d/numam-spdk
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
45a3cb2be4
numam-spdk/lib/Makefile

66 lines
2.5 KiB
Makefile
Raw Normal View History

SPDK: Initial check-in Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
2015-09-21 15:52:41 +00:00
#
# BSD LICENSE
#
Remove year from copyright headers. Also add a space between Copyright and (c). The copyright year can be determined using git metadata. Also remove the duplicated "All rights reserved." - every instance of this line already has a corresponding "All rights reserved" immediately below it, except for examples/ioat/kperf/kmod/dma_perf.c, where I have added it manually. Performed using this command: git ls-files | xargs sed -i -e 's/Copyright(c) \(.*\) Intel Corporation. All rights reserved./Copyright (c) Intel Corporation./' Change-Id: I3779f404966800709024eb1eb66a50068af2716c Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
2016-01-26 17:47:22 +00:00
# Copyright (c) Intel Corporation.
SPDK: Initial check-in Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
2015-09-21 15:52:41 +00:00
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# * Neither the name of Intel Corporation nor the names of its
# contributors may be used to endorse or promote products derived
# from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
build: wrap $(CURDIR) relative paths in $(abspath) Resolve relative paths before using them to clean up command lines. This should also help shorten the overall command line length that gets embedded in the binary and used when locating the executable from a coredump. Change-Id: Ibff9849ede198bb04313496c8b7131485ffaf14f Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
2016-05-09 20:56:07 +00:00
SPDK_ROOT_DIR := $(abspath $(CURDIR)/..)
SPDK: Initial check-in Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
2015-09-21 15:52:41 +00:00
include $(SPDK_ROOT_DIR)/mk/spdk.common.mk
mk: add a lib deps file. By adding this file and modifying the way we define a couple of variables in the makefiles, we can actually avoid having to redefine the library dependencies on a per file basis. Change-Id: Ieab4aa1021b0341fc21e3b65677a9ad7f70559c2 Signed-off-by: Seth Howell <seth.howell@intel.com> Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466063 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com> Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
2019-08-22 17:26:08 +00:00
include $(SPDK_ROOT_DIR)/mk/spdk.lib_deps.mk
SPDK: Initial check-in Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
2015-09-21 15:52:41 +00:00
global: rename copy to accel The copy engine library, modules and public APIs have been renamed. Use of the word `copy` has been replaced with the word `accel` short for accelerator in preparation for adding new capabilities in the future. Additionally, APIs for what was previously called the `memcpy` engine have been renamed to identify the engine as a software accelerator. Signed-off-by: paul luse <paul.e.luse@intel.com> Change-Id: Ia607aa718416146fbba1e6792b8de0f66bd8a5de Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/576 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com> Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
2020-02-05 17:10:05 +00:00
DIRS-y += bdev blob blobfs conf accel event json jsonrpc \
mk: move log_rpc from inside log The log_rpc library has several dependencies which depend upon the log library. This creates a circular dependency chain that makes single threaded make unwieldy and makes multi-threaded make impossible. Change-Id: I35e6532afcabce0f25974ed97444a56975654904 Signed-off-by: Seth Howell <seth.howell@intel.com> Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465192 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com>
2019-08-14 16:19:22 +00:00
log log_rpc lvol net rpc sock thread trace util nvme vmd nvmf scsi \
ioat ut_mock iscsi notify
iscsi: Add an iscsi library. Change-Id: I28f3f4723a66f845eb478a6873d7aedb8f5409b8 Signed-off-by: Ben Walker <benjamin.walker@intel.com>
2016-08-02 16:34:45 +00:00
ifeq ($(OS),Linux)
bdev/nvme: always enable FTL FTL doesn't have any kind of special package requirements. It is getting pretty good traction in the community, so let's enable it by default. Note that we will disable FTL on FreeBSD. FTL uses CIRCLEQ which is not available on FreeBSD. Let's not spend time trying to get FTL to work on FreeBSD until there's a demand to do so. Signed-off-by: Jim Harris <james.r.harris@intel.com> Change-Id: I15525b6c4e6ee52f49adf74d55f9484fe08a6dcc Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452752 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Paul Luse <paul.e.luse@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com> Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com> Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
2019-04-30 22:57:29 +00:00
DIRS-y += nbd ftl
iscsi: Add an iscsi library. Change-Id: I28f3f4723a66f845eb478a6873d7aedb8f5409b8 Signed-off-by: Ben Walker <benjamin.walker@intel.com>
2016-08-02 16:34:45 +00:00
endif
mk: standardize DIRS-x assignments. Most of the assignments followed the DIRS-($(CONFIG_X)) pattern, but there were a couple of assignments using a different pattern. Change-Id: I7c80fec2813c32cb7676912d72805565f77b2e3d Signed-off-by: Seth Howell <seth.howell@intel.com> Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466469 Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com> Reviewed-by: Paul Luse <paul.e.luse@intel.com> Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com> Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
2019-08-27 20:07:56 +00:00
DIRS-$(CONFIG_OCF) += env_ocf
lib/idxd: add low level idxd library Module, etc., will follow. Notes: * IDXD is an Intel silicon feature available in future Intel CPUs. Initial development is being done on a simulator. Once HW is available and the code fully tested the experimental label will be lifted. Spec can be found here: https://software.intel.com/en-us/download/intel-data-streaming-accelerator-preliminary-architecture-specification * The current implementation will only work with VFIO. * DSA has a number of engines that can be grouped based on application need such as type of memory being served or QoS. Engines are processing units and are assigned to groups. Work queues are on device structures that act as front-end groups for queueing descriptors. Full details on what is configurable & how will come in later doc patches. * There is a finite number of work queue slots that are divided amongst the number of desired work queues in some fashion (ie evenly). * SW (outside of the idxd lib) is required to manage flow control, to not over-run the work queues.This is provided in the accel plug-in module. The upper layers use public API to manage this. * Work queue submissions are done with a 64 byte atomic instruction * The design here creates a set of descriptor rings per channel that match the size of the work queues. Then, an spdk_bit_array is used to make sure we don't overrun a queue. If there are not slots available, the operation is put on a linked list to be retried later from the poller. * As we need to support any number of channels (we can't limit ourselves to the number of work queues) we need to dynamically size/resize our per channel descriptor rings based on the number of current channels. This is done from upper layers via public API into the lib. * As channels are created, the total number of work queue slots is divided across the channels evenly. Same thing when they are destroyed, remaining channels with see the ring sizes increase. This is done from upper layers via public API into the lib. * The sim has 64 total work queue entries (WQE) that get dolled out to the work queues (WQ) evenly. Signed-off-by: paul luse <paul.e.luse@intel.com> Change-Id: I899bbeda3cef3db05bea4197b8757e89dddb579d Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1809 Community-CI: Mellanox Build Bot Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com> Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com> Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com> Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
2020-04-10 15:29:01 +00:00
DIRS-$(CONFIG_IDXD) += idxd
configure: unset CONFIG_VHOST on BSD Remove linux #ifdefs from the vhost code and just implicitly disable CONFIG_VHOST for BSD systems. This serves as cleanup. Change-Id: I8b0e0e8f80478f50ca8586cc974f7afcee2566f0 Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com> Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460562 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com> Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
2019-07-04 19:51:04 +00:00
DIRS-$(CONFIG_VHOST) += vhost
DIRS-$(CONFIG_VIRTIO) += virtio
reduce: add configure option --with-reduce required to build reduce. This depends on libpmem being installed. We still need to work out details in pkgdep.sh and vm_setup.sh. Some distributions like Ubuntu still require configuring extra package repositories to get libpmem packages. Signed-off-by: Jim Harris <james.r.harris@intel.com> Change-Id: I4e056ce1da9a1fecb4458f8f5e7ff5d61c422533 Reviewed-on: https://review.gerrithub.io/430646 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com>
2018-09-21 14:37:54 +00:00
DIRS-$(CONFIG_REDUCE) += reduce
make: add dependencies for the rte_vhost build. The dependencies between vhost and rte_vhost were not added during earlier changes. This change moves the rte_vhost directory up to the level of the other libraries and adds the proper dependencies for when it is linked. Change-Id: I089de1cd945062b64975a0011887700c0e38bb0f Signed-off-by: Seth Howell <seth.howell@intel.com> Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467700 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Paul Luse <paul.e.luse@intel.com> Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com>
2019-09-06 16:34:34 +00:00
DIRS-$(CONFIG_VHOST_INTERNAL_LIB) += rte_vhost
rdma: Intorduce RDMA providers RDMA provider is used as an abstraction layer and allows to add vendor specific verbs implementation. This patch adds an interface to create and destroy qpairs and its implementation using regular verbs API. Future patches will add functions to queue/flush Work Requests, enable usage of RDMA providers API in NVMEoF target/initiator and add Mellanox Direct Verbs implementation. This abstraction layer is flexible enough to add other vendor's implementations. The choice of a specific RDMA provider will be made at the configuration step, it doesn't add any runtime overhead. Change-Id: If8eec5bd45c82c71f73a14f6e84121cd02a1d65d Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com> Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1655 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Community-CI: Mellanox Build Bot Community-CI: Broadcom CI Reviewed-by: Seth Howell <seth.howell@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com> Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com>
2020-03-14 07:27:38 +00:00
DIRS-$(CONFIG_RDMA) += rdma
reduce: add configure option --with-reduce required to build reduce. This depends on libpmem being installed. We still need to work out details in pkgdep.sh and vm_setup.sh. Some distributions like Ubuntu still require configuring extra package repositories to get libpmem packages. Signed-off-by: Jim Harris <james.r.harris@intel.com> Change-Id: I4e056ce1da9a1fecb4458f8f5e7ff5d61c422533 Reviewed-on: https://review.gerrithub.io/430646 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com>
2018-09-21 14:37:54 +00:00
lib: use CONFIG_ENV to pick which env dir to build Previously, lib/Makefile just hard-coded env_dpdk in the list of directories to build; this won't work if the user has chosen a different env implementation via CONFIG_ENV (or configure --with-env). Modify lib/Makefile so that the user can either put their env implementation directly into SPDK's lib directory (like env_dpdk) or outside of the SPDK tree (in which case the user must handle building it before building SPDK). Change-Id: I77e0611152f97f7bd6efcff10ffadf2fb1b1167e Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com> Reviewed-on: https://review.gerrithub.io/412248 Tested-by: SPDK Automated Test System <sys_sgsw@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com>
2018-05-23 17:18:25 +00:00
# If CONFIG_ENV is pointing at a directory in lib, build it.
# Out-of-tree env implementations must be built separately by the user.
ENV_NAME := $(notdir $(CONFIG_ENV))
ifeq ($(abspath $(CONFIG_ENV)),$(SPDK_ROOT_DIR)/lib/$(ENV_NAME))
DIRS-y += $(ENV_NAME)
endif
nvmf: add NVMe over Fabrics userspace target Change-Id: I739916824d033bd1a8f8b7f5def09e58f23d13cb Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
2016-06-06 21:44:30 +00:00
SPDK: Initial check-in Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
2015-09-21 15:52:41 +00:00
.PHONY: all clean $(DIRS-y)
all: $(DIRS-y)
clean: $(DIRS-y)
include $(SPDK_ROOT_DIR)/mk/spdk.subdirs.mk
Reference in New Issue Copy Permalink