d/numam-spdk
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
efdd6edba2
numam-spdk/lib/Makefile

65 lines
2.4 KiB
Makefile
Raw Normal View History

SPDK: Initial check-in Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
2015-09-21 15:52:41 +00:00
#
# BSD LICENSE
#
Remove year from copyright headers. Also add a space between Copyright and (c). The copyright year can be determined using git metadata. Also remove the duplicated "All rights reserved." - every instance of this line already has a corresponding "All rights reserved" immediately below it, except for examples/ioat/kperf/kmod/dma_perf.c, where I have added it manually. Performed using this command: git ls-files | xargs sed -i -e 's/Copyright(c) \(.*\) Intel Corporation. All rights reserved./Copyright (c) Intel Corporation./' Change-Id: I3779f404966800709024eb1eb66a50068af2716c Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
2016-01-26 17:47:22 +00:00
# Copyright (c) Intel Corporation.
SPDK: Initial check-in Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
2015-09-21 15:52:41 +00:00
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# * Neither the name of Intel Corporation nor the names of its
# contributors may be used to endorse or promote products derived
# from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
build: wrap $(CURDIR) relative paths in $(abspath) Resolve relative paths before using them to clean up command lines. This should also help shorten the overall command line length that gets embedded in the binary and used when locating the executable from a coredump. Change-Id: Ibff9849ede198bb04313496c8b7131485ffaf14f Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
2016-05-09 20:56:07 +00:00
SPDK_ROOT_DIR := $(abspath $(CURDIR)/..)
SPDK: Initial check-in Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
2015-09-21 15:52:41 +00:00
include $(SPDK_ROOT_DIR)/mk/spdk.common.mk
Don't build lib/cunit if tests are disabled This makes it possible to build SPDK on a machine which doesn't have CUnit installed. Change-Id: Icb4c01092d1432fcff4bdbbfa01489d1ddfcdd8b Signed-off-by: Mike Playle <mplayle@solarflare.com> Reviewed-on: https://review.gerrithub.io/417663 Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com> Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
2018-06-26 16:33:20 +00:00
DIRS-y += bdev blob blobfs conf copy event json jsonrpc \
net: split sock abstraction into lib/sock This separates the network interface management code (interface.c and net_rpc.c) from the socket abstraction layer, which allows users that only want the socket abstraction to avoid pulling in the JSON RPC libraries. Change-Id: I9b00285a70bac0c74c73353cfa900d4f3b2e465f Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com> Reviewed-on: https://review.gerrithub.io/416475 Tested-by: SPDK Automated Test System <sys_sgsw@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com>
2018-06-21 22:40:18 +00:00
log lvol net rpc sock thread trace util nvme nvmf scsi ioat \
notify: add notification library This patch adds library that will provide ability to notify about events. On one side each spdk library can specify what kind of notification it can produce and on the other side libraries can fetch those notifications. Example is bdev module, which lib notify about added or removed bdev. Signed-off-by: Ben Walker <benjamin.walker@intel.com> Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com> Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com> Change-Id: Ia95e564a8a43400b2745d9de8217b9cc84cd1b16 Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/431920 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com>
2018-11-14 08:36:25 +00:00
ut_mock iscsi notify
iscsi: Add an iscsi library. Change-Id: I28f3f4723a66f845eb478a6873d7aedb8f5409b8 Signed-off-by: Ben Walker <benjamin.walker@intel.com>
2016-08-02 16:34:45 +00:00
ifeq ($(OS),Linux)
nbd: move nbd code to a new library This prepares for enabling nbd mounting as a service within existing applications. Signed-off-by: Jim Harris <james.r.harris@intel.com> Change-Id: I225ae20dc86b2d70a1a39a325e754b22f34feaee Reviewed-on: https://review.gerrithub.io/369674 Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com> Tested-by: SPDK Automated Test System <sys_sgsw@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com>
2017-07-14 22:20:19 +00:00
DIRS-y += nbd
CONFIG: add CONFIG_VHOST option (on by default) Change-Id: Ic493e5d4ebbd45370ddf0086cfe9e924d444c72f Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
2017-03-06 20:34:45 +00:00
DIRS-$(CONFIG_VHOST) += vhost
virtio: add new library `virtio` Exported lib/bdev/rte_virtio as a separate library not dependent on bdev. Virtio is now accessible via spdk_internal/virtio.h. The header is marked `internal`, as it's not meant to be used by end users. It's not handy to handle all backend-specific (e.g. Virtio-SCSI) logic in a user code. For now the Virtio interface is publicly exposed only via bdev_virtio module. We might want to consider adding a separate, public Virtio-SCSI library in the future. Note: this patch doesn't do any changes to the virtio code. Everything is moved 1:1. Change-Id: I805e5d12d265d82b0bc5784c89fbadb81abdb278 Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com> Reviewed-on: https://review.gerrithub.io/388166 Tested-by: SPDK Automated Test System <sys_sgsw@intel.com> Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com>
2017-11-20 12:17:52 +00:00
DIRS-$(CONFIG_VIRTIO) += virtio
iscsi: Add an iscsi library. Change-Id: I28f3f4723a66f845eb478a6873d7aedb8f5409b8 Signed-off-by: Ben Walker <benjamin.walker@intel.com>
2016-08-02 16:34:45 +00:00
endif
reduce: add configure option --with-reduce required to build reduce. This depends on libpmem being installed. We still need to work out details in pkgdep.sh and vm_setup.sh. Some distributions like Ubuntu still require configuring extra package repositories to get libpmem packages. Signed-off-by: Jim Harris <james.r.harris@intel.com> Change-Id: I4e056ce1da9a1fecb4458f8f5e7ff5d61c422533 Reviewed-on: https://review.gerrithub.io/430646 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com>
2018-09-21 14:37:54 +00:00
DIRS-$(CONFIG_REDUCE) += reduce
ftl: Initial implementation This patch adds core FTL (flash translation layer) submodules. On regular SSDs the FTL is part of firmware, whereas Open Channel enables moving it to the host and allows for having full controll of data placement on the device. Main functionalities added: * logical to physical address map * read / write buffer cache * wear-leveling * bad block management Change-Id: I5c28aa277b212734bd4b1f71ae386b3d6f8c3715 Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com> Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com> Signed-off-by: Jakub Radtke <jakub.radtke@intel.com> Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com> Reviewed-on: https://review.gerrithub.io/c/431322 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com>
2018-10-29 12:17:34 +00:00
DIRS-$(CONFIG_FTL) += ftl
reduce: add configure option --with-reduce required to build reduce. This depends on libpmem being installed. We still need to work out details in pkgdep.sh and vm_setup.sh. Some distributions like Ubuntu still require configuring extra package repositories to get libpmem packages. Signed-off-by: Jim Harris <james.r.harris@intel.com> Change-Id: I4e056ce1da9a1fecb4458f8f5e7ff5d61c422533 Reviewed-on: https://review.gerrithub.io/430646 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com>
2018-09-21 14:37:54 +00:00
lib: use CONFIG_ENV to pick which env dir to build Previously, lib/Makefile just hard-coded env_dpdk in the list of directories to build; this won't work if the user has chosen a different env implementation via CONFIG_ENV (or configure --with-env). Modify lib/Makefile so that the user can either put their env implementation directly into SPDK's lib directory (like env_dpdk) or outside of the SPDK tree (in which case the user must handle building it before building SPDK). Change-Id: I77e0611152f97f7bd6efcff10ffadf2fb1b1167e Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com> Reviewed-on: https://review.gerrithub.io/412248 Tested-by: SPDK Automated Test System <sys_sgsw@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com>
2018-05-23 17:18:25 +00:00
# If CONFIG_ENV is pointing at a directory in lib, build it.
# Out-of-tree env implementations must be built separately by the user.
ENV_NAME := $(notdir $(CONFIG_ENV))
ifeq ($(abspath $(CONFIG_ENV)),$(SPDK_ROOT_DIR)/lib/$(ENV_NAME))
DIRS-y += $(ENV_NAME)
endif
nvmf: add NVMe over Fabrics userspace target Change-Id: I739916824d033bd1a8f8b7f5def09e58f23d13cb Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
2016-06-06 21:44:30 +00:00
mk: add framework for defining inter-lib dependencies Currently only the iscsi => scsi dependency is defined to demonstrate how the framework behaves. Eventually, lib/Makefile will be populated with more lines of the form: DEPDIRS-iscsi : scsi log conf event This line will ensure that the iscsi subdirectory is built after the specified dependency directories. Then the lib/iscsi/Makefile also defines: DEP_LIBNAMES = scsi log conf event This line adds dependencies from the iscsi.so to the specified libraries. Ideally we could avoid this duplication by passing the DEPDIRS value to the lower level Makefile, but that breaks down when we start considering event/subsystems/* libraries. So for now we'll need to duplicate it. Incidentally, DPDK also duplicates the dependency information like this. While here, remove use of $(MAKESUBDIRFLAGS) in spdk.subdirs.mk - it was no longer used anywhere in the tree. Signed-off-by: Jim Harris <james.r.harris@intel.com> Change-Id: If63cbc10ffa18ac6361e4210bd6196ffe88bec43 Reviewed-on: https://review.gerrithub.io/429287 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com> Reviewed-by: Changpeng Liu <changpeng.liu@intel.com> Reviewed-by: Lance Hartmann <lance.hartmann@oracle.com> Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com> Reviewed-by: Seth Howell <seth.howell5141@gmail.com> Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com>
2018-10-12 21:09:41 +00:00
DEPDIRS-iscsi := scsi
notify: add notification library This patch adds library that will provide ability to notify about events. On one side each spdk library can specify what kind of notification it can produce and on the other side libraries can fetch those notifications. Example is bdev module, which lib notify about added or removed bdev. Signed-off-by: Ben Walker <benjamin.walker@intel.com> Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com> Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com> Change-Id: Ia95e564a8a43400b2745d9de8217b9cc84cd1b16 Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/431920 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Reviewed-by: Jim Harris <james.r.harris@intel.com>
2018-11-14 08:36:25 +00:00
DEPDIRS-bdev := notify
mk: add framework for defining inter-lib dependencies Currently only the iscsi => scsi dependency is defined to demonstrate how the framework behaves. Eventually, lib/Makefile will be populated with more lines of the form: DEPDIRS-iscsi : scsi log conf event This line will ensure that the iscsi subdirectory is built after the specified dependency directories. Then the lib/iscsi/Makefile also defines: DEP_LIBNAMES = scsi log conf event This line adds dependencies from the iscsi.so to the specified libraries. Ideally we could avoid this duplication by passing the DEPDIRS value to the lower level Makefile, but that breaks down when we start considering event/subsystems/* libraries. So for now we'll need to duplicate it. Incidentally, DPDK also duplicates the dependency information like this. While here, remove use of $(MAKESUBDIRFLAGS) in spdk.subdirs.mk - it was no longer used anywhere in the tree. Signed-off-by: Jim Harris <james.r.harris@intel.com> Change-Id: If63cbc10ffa18ac6361e4210bd6196ffe88bec43 Reviewed-on: https://review.gerrithub.io/429287 Tested-by: SPDK CI Jenkins <sys_sgci@intel.com> Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com> Reviewed-by: Changpeng Liu <changpeng.liu@intel.com> Reviewed-by: Lance Hartmann <lance.hartmann@oracle.com> Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com> Reviewed-by: Seth Howell <seth.howell5141@gmail.com> Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com> Reviewed-by: Ben Walker <benjamin.walker@intel.com>
2018-10-12 21:09:41 +00:00
SPDK: Initial check-in Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
2015-09-21 15:52:41 +00:00
.PHONY: all clean $(DIRS-y)
all: $(DIRS-y)
clean: $(DIRS-y)
include $(SPDK_ROOT_DIR)/mk/spdk.subdirs.mk
Reference in New Issue Copy Permalink