numam-dpdk/lib/ipsec/esp_inb.c
Bruce Richardson 99a2dd955f lib: remove librte_ prefix from directory names
There is no reason for the DPDK libraries to all have 'librte_' prefix on
the directory names. This prefix makes the directory names longer and also
makes it awkward to add features referring to individual libraries in the
build - should the lib names be specified with or without the prefix.
Therefore, we can just remove the library prefix and use the library's
unique name as the directory name, i.e. 'eal' rather than 'librte_eal'

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
2021-04-21 14:04:09 +02:00

783 lines
19 KiB
C

/* SPDX-License-Identifier: BSD-3-Clause
* Copyright(c) 2018-2020 Intel Corporation
*/
#include <rte_ipsec.h>
#include <rte_esp.h>
#include <rte_ip.h>
#include <rte_errno.h>
#include <rte_cryptodev.h>
#include "sa.h"
#include "ipsec_sqn.h"
#include "crypto.h"
#include "iph.h"
#include "misc.h"
#include "pad.h"
typedef uint16_t (*esp_inb_process_t)(const struct rte_ipsec_sa *sa,
struct rte_mbuf *mb[], uint32_t sqn[], uint32_t dr[], uint16_t num,
uint8_t sqh_len);
/*
* helper function to fill crypto_sym op for cipher+auth algorithms.
* used by inb_cop_prepare(), see below.
*/
static inline void
sop_ciph_auth_prepare(struct rte_crypto_sym_op *sop,
const struct rte_ipsec_sa *sa, const union sym_op_data *icv,
uint32_t pofs, uint32_t plen)
{
sop->cipher.data.offset = pofs + sa->ctp.cipher.offset;
sop->cipher.data.length = plen - sa->ctp.cipher.length;
sop->auth.data.offset = pofs + sa->ctp.auth.offset;
sop->auth.data.length = plen - sa->ctp.auth.length;
sop->auth.digest.data = icv->va;
sop->auth.digest.phys_addr = icv->pa;
}
/*
* helper function to fill crypto_sym op for aead algorithms
* used by inb_cop_prepare(), see below.
*/
static inline void
sop_aead_prepare(struct rte_crypto_sym_op *sop,
const struct rte_ipsec_sa *sa, const union sym_op_data *icv,
uint32_t pofs, uint32_t plen)
{
sop->aead.data.offset = pofs + sa->ctp.cipher.offset;
sop->aead.data.length = plen - sa->ctp.cipher.length;
sop->aead.digest.data = icv->va;
sop->aead.digest.phys_addr = icv->pa;
sop->aead.aad.data = icv->va + sa->icv_len;
sop->aead.aad.phys_addr = icv->pa + sa->icv_len;
}
/*
* setup crypto op and crypto sym op for ESP inbound packet.
*/
static inline void
inb_cop_prepare(struct rte_crypto_op *cop,
const struct rte_ipsec_sa *sa, struct rte_mbuf *mb,
const union sym_op_data *icv, uint32_t pofs, uint32_t plen)
{
struct rte_crypto_sym_op *sop;
struct aead_gcm_iv *gcm;
struct aesctr_cnt_blk *ctr;
uint64_t *ivc, *ivp;
uint32_t algo;
algo = sa->algo_type;
ivp = rte_pktmbuf_mtod_offset(mb, uint64_t *,
pofs + sizeof(struct rte_esp_hdr));
/* fill sym op fields */
sop = cop->sym;
switch (algo) {
case ALGO_TYPE_AES_GCM:
sop_aead_prepare(sop, sa, icv, pofs, plen);
/* fill AAD IV (located inside crypto op) */
gcm = rte_crypto_op_ctod_offset(cop, struct aead_gcm_iv *,
sa->iv_ofs);
aead_gcm_iv_fill(gcm, ivp[0], sa->salt);
break;
case ALGO_TYPE_AES_CBC:
case ALGO_TYPE_3DES_CBC:
sop_ciph_auth_prepare(sop, sa, icv, pofs, plen);
/* copy iv from the input packet to the cop */
ivc = rte_crypto_op_ctod_offset(cop, uint64_t *, sa->iv_ofs);
copy_iv(ivc, ivp, sa->iv_len);
break;
case ALGO_TYPE_AES_CTR:
sop_ciph_auth_prepare(sop, sa, icv, pofs, plen);
/* fill CTR block (located inside crypto op) */
ctr = rte_crypto_op_ctod_offset(cop, struct aesctr_cnt_blk *,
sa->iv_ofs);
aes_ctr_cnt_blk_fill(ctr, ivp[0], sa->salt);
break;
case ALGO_TYPE_NULL:
sop_ciph_auth_prepare(sop, sa, icv, pofs, plen);
break;
}
}
static inline uint32_t
inb_cpu_crypto_prepare(const struct rte_ipsec_sa *sa, struct rte_mbuf *mb,
uint32_t *pofs, uint32_t plen, void *iv)
{
struct aead_gcm_iv *gcm;
struct aesctr_cnt_blk *ctr;
uint64_t *ivp;
uint32_t clen;
ivp = rte_pktmbuf_mtod_offset(mb, uint64_t *,
*pofs + sizeof(struct rte_esp_hdr));
clen = 0;
switch (sa->algo_type) {
case ALGO_TYPE_AES_GCM:
gcm = (struct aead_gcm_iv *)iv;
aead_gcm_iv_fill(gcm, ivp[0], sa->salt);
break;
case ALGO_TYPE_AES_CBC:
case ALGO_TYPE_3DES_CBC:
copy_iv(iv, ivp, sa->iv_len);
break;
case ALGO_TYPE_AES_CTR:
ctr = (struct aesctr_cnt_blk *)iv;
aes_ctr_cnt_blk_fill(ctr, ivp[0], sa->salt);
break;
}
*pofs += sa->ctp.auth.offset;
clen = plen - sa->ctp.auth.length;
return clen;
}
/*
* Helper function for prepare() to deal with situation when
* ICV is spread by two segments. Tries to move ICV completely into the
* last segment.
*/
static struct rte_mbuf *
move_icv(struct rte_mbuf *ml, uint32_t ofs)
{
uint32_t n;
struct rte_mbuf *ms;
const void *prev;
void *new;
ms = ml->next;
n = ml->data_len - ofs;
prev = rte_pktmbuf_mtod_offset(ml, const void *, ofs);
new = rte_pktmbuf_prepend(ms, n);
if (new == NULL)
return NULL;
/* move n ICV bytes from ml into ms */
rte_memcpy(new, prev, n);
ml->data_len -= n;
return ms;
}
/*
* for pure cryptodev (lookaside none) depending on SA settings,
* we might have to write some extra data to the packet.
*/
static inline void
inb_pkt_xprepare(const struct rte_ipsec_sa *sa, rte_be64_t sqc,
const union sym_op_data *icv)
{
struct aead_gcm_aad *aad;
/* insert SQN.hi between ESP trailer and ICV */
if (sa->sqh_len != 0)
insert_sqh(sqn_hi32(sqc), icv->va, sa->icv_len);
/*
* fill AAD fields, if any (aad fields are placed after icv),
* right now we support only one AEAD algorithm: AES-GCM.
*/
if (sa->aad_len != 0) {
aad = (struct aead_gcm_aad *)(icv->va + sa->icv_len);
aead_gcm_aad_fill(aad, sa->spi, sqc, IS_ESN(sa));
}
}
static inline int
inb_get_sqn(const struct rte_ipsec_sa *sa, const struct replay_sqn *rsn,
struct rte_mbuf *mb, uint32_t hlen, rte_be64_t *sqc)
{
int32_t rc;
uint64_t sqn;
struct rte_esp_hdr *esph;
esph = rte_pktmbuf_mtod_offset(mb, struct rte_esp_hdr *, hlen);
/*
* retrieve and reconstruct SQN, then check it, then
* convert it back into network byte order.
*/
sqn = rte_be_to_cpu_32(esph->seq);
if (IS_ESN(sa))
sqn = reconstruct_esn(rsn->sqn, sqn, sa->replay.win_sz);
*sqc = rte_cpu_to_be_64(sqn);
/* check IPsec window */
rc = esn_inb_check_sqn(rsn, sa, sqn);
return rc;
}
/* prepare packet for upcoming processing */
static inline int32_t
inb_prepare(const struct rte_ipsec_sa *sa, struct rte_mbuf *mb,
uint32_t hlen, union sym_op_data *icv)
{
uint32_t clen, icv_len, icv_ofs, plen;
struct rte_mbuf *ml;
/* start packet manipulation */
plen = mb->pkt_len;
plen = plen - hlen;
/* check that packet has a valid length */
clen = plen - sa->ctp.cipher.length;
if ((int32_t)clen < 0 || (clen & (sa->pad_align - 1)) != 0)
return -EBADMSG;
/* find ICV location */
icv_len = sa->icv_len;
icv_ofs = mb->pkt_len - icv_len;
ml = mbuf_get_seg_ofs(mb, &icv_ofs);
/*
* if ICV is spread by two segments, then try to
* move ICV completely into the last segment.
*/
if (ml->data_len < icv_ofs + icv_len) {
ml = move_icv(ml, icv_ofs);
if (ml == NULL)
return -ENOSPC;
/* new ICV location */
icv_ofs = 0;
}
icv_ofs += sa->sqh_len;
/*
* we have to allocate space for AAD somewhere,
* right now - just use free trailing space at the last segment.
* Would probably be more convenient to reserve space for AAD
* inside rte_crypto_op itself
* (again for IV space is already reserved inside cop).
*/
if (sa->aad_len + sa->sqh_len > rte_pktmbuf_tailroom(ml))
return -ENOSPC;
icv->va = rte_pktmbuf_mtod_offset(ml, void *, icv_ofs);
icv->pa = rte_pktmbuf_iova_offset(ml, icv_ofs);
/*
* if esn is used then high-order 32 bits are also used in ICV
* calculation but are not transmitted, update packet length
* to be consistent with auth data length and offset, this will
* be subtracted from packet length in post crypto processing
*/
mb->pkt_len += sa->sqh_len;
ml->data_len += sa->sqh_len;
return plen;
}
static inline int32_t
inb_pkt_prepare(const struct rte_ipsec_sa *sa, const struct replay_sqn *rsn,
struct rte_mbuf *mb, uint32_t hlen, union sym_op_data *icv)
{
int rc;
rte_be64_t sqn;
rc = inb_get_sqn(sa, rsn, mb, hlen, &sqn);
if (rc != 0)
return rc;
rc = inb_prepare(sa, mb, hlen, icv);
if (rc < 0)
return rc;
inb_pkt_xprepare(sa, sqn, icv);
return rc;
}
/*
* setup/update packets and crypto ops for ESP inbound case.
*/
uint16_t
esp_inb_pkt_prepare(const struct rte_ipsec_session *ss, struct rte_mbuf *mb[],
struct rte_crypto_op *cop[], uint16_t num)
{
int32_t rc;
uint32_t i, k, hl;
struct rte_ipsec_sa *sa;
struct rte_cryptodev_sym_session *cs;
struct replay_sqn *rsn;
union sym_op_data icv;
uint32_t dr[num];
sa = ss->sa;
cs = ss->crypto.ses;
rsn = rsn_acquire(sa);
k = 0;
for (i = 0; i != num; i++) {
hl = mb[i]->l2_len + mb[i]->l3_len;
rc = inb_pkt_prepare(sa, rsn, mb[i], hl, &icv);
if (rc >= 0) {
lksd_none_cop_prepare(cop[k], cs, mb[i]);
inb_cop_prepare(cop[k], sa, mb[i], &icv, hl, rc);
k++;
} else {
dr[i - k] = i;
rte_errno = -rc;
}
}
rsn_release(sa, rsn);
/* copy not prepared mbufs beyond good ones */
if (k != num && k != 0)
move_bad_mbufs(mb, dr, num, num - k);
return k;
}
/*
* Start with processing inbound packet.
* This is common part for both tunnel and transport mode.
* Extract information that will be needed later from mbuf metadata and
* actual packet data:
* - mbuf for packet's last segment
* - length of the L2/L3 headers
* - esp tail structure
*/
static inline void
process_step1(struct rte_mbuf *mb, uint32_t tlen, struct rte_mbuf **ml,
struct rte_esp_tail *espt, uint32_t *hlen, uint32_t *tofs)
{
const struct rte_esp_tail *pt;
uint32_t ofs;
ofs = mb->pkt_len - tlen;
hlen[0] = mb->l2_len + mb->l3_len;
ml[0] = mbuf_get_seg_ofs(mb, &ofs);
pt = rte_pktmbuf_mtod_offset(ml[0], const struct rte_esp_tail *, ofs);
tofs[0] = ofs;
espt[0] = pt[0];
}
/*
* Helper function to check pad bytes values.
* Note that pad bytes can be spread across multiple segments.
*/
static inline int
check_pad_bytes(struct rte_mbuf *mb, uint32_t ofs, uint32_t len)
{
const uint8_t *pd;
uint32_t k, n;
for (n = 0; n != len; n += k, mb = mb->next) {
k = mb->data_len - ofs;
k = RTE_MIN(k, len - n);
pd = rte_pktmbuf_mtod_offset(mb, const uint8_t *, ofs);
if (memcmp(pd, esp_pad_bytes + n, k) != 0)
break;
ofs = 0;
}
return len - n;
}
/*
* packet checks for transport mode:
* - no reported IPsec related failures in ol_flags
* - tail and header lengths are valid
* - padding bytes are valid
* apart from checks, function also updates tail offset (and segment)
* by taking into account pad length.
*/
static inline int32_t
trs_process_check(struct rte_mbuf *mb, struct rte_mbuf **ml,
uint32_t *tofs, struct rte_esp_tail espt, uint32_t hlen, uint32_t tlen)
{
if ((mb->ol_flags & PKT_RX_SEC_OFFLOAD_FAILED) != 0 ||
tlen + hlen > mb->pkt_len)
return -EBADMSG;
/* padding bytes are spread over multiple segments */
if (tofs[0] < espt.pad_len) {
tofs[0] = mb->pkt_len - tlen;
ml[0] = mbuf_get_seg_ofs(mb, tofs);
} else
tofs[0] -= espt.pad_len;
return check_pad_bytes(ml[0], tofs[0], espt.pad_len);
}
/*
* packet checks for tunnel mode:
* - same as for trasnport mode
* - esp tail next proto contains expected for that SA value
*/
static inline int32_t
tun_process_check(struct rte_mbuf *mb, struct rte_mbuf **ml,
uint32_t *tofs, struct rte_esp_tail espt, uint32_t hlen, uint32_t tlen,
uint8_t proto)
{
return (trs_process_check(mb, ml, tofs, espt, hlen, tlen) ||
espt.next_proto != proto);
}
/*
* step two for tunnel mode:
* - read SQN value (for future use)
* - cut of ICV, ESP tail and padding bytes
* - cut of ESP header and IV, also if needed - L2/L3 headers
* (controlled by *adj* value)
*/
static inline void *
tun_process_step2(struct rte_mbuf *mb, struct rte_mbuf *ml, uint32_t hlen,
uint32_t adj, uint32_t tofs, uint32_t tlen, uint32_t *sqn)
{
const struct rte_esp_hdr *ph;
/* read SQN value */
ph = rte_pktmbuf_mtod_offset(mb, const struct rte_esp_hdr *, hlen);
sqn[0] = ph->seq;
/* cut of ICV, ESP tail and padding bytes */
mbuf_cut_seg_ofs(mb, ml, tofs, tlen);
/* cut of L2/L3 headers, ESP header and IV */
return rte_pktmbuf_adj(mb, adj);
}
/*
* step two for transport mode:
* - read SQN value (for future use)
* - cut of ICV, ESP tail and padding bytes
* - cut of ESP header and IV
* - move L2/L3 header to fill the gap after ESP header removal
*/
static inline void *
trs_process_step2(struct rte_mbuf *mb, struct rte_mbuf *ml, uint32_t hlen,
uint32_t adj, uint32_t tofs, uint32_t tlen, uint32_t *sqn)
{
char *np, *op;
/* get start of the packet before modifications */
op = rte_pktmbuf_mtod(mb, char *);
/* cut off ESP header and IV */
np = tun_process_step2(mb, ml, hlen, adj, tofs, tlen, sqn);
/* move header bytes to fill the gap after ESP header removal */
remove_esph(np, op, hlen);
return np;
}
/*
* step three for transport mode:
* update mbuf metadata:
* - packet_type
* - ol_flags
*/
static inline void
trs_process_step3(struct rte_mbuf *mb)
{
/* reset mbuf packet type */
mb->packet_type &= (RTE_PTYPE_L2_MASK | RTE_PTYPE_L3_MASK);
/* clear the PKT_RX_SEC_OFFLOAD flag if set */
mb->ol_flags &= ~PKT_RX_SEC_OFFLOAD;
}
/*
* step three for tunnel mode:
* update mbuf metadata:
* - packet_type
* - ol_flags
* - tx_offload
*/
static inline void
tun_process_step3(struct rte_mbuf *mb, uint64_t txof_msk, uint64_t txof_val)
{
/* reset mbuf metatdata: L2/L3 len, packet type */
mb->packet_type = RTE_PTYPE_UNKNOWN;
mb->tx_offload = (mb->tx_offload & txof_msk) | txof_val;
/* clear the PKT_RX_SEC_OFFLOAD flag if set */
mb->ol_flags &= ~PKT_RX_SEC_OFFLOAD;
}
/*
* *process* function for tunnel packets
*/
static inline uint16_t
tun_process(const struct rte_ipsec_sa *sa, struct rte_mbuf *mb[],
uint32_t sqn[], uint32_t dr[], uint16_t num, uint8_t sqh_len)
{
uint32_t adj, i, k, tl;
uint32_t hl[num], to[num];
struct rte_esp_tail espt[num];
struct rte_mbuf *ml[num];
const void *outh;
void *inh;
/*
* remove icv, esp trailer and high-order
* 32 bits of esn from packet length
*/
const uint32_t tlen = sa->icv_len + sizeof(espt[0]) + sqh_len;
const uint32_t cofs = sa->ctp.cipher.offset;
/*
* to minimize stalls due to load latency,
* read mbufs metadata and esp tail first.
*/
for (i = 0; i != num; i++)
process_step1(mb[i], tlen, &ml[i], &espt[i], &hl[i], &to[i]);
k = 0;
for (i = 0; i != num; i++) {
adj = hl[i] + cofs;
tl = tlen + espt[i].pad_len;
/* check that packet is valid */
if (tun_process_check(mb[i], &ml[i], &to[i], espt[i], adj, tl,
sa->proto) == 0) {
outh = rte_pktmbuf_mtod_offset(mb[i], uint8_t *,
mb[i]->l2_len);
/* modify packet's layout */
inh = tun_process_step2(mb[i], ml[i], hl[i], adj,
to[i], tl, sqn + k);
/* update inner ip header */
update_tun_inb_l3hdr(sa, outh, inh);
/* update mbuf's metadata */
tun_process_step3(mb[i], sa->tx_offload.msk,
sa->tx_offload.val);
k++;
} else
dr[i - k] = i;
}
return k;
}
/*
* *process* function for tunnel packets
*/
static inline uint16_t
trs_process(const struct rte_ipsec_sa *sa, struct rte_mbuf *mb[],
uint32_t sqn[], uint32_t dr[], uint16_t num, uint8_t sqh_len)
{
char *np;
uint32_t i, k, l2, tl;
uint32_t hl[num], to[num];
struct rte_esp_tail espt[num];
struct rte_mbuf *ml[num];
/*
* remove icv, esp trailer and high-order
* 32 bits of esn from packet length
*/
const uint32_t tlen = sa->icv_len + sizeof(espt[0]) + sqh_len;
const uint32_t cofs = sa->ctp.cipher.offset;
/*
* to minimize stalls due to load latency,
* read mbufs metadata and esp tail first.
*/
for (i = 0; i != num; i++)
process_step1(mb[i], tlen, &ml[i], &espt[i], &hl[i], &to[i]);
k = 0;
for (i = 0; i != num; i++) {
tl = tlen + espt[i].pad_len;
l2 = mb[i]->l2_len;
/* check that packet is valid */
if (trs_process_check(mb[i], &ml[i], &to[i], espt[i],
hl[i] + cofs, tl) == 0) {
/* modify packet's layout */
np = trs_process_step2(mb[i], ml[i], hl[i], cofs,
to[i], tl, sqn + k);
update_trs_l3hdr(sa, np + l2, mb[i]->pkt_len,
l2, hl[i] - l2, espt[i].next_proto);
/* update mbuf's metadata */
trs_process_step3(mb[i]);
k++;
} else
dr[i - k] = i;
}
return k;
}
/*
* for group of ESP inbound packets perform SQN check and update.
*/
static inline uint16_t
esp_inb_rsn_update(struct rte_ipsec_sa *sa, const uint32_t sqn[],
uint32_t dr[], uint16_t num)
{
uint32_t i, k;
struct replay_sqn *rsn;
/* replay not enabled */
if (sa->replay.win_sz == 0)
return num;
rsn = rsn_update_start(sa);
k = 0;
for (i = 0; i != num; i++) {
if (esn_inb_update_sqn(rsn, sa, rte_be_to_cpu_32(sqn[i])) == 0)
k++;
else
dr[i - k] = i;
}
rsn_update_finish(sa, rsn);
return k;
}
/*
* process group of ESP inbound packets.
*/
static inline uint16_t
esp_inb_pkt_process(struct rte_ipsec_sa *sa, struct rte_mbuf *mb[],
uint16_t num, uint8_t sqh_len, esp_inb_process_t process)
{
uint32_t k, n;
uint32_t sqn[num];
uint32_t dr[num];
/* process packets, extract seq numbers */
k = process(sa, mb, sqn, dr, num, sqh_len);
/* handle unprocessed mbufs */
if (k != num && k != 0)
move_bad_mbufs(mb, dr, num, num - k);
/* update SQN and replay window */
n = esp_inb_rsn_update(sa, sqn, dr, k);
/* handle mbufs with wrong SQN */
if (n != k && n != 0)
move_bad_mbufs(mb, dr, k, k - n);
if (n != num)
rte_errno = EBADMSG;
return n;
}
/*
* Prepare (plus actual crypto/auth) routine for inbound CPU-CRYPTO
* (synchronous mode).
*/
uint16_t
cpu_inb_pkt_prepare(const struct rte_ipsec_session *ss,
struct rte_mbuf *mb[], uint16_t num)
{
int32_t rc;
uint32_t i, k;
struct rte_ipsec_sa *sa;
struct replay_sqn *rsn;
union sym_op_data icv;
struct rte_crypto_va_iova_ptr iv[num];
struct rte_crypto_va_iova_ptr aad[num];
struct rte_crypto_va_iova_ptr dgst[num];
uint32_t dr[num];
uint32_t l4ofs[num];
uint32_t clen[num];
uint64_t ivbuf[num][IPSEC_MAX_IV_QWORD];
sa = ss->sa;
/* grab rsn lock */
rsn = rsn_acquire(sa);
/* do preparation for all packets */
for (i = 0, k = 0; i != num; i++) {
/* calculate ESP header offset */
l4ofs[k] = mb[i]->l2_len + mb[i]->l3_len;
/* prepare ESP packet for processing */
rc = inb_pkt_prepare(sa, rsn, mb[i], l4ofs[k], &icv);
if (rc >= 0) {
/* get encrypted data offset and length */
clen[k] = inb_cpu_crypto_prepare(sa, mb[i],
l4ofs + k, rc, ivbuf[k]);
/* fill iv, digest and aad */
iv[k].va = ivbuf[k];
aad[k].va = icv.va + sa->icv_len;
dgst[k++].va = icv.va;
} else {
dr[i - k] = i;
rte_errno = -rc;
}
}
/* release rsn lock */
rsn_release(sa, rsn);
/* copy not prepared mbufs beyond good ones */
if (k != num && k != 0)
move_bad_mbufs(mb, dr, num, num - k);
/* convert mbufs to iovecs and do actual crypto/auth processing */
if (k != 0)
cpu_crypto_bulk(ss, sa->cofs, mb, iv, aad, dgst,
l4ofs, clen, k);
return k;
}
/*
* process group of ESP inbound tunnel packets.
*/
uint16_t
esp_inb_tun_pkt_process(const struct rte_ipsec_session *ss,
struct rte_mbuf *mb[], uint16_t num)
{
struct rte_ipsec_sa *sa = ss->sa;
return esp_inb_pkt_process(sa, mb, num, sa->sqh_len, tun_process);
}
uint16_t
inline_inb_tun_pkt_process(const struct rte_ipsec_session *ss,
struct rte_mbuf *mb[], uint16_t num)
{
return esp_inb_pkt_process(ss->sa, mb, num, 0, tun_process);
}
/*
* process group of ESP inbound transport packets.
*/
uint16_t
esp_inb_trs_pkt_process(const struct rte_ipsec_session *ss,
struct rte_mbuf *mb[], uint16_t num)
{
struct rte_ipsec_sa *sa = ss->sa;
return esp_inb_pkt_process(sa, mb, num, sa->sqh_len, trs_process);
}
uint16_t
inline_inb_trs_pkt_process(const struct rte_ipsec_session *ss,
struct rte_mbuf *mb[], uint16_t num)
{
return esp_inb_pkt_process(ss->sa, mb, num, 0, trs_process);
}