|
|
|
/**
|
|
* A structure used to configure the ring threshold registers of an RX/TX
|
|
* queue for an Ethernet port.
|
|
*/
|
|
struct rte_eth_thresh {
|
|
uint8_t pthresh; /**< Ring prefetch threshold. */
|
|
uint8_t hthresh; /**< Ring host threshold. */
|
|
uint8_t wthresh; /**< Ring writeback threshold. */
|
|
};
|
|
|
|
/**
|
|
* Simple flags are used for rte_eth_conf.rxmode.mq_mode.
|
|
*/
|
|
#define ETH_MQ_RX_RSS_FLAG 0x1
|
|
#define ETH_MQ_RX_DCB_FLAG 0x2
|
|
#define ETH_MQ_RX_VMDQ_FLAG 0x4
|
|
|
|
/**
|
|
* A set of values to identify what method is to be used to route
|
|
* packets to multiple queues.
|
|
*/
|
|
enum rte_eth_rx_mq_mode {
|
|
/** None of DCB,RSS or VMDQ mode */
|
|
ETH_MQ_RX_NONE = 0,
|
|
|
|
/** For RX side, only RSS is on */
|
|
ETH_MQ_RX_RSS = ETH_MQ_RX_RSS_FLAG,
|
|
/** For RX side,only DCB is on. */
|
|
ETH_MQ_RX_DCB = ETH_MQ_RX_DCB_FLAG,
|
|
/** Both DCB and RSS enable */
|
|
ETH_MQ_RX_DCB_RSS = ETH_MQ_RX_RSS_FLAG | ETH_MQ_RX_DCB_FLAG,
|
|
|
|
/** Only VMDQ, no RSS nor DCB */
|
|
ETH_MQ_RX_VMDQ_ONLY = ETH_MQ_RX_VMDQ_FLAG,
|
|
/** RSS mode with VMDQ */
|
|
ETH_MQ_RX_VMDQ_RSS = ETH_MQ_RX_RSS_FLAG | ETH_MQ_RX_VMDQ_FLAG,
|
|
/** Use VMDQ+DCB to route traffic to queues */
|
|
ETH_MQ_RX_VMDQ_DCB = ETH_MQ_RX_VMDQ_FLAG | ETH_MQ_RX_DCB_FLAG,
|
|
/** Enable both VMDQ and DCB in VMDq */
|
|
ETH_MQ_RX_VMDQ_DCB_RSS = ETH_MQ_RX_RSS_FLAG | ETH_MQ_RX_DCB_FLAG |
|
|
ETH_MQ_RX_VMDQ_FLAG,
|
|
};
|
|
|
|
/**
|
|
* for rx mq mode backward compatible
|
|
*/
|
|
#define ETH_RSS ETH_MQ_RX_RSS
|
|
#define VMDQ_DCB ETH_MQ_RX_VMDQ_DCB
|
|
#define ETH_DCB_RX ETH_MQ_RX_DCB
|
|
|
|
/**
|
|
* A set of values to identify what method is to be used to transmit
|
|
* packets using multi-TCs.
|
|
*/
|
|
enum rte_eth_tx_mq_mode {
|
|
ETH_MQ_TX_NONE = 0, /**< It is in neither DCB nor VT mode. */
|
|
ETH_MQ_TX_DCB, /**< For TX side,only DCB is on. */
|
|
ETH_MQ_TX_VMDQ_DCB, /**< For TX side,both DCB and VT is on. */
|
|
ETH_MQ_TX_VMDQ_ONLY, /**< Only VT on, no DCB */
|
|
};
|
|
|
|
/**
|
|
* for tx mq mode backward compatible
|
|
*/
|
|
#define ETH_DCB_NONE ETH_MQ_TX_NONE
|
|
#define ETH_VMDQ_DCB_TX ETH_MQ_TX_VMDQ_DCB
|
|
#define ETH_DCB_TX ETH_MQ_TX_DCB
|
|
|
|
/**
|
|
* A structure used to configure the RX features of an Ethernet port.
|
|
*/
|
|
struct rte_eth_rxmode {
|
|
/** The multi-queue packet distribution mode to be used, e.g. RSS. */
|
|
enum rte_eth_rx_mq_mode mq_mode;
|
|
uint32_t max_rx_pkt_len; /**< Only used if jumbo_frame enabled. */
|
|
uint16_t split_hdr_size; /**< hdr buf size (header_split enabled).*/
|
|
uint16_t header_split : 1, /**< Header Split enable. */
|
|
hw_ip_checksum : 1, /**< IP/UDP/TCP checksum offload enable. */
|
|
hw_vlan_filter : 1, /**< VLAN filter enable. */
|
|
hw_vlan_strip : 1, /**< VLAN strip enable. */
|
|
hw_vlan_extend : 1, /**< Extended VLAN enable. */
|
|
jumbo_frame : 1, /**< Jumbo Frame Receipt enable. */
|
|
hw_strip_crc : 1, /**< Enable CRC stripping by hardware. */
|
|
enable_scatter : 1, /**< Enable scatter packets rx handler */
|
|
enable_lro : 1; /**< Enable LRO */
|
|
};
|
|
|
|
/**
|
|
* A structure used to configure the Receive Side Scaling (RSS) feature
|
|
* of an Ethernet port.
|
|
* If not NULL, the *rss_key* pointer of the *rss_conf* structure points
|
|
* to an array holding the RSS key to use for hashing specific header
|
|
* fields of received packets. The length of this array should be indicated
|
|
* by *rss_key_len* below. Otherwise, a default random hash key is used by
|
|
* the device driver.
|
|
*
|
|
* The *rss_key_len* field of the *rss_conf* structure indicates the length
|
|
* in bytes of the array pointed by *rss_key*. To be compatible, this length
|
|
* will be checked in i40e only. Others assume 40 bytes to be used as before.
|
|
*
|
|
* The *rss_hf* field of the *rss_conf* structure indicates the different
|
|
* types of IPv4/IPv6 packets to which the RSS hashing must be applied.
|
|
* Supplying an *rss_hf* equal to zero disables the RSS feature.
|
|
*/
|
|
struct rte_eth_rss_conf {
|
|
uint8_t *rss_key; /**< If not NULL, 40-byte hash key. */
|
|
uint8_t rss_key_len; /**< hash key length in bytes. */
|
|
uint64_t rss_hf; /**< Hash functions to apply - see below. */
|
|
};
|
|
|
|
/*
|
|
* The RSS offload types are defined based on flow types which are defined
|
|
* in rte_eth_ctrl.h. Different NIC hardwares may support different RSS offload
|
|
* types. The supported flow types or RSS offload types can be queried by
|
|
* rte_eth_dev_info_get().
|
|
*/
|
|
#define ETH_RSS_IPV4 (1ULL << RTE_ETH_FLOW_IPV4)
|
|
#define ETH_RSS_FRAG_IPV4 (1ULL << RTE_ETH_FLOW_FRAG_IPV4)
|
|
#define ETH_RSS_NONFRAG_IPV4_TCP (1ULL << RTE_ETH_FLOW_NONFRAG_IPV4_TCP)
|
|
#define ETH_RSS_NONFRAG_IPV4_UDP (1ULL << RTE_ETH_FLOW_NONFRAG_IPV4_UDP)
|
|
#define ETH_RSS_NONFRAG_IPV4_SCTP (1ULL << RTE_ETH_FLOW_NONFRAG_IPV4_SCTP)
|
|
#define ETH_RSS_NONFRAG_IPV4_OTHER (1ULL << RTE_ETH_FLOW_NONFRAG_IPV4_OTHER)
|
|
#define ETH_RSS_IPV6 (1ULL << RTE_ETH_FLOW_IPV6)
|
|
#define ETH_RSS_FRAG_IPV6 (1ULL << RTE_ETH_FLOW_FRAG_IPV6)
|
|
#define ETH_RSS_NONFRAG_IPV6_TCP (1ULL << RTE_ETH_FLOW_NONFRAG_IPV6_TCP)
|
|
#define ETH_RSS_NONFRAG_IPV6_UDP (1ULL << RTE_ETH_FLOW_NONFRAG_IPV6_UDP)
|
|
#define ETH_RSS_NONFRAG_IPV6_SCTP (1ULL << RTE_ETH_FLOW_NONFRAG_IPV6_SCTP)
|
|
#define ETH_RSS_NONFRAG_IPV6_OTHER (1ULL << RTE_ETH_FLOW_NONFRAG_IPV6_OTHER)
|
|
#define ETH_RSS_L2_PAYLOAD (1ULL << RTE_ETH_FLOW_L2_PAYLOAD)
|
|
#define ETH_RSS_IPV6_EX (1ULL << RTE_ETH_FLOW_IPV6_EX)
|
|
#define ETH_RSS_IPV6_TCP_EX (1ULL << RTE_ETH_FLOW_IPV6_TCP_EX)
|
|
#define ETH_RSS_IPV6_UDP_EX (1ULL << RTE_ETH_FLOW_IPV6_UDP_EX)
|
|
|
|
#define ETH_RSS_IP ( \
|
|
ETH_RSS_IPV4 | \
|
|
ETH_RSS_FRAG_IPV4 | \
|
|
ETH_RSS_NONFRAG_IPV4_OTHER | \
|
|
ETH_RSS_IPV6 | \
|
|
ETH_RSS_FRAG_IPV6 | \
|
|
ETH_RSS_NONFRAG_IPV6_OTHER | \
|
|
ETH_RSS_IPV6_EX)
|
|
|
|
#define ETH_RSS_UDP ( \
|
|
ETH_RSS_NONFRAG_IPV4_UDP | \
|
|
ETH_RSS_NONFRAG_IPV6_UDP | \
|
|
ETH_RSS_IPV6_UDP_EX)
|
|
|
|
#define ETH_RSS_TCP ( \
|
|
ETH_RSS_NONFRAG_IPV4_TCP | \
|
|
ETH_RSS_NONFRAG_IPV6_TCP | \
|
|
ETH_RSS_IPV6_TCP_EX)
|
|
|
|
#define ETH_RSS_SCTP ( \
|
|
ETH_RSS_NONFRAG_IPV4_SCTP | \
|
|
ETH_RSS_NONFRAG_IPV6_SCTP)
|
|
|
|
/**< Mask of valid RSS hash protocols */
|
|
#define ETH_RSS_PROTO_MASK ( \
|
|
ETH_RSS_IPV4 | \
|
|
ETH_RSS_FRAG_IPV4 | \
|
|
ETH_RSS_NONFRAG_IPV4_TCP | \
|
|
ETH_RSS_NONFRAG_IPV4_UDP | \
|
|
ETH_RSS_NONFRAG_IPV4_SCTP | \
|
|
ETH_RSS_NONFRAG_IPV4_OTHER | \
|
|
ETH_RSS_IPV6 | \
|
|
ETH_RSS_FRAG_IPV6 | \
|
|
ETH_RSS_NONFRAG_IPV6_TCP | \
|
|
ETH_RSS_NONFRAG_IPV6_UDP | \
|
|
ETH_RSS_NONFRAG_IPV6_SCTP | \
|
|
ETH_RSS_NONFRAG_IPV6_OTHER | \
|
|
ETH_RSS_L2_PAYLOAD | \
|
|
ETH_RSS_IPV6_EX | \
|
|
ETH_RSS_IPV6_TCP_EX | \
|
|
ETH_RSS_IPV6_UDP_EX)
|
|
|
|
/*
|
|
* Definitions used for redirection table entry size.
|
|
* Some RSS RETA sizes may not be supported by some drivers, check the
|
|
* documentation or the description of relevant functions for more details.
|
|
*/
|
|
#define ETH_RSS_RETA_SIZE_64 64
|
|
#define ETH_RSS_RETA_SIZE_128 128
|
|
#define ETH_RSS_RETA_SIZE_512 512
|
|
#define RTE_RETA_GROUP_SIZE 64
|
|
|
|
/* Definitions used for VMDQ and DCB functionality */
|
|
#define ETH_VMDQ_MAX_VLAN_FILTERS 64 /**< Maximum nb. of VMDQ vlan filters. */
|
|
#define ETH_DCB_NUM_USER_PRIORITIES 8 /**< Maximum nb. of DCB priorities. */
|
|
#define ETH_VMDQ_DCB_NUM_QUEUES 128 /**< Maximum nb. of VMDQ DCB queues. */
|
|
#define ETH_DCB_NUM_QUEUES 128 /**< Maximum nb. of DCB queues. */
|
|
|
|
/* DCB capability defines */
|
|
#define ETH_DCB_PG_SUPPORT 0x00000001 /**< Priority Group(ETS) support. */
|
|
#define ETH_DCB_PFC_SUPPORT 0x00000002 /**< Priority Flow Control support. */
|
|
|
|
/* Definitions used for VLAN Offload functionality */
|
|
#define ETH_VLAN_STRIP_OFFLOAD 0x0001 /**< VLAN Strip On/Off */
|
|
#define ETH_VLAN_FILTER_OFFLOAD 0x0002 /**< VLAN Filter On/Off */
|
|
#define ETH_VLAN_EXTEND_OFFLOAD 0x0004 /**< VLAN Extend On/Off */
|
|
|
|
/* Definitions used for mask VLAN setting */
|
|
#define ETH_VLAN_STRIP_MASK 0x0001 /**< VLAN Strip setting mask */
|
|
#define ETH_VLAN_FILTER_MASK 0x0002 /**< VLAN Filter setting mask*/
|
|
#define ETH_VLAN_EXTEND_MASK 0x0004 /**< VLAN Extend setting mask*/
|
|
#define ETH_VLAN_ID_MAX 0x0FFF /**< VLAN ID is in lower 12 bits*/
|
|
|
|
/* Definitions used for receive MAC address */
|
|
#define ETH_NUM_RECEIVE_MAC_ADDR 128 /**< Maximum nb. of receive mac addr. */
|
|
|
|
/* Definitions used for unicast hash */
|
|
#define ETH_VMDQ_NUM_UC_HASH_ARRAY 128 /**< Maximum nb. of UC hash array. */
|
|
|
|
/* Definitions used for VMDQ pool rx mode setting */
|
|
#define ETH_VMDQ_ACCEPT_UNTAG 0x0001 /**< accept untagged packets. */
|
|
#define ETH_VMDQ_ACCEPT_HASH_MC 0x0002 /**< accept packets in multicast table . */
|
|
#define ETH_VMDQ_ACCEPT_HASH_UC 0x0004 /**< accept packets in unicast table. */
|
|
#define ETH_VMDQ_ACCEPT_BROADCAST 0x0008 /**< accept broadcast packets. */
|
|
#define ETH_VMDQ_ACCEPT_MULTICAST 0x0010 /**< multicast promiscuous. */
|
|
|
|
/** Maximum nb. of vlan per mirror rule */
|
|
#define ETH_MIRROR_MAX_VLANS 64
|
|
|
|
#define ETH_MIRROR_VIRTUAL_POOL_UP 0x01 /**< Virtual Pool uplink Mirroring. */
|
|
#define ETH_MIRROR_UPLINK_PORT 0x02 /**< Uplink Port Mirroring. */
|
|
#define ETH_MIRROR_DOWNLINK_PORT 0x04 /**< Downlink Port Mirroring. */
|
|
#define ETH_MIRROR_VLAN 0x08 /**< VLAN Mirroring. */
|
|
#define ETH_MIRROR_VIRTUAL_POOL_DOWN 0x10 /**< Virtual Pool downlink Mirroring. */
|
|
|
|
/**
|
|
* A structure used to configure VLAN traffic mirror of an Ethernet port.
|
|
*/
|
|
struct rte_eth_vlan_mirror {
|
|
uint64_t vlan_mask; /**< mask for valid VLAN ID. */
|
|
/** VLAN ID list for vlan mirroring. */
|
|
uint16_t vlan_id[ETH_MIRROR_MAX_VLANS];
|
|
};
|
|
|
|
/**
|
|
* A structure used to configure traffic mirror of an Ethernet port.
|
|
*/
|
|
struct rte_eth_mirror_conf {
|
|
uint8_t rule_type; /**< Mirroring rule type */
|
|
uint8_t dst_pool; /**< Destination pool for this mirror rule. */
|
|
uint64_t pool_mask; /**< Bitmap of pool for pool mirroring */
|
|
/** VLAN ID setting for VLAN mirroring. */
|
|
struct rte_eth_vlan_mirror vlan;
|
|
};
|
|
|
|
/**
|
|
* A structure used to configure 64 entries of Redirection Table of the
|
|
* Receive Side Scaling (RSS) feature of an Ethernet port. To configure
|
|
* more than 64 entries supported by hardware, an array of this structure
|
|
* is needed.
|
|
*/
|
|
struct rte_eth_rss_reta_entry64 {
|
|
uint64_t mask;
|
|
/**< Mask bits indicate which entries need to be updated/queried. */
|
|
uint16_t reta[RTE_RETA_GROUP_SIZE];
|
|
/**< Group of 64 redirection table entries. */
|
|
};
|
|
|
|
/**
|
|
* This enum indicates the possible number of traffic classes
|
|
* in DCB configratioins
|
|
*/
|
|
enum rte_eth_nb_tcs {
|
|
ETH_4_TCS = 4, /**< 4 TCs with DCB. */
|
|
ETH_8_TCS = 8 /**< 8 TCs with DCB. */
|
|
};
|
|
|
|
/**
|
|
* This enum indicates the possible number of queue pools
|
|
* in VMDQ configurations.
|
|
*/
|
|
enum rte_eth_nb_pools {
|
|
ETH_8_POOLS = 8, /**< 8 VMDq pools. */
|
|
ETH_16_POOLS = 16, /**< 16 VMDq pools. */
|
|
ETH_32_POOLS = 32, /**< 32 VMDq pools. */
|
|
ETH_64_POOLS = 64 /**< 64 VMDq pools. */
|
|
};
|
|
|
|
/* This structure may be extended in future. */
|
|
struct rte_eth_dcb_rx_conf {
|
|
enum rte_eth_nb_tcs nb_tcs; /**< Possible DCB TCs, 4 or 8 TCs */
|
|
/** Traffic class each UP mapped to. */
|
|
uint8_t dcb_tc[ETH_DCB_NUM_USER_PRIORITIES];
|
|
};
|
|
|
|
struct rte_eth_vmdq_dcb_tx_conf {
|
|
enum rte_eth_nb_pools nb_queue_pools; /**< With DCB, 16 or 32 pools. */
|
|
/** Traffic class each UP mapped to. */
|
|
uint8_t dcb_tc[ETH_DCB_NUM_USER_PRIORITIES];
|
|
};
|
|
|
|
struct rte_eth_dcb_tx_conf {
|
|
enum rte_eth_nb_tcs nb_tcs; /**< Possible DCB TCs, 4 or 8 TCs. */
|
|
/** Traffic class each UP mapped to. */
|
|
uint8_t dcb_tc[ETH_DCB_NUM_USER_PRIORITIES];
|
|
};
|
|
|
|
struct rte_eth_vmdq_tx_conf {
|
|
enum rte_eth_nb_pools nb_queue_pools; /**< VMDq mode, 64 pools. */
|
|
};
|
|
|
|
/**
|
|
* A structure used to configure the VMDQ+DCB feature
|
|
* of an Ethernet port.
|
|
*
|
|
* Using this feature, packets are routed to a pool of queues, based
|
|
* on the vlan id in the vlan tag, and then to a specific queue within
|
|
* that pool, using the user priority vlan tag field.
|
|
*
|
|
* A default pool may be used, if desired, to route all traffic which
|
|
* does not match the vlan filter rules.
|
|
*/
|
|
struct rte_eth_vmdq_dcb_conf {
|
|
enum rte_eth_nb_pools nb_queue_pools; /**< With DCB, 16 or 32 pools */
|
|
uint8_t enable_default_pool; /**< If non-zero, use a default pool */
|
|
uint8_t default_pool; /**< The default pool, if applicable */
|
|
uint8_t nb_pool_maps; /**< We can have up to 64 filters/mappings */
|
|
struct {
|
|
uint16_t vlan_id; /**< The vlan id of the received frame */
|
|
uint64_t pools; /**< Bitmask of pools for packet rx */
|
|
} pool_map[ETH_VMDQ_MAX_VLAN_FILTERS]; /**< VMDq vlan pool maps. */
|
|
uint8_t dcb_tc[ETH_DCB_NUM_USER_PRIORITIES];
|
|
/**< Selects a queue in a pool */
|
|
};
|
|
|
|
struct rte_eth_vmdq_rx_conf {
|
|
enum rte_eth_nb_pools nb_queue_pools; /**< VMDq only mode, 8 or 64 pools */
|
|
uint8_t enable_default_pool; /**< If non-zero, use a default pool */
|
|
uint8_t default_pool; /**< The default pool, if applicable */
|
|
uint8_t enable_loop_back; /**< Enable VT loop back */
|
|
uint8_t nb_pool_maps; /**< We can have up to 64 filters/mappings */
|
|
uint32_t rx_mode; /**< Flags from ETH_VMDQ_ACCEPT_* */
|
|
struct {
|
|
uint16_t vlan_id; /**< The vlan id of the received frame */
|
|
uint64_t pools; /**< Bitmask of pools for packet rx */
|
|
} pool_map[ETH_VMDQ_MAX_VLAN_FILTERS]; /**< VMDq vlan pool maps. */
|
|
};
|
|
|
|
/**
|
|
* A structure used to configure the TX features of an Ethernet port.
|
|
*/
|
|
struct rte_eth_txmode {
|
|
enum rte_eth_tx_mq_mode mq_mode; /**< TX multi-queues mode. */
|
|
|
|
/* For i40e specifically */
|
|
uint16_t pvid;
|
|
uint8_t hw_vlan_reject_tagged : 1,
|
|
/**< If set, reject sending out tagged pkts */
|
|
hw_vlan_reject_untagged : 1,
|
|
/**< If set, reject sending out untagged pkts */
|
|
hw_vlan_insert_pvid : 1;
|
|
/**< If set, enable port based VLAN insertion */
|
|
};
|
|
|
|
/**
|
|
* A structure used to configure an RX ring of an Ethernet port.
|
|
*/
|
|
struct rte_eth_rxconf {
|
|
struct rte_eth_thresh rx_thresh; /**< RX ring threshold registers. */
|
|
uint16_t rx_free_thresh; /**< Drives the freeing of RX descriptors. */
|
|
uint8_t rx_drop_en; /**< Drop packets if no descriptors are available. */
|
|
uint8_t rx_deferred_start; /**< Do not start queue with rte_eth_dev_start(). */
|
|
};
|
|
|
|
#define ETH_TXQ_FLAGS_NOMULTSEGS 0x0001 /**< nb_segs=1 for all mbufs */
|
|
#define ETH_TXQ_FLAGS_NOREFCOUNT 0x0002 /**< refcnt can be ignored */
|
|
#define ETH_TXQ_FLAGS_NOMULTMEMP 0x0004 /**< all bufs come from same mempool */
|
|
#define ETH_TXQ_FLAGS_NOVLANOFFL 0x0100 /**< disable VLAN offload */
|
|
#define ETH_TXQ_FLAGS_NOXSUMSCTP 0x0200 /**< disable SCTP checksum offload */
|
|
#define ETH_TXQ_FLAGS_NOXSUMUDP 0x0400 /**< disable UDP checksum offload */
|
|
#define ETH_TXQ_FLAGS_NOXSUMTCP 0x0800 /**< disable TCP checksum offload */
|
|
#define ETH_TXQ_FLAGS_NOOFFLOADS \
|
|
(ETH_TXQ_FLAGS_NOVLANOFFL | ETH_TXQ_FLAGS_NOXSUMSCTP | \
|
|
ETH_TXQ_FLAGS_NOXSUMUDP | ETH_TXQ_FLAGS_NOXSUMTCP)
|
|
#define ETH_TXQ_FLAGS_NOXSUMS \
|
|
(ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP | \
|
|
ETH_TXQ_FLAGS_NOXSUMTCP)
|
|
/**
|
|
* A structure used to configure a TX ring of an Ethernet port.
|
|
*/
|
|
struct rte_eth_txconf {
|
|
struct rte_eth_thresh tx_thresh; /**< TX ring threshold registers. */
|
|
uint16_t tx_rs_thresh; /**< Drives the setting of RS bit on TXDs. */
|
|
uint16_t tx_free_thresh; /**< Start freeing TX buffers if there are
|
|
less free descriptors than this value. */
|
|
|
|
uint32_t txq_flags; /**< Set flags for the Tx queue */
|
|
uint8_t tx_deferred_start; /**< Do not start queue with rte_eth_dev_start(). */
|
|
};
|
|
|
|
/**
|
|
* A structure contains information about HW descriptor ring limitations.
|
|
*/
|
|
struct rte_eth_desc_lim {
|
|
uint16_t nb_max; /**< Max allowed number of descriptors. */
|
|
uint16_t nb_min; /**< Min allowed number of descriptors. */
|
|
uint16_t nb_align; /**< Number of descriptors should be aligned to. */
|
|
};
|
|
|
|
/**
|
|
* This enum indicates the flow control mode
|
|
*/
|
|
enum rte_eth_fc_mode {
|
|
RTE_FC_NONE = 0, /**< Disable flow control. */
|
|
RTE_FC_RX_PAUSE, /**< RX pause frame, enable flowctrl on TX side. */
|
|
RTE_FC_TX_PAUSE, /**< TX pause frame, enable flowctrl on RX side. */
|
|
RTE_FC_FULL /**< Enable flow control on both side. */
|
|
};
|
|
|
|
/**
|
|
* A structure used to configure Ethernet flow control parameter.
|
|
* These parameters will be configured into the register of the NIC.
|
|
* Please refer to the corresponding data sheet for proper value.
|
|
*/
|
|
struct rte_eth_fc_conf {
|
|
uint32_t high_water; /**< High threshold value to trigger XOFF */
|
|
uint32_t low_water; /**< Low threshold value to trigger XON */
|
|
uint16_t pause_time; /**< Pause quota in the Pause frame */
|
|
uint16_t send_xon; /**< Is XON frame need be sent */
|
|
enum rte_eth_fc_mode mode; /**< Link flow control mode */
|
|
uint8_t mac_ctrl_frame_fwd; /**< Forward MAC control frames */
|
|
uint8_t autoneg; /**< Use Pause autoneg */
|
|
};
|
|
|
|
/**
|
|
* A structure used to configure Ethernet priority flow control parameter.
|
|
* These parameters will be configured into the register of the NIC.
|
|
* Please refer to the corresponding data sheet for proper value.
|
|
*/
|
|
struct rte_eth_pfc_conf {
|
|
struct rte_eth_fc_conf fc; /**< General flow control parameter. */
|
|
uint8_t priority; /**< VLAN User Priority. */
|
|
};
|
|
|
|
/**
|
|
* Memory space that can be configured to store Flow Director filters
|
|
* in the board memory.
|
|
*/
|
|
enum rte_fdir_pballoc_type {
|
|
RTE_FDIR_PBALLOC_64K = 0, /**< 64k. */
|
|
RTE_FDIR_PBALLOC_128K, /**< 128k. */
|
|
RTE_FDIR_PBALLOC_256K, /**< 256k. */
|
|
};
|
|
|
|
/**
|
|
* Select report mode of FDIR hash information in RX descriptors.
|
|
*/
|
|
enum rte_fdir_status_mode {
|
|
RTE_FDIR_NO_REPORT_STATUS = 0, /**< Never report FDIR hash. */
|
|
RTE_FDIR_REPORT_STATUS, /**< Only report FDIR hash for matching pkts. */
|
|
RTE_FDIR_REPORT_STATUS_ALWAYS, /**< Always report FDIR hash. */
|
|
};
|
|
|
|
/**
|
|
* A structure used to configure the Flow Director (FDIR) feature
|
|
* of an Ethernet port.
|
|
*
|
|
* If mode is RTE_FDIR_DISABLE, the pballoc value is ignored.
|
|
*/
|
|
struct rte_fdir_conf {
|
|
enum rte_fdir_mode mode; /**< Flow Director mode. */
|
|
enum rte_fdir_pballoc_type pballoc; /**< Space for FDIR filters. */
|
|
enum rte_fdir_status_mode status; /**< How to report FDIR hash. */
|
|
/** RX queue of packets matching a "drop" filter in perfect mode. */
|
|
uint8_t drop_queue;
|
|
struct rte_eth_fdir_masks mask;
|
|
struct rte_eth_fdir_flex_conf flex_conf;
|
|
/**< Flex payload configuration. */
|
|
};
|
|
|
|
/**
|
|
* UDP tunneling configuration.
|
|
*/
|
|
struct rte_eth_udp_tunnel {
|
|
uint16_t udp_port;
|
|
uint8_t prot_type;
|
|
};
|
|
|
|
/**
|
|
* A structure used to enable/disable specific device interrupts.
|
|
*/
|
|
struct rte_intr_conf {
|
|
/** enable/disable lsc interrupt. 0 (default) - disable, 1 enable */
|
|
uint16_t lsc;
|
|
/** enable/disable rxq interrupt. 0 (default) - disable, 1 enable */
|
|
uint16_t rxq;
|
|
};
|
|
|
|
/**
|
|
* A structure used to configure an Ethernet port.
|
|
* Depending upon the RX multi-queue mode, extra advanced
|
|
* configuration settings may be needed.
|
|
*/
|
|
struct rte_eth_conf {
|
|
uint16_t link_speed;
|
|
/**< ETH_LINK_SPEED_10[0|00|000], or 0 for autonegotation */
|
|
uint16_t link_duplex;
|
|
/**< ETH_LINK_[HALF_DUPLEX|FULL_DUPLEX], or 0 for autonegotation */
|
|
struct rte_eth_rxmode rxmode; /**< Port RX configuration. */
|
|
struct rte_eth_txmode txmode; /**< Port TX configuration. */
|
|
uint32_t lpbk_mode; /**< Loopback operation mode. By default the value
|
|
is 0, meaning the loopback mode is disabled.
|
|
Read the datasheet of given ethernet controller
|
|
for details. The possible values of this field
|
|
are defined in implementation of each driver. */
|
|
struct {
|
|
struct rte_eth_rss_conf rss_conf; /**< Port RSS configuration */
|
|
struct rte_eth_vmdq_dcb_conf vmdq_dcb_conf;
|
|
/**< Port vmdq+dcb configuration. */
|
|
struct rte_eth_dcb_rx_conf dcb_rx_conf;
|
|
/**< Port dcb RX configuration. */
|
|
struct rte_eth_vmdq_rx_conf vmdq_rx_conf;
|
|
/**< Port vmdq RX configuration. */
|
|
} rx_adv_conf; /**< Port RX filtering configuration (union). */
|
|
union {
|
|
struct rte_eth_vmdq_dcb_tx_conf vmdq_dcb_tx_conf;
|
|
/**< Port vmdq+dcb TX configuration. */
|
|
struct rte_eth_dcb_tx_conf dcb_tx_conf;
|
|
/**< Port dcb TX configuration. */
|
|
struct rte_eth_vmdq_tx_conf vmdq_tx_conf;
|
|
/**< Port vmdq TX configuration. */
|
|
} tx_adv_conf; /**< Port TX DCB configuration (union). */
|
|
/** Currently,Priority Flow Control(PFC) are supported,if DCB with PFC
|
|
is needed,and the variable must be set ETH_DCB_PFC_SUPPORT. */
|
|
uint32_t dcb_capability_en;
|
|
struct rte_fdir_conf fdir_conf; /**< FDIR configuration. */
|
|
struct rte_intr_conf intr_conf; /**< Interrupt mode configuration. */
|
|
};
|
|
|
|
/**
|
|
* A structure used to retrieve the contextual information of
|
|
* an Ethernet device, such as the controlling driver of the device,
|
|
* its PCI context, etc...
|
|
*/
|
|
|
|
/**
|
|
* RX offload capabilities of a device.
|
|
*/
|
|
#define DEV_RX_OFFLOAD_VLAN_STRIP 0x00000001
|
|
#define DEV_RX_OFFLOAD_IPV4_CKSUM 0x00000002
|
|
#define DEV_RX_OFFLOAD_UDP_CKSUM 0x00000004
|
|
#define DEV_RX_OFFLOAD_TCP_CKSUM 0x00000008
|
|
#define DEV_RX_OFFLOAD_TCP_LRO 0x00000010
|
|
#define DEV_RX_OFFLOAD_QINQ_STRIP 0x00000020
|
|
|
|
/**
|
|
* TX offload capabilities of a device.
|
|
*/
|
|
#define DEV_TX_OFFLOAD_VLAN_INSERT 0x00000001
|
|
#define DEV_TX_OFFLOAD_IPV4_CKSUM 0x00000002
|
|
#define DEV_TX_OFFLOAD_UDP_CKSUM 0x00000004
|
|
#define DEV_TX_OFFLOAD_TCP_CKSUM 0x00000008
|
|
#define DEV_TX_OFFLOAD_SCTP_CKSUM 0x00000010
|
|
#define DEV_TX_OFFLOAD_TCP_TSO 0x00000020
|
|
#define DEV_TX_OFFLOAD_UDP_TSO 0x00000040
|
|
#define DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM 0x00000080 /**< Used for tunneling packet. */
|
|
#define DEV_TX_OFFLOAD_QINQ_INSERT 0x00000100
|
|
|
|
struct rte_eth_dev_info {
|
|
struct rte_pci_device *pci_dev; /**< Device PCI information. */
|
|
const char *driver_name; /**< Device Driver name. */
|
|
unsigned int if_index; /**< Index to bound host interface, or 0 if none.
|
|
Use if_indextoname() to translate into an interface name. */
|
|
uint32_t min_rx_bufsize; /**< Minimum size of RX buffer. */
|
|
uint32_t max_rx_pktlen; /**< Maximum configurable length of RX pkt. */
|
|
uint16_t max_rx_queues; /**< Maximum number of RX queues. */
|
|
uint16_t max_tx_queues; /**< Maximum number of TX queues. */
|
|
uint32_t max_mac_addrs; /**< Maximum number of MAC addresses. */
|
|
uint32_t max_hash_mac_addrs;
|
|
/** Maximum number of hash MAC addresses for MTA and UTA. */
|
|
uint16_t max_vfs; /**< Maximum number of VFs. */
|
|
uint16_t max_vmdq_pools; /**< Maximum number of VMDq pools. */
|
|
uint32_t rx_offload_capa; /**< Device RX offload capabilities. */
|
|
uint32_t tx_offload_capa; /**< Device TX offload capabilities. */
|
|
uint16_t reta_size;
|
|
/**< Device redirection table size, the total number of entries. */
|
|
uint8_t hash_key_size; /**< Hash key size in bytes */
|
|
/** Bit mask of RSS offloads, the bit offset also means flow type */
|
|
uint64_t flow_type_rss_offloads;
|
|
struct rte_eth_rxconf default_rxconf; /**< Default RX configuration */
|
|
struct rte_eth_txconf default_txconf; /**< Default TX configuration */
|
|
uint16_t vmdq_queue_base; /**< First queue ID for VMDQ pools. */
|
|
uint16_t vmdq_queue_num; /**< Queue number for VMDQ pools. */
|
|
uint16_t vmdq_pool_base; /**< First ID of VMDQ pools. */
|
|
struct rte_eth_desc_lim rx_desc_lim; /**< RX descriptors limits */
|
|
struct rte_eth_desc_lim tx_desc_lim; /**< TX descriptors limits */
|
|
};
|
|
|
|
/**
|
|
* Ethernet device RX queue information structure.
|
|
* Used to retieve information about configured queue.
|
|
*/
|
|
struct rte_eth_rxq_info {
|
|
struct rte_mempool *mp; /**< mempool used by that queue. */
|
|
struct rte_eth_rxconf conf; /**< queue config parameters. */
|
|
uint8_t scattered_rx; /**< scattered packets RX supported. */
|
|
uint16_t nb_desc; /**< configured number of RXDs. */
|
|
} __rte_cache_min_aligned;
|
|
|
|
/**
|
|
* Ethernet device TX queue information structure.
|
|
* Used to retieve information about configured queue.
|
|
*/
|
|
struct rte_eth_txq_info {
|
|
struct rte_eth_txconf conf; /**< queue config parameters. */
|
|
uint16_t nb_desc; /**< configured number of TXDs. */
|
|
} __rte_cache_min_aligned;
|
|
|
|
/** Maximum name length for extended statistics counters */
|
|
#define RTE_ETH_XSTATS_NAME_SIZE 64
|
|
|
|
/**
|
|
* An Ethernet device extended statistic structure
|
|
*
|
|
* This structure is used by ethdev->eth_xstats_get() to provide
|
|
* statistics that are not provided in the generic rte_eth_stats
|
|
* structure.
|
|
*/
|
|
struct rte_eth_xstats {
|
|
char name[RTE_ETH_XSTATS_NAME_SIZE];
|
|
uint64_t value;
|
|
};
|
|
|
|
#define ETH_DCB_NUM_TCS 8
|
|
#define ETH_MAX_VMDQ_POOL 64
|
|
|
|
/**
|
|
* A structure used to get the information of queue and
|
|
* TC mapping on both TX and RX paths.
|
|
*/
|
|
struct rte_eth_dcb_tc_queue_mapping {
|
|
/** rx queues assigned to tc per Pool */
|
|
struct {
|
|
uint8_t base;
|
|
uint8_t nb_queue;
|
|
} tc_rxq[ETH_MAX_VMDQ_POOL][ETH_DCB_NUM_TCS];
|
|
/** rx queues assigned to tc per Pool */
|
|
struct {
|
|
uint8_t base;
|
|
uint8_t nb_queue;
|
|
} tc_txq[ETH_MAX_VMDQ_POOL][ETH_DCB_NUM_TCS];
|
|
};
|
|
|
|
/**
|
|
* A structure used to get the information of DCB.
|
|
* It includes TC UP mapping and queue TC mapping.
|
|
*/
|
|
struct rte_eth_dcb_info {
|
|
uint8_t nb_tcs; /**< number of TCs */
|
|
uint8_t prio_tc[ETH_DCB_NUM_USER_PRIORITIES]; /**< Priority to tc */
|
|
uint8_t tc_bws[ETH_DCB_NUM_TCS]; /**< TX BW percentage for each TC */
|
|
/** rx queues assigned to tc */
|
|
struct rte_eth_dcb_tc_queue_mapping tc_queue;
|
|
};
|
|
|
|
/**
|
|
* RX/TX queue states
|
|
*/
|
|
#define RTE_ETH_QUEUE_STATE_STOPPED 0
|
|
#define RTE_ETH_QUEUE_STATE_STARTED 1
|
|
|
|
struct rte_eth_dev;
|
|
|
|
struct rte_eth_dev_callback;
|
|
/** @internal Structure to keep track of registered callbacks */
|
|
TAILQ_HEAD(rte_eth_dev_cb_list, rte_eth_dev_callback);
|
|
|
|
|
|
#ifdef RTE_LIBRTE_ETHDEV_DEBUG
|
|
#define RTE_PMD_DEBUG_TRACE(...) \
|
|
rte_pmd_debug_trace(__func__, __VA_ARGS__)
|
|
#else
|
|
#define RTE_PMD_DEBUG_TRACE(...)
|
|
#endif
|
|
|
|
|
|
/* Macros to check for valid port */
|
|
#define RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, retval) do { \
|
|
if (!rte_eth_dev_is_valid_port(port_id)) { \
|
|
RTE_PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id); \
|
|
return retval; \
|
|
} \
|
|
} while (0)
|
|
|
|
#define RTE_ETH_VALID_PORTID_OR_RET(port_id) do { \
|
|
if (!rte_eth_dev_is_valid_port(port_id)) { \
|
|
RTE_PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id); \
|
|
return; \
|
|
} \
|
|
} while (0)
|
|
|
|
/*
|
|
* Definitions of all functions exported by an Ethernet driver through the
|
|
* the generic structure of type *eth_dev_ops* supplied in the *rte_eth_dev*
|
|
* structure associated with an Ethernet device.
|
|
*/
|
|
|
|
typedef int (*eth_dev_configure_t)(struct rte_eth_dev *dev);
|
|
/**< @internal Ethernet device configuration. */
|
|
|
|
typedef int (*eth_dev_start_t)(struct rte_eth_dev *dev);
|
|
/**< @internal Function used to start a configured Ethernet device. */
|
|
|
|
typedef void (*eth_dev_stop_t)(struct rte_eth_dev *dev);
|
|
/**< @internal Function used to stop a configured Ethernet device. */
|
|
|
|
typedef int (*eth_dev_set_link_up_t)(struct rte_eth_dev *dev);
|
|
/**< @internal Function used to link up a configured Ethernet device. */
|
|
|
|
typedef int (*eth_dev_set_link_down_t)(struct rte_eth_dev *dev);
|
|
/**< @internal Function used to link down a configured Ethernet device. */
|
|
|
|
typedef void (*eth_dev_close_t)(struct rte_eth_dev *dev);
|
|
/**< @internal Function used to close a configured Ethernet device. */
|
|
|
|
typedef void (*eth_promiscuous_enable_t)(struct rte_eth_dev *dev);
|
|
/**< @internal Function used to enable the RX promiscuous mode of an Ethernet device. */
|
|
|
|
typedef void (*eth_promiscuous_disable_t)(struct rte_eth_dev *dev);
|
|
/**< @internal Function used to disable the RX promiscuous mode of an Ethernet device. */
|
|
|
|
typedef void (*eth_allmulticast_enable_t)(struct rte_eth_dev *dev);
|
|
/**< @internal Enable the receipt of all multicast packets by an Ethernet device. */
|
|
|
|
typedef void (*eth_allmulticast_disable_t)(struct rte_eth_dev *dev);
|
|
/**< @internal Disable the receipt of all multicast packets by an Ethernet device. */
|
|
|
|
typedef int (*eth_link_update_t)(struct rte_eth_dev *dev,
|
|
int wait_to_complete);
|
|
/**< @internal Get link speed, duplex mode and state (up/down) of an Ethernet device. */
|
|
|
|
typedef void (*eth_stats_get_t)(struct rte_eth_dev *dev,
|
|
struct rte_eth_stats *igb_stats);
|
|
/**< @internal Get global I/O statistics of an Ethernet device. */
|
|
|
|
typedef void (*eth_stats_reset_t)(struct rte_eth_dev *dev);
|
|
/**< @internal Reset global I/O statistics of an Ethernet device to 0. */
|
|
|
|
typedef int (*eth_xstats_get_t)(struct rte_eth_dev *dev,
|
|
struct rte_eth_xstats *stats, unsigned n);
|
|
/**< @internal Get extended stats of an Ethernet device. */
|
|
|
|
typedef void (*eth_xstats_reset_t)(struct rte_eth_dev *dev);
|
|
/**< @internal Reset extended stats of an Ethernet device. */
|
|
|
|
typedef int (*eth_queue_stats_mapping_set_t)(struct rte_eth_dev *dev,
|
|
uint16_t queue_id,
|
|
uint8_t stat_idx,
|
|
uint8_t is_rx);
|
|
/**< @internal Set a queue statistics mapping for a tx/rx queue of an Ethernet device. */
|
|
|
|
typedef void (*eth_dev_infos_get_t)(struct rte_eth_dev *dev,
|
|
struct rte_eth_dev_info *dev_info);
|
|
/**< @internal Get specific informations of an Ethernet device. */
|
|
|
|
typedef int (*eth_queue_start_t)(struct rte_eth_dev *dev,
|
|
uint16_t queue_id);
|
|
/**< @internal Start rx and tx of a queue of an Ethernet device. */
|
|
|
|
typedef int (*eth_queue_stop_t)(struct rte_eth_dev *dev,
|
|
uint16_t queue_id);
|
|
/**< @internal Stop rx and tx of a queue of an Ethernet device. */
|
|
|
|
typedef int (*eth_rx_queue_setup_t)(struct rte_eth_dev *dev,
|
|
uint16_t rx_queue_id,
|
|
uint16_t nb_rx_desc,
|
|
unsigned int socket_id,
|
|
const struct rte_eth_rxconf *rx_conf,
|
|
struct rte_mempool *mb_pool);
|
|
/**< @internal Set up a receive queue of an Ethernet device. */
|
|
|
|
typedef int (*eth_tx_queue_setup_t)(struct rte_eth_dev *dev,
|
|
uint16_t tx_queue_id,
|
|
uint16_t nb_tx_desc,
|
|
unsigned int socket_id,
|
|
const struct rte_eth_txconf *tx_conf);
|
|
/**< @internal Setup a transmit queue of an Ethernet device. */
|
|
|
|
typedef int (*eth_rx_enable_intr_t)(struct rte_eth_dev *dev,
|
|
uint16_t rx_queue_id);
|
|
/**< @internal Enable interrupt of a receive queue of an Ethernet device. */
|
|
|
|
typedef int (*eth_rx_disable_intr_t)(struct rte_eth_dev *dev,
|
|
uint16_t rx_queue_id);
|
|
/**< @internal Disable interrupt of a receive queue of an Ethernet device. */
|
|
|
|
typedef void (*eth_queue_release_t)(void *queue);
|
|
/**< @internal Release memory resources allocated by given RX/TX queue. */
|
|
|
|
typedef uint32_t (*eth_rx_queue_count_t)(struct rte_eth_dev *dev,
|
|
uint16_t rx_queue_id);
|
|
/**< @internal Get number of available descriptors on a receive queue of an Ethernet device. */
|
|
|
|
typedef int (*eth_rx_descriptor_done_t)(void *rxq, uint16_t offset);
|
|
/**< @internal Check DD bit of specific RX descriptor */
|
|
|
|
typedef void (*eth_rxq_info_get_t)(struct rte_eth_dev *dev,
|
|
uint16_t rx_queue_id, struct rte_eth_rxq_info *qinfo);
|
|
|
|
typedef void (*eth_txq_info_get_t)(struct rte_eth_dev *dev,
|
|
uint16_t tx_queue_id, struct rte_eth_txq_info *qinfo);
|
|
|
|
typedef int (*mtu_set_t)(struct rte_eth_dev *dev, uint16_t mtu);
|
|
/**< @internal Set MTU. */
|
|
|
|
typedef int (*vlan_filter_set_t)(struct rte_eth_dev *dev,
|
|
uint16_t vlan_id,
|
|
int on);
|
|
/**< @internal filtering of a VLAN Tag Identifier by an Ethernet device. */
|
|
|
|
typedef void (*vlan_tpid_set_t)(struct rte_eth_dev *dev,
|
|
uint16_t tpid);
|
|
/**< @internal set the outer VLAN-TPID by an Ethernet device. */
|
|
|
|
typedef void (*vlan_offload_set_t)(struct rte_eth_dev *dev, int mask);
|
|
/**< @internal set VLAN offload function by an Ethernet device. */
|
|
|
|
typedef int (*vlan_pvid_set_t)(struct rte_eth_dev *dev,
|
|
uint16_t vlan_id,
|
|
int on);
|
|
/**< @internal set port based TX VLAN insertion by an Ethernet device. */
|
|
|
|
typedef void (*vlan_strip_queue_set_t)(struct rte_eth_dev *dev,
|
|
uint16_t rx_queue_id,
|
|
int on);
|
|
/**< @internal VLAN stripping enable/disable by an queue of Ethernet device. */
|
|
|
|
typedef uint16_t (*eth_rx_burst_t)(void *rxq,
|
|
struct rte_mbuf **rx_pkts,
|
|
uint16_t nb_pkts);
|
|
/**< @internal Retrieve input packets from a receive queue of an Ethernet device. */
|
|
|
|
typedef uint16_t (*eth_tx_burst_t)(void *txq,
|
|
struct rte_mbuf **tx_pkts,
|
|
uint16_t nb_pkts);
|
|
/**< @internal Send output packets on a transmit queue of an Ethernet device. */
|
|
|
|
typedef int (*flow_ctrl_get_t)(struct rte_eth_dev *dev,
|
|
struct rte_eth_fc_conf *fc_conf);
|
|
/**< @internal Get current flow control parameter on an Ethernet device */
|
|
|
|
typedef int (*flow_ctrl_set_t)(struct rte_eth_dev *dev,
|
|
struct rte_eth_fc_conf *fc_conf);
|
|
/**< @internal Setup flow control parameter on an Ethernet device */
|
|
|
|
typedef int (*priority_flow_ctrl_set_t)(struct rte_eth_dev *dev,
|
|
struct rte_eth_pfc_conf *pfc_conf);
|
|
/**< @internal Setup priority flow control parameter on an Ethernet device */
|
|
|
|
typedef int (*reta_update_t)(struct rte_eth_dev *dev,
|
|
struct rte_eth_rss_reta_entry64 *reta_conf,
|
|
uint16_t reta_size);
|
|
/**< @internal Update RSS redirection table on an Ethernet device */
|
|
|
|
typedef int (*reta_query_t)(struct rte_eth_dev *dev,
|
|
struct rte_eth_rss_reta_entry64 *reta_conf,
|
|
uint16_t reta_size);
|
|
/**< @internal Query RSS redirection table on an Ethernet device */
|
|
|
|
typedef int (*rss_hash_update_t)(struct rte_eth_dev *dev,
|
|
struct rte_eth_rss_conf *rss_conf);
|
|
/**< @internal Update RSS hash configuration of an Ethernet device */
|
|
|
|
typedef int (*rss_hash_conf_get_t)(struct rte_eth_dev *dev,
|
|
struct rte_eth_rss_conf *rss_conf);
|
|
/**< @internal Get current RSS hash configuration of an Ethernet device */
|
|
|
|
typedef int (*eth_dev_led_on_t)(struct rte_eth_dev *dev);
|
|
/**< @internal Turn on SW controllable LED on an Ethernet device */
|
|
|
|
typedef int (*eth_dev_led_off_t)(struct rte_eth_dev *dev);
|
|
/**< @internal Turn off SW controllable LED on an Ethernet device */
|
|
|
|
typedef void (*eth_mac_addr_remove_t)(struct rte_eth_dev *dev, uint32_t index);
|
|
/**< @internal Remove MAC address from receive address register */
|
|
|
|
typedef void (*eth_mac_addr_add_t)(struct rte_eth_dev *dev,
|
|
struct ether_addr *mac_addr,
|
|
uint32_t index,
|
|
uint32_t vmdq);
|
|
/**< @internal Set a MAC address into Receive Address Address Register */
|
|
|
|
typedef void (*eth_mac_addr_set_t)(struct rte_eth_dev *dev,
|
|
struct ether_addr *mac_addr);
|
|
/**< @internal Set a MAC address into Receive Address Address Register */
|
|
|
|
typedef int (*eth_uc_hash_table_set_t)(struct rte_eth_dev *dev,
|
|
struct ether_addr *mac_addr,
|
|
uint8_t on);
|
|
/**< @internal Set a Unicast Hash bitmap */
|
|
|
|
typedef int (*eth_uc_all_hash_table_set_t)(struct rte_eth_dev *dev,
|
|
uint8_t on);
|
|
/**< @internal Set all Unicast Hash bitmap */
|
|
|
|
typedef int (*eth_set_vf_rx_mode_t)(struct rte_eth_dev *dev,
|
|
uint16_t vf,
|
|
uint16_t rx_mode,
|
|
uint8_t on);
|
|
/**< @internal Set a VF receive mode */
|
|
|
|
typedef int (*eth_set_vf_rx_t)(struct rte_eth_dev *dev,
|
|
uint16_t vf,
|
|
uint8_t on);
|
|
/**< @internal Set a VF receive mode */
|
|
|
|
typedef int (*eth_set_vf_tx_t)(struct rte_eth_dev *dev,
|
|
uint16_t vf,
|
|
uint8_t on);
|
|
/**< @internal Enable or disable a VF transmit */
|
|
|
|
typedef int (*eth_set_vf_vlan_filter_t)(struct rte_eth_dev *dev,
|
|
uint16_t vlan,
|
|
uint64_t vf_mask,
|
|
uint8_t vlan_on);
|
|
/**< @internal Set VF VLAN pool filter */
|
|
|
|
typedef int (*eth_set_queue_rate_limit_t)(struct rte_eth_dev *dev,
|
|
uint16_t queue_idx,
|
|
uint16_t tx_rate);
|
|
/**< @internal Set queue TX rate */
|
|
|
|
typedef int (*eth_set_vf_rate_limit_t)(struct rte_eth_dev *dev,
|
|
uint16_t vf,
|
|
uint16_t tx_rate,
|
|
uint64_t q_msk);
|
|
/**< @internal Set VF TX rate */
|
|
|
|
typedef int (*eth_mirror_rule_set_t)(struct rte_eth_dev *dev,
|
|
struct rte_eth_mirror_conf *mirror_conf,
|
|
uint8_t rule_id,
|
|
uint8_t on);
|
|
/**< @internal Add a traffic mirroring rule on an Ethernet device */
|
|
|
|
typedef int (*eth_mirror_rule_reset_t)(struct rte_eth_dev *dev,
|
|
uint8_t rule_id);
|
|
/**< @internal Remove a traffic mirroring rule on an Ethernet device */
|
|
|
|
typedef int (*eth_udp_tunnel_add_t)(struct rte_eth_dev *dev,
|
|
struct rte_eth_udp_tunnel *tunnel_udp);
|
|
/**< @internal Add tunneling UDP info */
|
|
|
|
typedef int (*eth_udp_tunnel_del_t)(struct rte_eth_dev *dev,
|
|
struct rte_eth_udp_tunnel *tunnel_udp);
|
|
/**< @internal Delete tunneling UDP info */
|
|
|
|
typedef int (*eth_set_mc_addr_list_t)(struct rte_eth_dev *dev,
|
|
struct ether_addr *mc_addr_set,
|
|
uint32_t nb_mc_addr);
|
|
/**< @internal set the list of multicast addresses on an Ethernet device */
|
|
|
|
typedef int (*eth_timesync_enable_t)(struct rte_eth_dev *dev);
|
|
/**< @internal Function used to enable IEEE1588/802.1AS timestamping. */
|
|
|
|
typedef int (*eth_timesync_disable_t)(struct rte_eth_dev *dev);
|
|
/**< @internal Function used to disable IEEE1588/802.1AS timestamping. */
|
|
|
|
typedef int (*eth_timesync_read_rx_timestamp_t)(struct rte_eth_dev *dev,
|
|
struct timespec *timestamp,
|
|
uint32_t flags);
|
|
/**< @internal Function used to read an RX IEEE1588/802.1AS timestamp. */
|
|
|
|
typedef int (*eth_timesync_read_tx_timestamp_t)(struct rte_eth_dev *dev,
|
|
struct timespec *timestamp);
|
|
/**< @internal Function used to read a TX IEEE1588/802.1AS timestamp. */
|
|
|
|
typedef int (*eth_timesync_adjust_time)(struct rte_eth_dev *dev, int64_t);
|
|
/**< @internal Function used to adjust the device clock */
|
|
|
|
typedef int (*eth_timesync_read_time)(struct rte_eth_dev *dev,
|
|
struct timespec *timestamp);
|
|
/**< @internal Function used to get time from the device clock. */
|
|
|
|
typedef int (*eth_timesync_write_time)(struct rte_eth_dev *dev,
|
|
const struct timespec *timestamp);
|
|
/**< @internal Function used to get time from the device clock */
|
|
|
|
typedef int (*eth_get_reg_length_t)(struct rte_eth_dev *dev);
|
|
/**< @internal Retrieve device register count */
|
|
|
|
typedef int (*eth_get_reg_t)(struct rte_eth_dev *dev,
|
|
struct rte_dev_reg_info *info);
|
|
/**< @internal Retrieve registers */
|
|
|
|
typedef int (*eth_get_eeprom_length_t)(struct rte_eth_dev *dev);
|
|
/**< @internal Retrieve eeprom size */
|
|
|
|
typedef int (*eth_get_eeprom_t)(struct rte_eth_dev *dev,
|
|
struct rte_dev_eeprom_info *info);
|
|
/**< @internal Retrieve eeprom data */
|
|
|
|
typedef int (*eth_set_eeprom_t)(struct rte_eth_dev *dev,
|
|
struct rte_dev_eeprom_info *info);
|
|
/**< @internal Program eeprom data */
|
|
|
|
#ifdef RTE_NIC_BYPASS
|
|
|
|
enum {
|
|
RTE_BYPASS_MODE_NONE,
|
|
RTE_BYPASS_MODE_NORMAL,
|
|
RTE_BYPASS_MODE_BYPASS,
|
|
RTE_BYPASS_MODE_ISOLATE,
|
|
RTE_BYPASS_MODE_NUM,
|
|
};
|
|
|
|
#define RTE_BYPASS_MODE_VALID(x) \
|
|
((x) > RTE_BYPASS_MODE_NONE && (x) < RTE_BYPASS_MODE_NUM)
|
|
|
|
enum {
|
|
RTE_BYPASS_EVENT_NONE,
|
|
RTE_BYPASS_EVENT_START,
|
|
RTE_BYPASS_EVENT_OS_ON = RTE_BYPASS_EVENT_START,
|
|
RTE_BYPASS_EVENT_POWER_ON,
|
|
RTE_BYPASS_EVENT_OS_OFF,
|
|
RTE_BYPASS_EVENT_POWER_OFF,
|
|
RTE_BYPASS_EVENT_TIMEOUT,
|
|
RTE_BYPASS_EVENT_NUM
|
|
};
|
|
|
|
#define RTE_BYPASS_EVENT_VALID(x) \
|
|
((x) > RTE_BYPASS_EVENT_NONE && (x) < RTE_BYPASS_MODE_NUM)
|
|
|
|
enum {
|
|
RTE_BYPASS_TMT_OFF, /* timeout disabled. */
|
|
RTE_BYPASS_TMT_1_5_SEC, /* timeout for 1.5 seconds */
|
|
RTE_BYPASS_TMT_2_SEC, /* timeout for 2 seconds */
|
|
RTE_BYPASS_TMT_3_SEC, /* timeout for 3 seconds */
|
|
RTE_BYPASS_TMT_4_SEC, /* timeout for 4 seconds */
|
|
RTE_BYPASS_TMT_8_SEC, /* timeout for 8 seconds */
|
|
RTE_BYPASS_TMT_16_SEC, /* timeout for 16 seconds */
|
|
RTE_BYPASS_TMT_32_SEC, /* timeout for 32 seconds */
|
|
RTE_BYPASS_TMT_NUM
|
|
};
|
|
|
|
#define RTE_BYPASS_TMT_VALID(x) \
|
|
((x) == RTE_BYPASS_TMT_OFF || \
|
|
((x) > RTE_BYPASS_TMT_OFF && (x) < RTE_BYPASS_TMT_NUM))
|
|
|
|
typedef void (*bypass_init_t)(struct rte_eth_dev *dev);
|
|
typedef int32_t (*bypass_state_set_t)(struct rte_eth_dev *dev, uint32_t *new_state);
|
|
typedef int32_t (*bypass_state_show_t)(struct rte_eth_dev *dev, uint32_t *state);
|
|
typedef int32_t (*bypass_event_set_t)(struct rte_eth_dev *dev, uint32_t state, uint32_t event);
|
|
typedef int32_t (*bypass_event_show_t)(struct rte_eth_dev *dev, uint32_t event_shift, uint32_t *event);
|
|
typedef int32_t (*bypass_wd_timeout_set_t)(struct rte_eth_dev *dev, uint32_t timeout);
|
|
typedef int32_t (*bypass_wd_timeout_show_t)(struct rte_eth_dev *dev, uint32_t *wd_timeout);
|
|
typedef int32_t (*bypass_ver_show_t)(struct rte_eth_dev *dev, uint32_t *ver);
|
|
typedef int32_t (*bypass_wd_reset_t)(struct rte_eth_dev *dev);
|
|
#endif
|
|
|
|
typedef int (*eth_filter_ctrl_t)(struct rte_eth_dev *dev,
|
|
enum rte_filter_type filter_type,
|
|
enum rte_filter_op filter_op,
|
|
void *arg);
|
|
/**< @internal Take operations to assigned filter type on an Ethernet device */
|
|
|
|
typedef int (*eth_get_dcb_info)(struct rte_eth_dev *dev,
|
|
struct rte_eth_dcb_info *dcb_info);
|
|
/**< @internal Get dcb information on an Ethernet device */
|
|
|
|
/**
|
|
* @internal A structure containing the functions exported by an Ethernet driver.
|
|
*/
|
|
struct eth_dev_ops {
|
|
eth_dev_configure_t dev_configure; /**< Configure device. */
|
|
eth_dev_start_t dev_start; /**< Start device. */
|
|
eth_dev_stop_t dev_stop; /**< Stop device. */
|
|
eth_dev_set_link_up_t dev_set_link_up; /**< Device link up. */
|
|
eth_dev_set_link_down_t dev_set_link_down; /**< Device link down. */
|
|
eth_dev_close_t dev_close; /**< Close device. */
|
|
eth_promiscuous_enable_t promiscuous_enable; /**< Promiscuous ON. */
|
|
eth_promiscuous_disable_t promiscuous_disable;/**< Promiscuous OFF. */
|
|
eth_allmulticast_enable_t allmulticast_enable;/**< RX multicast ON. */
|
|
eth_allmulticast_disable_t allmulticast_disable;/**< RX multicast OF. */
|
|
eth_link_update_t link_update; /**< Get device link state. */
|
|
eth_stats_get_t stats_get; /**< Get generic device statistics. */
|
|
eth_stats_reset_t stats_reset; /**< Reset generic device statistics. */
|
|
eth_xstats_get_t xstats_get; /**< Get extended device statistics. */
|
|
eth_xstats_reset_t xstats_reset; /**< Reset extended device statistics. */
|
|
eth_queue_stats_mapping_set_t queue_stats_mapping_set;
|
|
/**< Configure per queue stat counter mapping. */
|
|
eth_dev_infos_get_t dev_infos_get; /**< Get device info. */
|
|
mtu_set_t mtu_set; /**< Set MTU. */
|
|
vlan_filter_set_t vlan_filter_set; /**< Filter VLAN Setup. */
|
|
vlan_tpid_set_t vlan_tpid_set; /**< Outer VLAN TPID Setup. */
|
|
vlan_strip_queue_set_t vlan_strip_queue_set; /**< VLAN Stripping on queue. */
|
|
vlan_offload_set_t vlan_offload_set; /**< Set VLAN Offload. */
|
|
vlan_pvid_set_t vlan_pvid_set; /**< Set port based TX VLAN insertion */
|
|
eth_queue_start_t rx_queue_start;/**< Start RX for a queue.*/
|
|
eth_queue_stop_t rx_queue_stop;/**< Stop RX for a queue.*/
|
|
eth_queue_start_t tx_queue_start;/**< Start TX for a queue.*/
|
|
eth_queue_stop_t tx_queue_stop;/**< Stop TX for a queue.*/
|
|
eth_rx_queue_setup_t rx_queue_setup;/**< Set up device RX queue.*/
|
|
eth_queue_release_t rx_queue_release;/**< Release RX queue.*/
|
|
eth_rx_queue_count_t rx_queue_count; /**< Get Rx queue count. */
|
|
eth_rx_descriptor_done_t rx_descriptor_done; /**< Check rxd DD bit */
|
|
/**< Enable Rx queue interrupt. */
|
|
eth_rx_enable_intr_t rx_queue_intr_enable;
|
|
/**< Disable Rx queue interrupt.*/
|
|
eth_rx_disable_intr_t rx_queue_intr_disable;
|
|
eth_tx_queue_setup_t tx_queue_setup;/**< Set up device TX queue.*/
|
|
eth_queue_release_t tx_queue_release;/**< Release TX queue.*/
|
|
eth_dev_led_on_t dev_led_on; /**< Turn on LED. */
|
|
eth_dev_led_off_t dev_led_off; /**< Turn off LED. */
|
|
flow_ctrl_get_t flow_ctrl_get; /**< Get flow control. */
|
|
flow_ctrl_set_t flow_ctrl_set; /**< Setup flow control. */
|
|
priority_flow_ctrl_set_t priority_flow_ctrl_set; /**< Setup priority flow control.*/
|
|
eth_mac_addr_remove_t mac_addr_remove; /**< Remove MAC address */
|
|
eth_mac_addr_add_t mac_addr_add; /**< Add a MAC address */
|
|
eth_mac_addr_set_t mac_addr_set; /**< Set a MAC address */
|
|
eth_uc_hash_table_set_t uc_hash_table_set; /**< Set Unicast Table Array */
|
|
eth_uc_all_hash_table_set_t uc_all_hash_table_set; /**< Set Unicast hash bitmap */
|
|
eth_mirror_rule_set_t mirror_rule_set; /**< Add a traffic mirror rule.*/
|
|
eth_mirror_rule_reset_t mirror_rule_reset; /**< reset a traffic mirror rule.*/
|
|
eth_set_vf_rx_mode_t set_vf_rx_mode; /**< Set VF RX mode */
|
|
eth_set_vf_rx_t set_vf_rx; /**< enable/disable a VF receive */
|
|
eth_set_vf_tx_t set_vf_tx; /**< enable/disable a VF transmit */
|
|
eth_set_vf_vlan_filter_t set_vf_vlan_filter; /**< Set VF VLAN filter */
|
|
eth_udp_tunnel_add_t udp_tunnel_add;
|
|
eth_udp_tunnel_del_t udp_tunnel_del;
|
|
eth_set_queue_rate_limit_t set_queue_rate_limit; /**< Set queue rate limit */
|
|
eth_set_vf_rate_limit_t set_vf_rate_limit; /**< Set VF rate limit */
|
|
/** Update redirection table. */
|
|
reta_update_t reta_update;
|
|
/** Query redirection table. */
|
|
reta_query_t reta_query;
|
|
|
|
eth_get_reg_length_t get_reg_length;
|
|
/**< Get # of registers */
|
|
eth_get_reg_t get_reg;
|
|
/**< Get registers */
|
|
eth_get_eeprom_length_t get_eeprom_length;
|
|
/**< Get eeprom length */
|
|
eth_get_eeprom_t get_eeprom;
|
|
/**< Get eeprom data */
|
|
eth_set_eeprom_t set_eeprom;
|
|
/**< Set eeprom */
|
|
/* bypass control */
|
|
#ifdef RTE_NIC_BYPASS
|
|
bypass_init_t bypass_init;
|
|
bypass_state_set_t bypass_state_set;
|
|
bypass_state_show_t bypass_state_show;
|
|
bypass_event_set_t bypass_event_set;
|
|
bypass_event_show_t bypass_event_show;
|
|
bypass_wd_timeout_set_t bypass_wd_timeout_set;
|
|
bypass_wd_timeout_show_t bypass_wd_timeout_show;
|
|
bypass_ver_show_t bypass_ver_show;
|
|
bypass_wd_reset_t bypass_wd_reset;
|
|
#endif
|
|
|
|
/** Configure RSS hash protocols. */
|
|
rss_hash_update_t rss_hash_update;
|
|
/** Get current RSS hash configuration. */
|
|
rss_hash_conf_get_t rss_hash_conf_get;
|
|
eth_filter_ctrl_t filter_ctrl;
|
|
/**< common filter control. */
|
|
eth_set_mc_addr_list_t set_mc_addr_list; /**< set list of mcast addrs */
|
|
eth_rxq_info_get_t rxq_info_get;
|
|
/**< retrieve RX queue information. */
|
|
eth_txq_info_get_t txq_info_get;
|
|
/**< retrieve TX queue information. */
|
|
/** Turn IEEE1588/802.1AS timestamping on. */
|
|
eth_timesync_enable_t timesync_enable;
|
|
/** Turn IEEE1588/802.1AS timestamping off. */
|
|
eth_timesync_disable_t timesync_disable;
|
|
/** Read the IEEE1588/802.1AS RX timestamp. */
|
|
eth_timesync_read_rx_timestamp_t timesync_read_rx_timestamp;
|
|
/** Read the IEEE1588/802.1AS TX timestamp. */
|
|
eth_timesync_read_tx_timestamp_t timesync_read_tx_timestamp;
|
|
|
|
/** Get DCB information */
|
|
eth_get_dcb_info get_dcb_info;
|
|
/** Adjust the device clock.*/
|
|
eth_timesync_adjust_time timesync_adjust_time;
|
|
/** Get the device clock time. */
|
|
eth_timesync_read_time timesync_read_time;
|
|
/** Set the device clock time. */
|
|
eth_timesync_write_time timesync_write_time;
|
|
};
|
|
|
|
/**
|
|
* Function type used for RX packet processing packet callbacks.
|
|
*
|
|
* The callback function is called on RX with a burst of packets that have
|
|
* been received on the given port and queue.
|
|
*
|
|
* @param port
|
|
* The Ethernet port on which RX is being performed.
|
|
* @param queue
|
|
* The queue on the Ethernet port which is being used to receive the packets.
|
|
* @param pkts
|
|
* The burst of packets that have just been received.
|
|
* @param nb_pkts
|
|
* The number of packets in the burst pointed to by "pkts".
|
|
* @param max_pkts
|
|
* The max number of packets that can be stored in the "pkts" array.
|
|
* @param user_param
|
|
* The arbitrary user parameter passed in by the application when the callback
|
|
* was originally configured.
|
|
* @return
|
|
* The number of packets returned to the user.
|
|
*/
|
|
typedef uint16_t (*rte_rx_callback_fn)(uint8_t port, uint16_t queue,
|
|
struct rte_mbuf *pkts[], uint16_t nb_pkts, uint16_t max_pkts,
|
|
void *user_param);
|
|
|
|
/**
|
|
* Function type used for TX packet processing packet callbacks.
|
|
*
|
|
* The callback function is called on TX with a burst of packets immediately
|
|
* before the packets are put onto the hardware queue for transmission.
|
|
*
|
|
* @param port
|
|
* The Ethernet port on which TX is being performed.
|
|
* @param queue
|
|
* The queue on the Ethernet port which is being used to transmit the packets.
|
|
* @param pkts
|
|
* The burst of packets that are about to be transmitted.
|
|
* @param nb_pkts
|
|
* The number of packets in the burst pointed to by "pkts".
|
|
* @param user_param
|
|
* The arbitrary user parameter passed in by the application when the callback
|
|
* was originally configured.
|
|
* @return
|
|
* The number of packets to be written to the NIC.
|
|
*/
|
|
typedef uint16_t (*rte_tx_callback_fn)(uint8_t port, uint16_t queue,
|
|
struct rte_mbuf *pkts[], uint16_t nb_pkts, void *user_param);
|
|
|
|
/**
|
|
* @internal
|
|
* Structure used to hold information about the callbacks to be called for a
|
|
* queue on RX and TX.
|
|
*/
|
|
struct rte_eth_rxtx_callback {
|
|
struct rte_eth_rxtx_callback *next;
|
|
union{
|
|
rte_rx_callback_fn rx;
|
|
rte_tx_callback_fn tx;
|
|
} fn;
|
|
void *param;
|
|
};
|
|
|
|
/**
|
|
* The eth device type.
|
|
*/
|
|
enum rte_eth_dev_type {
|
|
RTE_ETH_DEV_UNKNOWN, /**< unknown device type */
|
|
RTE_ETH_DEV_PCI,
|
|
/**< Physical function and Virtual function of PCI devices */
|
|
RTE_ETH_DEV_VIRTUAL, /**< non hardware device */
|
|
RTE_ETH_DEV_MAX /**< max value of this enum */
|
|
};
|
|
|
|
/**
|
|
* @internal
|
|
* The generic data structure associated with each ethernet device.
|
|
*
|
|
* Pointers to burst-oriented packet receive and transmit functions are
|
|
* located at the beginning of the structure, along with the pointer to
|
|
* where all the data elements for the particular device are stored in shared
|
|
* memory. This split allows the function pointer and driver data to be per-
|
|
* process, while the actual configuration data for the device is shared.
|
|
*/
|
|
struct rte_eth_dev {
|
|
eth_rx_burst_t rx_pkt_burst; /**< Pointer to PMD receive function. */
|
|
eth_tx_burst_t tx_pkt_burst; /**< Pointer to PMD transmit function. */
|
|
struct rte_eth_dev_data *data; /**< Pointer to device data */
|
|
const struct eth_driver *driver;/**< Driver for this device */
|
|
const struct eth_dev_ops *dev_ops; /**< Functions exported by PMD */
|
|
struct rte_pci_device *pci_dev; /**< PCI info. supplied by probing */
|
|
/** User application callbacks for NIC interrupts */
|
|
struct rte_eth_dev_cb_list link_intr_cbs;
|
|
/**
|
|
* User-supplied functions called from rx_burst to post-process
|
|
* received packets before passing them to the user
|
|
*/
|
|
struct rte_eth_rxtx_callback *post_rx_burst_cbs[RTE_MAX_QUEUES_PER_PORT];
|
|
/**
|
|
* User-supplied functions called from tx_burst to pre-process
|
|
* received packets before passing them to the driver for transmission.
|
|
*/
|
|
struct rte_eth_rxtx_callback *pre_tx_burst_cbs[RTE_MAX_QUEUES_PER_PORT];
|
|
uint8_t attached; /**< Flag indicating the port is attached */
|
|
enum rte_eth_dev_type dev_type; /**< Flag indicating the device type */
|
|
};
|
|
|
|
struct rte_eth_dev_sriov {
|
|
uint8_t active; /**< SRIOV is active with 16, 32 or 64 pools */
|
|
uint8_t nb_q_per_pool; /**< rx queue number per pool */
|
|
uint16_t def_vmdq_idx; /**< Default pool num used for PF */
|
|
uint16_t def_pool_q_idx; /**< Default pool queue start reg index */
|
|
};
|
|
#define RTE_ETH_DEV_SRIOV(dev) ((dev)->data->sriov)
|
|
|
|
#define RTE_ETH_NAME_MAX_LEN (32)
|
|
|
|
/**
|
|
* @internal
|
|
* The data part, with no function pointers, associated with each ethernet device.
|
|
*
|
|
* This structure is safe to place in shared memory to be common among different
|
|
* processes in a multi-process configuration.
|
|
*/
|
|
struct rte_eth_dev_data {
|
|
char name[RTE_ETH_NAME_MAX_LEN]; /**< Unique identifier name */
|
|
|
|
void **rx_queues; /**< Array of pointers to RX queues. */
|
|
void **tx_queues; /**< Array of pointers to TX queues. */
|
|
uint16_t nb_rx_queues; /**< Number of RX queues. */
|
|
uint16_t nb_tx_queues; /**< Number of TX queues. */
|
|
|
|
struct rte_eth_dev_sriov sriov; /**< SRIOV data */
|
|
|
|
void *dev_private; /**< PMD-specific private data */
|
|
|
|
struct rte_eth_link dev_link;
|
|
/**< Link-level information & status */
|
|
|
|
struct rte_eth_conf dev_conf; /**< Configuration applied to device. */
|
|
uint16_t mtu; /**< Maximum Transmission Unit. */
|
|
|
|
uint32_t min_rx_buf_size;
|
|
/**< Common rx buffer size handled by all queues */
|
|
|
|
uint64_t rx_mbuf_alloc_failed; /**< RX ring mbuf allocation failures. */
|
|
struct ether_addr* mac_addrs;/**< Device Ethernet Link address. */
|
|
uint64_t mac_pool_sel[ETH_NUM_RECEIVE_MAC_ADDR];
|
|
/** bitmap array of associating Ethernet MAC addresses to pools */
|
|
struct ether_addr* hash_mac_addrs;
|
|
/** Device Ethernet MAC addresses of hash filtering. */
|
|
uint8_t port_id; /**< Device [external] port identifier. */
|
|
uint8_t promiscuous : 1, /**< RX promiscuous mode ON(1) / OFF(0). */
|
|
scattered_rx : 1, /**< RX of scattered packets is ON(1) / OFF(0) */
|
|
all_multicast : 1, /**< RX all multicast mode ON(1) / OFF(0). */
|
|
dev_started : 1, /**< Device state: STARTED(1) / STOPPED(0). */
|
|
lro : 1; /**< RX LRO is ON(1) / OFF(0) */
|
|
uint8_t rx_queue_state[RTE_MAX_QUEUES_PER_PORT];
|
|
/** Queues state: STARTED(1) / STOPPED(0) */
|
|
uint8_t tx_queue_state[RTE_MAX_QUEUES_PER_PORT];
|
|
/** Queues state: STARTED(1) / STOPPED(0) */
|
|
uint32_t dev_flags; /**< Capabilities */
|
|
enum rte_kernel_driver kdrv; /**< Kernel driver passthrough */
|
|
int numa_node; /**< NUMA node connection */
|
|
const char *drv_name; /**< Driver name */
|
|
};
|
|
|
|
/** Device supports hotplug detach */
|
|
#define RTE_ETH_DEV_DETACHABLE 0x0001
|
|
/** Device supports link state interrupt */
|
|
#define RTE_ETH_DEV_INTR_LSC 0x0002
|
|
|
|
/**
|
|
* @internal
|
|
* The pool of *rte_eth_dev* structures. The size of the pool
|
|
* is configured at compile-time in the <rte_ethdev.c> file.
|
|
*/
|
|
extern struct rte_eth_dev rte_eth_devices[];
|
|
|
|
/**
|
|
* Get the total number of Ethernet devices that have been successfully
|
|
* initialized by the [matching] Ethernet driver during the PCI probing phase.
|
|
* All devices whose port identifier is in the range
|
|
* [0, rte_eth_dev_count() - 1] can be operated on by network applications
|
|
* immediately after invoking rte_eal_init().
|
|
* If the application unplugs a port using hotplug function, The enabled port
|
|
* numbers may be noncontiguous. In the case, the applications need to manage
|
|
* enabled port by themselves.
|
|
*
|
|
* @return
|
|
* - The total number of usable Ethernet devices.
|
|
*/
|
|
uint8_t rte_eth_dev_count(void);
|
|
|
|
/**
|
|
* @internal
|
|
* Returns a ethdev slot specified by the unique identifier name.
|
|
*
|
|
* @param name
|
|
* The pointer to the Unique identifier name for each Ethernet device
|
|
* @return
|
|
* - The pointer to the ethdev slot, on success. NULL on error
|
|
*/
|
|
struct rte_eth_dev *rte_eth_dev_allocated(const char *name);
|
|
|
|
/**
|
|
* @internal
|
|
* Allocates a new ethdev slot for an ethernet device and returns the pointer
|
|
* to that slot for the driver to use.
|
|
*
|
|
* @param name Unique identifier name for each Ethernet device
|
|
* @param type Device type of this Ethernet device
|
|
* @return
|
|
* - Slot in the rte_dev_devices array for a new device;
|
|
*/
|
|
struct rte_eth_dev *rte_eth_dev_allocate(const char *name,
|
|
enum rte_eth_dev_type type);
|
|
|
|
/**
|
|
* @internal
|
|
* Release the specified ethdev port.
|
|
*
|
|
* @param eth_dev
|
|
* The *eth_dev* pointer is the address of the *rte_eth_dev* structure.
|
|
* @return
|
|
* - 0 on success, negative on error
|
|
*/
|
|
int rte_eth_dev_release_port(struct rte_eth_dev *eth_dev);
|
|
|
|
/**
|
|
* Attach a new Ethernet device specified by aruguments.
|
|
*
|
|
* @param devargs
|
|
* A pointer to a strings array describing the new device
|
|
* to be attached. The strings should be a pci address like
|
|
* '0000:01:00.0' or virtual device name like 'eth_pcap0'.
|
|
* @param port_id
|
|
* A pointer to a port identifier actually attached.
|
|
* @return
|
|
* 0 on success and port_id is filled, negative on error
|
|
*/
|
|
int rte_eth_dev_attach(const char *devargs, uint8_t *port_id);
|
|
|
|
/**
|
|
* Detach a Ethernet device specified by port identifier.
|
|
* This function must be called when the device is in the
|
|
* closed state.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the device to detach.
|
|
* @param devname
|
|
* A pointer to a device name actually detached.
|
|
* @return
|
|
* 0 on success and devname is filled, negative on error
|
|
*/
|
|
int rte_eth_dev_detach(uint8_t port_id, char *devname);
|
|
|
|
struct eth_driver;
|
|
/**
|
|
* @internal
|
|
* Initialization function of an Ethernet driver invoked for each matching
|
|
* Ethernet PCI device detected during the PCI probing phase.
|
|
*
|
|
* @param eth_dev
|
|
* The *eth_dev* pointer is the address of the *rte_eth_dev* structure
|
|
* associated with the matching device and which have been [automatically]
|
|
* allocated in the *rte_eth_devices* array.
|
|
* The *eth_dev* structure is supplied to the driver initialization function
|
|
* with the following fields already initialized:
|
|
*
|
|
* - *pci_dev*: Holds the pointers to the *rte_pci_device* structure which
|
|
* contains the generic PCI information of the matching device.
|
|
*
|
|
* - *driver*: Holds the pointer to the *eth_driver* structure.
|
|
*
|
|
* - *dev_private*: Holds a pointer to the device private data structure.
|
|
*
|
|
* - *mtu*: Contains the default Ethernet maximum frame length (1500).
|
|
*
|
|
* - *port_id*: Contains the port index of the device (actually the index
|
|
* of the *eth_dev* structure in the *rte_eth_devices* array).
|
|
*
|
|
* @return
|
|
* - 0: Success, the device is properly initialized by the driver.
|
|
* In particular, the driver MUST have set up the *dev_ops* pointer
|
|
* of the *eth_dev* structure.
|
|
* - <0: Error code of the device initialization failure.
|
|
*/
|
|
typedef int (*eth_dev_init_t)(struct rte_eth_dev *eth_dev);
|
|
|
|
/**
|
|
* @internal
|
|
* Finalization function of an Ethernet driver invoked for each matching
|
|
* Ethernet PCI device detected during the PCI closing phase.
|
|
*
|
|
* @param eth_dev
|
|
* The *eth_dev* pointer is the address of the *rte_eth_dev* structure
|
|
* associated with the matching device and which have been [automatically]
|
|
* allocated in the *rte_eth_devices* array.
|
|
* @return
|
|
* - 0: Success, the device is properly finalized by the driver.
|
|
* In particular, the driver MUST free the *dev_ops* pointer
|
|
* of the *eth_dev* structure.
|
|
* - <0: Error code of the device initialization failure.
|
|
*/
|
|
typedef int (*eth_dev_uninit_t)(struct rte_eth_dev *eth_dev);
|
|
|
|
/**
|
|
* @internal
|
|
* The structure associated with a PMD Ethernet driver.
|
|
*
|
|
* Each Ethernet driver acts as a PCI driver and is represented by a generic
|
|
* *eth_driver* structure that holds:
|
|
*
|
|
* - An *rte_pci_driver* structure (which must be the first field).
|
|
*
|
|
* - The *eth_dev_init* function invoked for each matching PCI device.
|
|
*
|
|
* - The *eth_dev_uninit* function invoked for each matching PCI device.
|
|
*
|
|
* - The size of the private data to allocate for each matching device.
|
|
*/
|
|
struct eth_driver {
|
|
struct rte_pci_driver pci_drv; /**< The PMD is also a PCI driver. */
|
|
eth_dev_init_t eth_dev_init; /**< Device init function. */
|
|
eth_dev_uninit_t eth_dev_uninit; /**< Device uninit function. */
|
|
unsigned int dev_private_size; /**< Size of device private data. */
|
|
};
|
|
|
|
/**
|
|
* @internal
|
|
* A function invoked by the initialization function of an Ethernet driver
|
|
* to simultaneously register itself as a PCI driver and as an Ethernet
|
|
* Poll Mode Driver (PMD).
|
|
*
|
|
* @param eth_drv
|
|
* The pointer to the *eth_driver* structure associated with
|
|
* the Ethernet driver.
|
|
*/
|
|
void rte_eth_driver_register(struct eth_driver *eth_drv);
|
|
|
|
/**
|
|
* Configure an Ethernet device.
|
|
* This function must be invoked first before any other function in the
|
|
* Ethernet API. This function can also be re-invoked when a device is in the
|
|
* stopped state.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device to configure.
|
|
* @param nb_rx_queue
|
|
* The number of receive queues to set up for the Ethernet device.
|
|
* @param nb_tx_queue
|
|
* The number of transmit queues to set up for the Ethernet device.
|
|
* @param eth_conf
|
|
* The pointer to the configuration data to be used for the Ethernet device.
|
|
* The *rte_eth_conf* structure includes:
|
|
* - the hardware offload features to activate, with dedicated fields for
|
|
* each statically configurable offload hardware feature provided by
|
|
* Ethernet devices, such as IP checksum or VLAN tag stripping for
|
|
* example.
|
|
* - the Receive Side Scaling (RSS) configuration when using multiple RX
|
|
* queues per port.
|
|
*
|
|
* Embedding all configuration information in a single data structure
|
|
* is the more flexible method that allows the addition of new features
|
|
* without changing the syntax of the API.
|
|
* @return
|
|
* - 0: Success, device configured.
|
|
* - <0: Error code returned by the driver configuration function.
|
|
*/
|
|
int rte_eth_dev_configure(uint8_t port_id, uint16_t nb_rx_queue,
|
|
uint16_t nb_tx_queue, const struct rte_eth_conf *eth_conf);
|
|
|
|
/**
|
|
* Allocate and set up a receive queue for an Ethernet device.
|
|
*
|
|
* The function allocates a contiguous block of memory for *nb_rx_desc*
|
|
* receive descriptors from a memory zone associated with *socket_id*
|
|
* and initializes each receive descriptor with a network buffer allocated
|
|
* from the memory pool *mb_pool*.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param rx_queue_id
|
|
* The index of the receive queue to set up.
|
|
* The value must be in the range [0, nb_rx_queue - 1] previously supplied
|
|
* to rte_eth_dev_configure().
|
|
* @param nb_rx_desc
|
|
* The number of receive descriptors to allocate for the receive ring.
|
|
* @param socket_id
|
|
* The *socket_id* argument is the socket identifier in case of NUMA.
|
|
* The value can be *SOCKET_ID_ANY* if there is no NUMA constraint for
|
|
* the DMA memory allocated for the receive descriptors of the ring.
|
|
* @param rx_conf
|
|
* The pointer to the configuration data to be used for the receive queue.
|
|
* NULL value is allowed, in which case default RX configuration
|
|
* will be used.
|
|
* The *rx_conf* structure contains an *rx_thresh* structure with the values
|
|
* of the Prefetch, Host, and Write-Back threshold registers of the receive
|
|
* ring.
|
|
* @param mb_pool
|
|
* The pointer to the memory pool from which to allocate *rte_mbuf* network
|
|
* memory buffers to populate each descriptor of the receive ring.
|
|
* @return
|
|
* - 0: Success, receive queue correctly set up.
|
|
* - -EINVAL: The size of network buffers which can be allocated from the
|
|
* memory pool does not fit the various buffer sizes allowed by the
|
|
* device controller.
|
|
* - -ENOMEM: Unable to allocate the receive ring descriptors or to
|
|
* allocate network memory buffers from the memory pool when
|
|
* initializing receive descriptors.
|
|
*/
|
|
int rte_eth_rx_queue_setup(uint8_t port_id, uint16_t rx_queue_id,
|
|
uint16_t nb_rx_desc, unsigned int socket_id,
|
|
const struct rte_eth_rxconf *rx_conf,
|
|
struct rte_mempool *mb_pool);
|
|
|
|
/**
|
|
* Allocate and set up a transmit queue for an Ethernet device.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param tx_queue_id
|
|
* The index of the transmit queue to set up.
|
|
* The value must be in the range [0, nb_tx_queue - 1] previously supplied
|
|
* to rte_eth_dev_configure().
|
|
* @param nb_tx_desc
|
|
* The number of transmit descriptors to allocate for the transmit ring.
|
|
* @param socket_id
|
|
* The *socket_id* argument is the socket identifier in case of NUMA.
|
|
* Its value can be *SOCKET_ID_ANY* if there is no NUMA constraint for
|
|
* the DMA memory allocated for the transmit descriptors of the ring.
|
|
* @param tx_conf
|
|
* The pointer to the configuration data to be used for the transmit queue.
|
|
* NULL value is allowed, in which case default RX configuration
|
|
* will be used.
|
|
* The *tx_conf* structure contains the following data:
|
|
* - The *tx_thresh* structure with the values of the Prefetch, Host, and
|
|
* Write-Back threshold registers of the transmit ring.
|
|
* When setting Write-Back threshold to the value greater then zero,
|
|
* *tx_rs_thresh* value should be explicitly set to one.
|
|
* - The *tx_free_thresh* value indicates the [minimum] number of network
|
|
* buffers that must be pending in the transmit ring to trigger their
|
|
* [implicit] freeing by the driver transmit function.
|
|
* - The *tx_rs_thresh* value indicates the [minimum] number of transmit
|
|
* descriptors that must be pending in the transmit ring before setting the
|
|
* RS bit on a descriptor by the driver transmit function.
|
|
* The *tx_rs_thresh* value should be less or equal then
|
|
* *tx_free_thresh* value, and both of them should be less then
|
|
* *nb_tx_desc* - 3.
|
|
* - The *txq_flags* member contains flags to pass to the TX queue setup
|
|
* function to configure the behavior of the TX queue. This should be set
|
|
* to 0 if no special configuration is required.
|
|
*
|
|
* Note that setting *tx_free_thresh* or *tx_rs_thresh* value to 0 forces
|
|
* the transmit function to use default values.
|
|
* @return
|
|
* - 0: Success, the transmit queue is correctly set up.
|
|
* - -ENOMEM: Unable to allocate the transmit ring descriptors.
|
|
*/
|
|
int rte_eth_tx_queue_setup(uint8_t port_id, uint16_t tx_queue_id,
|
|
uint16_t nb_tx_desc, unsigned int socket_id,
|
|
const struct rte_eth_txconf *tx_conf);
|
|
|
|
/*
|
|
* Return the NUMA socket to which an Ethernet device is connected
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device
|
|
* @return
|
|
* The NUMA socket id to which the Ethernet device is connected or
|
|
* a default of zero if the socket could not be determined.
|
|
* -1 is returned is the port_id value is out of range.
|
|
*/
|
|
int rte_eth_dev_socket_id(uint8_t port_id);
|
|
|
|
/*
|
|
* Check if port_id of device is attached
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device
|
|
* @return
|
|
* - 0 if port is out of range or not attached
|
|
* - 1 if device is attached
|
|
*/
|
|
int rte_eth_dev_is_valid_port(uint8_t port_id);
|
|
|
|
/*
|
|
* Allocate mbuf from mempool, setup the DMA physical address
|
|
* and then start RX for specified queue of a port. It is used
|
|
* when rx_deferred_start flag of the specified queue is true.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device
|
|
* @param rx_queue_id
|
|
* The index of the rx queue to update the ring.
|
|
* The value must be in the range [0, nb_rx_queue - 1] previously supplied
|
|
* to rte_eth_dev_configure().
|
|
* @return
|
|
* - 0: Success, the transmit queue is correctly set up.
|
|
* - -EINVAL: The port_id or the queue_id out of range.
|
|
* - -ENOTSUP: The function not supported in PMD driver.
|
|
*/
|
|
int rte_eth_dev_rx_queue_start(uint8_t port_id, uint16_t rx_queue_id);
|
|
|
|
/*
|
|
* Stop specified RX queue of a port
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device
|
|
* @param rx_queue_id
|
|
* The index of the rx queue to update the ring.
|
|
* The value must be in the range [0, nb_rx_queue - 1] previously supplied
|
|
* to rte_eth_dev_configure().
|
|
* @return
|
|
* - 0: Success, the transmit queue is correctly set up.
|
|
* - -EINVAL: The port_id or the queue_id out of range.
|
|
* - -ENOTSUP: The function not supported in PMD driver.
|
|
*/
|
|
int rte_eth_dev_rx_queue_stop(uint8_t port_id, uint16_t rx_queue_id);
|
|
|
|
/*
|
|
* Start TX for specified queue of a port. It is used when tx_deferred_start
|
|
* flag of the specified queue is true.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device
|
|
* @param tx_queue_id
|
|
* The index of the tx queue to update the ring.
|
|
* The value must be in the range [0, nb_tx_queue - 1] previously supplied
|
|
* to rte_eth_dev_configure().
|
|
* @return
|
|
* - 0: Success, the transmit queue is correctly set up.
|
|
* - -EINVAL: The port_id or the queue_id out of range.
|
|
* - -ENOTSUP: The function not supported in PMD driver.
|
|
*/
|
|
int rte_eth_dev_tx_queue_start(uint8_t port_id, uint16_t tx_queue_id);
|
|
|
|
/*
|
|
* Stop specified TX queue of a port
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device
|
|
* @param tx_queue_id
|
|
* The index of the tx queue to update the ring.
|
|
* The value must be in the range [0, nb_tx_queue - 1] previously supplied
|
|
* to rte_eth_dev_configure().
|
|
* @return
|
|
* - 0: Success, the transmit queue is correctly set up.
|
|
* - -EINVAL: The port_id or the queue_id out of range.
|
|
* - -ENOTSUP: The function not supported in PMD driver.
|
|
*/
|
|
int rte_eth_dev_tx_queue_stop(uint8_t port_id, uint16_t tx_queue_id);
|
|
|
|
|
|
|
|
/**
|
|
* Start an Ethernet device.
|
|
*
|
|
* The device start step is the last one and consists of setting the configured
|
|
* offload features and in starting the transmit and the receive units of the
|
|
* device.
|
|
* On success, all basic functions exported by the Ethernet API (link status,
|
|
* receive/transmit, and so on) can be invoked.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @return
|
|
* - 0: Success, Ethernet device started.
|
|
* - <0: Error code of the driver device start function.
|
|
*/
|
|
int rte_eth_dev_start(uint8_t port_id);
|
|
|
|
/**
|
|
* Stop an Ethernet device. The device can be restarted with a call to
|
|
* rte_eth_dev_start()
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
*/
|
|
void rte_eth_dev_stop(uint8_t port_id);
|
|
|
|
|
|
/**
|
|
* Link up an Ethernet device.
|
|
*
|
|
* Set device link up will re-enable the device rx/tx
|
|
* functionality after it is previously set device linked down.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @return
|
|
* - 0: Success, Ethernet device linked up.
|
|
* - <0: Error code of the driver device link up function.
|
|
*/
|
|
int rte_eth_dev_set_link_up(uint8_t port_id);
|
|
|
|
/**
|
|
* Link down an Ethernet device.
|
|
* The device rx/tx functionality will be disabled if success,
|
|
* and it can be re-enabled with a call to
|
|
* rte_eth_dev_set_link_up()
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
*/
|
|
int rte_eth_dev_set_link_down(uint8_t port_id);
|
|
|
|
/**
|
|
* Close a stopped Ethernet device. The device cannot be restarted!
|
|
* The function frees all resources except for needed by the
|
|
* closed state. To free these resources, call rte_eth_dev_detach().
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
*/
|
|
void rte_eth_dev_close(uint8_t port_id);
|
|
|
|
/**
|
|
* Enable receipt in promiscuous mode for an Ethernet device.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
*/
|
|
void rte_eth_promiscuous_enable(uint8_t port_id);
|
|
|
|
/**
|
|
* Disable receipt in promiscuous mode for an Ethernet device.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
*/
|
|
void rte_eth_promiscuous_disable(uint8_t port_id);
|
|
|
|
/**
|
|
* Return the value of promiscuous mode for an Ethernet device.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @return
|
|
* - (1) if promiscuous is enabled
|
|
* - (0) if promiscuous is disabled.
|
|
* - (-1) on error
|
|
*/
|
|
int rte_eth_promiscuous_get(uint8_t port_id);
|
|
|
|
/**
|
|
* Enable the receipt of any multicast frame by an Ethernet device.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
*/
|
|
void rte_eth_allmulticast_enable(uint8_t port_id);
|
|
|
|
/**
|
|
* Disable the receipt of all multicast frames by an Ethernet device.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
*/
|
|
void rte_eth_allmulticast_disable(uint8_t port_id);
|
|
|
|
/**
|
|
* Return the value of allmulticast mode for an Ethernet device.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @return
|
|
* - (1) if allmulticast is enabled
|
|
* - (0) if allmulticast is disabled.
|
|
* - (-1) on error
|
|
*/
|
|
int rte_eth_allmulticast_get(uint8_t port_id);
|
|
|
|
/**
|
|
* Retrieve the status (ON/OFF), the speed (in Mbps) and the mode (HALF-DUPLEX
|
|
* or FULL-DUPLEX) of the physical link of an Ethernet device. It might need
|
|
* to wait up to 9 seconds in it.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param link
|
|
* A pointer to an *rte_eth_link* structure to be filled with
|
|
* the status, the speed and the mode of the Ethernet device link.
|
|
*/
|
|
void rte_eth_link_get(uint8_t port_id, struct rte_eth_link *link);
|
|
|
|
/**
|
|
* Retrieve the status (ON/OFF), the speed (in Mbps) and the mode (HALF-DUPLEX
|
|
* or FULL-DUPLEX) of the physical link of an Ethernet device. It is a no-wait
|
|
* version of rte_eth_link_get().
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param link
|
|
* A pointer to an *rte_eth_link* structure to be filled with
|
|
* the status, the speed and the mode of the Ethernet device link.
|
|
*/
|
|
void rte_eth_link_get_nowait(uint8_t port_id, struct rte_eth_link *link);
|
|
|
|
/**
|
|
* Retrieve the general I/O statistics of an Ethernet device.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param stats
|
|
* A pointer to a structure of type *rte_eth_stats* to be filled with
|
|
* the values of device counters for the following set of statistics:
|
|
* - *ipackets* with the total of successfully received packets.
|
|
* - *opackets* with the total of successfully transmitted packets.
|
|
* - *ibytes* with the total of successfully received bytes.
|
|
* - *obytes* with the total of successfully transmitted bytes.
|
|
* - *ierrors* with the total of erroneous received packets.
|
|
* - *oerrors* with the total of failed transmitted packets.
|
|
* @return
|
|
* Zero if successful. Non-zero otherwise.
|
|
*/
|
|
int rte_eth_stats_get(uint8_t port_id, struct rte_eth_stats *stats);
|
|
|
|
/**
|
|
* Reset the general I/O statistics of an Ethernet device.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
*/
|
|
void rte_eth_stats_reset(uint8_t port_id);
|
|
|
|
/**
|
|
* Retrieve extended statistics of an Ethernet device.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param xstats
|
|
* A pointer to a table of structure of type *rte_eth_xstats*
|
|
* to be filled with device statistics names and values.
|
|
* This parameter can be set to NULL if n is 0.
|
|
* @param n
|
|
* The size of the stats table, which should be large enough to store
|
|
* all the statistics of the device.
|
|
* @return
|
|
* - positive value lower or equal to n: success. The return value
|
|
* is the number of entries filled in the stats table.
|
|
* - positive value higher than n: error, the given statistics table
|
|
* is too small. The return value corresponds to the size that should
|
|
* be given to succeed. The entries in the table are not valid and
|
|
* shall not be used by the caller.
|
|
* - negative value on error (invalid port id)
|
|
*/
|
|
int rte_eth_xstats_get(uint8_t port_id, struct rte_eth_xstats *xstats,
|
|
unsigned n);
|
|
|
|
/**
|
|
* Reset extended statistics of an Ethernet device.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
*/
|
|
void rte_eth_xstats_reset(uint8_t port_id);
|
|
|
|
/**
|
|
* Set a mapping for the specified transmit queue to the specified per-queue
|
|
* statistics counter.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param tx_queue_id
|
|
* The index of the transmit queue for which a queue stats mapping is required.
|
|
* The value must be in the range [0, nb_tx_queue - 1] previously supplied
|
|
* to rte_eth_dev_configure().
|
|
* @param stat_idx
|
|
* The per-queue packet statistics functionality number that the transmit
|
|
* queue is to be assigned.
|
|
* The value must be in the range [0, RTE_MAX_ETHPORT_QUEUE_STATS_MAPS - 1].
|
|
* @return
|
|
* Zero if successful. Non-zero otherwise.
|
|
*/
|
|
int rte_eth_dev_set_tx_queue_stats_mapping(uint8_t port_id,
|
|
uint16_t tx_queue_id, uint8_t stat_idx);
|
|
|
|
/**
|
|
* Set a mapping for the specified receive queue to the specified per-queue
|
|
* statistics counter.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param rx_queue_id
|
|
* The index of the receive queue for which a queue stats mapping is required.
|
|
* The value must be in the range [0, nb_rx_queue - 1] previously supplied
|
|
* to rte_eth_dev_configure().
|
|
* @param stat_idx
|
|
* The per-queue packet statistics functionality number that the receive
|
|
* queue is to be assigned.
|
|
* The value must be in the range [0, RTE_MAX_ETHPORT_QUEUE_STATS_MAPS - 1].
|
|
* @return
|
|
* Zero if successful. Non-zero otherwise.
|
|
*/
|
|
int rte_eth_dev_set_rx_queue_stats_mapping(uint8_t port_id,
|
|
uint16_t rx_queue_id,
|
|
uint8_t stat_idx);
|
|
|
|
/**
|
|
* Retrieve the Ethernet address of an Ethernet device.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param mac_addr
|
|
* A pointer to a structure of type *ether_addr* to be filled with
|
|
* the Ethernet address of the Ethernet device.
|
|
*/
|
|
void rte_eth_macaddr_get(uint8_t port_id, struct ether_addr *mac_addr);
|
|
|
|
/**
|
|
* Retrieve the contextual information of an Ethernet device.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param dev_info
|
|
* A pointer to a structure of type *rte_eth_dev_info* to be filled with
|
|
* the contextual information of the Ethernet device.
|
|
*/
|
|
void rte_eth_dev_info_get(uint8_t port_id, struct rte_eth_dev_info *dev_info);
|
|
|
|
/**
|
|
* Retrieve the MTU of an Ethernet device.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param mtu
|
|
* A pointer to a uint16_t where the retrieved MTU is to be stored.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
*/
|
|
int rte_eth_dev_get_mtu(uint8_t port_id, uint16_t *mtu);
|
|
|
|
/**
|
|
* Change the MTU of an Ethernet device.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param mtu
|
|
* A uint16_t for the MTU to be applied.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if operation is not supported.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
* - (-EINVAL) if *mtu* invalid.
|
|
*/
|
|
int rte_eth_dev_set_mtu(uint8_t port_id, uint16_t mtu);
|
|
|
|
/**
|
|
* Enable/Disable hardware filtering by an Ethernet device of received
|
|
* VLAN packets tagged with a given VLAN Tag Identifier.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param vlan_id
|
|
* The VLAN Tag Identifier whose filtering must be enabled or disabled.
|
|
* @param on
|
|
* If > 0, enable VLAN filtering of VLAN packets tagged with *vlan_id*.
|
|
* Otherwise, disable VLAN filtering of VLAN packets tagged with *vlan_id*.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOSUP) if hardware-assisted VLAN filtering not configured.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
* - (-ENOSYS) if VLAN filtering on *port_id* disabled.
|
|
* - (-EINVAL) if *vlan_id* > 4095.
|
|
*/
|
|
int rte_eth_dev_vlan_filter(uint8_t port_id, uint16_t vlan_id, int on);
|
|
|
|
/**
|
|
* Enable/Disable hardware VLAN Strip by a rx queue of an Ethernet device.
|
|
* 82599/X540/X550 can support VLAN stripping at the rx queue level
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param rx_queue_id
|
|
* The index of the receive queue for which a queue stats mapping is required.
|
|
* The value must be in the range [0, nb_rx_queue - 1] previously supplied
|
|
* to rte_eth_dev_configure().
|
|
* @param on
|
|
* If 1, Enable VLAN Stripping of the receive queue of the Ethernet port.
|
|
* If 0, Disable VLAN Stripping of the receive queue of the Ethernet port.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOSUP) if hardware-assisted VLAN stripping not configured.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
* - (-EINVAL) if *rx_queue_id* invalid.
|
|
*/
|
|
int rte_eth_dev_set_vlan_strip_on_queue(uint8_t port_id, uint16_t rx_queue_id,
|
|
int on);
|
|
|
|
/**
|
|
* Set the Outer VLAN Ether Type by an Ethernet device, it can be inserted to
|
|
* the VLAN Header. This is a register setup available on some Intel NIC, not
|
|
* but all, please check the data sheet for availability.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param tag_type
|
|
* The Tag Protocol ID
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOSUP) if hardware-assisted VLAN TPID setup is not supported.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
*/
|
|
int rte_eth_dev_set_vlan_ether_type(uint8_t port_id, uint16_t tag_type);
|
|
|
|
/**
|
|
* Set VLAN offload configuration on an Ethernet device
|
|
* Enable/Disable Extended VLAN by an Ethernet device, This is a register setup
|
|
* available on some Intel NIC, not but all, please check the data sheet for
|
|
* availability.
|
|
* Enable/Disable VLAN Strip can be done on rx queue for certain NIC, but here
|
|
* the configuration is applied on the port level.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param offload_mask
|
|
* The VLAN Offload bit mask can be mixed use with "OR"
|
|
* ETH_VLAN_STRIP_OFFLOAD
|
|
* ETH_VLAN_FILTER_OFFLOAD
|
|
* ETH_VLAN_EXTEND_OFFLOAD
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOSUP) if hardware-assisted VLAN filtering not configured.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
*/
|
|
int rte_eth_dev_set_vlan_offload(uint8_t port_id, int offload_mask);
|
|
|
|
/**
|
|
* Read VLAN Offload configuration from an Ethernet device
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @return
|
|
* - (>0) if successful. Bit mask to indicate
|
|
* ETH_VLAN_STRIP_OFFLOAD
|
|
* ETH_VLAN_FILTER_OFFLOAD
|
|
* ETH_VLAN_EXTEND_OFFLOAD
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
*/
|
|
int rte_eth_dev_get_vlan_offload(uint8_t port_id);
|
|
|
|
/**
|
|
* Set port based TX VLAN insersion on or off.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param pvid
|
|
* Port based TX VLAN identifier togeth with user priority.
|
|
* @param on
|
|
* Turn on or off the port based TX VLAN insertion.
|
|
*
|
|
* @return
|
|
* - (0) if successful.
|
|
* - negative if failed.
|
|
*/
|
|
int rte_eth_dev_set_vlan_pvid(uint8_t port_id, uint16_t pvid, int on);
|
|
|
|
/**
|
|
*
|
|
* Retrieve a burst of input packets from a receive queue of an Ethernet
|
|
* device. The retrieved packets are stored in *rte_mbuf* structures whose
|
|
* pointers are supplied in the *rx_pkts* array.
|
|
*
|
|
* The rte_eth_rx_burst() function loops, parsing the RX ring of the
|
|
* receive queue, up to *nb_pkts* packets, and for each completed RX
|
|
* descriptor in the ring, it performs the following operations:
|
|
*
|
|
* - Initialize the *rte_mbuf* data structure associated with the
|
|
* RX descriptor according to the information provided by the NIC into
|
|
* that RX descriptor.
|
|
*
|
|
* - Store the *rte_mbuf* data structure into the next entry of the
|
|
* *rx_pkts* array.
|
|
*
|
|
* - Replenish the RX descriptor with a new *rte_mbuf* buffer
|
|
* allocated from the memory pool associated with the receive queue at
|
|
* initialization time.
|
|
*
|
|
* When retrieving an input packet that was scattered by the controller
|
|
* into multiple receive descriptors, the rte_eth_rx_burst() function
|
|
* appends the associated *rte_mbuf* buffers to the first buffer of the
|
|
* packet.
|
|
*
|
|
* The rte_eth_rx_burst() function returns the number of packets
|
|
* actually retrieved, which is the number of *rte_mbuf* data structures
|
|
* effectively supplied into the *rx_pkts* array.
|
|
* A return value equal to *nb_pkts* indicates that the RX queue contained
|
|
* at least *rx_pkts* packets, and this is likely to signify that other
|
|
* received packets remain in the input queue. Applications implementing
|
|
* a "retrieve as much received packets as possible" policy can check this
|
|
* specific case and keep invoking the rte_eth_rx_burst() function until
|
|
* a value less than *nb_pkts* is returned.
|
|
*
|
|
* This receive method has the following advantages:
|
|
*
|
|
* - It allows a run-to-completion network stack engine to retrieve and
|
|
* to immediately process received packets in a fast burst-oriented
|
|
* approach, avoiding the overhead of unnecessary intermediate packet
|
|
* queue/dequeue operations.
|
|
*
|
|
* - Conversely, it also allows an asynchronous-oriented processing
|
|
* method to retrieve bursts of received packets and to immediately
|
|
* queue them for further parallel processing by another logical core,
|
|
* for instance. However, instead of having received packets being
|
|
* individually queued by the driver, this approach allows the invoker
|
|
* of the rte_eth_rx_burst() function to queue a burst of retrieved
|
|
* packets at a time and therefore dramatically reduce the cost of
|
|
* enqueue/dequeue operations per packet.
|
|
*
|
|
* - It allows the rte_eth_rx_burst() function of the driver to take
|
|
* advantage of burst-oriented hardware features (CPU cache,
|
|
* prefetch instructions, and so on) to minimize the number of CPU
|
|
* cycles per packet.
|
|
*
|
|
* To summarize, the proposed receive API enables many
|
|
* burst-oriented optimizations in both synchronous and asynchronous
|
|
* packet processing environments with no overhead in both cases.
|
|
*
|
|
* The rte_eth_rx_burst() function does not provide any error
|
|
* notification to avoid the corresponding overhead. As a hint, the
|
|
* upper-level application might check the status of the device link once
|
|
* being systematically returned a 0 value for a given number of tries.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param queue_id
|
|
* The index of the receive queue from which to retrieve input packets.
|
|
* The value must be in the range [0, nb_rx_queue - 1] previously supplied
|
|
* to rte_eth_dev_configure().
|
|
* @param rx_pkts
|
|
* The address of an array of pointers to *rte_mbuf* structures that
|
|
* must be large enough to store *nb_pkts* pointers in it.
|
|
* @param nb_pkts
|
|
* The maximum number of packets to retrieve.
|
|
* @return
|
|
* The number of packets actually retrieved, which is the number
|
|
* of pointers to *rte_mbuf* structures effectively supplied to the
|
|
* *rx_pkts* array.
|
|
*/
|
|
static inline uint16_t
|
|
rte_eth_rx_burst(uint8_t port_id, uint16_t queue_id,
|
|
struct rte_mbuf **rx_pkts, const uint16_t nb_pkts)
|
|
{
|
|
struct rte_eth_dev *dev = &rte_eth_devices[port_id];
|
|
|
|
#ifdef RTE_LIBRTE_ETHDEV_DEBUG
|
|
RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, 0);
|
|
RTE_FUNC_PTR_OR_ERR_RET(*dev->rx_pkt_burst, 0);
|
|
|
|
if (queue_id >= dev->data->nb_rx_queues) {
|
|
RTE_PMD_DEBUG_TRACE("Invalid RX queue_id=%d\n", queue_id);
|
|
return 0;
|
|
}
|
|
#endif
|
|
int16_t nb_rx = (*dev->rx_pkt_burst)(dev->data->rx_queues[queue_id],
|
|
rx_pkts, nb_pkts);
|
|
|
|
#ifdef RTE_ETHDEV_RXTX_CALLBACKS
|
|
struct rte_eth_rxtx_callback *cb = dev->post_rx_burst_cbs[queue_id];
|
|
|
|
if (unlikely(cb != NULL)) {
|
|
do {
|
|
nb_rx = cb->fn.rx(port_id, queue_id, rx_pkts, nb_rx,
|
|
nb_pkts, cb->param);
|
|
cb = cb->next;
|
|
} while (cb != NULL);
|
|
}
|
|
#endif
|
|
|
|
return nb_rx;
|
|
}
|
|
|
|
/**
|
|
* Get the number of used descriptors in a specific queue
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param queue_id
|
|
* The queue id on the specific port.
|
|
* @return
|
|
* The number of used descriptors in the specific queue, or:
|
|
* (-EINVAL) if *port_id* is invalid
|
|
* (-ENOTSUP) if the device does not support this function
|
|
*/
|
|
static inline int
|
|
rte_eth_rx_queue_count(uint8_t port_id, uint16_t queue_id)
|
|
{
|
|
struct rte_eth_dev *dev = &rte_eth_devices[port_id];
|
|
RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
|
|
RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_queue_count, -ENOTSUP);
|
|
return (*dev->dev_ops->rx_queue_count)(dev, queue_id);
|
|
}
|
|
|
|
/**
|
|
* Check if the DD bit of the specific RX descriptor in the queue has been set
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param queue_id
|
|
* The queue id on the specific port.
|
|
* @param offset
|
|
* The offset of the descriptor ID from tail.
|
|
* @return
|
|
* - (1) if the specific DD bit is set.
|
|
* - (0) if the specific DD bit is not set.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
* - (-ENOTSUP) if the device does not support this function
|
|
*/
|
|
static inline int
|
|
rte_eth_rx_descriptor_done(uint8_t port_id, uint16_t queue_id, uint16_t offset)
|
|
{
|
|
struct rte_eth_dev *dev = &rte_eth_devices[port_id];
|
|
RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
|
|
RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_descriptor_done, -ENOTSUP);
|
|
return (*dev->dev_ops->rx_descriptor_done)( \
|
|
dev->data->rx_queues[queue_id], offset);
|
|
}
|
|
|
|
/**
|
|
* Send a burst of output packets on a transmit queue of an Ethernet device.
|
|
*
|
|
* The rte_eth_tx_burst() function is invoked to transmit output packets
|
|
* on the output queue *queue_id* of the Ethernet device designated by its
|
|
* *port_id*.
|
|
* The *nb_pkts* parameter is the number of packets to send which are
|
|
* supplied in the *tx_pkts* array of *rte_mbuf* structures.
|
|
* The rte_eth_tx_burst() function loops, sending *nb_pkts* packets,
|
|
* up to the number of transmit descriptors available in the TX ring of the
|
|
* transmit queue.
|
|
* For each packet to send, the rte_eth_tx_burst() function performs
|
|
* the following operations:
|
|
*
|
|
* - Pick up the next available descriptor in the transmit ring.
|
|
*
|
|
* - Free the network buffer previously sent with that descriptor, if any.
|
|
*
|
|
* - Initialize the transmit descriptor with the information provided
|
|
* in the *rte_mbuf data structure.
|
|
*
|
|
* In the case of a segmented packet composed of a list of *rte_mbuf* buffers,
|
|
* the rte_eth_tx_burst() function uses several transmit descriptors
|
|
* of the ring.
|
|
*
|
|
* The rte_eth_tx_burst() function returns the number of packets it
|
|
* actually sent. A return value equal to *nb_pkts* means that all packets
|
|
* have been sent, and this is likely to signify that other output packets
|
|
* could be immediately transmitted again. Applications that implement a
|
|
* "send as many packets to transmit as possible" policy can check this
|
|
* specific case and keep invoking the rte_eth_tx_burst() function until
|
|
* a value less than *nb_pkts* is returned.
|
|
*
|
|
* It is the responsibility of the rte_eth_tx_burst() function to
|
|
* transparently free the memory buffers of packets previously sent.
|
|
* This feature is driven by the *tx_free_thresh* value supplied to the
|
|
* rte_eth_dev_configure() function at device configuration time.
|
|
* When the number of free TX descriptors drops below this threshold, the
|
|
* rte_eth_tx_burst() function must [attempt to] free the *rte_mbuf* buffers
|
|
* of those packets whose transmission was effectively completed.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param queue_id
|
|
* The index of the transmit queue through which output packets must be
|
|
* sent.
|
|
* The value must be in the range [0, nb_tx_queue - 1] previously supplied
|
|
* to rte_eth_dev_configure().
|
|
* @param tx_pkts
|
|
* The address of an array of *nb_pkts* pointers to *rte_mbuf* structures
|
|
* which contain the output packets.
|
|
* @param nb_pkts
|
|
* The maximum number of packets to transmit.
|
|
* @return
|
|
* The number of output packets actually stored in transmit descriptors of
|
|
* the transmit ring. The return value can be less than the value of the
|
|
* *tx_pkts* parameter when the transmit ring is full or has been filled up.
|
|
*/
|
|
static inline uint16_t
|
|
rte_eth_tx_burst(uint8_t port_id, uint16_t queue_id,
|
|
struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
|
|
{
|
|
struct rte_eth_dev *dev = &rte_eth_devices[port_id];
|
|
|
|
#ifdef RTE_LIBRTE_ETHDEV_DEBUG
|
|
RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, 0);
|
|
RTE_FUNC_PTR_OR_ERR_RET(*dev->tx_pkt_burst, 0);
|
|
|
|
if (queue_id >= dev->data->nb_tx_queues) {
|
|
RTE_PMD_DEBUG_TRACE("Invalid TX queue_id=%d\n", queue_id);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef RTE_ETHDEV_RXTX_CALLBACKS
|
|
struct rte_eth_rxtx_callback *cb = dev->pre_tx_burst_cbs[queue_id];
|
|
|
|
if (unlikely(cb != NULL)) {
|
|
do {
|
|
nb_pkts = cb->fn.tx(port_id, queue_id, tx_pkts, nb_pkts,
|
|
cb->param);
|
|
cb = cb->next;
|
|
} while (cb != NULL);
|
|
}
|
|
#endif
|
|
|
|
return (*dev->tx_pkt_burst)(dev->data->tx_queues[queue_id], tx_pkts, nb_pkts);
|
|
}
|
|
|
|
/**
|
|
* The eth device event type for interrupt, and maybe others in the future.
|
|
*/
|
|
enum rte_eth_event_type {
|
|
RTE_ETH_EVENT_UNKNOWN, /**< unknown event type */
|
|
RTE_ETH_EVENT_INTR_LSC, /**< lsc interrupt event */
|
|
RTE_ETH_EVENT_MAX /**< max value of this enum */
|
|
};
|
|
|
|
typedef void (*rte_eth_dev_cb_fn)(uint8_t port_id, \
|
|
enum rte_eth_event_type event, void *cb_arg);
|
|
/**< user application callback to be registered for interrupts */
|
|
|
|
|
|
|
|
/**
|
|
* Register a callback function for specific port id.
|
|
*
|
|
* @param port_id
|
|
* Port id.
|
|
* @param event
|
|
* Event interested.
|
|
* @param cb_fn
|
|
* User supplied callback function to be called.
|
|
* @param cb_arg
|
|
* Pointer to the parameters for the registered callback.
|
|
*
|
|
* @return
|
|
* - On success, zero.
|
|
* - On failure, a negative value.
|
|
*/
|
|
int rte_eth_dev_callback_register(uint8_t port_id,
|
|
enum rte_eth_event_type event,
|
|
rte_eth_dev_cb_fn cb_fn, void *cb_arg);
|
|
|
|
/**
|
|
* Unregister a callback function for specific port id.
|
|
*
|
|
* @param port_id
|
|
* Port id.
|
|
* @param event
|
|
* Event interested.
|
|
* @param cb_fn
|
|
* User supplied callback function to be called.
|
|
* @param cb_arg
|
|
* Pointer to the parameters for the registered callback. -1 means to
|
|
* remove all for the same callback address and same event.
|
|
*
|
|
* @return
|
|
* - On success, zero.
|
|
* - On failure, a negative value.
|
|
*/
|
|
int rte_eth_dev_callback_unregister(uint8_t port_id,
|
|
enum rte_eth_event_type event,
|
|
rte_eth_dev_cb_fn cb_fn, void *cb_arg);
|
|
|
|
/**
|
|
* @internal Executes all the user application registered callbacks for
|
|
* the specific device. It is for DPDK internal user only. User
|
|
* application should not call it directly.
|
|
*
|
|
* @param dev
|
|
* Pointer to struct rte_eth_dev.
|
|
* @param event
|
|
* Eth device interrupt event type.
|
|
*
|
|
* @return
|
|
* void
|
|
*/
|
|
void _rte_eth_dev_callback_process(struct rte_eth_dev *dev,
|
|
enum rte_eth_event_type event);
|
|
|
|
/**
|
|
* When there is no rx packet coming in Rx Queue for a long time, we can
|
|
* sleep lcore related to RX Queue for power saving, and enable rx interrupt
|
|
* to be triggered when rx packect arrives.
|
|
*
|
|
* The rte_eth_dev_rx_intr_enable() function enables rx queue
|
|
* interrupt on specific rx queue of a port.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param queue_id
|
|
* The index of the receive queue from which to retrieve input packets.
|
|
* The value must be in the range [0, nb_rx_queue - 1] previously supplied
|
|
* to rte_eth_dev_configure().
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if underlying hardware OR driver doesn't support
|
|
* that operation.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
*/
|
|
int rte_eth_dev_rx_intr_enable(uint8_t port_id, uint16_t queue_id);
|
|
|
|
/**
|
|
* When lcore wakes up from rx interrupt indicating packet coming, disable rx
|
|
* interrupt and returns to polling mode.
|
|
*
|
|
* The rte_eth_dev_rx_intr_disable() function disables rx queue
|
|
* interrupt on specific rx queue of a port.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param queue_id
|
|
* The index of the receive queue from which to retrieve input packets.
|
|
* The value must be in the range [0, nb_rx_queue - 1] previously supplied
|
|
* to rte_eth_dev_configure().
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if underlying hardware OR driver doesn't support
|
|
* that operation.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
*/
|
|
int rte_eth_dev_rx_intr_disable(uint8_t port_id, uint16_t queue_id);
|
|
|
|
/**
|
|
* RX Interrupt control per port.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param epfd
|
|
* Epoll instance fd which the intr vector associated to.
|
|
* Using RTE_EPOLL_PER_THREAD allows to use per thread epoll instance.
|
|
* @param op
|
|
* The operation be performed for the vector.
|
|
* Operation type of {RTE_INTR_EVENT_ADD, RTE_INTR_EVENT_DEL}.
|
|
* @param data
|
|
* User raw data.
|
|
* @return
|
|
* - On success, zero.
|
|
* - On failure, a negative value.
|
|
*/
|
|
int rte_eth_dev_rx_intr_ctl(uint8_t port_id, int epfd, int op, void *data);
|
|
|
|
/**
|
|
* RX Interrupt control per queue.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param queue_id
|
|
* The index of the receive queue from which to retrieve input packets.
|
|
* The value must be in the range [0, nb_rx_queue - 1] previously supplied
|
|
* to rte_eth_dev_configure().
|
|
* @param epfd
|
|
* Epoll instance fd which the intr vector associated to.
|
|
* Using RTE_EPOLL_PER_THREAD allows to use per thread epoll instance.
|
|
* @param op
|
|
* The operation be performed for the vector.
|
|
* Operation type of {RTE_INTR_EVENT_ADD, RTE_INTR_EVENT_DEL}.
|
|
* @param data
|
|
* User raw data.
|
|
* @return
|
|
* - On success, zero.
|
|
* - On failure, a negative value.
|
|
*/
|
|
int rte_eth_dev_rx_intr_ctl_q(uint8_t port_id, uint16_t queue_id,
|
|
int epfd, int op, void *data);
|
|
|
|
/**
|
|
* Turn on the LED on the Ethernet device.
|
|
* This function turns on the LED on the Ethernet device.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if underlying hardware OR driver doesn't support
|
|
* that operation.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
*/
|
|
int rte_eth_led_on(uint8_t port_id);
|
|
|
|
/**
|
|
* Turn off the LED on the Ethernet device.
|
|
* This function turns off the LED on the Ethernet device.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if underlying hardware OR driver doesn't support
|
|
* that operation.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
*/
|
|
int rte_eth_led_off(uint8_t port_id);
|
|
|
|
/**
|
|
* Get current status of the Ethernet link flow control for Ethernet device
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param fc_conf
|
|
* The pointer to the structure where to store the flow control parameters.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support flow control.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
*/
|
|
int rte_eth_dev_flow_ctrl_get(uint8_t port_id,
|
|
struct rte_eth_fc_conf *fc_conf);
|
|
|
|
/**
|
|
* Configure the Ethernet link flow control for Ethernet device
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param fc_conf
|
|
* The pointer to the structure of the flow control parameters.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support flow control mode.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
* - (-EINVAL) if bad parameter
|
|
* - (-EIO) if flow control setup failure
|
|
*/
|
|
int rte_eth_dev_flow_ctrl_set(uint8_t port_id,
|
|
struct rte_eth_fc_conf *fc_conf);
|
|
|
|
/**
|
|
* Configure the Ethernet priority flow control under DCB environment
|
|
* for Ethernet device.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param pfc_conf
|
|
* The pointer to the structure of the priority flow control parameters.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support priority flow control mode.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
* - (-EINVAL) if bad parameter
|
|
* - (-EIO) if flow control setup failure
|
|
*/
|
|
int rte_eth_dev_priority_flow_ctrl_set(uint8_t port_id,
|
|
struct rte_eth_pfc_conf *pfc_conf);
|
|
|
|
/**
|
|
* Add a MAC address to an internal array of addresses used to enable whitelist
|
|
* filtering to accept packets only if the destination MAC address matches.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param mac_addr
|
|
* The MAC address to add.
|
|
* @param pool
|
|
* VMDq pool index to associate address with (if VMDq is enabled). If VMDq is
|
|
* not enabled, this should be set to 0.
|
|
* @return
|
|
* - (0) if successfully added or *mac_addr" was already added.
|
|
* - (-ENOTSUP) if hardware doesn't support this feature.
|
|
* - (-ENODEV) if *port* is invalid.
|
|
* - (-ENOSPC) if no more MAC addresses can be added.
|
|
* - (-EINVAL) if MAC address is invalid.
|
|
*/
|
|
int rte_eth_dev_mac_addr_add(uint8_t port, struct ether_addr *mac_addr,
|
|
uint32_t pool);
|
|
|
|
/**
|
|
* Remove a MAC address from the internal array of addresses.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param mac_addr
|
|
* MAC address to remove.
|
|
* @return
|
|
* - (0) if successful, or *mac_addr* didn't exist.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-EADDRINUSE) if attempting to remove the default MAC address
|
|
*/
|
|
int rte_eth_dev_mac_addr_remove(uint8_t port, struct ether_addr *mac_addr);
|
|
|
|
/**
|
|
* Set the default MAC address.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param mac_addr
|
|
* New default MAC address.
|
|
* @return
|
|
* - (0) if successful, or *mac_addr* didn't exist.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-ENODEV) if *port* invalid.
|
|
* - (-EINVAL) if MAC address is invalid.
|
|
*/
|
|
int rte_eth_dev_default_mac_addr_set(uint8_t port, struct ether_addr *mac_addr);
|
|
|
|
|
|
/**
|
|
* Update Redirection Table(RETA) of Receive Side Scaling of Ethernet device.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param reta_conf
|
|
* RETA to update.
|
|
* @param reta_size
|
|
* Redirection table size. The table size can be queried by
|
|
* rte_eth_dev_info_get().
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_eth_dev_rss_reta_update(uint8_t port,
|
|
struct rte_eth_rss_reta_entry64 *reta_conf,
|
|
uint16_t reta_size);
|
|
|
|
/**
|
|
* Query Redirection Table(RETA) of Receive Side Scaling of Ethernet device.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param reta_conf
|
|
* RETA to query.
|
|
* @param reta_size
|
|
* Redirection table size. The table size can be queried by
|
|
* rte_eth_dev_info_get().
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_eth_dev_rss_reta_query(uint8_t port,
|
|
struct rte_eth_rss_reta_entry64 *reta_conf,
|
|
uint16_t reta_size);
|
|
|
|
/**
|
|
* Updates unicast hash table for receiving packet with the given destination
|
|
* MAC address, and the packet is routed to all VFs for which the RX mode is
|
|
* accept packets that match the unicast hash table.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param addr
|
|
* Unicast MAC address.
|
|
* @param on
|
|
* 1 - Set an unicast hash bit for receiving packets with the MAC address.
|
|
* 0 - Clear an unicast hash bit.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_eth_dev_uc_hash_table_set(uint8_t port,struct ether_addr *addr,
|
|
uint8_t on);
|
|
|
|
/**
|
|
* Updates all unicast hash bitmaps for receiving packet with any Unicast
|
|
* Ethernet MAC addresses,the packet is routed to all VFs for which the RX
|
|
* mode is accept packets that match the unicast hash table.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param on
|
|
* 1 - Set all unicast hash bitmaps for receiving all the Ethernet
|
|
* MAC addresses
|
|
* 0 - Clear all unicast hash bitmaps
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_eth_dev_uc_all_hash_table_set(uint8_t port,uint8_t on);
|
|
|
|
/**
|
|
* Set RX L2 Filtering mode of a VF of an Ethernet device.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param vf
|
|
* VF id.
|
|
* @param rx_mode
|
|
* The RX mode mask, which is one or more of accepting Untagged Packets,
|
|
* packets that match the PFUTA table, Broadcast and Multicast Promiscuous.
|
|
* ETH_VMDQ_ACCEPT_UNTAG,ETH_VMDQ_ACCEPT_HASH_UC,
|
|
* ETH_VMDQ_ACCEPT_BROADCAST and ETH_VMDQ_ACCEPT_MULTICAST will be used
|
|
* in rx_mode.
|
|
* @param on
|
|
* 1 - Enable a VF RX mode.
|
|
* 0 - Disable a VF RX mode.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_eth_dev_set_vf_rxmode(uint8_t port, uint16_t vf, uint16_t rx_mode,
|
|
uint8_t on);
|
|
|
|
/**
|
|
* Enable or disable a VF traffic transmit of the Ethernet device.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param vf
|
|
* VF id.
|
|
* @param on
|
|
* 1 - Enable a VF traffic transmit.
|
|
* 0 - Disable a VF traffic transmit.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int
|
|
rte_eth_dev_set_vf_tx(uint8_t port,uint16_t vf, uint8_t on);
|
|
|
|
/**
|
|
* Enable or disable a VF traffic receive of an Ethernet device.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param vf
|
|
* VF id.
|
|
* @param on
|
|
* 1 - Enable a VF traffic receive.
|
|
* 0 - Disable a VF traffic receive.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int
|
|
rte_eth_dev_set_vf_rx(uint8_t port,uint16_t vf, uint8_t on);
|
|
|
|
/**
|
|
* Enable/Disable hardware VF VLAN filtering by an Ethernet device of
|
|
* received VLAN packets tagged with a given VLAN Tag Identifier.
|
|
*
|
|
* @param port id
|
|
* The port identifier of the Ethernet device.
|
|
* @param vlan_id
|
|
* The VLAN Tag Identifier whose filtering must be enabled or disabled.
|
|
* @param vf_mask
|
|
* Bitmap listing which VFs participate in the VLAN filtering.
|
|
* @param vlan_on
|
|
* 1 - Enable VFs VLAN filtering.
|
|
* 0 - Disable VFs VLAN filtering.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int
|
|
rte_eth_dev_set_vf_vlan_filter(uint8_t port, uint16_t vlan_id,
|
|
uint64_t vf_mask,
|
|
uint8_t vlan_on);
|
|
|
|
/**
|
|
* Set a traffic mirroring rule on an Ethernet device
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param mirror_conf
|
|
* The pointer to the traffic mirroring structure describing the mirroring rule.
|
|
* The *rte_eth_vm_mirror_conf* structure includes the type of mirroring rule,
|
|
* destination pool and the value of rule if enable vlan or pool mirroring.
|
|
*
|
|
* @param rule_id
|
|
* The index of traffic mirroring rule, we support four separated rules.
|
|
* @param on
|
|
* 1 - Enable a mirroring rule.
|
|
* 0 - Disable a mirroring rule.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support this feature.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
* - (-EINVAL) if the mr_conf information is not correct.
|
|
*/
|
|
int rte_eth_mirror_rule_set(uint8_t port_id,
|
|
struct rte_eth_mirror_conf *mirror_conf,
|
|
uint8_t rule_id,
|
|
uint8_t on);
|
|
|
|
/**
|
|
* Reset a traffic mirroring rule on an Ethernet device.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param rule_id
|
|
* The index of traffic mirroring rule, we support four separated rules.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support this feature.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_eth_mirror_rule_reset(uint8_t port_id,
|
|
uint8_t rule_id);
|
|
|
|
/**
|
|
* Set the rate limitation for a queue on an Ethernet device.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param queue_idx
|
|
* The queue id.
|
|
* @param tx_rate
|
|
* The tx rate in Mbps. Allocated from the total port link speed.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support this feature.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_eth_set_queue_rate_limit(uint8_t port_id, uint16_t queue_idx,
|
|
uint16_t tx_rate);
|
|
|
|
/**
|
|
* Set the rate limitation for a vf on an Ethernet device.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param vf
|
|
* VF id.
|
|
* @param tx_rate
|
|
* The tx rate allocated from the total link speed for this VF id.
|
|
* @param q_msk
|
|
* The queue mask which need to set the rate.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support this feature.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_eth_set_vf_rate_limit(uint8_t port_id, uint16_t vf,
|
|
uint16_t tx_rate, uint64_t q_msk);
|
|
|
|
/**
|
|
* Initialize bypass logic. This function needs to be called before
|
|
* executing any other bypass API.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_eth_dev_bypass_init(uint8_t port);
|
|
|
|
/**
|
|
* Return bypass state.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param state
|
|
* The return bypass state.
|
|
* - (1) Normal mode
|
|
* - (2) Bypass mode
|
|
* - (3) Isolate mode
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_eth_dev_bypass_state_show(uint8_t port, uint32_t *state);
|
|
|
|
/**
|
|
* Set bypass state
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param new_state
|
|
* The current bypass state.
|
|
* - (1) Normal mode
|
|
* - (2) Bypass mode
|
|
* - (3) Isolate mode
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_eth_dev_bypass_state_set(uint8_t port, uint32_t *new_state);
|
|
|
|
/**
|
|
* Return bypass state when given event occurs.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param event
|
|
* The bypass event
|
|
* - (1) Main power on (power button is pushed)
|
|
* - (2) Auxiliary power on (power supply is being plugged)
|
|
* - (3) Main power off (system shutdown and power supply is left plugged in)
|
|
* - (4) Auxiliary power off (power supply is being unplugged)
|
|
* - (5) Display or set the watchdog timer
|
|
* @param state
|
|
* The bypass state when given event occurred.
|
|
* - (1) Normal mode
|
|
* - (2) Bypass mode
|
|
* - (3) Isolate mode
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_eth_dev_bypass_event_show(uint8_t port, uint32_t event, uint32_t *state);
|
|
|
|
/**
|
|
* Set bypass state when given event occurs.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param event
|
|
* The bypass event
|
|
* - (1) Main power on (power button is pushed)
|
|
* - (2) Auxiliary power on (power supply is being plugged)
|
|
* - (3) Main power off (system shutdown and power supply is left plugged in)
|
|
* - (4) Auxiliary power off (power supply is being unplugged)
|
|
* - (5) Display or set the watchdog timer
|
|
* @param state
|
|
* The assigned state when given event occurs.
|
|
* - (1) Normal mode
|
|
* - (2) Bypass mode
|
|
* - (3) Isolate mode
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_eth_dev_bypass_event_store(uint8_t port, uint32_t event, uint32_t state);
|
|
|
|
/**
|
|
* Set bypass watchdog timeout count.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param timeout
|
|
* The timeout to be set.
|
|
* - (0) 0 seconds (timer is off)
|
|
* - (1) 1.5 seconds
|
|
* - (2) 2 seconds
|
|
* - (3) 3 seconds
|
|
* - (4) 4 seconds
|
|
* - (5) 8 seconds
|
|
* - (6) 16 seconds
|
|
* - (7) 32 seconds
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_eth_dev_wd_timeout_store(uint8_t port, uint32_t timeout);
|
|
|
|
/**
|
|
* Get bypass firmware version.
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param ver
|
|
* The firmware version
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_eth_dev_bypass_ver_show(uint8_t port, uint32_t *ver);
|
|
|
|
/**
|
|
* Return bypass watchdog timeout in seconds
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @param wd_timeout
|
|
* The return watchdog timeout. "0" represents timer expired
|
|
* - (0) 0 seconds (timer is off)
|
|
* - (1) 1.5 seconds
|
|
* - (2) 2 seconds
|
|
* - (3) 3 seconds
|
|
* - (4) 4 seconds
|
|
* - (5) 8 seconds
|
|
* - (6) 16 seconds
|
|
* - (7) 32 seconds
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_eth_dev_bypass_wd_timeout_show(uint8_t port, uint32_t *wd_timeout);
|
|
|
|
/**
|
|
* Reset bypass watchdog timer
|
|
*
|
|
* @param port
|
|
* The port identifier of the Ethernet device.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_eth_dev_bypass_wd_reset(uint8_t port);
|
|
|
|
/**
|
|
* Configuration of Receive Side Scaling hash computation of Ethernet device.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param rss_conf
|
|
* The new configuration to use for RSS hash computation on the port.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if port identifier is invalid.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-EINVAL) if bad parameter.
|
|
*/
|
|
int rte_eth_dev_rss_hash_update(uint8_t port_id,
|
|
struct rte_eth_rss_conf *rss_conf);
|
|
|
|
/**
|
|
* Retrieve current configuration of Receive Side Scaling hash computation
|
|
* of Ethernet device.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param rss_conf
|
|
* Where to store the current RSS hash configuration of the Ethernet device.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if port identifier is invalid.
|
|
* - (-ENOTSUP) if hardware doesn't support RSS.
|
|
*/
|
|
int
|
|
rte_eth_dev_rss_hash_conf_get(uint8_t port_id,
|
|
struct rte_eth_rss_conf *rss_conf);
|
|
|
|
/**
|
|
* Add UDP tunneling port of an Ethernet device for filtering a specific
|
|
* tunneling packet by UDP port number.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param tunnel_udp
|
|
* UDP tunneling configuration.
|
|
*
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if port identifier is invalid.
|
|
* - (-ENOTSUP) if hardware doesn't support tunnel type.
|
|
*/
|
|
int
|
|
rte_eth_dev_udp_tunnel_add(uint8_t port_id,
|
|
struct rte_eth_udp_tunnel *tunnel_udp);
|
|
|
|
/**
|
|
* Detete UDP tunneling port configuration of Ethernet device
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param tunnel_udp
|
|
* UDP tunneling configuration.
|
|
*
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if port identifier is invalid.
|
|
* - (-ENOTSUP) if hardware doesn't support tunnel type.
|
|
*/
|
|
int
|
|
rte_eth_dev_udp_tunnel_delete(uint8_t port_id,
|
|
struct rte_eth_udp_tunnel *tunnel_udp);
|
|
|
|
/**
|
|
* Check whether the filter type is supported on an Ethernet device.
|
|
* All the supported filter types are defined in 'rte_eth_ctrl.h'.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param filter_type
|
|
* Filter type.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support this filter type.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
*/
|
|
int rte_eth_dev_filter_supported(uint8_t port_id, enum rte_filter_type filter_type);
|
|
|
|
/**
|
|
* Take operations to assigned filter type on an Ethernet device.
|
|
* All the supported operations and filter types are defined in 'rte_eth_ctrl.h'.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param filter_type
|
|
* Filter type.
|
|
* @param filter_op
|
|
* Type of operation.
|
|
* @param arg
|
|
* A pointer to arguments defined specifically for the operation.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
* - others depends on the specific operations implementation.
|
|
*/
|
|
int rte_eth_dev_filter_ctrl(uint8_t port_id, enum rte_filter_type filter_type,
|
|
enum rte_filter_op filter_op, void *arg);
|
|
|
|
/**
|
|
* Get DCB information on an Ethernet device.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param dcb_info
|
|
* dcb information.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if port identifier is invalid.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
*/
|
|
int rte_eth_dev_get_dcb_info(uint8_t port_id,
|
|
struct rte_eth_dcb_info *dcb_info);
|
|
|
|
/**
|
|
* Add a callback to be called on packet RX on a given port and queue.
|
|
*
|
|
* This API configures a function to be called for each burst of
|
|
* packets received on a given NIC port queue. The return value is a pointer
|
|
* that can be used to later remove the callback using
|
|
* rte_eth_remove_rx_callback().
|
|
*
|
|
* Multiple functions are called in the order that they are added.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param queue_id
|
|
* The queue on the Ethernet device on which the callback is to be added.
|
|
* @param fn
|
|
* The callback function
|
|
* @param user_param
|
|
* A generic pointer parameter which will be passed to each invocation of the
|
|
* callback function on this port and queue.
|
|
*
|
|
* @return
|
|
* NULL on error.
|
|
* On success, a pointer value which can later be used to remove the callback.
|
|
*/
|
|
void *rte_eth_add_rx_callback(uint8_t port_id, uint16_t queue_id,
|
|
rte_rx_callback_fn fn, void *user_param);
|
|
|
|
/**
|
|
* Add a callback to be called on packet TX on a given port and queue.
|
|
*
|
|
* This API configures a function to be called for each burst of
|
|
* packets sent on a given NIC port queue. The return value is a pointer
|
|
* that can be used to later remove the callback using
|
|
* rte_eth_remove_tx_callback().
|
|
*
|
|
* Multiple functions are called in the order that they are added.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param queue_id
|
|
* The queue on the Ethernet device on which the callback is to be added.
|
|
* @param fn
|
|
* The callback function
|
|
* @param user_param
|
|
* A generic pointer parameter which will be passed to each invocation of the
|
|
* callback function on this port and queue.
|
|
*
|
|
* @return
|
|
* NULL on error.
|
|
* On success, a pointer value which can later be used to remove the callback.
|
|
*/
|
|
void *rte_eth_add_tx_callback(uint8_t port_id, uint16_t queue_id,
|
|
rte_tx_callback_fn fn, void *user_param);
|
|
|
|
/**
|
|
* Remove an RX packet callback from a given port and queue.
|
|
*
|
|
* This function is used to removed callbacks that were added to a NIC port
|
|
* queue using rte_eth_add_rx_callback().
|
|
*
|
|
* Note: the callback is removed from the callback list but it isn't freed
|
|
* since the it may still be in use. The memory for the callback can be
|
|
* subsequently freed back by the application by calling rte_free():
|
|
*
|
|
* - Immediately - if the port is stopped, or the user knows that no
|
|
* callbacks are in flight e.g. if called from the thread doing RX/TX
|
|
* on that queue.
|
|
*
|
|
* - After a short delay - where the delay is sufficient to allow any
|
|
* in-flight callbacks to complete.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param queue_id
|
|
* The queue on the Ethernet device from which the callback is to be removed.
|
|
* @param user_cb
|
|
* User supplied callback created via rte_eth_add_rx_callback().
|
|
*
|
|
* @return
|
|
* - 0: Success. Callback was removed.
|
|
* - -ENOTSUP: Callback support is not available.
|
|
* - -EINVAL: The port_id or the queue_id is out of range, or the callback
|
|
* is NULL or not found for the port/queue.
|
|
*/
|
|
int rte_eth_remove_rx_callback(uint8_t port_id, uint16_t queue_id,
|
|
struct rte_eth_rxtx_callback *user_cb);
|
|
|
|
/**
|
|
* Remove a TX packet callback from a given port and queue.
|
|
*
|
|
* This function is used to removed callbacks that were added to a NIC port
|
|
* queue using rte_eth_add_tx_callback().
|
|
*
|
|
* Note: the callback is removed from the callback list but it isn't freed
|
|
* since the it may still be in use. The memory for the callback can be
|
|
* subsequently freed back by the application by calling rte_free():
|
|
*
|
|
* - Immediately - if the port is stopped, or the user knows that no
|
|
* callbacks are in flight e.g. if called from the thread doing RX/TX
|
|
* on that queue.
|
|
*
|
|
* - After a short delay - where the delay is sufficient to allow any
|
|
* in-flight callbacks to complete.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param queue_id
|
|
* The queue on the Ethernet device from which the callback is to be removed.
|
|
* @param user_cb
|
|
* User supplied callback created via rte_eth_add_tx_callback().
|
|
*
|
|
* @return
|
|
* - 0: Success. Callback was removed.
|
|
* - -ENOTSUP: Callback support is not available.
|
|
* - -EINVAL: The port_id or the queue_id is out of range, or the callback
|
|
* is NULL or not found for the port/queue.
|
|
*/
|
|
int rte_eth_remove_tx_callback(uint8_t port_id, uint16_t queue_id,
|
|
struct rte_eth_rxtx_callback *user_cb);
|
|
|
|
/**
|
|
* Retrieve information about given port's RX queue.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param queue_id
|
|
* The RX queue on the Ethernet device for which information
|
|
* will be retrieved.
|
|
* @param qinfo
|
|
* A pointer to a structure of type *rte_eth_rxq_info_info* to be filled with
|
|
* the information of the Ethernet device.
|
|
*
|
|
* @return
|
|
* - 0: Success
|
|
* - -ENOTSUP: routine is not supported by the device PMD.
|
|
* - -EINVAL: The port_id or the queue_id is out of range.
|
|
*/
|
|
int rte_eth_rx_queue_info_get(uint8_t port_id, uint16_t queue_id,
|
|
struct rte_eth_rxq_info *qinfo);
|
|
|
|
/**
|
|
* Retrieve information about given port's TX queue.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param queue_id
|
|
* The TX queue on the Ethernet device for which information
|
|
* will be retrieved.
|
|
* @param qinfo
|
|
* A pointer to a structure of type *rte_eth_txq_info_info* to be filled with
|
|
* the information of the Ethernet device.
|
|
*
|
|
* @return
|
|
* - 0: Success
|
|
* - -ENOTSUP: routine is not supported by the device PMD.
|
|
* - -EINVAL: The port_id or the queue_id is out of range.
|
|
*/
|
|
int rte_eth_tx_queue_info_get(uint8_t port_id, uint16_t queue_id,
|
|
struct rte_eth_txq_info *qinfo);
|
|
|
|
/*
|
|
* Retrieve number of available registers for access
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @return
|
|
* - (>=0) number of registers if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
* - others depends on the specific operations implementation.
|
|
*/
|
|
int rte_eth_dev_get_reg_length(uint8_t port_id);
|
|
|
|
/**
|
|
* Retrieve device registers and register attributes
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param info
|
|
* The template includes buffer for register data and attribute to be filled.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
* - others depends on the specific operations implementation.
|
|
*/
|
|
int rte_eth_dev_get_reg_info(uint8_t port_id, struct rte_dev_reg_info *info);
|
|
|
|
/**
|
|
* Retrieve size of device EEPROM
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @return
|
|
* - (>=0) EEPROM size if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
* - others depends on the specific operations implementation.
|
|
*/
|
|
int rte_eth_dev_get_eeprom_length(uint8_t port_id);
|
|
|
|
/**
|
|
* Retrieve EEPROM and EEPROM attribute
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param info
|
|
* The template includes buffer for return EEPROM data and
|
|
* EEPROM attributes to be filled.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
* - others depends on the specific operations implementation.
|
|
*/
|
|
int rte_eth_dev_get_eeprom(uint8_t port_id, struct rte_dev_eeprom_info *info);
|
|
|
|
/**
|
|
* Program EEPROM with provided data
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param info
|
|
* The template includes EEPROM data for programming and
|
|
* EEPROM attributes to be filled
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENOTSUP) if hardware doesn't support.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
* - others depends on the specific operations implementation.
|
|
*/
|
|
int rte_eth_dev_set_eeprom(uint8_t port_id, struct rte_dev_eeprom_info *info);
|
|
|
|
/**
|
|
* Set the list of multicast addresses to filter on an Ethernet device.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param mc_addr_set
|
|
* The array of multicast addresses to set. Equal to NULL when the function
|
|
* is invoked to flush the set of filtered addresses.
|
|
* @param nb_mc_addr
|
|
* The number of multicast addresses in the *mc_addr_set* array. Equal to 0
|
|
* when the function is invoked to flush the set of filtered addresses.
|
|
* @return
|
|
* - (0) if successful.
|
|
* - (-ENODEV) if *port_id* invalid.
|
|
* - (-ENOTSUP) if PMD of *port_id* doesn't support multicast filtering.
|
|
* - (-ENOSPC) if *port_id* has not enough multicast filtering resources.
|
|
*/
|
|
int rte_eth_dev_set_mc_addr_list(uint8_t port_id,
|
|
struct ether_addr *mc_addr_set,
|
|
uint32_t nb_mc_addr);
|
|
|
|
/**
|
|
* Enable IEEE1588/802.1AS timestamping for an Ethernet device.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
*
|
|
* @return
|
|
* - 0: Success.
|
|
* - -ENODEV: The port ID is invalid.
|
|
* - -ENOTSUP: The function is not supported by the Ethernet driver.
|
|
*/
|
|
int rte_eth_timesync_enable(uint8_t port_id);
|
|
|
|
/**
|
|
* Disable IEEE1588/802.1AS timestamping for an Ethernet device.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
*
|
|
* @return
|
|
* - 0: Success.
|
|
* - -ENODEV: The port ID is invalid.
|
|
* - -ENOTSUP: The function is not supported by the Ethernet driver.
|
|
*/
|
|
int rte_eth_timesync_disable(uint8_t port_id);
|
|
|
|
/**
|
|
* Read an IEEE1588/802.1AS RX timestamp from an Ethernet device.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param timestamp
|
|
* Pointer to the timestamp struct.
|
|
* @param flags
|
|
* Device specific flags. Used to pass the RX timesync register index to
|
|
* i40e. Unused in igb/ixgbe, pass 0 instead.
|
|
*
|
|
* @return
|
|
* - 0: Success.
|
|
* - -EINVAL: No timestamp is available.
|
|
* - -ENODEV: The port ID is invalid.
|
|
* - -ENOTSUP: The function is not supported by the Ethernet driver.
|
|
*/
|
|
int rte_eth_timesync_read_rx_timestamp(uint8_t port_id,
|
|
struct timespec *timestamp, uint32_t flags);
|
|
|
|
/**
|
|
* Read an IEEE1588/802.1AS TX timestamp from an Ethernet device.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param timestamp
|
|
* Pointer to the timestamp struct.
|
|
*
|
|
* @return
|
|
* - 0: Success.
|
|
* - -EINVAL: No timestamp is available.
|
|
* - -ENODEV: The port ID is invalid.
|
|
* - -ENOTSUP: The function is not supported by the Ethernet driver.
|
|
*/
|
|
int rte_eth_timesync_read_tx_timestamp(uint8_t port_id,
|
|
struct timespec *timestamp);
|
|
|
|
/**
|
|
* Adjust the timesync clock on an Ethernet device.
|
|
*
|
|
* This is usually used in conjunction with other Ethdev timesync functions to
|
|
* synchronize the device time using the IEEE1588/802.1AS protocol.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param delta
|
|
* The adjustment in nanoseconds.
|
|
*
|
|
* @return
|
|
* - 0: Success.
|
|
* - -ENODEV: The port ID is invalid.
|
|
* - -ENOTSUP: The function is not supported by the Ethernet driver.
|
|
*/
|
|
int rte_eth_timesync_adjust_time(uint8_t port_id, int64_t delta);
|
|
|
|
/**
|
|
* Read the time from the timesync clock on an Ethernet device.
|
|
*
|
|
* This is usually used in conjunction with other Ethdev timesync functions to
|
|
* synchronize the device time using the IEEE1588/802.1AS protocol.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param time
|
|
* Pointer to the timespec struct that holds the time.
|
|
*
|
|
* @return
|
|
* - 0: Success.
|
|
*/
|
|
int rte_eth_timesync_read_time(uint8_t port_id, struct timespec *time);
|
|
|
|
/**
|
|
* Set the time of the timesync clock on an Ethernet device.
|
|
*
|
|
* This is usually used in conjunction with other Ethdev timesync functions to
|
|
* synchronize the device time using the IEEE1588/802.1AS protocol.
|
|
*
|
|
* @param port_id
|
|
* The port identifier of the Ethernet device.
|
|
* @param time
|
|
* Pointer to the timespec struct that holds the time.
|
|
*
|
|
* @return
|
|
* - 0: Success.
|
|
* - -EINVAL: No timestamp is available.
|
|
* - -ENODEV: The port ID is invalid.
|
|
* - -ENOTSUP: The function is not supported by the Ethernet driver.
|
|
*/
|
|
int rte_eth_timesync_write_time(uint8_t port_id, const struct timespec *time);
|
|
|
|
/**
|
|
* Copy pci device info to the Ethernet device data.
|
|
*
|
|
* @param eth_dev
|
|
* The *eth_dev* pointer is the address of the *rte_eth_dev* structure.
|
|
* @param pci_dev
|
|
* The *pci_dev* pointer is the address of the *rte_pci_device* structure.
|
|
*
|
|
* @return
|
|
* - 0 on success, negative on error
|
|
*/
|
|
void rte_eth_copy_pci_info(struct rte_eth_dev *eth_dev,
|
|
struct rte_pci_device *pci_dev);
|
|
|
|
/**
|
|
* Create memzone for HW rings.
|
|
* malloc can't be used as the physical address is needed.
|
|
* If the memzone is already created, then this function returns a ptr
|
|
* to the old one.
|
|
*
|
|
* @param eth_dev
|
|
* The *eth_dev* pointer is the address of the *rte_eth_dev* structure
|
|
* @param name
|
|
* The name of the memory zone
|
|
* @param queue_id
|
|
* The index of the queue to add to name
|
|
* @param size
|
|
* The sizeof of the memory area
|
|
* @param align
|
|
* Alignment for resulting memzone. Must be a power of 2.
|
|
* @param socket_id
|
|
* The *socket_id* argument is the socket identifier in case of NUMA.
|
|
*/
|
|
const struct rte_memzone *
|
|
rte_eth_dma_zone_reserve(const struct rte_eth_dev *eth_dev, const char *name,
|
|
uint16_t queue_id, size_t size,
|
|
unsigned align, int socket_id);
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* _RTE_ETHDEV_H_ */
|