Only move nvmf_request definitions from nvmf_internal.h
for now. Subsequent patches will move more.
Change-Id: If47472542515fd050cc78d95540eb25beee59d2a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Fabric commands were skipping a step, so unify all
types of requests through the same completion path.
Change-Id: I5f38a7e1cdcdf33baf71486d5ddae9f5a6157fac
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The nvmf_request structure holds the pair of pointers
for rx_desc and tx_desc.
Change-Id: I3e735979bbdcdc0e70ad78762e289849d41158ba
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This moves some definitions from nvmf_spec.h to
nvme_spec.h based on the latest publication.
Change-Id: I51b0abd16f7d034696239894aea5089f8ac70c40
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Swap the order of checks in the failure check - if rc is not 0, addr may
be garbage.
Change-Id: I110710efd00397c777d59ac8b219ba3cc2156596
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The nvmf_request object is generic and is mapped 1:1 with rx_desc.
Change-Id: I397224a3859c3c93d6eca99f7ba7c53ce7963f57
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Instead of searching the global list of connections to find a matching
cm_id, we can just store the pointer back to the spdk_nvmf_conn in the
rdma_cm_id context field.
Change-Id: I39ea16be6a633a1136d65743747b63b600f20e63
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
All of the variables are private to conn.c, so they don't need global
visibility.
Change-Id: I7c24cfc6249a9f8164b162b4b8de0e24c452e0df
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
It is always set to nvmf_process_async_completion and is only used
within the library.
Also rename nvmf_process_async_completion to spdk_nvmf_request_complete
to clarify its purpose.
Change-Id: Ie737fb60688329bfe329a8553c4a40ff2e5f8f1d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Create spdk_nvmf_request_prep_data(), which handles SGL processing and
data transfer for all command types, and spdk_nvmf_request_exec(), which
executes a command after data transfer has completed.
Change-Id: I51c2196260dd0686db8acca4d8f7c93e17618c2f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The pending type can be determined based on the command opcode.
This also moves the "issue pending RDMA reads" case out of the I/O queue
handling into the generic continuation code; this should not make any
difference for the current case, since the Fabrics Connect command is
the only other continuation case currently, and there cannot be any
pending RDMA reads in that case.
Change-Id: Idddfa496b6e5b7e6da772aa3ab1b9d1a5344771f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
nvmf_connect_continue() no longer needs the RDMA-specific tx_desc.
Change-Id: I95f6938063e9853aa7dcd419f488b91422ff9b60
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Let the calling function handle the tx_desc if nvmf_connect_continue()
fails.
Change-Id: I25a8cbc4c3be0608bcec8db2fb8c50e55fbe3e8c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Everything necessary for processing an admin command is now stored in
nvmf_request.
Change-Id: I74e75a5b7bb3b406ad167c2b31cab1af7a1f270a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Everything necessary for processing an I/O is now stored in
nvmf_request.
Change-Id: I3f390707ebe83ea66a116dcfda4d0388a6823629
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Keep a pointer to the local bounce buffer in the transport-agnostic
struct nvmf_request rather than groveling in tx_desc/rx_desc to get it.
Change-Id: Ic328d8e2b3a15759ccb149a89fb3562e928ca500
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Now that we have xfer to track data direction, the length field can be
populated correctly for all transfers (including in-capsule data).
Change-Id: I7b2228f3fac80aab983a4103ba095c7bc38e0b21
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This field is used to decide whether data needs to be transferred back
to the host after a command is completed.
Previously, this was determined using the length field, and length was
cleared to 0 after a transfer was completed. However, length will be
used in future patches after a host to controller transfer completes, so
we need some other way to tell what kind of data transfer is required.
Change-Id: I6b27cf7816908394735fc95c15bd5eb40a7c0157
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
vtophys() was checking for out-of-range addresses incorrectly: vfn_2mb
is already shifted to account for 2 MB hugepages, but it was being
compared with a mask that did not account for the shift. This would
allow out-of-bounds access to the 128tb map array for certain invalid
addresses (it had no effect on addresses within the valid userspace
range).
Change-Id: Ida7455595e586494c9025f9ba65d050abb16b1b9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Other subsystems can depend on this one and then use
SPDK_RPC_REGISTER to register RPC functions.
Change-Id: I557f774331ce7146d299d06b3f81426e2103a11f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Since we used u64 to mask CPU cores, the available number of CPU
is 64, for default RTE_MAX_LCORE in DPDK, the value is 128, in some
cases(e.g.: when nr_io_queues > 4) we can get the wrong lcore ID.
Change-Id: Icc334b1bf5b068a310839118be341e61071cff65
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
A transfer using less than the total bounce buffer size is a normal
occurrence and not worthy of a tracelog. Also drop the pointless
conditional.
Change-Id: Ibcdcf693fea439d5034fa51b08b3fbd8fd7df8f2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Avoid using the RDMA-specific tx_desc when the transport-agnostic
nvmf_request will suffice.
Change-Id: Id35bbdfb353cb72e0feb4f5af19e5bd5c86d3ff4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Should set tx_desc=NULL here. If not,When
nvmf_post_rdma_recv(conn, rx_desc) fails,
we would make tx_desc deactive again, and
this is wrong.
Change-Id: Ieabc7e3864b7f124b003d052f66ab8799a1d632e
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The variable cur could be null, so if we use do while
will cause a segment fault
Change-Id: I19ec26e88948a0c3fd957e03e717b68750f40c62
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The conventional rule for returning errno is negative, hence there is no
need to modify caller's code to adjust this NVMe library.
Signed-off-by: Minfei Huang <mnghuan@gmail.com>
Signed-off-by: Minfei Huang <minfei.hmf@alibaba-inc.com>
If we just pass NULL to rdma_create_qp, it will do
the right thing.
Change-Id: I9621a5110ace6237a1e47c6e5defb4cac3afc4ae
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The wrappers are much simpler to use than the low
level ib verbs calls.
Change-Id: I4b09a96a60020bc27df9396d40d955733f618837
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
They are only ever called in sequence and do related
operations.
Change-Id: I825abe08deba1dafb405757bb4f2d52062a801ca
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This enables SPDK_NVMF_BUILD_ETC to be moved out of the library as well,
since only authfile was using it before
Change-Id: I10d1145881f9a0358d7effe2d2d9851899413e1b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
SPDK_NVMF_BUILD_ETC will be cleaned up in another commit; it is
currently used both in the lib and in nvmf_tgt.
Change-Id: Ibc5f15cc4341f9d52b29c84defcd332bec4a4d09
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Most of the #include statements in nvmf.h aren't part of the public API.
Change-Id: I0d43dd542a28744a91a4fd0c4c806a991d1e194e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
It is not part of the NVMf library's public API.
Change-Id: I665d5713343c9185cbdadaef4fedfdc83b8232d6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
There is only a single global g_nvmf_tgt that can be passed to this
function, so remove the parameter and use the global directly.
Change-Id: Ia1a2a1e6cd3801101ddeb4de5526dd115fa7ef8f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The section is really defining a subsystem as defined
by the NVMf specification. There does not appear to be
any need for a group of subsystems.
This change only updates the configuration file. It does
not remove all references to a subsystem group from
the code.
Change-Id: I38e62735a5ac924dcafacb3c9a332a103d751d4a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The specification refers to this concept as a Host,
so use that term. This only changes the configuration
file usage. Initiator groups are still referenced in
the code and will be removed later.
Change-Id: I897f4dbdfb65d94da1e5a77434fc07a2c18bcdc2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Eliminate the misconception of reactor, it actually not a subsystem.
Change-Id: I63ea46f0dfa34661f16526a71c47e8fba9813474
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
The index should be 0 for fabricintf.
Moreover, when there is no fabricintf found, error should
be returned
Change-Id: I3aa04566a5a318b8c921dd37c8573ed075254266
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
There is no logical split between nvmf.c and framework.c, so combine
them and drop nvmf.c.
Change-Id: I91230c01ed7f171bfed04456b0bfcf0e7ddbc263
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The mutex is initialized, but otherwise is unused.
Change-Id: Ia68adbd430fad391cc465c07dd6e937e90dd2c5c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The code that actually removed items from the list was removed in
addition to the free() call, which caused a hang on shutdown.
Change-Id: If0e843d0d0ebfa28638b12104da880e70b3e548a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously, there was no way to determine what namespace ID was assigned
when a namespace was created via the NVMe library interface.
Also drop the incorrect comment about calling
spdk_nvme_ctrlr_process_admin_completions(), since
spdk_nvme_ctrlr_create_ns() checks the admin queue internally.
Change-Id: If90a6e9fc773aefa220ebbf6effc2d033c9f20cc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This lets spdk_nvme_qpair fit in 128 bytes exactly.
Change-Id: I7c42582f22ece72a7f1d651468e63d4fe05babd6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Avoid potential double free cases.
This fixes a clang warning during scan-build.
Change-Id: I487d6fcd485d1f8ebb96b6f8cb54511628461f39
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
All trackers in outstanding_tr should have a non-NULL request. Add an
assert to verify this.
Fixes a clang warning during scan-build.
Change-Id: I0ac4d2bad17449f684808cbb98777627d890b65b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Document the requirement that qpair and cmd can't be NULL.
This placates clang, which previously generated a warning
during scan-build.
Change-Id: Ic2d5e808faee0028c890ce1312444fb3dc95f223
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These allow linear searches of the configuration file
sections.
Change-Id: I8d8b9594bc8a974c16d999689a6195434c1efac8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The user can determine whether submission queues will be placed in the
controller memory buffer by checking the controller options use_cmb_sqs
flag in the attach callback.
Change-Id: I8a925ef99a48665a0e2ffaa90d9ff2b79b90b2fa
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add a special "all" trace flag name to set or clear all registered trace
flags.
Change-Id: Ib579df7c41ce4aca72174e04734df20f2752035c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The D3700/D3600 series support Controller Memory Buffer(CMB) feature,
CMB is available for holding submission queues, for those controllers
which can support submission queues in CMB, user can set the option
whether to enable it or not.
Change-Id: I8b0dc9e28dd6f5bb01bee99a532087212c04e492
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
When recursively calling spdk_json_write_val() on another object or
array, the child call will handle printing out the whole
subobject/array, so the parent call should skip over all of its values.
Also fix the return value for the array/object case - if we get to the
end of the array or object, we should return 0 for success.
Change-Id: I1da80c88ab8759620114c1ab141baaaaf9f0023a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Resolve relative paths before using them to clean up command lines.
This should also help shorten the overall command line length that gets
embedded in the binary and used when locating the executable from a
coredump.
Change-Id: Ibff9849ede198bb04313496c8b7131485ffaf14f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch add support for Intel specific log pages :
marketing description page.
Change-Id: I87bccb2af286279598c9dd3c870094b384a0d2f7
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
For existing \file markers, move them to the top of the header and tweak
the wording for consistency.
Change-Id: Icce748effe4dbe97d79a8c87d31caf0ee5797058
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Function to trim leading and trailing whitespace from a string.
Originally based on code imported from istgt.
Change-Id: I87abe584130bdf4930098fadb8e57291f18eda7f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Parsing function for delimited strings with embedded quotes.
Originally based on code imported from istgt.
Change-Id: I448feb53ea232048ed8c68738e12bc3660eb4235
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add function to convert string to lowercase in place.
Originally based on code imported from istgt.
Change-Id: Ica9fe2208e6ee09b22c9a652a33c5affe5be23cc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
For those controllers which can support end-to-end data protection
feature, add the support in the driver layer.
Change-Id: Ifac3dd89dec9860773c850416a6116113a6ce22a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
When using DPDK PCI support via VFIO, the PCI device is reset
immediately before calling the PCI driver's init function. In some
cases, the device seems to not be ready to handle MMIO accesses right
away. Until the cause of this issue is fully understood, add a 500 ms
sleep as a workaround.
Change-Id: Ic893080a6f34d57eee80df3e6aa68c220c08df3e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
All children must be removed from a parent request before the parent is
freed.
Change-Id: I073ff0e9c5bcdd6181d90b918bfe4cce054f6c0b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Rename nvme_remove_child_request() to nvme_request_remove_child() and
move it next to nvme_request_add_child() to make the symmetry clear.
Change-Id: I78747c44ab3db1a656b33555a45f634dc5a55b31
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The NVMe specification recommends destroying all I/O submission and
completion queues before setting CC.SHN.
Change-Id: Iad71dd3fe03d897858034f3ca6ee02e0c55cc2b0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The NVMe specification recommends that orderly shutdown should just
write CC.SHN while the controller is still enabled rather than writing
CC.EN = 0 first.
This also allows removal of the now-unused nvme_ctrlr_disable() and
nvme_ctrlr_wait_for_ready() functions.
Change-Id: I4702ffda153f218ebb8ed92f0e36144b7ceded93
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This can happen if the controller is still resetting as the SPDK NVMe
driver takes control.
Change-Id: I263ae8f2e7b271e0448450557452a115c90c4fb6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch is used to handle the memory leak issue when
a parent nvme_request is free. In our current code,
we did not free the nvme_request allocated by the children
in the exceptional case.
Change-Id: Iabd1f1c3594af60c38e74e3d96c14f78d1aa1aed
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
This patch is used to add a nvme_request remove child
helpler function
Change-Id: I1e5bb228d53333ca3601f4ae30fcd801ea39e532
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Drop the "data_transfered" variable and just update length, since length
was not used otherwise after this point in the loop.
Change-Id: Icd2991e4e85de7e8c951ba14c441434e871ea4ef
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
If only one descriptor is needed, there is a special case in the spec for
SGL1 using the Data Block descriptor type. Add a comment to make it
clear what is going on.
Also tweak the SGL1 setup to copy from the first SGL descriptor list
element instead of relying on the last value from the loop above, since
that could be easily broken by accident.
Change-Id: I49ef97fe5bf18d2bf1d86b4310a7d3abdfd03e57
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
tr->u.sgl is already a struct spdk_nvme_sgl_descriptor pointer.
Change-Id: Ie2c8c052fc28e6369d1d095b8d566acae47975d1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
_nvme_qpair_build_hw_sgl_request() will only be called for payload_size
!= 0, so every SGL will have at least one segment. Drop the 'else' that
was handling nseg == 0, and add an assert to document the payload_size
requirement.
Change-Id: I48e2a862a7657ba85605c0d35c0b65dfac072167
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The assert is checking a variable that is invariant within the loop, so
move the assert up to the top of the function.
Change-Id: Iee7eea1736bc7f953665feb390c3d6340dbeffbc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This makes it easier to find the larger doc comments that produce separate
pages.
It also allows removing the lib/nvme directory from the Doxyfile, so
only the public API headers are used to generate documentation.
Change-Id: I8c46edb8067a91dda5b23fb0864efd3dd8aaeba5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
spdk_nvme_qpair_process_completions() is already documented in
spdk/nvme.h, so merge the doc comment from nvme_qpair.c into the public
header.
Change-Id: Id7722d99d209852ee64286e0a3fa127b863e10aa
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Don't allow the user to request more than the valid maximum number of
I/O queues (65535) or 0 I/O queues, since this can't be encoded.
Change-Id: I2d6e0bba03476085842bad683b273cdf9d6e6d5e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Per the NVMe spec, SGL segments must be Qword (8-byte) aligned. Add a
static assert to make sure this is true for the sgl member of struct
nvme_tracker (assuming the whole nvme_tracker is at least 8-byte aligned).
Change-Id: I827aa40b56de648d83f524a4f1e79c3202b676be
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
If the controller is failed, attempting to submit additional I/O is
futile - it will be immediately failed using the completion callback,
which can result in infinite recursion if the application code resubmits
I/Os on failure.
Instead, provide a way for request submission to indicate failure, and
use it to exit early if the controller is failed; this can only happen
when a reset failed (timed out).
If a request is submitted directly by the user when the controller has
failed, we can return an error code directly. For the case where I/O
was queued and is being resubmitted after a reset, we still need to call
the completion handler via _nvme_fail_request_ctrlr_failed().
Change-Id: I9e144328d524b25db2acf48e923b584746e8d0b6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Provide a new structure, spdk_nvme_ctrlr_opts, to let the user modify
the default controller initialization options during probe/attach.
Currently, only the number of queue pairs can be modified in this way;
other options will be added later.
Change-Id: Ie27b9429291d93a9353c0d820f0ad467d3b0e7cb
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add a parameter to each I/OAT library function that requires a channel
instead of implicitly using the thread-local channel registration model.
I/OAT channels are already reported by the spdk_ioat_probe() attach
callback, so no infrastructure for channel allocation is necessary.
Change-Id: I8731126fcaea9fe2bafc41a3f75c969a100ef8f0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Replace the previous code that allocated each tracker individually with
one large allocation per queue pair.
struct nvme_tracker is now explicitly padded to reach exactly 4096 bytes
to allow normal array indexing to work correctly while maintaining the
alignment requirement that ensures each tracker's PRP list does not
cross a page boundary.
This also allows removal of the act_tr array, since the tr array can be
indexed directly now, and each tracker can store its own active state.
Change-Id: Ia7c51735b96594d12f7f478cefcc4aedc84207ad
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The previous method for registering I/O queues did not allow the user
to specify queue priority for weighted round robin arbitration, and it
limited the application to one queue per controller per thread.
Change the API to require explicit allocation of each queue for each
controller using the new function spdk_nvme_ctrlr_alloc_io_qpair().
Each function that submits a command on an I/O queue now takes an
explicit qpair parameter rather than implicitly using the thread-local
queue.
This also allows the application to allocate different numbers of
threads per controller; previously, the number of queues was capped at
the smallest value supported by any attached controller.
Weighted round robin arbitration is not supported yet; additional
changes to the controller startup process are required to enable
alternate arbitration methods.
Change-Id: Ia33be1050a6953bc5a3cca9284aefcd95b01116e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Since the nvme_tracker struct was extended to allow space for 253 SGL
descriptors at 16 bytes each, we can use the same amount of space in the
other branch of the union to store 506 PRP list entries at 8 bytes each.
This increases the maximum supported I/O size for PRP-only devices from
128 KB to slightly under 2 MB.
Change-Id: I2b9905be41343ff360b4cdaccca87ea6f753e89c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Also add a compile-time assert to make sure this doesn't accidentally
break again in the future.
Change-Id: I4d18cfbf21392291e1bdd76eff055429009d28d6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
nvme_ctrlr_cmd_create_io_cq() was using the queue ID as the
IV (Interrupt Vector) field in the Create I/O Completion Queue command.
Since the SPDK NVMe driver does not enable interrupts, this is
misleading at best.
Change-Id: I3ea53701fdb9f21d9dc8d8fe20ccf2833b76cfbf
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch just implement the feature of format progress indicator.
the NVMe available does't support FPI currently.
Change-Id: Ie937591fb1720d8a062354322aabcc95ff14b2d3
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
This field is write-only in the current code; the NVMe library does
not track timeouts on requests.
Change-Id: I50e53bb3c299bf16912c48be8aad3eec829154af
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
When I/O spans a stripe boundary, the driver splits the request into
multiple requests, so for 1 segment memory larger than the stripe
size, we also need to split the segment memory.
Change-Id: I22ea5734d7066865a57a3c90fe18d5f76f373f1d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
For those NVMe controllers which can support SGL feature in
firmware, we will use SGL for scattered payloads.
Change-Id: If688e6494ed62e8cba1d55fc6372c6e162cc09c3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
nvme_spec.h already has a structure with the correct bitfields for the
CSTS register, so use it in struct spdk_nvme_registers.
Change-Id: Id0663aee2611fb5195f9012a3176799e32701bb0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This will be exposed in the public API. This rename is in a separate
commit to ease review.
Change-Id: I1b7fef36f85265db27935ac4d22ceef3c7282502
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Set up the infrastructure for creating I/O submission queues with
variable queue priority (QPRIO in Create I/O SQ command).
Currently, this is unused, since we always use the default arbitration
method (round robin), but it will allow reinitializing submission queues
with the correct priority once weighted round robin is supported.
Change-Id: I425003879e624cfcc9687bdc495b5c1726b5a8af
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This function no longer exists and was not part of the public API.
Change-Id: I94fd066b63e812367687d11bc00aa11ab88d4671
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Many of the internal controller initialization functions did not check
for allocation failure; add return codes and check them where
applicable.
Change-Id: Id1b33bb06fca84035369d8b7ecd4c36b8ba7134c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This function returns true if the namespace is active or false if it is
inactive (e.g. no namespace has been attached to the specified namespace
ID yet).
Also use the new function to add checks in the examples and tests where
applicable.
Change-Id: I35465b315ae1a1677c5a82191ad9b1da1c216d50
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Prepare for qpair to be exposed as part of the public API.
Change-Id: Ia63e863e95554adceeade20c829f12fe346375d5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
When multiple NVMe controllers are being initialized during
spdk_nvme_probe(), we can overlap the hardware resets of all controllers
to improve startup time.
Rewrite the initialization sequence as a polling function,
nvme_ctrlr_process_init(), that maintains a per-controller state machine
to determine which initialization step is underway. Each step also has
a timeout to ensure the process will terminate if the hardware is hung.
Currently, only the hardware reset (toggling of CC.EN and waiting for
CSTS.RDY) is done in parallel; the rest of initialization is done
sequentially in nvme_ctrlr_start() as before. These steps could also be
parallelized in a similar framework if measurements indicate that they
take a significant amount of time.
Change-Id: I02ce5863f1b5c13ad65ccd8be571085528d98bd5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This check was dead code, since both places that called
nvme_ctrlr_wait_for_ready() could only ever have cc.en = 1.
Remove the original nvme_ctrlr_wait_for_ready() wrapper and rename
_nvme_ctrlr_wait_for_ready() without the underscore to replace it.
Change-Id: I6c9aa6a5b93606fb89d168c23f6735fcf3a84eaa
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
In nvme_ctrlr_hw_reset(), if we encounter a controller whose CC.EN bit
is already 0 (controller is disabled), the previous code would enable
the controller just so that it could be disabled to get a full reset
(transition from CC.EN = 1 to CC.EN = 0). However, it is a safe
assumption that if CC.EN is already 0, the controller has just been
reset, so we don't need to reset it again.
This saves a significant amount of time (2+ seconds per controller with
Intel SSD DC P3700) during initialization for devices that were disabled
on startup.
Change-Id: I552b1f0f185a84a8a0ce57a93b012d9d5fe096f3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
cleanup.sh and unbind.sh have been combined into a single
setup.sh that takes one optional parameter (reset). If no
parameter is given, the script will automatically bind
all NVMe and IOAT devices to either uio_pci_generic
or vfio-pci, as appropriate based on IOMMU settings. If
the reset parameter is given, the devices will be bound back
to the appropriate kernel drivers.
Change-Id: I25db3234f1ecfb352a281e5093f4c1aa455152ae
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Explicitly include system headers for types that are used in public
headers.
These were being pulled in by example code, so SPDK itself would build,
but other apps that did not include stdbool.h would fail to compile when
including spdk/nvme.h.
Also include nvme.h first in nvme_internal.h so this case gets tested
during normal compilation.
Change-Id: I8ed0fc4e0dcf71551738c461b4b825cc2ee1d233
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
payload here is a pointer to the buffer, not a struct nvme_payload.
Use nvme_allocate_request_contig() and pass the length in bytes rather
than dwords.
Change-Id: Idbbb3614b1d69148fe041d26e0c148bd9ce53724
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The parent field is in the cache line of nvme_request that is only
supposed to be accessed for split (child) I/Os. All accesses to parent
are done from child-specific calls now, so it does not need to be
initialized in the common case of a non-split I/O.
nvme_request_add_child() will set parent when splitting occurs.
Change-Id: Ib86c16ba1ea2ce32f62079831101da2a099047af
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Allows simplification of _nvme_qpair_build_sgl_request(), which does not
need to know whether a request is a child or not.
This also removes a read of req->parent for non-split I/Os; the parent
field is in the section of nvme_request that is only intended to be
initialized for split I/Os, which should be detected by looking at
num_children.
Additionally, this fixes a potential problem if requests were nested
more than one level deep (e.g. req->parent was not the original user
request).
Change-Id: I3ea1dc134bbb1e3b8c6b5a479f5d760bd97ea848
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch fixes the following issues in ioat_impl.h
while CONFIG_PCIACCESS is set to n:
1 lack of the definition of ioat_pcicfg_unmap_bar.
2 Define a macro to remove the duplicated vendor code
for ioat_driver_id enumration.
Change-Id: I4011098ac296d1ec320bffb5ffa6e098b70a5545
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Building the tip of the spdk master against the dpdk-2.2.0 fails with
inappropriate RTE_CACHE_LINE_SIZE error. The simple reversal of the RTE
include file order below fixed it for me.
Change-Id: I8782b7ee21d7f185e6e678f874fbdab9403117a5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch is used to remove the duplicated code.
As we found the structure in "ifdef and else" are same.
Change-Id: I1717ce3dcc14134ac59c165d801e5e811b987be5
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
This patch is used to support spdk_pci_device_cfg read/write
with byte and word size.
Change-Id: I49084e231bd6b5f5b22180a3eb36ddad4430b3a4
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Move toward collecting PCI IDs, class codes, etc. in pci_ids.h instead
of individual device-specific headers.
Change-Id: Icff162d48ac663db71d0576ceee16a9bd7a751cd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
PCI_VENDOR_ID_INTEL -> SPDK_PCI_VID_INTEL
Also change the inclusion guard macro to be consistent with the other
SPDK headers.
Change-Id: I29346267172cb8c07cc4289eed4eca2d55e942d6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This doesn't need to be part of the public API. It is only used by the
NVMe quirk lookup tables.
Change-Id: I7662e333c70b7c5f814bd7c8a528b6bff1f0732e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Rename all functions with a spdk_ prefix, and provide enough of an API
to avoid apps needing to #include <pciaccess.h>.
The opaque type used in the public API for a PCI device is now
struct spdk_pci_device *.
Change-Id: I1e7a09bbc5328c624bec8cf5c8a69ab0ea8e8254
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is a step toward abstracting PCI access so that libpciaccess can be
swapped out more easily.
Change-Id: I5491459460cbfbd0be471f70f9d07a7eb3175234
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Instead of writing the completion doorbell once per completion,
just write it once at the end of the completion while loop.
This reduces the number of mmio writes by coalescing several
writes into one when we get multiple completions at a time.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3cc3864dcfe43186bec51be1a732e84ef3be05ae
Similar to the NVMe API change, this allows better abstraction of the
PCI subsystem.
Change-Id: I2b84d9c3c498a08d4451b4ff27d0865f0456c210
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch did the work to use pci related functions
provided by DPDK.
Change-Id: I263b79f1b42868ef0c1efcf1bc392a4b3a328e93
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
With CONFIG_PCIACCESS=y in CONFIG file, we can
use libpciaccess library; With CONFIG_PCIACCESS=n
in CONFIG file, we use pciaccess functions provided
in DPDK.
Change-Id: I786c5589b8e7909ba2e59d222938dd5ba45bf92d
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The new probing API will find all NVMe devices on the system and ask the
caller whether to attach to each one. The caller will then receive a
callback once each controller has finished initializing and has been
attached to the driver.
This will enable cleanup of the PCI abstraction layer (enabling us to
use DPDK PCI functionality) as well as allowing future work on parallel
NVMe controller startup and PCIe hotplug support.
Change-Id: I3cdde7bfab0bc0bea1993dd549b9b0e8d36db9be
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
For those Crystal Beach DMA channels which support block fill capability,
we add a fill API here that can zero out pages or fill them with a
fixed pattern.
Change-Id: I8a57337702b951c703d494004b111f6d206279fb
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
This patch adds Intel NVMe device list and overrides the
supported log pages according to the quirk list.
In particular, the READ_CMD_LATENCY and WRITE_CMD_LATENCY pages are
supported on Intel DC P3x00 devices despite not being listed in the
Intel vendor-specific log page directory.
Change-Id: I3a2b6a5fa142c6e9c93567df65e85980bd3c7cc0
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Also add a space between Copyright and (c).
The copyright year can be determined using git metadata.
Also remove the duplicated "All rights reserved." - every instance of
this line already has a corresponding "All rights reserved" immediately
below it, except for examples/ioat/kperf/kmod/dma_perf.c, where I have
added it manually.
Performed using this command:
git ls-files | xargs sed -i -e 's/Copyright(c) \(.*\) Intel Corporation. All rights reserved./Copyright (c) Intel Corporation./'
Change-Id: I3779f404966800709024eb1eb66a50068af2716c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
1 Add new API nvme_ctrlr_is_feature_supported().
2 Add unit test for new API.
Change-Id: Ia6d8710755c3b13984fca9d56700efe043be1402
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
This will allow replacing these _nvme_fail_request_bad_vtophys() calls
with the correct error later. vtophys is not actually used within the
SGL request builder, so this is the wrong error.
Change-Id: Ibc2a3b029a8abad1d563b9df200325d7d64498da
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
No code change, just moved into a function for readability.
Change-Id: I883443c06d961c6dbeffed1a6fb153177e6e3fcd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This cleans up the I/O splitting code somewhat.
It also moves the SGL payload function pointers up into the hot cache
section of struct nvme_request without pushing the other important
members past the cacheline boundary (because payload is now a union).
Change-Id: I14a5c24f579d57bb84d845147d03aa53bb4bb209
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
A namespace indicates support for reservations by reporting a non-zero
value in the Reservation Capabilities field in the Identify Namespace
data structure, and controller indicates support for reservation in the
Identify Controller data structure, Here we used namespace field as the
support flag.
Change-Id: I0e1e29548aa3fc8b6d3bbeb4149ec4864316f092
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Support for the Force Unit Access and Limited Retry
bits on reads and writes.
Change-Id: I9860848358377d63a967a4ba6ee9c061faf284d4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This patch is used to wrap the inner implementation
of libpciaccess and prepare for the same interface
to applications in the future patch
Change-Id: I4d40fae0bd86b451ed38dbfd9bcc015f9bfc8436
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
NVMe reservations provide capabilities that may be used by two or more
hosts to coordinate access to a shared namespace, here we add the 4
reservation commands: reservation register/acquire/release/report.
Change-Id: Ib03ae2120a57dd14aa64311a6ffeb39fda73018c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
For the purpose to support different types of input scattered payloads,
such as iovs or scattered list, we define common method in the NVMe
driver, users should implement their own functions to iterate each
segment memory.
Change-Id: Id2765747296a66997518281af0db04888ffc4b53
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Change nvme_ctrlr_is_log_page_supported() to match
nvme_ctrlr_cmd_get_log_page().
Change-Id: I4c8a1f11044b083f8f8990ef40a4f789fa3c24e3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Request allocation may fail, so we need a way to indicate failure to the
caller.
Change-Id: I278c3f42e4d2fa1902bb0ab33ad3bf7c7007fd0d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
1 Add supported log pages data structure.
2 Bulid up supported log pages when NVME start.
3 Provide unified API for getting log pages.
3 Unit test suit optimization base on above modification.
Change-Id: I03cdb93f5c94e6897510d7f19bc7d9f4e70f9222
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Use /sys/bus/pci/devices/.../driver to determine which driver is loaded
for a particular device.
Change-Id: I5859a776e524033e1c6d6ec3796b7e11bdcf0bc4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This more accurately represents what function it performs.
Also remove pci_device_has_uio_driver() from the public API. Callers
should use pci_device_has_non_uio_driver() instead.
Change-Id: I9623fe1345b43e981d5823804e33d01ac0d3bb1c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
nvme_ctrlr_process_io_completions() and
nvme_ctrlr_process_admin_completions() now return the number of
completions processed.
This also adds the possibility of returning an error from the
process_*_completions functions (currently unused, but this at least
gets the API ready in case error conditions are added later).
Change-Id: I1b32ee4f2f3c1c474d646fa2d6b8b7bbb769785f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This ensures that any uninitialized fields are 0/NULL so if
ioat_channel_start() fails, ioat_channel_destruct() will not try to free
bogus pointers.
Change-Id: I99278c9fa280cbcdf3f7448e77db3ac98b59cdd6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously, if nvme_allocate_request() failed in
nvme_ctrlr_construct_and_submit_aer(), there was no error checking, so a
NULL pointer would be dereferenced.
Add a return value to nvme_ctrlr_construct_and_submit_aer() so we can
signal failure to the caller. This can only really be reasonably
handled during initialization; when resubmitting a completed AER later,
there is nowhere to report failure, so the AER will just remain
unsubmitted.
Change-Id: I413eb6c21be01cd9a61e67f62f2d0b7170eabaa3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The ioat library currently only supports DMA copy operations, but the
hardware can do other types of transfers. Add a union of the hardware
descriptor structures to enable support for the other operations in the
future.
Also add a generic hardware descriptor type to allow access to the parts
of the descriptor that are common between all types.
Change-Id: I3b54421ce771f58b78910e790b53026f311f918e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
According to the specification, the dataset management for deallocate
attribute can support to 256 ranges, so we should use uint16_t
instead of uint8_t as the ranges parameter.
Change-Id: Ibacc00da8b4b9e2b2f3454d382aadf7ad353ff31
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The parent field is no longer used in the normal (non-split) I/O path,
so move it down to the default-uninitialized part of struct nvme_request
that is only touched for parent/child I/O.
This also puts it closer to other related fields (children,
child_tailq, parent_status) for improved readability.
Change-Id: I120df1df0c967d2f74daa6e97c0bc83626e3be7f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
nvme_qpair_submit_tracker() and nvme_qpair_manual_complete_request() are
only used from within nvme_qpair.c, so they can be static.
nvme_qpair_submit_tracker() is moved up to avoid needing a declaration
(no other code change).
nvme_ctrlr_hw_reset() is only used from within nvme_ctrlr.c, so it can
be static.
Change-Id: I9a7953d7baaec76e875dd535daf557ea24bef801
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
These delays are left over from early development. They are completely
unnecessary and not based on anything in the NVMe spec.
Startup time should be slightly improved (on the order of 100 ms in
normal cases).
Change-Id: I9068b1a0f42feabcfe656d68be91e05a56cc53a3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This lets us signal an error if the channel is halted in
ioat_process_channel_events().
Change-Id: Iffaf4fd1e27d1254f9d95a37d732ae4a5f3a0465
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Rather than individually allocating each ring entry, use two large
allocations, one for the hardware descriptors and one for the software
descriptor contexts.
This allows the use of simple array indexing on the rings and also
allows the removal of most of the software descriptor structure,
since the necessary information can be retrieved based on the ring
index now.
Change-Id: I73ef24450f69ca0fc35e350286282c6b1c77a207
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
NVMe doesn't require the specific 64-bit MMIO ordering on 32-bit
platforms performed in spdk_mmio_read_8(), but it doesn't hurt.
We have to pick one of the two possible orderings, so pick the one
required by I/OAT.
Change-Id: I2b909d64d0c077b797d0f64a11d78d1ecc55eec7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The ioat driver supports DMA engine copy offload hardware available on
Intel Xeon platforms.
Change-Id: Ida0b17b25816576948ddb1b0443587e0f09574d4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use $(CLEAN_C) throughout the Makefiles to clean up a consistent set of
generated files.
This also adds coverage files to the list of cleaned files.
Change-Id: Iceb922935a45c9eecbf2f3443bd0ee4f5c966825
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Most devices today support far fewer than 1024, but this is a
more reasonable default upper limit than the spec-defined 64K.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia8a6d80c3a5aa181f27c8354758c6ca468013d92
lib/memory was already using this pattern; extend it to lib/util and
lib/nvme.
Change-Id: I84a633d7805522fc94d8fc11ad5486ce552702e5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The .o files are always kept anyway, so there is no need for an explicit
rule.
Change-Id: Id1687ba89daabfda5802e4328deb127403277928
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add common $(COMPILE_C), $(LINK_C), and $(LIB_C) variables that contain
the commands to build a .o from a .c, an app from objects and libraries,
and a library from objects, respectively.
Change-Id: Ie2eaa13156b8bf3db7a4ffa66161382d829aef07
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
nvme_ctrlr_process_io_completions() now takes a second parameter,
max_completions, to let the user limit the number of I/Os completed on
each poll.
If there are many I/Os waiting to be completed, the
nvme_ctrlr_process_io_completions() function could run for a long time
before returning control to the user, so the max_completions parameter
lets the user have more control of latency.
Change-Id: I3173059d94ec1cc5dbb636fc0ffd3dc09f3bfe4b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
After converting is_resetting to bool, it is smaller and can be packed
more efficiently with is_failed and reordered after the larger fields
used in the I/O path.
Change-Id: Ifa2301eb61ce8d38eb5412cca61d2a91b1474101
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
It was previously uint32_t because it was accessed with special
uint32_t-only atomic read/write helper functions, but that was replaced
with normal variable accesses protected by a mutex.
Change-Id: I304a7ef8c723cb33fd08110b697f848823a163e7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Set SPDK_ROOT_DIR explicitly in each Makefile so that make from a
subdirectory will work (assuming all dependencies from the upper
directory have already been built). This allows partial rebuilds of the
source tree, as well as building the unit tests without requiring DPDK.
Change-Id: I3f65b805d490b40ff5ec53cceb61df542ce814f1
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This helps weed out functions that should be static, functions that are
not declared in public header files, and .c files that don't include
their .h interface headers.
Change-Id: Ie39f83ad4b320847e4a938bd1d4d0b4fa21c2ffa
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Fix all of the uses of __thread so they are at the beginning (similar to
e.g. static).
Don't actually enable -Wold-style-declaration, since clang doesn't
understand that.
Change-Id: I0dcbb758143eab90fc978334c8f256c6602cc4cd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The ioctl() calls in dev_get_blocklen() were checking for != 0 instead
of == 0, so the default path (512) was always being taken.
Change-Id: Ib0b016b1d453fb94d408063417b7485ff24ed220
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Rename the nvme_free_request macro to nvme_dealloc_request to match
nvme_alloc_request and add a wrapper function to nvme.c so that the
macro contents are only expanded once.
The DPDK nvme_impl.h uses rte_mempool_put(), which generates a large
amount of code inline. Moving this macro expansion to a wrapper
function avoids inlining it in the multiple places nvme_free_request()
gets called, most of which are error handling cases that are not in the
hot I/O path.
Change-Id: I64ea9c39ba47e26672eee8d5058f1489e07eee5b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Like sprintf() with automatic buffer allocation.
This should help to avoid fixed-size buffers in
non-performance-sensitive code that formats strings.
Change-Id: I35209ae84014ed5daf41baa5b03af8a5f6b02b8e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is the only place nvme_request_add_child() is used, so move it
nearby and make it static to allow the compiler to inline it.
Change-Id: If4a7e17fde0b0272e1d4432c1dcedbec27c25371
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move dependency includes into a new spdk.deps.mk file,
then include it at the end of Makefiles that build
source files.
Also add a test to autobuild.sh to confirm that
binaries are regenerated if we make after touching a
header file.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If6a1905706a840f92cbdf3ace7fbdb27fe2de213
Pull the almost-identical request splitting code for driver-assisted
striping and maximum I/O size into its own function,
_nvme_ns_cmd_split_request().
Change-Id: I3c15ac2073f8f5aec721c427199c8fb1a5d6a1fc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This helps enable FreeBSD, where pciaccess pci_device_has_kernel_driver()
is not functional. The function will return 0 if there is no driver
attached, or the Linux uio or FreeBSD nic_uio driver is attached. It will
return 1 otherwise.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0921e61c9040b1e0411b5dc40b36fc7f2721c8c5
The changes are minor:
- remove unneeded error.h
- replace PATH_MAX with a suitable local #define
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5aecf8b53e0ac7582f394c71b4668888a6c6292f
The Linux pagemap-based implementation obviously does not
work on FreeBSD. DPDK has data structures describing the huge
pages it has allocated, so use that instead when we need to
populate new 2MB mappings in our tables.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I924e104f42891aaa2f931159aabba2779f239e91
GCC generates a series of 64-bit MOV instructions for the memcpy() into
the submission queue. We can do better with 128-bit SSE2 instructions.
DPDK already has a memcpy implementation that is optimized for small
inline copies, so use it instead of memcpy.
Change-Id: I5f09259b4d5cb089ace4a8ea6d2078c03fee84f3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
No change in behavior, just a simplification.
We already have a check for retry, so pull the cb_fn check out and put
it under the !retry branch.
This makes it clearer that requests that are going to be retried will
not get their callbacks called.
Change-Id: I70c7067e550c7fca78b0441b5474833f73863315
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Since it is empty function. It can be deleted.
Add nvme_assert to fix issue reported by scan-build.
Change-Id: Ia0e8f656e1dac0da7ec72f8404469ea1b0dcb40e
Signed-off-by: Liang Yan <liangx.yan@intel.com>
This is the only place that was using printf directly in the NVMe
library. Replace it with the official nvme_printf logging mechanism.
Change-Id: I689a7c0854b5e47eb357150f814e347cd44be79c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
In nvme_qpair_complete_tracker, make sure we got a valid request in the
tracker that is being completed.
This should never occur in practice, but safeguard against it in case of
programmer error. Fixes a scan-build warning about potential NULL
dereference.
Change-Id: Id82af604d2a5ed5de0aeccf3affa1900f6712ebe
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Document the assumptions made by qpair_construct using asserts.
These values can't actually be 0 in practice due to the way they are
derived, but scan-build can't see that. It is also useful to have these
asserts in case of future modifications.
Change-Id: I546c057f5cbe7ccc62acd90b595e423cd450d86a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
nvme_dump_command is totally unused aside from the unit test.
nvme_dump_completion was used in qpair, but it can be replaced with the
equivalent nvme_qpair_print_completion.
Also added the missing nvme_completion fields to nvme_qpair_print_completion
that had been printed by nvme_dump_command.
Change-Id: Ia5ee66f3553df06febe8f465d42e49a84c555dd2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is calculated elsewhere now, so remove the comments around
nvme_qpair_construct calls.
Change-Id: I2dc4956a9e250b88e62038bc55cdd315940ad391
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
rc is reinitialized before it is ever read.
Change-Id: I9abbc256fb06022f3024b0aa3827be02a273f20a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
